TY - JOUR A1 - Csáky, Moritz T1 - Habsburg Central Europe BT - Culturally Heterogeneous and Polysemous Regions JF - PaRDeS N2 - Central Europe is characterized by linguistic and cultural density as well as by endogenous and exogenous cultural influences. These constellations were especially visible in the former Habsburg Empire, where they influenced the formation of individual and collective identities. This led not only to continual crises and conflicts, but also to an equally enormous creative potential as became apparent in the culture of the fin-de-siècle. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-645995 SN - 978-3-86956-574-3 SN - 1614-6492 SN - 1862-7684 IS - 29 SP - 31 EP - 37 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Ye, Fangyuan A1 - Zhang, Shuo A1 - Warby, Jonathan A1 - Wu, Jiawei A1 - Gutierrez-Partida, Emilio A1 - Lang, Felix A1 - Shah, Sahil A1 - Saglamkaya, Elifnaz A1 - Sun, Bowen A1 - Zu, Fengshuo A1 - Shoai, Safa A1 - Wang, Haifeng A1 - Stiller, Burkhard A1 - Neher, Dieter A1 - Zhu, Wei-Hong A1 - Stolterfoht, Martin A1 - Wu, Yongzhen T1 - Overcoming C₆₀-induced interfacial recombination in inverted perovskite solar cells by electron-transporting carborane JF - Nature Communications N2 - Inverted perovskite solar cells still suffer from significant non-radiative recombination losses at the perovskite surface and across the perovskite/C₆₀ interface, limiting the future development of perovskite-based single- and multi-junction photovoltaics. Therefore, more effective inter- or transport layers are urgently required. To tackle these recombination losses, we introduce ortho-carborane as an interlayer material that has a spherical molecular structure and a three-dimensional aromaticity. Based on a variety of experimental techniques, we show that ortho-carborane decorated with phenylamino groups effectively passivates the perovskite surface and essentially eliminates the non-radiative recombination loss across the perovskite/C₆₀ interface with high thermal stability. We further demonstrate the potential of carborane as an electron transport material, facilitating electron extraction while blocking holes from the interface. The resulting inverted perovskite solar cells deliver a power conversion efficiency of over 23% with a low non-radiative voltage loss of 110 mV, and retain >97% of the initial efficiency after 400 h of maximum power point tracking. Overall, the designed carborane based interlayer simultaneously enables passivation, electron-transport and hole-blocking and paves the way toward more efficient and stable perovskite solar cells. Y1 - 2022 U6 - https://doi.org/10.1038/s41467-022-34203-x SN - 2041-1723 VL - 13 IS - 1 PB - Springer Nature CY - London ER - TY - JOUR A1 - Perkins, Anita A1 - Rose, Andrew A1 - Grossart, Hans-Peter A1 - Rojas-Jimenez, Keilor Osvaldo A1 - Barroso Prescott, Selva Kiri A1 - Oakes, Joanne M. T1 - Oxic and Anoxic Organic Polymer Degradation Potential of Endophytic Fungi From the Marine Macroalga, Ecklonia radiata JF - Frontiers in Microbiology N2 - Cellulose and chitin are the most abundant polymeric, organic carbon source globally. Thus, microbes degrading these polymers significantly influence global carbon cycling and greenhouse gas production. Fungi are recognized as important for cellulose decomposition in terrestrial environments, but are far less studied in marine environments, where bacterial organic matter degradation pathways tend to receive more attention. In this study, we investigated the potential of fungi to degrade kelp detritus, which is a major source of cellulose in marine systems. Given that kelp detritus can be transported considerable distances in the marine environment, we were specifically interested in the capability of endophytic fungi, which are transported with detritus, to ultimately contribute to kelp detritus degradation. We isolated 10 species and two strains of endophytic fungi from the kelp Ecklonia radiata. We then used a dye decolorization assay to assess their ability to degrade organic polymers (lignin, cellulose, and hemicellulose) under