TY - THES A1 - Werhahn, Maria T1 - Simulating galaxy evolution with cosmic rays: the multi-frequency view T1 - Galaxienentwicklung in Simulationen mit komischer Strahlung und deren Strahlungsprozessen N2 - Cosmic rays (CRs) constitute an important component of the interstellar medium (ISM) of galaxies and are thought to play an essential role in governing their evolution. In particular, they are able to impact the dynamics of a galaxy by driving galactic outflows or heating the ISM and thereby affecting the efficiency of star-formation. Hence, in order to understand galaxy formation and evolution, we need to accurately model this non-thermal constituent of the ISM. But except in our local environment within the Milky Way, we do not have the ability to measure CRs directly in other galaxies. However, there are many ways to indirectly observe CRs via the radiation they emit due to their interaction with magnetic and interstellar radiation fields as well as with the ISM. In this work, I develop a numerical framework to calculate the spectral distribution of CRs in simulations of isolated galaxies where a steady-state between injection and cooling is assumed. Furthermore, I calculate the non-thermal emission processes arising from the modelled CR proton and electron spectra ranging from radio wavelengths up to the very high-energy gamma-ray regime. I apply this code to a number of high-resolution magneto-hydrodynamical (MHD) simulations of isolated galaxies, where CRs are included. This allows me to study their CR spectra and compare them to observations of the CR proton and electron spectra by the Voyager-1 satellite and the AMS-02 instrument in order to reveal the origin of the measured spectral features. Furthermore, I provide detailed emission maps, luminosities and spectra of the non-thermal emission from our simulated galaxies that range from dwarfs to Milk-Way analogues to starburst galaxies at different evolutionary stages. I successfully reproduce the observed relations between the radio and gamma-ray luminosities with the far-infrared (FIR) emission of star-forming (SF) galaxies, respectively, where the latter is a good tracer of the star-formation rate. I find that highly SF galaxies are close to the limit where their CR population would lose all of their energy due to the emission of radiation, whereas CRs tend to escape low SF galaxies more quickly. On top of that, I investigate the properties of CR transport that are needed in order to match the observed gamma-ray spectra. Furthermore, I uncover the underlying processes that enable the FIR-radio correlation (FRC) to be maintained even in starburst galaxies and find that thermal free-free-emission naturally explains the observed radio spectra in SF galaxies like M82 and NGC 253 thus solving the riddle of flat radio spectra that have been proposed to contradict the observed tight FRC. Lastly, I scrutinise the steady-state modelling of the CR proton component by investigating for the first time the influence of spectrally resolved CR transport in MHD simulations on the hadronic gamma-ray emission of SF galaxies revealing new insights into the observational signatures of CR transport both spectrally and spatially. N2 - Kosmische Strahlung (CR) ist ein essentieller Bestandteil des interstellaren Mediums (ISM) von Galaxien und spielt eine wichtige Rolle in deren Entwicklung. Insbesondere ist sie in der Lage, die Dynamik einer Galaxie zu beeinflussen, indem sie galaktische Ausflüsse treibt oder das ISM aufheizt und sich dadurch auf die Effizienz der Sternentstehung auswirkt. Um Galaxienentstehung zu verstehen ist es daher notwendig, diesen nicht-thermischen Bestandteil des ISM genau zu modellieren. Aber außerhalb unserer lokalen Umgebung innerhalb der Milchstraße haben wir keine Möglichkeit, um CRs in anderen Galaxien direkt zu messen. Allerdings gibt es viele Möglichkeiten, CRs indirekt über die Strahlung zu beobachten, die sie auf Grund ihrer Interaktion mit Magnetfeldern und interstellarer Strahlung sowie mit dem ISM emittieren. In dieser Arbeit habe ich einen numerischen Code entwickelt, der die spektrale Verteilung der CRs in Simulationen von isolierten Galaxien berechnet, wobei ein stationäres Verhältnis zwischen Injektion und Kühlen angenommen wird. Des Weiteren berechnet er die nicht-thermischen Strahlungsprozesse, die aus den modellierten CR Protonen- und Elektronenspektren hervorgehen. Diese reichen von Radiowellenlängen bis hin zu hochenergetischer Gammastrahlung. Ich wende diesen Code auf eine Vielzahl von hoch aufgelösten, magneto-hydrodynamischen Simulationen von isolierten Galaxien an, die CRs beinhalten. Das ermöglicht es mir, ihre CR Spektren zu untersuchen und mit Beobachtungen des Voyager-1 Satelliten sowie des AMS-02 Instruments von CR Protonen- und Elektronenspektren zu vergleichen, um dem Ursprung von den gemessenen spektralen Besonderheiten nachzugehen. Außerdem lege ich detaillierte Emissionskarten, Leuchtkräfte und Spektren der nicht-thermischen Strahlung unserer simulierten Galaxien vor, die von Zwerggalaxien über Milchstraßen-ähnliche Galaxien bis hin zu Starburst-Galaxien bei verschiedensten Entwicklungsstadien reichen. Damit kann ich erfolgreich die beobachteten Zusammenhänge zwischen jeweils der Radio- und Gammastrahlungsleuchtkraft mit der Ferninfrarot (FIR) Strahlung der sternbildenden Galaxien reproduzieren, wobei die FIR Strahlung ein guter Indikator für die Rate der Sternentstehung ist. Dabei finde ich heraus, dass Galaxien mit einer hohen Rate an Sternentstehung sehr nah an dem Limit sind, in dem ihre CR Population all ihre Energie an die Produktion von Strahlung verlieren würde, während CRs dazu tendieren, Galaxien mit einer niedrigen Sternentstehungsrate schneller zu verlassen. Zusätzlich untersuche ich die Eigenschaften des Transports von CRs, die benötigt werden, um die beobachteten Spektren der Gammastrahlung zu reproduzieren. Außerdem decke ich die zugrundeliegenden physikalischen Prozesse auf, durch die die Korrelation zwischen der FIR- und Radioleuchtkraft auch in Starburst-Galaxien aufrecht erhalten werden kann und finde heraus, dass die thermische Emission natürlicherweise die beobachteten Radiospektren in Galaxien wie M82 und NGC 253 erklärt, wodurch sich das Rätsel der flachen Radiospektren löst, die scheinbar im Widerspruch zum beobachteten engen Zusammenhang zwischen der FIR- und Radioleuchtkraft standen. Zuletzt hinterfrage ich die Annahme eines stationären Zustandes bei der Modellierung der CR Protonenspektren, indem ich zum ersten Mal den Einfluss von spektral aufgelöstem Transport von CR Protonen in magneto-hydrodynamischen Simulationen auf die hadronische Gammastrahlung von sternbildenden Galaxien untersuche, was neue Einblicke in beobachtbare Signaturen, sowohl spektral als auch räumlich, von CR-Transport ermöglicht. KW - galaxies KW - cosmic rays KW - numerical astrophysics KW - kosmische Strahlung KW - Galaxien KW - numerische Astrophysik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572851 ER - TY - JOUR A1 - Smith, Taylor A1 - Zotta, Ruxandra-Maria A1 - Boulton, Chris A. A1 - Lenton, Timothy M. A1 - Dorigo, Wouter A1 - Boers, Niklas T1 - Reliability of resilience estimation based on multi-instrument time series JF - Earth System Dynamics N2 - Many widely used observational data sets are comprised of several overlapping instrument records. While data inter-calibration techniques often yield continuous and reliable data for trend analysis, less attention is generally paid to maintaining higher-order statistics such as variance and autocorrelation. A growing body of work uses these metrics to quantify the stability or resilience of a system under study and potentially to anticipate an approaching critical transition in the system. Exploring the degree to which changes in resilience indicators such as the variance or autocorrelation can be attributed to non-stationary characteristics of the measurement process – rather than actual changes in the dynamical properties of the system – is important in this context. In this work we use both synthetic and empirical data to explore how changes in the noise structure of a data set are propagated into the commonly used resilience metrics lag-one autocorrelation and variance. We focus on examples from remotely sensed vegetation indicators such as vegetation optical depth and the normalized difference vegetation index from different satellite sources. We find that time series resulting from mixing signals from sensors with varied uncertainties and covering overlapping time spans can lead to biases in inferred resilience changes. These biases are typically more pronounced when resilience metrics are aggregated (for example, by land-cover type or region), whereas estimates for individual time series remain reliable at reasonable sensor signal-to-noise ratios. Our work provides guidelines for the treatment and aggregation of multi-instrument data in studies of critical transitions and resilience. Y1 - 2023 U6 - https://doi.org/10.5194/esd-14-173-2023 SN - 2190-4987 VL - 14 SP - 173 EP - 183 PB - Copernicus Publications CY - Göttingen ER - TY - THES A1 - Kruse, Marlen T1 - Characterization of biomolecules and their interactions using electrically controllable DNA nanolevers N2 - In this work, binding interactions between biomolecules were analyzed by a technique that is based on electrically controllable DNA nanolevers. The technique was applied to virus-receptor interactions for the first time. As receptors, primarily peptides on DNA nanostructures and antibodies were utilized. The DNA nanostructures were integrated into the measurement technique and enabled the presentation of the peptides in a controllable geometrical order. The number of peptides could be varied to be compatible to the binding sites of the viral surface proteins. Influenza A virus served as a model system, on which the general measurability was demonstrated. Variations of the receptor peptide, the surface ligand density, the measurement temperature and the virus subtypes showed the sensitivity and applicability of the technology. Additionally, the immobilization of virus particles enabled the measurement of differences in oligovalent binding of DNA-peptide nanostructures to the viral proteins in their native environment. When the coronavirus pandemic broke out in 2020, work on binding interactions of a peptide from the hACE2 receptor and the spike protein of the SARS-CoV-2 virus revealed that oligovalent binding can be quantified in the switchSENSE technology. It could also be shown that small changes in the amino acid sequence of the spike protein resulted in complete loss of binding. Interactions of the peptide and inactivated virus material as well as pseudo virus particles could be measured. Additionally, the switchSENSE technology was utilized to rank six antibodies for their binding affinity towards the nucleocapsid protein of SARS-CoV-2 for the development of a rapid antigen test device. The technique was furthermore employed to show binding of a non-enveloped virus (adenovirus) and a virus-like particle (norovirus-like particle) to antibodies. Apart from binding interactions, the use of DNA origami levers with a length of around 50 nm enabled the switching of virus material. This proved that the technology is also able to size objects with a hydrodynamic diameter larger than 14 nm. A theoretical work on diffusion and reaction-limited binding interactions revealed that the technique and the chosen parameters enable the determination of binding rate constants in the reaction-limited regime. Overall, the applicability of the switchSENSE technique to virus-receptor binding interactions could be demonstrated on multiple examples. While there are challenges that remain, the setup enables the determination of affinities between viruses and receptors in their native environment. Especially the possibilities regarding the quantification of oligo- and multivalent binding interactions could be presented. N2 - In dieser Arbeit wurden Bindungsinteraktionen zwischen biologischen Molekülen mit Hilfe von elektrisch kontrollierbaren DNA-Nanohebeln untersucht. Die Technologie wurde zum ersten Mal auf Virus-Rezeptor Interaktionen angewendet. Als Rezeptoren wurden überwiegend Peptide und Antikörper untersucht. Die Peptide wurden auf vierarmigen DNA-Nanohebeln angeordnet. Ihre geometrische Anordnung entsprach der Anordnung der