TY - THES A1 - Zeuschner, Steffen Peer T1 - Magnetoacoustics observed with ultrafast x-ray diffraction N2 - In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons. N2 - In der vorliegenden Arbeit untersuche ich die Gitterdynamik von magnetisch geordneten und dünnen Filmen, deren Spinsystem mit Femtosekunden-Laserpulsen angeregt und untersucht wird. Die Quantifizierung der laserinduzierten thermischen Dynamik, der erzeugten Pikosekunden-Schallpulse sowie deren jeweiliger Einfluss auf die Magnetisierungsdynamik ist ein schwieriges Unterfangen. Umso mehr ist die Entwicklung und Anwendung von effizienten experimentellen Konzepten und umfangreichen Modellen grundlegend für das Antreiben des zukünftigen wissenschaftlichen und technologischen Fortschritt. In jedem Experiment dieser kummulativen Dissertation untersuche ich das Kristallgitter von Nanometer dünnen Filmen nach der Anregung mit Femtosekunden-Laserpulsen. Die relative Änderung der Gitterkonstante, hervorgerufen durch thermische Ausdehnung oder Pikosekunden-Schallpulse, wird dabei direkt mittels ultraschneller Röntgenbeugung (UXRD) gemessen. Der Aufbau nutzt zur Bereitstellung von ultrakurzen Röntgenpulsen eine lasergetriebene Plasma-Röntgenquelle (PXS). Phononen und Spins üben gleichermaßen einen Druck auf das Gitter aus, welches entsprechend der elastsischen Eigenschaften des Materials reagiert, was das Gitter zu einem vielseitigen Sensor für ultraschenlle Wechselwirkungen macht. Zum einen untersuche ich Materialien mit starken magnetoelastischen Eigentschaften: die stark magnetostriktive Seltenen-Erden-Verbindung TbFe2, elementares Dysprosium oder das technologisch relavante Invar-Material FePt. Zum anderen habe ich eine umfangreiche Studie der Gitterdynamik von Bi1Y2Fe5O12 (Bi:YIG) angestellt, in dem der Literatur zufolge hochfrequente kohärente Spindynamiken durch Femtosekunden-Laseranregung zu beobachten sind. Diese stehenden Spinwellen (SSWs) höherer Ordnung entstehen durch die kohärente und inkohärente Bewegung von Atomen, in anderen Worten Phononen, welche ich durch UXRD vermessen habe. Somit sind wir in der Lage, die experimentellen Beobachtungen der Gitter- und Spindynamik qualitativ und quantitativ zu vereinigen. Dies geschieht durch eine Kombination von Viel-Temperatur- und Anisotropiemodellierung sowie elastische, magnetoelastische, und mikromagnetsiche Modelle. Die gemeinsamen Daten von UXRD und der zeitaufgelösten magnetooptischen Kerr-Effekt Messungen (tr-MOKE), um jeweils die Gitter- und Spindynamik zu messen, wurden in der Vergangenheit noch an unterschiedlichen experimentellen Aufbauten gemessen. Um die Quantifizierung präziser zu gestalten, haben wir in unserer Arbeitsgruppe UXRD und tr-MOKE in einem einzigen Aufbau kombiniert, welcher somit meines Wissens der erste seiner Art ist. Ich half bei dem Entwurf und der Inbetriebnahme des neuen Aufbaus, welcher die gleichzeitige Messung von Gitter- und Spindynamik auf einer ultraschnellen Zeitskala unter identischen Anregungsbedingungen ermöglicht. Außerdem entwickelte ich eine neue Messroutine für Röntgenbeugung, welche die Messzeit von UXRD-Experimenten um bis zu einer Größenordnungen reduziert. Es nennt sich das Schneiden des reziproken Raumes (reciprocal space slicing, RSS) und nutzt den Vorteil von Flächendetektoren die Bewegung von Beugungsreflexen zu detektieren, was von einer Änderung der Gitterkonstante einhergeht, ohne zeitintensive Scans der Beugungswinkel mit dem Goniometer durchzuführen. RSS ist besonders nützlich für ultraschnelle Beugungsexperimente, weil die Messzeit an Großgeräten wie Synchrotrons oder Freie Elektronen Laser eine seltene und teure Ressource ist. Darüber hinaus ist RSS nicht zwangsläufig auf die Anwendung in ultraschnellen Experimenten beschränkt und kann sogar auf andere Beugungsexperimente, wie die mit Neutronen und Elektronen, ausgeweitet werden. KW - ultrafast KW - X-ray diffraction KW - thin films KW - magnetoelasticity KW - ultraschnell KW - Röntgenbeugung KW - dünne Filme KW - Magnetoelastizität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-561098 ER - TY - THES A1 - Mayer, Dennis T1 - Time-resolved x-ray spectroscopy of 2-thiouracil T1 - Zeitaufgelöste Röntgenspektroskopie an 2-Thiouracil N2 - In this thesis, I present my contributions to the field of ultrafast molecular spectroscopy. Using the molecule 2-thiouracil as an example, I use ultrashort x-ray pulses from free- electron lasers to study the relaxation dynamics of gas-phase molecular samples. Taking advantage of the x-ray typical element- and site-selectivity, I investigate the charge flow and geometrical changes in the excited states of 2-thiouracil. In order to understand the photoinduced dynamics of molecules, knowledge about the ground-state structure and the relaxation after photoexcitation is crucial. Therefore, a part of this thesis covers the electronic ground-state spectroscopy of mainly 2-thiouracil to provide the basis for the time-resolved experiments. Many of the previously published studies that focused on the gas-phase time-resolved dynamics of thionated uracils after UV excitation relied on information from solution phase spectroscopy to determine the excitation energies. This is not an optimal strategy as solvents alter the absorption spec- trum and, hence, there is no guarantee that liquid-phase spectra resemble the gas-phase spectra. Therefore, I measured the UV-absorption