TY - GEN A1 - Dosche, Carsten A1 - Mickler, Wulfhard A1 - Löhmannsröben, Hans-Gerd A1 - Agenet, Nicolas A1 - Vollhardt, K. Peter C. T1 - Photoinduced electron transfer in [N]phenylenes N2 - First studies of electron transfer in [N]phenylenes were performed in bimolecular quenching reactions of angular [3]- and triangular [4]phenylene with various electron acceptors. The relation between the quenching rate constants kq and the free energy change of the electron transfer (ΔG0CS ) could be described by the Rehm-Weller equation. From the experimental results, a reorganization energy λ of 0.7 eV was derived. Intramolecular electron transfer reactions were studied in an [N]phenylene bichomophore and a corresponding reference compound. Fluorescence lifetime and quantum yield of the bichromophor display a characteristic dependence on the solvent polarity, whereas the corresponding values of the reference compound remain constant. From the results, a nearly isoenergonic ΔG0CS can be determined. As the triplet quantum yield is nearly independent of the polarity, charge recombination leads to the population of the triplet state. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 23 KW - [N]phenylenes KW - photoinduced electron transfer KW - [N]phenylene dyads Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12463 ER - TY - THES A1 - Latnikova, Alexandra T1 - Polymeric capsules for self-healing anticorrosion coatings T1 - Polymerische Kapseln für selbstheilende Korrosionsschutzbeschichtungen N2 - The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of “good” and “poor” solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a “poor” solvent for the chosen polymer while compact morphologies are formed when the solvent is “good”. Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the “good” solvents would be located inside the sphere, while the “poor” ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the “in-situ” encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting “smart” self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests. N2 - In Anlehnung an den Selbstheilungsmechanismus der menschlichen Haut entwickeln wir ein innovatives Verfahren zur Funktionalisierung von Korrosionsschutzbeschichtungen, um auch diese in die Lage zu versetzen Beschädigungen selbstständig „auszuheilen“. Dazu werden winzige Mikro- und Nanobehälter mit aktiven Substanzen (z. B. Korrosionshemmstoffen, Versiegelungsmitteln, Bioziden etc.) befüllt und anschließend in eine Korrosionsschutzbeschichtung eingebettet. Kommt es nun im Zeitablauf zu korrosionsauslösenden Beschädigungen der Schutzbeschichtung (z. B. durch Kratzer oder Risse) werden an der Defektstelle die eingebetteten Behälter zerstört und aktiv wirkende Gegensubstanzen freigesetzt. Dadurch wird die verletzte Stelle sofort wieder verschlossen und die Korrosionsgefahr eliminiert. Der entscheidende Vorteil derart funktionalisierter Schutzbeschichtungen ist ihre aktive Rückkopplung mit dem Korrosionsauslöser: Die aktive Schutzsubstanz wird nur an der Defektstelle und nur in der zur Korrosionsvermeidung erforderlichen Menge freigegeben. Somit werden eine länger anhaltende Wirkdauer sowie eine deutlich höhere Nachhaltigkeit der Beschichtungen ermöglicht. Dieses „intelligente Verhalten“ der neuen aktiven Korrosionsschutzbeschichtungen ist nur dank ihrer innovativen Mikrostruktur möglich. Die winzigen Mikro- und Nanobehälter beinhalten nicht nur aktive Substanzen in ihrem Inneren sondern besitzen auch eine intelligent konstruierte Hüllenstruktur, deren Durchlässigkeit sich je nach Art des Korrosionsauslösers ändert. Wird die eingekapselte aktive Substanz freigesetzt, fängt diese sofort an gegen die korrosionsverursachenden Einflüsse zu wirken. Ist die Gefahr beseitigt verringert sich die Durchlässigkeit der Behälterhülle wieder. Diese bedingte Reversibilität zwischen geschlossenem und geöffnetem Zustand des Behälters sorgt für einen sehr sparsamen Verbrauch der aktiven Substanz und für die stark verbesserte Schutzwirkung darauf basierender Antikorrosionsbeschichtungen. Diese Arbeit befasst sich mit dem Aufbau polymerer Kern-Schale-Mikrokapseln, die entsprechende