Rezeptorbindungsstellen der Proteine auf der Virusoberfläche. An Influenza A Viren wurde die Machbarkeit der Bindungsmessung zuerst demonstriert. Dabei konnte die Anwendbarkeit und Sensitivität der Technologie durch Variation der Peptide, der Ligandendichte auf der Sensoroberfläche, der Messtemperatur und der Virussubtypen gezeigt werden. Weiterhin wurde Virusmaterial auf der Sensoroberfläche immobilisiert und anschließend wurden quantitative Bindungsmessungen mit den oligovalenten DNA-Peptid-Strukturen durchgeführt. Dieser Versuchsaufbau ermöglichte die Messung der Bindungsstärke in Abhängigkeit der Anzahl der pro DNA-Struktur gekoppelten Peptide. Im Zuge des Ausbruchs der Coronavirus-Pandemie im Jahr 2020 wurden Bindungsinteraktionsmessungen zwischen einem Peptid aus dem hACE2-Rezeptor und SARS-CoV-2 Spike Proteinen durchgeführt. Auch hier konnten oligovalente Bindungseffekte quantifiziert werden. Außerdem wurde festgestellt, dass Veränderungen an der Aminosäuresequenz des SARS-CoV-2 Proteins starke Auswirkungen auf das Bindungsverhalten hatten. Auch Interaktionen zwischen dem Peptid und sowohl inaktiviertem Virusmaterial als auch Pseudoviruspartikeln wurden gemessen. Für die Entwicklung eines Antigenschnelltests wurden die Affinitäten von sechs Antikörpern an das Nucleocapsidprotein des SARS-CoV-2 bestimmt. Weiterhin konnte gezeigt werden, dass mit der Technologie auch die Bindung von unbehüllten Viren (am Beispiel von Adenoviren) und Virus-ähnlichen Partikeln (am Beispiel von Norovirus-ähnlichen Partikeln) an Antikörper vermessen werden kann. Neben Bindungsinteraktionen, wurden auch Größenbestimmungen mit Hilfe von DNA Origamis durchgeführt. Die Hebellänge von ca. 50 nm ermöglichte die elektrische Bewegung ("switching") von Virusmaterial. Es konnte so gezeigt werden, dass die Technologie es ermöglicht, Objekte mit einem hydrodynamischen Durchmesser von mehr als 14 nm zu bewegen. In einer theoretischen Betrachtung der Experimente konnte gezeigt werden, dass der Sensoraufbau und die verwendeten Parameter die Messung von Bindungsratenkonstanten in einem Reaktions-limitierten Bereich ermöglichen. Insgesamt konnte die Arbeit an vielen Beispielen zeigen, dass die switch-SENSE Technologie für die Messung von Virus-Rezeptor Interaktionen geeignet ist. Während es weiterhin Herausforderungen gibt, so ermöglicht der Aufbau doch die Bestimmung von Affinitäten zwischen Viren und Rezeptoren. Insbesondere die Möglichkeiten zur Quantifizierung von oligo- und multivalenten Bindungsinteraktionen konnten aufgezeigt werden. T2 - Charakterisierung von Biomolekülen und deren Interaktionen mittels elektrisch kontrollierbarer DNA Nanohebel KW - biomolecule KW - binding interactions KW - switchSENSE KW - virus KW - receptor KW - Biomoleküle KW - Bindungsinteraktion KW - switchSENSE Technologie KW - Virus KW - Rezeptor Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-577384 ER - TY - THES A1 - Drobyshev, Evgenii T1 - Toxic or beneficial? What is the role of food-relevant selenium species selenoneine? T1 - Giftig oder nützlich? Welche Rolle spielt die lebensmittelrelevante Selenspezies Selenonein? N2 - Selenium (Se) is an essential trace element that is ubiquitously present in the environment in small concentrations. Essential functions of Se in the human body are manifested through the wide range of proteins, containing selenocysteine as their active center. Such proteins are called selenoproteins which are found in multiple physiological processes like antioxidative defense and the regulation of thyroid hormone functions. Therefore, Se deficiency is known to cause a broad spectrum of physiological impairments, especially in endemic regions with low Se content. Nevertheless, being an essential trace element, Se could exhibit toxic effects, if its intake exceeds tolerable levels. Accordingly, this range between deficiency and overexposure represents optimal Se supply. However, this range was found to be narrower than for any other essential trace element. Together with significantly varying Se concentrations in soil and the presence of specific bioaccumulation factors, this represents a noticeable difficulty in the assessment of Se epidemiological status. While Se is acting in the body through multiple selenoproteins, its intake occurs mainly in form of small organic or inorganic molecular mass species. Thus, Se exposure not only depends on daily intake but also on the respective chemical form, in which it is present. The essential functions of selenium have been known for a long time and its primary forms in different food sources have been described. Nevertheless, analytical capabilities for a comprehensive investigation of Se species and their derivatives have been introduced only in the last decades. A new Se compound was identified in 2010 in the blood and tissues of bluefin tuna. It was called selenoneine (SeN) since it is an isologue of naturally occurring antioxidant ergothioneine (ET), where Se replaces sulfur. In the following years, SeN was identified in a number of edible fish species and attracted attention as a new dietary Se source and potentially strong antioxidant. Studies in populations whose diet largely relies on fish revealed that SeN represents the main non-protein bound Se pool in their blood. First studies, conducted with enriched fish extracts, already demonstrated the high antioxidative potential of SeN and its possible function in the detoxification of methylmercury in fish. Cell culture studies demonstrated, that SeN can utilize the same transporter as ergothioneine, and SeN metabolite was found in human urine. Until recently, studies on SeN properties were severely limited due to the lack of ways to obtain the pure compound. As a predisposition to this work was firstly a successful approach to SeN synthesis in the University of Graz, utilizing genetically modified yeasts. In the current study, by use of HepG2 liver carcinoma cells, it was demonstrated, that SeN does not cause toxic effectsup to 100 μM concentration in hepatocytes. Uptake experiments showed that SeN is not bioavailable to the used liver cells. In the next part a blood-brain barrier (BBB) model, based on capillary endothelial cells from the porcine brain, was used to describe the possible transfer of SeN into the central nervous system (CNS). The assessment of toxicity markers in these endothelial cells and monitoring of barrier conditions during transfer experiments demonstrated the absence of toxic effects from SeN on the BBB endothelium up to 100 μM concentration. Transfer data for SeN showed slow but substantial transfer. A statistically significant increase was observed after 48 hours following SeN incubation from the blood-facing side of the barrier. However, an increase in Se content was clearly visible already after 6 hours of incubation with 1 μM of SeN. While the transfer rate of SeN after application of 0.1 μM dose was very close to that for 1 μM, incubation with 10 μM of SeN resulted in a significantly decreased transfer rate. Double-sided application of SeN caused no side-specific transfer of SeN, thus suggesting a passive diffusion mechanism of SeN across the BBB. This data is in accordance with animal studies, where ET accumulation was observed in the rat brain, even though rat BBB does not have the primary ET transporter – OCTN1. Investigation of capillary endothelial cell monolayers after incubation with SeN and reference selenium compounds showed no significant increase of intracellular selenium concentration. Speciesspecific Se measurements in medium samples from apical and basolateral compartments, as good as in cell lysates, showed no SeN metabolization. Therefore, it can be concluded that SeN may reach the brain without significant transformation. As the third part of this work, the assessment of SeN antioxidant properties was performed in Caco-2 human colorectal adenocarcinoma cells. Previous studies demonstrated that the intestinal epithelium is able to actively transport SeN from the intestinal lumen to the blood side and accumulate SeN. Further investigation within current work showed a much higher antioxidant potential of SeN compared to ET. The radical scavenging activity after incubation with SeN was close to the one observed for selenite and selenomethionine. However, the SeN effect on the viability of intestinal cells under oxidative conditions was close to the one caused by ET. To answer the question if SeN is able to be used as a dietary Se source and induce the activity of selenoproteins, the activity of glutathione peroxidase (GPx) and the secretion of selenoprotein P (SelenoP) were measured in Caco-2 cells, additionally. As expected, reference selenium compounds selenite and selenomethionine caused efficient induction of GPx activity. In contrast to those SeN had no effect on GPx activity. To examine the possibility of SeN being embedded into the selenoproteome, SelenoP was measured in a culture medium. Even though Caco-2 cells effectively take up SeN in quantities much higher than selenite or selenomethionine, no secretion of SelenoP was observed after SeN incubation. Summarizing, we can conclude that SeN can hardly serve as a Se source for selenoprotein synthesis. However, SeN exhibit strong antioxidative properties, which appear when sulfur in ET is exchanged by Se. Therefore, SeN is of particular interest for research not as part of Se metabolism, but important endemic dietary antioxidant. N2 - Selen (Se) ist ein essentielles Spurenelement, das in geringen Konzentrationen ubiquitär in der Umwelt vorkommt. Essentielle Funktionen von Se im menschlichen Körper manifestieren sich in einer Vielzahl von Proteinen, die Selenocystein als aktives Zentrum enthalten. Solche Proteine werden Selenoproteine genannt, die in zahlreichen physiologischen Prozessen wie der antioxidativen Abwehr und der Regulierung der Schilddrüsenhormonfunktionen vorkommen. Daher ist bekannt, dass ein Se-Mangel ein breites Spektrum physiologischer Beeinträchtigungen verursacht, insbesondere in solchen Regionen mit niedrigem Se-Bodengahlten. Dennoch kann Se als essentielles Spurenelement auch toxische Wirkungen entfalten, wenn seine Aufnahme das tolerierbare Maß überschreitet. Dementsprechend stellt dieser Bereich zwischen Mangel und Überbelichtung eine optimale Se-Versorgung dar. Dieser Bereich erwies sich jedoch als enger als bei jedem anderen essentiellen Spurenelement. Zusammen mit stark schwankenden SeKonzentrationen im Boden und dem Vorliegen spezifischer Bioakkumulationsfaktoren stellt dies eine deutliche Schwierigkeit bei der Beurteilung des epidemiologischen Selenstatus dar. Während im Körper mehrere Selenoproteine vorliegen, erfolgt seine Aufnahme hauptsächlich in Form kleiner organischer oder anorganischer Moleküle. Somit hängt die Se-Exposition nicht nur von der täglichen Aufnahme ab, sondern auch von der jeweiligen chemischen Form, in der es vorliegt. Die essentiellen Funktionen von Selen sind seit langem bekannt und seine Primärformen in verschiedenen Nahrungsquellen dominierenden Formen wurden bereits gut beschrieben. Dennoch wurden erst in den letzten Jahrzehnten neue analytische Möglichkeiten für eine umfassendere Untersuchung von Se-Spezies und ihren Derivaten entwickelt. Beispielsweise wurde 2010 eine neue Se-Verbindung im Blut und im Gewebe von Rotem Thunfisch identifiziert. Es wurde Selenonein (SeN) genannt, da es ein Isolog des natürlich vorkommenden Antioxidans Ergothionein (ET) ist, bei dem Se durch Schwefel ersetzt ist. In den folgenden Jahren wurde SeN in einer Reihe von essbaren Fischarten identifiziert und erregte einerseits als neue Nahrungsquelle für Se und andererseits als potenziell starkes Antioxidans Aufmerksamkeit. Studien an Probanden, deren Ernährung hauptsächlich von Fisch geprägt ist, haben gezeigt, dass SeN den hauptsächlichen nicht-proteingebundenen Se-Pool in ihrem Blut darstellt. Erste Studien mit angereicherten Fischextrakten zeigten bereits das hohe antioxidative Potenzial von SeN und seine mögliche Funktion bei der Entgiftung von Methylquecksilber im Fisch. Zellkulturstudien zeigten, dass SeN den gleichen Transporter wie Ergothionein nutzen kann und ein weiterer SeN-Metabolit wurde im menschlichen Urin gefunden. Bis vor kurzem waren Studien zu den Eigenschaften von SeN aufgrund fehlender Möglichkeiten, die reine Verbindung zu erwerben, stark eingeschränkt. Als wichtige Grundlage für die vorliegende Arbeit diente zunächst die