TY - GEN A1 - Wolff, Christian Michael A1 - Canil, Laura A1 - Rehermann, Carolin A1 - Nguyen, Ngoc Linh A1 - Zu, Fengshuo A1 - Ralaiarisoa, Maryline A1 - Caprioglio, Pietro A1 - Fiedler, Lukas A1 - Stolterfoht, Martin A1 - Kogikoski, Junior, Sergio A1 - Bald, Ilko A1 - Koch, Norbert A1 - Unger, Eva L. A1 - Dittrich, Thomas A1 - Abate, Antonio A1 - Neher, Dieter T1 - Correction to 'Perfluorinated self-assembled monolayers enhance the stability and efficiency of inverted perovskite solar cells' (2020, 14 (2), 1445−1456) T2 - ACS nano Y1 - 2020 U6 - https://doi.org/10.1021/acsnano.0c08081 SN - 1936-0851 SN - 1936-086X VL - 14 IS - 11 SP - 16156 EP - 16156 PB - American Chemical Society CY - Washington, DC ER - TY - THES A1 - Wolff, Christian Michael T1 - Identification and reduction of losses in perovskite solar cells N2 - Perovskite solar cells have become one of the most studied systems in the quest for new, cheap and efficient solar cell materials. Within a decade device efficiencies have risen to >25% in single-junction and >29% in tandem devices on top of silicon. This rapid improvement was in many ways fortunate, as e. g. the energy levels of commonly used halide perovskites are compatible with already existing materials from other photovoltaic technologies such as dye-sensitized or organic solar cells. Despite this rapid success, fundamental working principles must be understood to allow concerted further improvements. This thesis focuses on a comprehensive understanding of recombination processes in functioning devices. First the impact the energy level alignment between the perovskite and the electron transport layer based on fullerenes is investigated. This controversial topic is comprehensively addressed and recombination is mitigated through reducing the energy difference between the perovskite conduction band minimum and the LUMO of the fullerene. Additionally, an insulating blocking layer is introduced, which is even more effective in reducing this recombination, without compromising carrier collection and thus efficiency. With the rapid efficiency development (certified efficiencies have broken through the 20% ceiling) and thousands of researchers working on perovskite-based optoelectronic devices, reliable protocols on how to reach these efficiencies are lacking. Having established robust methods for >20% devices, while keeping track of possible pitfalls, a detailed description of the fabrication of perovskite solar cells at the highest efficiency level (>20%) is provided. The fabrication of low-temperature p-i-n structured devices is described, commenting on important factors such as practical experience, processing atmosphere & temperature, material purity and solution age. Analogous to reliable fabrication methods, a method to identify recombination losses is needed to further improve efficiencies. Thus, absolute photoluminescence is identified as a direct way to quantify the Quasi-Fermi level splitting of the perovskite absorber (1.21eV) and interfacial recombination losses the transport layers impose, reducing the latter to ~1.1eV. Implementing very thin interlayers at both the p- and n-interface (PFN-P2 and LiF, respectively), these losses are suppressed, enabling a VOC of up to 1.17eV. Optimizing the device dimensions and the bandgap, 20% devices with 1cm2 active area are demonstrated. Another important consideration is the solar cells’ stability if subjected to field-relevant stressors during operation. In particular these are heat, light, bias or a combination thereof. Perovskite layers – especially those incorporating organic cations – have been shown to degrade if subjected to these stressors. Keeping in mind that several interlayers have been successfully used to mitigate recombination losses, a family of perfluorinated self-assembled monolayers (X-PFCn, where X denotes I/Br and n = 7-12) are introduced as interlayers at the n-interface. Indeed, they reduce interfacial recombination losses enabling device efficiencies up to 21.3%. Even more importantly they improve the stability of the devices. The solar cells with IPFC10 are stable over 3000h stored in the ambient and withstand a harsh 250h of MPP at 85◦C without appreciable efficiency losses. To advance further and improve device efficiencies, a sound understanding of the photophysics of a device is imperative. Many experimental observations in recent years have however drawn an inconclusive picture, often suffering from technical of physical impediments, disguising e. g. capacitive discharge as recombination dynamics. To circumvent these obstacles, fully operational, highly efficient perovskites solar cells are investigated by a combination of multiple optical and optoelectronic probes, allowing to draw a