Korrosionsinhibitoren und Biocide enthalten. Der Morphologie wird für zahlreiche Lösungsmittel und Polymere mit Hilfe der Hansen-Löslichkeitsparameter in guter Übereinstimmung mit elektronenmikroskopischen Experimenten beschrieben. Die Wirkungsweise in technischen Beschichtungen wird quantifiziert anhand von elektrochemischer Impedanzspektroskopie, Rastervibrationssondenmessungen und industrienahen Testverfahren. KW - Korrosion KW - Selbstheilende Beschichtungen KW - Einkapselung KW - Morphologie von Kapseln KW - corrosion KW - self-healing coatings KW - encapsulation KW - capsule morphology Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60432 ER - TY - GEN A1 - Laschewsky, André A1 - Ringsdorf, H. T1 - Polymerization of amphiphilic dienes in Langmuir-Blodgett multilayers N2 - Amphiphilic derivatives of octadiene and docosadiene were investigated in monolayers and Langmuir-Blodgett multilayers, with respect to their self-organization and their polymerization behavior. All amphiphiles investigated form monolayers. However, only acid and alcohol derivatives were able to build up multilayers. Those multilayers are rapidly photopolymerized in the layers via a two-step process: Irradiation with long-wavelength UV light yields soluble polymers, whereas additional irradiation with sfiort-wavelength UV light produces insoluble and presumably cross-linked polymers. The reaction meclianism is discussed according to the polymer characterization by UV spectroscopy, small-angle X-ray scattering, NMR spectroscopy, and gel permeation chromatography. All multilayers undergo structural changes during the polymerization; substantial changes result in defects in the polymerized layers as observed by scanning electron microscopy. In contrast to the acids and alcohols, the deposition of monolayers of the aldehyde derivatives did not yield well-ordered multilayers, but rather amorphous films. In this different film structure, the photopolymerization process differs from the one observed in multilayers. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 058 Y1 - 1988 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17176 ER - TY - THES A1 - Schneider, Helen T1 - Reactive eutectic media based on ammonium formate for the valorization of bio-sourced materials T1 - Reaktive eutektische Medien auf Basis von Ammoniumformiat zur Aufwertung von biobasierten Substanzen N2 - In the last several decades eutectic mixtures of different compositions were successfully used as solvents for vast amount of chemical processes, and only relatively recently they were discovered to be widely spread in nature. As such they are discussed as a third liquid media of the living cell, that is composed of common cell metabolites. Such media may also incorporate water as a eutectic component in order to regulate properties such as enzyme activity or viscosity. Taking inspiration form such sophisticated use of eutectic mixtures, this thesis will explore the use of reactive eutectic media (REM) for organic synthesis. Such unconventional media are characterized by the reactivity of their components, which means that mixture may assume the role of the solvent as well as the reactant itself. The thesis focuses on novel REM based on ammonium formate and investigates their potential for the valorization of bio-sourced materials. The use of REM allows the performance of a number of solvent-free reactions, which entails the benefits of a superior atom and energy economy, higher yields and faster rates compared to reactions in solution. This is evident for the Maillard reaction between ammonium formate and various monosaccharides for the synthesis of substituted pyrazines as well as for a Leuckart type reaction between ammonium formate and levulinic acid for the synthesis of 5-methyl-2-pyrrolidone. Furthermore, reaction of ammonium formate with citric acid for the synthesis of yet undiscovered fluorophores, shows that synthesis in REM can open up unexpected reaction pathways. Another focus of the thesis is the study of water as a third component in the REM. As a result, the concept of two different dilution regimes (tertiary REM and in REM in solvent) appears useful for