erfolgreiche Synthese des SeN, welche an der Universität Graz unter Verwendung gentechnisch veränderter Hefen erfolgte. In der aktuellen Studie wurde unter Verwendung von HepG2-Leberkarzinomzellen gezeigt, dass SeN in physiologisch relevanten Konzentrationen keine toxischen Effekte in diesen Hepatozyten induziert. Bioverfügbarkeitsexperimente zeigten, dass SeN für die verwendeten Leberzellen nicht bioverfügbar ist. Im nächsten Teil wurde ein Modell der Blut-Hirn-Schranke (BHS) verwendet, das auf kapillaren Endothelzellen aus dem Schweinehirn basiert, um den möglichen Transfer von SeN in das zentrale Nervensystem (ZNS) zu untersuchen. Die Bewertung von Toxizitätsmarkern in diesen Endothelzellen und die online Überwachung der Barriere-Bedingungen während der Transferexperimente zeigten, dass bei physiologisch relevanten Konzentrationen keine toxischen Wirkungen von SeN auf das BHS-Endothel auftreten. Daten bezüglich des Übergangs der Selenspezies SeN zeigten zwar eine langsame, jedoch eine nicht zu vernachlässigenden Menge, die die Barriere passieren kann. Die gleichzeitige Inkubation von SeN auf beiden Barriere-Seiten verursachte keinen seitenspezifischen Transfer von SeN, was auf einen passiven Diffusionsmechanismus von SeN über die BHS hindeutet. Diese Daten stimmen mit Tierstudien überein, in denen eine ET-Akkumulation im Rattengehirn beobachtet wurde, obwohl die BHS der Ratte nicht über den primären ET-Transporter – OCTN1 – verfügt. Die Untersuchung von Monolayern aus kapillaren Endothelzellen nach Inkubation mit SeN und Referenzselenverbindungen zeigte keinen signifikanten Anstieg der intrazellulären Selenkonzentration. Speziesspezifische Se-Messungen in Mediumproben aus den apikalen und basolateralen Kompartimenten, sowie in den Zelllysaten zeigten keine SeN-Metabolisierung. Daraus kann geschlossen werden, dass SeN das Gehirn ohne signifikante Transformation erreichen kann. Als dritter Teil dieser Arbeit wurde die Bewertung der antioxidativen Eigenschaften von SeN in menschlichen Caco-2, also kolorektale Adenokarzinomzellen, durchgeführt. Frühere Studien zeigten, dass das Darmepithel in der Lage ist, SeN aktiv vom Darmlumen zur Blutseite zu transportieren und dort SeN anzureichern. Weitere Untersuchungen im Rahmen der aktuellen Arbeiten zeigten ein viel höheres antioxidatives Potenzial von SeN im Vergleich zu ET. Die Aktivität als Radikalfänger nach Inkubation mit SeN war ähnlich wie bei Selenit und Selenomethionin. Wobei die Wirkung von SeN auf die Lebensfähigkeit von Darmzellen unter oxidativen Bedingungen jedoch ähnlich der durch ET verursachten war. Um die Frage zu beantworten, ob SeN als diätetische Se-Quelle verwendet werden kann um die Aktivität von Selenoproteinen zu induzieren, wurden zusätzlich die Aktivität der Glutathionperoxidase (GPx) und die Sekretion von Selenoprotein P (SelenoP) in Caco-2-Zellen gemessen. Wie erwartet, bewirkten die Referenz-Selenverbindungen Selenit und Selenomethionin eine effiziente Induktion der GPx-Aktivität, im Gegensatz zu diesen hatte SeN keinen Einfluss auf die GPx-Aktivität. Um die Möglichkeit einer Einbettung von SeN in das Selenoproteom zu untersuchen, wurde SelenoP im Kulturmedium gemessen. Obwohl Caco-2-Zellen SeN effektiv in viel höherenMengen als Selenit oder Selenomethionin aufnehmen, wurde nach der SeN-Inkubation keine Sekretion von SelenoP beobachtet. Zusammenfassend können wir schlussfolgern, dass SeN kaum als Se-Quelle für die Selenoproteinsynthese dienen kann. SeN weist jedoch starke antioxidative Eigenschaften auf, die auftreten, wenn Schwefel in ET durch Se ausgetauscht wird. Daher ist SeN von besonderem Interesse für die Forschung, nicht als Teil des Se-Stoffwechsels, sondern als wichtiges endemisches diätetisches Antioxidans. KW - selenium KW - selenoneine KW - HepG2 KW - Caco-2 KW - PBCEC KW - Caco-2 KW - HepG2 KW - PBCEC KW - Selen KW - Selenonein Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-573794 ER - TY - JOUR A1 - Felsing, Ulrike T1 - Elternpartizipation: Hand in Hand – wie die Kommunikation zwischen Therapeut:innen und Eltern gelingt JF - Spektrum Patholinguistik 16 N2 - Für eine gelingende Kommunikation und Zusammenarbeit zwischen Therapeut:innen und Eltern sind meines Erachtens zwei Aspekte wesentlich: die therapeutische Haltung/innere Einstellung zur Beziehungsgestaltung auf Seiten der Therapeut:innen sowie ihr Wissen und die Fähigkeiten, Eltern ganz pragmatisch in den therapeutischen Prozess einzubinden. KW - Elternpartizipation KW - Beziehungsgestaltung KW - Kommunikation KW - Sprachtherapie KW - Kindertherapie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613395 SN - 978-3-86956-559-0 SN - 1866-9433 SN - 1869-3822 IS - 16 SP - 1 EP - 14 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Pätzel, Jonas T1 - Seismic site characterization using broadband and DAS ambient vibration measurements on Mt Etna, Italy N2 - Both horizontal-to-vertical (H/V) spectral ratios and the spatial autocorrelation method (SPAC) have proven to be valuable tools to gain insight into local site effects by ambient noise measurements. Here, the two methods are employed to assess the subsurface velocity structure at the Piano delle Concazze area on Mt Etna. Volcanic tremor records from an array of 26 broadband seismometers is processed and a strong variability of H/V ratios during periods of increased volcanic activity is found. From the spatial distribution of H/V peak frequencies, a geologic structure in the north-east of Piano delle Concazze is imaged which is interpreted as the Ellittico caldera rim. The method is extended to include both velocity data from the broadband stations and distributed acoustic sensing data from a co-located 1.5 km long fibre optic cable. High maximum amplitude values of the resulting ratios along the trajectory of the cable coincide with known faults. The outcome also indicates previously unmapped parts of a fault. The geologic interpretation is in good agreement with inversion results from magnetic survey data. Using the neighborhood algorithm, spatial autocorrelation curves obtained from the modified SPAC are inverted alone and jointly with the H/V peak frequencies for 1D shear wave velocity profiles. The obtained models are largely consistent with published models and were able to validate the results from the fibre optic cable. N2 - Sowohl die räumliche Autokorrelations-Methode (SPAC) als auch die Methode der horizontal-vertikal Spektralverhältnisse (H/V) sind wichtige Instrumente bei der seismischen Charakterisierung des Untergrundes mittels Bodenunruhe. In der vorliegenden Arbeit werden beide Techniken angewandt, um die Geschwindigkeitsstruktur der Piano delle Concazze Ebene auf dem Ätna zu untersuchen. Die Aufzeichnungen vulkanischen Tremors auf einem Array aus 26 Breitband-Seismometern werden prozessiert und starke Schwankungen des H/V Verhältnisses, insbesondere während Zeiten erhöhter vulkanischer Aktivität werden festgestellt. Die räumliche Verteilung der H/V Frequenzpeaks bildet eine geologische Struktur im nordöstlichen Bereichs des Untersuchungsgebietes ab. Diese wird als der alte Rand der Ellittico Caldera interpretiert. Die H/V-Methode wird um die kombinierte Verarbeitung von Geschwindigkeitsaufzeichnungen des Breitband-Arrays und faseroptischen Dehnungmessungen (distributed acoustic sensing, DAS) erweitert. Hierfür werden die Daten eines 1,5 km langen Glasfaserkabels, mit welchem das Seismometer-Array zusammen installiert wurde, genutzt. Erhöhte Werte der maximalen Amplitude der berechneten Spektralverhältnisse, stimmen mit der Lage bekannter Verwerfungen im Gebiet überein. Das Ergebnis deutet auf einen bisher nicht aufgezeichneten Verlauf einer der Verwerfungszonen hin. Die Interpretaion der Strukturen stimmt überein mit den Ergebnissen einer Geomagnetik-Studie der Piano delle Concazze. Mithilfe des Neighborhood-Algorithmus werden die räumlichen Autokorrelationskurven der modifizierten SPAC, sowohl einfach als auch in Kombination mit den H/V Frequenzpeaks, invertiert. So werden schließlich 1D Modelle der S-Wellengeschwindigkeit abgeleitet. Diese stimmen weitgehend überein mit den Resultaten anderer Studien und bestätigen darüberhinaus die Ergebnisse der DAS-Aufzeichnungen. KW - site characterization KW - Etna KW - DAS KW - ambient vibration KW - seismic noise KW - H/V KW - HVSR KW - velocity model KW - SPAC KW - MSPAC KW - spatial autocorrelation KW - Piano delle Concazze KW - site effects KW - microzonation KW - volcanic tremor KW - joint inversion KW - ortsverteile faseroptische Dehnungsmessung KW - Ätna KW - H/V KW - horizontal-vertikales Spektralverhältnis KW - räumliche Autkorrelationsmethode KW - modifizierte räumliche Autkorrelationsmethode KW - Bodenunruhe KW - gemeinsame Inversion KW - Mikrozonierung KW - seismisches Rauschen KW - Ortscharakterisierung KW - Ortseffekte KW - räumliche Autokorrelation KW - Geschwindigkeitsmodell KW - vulkanischer Tremor KW - Piano delle Concazze Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613793 ER - TY - THES A1 - Stanke, Sandra T1 - AC electrokinetic immobilization of influenza viruses and antibodies on nanoelectrode arrays for on-chip immunoassays T1 - AC elektrokinetische Immobilisierung von Influenzaviren und Antikörpern auf Nanoelektrodenarrays für on-Chip Immunoassays N2 - In the present thesis, AC electrokinetic forces, like dielectrophoresis and AC electroosmosis, were demonstrated as a simple and fast method to functionalize the surface of nanoelectrodes with submicrometer sized biological objects. These nanoelectrodes have a cylindrical shape with a diameter of 500 nm arranged in an array of 6256 electrodes. Due to its medical relevance influenza virus as well as anti-influenza antibodies were chosen as a model organism. Common methods to bring antibodies or proteins to biosensor surfaces are complex and time-consuming. In the present work, it was demonstrated that by applying AC electric fields influenza viruses and antibodies can be immobilized onto the nanoelectrodes within seconds without any prior chemical modification of neither the surface nor the immobilized biological object. The distribution of these immobilized objects is not uniform over the entire array, it exhibits a decreasing gradient from the outer row to the inner ones. Different causes for this gradient have been discussed, such as the vortex-shaped fluid motion above the nanoelectrodes generated by, among others, electrothermal fluid flow. It was demonstrated that parts of the accumulated material are permanently immobilized to the electrodes. This is a unique characteristic of the presented system since in the literature the AC electrokinetic immobilization is almost entirely presented as a method just for temporary immobilization. The spatial distribution of the immobilized viral material or the anti-influenza antibodies at the electrodes was observed by either the combination of fluorescence microscopy and deconvolution or by super-resolution microscopy (STED). On-chip immunoassays were performed to examine the suitability of the functionalized electrodes as a potential affinity-based biosensor. Two approaches were pursued: A) the influenza virus as the bio-receptor or B) the influenza virus as the analyte. Different sources of error were eliminated by ELISA and passivation experiments. Hence, the activity of the immobilized object was inspected by incubation with the analyte. This resulted in the successful detection of anti-influenza antibodies by the immobilized viral material. On the other hand, a detection of influenza virus particles by the immobilized anti-influenza antibodies was not possible. The latter might be due to lost activity or wrong orientation of the antibodies. Thus, further examinations on the activity of by AC electric fields immobilized antibodies should follow. When combined with microfluidics and an electrical read-out system, the functionalized chips possess the potential to serve as a rapid, portable, and cost-effective point-of-care (POC) device. This device can be utilized as a basis for diverse applications in diagnosing and treating influenza, as well as various other pathogens. N2 - In der vorliegenden Arbeit wurden AC elektrokinetische Kräfte, wie die Dielektrophorese und die AC Elektroosmose, als einfache und schnelle Methode zur Funktionalisierung der Oberfläche von Nanoelektroden mit biologischen Objekten in Submikrometergröße demonstriert. Diese Nanoelektroden haben