conclusive picture of the recombination dynamics in operation. Supported by drift-diffusion simulations, the device recombination dynamics can be fully described by a combination of first-, second- and third-order recombination and JV curves as well as luminescence efficiencies over multiple illumination intensities are well described within the model. On this basis steady state carrier densities, effective recombination constants, densities-of-states and effective masses are calculated, putting the devices at the brink of the radiative regime. Moreover, a comprehensive review of recombination in state-of-the-art devices is given, highlighting the importance of interfaces in nonradiative recombination. Different strategies to assess these are discussed, before emphasizing successful strategies to reduce interfacial recombination and pointing towards the necessary steps to further improve device efficiency and stability. Overall, the main findings represent an advancement in understanding loss mechanisms in highly efficient solar cells. Different reliable optoelectronic techniques are used and interfacial losses are found to be of grave importance for both efficiency and stability. Addressing the interfaces, several interlayers are introduced, which mitigate recombination losses and degradation. N2 - Auf der Suche nach neuen, kostengünstigen und effizienten Systemen zur photovoltaischen Energiegewinnung, sind Perowskit Solarzellen zu einem der am meistuntersuchtesten Systeme avanciert. Innerhalb einer Dekade konnten unabhängig zertifizierte Umwandlungseffizienzen von >25% in Einzelschicht- und >29% in Mehrschichtzellen basierend auf Siliziumzellen realisiert werden. Die schnelle Entwicklung war in vielerlei Hinsicht glücklich, da beispielsweise die Energielevel typischer Perowskitschichten mit bereits existierenden Kontaktschichtsystemen anderer Photovoltaiksysteme, wie etwa Farbstoffsolarzellen oder Organische Solarzellen, kompatibel sind. Trotz dieses schnellen Erfolges, müssen zur weiteren Effizienzsteigerung grundlegende Wirkprinzipien der Solarzellen verstanden werden. Diese Arbeit beschäftigt sich mit dem umfassenden Verständnis von Rekombinationsprozessen in voll funktionstüchtigen Bauteilen. Zunächst wird der Einfluss unterschiedlicher Energielevel einer Transportschicht, basierend auf Fullerenen untersucht. Dieses kontrovers diskutierte Thema wurde umfassend untersucht und Rekombinationsverluste aufgrund ungünstiger Energielevel reduziert indem - durch die Wahl unterschiedlicher Fulleren-Derivate - der energetische Abstand zwischen Leitungsband des Perowskit und dem niedrigsten unbesetzten Zustand des Fullerenes reduziert wird. Zusätzlich wurde eine ultradünne elektrisch isolierende Zwischenschicht eingebracht, die noch effektiver Rekombinationsverluste unterdrückt, ohne die Fähigkeit zur Ladungsextraktion - und damit Effizienz einzuschränken. Das breite Interesse tausender Forschenden weltweit hat zur schnellen Entwicklung besagter hoher Effizienzen geführt, obgleich verlässliche, leicht nachzuvollziehende Herstellungsprotokolle nicht existierten. Auf Basis der hier entwickelten Protokolle, werden Methoden dargestellt, mit denen verlässlich >20% effiziente Solarzellen produziert werden können. Hierbei wird insbesondere auf sogenannte invertierte (p-i-n) Zellen eingegangen, wobei ein Fokus auf der Beschreibung essentieller Faktoren wie Atmosphärenkontrolle, Temperaturkontrolle, Materialreinheit oder praktischer Erfahrung liegt. Analog zu verlässlichen Herstellungsmethoden bedarf es robuster Techniken um Rekombinationsverluste zu identifizieren und zu lokalisieren. Zu diesem Zweck wird die Messung der absoluten Photolumineszenzeffizienz eingeführt, die erlaubt die Aufspaltung der Quasi-Fermi Level des Perowskiten zu quantifizieren (1.22eV). Ebenso ist es mit dieser Methode möglich Rekombinationsverluste an Grenzflächen zu lokalisieren, die die Leerlaufspannung auf 1.1V limitieren. Zur Vermeidung dieser Verluste werden erneut ultradünne Zwischenschichten an sowohl der p- als auch n- Grenzschicht eingebracht (PFN-P2 und LiF), die Leerlaufspannungen von bis zu 1.17V ermöglichen. Mithilfe eines optimierten Designs und einer Reduzierung der Bandlücke können Bauteile mit 20% Effizienz bei einer Größe von 1cm2 realisiert werden. Nebst hoher Effizienz ist die Stabilität der Bauteile unter einsatzrelevanten Umweltbedingungen ein wichtiger Faktor auf dem Weg zu einer Kommerzialisierung. Dies gilt insbesondere für Hitze, Beleuchtung, elektrische Ladung oder eine Kombination letzterer. Perowskitschichten -- insbesondere diejenigen, die organische Kationen beinhalten -- sind wohlbekannt dafür unter genannten Bedingungen zu degradieren. Das Konzept der ultradünnen Zwischenschichten wird