understanding the influence of water. It is shown that small amounts of water can be of great benefit for the reaction, by reducing viscosity and at the same time increasing reaction yields. REM based on ammonium formate and organic acids are employed for lignocellulosic biomass treatment. The thesis thereby introduces an alternative approach towards lignocellulosic biomass fractionation that promises a considerable process intensification by the simultaneous generation of cellulose and lignin as well as the production of value-added chemicals from REM components. The thesis investigates the generated cellulose and the pathway to nanocellulose generation and also includes the structural analysis of extracted lignin. Finally, the thesis investigates the potential of microwave heating to run chemical reactions in REM and describes the synergy between these two approaches. Microwave heating for chemical reactions and the use of eutectic mixtures as alternative reaction media are two research fields that are often described in the scope of green chemistry. The thesis will therefore also contain a closer inspection of this terminology and its greater goal of sustainability. N2 - Ein eutektisches System beschreibt eine homogene Mischung verschiedener Substanzen, welche bei einer einzigen Temperatur schmilzt und dabei einen Schmelzpunkt aufweist der unterhalb der Schmelzpunkte der einzelnen Komponenten liegt. Solche Gemische können aus simplen organischen Substanzen gebildet werden und haben deshalb in den letzten Jahrzehnten große Aufmerksamkeit als neuartige Lösungsmittel erhalten. Mittlerweile wird ihr Nutzung für eine Vielzahl chemischer Prozesse erforscht. Zudem wurde Entdeckt das solche Gemische auch in der Natur Verbreitung finden. In diesem Zuge werden sie z.B. als drittes flüssiges Medium der lebenden Zelle diskutiert, welches durch eutektische Gemische von gewöhnlichen Zellmetaboliten gebildet wird. Sie können dabei auch Wasser als eutektische Komponente enthalten, um Eigenschaften wie Enzymaktivität oder Viskosität zu regulieren. Inspiriert durch diesen raffinierten Einsatz eutektischer Gemische untersucht diese Arbeit die Verwendung reaktiver eutektischer Medien (REM) für die chemische Anwendung. Solche unkonventionellen Medien zeichnen sich durch die Reaktivität ihrer Komponenten aus, was bedeutet, dass das Gemisch sowohl die Rolle des Lösungsmittels als auch des Reaktanten selbst übernehmen kann. Die Arbeit konzentriert sich auf neuartige REM auf Basis von Ammoniumformiat und untersucht deren Potenzial für die Nutzung von bio-basierten Substanzen. Die Verwendung von REM ermöglicht die Durchführung einer Reihe lösungsmittelfreier Reaktionen, was im Vergleich zu Reaktionen in Lösung die Vorteile einer besseren Atomökonomie, höhere Ausbeuten und schnellere Reaktionsgeschwindigkeiten mit sich bringt. Dies zeigt sich an der Maillard-Reaktion zwischen Ammoniumformiat und verschiedenen Monosacchariden zur Synthese substituierter Pyrazine sowie an der Leuckart-Reaktion zwischen Ammoniumformiat und Lävulinsäure zur Synthese von 5-Methyl-2-pyrrolidon. Darüber hinaus zeigt die Reaktion von Ammoniumformiat mit Zitronensäure zur Synthese noch unentdeckter Fluorophore, dass die Synthese in REM bisher unerschlossene Reaktionswege eröffnen kann. Ein weiterer Schwerpunkt der Arbeit ist die Untersuchung von Wasser als dritte Komponente im REM. Daher erscheint das Konzept zweier unterschiedlicher Verdünnungsregime (tertiäres REM und REM im Lösungsmittel) nützlich für das Verständnis des Einflusses von Wasser. Es zeigt sich, dass kleine Mengen Wasser von großem Nutzen für die Reaktion sein können, indem sie die Viskosität senken und gleichzeitig die Reaktionsausbeuten erhöhen. Für den Aufschluss von Lignocellulose werden REM auf Basis von Ammoniumformiat und organischen Säuren eingesetzt. Die Arbeit stellt damit einen neuen Ansatz für das Konzept der Bioraffinerie vor, der eine erhebliche Prozessintensivierung durch die gleichzeitige Erzeugung von Cellulose, Lignin sowie die Herstellung von Chemikalien aus REM-Komponenten verspricht. Die Arbeit untersucht die erzeugte Cellulose, sowie die Bedingungen zur Erzeugung von