eine zylindrische Form mit einem Durchmesser von 500 nm und sind in einem Array aus 6256 Elektroden angeordnet. Aufgrund ihrer medizinischen Relevanz wurden Influenzaviren sowie anti-Influenza Antikörper als Modellorganismus ausgewählt. Gängige Methoden, um Antikörper oder Proteine auf Biosensoroberflächen zu bringen, sind komplex und zeitaufwändig. In der vorliegenden Arbeit wurde gezeigt, dass durch die Anwendung elektrischer Wechselfelder Influenzaviren und Antikörper innerhalb von Sekunden auf den Nanoelektroden immobilisiert werden können, ohne dass zuvor eine chemische Modifikation der Oberfläche noch des immobilisierten biologischen Objekts erforderlich ist. Die Verteilung dieser immobilisierten Objekte ist über das gesamte Array ungleichmäßig. Es kommt zur Ausbildung eines Gradienten, welcher von der äußeren zur den inneren Reihen hin abnimmt. Verschiedene Ursachen für diesen Gradienten wurden diskutiert, beispielsweise der Vortex-förmige Flüssigkeitsstrom über den Nanoelektroden, der unter anderem durch elektrothermische Flüssigkeitsbewegung erzeugt wird. Es wurde gezeigt, dass Teile des akkumulierten Materials dauerhaft an den Elektroden immobilisiert sind. Dies ist ein Alleinstellungsmerkmal des vorgestellten Systems, da in der Literatur die AC elektrokinetische Immobilisierung fast ausschließlich als Methode nur zur temporären Immobilisierung dargestellt wird. Die räumliche Verteilung des immobilisierten Virusmaterials bzw. der anti-Influenza Antikörper an den Elektroden wurde entweder durch die Kombination aus Fluoreszenzmikroskopie und Dekonvolution oder durch super-resolution Mikroskopie (STED) betrachtet. Es wurden On-Chip-Immunoassays durchgeführt, um die Eignung der funktionalisierten Elektroden für einen potenziellen affinitätsbasierten Biosensor zu untersuchen. Dabei wurden zwei Ansätze verfolgt: A) Influenzaviren als Biorezeptor oder B) Influenzavirus als Analyt. Verschiedene Fehlerquellen wurden mittels ELISA und Passivierungsexperimente eliminiert. Infolgedessen wurde die Aktivität der immobilisierten Objekte durch Inkubation mit dem Analyten überprüft. Dies führte zum erfolgreichen Nachweis von anti-Influenza Antikörpern mittels immobilisiertem Virusmaterial. Andererseits war ein Nachweis von Influenzaviruspartikeln durch die immobilisierten anti-Influenza Antikörper nicht möglich. Letzteres könnte auf einen Aktivitätsverlust oder eine falsche Ausrichtung der Antikörper zurückzuführen sein. Daher sollten weitere Untersuchungen zur Aktivität von durch elektrische Wechselfelder immobilisierte Antikörper folgen. In Kombination mit Mikrofluidik und einem elektrischen Auslesesystem besitzen die funktionalisierten Chips das Potenzial, als schnelle, tragbare und kostengünstige Point-of-Care-Einheit (POC) zu dienen. Dieses Einheit kann als Grundlage für vielfältige Anwendungen bei der Diagnose und Behandlung von Influenza und verschiedenen anderen Krankheitserregern genutzt werden. KW - AC electrokinetics KW - AC Elektrokinetik KW - AC electroosmosis KW - AC Elektroosmosis KW - dielectrophoresis KW - Dielektrophorese KW - virus KW - Virus KW - influenza KW - Influenza KW - antibody KW - Antikörper KW - nanoelectrodes KW - Nanoelektroden KW - lab-on-chip KW - lab-on-chip KW - LOC KW - LOC KW - point-of-care KW - point-of-care KW - POC KW - POC KW - immunoassay KW - Immunoassay Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617165 ER - TY - JOUR A1 - Singer-Brehm, Elisabeth T1 - ‚Maise Jeschurun‘ BT - Die Geschichte einer Ritualmordanklage JF - Genisa-Blätter IV Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-584932 SN - 978-3-86956-539-2 SP - 129 EP - 157 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Uličná, Lenka T1 - Zur Unheil abwendenden Funktion der Genisa JF - Genisa-Blätter IV Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-584868 SN - 978-3-86956-539-2 SP - 27 EP - 39 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Cohen-Hattab, Kobi T1 - Pioneers of Independent Jewish Shipping BT - The Emergence of Private Jewish Shipping Companies in Palestine, 1934 – 1939 JF - PaRDeS : Journal of the Association for Jewish Studies in Germany JF - PaRDeS : Zeitschrift der Vereinigung für Jüdische Studien e.V. N2 - The birth of the Yishuv’s national shipping company, ZIM was preceded by private enterprise; the sea had not traditionally been a focus of the Zionist movement. In the 1930s, a five-year span of private commercial shipping saw three companies in the Jewish community in Palestine – Palestine Shipping Company, Palestine Maritime Lloyd, and Atid – before shipping was cut short by the outbreak of the Second World War. Despite their brief lifespans and their negligible contribution to general shipping, these companies constituted an important milestone. Their existence helped shift the Yishuv leadership’s attitudes about shipping’s importance for the community and the need for it to be supported by national institutions. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585542 SN - 978-3-86956-552-1 SN - 1614-6492 SN - 1862-7684 IS - 28 SP - 34 EP - 50 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Weinmann, Franziska T1 - Mothers of Seafaring BT - Henrietta Diamond and the Question of Female Representation in the Jewish Maritime Realm JF - PaRDeS : Journal of the Association for Jewish Studies in Germany JF - PaRDeS : Zeitschrift der Vereinigung für Jüdische Studien e.V. N2 - The article aims to trace the contribution of Jewish women in the Yishuv’s maritime history. Taking the example of Henrietta Diamond, a founding member and chairperson of the Zebulun Seafaring Society, the article seeks to explore the representation and role of women in a growing Jewish maritime domain from the 1930s to the 1950s. It examines Zionist narratives on the ‘New Jew’ and the Jewish body and studies their relevance for the emerging field of maritime activities in the Yishuv. By contextualizing the work and depiction of Henrietta Diamond, the article sheds new light on the gendered notions that underlay the emergence of the Jewish maritime domain and illustrates the patterns of inclusion and exclusion in it. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585563 SN - 978-3-86956-552-1 SN - 1614-6492 SN - 1862-7684 IS - 28 SP - 52 EP - 67 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Eggers, Nele T1 - Properties of Arctic aerosol in the transition between Arctic haze to summer season derived by lidar N2 - During the Arctic haze period, the Arctic troposphere consists of larger, yet fewer, aerosol particles than during the summer (Tunved et al., 2013; Quinn et al., 2007). Interannual variability (Graßl and Ritter, 2019; Rinke et al., 2004), as well as unknown origins (Stock et al., 2014) and properties of aerosol complicate modeling these annual aerosol cycles. This thesis investigates the modification of the microphysical properties of Arctic aerosols in the transition from Arctic haze to the summer season. Therefore, lidar measurements of Ny-Ålesund from April 2021 to the end of July 2021 are evaluated based on the aerosols’ optical properties. An overview of those properties will be provided. Furthermore, parallel radiosonde data is considered for indication of hygroscopic growth. The annual aerosol cycle in 2021 differs from expectations based on previous studies from Tunved et al. (2013) and Quinn et al. (2007). Developments of backscatter, extinction, aerosol depolarisation, lidar ratio and color ratio show a return of the Arctic haze in May. The haze had already reduced in April, but regrew afterwards. The average Arctic aerosol displays hygroscopic behaviour, meaning growth due to water uptake. To determine such a behaviour is generally laborious because various meteorological circumstances need to be considered. Two case studies provide further information on these possible events. In particular, a day with a rare ice cloud and with highly variable water cloud layers is observed. N2 - Während der Arctic haze Periode sind größere, jedoch auch weniger, Aerosole in der arktischen Troposphäre vorhanden als im Sommer (Tunved et al., 2013; Quinn et al., 2007). Interannuale Variabilität (Graßl and Ritter, 2019; Rinke et al., 2004), sowie unbekannte Herkunft (Stock et al., 2014) und Eigenschaften der Aerosole erschweren die Modellierung der Aerosol-Jahresgänge. Diese Arbeit untersucht, wie sich die mikrophysikalischen Eigenschaften der Aerosole beim Übergang vom Arctic haze zur Sommerzeit ändern. Dafür werden Lidar Messungen aus Ny-Ålesund von April 2021 bis Ende Juli 2021 hinsichtlich der optischen Eigenschaften der Aerosole untersucht. Ein Überblick über diese Eigenschaften wird gegeben. Zusätzlich werden parallele Radiosondendaten mit einbezogen, um Hinweise auf hygroskopisches Wachstum zu erhalten. Der Jahresgang der Aerosole in 2021 unterscheidet sich von Erwartungen, gebildet aus früheren Studien von Tunved et al. (2013) und Quinn et al. (2007). Die zeitliche Entwicklung des Rückstreuungskoeffizienten, Extinktionskoeffizienten, der Aerosol Depolarisation, des Lidarverhältnisses und des Farbverhältnisses zeigen, dass der Arctic haze im Mai zurückkehrt. Im April hatte der haze bereits abgenommen, stieg in Mai jedoch wieder an. In der Arktis zeigt ein Aerosol typischerweise hygroskopisches Verhalten - mit anderen Worten, es wächst durch Aufnahme von Wasser. Ein solches alleine aus Fernerkundungsdaten zu bestimmen ist jedoch in der Regel aufwendig, weil unterschiedliche meteorologische Bedingungen zu berücksichtigen sind. Zwei Fallstudien geben mehr Informationen über die möglichen hygroskopischen Verhaltensweisen der Aerosole. Insbesondere wird auch ein Tag mit einer Eiswolke und stark fluktuierenden Wasserwolken beobachtet. KW - remote sensing KW - Lidar KW - Arctic aerosol KW - aerosol: optical properties KW - aerosol: hygroscopic growth KW - Arctic haze KW - arktischer Dunst KW - aerosol: hygroskopisches Wachstum KW - aerosol: optische Eigenschaften KW - arktisches Aerosol KW - Fernerkundung KW - Lidar Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-619438 ER - TY - THES A1 - Pons, Michaël T1 - The Nature of the tectonic shortening in Central Andes T1 - Die Beschaffenheit der tektonischen Verkürzung in den Zentralanden N2 - The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT. The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen. The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that “bulldozes” the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as “flat-slab conveyor”. Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively. N2 - Die Andenkordillere ist ein Gebirgszug am westlichen Rand Südamerikas und Teil des östlichen zirkumpazifischen Gebirgsgürtels. Der ~7000 km lange Gebirgszug ist einer der längsten der Erde und beherbergt mit dem Altiplano-Puna-Plateau das zweitgrößte orogenetische Plateau der Welt. Die Anden sind als nicht-kollisionsbedingtes Subduktionsgebirge bekannt, das durch die Wechselwirkung zwischen der subduzierten ozeanischen Nazca-Platte und der südamerikanischen Kontinentalplatte entstanden ist. Entlang des Höhenzugs der Anden lassen sich Segmente unterschiedlicher morphotektonischer Provinzen ausmachen, die durch Variationen in topographischer Höhe, vulkanischer Aktivität, Deformationsform, Krustendicke, Krustenverkürzung und ozeanischer Plattengeometrie gekennzeichnet sind. Der größte Teil der heutigen Hebung lässt sich durch die Krustenverkürzung der letzten 50 Mio. Jahre erklären, wobei das Ausmaß der Verkürzung von ca. 300 km im zentralen Segment (15°S-30°S) auf weniger als die Hälfte im südlichen Teil (30°S-40°S) abnimmt. Es wurden mehrere Faktoren vorgeschlagen, die das Ausmaß und die Beschleunigung der Verkürzung der zentralen Anden in den letzten 15 Mio. Jahren beeinflusst haben könnten. Ein wichtiger Faktor ist wahrscheinlich die Plattengeometrie. Durch die Subduktion des Juan-Fernandez-Rückens und dessen hohe Auftriebskraft fällt die Platte bei 27-33°S in ~100 km Tiefe horizontal ein und bildet den pampeanischen flat-slab. Es wird angenommen, dass die horizontale Subduktion den thermomechanischen Zustand des Sierras-Pampeanas-Vorlandes beeinflusst, indem sie beispielsweise die Lithosphäre stärkt und die dickschalige Verlagerung der Deformation nach Osten sowie die Hebung der kristallinen Basis der Sierras-Pampeanas fördert. Vor etwa 30 Mio. Jahren verschob sich der flat-slab von der geographischen Breite des Altiplano zu seiner heutigen