TY - THES A1 - Kempa, Stefan T1 - Analysen zur Stressantwort von Arabidopsis thaliana unter Schwefelmangelbedingungen : Studien zur Funktion der Dehydroascorbatreduktase in vivo Y1 - 2004 CY - Potsdam ER - TY - THES A1 - Löffler, Frank T1 - Numerical simulations of neutron star - black hole mergers T1 - Computersimulationen von Zusammenstößen eines schwarzen Lochs und eines Neutronensterns N2 - Collisions of black holes and neutron stars, named mixed binaries in the following, are interesting because of at least two reasons. Firstly, it is expected that they emit a large amount of energy as gravitational waves, which could be measured by new detectors. The form of those waves is expected to carry information about the internal structure of such systems. Secondly, collisions of such objects are the prime suspects of short gamma ray bursts. The exact mechanism for the energy emission is unknown so far. In the past, Newtonian theory of gravitation and modifications to it were often used for numerical simulations of collisions of mixed binary systems. However, near to such objects, the gravitational forces are so strong, that the use of General Relativity is necessary for accurate predictions. There are a lot of problems in general relativistic simulations. However, systems of two neutron stars and systems of two black holes have been studies extensively in the past and a lot of those problems have been solved. One of the remaining problems so far has been the use of hydrodynamic on excision boundaries. Inside excision regions, no evolution is carried out. Such regions are often used inside black holes to circumvent instabilities of the numerical methods near the singularity. Methods to handle hydrodynamics at such boundaries have been described and tests are shown in this work. One important test and the first application of those methods has been the simulation of a collapsing neutron star to a black hole. The success of these simulations and in particular the performance of the excision methods was an important step towards simulations of mixed binaries. Initial data are necessary for every numerical simulation. However, the creation of such initial data for general relativistic situations is in general very complicated. In this work it is shown how to obtain initial data for mixed binary systems using an already existing method for initial data of two black holes. These initial data have been used for evolutions of such systems and problems encountered are discussed in this work. One of the problems are instabilities due to different methods, which could be solved by dissipation of appropriate strength. Another problem is the expected drift of the black hole towards the neutron star. It is shown, that this can be solved by using special gauge conditions, which prevent the black hole from moving on the computational grid. The methods and simulations shown in this work are only the starting step for a much more detailed study of mixed binary system. Better methods, models and simulations with higher resolution and even better gauge conditions will be focus of future work. It is expected that such detailed studies can give information about the emitted gravitational waves, which is important in view of the newly built gravitational wave detectors. In addition, these simulations could give insight into the processes responsible for short gamma ray bursts. N2 - Zusammenstöße eines schwarzen Lochs und eines Neutronensterns, im Folgenden "gemischte Zusammenstöße" genannt, sind aus wenigstens zwei Gründen interessant. Erstens wird erwartet, dass dabei große Mengen Energie als Gravitationswellen freigesetzt werden und diese mit neuen Detektoren gemessen werden können. Die Form dieser Wellen verrät viel über die Beschaffenheit eines solchen Systems und stellt neben elektromagnetischen Wellen eine wichtige Informationsquelle dar. Zweitens sind Zusammenstöße von kompakten Objekten wie Neutronensternen und schwarze Löchern sehr wahrscheinlich die Ursache sogenannter kurzer Gammastrahlungsblitze. Deren genauer Mechanismus für die Umwandlung der gewaltigen Energiemengen, die bei diesen Blitzen ausgesandt werden, ist jedoch bisher unbekannt. Computersimulationen von Zusammenstößen eines gemischten Systems wurden bisher oft unter Benutzung der Newtonschen Gravitationstheorie, bzw. Korrekturen dazu, durchgeführt. In der Nähe so kompakte Objekte wie schwarzer Löcher oder Neutronensterne ist jedoch die Gravitationswirkung so stark, dass Näherungen wie die erwähnten Korrekturen der Newtonschen Gravitationstheorie zu ungenau sind. Eine Benutzung der allgemeinen Relativitätstheorie ist daher für dieses Problem unumgänglich. Die Probleme allgemein-relativistischer Simulationen sind vielfältig. Jedoch wurden Binärsysteme zweier schwarzer Löcher und zweier Neutronensterne schon eingehend untersucht, und so viele Probleme, die auch Simulationen gemischter Systeme betreffen, gelöst. Eins der bisher ausstehenden Probleme war die Behandlung der Hydrodynamik an Ausschneiderändern; Rändern zu Gebieten, die in der Zeitentwicklung der Simulation ignoriert werden. Solche Ränder werden zum Beispiel innerhalb eines schwarzen Lochs benutzt, um Instabilitäten des Programms in der Nähe der Singularität zu vermeiden. Methoden, solche Ränder zu behandeln wurden in der Arbeit entwickelt, getestet und gezeigt, dass sie verlässlich arbeiten. Ein wichtiger Test für diese Methoden, der gleichzeitig der Gewinnung neuer Erkenntnisse diente, war deren Anwendung auf Simulationen von zu schwarzen Löchern kollabierenden, rotierenden Sternen. Der Erfolg, diese Simulationen ohne Probleme mit den erwähnten Methoden durchzuführen, war ein wichtiger Schritt zu Simulationen gemischter Binärsysteme. Für Computersimulationen sind Anfangsdaten notwendig, die das gewünschte Problem beschreiben. Die Erstellung solcher Anfangsdaten ist jedoch unter Benutzung der allgemeinen Relativitätstheorie ausser in Spezialfällen sehr komplex. Wir zeigen, wie man einen schon vorhandenen Algorithmus für Anfangsdaten für zwei schwarze Löcher ändern kann, um Anfangsdaten für ein gemischtes Binärsystem zu erhalten. Diese Anfangsdaten wurden für Simulationen eines gemischten Binärsystems benutzt. Während dieser Simulationen traten mehrere Probleme auf. Zwei dieser Probleme waren numerische Instabilitäten unterschiedlicher Herkunft. Beide konnten jedoch mit angepasst starker Dissipation (der künstliche Entnahme von hochfrequenter Energie aus dem System) unterdrückt werden. Ein weiteres Problem war die erwartete Bewegung des schwarzen Lochs in Richtung des Neutronensterns. Da ein Teil des Simulationsgebietes innerhalb des schwarzen Lochs ausgeschnitten wird und das verwendete Programm bewegte Ausschneidegebiete nicht behandeln kann, darf sich das schwarze Loch jedoch auf dem Gitter kaum bewegen. Wir haben dieses Problem durch eine an das Problem angepasste Eichbedingung gelöst, die auf Bewegungen des scheinbaren Horizons reagiert und die Position des schwarzen Lochs auf diese Weise nahezu konstant hält. Die Methoden und Simulationen dieser Arbeit sind nur der Anfangspunkt einer ausführlichen Studie von Binärsystemen eines schwarzen Lochs und eines Neutronensterns. Bessere Methoden, Modelle und Simulationen mit höherer Auflösung und besser an das System angepassten Koordinaten werden Mittelpunkt zukünftiger Arbeit sein. Es wird erwartet, dass solche detailierten Studien Erkenntnisse über die abgestrahlten Gravitationswellen liefern, die gerade in Hinblick auf die neuen Gravitationswellendetektoren wichtig sind. Weiterhin könnten diese Simulationen dabei helfen, die Prozesse, die kurze Gammastrahlungsblitze hervorrufen, und über die im Moment kaum etwas bekannt ist, aufzuklären. KW - Relativistische Astrophysik KW - Neutronensterne KW - schwarze Löcher KW - neutron stars KW - black holes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7743 ER - TY - THES A1 - Unterstab, Gunhild T1 - Charakterisierung der viralen Genprodukte p10 und P des Borna Disease Virus T1 - Characterization of the viral gene products p10 and P of the Borna disease virus N2 - Das Borna Disease Virus (BDV, Bornavirus) besitzt ein einzelsträngiges RNA-Genom negativer Polarität und ist innerhalb der Ordnung Mononegavirales der Prototyp einer eigenen Virusfamilie, die der Bornaviridae. Eine außergewöhnliche Eigenschaft des Virus ist seine nukleäre Transkription und Replikation, eine weitere besteht in seiner Fähigkeit, als neurotropes Virus sowohl in vivo als auch in vitro persistente Infektionen zu etablieren. Die zugrunde liegenden Mechanismen sowohl der Replikation als auch der Persistenz sind derzeit noch unzureichend verstanden, auch deshalb, weil das Virus noch relativ „jung“ ist: Erste komplette Sequenzen des RNA-Genoms wurden 1994 publiziert und erst vor einigen Monaten gelang die Generierung rekombinanter Viren auf der Basis klonierter cDNA. Im Mittelpunkt dieser Arbeit standen das p10 Protein und das Phosphoprotein (P), die von der gemeinsamen Transkriptionseinheit II in überlappenden Leserahmen kodiert werden. Als im Kern der Wirtszelle replizierendes Virus ist das Bornavirus auf zelluläre Importmechanismen angewiesen, um den Kernimport aller an der Replikation beteiligten viralen Proteine zu gewährleisten. Das p10 Protein ist ein negativer Regulator der viralen RNA-abhängigen RNA-Polymerase (L). In vitro Importexperimente zeigten, dass p10 über den klassischen Importin alpha/beta abhängigen Kernimportweg in den Nukleus transportiert wird. Dies war unerwartet, da p10 kein vorhersagbares klassisches Kernlokalisierungssignal (NLS) besitzt und weist darauf hin, dass der zelluläre Importapparat offensichtlich flexibler ist als allgemein angenommen. Die ersten 20 N-terminalen AS vermitteln sowohl Kernimport als auch die Bindung an den Importrezeptor Importin alpha. Durch Di-Alanin-Austauschmutagenese wurden die für diesen Transportprozess essentiellen AS identifiziert und die Bedeutung hydrophober und polarer AS-Reste demonstriert. Die Fähigkeit des Bornavirus, persistente Infektionen zu etablieren, wirft die Frage auf, wie das Virus die zellulären antiviralen Abwehrmechanismen, insbesondere das Typ I Interferon (IFN)-System, unterwandert. Das virale P Protein wurde in dieser Arbeit als potenter Antagonist der IFN-Induktion charakterisiert. Es verhindert die Phosphorylierung des zentralen Transkriptionsfaktors IRF3 durch die zelluläre Kinase TBK1 und somit dessen Aktivierung. Der Befund, dass P mit TBK1 Komplexe bildet und zudem auch als Substrat für die zelluläre Kinase fungiert, erlaubt es, erstmalig einen Mechanismus zu postulieren, in dem ein virales Protein (BDV-P) als putatives TBK1-Pseudosubstrat die IRF3-Aktivierung kompetitiv hemmt. N2 - The Borna Disease Virus (BDV) harbors a single stranded RNA genome of negative polarity. Within the order of Mononegavirales it is the prototype of a new virus family named Bornaviridae. Unique features of this neurotrope virus are its nuclear transcription and replication as well as its ability to establish persistent infections both in vivo and in vitro. The underlying mechanisms of BDV replication and persistence are currently not well understood amongst others due to the fact that BDV is quite a young virus: First complete sequences of the RNA genome have been published in 1994. Only a few months ago the generation of a recombinant Bornavirus from cloned cDNA has been accomplished. The work presented here focused on the viral p10 protein and the phosphoprotein P that are both encoded by two overlapping reading frames of the transcription unit II. Nuclear replication of the Bornavirus relies on cellular import mechanisms to allow for nuclear import of viral proteins involved in viral replication. The p10 protein has been described as a negative regulator of the viral RNA dependent RNA polymerase (L). In vitro import experiments revealed that p10 translocates into the nucleus via the classical importin alpha/beta; dependent pathway. This was unexpected since p10 does not contain a predictable classical nuclear localization signal (NLS) suggesting that the cellular import machinery is more flexible than generally believed. The first 20 amino acids mediate nuclear import and binding to the import receptor importin alpha. Analysis of di-alanine-exchange mutants identified essential amino acids and furthermore revealed the impact of hydrophobic and polar side chains in receptor binding and nuclear import. The ability of the Bornavirus to establish persistent infections rises the question of how the virus circumvents cellular antiviral defense mechanisms, in particular the type I interferon system. This work characterizes the viral P protein as a potent antagonist of IFN beta induction. It prevents the activation of the central transcription factor IRF3 by interfering with the cellular kinase TBK1. The finding that P forms complexes with TBK1 and moreover serves as a kinase substrate allows to postulate a mechanism for the first time, in which a viral protein (BDV-P) acts as a putative TBK1 pseudo-substrate and thereby competitively inhibits IRF3 activation. KW - Interferon KW - Borna Disease Virus KW - Kernlokalisierungssignal KW - Importin KW - IRF3 KW - TBK1 KW - Borna disease virus KW - nuclear localization signal KW - importin KW - IRF3 KW - TBK1 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6905 ER - TY - THES A1 - Andersen, Audrée T1 - Surfactant dynamics at interfaces : a series of second harmonic generation experiments T1 - Surfactant Dynamik an Grenzflächen : eine Studie über SHG-Experimente N2 - Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants. N2 - Amphiphile vereinen zwei gegensätzliche Strukturelemente in einem Molekül, eine hydrophile Kopfgruppe und ein hydrophobe, meist aliphatische Kette. Aufgrund der molekularen Asymmetrie erfolgt eine spontane Adsorption an der Wasser-Luft Grenzfläche. Die Adsorptionsschicht verändert die makroskopischen Eigenschaften des Materials, z.B. die Grenzflächenspannung wird erniedrigt. Amphiphile sind zentrale Bauelemente der Kolloid- und Grenzflächenforschung, die Phänomene, wie Schäume ermöglichen. Eine Schaumlamelle besteht aus einem dünnen Wasserfilm, der durch zwei Adsorptionsschichten stabilisiert wird. Die Stabilität der Lamelle wird durch die Grenzflächenrheologie entscheidend geprägt. Die wesentliche makroskopische Größe in diesem Zusammenhang ist das so genannte Grenzflächendilatationsmodul E. Es beschreibt die Fähigkeit des Systems die Gleichgewichtsgrenzflächenspannung nach einer Expansion oder Dilatation der Adsorptionschicht wieder herzustellen. Das Modul E ist eine komplexe Größe, in dem der Imaginärteil direkt mit der Schaumstabilität korreliert. Diese Arbeit widmet sich der Grenzflächenrheologie. In der Literatur werden zwei kontroverse Modelle zur Interpretation dieser Größe diskutiert. Diese Modelle werden experimentell in dieser Arbeit überprüft. Dies erfordert die Entwicklung neuer experimenteller Aufbauten basierend auf nichtlinearen, optischen Techniken. Mit diesen Experimenten konnte eines der Modelle bestätigt werden. KW - Tensid KW - Grenzflächenchemie KW - Nichtlineare Spektroskopie KW - Oscillating Bubble KW - surfactants KW - nonlinear optics KW - surface rheology KW - air-water interface KW - oscillating bubble Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6553 ER - TY - THES A1 - Kugel, Rudolf T1 - Ein Beitrag zur Problematik der Integration virtueller Maschinen T1 - A contribution to the problem of integrating virtual machines N2 - Moderne Softwaresysteme sind komplexe Gebilde, welche häufig im Verbund mit anderen technischen und betriebswirtschaftlichen Systemen eingesetzt werden. Für die Hersteller solcher Systeme stellt es oft eine große Herausforderung dar, den oft weit reichenden Anforderungen bezüglich der Anpassbarkeit solcher Systeme gerecht zu werden. Zur Erfüllung dieser Anforderungen hat es sich vielfach bewährt, eine virtuelle Maschine in das betreffende System zu integrieren. Die Dissertation richtet sich insbesondere an Personen, die vor der Aufgabe der Integration virtueller Maschinen in bestehende Systeme stehen und zielt darauf ab, solche für die Entscheidung über Integrationsfragen wichtigen Zusammenhänge klar darzustellen. Typischerweise treten bei der Integration einer virtuellen Maschine in ein System eine Reihe unterschiedlicher Problemstellungen auf. Da diese Problemstellungen oft eng miteinander verzahnt sind, ist eine isolierte Betrachtung meist nicht sinnvoll. Daher werden die Problemstellungen anhand eines zentral gewählten, sehr umfangreichen Beispiels aus der industriellen Praxis eingeführt. Dieses Beispiel hat die Integration der "Java Virtual Machine" in den SAP R/3 Application Server zum Gegenstand. Im Anschluss an dieses Praxisbeispiel wird die Diskussion der Integrationsproblematik unter Bezug auf eine Auswahl weiterer, in der Literatur beschriebener Integrationsbeispiele vertieft. Das Hauptproblem bei der Behandlung der Integrationsproblematik bestand darin, dass die vorgefundenen Beschreibungen, der als Beispiel herangezogenen Systeme, nur bedingt als Basis für die Auseinandersetzung mit der Integrationsproblematik geeignet waren. Zur Schaffung einer verwertbaren Diskussionsgrundlage war es daher erforderlich, eine homogene, durchgängige Modellierung dieser Systeme vorzunehmen. Die Modellierung der Systeme erfolgte dabei unter Verwendung der "Fundamental Modeling Concepts (FMC)". Die erstellten Modelle sowie die auf Basis dieser Modelle durchgeführte Gegenüberstellung der unterschiedlichen Ansätze zur LÖsung typischer Integrationsprobleme bilden den Hauptbeitrag der Dissertation. Im Zusammenhang mit der Integration virtueller Maschinen in bestehende Systeme besteht häufig der Bedarf, zeitgleich mehrere "Programme" durch die integrierte virtuelle Maschine ausführen zu lassen. Angesichts der Konstruktionsmerkmale vieler heute verbreiteter virtueller Maschinen stellt die Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" eine große Herausforderung dar. Die Darstellung des Spektrums an Maßnahmen zur Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" bildet einen zweiten wesentlichen Beitrag der Dissertation. N2 - Modern software systems are complex entities which are frequently linked to other technical and economic systems. For the manufacturers of such systems it often represents a big challenge to fulfill the demanding requirements concerning the adaptability of such systems. One possible way to meet the demands is to integrate a virtual machine into the system concerned. This thesis is primarily intended to be used by persons who intend to integrate a virtual machine into an existing system. The primary goal is to pinpoint those dependencies which are important for decisions about integration questions. The integration of a virtual machine into an existing system is typically accompanied by many different problems. Since these problems are often closely interconnected, it often makes no sense to treat them individually. Therefore, the problems are introduced along with an adequately chosen, complex real life example. This example deals with the integration of the "Java Virtual Machine" into the "SAP R/3" application server. Following this practical example, the discussion of integration problems is deepened by presenting an assortment of additional examples taken from the literature. The main problem encountered during the treatment of the integration process was caused by inadequate and incomparable descriptions of the samples used. The existing descriptions were therefore unsuitable as a basis of discussion for the integration topic. For a useful discussion, it was necessary to prepare a uniform and sound modeling of these systems. This was done by adopting the "Fundamental Modeling Concepts (FMC)" technique. The created models as well as the comparison of the different approaches that can be used to solve typical integration problems form the main contribution of the thesis. The integration of virtual machines into existing systems is frequently accompanied by the requirement to have the integrated virtual machine process several "programs" simultaneously. In view of the design features of many common virtual machines, the realization of a virtual machine integration that allows the integrated virtual machine to be operated in "multiprogram" mode is still challenging. The most challenging task in this context is the problem of keeping the resource usage of the system at a tolerable level. A comparison of measures that can be taken to reduce the resource usage of an integrated virtual machine that can be operated in "multiprogram" mode forms a second essential contribution of the thesis. KW - Virtuelle Maschine KW - VM KW - Java Virtual Machine KW - Java 2 Enterprise Edition KW - IBM 360 KW - VM Integration KW - Application Server KW - Fundamental Modeling Concepts KW - PAVM Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7195 ER - TY - THES A1 - Gürtler, Christine T1 - Soziale Ungleichheit unter Kindern : über die Rolle von Kind- und Elternhausmerkmalen für die Akzeptanz und den Einfluss eines Kindes in seiner Schulklasse T1 - Social Inequality among children : the role of child- and parental attributes for the acceptance and the influence of children in their school-classes N2 - Ziel der Studie war die Untersuchung individueller und familialer Faktoren für den sozialen Status eines Kindes in seiner Schulklasse. Durch die Unterscheidung von Akzeptanz und Einfluss als zweier Hauptdimensionen des sozialen Status konnte die Arbeit aufklären, welche Rolle verschiedene Attribute für das Erreichen von Akzeptanz oder Einfluss spielen. 234 Dritt- und Fünftklässler aus Berliner Grundschulen erhielten soziometrische Maße, durch welche der soziale Status erhoben wurde (Akzeptanz und Einfluss). Individuelle und familiale Faktoren wurden mittels Peernominationen über das Verhalten der Kinder (Fremdurteil), Schulnoten (Lehrerangabe)und Maße des sozio-ökonomischen Status der Eltern (Elternangabe)erhoben. Die Ergebnisse zeigen, dass Akzeptanz positiv mit prosozialem und negativ mit aggressivem Verhalten eines Kindes assoziiert ist. Die Zusammenhänge dieser Verhaltensweisen mit Einfluss wiesen in dieselbe Richtung, waren aber deutlich geringer. Ideenreichtum und Humor hingen mit Akzeptanz und Einfluss gleichermaßen positiv zusammen, sowie Traurigsein gleichermaßen negativ mit beiden Statusdimensionen verbunden war. Das Verhalten eines Kindes vermittelte den Zusammenhang zwischen Merkmalen wie Geschlecht, relativem Alter, Schulnoten und der Akzeptanz und dem Einfluss eines Kindes. Zum Beispiel war die positive Beziehung zwischen Schulnoten und dem sozialen Status überwiegend auf die mit(guten)Schulnoten assoziierten Verhaltensweisen Prosozialität und (geringe) Aggressivität zurückzuführen. Die größere Akzeptanz von Mädchen ließ sich ebenso durch deren größere Prosozialität und geringere Aggressivität erklären. Jungen waren im Hinblick auf ihren Einfluss sowohl am oberen als auch am unteren Ende der Hierarchie überrepräsentiert. Sowohl sehr einflussreiche als auch einflusslose Jungen zeichneten sich durch eine erhöhte Aggressivität aus. Komplexere Analysen wiesen daraufhin, dass Jungen negative Auswirkungen von aggressivem Verhalten durch Humor und Ideenreichtum auf ihren Status kompensieren konnten. Der moderate Zusammenhang zwischen dem elterlichen sozioökonomischen Status und dem sozialen Status des Kindes wurde vollständig durch das Verhalten des Kindes mediiert. Das Elternhaus war wichtiger für die Akzeptanz als für den Einfluss eines Kindes. Kinder mit Migrationshintergrund waren sowohl weniger akzeptiert als auch weniger einflussreich in ihrer Klasse. Elterliche Trennung trug nicht zur sozialen Position eines Kindes bei. N2 - The goal of this study was to investigate individual and familial factors contributing to a child’s social status in its schoolclass. Separating acceptance and influence as two main dimensions of social status, this work aims at clarifying the impact of different attributes for becoming accepted or influential. 234 third and fifth grade children from Berlin schools were administered sociometric measures providing information about social status (acceptance and influence). The contributing factors where measured using peer nominations of each child’s behaviour, school-grades and familial variables such as the parents’ socio-economic status. Results show that acceptance was positively linked to prosocial and negatively linked to aggressive behaviour. Pointing in the same direction, influence was less related to aggression and prosociality than acceptance. Having ideas and a sense of humour contributed positively and being sad contributed negatively to both dimensions of social status. Furthermore, behavioural tendencies mediated the impact of non-behavioural attributes such as gender, relative age in class and school-grades on social status. For example, the positive relation between schoolgrades and social status was mainly mediated by prosocial and non-aggressive behaviour. Looking at gender, girls were more prosocial and less aggressive than boys and therefore more accepted than the latter. Within their class boys were more often represented at both ends of the influence dimension than girls. Moreover highly influential as well as powerless boys were found to be rather aggressive. More complex analyses showed that boys could possibly compensate the negative impact of aggression with humour and ideas. The moderate relation between parental SES and a child’s socials status was fully mediated by a child’s behaviour. SES was more important for the acceptance than for the influence of a child. Children with a migration background were both less accepted and influential. Parental separation did not contribute to a child’s social position. KW - Soziale Ungleichheit KW - Soziometrie KW - Macht KW - Gleichaltrigenbeziehungen KW - Sozialer Status KW - Popularity KW - Power KW - Sociometry KW - Social Status KW - peer relations Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-16797 ER - TY - THES A1 - Meinke, Anja T1 - Nikotineffekte auf räumliche Aufmerksamkeitsprozesse bei Nichtrauchern T1 - Effects of nicotine on visual attention in non-smokers N2 - Nikotin in den unterschiedlichsten Darreichungsformen verringert bei verschiedenen Spezies im räumlichen Hinweisreizparadigma die Kosten invalider Hinweisreize. Welcher Teilprozess genau durch Nikotin beeinflusst wird, ist bislang nicht untersucht worden. Die gängige Interpretation ist, daß Nikotin das Loslösen von Aufmerksamkeit von einem bisher beachteten Ort erleichtert. In fünf Studien, drei elektrophysiologischen und zwei behavioralen wurden drei mögliche Mechanismen der Nikotinwirkung an Nichtrauchern untersucht. Experiment 1 und 2 gingen der Frage nach, ob Nikotin eine Modulation sensorischer gain Kontrolle bewirkt. Dazu wurden ereigniskorrelierte Potentiale (EKP) im Posner-Paradigma erhoben und die Wirkung von Nikotin auf die aufmerksamkeitsassoziierten Komponenten P1 und N1 betrachtet. Nikotin verringerte die Kosten invalider Hinweisreize bei Aufmerksamkeitslenkung durch endogene Hinweisreize, nicht aber bei exogenen Hinweisreizen. Die P1 und N1 Komponenten zeigten sich unbeeinflusst von Nikotin, damit findet also die Annahme einer Wirkung auf sensorische Suppression keine Unterstützung. In Experiment 3 und 4 wurde untersucht, ob Nikotin einen Effekt auf kostenträchtige unwillkürliche Aufmerksamkeitsverschiebungen, Distraktionen, hat. In Experiment 3 wurden in einem räumlichen Daueraufmerksamkeitsparadigma Distraktionen durch deviante Stimulusmerkmale ausgelöst und die Wirkung von Nikotin auf eine distraktionsassoziierte Komponente des EKP, die P3a, betrachtet. In Experiment 4 wurde in einem Hinweisreizparadigma durch zusätzliche Stimuli eine Distraktion ausgelöst und die Nikotinwirkung auf die Reaktionszeitkosten untersucht. Nikotin zeigte keinen Einfluss auf Distraktionskosten in beiden Studien und auch keine Wirkung auf die P3a Komponente in Experiment 3. In Experiment 4 wurde zusätzlich die Wirkung von Nikotin auf das Loslösen von Aufmerksamkeit untersucht, indem die Schwierigkeit des Loslösens variiert wurde. Auch hier zeigte sich keine Nikotinwirkung. Allerdings konnte in beiden Studien weder die häufig berichtete generelle Reaktionszeitverkürzung noch die Verringerung der Kosten invalider Hinweisreize repliziert werden, so dass zum Einen keine Aussage über die Wirkung von Nikotin auf Distraktionen oder den Aufmerksamkeitsloslöseprozess gemacht werden können, zum Anderen sich die Frage stellte, unter welchen Bedingungen Nikotin einen differentiellen Effekt überhaupt zeigt. Im letzten Experiment wurde hierzu die Häufigkeit der Reaktionsanforderung einerseits und die zeitlichen Aspekte der Aufmerksamkeitslenkung andererseits variiert und der Effekt des Nikotins auf den Validitätseffekt, die Reaktionszeitdifferenz zwischen valide und invalide vorhergesagten Zielreizen, betrachtet. Nikotin verringerte bei Individuen, bei denen Aufmerksamkeitslenkung in allen Bedingungen evident war, in der Tendenz den Validitätseffekt in der ereignisärmsten Bedingung, wenn nur selten willentliche Aufmerksamkeitsausrichtung notwendig war. Dies könnte als Hinweis gedeutet werden, dass Nikotin unter Bedingungen, die große Anforderungen an die Vigilanz stellen, die top-down Zuweisung von Aufmerksamkeitsressourcen unterstützt. N2 - Nicotine