TY - THES A1 - Schimpf, Stefan T1 - Herkunft und Ablagerungsmilieu quartärer Sedimente im Einzugsgebiet des Heihe, NW China N2 - Der zentralasiatische Naturraum, wie er sich uns heute präsentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren über Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stoffflüsse auch kurzfristig ändern und dabei das Gesicht der Landschaft verwandeln können. Die Gobi-Wüste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftsprägenden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung gerückt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und äolischer Sedimente stellt sie eine bedeutende Lokalität zur Rekonstruktion von lokalen und regionalen Stoffflüssen dar.. Andererseits ist die Gobi-Wüste zugleich auch eine bedeutende Quelle für den überregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien – Monsundynamik & Geoökosysteme (Förderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden für eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberflächenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, ergänzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe Wünnemann (2005)) abgeteuft, um weit reichende, ergänzende Informationen zur Landschaftsgeschichte und zum überregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stoffflüsse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Klärung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und möglichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Geländebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. Für die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegenübergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberflächensedimente ergibt für das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und ähnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngrößen mit zunehmender Entfernung vom Qilian Shan hin und ermöglichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den Dünensanden, den Stillwassersedimenten und Stäuben. Diese Ergebnisse können als Interpretationsgrundlage für die Korngrößenanalysen des Bohrkerns genutzt werden. Somit ist es möglich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuhängen. Für das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zurückreichen. Während dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivitäts- und Stabilitätsphasen zu einer kontinuierlichen Progradation und Überprägung des Schwemmfächers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, während der es aufgrund zunehmender fluvialer Aktivitäten zu einer deutlich verstärkten Schwemmfächerdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem äolische Prozesse, die zu einer Überprägung des Schwemmfächers geführt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilität. Dies spiegelt die enorme Heterogenität der Geologie des Untersuchungsgebietes wider, wodurch die räumlichen Signale nicht sehr stark ausgeprägt sind. Dennoch, können für das Einzugsgebiet drei größere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das östliche Qilian Shan Vorland zeichnet sich dabei durch deutlich höhere Chloritgehalte als primäre Quelle für die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das östliche Qilian Shan Vorland als primäre Quelle für die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Grünschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verhältnis eine große Variabilität innerhalb des Einzugsgebietes an. Auch hier ist es das östliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilität der Sedimentherkunft lässt sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen Änderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgeprägt, wie es die Quellsignale in den Oberflächensedimenten vermuten lassen. Ein Grund dafür scheint die starke Vermischung unterschiedlichster Sedimente während des Transportes zu sein. Die Kombination der Korngrößenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit überwiegend äolischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verhältnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben ermöglicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich größere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem können mit dieser Methode auch chemische Varietäten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer möglichen Sedimentherkunft ermöglichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abhängen. Die Heterogenität der Geologie und die Größe des Einzugsgebietes sowie die daraus resultierende Komplexität der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer ergänzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberflächenbeprobung zur feineren Auflösung von lokalen Sedimentquellen. N2 - The Central Asian natural space, as it presents itself today, is the result of a combination of many different factors over millions of years. However, in the current context of climate change it becoming obvious how strongly material fluxes can change in the short-term and thereby transform the face of the landscape. As a large long-term archive of different fluvial, lacustrine and aeolian sediments, the Gobi Desert in Inner Mongolia (China) represents a significant locality for the reconstruction of local and regional material flows as well as an important source for supra-regional dust transport due to erosion by aeolian processes. This, in connection with its location to the Tibetan Plateau, has moved the Gobi Desert into the focus of climate-historical basic research. Against this background, several German-Chinese expeditions to Ejina Basin (Inner Mongolia) and the Qilian Shan foreland were accomplished between 2011 and 2014. They were part of the BMBF joint program WTZ Central Asia - Monsoon Dynamics & Geo-Ecosystems (Grant No. 03G0814). In the course of these expeditions numerous surface samples from the entire catchment area of the Heihe (Black River) were collected for the determination of potential sediment sources. Additionally, two drillings in the interior of the Ejina Basin were conducted as a continuation of the existing drill-core D100 (see Wünnemann (2005)) and for gathering complementary information on landscape history and supra-regional sediment transfer. The goals of this doctoral thesis are a sedimentological-mineralogical characterization of the study area with regard to potential sediment sources and material fluxes of the Ejina Basin as well as the reconstruction of the sedimentation history of a 19 m sediment drill-core (GN100) drilled in the northern part of the basin. The main focus is on the clarification of the sediment provenance within the drill core as well as the designation of provenance signals and possible sediment sources or sediment transport paths. The methodological approach is based on a multi-proxy approach to characterize the clastic sedimentary facies using field observations, lithological-granulometric and mineralogical-geochemical analyses as well as statistical methods. For the mineralogical investigations of the sediments, a new scanning electron microscopic method for automated particle analysis was used and compared with traditional methods. The synoptic analysis of the granulometric, geochemical and mineralogical findings of the surface sediments result in a logical cascade model with recurring process areas and similar process signals. The results of the extensive granulometric analyses indicate decreasing grain sizes as the distance from the Qilian Shan increases and allow the identification of four textural signals: fluvial sands, dune sands, still water sediments and dusts. They can be used as the basis of interpretation for the grain size analyses of the drill core. This makes it possible to reconstruct the depositional history of the core sediments and to put them in an overall context in conjunction with own and literature-based datings. For the study area four depositional phases can be identified which date back until the time of the Last Glacial Maximum (LGM). During these depositional phases, various phases of activity and stability led to a continuous progradation and overprinting of the alluvial fan. A particularly active phase can be observed between 8 ka and 4 ka BP. During this period there seems to have been a significant increase in alluvial fan dynamics due to increasing fluvial activity. In the periods before and after mainly aeolian processes have led to an overprinting of the alluvial fan. Regarding the mineralogical provenance signals there is a great variability. This reflects the enormous geological heterogeneity of the study area, by which the spatial signals are not very pronounced. Nonetheless, within the catchment three larger areas can be declared which can be considered as possible sediment sources. These are the eastern and western foreland of the Qilian Shan mountains as wells as the Bei Shan in the west of the Ejina basin. They differ, in particular, from strongly diverging chlorite contents in the clay mineral and total mineral fraction. The eastern Qilian Shan foreland is characterized by significantly higher chlorite contents as the primary source for the sediments in the Ejina Basin. This is related to the greenschists, ophiolites and serpentinites in this area. Geochemically, the Cr/Rb-ratio in particular indicates a large variability within the catchment area. In this case its again the eastern Qilian Shan foreland which stands out from the rest of the study area with high values due to its high proportion of mafic rocks which are rich in chromites and spinels. Within the drill core sediments of GN100 the temporal but also the general variability of the sediment provenance according to the surface sediment results cannot be clearly traced. The mineralogical-sedimentological characteristics of the drilled clastic sediments exhibit meantime changes in sediment provenance. However, they are not as pronounced as the source signals within the surface sediments suggest. One reason seems to be the strong mixing of different sediments during transport. The combination of the particle size results with the results of the total and heavy mineralogy indicate that there must have been a phase in the meantime with predominantly aeolian processes.. These processes were connected with a sediment input from the Bei Shan mountains in the west. In addition to the increase in ultrastable heavy minerals such as zirconium and garnet and the decline of opaque heavy minerals, mainly present conditions point to this. The comparison of the traditional heavy mineral analysis (polarized light microscopy) with computer-controlled scanning electron microscopy (short: CCSEM) shows the clear advantage of the modern analysis method. Above all is the significant greater statistical significance of the counting results. In addition, this method can also be used to determine chemical varieties of some heavy minerals, which allows an even finer classification and more reliable conclusions about a possible sediment provenance. Furthermore, better statements can be made about the composition and the development process of the deposited sediments. This thesis shows that the sediment provenance within the study area as well as the ongoing processes partly depend strongly on local conditions. Therefore, the heterogeneity of the geology and the size of the catchment as well as the resulting complexity of the sediment genesis makes it very difficult to make exact assignments to clearly defined sediment sources. Nevertheless, the results indicate a primary input of fluvial clastic sediments of the Heihe coming from the Qilian Shan mountains. However, the findings also indicate the need to complement the study with adjacent study areas such as the Gobi Altai in the north or the Beishan in the west as well as a densification of the surface sampling for a better resolution of possible local sediment sources. KW - Heihe KW - Ejina Becken KW - Gaxun Nur KW - Schwerminerale KW - China KW - CCSEM KW - Herkunftsanalyse KW - Tonminerale KW - Heihe KW - Ejina Basin KW - Gaxun Nur KW - Heavy Minerals KW - China KW - CCSEM KW - Provenance Analysis KW - Clay Minerals Y1 - 2020 ER - TY - JOUR A1 - Tofelde, Stefanie A1 - Bufe, Aaron A1 - Turowski, Jens M. T1 - Hillslope Sediment Supply Limits Alluvial Valley Width JF - AGU Advances N2 - River-valley morphology preserves information on tectonic and climatic conditions that shape landscapes. Observations suggest that river discharge and valley-wall lithology are the main controls on valley width. Yet, current models based on these observations fail to explain the full range of cross-sectional valley shapes in nature, suggesting hitherto unquantified controls on valley width. In particular, current models cannot explain the existence of paired terrace sequences that form under cyclic climate forcing. Paired river terraces are staircases of abandoned floodplains on both valley sides, and hence preserve past valley widths. Their formation requires alternating phases of predominantly river incision and predominantly lateral planation, plus progressive valley narrowing. While cyclic Quaternary climate changes can explain shifts between incision and lateral erosion, the driving mechanism of valley narrowing is unknown. Here, we extract valley geometries from climatically formed, alluvial river-terrace sequences and show that across our dataset, the total cumulative terrace height (here: total valley height) explains 90%–99% of the variance in valley width at the terrace sites. This finding suggests that valley height, or a parameter that scales linearly with valley height, controls valley width in addition to river discharge and lithology. To explain this valley-width-height relationship, we reformulate existing valley-width models and suggest that, when adjusting to new boundary conditions, alluvial valleys evolve to a width at which sediment removal from valley walls matches lateral sediment supply from hillslope erosion. Such a hillslope-channel coupling is not captured in current valley-evolution models. Our model can explain the existence of paired terrace sequences under cyclic climate forcing and relates valley width to measurable field parameters. Therefore, it facilitates the reconstruction of past climatic and tectonic conditions from valley topography. Y1 - 2022 U6 - https://doi.org/10.1029/2021AV000641 SN - 2576-604X PB - American Geophysical Union (AGU); Wiley CY - Hoboken, New Jersey, USA ER - TY - THES A1 - Lenz, Josefine T1 - Thermokarst dynamics in central-eastern Beringia T1 - Thermokarstdynamik im zentral-östlichen Beringia BT - insights from permafrost and lacustrine sediment cores BT - Einblicke durch Permafrost- und Seesedimentkerne N2 - Widespread landscape changes are presently observed in the Arctic and are most likely to accelerate in the future, in particular in permafrost regions which are sensitive to climate warming. To assess current and future developments, it is crucial to understand past environmental dynamics in these landscapes. Causes and interactions of environmental variability can hardly be resolved by instrumental records covering modern time scales. However, long-term environmental variability is recorded in paleoenvironmental archives. Lake sediments are important archives that allow reconstruction of local limnogeological processes as well as past environmental changes driven directly or indirectly by climate dynamics. This study aims at reconstructing Late Quaternary permafrost and thermokarst dynamics in central-eastern Beringia, the terrestrial land mass connecting Eurasia and North America during glacial sea-level low stands. In order to investigate development, processes and influence of thermokarst dynamics, several sediment cores from extant lakes and drained lake basins were analyzed to answer the following research questions: 1. When did permafrost degradation and thermokarst lake development take place and what were enhancing and inhibiting environmental factors? 2. What are the dominant processes during thermokarst lake development and how are they reflected in proxy records? 