spectra of all three thionated uracils to provide a gas-phase reference and, in combination with calculations, we determined the excited states involved in the transitions. In contrast to the UV absorption, the literature on the x-ray spectroscopy of thionated uracil is sparse. Thus, we measured static photoelectron, Auger-Meitner and x-ray absorption spectra on the sulfur L edge before or parallel to the time-resolved experiments we performed at FLASH (DESY, Hamburg). In addition, (so far unpublished) measurements were performed at the synchrotron SOLEIL (France) which have been included in this thesis and show the spin-orbit splitting of the S 2p photoline and its satellite which was not observed at the free-electron laser. The relaxation of 2-thiouracil has been studied extensively in recent years with ultrafast visible and ultraviolet methods showing the ultrafast nature of the molecular process after photoexcitation. Ultrafast spectroscopy probing the core-level electrons provides a complementary approach to common optical ultrafast techniques. The method inherits its local sensitivity from the strongly localised core electrons. The core energies and core-valence transitions are strongly affected by local valence charge and geometry changes, and past studies have utilised this sensitivity to investigate the molecular process reflected by the ultrafast dynamics. We have built an apparatus that provides the requirements to perform time-resolved x-ray spectroscopy on molecules in the gas phase. With the apparatus, we performed UV-pump x-ray-probe electron spectroscopy on the S 2p edge of 2-thiouracil using the free-electron laser FLASH2. While the UV triggers the relaxation dynamics, the x-ray probes the single sulfur atom inside the molecule. I implemented photoline self-referencing for the photoelectron spectral analysis. This minimises the spectral jitter of the FEL, which is due to the underlying self-amplified spontaneous emission (SASE) process. With this approach, we were not only able to study dynamical changes in the binding energy of the electrons but also to detect an oscillatory behaviour in the shift of the observed photoline, which we associate with non-adiabatic dynamics involving several electronic states. Moreover, we were able to link the UV-induced shift in binding energy to the local charge flow at the sulfur which is directly connected to the electronic state. Furthermore, the analysis of the Auger-Meitner electrons shows that energy shifts observed at early stages of the photoinduced relaxation are related to the geometry change in the molecule. More specifically, the observed increase in kinetic energy of the Auger-Meitner electrons correlates with a previously predicted C=S bond stretch. N2 - In dieser Arbeit präsentiere ich meine Beiträge zum Gebiet der ultraschnellen Molekülspektroskopie. Am Beispiel des Moleküls 2-Thiouracil verwende ich ultrakurze Röntgenpulse von Freie-Elektronen-Lasern, um die Relaxationsdynamik von Molekülproben in der Gasphase zu untersuchen. Unter Ausnutzung der für Röntgenstrahlung typischen Element- und Ortsselektivität untersuche ich den Ladungsfluss und die geometrischen Veränderungen in den angeregten Zuständen von 2-Thiouracil. Um die photoinduzierte Dynamik von Molekülen zu verstehen, ist das Wissen über die Grundzustandsstruktur und die Relaxation nach Photoanregung entscheidend. Daher befasst sich ein Teil dieser Arbeit mit der elektronischen Grundzustandsspektroskopie von 2-Thiouracil, um die Grundlage für die zeitaufgelösten Experimente zu schaffen. Viele der bisher veröffentlichten Studien, die sich mit der zeitaufgelösten Dynamik von Thiouracilen in der Gasphase nach UV-Anregung befassten, stützten sich zur Bestimmung der Anregungsenergien auf Informationen aus der Spektroskopie in Lösung. Dies ist nicht optimal, da Lösungsmittel das Absorptionsspektrum verändern und es daher keine Garantie dafür gibt, dass die Spektren in Lösung den Spektren der Gasphase ähneln. Daher habe ich die UV-Absorptionsspektren aller drei Thiouracile gemessen, um eine Referenz für die Gasphase zu erhalten, und in Kombination mit Berechnungen die an den Übergängen beteiligten angeregten Zustände bestimmt. Im Gegensatz zur UV-Absorption ist die Literatur zur Röntgenspektroskopie von thioniertem Uracil spärlich. Daher haben wir statische Photoelektronen-, Auger-Meitner- und Röntgenabsorptionsspektren an der Schwefel-L-Kante vor oder parallel zu den zeitaufgelösten Experimenten an FLASH (DESY, Hamburg) gemessen. Darüber hinaus wurden (bisher unveröffentlichte) Messungen am Synchrotron SOLEIL (Frankreich) durchgeführt, die in diese Arbeit eingeflossen sind und die Spin-Orbit-Aufspaltung der S 2p-Photolinie und ihres Satelliten zeigen, die am Freie-Elektronen-Laser nicht beobachtet wurde. Die Relaxation von 2-Thiouracil wurde in den letzten Jahren ausgiebig mit ultraschnellen Methoden im sichtbaren und ultravioletten Spektralbereich untersucht, die die ultraschnelle Natur des molekularen Prozesses nach der Photoanregung zeigen. Die ultraschnelle Spektroskopie, bei der die Elektronen des Kernniveaus untersucht werden, bietet einen ergänzenden Ansatz zu den üblichen optischen Techniken. Die Methode erhält ihre lokale Empfindlichkeit durch die stark lokalisierten Kernelektronen. Die Kernenergien und Kern-Valenz-Übergänge werden stark von lokalen Valenzladungs- und Geometrieänderungen