Position nach Süden. Die mit der Positionsverlagerung verbundenen Prozesse und Folgen für die gleichzeitige Beschleunigung der Verkürzungsraten in den zentralen Anden sind noch immer unklar. Obwohl die Passage des flat-slab eine Erklärung für dafür sein könnte, erklärt ihr Zeitpunkt nicht die beiden aus der Geologie abgeleiteten Verkürzungsimpulse vor etwa 15 und 4 Mio. Jahren. Ich stelle die Hypothese auf, dass die Deformation in den zentralen Anden durch eine komplexe Wechselwirkung zwischen der Subduktionsdynamik der Nazca-Platte und der dynamischen Materialschwächung der südamerikanischen Platte aufgrund einer Reihe von Prozessen in der oberen Platte gesteuert wird. Um diese Hypothese zu prüfen, ist eine detaillierte Untersuchung der Rolle des flat-slab, sowie der strukturellen Vererbung der Kontinentalplatte und der Subduktionsdynamik in den Anden erforderlich. Daher habe ich zwei Klassen von numerischen thermomechanischen Modellen erstellt: (i) Die erste Klasse von Modellen umfasst eine Reihe von generischen E-W-orientierten 2D-Subduktionsmodellen mit hoher Auflösung. Diese beinhalten subhorizontalen Subduktion um die Rolle der Subduktionsdynamik auf die zeitliche Variabilität der Verkürzungsrate in den zentralen Anden auf dem Altiplano (~21°S) zu untersuchen. Die modellierte Verkürzungsrate wurde mit der beobachteten tektonischen Verkürzungsrate in den zentralen Anden validiert. (ii) Die zweite Klasse von Modellen besteht aus einer Reihe von datengesteuerten 3D-Modellen der heutigen pampeanischen flat-slab-Konfiguration und der Sierras Pampeanas (26-42°S). Diese Modelle zielen darauf ab, den relativen Beitrag der heutigen subhorizontalen Subduktion und der ererbten Strukturen in der kontinentalen Lithosphäre zur Dehnungslokalisierung zu untersuchen. Beide Modellklassen wurden mit Hilfe des fortschrittlichen geodynamischen Finite-Elemente-Codes ASPECT erstellt. Das erste Hauptergebnis dieser Arbeit ist die Vermutung, dass zeitliche Änderungen der Verkürzung in den Zentralanden in erster Linie durch die Subduktionsdynamik der Nazca-Platte gesteuert werden, während diese in die Mantelübergangszone eindringt. Die Dynamik hängt von der westwärts gerichteten Geschwindigkeit der südamerikanischen Platte ab, die die Hauptantriebskraft für die Krustenverkürzung in den Anden darstellt und den Subduktionsgraben zum Zurückziehen zwingt. Wenn die subduzierende Platte den unteren Erdmantel erreicht, wölbt sie sich auf, bis der erzwungene Rückzug des Grabens dazu führt, dass auch die Platte im oberen Erdmantel steiler wird. Die aufgesteilte Platte behindert wiederum den Graben, der sich der vorrückenden südamerikanischen Platte widersetzt, was eine pulsierende Verkürzung zur Folge hat. Dieses Subduktionsregime, bestehend aus Aufwölbung und Aufsteilung, könnte durch die allgemeine westwärts gerichtete Geschwindigkeitsabnahme der südamerikanischen Platte ausgelöst worden sein. Der Durchgang des flat-slab ist zudem eine notwendige Bedingung, um die Verkürzung der Kontinentalplatte voran zu treiben, da subhorizontale Subduktion Teile der Mantellithosphäre abträgt und so die Kontinentalplatte schwächt. Dieser Prozess trägt somit zur effizienten Verkürzung bei während der Graben behindert wird und ist gefolgt von der Ablösung der Mantellithosphäre vor etwa 20 Mio. Jahren. Das Subduzieren des brasilianischen kratonischen Schildes unter das Orogen erfolgte schließlich vor etwa 11 Mio. Jahren aufgrund der mechanischen Schwächung der dicken Sedimentschicht, die den Schildrand bedeckte, sowie wegen des abnehmenden Widerstands der geschwächten Gebirgslithosphäre. Das zweite Hauptergebnis dieser Arbeit ist die Vermutung, dass der kalte flat-slab die darüber liegende kontinentale Lithosphäre stärkt und damit verhindert, dass sich Verformungen lokalisieren können. Daher wird die Deformation durch die an der Subduktionsfläche wirkende Scherspannung auf die östliche Front des flat-slab-Segments übertragen. Der flat-slab wirkt wie ein Eindringling, der die unter mantle-keel bekannte Anhäufung von abgelöstem Mantelmaterial beiseite schiebt. Der Versatz in der ostwärts gerichteten Deformationsausbreitung der flachen und der steileren Plattensegmenten im Süden führt zur Bildung einer transpressiven dextralen Scherungszone. Hier werden ererbte Verwerfungen vergangener tektonischer Ereignisse reaktiviert und helfen bei der Lokalisierung neuer Deformation in einer en-echelon-artigen Scherungszone. Dies geschieht durch einen Mechanismus, den ich als "flat-slab-Conveyor" bezeichne. Das laterale Zusammenschieben wird besonders durch das Flacherwerden des flat-slab beeinflusst, welches den Zeitpunkt mehrerer geologischer Ereignisse erklärt, die der Ankunft des flat-slab bei 33°S vorangehen. Dazu gehören der Beginn der Kompression und der Übergang von dünn- zu dickschaliger Deformation, die sich aus der Krustenkontraktion in den Sierras Pampeanas etwa 10 bzw. 6 Mio. Jahre vor der Kollision mit dem Juan-Fernandez-Rücken auf diesem Breitengrad ergaben. KW - Andes KW - Orogen KW - tectonics KW - Subduction KW - Deformation KW - Shortening KW - Flat subduction KW - Geodynamics KW - Altiplano KW - Puna KW - Sierras Pampeanas KW - Foreland KW - Altiplano KW - Anden KW - Deformation KW - Flache Subduktion KW - Vorland KW - Geodynamik KW - Orogen KW - Puna KW - Verkürzung KW - Sierras Pampeanas KW - Subduktion KW - Tektonik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-600892 ER - TY - THES A1 - Gruner, David T1 - New frontiers in gyrochronology T1 - Neue Horizonte in Gyrochronologie BT - exploring the evolution of stellar rotation in open clusters and wide binaries BT - eine Untersuchung der Entwicklung von Sternrotation in offenen Sternhaufen und weiten Doppelsternsystemen N2 - Late-type stars are by far the most frequent stars in the universe and of fundamental interest to various fields of astronomy – most notably to Galactic archaeology and exoplanet research. However, such stars barely change during their main sequence lifetime; their temperature, luminosity, or chemical composition evolve only very slowly over the course of billions of years. As such, it is difficult to obtain the age of such a star, especially when it is isolated and no other indications (like cluster association) can be used. Gyrochronology offers a way to overcome this problem. Stars, just like all other objects in the universe, rotate and the rate at which stars rotate impacts many aspects of their appearance and evolution. Gyrochronology leverages the observed rotation rate of a late-type main sequence star and its systematic evolution to estimate their ages. Unlike the above-mentioned parameters, the rotation rate of a main sequence star changes drastically throughout its main sequence lifetime; stars spin down. The youngest stars rotate every few hours, whereas much older stars rotate only about once a month, or – in the case of some late M-stars – once in a hundred days. Given that this spindown is systematic (with an additional mass dependence), it gave rise to the idea of using the observed rotation rate of a star (and its mass or a suitable proxy thereof) to estimate a star’s age. This has been explored widely in young stellar open clusters but remains essentially unconstrained for stars older than the sun, and K and M stars older than 1 Gyr. This thesis focuses on the continued exploration of the spindown behavior to assess, whether gyrochronology remains applicable for stars of old ages, whether it is universal for late-type main sequence stars (including field stars), and to provide calibration mileposts for spindown models. To accomplish this, I have analyzed data from Kepler space telescope for the open clusters Ruprecht 147 (2.7 Gyr old) and M 67 (4 Gyr). Time series photometry data (light curves) were obtained for both clusters during Kepler’s K2 mission. However, due to technical limitations and telescope malfunctions, extracting usable data from the K2 mission to identify (especially long) rotation periods requires extensive data preparation. For Ruprecht 147, I have compiled a list of about 300 cluster members from the literature and adopted preprocessed light curves from the Kepler archive where available. They have been cleaned of the gravest of data artifacts but still contained systematics. After correcting them for said artifacts, I was able to identify rotation periods in 31 of them. For M 67 more effort was taken. My work on Ruprecht 147 has shown the limitations imposed by the preselection of Kepler targets. Therefore, I adopted the time series full frame image directly and performed photometry on a much higher spatial resolution to be able to obtain data for as many stars as possible. This also means that I had to deal with the ubiquitous artifacts in Kepler data. For that, I devised a method that correlates the artificial flux variations with the ongoing drift of the telescope pointing in order to remove it. This process was a large success and I was able to create light curves whose quality match and even exceede those that were created by the Kepler mission – all while operating on higher spatial resolution and processing fainter stars. Ultimately, I was able to identify signs of periodic variability in the (created) light curves for 31 and 47 stars in Ruprecht 147 and M 67, respectively. My data connect well to bluer stars of cluster of the same age and extend for the first time to stars redder than early-K and older than 1 Gyr. The cluster data show a clear flattening in the distribution of Ruprecht 147 and even a downturn for M 67, resulting in a somewhat sinusoidal shape. With that, I have shown that the systematic spindown of stars continues at least until 4 Gyr and stars continue to live on a single surface in age-rotation periods-mass space which allows gyrochronology to be used at least up to that age. However, the shape of the spindown – as exemplified by the newly discovered sinusoidal shape of the cluster sequence – deviates strongly from the expectations. I then compiled an extensive sample of rotation data in open clusters – very much including my own work – and used the resulting cluster skeleton (with each cluster forming a rip in color-rotation period-mass space) to investigate if field stars follow the same spindown as cluster stars. For the field stars, I used wide binaries, which – with their shared origin and coevality – are in a sense the smallest possible open clusters. I devised an empirical method to evaluate the consistency between the rotation rates of the wide binary components and found that the vast majority of them are in fact consistent with what is observed in open clusters. This leads me to conclude that gyrochronology – calibrated on open clusters – can be applied to determine the ages of field stars. N2 - Sterne mit späten Spektraltypen sind mit Abstand die Häufigsten im Universum und von großem Interesse für verschiedene Bereiche der Astronomie. Dabei sind insbesondere galaktische Archäologie und die Erforschung von Exoplanten zu nennen. Das Problem ist jedoch, dass sich diese Sterne nur sehr langsam entwickeln; ihre Temperatur, Helligkeit und chemische Zusammensetzung ändern kaum während ihrer langen Hauptreihenphase. Daher ist es schwierig für solche Sterne ein Alter zu bestimmen – vorallem wenn sie isoliert sind und es keine anderne Indikatoren (z.B. die Zugehörigkeit zu einem Sternhaufen) gibt. Eine Möglichkeit dieses Problem zu umgehen ist Gyrochronologie. Sterne, wie alle anderen Objekte im Universum, rotieren und die Rate, mit der sie rotieren, beeinflusst viele Aspekte ihrer Evolution. Gyrochronologie nutzt die beobachtete Rotation und ihre Änderung mit der Zeit als ein Mittel zur Altersbestimmung. Anders als zuvor genannte Parameter ändert sich die Rate, mit der Sterne rotieren, deutlich im Laufe ihrer Hauptreihenentwicklung. Sie verlangsamt sich. Junge Sterne rotieren in wenigen Stunden einmal um sich selbst – ältere brauchen dafür schon einen Monat oder gar bis zu über hundert Tage. Die Tatsache, dass das Abbremsen systematischen Gesetzmäßigkeiten unterliegt, gebar die Idee dies zu nutzen um das Alter eines Sternes zu bestimmen. Das Verhalten junger Sterne wurde ausführlich erfoscht, jedoch für die meisten Sterne älter als 1 Gyr nicht bekannt, wie sich die Rotationsraten entwickeln. Diese Arbeit fokussiert sich auf die fortgesetzte Erforschung des Abbremsens; insbesondere ob Gyrochronologie auch für ältere Sterne nutzbar ist, ob es