has consistently been shown to improve performance on a range of attentional tasks. In spatial cueing (Posner-type) paradigms, where a cue indicates the likely location of a subsequent target stimulus, nicotine influences the ability to react to invalidly cued targets across different species and ways of administration. Previous research suggested that the cholinergic effect is due to a facilitated disengagemant of attention from the cued location. In five studies with nonsmoking subjects, three candidate mechanisms of nicotinic action were examined. Experiment 1 and experiment 2 investigated whether nicotine modulates attentional processes of sensory gain control. In a Posner-paradigm event-related potentials (ERP) were measured and the effect of nicotine on the attention-related components P1 and N1 was assessed. Behaviorally, nicotine reduced the costs of invalid cueing when cues were endogenous, but not with exogenous cues. Electrophysiologically, the P1 and N1 components were not affected by nicotine. These data provide therefore no support for the notion of a nicotine-modulated attentional suppression. In experiment 3 and 4 the effect of nicotine on involuntary distracting attention shifts was investigated. In experiment 3 ERPs were measured in a spatial sustained attention paradigm, where rare changes in a target stimulus attribute were used as distractors. The effect of nicotine on the distraction-associated P3a component was assessed. In experiment 4 the effect of nicotine on the reaction time costs of additional distracting stimuli was studied in a Posner paradigm. In both studies nicotine did not show an effect on distractions, neither in the reaction time costs nor in the parameters of the P3a component. Experiment 4 also investigated whether nicotine has an effect on the disengagement of attention by varying the difficulty of disengaging one's focus from the cued location. Again, nicotine did not show an effect. However, experiment 3 and 4 also neither replicated the commonly reported general nicotinic reduction of reaction times nor the differential reduction of the costs of invalid cueing. Therefore, regarding the effect of nicotine on distraction and on the disengagement of attention the data remain inconclusive. However, these data suggest that there are conditions and mechanisms moderating nicotinic action, that are still unknown. Accordingly, experiment 5 made the attempt to determine such conditions. Response frequency and temporal characteristics of attention orientation were varied. In individuals, who evidently had shifted their attention, nicotine reduced the validity effect under uneventful conditions, when attention was not to be shifted in each trial. This might suggest that nicotine facilitates the top-down allocation of attentional resources in vigilance-demanding situations. KW - Nicotin KW - Aufmerksamkeit KW - Kognition KW - Acetylcholin KW - Ereigniskorreliertes Potenzial KW - attention KW - nicotine KW - actylcholine KW - cognition KW - event-related potentials Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7659 ER - TY - THES A1 - Prevot, Michelle Elizabeth T1 - Introduction of a thermo-sensitive non-polar species into polyelectrolyte multilayer capsules for drug delivery T1 - Einbettung unpolarer, temperaturempfindlicher Substanzen in Polyelektrolytkapselsysteme zur Wirkstofffreisetzung N2 - The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest. N2 - Verkapselung ist ein vielseitiges Werkzeug, das zum Schutz und zum Transport von Molekülen ebenso eingesetzt werden kann, wie zur Verbindung von Reaktionspartnern in einem gemeinsamen, von der Umgebung abgeschirmten Raum. Es basiert auf einem einfachen Vorbild der Natur. Pflanzen schützen ihren Samen zum Beispiel durch eine harte, nahezu undurchdringbare Schale (Nüsse) oder durch eine selektiv durchlässige Hülle, wie bei Weizen, der sobald er feucht wird zu keimen beginnt. Die Natur setzt durch den Einsatz des Hülle-Kern Prinzips sehr effizient die Kontrolle über Durchlässigkeit und Anpassung an bestimmte Aufgaben um. Wird das Hülle-Kern-Prinzip zum Schutz oder Transport von Molekülen eingesetzt, so sind die zu verwendenden Kapseln nur wenige Mikrometer groß. Sie werden dann als Mikrokapseln bezeichnet. Zur Erzeugung dieser Mikrokapseln werden verschiedene Methoden verwendet. Der heute übliche Weg geht von einer ca. 5-10 Mikrometer großen Kugel (Kern) aus, die mit einer stabilen und an die gewünschten Eigenschaften angepassten Schicht von wenigen Nanometern versehen wird. Im Anschluss wird der Kern herausgelöst und eine hohle, stabile Kapsel erhalten. Schichten von wenigen Nanometern Dicke können aus Polyelektrolyten durch das Layer-by-Layer-Verfahren (LbL) hergestellt werden. Dieses Verfahren eignet sich auf Grund seiner vielen Anpassungsmöglichkeiten besonders zum Aufbau der Schichten für Mikrokapseln, da sich die Eigenschaften der Beschichtung bereits beim Aufbau der Schicht auf die Bedürfnisse maßschneidern lassen. Diese Arbeit befasst sich mit der Erzeugung von Mikrokapseln, deren Eigenschaften temperaturabhängig sind. Dies wurde auf zwei Wegen erreicht. Zum einen wurden Kapseln aus Polyelektrolyten und Wachs aufgebaut. Bei Temperaturerhöhung schmilzt das Wachs und versiegelt die Kapsel. Zum anderen werden Kapseln mit einem Wärme empfindlichen Polymer gefüllt. Bei Temperaturerhöhung kollabiert das Polymergerüst. Der enthaltene Wirkstoff wird freigesetzt. KW - Mikrokapsel KW - Polyelektrolyt KW - Mehrschichtsysteme KW - Polyelectrolyte KW - Multilayers KW - Capsule Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7785 ER - TY - THES A1 - Schauer, Nicolas T1 - Quantitative trait loci (QTL) for metabolite accumulation and metabolic regulation : metabolite profiling of interspecific crosses of tomato T1 - Metabolomische Analyse von interspezifischen Tomaten N2 - The advent of large-scale and high-throughput technologies has recently caused a shift in focus in contemporary biology from decades of reductionism towards a more systemic view. Alongside the availability of genome sequences the exploration of organisms utilizing such approach should give rise to a more comprehensive understanding of complex systems. Domestication and intensive breeding of crop plants has led to a parallel narrowing of their genetic basis. The potential to improve crops by conventional breeding using elite cultivars is therefore rather limited and molecular technologies, such as marker assisted selection (MAS) are currently being exploited to re-introduce allelic variance from wild species. Molecular breeding strategies have mostly focused on the introduction of yield or resistance related traits to date. However given that medical research has highlighted the importance of crop compositional quality in the human diet this research field is rapidly becoming more important. Chemical composition of biological tissues can be efficiently assessed by metabolite profiling techniques, which allow the multivariate detection of metabolites of a given biological sample. Here, a GC/MS metabolite profiling approach has been applied to investigate natural variation of tomatoes with respect to the chemical composition of their fruits. The establishment of a mass spectral and retention index (MSRI) library was a prerequisite for this work in order to establish a framework for the identification of metabolites from a complex mixture. As mass spectral and retention index information is highly important for the metabolomics community this library was made publicly available. Metabolite profiling of tomato wild species revealed large differences in the chemical composition, especially of amino and organic acids, as well as on the sugar composition and secondary metabolites. Intriguingly, the analysis of a set of S. pennellii introgression lines (IL) identified 889 quantitative trait loci of compositional quality and 326 yield-associated traits. These traits are characterized by increases/decreases not only of single metabolites but also of entire metabolic pathways, thus highlighting the potential of this approach in uncovering novel aspects of metabolic regulation. Finally the biosynthetic pathway of the phenylalanine-derived fruit volatiles phenylethanol and phenylacetaldehyde was elucidated via a combination of metabolic profiling of natural variation, stable isotope tracer experiments and reverse genetic experimentation. N2 - Die Einführung von Hochdurchsatzmethoden zur Analyse von biologischen Systemen, sowie die umfangreiche Sequenzierung von Genomen haben zu einer Verlagerung der Forschung „im Detail“ zu einer ganzheitlicheren Betrachtungsweise auf Systemebene geführt. Aus einer jahrhundertlangen, intensiven Züchtung und Selektion von Nutzpflanzen resultierte gleichzeitig eine Abnahme der genetischen Varianz. Daraus resultierend sind Nutzpflanzen anfälliger gegenüber Stressfaktoren, wie Pathogenen, hohen Salzkonzentrationen oder Trockenheit, als ihre Wildarten. Das Potential konventioneller Züchtung scheint somit heute an seine Grenzen gekommen zu sein. Daher versucht man mittels moderner Molekulartechnik, wie zum Beispiel Marker-gestützte Selektion, Gene oder ganze Genombereiche von Wildarten mit hoher genetischer Variation in Nutzpflanzen einzukreuzen, vornehmlich mit dem Ziel einer Ertrags- bzw. Resistenzsteigerung. Neueste medizinische Studien belegen, dass die Ernährung eine wesentliche Rolle für die menschliche Gesundheit spielt. Besonders wichtig sind hierbei die gesundheitsfördernden Substanzen in pflanzlichen Nahrungsmitteln. Aus diesem Grund kommt der Erforschung der biochemischen Zusammensetzung von biologischen Proben eine immer größere Bedeutung zu. Diese Untersuchung kann elegant durch Metabolitenprofile, welche die multivariate Analyse komplexer biologischer Proben erlauben, durchgeführt werden. In dieser Arbeit wurde zur Untersuchung der biochemischen Zusammensetzung von Tomatenwildarten und interspezifischen S. pennellii Tomatenintrogressionslinien (IL) eine GC/MS basierte Metabolitenanalyseplattform verwendet. Hierzu war es zunächst notwendig eine Massenspektrenbibliothek, zur Annotierung von Massenspektren und Retentionsindices von, in pflanzlichen Proben vorkommenden, Metaboliten anzulegen. Die Analyse der Tomatenwildarten ergab große Unterschiede gegenüber der Kulturtomate im Hinblick auf den Gehalt an Amino- und organischen Säuren, sowie der Zuckerzusammensetzung und den Gehalt an Sekundärmetaboliten. Die darauf folgende Analyse der ILs, von den jede ein genau definiertes genomisches Segment von S. pennellii beinhaltet, bestätigte diese enorme Variation mit 889 metabolischen und 326 ertragsassozierten-Veränderungen in den ILs. Die metabolischen Veränderungen zeichneten sich durch abnehmende bzw. steigende Gehalte von einzelnen Metaboliten, aber auch durch eine koordinierte Änderung aus. In dieser Arbeit wurde weiterhin der Biosyntheseweg der Volatilenstoffe Phenylethanol und Phenylacetaldehyd mit Hilfe einer IL untersucht. Hierbei konnten durch stabile Isotopenmarkierung und eines „reverse genetics“-Ansatzes Gene bzw. Enzyme identifiziert werden, die für die Dekarboxylierung des Eduktes Phenylalanin verantwortlich sind. Diese Arbeit beschreibt erstmals die umfassende Analyse von biochemischen Komponenten auf Genombasis in Tomatenintrogressionslinien und zeigt damit ein Werkzeug auf zur Identifizierung von qualitativen biochemischen Merkmalen in der modernen molekularen Züchtung. KW - Tomate KW - Metabolit KW - GC-MS KW - Introgression KW - Frucht KW - Metabolome KW - Züchtung KW - metabolic genomics KW - Tomato KW - metabolite profiling KW - metabolome KW - breeding KW - crops KW - fruit KW - metabolite breeding KW - metabolic genomics Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7643 ER - TY - THES A1 - Ott, Christian David T1 - Stellar iron core collapse in {3+1} general relativity and the gravitational wave signature of core-collapse supernovae T1 - Stellarer Eisenkernkollaps in Allgemeiner Relativitätstheorie und die Gravitationswellensignatur von Kern-Kollaps-Supernovae N2 - I perform and analyse the first ever calculations of rotating stellar iron core collapse in {3+1} general relativity that start out with presupernova models from stellar evolutionary calculations and include a microphysical finite-temperature nuclear equation of state, an approximate scheme for electron capture during collapse and neutrino pressure effects. Based on the results of these calculations, I obtain the to-date most realistic estimates for the gravitational wave signal from collapse, bounce and the early postbounce phase of core collapse supernovae. I supplement my {3+1} GR hydrodynamic simulations with 2D Newtonian neutrino radiation-hydrodynamic supernova calculations focussing on (1) the late postbounce gravitational wave emission owing to convective overturn, anisotropic neutrino emission and protoneutron star pulsations, and (2) on the gravitational wave signature of accretion-induced collapse of white dwarfs to neutron stars. N2 - Ich präsentiere die ersten Computer-Simulationen des rotierenden Kollapses stellarer Eisenkerne, die in der {3+1}-Zerlegung der Allgemeinen Relativitätstheorie durchgeführt werden und Vorsupernova-Sternmodelle aus Sternentwicklungsrechnungen, eine heiße nukleare Zustandsgleichung und ein näherungsweises Verfahren zur Beschreibung des Elektroneneinfangs enthalten und Neutrinodruck-Effekte berücksichtigen. Basierend auf den Ergebnissen dieser Rechnungen erhalte ich die zur Zeit realistischsten Vorhersagen für das Gravitationswellensignal der Kollaps, Abprall, Abkling und frühen Nach-Abprallphase einer Kern-Kollaps-Supernova. Neben den {3+1} Simulationen diskutiere ich newtonsche axisymmetrische Kern-Kollaps-Supernova-Simulationen mit Schwerpunkten auf: (1) der Gravitationswellenabstrahlung in der späten Nach-Abprallphase durch Konvektionsströmungen, anisotropische Neutrinoemission und Proto-Neutronenstern Pulsationen und (2) der Gravitationswellensignatur des Kollapses weißer Zwergsterne zu Neutronensternen, der durch Akkretion eingeleitet wird. KW - Gravitationswellen KW - Kern-Kollaps-Supernovae KW - Allgemeine Relativitätstheorie KW - Gravitational Waves KW - Core-Collapse Supernovae KW - General Relativity Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12986 ER - TY - THES A1 - Fritz, Christina T1 - Der Einfluß des primären Stickstoffstoffwechsels auf den Aminosäure- und Sekundärstoffwechsel in Nicotiana tabacum L. T1 - The impact of primary nitrogen metabolism on amino acid and secondary metabolism in Nicotiana tabacum L. N2 - Es ist bekannt, dass Änderungen im Kohlenstoff- bzw. Stickstoffstaus der Pflanzen zu einer parallelen statt reziproken Änderung der kohlenstoff- und stickstoffhaltigen Primärmetabolite führen. Unter diesem Gesichtspunkt wurden in der vorliegenden Arbeit der Aminosäurestoffwechsel und der Sekundärstoffwechsel unter reduzierten Stickstoffbedingungen untersucht. Zur Beeinflussung des Stickstoffstoffwechsels wurden nitratmangelernährte Tabakwildtyppflanzen und Genotypen mit unterschiedlich stark reduzierter Nitratreduktase-Aktivität verwendet. Dieses experimentelle System erlaubt zusätzlich durch den Vergleich Nitrat defizienter Wildtyppflanzen mit Nitrat akkumulierenden NIA-Transformanten Prozesse zu identifizieren, die durch Nitrat gesteuert werden. Die Analysen der Primär- und Sekundärmetabolite wurde in allen Genotypen diurnal durchgeführt, um auch tageszeitlich abhängige Prozesse zu identifizieren. Die Analyse der absoluten Gehalte aller individuellen Aminosäuren enthüllte bei den meisten erstaunlich stabile diurnale Muster mit einem Anstieg während des Tages und einem Abfall in der Nacht in Wildtyppflanzen gewachsen mit ausreichend Nitrat. Dieses Ergebnis legt die Schlussfolgerung nahe, dass die Biosynthese der Aminosäuren koordiniert abläuft. In Pflanzen mit reduziertem Stickstoffstatus haben diese diurnalen Muster jedoch keinen Bestand. Die Kombination des erzeugten stickstoffbasierten Aminosäuredatensatz in Kombination mit einem bereits erzeugten Aminosäuredatensatz unter kohlenstofflimitierten Bedingungen von Matt et al. (2002) führte durch Hauptkomponentenanalyse (PCA) und Korrelationsanalyse zu dem Ergebnis, dass die Hypothese nach einer koordinierten Aminosäurebiosynthese nicht allgemeine Gültigkeit hat. Die PCA identifizierte Glutamin, Glutamat, Aspartat, Glycin, Pheny-lalanin und Threonin als Faktoren, die den Datensätzen ihre charakteristische Eigenschaft und deren Varianz verleihen. Die Korrelationsanalyse zeigte, dass die sehr guten Korrelationen der individuellen Aminosäuren untereinander in reduzierten Stickstoff- und Kohlenstoffbedingungen sich verschlechtern. Das Verhältnis einer einzelnen Aminosäure relativ zu den anderen führte zur Identifizierung einiger Aminosäuren, die individuelle Antworten auf Stickstoff- und/oder Kohlenstoffstatus zeigen, und/oder speziell auf Nitrat, Licht und/oder den E-nergiestatus der Thylakoidmembran. Glutamat beispielsweise verhält sich in den meisten Situationen stabil, Phenylalanin dagegen zeigt in jeder physiologischen Situation eine individuelle Antwort. Die Ergebnisse dieser Arbeit führen zu einer Erweiterung der Hypothese einer koordinierten Synthese der Aminosäuren dahingehend, dass diese nicht generell für alle Aminosäuren angenommen werden kann. Es gibt einige Aminosäuren deren, Anteile sich situationsbedingt anpassen. Die Reduktion des Stickstoffstatus in nitratmangelernährten Tabakwildtyppflanzen führte zu der, nach der „Carbon-Nutrient-Balance“ Hypothese erwarteten Verlagerung der kohlenstoffreichen Phenylpropanoide und des stickstoffreichen Nikotins. Die Erhöhung der Phenylpropanoidgehalte war nicht in der Nitrat akkumulierenden NIA-Transformante zu beobachten und somit konnte Nitrat als regulatorisches Element identifiziert werden. Ein Einfluss der Vorläufermetabolite konnte ausgeschlossen werden, da sowohl nitratmangelernährter Wildtyp als auch die Nitrat akkumulierende NIA-Transformante ähnliche Gehalte dieser aufwiesen. Genexpressionsanalysen über Mikroarray-Hybridisierung und quantitative RT-PCR zeigten, dass Nitrat durch noch nicht geklärte Mechanismen Einfluss auf die Expression einiger Gene nimmt, die dem Phenylpropanoidstoffwechsels zugeordnet sind. Aus der Arbeit hervorgegangene Veröffentlichungen: Christina Fritz, Natalia Palacios-Rojas, Regina Feil und Mark Stitt (2006) Regulation of Secondary Metabolism by the Carbon-Nitrogen Status in Tobacco: Nitrate Inhibits Large Sectors of Phenylpropanoid Metabolism. Plant Journal 46, 533 - 548 Christina Fritz, Petra Matt, Cathrin Müller, Regina Feil und Mark Stitt (2006) Impact of the Carbon-Nitrogen Status on the Amino Acid Profile in Tobacco Source Leaves. Plant, Cell and Environment 29 (11), 2009 - 2111 N2 - It is known that changes in carbon and nitrogen status of a plant lead to parallel rather than reciprocal changes of carbon and nitrogen containing primary metabolites. Based on this finding the influence of carbon and nitrogen status on the amino acid profile as well as on secondary metabolism was investigated in tobacco. Manipulations of the nitrogen status were carried out in two ways: Tobacco wild type plants were cultivated in nitrogen-replete and nitrogen starved conditions; in addition nitrate accumulating transformants with reduced nitrate reductase (NIA) activity were used. The comparison of the nitrate starved wild type and the nitrate accumulating NIA-transformant allows to distinguish processes which were driven by the nitrogen status of a plant or by nitrate itself. Due to the fact that most primary metabolites have diurnal changes the analysis of primary and secondary metabolites were done at six different time points per day in order to identify diurnal processes. Analysis of the absolute levels of individual amino acids under normal nitrogen supply conditions reveals characteristic diurnal patterns for the majority of amino acids with an increase during the day and a decrease during the night. This result indicates that amino acid biosynthesis might be coordinated. However these diurnal patterns are no longer stable in plants with reduced nitrogen status; furthermore absolute levels of individual amino acids differed over a wide range of concentrations. The hypothesis of a coordinated regulation of amino acid metabolism was further tested by combining this dataset with an amino acid dataset produced under carbon limited conditions (Matt et al., 2002) and applying Principal Component Analysis (PCA) and correlation analysis. Glutamine, glutamate, aspartate, glycine, phenylalanine and threonine were responsible for the clear separation of the different genotypes and experimental conditions in the PCA plot. The data from the correlation analysis show that most of the minor amino acids have very good correlations under carbon and nitrogen sufficient conditions. These correlations became weaker with decreasing carbon and nitrogen status of the plants. These results clearly indicate that a coordinated biosynthesis of amino acids is not a general phenomenon. Comparing the levels of each individual amino acid to the total amino acid pool revealed specific answers of a particular amino acid to carbon and/or nitrogen status, to nitrate and/or light and to energy status of the thylakoid membrane. Glutamate for instance is remarkably stable in most of the conditions and phenylalanine shows an individual response in every situation. From these results it was concluded that the hypothesis of a coordinated biosynthesis of amino acids might be true for some amino acids, but clearly needs to be extended because some amino acids adjust their levels in an individual fashion depending on the external conditions. The reduction of nitrogen status of nitrate starved wild type plants leads to a shift from carbon-rich phenylpropanoids to nitrogen-rich nicotine as predicted by the “carbon-nutrient-balance hypothesis”. Increased phenylpropanoids were not observed in nitrate accumulating NIA-transformants. Therefore nitrate could be identified as a regulatory element in phenyl-propanoid metabolism. A regulatory influence of precursors could be excluded since nitrate starved wild type and NIA-transformant had similar levels. Genexpression analysis via microarry hybridisation and quantitative RT-PCR shows that nitrate acts a transcriptional regulator of genes involved in phenylpropanoid metabolism. The elucidation of this regulatory role of nitrate requires further investigation. KW - Nitrat KW - Aminosäuren KW - sekundäre Pflanzenstoffe KW - Stickstoff KW - Tabak KW - nitrate KW - amino acids KW - plant secondary metabolites KW - nitrogen KW - tobacco Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13322 ER - TY - THES A1 - Hoffmann, Toni T1 - Cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O'Kane and Al'Shehbaz and Arabidopsis thaliana (L.) Heynhold T1 - Klonierung und Charakterisierung des HMA3 Genes und seines Promotors aus Arabidopsis halleri (L.) O'Kane und Al'Shehbaz und Arabidopsis thaliana (L.) Heynhold N2 - Being living systems unable to adjust their location to changing environmental conditions, plants display homeostatic networks that have evolved to maintain transition metal levels in a very narrow concentration range in order to avoid either deficiency or toxicity. Hence, plants possess a broad repertoire of mechanisms for the cellular uptake, compartmentation and efflux, as well as for the chelation of transition metal ions. A small number of plants are hypertolerant to one or a few specific transition metals. Some metal tolerant plants are also able to hyperaccumulate metal ions. The Brassicaceae family member Arabidopis halleri ssp. halleri (L.) O´KANE and AL´SHEHBAZ is a hyperaccumulator of zinc (Zn), and it is closely related to the non-hypertolerant and non-hyperaccumulating model plant Arabidopsis thaliana (L.) HEYNHOLD. The close relationship renders A. halleri a promising emerging model plant for the comparative investigation of the molecular mechanisms behind hypertolerance and hyperaccumulation. Among several potential candidate genes that are probably involved in mediating the zinc-hypertolerant and zinc-hyperaccumulating trait is AhHMA3. The AhHMA3 gene is highly similar to AtHMA3 (AGI number: At4g30120) in A. thaliana, and its encoded protein belongs to the P-type IB ATPase family of integral membrane transporter proteins that transport transition metals. In contrast to the low AtHMA3 transcript levels in A. thaliana, the gene was found to be constitutively highly expressed across different Zn treatments in A. halleri, especially in shoots. In this study, the cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O´KANE and AL´SHEHBAZ and Arabidopsis thaliana (L.) HEYNHOLD is described. Heterologously expressed AhHMA3 mediated enhanced tolerance to Zn and to a much lesser degree to cadmium (Cd) but not to cobalt (Co) in metal-sensitive mutant strains of budding yeast. It is demonstrated that the genome of A. halleri contains at least four copies of AhHMA3, AhHMA3-1 to AhHMA3-4. A copy-specific real-time RT-PCR indicated that an AhHMA3-1 related gene copy is the source of the constitutively high transcript level in A. halleri and not a gene copy similar to AhHMA3-2 or AhHMA3-4. In accordance with the enhanced AtHMA3mRNA transcript level in A. thaliana roots, an AtHMA3 promoter-GUS gene construct mediated GUS activity predominantly in the vascular tissues of roots and not in shoots. However, the observed AhHMA3-1 and AhHMA3-2 promoter-mediated GUS activity in A. thaliana or A. halleri plants did not reflect the constitutively high expression of AhHMA3 in shoots of A. halleri. It is suggested that other factors e. g. characteristic sequence inserts within the first intron of AhHMA3-1 might enable a constitutively high expression. Moreover, the unknown promoter of the AhHMA3-3 gene copy could be the source of the constitutively high AhHMA3 transcript levels in A. halleri. In that case, the AhHMA3-3 sequence is predicted to be highly homologous to AhHMA3-1. The lack of solid localisation data for the AhHMA3 protein prevents a clear functional assignment. The provided data suggest several possible functions of the AhHMA3 protein: Like AtHMA2 and AtHMA4 it might be localised to the plasma membrane and could contribute to the efficient translocation of Zn from root to shoot and/or to the cell-to-cell distribution of Zn in the shoot. If localised to the vacuolar membrane, then a role in maintaining a low cytoplasmic zinc concentration by vacuolar zinc sequestration is possible. In addition, AhHMA3 might be involved in the delivery of zinc ions to trichomes and mesophyll leaf cells that are major zinc storage sites in A. halleri. N2 - Pflanzen sind lebende Systeme, die nicht in der Lage sind ihren Standort sich ändernden Umweltbedingungen anzupassen. Infolgedessen weisen Pflanzen homöostatischeNetzwerke auf, welche die Mengen an intrazellulären Übergangsmetallen in einem sehr engen Konzentrationsbereich kontrollieren um somit Vergiftungs- oder Mangelerscheinungen zu vermeiden. Eine kleine Anzahl von Pflanzen ist hypertolerant gegenüber einem oder mehreren Übergangsmetallen. Einige wenige dieser metalltoleranten Pflanzen sind fähig Übergangsmetalle in beträchtlichen Mengen zu speichern, sprich zu hyperakkumulieren, ohne Vergiftungserscheinungen zu zeigen. Die Haller’sche Schaumkresse (Arabidopis halleri ssp. halleri (L.) O´KANE und AL´SHEHBAZ) aus der Familie der Kreuzblütler (Brassicaceae) ist ein solcher Hyperakkumulator für Zink (Zn). Sie ist nah verwandt mit der Modellpflanze Ackerschmalwand (Arabidopsis thaliana (L.) HEYNHOLD), die jedoch nicht-hypertolerant und nicht-hyperakkumulierend für Übergangsmetalle ist. Diese nahe Verwandtschaft erlaubt vergleichende Studien der molekularen Mechanismen, die Hypertoleranz und Hyperakkumulation zu Grunde liegen. Zu der Gruppe von Kandidatengenen, die möglicherweise von Bedeutung für die Zink-hypertoleranten und -hyperakkumulierenden Eigenschaften von A. halleri sind, gehört AhHMA3, ein Gen mit großer Ähnlichkeit zu AtHMA3 (AGI Nummer: At4g30120) aus A. thaliana. Es kodiert ein Protein aus der Familie transmembraner Übergangsmetall-Transportproteine, den P-typ IB ATPasen. Im Gegensatz zu den niedrigen AtHMA3 Transkriptmengen in A. thaliana wird das AhHMA3 Gen in A. halleri in Gegenwart verschiedener Zn Konzentrationen konstitutiv hoch exprimiert, insbesondere im Spross der Pflanze. Diese Arbeit beschreibt die Klonierung und Charakterisierung des HMA3 Gens und seines Promoters aus A. halleri und A. thaliana. Es wurde gezeigt, dass heterolog exprimiertes AhHMA3 Protein in metallsensitiven Hefestämmen eine erhöhte Toleranz gegenüber Zink und zu einem geringen Grad gegenüber Kadmium (Cd) jedoch nicht gegenüber Kobalt (Co) vermittelt.Weiterhin wurden im Genom von A. halleri mindestens vier AhHMA3 Genkopien, AhHMA3-1 bis AhHMA3-4, nachgewiesen. Eine Genkopie-spezifische Echtzeit-RT-PCR (real-time RT-PCR) deutete darauf hin, dass eine zu AhHMA3-1 und nicht zu AhHMA3-2 oder AhHMA3-4 ähnliche Genkopie die Quelle der konstitutiv hohen Transkriptmengen in A. halleri ist. In Übereinstimmung mit erhöhten mRNS Transkriptmengen inWurzeln von A. thaliana, vermittelte ein AtHMA3 Promoter-GUS (ß-Glucuronidase) Genkonstrukt GUS-Aktivität hauptsächlich in den Leitgeweben der Wurzeln jedoch nicht des Sprosses. Die vermittelte GUS-Aktivität durch Promoterfragmente