Nanocellulose und umfasst die Strukturanalyse von extrahiertem Lignin. Abschließend untersucht die Arbeit das Potenzial der Mikrowellenenergie zum Erhitzen chemischer Reaktionen in REM und beschreibt die Synergie zwischen diesen beiden Ansätzen. Mikrowellentechnologie für chemische Reaktionen und die Verwendung eutektischer Gemische als alternative Reaktionsmedien sind zwei Forschungsfelder, die häufig im Rahmen der Grünen Chemie beschrieben werden. Die Arbeit beinhaltet daher auch eine genauere Betrachtung dieser Terminologie und ihres übergeordneten Ziels der Nachhaltigkeit. KW - solvent-free reactions KW - deep eutectic solvents KW - microwave synthesis KW - green chemistry KW - biorefinery KW - deoxyfructosazine KW - citrazinic acid KW - Bioraffinerie KW - Citrazinsäure KW - stark eutektisches Lösungsmittel KW - Deoxyfructosazin KW - Grüne Chemie KW - Mikrowellensynthese KW - lösungsmittelfreie Synthese Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613024 ER - TY - THES A1 - Michalik-Onichimowska, Aleksandra T1 - Real-time monitoring of (photo)chemical reactions in micro flow reactors and levitated droplets by IR-MALDI ion mobility and mass spectrometry N2 - Eine nachhaltigere chemische Industrie erfordert eine Minimierung der Lösungsmittel und Chemikalien. Daher werden Optimierung und Entwicklung chemischer Prozesse vor einer Produktion in großem Maßstab in kleinen Chargen durchgeführt. Der entscheidende Schritt bei diesem Ansatz ist die Skalierbarkeit von kleinen Reaktionssystemen auf große, kosteneffiziente Reaktoren. Die Vergrößerung des Volumens des Reaktionsmediums geht immer mit der Vergrößerung der Oberfläche einher, die mit dem begrenzenden Gefäß in Kontakt steht. Da das Volumen kubisch, während die Oberfläche quadratisch mit zunehmendem Radius skaliert, nimmt ihr Verhältnis nicht linear zu. Viele an der Grenzfläche zwischen Oberfläche und Flüssigkeit auftretende Phänomene können die Reaktionsgeschwindigkeiten und Ausbeuten beeinflussen, was zu falschen Prognosen aufgrund der kleinskaligen Optimierung führt. Die Anwendung von schwebenden Tropfen als behälterlose Reaktionsgefäße bietet eine vielversprechende Möglichkeit, die oben genannten Probleme zu vermeiden. In der vorgestellten Arbeit wurde eine effiziente Kopplung von akustisch schwebenden Tropfen und IM Spektrometer für die Echtzeitüberwachung chemischer Reaktionen entwickelt, bei denen akustisch schwebende Tropfen als Reaktionsgefäße fungieren. Das Design des Systems umfasst die berührungslose Probenahme und Ionisierung, die durch Laserdesorption und -ionisation bei 2,94 µm realisiert wird. Der Umfang der Arbeit umfasst grundlegende Studien zum Verständnis der Laserbestrahlung von Tropfen im akustischen Feld. Das Verständnis dieses Phänomens ist entscheidend, um den Effekt der zeitlichen und räumlichen Auflösung der erzeugten Ionenwolke zu verstehen, die die Auflösung des Systems beeinflusst. Der Aufbau umfasst eine akustische Falle, Laserbestrahlung und elektrostatische Linsen, die bei hoher Spannung unter Umgebungsdruck arbeiten. Ein effektiver Ionentransfer im Grenzflächenbereich zwischen dem schwebenden Tropfen und dem IMS muss daher elektrostatische und akustische Felder vollständig berücksichtigen. Für die Probenahme und Ionisation wurden zwei unterschiedliche Laserpulslängen untersucht, nämlich im ns- und µs-Bereich. Die Bestrahlung über µs-Laserpulse bietet gegenüber ns-Pulse mehrere Vorteile: i) das Tropfenvolumen wird nicht stark beeinflusst, was es ermöglichet, nur ein kleines Volumen des Tropfens abzutasten; ii) die geringere Fluenz führt zu weniger ausgeprägten Schwingungen des im akustischen Feld eingeschlossenen Tropfens und der Tropfen wird nicht aus dem akustischen Feld rückgeschlagen, was zum Verlust der Probe führen würde; iii) die milde Laserbestrahlung führt zu einer besseren räumlichen und zeitlichen Begrenzung der Ionenwolken, was zu einer besseren Auflösung der detektierten Ionenpakete führt. Schließlich ermöglicht dieses Wissen die Anwendung der Ionenoptik, die erforderlich ist, um den Ionenfluss zwischen dem im akustischen Feld suspendierten Tropfen und dem IM Spektrometer zu induzieren. Die Ionenoptik aus 2 