universell für alle Sterne (inklusive Feldsterne) ist und darauf weitere Kalibrationspunkte für Abbrems-Modelle bereitzustellen. Dafür habe ich, basierend auf photometrischen Zeitserien (Lichtkurven) von Keplers K2 Programm, die offenen Sternhaufen Ruprecht 147 (2.7 Gyr alt) and M 67 (4 Gyr) untersucht. Es sind jedoch umfangreiche Schritte in der Datenverarbeitung notwendig um Fehlfunktionen und technischen Limitationen des Teleskops zu begegnen. Für Ruprecht 147 habe ich aus Literaturdaten eine Liste von 300 Haufen-zugehörigen Sternen erstellt und mit fertigreduzierte Lichtkurven aus dem Kepler Archiv kombiniert. Die gröbsten Datensystematiken wurden in diesen bereinigt, denoch sind problematische Artefakte weiterhin vorhanden. Die Arbeit an Ruprecht 147 hat die Limitationen von archivierten Kepler Daten gezeigt. Daher wurde für M 67 mehr Aufwand betrieben. Direkt basierend auf den photometrischen Auffnahmen habe ich eigene Lichtkurven erzeugt, was eine deutlich höhere räumliche Auflösung erlaubt hat. Das hieß jedoch auch, dass ich mich mit all Systematiken in Kepler Daten befassen musste. Dafür habe ich eine Methodik konzipiert, die die künstlichen Variation im aufgezeichneten Fluss mit der Position eines Sterns auf dem Detektor korreliert und daraus eine Korrektur bestimmt. Dieser Prozess war so erfolgreich, dass ich Lichtkurven kreiert habe, die in ihrer Qualität an die archivierten Daten heran kommen oder sie gar übersteigen. Nach entsprechender Korrektur der Artefakte konnte ich Rotationsperioden für 31 (in Ruprecht 147) und 47 (in M 67) Sterne identifizieren. Genau wie zuvor in jüngeren Sternhaufen gesehen, folgen auch die äelteren Sternhaufen einer klaren Sequenz im Farb-Rotations-Raum. Meine Daten schließen direkt an Ergebnisse gleichaltriger Haufen an und erweitern diese zum ersten Mal zu Sternen älter als 1 Gyr und röter als frühe K-Sterne. Meine Ergebnisse zeigen eine deutliche Abweichung von der erwarteten Entwicklung, verkörpert durch eine klare Abflachung der Sequenz für Ruprecht 147, die für M 67 eine sinusförmige Struktur annimmt. Dennoch konnte ich damit zeigen, dass sich das systematische Abbremsen der Rotation von Sterne auch bis 4 Gyr fortsetzt und Sterne sich weiterhin auf eine wohldefinierten Ebene im Farb-Rotations-Alters-Raum befinden. Das heißt auch, Gyrochronologie kann mindestens für bis zu 4 Gyr alte Sterne genutzt werden. Basierend auf meinen eigenen Ergebnissen und Literaturdaten für jüngere Sternhaufen habe ich einen Vergleich mit Feldsternen durchgeführt. Die Feldsterne für diesen Vergleich entstammen weiten Doppelsternsystemen. Deren gemeinsamer Ursprung erlaubt eine Evaluierung der inneren Konsistenz beider Sterne. Mein Vergleich hat gezeigt, dass Doppelsternsysteme mit sich selbst aber auch mit den Sternhaufen konsistent sind. Ich habe damit erstmalig gezeigt, dass sich die Rotation von Feldsternen und Haufensternen gleich entwickelt. In Konsequenz bedeutet dies auch, dass Gyrochronologie angewandt werden kann, um das Alter von Feldsternen zu bestimmen. KW - Gyrochronologie KW - gyrochronology KW - spindown KW - rotation KW - Rotation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615268 ER - TY - JOUR A1 - Tan, Sarah A1 - Düring, Sarah A1 - Wilde, Alina A1 - Hamburger, Lara A1 - Fritzsche, Tom A1 - Felsing, Ulrike A1 - Lauer, Norina A1 - Corsten, Sabine A1 - Ostermann, Frank A1 - Nonn, Kerstin A1 - Nerz, Verena A1 - Neumann, Sandra A1 - Zauke, Svenja A1 - Sandrieser, Patricia A1 - Steinberg, Romy Simone A1 - Thurmann, Anika A1 - Dörr, Fiona A1 - Bilda, Kerstin A1 - Kluth, Alicia A1 - Lemire-Tremblay, Marilyne A1 - Jamey, Kevin A1 - Dalla Bella, Simone A1 - Falk, Simone A1 - Kleingünther, Constanze A1 - Gabler, Katrin A1 - Elligsen, Chiara A1 - Weiland, Katharina A1 - Wiehe, Lea A1 - Wahl, Michael A1 - Binczyk, Sarah A1 - Staebel, Cornelia A1 - Jung, Stefanie A1 - Eikerling, Maren A1 - Czok, Clara A1 - Sallat, Stephan A1 - Collasius, Valerie A1 - Grahovac, Tena ED - Tan, Sarah ED - Düring, Sarah ED - Wilde, Alina ED - Hamburger, Lara ED - Fritzsche, Tom T1 - Spektrum Patholinguistik Band 16. Schwerpunktthema: Schnittstelle Alltag: Transfer und Teilhabe in der Sprachtherapie N2 - Das 16. Herbsttreffen Patholinguistik mit dem Schwerpunktthema »Schnittstelle Alltag: Transfer und Teilhabe in der Sprachtherapie« fand am 19.11.2022 als Online-Veranstaltung statt. Das Herbsttreffen wird seit 2007 jährlich vom Verband für Patholinguistik e.V. (vpl), seit 2021 vom Deutschen Bundesverband für akademische Sprachtherapie und Logopädie (dbs) in Kooperation mit der Universität Potsdam durchgeführt. Der vorliegende Tagungsband beinhaltet die Vorträge zum Schwerpunktthema sowie die Posterpräsentationen zu weiteren Themen aus der sprachtherapeutischen Forschung und Praxis. N2 - The Sixteenth Autumn Meeting Patholinguistics with its main topic »Interface everyday life: Transfer and participation in speech/language therapy« took place online on the 19th of November 2022. This annual meeting has been organised since 2007 by the Association for Patholinguistics (vpl), since 2021 by the German Federal Association for Academic Speech/Language Therapy and Logopaedics (dbs) in cooperation with the University of Potsdam. The present proceedings feature the presentations on the main topic as well as articles from the poster session covering a broad range of areas in research and practice of speech/language therapy. T3 - Spektrum Patholinguistik - 16 KW - Patholinguistik KW - Sprachtherapie KW - Transfer KW - Teilhabe KW - patholinguistics KW - speech/language therapy KW - transfer KW - participation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590433 SN - 978-3-86956-559-0 SN - 1866-9433 SN - 1869-3822 IS - 16 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Djalali, Saveh Arman T1 - Multiresponsive complex emulsions: Concepts for the design of active and adaptive liquid colloidal systems T1 - Multiresponsive komplexe Emulsionen: Konzepte für das Design von aktiven und adaptiven flüssig-kolloidalen Systemen N2 - Complex emulsions are dispersions of kinetically stabilized multiphasic emulsion droplets comprised of two or more immiscible liquids that provide a novel material platform for the generation of active and dynamic soft materials. In recent years, the intrinsic reconfigurable morphological behavior of complex emulsions, which can be attributed to the unique force equilibrium between the interfacial tensions acting at the various interfaces, has become of fundamental and applied interest. As such, particularly biphasic Janus droplets have been investigated as structural templates for the generation of anisotropic precision objects, dynamic optical elements or as transducers and signal amplifiers in chemo- and bio-sensing applications. In the present thesis, switchable internal morphological responses of complex droplets triggered by stimuli-induced alterations of the balance of interfacial tensions have been explored as a universal building block for the design of multiresponsive, active, and adaptive liquid colloidal systems. A series of underlying principles and mechanisms that influence the equilibrium of interfacial tensions have been uncovered, which allowed the targeted design of emulsion bodies that can alter their shape, bind and roll on surfaces, or change their geometrical shape in response to chemical stimuli. Consequently, combinations of the unique triggerable behavior of Janus droplets with designer surfactants, such as a stimuli-responsive photosurfactant (AzoTAB) resulted for instance in shape-changing soft colloids that exhibited a jellyfish inspired buoyant motion behavior, holding great promise for the design of biological inspired active material architectures and transformable soft robotics. In situ observations of spherical Janus emulsion droplets using a customized side-view microscopic imaging setup with accompanying pendant dropt measurements disclosed the sensitivity regime of the unique chemical-morphological coupling inside complex emulsions and enabled the recording of calibration curves for the extraction of critical parameters of surfactant effectiveness. The deduced new "responsive drop" method permitted a convenient and cost-efficient quantification and comparison of the critical micelle concentrations (CMCs) and effectiveness of various cationic, anionic, and nonionic surfactants. Moreover, the method allowed insightful characterization of stimuli-responsive surfactants and monitoring of the impact of inorganic salts on the CMC and surfactant effectiveness of ionic and nonionic surfactants. Droplet functionalization with synthetic crown ether surfactants yielded a synthetically minimal material platform capable of autonomous and reversible adaptation to its chemical environment through different supramolecular host-guest recognition events. Addition of metal or ammonium salts resulted in the uptake of the resulting hydrophobic complexes to the hydrocarbon hemisphere, whereas addition of hydrophilic ammonium compounds such as amino acids or polypeptides resulted in supramolecular assemblies at the hydrocarbon-water interface of the droplets. The multiresponsive material platform enabled interfacial complexation and thus triggered responses of the droplets to a variety of chemical triggers including metal ions, ammonium compounds, amino acids, antibodies, carbohydrates as well as amino-functionalized solid surfaces. In the final chapter, the first documented optical logic gates and combinatorial logic circuits based on complex emulsions are presented. More specifically, the unique reconfigurable and multiresponsive properties of complex emulsions were exploited to realize droplet-based logic gates of varying complexity using different stimuli-responsive surfactants in combination with diverse readout methods. In summary, different designs for multiresponsive, active, and adaptive liquid colloidal systems were presented and investigated, enabling the design of novel transformative chemo-intelligent soft material platforms. N2 - Komplexe Emulsionen sind Dispersionen kinetisch stabilisierter mehrphasiger Emulsionströpfchen, die aus zwei oder mehreren nicht mischbaren Flüssigkeiten bestehen und eine neuartige Materialplattform für die Herstellung aktiver und dynamischer weicher Materialien darstellen. In den letzten Jahren haben komplexe Emulsionen aufgrund ihres intrinsisch rekonfigurierbaren morphologischen Verhaltens, dass auf ein einzigartiges Kräftegleichgewicht zwischen den an den verschiedenen Grenzflächen wirkenden Grenzflächenspannungen zurückzuführen ist, zunehmendes wissenschaftliches Interesse erfahren. So wurden insbesondere zweiphasige Janus-Tropfen als strukturelle Vorlagen für die Erzeugung anisotroper Präzisionsobjekte, dynamischer optischer Elemente oder als Wandler und Signalverstärker in Chemo- und Bio-Sensorik-Anwendungen untersucht. In der vorliegenden Arbeit wurden schaltbare interne morphologische Veränderungen komplexer Tröpfchen erforscht, die durch Stimulus-induzierte Verschiebungen des Grenzflächenspannungsgleichgewichts ausgelöst werden. Diese können als universelle Bausteine für das Design multiresponsiver, aktiver und adaptiver flüssiger kolloidaler Systeme dienen. Es wurde eine Reihe von grundlegenden Prinzipien und Mechanismen zur Beeinflussung des Grenzflächenspannungsgleichgewichtes erforscht, die die gezielte Entwicklung von formverändernden, sich an Oberflächen bindenden und in Reaktion auf chemische Stimuli verändernden Emulsionskörpern ermöglicht. Die Kombination des einzigartigen responsiven Verhaltens von Janus-Tropfen mit maßgeschneiderten Tensiden erlaubt die Erschließung von biologisch inspirierten aktiven Materialarchitekturen. So führte beispielsweise die Funktionalisierung von Janus-Tropfen mit einem photo-responsiven Tensid (AzoTAB) zu formverändernden weichen Kolloiden, die ein von Quallen inspiriertes Schwimmverhalten zeigten und damit vielversprechend für die Anwendung im Forschungsfeld der transformierbaren „soft-robotics“ sind. Die In-situ-Beobachtung von sphärischen Janus-Emulsionströpfchen mit einem Seitenansichts-Mikroskop und begleitenden Pendant-Drop-Messungen ermöglichten es das Empfindlichkeitsregime der einzigartigen chemisch-morphologischen Kopplung innerhalb komplexer Emulsionen offenzulegen. Die resultierende Kalibrierungskurve erlaubt die Extraktion von kritischen Parametern der Tensidwirksamkeit. Die daraus abgeleitete