beeinflusst, und frühere Studien haben diese Empfindlichkeit genutzt, um den molekularen Prozess zu untersuchen, der sich in der ultraschnellen Dynamik widerspiegelt. Wir haben eine Apparatur gebaut, die die Voraussetzungen für die Durchführung zeitaufgelöster Röntgenspektroskopie an Molekülen in der Gasphase bietet. Mit dieser Apparatur haben wir Anregungs-Abfrage-Elektronenspektroskopie an der S 2p-Kante von 2-Thiouracil an dem Freie-Elektronen-Laser FLASH2 durchgeführt. Zuerst triggert ein UV-Puls die Relaxationsdynamik und anschließend tastet ein Röntgenpuls das einzelne Schwefelatom im Inneren des Moleküls ab. Für die Analyse der Photoelektronenspektren habe ich eine Selbstrefernzierung der Photolinie implementiert, mit deren Hilfe der spektrale Jitter des FEL minimiert werden konnte. Dieser ist auf den zugrunde liegenden Prozess der selbstverstärkten spontanen Emission (SASE) zurückzuführen. Mit diesem Ansatz konnten wir nicht nur dynamische Veränderungen in der Bindungsenergie der Elektronen untersuchen, sondern auch ein oszillierendes Verhalten in der Verschiebung der beobachteten Photolinie feststellen, das wir mit einer nicht-adiabatischen Dynamik in Verbindung bringen, an der mehrere elektronische Zustände beteiligt sind. Außerdem konnten wir die UV-induzierte Verschiebung der Bindungsenergie mit dem lokalen Ladungsfluss am Schwefel in Verbindung bringen, der direkt mit dem elektronischen Zustand verbunden ist. Darüber hinaus zeigt die Analyse der Auger-Meitner-Elektronen, dass die in frühen Stadien der photoinduzierten Relaxation beobachteten Energieverschiebungen mit der Geometrieänderung des Moleküls zusammenhängen. Genauer gesagt korreliert der beobachtete Anstieg der kinetischen Energie der Auger-Meitner-Elektronen mit einer zuvor vorhergesagten Dehnung der C=S-Bindung. KW - thiouracil KW - ultrafast molecular dynamics KW - x-ray spectroscopy KW - Auger-Meitner electron spectroscopy KW - photoelectron spectroscopy KW - free-electron laser KW - FLASH KW - excited-state chemical shift KW - Thiouracil KW - ultraschnelle Moleküldynamik KW - Röntgenspektroskopie KW - Photoelektronenspektroskopie KW - pump-probe spectroscopy KW - Freie-Elektronen-Laser KW - Anregungs-Abfrage-Spektroskopie Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571636 ER - TY - THES A1 - Vu, Nils Leif T1 - A task-based parallel elliptic solver for numerical relativity with discontinuous Galerkin methods N2 - Elliptic partial differential equations are ubiquitous in physics. In numerical relativity---the study of computational solutions to the Einstein field equations of general relativity---elliptic equations govern the initial data that seed every simulation of merging black holes and neutron stars. In the quest to produce detailed numerical simulations of these most cataclysmic astrophysical events in our Universe, numerical relativists resort to the vast computing power offered by current and future supercomputers. To leverage these computational resources, numerical codes for the time evolution of general-relativistic initial value problems are being developed with a renewed focus on parallelization and computational efficiency. Their capability to solve elliptic problems for accurate initial data must keep pace with the increasing detail of the simulations, but elliptic problems are traditionally hard to parallelize effectively. In this thesis, I develop new numerical methods to solve elliptic partial differential equations on computing clusters, with a focus on initial data for orbiting black holes and neutron stars. I develop a discontinuous Galerkin scheme for a wide range of elliptic equations, and a stack of task-based parallel algorithms for their iterative solution. The resulting multigrid-Schwarz preconditioned Newton-Krylov elliptic solver proves capable of parallelizing over 200 million degrees of freedom to at least a few thousand cores, and already solves initial data for a black hole binary about ten times faster than the numerical relativity code SpEC. I also demonstrate the applicability of the new elliptic solver across physical disciplines, simulating the thermal noise in thin mirror coatings of interferometric gravitational-wave detectors to unprecedented accuracy. The elliptic solver is implemented in the new open-source SpECTRE numerical relativity code, and set up to support simulations of astrophysical scenarios for the emerging era of gravitational-wave and multimessenger astronomy. N2 - Elliptische partielle Differentialgleichungen sind in der Physik allgegenwärtig. Das elektrische Feld einer Ladung, die Gravitation der Erde, die Statik einer Brücke, oder die Temperaturverteilung auf einer heißen Herdplatte folgen trotz verschiedenster zugrundeliegender Physik elliptischen Gleichungen ähnlicher Struktur, denn es sind statische, also zeitunabhängige Effekte. Elliptische Gleichungen beschreiben auch astrophysikalische Szenarien von kataklysmischen Ausmaßen, die jegliche Gegebenheiten auf der Erde weit überschreiten. So werden Schwarze Löcher und Neutronensterne -- zwei mögliche Endstadien von massereichen Sternen -- ebenfalls von elliptischen Gleichungen beschrieben. In diesem Fall sind es Einstein's Feldgleichungen von Raum, Zeit, Gravitation und Materie. Da Schwarze Löcher und Neutronensterne mehr Masse als unsere Sonne auf die Größe einer Stadt wie Potsdam komprimieren übernimmt die Gravitation, und damit