elektrostatischen Linsen in der Nähe des Tropfens ermöglicht es, die Ionenwolke effektiv zu fokussieren und direkt zum IM Spektrometer-Eingang zu führen. Diese neuartige Kopplung hat sich beim Nachweis einiger basischer Moleküle als erfolgreich erwiesen. Um die Anwendbarkeit des Systems zu belegen, wurde die Reaktion zwischen N-Boc Cysteine Methylester und Allylalkohol in einem Chargenreaktor durchgeführt und online überwacht. Für eine Kalibrierung wurde der Reaktionsfortschritt parallel mittels 1H-NMR verfolgt. Der beobachtete Reaktionsumsatz von mehr als 50% innerhalb der ersten 20 Minuten demonstrierte die Eignung der Reaktion, um die Einsatzpotentiale des entwickelten Systems zu bewerten. N2 - One aspect of achieving a more sustainable chemical industry is the minimization of the usage of solvents and chemicals. Thus, optimization and development of chemical processes for large-scale production is favourably performed in small batches. The critical step in this approach is upscaling the batches from the small reaction systems to the large reactors mandatory for cost efficient production in an industrial environment. Scaling up the bulk volume always goes along with increasing the surface where the reaction medium is in contact with the confining vessel. Since volume scales proportional with the cubic dimension while the surface scales quadratic, their ratio is size-dependent. The influence of reaction vessel walls can change the reaction performance. A number of phenomena occurring at the surface-liquid interface can affect reaction rates and yields, resulting in possible difficulties in predicting and extrapolating from small size production scale to large industrial processes. The application of levitated droplets as a containerless reaction vessels provides a promising possibility to avoid the above-mentioned issues. In the presented work, an efficient coupling of acoustically levitated droplets to an ion mobility (IM) spectrometer, operating at ambient conditions, was designed for real-time monitoring of chemical reactions. The design of the system comprises noncontact sampling and ionization of the droplet realised by laser desorption/ionization at 2,94 µm. The scope of the work includes fundamental studies covering understanding of laser irradiation of droplets enclosed in an acoustical field. Understanding of this phenomenon is crucial to comprehending the effects of temporal and spatial resolution of the generated ion plume that influence the resolution of the system. The set-up includes an acoustic trap, laser irradiation and ion manipulation electrostatic lenses operating at high voltage at ambient pressure. The complexity of the design needs to fully be considered for an effective ion transfer at the interface region between the levitated droplet and IM spectrometer. For sampling and ionization, two distinct laser pulse lengths were evaluated, ns and µs. Irradiation via µs laser pulses provides several advantages: i) the droplet volume is not extensively impinged, as in case of ns laser pulses, allowing the sampling of only the small volume of the droplet; ii) the lower fluence results in less pronounced oscillations of the droplet confined in the acoustic field. The droplet will not be dissipated out of the acoustic field leading to loss of the sample; iii) the mild laser irradiation results in better spatial and temporal ion plume confinement, leading to better resolution of the detected ion packets. Finally, this knowledge allows the application of ion optics necessary to induce ion flow between the droplet suspended in the acoustic field and the IM spectrometer. The ion optics, composed of 2 electrostatic lenses placed in the near vicinity of the droplet, allow effective focusing of the ion plume and its redirection directly to the IM spectrometer entrance. This novel coupling has proved to be successful for detection of some simple molecules ionizable at the 2.94 µm wavelength. To further demonstrate the applicability of the system, a proof-of-principle reaction was selected, fulfilling the requirements of the system, and was subjected to comprehensive investigation of its performance. Herein, the