3. How did, and still do, thermokarst dynamics contribute to the inventory and properties of organic matter in sediments and the carbon cycle? Methods applied in this study are based upon a multi-proxy approach combining sedimentological, geochemical, geochronological, and micropaleontological analyses, as well as analyses of stable isotopes and hydrochemistry of pore-water and ice. Modern field observations of water quality and basin morphometrics complete the environmental investigations. The investigated sediment cores reveal permafrost degradation and thermokarst dynamics on different time scales. The analysis of a sediment core from GG basin on the northern Seward Peninsula (Alaska) shows prevalent terrestrial accumulation of yedoma throughout the Early to Mid Wisconsin with intermediate wet conditions at around 44.5 to 41.5 ka BP. This first wetland development was terminated by the accumulation of a 1-meter-thick airfall tephra most likely originating from the South Killeak Maar eruption at 42 ka BP. A depositional hiatus between 22.5 and 0.23 ka BP may indicate thermokarst lake formation in the surrounding of the site which forms a yedoma upland till today. The thermokarst lake forming GG basin initiated 230 ± 30 cal a BP and drained in Spring 2005 AD. Four years after drainage the lake talik was still unfrozen below 268 cm depth. A permafrost core from Mama Rhonda basin on the northern Seward Peninsula preserved a full lacustrine record including several lake phases. The first lake generation developed at 11.8 cal ka BP during the Lateglacial-Early Holocene transition; its old basin (Grandma Rhonda) is still partially preserved at the southern margin of the study basin. Around 9.0 cal ka BP a shallow and more dynamic thermokarst lake developed with actively eroding shorelines and potentially intermediate shallow water or wetland phases (Mama Rhonda). Mama Rhonda lake drainage at 1.1 cal ka BP was followed by gradual accumulation of terrestrial peat and top-down refreezing of the lake talik. A significant lower organic carbon content was measured in Grandma Rhonda deposits (mean TOC of 2.5 wt%) than in Mama Rhonda deposits (mean TOC of 7.9 wt%) highlighting the impact of thermokarst dynamics on biogeochemical cycling in different lake generations by thawing and mobilization of organic carbon into the lake system. Proximal and distal sediment cores from Peatball Lake on the Arctic Coastal Plain of Alaska revealed young thermokarst dynamics since about 1,400 years along a depositional gradient based on reconstructions from shoreline expansion rates and absolute dating results. After its initiation as a remnant pond of a previous drained lake basin, a rapidly deepening lake with increasing oxygenation of the water column is evident from laminated sediments, and higher Fe/Ti and Fe/S ratios in the sediment. The sediment record archived characterizing shifts in depositional regimes and sediment sources from upland deposits and re-deposited sediments from drained thaw lake basins depending on the gradually changing shoreline configuration. These changes are evident from alternating organic inputs into the lake system which highlights the potential for thermokarst lakes to recycle old carbon from degrading permafrost deposits of its catchment. The lake sediment record from Herschel Island in the Yukon (Canada) covers the full Holocene period. After its initiation as a thermokarst lake at 11.7 cal ka BP and intense thermokarst activity until 10.0 cal ka BP, the steady sedimentation was interrupted by a depositional hiatus at 1.6 cal ka BP which likely resulted from lake drainage or allochthonous slumping due to collapsing shore lines. The specific setting of the lake on a push moraine composed of marine deposits is reflected in the sedimentary record. Freshening of the maturing lake is indicated by decreasing electrical conductivity in pore-water. Alternation of marine to freshwater ostracods and foraminifera confirms decreasing salinity as well but also reflects episodical re-deposition of allochthonous marine sediments. Based on permafrost and lacustrine sediment records, this thesis shows examples of the Late Quaternary evolution of typical Arctic permafrost landscapes in central-eastern Beringia and the complex interaction of local disturbance processes, regional environmental dynamics and global climate patterns. This study confirms that thermokarst lakes are important agents of organic matter recycling in complex and continuously changing landscapes. N2 - Derzeit werden deutliche Landschaftsveränderungen in der Arktis beobachtet, welche sich höchstwahrscheinlich zukünftig v.a. in den Permafrostregionen verstärken, da diese besonders empfindlich auf Klimaveränderungen reagieren. Um derzeitige und zukünftige Entwicklungen einschätzen zu können, ist es wichtig vergangene Umweltprozesse zu verstehen. Ursachen und Wechselwirkungen von Umweltveränderungen können nur bedingt durch instrumentelle Aufzeichnungen erklärt werden, doch Paleo-Umweltarchive können weit in die Vergangenheit reichende Umweltdynamiken aufzeichnen. Seesedimente sind wichtige Archive, die lokale limnogeologische Prozesse, aber auch direkt oder indirekt klimatisch gesteuerte Umweltveränderungen der Vergangenheit aufzeichnen. Ziel der vorliegenden Arbeit ist es, spätquartäre Permafrost- und Thermokarstdynamik im zentral-östlichen Beringia zu rekonstruieren. Beringia umfasst jene terrestrische Landmasse, welche Eurasien und Nord-Amerika zu Zeiten von Meeresspiegeltiefständen verband. Um die Entwicklung, die Prozesse und den Einfluss von Thermokarstdynamik zu untersuchen, wurden mehrere Sedimentkerne von rezenten Seen und ausgelaufenen Seebecken analysiert, um folgende Forschungsfragen zu beantworten: 1. Zu welcher Zeit degradierte Permafrost und wann entwickelten sich Thermokarstseen? Was waren hemmende oder verstärkende Faktoren? 2. Was sind dominierende Prozesse während der Entwicklung von Thermokarstseen und wie spiegeln sich diese in Proxy-Aufzeichnungen wieder? 3. Wie hat Thermokarstdynamik damals und heute zur Bedeutung von organischer Substanz in Sedimenten und im Kohlenstoffkreislauf beigetragen? Die in dieser Arbeit angewandten Methoden basieren auf einem sogenannten „multi-proxy“ Ansatz, der sedimentologische, geochemische, geochronologische und mikropaläontologische Analysen, sowie die Untersuchung von stabilen Isotopen und die Hydrochemie von Porenwasser und -eis, verbindet. Feldmessungen der modernen Wasserqualität und Beckenmorphometrie komplettieren die Umweltuntersuchungen. Auf Grundlage der untersuchten Sedimentkerne lässt sich die Degradation von Permafrost und die Dynamik von Thermokarst auf zeitlich verschiedenen Skalen rekonstruieren. Die Analyse eines Sedimentkerns vom GG-Becken auf der nördlichen Seward-Halbinsel (Alaska) zeigt eine vorwiegend terrestrische Akkumulation von Yedoma während des Früh- und Mittel-Wisconsin mit zwischenzeitlich feuchteren Verhältnissen zwischen 44,5 und 41,5 ka BP. Diese frühe Feuchtgebietsphase wurde durch die Akkumulation einer 1 m dicken Tephra-Lage beendet, welche sehr wahrscheinlich von der Eruption des heutigen South Killeak Maar vor etwa 42.000 Jahren stammt. Eine Schichtlücke im Sedimentkern von etwa 22,5 und 0,23 ka BP gibt einen Hinweis auf Thermokarstentwicklung in der Umgebung der Kernlokation, welche bis heute ein Yedoma-Rudiment bildet. Der Thermokarstsee, der GG-Becken formte, entstand 230 ± 30 cal a BP und drainierte im Frühling 2005 AD. Vier Jahre nach der Drainage war der Talik des Sees in einer Tiefe von 268 cm noch ungefroren. Ein Permafrostkern vom Mama Rhonda-Becken auf der nördlichen Seward-Halbinsel archivierte eine vollständige limnische Fazies mit mehreren Seephasen. Die erste Seegeneration entstand am Übergang vom Spätglazial zum Frühholozän um etwa 11,8 cal ka BP; das alte Seebecken (Grandma Rhonda) ist bis heute südlich der Kernlokation erhalten. Etwa um 9,0 cal ka BP entwickelte sich ein eher flaches und dynamisches Seesystem mit aktiv erodierenden Ufern und potenziell zwischengeschalteten Flachwasser- oder Feuchtgebietsphasen (Mama Rhonda). Die Drainage vom Mama Rhonda-See etwa 1,1 cal ka BP wurde gefolgt von gradueller Torfakkumulation und einem von oben zurückfrierenden See-Talik Es wurde ein deutlich geringerer organischer Kohlenstoff-Gehalt in Grandma Rhonda-Ablagerungen (TOC im Mittel 2,5 Gew.-%) festgestellt, als in Mama Rhonda Ablagerungen (TOC im Mittel 7,9 Gew.-%). Dies zeigt den bedeutenden Einfluss von Thermokarst auf biogeochemische Kreisläufe, da in verschiedenen Seegenerationen organischen Kohlenstoff durch Permafrost-Tauen im Seesystem mobilisiert wird. Seesedimentkerne aus der Uferzone und dem zentralen Bereich von Peatball Lake auf der Arktischen Küstenebene von Alaska, ergaben eine junge Thermokarstdynamik von 1.400 Jahren, welche auf der Basis von absoluten Datierungen und Uferexpansionsraten rekonstruiert wurde. Nach der Seeinitiierung als Rest-See eines zuvor ausgelaufenen Seebeckens, vertiefte sich Peatball Lake verhältnismäßig schnell mit zunehmender Sauerstoffanreicherung der Wassersäule, wie aus laminierten Sedimenten und hohen Fe/Ti- und Fe/S-Verhältnissen im Sediment ersichtlich ist. Die Sedimente von Peatball Lake archivierten einen Wechsel des Ablagerungsregimes bei Ausdehnung der Seefläche und einen Wechsel der Sedimentquelle von ursprünglichen, rein terrestrischen Ablagerungen und bereits umgelagerten Sedimenten aus drainierten Seebecken. Angezeigt wird dieser Wechsel durch eine Veränderung im Eintrag organischen Materials in das Seesystem, was wiederum das Potential von Thermokarstseen bei der Aufarbeitung alten Kohlenstoffs aus degradierendem Permafrost im Einzugsgebiet verdeutlicht. Der Seesedimentkern von der Herschel Insel im Yukon (Kanada) deckt das gesamte Holozän ab. Nach der Seeentstehung um 11,7 cal ka BP und einer Zeit intensiver Thermokarstaktivität bis 11,0 cal ka BP, wird die Phase einer eher kontinuierlichen Sedimentation von einer Schichtlücke um 1,6 cal ka BP unterbrochen. Diese wurde entweder durch die Drainage des Sees oder einer allochthonen Rutschung instabiler Uferlinien verursacht. Die spezielle Situation des Sees auf einer Stauchendmoräne aus marinem Material spiegelt sich auch in dem Seesedimentarchiv wieder. Das Aussüßen des wachsenden Sees wird durch die abnehmende elektrische Leitfähigkeit im Porenwasser angezeigt. Der Wechsel von marinen und Süßwasserostrakoden- und Foraminiferengemeinschaften bestätigt zum einen die abnehmende Salinität des Sees, aber zeigt zum anderen auch episodische Umlagerung von allochthonem, marinem Sediment. Auf der Grundlange von Permafrost- und Seesedimentkernen zeigt diese Arbeit Beispiele spätquartärer Entwicklungsgeschichte typischer Arktischer Permafrostlandschaften im zentral-östlichen Beringia. Es werden komplexe Zusammenhänge zwischen lokalen Störungsprozessen, regionaler Umweltdynamik und globalen Klimaveränderungen aufgezeigt. Thermokarstseen spielen dabei eine wichtige Rolle im sich kontinuierlich verändernden Landschaftsbild der hohen Breiten und im Stoffkreislauf bei der Aufarbeitung organischer Substanz. KW - paleolimnology KW - permafrost degradation KW - periglacial landscape evolution KW - thermokarst processes KW - carbon cycling KW - central-eastern Beringia KW - Paläolimnologie KW - Permafrostdegradation KW - periglaziale Landschaftsentwicklung KW - Thermokarstprozesse KW - Kohlenstoffkreislauf KW - zentral-östliches Beringia Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101364 ER - TY - THES A1 - Radeff, Giuditta T1 - Geohistory of the Central Anatolian Plateau southern margin (southern Turkey) T1 - Die geologische Entwicklung des südlichen zentralsanatolischen Plateaurandes (Süd-Türkei) N2 - The Adana Basin of southern Turkey, situated at the SE margin of the Central Anatolian Plateau is ideally located to record Neogene topographic and tectonic changes in the easternmost Mediterranean realm. Using industry seismic reflection data we correlate 34 seismic profiles with corresponding exposed units in the Adana Basin. The time-depth conversion of the interpreted seismic profiles allows us to reconstruct the subsidence curve of the Adana Basin and to outline the occurrence of a major increase in both subsidence and sedimentation rates at 5.45 – 5.33 Ma, leading to the deposition of almost 1500 km3 of conglomerates and marls. Our provenance analysis of the conglomerates reveals that most of the sediment is derived from and north of the SE margin of the Central Anatolian Plateau. A comparison of these results with the composition of recent conglomerates and the present drainage basins indicates major changes between late Messinian and present-day source areas. We suggest that these changes in source areas result of uplift and ensuing erosion of the SE margin of the plateau. This hypothesis is supported by the comparison of the Adana Basin subsidence curve with the subsidence curve of the Mut Basin, a mainly Neogene basin located on top of the Central Anatolian Plateau southern margin, showing that the Adana Basin subsidence event is coeval with an uplift episode of the plateau southern margin. The collection of several fault measurements in the Adana region show different deformation styles for the NW and SE margins of the Adana Basin. The weakly seismic NW portion of the basin is characterized by extensional and transtensional structures cutting Neogene deposits, likely accomodating the differential uplift occurring between the basin and the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Central Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break-off. N2 - Il Bacino di Adana (Turchia meridionale) é situato in posizione esterna rispetto al margine sud-orientale del plateau anatolico centrale. Il bacino risulta ubicato in posizione strategica per registrare i principali cambiamenti della topografia e dell’assetto tettonico avvenuti durante il Neogene nel Mediterraneo orientale. Utilizzando dati sismici provenienti dall’industria petrolifera abbiamo correlato 34 profili sismici con le unitá corrispondenti affioranti nel Bacino di Adana. La conversione da tempi a profonditá dei profili sismici interpretati ci ha permesso di ricostruire la curva di subsidenza del Bacino di Adana e di individuare un evento caratterizato da un importante aumento della subsidenza associato ad un considerevole incremento del tasso di sedimentazione. Questo evento, avvenuto tra 5.45 e 5.33 Ma ha portato alla deposizione di quasi 1500 km3 di conglomerati e marne. La nostra analisi di provenienza della porzione conglomeratica mostra che la maggior parte del sedimento proviene dal margine sud-orientale del plateau anatolico centrale e dalle aree situate a nord di questo. La comparazione di questi risultati con la composizione litologica di conglomerati recenti e con le litologie affioranti nei bacini di drenaggio attuali mostra cambiamenti rilevanti tra le aree di provenienza del sedimento Messiniane e quelle attuali. Riteniamo che questi cambiamenti nelle aree sorgente siano il risultato del sollevamento e della successiva erosione del margine sud-orientale del plateau anatolico centrale. Questa ipotesi é supportata dal confronto delle curve di subsidenza del Bacino di Adana e del Bacino di Mut, un bacino principalmente neogenico situato sulla sommitá del margine meridionale del plateau. La comparazione delle due curve di subsidenza mostra che l’evento di forte subsidenza del Bacino di Adana é coevo ad un episodio di sollevamento del margine meridionale del plateau anatolico centrale. La raccolta di un fitto dataset strutturale acquisito nella regione di Adana mostra differenti stili deformativi per i margini nord-occidentale e sud-orientale del bacino. La porzione nord-occidentale del bacino, debolmente sismica, é caratterizzata da strutture estensionali e transtensive che tagliano I depositi neogenici, verosimilmente accomodando il sollevamento differenziale tra il bacino e il margine sud-orientale del plateau. Riteniamo che l’evoluzione tettonica del margine meridionale del plateau anatolico centrale