Einstein's allgemeine Relativitätstheorie, die Kontrolle. Es ist die Aufgabe der numerischen Relativität, Szenarien wie die Kollision solcher gewaltigen Objekte mithilfe von Supercomputern zu simulieren und damit die Gravitationswellensignale vorherzusagen, die von Detektoren auf der Erde gemessen werden können. Jede dieser Simulationen beginnt mit Anfangsdaten, die elliptische Gleichungen erfüllen müssen. In dieser Dissertation entwickle ich neue numerische Methoden um elliptische partielle Differentialgleichungen auf Supercomputern zu lösen, mit besonderem Augenmerk auf Anfangsdaten für Simulationen von Schwarzen Löchern und Neutronensternen. Ich entwickle dafür eine sogenannte discontinuous Galerkin Methode um elliptische Gleichungen auf Computern zu repräsentieren, sowie eine Reihe von Algorithmen um diese Gleichungen anschließend schrittweise numerisch zu lösen bis sie die notwendige Präzision erfüllen. Die Besonderheit dieser Algorithmen liegt in ihrer Eigenschaft, in viele Teilprobleme zerlegt auf einer großen Zahl von Rechenkernen parallel arbeiten zu können. Dieses task-based parallelism ermöglicht die effektive Verwendung von Supercomputern. Ich demonstriere die Fähigkeit meiner Algorithmen, Berechnungen von über 200 Millionen Unbekannten mit hoher Effizienz auf mindestens einige Tausend Rechenkerne verteilen zu können, und Anfangsdaten zweier sich umkreisender Schwarzer Löcher bereits etwa zehnmal schneller zu lösen als der langjährig verwendete Computercode SpEC. Außerdem zeige ich, dass mein neuer Code auch außerhalb der Relativitätstheorie anwendbar ist. Dazu simuliere ich thermisches Rauschen in den Beschichtungen von Spiegeln, das ebenfalls von elliptischen Gleichungen beschrieben wird. Solche Spiegel sind Objekt großen Forschungsinteresses, da sie ein zentrales Element von Gravitationswellendetektoren darstellen. Mein Code zur numerischen Lösung elliptischer Gleichungen ist Teil des kollaborativen und quelloffenen SpECTRE Forschungsprojekts zur Simulation astrophysikalischer Szenarien für die aufstrebende Ära der Gravitationswellen- und Multimessenger-Astronomie. KW - numerical relativity KW - task-based parallelism KW - discontinuous Galerkin methods KW - elliptic partial differential equations KW - black holes KW - initial data KW - high-performance computing KW - iterative methods for sparse linear systems KW - gravitational waves KW - thermal noise in mirror coatings KW - numerische Relativität KW - elliptische partielle Differentialgleichungen KW - schwarze Löcher KW - Anfangsdaten KW - Hochleistungscomputer KW - iterative Methoden zur Lösung linearer Systeme KW - Gravitationswellen KW - thermisches Rauschen in Spiegelbeschichtungen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-562265 ER - TY - JOUR A1 - Regenstein, Wolfgang T1 - Statistische Beschreibung des Resonanzenergietransfers in Lösungen N2 - In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to Förster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example. N2 - Beim Resonanzenergietransfer werden Fotonen von einem angeregten Donator über einen Wechselwirkungsabstand auf einen Akzeptor übertragen. Nach der quantenmechanischen Theorie von FÖRSTER kann dieser Abstand mit Hilfe des Überlappungsintegrals von Fluoreszenzspektrum des Donators und Absorp-tionsspektrum des Akzeptors berechnet werden. Eine andere Möglichkeit der Bestimmung erhält man mit Hilfe von statistischen Modellen, die in einem Überblick zusammengestellt sind. Dabei kann der Abstand durch Auswertung der Löschkurve bestimmt werden. In dieser Arbeit wird dazu eine weitere statistische Variante der Bestimmung des Wechselwirkungsradius hinzugefügt und an einem Beispiel ausführlich demonstriert. KW - resonant energy transfer KW - statistical models KW - theory of Förster KW - quenching curve KW - interaction distance KW - Resonanzenergietransfer KW - statistische Modelle KW - Theorie von Förster KW - Löschkurve KW - Wechselwirkungsabstand Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565009 ER - TY - GEN A1 - Xu, Pengbo A1 - Zhou, Tian A1 - Metzler, Ralf A1 - Deng, Weihua T1 - Stochastic harmonic trapping of a Lévy walk: transport and first-passage dynamics under soft resetting strategies T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We introduce and study a Lévy walk (LW) model of particle spreading with a finite propagation speed combined with soft resets, stochastically occurring periods in which an harmonic external potential is switched on and forces the particle towards a specific position. Soft resets avoid instantaneous relocation of particles that in certain physical settings may be considered unphysical. Moreover, soft resets do not have a specific resetting point but lead the particle towards a resetting point by a restoring Hookean force. Depending on the exact choice for the LW waiting time density and the probability density of the periods when the harmonic potential is switched on, we demonstrate a rich emerging response behaviour including ballistic motion and superdiffusion. When the confinement periods of the soft-reset events are dominant, we observe a particle localisation with an associated non-equilibrium steady state. In this case the stationary particle probability density function turns out to acquire multimodal states. Our derivations are based on Markov chain ideas and LWs with multiple internal states, an approach that may be useful and flexible for the investigation of other generalised random walks with soft and hard resets. The spreading efficiency of soft-rest LWs is characterised by the first-passage time statistic. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1262 KW - diffusion KW - anomalous diffusion KW - stochastic resetting KW - Levy walks Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560402 SN - 1866-8372 SP - 1 EP - 28 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - GEN A1 - Teichmann, Erik A1 - Lewandowski, Heather J. A1 - Alemani, Micol T1 - Investigating students’ views of experimental physics in German laboratory classes T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students’ attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students’ views and beliefs about experimental physics. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1263 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560429 SN - 1866-8372 SP - 010135-1 EP - 010135-17 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Schemenz, Victoria T1 - Correlations between osteocyte lacuno-canalicular network and material characteristics in bone adaptation and regeneration T1 - Korrelationen zwischen dem lakuno-kanalikulären Netzwerk der Osteozyten und Materialeigenschaften bei der Knochenanpassung und -regeneration N2 - The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue. The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles. First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions. In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone. Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir. For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34% lower and the lacunar volume 40% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing. A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles. In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment. N2 - Knochen haben eine komplexe hierarchische Struktur, die einen lebenslangen Umbauprozess durchläuft, bei dem der Knochen sich seinen mechanischen Anforderungen anpasst. Um ein gesundes und stabiles Organ zu erhalten müssen Knochenresorption (durch Osteoklasten) und Knochenbildung (durch Osteoblasten) ausgewogen sein. Osteozyten lenken dieses Wechselspiel, indem sie mechanische Belastungen wahrnehmen und sie in biochemische Signale übersetzen. Die Osteozyten sitzen in Lakunen und sind durch Kanälchen untereinander und mit anderen Knochenzellen über ein Netzwerk (LCN) verbunden, das in der Lage ist, Ionen zu transportieren und eine Kommunikation von Zelle zu Zelle zu ermöglichen. Außerdem vermutet man, dass Osteozyten auch durch direkte Wechselwirkungen mit der umgebenden Matrix zur Mineralhomöostase beitragen könnten. Im Mittelpunkt dieser Arbeit steht die Frage, ob Osteozyten ihre materielle Umgebung aktiv verändern können. Um Spuren dieser Wechselwirkung zwischen Osteozyten und der extrazellulären Matrix nachzuweisen, werden materialwissenschaftliche Charakterisierungsmethoden eingesetzt. Zunächst wurden gesunde Mäuseknochen charakterisiert. Die erworbenen Ergebnisse wurden dann mit drei murinen Modellsystemen verglichen: 1) einem Belastungsmodell; 2) ein Heilungsmodell und 3) ein Krankheitsmodell, bei dem das Fbn1-Gen dysfunktional ist und Defekte in der Bildung des extrazellulären Gewebes verursacht werden. Die Messstrategie umfasste Routinen, die es ermöglichen, die Organisation des LCN und der Materialkomponenten (d.h. die organische Kollagenmatrix und die mineralischen Partikel) in denselben Knochenvolumina zu analysieren und die räumliche Verteilung der verschiedenen Datensätze zu vergleichen. Die dreidimensionale Netzwerkarchitektur des LCN wird durch konfokale Laser-Scanning-Mikroskopie nach Rhodamin-Färbung gemessen und anschließend quantifiziert. Der Kalziumgehalt wird mittels quantitativer Rückstreuelektronenbildgebung bestimmt, während Klein- und Weitwinkel-Röntgenstreuung verwendet werden, um die Dicke und Länge der Mineralpartikel zu bestimmen. Zunächst wurden Querschnitte der Unterschenkel von gesunden Mäusen charakterisiert, um zu untersuchen, ob Veränderungen in der LCN-Architektur auf Wechselwirkungen von Osteozyten mit der umgebenden Knochenmatrix zurückgeführt werden können. Die Kortizes zeigten zwei Hauptregionen, ein Band mit ungeordneter LCN-Architektur, umgeben von einer Region mit geordneter LCN. Die ungeordnete Region ist ein Überbleibsel der frühen Knochenbildung und wies kurze und dünne Mineralpartikel auf. Der umgebende, stärker ausgerichtete Knochen zeigte ein geordnetes und dichtes LCN, sowie dickere und längere Mineralpartikel. Der Kalziumgehalt blieb bei beiden Regionen unverändert. Im Mausbelastungsmodell wurde das linke Schienbein zwei Wochen lang mechanisch stimuliert, was zu einer erhöhten Knochenbildung führt. Hier sollte die Forschungsfrage beantwortet werden, wie sich Knochenmaterialeigenschaften an (Re-)Modellierungsstellen aufgrund von Belastung ändern. Der, als Reaktion auf die mechanische Stimulation, gebildete neue Knochen zeigte ähnliche Eigenschaften in Bezug auf die Mineralpartikel, wie die geordnete Kortexregion. Es gab eine klar erkennbare Grenze zwischen reifem und neu gebildetem Knochen. Trotzdem gingen einige Kanälchen durch diese Grenze, die die LCN aus reifem und neu gebildetem Knochen verband. Für das Heilungsmodell wurden die Oberschenkel von Mäusen einer Osteotomie unterzogen (einer