neue "responsive drop"-Methode ermöglicht eine einfache, kosteneffiziente Quantifizierung der kritischen Mizellenkonzentrationen (CMCs) und einen Vergleich der Wirksamkeit verschiedener kationischer, anionischer und nichtionischer Tenside. Darüber hinaus ermöglichte die Methode eine aufschlussreiche Charakterisierung Stimuli-responsiver Tenside und die Überwachung des Einflusses anorganischer Salze auf die CMC und die Tensidwirksamkeit ionischer und nichtionischer Tenside. Die Funktionalisierung von Tröpfchen mit synthetischen Kronenether-Tensiden führte zu einer synthetisch minimalen Materialplattform, die in der Lage ist, sich durch verschiedene supramolekulare Wirts-Gast-Erkennungsereignisse selbständig und reversibel an ihre chemische Umgebung anzupassen. Die Zugabe von Metall- oder Ammoniumsalzen hatte eine Aufnahme der resultierenden hydrophoben Komplexe in die Kohlenwasserstoff-Hemisphäre zur Folge, während die Zugabe von hydrophilen Ammoniumverbindungen wie Aminosäuren oder Polypeptiden zu supramolekularen Assemblierungen an der Kohlenwasserstoff-Wasser-Grenzfläche der Tröpfchen führte. Die multiresponsive Materialplattform ermöglicht die Grenzflächenkomplexierung und damit die morphologische Reaktion der Tröpfchen auf eine Vielzahl von chemischen Triggern, darunter Metallionen, Ammoniumverbindungen, Aminosäuren, Antikörper, Kohlenhydrate sowie aminofunktionalisierte feste Oberflächen. Im letzten Kapitel werden die ersten dokumentierten optischen Logikgatter und kombinatorischen Logikschaltungen auf der Grundlage von komplexen Emulsionen vorgestellt. Zur Realisierung von Tropfen-basierten Logikgattern unterschiedlicher Komplexität wurden die einzigartigen rekonfigurierbaren und multiresponsiven Eigenschaften komplexer Emulsionen ausgenutzt. Dabei wurden Stimuli-responsive Tenside in Kombination mit unterschiedlichen Auslesemethoden verwendet. Zusammenfassend wurden verschiedene Designs für multiresponsive, aktive und adaptive flüssige kolloidale Systeme vorgestellt und untersucht, die die Entwicklung neuartiger chemo-intelligenter weicher Materialplattformen ermöglichen. KW - complex emulsion KW - emulsion KW - multiresponsive KW - komplexe Emulsion KW - Emulsion KW - multiresponsiv Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-575203 ER - TY - THES A1 - Kim, Jiyong T1 - Synthesis of InP quantum dots and their applications N2 - Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD–LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics. Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface. Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn–Cu–In–S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694–850 nm yield the highest-ever PL QYs of 71.5–82.4%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress. Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs). Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III–V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis–mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs. Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III–V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements. Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically. N2 - Umweltfreundliche InP Quantenpunkte (QDs) sind technologisch relevant und werden typischerweise als grüne und rote Emitter in Bildschirmen verwendet. Nach dem Stand der Technik kann eine sorgfältig hergestellte Kern-Schale-Heterostruktur (ZnSe innen/ZnS außen) zu außergewöhnlich hohen Photolumineszenz-Quantenausbeuten (PL-QYs) von nahezu Eins (95 - 100 %) führen. Dennoch gibt es bisher nur einige wenige industrielle Anwendungen wie QD-Flüssigkristall-Bildschirme (liquid crystal display, QD-LCD), in denen die Anregung durch eine blaue Hintergrundbeleuchtung realisiert wird. Dabei haben QDs aufgrund ihrer Modifizierbarkeit noch viele weitere industrielle Einsatzmöglichkeiten, beispielsweise QD basierte lichtemittierende Dioden (QD-LEDs) und lumineszierende Solarkollektoren (luminescence solar concentrator, LSC). Vor dem Hauptteil werden in den Kapiteln 1 und 2 die Grundlagen von QDs und die theoretischen Grundlagen basierend auf quantenmechanischer Beschreibung und experimentellen Ergebnissen eingeführt. Zum besseren Verständnis werden: das Konzept der QDs, kolloidale QDs, Kern-Schale-Strukturen vom Typ I, mit Übergangsmetallen dotierte Halbleiter-QDs, die Oberflächenchemie von QDs und ihre Anwendungen (LSC, QD-LEDs und electrohydrodynamic EHD-Jet-Printing), nacheinander eingeführt. Der Schwerpunkt dieser Doktorarbeit liegt hauptsächlich auf der Kombination von QD-Materialien und QD-Bauelementen, basierend auf der Synthese von InP QDs mit einem anorganischen Kern (Kern-Schale-Heterostruktur) und einer organischen Hülle (Oberflächenliganden auf der QD-Oberfläche). In die Kern-Schale-Heterostruktur wird eine ZnCuInS-Mittelschale als Zwischenschicht zwischen einem Cu-dotierten InP Kern und einer ZnS-Schale für LSC-Bauelemente neu eingeführt. Bei den Oberflächenliganden wird der Ligandeneffekt von 1-Oktanthiol und Chloridionen auf die Stabilität von QD-LEDs und die Druckbarkeit mit EHD-Jet-Printing hin untersucht. Dabei erhält der Protonentransfermechanismus auf der QD-Oberfläche ein besonderes Augenmerk. In Kapitel 3 wird die Eintopfsynthese von hocheffizient emittierenden QDs mit einer Cu:InP/Zn-Cu-In-S (ZCIS)/ZnS Kern/Schale/Schale-Heterostruktur beschrieben. Wenn diese neuartige Kombination einer ZCIS/ZnS-Doppelschalenstruktur mit eine Reihe von Cu:InP-Kerne mit unterschiedlichen Größen kombiniert wird, ergeben die daraus entstehenden Cu:InP/ZCIS/ZnS-QDs die bisher höchsten publizierten PL-QYs von 71,5 – 82,4 % im nahen IR-Bereich von 694 – 850 nm mit einstellbarer PL Wellenlänge. Diese Ergebnisse weisen auf die Wirksamkeit der ZCIS-Zwischenschicht hin, welche die Grenzflächenspannung zwischen Kern und Schale effektiv mildert und damit zu einem solch hohen Emissionsvermögen führt. Diese ZCIS-Zwischenschicht wird durch vergleichende Größen-, Struktur- und Zusammensetzungsanalysen weiter untersucht. Am Ende des Kapitels wird der aktuellen Stand der Forschung auf dem Gebiet der LSC-Bauelemente aus solchen Cu:InP/ZCIS/ZnS-QDs vorgestellt. Kapitel 4 befasst sich hauptsächlich mit dem Ligandeneffekt bei der Passivierung mit 1-Oktanthiol von InP/ZnSe/ZnS-QDs im Hinblick auf die unvollständige Oberflächenpassivierung während der Synthese. Es fehlen anionischen Carboxylat-Liganden auf der InP/ZnSe/ZnS-Oberfläche der QDs, an denen Zink Carboxylat Liganden durch Protonentransfer vom 1-Oktanthiol in Carbonsäure-Liganden umgewandelt werden könnten. Die so synthetisierten QDs haben zunächst eine unterkoordinierte Oberfläche mit Leerstellen, die durch Lösungsmittel-Liganden wie Ethanol oder Aceton passiviert werden. Wenn 1-Octanthiol an die QD-Oberfläche bindet bewirkt der Protonentransfer die Bindung von Carboxylat-Liganden (aus Zink-Carboxylat) an die Oberfläche, wobei Ethanol- oder Aceton-Liganden ausgetauscht werden. Systematische Analysen wie Thermogravimetrie (thermogravimetric analysis TGA), Massenspektrometrie (MS) und Protonen-Kernmagnetresonanz (proton nuclear magnetic resonance 1H-NMR) zeigen direkt den Zusammenhang zwischen Oberflächenliganden und QD-LEDs. Kapitel 5 zeigt den Zusammenhang zwischen der Materialstabilität von QDs und der Bauteilstabilität von QD-LEDs durch Untersuchung der Oberflächenchemie und der Schalendicke. In typischen kolloidalen III-V-InP-QDs wird eine anorganische ZnS-Außenhülle auf den InP Kern aufgetragen, um Stabilität zu gewährleisten. In dieser Arbeit wird jedoch eine schnellere Photodegradation von InP/ZnSe/ZnS-QDs mit einer dickeren statt einer dünneren ZnS-Schale gezeigt, wenn 1-Oktanthiol als Schwefelquelle zur Bildung der äußersten ZnS-Schale verwendet wurde. 1-Oktanthiol induziert die Bildung eines schwach gebundenen Carboxylatliganden durch Protonentransfer auf der QD-Oberfläche, was zu einem schnelleren Abbau unter UV-Licht trotz dickerer ZnS-Schale führt. Detailliertere Einblicke in die Oberflächenchemie werden durch 1H-NMR, TGA und MS gewonnen. Überraschenderweise zeigen jedoch die Lebensdauern der aus InP/ZnSe/ZnS-QDs mit dicken oder dünnen ZnS-Hüllen hergestellten EL-Bauelemente eine gegenteilige Stabilität: Die QD-LEDs mit QDs mit dicker ZnS-Hülle haben eine längere Lebensdauer, als jene mit dünner ZnS-Hülle. Es wird der Degradationsmechanismus der QDs und der QD-Leuchtdioden anhand der Ergebnisse erläutert und der Effekt auf die unterschiedlichen Lebensdauern von Material und Bauteil diskutiert. In Kapitel 6 wird eine Methode vorgeschlagen, wie die Druckbarkeit von QD-Tintenformulierungen beim EHD-Jet-Druck über die QD-Materialien verbessert werden kann. Dazu werden InP-QDs mit GaP-Zwischenschalen erweitert, um die Oberflächenladung zu beeinflussen. Darüber hinaus verbessern GaP-Zwischenschalen in III-V kolloidalen InP-QDs deren thermische Stabilität und PL-QY im Falle von Typ-I-Kern/Schale/Schale-Heterostrukturen (InP/GaP/ZnSeS-QDs). Diese stark lumineszierenden InP/GaP/ZnSeS-QDs wurden synthetisiert und für den EHD-Jet-Druck verwendet. Nicht umgesetzte Ga und Cl-Ionen auf der QD-Oberfläche reduzieren die benötigte Betriebsspannung zur Ausbildung eines Taylor-Kegels und eines stabilen Tinten-Jets. Dieses Ergebnis deutet darauf hin, dass die Oberflächenladungen der Quantenpunkte eine wichtige Rolle bei der Ausbildung des Taylor-Kegels spielen. Mittels Zeta-Potenzial-Messung von QD-Tinten wurde eine industriell erprobte und einfache Methode zur Untersuchung der Oberflächenladungen verwendet. Darüber hinaus wurde optische Emissionsspektrometrie mit induktiv gekoppeltem Plasma (inductively coupled plasma-atomic emission spectroscopy ICP-OES) zur Bestimmung der Elementzusammensetzung durchgeführt. Diese Dissertation beschäftigt sich sowohl mit der Synthese von hocheffizienten InP QDs mit schmalbandiger Emission (full width at half maximum FWHM), als auch den Zusammenhängen zwischen QD-Material und QD-Bauelementen. Die Ergebnisse sind einerseits relevant für die breitere industrielle Anwendung dieser Materialien und andererseits für ein tieferes chemisch-physikalisches, theoretisches und experimentelles Verständnis der Prozesse, die zu langlebigen und stabilen Bauelementen führen. KW - colloidal quantum dot KW - Cu doped InP KW - surface chemistry KW - QD stability KW - QD device KW - kolloidaler Quantenpunkt KW - Cu-dotiertes InP KW - Oberflächenchemie KW - QD-Stabilität KW - QD-Gerät Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585351 ER - TY - THES A1 - Lepre, Enrico T1 - Nitrogen-doped carbonaceous materials for energy and catalysis N2 - Facing the environmental crisis, new technologies are needed to sustain our society. In this context, this thesis aims to describe the properties and applications of carbon-based sustainable materials. In particular, it reports the synthesis and characterization of a wide set of porous carbonaceous materials with high nitrogen content obtained from nucleobases. These materials are used as cathodes for Li-ion capacitors, and a major focus is put on the cathode preparation, highlighting the oxidation resistance of nucleobase-derived materials. Furthermore, their catalytic properties for acid/base and redox reactions are described, pointing to the role of nitrogen speciation on their surfaces. Finally, these materials are used as supports for highly dispersed nickel loading, activating the materials for carbon dioxide electroreduction. N2 - Angesichts der Umweltkrise werden neue Technologien benötigt, um unsere Gesellschaft zu erhalten. In diesem Zusammenhang zielt diese Arbeit darauf ab, die Eigenschaften und Anwendungen von nachhaltigen Materialien auf Kohlenstoffbasis zu untersuchen. Insbesondere wird über die Synthese und Charakterisierung eines breiten Spektrums poröser, kohlenstoffhaltiger Materialien berichtet, welche einen hohen Stickstoffgehalt, besitzen und aus Nukleobasen gewonnen werden. Diese Materialien werden als Kathoden für Li-Ionen-Kondensatoren verwendet, wobei der Schwerpunkt auf der Kathodenherstellung liegt und die Oxidationsbeständigkeit, der aus Nukleobasen gewonnenen Materialien, hervorgehoben wird. Darüber hinaus werden ihre katalytischen Eigenschaften für Säure/Base- und Redoxreaktionen beschrieben, wobei die Rolle der Speziierung des Stickstoffs auf ihren Oberflächen hervorgehoben wird. Schließlich werden diese Materialien als Träger für eine hochdisperse Beladung mit Nickel verwendet, wodurch die Materialien für die