e la contemporanea subsidenza e sedimentazione nel Bacino di Adana sia da ricondurre a processi litosferici profondi, in particolar modo delaminazione litosferica e slab break-off. KW - Hebung des Plateaus KW - Sedimentenabfolge KW - Subsidenzgeschichte KW - Adana Becken KW - Süd-Türkei KW - plateau uplift KW - sedimentary record KW - subsidence history KW - Adana Basin KW - southern Turkey Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71865 ER - TY - THES A1 - Swierczynski, Tina T1 - A 7000 yr runoff chronology from varved sediments of Lake Mondsee (Upper Austria) T1 - Eine 7000-jährige Abflusschronologie anhand von warvierten Sedimenten des Mondsees (Oberösterreich) N2 - The potential increase in frequency and magnitude of extreme floods is currently discussed in terms of global warming and the intensification of the hydrological cycle. The profound knowledge of past natural variability of floods is of utmost importance in order to assess flood risk for the future. Since instrumental flood series cover only the last ~150 years, other approaches to reconstruct historical and pre-historical flood events are needed. Annually laminated (varved) lake sediments are meaningful natural geoarchives because they provide continuous records of environmental changes > 10000 years down to a seasonal resolution. Since lake basins additionally act as natural sediment traps, the riverine sediment supply, which is preserved as detrital event layers in the lake sediments, can be used as a proxy for extreme discharge events. Within my thesis I examined a ~ 8.50 m long sedimentary record from the pre-Alpine Lake Mondsee (Northeast European Alps), which covered the last 7000 years. This sediment record consists of calcite varves and intercalated detrital layers, which range in thickness from 0.05 to 32 mm. Detrital layer deposition was analysed by a combined method of microfacies analysis via thin sections, Scanning Electron Microscopy (SEM), μX-ray fluorescence (μXRF) scanning and magnetic susceptibility. This approach allows characterizing individual detrital event layers and assigning a corresponding input mechanism and catchment. Based on varve counting and controlled by 14C age dates, the main goals of this thesis are (i) to identify seasonal runoff processes, which lead to significant sediment supply from the catchment into the lake basin and (ii) to investigate flood frequency under changing climate boundary conditions. This thesis follows a line of different time slices, presenting an integrative approach linking instrumental and historical flood data from Lake Mondsee in order to evaluate the flood record inferred from Lake Mondsee sediments. The investigation of eleven short cores covering the last 100 years reveals the abundance of 12 detrital layers. Therein, two types of detrital layers are distinguished by grain size, geochemical composition and distribution pattern within the lake basin. Detrital layers, which are enriched in siliciclastic and dolomitic material, reveal sediment supply from the Flysch sediments and Northern Calcareous Alps into the lake basin. These layers are thicker in the northern lake basin (0.1-3.9 mm) and thinner in the southern lake basin (0.05-1.6 mm). Detrital layers, which are enriched in dolomitic components forming graded detrital layers (turbidites), indicate the provenance from the Northern Calcareous Alps. These layers are generally thicker (0.65-32 mm) and are solely recorded within the southern lake basin. In comparison with instrumental data, thicker graded layers result from local debris flow events in summer, whereas thin layers are deposited during regional flood events in spring/summer. Extreme summer floods as reported from flood layer deposition are principally caused by cyclonic activity from the Mediterranean Sea, e.g. July 1954, July 1997 and August 2002. During the last two millennia, Lake Mondsee sediments reveal two significant flood intervals with decadal-scale flood episodes, during the Dark Ages Cold Period (DACP) and the transition from the Medieval Climate Anomaly (MCA) into the Little Ice Age (LIA) suggesting a linkage of transition to climate cooling and summer flood recurrences in the Northeastern Alps. In contrast, intermediate or decreased flood episodes appeared during the MWP and the LIA. This indicates a non-straightforward relationship between temperature and flood recurrence, suggesting higher cyclonic activity during climate transition in the Northeast Alps. The 7000-year flood chronology reveals 47 debris flows and 269 floods, with increased flood activity shifting around 3500 and 1500 varve yr BP (varve yr BP = varve years before present, before present = AD 1950). This significant increase in flood activity shows a coincidence with millennial-scale climate cooling that is reported from main Alpine glacier advances and lower tree lines in the European Alps since about 3300 cal. yr BP (calibrated years before present). Despite relatively low flood occurrence prior to 1500 varve yr BP, floods at Lake Mondsee could have also influenced human life in early Neolithic lake dwellings (5750-4750 cal. yr BP). While the first lake dwellings were constructed on wetlands, the later lake dwellings were built on piles in the water suggesting an early flood risk adaptation of humans and/or a general change of the Late Neolithic Culture of lake-dwellers because of socio-economic reasons. However, a direct relationship between the final abandonment of the lake dwellings and higher flood frequencies is not evidenced. N2 - Ein verstärktes Auftreten von Hochwassern, sowohl in ihrer Häufigkeit als auch in ihrer Frequenz, wird im Zuge der Klimaerwärmung und einer möglichen Intensivierung des hydrologischen Kreislaufs diskutiert. Die Kenntnis über die natürliche Variabilität von Hochwasserereignissen ist dabei eine grundlegende Voraussetzung, um die Hochwassergefahr für die Zukunft abschätzen zu können. Da instrumentelle Hochwasserzeitreihen meist nur die letzten 150 Jahre abbilden sind andere Methoden erforderlich, um das Auftreten von historischen und prä-historischen Hochwassern festzustellen. Jährlich laminierte (warvierte) Seesedimente sind bedeutende natürliche Archive, denn sie liefern kontinuierliche Zeitreihen > 10000 Jahre mit einer bis zur saisonalen Auflösung. Seebecken stellen natürliche Sedimentfallen dar, wobei eingetragenes Flusssediment in den Seesedimenten als eine distinkte detritische Lage aufgezeichnet wird, und daher zur Rekonstruktion von extremen Abflussereignissen genutzt werden. Im Rahmen meiner Doktorarbeit habe ich einen 8.50 m langen Sedimentkern aus dem Mondsee (Nordostalpen) untersucht, welcher die letzten 7000 Jahre abdeckt. Dieser Sedimentkern besteht aus Kalzitwarven und eingeschalteten detritischen Lagen mit einer Mächtigkeit von 0.05-32 mm. Detritische Lagen wurden mit Hilfe einer kombinierten Methode untersucht: Mikrofaziesanalyse, Rasterelektronenmikroskopie, Röntgenfluoreszenzanalyse (µXRF) und magnetische Suszeptibilität. Dieser Ansatz ermöglicht die Charakterisierung der einzelnen detritischen Lagen bezüglich der Eintragsprozesse und die Lokalisierung des Einzugsgebietes. Auf Grundlage der Warvenzählung und 14C Datierungen sind die wichtigsten Ziele dieser Arbeit: (i) die Identifizierung der Eintragsprozesse, welche zu einem Sedimenteintrag vom Einzugsgebiet bis in den See führen und (ii) die Rekonstruktion der Hochwasserfrequenz unter veränderten Klimabedingungen. Diese Arbeit zeigt eine Untersuchung auf verschiedenen Zeitscheiben, wobei instrumentelle und historische Daten genutzt werden, um die Aufzeichnung von pre-historischen Hochwasser in den Mondseesedimenten besser zu verstehen. Innerhalb der letzten 100 Jahre wurden zwölf Abflussereignisse aufgezeichnet. Zwei Typen von detritschen Lagen können anhand von Korngröße, geochemischer Zusammensetzung und des Verteilungsmusters unterschieden werden. Detritische Lagen, welche aus siliziklastischen und dolomitischen Material bestehen, zeigen eine Sedimentherkunft vom Teileinzugsgebiet des Flysch (nördliches Einzugsgebiet) und der Nördlichen Kalkalpen (südliches Teileinzugsgebiet) auf. Diese Lagen sind im Nördlichen Becken mächtiger (0.1-3.9 mm) als im südlichen Seebecken (0.05-1.6 mm). Detritische Lagen, welche nur aus dolomitischem Material bestehen und Turbititlagen aufzeigen (0.65-32 mm), weisen auf eine Herkunft aus den Nördlichen Kalkalpen hin. Im Vergleich mit instrumentellen Zeitreihen, stammen die mächtigeren Lagen von lokalen Murereignissen im Sommer und feinere Eintragslagen von regionalen Frühjahrs- und Sommerhochwassern. Extreme Sommerhochwasser am Mondsee werden hauptsächlich durch Zyklonen vom Mittelmeer ausgelöst, z.B. Juli 1954, Juli 1997 und August 2002. Die Untersuchung des langen Sedimentkerns vom Mondsee zeigt während der letzten 2000 Jahre signifikante Hochwasserintervalle mit dekadischen Hochwasserepisoden während der Völkerwanderungszeit und im Übergang vom Mittelalter in die Kleine Eiszeit. Dies weist auf eine Verknüpfung von Abkühlungsphasen und Sommerhochwassern im Nordostalpenraum hin. Während der Mittelalterlichen Wärmephase und in der Kleinen Eiszeit kam es jedoch zu einer geringeren Hochwasseraktivität. Dies zeigt einen komplexen Zusammenhang von Temperaturentwicklung und Hochwasseraktivität in den Nordostalpen, mit einer erhöhten Zyklonenaktivät in den Übergängen von wärmeren zu kälteren Phasen. Während der letzten 7000 Jahre wurden 47 Muren und 269 Hochwasser aufgezeichnet, wobei es eine signifikante Änderung mit erhöhter Häufigkeit um 3500 und 1500 Warvenjahre v. h. gab (v.h. = vor heute = AD 1950). Diese signifikante Änderung stimmt mit einem langfristigem Abkühlungstrend überein, welcher durch alpine Gletschervorstöße und das Absinken von Baumgrenzen seit etwa 3300 Warvenjahre v.h. berichtet wird. Trotz relativ geringer Hochwasseraktivität um 1500 Warvenjahre v.h., könnte das Auftreten von Hochwasser auch das Leben Menschen in Neolithischen Pfahlbausiedlungen (5750-4750 cal. yr BP) beeinflusst haben. Während die ersten Pfahlbauten noch als Feuchtbodensiedlungen am Land entstanden, wurden spätere Siedlungen eventuell als Anpassung an stark schwankenden Seewasserspiegeln auf Pfählen im Wasser gebaut und/oder zeigen eine allgemeine Veränderung der Siedlungsaktivitäten der Neolithischen Pfahlbaukultur an, aufgrund sozio-ökonomischer Veränderungen. Ein direkter Zusammenhang zwischen dem Verlassen der Pfahlbausiedlungen und einer erhöhten Hochwasseraktivität konnte jedoch nicht festgestellt werden. KW - Mondsee KW - Paläohochwasser KW - Seesedimente KW - Warven KW - Klimarekonstruktion KW - Mondsee KW - Paleofloods KW - Lake sediments KW - Warves KW - Climate reconstruction Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66702 ER - TY - THES A1 - Gassner, Alexandra Carina T1 - The character of the core-mantle boundary : a systematic study using PcP N2 - Assuming that liquid iron alloy from the outer core interacts with the solid silicate-rich lower mantle the influence on the core-mantle reflected phase PcP is studied. If the core-mantle boundary is not a sharp discontinuity, this becomes apparent in the waveform and amplitude of PcP. Iron-silicate mixing would lead to regions of partial melting with higher density which in turn reduces the velocity of seismic waves. On the basis of the calculation and interpretation of short-period synthetic seismograms, using the reflectivity and Gauss Beam method, a model space is evaluated for these ultra-low velocity zones (ULVZs). The aim of this thesis is to analyse the behaviour of PcP between 10° and 40° source distance for such models using different velocity and density configurations. Furthermore, the resolution limits of seismic data are discussed. The influence of the assumed layer thickness, dominant source frequency and ULVZ topography are analysed. The Gräfenberg and NORSAR arrays are then used to investigate PcP from deep earthquakes and nuclear explosions. The seismic resolution of an ULVZ is limited both for velocity and density contrasts and layer thicknesses. Even a very thin global core-mantle transition zone (CMTZ), rather than a discrete boundary and also with strong impedance contrasts, seems possible: If no precursor is observable but the PcP_model /PcP_smooth amplitude reduction amounts to more than 10%, a very thin ULVZ of 5 km with a first-order discontinuity may exist. Otherwise, if amplitude reductions of less than 10% are obtained, this could indicate either a moderate, thin ULVZ or a gradient mantle-side CMTZ. Synthetic computations reveal notable amplitude variations as function of the distance and the impedance contrasts. Thereby a primary density effect in the very steep-angle range and a pronounced velocity dependency in the wide-angle region can be predicted. In view of the modelled findings, there is evidence for a 10 to 13.5 km thick ULVZ 600 km south-eastern of Moscow with a NW-SE extension of about 450 km. Here a single specific assumption about the velocity and density anomaly is not possible. This is in agreement with the synthetic results in which several models create similar amplitude-waveform characteristics. For example, a ULVZ model with contrasts of -5% VP , -15% VS and +5% density explain the measured PcP amplitudes. Moreover, below SW Finland and NNW of the Caspian Sea a CMB topography can be assumed. The amplitude measurements indicate a wavelength of 200 km and a height of 1 km topography, previously also shown in the study by Kampfmann and Müller (1989). Better constraints might be provided by a joined analysis of seismological data, mineralogical experiments and geodynamic modelling. N2 - Unter der Annahme, dass flüssiges Eisen aus dem äußeren Erdkern mit dem festen, silikat-reichen Unteren Mantel reagiert, wird eine Einflussnahme auf die Kern-Mantel Reflexionsphase PcP erwartet. Ist die Kern-Mantel Grenze aufgeweicht, und nicht wie bislang angenommen ein diskreter Übergang, so zeichnet sich dies in der Wellenform und Amplitude von PcP ab. Die Interaktion mit Eisen führt zu teilweise aufgeschmolzenen Bereichen höherer Dichte, welche die seismischen Wellengeschwindigkeiten herabsetzen. Basierend auf den Berechnungen von kurzperiodischen synthetischen Seismogrammen, mittels der Reflektivitäts- und Gauss Beam Methode, soll ein möglicher Modellraum dieser Niedriggeschwindigkeitszonen ermittelt werden. Das Ziel dieser Arbeit ist es das Verhalten von PcP im Distanzbereich von 10° bis 40° unter dem Einfluss dieser Modelle mit diversen Geschwindigkeits- und Dichtekontrasten zu untersuchen. Ferner wird das Auflösungsvermögen hinsichtlich seismischer Daten diskutiert. Entscheidende Parameter wie Anomaliedicke, Quellfrequenz und Topographie werden hierbei analysiert. Tiefe Erdbeben und Kernexplosionen, die sich im entsprechenden Entfernungsbereich zum Gräfenberg und NORSAR Array befinden, werden anschließend im Hinblick auf PcP ausgewertet. Das seismische Auflösungsvermögen von Niedriggeschwindigkeitszonen ist stark begrenzt sowohl in Bezug auf Geschwindigkeits- und Dichtekontraste als auch hinsichtlich der Mächtigkeit. Es besteht sogar die Möglichkeit einer dünnen, globalen Kern-Mantel Übergangszone, selbst mit großen Impedanzkontrasten, ohne dass dies mit seismologischen Methoden detektiert werden könnte: Wird kein precursor zu PcP beobachtet aber das PcPmodel /PcPsmooth Amplitudenverhältnis zeigt gleichzeitig eine Reduktion von mehr als 10%, dann könnte eine sehr dünne Niedriggeschwindigkeitszone von ca. 5 km Mächtigkeit und einer Diskontinuität erster Ordnung vorliegen. Andererseits, ist PcP um weniger als 10% reduziert, könnte dies entweder auf eine dünne, moderate Niedriggeschwindigkeitszone oder einen graduellen Kern-Mantel Übergang hindeuten. Die synthetischen Berechnungen ergeben starke Amplitudenvariationen als Funktion der Distanz, welche auf den Impedanzkontrast zurückzuführen sind. Dabei ergibt sich ein primärer Dichteeffekt im extremen Steilwinkelbereich und ein maßgeblicher Geschwindigkeitseinfluss im Weitwinkelbereich. Im Hinblick auf die modellierten Resultate lässt sich