von AhHMA3-1 und AhHMA3-2 in A. thaliana oder A. halleri Pflanzen spiegelte jedoch nicht die konstitutiv hohe AhHMA3 Expression im Spross von A. halleri wieder. Es wird vermutet, dass andere Faktoren die konstitutiv hohe Expression ermöglichen wie zum Beispiel die gefundenen kopiespezifischen Sequenzinsertionen innerhalb des ersten AhHMA3-1 Introns. Weiterhin ist es denkbar, dass der unbekannte Promoter der AhHMA3-3 Genkopie die Quelle der konstitutiv hohen AhHMA3 Transkriptmengen ist. In diesem Fall wird eine sehr hohe Ähnlichkeit zwischen den Sequenzen von AhHMA3-3 und der AhHMA3-1 vorhergesagt. Es konnten keine deutlichen Ergebnisse zur intrazellulären Lokalisierung gemacht werden, die eine exakte Einordnung der Funktion des AhHMA3 Proteins erlauben würden. Die bisher ermittelten Ergebnisse schlagen jedoch mehrere mögliche Funktionen für AhHMA3 vor: Ähnlich den AhHMA3 homologen Proteinen, AtHMA2 und AtHMA4, könnte AhHMA3 in der Plasmamembran der Zelle sitzen und dort zur effizienten Translokation von Zink aus der Wurzel in den Spross und/oder zur Zell-zu-Zell Verteilung von Zn im Spross beitragen. Falls AhHMA3 in der Membran der Vakuole sitzt, könnte es eine Rolle bei der Aufrechterhaltung niedriger zytoplasmatischer Zinkkonzentrationen durch vakuoläre Zinksequestrierung spielen. Zusätzlich ist es denkbar, dass AhHMA3 an der Abgabe von Zinkionen an Trichome und Blattmesophyllzellen beteiligt ist, die die Haupteinlagerungsorte für Zink in A. halleri darstellen. KW - P-Typ ATPase KW - Übergangsmetalle KW - Hyperakkumulation KW - Zink KW - HMA KW - p-type ATPase KW - transition metals KW - hyperaccumulation KW - zinc KW - HMA Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15259 ER - TY - THES A1 - Miteva, Rositsa Stoycheva T1 - Electron acceleration at localized wave structures in the solar corona T1 - Elektronenbeschleunigung an lokalen Wellenstrukturen in der Sonnenkorona N2 - Our dynamic Sun manifests its activity by different phenomena: from the 11-year cyclic sunspot pattern to the unpredictable and violent explosions in the case of solar flares. During flares, a huge amount of the stored magnetic energy is suddenly released and a substantial part of this energy is carried by the energetic electrons, considered to be the source of the nonthermal radio and X-ray radiation. One of the most important and still open question in solar physics is how the electrons are accelerated up to high energies within (the observed in the radio emission) short time scales. Because the acceleration site is extremely small in spatial extent as well (compared to the solar radius), the electron acceleration is regarded as a local process. The search for localized wave structures in the solar corona that are able to accelerate electrons together with the theoretical and numerical description of the conditions and requirements for this process, is the aim of the dissertation. Two models of electron acceleration in the solar corona are proposed in the dissertation: I. Electron acceleration due to the solar jet interaction with the background coronal plasma (the jet--plasma interaction) A jet is formed when the newly reconnected and highly curved magnetic field lines are relaxed by shooting plasma away from the reconnection site. Such jets, as observed in soft X-rays with the Yohkoh satellite, are spatially and temporally associated with beams of nonthermal electrons (in terms of the so-called type III metric radio bursts) propagating through the corona. A model that attempts to give an explanation for such observational facts is developed here. Initially, the interaction of such jets with the background plasma leads to an (ion-acoustic) instability associated with growing of electrostatic fluctuations in time for certain range of the jet initial velocity. During this process, any test electron that happen to feel this electrostatic wave field is drawn to co-move with the wave, gaining energy from it. When the jet speed has a value greater or lower than the one, required by the instability range, such wave excitation cannot be sustained and the process of electron energization (acceleration and/or heating) ceases. Hence, the electrons can propagate further in the corona and be detected as type III radio burst, for example. II. Electron acceleration due to attached whistler waves in the upstream region of coronal shocks (the electron--whistler--shock interaction) Coronal shocks are also able to accelerate electrons, as observed by the so-called type II metric radio bursts (the radio signature of a shock wave in the corona). From in-situ observations in space, e.g., at shocks related to co-rotating interaction regions, it is known that nonthermal electrons are produced preferably at shocks with attached whistler wave packets in their upstream regions. Motivated by these observations and assuming that the physical processes at shocks are the same in the corona as in the interplanetary medium, a new model of electron acceleration at coronal shocks is presented in the dissertation, where the electrons are accelerated by their interaction with such whistlers. The protons inflowing toward the shock are reflected there by nearly conserving their magnetic moment, so that they get a substantial velocity gain in the case of a quasi-perpendicular shock geometry, i.e, the angle between the shock normal and the upstream magnetic field is in the range 50--80 degrees. The so-accelerated protons are able to excite whistler waves in a certain frequency range in the upstream region. When these whistlers (comprising the localized wave structure in this case) are formed, only the incoming electrons are now able to interact resonantly with them. But only a part of these electrons fulfill the the electron--whistler wave resonance condition. Due to such resonant interaction (i.e., of these electrons with the whistlers), the electrons are accelerated in the electric and magnetic wave field within just several whistler periods. While gaining energy from the whistler wave field, the electrons reach the shock front and, subsequently, a major part of them are reflected back into the upstream region, since the shock accompanied with a jump of the magnetic field acts as a magnetic mirror. Co-moving with the whistlers now, the reflected electrons are out of resonance and hence can propagate undisturbed into the far upstream region, where they are detected in terms of type II metric radio bursts. In summary, the kinetic energy of protons is transfered into electrons by the action of localized wave structures in both cases, i.e., at jets outflowing from the magnetic reconnection site and at shock waves in the corona. N2 - Die Sonne ist ein aktiver Stern, was sich nicht nur in den allseits bekannten Sonnenflecken, sondern auch in Flares manifestiert. Während Flares wird eine große Menge gespeicherter, magnetischer Energie in einer kurzen Zeit von einigen Sekunden bis zu wenigen Stunden in der Sonnenkorona freigesetzt. Dabei werden u.a. energiereiche Elektronen erzeugt, die ihrerseits nichtthermische Radio- und Röntgenstrahlung, wie sie z.B. am Observatorium für solare Radioastronomie des Astrophysikalischen Instituts Potsdam (AIP) in Tremsdorf und durch den NASA-Satelliten RHESSI beobachtet werden, erzeugen. Da diese Elektronen einen beträchtlichen Anteil der beim Flare freigesetzten Energie tragen, ist die Frage, wie Elektronen in kurzer Zeit auf hohe Energien in der Sonnenkorona beschleunigt werden, von generellem astrophysikalischen Interesse, da solche Prozesse auch in anderen Sternatmosphären und kosmischen Objekten, wie z.B. Supernova-Überresten, stattfinden. In der vorliegenden Dissertation wird die Elektronenbeschleunigung an lokalen Wellenstrukturen im Plasma der Sonnenkorona untersucht. Solche Wellen treten in der Umgebung der magnetischen Rekonnektion, die als ein wichtiger Auslöser von Flares angesehen wird, und in der Nähe von Stoßwellen, die infolge von Flares erzeugt werden, auf. Generell werden die Elektronen als Testteilchen behandelt. Sie werden durch ihre Wechselwirkung mit den elektrischen und magnetischen Feldern, die mit den Plasmawellen verbunden sind, beschleunigt. Infolge der magnetischen Rekonnektion als Grundlage des Flares werden starke Plasmaströmungen (sogenannte Jets) erzeugt. Solche Jets werden im Licht der weichen Röntgenstrahlung, wie z.B. durch den japanischen Satelliten YOHKOH, beobachtet. Mit solchen Jets sind solare Typ III Radiobursts als Signaturen von energiereichen Elektronenstrahlen in der Sonnenkorona verbunden. Durch die Wechselwirkung eines Jets mit dem umgebenden Plasma werden lokal elektrische Felder erzeugt, die ihrerseits Elektronen beschleunigen können. Dieses hier vorgestellte Szenarium kann sehr gut die Röntgen- und Radiobeobachtungen von Jets und den damit verbundenen Elektronenstrahlen erklären. An koronalen Stoßwellen, die infolge Flares entstehen, werden Elektronen beschleunigt, deren Signatur man in der solaren Radiostrahlung in Form von sogenannten Typ II Bursts beobachten kann. Stoßwellen in kosmischen Plasmen können mit Whistlerwellen (ein spezieller Typ von Plasmawellen) verbunden sein. In der vorliegenden Arbeit wird ein Szenarium vorgestellt, das aufzeigt, wie solche Whistlerwellen an koronalen Stoßwellen erzeugt werden und durch ihre resonante Wechselwirkung mit den Elektronen dieselben beschleunigen. Dieser Prozess ist effizienter als bisher vorgeschlagene Mechanismen und kann deshalb auch auf andere Stoßwellen im Kosmos, wie z.B. an Supernova-Überresten, zur Erklärung der dort erzeugten Radio- und Röntgenstrahlung dienen. KW - Elektronenbeschleunigung KW - Sonnenkorona KW - Jets KW - Stoßwellen KW - Nichtlineare Wellen KW - Electron acceleration KW - Solar corona KW - Jets KW - Shock waves KW - Nonlinear waves Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-14775 ER - TY - THES A1 - Nerlich, Annika T1 - Die Rolle der Phosphatidylserin Decarboxylase für die mitochondriale Phospholipid-Biosynthese in Arabidopsis thaliana T1 - Role of phosphatidylserine decarboxylase in mitochondrial phospholipid biosynthesis of Arabidopsis thaliana N2 - Die durch Phosphatidylserin Decarboxylase (PSD) katalysierte Decarboxylierung von Phosphatidylserin (PS) zu Phosphatidylethanolamin (PE) ist für Mitochondrien in Hefe und Mäusen von essentieller Bedeutung. Im Rahmen der vorliegenden Dissertation wurde erstmals die Rolle dieses PE-Syntheseweges in Pflanzen untersucht. Die drei in Arabidopsis identifizierten PSD Gene atPSD1, atPSD2, atPSD3 codieren für Enzyme, die in Membranen der Mitochondrien (atPSD1), der Tonoplasten (atPSD2) und des Endoplasmatischen Retikulums (atPSD3) lokalisiert sind. Der Beitrag der einzelnen PSDs zur PE-Synthese wurde anhand von psd Null-Mutanten untersucht. Dabei stellte sich atPSD3 als das Enzym mit der höchsten Aktivität heraus. Alternativ zum PSD-Weg wird in Arabidopsis PE auch mittels Aminoalkohol-phosphotransferase synthetisiert. Der Verlust der gesamten PSD-Aktivität, wie es in der erzeugten psd Dreifachmutante der Fall ist, wirkt sich ausschließlich auf die Lipidzusammensetzung in der Mitochondrienmembran aus. Demzufolge wird extramitochondriales PE hauptsächlich über die Aminoalkoholphosphotransferase synthetisiert. Die veränderte Lipidzusammensetzung der Mitochondrienmembran hatte jedoch keinen Einfluss auf die Anzahl, Größe und Ultrastruktur der Mitochondrien sowie auf das ADP/ATP-Verhältnis und die Respiration. Neben der Bereitstellung von Reduktionsäquivalenten beeinflusst die Funktionalität der Mitochondrien auch die Bildung von Blüten- und Staubblättern. Diese Blütenorgane waren in der psd Dreifachmutante stark verändert, und der Blütenphänotyp ähnelte der APETALA3-Mutante. Dieses homöotische Gen ist für die Ausbildung von Blüten- und Staubblättern verantwortlich. Für die Erzeugung der Mutanten psd2-1 und psd3-1 wurde ein T-DNA Vektor verwendet, der den Promotor des APETALA3 Gens enthielt, welcher in den Mutanten psd2-1, psd3-1 sowie psd2-1psd3-1 und der psd1psd2-1psd3-1 Dreifachmutante eine vergleichbare Co-Suppression des APETALA3 Gens hervorruft. Der Blütenphänotyp trat jedoch nur in der psd Dreifachmutante auf, da nur in ihr die Kombination von geringen Funktionstörungen der Mitochondrien, hervorgerufen durch veränderte Lipidzusammensetzung, mit der Co-Suppression von APETALA3 auftritt. N2 - Decarboxylation of phosphatidylserine (PS) to form phosphatidylethanolamine (PE) catalyzed by phosphatidylserine decarboxylase (PSD) is an essential reaction for mitochondria in yeast and mice. This dissertation describes the role of this biosynthesis pathway in plants for the first time. Three PSD genes were identified in Arabidopsis, atPSD1, atPSD2, atPSD3. The gene products localize to mitochondria (atPSD1), tonoplast (atPSD2) and endoplasmatic retikulum (atPSD3). Contribution to PE-synthesis of each PSD was analyzed using T-DNA insertion mutants. Thereby, atPSD3 was found to be the most active isoform. Alternatively, PE is also synthesized by the action of aminoalcohol phosphotransferase. Complete loss of PSD activity, like in the psd triple mutant, resulted in changes in lipid composition of mitochondria membranes exclusively. In conclusion the bulk of PE is synthesized by aminoalcohol phosphotransferase. Changed lipid composition of mitochondria did not result in changes of mitochondria number, structure, ADP/ATP ratio and respiration. Mitochondria functionality was formerly shown to effect formation of petals and stamens. These flower organs were drastically morphologically changed in psd triple mutants and showed strong similarities to APETALA3 mutants. APETALA3 is a homeotic gene responsible for specifying petals and stamens. Mutants psd2-1 and psd3-1 used for crossing psd double and triple mutants contained a T-DNA vector which include the promoter for APETALA3. This promoter caused co-suppression of the endogenous APETALA3 gene in all mutants isolated from the Arabidopsis Knockout Facility, whereas changed flower morphology occurred only in the triple mutant concluding a combined effect of co-suppression and a reduced functionality of mitochondria, caused by changed lipid composition. KW - Phospholipide KW - Phosphatidylserin Decarboxylase KW - Phosphatidylserin KW - Phosphatidylethanolamin KW - Mitochondrien KW - phospholipids KW - phosphatidylserine decarboxylase KW - phosphatidylserine KW - phosphatidylethanolamine KW - mitochondria Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-14522 ER - TY - THES A1 - Rust, Henning T1 - Detection of long-range dependence : applications in climatology and hydrology T1 - Detektion langreichweitiger Korrelationen : Anwendungen in Klimatologie und Hydrologie N2 - It is desirable to reduce the potential threats that result from the variability of nature, such as droughts or heat waves that lead to food shortage, or the other extreme, floods that lead to severe damage. To prevent such catastrophic events, it is necessary to understand, and to be capable of characterising, nature's variability. Typically one aims to describe the underlying dynamics of geophysical records with differential equations. There are, however, situations where this does not support the objectives, or is not feasible, e.g., when little is known about the system, or it is too complex for the model parameters to be identified. In such situations it is beneficial to regard certain influences as random, and describe them with stochastic processes. In this thesis I focus on such a description with linear stochastic processes of the FARIMA type and concentrate on the detection of long-range dependence. Long-range dependent processes show an algebraic (i.e. slow) decay of the autocorrelation function. Detection of the latter is important with respect to, e.g. trend tests and uncertainty analysis. Aiming to provide a reliable and powerful strategy for the detection of long-range dependence, I suggest a way of addressing the problem which is somewhat different from standard approaches. Commonly used methods are based either on investigating the asymptotic behaviour (e.g., log-periodogram regression), or on finding a suitable potentially long-range dependent model (e.g., FARIMA[p,d,q]) and test the fractional difference parameter d for compatibility with zero. Here, I suggest to rephrase the problem as a model selection task, i.e.comparing the most suitable long-range dependent and the most suitable short-range dependent model. Approaching the task this way requires a) a suitable class of long-range and short-range dependent models along with suitable means for parameter estimation and b) a reliable model selection strategy, capable of discriminating also non-nested models. With the flexible FARIMA model class together with the Whittle estimator the first requirement is fulfilled. Standard model selection strategies, e.g., the likelihood-ratio test, is for a comparison of non-nested models frequently not powerful enough. Thus, I suggest to extend this strategy with a simulation based model selection approach suitable for such a direct comparison. The approach follows the procedure of a statistical test, with the likelihood-ratio as the test statistic. Its distribution is obtained via simulations using the two models under consideration. For two simple models and different parameter values, I investigate the reliability of p-value and power estimates obtained from the simulated distributions. The result turned out to be dependent on the model parameters. However, in many cases the estimates allow an adequate model selection to be established. An important feature of this approach is that it immediately reveals the ability or inability to discriminate between the two models under consideration. Two applications, a trend detection problem in temperature records and an uncertainty analysis for flood return level estimation, accentuate the importance of having reliable methods at hand for the detection of long-range dependence. In the case of trend detection, falsely concluding long-range dependence implies an underestimation of a trend and possibly leads to a delay of measures needed to take in order to counteract the trend. Ignoring long-range dependence, although present, leads to an underestimation of confidence intervals and thus to an unjustified belief in safety, as it is the case for the return level uncertainty analysis. A reliable detection of long-range dependence is thus highly relevant in practical applications. Examples related to extreme value analysis are not limited to hydrological applications. The increased uncertainty of return level estimates is a potentially problem for all records from autocorrelated processes, an interesting examples in this respect is the assessment of the maximum strength of wind gusts, which is important for designing wind turbines. The detection of long-range dependence is also a relevant problem in the exploration of financial market volatility. With rephrasing the detection problem as a model selection task and suggesting refined methods for model comparison, this thesis contributes to the discussion on and development of methods for the detection of long-range dependence. N2 - Die potentiellen Gefahren und Auswirkungen der natürlicher Klimavariabilitäten zu reduzieren ist ein wünschenswertes Ziel. Solche Gefahren sind etwa Dürren und Hitzewellen, die zu Wasserknappheit führen oder, das andere Extrem, Überflutungen, die einen erheblichen Schaden an der Infrastruktur nach sich ziehen können. Um solche katastrophalen Ereignisse zu vermeiden, ist es notwendig die Dynamik der Natur zu verstehen und beschreiben zu können. Typischerweise wird versucht die Dynamik geophysikalischer Datenreihen mit Differentialgleichungssystemen zu beschreiben. Es gibt allerdings Situationen in denen dieses Vorgehen nicht zielführend oder technisch nicht möglich ist. Dieses sind Situationen in denen wenig Wissen über das System vorliegt oder es zu komplex ist um die Modellparameter zu identifizieren. Hier ist es sinnvoll einige Einflüsse als zufällig zu betrachten und mit Hilfe stochastischer Prozesse zu modellieren. In dieser Arbeit wird eine solche Beschreibung mit linearen stochastischen Prozessen der FARIMA-Klasse angestrebt. Besonderer Fokus liegt auf der Detektion von langreichweitigen Korrelationen. Langreichweitig korrelierte Prozesse sind solche mit einer algebraisch, d.h. langsam, abfallenden Autokorrelationsfunktion. Eine verläßliche Erkennung dieser Prozesse ist relevant für Trenddetektion und Unsicherheitsanalysen. Um eine verläßliche Strategie für die Detektion langreichweitig korrelierter Prozesse zur Verfügung zu stellen, wird in der Arbeit ein anderer als der Standardweg vorgeschlagen. Gewöhnlich werden Methoden eingesetzt, die das asymptotische Verhalten untersuchen, z.B. Regression im Periodogramm. Oder aber es wird versucht ein passendes potentiell langreichweitig korreliertes Modell zu finden, z.B. aus der FARIMA Klasse, und den geschätzten fraktionalen Differenzierungsparameter d auf Verträglichkeit mit dem trivialen Wert Null zu testen. In der Arbeit wird vorgeschlagen das Problem der Detektion langreichweitiger Korrelationen als Modellselektionsproblem umzuformulieren, d.h. das beste kurzreichweitig und das beste langreichweitig korrelierte Modell zu vergleichen. Diese Herangehensweise erfordert a) eine geeignete Klasse von lang- und kurzreichweitig korrelierten Prozessen und b) eine verläßliche Modellselektionsstrategie, auch für nichtgenestete Modelle. Mit der flexiblen FARIMA-Klasse und dem Whittleschen Ansatz zur Parameterschätzung ist die erste Voraussetzung erfüllt. Hingegen sind standard Ansätze zur Modellselektion, wie z.B. der Likelihood-Ratio-Test, für nichtgenestete Modelle oft nicht trennscharf genug. Es wird daher vorgeschlagen diese Strategie mit einem simulationsbasierten Ansatz zu ergänzen, der insbesondere für die direkte Diskriminierung nichtgenesteter Modelle geeignet ist. Der Ansatz folgt einem statistischen Test mit dem Quotienten der Likelihood als Teststatistik. Ihre Verteilung wird über Simulationen mit den beiden zu unterscheidenden Modellen ermittelt. Für zwei einfache Modelle und verschiedene Parameterwerte wird die Verläßlichkeit der Schätzungen für p-Wert und Power untersucht. Das Ergebnis hängt von den Modellparametern ab. Es konnte jedoch in vielen Fällen eine adäquate Modellselektion etabliert werden. Ein wichtige Eigenschaft dieser Strategie ist, dass unmittelbar offengelegt wird, wie gut sich die betrachteten Modelle unterscheiden lassen. Zwei Anwendungen, die Trenddetektion in Temperaturzeitreihen und die Unsicherheitsanalyse für Bemessungshochwasser, betonen den Bedarf an verläßlichen Methoden für die Detektion langreichweitiger Korrelationen. Im Falle der Trenddetektion führt ein fälschlicherweise gezogener Schluß auf langreichweitige Korrelationen zu einer Unterschätzung eines Trends, was wiederum zu einer möglicherweise verzögerten Einleitung von Maßnahmen führt, die diesem entgegenwirken sollen. Im Fall von Abflußzeitreihen führt die Nichtbeachtung von vorliegenden langreichweitigen Korrelationen zu einer Unterschätzung der Unsicherheit von Bemessungsgrößen. Eine verläßliche Detektion von langreichweitig Korrelierten Prozesse ist somit von hoher Bedeutung in der praktischen Zeitreihenanalyse. Beispiele mit Bezug zu extremem Ereignissen beschränken sich nicht nur auf die Hochwasseranalyse. Eine erhöhte Unsicherheit in der Bestimmung von extremen Ereignissen ist ein potentielles Problem von allen autokorrelierten Prozessen. Ein weiteres interessantes Beispiel ist hier die Abschätzung von maximalen Windstärken in Böen, welche bei der Konstruktion von Windrädern eine Rolle spielt. Mit der Umformulierung des Detektionsproblems als Modellselektionsfrage und mit der Bereitstellung geeigneter Modellselektionsstrategie trägt diese Arbeit zur Diskussion und Entwicklung von Methoden im Bereich der Detektion von langreichweitigen Korrelationen bei. KW - langreichweitige Korrelationen KW - nichtgenestete Modellselektion KW - FARIMA KW - Unsicherheitsanalyse KW - Bemessungshochwasser KW - long-range dependence KW - long-memory KW - non-nested model selection KW - FARIMA KW - uncertainty analysis KW - return level estimation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13347 ER - TY - THES A1 - Demircioglu, Aydin T1 - Reconstruction of deligne classes and cocycles T1 - Rekonstruktion von Deligne Klassen und Kozykeln N2 - In der vorliegenden Arbeit verallgemeinern wir im Wesentlichen zwei Theoreme von Mackaay-Picken und Picken (2002, 2004). Im ihrem Artikel zeigen Mackaay und Picken,dass es eine bijektive Korrespodenz zwischen Deligne 2-Klassen $\xi \in \check{H}^2(M, \mathcal{D}^2)$ und Holonomie Abbildungen von der zweiten dünnen Homotopiegruppe $\pi_2^2(M)$ in die abelsche Gruppe $U(1)$ gibt. Im zweiten Artikel wird eine Verallgemeinerung dieses Theorems bewiesen: Picken zeigt, dass es eine Bijektion gibt zwischen Deligne 2-Kozykeln und gewissen 2-dimensionalen topologischen Quantenfeldtheorien. In dieser Arbeit zeigen wir, dass diese beiden Theoreme in allen Dimensionen gelten.Wir betrachten zunächst den Holonomie Fall und können mittels simplizialen Methoden nachweisen, dass die Gruppe der glatten Deligne $d$-Klassen isomorph ist zu der Gruppe der glatten Holonomie Abbildungen von der $d$-ten dünnen Homotopiegruppe $\pi_d^d(M)$ nach $U(1)$, sofern $M$ eine $(d-1)$-zusammenhängende Mannigfaltigkeit ist. Wir vergleichen dieses Resultat mit einem Satz von Gajer (1999). Gajer zeigte, dass jede Deligne $d$-Klasse durch eine andere Klasse von Holonomie-Abbildungen rekonstruiert werden kann, die aber nicht nur Holonomien entlang von Sphären, sondern auch entlang von allgemeinen $d$-Mannigfaltigkeiten in $M$ enthält. Dieser Zugang benötigt dann aber nicht, dass $M$ hoch-zusammenhängend ist. Wir zeigen, dass im Falle von flachen Deligne $d$-Klassen unser Rekonstruktionstheorem sich von Gajers unterscheidet, sofern $M$ nicht als $(d-1)$, sondern nur als $(d-2)$-zusammenhängend angenommen wird. Stiefel Mannigfaltigkeiten besitzen genau diese Eigenschaft, und wendet man unser Theorem auf diese an und vergleicht das Resultat mit dem von Gajer, so zeigt sich, dass es zuviele Deligne Klassen rekonstruiert. Dies bedeutet, dass unser Rekonstruktionsthreorem ohne die Zusatzbedingungen an die Mannigfaltigkeit M nicht auskommt, d.h. unsere Rekonstruktion benötigt zwar weniger Informationen über die Holonomie entlang von d-dimensionalen Mannigfaltigkeiten, aber dafür muss M auch $(d-1)$-zusammenhängend angenommen werden. Wir zeigen dann, dass auch das zweite Theorem verallgemeinert werden kann: Indem wir das Konzept einer Picken topologischen Quantenfeldtheorie in beliebigen Dimensionen einführen, können wir nachweisen, dass jeder Deligne $d$-Kozykel eine solche $d$-dimensionale Feldtheorie mit zwei besonderen Eigenschaften, der dünnen Invarianz und der Glattheit, induziert. Wir beweisen, dass jede $d$-dimensionale topologische Quantenfeldtheorie nach Picken mit diesen zwei Eigenschaften auch eine Deligne $d$-Klasse definiert und prüfen nach, dass diese Konstruktion sowohl surjektiv als auch injektiv ist. Demzufolge sind beide Gruppen isomorph. N2 - In this thesis we mainly generalize two theorems from Mackaay-Picken and Picken (2002, 2004). In the first paper, Mackaay and Picken show that there is a bijective correspondence between Deligne 2-classes $\xi \in \check{H}^2(M,\mathcal{D}^2)$ and holonomy maps from the second thin-homotopy group $\pi_2^2(M)$ to $U(1)$. In the second one, a generalization of this theorem to manifolds with boundaries is given: Picken shows that there is a bijection between Deligne 2-cocycles and a certain variant of 2-dimensional topological quantum field theories. In this thesis we show that these two theorems hold in every dimension. We consider first the holonomy case, and by using simplicial methods we can prove that the group of smooth Deligne $d$-classes is isomorphic to the group of smooth holonomy maps from the $d^{th}$ thin-homotopy group $\pi_d^d(M)$ to $U(1)$, if $M$ is $(d-1)$-connected. We contrast this with a result of Gajer (1999). Gajer showed that Deligne $d$-classes can be reconstructed by a different class of holonomy maps, which not only include holonomies along spheres, but also along general $d$-manifolds in $M$. This approach does not require the manifold $M$ to be $(d-1)$-connected. We show that in the case of flat Deligne $d$-classes, our result differs from Gajers, if $M$ is not $(d-1)$-connected, but only $(d-2)$-connected. Stiefel manifolds do have this property, and if one applies our theorem to these and compare the result with that of Gajers theorem, it is revealed that our theorem reconstructs too many Deligne classes. This means, that our reconstruction theorem cannot live without the extra assumption on the manifold $M$, that is our reconstruction needs less informations about the holonomy of $d$-manifolds in $M$ at the price of assuming $M$ to be $(d-1)$-connected. We continue to show, that also the second theorem can be generalized: By introducing the concept of Picken-type topological quantum field theory in arbitrary dimensions, we can show that every Deligne $d$-cocycle induces such a $d$-dimensional field theory with two special properties, namely thin-invariance and smoothness. We show that any $d$-dimensional topological quantum field theory with these two properties gives rise to