Operation, bei der durch einen Schnitt in der Diaphyse ein Bruch erzeugt wird). Danach konnte die Fraktur 21 Tage heilen. Dadurch konnten in diesem Modell gleichzeitig verkalkter Knorpel, knöcherner Kallus und Kortex untersucht werden. Dafür wurde die räumliche Verteilung der LCN-Topologie sowie die Mineraleigenschaften der verschiedenen Gewebetypen und ihrer Grenzflächen visualisiert und verglichen. Alle Gewebetypen zeigten strukturelle Unterschiede über mehrere Längenskalen hinweg. Der Kalziumgehalt nahm von kalzifiziertem Knorpel zu knöchernem Kallus zu lamellarem kortikalem Knochen zu und wurde homogener. Der Grad der LCN-Organisation nahm ebenfalls zu, während die Lakunen vom Kallus zum Kortexgewebe kleiner wurden, ebenso wie die Lakunendichte. Im verkalkten Knorpel waren die Mineralpartikel kurz und dünn. Der größte Teil des Kallus wies eine Geflechtsknochenstruktur auf und diente als Gerüst für lamellares Gewebe, das dünnere Mineralpartikel, aber einen höheren Grad an Ausrichtung sowohl in den Mineralpartikeln als auch im LCN aufwies. Der Kortex zeigte die höchsten Werte für Minerallänge, Dicke und Orientierungsgrad. Obwohl nur wenige Kanälchen den Kallus und kortikale Regionen verbinden, weist dies darauf hin, dass eine Kommunikation zwischen Osteozyten beider Gewebe möglich sein sollte. Es wurde auch ein Mausmodell für das Marfan-Syndrom untersucht, das einen Gendefekt im Fibrillin-1-Gen beinhaltet. Beim Menschen ist das Marfan-Syndrom durch eine Reihe klinischer Symptome gekennzeichnet, wie z. B. übermäßiges Wachstum der Gliedmaßen, überstreckbare Gelenke, verringerte Knochenmineraldichte, beeinträchtigte Knochenmikroarchitektur und erhöhte Frakturraten. Somit scheint Fibrillin-1 eine Rolle in der Skeletthomöostase zu spielen. Deswegen untersuchte die vorliegende Arbeit, ob und wie das Marfan-Syndrom die LCN-Architektur und die umgebende Knochenmatrix verändert. Die Mäuse mit Marfan-Syndrom zeigten bereits ab einem Alter von sieben Wochen längere Schienbeine als ihre gesunden Wurfgeschwister. Im Gegensatz dazu erschien die kortikale Entwicklung verzögert, was über alle gemessenen Merkmale hinweg beobachtet wurde, d.h. niedrigere endokortikale Knochenbildung, lockereres und weniger organisiertes LCN, geringerer Grad an Kollagenorientierung sowie ein Trend zu dünneren und kürzeren Mineralpartikel. In jedem der drei Modellsysteme fand diese Studie, dass Änderungen in der LCN-Architektur räumlich mit Parametern des Knochenmatrixmaterials korrelierten. Obwohl der genaue Mechanismus nicht bekannt ist, liefern diese Ergebnisse Hinweise darauf, dass Osteozyten ein Mineralreservoir aktiv manipulieren können. Dieses Reservoir befindet sich um die Kanälchen herum und dieser Prozess würde es ermöglichen, einen schnell zugänglichen Beitrag zur Mineralhomöostase zu leisten. Diese Interaktion ist jedoch höchstwahrscheinlich nicht einseitig, sondern könnte als Wechselspiel zwischen Osteozyten und extrazellulärer Matrix verstanden werden, da die Knochenmatrix biochemische Signalmoleküle enthält, die das Verhalten von Osteozyten verändern können. Knochen(re)modellierung kann daher nicht nur als Methode zur Defektbeseitigung oder Anpassung an äußere mechanische Reize verstanden werden, sondern auch zur Effizienzsteigerung möglicher Osteozyten-Mineral-Interaktionen während der Knochenhomöostase. Angesichts dieser Ergebnisse erscheint es sinnvoll, Osteozyten als Ziel für die Arzneimittelentwicklung im Zusammenhang mit Knochenerkrankungen in Betracht zu ziehen, die Veränderungen der Knochenzusammensetzung und deren mechanischen Eigenschaften verursachen. KW - bone KW - lacunae KW - mineralization KW - SAXS KW - lacuno-canalicular network KW - µCT KW - CLSM KW - konfokales Laser-Scanning-Mikroskop KW - Kleinwinkelröntgenstreuung KW - Knochen KW - Lakunen KW - lakuno-kanaliculäres Netzwerk KW - Mineralisierung KW - µCT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559593 ER - TY - THES A1 - Nayak, Abani Shankar T1 - Design, Characterization and On-sky Testing of an Integrated Optics Device for Stellar Interferometry: from Pupil Remappers to Discrete Beam Combiner T1 - Entwicklung, Charakterisierung und Erprobung einer integrierten, optischen Vorrichtung für die stellare Interferometrie: von Pupil Remappers zum diskreten Strahlkombinierer N2 - Stellar interferometry is the only method in observational astronomy for obtaining the highest resolution images of astronomical targets. This method is based on combining light from two or more separate telescopes to obtain the complex visibility that contains information about the brightness distribution of an astronomical source. The applications of stellar interferometry have made significant contributions in the exciting research areas of astronomy and astrophysics, including the precise measurement of stellar diameters, imaging of stellar surfaces, observations of circumstellar disks around young stellar objects, predictions of Einstein's General relativity at the galactic center, and the direct search for exoplanets to name a few. One important related technique is aperture masking interferometry, pioneered in the 1960s, which uses a mask with holes at the re-imaged pupil of the telescope, where the light from the holes is combined using the principle of stellar interferometry. While this can increase the resolution, it comes with a disadvantage. Due to the finite size of the holes, the