eine 10 - 13.5 km mächtige Niedriggeschwindigkeitszone 600 km südöstlich von Moskau mit einer NW-SE Ausdehnung von mindestens 450 km folgern, wobei eine exakte Aussage über Geschwindigkeiten und Dichte nicht möglich ist. Dies ist im Konsens mit den synthetischen Berechnungen, wonach viele unterschiedliche Modelle ähnliche Amplituden- und Wellenformcharakteristiken erzeugen. Zum Beispiel erklärt ein Modell mit Kontrasten von -5% VP , -15% VS and +5% Dichte die gemessenen PcP Amplituden. Darüber hinaus können unterhalb des südwestlichen Finnlands und nord-nordwestlich des Kaspischen Meeres Undulationen an der Kern-Mantel Grenze selbst vermutet werden. Unter Berücksichtigung früherer Studien, z. B. von Kampfmann and Müller (1989), deuten die Messergebnisse auf eine laterale Topographie von 200 km und eine Höhe von 1 km hin. Eine Eingrenzung der potentiellen Anomaliemodelle kann nur durch eine gemeinsame Auswertung mit mineralogischen Experimenten und geodynamischen Modellierungen erfolgen. KW - Kern-Mantel Grenze KW - Seismologie KW - Ultra-Niedriggeschwindigkeitszonen KW - Steilwinkel-Analyse von PcP KW - Tiefbeben und Kernexplosionen KW - core-mantle boundary KW - seismology KW - ultra-low velocity zones KW - steep-angle analysis of PcP KW - deep earthquakes and nuclear explosions Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63590 ER - TY - THES A1 - Ruch, Joël T1 - Volcano deformation analysis in the Lazufre area (central Andes) using geodetic and geological observations T1 - Vulkan Deformationsanalyse im Bereich Lazufre (Zentral-Anden) mit geodätischen und geologischen Beobachtungen N2 - Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring. N2 - Vulkanische Deformationen in großem Maßstab, die mittels InSAR gemessen wurden, liefern neue Informationen und dadurch einen neuen Blickwinkel auf vulkan-tektonische Aktivitäten und das Verständnis von langlebigen, magmatischen Systemen. Die Destabilisierung eines solchen Systems in der Tiefe beeinflusst dauerhaft die Oberfläche durch Versatz des Bodens, magmatische Einflüsse und vulkanische Unruhen. Mit der Kombination aus kleinräumigem Bodenversatz gemessen mittels InSAR, numerischer Modellierung und langfristigen geologischen Beobachtungen, analysieren wir die Gegend um den Vulkan Lazufre in den Zentralanden, um die raumzeitliche Entwicklung der Region zu bestimmen. Bodenversatz wurde hierbei im Jahr 1997 mittels Radar-Interferrometrie (InSAR) gemessen, was eine Fläche von 1800 km² ausmacht, vergleichbar mit der Größe der Deformation des Kraters. Im Jahr 2000 wurde zusätzlich eine kleinräumige Deformation am Nachbarvulkan Lastarria entdeckt. Wir sehen räumliche als auch zeitliche Verbindungen zwischen der Deformation des Vulkans und vulkanischen Strukturen innerhalb der betroffenen Gegend. Wir folgern daraus, dass diese Beobachtungen der Ausdruck eines langlebigen, magmatischen Systems in der Tiefe an der Oberfläche sind. Es ist noch nicht klar, ob Lazufre größere vulkanische Unruhen, wie zum Beispiel Eruptionen auslösen könnte, aber die Deformation am Vulkan Lastarria und ein Anstieg der großräumigen Deformationsrate, machen diese Region interessant für eine zukünftige, kontinuierliche Überwachung. KW - Vulkan Verformung KW - InSAR KW - zentralen Anden KW - Spannungsfeld KW - volcano deformation KW - InSAR KW - central Andes KW - stress field Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-47361 ER - TY - JOUR A1 - Brendel, Nina A1 - Matzner, Nils A1 - Menzel, Max-Peter T1 - Geographisches Gezwitscher – Analyse von Twitter-Daten als Methode im GW-Unterricht JF - GW-Unterricht N2 - Soziale Medien sind ein wesentlicher Bestandteil des Alltags von Schüler*innen und gleichzeitig zunehmend wichtig in Wirtschaft, Politik und Wissenschaft. Am Beispiel von Twitter zeigt dieser Beitrag, dass soziale Medien im Unterricht auch für die Beantwortung geographischer Fragestellungen verwendet werden können. Hierfür eignen sich Twitter-Daten aufgrund ihrer Georeferenzierung und weiterer interessanter Inhalte besonders. Der Beitrag gibt einen Überblick über die Verwendung von Twitter für sozialwissenschaftliche und humangeographische Fragestellungen und reflektiert die Nutzung von Twitter im Unterricht. Für die Unterrichtspraxis werden Beispiele zu den Themen Braunkohle, Flutereignisse und Raumwahrnehmungen sowie Anleitungen zur Auswertung, Anwendung und Reflexion von Twitter-Analysen vorgestellt. KW - Twitter KW - Soziale Medien KW - Forschungsmethodik KW - Unterrichtsmethoden Y1 - 2021 U6 - https://doi.org/10.1553/gw-unterricht164s72 SN - 2414-4169 SP - 72 EP - 85 PB - Verlag der Österreichischen Akademie der Wissenschaften CY - Wien ER - TY - THES A1 - Jentsch, Anna T1 - Soil gas analytics in geothermal exploration and monitoring T1 - Bodengasanalytik für die Exploration und Überwachung von geothermischen Ressourcen N2 - Major challenges during geothermal exploration and exploitation include the structural-geological characterization of the geothermal system and the application of sustainable monitoring concepts to explain changes in a geothermal reservoir during production and/or reinjection of fluids. In the absence of sufficiently permeable reservoir rocks, faults and fracture networks are preferred drilling targets because they can facilitate the migration of hot and/or cold fluids. In volcanic-geothermal systems considerable amounts of gas emissions can be released at the earth surface, often related to these fluid-releasing structures. In this thesis, I developed and evaluated different methodological approaches and measurement concepts to determine the spatial and temporal variation of several soil gas parameters to understand the structural control on fluid flow. In order to validate their potential as innovative geothermal exploration and monitoring tools, these methodological approaches were applied to three different volcanic-geothermal systems. At each site an individual survey design was developed regarding the site-specific questions. The first study presents results of the combined measurement of CO2 flux, ground temperatures, and the analysis of isotope ratios (δ13CCO2, 3He/4He) across the main production area of the Los Humeros geothermal field, to identify locations with a connection to its supercritical (T > 374◦C and P > 221 bar) geothermal reservoir. The results of the systematic and large-scale (25 x 200 m) CO2 flux scouting survey proved to be a fast and flexible way to identify areas of anomalous degassing. Subsequent sampling with high resolution surveys revealed the actual extent and heterogenous pattern of anomalous degassing areas. They have been related to the internal fault hydraulic architecture and allowed to assess favourable structural settings for fluid flow such as fault intersections. Finally, areas of unknown structurally controlled permeability with a connection to the superhot geothermal reservoir have been determined, which represent promising targets for future geothermal exploration and development. In the second study, I introduce a novel monitoring approach by examining the variation of CO2 flux to monitor changes in the reservoir induced by fluid reinjection. For that reason, an automated, multi-chamber CO2 flux system was deployed across the damage zone of a major normal fault crossing the Los Humeros geothermal field. Based on the results of the CO2 flux scouting survey, a suitable site was selected that had a connection to the geothermal reservoir, as identified by hydrothermal CO2 degassing and hot ground temperatures (> 50 °C). The results revealed a response of gas emissions to changes in reinjection rates within 24 h, proving an active hydraulic communication between the geothermal reservoir and the earth surface. This is a promising monitoring strategy that provides nearly real-time and in-situ data about changes in the reservoir and allows to timely react to unwanted changes (e.g., pressure decline, seismicity). The third study presents results from the Aluto geothermal field in Ethiopia where an area-wide and multi-parameter analysis, consisting of measurements of CO2 flux, 222Rn, and 220Rn activity concentrations and ground temperatures was conducted to detect hidden permeable structures. 222Rn and 220Rn activity concentrations are evaluated as a complementary soil gas parameter to CO2 flux, to investigate their potential to understand tectono-volcanic degassing. The combined measurement of all parameters enabled to develop soil gas fingerprints, a novel visualization approach. Depending on the magnitude of gas emissions and their migration velocities the study area was divided in volcanic (heat), tectonic (structures), and volcano-tectonic dominated areas. Based on these concepts, volcano-tectonic dominated areas, where hot hydrothermal fluids migrate along permeable faults, present the most promising targets for future geothermal exploration and development in this geothermal field. Two of these areas have been identified in the south and south-east which have not yet been targeted for geothermal exploitation. Furthermore, two unknown areas of structural related permeability could be identified by 222Rn and 220Rn activity concentrations. Eventually, the fourth study presents a novel measurement approach to detect structural controlled CO2 degassing, in Ngapouri geothermal area, New Zealand. For the first time, the tunable diode laser (TDL) method was applied in a low-degassing geothermal area, to evaluate its potential as a geothermal exploration method. Although the sampling approach is based on profile measurements, which leads to low spatial resolution, the results showed a link between known/inferred faults and increased CO2 concentrations. Thus, the TDL method proved to be a successful in the determination of structural related permeability, also in areas where no obvious geothermal activity is present. Once an area of anomalous CO2 concentrations has been identified, it can be easily complemented by CO2 flux grid measurements to determine the extent and orientation of the degassing segment. With the results of this work, I was able to demonstrate the applicability of systematic and area-wide soil gas measurements for geothermal exploration and monitoring purposes. In particular, the combination of different soil gases using different measurement networks enables the identification and characterization of fluid-bearing structures and has not yet been used and/or tested as standard practice. The different studies present efficient and cost-effective workflows and demonstrate a hands-on approach to a successful and sustainable exploration and monitoring of geothermal resources. This minimizes the resource risk during geothermal project development. Finally, to advance the understanding of the complex structure and dynamics of geothermal systems, a combination of comprehensive and cutting-edge geological, geochemical, and geophysical exploration methods is essential. N2 - Zu den großen Herausforderungen bei der Erkundung und Nutzung geothermischer Ressourcen, gehören die strukturgeologische Charakterisierung eines geothermischen Systems sowie die Anwendung nachhaltiger Überwachungskonzepte, um Veränderungen im geothermischen Reservoir während der Förderung und/oder Injektion von Fluiden zu verstehen. Bei unzureichender Permeabilität des Reservoirgesteins stellen Verwerfungen und Kluftnetzwerke bevorzugte Bohrziele dar, da sie potentielle Wegsamkeiten für heiße und/oder kalte Fluide sind. Entlang dieser fluidführenden Strukturen können in vulkanisch-geothermischen Systemen auch erhebliche Mengen an Gasemissionen an der Erdoberfläche freigesetzt werden. Im Rahmen dieser Arbeit wurden verschiedene methodische Ansätze und Messkonzepte entwickelt und getestet, um die räumliche und zeitliche Variation verschiedener Bodengasparameter zu bestimmen und diese im Kontext struktureller Permeabilitäten zu interpretieren. Um das Potential der Bodengasanalytik als innovative geothermische Explorations- und Überwachungsmethode zu validieren, wurden die methodischen Ansätze auf drei verschiedene vulkanisch-geothermische Systeme angewendet. Diesbezüglich wurde für jeden Standort ein individueller Messansatz hinsichtlich der bekannten strukturgeologischen Merkmale und standortspezifischen Fragestellung entwickelt. Die erste Studie präsentiert Ergebnisse aus der kombinierten Messung des CO2-Flusses, der Bodentemperatur und der Analyse von Isotopenverhältnissen (δ13CCO2, 3He/4He), welche systematisch und flächendeckend in der geothermischen Produktionszone des Geothermalfeldes Los Humeros, Mexiko, gemessen wurden. Ziel war es, Bereiche mit einer Verbindung zum überkritischen (T > 374◦C and P > 221 bar) und bisher noch ungenutzten geothermischen Reservoir zu identifizieren. Das mit großem Punktabstand und systematisch generierte Messnetz (25 x 200 m) für die Bestimmung des CO2-Flusses erwies sich als schnelle und flexible Anwendung zur Identifizierung von Gebieten mit anomaler CO2-Entgasung. Basierend auf diesen Ergebnissen wurde anschließend mit geringeren Messabständen die genaue Ausdehnung und das heterogene Muster der anomalen Entgasungsgebiete aufgelöst. Dadurch war es möglich, die Entgasungsmuster mit der internen strukturgeologischen Heterogenität einzelner Störungssegmente in Verbindung zu bringen, wodurch Bereiche, die den Gasfluss besonders begünstigen, wie z.B. Störungsschnittpunkte, ermittelt werden konnten. Schließlich wurden vorher unbekannte, geothermisch interessante Bereiche, die eine erhöhte strukturelle Permeabilität aufweisen und eine Verbindung zum überkritischen Reservoir darstellen, identifiziert. Diese Bereiche gelten als besonders vielversprechend für die zukünftige geothermische Exploration und Entwicklung des Geothermalfeldes. In der zweiten Studie wird ein neuartiger Überwachungsansatz vorgestellt, bei dem kontinuierlich der CO2-Fluss gemessen wurde, um Veränderungen im Reservoir zu überwachen, die durch die Reinjektion von kaltem Thermalwasser verursacht werden. Zu diesem Zweck wurde ein automatisiertes Mehrkammer-CO2-Flusssystem innerhalb der Bruchzone einer Hauptstörung aufgebaut. Die Grundlage eines geeigneten Standortes wurde durch die Ergebnisse der CO2-Explorationsuntersuchungen gegeben. Es war von großer Wichtigkeit, dass der Standort eine Verbindung zum geothermischen Reservoir aufweist, erkennbar an hydrothermaler CO2-Entgasung und heißen Bodentemperaturen (> 50 °C). Die Ergebnisse zeigten ein Sinken der Gasemissionen als Reaktion auf Änderungen der Reinjektionsraten innerhalb von 24 h, was auf eine aktive hydraulische Kommunikation zwischen dem geothermischen Reservoir und der Erdoberfläche hinweist. Dies ist ein vielversprechende Methode, da nahezu in Echtzeit und in situ Daten über Veränderungen im Reservoir angezeigt werden und eine rechtzeitige Reaktion auf unerwünschte Veränderungen (z.B. Druckabfall, Seismizität) möglich ist. Die dritte Studie präsentiert Ergebnisse aus dem Aluto-Geothermiefeld in Äthiopien, bei dem eine flächendeckende, Multiparameter-Analyse, bestehend aus CO2-Fluss, 222Rn- und 220Rn-Aktivitätskonzentrationen und Bodentemperaturen durchgeführt wurde, um verborgene fluidführende Strukturen zu erkennen. Die 222Rn- und 220Rn-Aktivitätskonzentrationen wurden als ergänzende Bodengasparameter zum CO2-Fluss verwendet, um ihr Potenzial als zusätzliche Explorationsparameter zu bewerten. Die kombinierte Messung aller Parameter ermöglichte die Entwicklung von Bodengas Fingerabdrücken – ein neuartiger Visualisierungsansatz. Dadurch lässt sich in Abhängigkeit von der Menge an Gasemissionen und deren Fließgeschwindigkeiten das Untersuchungsgebiet in vulkanisch (Wärme), tektonisch (Strukturen) und vulkanischtektonisch dominierte Gebiete unterteilen. Basierend auf diesem Konzept stellen vulkanischtektonisch dominierte Gebiete die vielversprechendsten Ziele für die zukünftige geothermische Exploration und Entwicklung an diesem Standort dar, da hier heiße hydrothermale Fluide entlang durchlässiger Strukturen migrieren. Zwei solche, bisher nicht berücksichtigte Gebiete wurden im Süden und Südosten identifiziert. Darüber