reaction between N-Boc cysteine methyl ester and allyl alcohol has been performed in a batch reactor and on-line monitored via 1H NMR to establish reaction propagation. With the additional assessment, it was confirmed that the thiol-ene coupling can be performed within first 20 minutes of the irradiation with a reaction yield above 50%, proving that the reaction can be applied as a study case to assess the possibilities of the developed system. T2 - Echtzeit-Überwachung von (Photo)chemischen Reaktionen in Mikroströmungsreaktoren und schwebenden Tropfen durch IR-MALDI Ionenmoblität- und Massenspektrometrie KW - ion mobility spectrometry KW - mass spectrometry KW - acoustically levitated droplets KW - photochemical reactions KW - akustisch schwebende Tropfen KW - Ionenmobilitätspektrometrie KW - Massenspektrometrie KW - Photochemische Reaktionen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-557298 ER - TY - THES A1 - Friese, Viviane A. T1 - Solvato-, vapo, mechanochromic and luminescent behavior of Rhodium, Platinum and Gold complexes and their coordination polymers Y1 - 2016 ER - TY - GEN A1 - Kaafarani, Bilal R. A1 - Wex, Brigitte A1 - Strehmel, Bernd A1 - Neckers, Douglas C. T1 - Structural concept for fluorinated Y-enynes with solvatochromic properties N2 - An approach to the development of fluorescent probes to follow polymerizations in situ using fluorinated cross-conjugated enediynes (Y-enynes) is reported. Different substitution patterns in the Y-enynes result in distinct solvatochromic behavior. β,β-Bis(phenylethynyl)pentafluorostyrene 7, which bears no donor substituents and only fluorine at the styrene moiety, shows no solvatochromism. Donor substituted β,β-bis(3,4,5-trimethoxyphenylethynyl) pentafluorostyrene 8 and β,β-bis(4-butyl-2,3,5,6-tetrafluorophenylethynyl)-3,4,5-trimethoxystyrene 9 exhibit solvatochromism upon change of solvent polarity. Y-enyne 8 showed the largest solvatochromic shift (94 nm bathochromic shift) upon changing solvent from cyclohexane to acetonitrile. A smaller solvatochromic response (44 nm bathochromic shift) was observed for 9. Lippert–Mataga treatment of 8 and 9 yields slopes of -10,800 and -6,400 cm -1, respectively. This corresponds to a change in dipole moment of 9.6 and 6.9 D, respectively. The solvatochromic behavior in 8 and 9 supports the formation of an intramolecular charge transfer (ICT) state. The low fluorescence quantum yields are caused by competitive double bond rotation. The fluorescence decay time of 9 decreases in methyltetrahydrofuran from 2.1 ns at 77 K to 0.11 ns at 200 K. Efficient single bond rotation in 9 was frozen at -50 °C in a configuration in which the trimethoxyphenyl ring is perpendicular to the fluorinated rings. 7–9 are photostable compounds. The X-ray structure of 7 shows it is not planar and that its conjugation is distorted. Y-enyne 7 stacks in the solid state showing coulombic, actetylene–arene, and fluorine–π interactions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 027 Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13168 ER - TY - THES A1 - Andersen, Audrée T1 - Surfactant dynamics at interfaces : a series of second harmonic generation experiments T1 - Surfactant Dynamik an Grenzflächen : eine Studie über SHG-Experimente N2 - Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants. N2 - Amphiphile vereinen zwei gegensätzliche Strukturelemente in einem Molekül, eine hydrophile Kopfgruppe und ein hydrophobe, meist aliphatische Kette. Aufgrund der molekularen Asymmetrie erfolgt eine spontane Adsorption an der Wasser-Luft Grenzfläche. Die Adsorptionsschicht verändert die makroskopischen Eigenschaften des Materials, z.B. die Grenzflächenspannung wird erniedrigt. Amphiphile sind zentrale Bauelemente der Kolloid- und Grenzflächenforschung, die Phänomene, wie Schäume ermöglichen. Eine Schaumlamelle besteht aus einem dünnen Wasserfilm, der durch zwei Adsorptionsschichten stabilisiert wird. Die Stabilität der Lamelle wird durch die Grenzflächenrheologie entscheidend geprägt. Die wesentliche makroskopische Größe in diesem Zusammenhang ist das so genannte Grenzflächendilatationsmodul E. Es beschreibt die Fähigkeit des Systems