majority of the starlight (typically > 80 %) is lost at the mask, thus limiting the signal-to-noise ratio (SNR) of the output images. This restriction of aperture masking only to the bright targets can be avoided using pupil remapping interferometry - a technique combining aperture masking interferometry and advances in photonic technologies using single-mode fibers. Due to the inherent spatial filtering properties, the single-mode fibers can be placed at the focal plane of the re-imaged pupil, allowing the utilization of the whole pupil of the telescope to produce a high-dynamic range along with high-resolution images. Thus, pupil remapping interferometry is one of the most promising application areas in the emerging field of astrophotonics. At the heart of an interferometric facility, a beam combiner exists whose primary function is to combine light to obtain high-contrast fringes. A beam combiner can be as simple as a beam splitter or an anamorphic lens to combine light from 2 apertures (or telescopes) or as complex as a cascade of beam splitters and lenses to combine light for > 2 apertures. However, with the field of astrophotonics, interferometric facilities across the globe are increasingly employing some form of photonics technologies by using single-mode fibers or integrated optics (IO) chips as an efficient way to combine light from several apertures. The state-of-the-art instrument - GRAVITY at the very large telescope interferometer (VLTI) facility uses an IO-based beam combiner device reaching visibilities accuracy of better than < 0.25 %, which is roughly 50× as precise as a few decades back. Therefore, in the context of IO-based components for applications in stellar interferometry, this Thesis describes the work towards the development of a 3-dimensional (3-D) IO device - a monolithic astrophotonics component containing both the pupil remappers and a discrete beam combiner (DBC). In this work, the pupil remappers are 3-D single-mode waveguides in a glass substrate collecting light from the re-imaged pupil of the telescope and feeding the light to a DBC, where the combination takes place. The DBC is a lattice of 3-D single-mode waveguides, which interact through evanescent coupling. By observing the output power of single-mode waveguides of the DBC, the visibilities are retrieved by using a calibrated transfer matrix ({U}) of the device. The feasibility of the DBC in retrieving the visibilities theoretically and experimentally had already been studied in the literature but was only limited to laboratory tests with monochromatic light sources. Thus, a part of this work extends these studies by investigating the response of a 4-input DBC to a broad-band light source. Hence, the objectives of this Thesis are the following: 1) Design an IO device for broad-band light operation such that accurate and precise visibilities could be retrieved experimentally at astronomical H-band (1.5-1.65 μm), and 2) Validation of the DBC as a possible beam combination scheme for future interferometric facilities through on-sky testing at the William Herschel Telescope (WHT). This work consisted of designing three different 3-D IO devices. One of the popular methods for fabricating 3-D photonic components in a glass substrate is ultra-fast laser inscription (ULI). Thus, manufacturing of the designed devices was outsourced to Politecnico di Milano as part of an iterative fabrication process using their state-of-the-art ULI facility. The devices were then characterized using a 2-beam Michelson interferometric setup obtaining both the monochromatic and polychromatic visibilities. The retrieved visibilities for all devices were in good agreement as predicted by the simulation results of a DBC, which confirms both the repeatability of the ULI process and the stability of the Michelson setup, thus fulfilling the first objective. The best-performing device was then selected for the pupil-remapping of the WHT using a different optical setup consisting of a deformable mirror and a microlens array. The device successfully collected stellar photons from Vega and Altair. The visibilities were retrieved using a previously calibrated {U} but showed significant deviations from the expected results. Based on the analysis of comparable simulations, it was found that such deviations were primarily caused by the limited SNR of the stellar observations, thus constituting a first step towards the fulfillment of the second objective. N2 - Das Auflösungsvermögen eines Teleskops, also die Fähigkeit, zwei Punktquellen voneinander zu trennen, wird durch ~λ/A bestimmt, wobei λ die Wellenlänge des Lichts und A der Durchmesser des Hauptspiegels des Teleskops ist. Wenn bei einem gegebenen Teleskop zwei punktförmige Objekte durch <λ/A getrennt sind, kann kein eindeutiges Bild dieser Objekte erzeugt werden und das Teleskopsystem ist somit beugungsbegrenzt. Kombiniert man jedoch das Licht von zwei Teleskopen, die durch einen Abstand B voneinander getrennt sind, erhöht sich die Auflösung um einen Faktor ~2B/A und überwindet damit die Beugungsgrenze eines einzelnen Teleskops. Daher wird bei der stellaren Interferometrie - deren Konzept von Michelson in den 1920er Jahren entwickelte wurde - Licht von zwei oder mehr Teleskopen kombiniert, um hochauflösende Bilder von astronomischen Objekten zu erzeugen. Die Anwendung der stellaren Interferometrie hat wichtige Beiträge