hinaus konnten zwei bisher unbekannte Gebiete mit strukturell bedingter Durchlässigkeit anhand der Aktivitätskonzentrationen von 222Rn und 220Rn identifiziert werden. Schließlich wird in der vierten Studie ein neuartiger Messansatz zum Nachweis der strukturbedingten CO2-Entgasung im geothermischen Gebiet Ngapouri, Neuseeland, vorgestellt. Zum ersten Mal wurde die Tunable-Diode-Laser-Methode (TDL) in einem geothermischen Gebiet mit geringer Entgasung angewandt, um ihr Potenzial als geothermische Explorationsmethode zu bewerten. Obwohl der Messansatz auf Profilmessungen basiert, was zu einer geringen räumlichen Auflösung führt, zeigen die Ergebnisse einen Zusammenhang zwischen bekannten und unbekannten Störungen sowie erhöhten CO2-Konzentrationen. Somit erwies sich die TDL-Methode bei der Bestimmung der strukturbedingten Permeabilität auch in solchen Gebieten als erfolgreich, in denen keine offensichtliche geothermische Aktivität vorhanden ist. Mit systematischen und kleinskaligen CO2-Fluss-Messungen, kann anschließend die räumliche Auflösung der Abschnitte eines Profils mit erhöhten CO2-Konzentrationen, verfeinert werden. Mit den Ergebnissen dieser Arbeit konnte ich die Anwendbarkeit systematischer und flächendeckender Bodengasmessungen für geothermische Explorations- und Überwachungszwecke nachweisen. Die Kombination von verschiedenen Bodengasen und deren Messung anhand verschiedener Messnetze ermöglicht die genaue Identifizierung und Charakterisierung fluidführender Strukturen und wurde bisher noch nicht standardmäßig eingesetzt und/oder erprobt. Mit den Ergebnissen der jeweiligen Studien werden effiziente und kostengünstige Arbeitsabläufe dargelegt, die einen praxisorientierten Ansatz zeigen, der zu einer erfolgreichen und nachhaltigen Exploration und Überwachung geothermischer Ressourcen beitragen kann. Letztlich wird somit das Ressourcenrisiko bei der geothermischen Projektentwicklung minimiert. Um das Verständnis der komplexen Struktur und Dynamik geothermischer Systeme voranzutreiben, ist schließlich eine Kombination aus innovativen und flächendeckenden geologischen, geochemischen und geophysikalischen Methoden unerlässlich. KW - geothermal exploration KW - gas geochemistry KW - structural geology KW - geothermal monitoring KW - Gasgeochemie KW - geothermische Exploration KW - geothermische Überwachung KW - Strukturgeologie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-544039 ER - TY - THES A1 - Neuharth, Derek T1 - Evolution of divergent and strike-slip boundaries in response to surface processes T1 - Die Entwicklung divergenter und transversaler Plattengrenzen unter dem Einfluss von Erdoberflächenprozessen N2 - Plate tectonics describes the movement of rigid plates at the surface of the Earth as well as their complex deformation at three types of plate boundaries: 1) divergent boundaries such as rift zones and mid-ocean ridges, 2) strike-slip boundaries where plates grind past each other, such as the San Andreas Fault, and 3) convergent boundaries that form large mountain ranges like the Andes. The generally narrow deformation zones that bound the plates exhibit complex strain patterns that evolve through time. During this evolution, plate boundary deformation is driven by tectonic forces arising from Earth’s deep interior and from within the lithosphere, but also by surface processes, which erode topographic highs and deposit the resulting sediment into regions of low elevation. Through the combination of these factors, the surface of the Earth evolves in a highly dynamic way with several feedback mechanisms. At divergent boundaries, for example, tensional stresses thin the lithosphere, forcing uplift and subsequent erosion of rift flanks, which creates a sediment source. Meanwhile, the rift center subsides and becomes a topographic low where sediments accumulate. This mass transfer from foot- to hanging wall plays an important role during rifting, as it prolongs the activity of individual normal faults. When rifting continues, continents are eventually split apart, exhuming Earth’s mantle and creating new oceanic crust. Because of the complex interplay between deep tectonic forces that shape plate boundaries and mass redistribution at the Earth’s surface, it is vital to understand feedbacks between the two domains and how they shape our planet. In this study I aim to provide insight on two primary questions: 1) How do divergent and strike-slip plate boundaries evolve? 2) How is this evolution, on a large temporal scale and a smaller structural scale, affected by the alteration of the surface through erosion and deposition? This is done in three chapters that examine the evolution of divergent and strike-slip plate boundaries using numerical models. Chapter 2 takes a detailed look at the evolution of rift systems using two-dimensional models. Specifically, I extract faults from a range of rift models and correlate them through time to examine how fault networks evolve in space and time. By implementing a two-way coupling between the geodynamic code ASPECT and landscape evolution code FastScape, I investigate how the fault network and rift evolution are influenced by the system’s erosional efficiency, which represents many factors like lithology or climate. In Chapter 3, I examine rift evolution from a three-dimensional perspective. In this chapter I study linkage modes for offset rifts to determine when fast-rotating plate-boundary structures known as continental microplates form. Chapter 4 uses the two-way numerical coupling between tectonics and landscape evolution to investigate how a strike-slip boundary responds to large sediment loads, and whether this is sufficient to form an entirely new type of flexural strike-slip basin. N2 - Plattentektonik beschreibt die Bewegung starrer tektonischer Platten an der Erdoberfläche sowie deren komplexe Deformation an drei Arten von Plattengrenzen: 1) divergenten Grenzen wie Grabenbrüchen und mittelozeanische Rücken, 2) transversalen Grenzen, an denen Platten gegeneinander verschoben werden, wie die San-Andreas-Verwerfung, und 3) konvergenten Grenzen, die große Gebirgszüge wie die Anden bilden. Diese schmalen Deformationszonen, die Platten begrenzen, weisen meist komplexe Dehnungsmuster auf, die sich im Laufe der Zeit entwickeln. Während dieser Entwicklung wird die Verformung der Plattengrenzen durch tektonische Kräfte aus dem tiefen Erdinneren und der Lithosphäre, aber auch durch Oberflächenprozesse, welche topografische Erhebungen erodieren und die daraus resultierenden Sedimente in tiefer gelegenen Gebieten ablagern, angetrieben. Durch das Zusammenwirken und die Rückkopplung dieser Faktoren entwickelt sich die Erdoberfläche in einer extrem dynamischen Art und Weise. An divergenten Grenzen beispielsweise dünnen Zugspannungen die Lithosphäre aus, was zu einer Hebung und anschließenden Erosion der Flanken eines Grabenbruchs führt, wobei wiederum Sedimente freigesetzt werden. Währenddessen sinkt das Zentrum des Grabens ab und wird zu einer topografischen Senke, in der sich Sedimente ablagern. Diese Massenumverteilung vom Fuß zum Hang einer Verwerfung spielt eine wichtige Rolle, da er die Aktivität einzelner Verwerfungen verlängert. Durch anhaltende Divergenz werden Kontinente schließlich auseinandergerissen, wodurch der Erdmantel an die Erdoberfläche gefördert und neue ozeanische Kruste gebildet wird. Aufgrund des komplexen Zusammenspiels zwischen tektonischen Kräften aus dem tiefen Erdinneren und der Massenumverteilung an der Erdoberfläche ist es von entscheidender Bedeutung, die Rückkopplungen zwischen diesen beiden Bereichen zu verstehen. In dieser Studie möchte ich Einblicke zu zwei Hauptfragen geben: 1) Wie entwickeln sich divergierende Plattengrenzen? 2) Wie wird diese Entwicklung auf einer großen zeitlichen und einer kleinen strukturellen Skala durch die Veränderung der Oberfläche durch Erosion und Sedimentation beeinflusst? In drei Kapiteln untersuche ich die Entwicklung von divergenten und streichenden Plattengrenzen anhand numerischer Modelle. In Kapitel 2 wird die Entwicklung von Grabenbrüchen anhand zweidimensionaler Modelle im Detail erforscht. Dabei extrahiere ich Verwerfungen aus einer Reihe von Modellen und korreliere sie über die Zeit, um zu untersuchen, wie sich Verwerfungsnetzwerke räumlich und zeitlich entwickeln. Durch die bidirektionale Kopplung des Geodynamik-Codes ASPECT und des Erdoberflächen-Codes FastScape untersuche ich, wie diese Verwerfungsnetzwerk und der Grabenbruch im Allgemeinen durch die Erosionseffizienz des Systems, welche viele Faktoren wie Lithologie oder Klima abbildet, beeinflusst werden. In Kapitel 3 untersuche ich die Entwicklung eines Grabenbruchs aus einer dreidimensionalen Perspektive. In diesem Kapitel analysiere ich wie sich gegeneinander versetzte Grabenbrüche verbinden und wann sich dabei schnell rotierende kontinentale Mikroplatten bilden. In Kapitel 4 nutze ich die entwickelte bidirektionale Kopplung zwischen Geodynamik und Erdoberflächenprozessen, um zu verstehen, wie transversale Plattengrenzen auf Sedimentlasten reagieren und ob die ausreicht, um einen völlig neue Art von Sedimentbecken in dieser Umgebung zu formen. KW - geodynamics KW - numerical modelling KW - rift KW - strike-slip KW - surface processes KW - microplate KW - FastScape KW - ASPECT KW - ASPECT KW - FastScape KW - Geodynamik KW - Mikroplatte KW - numerische Modellierung KW - Rift KW - Blattverschiebung KW - Oberflächenprozesse Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549403 ER - TY - JOUR A1 - Smith, Taylor A1 - Zotta, Ruxandra-Maria A1 - Boulton, Chris A. A1 - Lenton, Timothy M. A1 - Dorigo, Wouter A1 - Boers, Niklas T1 - Reliability of resilience estimation based on multi-instrument time series JF - Earth System Dynamics N2 - Many widely used observational data sets are comprised of several overlapping instrument records. While data inter-calibration techniques often yield continuous and reliable data for trend analysis, less attention is generally paid to maintaining higher-order statistics such as variance and autocorrelation. A growing body of work uses these metrics to quantify the stability or resilience of a system under study and potentially to anticipate an approaching critical transition in the system. Exploring the degree to which changes in resilience indicators such as the variance or autocorrelation can be attributed to non-stationary characteristics of the measurement process – rather than actual changes in the dynamical properties of the system – is important in this context. In this work we use both synthetic and empirical data to explore how changes in the noise structure of a data set are propagated into the commonly used resilience metrics lag-one autocorrelation and variance. We focus on examples from remotely sensed vegetation indicators such as vegetation optical depth and the normalized difference vegetation index from different satellite sources. We find that time series resulting from mixing signals from sensors with varied uncertainties and covering overlapping time spans can lead to biases in inferred resilience changes. These biases are typically more pronounced when resilience metrics are aggregated (for example, by land-cover type or region), whereas estimates for individual time series remain reliable at reasonable sensor signal-to-noise ratios. Our work provides guidelines for the treatment and aggregation of multi-instrument data in studies of critical transitions and resilience. Y1 - 2023 U6 - https://doi.org/10.5194/esd-14-173-2023 SN - 2190-4987 VL - 14 SP - 173 EP - 183 PB - Copernicus Publications CY - Göttingen ER - TY - THES A1 - Steding, Svenja T1 - Geochemical and Hydraulic Modeling of Cavernous Structures in Potash Seams T1 - Geochemische und hydraulische Modellierung kavernöser Strukturen in Kaliflözen N2 - Salt deposits offer a variety of usage types. These include the mining of rock salt and potash salt as important raw materials, the storage of energy in man-made underground caverns, and the disposal of hazardous substances in former mines. The most serious risk with any of these usage types comes from the contact with groundwater or surface water. It causes an uncontrolled dissolution of salt rock, which in the worst case can result in the flooding or collapse of underground facilities. Especially along potash seams, cavernous structures can spread quickly, because potash salts show a much higher solubility than rock salt. However, as their chemical behavior is quite complex, previous models do not account for these highly soluble interlayers. Therefore, the objective of the present thesis is to describe the evolution of cavernous structures along potash seams in space and time in order to improve hazard mitigation during the utilization of salt deposits. The formation of cavernous structures represents an interplay of chemical and hydraulic processes. Hence, the first step is to systematically investigate the dissolution and precipitation reactions that occur when water and potash salt come into contact. For this purpose, a geochemical reaction model is used. The results show that the minerals are only partially dissolved, resulting in a porous sponge like structure. With the saturation of the solution increasing, various secondary minerals are formed, whose number and type depend on the original rock composition. Field data confirm a correlation between the degree of saturation and the distance from the center of the cavern, where solution is entering. Subsequently, the reaction model is coupled with a flow and transport code and supplemented by a novel approach called ‘interchange’. The latter enables the exchange of solution and rock between areas of different porosity and mineralogy, and thus ultimately the growth of the cavernous structure. By means of several scenario analyses, cavern shape, growth rate and mineralogy are systematically investigated, taking also heterogeneous potash seams into account. The results show that basically four different cases can be distinguished, with mixed forms being a frequent occurrence in nature. The classification scheme is based on the dimensionless numbers Péclet and Damköhler, and allows for a first assessment of the hazard potential. In future, the model can be applied to any field case, using measurement data for calibration. The presented research work provides a reactive transport model that is able to spatially and temporally characterize the propagation of cavernous structures along potash seams for the first time. Furthermore, it allows to determine thickness and composition of transition zones between cavern center and unaffected salt rock. The latter is particularly important in potash mining, so that natural cavernous structures can be located at an early stage and the risk of mine flooding can thus be reduced. The models may also contribute to an improved hazard prevention in the construction of storage caverns and the disposal of hazardous waste in salt deposits. Predictions regarding the characteristics and evolution of cavernous structures enable a better assessment of potential hazards, such as integrity or stability loss, as well as of suitable mitigation measures. N2 - Salzlagerstätten bieten eine Vielzahl an Nutzungsmöglichkeiten. Diese umfassen den Abbau von Steinsalz und Kalisalz als wichtige Rohstoffe, die Speicherung von Energie in künstlich erzeugten Hohlräumen, sowie die Entsorgung gefährlicher Substanzen in stillgelegten Bergwerken. Die größte Gefahr bei jeder dieser Nutzungsarten ist der Kontakt mit Grund- oder Oberflächenwasser. Er bewirkt eine unkontrollierte Lösung des Salzgesteins, was im schlimmsten Fall zur Flutung oder zum Einsturz unterirdischer Infrastrukturen führt. Insbesondere entlang von Kaliflözen können sich kavernöse Strukturen schnell ausbreiten, da Kalisalze eine wesentlich höhere Löslichkeit besitzen als Steinsalz. Ihr chemisches Verhalten ist jedoch komplex, weshalb bisherige Modelle diese hochlöslichen Zwischenschichten vernachlässigen. Ziel der vorliegenden Doktorarbeit ist es daher, die Ausbreitung