die Gleichgewichtsgrenzflächenspannung nach einer Expansion oder Dilatation der Adsorptionschicht wieder herzustellen. Das Modul E ist eine komplexe Größe, in dem der Imaginärteil direkt mit der Schaumstabilität korreliert. Diese Arbeit widmet sich der Grenzflächenrheologie. In der Literatur werden zwei kontroverse Modelle zur Interpretation dieser Größe diskutiert. Diese Modelle werden experimentell in dieser Arbeit überprüft. Dies erfordert die Entwicklung neuer experimenteller Aufbauten basierend auf nichtlinearen, optischen Techniken. Mit diesen Experimenten konnte eines der Modelle bestätigt werden. KW - Tensid KW - Grenzflächenchemie KW - Nichtlineare Spektroskopie KW - Oscillating Bubble KW - surfactants KW - nonlinear optics KW - surface rheology KW - air-water interface KW - oscillating bubble Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6553 ER - TY - THES A1 - Chaleawlert-Umpon, Saowaluk T1 - Sustainable electrode materials based on lignin T1 - Ligninbasierte nachhaltige Elektrodenmaterialien N2 - The utilization of lignin as renewable electrode material for electrochemical energy storage is a sustainable approach for future batteries and supercapacitors. The composite electrode was fabricated from Kraft lignin and conductive carbon and the charge storage contribution was determined in terms of electrical double layer (EDL) and redox reactions. The important factors at play for achieving high faradaic charge storage capacity contribute to high surface area, accessibility of redox sites in lignin and their interaction with conductive additives. A thinner layer of lignin covering the high surface area of carbon facilitates the electron transfer process with a shorter pathway from the active sites of nonconductive lignin to the current collector leading to the improvement of faradaic charge storage capacity. Composite electrodes from lignin and carbon would be even more sustainable if the fluorinated binder can be omitted. A new route to fabricate a binder-free composite electrode from Kraft lignin and high surface area carbon has been proposed by crosslinking lignin with glyoxal. A high molecular weight of lignin is obtained to enhance both electroactivity and binder capability in composite electrodes. The order of the processing step of crosslinking lignin on the composite electrode plays a crucial role in achieving a stable electrode and high charge storage capacity. The crosslinked lignin based electrodes are promising since they allow for more stable, sustainable, halogen-free and environmentally benign devices for energy storage applications. Furthermore, improvement of the amount of redox active groups (quinone groups) in lignin is useful to enhance the capacity in lithium battery applications. Direct oxidative demethylation by cerium ammonium nitrate has been carried out under mild conditions. This proves that an increase of quinone groups is able to enhance the performance of lithium battery. Thus, lignin is a promising material and could be a good candidate for application in sustainable energy storage devices. N2 - Die Verwendung von Lignin als erneuerbares Ausgangsmaterial für Elektroden ist ein nachhaltiger Ansatz für die Herstellung der nächsten Generation von Batterien und Superkondensatoren. In dieser Arbeit werden Verbundelektroden auf der Basis von Kraft-Lignin und leitfähigem Kohlenstoff hergestellt und getestet. Die Beiträge des Aufbaus einer elektrischen Doppelschicht (EDL) und der Redoxreaktionen zur Kapazität der Elektrode werden diskutiert. Die wichtigsten Faktoren um eine hohe faradaysche Kapazität der aktiven Gruppen in Lignin zu erreichen sind eine große Oberfläche, die Zugänglichkeit der redoxaktiven Gruppen, sowie die Wechselwirkung mit leitfähigen Additiven. Dabei verringert eine dünnere Ligninschicht auf der Oberfläche des leitfähigen Kohlenstoffs den Elektronentransportweg zwischen den redoxaktiven Gruppen und dem Stromabnehmer und wirkt sich somit positiv auf die faradaysche Kapazität aus. Traditionelle Verbundelektroden enthalten in der Regel fluorierte Bindemittel, was deren Nachhaltigkeit in Frage stellt. Die Verwendung von Glyoxal als Quervernetzer für Lignin