a Deligne $d$-cocycle and verify that this construction is surjective and injective, that is both groups are isomorphic. KW - Holonomie KW - Hauptfaserbündel KW - Gerben KW - Deligne Kohomologie KW - Globale Differentialgeometrie KW - Holonomy KW - Prinicipal Fibre Bundles KW - Gerbes KW - Deligne Cohomology KW - Global Differentialgeometry Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13755 ER - TY - THES A1 - Senger, Toralf T1 - Untersuchungen zur Metallhomöostase in Arabidopsis thaliana T1 - Investigations to study metal homeostasis in Arabidopsis thaliana N2 - Alle Organismen sind für ihr Überleben auf Metalle angewiesen. Hierbei gibt es für jedes Metall einen Konzentrationsbereich, der das Optimum zwischen Metallmangel, -bedarf und -toxizität darstellt. Es gilt mittlerweile als erwiesen, dass alle Organismen zur Aufrechterhaltung des Metallgleichgewichts ein komplexes Netzwerk von Proteinen und niedermolekularen Verbindungen entwickelt haben. Die molekularen Komponenten dieses Netzwerks sind nur zu einem Teil bekannt und charakterisiert: In den letzten Jahren wurden einige Proteinfamilien identifiziert, deren Mitglieder Metalle durch Lipidmembranen transportieren. Eine dieser Metalltransporterfamilien ist die Cation Diffusion Facilitator (CDF)-Familie: Alle charakterisierten Mitglieder exportieren Metalle aus dem Zytoplasma – entweder in zelluläre Kompartimente oder aus der Zelle heraus. Von den zwölf Mitgliedern dieser Familie in Arabidopsis thaliana (A. thaliana) – Metall Toleranz Protein (MTP)-1 bis -12 – wurden bisher AtMTP1 und AtMTP3 charakterisiert. In dieser Arbeit wird die Charakterisierung von AtMTP2 beschrieben. Wie die homologen Proteine AtMTP1 und AtMTP3 führt AtMTP2 zu Zn-Toleranz, wenn es heterolog in Zn-sensitiven Hefemutanten exprimiert wird. Mit AtMTP2 transformierte Hefemutanten zeigten darüber hinaus erhöhte Co-Toleranz. Expression von chimären AtMTP2/GFP Fusionsproteinen in Hefe, A.thaliana protoplasten und in stabil transformierten A.thalinana Planzenlinien deutet auf Lokalisation of AtMTP2 in Membranen des Endoplasmatischen Retikulums (ER) hin, wenn GFP an den C-Terminus von MTP2 fusioniert wird. Fusion of GFP an den N-Terminus von AtMTP2 führte zu Lokalisation in der vakuolären Membran, was wahrscheinlichsten auf Fehllokalisierung durch Maskierung eines ER-Retentionsmotivs (XXRR) am N-Terminus von AtMTP2 zurückgeht. Dies legt nahe, dass AtMTP2 die erwähnten Metalle in das Endomembransystem der Zelle transportieren kann. Eine gewebespezifische Lokalisierung wurde mit Pflanzen durchgeführt, die das β-Glucuronidase (GUS)-Reporterprotein bzw. chimäre Fusionsproteine aus EGFP und AtMTP2 unter Kontrolle des nativen pMTP2-Promotors exprimierten. Diese Experimente bestätigten zum einen, dass der pMTP2-Promotor nur unter Zn-Defizienz aktiv ist. GUS-Aktivität wurde unter diesen Bedingungen in zwei Zonen der Wurzelspitze beobachtet: in den isodiametrischen Zellen der meristematischen Zone und in der beginnenden Wurzelhaarzone. Darüber hinaus konnte gezeigt werden, dass die EGFP-Fusionsproteine unter Kontrolle des nativen pMTP2-Promotors nur in epidermalen Zellen exprimiert werden. Für eine homozygote Knockout- Linie, mtp2-S3, konnte bisher kein eindeutiger Phänotyp identifiziert werden. Auf Grundlage der bisher durchgeführten Charakterisierung von AtMTP2 erscheinen zwei Modelle der Funktion von AtMTP2 in der Pflanze möglich: AtMTP2 könnte essentiell für die Versorgung des ER mit Zn unter Zn-Mangelbedingungen sein. Hierfür spricht, dass AtMTP2 in jungen, teilungsaktiven und damit Zn-benötigenden Wurzelzonen exprimiert wird. Die auf die Epidermis beschränkte Lokalisation könnte bei diesem Modell auf die Möglichkeit der zwischenzellulären Zn-Verteilung innerhalb des ER über Desmotubules hindeuten. Alternativ könnte AtMTP2 eine Funktion bei der Detoxifizierung von Zn unter Zn-Schock Bedingungen haben: Es ist bekannt, dass unter Zn- Mangelbedingungen die Expression der zellulären Zn-Aufnahmesysteme hochreguliert wird. Wenn nun die Zn-Verfügbarkeit im Boden z. B durch eine pH-Änderung innerhalb kurzer Zeit stark ansteigt, besteht die Notwendigkeit der Entgiftung von Zn innerhalb der Zelle, bis der starke Einstrom von Zn ins Zytoplasma durch die Deaktivierung der Zn-Aufnahmesysteme und einer geringeren Expression in der Pflanze gedrosselt ist. Ein ähnlicher Mechanismus wurde in der Bäckerhefe S. cerevisae beschrieben, in der darüber hinaus ein Zn-Transporter verstärkt exprimiert wird, der Zn durch Transport in die Vakuole entgiften kann. Es ist durchaus möglich, dass in Arabidopsis AtMTP2 die Zn-Detoxifizierung unter diesen speziellen Bedingungen durch Zn-Transport in das ER oder die Vakuole vermittelt. Zur Identifikation weiterer Komponenten des Metallhomöostasenetzwerks sind verschiedene Ansätze denkbar. In dieser Arbeit wurde in Hefe ein heterologer Screen durchgeführt, um Interaktoren für vier Mitglieder der Arabidopsis-CDF-Familie zu identifizieren. Unter den 11 im Hefesystem bestätigten Kandidaten befindet sich mit AtSPL1 ein AtMTP1-Interaktionskandidat, der möglicherweise eine Rolle bei der Cu-,Zn-Homöostase spielt. Als wahrscheinliche AtMTP3-Interaktionskandidaten wurde die c”-Untereinheit der vakuolären H+-ATPase AtVHA identifiziert sowie mit AtNPSN13 ein Protein, das vermutlich eine Rolle bei Fusionen von Vesikeln mit Zielmembranen spielt. Ein anderer Ansatz zur Identifikation neuer Metallhomöostasegene ist die vergleichende Elementanalyse von natürlichen oder mutagenisierten Pflanzenpopulationen. Voraussetzung für diesen Ansatz ist die schnelle und genaue Analyse des Elementgehalts von Pflanzen. Eine etablierte Methode zur simultanen Bestimmung von bis zu 65 Elementen in einer Probe ist die Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). Der limitierende Faktor für einen hohen Probendurchsatz ist die Notwendigkeit, Proben für die Analyse zu verflüssigen. Eine alternative Methode der Probenzuführung zum Analysegerät ist die elektrothermale Verdampfung (ETV) der Probe. Zur weitgehend automatisierten Analyse von Pflanzenmaterial mit minimiertem Arbeitsaufwand wurde eine Methode entwickelt, die auf der Kopplung der ETV mit der ICP OES basiert. N2 - All organisms require for their survival essential metals. For each required metal exists an optimal concentration between metal deficiency and -toxicity. It has become evident that all organisms developed a complex network of proteins and low molecular compounds to maintain the equilibrium between all metals. Only few molecular components of this metal-homeostasis network are characterized in detail: A number of protein families whose members transport metals over the barrier of lipid-membranes have been identified during the last couple of years. One of those metal-transport families is the Cation Diffusion Facilitator (CDF) family. All characterized members export metals from the cytoplasm – either into cellular compartments or outside the cell. From the 12 Arabidopsis thaliana (A.thaliana) members – Metal Tolerance Protein (MTP)-1 to 1-2 – only MTP1 and MTP3 have been characterized yet. In this work, characterization of MTP2 is described. As was found for the homologous proteins AtMTP1 and AtMTP3, heterologous expression of AtMTP2 in Zn-sensitive yeast mutants leads to enhanced Zn-tolerance. Less pronounced, enhanced tolerance was also found for Co when AtMTP2 was expressed in Co sensitive yeast mutants. Expression of chimeric AtMTP2/GFP fusion proteins in yeast, A.thaliana protoplasts and in stably transformed A.thalinana plant lines indicated localization of MTP2 in membranes of the endoplasmic reticulum, when GFP was fused to the C-terminal end of MTP2. Fusion of GFP to the N-terminal end of MTP2 lead to vacuolar localization that is most likely explained as mistargeting due to masking of an ER retrieval motive (XXRR) found at the N-terminus of MTP2. This suggests that AtMTP2 mediates the transport of Zn and Co into the endomembrane system of the cell. Tissue specific localization was performed with plant lines expressing the β-Glucuronidase (GUS) reporter protein and with plant lines expressing chimeric fusions of GFP with AtMTP2 under control of the native pMTP2 promoter. Those experiments confirmed Affymetrix Genechip® data suggesting activity of the pMTP2 promoter only under Zn-deficiency. GUS activity was only found under Zn-deficiency in two zone of root tips – the meristematic zone, characterized by isodiamtric cells, and in the beginning differentiation zone, characterized by appearing root hairs. Confocal microscopy with plant lines expressing chimeric MTP2 /GFP fusions demonstrated that expression of AtMTP2 is restricted to epidermal cells. A phenotype for the homozygous mtp2-S3 knockout mutant could not be identified yet. Based on the data obtained as yet , two mode of action of AtMTP2 in planta seam likely: AtMTP2 could be essential for delivery of Zn to the ER under Zn-deficiency. This is supported by the fact, that AtMTP2 is active in young, dividing (and therefore Zn-requiring) zones of the root. The epidermal-restricted expression of AtMTP2 points towards a distribution of Zn in these root zones of Zn within desmotubules. Alternatively, AtMTP2 could have a Zn-detoxifying function under Zn-shock. It is known that in yeast under Zn-deficiency not only the expression of an Zn-uptake transporter is up-regulated, but also the expression of a vacuolar Zn-transporter. It mediates Zn-detoxification of surplus Zn that enters cells upon Zn-resupply before shut down of the Zn uptake system. AtMTP2 could exert this function when soil Zn-availability raises suddenly, for example due to rain after a drought. Different means/methods are perceivable to identify further components of the metal homeostasis network. In this work, a heterologuos screen was performed in yeast to identify interacting proteins for four members of the Arabidopsis CDF-family. Among 11 candidates identified and confirmed in the Split Ubiquitin System (SUS, a Yeast-2-Hybrid variant) is with AtSPL1 an AtMTP1 interaction candidate, which plays putatively a role in Zn,Cu homoestasis. The c” subunit of the vacuolar H+-ATPase AtVHA was found as likely AtMTP3-interaction candidate, as well as AtNPSN13, an protein that plays putatively a role in fusion of vesicles with target-membranes. Another method to identify new metal homeostasis genes is the comparative elemental analysis of natural and mutagenized plant populations. Prerequisite for this approach is the fast and accurate analysis of the elemental composition of plants. An established method for elemental analysis is Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). The limiting factor for high thoughput is the requirement for laborious wet digest of plant samples before analysis. An alternative mean of sample delivery to the ICP OES is electrothermal vaporization (ETV). For faster, less laborious analysis of plant material, a method based on the established coupling of ETV with ICP OES was developed, which is optimized for plant material and automated as far as possible. KW - CDF KW - MTP KW - MTP1 KW - MTP2 KW - MTP3 KW - Interaktoren KW - Split Ubiquitin KW - ETV KW - ICP OES KW - CDF KW - MTP KW - MTP1 KW - MTP2 KW - MTP3 KW - Interactors KW - Split Ubiquitin KW - ETV KW - ICP OES Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13234 ER - TY - THES A1 - Weber, Jens T1 - Meso- und mikroporöse Hochleistungspolymere : Synthese, Analytik und Anwendungen T1 - Meso- and microporous high performance polymers : synthesis, characterisation and application N2 - Die Arbeit beschreibt die Synthese, Charakterisierung und Anwendung von meso- und mikroporösen Hochleistungspolymeren. Im ersten Teil wird die Synthese von mesoporösen Polybenzimidazol (PBI) auf der Basis einer Templatierungsmethode vorgestellt. Auf der Grundlage kommerzieller Monomere und Silikatnanopartikel sowie eines neuen Vernetzers wurde ein Polymer-Silikat-Hybridmaterial aufgebaut. Das Herauslösen des Silikats mit Ammoniumhydrogendifluorid führt zu mesoporösen Polybenzimidazolen mit spherischen Poren von 9 bis 11 nm Durchmesser. Die Abhängigkeit der beobachteten Porosität vom Massenverhältnis Silikat zu Polymer wurde ebenso untersucht wie die Abhängigkeit der Porosität vom Vernetzergehalt. Die Porosität vollvernetzter Proben zeigt eine lineare Abhängigkeit vom Verhältnis Silikat zu Polymer bis zu einem Grenzwert von 1. Wird der Grenzwert überschritten, ist teilweiser Porenkollaps zu beobachten. Die Abhängigkeit der Porosität vom Vernetzergehalt bei festem Silikatgehalt ist nichtlinear. Oberhalb einer kritischen Vernetzerkonzentration wird eine komplette Replikation der Nanopartikel gefunden. Ist die Vernetzerkonzentration dagegen kleiner als der kritische Wert, so ist der völlige Kollaps einiger Poren bei Stabilität der verbleibenden Poren zu beobachten. Ein komplett unporöses PBI resultiert bei Abwesenheit des Vernetzers. Die mesoporösen PBI-Netzwerke konnten kontrolliert mit Phosphorsäure beladen werden. Die erhaltenen Addukte wurden auf ihre Protonenleitfähigkeit untersucht. Es kann gezeigt werden, dass die Nutzung der vordefinierten Morphologie im Vergleich zu einem unstrukturierten PBI in höheren Leitfähigkeiten resultiert. Durch die vernetzte Struktur war des Weiteren genügend mechanische Stabilität gegeben, um die Addukte reversibel und bei sehr guten Leitfähigkeiten bis zu Temperaturen von 190°C bei 0% relativer Feuchtigkeit zu untersuchen. Dies ist für unstrukturierte Phosphorsäure/PBI - Addukte aus linearem PBI nicht möglich. Im zweiten Teil der Arbeit wird die Synthese intrinsisch mikroporöser Polyamide und Polyimide vorgestellt. Das Konzept intrinsisch mikroporöser Polymere konnte damit auf weitere Polymerklassen ausgeweitet werden. Als zentrales, strukturinduzierendes Motiv wurde 9,9'-Spirobifluoren gewählt. Dieses Molekül ist leicht und vielfältig zu di- bzw. tetrafunktionellen Monomeren modifizierbar. Dabei wurden bestehende Synthesevorschriften modifiziert bzw. neue Vorschriften entwickelt. Ein erster Schwerpunkt innerhalb des Kapitels lag in der Synthese und Charakterisierung von löslichen, intrinsisch mikroporösen, aromatischen Polyamid und Polyimid. Es konnte gezeigt werden, dass das Beobachten von Mikroporosität stark von der molekularen Architektur und der Verarbeitung der Polymere abhängig ist. Die Charakterisierung der Porosität erfolgte unter Nutzung von Stickstoffsorption, Kleinwinkelröntgenstreuung und Molecular Modeling. Es konnte gezeigt werden, dass die Proben stark vom Umgebungsdruck abhängigen Deformationen unterliegen. Die starke Quellung der Proben während des Sorptionsvorgangs konnte durch Anwendung des "dual sorption" Modells, also dem Auftreten von Porenfüllung und dadurch induzierter Henry-Sorption, erklärt werden. Der zweite Schwerpunkt des Kapitels beschreibt die Synthese und Charakterisierung mikroporöser Polyamid- und Polyimidnetzwerke. Während Polyimidnetzwerke auf Spirobifluorenbasis ausgeprägte Mikroporosität und spezifische Oberflächen von ca. 1100 m²/g aufwiesen, war die Situation für entsprechende Polyamidnetzwerke abweichend. Mittels Stickstoffsorption konnte keine Mikroporosität nachgewiesen werden, jedoch konnte mittels SAXS eine innere Grenzfläche von ca. 300 m²/g nachgewiesen werden. Durch die in dieser Arbeit gezeigten Experimente kann die Grenze zwischen Polymeren mit hohem freien Volumen und mikroporösen Polymeren somit etwas genauer gezogen werden. ausgeprägte Mikroporosität kann nur in extrem steifen Strukturen nachgewiesen werden. Die Kombination der Konzepte "Mesoporosität durch Templatierung" und "Mikroporosität durch strukturierte Monomere" hatte ein hierarchisch strukturiertes Polybenzimidazol zum Ergebnis. Die Präsenz einer Strukturierung im molekularen Maßstab konnte SAXS bewiesen werden. Das so strukturierte Polybenzimidazol zeichnete sich durch eine höhere Protonenleitfähigkeit im Vergleich zu einem rein mesoporösen PBI aus. Der letzte Teil der Arbeit beschäftigte sich mit der Entwicklung einer neuen Synthesemethode zur Herstellung von Polybenzimidazol. Es konnte gezeigt werden, dass lineares PBI in einer eutektischen Salzschmelze aus Lithium- und Kaliumchlorid synthetisiert werden kann. Die Umsetzung der spirobifluorenbasierten Monomere zu löslichem oder vernetztem PBI ist in der Salzschmelze möglich. N2 - The first part of the thesis describes the synthesis and characterisation of cross linked, mesoporous poly(benzimidazole) (PBI) prepared by a hard templating approach. Silica nanoparticles were used as template and removed after the polycondensation by immersing the hybrid material in aqueous NH4HF2 solution. The resulting mesoporous PBI showed surface areas up to 200 m²/g as established by N2 BET and porosities up to 37 vol.-%. The influence of the template and cross linker content on the observable porosity was investigated. Nitrogen sorption and small angle x-ray scattering (SAXS) were employed as analytical techniques. The template morphology was reproduced almost perfectly, yielding spherical pores of 11 nm in diameter if the samples were fully cross linked. It was shown that there is a linear dependence of the porosity on the template content up to a critical weight ratio of silica/polymer. If the silica content is raised above 50 wt.-% partial collapse of pores is observed. The dependence of the porosity on the cross linker content at constant amount of template was found to be non-linear. At the absence of any cross linker, no porosity was observed after template removal. At 10 mol-% cross linker the onset of porosity could be observed. At higher cross linker contents, the porosity was nearly the same as for the fully cross linked PBI. The mesoporous PBI could be loaded with crystalline phosphoric acid to yield highly proton conductive materials. It was shown that the material retains its nanostructure when loaded with phosphoric acid even after annealing at 180_C for 12 h. The conductivity of the nanostructured samples was one to two orders of magnitude higher than the conductivity of a nonstructured sample. The impact of the cross linking density on the conductivity was also investigated. The second part of the work describes the synthesis and characterisation of microporous poly(amide)s and poly(imide)s. 9,9'-spirobifluorene derivatives were used to introduce a rigid, structure-directing motif which prevents the polymer chains from close packing. Firstly, the synthesis of soluble poly(amide)s and poly(imide) is described. It was observed that the microporosity is strongly dependent on the processing of the soluble polymers. In the case when polymers were precipitated from solvents of high polarity no microporosity was observed, while polymers prone to solvation in solvents of lower polarity exhibited microporosity as observed in nitrogen sorption measurements. Wide angle x-ray scattering (WAXS) showed that the microstructure was indeed dependent on the processing conditions. SAXS measurements of the polymers revealed that nitrogen sorption alone is not sufficient for the analysis of the porosity. A significant mismatch between the results obtained by the two methods indicated that only a fraction of the pore volume of the polymers was accessible for nitrogen molecules. The second part of the chapter describes the synthesis, characterisation and application of spirobifluorene based, cross linked poly(amide)s and poly(imide)s. The poly(amide) networks did not show any microporosity when analysed by nitrogen sorption. This led to the conclusion that the amide bond is too weak to withstand the interfacial forces. In contrast, poly(imide) networks exhibited pronounced microporosity with surface areas of around 1000 m2/g. The analysis of these networks was again done by nitrogen sorption and SAXS. Furthermore, molecular modelling was used to calculate the true and apparent densities of the networks. In case of the poly(imide) networks, the results of the various measurement techniques were in reasonable agreement. This indicates that the pore volume was nearly completely accessible. Finally it was established that the structure directing motif is necessary to obtain microporous polymers, as a poly(imide) prepared from a spatially undefined monomer did not feature microporosity. Pressure dependent SAXS measurements showed that the polymer networks undergo significant elastic deformations upon evacuation. This behavior complicates the analysis of the nitrogen sorption data, making it impossible to extract reliable pore size distributions. The third and last part of the thesis deals with the development of a new reaction medium for the synthesis of poly(benzimidazole). An eutectic salt melt, composed of lithium chloride and potassium chloride was used in an ionothermal synthesis of linear PBI, opening a green chemistry route towards PBI. The influence of the reaction conditions on the properties of the resulting polymers was investigated. The new reaction medium allowed furthermore the synthesis of linear and cross linked spirobifluorene based PBIs. This is not easily possible by using the classical synthetic pathways towards PBI. The spirobifluorene based PBIs synthesized in this work did, however not feature intrinsic microporosity. KW - poröse Polymere KW - Röntgenkleinwinkelstreuung KW - Gassorption KW - Protonenleitfähigkeit KW - porous polymers KW - small-angle x-ray scattering KW - gas sorption KW - proton conductivity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15994 ER - TY - THES A1 - Adelhelm, Philipp T1 - Novel carbon materials with hierarchical porosity : templating strategies and advanced characterization T1 - Neue Kohlenstoffmaterialien mit hierarchischer Porosität : Strategien der Templatierung und erweiterte Charakterisierung N2 - The aim of this work was the generation of carbon materials with high surface area, exhibiting a hierarchical pore system in the macro- and mesorange. Such a pore system facilitates the transport through the material and enhances the interaction with the carbon matrix (macropores are pores with diameters > 50 nm, mesopores between 2 – 50 nm). Thereto, new strategies for the synthesis of novel carbon materials with designed porosity were developed that are in particular useful for the storage of energy. Besides the porosity, it is the graphene structure itself that determines the properties of a carbon material. Non-graphitic carbon materials usually exhibit a quite large degree of disorder with many defects in the graphene structure, and thus exhibit inherent microporosity (d < 2nm). These pores are traps and oppose reversible interaction with the carbon matrix. Furthermore they reduce the stability and conductivity of the carbon material, which was undesired for the proposed applications. As one part of this work, the graphene structures of different non-graphitic carbon materials were studied in detail using a novel wide-angle x-ray scattering model that allowed precise information about the nature of the carbon building units (graphene stacks). Different carbon precursors were evaluated regarding their potential use for the synthesis shown in this work, whereas mesophase pitch proved to be advantageous when a less disordered carbon microstructure is desired. By using mesophase pitch as carbon precursor, two templating strategies were developed using the nanocasting approach. The synthesized (monolithic) materials combined for the first time the advantages of a hierarchical interconnected pore system in the macro- and mesorange with the advantages of mesophase pitch as carbon precursor. In the first case, hierarchical macro- / mesoporous carbon monoliths were synthesized by replication of hard (silica) templates. Thus, a suitable synthesis procedure was developed that allowed the infiltration of the template with the hardly soluble carbon precursor. In the second case, hierarchical macro- / mesoporous carbon materials were synthesized by a novel soft-templating technique, taking advantage of the phase separation (spinodal decomposition) between mesophase pitch and polystyrene. The synthesis also allowed the generation of monolithic samples and incorporation of functional nanoparticles into the material. The synthesized materials showed excellent properties as an anode material in lithium batteries and support material for supercapacitors. N2 - Kohlenstoffmaterialien finden aufgrund ihrer Vielseitigkeit heute in den unterschiedlichsten Bereichen des täglichen Lebens ihren Einsatz. Bekannte Beispiele sind Kohlenstofffasern in Verbundwerkstoffen, Graphit als trockenes Schmiermittel, oder Aktivkohlen in Filtersystemen. Ferner wird Graphit als Elektrodenmaterial auch in Lithium-Ionen-Batterien verwendet. Wegen knapper werdender Ressourcen von Öl und Gas wurde in den letzten Jahren verstärkt an der Entwicklung neuer Materialien für die Speicherung von Wasserstoff und elektrischer Energie gearbeitet. Die Nanotechnologie ist dabei auch für neue Kohlenstoffmaterialien zukunftsweisend, denn sie stellt weitere Anwendungsmöglichkeiten in Aussicht. In dieser Arbeit wurden hierzu mittels des sogenannten Nanocastings neue Kohlenstoffmaterialien für Energieanwendungen, insbesondere zur Speicherung von elektrischer Energie entwickelt. Die Eigenschaften eines Kohlenstoffmaterials beruhen im Wesentlichen auf der Struktur des Kohlenstoffs im molekularen Bereich. Die in dieser Arbeit hergestellten Materialen bestehen aus nichtgraphitischem Kohlenstoff und wurden im ersten Teil der Arbeit mit den Methoden der Röntgenstreuung genau untersucht. Eine speziell für diese Art von Kohlenstoffen kürzlich entwickelte Modellfunktion wurde dazu an die experimentellen Streubilder angepasst. Das verwendete Modell basiert dabei auf den wesentlichen Strukturmerkmalen von nichtgraphitischem Kohlenstoff und ermöglichte von daher eine detaillierte Beschreibung der Materialien. Im Gegensatz zu den meisten nichtgraphitischen Kohlenstoffen konnte gezeigt werden, dass die Verwendung von Mesophasen-Pech als Vorläufersubstanz (Precursor) ein Material mit vergleichsweise geringem Grad an Unordnung ermöglicht. Solch ein Material erlaubt eine ähnlich reversible Einlagerung von Lithium-Ionen wie Graphit, weist aber gleichzeitig wegen des nichtgraphitischen Charakters eine deutlich höhere Speicherfähigkeit auf. Zur Beschreibung der Porosität eines Materials verwendet man die Begriffe der Makro-, Meso-, und Mikroporen. Die Aktivität eines Materials kann durch die Erhöhung der Oberfläche noch erheblich gesteigert werden. Hohe Oberflächen können insbesondere durch die Schaffung von Poren im Nanometerbereich erzielt werden. Um die Zugänglichkeit zu diesen Poren zu steigern, weist ein Material idealerweise zusätzlich ein kontinuierliches makroporöses Transportsystem (Porendurchmesser d > 50 nm) auf. Solch eine Art von Porosität über mehrere Größenordnungen wird allgemein als „hierarchische Porosität“ bezeichnet. Für elektrochemische Anwendungen sind sogenannte Mesoporen (d = 2 – 50 nm) relevant, da noch kleinere Poren (Mikroporen, d < 2 nm) z.B. zu einer irreversiblen Bindung von Lithium- Ionen führen können. Wird Mesophasen-Pech als Kohlenstoffprekursor verwendet, kann die Entstehung dieser Mikroporen verhindert werden. Im zweiten und dritten Teil der Arbeit konnte mit den Methoden des „Nanocastings“ zum ersten Mal die spezielle Struktur des Mesophasen-Pech basierenden Kohlenstoffmaterials mit den Vorteilen einer hierarchischen (makro- / meso-) Porosität kombiniert werden. Im ersten Syntheseverfahren wurde dazu ein sogenanntes „hartes Templat“ mit entsprechender Porosität aus Siliziumdioxid repliziert. Aufgrund der hohen Viskosität des Pechs und der geringen Löslichkeit wurde dazu ein Verfahren entwickelt, das die Infiltration des Templates auch auf der Nanometerebene ermöglicht. Das Material konnte in Form größerer Körper (Monolithen) hergestellt werden, die im Vergleich zu Pulvern eine bessere technische Verwendung ermöglichen. Im zweiten Syntheseverfahren konnte die Herstellung eines hierarchisch makro- / mesoporösen Kohlenstoffmaterials erstmals mittels eines weichen Templates (organisches Polymer) erreicht werden. Die einfache Entfernung von weichen Templaten durch eine geeignete Temperaturbehandlung, macht dieses Verfahren im Vergleich zu hart templatierten Materialien kostengünstiger und stellt eine technische Umsetzung in Aussicht. Desweiteren erlaubt das Syntheseverfahren die Herstellung von monolithischen Körpern und die Einbindung funktionaler Nanopartikel. Die hergestellten Materialien zeigen exzellente Eigenschaften als Elektrodenmaterial in Lithium-Ionen-Batterien und als Trägermaterial für Superkondensatoren. KW - Mesoporosität KW - hierarchische Porosität KW - weiche und harte Templatierung KW - Kohlenstoffmaterialien KW - Weitwinkelröntgenstreuung KW - Mesoporosity KW - hierarchical porosity KW - soft and hard templating KW - carbon materials KW - wide-angle x-ray scattering Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15053 ER - TY - THES A1 - Schröder, Birgit Eva T1 - Spatial and temporal dynamics of the terrestrial carbon cycle : assimilation of two decades of optical satellite data into a process-based global vegetation model T1 - Räumliche und zeitliche Dynamik des terrestrischen Kohlenstoffhaushaltes anhand der Assimilation von 20 Jahren optischer Satellitendaten in ein prozessbasiertes dynamisches globales Vegetationsmodell (DGVM) N2 - This PhD thesis presents the spatio-temporal