kavernöser Strukturen entlang von Kaliflözen räumlich und zeitlich zu beschreiben und damit die Möglichkeiten zur Gefahrenprävention bei der Nutzung von Salzlagerstätten zu verbessern. Die Bildung kavernöser Strukturen ist ein Zusammenspiel chemischer und hydraulischer Prozesse. Zunächst wird daher mithilfe eines geochemischen Reaktionsmodells systematisch untersucht, welche Lösungs- und Fällungsreaktionen beim Kontakt von Wasser und Kalisalz auftreten. Die Ergebnisse zeigen, dass nur ein Teil der Minerale gelöst wird, wodurch sich eine poröse, schwammartige Struktur bildet. Mit zunehmender Aufsättigung der Lösung treten verschiedene Sekundärminerale auf, deren Anzahl und Art vom Ausgangsgestein abhängen. Felddaten belegen dabei eine Korrelation zwischen Sättigungsgrad und Abstand vom Kavernenzentrum, wo die Lösung ein- und austritt. Anschließend wird das Reaktionsmodell mit einem Strömungs- und Transportcode gekoppelt und um einen neuartigen Ansatz namens "interchange" ergänzt. Dieser ermöglicht den Austausch von Lösung und Gestein zwischen Bereichen unterschiedlicher Porosität und Mineralogie, und damit letztlich das Wachstum der kavernösen Struktur. In mehreren Szenarienanalysen werden Kavernenform, Ausbreitungsgeschwindigkeit und Mineralogie systematisch untersucht und dabei auch heterogene Kaliflöze betrachtet. Die Ergebnisse zeigen, dass grundsätzlich vier Fälle zu unterscheiden sind, wobei in der Natur häufig Mischformen auftreten. Die Klassifizierung erfolgt auf Basis der dimensionslosen Kennzahlen Péclet und Damköhler und ermöglicht eine erste Abschätzung des Gefahrenpotentials. In Zukunft kann das Modell auf beliebige Feldbeispiele angewandt und mithilfe von Messdaten kalibriert werden. Die vorliegende Arbeit liefert ein reaktives Transportmodell, mit dem die Ausbreitung kavernöser Strukturen entlang von Kaliflözen erstmals räumlich und zeitlich beschrieben werden kann. Auch Mächtigkeit und Zusammensetzung der Übergangszone zwischen Kavernenzentrum und unberührtem Salzgestein können damit bestimmt werden. Letzteres ist insbesondere im Kalibergbau von Bedeutung, um natürliche kavernöse Strukturen rechtzeitig zu lokalisieren und damit das Risiko für eine Flutung von Bergwerken zu verringern. Auch bei der Herstellung von Speicherkavernen und der Einlagerung gefährlicher Substanzen im Salzgestein können die Modelle zu einer besseren Gefahrenprävention beitragen. Sie ermöglichen Prognosen über Beschaffenheit und Ausbreitungsverhalten kavernöser Strukturen, wodurch sowohl potentielle Gefahren, wie der Verlust von Dichtigkeit oder Stabilität, als auch geeignete Gegenmaßnahmen besser abschätzbar werden. KW - reactive transport KW - reaktiver Transport KW - salt rock KW - Salzgestein KW - water rock interactions KW - Wasser-Gesteins-Wechselwirkungen KW - density-driven flow KW - dichtegetriebene Strömung KW - PHREEQC Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-548182 ER - TY - THES A1 - Richter, Maximilian Jacob Enzo Amandus T1 - Continental rift dynamics across the scales T1 - Dynamiken kontinentaler Grabenbrüche über die Skalen BT - numerical modelling of localisation processes BT - numerische Modellierung von Lokalisations-Prozessen N2 - Localisation of deformation is a ubiquitous feature in continental rift dynamics and observed across drastically different time and length scales. This thesis comprises one experimental and two numerical modelling studies investigating strain localisation in (1) a ductile shear zone induced by a material heterogeneity and (2) in an active continental rift setting. The studies are related by the fact that the weakening mechanisms on the crystallographic and grain size scale enable bulk rock weakening, which fundamentally enables the formation of shear zones, continental rifts and hence plate tectonics. Aiming to investigate the controlling mechanisms on initiation and evolution of a shear zone, the torsion experiments of the experimental study were conducted in a Patterson type apparatus with strong Carrara marble cylinders with a weak, planar Solnhofen limestone inclusion. Using state-of-the-art numerical modelling software, the torsion experiments were simulated to answer questions regarding localisation procedure like stress distribution or the impact of rheological weakening. 2D numerical models were also employed to integrate geophysical and geological data to explain characteristic tectonic evolution of the Southern and Central Kenya Rift. Key elements of the numerical tools are a randomized initial strain distribution and the usage of strain softening. During the torsion experiments, deformation begins to localise at the limestone inclusion tips in a process zone, which propagates into the marble matrix with increasing deformation until a ductile shear zone is established. Minor indicators for coexisting brittle deformation are found close to the inclusion tip and presumed to slightly facilitate strain localisation besides the dominant ductile deformation processes. The 2D numerical model of the torsion experiment successfully predicts local stress concentration and strain rate amplification ahead of the inclusion in first order agreement with the experimental results. A simple linear parametrization of strain weaking enables high accuracy reproduction of phenomenological aspects of the observed weakening. The torsion experiments suggest that loading conditions do not affect strain localisation during high temperature deformation of multiphase material with high viscosity contrasts. A numerical simulation can provide a way of analysing the process zone evolution virtually and extend the examinable frame. Furthermore, the nested structure and anastomosing shape of an ultramylonite band was mimicked with an additional second softening step. Rheological weakening is necessary to establish a shear zone in a strong matrix around a weak inclusion and for ultramylonite formation. Such strain weakening laws are also incorporated into the numerical models of the Southern and Central Kenya Rift that capture the characteristic tectonic evolution. A three-stage early rift evolution is suggested that starts with (1) the accommodation of strain by a single border fault and flexure of the hanging-wall crust, after which (2) faulting in the hanging-wall and the basin centre increases before (3) the early-stage asymmetry is lost and basinward localisation of deformation occurs. Along-strike variability of rifts can be produced by modifying the initial random noise distribution. In summary, the three studies address selected aspects of the broad range of mechanisms and processes that fundamentally enable the deformation of rock and govern the localisation patterns across the scales. In addition to the aforementioned results, the first and second manuscripts combined, demonstrate a procedure to find new or improve on existing numerical formulations for specific rheologies and their dynamic weakening. These formulations are essential in addressing rock deformation from the grain to the global scale. As within the third study of this thesis, where geodynamic controls on the evolution of a rift were examined and acquired by the integration of geological and geophysical data into a numerical model. N2 - Die Lokalisierung von Deformation ist ein allgegenwärtiges Merkmal in der Dynamik von Grabenbrüchen bzw. Riftzonen und wird über verschiedene Zeit- und Längenskalen beobachtet. Diese Arbeit umfasst eine experimentelle und zwei numerische Studien zur Untersuchung der Lokalisierung von Deformation in (1) einer durch eine Materialheterogenität induzierten duktilen Scherzone und (2) in einem aktiven Kontinentalgraben. Die Studien verbindet, dass die Schwächungsmechanismen auf der kristallographischen Skala und der Korngrößenskala eine Enthärtung eines Gesteinkörpers ermöglicht, was im Wesentlichen die Bildung von Scherzonen, Grabenbrüchen und damit Plattentektonik ermöglicht. Um die Kontrollmechanismen für die Initiierung und Entwicklung einer Scherzone zu untersuchen, wurden die Torsionsexperimente der experimentellen Studie in einem Patterson-Gerät an starken Carrara-Marmorzylinder mit einer schwachen, planaren Solnhofen-Kalksteineinschluss durchgeführt. Mit modernster numerischer Modellierungssoftware wurden die Torsionsexperimente simuliert, um weitere Fragen zum Lokalisierungsablauf wie die Verteilung der Spannung oder den Einfluss rheologischer Schwächung zu beantworten. Numerische 2D-Modelle wurden auch verwendet, um geophysikalische und geologische Daten zu kombinieren, um die charakteristische tektonische Entwicklung des südlichen und zentralen Kenia-Rifts zu erklären. Schlüsselelemente der verwendeten numerischen Werkzeuge sind eine randomisierte Anfangsverteilung des Strain und der Einsatz von Strain basierter Enthärtung. Während der Torsionsversuche lokalisiert die Deformation zunächst an den Kalksteineinschlussspitzen in einer Prozesszone, die sich mit zunehmender Deformation in die Marmormatrix ausbreitet bis sich eine duktile Scherzone einstellt. Neben den dominierenden duktilen Verformungsprozessen werden geringfügige Indikatoren für eine koexistierende spröde Verformung nahe der Einschlussspitzen gefunden und es wird angenommen, dass diese die Lokalisierung der Deformation geringfügig erleichtern. In erster Ordnung sagt das numerische 2D-Modell des Torsionsexperiments erfolgreich lokale Spannungskonzentration und Strainratenverstärkung vor der Inklusion in Übereinstimmung mit den experimentellen Ergebnissen vorher. Eine einfache lineare Parametrisierung der Enthärtung durch Strain ermöglicht eine genaue Reproduktion phänomenologischer Aspekte der beobachteten Schwächung. Die Torsionsexperimente legen nahe, dass die Randbedingungen die Lokalisierung des Strain während der Hochtemperaturverformung von Mehrphasenmaterial mit hohen Viskositätskontrasten nicht beeinflussen. Die numerische Simulation ermöglicht es, die Entwicklung der Prozesszone virtuell zu analysieren und den Untersuchungsrahmen zu erweitern. Darüber hinaus wurde die verschachtelte Struktur und anastomosierende Form eines Ultramylonitbandes mit einem zusätzlichen zweiten Enthärtungsschritt nachgeahmt. Die rheologische Schwächung ist notwendig, um eine Scherzone in einer starken Matrix um einen schwachen Einschluss herum und für die Ultramylonitbildung zu etablieren. Solche Schwächungsgesetze, die auf Strain basieren, fließen auch in die numerischen Modelle des südlichen und zentralen Kenia-Rifts ein, die die charakteristische tektonische Entwicklung erfassen. Es wird eine dreistufige frühe Riftentwicklung vorgeschlagen, die mit (1) der Anpassung von Spannungen durch eine einzelne Grenzstörung und Biegung der hangenden Kruste beginnt, wonach (2) die Verwerfung im Hangenden und im Beckenzentrum zunimmt, bevor (3) die Asymmetrie des Frühstadiums verloren geht und es zu einer beckenseitigen Deformationslokalisierung kommt. Die Variabilität von Rissen entlang des Rifts kann durch Modifizieren der anfänglichen zufälligen Rauschverteilung erzeugt werden. Zusammenfassend befassen sich die drei Studien mit ausgewählten Aspekten der breiten Palette von Mechanismen und Prozessen, die die Deformation von Gestein grundlegend ermöglichen und die Lokalisierungsmuster über die Skalen bestimmen. Zusätzlich zu den oben genannten Ergebnissen demonstrieren das erste und zweite Manuskript in Kombination ein Verfahren, um neue oder bestehende numerische Formulierungen für spezifische Rheologien und deren dynamische Schwächung zu finden oder zu verbessern. Diese Formulierungen sind essenziell, um Gesteinsverformung von der Korngrößen bis zur globalen Skala zu untersuchen. Wie in der dritten Studie dieser Dissertation, in der geodynamische Kontrollen auf die Entwicklung eines Grabenbruchs durch die Integration geologischer und geophysikalischer Daten in ein numerisches Modell untersucht und erfasst wurden. KW - Strain Localisation KW - Continental Rifts KW - Torsion Experiments KW - Geodynamic Modelling KW - 2D Numerical Modelling KW - Lokalisierung von Deformation KW - Grabenbrüche KW - Geodynamische Modellierung KW - Torsionsexperimente KW - Numerische 2D Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-550606 ER - TY - THES A1 - Stettner, Samuel T1 - Exploring the seasonality of rapid Arctic changes from space T1 - Erkundung der Saisonalität schneller arktischer Veränderungen aus dem Weltraum BT - monitoring of permafrost disturbance, snow cover and vegetation in tundra environments with TerraSAR-X BT - Überwachung von Permafroststörungen, Schneebedeckung und Vegetation in Tundra-Umgebungen mit TerraSAR-X N2 - Arctic warming has implications for the functioning of terrestrial Arctic ecosystems, global climate and socioeconomic systems of northern communities. A research gap exists in high spatial resolution monitoring and understanding of the seasonality of permafrost degradation, spring snowmelt and vegetation phenology. This thesis explores the diversity and utility of dense TerraSAR-X (TSX) X-Band time series for monitoring ice-rich riverbank erosion, snowmelt, and phenology of Arctic vegetation at long-term study sites in the central Lena Delta, Russia and on Qikiqtaruk (Herschel Island), Canada. In the thesis the following three research questions are addressed: • Is TSX time series capable of monitoring the dynamics of rapid permafrost degradation in ice-rich permafrost on an intra-seasonal scale and can these datasets in combination with climate data identify the climatic drivers of permafrost degradation? • Can multi-pass and multi-polarized TSX time series adequately monitor seasonal snow cover and snowmelt in small Arctic catchments and how does it perform compared to optical satellite data and field-based measurements? • Do TSX time series reflect the phenology of Arctic vegetation and how does the recorded signal compare to in-situ greenness data from RGB time-lapse camera data and vegetation height from field surveys? To answer the research questions three years of TSX backscatter data from 2013 to 2015 for the Lena Delta study site and from 2015 to 2017 for the Qikiqtaruk study site were used in quantitative and qualitative analysis complimentary with optical satellite data and in-situ time-lapse imagery. The dynamics of intra-seasonal ice-rich riverbank erosion in the central Lena Delta, Russia were quantified using TSX backscatter data at 2.4 m spatial resolution in HH polarization and validated with 0.5 m spatial resolution optical satellite data and field-based time-lapse camera data. Cliff top lines were automatically extracted from TSX intensity images using threshold-based segmentation and vectorization and combined in a geoinformation system with manually digitized cliff top lines from the optical satellite data and rates of erosion extracted from time-lapse cameras. The results suggest that the cliff top eroded at a constant rate throughout the entire erosional season. Linear mixed models confirmed that erosion was coupled with air temperature and precipitation at an annual scale, seasonal fluctuations did not influence 22-day erosion rates. The results highlight the potential of HH polarized X-Band backscatter data for high temporal resolution monitoring of rapid permafrost degradation. The distinct signature of wet snow in backscatter intensity images of TSX data was exploited to generate wet snow cover extent (SCE) maps on Qikiqtaruk at high temporal resolution. TSX SCE showed high similarity to Landsat 8-derived SCE when using cross-polarized VH data. Fractional snow cover (FSC) time series were extracted from TSX and optical SCE and compared to FSC estimations from in-situ time-lapse imagery. The TSX products showed strong agreement with the in-situ data and significantly improved the temporal resolution compared to the Landsat 8 time series. The final combined FSC time series revealed two topography-dependent snowmelt patterns that corresponded to in-situ measurements. Additionally TSX was able to detect snow patches longer in the season than Landsat 8, underlining the advantage of TSX for detection of old snow. The