daher um eine Familie fluornierter selbstorganisierender molekularer Monoschichten erweitert X-PFC_n, wobei X ein Halogen I/Br darstellt und n = 7-12 die Länge der fluorinerten Alkylkette angibt), die an der n-Grenzfläche zum Einsatz kommen. Diese Zwischenschicht reduziert Rekombinationsverluste resultierend in 21.3% effizienten Bauteilen und ermöglicht zusätzlich eine drastische erhöhte Stabilität. Bauteile mit dem Molekül IPFC10 sind über 3000h stabil unter Lagerungsbedingungen im Dunkeln und überstehen 250h unter voller Last bei 85°C ohne nennenswerte Verluste. Weitere Fortschritte in der Steigerung der Effizienz sind nur zu erwarten, wenn eine vollständige Beschreibung der Wirkprinzipien und Schwachstellen vorliegt. Eine Vielzahl experimenteller Studien haben bisher jedoch ein lückenhaftes Bild gemalt. Häufig sind physikalische Beschränkungen, etwa die hohe Kapazität aufgrund der sehr dünnen Schichten dafür verantwortlich, dass Rekombinationsdynamiken durch kapazitive Entladungsprozesse verdeckt werden. Um diese Probleme zu umgehen, werden hocheffiziente Solarzellen mit einer Kombination mehrerer optischer und optoelektronischer Messmethoden untersucht. Dies ermöglicht die Rekombinationsdynamik mit einer Superposition aus Rekombination erster, zweiter und dritter Ordnung der Ladungsträgerdichte vollumfänglich zu beschreiben. Drift-Diffusions Simulationen unterstützen die experimentellen Ergebnisse, selbst unter Einbeziehung mobiler Ionen. Weiterhin wird in einem Übersichtsartikel ein Ausblick auf den gegenwärtigen Stand des Wissens im Bezug auf Rekombinationsverluste in besagten Solarzellen gegeben. Unterschiedliche Messmethoden werden vorgestellt und erfolgreiche Methoden zur Minderung genannter Verluste diskutiert. Insgesamt stellt diese Arbeit einen Fortschritt im Verständnis und der Verminderung unterschiedlicher Verlustprozesse dar. Mithilfe unterschiedlicher verlässlicher optoelektronischer Messmethoden, wird gezeigt, dass der Ursprung von Rekombinations- und Stabilitätsverlusten häufig an den Grenzflächen liegt. Mithilfe gezielt eingesetzter ultradünner Zwischenschichten werden diese Verluste reduziert und die Stabilität erhöht. T2 - Identifizierung und Reduzierung von Verlusten in Perowskit Solarzellen KW - perovskite solar cells KW - interfacial recombination KW - nonradiative losses KW - Perowskit Solarzellen KW - Grenzflächenrekombination KW - nichtstrahlende Verluste Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-479301 ER - TY - GEN A1 - Wenz, Leonie A1 - Levermann, Anders A1 - Willner, Sven N. A1 - Otto, Christian A1 - Kuhla, Kilian T1 - Post-Brexit no-trade-deal scenario: short-term consumer benefit at the expense of long-term economic development T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - After the United Kingdom has left the European Union it remains unclear whether the two parties can successfully negotiate and sign a trade agreement within the transition period. Ongoing negotiations, practical obstacles and resulting uncertainties make it highly unlikely that economic actors would be fully prepared to a “no-trade-deal” situation. Here we provide an economic shock simulation of the immediate aftermath of such a post-Brexit no-trade-deal scenario by computing the time evolution of more than 1.8 million interactions between more than 6,600 economic actors in the global trade network. We find an abrupt decline in the number of goods produced in the UK and the EU. This sudden output reduction is caused by drops in demand as customers on the respective other side of the Channel incorporate the new trade restriction into their decision-making. As a response, producers reduce prices in order to stimulate demand elsewhere. In the short term consumers benefit from lower prices but production value decreases with potentially severe socio-economic consequences in the longer term. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1208 KW - model KW - origins KW - chains KW - impact KW - costs Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525819 SN - 1866-8372 IS - 9 ER - TY - JOUR A1 - Wenz, Leonie A1 - Levermann, Anders A1 - Willner, Sven N. A1 - Otto, Christian A1 - Kuhla, Kilian T1 - Post-Brexit no-trade-deal scenario: short-term consumer benefit at the expense of long-term economic development JF - PLoS ONE N2 - After the United Kingdom has left the European Union it remains unclear whether the two parties can successfully negotiate and sign a trade agreement within the transition period. Ongoing negotiations, practical obstacles and resulting uncertainties make it highly unlikely that economic actors would be fully prepared to a “no-trade-deal” situation. Here we provide an economic shock simulation of the immediate aftermath of such a post-Brexit