distribution of terrestrial carbon fluxes for the time period of 1982 to 2002 simulated by a combination of the process-based dynamic global vegetation model LPJ and a 21-year time series of global AVHRR-fPAR data (fPAR – fraction of photosynthetically active radiation). Assimilation of the satellite data into the model allows improved simulations of carbon fluxes on global as well as on regional scales. As it is based on observed data and includes agricultural regions, the model combined with satellite data produces more realistic carbon fluxes of net primary production (NPP), soil respiration, carbon released by fire and the net land-atmosphere flux than the potential vegetation model. It also produces a good fit to the interannual variability of the CO2 growth rate. Compared to the original model, the model with satellite data constraint produces generally smaller carbon fluxes than the purely climate-based stand-alone simulation of potential natural vegetation, now comparing better to literature estimates. The lower net fluxes are a result of a combination of several effects: reduction in vegetation cover, consideration of human influence and agricultural areas, an improved seasonality, changes in vegetation distribution and species composition. This study presents a way to assess terrestrial carbon fluxes and elucidates the processes contributing to interannual variability of the terrestrial carbon exchange. Process-based terrestrial modelling and satellite-observed vegetation data are successfully combined to improve estimates of vegetation carbon fluxes and stocks. As net ecosystem exchange is the most interesting and most sensitive factor in carbon cycle modelling and highly uncertain, the presented results complementary contribute to the current knowledge, supporting the understanding of the terrestrial carbon budget. N2 - In der vorliegenden Arbeit wird anhand der Kombination eines dynamischen globalen Vegetationsmodells mit einer Zeitreihe von 21 Jahren optischer Satellitendaten eine realistische Abschätzung der terrestrischen Quellen und Senken von CO2 ermöglicht. Grundlage des hier vorgestellten neuen Modells stellt das dynamische globale Vegetationsmodell LPJ dar, ein prozessorientiertes Vegetationsmodell, das basierend auf ökophysiologischen Grundlagen die Vegetationsverteilung und -dynamik, Störungen (z.B. Feuer) und den Kohlenstoff- sowie den Wasserkreislauf modelliert. Die Kopplung des LPJ-DGVM erfolgte mit einer Zeitreihe globaler AVHRR-fPAR Daten (fPAR – Anteil photosynthetisch aktiver Strahlung), für den Zeitraum 1982 bis 2002 in einer räumlichen Auflösung von 0.5°. Als Ergebnis liegt nun eine globale raum-zeitliche Verteilung aller relevanten Kohlenstoffflüsse vor: Nettoprimärproduktion, Bodenrespiration, Nettoökosystemproduktion, durch Feuer und Ernte emittierter Kohlenstoff, sowie der in Biomasse und Boden gespeicherte Kohlenstoff. Verglichen mit dem Originalmodell haben sich durch die Einspeisung der Satellitendaten alle relevanten Kohlenstoffkomponenten verringert und zeigen nun bessere Übereinstimmung mit Literaturwerten. Die geringeren Kohlenstoffflüsse resultieren aus einer Kombination verschiedener Effekte: geringere Vegetationsbedeckung, Berücksichtigung der landwirtschaftlichen Nutzfläche, realistischere Abbildung der Saisonalität, Veränderung der Vegetationsverteilung und Verschiebung der Artenzusammensetzung. Die globalen Kohlenstoffflüsse werden mit dem vorgestellten Modell realistischer abgebildet als mit Ansätzen, die nur die potentiell natürliche Vegetation simulieren. Insbesondere die Quellen- und Senkendynamik unterliegt vielfältigen Prozessen, die mit einem Modell, dass auch die Bodenrespiration prozessorientiert berücksichtigt, verlässlich geschätzt wird. KW - Vegetationsmodell KW - Kohlenstoffmodell KW - DGVM KW - LPJ KW - Kohlenstoffhaushalt KW - vegetation model KW - carbon cycle KW - DGVM KW - LPJ KW - global change Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17596 ER - TY - THES A1 - Jiang, Chunyan T1 - Multi-visualization and hybrid segmentation approaches within telemedicine framework T1 - Multi-Visualisierung und hybride Segmentierungsansätze auf dem Gebiet der Telemedizin N2 - The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension. N2 - Innovative Informationstechnologien haben viele Bereiche unseres Lebens verändert. Im Gesundheitsbereich ist es mittels Computer möglich, qualitativ hochwertige und große volumetrische Bilddaten zu verwalten, zu verarbeiten und dadurch die medizinische Betreuung zu unterstützen. In dieser Dissertation stelle ich verschiedene Methoden vor, die Mediziner beim Prozess der Beobachtung, Verarbeitung und Nutzung von Bilddaten verstärkt unterstützten können. Meine Forschungsarbeit befasst sich mit drei Schwerpunktthemen: Telemedizinintegration, Visualisierung von medizinischen Bildern und Bildsegmentierung. Zur Demonstration der Machbarkeit der vorgeschlagenen Methoden implementierte ich zudem eine Anwendungssoftware. Das entwickelte System kann in punkto Telemedizinintegration nicht nur Dateien im DICOM Format lesen und schreiben, sondern auch nicht-standardisierte Dateien reparieren. In meiner Arbeit gebe ich außerdem einen Vorschlag für eine Erweiterung des DICOM Standards für die Speicherung von 3D Bildinformationen. Zur Darstellung der Bilddaten wurden in dem entwickelten System drei verschiedene Ansichten implementiert: Volumen Ansicht, Oberflächen Ansicht sowie Querschnitt Ansicht. Ein Großteil meiner Arbeit ist der Vorschlag eines neuen hybriden Bildsegmentierungsansatzes. Durch das neu vorgeschlagene Verfahren können komplexe neurale MRI Daten effizient und präzise segmentiert werden. Zusätzlich wird der manuelle Arbeitsaufwand der Experten drastisch verringert. KW - medizinisch KW - bild KW - Segmentierung KW - medical KW - image KW - segmentation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12829 ER - TY - THES A1 - Müller, Melanie J. I. T1 - Bidirectional transport by molecular motors T1 - Bidirektionaler Transport durch molekulare Motoren N2 - In biological cells, the long-range intracellular traffic is powered by molecular motors which transport various cargos along microtubule filaments. The microtubules possess an intrinsic direction, having a 'plus' and a 'minus' end. Some molecular motors such as cytoplasmic dynein walk to the minus end, while others such as conventional kinesin walk to the plus end. Cells typically have an isopolar microtubule network. This is most pronounced in neuronal axons or fungal hyphae. In these long and thin tubular protrusions, the microtubules are arranged parallel to the tube axis with the minus ends pointing to the cell body and the plus ends pointing to the tip. In such a tubular compartment, transport by only one motor type leads to 'motor traffic jams'. Kinesin-driven cargos accumulate at the tip, while dynein-driven cargos accumulate near the cell body. We identify the relevant length scales and characterize the jamming behaviour in these tube geometries by using both Monte Carlo simulations and analytical calculations. A possible solution to this jamming problem is to transport cargos with a team of plus and a team of minus motors simultaneously, so that they can travel bidirectionally, as observed in cells. The presumably simplest mechanism for such bidirectional transport is provided by a 'tug-of-war' between the two motor teams which is governed by mechanical motor interactions only. We develop a stochastic tug-of-war model and study it with numerical and analytical calculations. We find a surprisingly complex cooperative motility behaviour. We compare our results to the available experimental data, which we reproduce qualitatively and quantitatively. N2 - In biologischen Zellen transportieren molekulare Motoren verschiedenste Frachtteilchen entlang von Mikrotubuli-Filamenten. Die Mikrotubuli-Filamente besitzen eine intrinsische Richtung: sie haben ein "Plus-" und ein "Minus-"Ende. Einige molekulare Motoren wie Dynein laufen zum Minus-Ende, während andere wie Kinesin zum Plus-Ende laufen. Zellen haben typischerweise ein isopolares Mikrotubuli-Netzwerk. Dies ist besonders ausgeprägt in neuronalen Axonen oder Pilz-Hyphen. In diesen langen röhrenförmigen Ausstülpungen liegen die Mikrotubuli parallel zur Achse mit dem Minus-Ende zum Zellkörper und dem Plus-Ende zur Zellspitze gerichtet. In einer solchen Röhre führt Transport durch nur einen Motor-Typ zu "Motor-Staus". Kinesin-getriebene Frachten akkumulieren an der Spitze, während Dynein-getriebene Frachten am Zellkörper akkumulieren. Wir identifizieren die relevanten Längenskalen und charakterisieren das Stauverhalten in diesen Röhrengeometrien mit Hilfe von Monte-Carlo-Simulationen und analytischen Rechnungen. Eine mögliche Lösung für das Stauproblem ist der Transport mit einem Team von Plus- und einem Team von Minus-Motoren gleichzeitig, so dass die Fracht sich in beide Richtungen bewegen kann. Dies wird in Zellen tatsächlich beobachtet. Der einfachste Mechanismus für solchen bidirektionalen Transport ist ein "Tauziehen" zwischen den beiden Motor-Teams, das nur mit mechanischer Interaktion funktioniert. Wir entwickeln ein stochastisches Tauzieh-Modell, das wir mit numerischen und analytischen Rechnungen untersuchen. Es ergibt sich ein erstaunlich komplexes Motilitätsverhalten. Wir vergleichen unsere Resultate mit den vorhandenen experimentellen Daten, die wir qualitativ und quantitativ reproduzieren. KW - molekulare Motoren KW - bidirektionaler intrazellulärer Transport KW - Tauziehen KW - stochastische Prozesse KW - kooperative Phänomene KW - molecular motors KW - bidirectional intracellular transport KW - tug-of-war KW - stochastic processes KW - cooperative phenomena Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-18715 ER - TY - THES A1 - Imran ul-haq, Muhammad T1 - Synthesis of fluorinated polymers in supercritical carbon dioxide (scCO₂) T1 - Synthese von Fluorpolymeren in überkritischem Kohlendioxid (scCO₂) N2 - For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol−1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The “livingness” is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol−1·s−1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10−1, 9·10−2 and 2·10−4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 % for DTBP-derived end groups to a maximum of 62 % for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol–1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol–1 and PFHI (C6F13I) - derived end groups. N2 - Erstmalig gelang es, stabilisatorfreie Vinylidenfluorid (VDF)-Polymerisationen in homogener Phase mit überkritischem CO₂ (scCO₂) bis zu vollständigem Monomerumsatz durchzuführen. Die Homogenität während der Polymerisation wurde durch in-line Fourier-Transform Nahinfrarot Spektroskopie beobachtet. Für Polymerisationen bei 140 °C und 1500 bar wurde Di-tert-butylperoxid (DTBP) als Initiator verwendet. Es wurden Polymere mit einem Zahlenmittel der Molmasse kleiner 104 g·mol–1 und Polydispersitäten zwischen 3.1 und 5.7. erhalten. Um isotherme Reaktionen zu ermöglichen, wurden CO₂-Gehalte zwischen 61 und 83 wt.% verwendet. Die für die homogene Reaktionsführung erforderlichen hohen Drücke und Temperaturen haben keinen Einfluss auf die Mikrostruktur des Polymers. Zur Verringerung der Initiatorkonzentration wurden weitere Polymerisationen unter Verwendung von Kettentransferreagenzien (CTA) bei 120 °C und 1500 bar in homogener Phase mit scCO₂ durchgeführt. Perfluoriertes Hexyliodid als CTA ermöglicht kontrollierte radikalische Polymerisationen, wobei Polymere mit geringer Polydispersität zwischen 1.5 und 1.2 erhalten wurden. Endgruppenanalyse mit Elektronenspray-Ionisations-Massen¬spektro¬metrie (ESI-MS) zeigte, dass keine Initiatorendgruppen im Polymer enthalten sind. Diese Beobachtung unterstützt den lebenden Charakter der Polymerisationen und basiert auf einer labilen C-I-Bindung im Polymer. Aufgrund der schwachen C-I-Bindung trägt das perfluorierte Hexyliodid (C6F13I) auch zur Initiierung bei. Polymerisationen in Gegenwart von BrCCl3, C6F13Br und C6F13H zeigten, dass nur C6F13H keinen Beitrag zur Initiierung leistet. Bei 120 °C und 1500 bar wurde ein kp/kt0.5 von ~ 0.64 (L·mol−1·s−1)0.5 bestimmt, wobei kp der Wachstums- und kt der Terminierungsgeschwindigkeitskoeffizient sind. Die Kettentransfer¬konstanten (CT) bei 120°C betragen 8·10−1, 9·10−2 und 2·10−4 für C6F13I, C6F13Br und C6F13H. Die Änderung der CT-Werte lässt sich mit der zunehmenden Bindungsenergie in der Reihe C-I, C-Br und C-H erklären. Die labile C-I-Bindung ermöglicht eine Funktionalisierung des Polymers durch Click-Reaktionen. Nach Substitution der Iodid-Endgruppe durch eine Azidgruppe erfolgte eine katalysatorfreie 1,3-dipolare Cyclaoaddition mit Alkinen zu Polymeren mit 1,2,3-Triazol-Endgruppen. Dieses endfunktionalisierte PVDF besitzt im Vergleich zu konventionellem PVDF eine höhere thermische Stabilität. Nach der Expansion der Polymerisationsmischung mit scCO₂ auf Umgebungsbedingungen lag das Polymer als weißes Pulver vor, das im Hinblick auf z.B. Polymerendgruppen, Kristallinität, Gestalt und Größe der Partikel untersucht wurde. Rasterelektronenmikroskopie zeigte, dass Polymere mit DTBP-Endgruppen zu stapelförmigen Partikeln führen, während bei CTA-Fragmenten als Endgruppen schwamm- oder rosenartige Partikel erhalten wurden. Ergebnisse der FT-IR Spektroskopie und Weitwinkelröntgenbeugung zeigten, dass der höchste Gehalt an β-phasigem Material, der für die Piezoelektrizität des PVDF verantwortlich ist, für PVDF mit Initiatorendgruppen erhalten wurde. DSC (Differential Scanning Calorimetry) Messungen ergaben zudem, dass der Kristallinitätsgrad durch Endgruppen und Polymermasse beeinflusst wird. Die Expansion der homogenen Polymermischung kann als nicht-optimierter RESS-Prozess (Rapid Expanison from Supercritical Solution,) angesehen werden. Aus RESS Experimenten unter kontrollierten Bedingungen wurden jeweils nanoskalige primäre PVDF-Partikel ohne Verwendung von Lösungsmitteln, Tensiden oder anderen Additiven erhalten. Es besteht ein enger Zusammenhang zwischen einerseits der Partikelgröße und der Partikelgrößenverteilung und andererseits der Polymerkonzentration in scCO₂ vor der Expansion, bestimmt durch Polymerendgruppen und Molmassen der eingesetzten Materialien. KW - Synthese KW - Fluorpolymere KW - überkritisches Kohlendioxid (scCO₂) KW - Synthesis KW - fluorinated polymers KW - supercritical carbon dioxide (scCO₂) Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19868 ER - TY - THES A1 - Nickelt-Czycykowski, Iliya Peter T1 - Aktive Regionen der Sonnenoberfläche und ihre zeitliche Variation in zweidimensionaler Spektro-Polarimetrie T1 - Active regions on the solar surface and their temporal variation in two-dimensional spectropolarimetry N2 - Die Arbeit beschreibt die Analyse von Beobachtungen zweier Sonnenflecken in zweidimensionaler Spektro-Polarimetrie. Die Daten wurden mit dem Fabry-Pérot-Interferometer der Universität Göttingen am Vakuum-Turm-Teleskop auf Teneriffa erfasst. Von der aktiven Region NOAA 9516 wurde der volle Stokes-Vektor des polarisierten Lichts in der Absorptionslinie bei 630,249 nm in Einzelaufnahmen beobachtet, und von der aktiven Region NOAA 9036 wurde bei 617,3 nm Wellenlänge eine 90-minütige Zeitserie des zirkular polarisierten Lichts aufgezeichnet. Aus den reduzierten Daten werden Ergebniswerte für Intensität, Geschwindigkeit in Beobachtungsrichtung, magnetische Feldstärke sowie verschiedene weitere Plasmaparameter abgeleitet. Mehrere Ansätze zur Inversion solarer Modellatmosphären werden angewendet und verglichen. Die teilweise erheblichen Fehlereinflüsse werden ausführlich diskutiert. Das Frequenzverhalten der Ergebnisse und Abhängigkeiten nach Ort und Zeit werden mit Hilfe der Fourier- und Wavelet-Transformation weiter analysiert. Als Resultat lässt sich die Existenz eines hochfrequenten Bandes für Geschwindigkeitsoszillationen mit einer zentralen Frequenz von 75 Sekunden (13 mHz) bestätigen. In größeren photosphärischen Höhen von etwa 500 km entstammt die Mehrheit der damit zusammenhängenden Schockwellen den dunklen Anteilen der Granulen, im Unterschied zu anderen Frequenzbereichen. Die 75-Sekunden-Oszillationen werden ebenfalls in der aktiven Region beobachtet, vor allem in der Lichtbrücke. In den identifizierten Bändern oszillatorischer Power der Geschwindigkeit sind in einer dunklen, penumbralen Struktur sowie in der Lichtbrücke ausgeprägte Strukturen erkennbar, die sich mit einer Horizontalgeschwindigkeit von 5-8 km/s in die ruhige Sonne bewegen. Diese zeigen einen deutlichen Anstieg der Power, vor allem im 5-Minuten-Band, und stehen möglicherweise in Zusammenhang mit dem Phänomen der „Evershed-clouds“. Eingeschränkt durch ein sehr geringes Signal-Rausch-Verhältnis und hohe Fehlereinflüsse werden auch Magnetfeldvariationen mit einer Periode von sechs Minuten am Übergang von Umbra zu Penumbra in der Nähe einer Lichtbrücke beobachtet. Um die beschriebenen Resultate zu erzielen, wurden bestehende Visualisierungsverfahren der Frequenzanalyse verbessert oder neu entwickelt, insbesondere für Ergebnisse der Wavelet-Transformation. N2 - The publication describes the analysis of two sunspot observations in two-dimensional spectropolarimetry. The data was obtained with the Fabry-Pérot-interferometer of Göttingen University at the German Vacuum Tower Telescope on Tenerife. Of the active region NOAA 9516 the full Stokes vector of polarised light was observed in the absorption line at 630.249 nm in single scans. A ninety minute time series of circular polarised light of the active region NOAA 9036 was observed at 617.3 nm wavelength. From the reduced data results for intensity, line-of-sight velocity, magnetic field strength as well as several other plasma parameters are inferred. Different approaches to solar atmosphere model inversion are applied and compared. The significant influence of errors is discussed in detail. The frequency behaviour of the results and spatial and temporal dependencies are further analysed by Fourier and wavelet transformation. As a result the existence of a high frequency band of velocity oscillations with a central frequency of about 75-seconds (13 mHz) can be confirmed. In greater heights of about 500 km the majority of the corresponding shock waves are derived from darker parts of the granules in contrast to the dominant five-minute-oscillations. 75-second-oscillations can also be observed in the active region, especially in the light bridge. In the identified bands of oscillatory velocity power, distinct structures become visible in a penumbral dark structure as well as in the light bridge that move into the quiet sun with a horizontal speed of 5-8 km/s. They show an increase in power, mostly 5-minute-band, and may be related to the Evershed cloud phenomenon. Under the constraint of a very low signal-to-noise ratio and high error influence, magnetic field variations of a 6-minute period are also observed in an umbral-penumbral transition area close to a light bridge. To derive these results, existing visualisation methods for frequency analysis where improved or newly developed, especially so for wavelet transform results. KW - Sonne: Oszillationen KW - Sonne: Sonnenflecken KW - Instrumente: Polarimeter KW - Instrumente: Spektrographen KW - Frequenzanalyse KW - Sun: oszillations KW - Sun: sunspots KW - instrumentation: polarimeters KW - instrumentation: spectrographs KW - frequency analysis Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-25524 ER - TY - THES A1 - Oey, Melanie T1 - Chloroplasts as bioreactors : high-yield production of active bacteriolytic protein antibiotics T1 - Chloroplasten als Bioreaktoren : hocheffiziente Produktion von aktiven, bakteriolytischen Proteinantibiotika N2 - Plants, more precisely their chloroplasts with their bacterial-like expression machinery inherited from their cyanobacterial ancestors, can potentially offer a cheap expression system for proteinaceous pharmaceuticals. This system would be easily scalable and provides appropriate safety due to chloroplasts maternal inheritance. In this work, it was shown that three phage lytic enzymes (Pal, Cpl-1 and PlyGBS) could be successfully expressed at very high levels and with high stability in tobacco chloroplasts. PlyGBS expression reached an amount of foreign protein accumulation (> 70% TSP) that has never been obtained before. Although the high expression levels of PlyGBS caused a pale green phenotype with retarded growth, presumably due to exhaustion of plastid protein synthesis capacity, development and seed production were not impaired under greenhouse conditions. Since Pal and Cpl-1 showed toxic effects when expressed in E. coli, a special plastid transformation vector (pTox) was constructed to allow DNA amplification in bacteria. The construction of the pTox transformation vector allowing a recombinase-mediated deletion of an E. coli transcription block in the chloroplast, leading to an increase of foreign protein accumulation to up to 40% of TSP for Pal and 20% of TSP for Cpl-1. High dose-dependent bactericidal efficiency was shown for all three plant-derived lytic enzymes using their pathogenic target bacteria S. pyogenes and S. pneumoniae. Confirmation of specificity was obtained for the endotoxic proteins Pal and Cpl-1 by application to E. coli cultures. These results establish tobacco chloroplasts as a new cost-efficient and convenient production platform for phage lytic enzymes and address the greatest obstacle for clinical application. The present study is the first report of lysin production in a non-bacterial system. The properties of chloroplast-produced lysins described in this work, their stability, high accumulation rate and biological activity make them highly attractive candidates for future antibiotics. N2 - Lytische Enzyme aus Bakteriophagen bieten Eigenschaften, die sie zu vielversprechenden Medikamenten im Einsatz gegen bakterielle Krankheiten machen. Obwohl sie speziell beim Einsatz gegen bakterielle Infektionen, welche durch Antibiotika resistente Erreger hervorgerufen werden, eine maßgebende Rolle spielen könnten, waren bisher die hohen Produktionskosten ein Hindernis für die medizinische Anwendung. Ein kostengünstiges und einfach zu handhabendes System, wie beispielsweise Chloroplasten in Pflanzen, würde diese lytischen Enzyme zu einer effizienten Alternative zu herkömmlichen Antibiotika machen. In dieser Arbeit wird erstmals die erfolgreiche Produktion von lytischen Enzymen in Tabak-Chloroplasten vorgestellt, welche mit einem Fremdproteingehalt von mehr als 70% des gesamtlöslichen Proteins der Pflanze eine Menge beschreibt, die bisher mit diesem Verfahren noch nicht erreicht wurde. Alle in Chloroplasten hergestellten lytischen Enzyme zeigten hohe spezifische bakteriolytische Aktivität gegen die gewählten Humanpathogene und waren innerhalb von Minuten in der Lage diese Bakterien abzutöten. Zur Herstellung von zwei lytischen Enzymen wurde in dieser Arbeit ein spezieller Shuttle-Vektor entworfen, der die Expression von toxischen Genen innerhalb von E. coli Zellen im Zuge der DNA Replikation vermeidet, jedoch die Herstellung einer ungehinderten Expression der toxischen Gene in den Chloroplasten nach Beseitigung des Selektionsmarkers erlaubte. Ein Vergleich zwischen einem herkömmlich verwendeten Transformationsvektor und dem Shuttle-Vektor mittels eines Reportergens zeigte, dass das neu entwickelte System bis zu 4 mal mehr Protein produzierte. Diese Ergebnisse zeigen das Potential von Chloroplasten als kostengünstige und leicht zu handhabende Produktionsplattform für lytische Enzyme, welche als neue Generation von Antibiotika attraktive Alternativen zu herkömmlichen Therapien bieten. KW - Phagenlysine KW - Chloroplastentransformation KW - Antibiotikaersatz KW - Antibiotikaresistenz KW - Phage lysins KW - Chloroplast transformation KW - Antibiotic alternatives KW - Antibiotic resistance Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-28950 ER - TY - THES A1 - Regel, Stefanie T1 - The comprehension of figurative language : electrophysiological evidence on the processing of irony T1 - Zum Verstehen figurativer Sprache : elektrophysiologische Studien zur Verarbeitung von Ironie N2 - Diese Dissertation untersucht das Verstehen figurativer Sprache, im Besonderen die zeitliche Verarbeitung von verbaler Ironie. In sechs Experimenten wurde mittels ereignis-korrelierter Potentiale (EKP) die Gehirnaktivität beim Verstehen ironischer Äußerungen im Vergleich zu entsprechenden nicht-ironischen Äußerungen gemessen und analysiert. Darüberhinaus wurde der Einfluss verschiedener sprachbegleitender Hinweisreize, z.B. von Prosodie oder der Verwendung von Satzzeichen, sowie außersprachlicher Hinweisreize, wie bspw. pragmatischen Wissens, auf das Ironieverstehen untersucht. Auf Grundlage dieser Ergebnisse werden verschiedene psycholinguistische Modelle figurativer Sprachverarbeitung, d.h. 'standard pragmatic model', 'graded salience hypothesis', sowie 'direct access view', diskutiert. N2 - This dissertation investigates the comprehension of figurative language, in particular the temporal processing of verbal irony. In six experiments using event-related potentials(ERP) brain activity during the comprehension of ironic utterances in relation to equivalent non-ironic utterances was measured and analyzed. Moreover, the impact of various language-accompanying cues, e.g., prosody or the use of punctuation marks, as well as non-verbal cues such as pragmatic knowledge has been examined with respect to the processing of irony. On the basis of these findings different models on figurative language comprehension, i.e., the 'standard pragmatic model', the 'graded salience hypothesis', and the 'direct access view', are discussed. KW - Figurative Sprachverarbeitung KW - verbale Ironie KW - Pragmatik KW - Diskursverstehen KW - EKP KW - Figurative language processing KW - verbal irony KW - pragmatics KW - discourse comprehension KW - ERP Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33376 ER - TY - THES A1 - Gressel, Oliver T1 - Supernova-driven turbulence and magnetic field amplification in disk galaxies T1 - Supernovagetriebene Turbulenz und Magnetfeldverstärkung in Scheibengalaxien N2 - Supernovae are known to be the dominant energy source for driving turbulence in the interstellar medium. Yet, their effect on magnetic field amplification in spiral galaxies is still poorly understood. Analytical models based on the uncorrelated-ensemble approach predicted that any created field will be expelled from the disk before a significant amplification can occur. By means of direct simulations of supernova-driven turbulence, we demonstrate that this is not the case. Accounting for vertical stratification and galactic differential rotation, we find an exponential amplification of the mean field on timescales of 100Myr. The self-consistent numerical verification of such a “fast dynamo” is highly beneficial in explaining the observed strong magnetic fields in young galaxies. We, furthermore, highlight the importance of rotation in the generation of helicity by showing that a similar mechanism based on Cartesian shear does not lead to a sustained amplification of the mean magnetic field. This finding impressively confirms the classical picture of a dynamo based on cyclonic turbulence. N2 - Supernovae sind bekanntermaßen die dominante treibende Energiequelle für Turbulenz im interstellaren Medium. Dennoch ist ihre Auswirkung auf die Verstärkung von Magnetfeldern in Spiralgalaxien weitestgehend unverstanden. Analytische Modelle, die auf der Annahme eines unkorrelierten Ensembles beruhen, sagen voraus, dass das erzeugte Feld aus der galaktischen Scheibe herausgedrängt wird bevor eine substantielle Verstärkung erfolgen kann. Mithilfe numerischer Simulationen supernovagetriebener Turbulenz zeigen wir, dass dies nicht der Fall ist. Unter Berücksichtigung einer vertikalen Schichtung und differentieller galaktischer Rotation beobachten wir eine exponentielle Verstärkung des mittleren Magnetfeldes auf einer Zeitskala von 100 Mio. Jahren. Diese selbstkonsistente numerische Bestätigung eines “schnellen Dynamos” erlaubt es, die beobachteten starken Magnetfelder in jungen Galaxien zu erklären. Darüberhinaus stellen wir die Wichtigkeit der Rotation bei der Erzeugung von Helizität heraus, indem wir zeigen, dass ein ähnlicher Effekt basierend auf kartesischer Scherung nicht zu einer Verstärkung des mittleren Magnetfeldes führt. Dies bestätigt eindrucksvoll das klassische Bild zyklonischer Turbulenz. KW - Turbulenz KW - Magnetfelder KW - Magnetohydrodynamik KW - Supernovaüberreste KW - Galaxien KW - turbulence KW - magnetic fields KW - magnetohydrodynamics KW - supernova remnants KW - galaxies Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29094 ER - TY - THES A1 - Bojdys, Michael Janus T1 - On new allotropes and nanostructures of carbon nitrides T1 - Über neue Allotrope und Nanostrukturen von Karbonitriden N2 - In the first section of the thesis graphitic carbon nitride was for the first time synthesised using the high-temperature condensation of dicyandiamide (DCDA) – a simple molecular precursor – in a eutectic salt melt of lithium chloride and potassium chloride. The extent of condensation, namely next to complete conversion of all reactive end groups, was verified by elemental microanalysis and vibrational