TSX-derived snow information provided valuable insights into snowmelt dynamics on Qikiqtaruk previously not available. The sensitivity of TSX to vegetation structure associated with phenological changes was explored on Qikiqtaruk. Backscatter and coherence time series were compared to greenness data extracted from in-situ digital time-lapse cameras and detailed vegetation parameters on 30 areas of interest. Supporting previous results, vegetation height corresponded to backscatter intensity in co-polarized HH/VV at an incidence angle of 31°. The dry, tall shrub dominated ecological class showed increasing backscatter with increasing greenness when using the cross polarized VH/HH channel at 32° incidence angle. This is likely driven by volume scattering of emerging and expanding leaves. Ecological classes with more prostrate vegetation and higher bare ground contributions showed decreasing backscatter trends over the growing season in the co-polarized VV/HH channels likely a result of surface drying instead of a vegetation structure signal. The results from shrub dominated areas are promising and provide a complementary data source for high temporal monitoring of vegetation phenology. Overall this thesis demonstrates that dense time series of TSX with optical remote sensing and in-situ time-lapse data are complementary and can be used to monitor rapid and seasonal processes in Arctic landscapes at high spatial and temporal resolution. N2 - Die Erwärmung der Arktis hat Auswirkungen auf die Stabilität und Funktion terrestrischer arktischer Ökosysteme, auf das globale Klima, sowie auf sozioökonomische Systeme nördlicher Gemeinden. Es besteht eine Forschungslücke bei der Überwachung der Saisonalität von Permafrostdegradation, Schneebedeckung und Vegetationsphänologie. Diese Dissertation untersucht den Nutzen von TerraSAR-X (TSX) X-Band Daten für die Überwachung eisreicher Ufererosion, Schneeschmelze, sowie Phänologie arktischer Vegetation im zentralen Lena Delta in Russland und auf Qikiqtaruk (Herschel Island), Kanada. Die Dynamik intrasaisonaler eisreicher Ufererosion im zentralen Lena-Delta in Russland wurde mit TSX Rückstreuintensitätsbildern quantifiziert und mit optischen Satelliten-Daten und Feldmessungen validiert. Kliff Kanten wurden automatisch aus TSX-Intensitätsbildern extrahiert und in einem Geoinformationssystem mit manuell digitalisierten Kliff Kanten aus optischen Satellitendaten, sowie mit Erosionsraten aus Zeitrafferkameras zusammengeführt. Die Ergebnisse deuten darauf hin, dass sich die Kliff Kante während der gesamten Auftauzeit mit konstanter Geschwindigkeit zurückzog. Die Verwendung von linearen Mischmodellen bestätigte, dass die Erosion im jährlichen Maßstab mit der Lufttemperatur und dem Niederschlag gekoppelt war, saisonale Schwankungen beeinflussten die Erosionsrate nicht. Die Ergebnisse stützen die Verwendung von TSX zur Überwachung schneller Permafrostdegradation mit hoher zeitlicher Auflösung. Die eindeutige Signatur von nassem Schnee in TSX Rückstreuintensitätsbildern wurde genutzt, um Schneeverteilungskarten (SCE) auf Qikiqtaruk in hoher zeitlicher Auflösung zu erzeugen. Aus TSX abgeleitete SCE zeigten eine große Ähnlichkeit zu SCE aus Landsat 8 Daten. Zeitreihen von prozentualer Schneebedeckung (FSC) wurden aus TSX und optischen SCE extrahiert und mit FSC-Schätzungen aus in-situ Zeitrafferkamera Daten verglichen. Auch hier zeigte TSX eine starke Übereinstimmung mit den in-situ-Daten und verbesserte die zeitliche Auflösung im Vergleich zur Landsat 8 Zeitreihe erheblich. Aus einer finalen kombinierten FSC-Zeitreihe konnten zwei Muster von Schneeschmelzen in ausgewählten Einzugsgebieten abgeleitet werden, die sich mit den in-situ Messungen deckten. Zusätzlich konnte TSX später in der Saison Schnee länger erkennen als Landsat 8, was den Vorteil von TSX zur Erkennung von Altschnee unterstreicht. Die TSX-abgeleiteten Schnee-Informationen lieferten wertvolle Einblicke in die Schneeschmelz-Dynamik auf Qikiqtaruk, welche zuvor nicht verfügbar waren. Die Empfindlichkeit von TSX für Vegetationsstruktur, die mit phänologischen Veränderungen einhergeht, wurde auf Qikiqtaruk untersucht. Rückstreu- und Kohärenzzeitreihen wurden aus 30 Testgebieten extrahiert. Die Rückstreu- und Kohärenzsignale wurden mit Vitalitäts-Daten verglichen, die aus in-situ-Zeitrafferkamera Zeitreihen extrahiert wurden. Die Ergebnisse zeigten einen Zusammenhang zwischen Vegetationshöhe und der Rückstreuintensität in HH / VV polarisierten Daten bei einem Einfallswinkel von 31 °. Ferner zeigte die ökologische Klasse mit einer Kombination von hohen Sträuchern und trockenen Oberflächenbedingungen eine zunehmende Rückstreuung mit zunehmende Pflanzenvitalität, wenn der kreuzpolarisierte VH / HH-Kanal bei 32 ° Einfallswinkel verwendet wurde. Die Ergebnisse aus strauchdominierten Klassen sind vielversprechend und liefern eine ergänzende Datenquelle für zeitlich hochaufgelöste Beobachtung der Vegetationsphänologie. Insgesamt zeigt diese Arbeit, dass TSX X-Band-Daten schnelle und saisonale Prozesse in arktischen Landschaften mit hoher räumlicher und zeitlicher Auflösung überwachen können. KW - SAR KW - remote sensing KW - arctic KW - SAR KW - Fernerkundung KW - Arktis Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425783 ER - TY - GEN A1 - Elsenbeer, Helmut A1 - West, Adam A1 - Bonell, Mike T1 - Hydrologic pathways and stormflow hydrochemistry at South Creek, northeast Queensland N2 - Earlier investigations at South Creek in northeastern Queensland established the importance of overland flow as a hydrologic pathway in this tropical rainforest environment. Since this pathway is ‘fast’, transmitting presumably ‘new’ water, its importance should be reflected in the stormflow chemistry of South Creek: the greater the volumentric contribution to the stormflow hydrograph, the more similarity between the chemical composition of streamwater and of overland flow is to be expected. Water samples were taken during two storm events in an ephemeral gully (gully A), an intermittent gully (gully B) and at the South Creek catchment outlet; additional spot checks were made in several poorly defined rills. The chemical composition of ‘old’ water was determined from 45 baseflow samples collected throughout February. The two events differed considerably in their magnitudes, intensities and antecedent moisture conditions. In both events, the stormflow chemistry in South Creek was characterized by a sharp decrease in Ca, Mg, Na, Si, Cl, EC, ANC, alkalinity and total inorganic carbon. pH remained nearly constant with discharge, whereas K increased sharply, as did sulfate in an ill-defined manner. In event 1, this South Creek stormflow pattern was closely matched by the pattern in gully A, implying a dominant contribution of ‘new’ water. This match was confirmed by the spot samples from rills. Gully B behaved like South Creek itself, but with a dampened ‘new’ water signal, indicating less overland flow generation in its subcatchment. In event 2, which occurred five days later, the initial ‘new’ water signal in gully A was rapidly overwhelmed by a different signal which is attributed to rapid drainage from a perched water table. This study shows that stormflow in this rainforest catchment consists predominantly of ‘new’ water which reaches the stream channel via ‘fast’ pathways. Where the ephemeral gullies delivering overland flow are incised deeply enough to intersect a perched water table, a delayed, ‘old’ water-like signal may be transmitted. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 046 Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-16904 ER - TY - THES A1 - Beamish, Alison Leslie T1 - Hyperspectral remote sensing of the spatial and temporal heterogeneity of low Arctic vegetation T1 - Hyperspektrale Fernerkundung der räumlichen und zeitlichen Heterogenität niedriger arktischer Vegetation BT - the role of phenology, vegetation colour, and intrinsic ecosystem components BT - die Rolle von Phänologie, Vegetationsfarbe und intrinsischer Ökosystemkomponenten N2 - Arctic tundra ecosystems are experiencing warming twice the global average and Arctic vegetation is responding in complex and heterogeneous ways. Shifting productivity, growth, species composition, and phenology at local and regional scales have implications for ecosystem functioning as well as the global carbon and energy balance. Optical remote sensing is an effective tool for monitoring ecosystem functioning in this remote biome. However, limited field-based spectral characterization of the spatial and temporal heterogeneity limits the accuracy of quantitative optical remote sensing at landscape scales. To address this research gap and support current and future satellite missions, three central research questions were posed: • Does canopy-level spectral variability differ between dominant low Arctic vegetation communities and does this variability change between major phenological phases? • How does canopy-level vegetation colour images recorded with high and low spectral resolution devices relate to phenological changes in leaf-level photosynthetic pigment concentrations? • How does spatial aggregation of high spectral resolution data from the ground to satellite scale influence low Arctic tundra vegetation signatures and thereby what is the potential of upcoming hyperspectral spaceborne systems for low Arctic vegetation characterization? To answer these questions a unique and detailed database was assembled. Field-based canopy-level spectral reflectance measurements, nadir digital photographs, and photosynthetic pigment concentrations of dominant low Arctic vegetation communities were acquired at three major phenological phases representing early, peak and late season. Data were collected in 2015 and 2016 in the Toolik Lake Research Natural Area located in north central Alaska on the North Slope of the Brooks Range. In addition to field data an aerial AISA hyperspectral image was acquired in the late season of 2016. Simulations of broadband Sentinel-2 and hyperspectral Environmental and Mapping Analysis Program (EnMAP) satellite reflectance spectra from ground-based reflectance spectra as well as simulations of EnMAP imagery from aerial hyperspectral imagery were also obtained. Results showed that canopy-level spectral variability within and between vegetation communities differed by phenological phase. The late season was identified as the most discriminative for identifying many dominant vegetation communities using both ground-based and simulated hyperspectral reflectance spectra. This was due to an overall reduction in spectral variability and comparable or greater differences in spectral reflectance between vegetation communities in the visible near infrared spectrum. Red, green, and blue (RGB) indices extracted from nadir digital photographs and pigment-driven vegetation indices extracted from ground-based spectral measurements showed strong significant relationships. RGB indices also showed moderate relationships with chlorophyll and carotenoid pigment concentrations. The observed relationships with the broadband RGB channels of the digital camera indicate that vegetation colour strongly influences the response of pigment-driven spectral indices and digital cameras can track the seasonal development and degradation of photosynthetic pigments. Spatial aggregation of hyperspectral data from the ground to airborne, to simulated satel-lite scale was influenced by non-photosynthetic components as demonstrated by the distinct shift of the red edge to shorter wavelengths. Correspondence between spectral reflectance at the three scales was highest in the red spectrum and lowest in the near infra-red. By artificially mixing litter spectra at different proportions to ground-based spectra, correspondence with aerial and satellite spectra increased. Greater proportions of litter were required to achieve correspondence at the satellite scale. Overall this thesis found that integrating multiple temporal, spectral, and spatial data is necessary to monitor the complexity and heterogeneity of Arctic tundra ecosystems. The identification of spectrally similar vegetation communities can be optimized using non-peak season hyperspectral data leading to more detailed identification of vegetation communities. The results also highlight the power of vegetation colour to link ground-based and satellite data. Finally, a detailed characterization non-photosynthetic ecosystem components is crucial for accurate interpretation of vegetation signals at landscape scales. N2 - Die arktische Erwärmung beeinflusst Produktivität, Wachstums, Artenzusammensetzung, Phänologie und den Reproduktionserfolg arktischer Vegetation, mit Auswirkungen auf die Ökosystemfunktionen sowie auf den globalen Kohlenstoff- und Energiehaushalt. Feldbasierte Messungen und spektrale Charakterisierungen der räumlichen und zeitlichen Heterogenität arktischer Vegetationsgemeinschaften sind limitiert und die Genauigkeit fernerkundlicher Methoden im Landschaftsmaßstab eingeschränkt. Um diese Forschungslücke zu schließen und aktuelle und zukünftige Satellitenmissionen zu unterstützen, wurden drei zentrale Forschungsfragen entwickelt: 1) Wie unterscheidet sich die spektrale Variabilität des Kronendaches zwischen dominanten Vegetationsgemeinschaften der niederen Arktis und wie verändert sich diese Variabilität zwischen den wichtigsten phänologischen Phasen? 2) Wie hängen Aufnahmen der Vegetationsfarbe des Kronendaches von hoch und niedrig auflösenden Geräten mit phänologischen Veränderungen des photosynthetischen Pigmentgehalts auf Blattebene zusammen? 3) Wie beeinflusst die räumliche Aggregation von Daten mit hoher spektraler Auflösung von der Boden- bis zur Satelliten-Skala die arktischen Vegetationssignale der Tundra und welches Potenzial haben zukünftige hyperspektraler Satellitensysteme für die arktische Vegetationscharakterisierung? Zur Beantwortung dieser Fragen wurde eine detaillierte Datenbank aus feldbasierten Daten erstellt und mit hyperspektralen Luftbildern sowie multispektralen Sentinel-2 und simulierten hyperspektralen EnMAP Satellitendaten verglichen. Die Ergebnisse zeigten, dass die Spätsai-son am besten geeignet ist um dominante Vegetationsgemeinschaften mit Hilfe von hyper-spektralen Daten zu identifizieren. Ebenfalls konnte gezeigt werden, dass die mit handelsüb-lichen Digitalkameras aufgenommene Vegetationsfarbe pigmentgesteuerte Spektralindizes stark beeinflusst und den Verlauf von photosynthetischen Pigmenten nachverfolgen kann. Die räumliche Aggregation hyperspektraler Daten von der Boden- über die Luft- zur Satelli-tenskala wurde durch nicht-photosynthetische Komponenten beeinflusst und die spektralen Reflexionsvermögen der drei Skalen stimmten im roten Spektrum am höchsten und im nahen Infrarotbereich am niedrigsten überein. Die vorliegende Arbeit zeigt, dass die Integration zeitlicher, spektraler und räumlicher Daten notwendig ist, um Komplexität und Heterogenität arktischer Vegetationsreaktionen in Reaktion auf klimatische Veränderungen zu überwachen. KW - hyperspectral remote sensing KW - Arctic tundra KW - vegetation KW - imaging spectroscopy KW - hyperspektral Fernerkundung KW - arktische Tundra KW - Vegetation KW - Spektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425922 ER - TY - THES A1 - Pätzel, Jonas T1 - Seismic site characterization using broadband and DAS ambient vibration measurements on Mt Etna, Italy N2 - Both horizontal-to-vertical (H/V) spectral ratios and the spatial autocorrelation method (SPAC) have proven to be valuable tools to gain insight into local site effects by ambient noise measurements. Here, the two methods are employed to assess the subsurface velocity structure at the Piano delle Concazze area on Mt Etna. Volcanic tremor records from an array of 26 broadband seismometers is processed and a strong variability of H/V ratios during periods of increased volcanic activity is found. From the spatial distribution of H/V peak frequencies, a geologic structure in the north-east of Piano delle Concazze is