both oxic and anoxic conditions and compared their degradation ability with common terrestrial fungi. Under oxic conditions, there was evidence that Ascomycota isolates produced cellulose-degrading extracellular enzymes (associated with manganese peroxidase and sulfur-containing lignin peroxidase), while Mucoromycota isolates appeared to produce both lignin and cellulose-degrading extracellular enzymes, and all Basidiomycota isolates produced lignin-degrading enzymes (associated with laccase and lignin peroxidase). Under anoxic conditions, only three kelp endophytes degraded cellulose. We concluded that kelp fungal endophytes can contribute to cellulose degradation in both oxic and anoxic environments. Thus, endophytic kelp fungi may play a significant role in marine carbon cycling via polymeric organic matter degradation. KW - kelp KW - fungi KW - endophytes KW - carbon cycling KW - extracellular enzymes KW - cellulose polymeric organic matter Y1 - 2021 U6 - https://doi.org/10.3389/fmicb.2021.726138 SN - 1664-302X VL - 12 SP - 1 EP - 13 PB - Frontiers in microbiology CY - Lausanne, Schweiz ER - TY - THES A1 - Martin, Johannes T1 - Synthesis of protein-polymer conjugates and block copolymers via sortase-mediated ligation N2 - In den vergangenen Jahrzehnten haben therapeutische Proteine in der pharmazeutischen Industrie mehr und mehr an Bedeutung gewonnen. Werden Proteine nichtmenschlichen Ursprungs verwendet, kann es jedoch zu einer Immunreaktion kommen, sodass das Protein sehr schnell aus dem Körper ausgeschieden oder abgebaut wird. Um die Zirkulationszeit im Blut signifikant zu verlängern, werden die Proteine mit synthetischen Polymeren modifiziert (Protein-Polymer-Konjugate). Die Proteine aller heute auf dem Markt erhältlichen Medikamente dieser Art tragen eine oder mehrere Polymerketten aus Poly(ethylenglycol) (PEG). Ein Nachteil der PEGylierung ist, dass viele Patienten bei regelmäßiger Einnahme dieser Medikamente Antikörper gegen PEG entwickeln, die den effizienzsteigernden Effekt der PEGylierung wieder aufheben. Ein weiterer Nachteil der PEGylierung ist die oftmals deutlich verringerte Aktivität der Konjugate im Vergleich zum nativen Protein. Der Grund dafür ist die Herstellungsmethode der Konjugate, bei der meist die primären Amine der Lysin-Seitenketten und der N-Terminus des Proteins genutzt werden. Da die meisten Proteine mehrere gut zugängliche Lysine aufweisen, werden oft unterschiedliche und teilweise mehrere Lysine mit PEG funktionalisiert, was zu einer Mischung an Regioisomeren führt. Je nach Position der PEG-Kette kann das aktive Zentrum abgeschirmt oder die 3D-Struktur des Proteins verändert werden, was zu einem teilweise drastischen Aktivitätsabfall führt. In dieser Arbeit wurde eine neuartige Methode zur Ligation von Makromolekülen untersucht. Die Verwendung eines Enzyms als Katalysator zur Verbindung zweier Makromoleküle ist bisher wenig untersucht und ineffizient. Als Enzym wurde Sortase A ausgewählt, eine gut untersuchte Ligase aus der Familie der Transpeptidasen, welche die Ligation zweier Peptide katalysieren kann. Ein Nachteil dieser Sortase-vermittelten Ligation ist, dass es sich um eine Gleichgewichtsreaktion handelt, wodurch hohe Ausbeuten schwierig zu erreichen sind. Im Rahmen dieser Dissertation wurden zwei zuvor entwickelte Methoden zur Verschiebung des Gleichgewichts ohne Einsatz eines großen Überschusses von einem Edukt für Makromoleküle überprüft. Zur Durchführung der Sortase-vermittelten Ligation werden zwei komplementäre Peptidsequenzen verwendet, die Erkennungssequenz und das Nukleophil. Um eine systematische Untersuchung durchführen zu können, wurden alle nötigen Bausteine (Protein-Erkennungssequenz zur Reaktion mit Nukleophil-Polymer und Polymer-Erkennungssequenz mit Nukleophil-Protein) hergestellt. Als Polymerisationstechnik wurde die radikalische Polymerisation mit reversibler Deaktivierung (im Detail, Atom Transfer Radical Polymerization, ATRP und Reversible Addition-Fragmentation Chain Transfer, RAFT polymerization) gewählt, um eine enge Molmassenverteilung zu erreichen. Die Herstellung der Bausteine begann