spectroscopy. TEM- and SEM-measurements gave detailed insight into the well-defined morphology of these organic crystals, which are not based on 0D or 1D constituents like known molecular or short-chain polymeric crystals but on the packing motif of extended 2D frameworks. The proposed crystal structure of this g-C3N4 species was derived in analogy to graphite by means of extensive powder XRD studies, indexing and refinement. It is based on sheets of hexagonally arranged s-heptazine (C6N7) units that are held together by covalent bonds between C and N atoms. These sheets stack in a graphitic, staggered fashion adopting an AB-motif, as corroborated by powder X-ray diffractometry and high-resolution transmission electron microscopy. This study was contrasted with one of many popular – yet unsuccessful – approaches in the last 30 years of scientific literature to perform the condensation of an extended carbon nitride species through synthesis in the bulk. The second section expands the repertoire of available salt melts introducing the lithium bromide and potassium bromide eutectic as an excellent medium to obtain a new phase of graphitic carbon nitride. The combination of SEM, TEM, PXRD and electron diffraction reveals that the new graphitic carbon nitride phase stacks in an ABA’ motif forming unprecedentedly large crystals. This section seizes the notion of the preceding chapter, that condensation in a eutectic salt melt is the key to obtain a high degree of conversion mainly through a solvatory effect. At the close of this chapter ionothermal synthesis is seen established as a powerful tool to overcome the inherent kinetic problems of solid state reactions such as incomplete polymerisation and condensation in the bulk especially when the temperature requirement of the reaction in question falls into the proverbial “no man’s land” of classical solvents, i.e. above 250 to 300 °C. The following section puts the claim to the test, that the crystalline carbon nitrides obtained from a salt melt are indeed graphitic. A typical property of graphite – namely the accessibility of its interplanar space for guest molecules – is transferred to the graphitic carbon nitride system. Metallic potassium and graphitic carbon nitride are converted to give the potassium intercalation compound, K(C6N8)3 designated according to its stoichiometry and proposed crystal structure. Reaction of the intercalate with aqueous solvents triggers the exfoliation of the graphitic carbon nitride material and – for the first time – enables the access of singular (or multiple) carbon nitride sheets analogous to graphene as seen in the formation of sheets, bundles and scrolls of carbon nitride in TEM imaging. The thus exfoliated sheets form a stable, strongly fluorescent solution in aqueous media, which shows no sign in UV/Vis spectroscopy that the aromaticity of individual sheets was subject to degradation. The final section expands on the mechanism underlying the formation of graphitic carbon nitride by literally expanding the distance between the covalently linked heptazine units which constitute these materials. A close examination of all proposed reaction mechanisms to-date in the light of exhaustive DSC/MS experiments highlights the possibility that the heptazine unit can be formed from smaller molecules, even if some of the designated leaving groups (such as ammonia) are substituted by an element, R, which later on remains linked to the nascent heptazine. Furthermore, it is suggested that the key functional groups in the process are the triazine- (Tz) and the carbonitrile- (CN) group. On the basis of these assumptions, molecular precursors are tailored which encompass all necessary functional groups to form a central heptazine unit of threefold, planar symmetry and then still retain outward functionalities for self-propagated condensation in all three directions. Two model systems based on a para-aryl (ArCNTz) and para-biphenyl (BiPhCNTz) precursors are devised via a facile synthetic procedure and then condensed in an ionothermal process to yield the heptazine based frameworks, HBF-1 and HBF-2. Due to the structural motifs of their molecular precursors, individual sheets of HBF-1 and HBF-2 span cavities of 14.2 Å and 23.0 Å respectively which makes both materials attractive as potential organic zeolites. Crystallographic analysis confirms the formation of ABA’ layered, graphitic systems, and the extent of condensation is confirmed as next-to-perfect by elemental analysis and vibrational spectroscopy. N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung neuer Allotropen und Nanostrukturen von Karbonitriden und berührt einige ihrer möglichen Anwendungen. Alle gezeigten, ausgedehnten, kovalent verbundenen Karbonitridgerüste wurden in einem ionothermalen Syntheseprozess – einer Hochtemperaturbehandlung in einem eutektischen Salzgemisch als ungewöhnlichem Lösungsmittel – aus einfachen Präkursormolkülen erzeugt. Der Kondensationsmechanismus folgt einer temperaturinduzierten Deaminierung und Bildung einer ausgedehnten, aromatischen Einheit; des dreifach substituierten Heptazines. Die Dissertation folgt vier übergreifenden Themen, beginnend mit der Einleitung in Karbonitridsysteme und der Suche nach einem Material, welches einzig aus Kohlenstoff und Stickstoff aufgebaut ist – einer Suche, die 1834 mit den Beobachtungen Justus von Liebigs „über einige Stickstoffverbindungen“ begann. Der erste Abschnitt zeigt die erfolgreiche Synthese von graphitischem Karbonitrid (g-C3N4); einer Spezies, welche auf Schichten hexagonal angeordneter s-Heptazineinheiten beruht, die durch kovalente Bindungen zwischen C- und N-Atomen zusammengehalten werden, und welche in einer graphitischen, verschobenen Art und Weise gestapelt sind. Der zweite Abschnitt berührt die Vielfalt von Salzschmelzensystemen, die für die Ionothermalsynthese geeignet sind und zeigt auf, dass die bloße Veränderung der Salzschmelze eine andere Kristallphase des graphitischen Karbonitrides ergibt – das g-C3N4-mod2. Im dritten Abschnitt wird vom Graphit bekannte Interkallationschemie auf das g-C3N4 angewendet, um eine Kalliuminterkallationsverbindung des graphitischen Karbonitirdes zu erhalten (K(C6N8)3). Diese Verbindung kann in Analogie zum graphitischen System leicht exfoliiert werden, um Bündel von Karbonitridnanoschichten zu erhalten, und weist darüberhinaus interessante optische Eigenschaften auf. Der vierte und letzte Abschnitt handelt von der Einführung von Aryl- und Biphenylbrücken in das Karbonitridmaterial durch rationale Synthese der Präkursormoleküle. Diese ergeben die heptazinbasierten Frameworks, HBF-1 und HBF-2 – zwei kovalente, organische Gerüste. KW - kovalente Rahmenbedingungen KW - mehrschichtige Verbindungen KW - Triazin KW - Heptazine KW - Karbonnitrid Ionothermalsynthese KW - Salzschmelze KW - covalent frameworks KW - layered compounds KW - triazine KW - heptazine KW - carbon nitride KW - ionothermal synthesis KW - salt melt Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41236 ER - TY - THES A1 - Breitenbach, Sebastian Franz Martin T1 - Changes in monsoonal precipitation and atmospheric circulation during the Holocene reconstructed from stalagmites from Northeastern India T1 - Veränderungen monsunalen Niederschlages und atmosphärischer Zirkulation während des Holozäns, rekonstruiert aus Stalagmiten aus Nordostindien N2 - Recent years witnessed a vast advent of stalagmites as palaeoclimate archives. The multitude of geochemical and physical proxies and a promise of a precise and accurate age model greatly appeal to palaeoclimatologists. Although substantial progress was made in speleothem-based palaeoclimate research and despite high-resolution records from low-latitudinal regions, proving that palaeo-environmental changes can be archived on sub-annual to millennial time scales our comprehension of climate dynamics is still fragmentary. This is in particular true for the summer monsoon system on the Indian subcontinent. The Indian summer monsoon (ISM) is an integral part of the intertropical convergence zone (ITCZ). As this rainfall belt migrates northward during boreal summer, it brings monsoonal rainfall. ISM strength depends however on a variety of factors, including snow cover in Central Asia and oceanic conditions in the Indic and Pacific. Presently, many of the factors influencing the ISM are known, though their exact forcing mechanism and mutual relations remain ambiguous. Attempts to make an accurate prediction of rainfall intensity and frequency and drought recurrence, which is extremely important for South Asian countries, resemble a puzzle game; all interaction need to fall into the right place to obtain a complete picture. My thesis aims to create a faithful picture of climate change in India, covering the last 11,000 ka. NE India represents a key region for the Bay of Bengal (BoB) branch of the ISM, as it is here where the monsoon splits into a northwestward and a northeastward directed arm. The Meghalaya Plateau is the first barrier for northward moving air masses and receives excessive summer rainfall, while the winter season is very dry. The proximity of Meghalaya to the Tibetan Plateau on the one hand and the BoB on the other hand make the study area a key location for investigating the interaction between different forcings that governs the ISM. A basis for the interpretation of palaeoclimate records, and a first important outcome of my thesis is a conceptual model which explains the observed pattern of seasonal changes in stable isotopes (d18O and d2H) in rainfall. I show that although in tropical and subtropical regions the amount effect is commonly called to explain strongly depleted isotope values during enhanced rainfall, alone it cannot account for observed rainwater isotope variability in Meghalaya. Monitoring of rainwater isotopes shows no expected negative correlation between precipitation amount and d18O of rainfall. In turn I find evidence that the runoff from high elevations carries an inherited isotopic signature into the BoB, where during the ISM season the freshwater builds a strongly depleted plume on top of the marine water. The vapor originating from this plume is likely to memorize' and transmit further very negative d18O values. The lack of data does not allow for quantication of this plume effect' on isotopes in rainfall over Meghalaya but I suggest that it varies on seasonal to millennial timescales, depending on the runoff amount and source characteristics. The focal point of my thesis is the extraction of climatic signals archived in stalagmites from NE India. High uranium concentration in the stalagmites ensured excellent age control required for successful high-resolution climate reconstructions. Stable isotope (d18O and d13C) and grey-scale data allow unprecedented insights into millennial to seasonal dynamics of the summer and winter monsoon in NE India. ISM strength (i. e. rainfall amount) is recorded in changes in d18Ostalagmites. The d13C signal, reflecting drip rate changes, renders a powerful proxy for dry season conditions, and shows similarities to temperature-related changes on the Tibetan Plateau. A sub-annual grey-scale profile supports a concept of lower drip rate and slower stalagmite growth during dry conditions. During the Holocene, ISM followed a millennial-scale decrease of insolation, with decadal to centennial failures resulting from atmospheric changes. The period of maximum rainfall and enhanced seasonality corresponds to the Holocene Thermal Optimum observed in Europe. After a phase of rather stable conditions, 4.5 kyr ago, the strengthening ENSO system dominated the ISM. Strong El Nino events weakened the ISM, especially when in concert with positive Indian Ocean dipole events. The strongest droughts of the last 11 kyr are recorded during the past 2 kyr. Using the advantage of a well-dated stalagmite record at hand I tested the application of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) to detect sub-annual to sub-decadal changes in element concentrations in stalagmites. The development of a large ablation cell allows for ablating sample slabs of up to 22 cm total length. Each analyzed element is a potential proxy for different climatic parameters. Combining my previous results with the LAICP- MS-generated data shows that element concentration depends not only on rainfall amount and associated leaching from the soil. Additional factors, like biological activity and hydrogeochemical conditions in the soil and vadose zone can eventually affect the element content in drip water and in stalagmites. I present a theoretical conceptual model for my study site to explain how climatic signals can be transmitted and archived in stalagmite carbonate. Further, I establish a first 1500 year long element record, reconstructing rainfall variability. Additionally, I hypothesize that volcanic eruptions, producing large amounts of sulfuric acid, can influence soil acidity and hence element mobilization. N2 - Stalagmiten erfuhren in den letzten Jahren vermehrt Aufmerksamkeit als bedeutende Paläoklima- Archive. Paläoklimatologen sind beeindruckt von der grossen Zahl geochemischer und physikalischer Indikatoren (Proxies) und der Möglichkeit, präzise absolute Altersmodelle zu erstellen. Doch obwohl substantielle Fortschritte in der speleothem-basierten Klimaforschung gemacht wurden, und trotz hochaufgelöster Archive aus niederen Breiten, welche zeigen, das Umweltveränderungen auf Zeitskalen von Jahren bis Jahrtausenden archiviert und rekonstruiert werden können, bleibt unser Verständnis der Klimadynamik fragmentarisch. Ganz besonders gilt dies für den Indischen Sommermonsun (ISM) auf dem Indischen Subkontinent. Der ISM ist heute als ein integraler Bestandteil der intertropischen Konvergenzzone verstanden. Sobald dieser Regengürtel während des borealen Sommer nordwärts migriert kann der ISM seine feuchten Luftmassen auf dem Asiatischen Festland entladen. Dabei hängt die Stärke des ISM von einer Vielzahl von Faktoren ab. Zu diesen gehören die Schneedicke in Zentralasien im vorhergehenden Winter und ozeanische Bedingungen im Indischen und Pazifschen Ozean. Heute sind viele dieser Faktoren bekannt. Trotzdem bleiben deren Mechanismen und internen Verbindungen weiterhin mysteriös. Versuche, korrekte Vorhersagen zu Niederschlagsintensität und Häufigkeit oder zu Dürreereignissen zu erstellen ähneln einem Puzzle. All die verschiedenen Interaktionen müssen an die richtige Stelle gelegt werden, um ein sinnvolles Bild entstehen zu lassen. Meine Dissertation versucht, ein vertrauenswürdiges Bild des sich wandelnden Holozänen Klimas in Indien zu erstellen. NE Indien ist eine Schlüsselregion für den östlichen Arm des ISM, da sich hier der ISM in zwei Arme aufteilt, einen nordwestwärts und einen nordostwärts gerichteten. Das Meghalaya Plateau ist das erste Hindernis für die sich nordwärts bewegenden Luftmassen und erhält entsprechend exzessive Niederschläge während des Sommers. Die winterliche Jahreszeit dagegen ist sehr trocken. Die Nähe zum Tibetplateau einerseits und der Bucht von Bengalen andererseits determinieren die Schlüsselposition dieser Region für das Studium der Interaktionen der den ISM beeinflussenden Kräfte. Ein Fundament für die Interpretation der Paläoklimarecords und ein erstes wichtiges Ergebnis meiner Arbeit ist ein konzeptuelles Modell, welches die beobachteten saisonalen Veränderungen stabiler Isotope (d18O und d2H) im Niederschlag erklärt. Ich zeige, das obwohl in tropischen und subtropischen Regionen meist der amount effect zur Erklärung stark negativer Isotopenwerte während starker Niederschläge herangezogen wird, dieser allein nicht ausreicht, um die Isotopenvariabilität im Niederschlag Meghalaya's zu erklären. Die Langzeitbeobachtung der Regenwasserisotopie zeigt keine negative Korrelation zwischen Niederschlagsmenge und d18O. Es finden sich Hinweise, das der Abfluss aus den Hochgebirgsregionen Tibets und des Himalaya eine Isotopensignatur an das Oberflächenwasser der Bucht von Bengalen vererbt. Dort bildet sich aus isotopisch stark abgereicherten Wässern während des ISM eine Süsswasserlinse aus. Es ist wahrscheinlich, das Wasserdampf, der aus dieser Linse stammt, ein Isotopensignal aufgeprägt bekommt, welches abgereichertes d18O weitertransportiert. Der Mangel an Daten lässt es bisher leider nicht zu, quantitative Aussagen über den Einfluss dieses plume effect' auf Niederschläge in Meghalaya zu treffen. Es lässt sich allerdings vermuten, das dieser Einfluss auf saisonalen wie auch auf langen Zeitskalen variabel ist, abhängig vom Abfluss und der Quellencharacteristik. Der Fokus meiner Arbeit liegt in der Herauslösung klimatischer Signale aus nordostindischen Stalagmiten. Hohe Urankonzentrationen in diesen Stalagmiten erlaubt eine exzellente Alterskontrolle, die für hochauflösende Klimarekonstruktionen unerlässlich ist. Die stabilen Isotope (d18O und d13C), sowie Grauwertdaten, erlauben einmalige Einblicke in die Dynamik des Sommer und auch des Wintermonsun in NE Indien. Die ISM Stärke (d. h. Niederschlagsmenge) wird in Veränderungen in den d18Ostalagmites reflektiert. Das d13C Signal, welches Tropfratenänderungen speichert, dient als potenter Indikator für winterliche Trockenheitsbedingungen. Es zeigt Ähnlichkeit zu temperaturabhängigen Veränderungen auf dem Tibetplateau. Das sub-annuell aufgelöste Grauwertprofil stärkt das Konzept, das verminderte Tropfraten und langsameres Stalagmitenwachstum eine Folge von Trockenheit sind. Während des Holozäns folgte der ISM der jahrtausendelangen Verringerung der Insolation. Es finden sich aber ebenso rapide Anomalien, die aus atmosphärischen Veränderungen resultieren. Die Phase des höchsten Niederschlages und erhöhter Saisonalität korrespondiert mit dem Holozänen Thermalen Maximum. Nach einer Phase einigermassen stabilen Bedingungen begann vor ca. 4500 Jahren ENSO einen zunehmenden Einfluss auf den ISM auszuüben. Starke El Nino Ereignisse schwächen den ISM, besonders wenn diese zeitgleich mit positiven Indian Ocean Dipole Ereignissen auftreten. Die stärksten Dürren des gesamten Holozäns traten in den letzten 2000 Jahren auf. Um zusätzliche Informationen aus den hervorragenden Proben zu gewinnen nutzte ich die Vorteile der laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Diese erlaubt die Detektion sub-annueller bis sub-dekadischer Elementkonzentrationsveränderungen in Stalagmiten. Mittels einer neu entwickelten Ablationszelle konnten Proben von maximal 22 cm Länge untersucht werden. Jedes analysierte Element ist ein potentieller Träger einer Klimainformation. Die Kombination der früheren Ergebnisse mit denen der LA-IPC-MS zeigt, das die Elementkonzentrationen nicht nur von Niederschlagsveränderungen und assoziiertem Auswaschen aus dem Boden abhängen. Zusätzlich können auch die biologische Aktivität und hydrogeochemische Bedingungen in der vadosen Zone Einfluss auf die Elementzusammensetzung im Tropfwasser und in den Stalagmiten haben. Darum entwickelte ich ein theoretisches Modell für meinen Standort, um zu klären, wie Klimasignale von der Atmosphäre in die Höhle transportiert werden können. Ein anschliessend rekonstruierter 1500 Jahre langer Proxyrecord zeigt Niederschlagsvariabilität an. Zudem besteht die Möglichkeit, das Vulkaneruptionen, welche grosse Mengen an Schwefelsäure produzieren, eine Bodenversauerung verursachen und damit die Elementmobilisierung verstärken können. KW - Indischer Sommermonsun KW - Stabile Isotope KW - Stalagmiten KW - Holozän KW - Bucht von Bengalen KW - Indian Summer Monsoon KW - Bay of Bengal KW - stable isotopes KW - stalagmites KW - Laser ablation Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-37807 ER - TY - THES A1 - Mörbt, Nora T1 - Differential proteome analysis of human lung epithelial cells following exposure to aromatic volatile organic compounds T1 - Differentielle Proteomeanalyse humaner Lungenepithelzellen nach Exposition mit aromatischen flüchtigen Substanzen N2 - The widespread usage of products containing volatile organic compounds (VOC) has lead to a general human exposure to these chemicals in work places or homes being suspected to contribute to the growing incidence of environmental diseases. Since the causal molecular mechanisms for the development of these disorders are not completely understood, the overall objective of this thesis was to investigate VOC-mediated molecular effects on human lung cells in vitro at VOC concentrations comparable to exposure scenarios below current occupational limits. Although differential expression of single proteins in response to VOCs has been reported, effects on complex protein networks (proteome) have not been investigated. However, this information is indispensable when trying to ascertain a mechanism for VOC action on the cellular level and establishing preventive strategies. For this study, the alveolar epithelial cell line A549 has been used. This cell line, cultured in a two-phase (air/liquid) model allows the most direct exposure and had been successfully applied for the analysis of inflammatory effects in response to VOCs. Mass spectrometric identification of 266 protein spots provided the first proteomic map of A549 cell line to this extent that may foster future work with this frequently used cellular model. The distribution of three typical air contaminants, monochlorobenzene (CB), styrene and 1,2 dichlorobenzene (1,2-DCB), between gas and liquid phase of the exposure model has been analyzed by gas chromatography. The obtained VOC partitioning was in agreement with available literature data. Subsequently the adapted in vitro system has been successfully employed to characterize the effects of the aromatic compound styrene on the proteome of A549 cells (Chapter 4). Initially, the cell toxicity has been assessed in order to ensure that most of the concentrations used in the following proteomic approach were not cytotoxic. Significant changes in abundance and phosphorylation in the total soluble protein fraction of A549 cells have been detected following styrene exposure. All proteins have been identified using mass spectrometry and the main cellular functions have been assigned. Validation experiments on protein and transcript level confirmed the results of the 2-DE experiments. From the results, two main cellular pathways have been identified that were induced by styrene: the cellular oxidative stress response combined with moderate pro-apoptotic signaling. Measurement of cellular reactive oxygen species (ROS) as well as the styrene-mediated induction of oxidative stress marker proteins confirmed the hypothesis of oxidative stress as the main molecular response mechanism. Finally, adducts of cellular proteins with the reactive styrene metabolite styrene 7,8 oxide (SO) have been identified. Especially the SO-adducts observed at both the reactive centers of thioredoxin reductase 1, which is a key element in the control of the cellular redox state, may be involved in styrene-induced ROS formation and apoptosis. A similar proteomic approach has been carried out with the halobenzenes CB and 1,2-DCB (Chapter 5). In accordance with previous findings, cell toxicity assessment showed enhanced toxicity compared to the one caused by styrene. Significant changes in abundance and phosphorylation of total soluble proteins of A549 cells have been detected following exposure to subtoxic concentrations of CB and 1,2-DCB. All proteins have been identified using mass spectrometry and the main cellular functions have been assigned. As for the styrene experiment, the results indicated two main pathways to be affected in the presence of chlorinated benzenes, cell death signaling and oxidative stress response. The strong induction of pro-apoptotic signaling has been confirmed for both treatments by detection of the cleavage of caspase 3. Likewise, the induction of redox-sensitive protein species could be correlated to an increased cellular level of ROS observed following CB treatment. Finally, common mechanisms in the cellular response to aromatic VOCs have been investigated (Chapter 6). A similar number (4.6-6.9%) of all quantified protein spots showed differential expression (p<0.05) following cell exposure to styrene, CB or 1,2-DCB. However, not more than three protein spots showed significant regulation in the same direction for all three volatile compounds: voltage-dependent anion-selective channel protein 2, peroxiredoxin 1 and elongation factor 2. However, all of these proteins are important molecular targets in stress- and cell death-related signaling pathways. N2 - Die vermehrte Verwendung von Produkten, welche flüchtige organische Substanzen (VOC - volatile organic compound) enthalten, hat eine generelle Exposition der Bevölkerung mit diesen Substanzen an Arbeitsplätzen aber auch in Wohnräumen bedingt. VOCs stehen im Verdacht, zur zunehmenden Inzidenz umweltbedingter Erkrankungen beizutragen. Da die molekularen Ursachen dieser Erkrankungen bisher noch unverstanden sind, war es ein übergeordnetes Ziel dieser Arbeit, VOC-vermittelte molekulare Effekte in menschlichen Lungenepithelzellen anhand eines in vitro Modells zu untersuchen. Dabei sollten vor allem Konzentrationen unterhalb der gültigen Arbeitsplatzgrenzwerte untersucht werden. Obwohl Effekte auf einzelne Proteine bekannt sind, wurden bisher keine Effekte der VOC-Exposition auf das komplexe Netzwerk der zellulären Proteine (Proteom) untersucht. Dieses Wissen ist essentiell, um induzierte zelluläre Mechanismen zu verstehen und Strategien zu deren Vermeidung zu entwickeln. Für die hier durchgeführten Untersuchungen wurde die Lungenepithelzelllinie A549 in einem Zweiphasenexpositionsmodell eingesetzt. Dieses ermöglichte eine möglichst direkte zelluläre Exposition und wurde bereits erfolgreich verwendet, um durch VOC hervorgerufene Entzündungseffekte zu identifizieren. Die massen-spektrometrische Identifikation von 266 Proteinflecken lieferte die erste umfassende Proteomkarte der A549 Zelllinie, welche nachfolgende Untersuchungen mit diesem häufig verwendeten Zelltyp erleichtern wird. Zusätzlich wurde die Verteilung der drei gängigen Luftkontaminanten Chlorbenzol (CB), Styrol and 1,2-Dichlorobenzol (1,2-DCB) zwischen den beiden Phasen (gas/flüssig) des Expositionsmodells gaschromatographisch bestimmt. Die Verteilung entsprach den verfügbaren Literaturdaten. Anschließend wurde das modifizierte Expositionsmodell erfolgreich eingesetzt, um styrol-vermittelte Effekte auf das Proteom der A549 Zellen zu charakterisieren (Kapitel 4). Zu Beginn erfolgte die Erfassung der Zelltoxizität der Substanz, um sicher zu stellen, daß der überwiegende Teil der späteren Expositionsexperimente mit subtoxischen Konzentrationen durchgeführt wird. Es konnte eine signifikant veränderte Expression und Phosphorylierung der löslichen Proteinfraktion der A549 Zellen als Reaktion auf die Styrolexposition festgestellt werden. Die regulierten Proteine wurden massenspektrometrisch identifiziert und ihre wichtigsten Funktionen wurden zugewiesen. Validierungsexperimente auf Protein- und auf Transkriptebene bestätigten die 2-DE Ergebnisse. Insgesamt konnte die zelluläre Reaktion durch die styrol-vermittelte Induktion zweier zentraler Mechanismen erklärt werden: oxidativer zellulärer Stress und beginnende Apoptose. Folgeexperimente wie die Messung der Menge der zellulären reaktiven Sauerstoffspezies (ROS) und die Induktion von redox-sensitiven Markerproteinen konnte die Hypothese eines styrol-induzierten oxidativen Milieus bestätigen. Schließlich wurden Proteinaddukte des reaktiven Styrolmetaboliten Styrol 7,8 epoxide (SO) identifiziert. Besonders die SO-Addukte, welche and den beiden aktiven Zentren der Thioredoxin Reduktase 1 gefunden wurden könnten eine wichtige Rolle bei der styrol-induzierten ROS-Bildung sowie der beginnenden Apoptose spielen. In Analogie zum Styrolexperiment wurden die Effekte der halogenierten Benzole CB und 1,2-DCB untersucht (Kapitel 5). Es konnten ebenfalls sämtliche Proteine identifiziert und die wichtigsten zellulären Funktionen zugewiesen werden. Diese Substanzen modulierten ebenfalls apoptotische Signalwege und die zelluläre Antwort auf oxidativen Streß. Der beobachtete starke pro-apoptotische Effekt konnte für beide Substanzen mit der Spaltung der Caspase 3 nachgewiesen werden. Weiterhin konnte für CB die Induktion redox-sensitiver Proteinspezies mit einem beobachteten höherem Gehalt an ROS erklärt werden. Schließlich wurden ähnliche Mechanismen der zellulären Antwort auf die Exposition mit den drei untersuchten aromatischen VOCs diskutiert (Kapitel 6). Alle getesteten VOCs verursachten eine vergleichbare differentielle Expression (p<0,05) von 4,6-6,9% aller quantifizierten Proteinspezies. Nur drei Proteinspots wurden dabei gemeinsam für alle VOCs reguliert: voltage-dependent anion-selective channel protein 2, peroxiredoxin 1 and elongation factor 2. Allerdings gehören diese drei Proteine zu wichtigen zellulären Zielstrukturen der Signalwege für Stressantwort und Zelltod. KW - VOC KW - Proteom KW - Styrol KW - chlorbenzol KW - dichlorbenzol KW - VOC KW - proteome KW - styrene KW - monochlorobenzene KW - dichlorobenzene Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49257 ER - TY - THES A1 - Ruch, Joël T1 - Volcano deformation analysis in the Lazufre area (central Andes) using geodetic and geological observations T1 - Vulkan Deformationsanalyse im Bereich Lazufre (Zentral-Anden) mit geodätischen und geologischen Beobachtungen N2 - Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring. N2 - Vulkanische Deformationen in großem Maßstab, die mittels InSAR gemessen wurden, liefern neue Informationen und dadurch einen neuen Blickwinkel auf vulkan-tektonische Aktivitäten und das Verständnis von langlebigen, magmatischen Systemen. Die Destabilisierung eines solchen Systems in der Tiefe beeinflusst dauerhaft die Oberfläche durch Versatz des Bodens, magmatische Einflüsse und vulkanische Unruhen. Mit der Kombination aus kleinräumigem Bodenversatz gemessen mittels InSAR, numerischer Modellierung und langfristigen geologischen Beobachtungen, analysieren wir die Gegend um den Vulkan Lazufre in den Zentralanden, um die raumzeitliche Entwicklung der Region zu bestimmen. Bodenversatz wurde hierbei im Jahr 1997 mittels Radar-Interferrometrie (InSAR) gemessen, was eine Fläche von 1800 km² ausmacht, vergleichbar mit der Größe der Deformation des Kraters. Im Jahr 2000 wurde zusätzlich eine kleinräumige Deformation am Nachbarvulkan Lastarria entdeckt. Wir sehen räumliche als auch zeitliche Verbindungen zwischen der Deformation des Vulkans und vulkanischen Strukturen innerhalb der betroffenen Gegend. Wir folgern daraus, dass diese Beobachtungen der Ausdruck eines langlebigen, magmatischen Systems in der Tiefe an der Oberfläche sind. Es ist noch nicht klar, ob Lazufre größere vulkanische Unruhen, wie zum Beispiel Eruptionen auslösen könnte, aber die Deformation am Vulkan Lastarria und ein Anstieg der großräumigen Deformationsrate, machen diese Region interessant für eine zukünftige, kontinuierliche Überwachung. KW - Vulkan Verformung KW - InSAR KW - zentralen Anden KW - Spannungsfeld KW - volcano deformation KW - InSAR KW - central Andes KW - stress field Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-47361 ER - TY - THES A1 - Höchner, Andreas T1 - GPS based analysis of earthquake induced phenomena at the Sunda Arc T1 - GPS-basierte Analyse erdbebeninduzierter Phänomene am Sundabogen N2 - Indonesia is one of the countries most prone to natural hazards. Complex interaction of several tectonic plates with high relative velocities leads to approximately two earthquakes with magnitude Mw>7 every year, being more than 15% of the events worldwide. Earthquakes with magnitude above 9 happen far more infrequently, but with catastrophic effects. The most severe consequences thereby arise from tsunamis triggered by these subduction-related earthquakes, as the Sumatra-Andaman event in 2004 showed. In order to enable efficient tsunami early warning, which includes the estimation of wave heights and arrival times, it is necessary to combine different types of real-time sensor data with numerical models of earthquake sources and tsunami propagation. This thesis was created as a result of the GITEWS project (German Indonesian Tsunami Early Warning System). It is based on five research papers and manuscripts. Main project-related task was the development of a database containing realistic earthquake scenarios for the Sunda Arc. This database provides initial conditions for tsunami propagation modeling used by the simulation system at the early warning center. An accurate discretization of the subduction geometry, consisting of 25x150 subfaults was constructed based on seismic data. Green’s functions, representing the deformational response to unit dip- and strike slip at the subfaults, were computed using a layered half-space approach. Different scaling relations for earthquake dimensions and slip distribution were implemented. Another project-related task was the further development of the ‘GPS-shield’ concept. It consists of a constellation of near field GPS-receivers, which are shown to be very valuable for tsunami early warning. The major part of this thesis is related to the geophysical interpretation of GPS data. Coseismic surface displacements caused by the 2004 Sumatra earthquake are inverted for slip at the fault. The effect of different Earth layer models is tested, favoring continental structure. The possibility of splay faulting is considered and shown to be a secondary order effect in respect to tsunamigenity for this event. Tsunami models based on source inversions are compared to satellite radar altimetry observations. Postseismic GPS time series are used to test a wide parameter range of uni- and biviscous rheological models of the asthenosphere. Steady-state Maxwell rheology is shown to be incompatible with near-field GPS data, unless large afterslip, amounting to more than 10% of the coseismic moment is assumed. In contrast, transient Burgers rheology is in agreement with data without the need for large aseismic afterslip. Comparison to postseismic geoid observation by the GRACE satellites reveals that even with afterslip, the model implementing Maxwell rheology results in amplitudes being too small, and thus supports a biviscous asthenosphere. A simple approach based on the assumption of quasi-static deformation propagation is introduced and proposed for inversion of coseismic near-field GPS time series. Application of this approach to observations from the 2004 Sumatra event fails to quantitatively reconstruct the rupture propagation, since a priori conditions are not fulfilled in this case. However, synthetic tests reveal the feasibility of such an approach for fast estimation of rupturing properties. N2 - Indonesien ist eines der am stärksten von Naturkatastrophen bedrohten Länder der Erde. Die komplexe Interaktion mehrer tektonischer Platten, die sich mit hohen Relativgeschwindigkeiten zueinander bewegen, führt im Mittel zu ungefähr zwei Erdbeben mit Magnitude Mw>7 pro Jahr, was mehr als 15% der Ereignisse weltweit entspricht. Beben mit Magnitude über 9 sind weitaus seltener, haben aber katastrophale Folgen. Die schwerwiegendsten Konsequenzen hierbei werden durch Tsunamis verursacht, welche durch diese Subduktionsbeben ausgelöst werden, wie das Sumatra-Andamanen Ereignis von 2004 gezeigt hat. Um eine wirksame Tsunami-Frühwarnung zu ermöglichen, welche die Abschätzung der Wellenhöhen und Ankunftszeiten beinhaltet, ist es erforderlich, verschieden Arten von Echtzeit-Sensordaten mit numerischen Modellen für die Erdbebenquelle und Tsunamiausbreitung zu kombinieren. Diese Doktorarbeit wurde im Rahmen des GITEWS-Projektes (German Indonesian Tsunami Early Warning System) erstellt und umfasst fünf Fachpublikationen und Manuskripte. Projektbezogene Hauptaufgabe war die Erstellung einer Datenbank mit realistischen Bebenszenarien für den Sundabogen. Die Datenbank beinhaltet Anfangsbedingungen für die Tsunami-Ausbreitungsmodellierung und ist Teil des Simulationssystems im Frühwarnzentrum. Eine sorgfältige Diskretisierung der Subduktionsgeometrie, bestehend aus 25x150 subfaults, wurde basierend auf seismischen Daten erstellt. Greensfunktionen, welche die Deformation, hervorgerufen durch Verschiebung an den subfaults ausmachen, wurden mittels eines semianalytischen Verfahrens für den geschichteten Halbraum berechnet. Verschiedene Skalierungsrelationen für Erdbebendimension und slip-Verteilung wurden implementiert. Eine weitere projektbezogene Aufgabe war die Weiterentwicklung des ‚GPS-Schild’-Konzeptes. Dieses besteht aus einer Konstellation von GPS-Empfängern im Nahfeldbereich, welche sich als sehr wertvoll für die Tsunami-Frühwarnung erweisen. Der größere Teil dieser Doktorarbeit beschäftigt sich mit der geophysikalischen Interpretation von GPS-Daten. Coseismische Verschiebungen an der Erdoberfläche, ausgelöst durch das Erdbeben von 2004, werden nach slip an der Verwerfung invertiert. Die Wirkung verschiedener Erdschichtungsmodelle wird getestet und resultiert in der Bevorzugung einer kontinentalen Struktur. Die Möglichkeit von splay-faulting wird untersucht und erweist sich als zweitrangiger Effekt bezüglich der Tsunamiwirkung für dieses Ereignis. Die auf der Quelleninversion basierenden Tsunamimodelle werden mit satellitengestützen Radaraltimetriedaten verglichen. Postseismische GPS-Daten werden verwendet, um einen weiten Parameterbereich uni- und bi-viskoser Modelle der Asthenosphäre zu testen. Dabei stellt sich stationäre Maxwell-Rheologie als inkompatibel mit Nahfeld-GPS-Zeitreihen heraus, es sei denn, eine große Quantität an afterslip, entsprechend etwa 10% des coseismischen Momentes, wird angenommen. Im Gegensatz dazu ist die transiente Burgers-Rheologie ohne große Mengen an afterslip kompatibel zu den Beobachtungen. Der Vergleich mit postseismischen Geoidbeobachtungen durch die GRACE-Satelliten zeigt, dass das Modell basierend auf Maxwell-Rheologie, auch mit afterslip, zu kleine Amplituden liefert, und bekräftigt die Annahme einer biviskosen Rheologie der Asthenosphäre. Ein einfacher Ansatz, der auf einer quasi-statischen Deformationsausbreitung beruht, wird eingeführt und zur Inversion coseismischer Nahfeld-GPS-Zeitreihen vorgeschlagen. Die Anwendung dieses Ansatzes auf Beobachtungen vom Sumatra-Beben von 2004 ermöglicht nicht die quantitative Rekonstruktion der Ausbreitung des Bruches, da die notwendigen Bedingungen in diesem Fall nicht erfüllt sind. Jedoch zeigen Experimente an synthetischen Daten die Gültigkeit eines solchen Ansatzes zur raschen Abschätzung der Bruchausbreitungseigenschaften. KW - GPS KW - Erdbeben KW - Tsunami KW - Rheologie KW - GITEWS KW - GPS KW - Earthquake KW - Tsunami KW - Rheology KW - GITEWS Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53166 ER - TY - THES A1 - Kellermann, Thorsten T1 - Accurate numerical relativity simulations of non-vacuumspace-times in two dimensions and applications to critical collapse T1 - Exakte numerisch relativistische Simulationen der Nicht-Vakuum-Raum-Zeit in zwei Dimensionen und deren Anwendung zu Problemen des kritischen Kollaps N2 - This Thesis puts its focus on the physics of neutron stars and its description with methods of numerical relativity. In the first step, a new numerical framework the Whisky2D code will be developed, which solves the relativistic equations of hydrodynamics in axisymmetry. Therefore we consider an improved formulation of the conserved form of these equations. The second part will use the new code to investigate the critical behaviour of two colliding neutron stars. Considering the analogy to phase transitions in statistical physics, we will investigate the evolution of the entropy of the neutron stars during the whole process. A better understanding of the evolution of thermodynamical quantities, like the entropy in critical process, should provide deeper understanding of thermodynamics in relativity. More specifically, we have written the Whisky2D code, which solves the general-relativistic hydrodynamics equations in a flux-conservative form and in cylindrical coordinates. This of course brings in 1/r singular terms, where r is the radial cylindrical coordinate, which must be dealt with appropriately. In the above-referenced works, the flux operator is expanded and the 1/r terms, not containing derivatives, are moved to the right-hand-side of the equation (the source term), so that the left hand side assumes a form identical to the one of the three-dimensional (3D) Cartesian formulation. We call this the standard formulation. Another possibility is not to split the flux operator and to redefine the conserved variables, via a multiplication by r. We call this the new formulation. The new equations are solved with the same methods as in the Cartesian case. From a mathematical point of view, one would not expect differences between the two ways of writing the differential operator, but, of course, a difference is present at the numerical level. Our tests show that the new formulation yields results with a global truncation error which is one or more orders of magnitude smaller than those of alternative and commonly used formulations. The second part of the Thesis uses the new code for investigations of critical phenomena in general relativity. In particular, we consider the head-on-collision of two neutron stars in a region of the parameter space where two final states a new stable neutron star or a black hole, lay close to each other. In 1993, Choptuik considered one-parameter families of solutions, S[P], of the Einstein-Klein-Gordon equations for a massless scalar field in spherical symmetry, such that for every P > P⋆, S[P] contains a black hole and for every P < P⋆, S[P] is a solution not containing singularities. He studied numerically the behavior of S[P] as P → P⋆ and found that the critical solution, S[P⋆], is universal, in the sense that it is approached by all nearly-critical solutions regardless of the particular family of initial data considered. All these phenomena have the common property that, as P approaches P⋆, S[P] approaches a universal solution S[P⋆] and that all the physical quantities of S[P] depend only on |P − P⋆|. The first study of critical phenomena concerning the head-on collision of NSs was carried out by Jin and Suen in 2007. In particular, they considered a series of families of equal-mass NSs, modeled with an ideal-gas EOS, boosted towards each other and varied the mass of the stars, their separation, velocity and the polytropic index in the EOS. In this way they could observe a critical phenomenon of type I near the threshold of black-hole formation, with the putative solution being a nonlinearly oscillating star. In a successive work, they performed similar simulations but considering the head-on collision of Gaussian distributions of matter. Also in this case they found the appearance of type-I critical behaviour, but also performed a perturbative analysis of the initial distributions of matter and of the merged object. Because of the considerable difference found in the eigenfrequencies in the two cases, they concluded that the critical solution does not represent a system near equilibrium and in particular not a perturbed Tolmann-Oppenheimer-Volkoff (TOV) solution. In this Thesis we study the dynamics of the head-on collision of two equal-mass NSs using a setup which is as similar as possible to the one considered above. While we confirm that the merged object exhibits a type-I critical behaviour, we also argue against the conclusion that the critical solution cannot be described in terms of equilibrium solution. Indeed, we show that, in analogy with what is found in, the critical solution is effectively a perturbed unstable solution of the TOV equations. Our analysis also considers fine-structure of the scaling relation of type-I critical phenomena and we show that it exhibits oscillations in a similar way to the one studied in the context of scalar-field critical collapse. N2 - Diese Arbeit legt seinen Schwerpunkt auf die Physik von Neutronensternen und deren Beschreibung mit Methoden der numerischen Relativitätstheorie. Im ersten Schritt wird eine neue numerische Umgebung, der Whisky2D Code entwickelt, dieser löst die relativistischen Gleichungen der Hydrodynamik in Axialymmetrie. Hierzu betrachten wir eine verbesserte Formulierung der sog. "flux conserved formulation" der Gleichungen. Im zweiten Teil wird der neue Code verwendet , um das kritische Verhalten zweier kollidierenden Neutronensternen zu untersuchen. In Anbetracht der Analogie, um Übergänge in der statistischen Physik Phase werden wir die Entwicklung der Entropie der Neutronensterne während des gesamten Prozesses betrachten. Ein besseres Verständnis der Evolution von thermodynamischen Größen, wie der Entropie in kritischer Prozess, sollte zu einem tieferen Verständnis der relativistischen Thermodynamik führen. Der Whisky2D Code, zur Lösung Gleichungen relativistischer Hydrodynamik wurde in einer „flux conserved form“ und in zylindrischen Koordinaten geschrieben. Hierdurch entstehen 1 / r singuläre Terme, wobei r der ist, die entsprechend behandelt werden müssen. In früheren Arbeiten, wird der Operator expandiert und die 1 / r spezifisch Therme auf die rechte Seite geschrieben, so dass die linke Seite eine Form annimmt, die identisch ist mit der kartesischen Formulierung. Wir nennen dies die Standard-Formulierung. Eine andere Möglichkeit ist, die Terme nicht zu expandieren, den und den 1/r Term in die Gleichung hinein zu ziehen. Wir nennen dies die Neue-Formulierung. Die neuen Gleichungen werden mit den gleichen Verfahren wie im kartesischen Fall gelöst. Aus mathematischer Sicht ist keine Unterschiede zwischen den beiden Formulierungen zu erwarten, erst die numerische Sicht zeigt die Unterschiede auf. Versuche zeigen, dass die Neue-Formulierung numerische Fehler um mehrere Größenordnungen reduziert. Der zweite Teil der Dissertation verwendet den neuen Code für die Untersuchung kritischer Phänomene in der allgemeinen Relativitätstheorie. Insbesondere betrachten wir die Kopf-auf-Kollision zweier Neutronensterne in einem Bereich des Parameter Raums, deren zwei mögliche Endzustände entweder einen neuen stabilen Neutronenstern oder ein Schwarzes Loch darstellen. Im Jahr 1993, betrachtete Choptuik Ein-Parameter-Familien von Lösungen, S [P], der Einstein-Klein-Gordon-Gleichung für ein masseloses Skalarfeld in sphärischer Symmetrie, so dass für jedes P> P ⋆, S[P] ein Schwarzes Loch enthalten ist und jedes P

10000 years down to a seasonal resolution. Since lake basins additionally act as natural sediment traps, the riverine sediment supply, which is preserved as detrital event layers in the lake sediments, can be used as a proxy for extreme discharge events. Within my thesis I examined a ~ 8.50 m long sedimentary record from the pre-Alpine Lake Mondsee (Northeast European Alps), which covered the last 7000 years. This sediment record consists of calcite varves and intercalated detrital layers, which range in thickness from 0.05 to 32 mm. Detrital layer deposition was analysed by a combined method of microfacies analysis via thin sections, Scanning Electron Microscopy (SEM), μX-ray fluorescence (μXRF) scanning and magnetic susceptibility. This approach allows characterizing individual detrital event layers and assigning a corresponding input mechanism and catchment. Based on varve counting and controlled by 14C age dates, the main goals of this thesis are (i) to identify seasonal runoff processes, which lead to significant sediment supply from the catchment into the lake basin and (ii) to investigate flood frequency under changing climate boundary conditions. This thesis follows a line of different time slices, presenting an integrative approach linking instrumental and historical flood data from Lake Mondsee in order to evaluate the flood record inferred from Lake Mondsee sediments. The investigation of eleven short cores covering the last 100 years reveals the abundance of 12 detrital layers. Therein, two types of detrital layers are distinguished by grain size, geochemical composition and distribution pattern within the lake basin. Detrital layers, which are enriched in siliciclastic and dolomitic material, reveal sediment supply from the Flysch sediments and Northern Calcareous Alps into the lake basin. These layers are thicker in the northern lake basin (0.1-3.9 mm) and thinner in the southern lake basin (0.05-1.6 mm). Detrital layers, which are enriched in dolomitic components forming graded detrital layers (turbidites), indicate the provenance from the Northern Calcareous Alps. These layers are generally thicker (0.65-32 mm) and are solely recorded within the southern lake basin. In comparison with instrumental data, thicker graded layers result from local debris flow events in summer, whereas thin layers are deposited during regional flood events in spring/summer. Extreme summer floods as reported from flood layer deposition are principally caused by cyclonic activity from the Mediterranean Sea, e.g. July 1954, July 1997 and August 2002. During the last two millennia, Lake Mondsee sediments reveal two significant flood intervals with decadal-scale flood episodes, during the Dark Ages Cold Period (DACP) and the transition from the Medieval Climate Anomaly (MCA) into the Little Ice Age (LIA) suggesting a linkage of transition to climate cooling and summer flood recurrences in the Northeastern Alps. In contrast, intermediate or decreased flood episodes appeared during the MWP and the LIA. This indicates a non-straightforward relationship between temperature and flood recurrence, suggesting higher cyclonic activity during climate transition in the Northeast Alps. The 7000-year flood chronology reveals 47 debris flows and 269 floods, with increased flood activity shifting around 3500 and 1500 varve yr BP (varve yr BP = varve years before present, before present = AD 1950). This significant increase in flood activity shows a coincidence with millennial-scale climate cooling that is reported from main Alpine glacier advances and lower tree lines in the European Alps since about 3300 cal. yr BP (calibrated years before present). Despite relatively low flood occurrence prior to 1500 varve yr BP, floods at Lake Mondsee could have also influenced human life in early Neolithic lake dwellings (5750-4750 cal. yr BP). While the first lake dwellings were constructed on wetlands, the later lake dwellings were built on piles in the water suggesting an early flood risk adaptation of humans and/or a general change of the Late Neolithic Culture of lake-dwellers because of socio-economic reasons. However, a direct relationship between the final abandonment of the lake dwellings and higher flood frequencies is not evidenced. N2 - Ein verstärktes Auftreten von Hochwassern, sowohl in ihrer Häufigkeit als auch in ihrer Frequenz, wird im Zuge der Klimaerwärmung und einer möglichen Intensivierung des hydrologischen Kreislaufs diskutiert. Die Kenntnis über die natürliche Variabilität von Hochwasserereignissen ist dabei eine grundlegende Voraussetzung, um die Hochwassergefahr für die Zukunft abschätzen zu können. Da instrumentelle Hochwasserzeitreihen meist nur die letzten 150 Jahre abbilden sind andere Methoden erforderlich, um das Auftreten von historischen und prä-historischen Hochwassern festzustellen. Jährlich laminierte (warvierte) Seesedimente sind bedeutende natürliche Archive, denn sie liefern kontinuierliche Zeitreihen > 10000 Jahre mit einer bis zur saisonalen Auflösung. Seebecken stellen natürliche Sedimentfallen dar, wobei eingetragenes Flusssediment in den Seesedimenten als eine distinkte detritische Lage aufgezeichnet wird, und daher zur Rekonstruktion von extremen Abflussereignissen genutzt werden. Im Rahmen meiner Doktorarbeit habe ich einen 8.50 m langen Sedimentkern aus dem Mondsee (Nordostalpen) untersucht, welcher die letzten 7000 Jahre abdeckt. Dieser Sedimentkern besteht aus Kalzitwarven und eingeschalteten detritischen Lagen mit einer Mächtigkeit von 0.05-32 mm. Detritische Lagen wurden mit Hilfe einer kombinierten Methode untersucht: Mikrofaziesanalyse, Rasterelektronenmikroskopie, Röntgenfluoreszenzanalyse (µXRF) und magnetische Suszeptibilität. Dieser Ansatz ermöglicht die Charakterisierung der einzelnen detritischen Lagen bezüglich der Eintragsprozesse und die Lokalisierung des Einzugsgebietes. Auf Grundlage der Warvenzählung und 14C Datierungen sind die wichtigsten Ziele dieser Arbeit: (i) die Identifizierung der Eintragsprozesse, welche zu einem Sedimenteintrag vom Einzugsgebiet bis in den See führen und (ii) die Rekonstruktion der Hochwasserfrequenz unter veränderten Klimabedingungen. Diese Arbeit zeigt eine Untersuchung auf verschiedenen Zeitscheiben, wobei instrumentelle und historische Daten genutzt werden, um die Aufzeichnung von pre-historischen Hochwasser in den Mondseesedimenten besser zu verstehen. Innerhalb der letzten 100 Jahre wurden zwölf Abflussereignisse aufgezeichnet. Zwei Typen von detritschen Lagen können anhand von Korngröße, geochemischer Zusammensetzung und des Verteilungsmusters unterschieden werden. Detritische Lagen, welche aus siliziklastischen und dolomitischen Material bestehen, zeigen eine Sedimentherkunft vom Teileinzugsgebiet des Flysch (nördliches Einzugsgebiet) und der Nördlichen Kalkalpen (südliches Teileinzugsgebiet) auf. Diese Lagen sind im Nördlichen Becken mächtiger (0.1-3.9 mm) als im südlichen Seebecken (0.05-1.6 mm). Detritische Lagen, welche nur aus dolomitischem Material bestehen und Turbititlagen aufzeigen (0.65-32 mm), weisen auf eine Herkunft aus den Nördlichen Kalkalpen hin. Im Vergleich mit instrumentellen Zeitreihen, stammen die mächtigeren Lagen von lokalen Murereignissen im Sommer und feinere Eintragslagen von regionalen Frühjahrs- und Sommerhochwassern. Extreme Sommerhochwasser am Mondsee werden hauptsächlich durch Zyklonen vom Mittelmeer ausgelöst, z.B. Juli 1954, Juli 1997 und August 2002. Die Untersuchung des langen Sedimentkerns vom Mondsee zeigt während der letzten 2000 Jahre signifikante Hochwasserintervalle mit dekadischen Hochwasserepisoden während der Völkerwanderungszeit und im Übergang vom Mittelalter in die Kleine Eiszeit. Dies weist auf eine Verknüpfung von Abkühlungsphasen und Sommerhochwassern im Nordostalpenraum hin. Während der Mittelalterlichen Wärmephase und in der Kleinen Eiszeit kam es jedoch zu einer geringeren Hochwasseraktivität. Dies zeigt einen komplexen Zusammenhang von Temperaturentwicklung und Hochwasseraktivität in den Nordostalpen, mit einer erhöhten Zyklonenaktivät in den Übergängen von wärmeren zu kälteren Phasen. Während der letzten 7000 Jahre wurden 47 Muren und 269 Hochwasser aufgezeichnet, wobei es eine signifikante Änderung mit erhöhter Häufigkeit um 3500 und 1500 Warvenjahre v. h. gab (v.h. = vor heute = AD 1950). Diese signifikante Änderung stimmt mit einem langfristigem Abkühlungstrend überein, welcher durch alpine Gletschervorstöße und das Absinken von Baumgrenzen seit etwa 3300 Warvenjahre v.h. berichtet wird. Trotz relativ geringer Hochwasseraktivität um 1500 Warvenjahre v.h., könnte das Auftreten von Hochwasser auch das Leben Menschen in Neolithischen Pfahlbausiedlungen (5750-4750 cal. yr BP) beeinflusst haben. Während die ersten Pfahlbauten noch als Feuchtbodensiedlungen am Land entstanden, wurden spätere Siedlungen eventuell als Anpassung an stark schwankenden Seewasserspiegeln auf Pfählen im Wasser gebaut und/oder zeigen eine allgemeine Veränderung der Siedlungsaktivitäten der Neolithischen Pfahlbaukultur an, aufgrund sozio-ökonomischer Veränderungen. Ein direkter Zusammenhang zwischen dem Verlassen der Pfahlbausiedlungen und einer erhöhten Hochwasseraktivität konnte jedoch nicht festgestellt werden. KW - Mondsee KW - Paläohochwasser KW - Seesedimente KW - Warven KW - Klimarekonstruktion KW - Mondsee KW - Paleofloods KW - Lake sediments KW - Warves KW - Climate reconstruction Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66702 ER - TY - THES A1 - Latnikova, Alexandra T1 - Polymeric capsules for self-healing anticorrosion coatings T1 - Polymerische Kapseln für selbstheilende Korrosionsschutzbeschichtungen N2 - The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of “good” and “poor” solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a “poor” solvent for the chosen polymer while compact morphologies are formed when the solvent is “good”. Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the “good” solvents would be located inside the sphere, while the “poor” ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the “in-situ” encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting “smart” self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests. N2 - In Anlehnung an den Selbstheilungsmechanismus der menschlichen Haut entwickeln wir ein innovatives Verfahren zur Funktionalisierung von Korrosionsschutzbeschichtungen, um auch diese in die Lage zu versetzen Beschädigungen selbstständig „auszuheilen“. Dazu werden winzige Mikro- und Nanobehälter mit aktiven Substanzen (z. B. Korrosionshemmstoffen, Versiegelungsmitteln, Bioziden etc.) befüllt und anschließend in eine Korrosionsschutzbeschichtung eingebettet. Kommt es nun im Zeitablauf zu korrosionsauslösenden Beschädigungen der Schutzbeschichtung (z. B. durch Kratzer oder Risse) werden an der Defektstelle die eingebetteten Behälter zerstört und aktiv wirkende Gegensubstanzen freigesetzt. Dadurch wird die verletzte Stelle sofort wieder verschlossen und die Korrosionsgefahr eliminiert. Der entscheidende Vorteil derart funktionalisierter Schutzbeschichtungen ist ihre aktive Rückkopplung mit dem Korrosionsauslöser: Die aktive Schutzsubstanz wird nur an der Defektstelle und nur in der zur Korrosionsvermeidung erforderlichen Menge freigegeben. Somit werden eine länger anhaltende Wirkdauer sowie eine deutlich höhere Nachhaltigkeit der Beschichtungen ermöglicht. Dieses „intelligente Verhalten“ der neuen aktiven Korrosionsschutzbeschichtungen ist nur dank ihrer innovativen Mikrostruktur möglich. Die winzigen Mikro- und Nanobehälter beinhalten nicht nur aktive Substanzen in ihrem Inneren sondern besitzen auch eine intelligent konstruierte Hüllenstruktur, deren Durchlässigkeit sich je nach Art des Korrosionsauslösers ändert. Wird die eingekapselte aktive Substanz freigesetzt, fängt diese sofort an gegen die korrosionsverursachenden Einflüsse zu wirken. Ist die Gefahr beseitigt verringert sich die Durchlässigkeit der Behälterhülle wieder. Diese bedingte Reversibilität zwischen geschlossenem und geöffnetem Zustand des Behälters sorgt für einen sehr sparsamen Verbrauch der aktiven Substanz und für die stark verbesserte Schutzwirkung darauf basierender Antikorrosionsbeschichtungen. Diese Arbeit befasst sich mit dem Aufbau polymerer Kern-Schale-Mikrokapseln, die entsprechende Korrosionsinhibitoren und Biocide enthalten. Der Morphologie wird für zahlreiche Lösungsmittel und Polymere mit Hilfe der Hansen-Löslichkeitsparameter in guter Übereinstimmung mit elektronenmikroskopischen Experimenten beschrieben. Die Wirkungsweise in technischen Beschichtungen wird quantifiziert anhand von elektrochemischer Impedanzspektroskopie, Rastervibrationssondenmessungen und industrienahen Testverfahren. KW - Korrosion KW - Selbstheilende Beschichtungen KW - Einkapselung KW - Morphologie von Kapseln KW - corrosion KW - self-healing coatings KW - encapsulation KW - capsule morphology Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60432 ER - TY - THES A1 - Scholz, Markus Reiner T1 - Spin polarization, circular dichroism, and robustness of topological surface states T1 - Spinpolarisation, Zirkulardichroismus und Robustheit Topologischer Oberflächenzustände BT - a photoemission study BT - eine Photoemissionsstudie N2 - Dreidimensionale topologische Isolatoren sind ein neues Materialsystem, welches dadurch charakterisiert ist, dass es in seinem Inneren isolierend an der Ober äche jedoch leitend ist. Ursächlich für die Leitfähigkeit an der Ober äche sind sogenannte topologische Ober- ächenzustände, welche das Valenzband des Inneren mit dem Leitungsband des Inneren verbinden. An der Ober äche ist also die Bandlücke, welche die isolierende Eigenschaft verursacht, geschlossen. Die vorliegende Arbeit untersucht diese Ober ächenzustände mittels spin- und winkelauf- gelöster Photoemissionsspektroskopie. Es wird gezeigt, dass in den Materialien Bi2Se3 und Bi2Te3, in übereinstimmung mit der Literatur, die entscheidenden Charakteristika eines topologischen Ober ächenzustands vorzu nden sind: Die Ober ächenzustände dieser Sys- teme durchqueren die Bandlücke in ungerader Anzahl, sie sind nicht entartet und weisen folgerichtig eine hohe Spinpolarisation auf. Weiterhin wird durch Aufdampfen diverser Adsorbate gezeigt, dass der Ober ächenzustän- de von Bi2Se3 und Bi2Te3, wie erwartet, extrem robust ist. Ober ächenzustände topologisch trivialer Systeme erfüllen diese Eigenschaft nicht; bereits kleine Verunreinigungen kön- nen diese Zustände zerstören, bzw. die Ober äche isolierend machen. Die topologischen Ober ächenzustände können in der vorliegenden Arbeit noch bis zur Detektionsgrenze der experimentellen Messmethode nachgewiesen werden und die Ober äche bleibt Leitfähig. Unter den Adsorbaten be ndet sich auch Eisen, ein bekanntermaßen magnetisches Materi- al. Eine der Grundvoraussetzungen für topologische Isolatoren ist die Zeitumkehrsymme- trie, die Elektronen, welche den topologischen Ober ächenzustand besetzen, vorschreibt, dass sie eine bestimmte Spinrichtung haben müssen, wenn sie sich beispielsweise nach links bewegen und den entgegengesetzten Spin wenn sie sich nach rechts bewegen. In magnetischen Materialien ist die Zeitumkehrsymmetrie jedoch explizit gebrochen und die gezeigte Robustheit des Ober ächenzustands gegen magnetische Materialien daher uner- wartet. Die Zeitumkehrsymmetrie sorgt auch dafür, dass eine Streuung der Elektronen um 180°, beispielsweise an einem Gitterdefekt oder an einem Phonon strikt verboten ist. Bei einem solchen Streuprozess bleibt die Spinrichtung erhalten, da aber in der Gegenrichtung nur Zustände mit entgegengesetztem Spin vorhanden sind kann das Elektron nicht in diese Richtung gestreut werden. Dieses Prinzip wird anhand der Lebensdauer der durch Pho- toemission angeregten Zustände untersucht. Hierbei wird gezeigt, dass die Kopplung der Elektronen des Ober ächenzustands von Bi2Te3 an Phononen unerwartet hoch ist und dass sich eine Anisotropie in der Bandstruktur des Selbigen auch in den Lebensdauern der ange- regten Zustände widerspiegelt. Weiterhin wird gezeigt, dass sich die Ein üsse von magne- tischen und nicht-magnetischen Verunreinigungen auf die Lebensdauern stark voneinander unterscheiden. Im letzten Teil der vorliegenden Arbeit wird untersucht, ob eine Asymmetrie in der Inten- sitätsverteilung der winkelaufgelösten Photoemissionsspektren, bei Anregung mit zirku- lar polarisiertem Licht, in Bi2Te3 Rückschlüsse auf die Spinpolarisation der Elektronen erlaubt. Bei Variation der Energie des eingestrahlten Lichts wird ein Vorzeichenwechsel der Asymmetrie beobachtet. Daraus lässt sich schlussfolgern, dass die Asymmetrie keine Rückschlüsse auf die Spinpolarisation erlaubt. N2 - This thesis is focussed on the electronic properties of the new material class named topological insulators. Spin and angle resolved photoelectron spectroscopy have been applied to reveal several unique properties of the surface state of these materials. The first part of this thesis introduces the methodical background of these quite established experimental techniques. In the following chapter, the theoretical concept of topological insulators is introduced. Starting from the prominent example of the quantum Hall effect, the application of topological invariants to classify material systems is illuminated. It is explained how, in presence of time reversal symmetry, which is broken in the quantum Hall phase, strong spin orbit coupling can drive a system into a topologically non trivial phase. The prediction of the spin quantum Hall effect in two dimensional insulators an the generalization to the three dimensional case of topological insulators is reviewed together with the first experimental realization of a three dimensional topological insulator in the Bi1-xSbx alloys given in the literature. The experimental part starts with the introduction of the Bi2X3 (X=Se, Te) family of materials. Recent theoretical predictions and experimental findings on the bulk and surface electronic structure of these materials are introduced in close discussion to our own experimental results. Furthermore, it is revealed, that the topological surface state of Bi2Te3 shares its orbital symmetry with the bulk valence band and the observation of a temperature induced shift of the chemical potential is to a high probability unmasked as a doping effect due to residual gas adsorption. The surface state of Bi2Te3 is found to be highly spin polarized with a polarization value of about 70% in a macroscopic area, while in Bi2Se3 the polarization appears reduced, not exceeding 50%. We, however, argue that the polarization is most likely only extrinsically limited in terms of the finite angular resolution and the lacking detectability of the out of plane component of the electron spin. A further argument is based on the reduced surface quality of the single crystals after cleavage and, for Bi2Se3 a sensitivity of the electronic structure to photon exposure. We probe the robustness of the topological surface state in Bi2X3 against surface impurities in Chapter 5. This robustness is provided through the protection by the time reversal symmetry. Silver, deposited on the (111) surface of Bi2Se3 leads to a strong electron doping but the surface state is observed up to a deposited Ag mass equivalent to one atomic monolayer. The opposite sign of doping, i.e., hole-like, is observed by exposing oxygen to Bi2Te3. But while the n-type shift of Ag on Bi2Se3 appears to be more or less rigid, O2 is lifting the Dirac point of the topological surface state in Bi2Te3 out of the valence band minimum at $\Gamma$. After increasing the oxygen dose further, it is possible to shift the Dirac point to the Fermi level, while the valence band stays well beyond. The effect is found reversible, by warming up the samples which is interpreted in terms of physisorption of O2. For magnetic impurities, i.e., Fe, we find a similar behavior as for the case of Ag in both Bi2Se3 and Bi2Te3. However, in that case the robustness is unexpected, since magnetic impurities are capable to break time reversal symmetry which should introduce a gap in the surface state at the Dirac point which in turn removes the protection. We argue, that the fact that the surface state shows no gap must be attributed to a missing magnetization of the Fe overlayer. In Bi2Te3 we are able to observe the surface state for deposited iron mass equivalents in the monolayer regime. Furthermore, we gain control over the sign of doping through the sample temperature during deposition. Chapter6 is devoted to the lifetime broadening of the photoemission signal from the topological surface states of Bi2Se3 and Bi2Te3. It is revealed that the hexagonal warping of the surface state in Bi2Te3 introduces an anisotropy for electrons traveling along the two distinct high symmetry directions of the surface Brillouin zone, i.e., $\Gamma$K and $\Gamma$M. We show that the phonon coupling strength to the surface electrons in Bi2Te3 is in nice agreement with the theoretical prediction but, nevertheless, higher than one may expect. We argue that the electron-phonon coupling is one of the main contributions to the decay of photoholes but the relatively small size of the Fermi surface limits the number of phonon modes that may scatter off electrons. This effect is manifested in the energy dependence of the imaginary part of the electron self energy of the surface state which shows a decay to higher binding energies in contrast to the monotonic increase proportional to E$^2$ in the Fermi liquid theory due to electron-electron interaction. Furthermore, the effect of the surface impurities of Chapter 5 on the quasiparticle life- times is investigated. We find that Fe impurities have a much stronger influence on the lifetimes as compared to Ag. Moreover, we find that the influence is stronger independently of the sign of the doping. We argue that this observation suggests a minor contribution of the warping on increased scattering rates in contrast to current belief. This is additionally confirmed by the observation that the scattering rates increase further with increasing silver amount while the doping stays constant and by the fact that clean Bi2Se3 and Bi2Te3 show very similar scattering rates regardless of the much stronger warping in Bi2Te3. In the last chapter we report on a strong circular dichroism in the angle distribution of the photoemission signal of the surface state of Bi2Te3. We show that the color pattern obtained by calculating the difference between photoemission intensities measured with opposite photon helicity reflects the pattern expected for the spin polarization. However, we find a strong influence on strength and even sign of the effect when varying the photon energy. The sign change is qualitatively confirmed by means of one-step photoemission calculations conducted by our collaborators from the LMU München, while the calculated spin polarization is found to be independent of the excitation energy. Experiment and theory together unambiguously uncover the dichroism in these systems as a final state effect and the question in the title of the chapter has to be negated: Circular dichroism in the angle distribution is not a new spin sensitive technique. KW - topological insulators KW - angle resolved photoelectron spectroscopy KW - spin resolved photoelectron spectroscopy KW - Bi2Se3 KW - Bi2Te3 KW - quasiparticle interactions KW - circular dichroism KW - spin-orbit coupling KW - time reversal symmetry KW - surface states KW - Spinpolarisation KW - Zirkulardichroismus KW - topologische Isolatoren KW - Oberflächenzustände KW - winkelaufgelöste Photoelektronenspektroskopie KW - spinaufgelöste Photoelektronenspektroskopie KW - Magnetismus KW - Bi2Te3 KW - Bi2Se3 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96686 ER - TY - THES A1 - Milke, Bettina T1 - Synthese von Metallnitrid- und Metalloxinitridnanopartikeln für energierelevante Anwendungen T1 - Synthesis of metal nitride and metal oxynitride nanoparticles for energy related applications N2 - Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie führt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter für Nanomaterialien. Allerdings führen bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kostengünstige und sichere Synthese würde die Möglichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Flüssigphasensynthese eingesetzt. Beide Synthesewege führen zu definierten Partikelgrößen und interessanten Morphologien und ermöglichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route führt diese zu Nanopartikeln mit Kern-Hülle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberflächen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazitäten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) übersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gewünschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und führt so zu gelben Zr2ON2-Nanopartikeln mit einer Größe d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln führt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel lässt neue Morphologien in Form von Nanostäbchen entstehen, die zu schuppenartigen sphärischen Überstrukturen agglomeriert sind. N2 - The development of new methods toward alternative clean energy production and efficient energy storage is a hot topic nowadays. In this context nanoscience has an important role to find suitable ways of increasing the efficiency of storage and production of energy of already known materials and new materials. However, until now the most well-known syntheses of MnN0,43 and Zr2ON2 nanoparticles lead to undefined particles. A simple, cheap and safe synthesis would offer the possibility of broader applications and scalability. We herein present the so-called urea-glass route which is used as a sol-gel process. This synthetic route leads to well-defined particle sizes, novel particle morphologies and allows the tailoring of the desired products. In the case of the synthesis of manganese nitride nanoparticles (MnN0,43), nanoparticles with a core-shell structure are obtained, their use as conversion materials in batteries is first introduced. On the other hand, the formation of zirconium oxynitride nanoparticles (Zr2ON2) can be easily influenced by varying the reaction conditions such as the amount of urea or the reaction temperature. The addition of small amounts of salt prevents the formation of carbon in the final product, leading to yellow Zr2ON2 nanoparticles with a size of d = 8 nm which show semiconductor behavior. KW - Nitride KW - Oxinitride KW - Nano KW - Li-Batterien KW - Harnstoff-Glas-Route KW - Nitrides KW - Oxynitrides KW - Nano KW - Li-batteries KW - Urea-Glas-Route Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60008 ER - TY - THES A1 - Morgenstern, Anne T1 - Thermokarst and thermal erosion : degradation of Siberian ice-rich permafrost T1 - Thermokarst und Thermoerosion : Degradation von sibirischem eisreichem Permafrost N2 - Current climate warming is affecting arctic regions at a faster rate than the rest of the world. This has profound effects on permafrost that underlies most of the arctic land area. Permafrost thawing can lead to the liberation of considerable amounts of greenhouse gases as well as to significant changes in the geomorphology, hydrology, and ecology of the corresponding landscapes, which may in turn act as a positive feedback to the climate system. Vast areas of the east Siberian lowlands, which are underlain by permafrost of the Yedoma-type Ice Complex, are particularly sensitive to climate warming because of the high ice content of these permafrost deposits. Thermokarst and thermal erosion are two major types of permafrost degradation in periglacial landscapes. The associated landforms are prominent indicators of climate-induced environmental variations on the regional scale. Thermokarst lakes and basins (alasses) as well as thermo-erosional valleys are widely distributed in the coastal lowlands adjacent to the Laptev Sea. This thesis investigates the spatial distribution and morphometric properties of these degradational features to reconstruct their evolutionary conditions during the Holocene and to deduce information on the potential impact of future permafrost degradation under the projected climate warming. The methodological approach is a combination of remote sensing, geoinformation, and field investigations, which integrates analyses on local to regional spatial scales. Thermokarst and thermal erosion have affected the study region to a great extent. In the Ice Complex area of the Lena River Delta, thermokarst basins cover a much larger area than do present thermokarst lakes on Yedoma uplands (20.0 and 2.2 %, respectively), which indicates that the conditions for large-area thermokarst development were more suitable in the past. This is supported by the reconstruction of the development of an individual alas in the Lena River Delta, which reveals a prolonged phase of high thermokarst activity since the Pleistocene/Holocene transition that created a large and deep basin. After the drainage of the primary thermokarst lake during the mid-Holocene, permafrost aggradation and degradation have occurred in parallel and in shorter alternating stages within the alas, resulting in a complex thermokarst landscape. Though more dynamic than during the first phase, late Holocene thermokarst activity in the alas was not capable of degrading large portions of Pleistocene Ice Complex deposits and substantially altering the Yedoma relief. Further thermokarst development in existing alasses is restricted to thin layers of Holocene ice-rich alas sediments, because the Ice Complex deposits underneath the large primary thermokarst lakes have thawed completely and the underlying deposits are ice-poor fluvial sands. Thermokarst processes on undisturbed Yedoma uplands have the highest impact on the alteration of Ice Complex deposits, but will be limited to smaller areal extents in the future because of the reduced availability of large undisturbed upland surfaces with poor drainage. On Kurungnakh Island in the central Lena River Delta, the area of Yedoma uplands available for future thermokarst development amounts to only 33.7 %. The increasing proximity of newly developing thermokarst lakes on Yedoma uplands to existing degradational features and other topographic lows decreases the possibility for thermokarst lakes to reach large sizes before drainage occurs. Drainage of thermokarst lakes due to thermal erosion is common in the study region, but thermo-erosional valleys also provide water to thermokarst lakes and alasses. Besides these direct hydrological interactions between thermokarst and thermal erosion on the local scale, an interdependence between both processes exists on the regional scale. A regional analysis of extensive networks of thermo-erosional valleys in three lowland regions of the Laptev Sea with a total study area of 5,800 km² found that these features are more common in areas with higher slopes and relief gradients, whereas thermokarst development is more pronounced in flat lowlands with lower relief gradients. The combined results of this thesis highlight the need for comprehensive analyses of both, thermokarst and thermal erosion, in order to assess past and future impacts and feedbacks of the degradation of ice-rich permafrost on hydrology and climate of a certain region. N2 - Die gegenwärtige Klimaerwärmung wirkt sich auf arktische Regionen stärker aus als auf andere Gebiete der Erde. Das hat weitreichende Konsequenzen für Permafrost, der weite Teile der terrestrischen Arktis unterlagert. Das Tauen von Permafrost kann zur Freisetzung erheblicher Mengen an Treibhausgasen sowie zu gravierenden Änderungen in der Geomorphologie, Hydrologie und Ökologie betroffener Landschaften führen, was wiederum als positive Rückkopplung auf das Klimasystem wirken kann. Ausgedehnte Gebiete der ostsibirischen Tiefländer, die mit Permafrost des Yedoma Eiskomplex unterlagert sind, gelten aufgrund des hohen Eisgehalts dieser Permafrostablagerungen als besonders empfindlich gegenüber Klimaerwärmungen. Thermokarst und Thermoerosion sind zwei Hauptformen der Permafrostdegradation in periglazialen Landschaften. Die zugehörigen Landschaftsformen sind auf der regionalen Skala bedeutende Indikatoren klimainduzierter Umweltvariationen. Thermokarstseen und senken (Alasse) sowie Thermoerosionstäler sind in den Küstentiefländern der Laptewsee weit verbreitet. Die vorliegende Dissertation untersucht die räumliche Verbreitung und die morphometrischen Eigenschaften dieser Degradationsformen mit dem Ziel, ihre Entwicklungsbedingungen während des Holozäns zu rekonstruieren und Hinweise auf potenzielle Auswirkungen zukünftiger Permafrostdegradation im Zuge der erwarteten Klimaerwärmung abzuleiten. Der methodische Ansatz ist eine Kombination aus Fernerkundungs-, Geoinformations- und Geländeuntersuchungen, die Analysen auf lokalen bis regionalen räumlichen Skalen integriert. Thermokarst und Thermoerosion haben die Untersuchungsregion tiefgreifend geprägt. Im Eiskomplexgebiet des Lena-Deltas nehmen Thermokarstsenken eine weitaus größere Fläche ein als Thermokarstseen auf Yedoma-Hochflächen (20,0 bzw. 2,2 %), was darauf hin deutet, dass die Bedingungen für die Entwicklung von großflächigem Thermokarst in der Vergangenheit wesentlich günstiger waren als heute. Die Rekonstruktion der Entwicklung eines einzelnen Alas im Lena-Delta belegt eine andauernde Phase hoher Thermokarstaktivität seit dem Übergang vom Pleistozän zum Holozän, die zur Entstehung einer großen und tiefen Senke führte. Nach der Drainage des primären Thermokarstsees im mittleren Holozän erfolgten Permafrostaggradation und degradation parallel und in kürzeren abwechselnden Etappen innerhalb des Alas und führten zu einer komplexen Thermokarstlandschaft. Trotzdem die spätholozäne Thermokarstentwicklung im Alas dynamischer ablief als die erste Entwicklungsphase, resultierte sie nicht in der Degradation großer Teile pleistozäner Eiskomplexablagerungen und einer wesentlichen Veränderung des Yedoma-Reliefs. Weitere Thermokarstentwicklung in bestehenden Alassen ist begrenzt auf geringmächtige Lagen holozäner eisreicher Alas-Sedimente, da die Eiskomplexablagerungen unter den großen primären Thermokarstseen vollständig getaut waren und die unterlagernden Sedimente aus eisarmen, fluvialen Sanden bestehen. Thermokarstprozesse auf ungestörten Yedoma-Hochflächen wirken am stärksten verändernd auf Eiskomplexablagerungen, werden aber in Zukunft auf geringere Ausmaße begrenzt sein, da die Verfügbarkeit großer ungestörter, schwach drainierter Yedoma-Hochflächen abnimmt. Auf der Insel Kurungnakh im zentralen Lena-Delta beträgt der für zukünftige Thermokarstentwicklung verfügbare Anteil an Yedoma-Hochflächen nur 33,7 %. Die zunehmende Nähe von sich entwickelnden Thermokarstseen auf Yedoma-Hochflächen zu bestehenden Degradationsstrukturen und anderen negativen Reliefformen verringert die Möglichkeit der Thermokarstseen, große Ausmaße zu erreichen bevor sie drainieren. Die Drainage von Thermokarstseen durch Thermoerosion ist in der Untersuchungsregion weit verbreitet, aber Thermoerosionstäler versorgen Thermokarstseen und –senken auch mit Wasser. Neben diesen direkten hydrologischen Wechselwirkungen zwischen Thermokarst und Thermoerosion auf der lokalen Ebene existiert auch eine Interdependenz zwischen beiden Prozessen auf der regionalen Ebene. Eine regionale Analyse weitreichender Netze von Thermoerosionstälern in drei Tieflandgebieten der Laptewsee mit einer Fläche von insgesamt 5800 km² zeigte, dass diese Formen häufiger in Gebieten mit höheren Geländeneigungen und Reliefgradienten auftreten, während Thermokarstentwicklung stärker in flachen Tiefländern mit geringeren Reliefgradienten ausgeprägt ist. Die kombinierten Ergebnisse dieser Dissertation zeigen die Notwendigkeit von umfassenden Analysen beider Prozesse und Landschaftsformen, Thermokarst und Thermoerosion, im Hinblick auf die Abschätzung vergangener und zukünftiger Auswirkungen der Degradation eisreichen Permafrosts auf Hydrologie und Klima der betrachteten Region und deren Rückkopplungen. KW - Fernerkundung KW - GIS KW - räumliche Analyse KW - periglaziale Landschaften KW - Arktis KW - remote sensing KW - GIS KW - spatial analyses KW - periglacial landscapes KW - Arctic Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62079 ER - TY - THES A1 - Borisova, Dimitriya T1 - Feedback active coatings based on mesoporous silica containers T1 - Rückkopplungsaktive Beschichtungen basierend auf mesoporösen Silika-Behältern N2 - Metalle werden oft während ihrer Anwendung korrosiven Bedingungen ausgesetzt, was ihre Alterungsbeständigkeit reduziert. Deswegen werden korrosionsanfällige Metalle, wie Aluminiumlegierungen mit Schutzbeschichtungen versehen, um den Korrosionsprozess aktiv oder passiv zu verhindern. Die klassischen Schutzbeschichtungen funktionieren als physikalische Barriere zwischen Metall und korrosiver Umgebung und bieten einen passiven Korrosionsschutz nur, wenn sie unbeschädigt sind. Im Gegensatz dazu kann die Korrosion auch im Fall einer Beschädigung mittels aktiver Schutzbeschichtungen gehemmt werden. Chromathaltige Beschichtungen bieten heutzutage den besten aktiven Korrosionsschutz für Aluminiumlegierungen. Aufgrund ihrer Giftigkeit wurden diese weltweit verboten und müssen durch neue umweltfreundliche Schutzbeschichtungen ersetzt werden. Ein potentieller Ersatz sind Schutzbeschichtungen mit integrierten Nano- und Mikrobehältern, die mit ungiftigem Inhibitor gefüllt sind. In dieser Arbeit werden die Entwicklung und Optimierung solcher aktiver Schutzbeschichtungen für die industriell wichtige Aluminiumlegierung AA2024-T3 dargestellt Mesoporöse Silika-Behälter wurden mit dem ungiftigen Inhibitor (2-Mercaptobenzothiazol) beladen und dann in die Matrix anorganischer (SiOx/ZrOx) oder organischer (wasserbasiert) Schichten dispergiert. Zwei Sorten von Silika-Behältern mit unterschiedlichen Größen (d ≈ 80 and 700 nm) wurden verwendet. Diese haben eine große spezifische Oberfläche (≈ 1000 m² g-1), eine enge Porengrößenverteilung mit mittlerer Porenweite ≈ 3 nm und ein großes Porenvolumen (≈ 1 mL g-1). Dank dieser Eigenschaften können große Inhibitormengen im Behälterinneren adsorbiert und gehalten werden. Die Inhibitormoleküle werden bei korrosionsbedingter Erhöhung des pH-Wertes gelöst und freigegeben. Die Konzentration, Position und Größe der integrierten Behälter wurden variiert um die besten Bedingungen für einen optimalen Korrosionsschutz zu bestimmen. Es wurde festgestellt, dass eine gute Korrosionsschutzleistung durch einen Kompromiss zwischen ausreichender Inhibitormenge und guten Barriereeigenschaften hervorgerufen wird. Diese Studie erweitert das Wissen über die wichtigsten Faktoren, die den Korrosionsschutz beeinflussen. Somit wurde die Entwicklung effizienter, aktiver Schutzbeschichtungen ermöglicht, die auf mit Inhibitor beladenen Behältern basieren. N2 - Metals are often used in environments that are conducive to corrosion, which leads to a reduction in their mechanical properties and durability. Coatings are applied to corrosion-prone metals such as aluminum alloys to inhibit the destructive surface process of corrosion in a passive or active way. Standard anticorrosive coatings function as a physical barrier between the material and the corrosive environment and provide passive protection only when intact. In contrast, active protection prevents or slows down corrosion even when the main barrier is damaged. The most effective industrially used active corrosion inhibition for aluminum alloys is provided by chromate conversion coatings. However, their toxicity and worldwide restriction provoke an urgent need for finding environmentally friendly corrosion preventing systems. A promising approach to replace the toxic chromate coatings is to embed particles containing nontoxic inhibitor in a passive coating matrix. This work presents the development and optimization of effective anticorrosive coatings for the industrially important aluminum alloy, AA2024-T3 using this approach. The protective coatings were prepared by dispersing mesoporous silica containers, loaded with the nontoxic corrosion inhibitor 2-mercaptobenzothiazole, in a passive sol-gel (SiOx/ZrOx) or organic water-based layer. Two types of porous silica containers with different sizes (d ≈ 80 and 700 nm, respectively) were investigated. The studied robust containers exhibit high surface area (≈ 1000 m² g-1), narrow pore size distribution (dpore ≈ 3 nm) and large pore volume (≈ 1 mL g-1) as determined by N2 sorption measurements. These properties favored the subsequent adsorption and storage of a relatively large amount of inhibitor as well as its release in response to pH changes induced by the corrosion process. The concentration, position and size of the embedded containers were varied to ascertain the optimum conditions for overall anticorrosion performance. Attaining high anticorrosion efficiency was found to require a compromise between delivering an optimal amount of corrosion inhibitor and preserving the coating barrier properties. This study broadens the knowledge about the main factors influencing the coating anticorrosion efficiency and assists the development of optimum active anticorrosive coatings doped with inhibitor loaded containers. KW - Korrosion KW - Beschichtungen KW - Aluminiumlegierung KW - Silika KW - Nanopartikel KW - mesoporös KW - corrosion KW - coating KW - aluminum alloy KW - silica nanoparticles KW - mesoporous Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63505 ER -