no-trade-deal scenario by computing the time evolution of more than 1.8 million interactions between more than 6,600 economic actors in the global trade network. We find an abrupt decline in the number of goods produced in the UK and the EU. This sudden output reduction is caused by drops in demand as customers on the respective other side of the Channel incorporate the new trade restriction into their decision-making. As a response, producers reduce prices in order to stimulate demand elsewhere. In the short term consumers benefit from lower prices but production value decreases with potentially severe socio-economic consequences in the longer term. KW - model KW - origins KW - chains KW - impact KW - costs Y1 - 2019 VL - 15 IS - 9 PB - PLOS CY - San Francisco ER - TY - JOUR A1 - Wang, Wei A1 - Seno, Flavio A1 - Sokolov, Igor M. A1 - Chechkin, Aleksei V. A1 - Metzler, Ralf T1 - Unexpected crossovers in correlated random-diffusivity processes JF - New Journal of Physics N2 - The passive and active motion of micron-sized tracer particles in crowded liquids and inside living biological cells is ubiquitously characterised by 'viscoelastic' anomalous diffusion, in which the increments of the motion feature long-ranged negative and positive correlations. While viscoelastic anomalous diffusion is typically modelled by a Gaussian process with correlated increments, so-called fractional Gaussian noise, an increasing number of systems are reported, in which viscoelastic anomalous diffusion is paired with non-Gaussian displacement distributions. Following recent advances in Brownian yet non-Gaussian diffusion we here introduce and discuss several possible versions of random-diffusivity models with long-ranged correlations. While all these models show a crossover from non-Gaussian to Gaussian distributions beyond some correlation time, their mean squared displacements exhibit strikingly different behaviours: depending on the model crossovers from anomalous to normal diffusion are observed, as well as a priori unexpected dependencies of the effective diffusion coefficient on the correlation exponent. Our observations of the non-universality of random-diffusivity viscoelastic anomalous diffusion are important for the analysis of experiments and a better understanding of the physical origins of 'viscoelastic yet non-Gaussian' diffusion. KW - diffusion KW - anomalous diffusion KW - non-Gaussianity KW - fractional Brownian motion Y1 - 2020 U6 - https://doi.org/10.1088/1367-2630/aba390 SN - 1367-2630 VL - 22 PB - Dt. Physikalische Ges. CY - Bad Honnef ER - TY - GEN A1 - Wang, Wei A1 - Seno, Flavio A1 - Sokolov, Igor M. A1 - Chechkin, Aleksei V. A1 - Metzler, Ralf T1 - Unexpected crossovers in correlated random-diffusivity processes N2 - The passive and active motion of micron-sized tracer particles in crowded liquids and inside living biological cells is ubiquitously characterised by 'viscoelastic' anomalous diffusion, in which the increments of the motion feature long-ranged negative and positive correlations. While viscoelastic anomalous diffusion is typically modelled by a Gaussian process with correlated increments, so-called fractional Gaussian noise, an increasing number of systems are reported, in which viscoelastic anomalous diffusion is paired with non-Gaussian displacement distributions. Following recent advances in Brownian yet non-Gaussian diffusion we here introduce and discuss several possible versions of random-diffusivity models with long-ranged correlations. While all these models show a crossover from non-Gaussian to Gaussian distributions beyond some correlation time, their mean squared displacements exhibit strikingly different behaviours: depending on the model crossovers from anomalous to normal diffusion are observed, as well as a priori unexpected dependencies of the effective diffusion coefficient on the correlation exponent. Our observations of the non-universality of random-diffusivity viscoelastic anomalous diffusion are important for the analysis of experiments and a better understanding of the physical origins of 'viscoelastic yet non-Gaussian' diffusion. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1006 KW - diffusion KW - anomalous diffusion KW - non-Gaussianity KW - fractional Brownian motion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-480049 SN - 1866-8372 IS - 1006 ER - TY - JOUR A1 - Wang, Wei A1 - Cherstvy, Andrey G. A1 - Chechkin, Aleksei V. A1 - Thapa, Samudrajit A1 - Seno, Flavio A1 - Liu, Xianbin A1 - Metzler, Ralf T1 - Fractional Brownian motion with random diffusivity BT - emerging residual nonergodicity below the correlation time JF - Journal of physics : A, Mathematical and theoretical N2 - Numerous examples for a priori unexpected non-Gaussian behaviour for normal and anomalous diffusion have recently been reported in single-particle tracking experiments. Here, we address the case of non-Gaussian anomalous diffusion in terms of a random-diffusivity mechanism in the presence of power-law correlated fractional Gaussian noise. We study the ergodic properties of this model via examining the ensemble- and time-averaged mean-squared displacements as well as the ergodicity breaking parameter EB quantifying the trajectory-to-trajectory fluctuations of the latter. For long measurement times, interesting crossover behaviour is found as function of the correlation time tau characterising the diffusivity dynamics. We unveil that at short lag times the EB parameter reaches a universal plateau. The corresponding residual value of EB is shown to depend only on tau and the trajectory length. The EB parameter at long lag times, however, follows the same power-law scaling as for fractional Brownian motion. We also determine a corresponding plateau at short lag times for the discrete representation of fractional Brownian motion, absent in the continuous-time formulation. These analytical predictions are in excellent agreement with results of computer simulations of the underlying stochastic processes. Our findings can help distinguishing and categorising certain nonergodic and non-Gaussian features of particle displacements, as observed in recent single-particle tracking experiments. KW - stochastic processes KW - anomalous diffusion KW - fractional Brownian motion KW - diffusing diffusivity KW - weak ergodicity breaking Y1 - 2020 U6 - https://doi.org/10.1088/1751-8121/aba467 SN - 1751-8113 SN - 1751-8121 VL - 53 IS - 47 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Wang, Qiong A1 - Smith, Joel A. A1 - Skroblin, Dieter A1 - Steele, Julian A. A1 - Wolff, Christian Michael A1 - Caprioglio, Pietro A1 - Stolterfoht, Martin A1 - Köbler, Hans A1 - Turren-Cruz, Silver-Hamill A1 - Li, Meng A1 - Gollwitzer, Christian A1 - Neher, Dieter A1 - Abate, Antonio T1 - Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells JF - Solar RRL N2 - Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells. KW - cesium lead halides KW - crystal orientation KW - inorganic perovskites KW - ISOS-L-1I protocol KW - phase purity KW - photostability Y1 - 2020 VL - 4 IS - 9 PB - WILEY-VCH CY - Weinheim ER - TY - GEN A1 - Wang, Qiong A1 - Smith, Joel A. A1 - Skroblin, Dieter A1 - Steele, Julian A. A1 - Wolff, Christian Michael A1 - Caprioglio, Pietro A1 - Stolterfoht, Martin A1 - Köbler, Hans A1 - Turren-Cruz, Silver-Hamill A1 - Li, Meng A1 - Gollwitzer, Christian A1 - Neher, Dieter A1 - Abate, Antonio T1 - Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1210 KW - cesium lead halides KW - crystal orientation KW - inorganic perovskites KW - ISOS-L-1I protocol KW - phase purity KW - photostability Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525374 SN - 1866-8372 IS - 9 ER - TY - JOUR A1 - Wang, Jingwen A1 - Rychkov, Dmitry A1 - Nguyen, Quyet Doan A1 - Gerhard, Reimund T1 - The influence of orthophosphoric-acid surface modification on charge-storage enhancement in polypropylene electrets JF - Journal of applied physics N2 - Bipolar electrets from polypropylene (PP) are essential, e.g., in electret air filters and in cellular-foam ferroelectrets. Therefore, the mechanism of surface-charge stability enhancement on PP electrets via orthophosphoric-acid surface treatment is investigated in detail. It is shown that the significant charge-stability enhancement can be mainly attributed to deeper surface traps originating from deposited chemicals and topographic features on the modified surfaces. Thermally stimulated discharge of chemically treated and non-treated PP films with different surface-charge densities is used to test the limits of the newly formed deep traps in terms of the capacity for hosting surface charges. When the initial surface-charge density is very high, more charges are forced into shallower original traps on the surface or in the bulk of the treated PP samples, reducing the effect of the deeper surface traps brought by the surface modification. The well-known crossover phenomenon (of the surface-charge decay curves) has been observed between modified PP electrets charged to +/- 2kV and to +/- 3kV. Acoustically probed charge distributions in the thickness direction of PP electrets at different stages of thermal discharging indicate that the deep surface trapping sites may have preference for negative charges, resulting in the observed asymmetric charge stability of the modified PP films. Y1 - 2020 U6 - https://doi.org/10.1063/5.0013805 SN - 0021-8979 SN - 1089-7550 VL - 128 IS - 3 PB - American Institute of Physics CY - Melville ER -