imaged which is interpreted as the Ellittico caldera rim. The method is extended to include both velocity data from the broadband stations and distributed acoustic sensing data from a co-located 1.5 km long fibre optic cable. High maximum amplitude values of the resulting ratios along the trajectory of the cable coincide with known faults. The outcome also indicates previously unmapped parts of a fault. The geologic interpretation is in good agreement with inversion results from magnetic survey data. Using the neighborhood algorithm, spatial autocorrelation curves obtained from the modified SPAC are inverted alone and jointly with the H/V peak frequencies for 1D shear wave velocity profiles. The obtained models are largely consistent with published models and were able to validate the results from the fibre optic cable. N2 - Sowohl die räumliche Autokorrelations-Methode (SPAC) als auch die Methode der horizontal-vertikal Spektralverhältnisse (H/V) sind wichtige Instrumente bei der seismischen Charakterisierung des Untergrundes mittels Bodenunruhe. In der vorliegenden Arbeit werden beide Techniken angewandt, um die Geschwindigkeitsstruktur der Piano delle Concazze Ebene auf dem Ätna zu untersuchen. Die Aufzeichnungen vulkanischen Tremors auf einem Array aus 26 Breitband-Seismometern werden prozessiert und starke Schwankungen des H/V Verhältnisses, insbesondere während Zeiten erhöhter vulkanischer Aktivität werden festgestellt. Die räumliche Verteilung der H/V Frequenzpeaks bildet eine geologische Struktur im nordöstlichen Bereichs des Untersuchungsgebietes ab. Diese wird als der alte Rand der Ellittico Caldera interpretiert. Die H/V-Methode wird um die kombinierte Verarbeitung von Geschwindigkeitsaufzeichnungen des Breitband-Arrays und faseroptischen Dehnungmessungen (distributed acoustic sensing, DAS) erweitert. Hierfür werden die Daten eines 1,5 km langen Glasfaserkabels, mit welchem das Seismometer-Array zusammen installiert wurde, genutzt. Erhöhte Werte der maximalen Amplitude der berechneten Spektralverhältnisse, stimmen mit der Lage bekannter Verwerfungen im Gebiet überein. Das Ergebnis deutet auf einen bisher nicht aufgezeichneten Verlauf einer der Verwerfungszonen hin. Die Interpretaion der Strukturen stimmt überein mit den Ergebnissen einer Geomagnetik-Studie der Piano delle Concazze. Mithilfe des Neighborhood-Algorithmus werden die räumlichen Autokorrelationskurven der modifizierten SPAC, sowohl einfach als auch in Kombination mit den H/V Frequenzpeaks, invertiert. So werden schließlich 1D Modelle der S-Wellengeschwindigkeit abgeleitet. Diese stimmen weitgehend überein mit den Resultaten anderer Studien und bestätigen darüberhinaus die Ergebnisse der DAS-Aufzeichnungen. KW - site characterization KW - Etna KW - DAS KW - ambient vibration KW - seismic noise KW - H/V KW - HVSR KW - velocity model KW - SPAC KW - MSPAC KW - spatial autocorrelation KW - Piano delle Concazze KW - site effects KW - microzonation KW - volcanic tremor KW - joint inversion KW - ortsverteile faseroptische Dehnungsmessung KW - Ätna KW - H/V KW - horizontal-vertikales Spektralverhältnis KW - räumliche Autkorrelationsmethode KW - modifizierte räumliche Autkorrelationsmethode KW - Bodenunruhe KW - gemeinsame Inversion KW - Mikrozonierung KW - seismisches Rauschen KW - Ortscharakterisierung KW - Ortseffekte KW - räumliche Autokorrelation KW - Geschwindigkeitsmodell KW - vulkanischer Tremor KW - Piano delle Concazze Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613793 ER - TY - JOUR A1 - Tofelde, Stefanie A1 - Bernhardt, Anne A1 - Guerit, Laure A1 - Romans, Brian W. T1 - Times Associated With Source-to-Sink Propagation of Environmental Signals During Landscape Transience JF - Frontiers in Earth Science N2 - Sediment archives in the terrestrial and marine realm are regularly analyzed to infer changes in climate, tectonic, or anthropogenic boundary conditions of the past. However, contradictory observations have been made regarding whether short period events are faithfully preserved in stratigraphic archives; for instance, in marine sediments offshore large river systems. On the one hand, short period events are hypothesized to be non-detectable in the signature of terrestrially derived sediments due to buffering during sediment transport along large river systems. On the other hand, several studies have detected signals of short period events in marine records offshore large river systems. We propose that this apparent discrepancy is related to the lack of a differentiation between different types of signals and the lack of distinction between river response times and signal propagation times. In this review, we (1) expand the definition of the term ‘signal’ and group signals in sub-categories related to hydraulic grain size characteristics, (2) clarify the different types of ‘times’ and suggest a precise and consistent terminology for future use, and (3) compile and discuss factors influencing the times of signal transfer along sediment routing systems and how those times vary with hydraulic grain size characteristics. Unraveling different types of signals and distinctive time periods related to signal propagation addresses the discrepancies mentioned above and allows a more comprehensive exploration of event preservation in stratigraphy – a prerequisite for reliable environmental reconstructions from terrestrially derived sedimentary records. KW - signal propagation KW - landscape transience KW - source-to-sink KW - stratigraphy KW - response time Y1 - 2021 U6 - https://doi.org/10.3389/feart.2021.628315 SN - 2296-6463 VL - 9 SP - 1 EP - 26 PB - Frontiers Media CY - Lausanne, Schweiz ER - TY - THES A1 - Witt, Tanja Ivonne T1 - Camera Monitoring at volcanoes T1 - Kameramonitoring an Vulkanen BT - Identification and characterization of lava fountain activity and near-vent processes and their relevance for early warning systems BT - Identifikation und Charakterizierung der Aktivität von Lavafontänen und Near-Vent Prozesse und deren Relevanz für Frühwarnsysteme N2 - Basaltic fissure eruptions, such as on Hawai'i or on Iceland, are thought to be driven by the lateral propagation of feeder dikes and graben subsidence. Associated solid earth processes, such as deformation and structural development, are well studied by means of geophysical and geodetic technologies. The eruptions themselves, lava fountaining and venting dynamics, in turn, have been much less investigated due to hazardous access, local dimension, fast processes, and resulting poor data availability. This thesis provides a detailed quantitative understanding of the shape and dynamics of lava fountains and the morphological changes at their respective eruption sites. For this purpose, I apply image processing techniques, including drones and fixed installed cameras, to the sequence of frames of video records from two well-known fissure eruptions in Hawai'i and Iceland. This way I extract the dimensions of multiple lava fountains, visible in all frames. By putting these results together and considering the acquisition times of the frames I quantify the variations in height, width and eruption velocity of the lava fountains. Then I analyse these time-series in both time and frequency domains and investigate the similarities and correlations between adjacent lava fountains. Following this procedure, I am able to link the dynamics of the individual lava fountains to physical parameters of the magma transport in the feeder dyke of the fountains. The first case study in this thesis focuses on the March 2011 Pu'u'O'o eruption, Hawai'i, where a continuous pulsating behaviour at all eight lava fountains has been observed. The lava fountains, even those from different parts of the fissure that are closely connected, show a similar frequency content and eruption behaviour. The regular pattern in the heights of lava fountain suggests a controlling process within the magma feeder system like a hydraulic connection in the underlying dyke, affecting or even controlling the pulsating behaviour. The second case study addresses the 2014-2015 Holuhraun fissure eruption, Iceland. In this case, the feeder dyke is highlighted by the surface expressions of graben-like structures and fault systems. At the eruption site, the activity decreases from a continuous line of fire of ~60 vents to a limited number of lava fountains. This can be explained by preferred upwards magma movements through vertical structures of the pre-eruptive morphology. Seismic tremors during the eruption reveal vent opening at the surface and/or pressure changes in the feeder dyke. The evolving topography of the cinder cones during the eruption interacts with the lava fountain behaviour. Local variations in the lava fountain height and width are controlled by the conduit diameter, the depth of the lava pond and the shape of the crater. Modelling of the fountain heights shows that long-term eruption behaviour is controlled mainly by pressure changes in the feeder dyke. This research consists of six chapters with four papers, including two first author and two co-author papers. It establishes a new method to analyse lava fountain dynamics by video monitoring. The comparison with the seismicity, geomorphologic and structural expressions of fissure eruptions shows a complex relationship between focussed flow through dykes, the morphology of the cinder cones, and the lava fountain dynamics at the vents of a fissure eruption. N2 - Basaltische Spalteneruptionen, wie auf Hawaii oder Island, werden vermutlich durch die laterale Ausbreitung von Förderdikes und damit verbundener Grabenbildung verursacht. Prozesse der festen Erde sind mittels geophysikalischer und geodätischer Technologien gut erforscht. Die Ausbrüche selbst, d.h. die Lavafontä}nen und die Ventdynamik wiederum wurden aufgrund des gefährlichen Zugangs, der lokalen Dimension, der schnellen Prozesse und der daraus resultierenden schlechten Datenverfügbarkeit kaum untersucht. Diese Arbeit liefert ein detailliertes quantitatives Verständnis über Form und Dynamik von Lavafontänen und der morphologischen Veränderungen an ihren jeweiligen Eruptionsstellen. Mittels Bildverarbeitungstechniken, einschließlich Dronen und festen Kameras, wurden von mir die Videoframes von zwei bekannten Spaltausbrüchen auf Hawaii und Island ausgewertet. Auf diese Weise extrahiere ich die Dimensionen mehrerer Lavafontänen, die in allen Frames sichtbar sind. Durch die Zusammenstellung dieser Ergebnisse und unter Berücksichtigung der Erfassungszeiten quantifiziere ich die Schwankungen in Höhe, Breite und Eruptionsgeschwindigkeit. Dann analysiere ich diese Zeitreihen im Zeit- und Frequenzbereich und untersuche die Ähnlichkeiten und Zusammenhänge zwischen benachbarten Lavafontänen. Anschließend verknüpfte ich die Dynamik der einzelnen Lavafontänen mit den physikalischen Parametern des Magmatransports im Förderdike. Die erste Fallstudie dieser Arbeit konzentriert sich auf die Pu'u'O'o Ausbruch, Hawaii im März 2011, bei der ein kontinuierliches pulsierendes Verhalten an allen Lavafontänen beobachtet werden konnte. Lavafontänen verschiedener Teilsegmenten der Spalte sind eng miteinander verbunden, sie weisen Ähnlichkeiten im Frequenzgehalt und Ausbruchsverhalten auf. Das regelmäßige Muster in den Lavafontänenhöhen deutet auf eine hydraulische Verbindung im darunter liegenden Dike als steuernden Prozess innerhalb des Magma-Fördersystems hin. Die zweite Fallstudie befasst sich mit dem Holuhraun-Ausbruch 2014/2015. In diesem Fall wird der horizontale Förderdike durch grabenartige Strukturen und Bruchsysteme an der Oberfläche hervorgehoben. An der Ausbruchsstelle nimmt die Aktivität von einer kontinuierlichen Feuerlinie auf einzelne Lavafontänen ab. Dies lässt sich durch eine bevorzugte Aufwärtsbewegung des Magmas durch vertikale Strukturen der prä-eruptiven Morphologie erklären. Seismische Erschütterungen während des Ausbruchs zeigen Ventöffnungen an der Oberfläche und/oder Druckveränderungen im Förderdike. Die sich während des Ausbruchs entwickelnde Topographie der Schlackenkegel interagiert mit dem Verhalten der Lavafontänen. Lokale Schwankungen in Höhe und Breite der Lavafontäne werden jedoch durch den Schlotdurchmesser, die Tiefe des Lavaponds und die Form des Kraters gesteuert. Die Modellierung der Fontänenhöhe zeigt, dass das langfristige Ausbruchsverhalten vor allem durch Druckänderungen im Förderdike gesteuert wird. Diese Forschungsarbeit besteht aus sechs Kapiteln mit je zwei Papern als Erst- bzw. Co-Autor. Es etabliert eine neue Methode zur Analyse der Dynamik von Lavafontänen durch Videoüberwachung. Der Vergleich mit der Seismizität, den geomorphologischen und strukturellen Ausprägungen von Spalteneruptionen zeigt einen komplexen Zusammenhang zwischen der Dikeströmung, der Vulkanmorphologie und der Dynamik der Lavafontänen an einer Spalteneruption. KW - volcanology KW - Spalteneruption KW - fissure eruption KW - Vulkanologie KW - lava fountains KW - video analysis KW - basaltic volcanoes KW - Lavafontänen KW - Videoanalyse KW - Basalt-Vulkane Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421073 ER - TY - JOUR A1 - Purinton, Benjamin A1 - Bookhagen, Bodo T1 - Beyond Vertical Point Accuracy BT - Assessing Inter-pixel Consistency in 30 m Global DEMs for the Arid Central Andes JF - Frontiers in Earth Science N2 - Quantitative geomorphic research depends on accurate topographic data often collected via remote sensing. Lidar, and photogrammetric methods like structure-from-motion, provide the highest quality data for generating digital elevation models (DEMs). Unfortunately, these data are restricted to relatively small areas, and may be expensive or time-consuming to collect. Global and near-global DEMs with 1 arcsec (∼30 m) ground sampling from spaceborne radar and optical sensors offer an alternative gridded, continuous surface at the cost of resolution and accuracy. Accuracy is typically defined with respect to external datasets, often, but not always, in the form of point or profile measurements from sources like differential Global Navigation Satellite System (GNSS), spaceborne lidar (e.g., ICESat), and other geodetic measurements. Vertical point or profile accuracy metrics can miss the pixel-to-pixel variability (sometimes called DEM noise) that is unrelated to true topographic signal, but rather sensor-, orbital-, and/or processing-related artifacts. This is most concerning in selecting a DEM for geomorphic analysis, as this variability can affect derivatives of elevation (e.g., slope and curvature) and impact flow routing. We use (near) global DEMs at 1 arcsec resolution (SRTM, ASTER, ALOS, TanDEM-X, and the recently released Copernicus) and develop new internal accuracy metrics to assess inter-pixel variability without reference data. Our study area is in the arid, steep Central Andes, and is nearly vegetation-free, creating ideal conditions for remote sensing of the bare-earth surface. We use a novel hillshade-filtering approach to detrend long-wavelength topographic signals and accentuate short-wavelength variability. Fourier transformations of the spatial signal to the frequency domain allows us to quantify: 1) artifacts in the un-projected 1 arcsec DEMs at wavelengths greater than the Nyquist (twice the nominal resolution, so > 2 arcsec); and 2) the relative variance of adjacent pixels in DEMs resampled to 30-m resolution (UTM projected). We translate results into their impact on hillslope and channel slope calculations, and we highlight the quality of the five DEMs. We find that the Copernicus DEM, which is based on a carefully edited commercial version of the TanDEM-X, provides the highest quality landscape representation, and should become the preferred DEM for topographic analysis in areas without sufficient coverage of higher-quality local DEMs. KW - DEM noise KW - Fourier analysis KW - TanDEM-X KW - ASTER GDEM KW - Copernicus DEM KW - WorldDEM KW - SRTM KW - ALOS World 3D Y1 - 2021 U6 - https://doi.org/10.3389/feart.2021.758606 SN - 2296-6463 SP - 1 EP - 24 PB - Frontiers Media CY - Lausanne, Schweiz ER -