stellt eine Alternative zur Herstellung von bindemittelfreien ligninbasierten Verbundelektroden dar. Durch die Quervernetzung wird Lignin mit hohem Molekulargewicht erhalten, was sich insbesondere vorteilhaft auf die Stabilität der Elektroden auswirkt. Für das Erreichen einer hohen Kapazität spielt allerdings die Reihenfolge der Produktionsschritte eine entscheidende Rolle, was hier auch diskutiert wird. Eine Erhöhung der Anzahl an redoxativen Gruppen, insbesondere Chinon-Funktionalitäten, im Lignin führt darüber hinaus zur Erhöhung der Kapazität in primären Lithiumbatterien. Die direkte oxidative Demethylierung von Phenylethern mit Hilfe von Cerammoniumnitrat wurde in dieser Arbeit unter milden Reaktionsbedingungen durchgeführt und die verbesserte Kapazität in Lithiumbatterien aufgrund der erhöhten Anzahl an redoxaktiven Gruppen aufgezeigt. Abschließend kann Lignin, quervernetzt oder oxidiert, als vielversprechender Wegbereiter für nachhaltige Materialen in der Energiespeicherung angesehen werden. KW - lignin KW - energy storage KW - sustainable energy storage materials KW - Lignin KW - Energiespeicher KW - nachhaltige Energiespeichermaterialien Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-411793 ER - TY - THES A1 - Milke, Bettina T1 - Synthese von Metallnitrid- und Metalloxinitridnanopartikeln für energierelevante Anwendungen T1 - Synthesis of metal nitride and metal oxynitride nanoparticles for energy related applications N2 - Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie führt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter für Nanomaterialien. Allerdings führen bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kostengünstige und sichere Synthese würde die Möglichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Flüssigphasensynthese eingesetzt. Beide Synthesewege führen zu definierten Partikelgrößen und interessanten Morphologien und ermöglichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route führt diese zu Nanopartikeln mit Kern-Hülle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberflächen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazitäten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) übersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gewünschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und führt so zu gelben Zr2ON2-Nanopartikeln mit einer Größe d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln führt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel lässt neue Morphologien in Form von Nanostäbchen entstehen, die zu schuppenartigen sphärischen Überstrukturen agglomeriert sind. N2 - The development of new methods toward alternative clean energy production and efficient energy storage is a hot topic nowadays. In this context nanoscience has an important role to find suitable ways of increasing the efficiency of storage and production of energy of already known materials and new materials. However, until now the most well-known syntheses of MnN0,43 and Zr2ON2 nanoparticles lead to undefined particles. A simple, cheap and safe synthesis would offer the possibility of broader applications and scalability. We herein present the so-called urea-glass route which is used as a sol-gel process. This synthetic route leads to well-defined particle sizes, novel particle morphologies and allows the tailoring of the desired products. In the case of the synthesis of manganese nitride nanoparticles (MnN0,43), nanoparticles with a core-shell structure are obtained, their use as conversion materials in batteries is first introduced. On the other hand, the formation of zirconium oxynitride nanoparticles (Zr2ON2) can be easily influenced by varying the reaction conditions such as the amount of urea or the reaction temperature. The addition of small amounts of salt prevents the formation of carbon in the final product, leading to yellow Zr2ON2 nanoparticles with a size of d = 8 nm which show semiconductor behavior. KW - Nitride KW - Oxinitride KW - Nano KW - Li-Batterien KW - Harnstoff-Glas-Route KW - Nitrides KW - Oxynitrides KW - Nano KW - Li-batteries KW - Urea-Glas-Route Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60008 ER -