mit der Synthese der Peptide via automatisierter Festphasen-Peptidsynthese, um eine einfache Änderung der Peptidsequenz zu gewährleisten und um eine Modifizierung der Polymerkette nach der Polymerisation zu umgehen. Um die benötigte unterschiedliche Funktionalität der zwei Peptidsequenzen (freier C-Terminus bei der Erkennungssequenz bzw. freier N-Terminus bei dem Nukleophil) zu erreichen, wurden verschiedene Linker zwischen Harz und Peptid verwendet. Danach wurde der Kettenüberträger (chain transfer agent, CTA) zur Kontrolle der Polymerisation mit dem auf dem Harz befindlichen Peptid gekoppelt. Die für die anschließende Polymerisation verwendeten Monomere basierten auf Acrylamiden und Acrylaten und wurden anhand ihrer Eignung als Alternativen zu PEG ausgewählt. Es wurde eine kürzlich entwickelte Technik basierend auf der RAFT-Polymerisation (xanthate-supported photo-iniferter RAFT, XPI-RAFT) verwendet um eine Reihe an Peptid-Polymeren mit unterschiedlichen Molekulargewichten und engen Molekulargewichtsverteilungen herzustellen. Nach Entfernung der Schutzgruppen der Peptid-Seitenketten wurden die Peptid-Polymere zunächst genutzt, um mittels Sortase-vermittelter Ligation zwei Polymerketten zu einem Blockcopolymer zu verbinden. Unter Verwendung von Ni2+-Ionen in Kombination mit einer Verlängerung der Erkennungssequenz um ein Histidin zur Unterdrückung der Rückreaktion konnte ein maximaler Umsatz von 70 % erreicht werden. Dabei zeigte sich ein oberes Limit von durchschnittlich 100 Wiederholungseinheiten; die Ligation von längeren Polymeren war nicht erfolgreich. Danach wurden ein Modellprotein und ein Nanobody mit vielversprechenden medizinischen Eigenschaften mit den für die enzymkatalysierte Ligation benötigten Peptidsequenzen für die Kopplung mit den zuvor hergestellten Peptid-Polymeren verwendet. Dabei konnte bei Verwendung des Modellproteins keine Bildung von Protein-Polymer-Konjugaten beobachtet werden. Der Nanobody konnte dagegen C-terminal mit einem Polymer funktionalisiert werden. Dabei wurde eine ähnliche Limitierung in der Polymer-Kettenlänge beobachtet wie zuvor. Die auf Ni-Ionen basierte Strategie zur Gleichgewichtsverschiebung hatte hier keinen ausschlaggebenden Effekt, während die Verwendung von einem Überschuss an Polymer zur vollständigen Umsetzung des Edukt-Nanobody führte. Die erhaltenen Daten aus diesem Projekt bilden eine gute Basis für weitere Forschung in dem vielversprechenden Feld der enzymkatalysierten Herstellung von Protein-Polymer-Konjugaten und Blockcopolymeren. Langfristig könnte diese Herangehensweise eine vielseitig einsetzbare Herstellungsmethode von ortsspezifischen therapeutischen Protein-Polymer Konjugaten darstellen, welche sowohl eine hohe Aktivität als auch eine lange Zirkulationszeit im Blut aufweisen. N2 - During the last decades, therapeutical proteins have risen to great significance in the pharmaceutical industry. As non-human proteins that are introduced into the human body cause a distinct immune system reaction that triggers their rapid clearance, most newly approved protein pharmaceuticals are shielded by modification with synthetic polymers to significantly improve their blood circulation time. All such clinically approved protein-polymer conjugates contain polyethylene glycol (PEG) and its conjugation is denoted as PEGylation. However, many patients develop anti-PEG antibodies which cause a rapid clearance of PEGylated molecules upon repeated administration. Therefore, the search for alternative polymers that can replace PEG in therapeutic applications has become important. In addition, although the blood circulation time is significantly prolonged, the therapeutic activity of some conjugates is decreased compared to the unmodified protein. The reason is that these conjugates are formed by the traditional conjugation method that addresses the protein's lysine side chains. As proteins have many solvent exposed lysines, this results in a somewhat uncontrolled attachment of polymer chains, leading to a mixture of regioisomers, with some of them eventually affecting the therapeutic performance. This thesis