zur Astronomie und Astrophysik geleistet, von der Untersuchung grundlegender Eigenschaften von Sternen bis hin zur Abbildung extragalaktischer Objekte. Das Herzstück einer interferometrischen Anlage ist ein Strahlkombinierer, der das Licht von mehreren Teleskopen (oder Aperturen) kombiniert, um kontrastreiche Interferenzstreifen zu erhalten. In der Anfangszeit konnte ein Strahlkombinierer ganz einfach sein, wie z.B. ein Strahlteiler oder eine anamorphotische Linse für die Kombination des Lichts von 2 Aperturen (oder Teleskopen), oder sehr komplex, wie z.B. eine Kaskade von Strahlteilern und Linsen, um Licht für >2 Aperturen zu kombinieren. Mit dem aufkommenden Gebiet der Astrophotonik setzen interferometrische Einrichtungen jedoch vermehrt photonische Technologien ein, indem Einzelmoden-Fasern oder ein Chip mit integrierter Optik (IO) verwendet werden, um Licht aus mehreren Aperturen effizient zu kombinieren. Bei der sogenannten pupil remapping interferometry Technik (dt etwa: neugeordnete Pupille) wird beispielsweise Licht mit mehreren Einzelmoden-Wellenleitern auf einem IO-Chip gesammelt. Diese Komponenten werden an der Position im Strahlengang eingefügt, an der die Pupille des Teleskops abgebildet wird. Anschließend wird das Licht aus den Fasern oder Wellenleitern durch eine Freistrahloptik oder IO-basierte Komponente interferometrisch überlagert, um Bilder sowohl mit hohem Kontrast als auch hoher Auflösung zu erzeugen. Im Kontext von IO-basierten Komponenten für stellare Interferometrie ist das Ziel dieser Arbeit die Entwicklung eines 3-dimensionalen (3-D) IO-Bauteils - eine monolithische Astrophotonik-Komponente, die sowohl die Pupil Remapper als auch einen discrete beam combiner (DBC) (dt: Diskreten Strahlkombinierer ) enthält. In dieser Arbeit sind die Pupil Remapper 3-D Einzelmoden-Wellenleiter, die in ein Glassubstrat eingeschrieben sind und das Licht von der abgebildeten Pupille des Teleskops sammeln und zu einem DBC leiten, in dem die Kombination stattfindet. Der DBC ist eine 3-D Gitteranordnung von Einzelmoden-Wellenleitern, die durch evaneszente Kopplung miteinander wechselwirken. Durch Beobachtung der Ausgangsleistung der Einzelmoden-Wellenleiter des DBCs werden mit Hilfe einer kalibrierten Übertragungsmatrix des Systems die Visibilities (dt: Kontrastwerte) ermittelt, die für eine hochauflösende Bildgebung erforderlich sind. Die Eignung von DBCs für die Ermittlung der Kontrastwerte wurde sowohl theoretisch als auch experimentell untersucht und in Fachzeitschriften publiziert. Bisher beschränkten sich diese Untersuchungen jedoch auf Labortests mit monochromatischen Lichtquellen. Die Ziele dieser Arbeit sind daher die folgenden: 1) Die Entwicklung eines IO-Bauteils für die Anwendung mit breitbandigem Licht, so dass Kontrastwerte im astronomischen H-Band (1,5-1,65 μm) ermittelt werden können, 2) experimentelle Demonstration genauer und präziser Kontrastwerte mit dem IO-Bauteil, welches mit der Femtosekundenlaser-Bearbeitungsmethode hergestellt wird, und 3) Validierung des DBCs als mögliches Konzept für die Strahlkombination für zukünftige interferometrische Anlagen durch On-Sky-Tests am William Herschel Teleskop. KW - stellar interferometry KW - ultra-fast laser inscription technology KW - astrophotonics KW - discrete beam cominer KW - pupil remappers KW - visibility KW - integrated optics KW - William Herschel telescope KW - on-sky tests KW - stellare Interferometrie KW - Femtosekundenlaser-Bearbeitungsmethode KW - Astrophotonik KW - diskreter Strahlkombinierer KW - Pupil Remapper KW - Kontrastwerte KW - integrierte Optik KW - William Herschel Teleskop KW - On-Sky-Tests Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-558743 ER - TY - GEN A1 - Sarabadani, Jalal A1 - Metzler, Ralf A1 - Ala-Nissila, Tapio T1 - Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = −1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = −1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1292 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574387 SN - 1866-8372 IS - 1292 SP - 033003-1 EP - 033003-14 ER - TY - GEN A1 - Smirnov, Lev A. A1 - Bolotov, Maxim A1 - Bolotov, Dmitri A1 - Osipov, Grigory V. A1 - Pikovsky, Arkady T1 - Finite-density-induced motility and turbulence of chimera solitons T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We consider a one-dimensional oscillatory medium with a coupling through a diffusive linear field. In the limit of fast diffusion this setup reduces to the classical Kuramoto–Battogtokh model. We demonstrate that for a finite diffusion stable chimera solitons, namely localized synchronous domain in an infinite asynchronous environment, are possible. The solitons are stable also for finite density of oscillators, but in this case they sway with a nearly constant speed. This finite-density-induced motility disappears in the continuum limit, as the velocity of the solitons is inverse proportional to the density. A long-wave instability of the homogeneous asynchronous state causes soliton turbulence, which appears as a sequence of soliton mergings and creations. As the instability of the asynchronous state becomes stronger, this turbulence develops into a spatio-temporal intermittency. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1291 KW - chimera KW - soliton KW - finite-size effects Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574281 SN - 1866-8372 IS - 1291 ER -