investigates a novel method for ligating macromolecules in a site-specific manner, using enzymatic catalysis. Sortase A is used as the enzyme: It is a well-studied transpeptidase which is able to catalyze the intermolecular ligation of two peptides. This process is commonly referred to as sortase-mediated ligation (SML). SML constitutes an equilibrium reaction, which limits product yield. Two previously reported methods to overcome this major limitation were tested with polymers without using an excessive amount of one reactant. Specific C- or N-terminal peptide sequences (recognition sequence and nucleophile) as part of the protein are required for SML. The complementary peptide was located at the polymer chain end. Grafting-to was used to avoid damaging the protein during polymerization. To be able to investigate all possible combinations (protein-recognition sequence and nucleophile-protein as well as polymer-recognition sequence and nucleophile-polymer) all necessary building blocks were synthesized. Polymerization via reversible deactivation radical polymerization (RDRP) was used to achieve a narrow molecular weight distribution of the polymers, which is required for therapeutic use. The synthesis of the polymeric building blocks was started by synthesizing the peptide via automated solid-phase peptide synthesis (SPPS) to avoid post-polymerization attachment and to enable easy adaptation of changes in the peptide sequence. To account for the different functionalities (free N- or C-terminus) required for SML, different linker molecules between resin and peptide were used. To facilitate purification, the chain transfer agent (CTA) for reversible addition-fragmentation chain-transfer (RAFT) polymerization was coupled to the resin-immobilized recognition sequence peptide. The acrylamide and acrylate-based monomers used in this thesis were chosen for their potential to replace PEG. Following that, surface-initiated (SI) ATRP and RAFT polymerization were attempted, but failed. As a result, the newly developed method of xanthate-supported photo-iniferter (XPI) RAFT polymerization in solution was used successfully to obtain a library of various peptide-polymer conjugates with different chain lengths and narrow molar mass distributions. After peptide side chain deprotection, these constructs were used first to ligate two polymers via SML, which was successful but revealed a limit in polymer chain length (max. 100 repeat units). When utilizing equimolar amounts of reactants, the use of Ni2+ ions in combination with a histidine after the recognition sequence to remove the cleaved peptide from the equilibrium maximized product formation with conversions of up to 70 %. Finally, a model protein and a nanobody with promising properties for therapeutical use were biotechnologically modified to contain the peptide sequences required for SML. Using the model protein for C- or N-terminal SML with various polymers did not result in protein-polymer conjugates. The reason is most likely the lack of accessibility of the protein termini to the enzyme. Using the nanobody for C-terminal SML, on the other hand, was successful. However, a similar polymer chain length limit was observed as in polymer-polymer SML. Furthermore, in case of the synthesis of protein-polymer conjugates, it was more effective to shift the SML equilibrium by using an excess of polymer than by employing the Ni2+ ion strategy. Overall, the experimental data from this work provides a good foundation for future research in this promising field; however, more research is required to fully understand the potential and limitations of using SML for protein-polymer synthesis. In future, the method explored in this dissertation could prove to be a very versatile pathway to obtain therapeutic protein-polymer conjugates that exhibit high activities and long blood circulation times. KW - biohybrid molecules KW - sortaseA KW - polymerization KW - RAFT KW - ATRP KW - peptide synthesis KW - enzymatic conjugation KW - sortagging Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-645669 ER - TY - BOOK A1 - Denz, Rebekka T1 - Bundistinnen BT - Frauen im Allgemeinen Jüdischen Arbeiterbund („Bund“) dargestellt anhand der jiddischen Biographiensammlung „Doires Bundistn“ T3 - Pri ha-Pardes N2 - Pri ha-Pardes (Früchte des Obstgartens) ist eine Reihe der Vereinigung für Jüdische Studien e.V., welche in Verbindung mit dem Zentrum für Jüdische Studien der Universität Potsdam publiziert wird. Pri ha-Pardes möchte kleineren wissenschaftlichen Studien, Forschungen am Rande der großen Disziplinen und exzellenten Masterarbeiten eine Publikationsplattform bieten. Im fünften Band der Reihe Pri ha-Pardes skizziert Rebekka Denz die Geschichte von Frauen im Allgemeinen Jüdischen Arbeiterbund („Bund“) seit seiner Gründung 1897 bis zum Jahr 1939. Durch das Prisma der gewählten Hauptquelle ─ die Frauenbiographien der „Doires Bundistn“, einer jiddischsprachigen Biographiensammlung verfasst von Mitgliedern des „Bund“ ─ werden das Mitwirken und die Bedeutung von Frauen in dieser sozialistischen, jiddischistischen Bewegung Ost(mittel)europas dargestellt. Zudem wird ein erster Versuch unternommen, diesen Teil der bundischen Parteigeschichtsschreibung hinsichtlich ihrer (Re-) Konstruktionsprinzipien zu lesen. Die Arbeit gliedert sich dabei analog zum bundischen Selbstverständnis und der geographischen Verschiebung seines Hauptwirkungsfeldes in zwei Teile: Frauen im „Russischen Bund“ (1897-1917) und Frauen im „Polnischen Bund“ (1918-1939). Die Auswirkungen der unterschiedlichen historischen Kontexte auf lebensweltliche Aspekte, Tätigkeiten in Bewegung und Partei sowie Tendenzen der Lebensgestaltung der Bundistinnen werden anhand von drei Vergleichskapiteln aufgezeigt; weitere Einzelkapitel behandeln zeitspezifische Aspekte. Die Instabilität der Lebensverhältnisse für die Mitglieder im illegalen „Russischen Bund“ bzw. die größere Stabilität in der Zeit des „Bund“ in Polen als legale Partei bilden wichtige, bislang vernachlässigte Faktoren bei der Betrachtung der weiblichen Lebensmuster. N2 - In this publication the history of women active in the General Jewish Workers Bund (Bund) is outlined from its foundation 1897 up to 1939. The taken main sources are the women biographies of “Doires Bundistn”, a collection of biographies written in Yiddish by members of the Bund. Through the prism of these texts the work and importance of women in this socialist, Yiddishistic movement in Eastern and Middle Europe are presented. Furthermore a first attempt is made to read this part of Bundist party history concerning its principles of (re-)construction. The publication consists of two parts which are based on the Bundist self-concept and the geographical dislocation of its main field: Women in the “Russian Bund” (1897-1918) and women in the “Polish Bund” (1918-1939). The impact of the different historical contexts on lifestyle aspects, activities in the movement or rather in the party, the complex of themes concerning the way of living of female Bundists are pointed out in three comparative chapters. In other chapters it is dealt with themes specific for the different periods. The instability of the living conditions for the members of the illegal “Russian Bund” or the larger stability in the time of the “Polish Bund” as a legal party generates important, up to now neglected factors while examining the paradigms of female life styles. T3 - Pri ha-Pardes - 5 KW - Allgemeiner Jüdischer Arbeiterbund KW - Jiddisch KW - Biografie KW - Bund KW - Gender Forschung KW - Sozialismus KW - Judentum KW - General Jewish Workers KW - Yiddish KW - biography KW - Bund KW - Gender studies KW - socialism KW - Jewry/Judaism Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-27889 SN - 978-3-940793-58-4 SN - 1863-7442 SN - 2191-4540 IS - 5 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Denz, Rebekka A1 - Stellmacher, Martha A1 - Ullrich, Rebecca A1 - Benar, Jael Andra A1 - Uličná, Lenka A1 - Martini, Annett A1 - Allgaier-Honal, Recha A1 - Abramowicz, Isidoro A1 - Ariel, Neri Y. A1 - Stürzebecher, Maria A1 - Weinhold, Beate A1 - Singer-Brehm, Elisabeth ED - Denz, Rebekka ED - Stellmacher, Martha ED - Ullrich, Rebecca T1 - Genisa-Blätter IV N2 - Auch wenn Genisot – jüdische Ablagen nicht mehr verwendeter Bücher und Kultgegenstände – in der bisherigen historischen Forschung selten beachtet werden, sind sie als Quellen aus originär jüdischer Hand von hoher Bedeutung und können unser Verständnis der Umsetzung von Ritualen im Kontext der lokalen Gemeinde vertiefen. Der Schwerpunkt der ‚Genisa-Blätter IV‘ liegt auf Fragen nach jüdisch-rituellen Praktiken und ihrer Bedeutung, ihren Objekten und Akteuren. Acht wissenschaftliche und ein essayistischer Beitrag nähern sich diesen Themen über konkrete Funde aus Genisot mitteleuropäischer jüdischer Gemeinden, von religiösen Texten wie dem Fragment einer Torarolle und einem Minhagim-Buch über Personaldokumente bis hin zu Musiknoten und Kleidungsstücken. KW - Genisa KW - Jüdische Studien KW - Ritual KW - Ländliches Judentum KW - Geniza KW - Jewish Studies KW - ritual KW - Rural Jewry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-555356 SN - 978-3-86956-539-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Denz, Rebekka A1 - Stellmacher, Martha A1 - Ullrich, Rebecca T1 - Einleitung JF - Genisa-Blätter IV Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-584843 SN - 978-3-86956-539-2 SP - 9 EP - 13 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Fischer, Martin H. A1 - Winter, Bodo A1 - Felisatti, Arianna A1 - Myachykov, Andriy A1 - Jeglinski-Mende, Melinda A. A1 - Shaki, Samuel T1 - More instructions make fewer subtractions JF - Frontiers in psychology / Frontiers Research Foundation N2 - Research on problem solving offers insights into how humans process task-related information and which strategies they use (Newell and Simon, 1972; Öllinger et al., 2014). Problem solving can be defined as the search for possible changes in one's mind (Kahneman, 2003). In a recent study, Adams et al. (2021) assessed whether the predominant problem solving strategy when making changes involves adding or subtracting elements. In order to do this, they used several examples of simple problems, such as editing text or making visual patterns symmetrical, either in naturalistic settings or on-line. The essence of the authors' findings is a strong preference to add rather than subtract elements across a diverse range of problems, including the stabilizing of artifacts, creating symmetrical patterns, or editing texts. More specifically, they succeeded in demonstrating that “participants were less likely to identify advantageous subtractive changes when the task did not (vs. did) cue them to consider subtraction, when they had only one opportunity (vs. several) to recognize the shortcomings of an additive search strategy or when they were under a higher (vs. lower) cognitive load” (Adams et al., 2021, p. 258). Addition and subtraction are generally defined as de-contextualized mathematical operations using abstract symbols (Russell, 1903/1938). Nevertheless, understanding of both symbols and operations is informed by everyday activities, such as making or breaking objects (Lakoff and Núñez, 2000; Fischer and Shaki, 2018). The universal attribution of “addition bias” or “subtraction neglect” to problem solving activities is perhaps a convenient shorthand but it overlooks influential framing effects beyond those already acknowledged in the report and the accompanying commentary (Meyvis and Yoon, 2021). Most importantly, while Adams et al.'s study addresses an important issue, their very method of verbally instructing participants, together with lack of control over several known biases, might render their findings less than conclusive. Below, we discuss our concerns that emerged from the identified biases, namely those regarding the instructions and the experimental materials. Moreover, we refer to research from mathematical cognition that provides new insights into Adams et al.'s findings. KW - problem solving KW - addition KW - subtraction KW - cognitive bias KW - SNARC Y1 - 2021 U6 - https://doi.org/10.3389/fpsyg.2021.720616 SN - 1664-1078 VL - 12 SP - 1 EP - 3 PB - Frontiers Research Foundation CY - Lausanne, Schweiz ER -