Kohlendioxid Elektroreduktion aktiviert werden. KW - heteroatom-doped carbons KW - heteroatom-dotierte Kohlenstoffe KW - porous materials KW - poröse Materialien KW - salt melt templating KW - Salzschmelze-Templating KW - heterogeneous catalysis KW - heterogene Katalyse KW - single-atom catalysis KW - Einzelatomkatalyse KW - Li-ion capacitor KW - Li-Ionen-Kondensator Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-577390 ER - TY - THES A1 - Störmann, Florian Konstantin T1 - Multifunctional Microballoons for the active and passive control of fluid-flows N2 - Functional materials, also called "Smart Materials", are described by their ability to fulfill a desired task through targeted interaction with its environment. Due to this functional integration, such materials are of increased interest, especially in areas where the increasing micronization of components is required. Modern manufacturing processes (e.g. microfluidics) and the availability of a wide variety of functional materials (e.g. shape memory materials) now enable the production of particle-based switching components. This category includes micropumps and microvalves, whose basic function is the active control of liquid flows. One approach in realizing those microcomponents as pursued by this work, enables variable size-switching of water-filled microballoons by implementing a stimulus-sensitive switching motif in the capsule's membrane shell, while being under the influence of a constant driving force. The switching motif with its gatekeeper function has a critical influence on one or more material parameters, which modulate the capsule's resistance against the driving force in microballoon expansion process. The advantage of this concept is that even non-variable analyte conditions, such as concentration levels of ions, can be capitalized to generate external force fields that, under the control of the membrane, cause an inflation of the microballoon by an osmotically driven water influx. In case of osmotic pressure gradients as the driving force for the capsule expansion, material parameters associated with the gatekeeper function are specifically the permeability and the mechanical stiffness of the shell material. While a modulation of the shell permeability could be utilized to kinetically impede the water influx on large time scales, a modulation of the shell's mechanical stiffness even might be utilized to completely prevent the capsule inflation due to a possible non-deformability beneath a certain threshold pressure. In polymer networks, which are a suitable material class for the demanded capsule shell because of their excellent elasticity, both the permeability and the mechanical properties are strongly influenced by the crystallinity of the material. Since the permeability is effectively reduced with increasing crystallinity, while the mechanical stiffness is simultaneously greatly increased, both effects point in the same direction in terms of their functional relationship. For this reason and due to a reversible and contactless modulation of the membrane crystallinity by heat input, crystallites may be suitable switching motifs for controlling the capsule expansion. As second design element of reversible expandable microballoons, the capsule geometry, defined by an aqueous core enveloped by the temperature-sensitive polymer network membrane, should allow an osmotic pressure gradient across the membrane layer. The strength of the inflation pressure and the associated inflation velocity upon membrane melting should be controlled by the salt concentration within the aqueous core, while a turn in the osmotic gradient should furthermore allow the reversible process of capsule deflation. Therefore, it should be possible to build either microvalves and micropumps, while their intended action of either pumping or valving is determined by their state of expansion and the direction of the osmotic pressure gradient.. Microballoons of approximately 300 µm in diameter were formed via droplet-based microfluidics from double-emulsion templates (w/o/w). The elastomeric capsule membrane was formed by photo-crosslinking of methacrylate (MA) functionalized oligo(ε-caprolactone) precursors (≈ 3.8 MA-arms, Mn ≈ 12000 g mol-1) within the organic medium layer (o) via UV-exposure after droplet-formation. After removal of the toluene/chloroform mixture by slow extraction via the continuous aqueous phase, the capsules solidified under the development of a characteristic "mushroom"-like shape at specific experimental conditions (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min). It could be furthermore shown that in dependency to the process parameters: oligomer concentration and curing-time also spherical capsules were accessible. Long curing-times and high oligomer concentrations at a fixed light-intensity favored the formation of "mushroom"-like capsules, whereas the contrary led to spherical shaped capsules. A comparative study on thin polymer network films of same composition and equal treatment proved a correlation between the film's crosslink density and their contraction capability, while stronger crosslinked polymer networks showed a stronger contraction after solvent removal. In combination with observations during capsule solidification via light-microscopy, where a continuous shaping from almost spherical crosslinked templates to "mushroom"-shaped and solidified capsules was stated, the following mechanism was proposed. In case of low oligomer contents and short curing-times, the contraction of the capsule shell during solvent removal is strongly diminished due to a low degree of crosslinking. Therefore, the solidifying shell could freely collapse onto the aqueous core. In the other case, high oligomer concentrations and long curing-times will favor the formation of highly crosslinked capsule membranes with a strong contraction capability. Due to an observed decentered location of the aqueous core within the swollen polymer network, an uneven radial stress along the capsule's circumference is exerted to the incompressible core. This lead to an uneven contraction during solvent removal and a directed flow of the core fluid into the direction of the minimal stress vector. In consequence, the initially thicker spherical cap contracts, whereas the opposing thinner spherical cap get stretched. The "mushroom"-shape over some advantages over their spherical shaped counterparts, why they were selected for the further experiments. Besides the necessity of a high density of crosslinking for the purpose of extraordinary elasticity and toughness, the form-anisotropy promotes a faster microballoon expandability due to a partial reduction of the membrane thickness. Additionally, pre-stretched regions of thin thickness might provide a better resistance against inflation pressure than spherical but non-stretched capsules of equal membrane thickness. The resulting "mushroom"-shaped microcapsules exhibited a melting point of Tm ≈ 50 - 60 °C and a degree of crystallinity of Xc ≈ 29 - 38 % depending on the membrane thickness and internal salt content, which is slightly lower than for the non-crosslinked oligomer and reasoned by a limited chain mobility upon crosslinking. Nonetheless, the melting transition of the polymer network was associated with a strong drop in its mechanical stiffness, which was shown to have a strong influence on the osmotic driven expansion of the microcapsules. Capsules that were subjected to osmotic pressures between 1.5 and 4.7 MPa did not expand if the temperature was well below the melting point of the capsule's membrane, i.e. at room temperature. In contrast, a continuous expansion, while approaching asymptotically to a final capsule size, was observed if the temperature exceeded the melting point, i.e. 60 °C. Microballoons, which were kept for 56 days at ∆Π = 1.5 MPa and room temperature, did not change significantly in diameter, why the impact of the mechanical stiffness on the expansion behavior is considered to be the greater than the influence of the shell permeability. The time-resolved expansion behavior of the microballoons above their Tm was subsequently modeled, using difusion equations that were corrected for shape anisotropy and elastic restoring forces. A shape-related and expansion dependent pre-factor was used to dynamically address the influence of the shell thickness differences along the circumference on the inflation velocity, whereas the microballoon's elastic contraction upon inflation was rendered by the inclusion of a hyperelastic constitutive model. An important finding resulting from this model was the pronounced increase in inflation velocity compared to hypothetical capsules with a homogeneous shell thickness, which stresses the benefit of employing shape anisotropic balloon-like capsules in this study. Furthermore, the model was able to predict the finite expandability on basis of entropy-elastic recovery forces and strain-hardening effects. A comparison of six different microballoons with different shell thicknesses and internal salt contents showed the linear relationship between the volumetric expansion, the shell thickness and the applied osmotic pressure, as represented by the model. As the proposed model facilitates the prediction of the expansion kinetics depending on the membranes mechanical and diffusional characteristics, it might be a screening tool for future material selections. In course of the microballoon expansion process, capsules of intermediate diameters could be isolated by recrystallization of the membrane, which is mainly caused by a restoration of the membrane's mechanical stiffness and is otherwise difficult to achieve with other stimuli-sensitive systems. The capsule's crystallinity of intermediate expansion states was nearly unchanged, whereas the lamellar crystal size tends to decreased with the expansion ratio. Therefore, it was assumed that the elastic modulus was only minimally altered and might increased due to the networks segment-chain extension. In addition to the volume increase achieved by inflation, a turn in the osmotic gradient also facilitated the reversible deflation, which was shown in inflation/deflation cycles. These both characteristics of the introduced microballoons are important parameter regarding the realization of micropumps and microvalves. The fixation of expanded microcapsules via recrystallization enabled the storage of entropy-elastic strain-energy, which could be utilized for pumping actions in non-aqueous media. Here, the pumping velocity depended on both, the type of surrounding medium and the applied temperature. Surrounding media that supported the fast transport of pumped liquid showed an accelerated deflation, while high temperatures further accelerate the pumping velocity. Very fast rejection of the incorporated payload was furthermore realized with pierced expanded microballoons, which were subjected to temperatures above their Tm. The possible fixation of intermediate particle sizes provide opportunities for vent constructions that allowed the precise adjustment of specific flow-rates and multiple valve openings and closings. A valve construction was realized by the insertion of a single or multiple microballoons in a microfluidic channel. A complete and a partial closing of the microballoon-valves was demonstrated as a function of the heating period. In this context, a difference between the inflation and deflation velocity was stated, summarizing slower expansion kinetics. Overall, microballoons, which presented both on-demand pumping and reversible valving by a temperature-triggered change in the capsule's volume, might be suitable components that help to design fully integrated LOC devices, due to the implementation of the control switch and controllable inflation/deflation kinetics. In comparison to other state of the art stimuli-sensitive materials, one has to highlight the microballoons capability of stabilizing almost continuously intermediate capsule sizes by simple recrystallization of the microballoon's membrane. N2 - Funktionsmaterialien, auch "Smart Materials" genannt, werden durch ihre Fähigkeit, durch die gezielte Interaktion mit seiner Umgebung eine gewünschte Aufgabe zu erfüllen, beschrieben. Aufgrund dieser Funktionsintegration sind solche Materialien vor allem in Bereichen, in denen die zunehmende Mikronisierung von Bauteilen benötigt wird, von gesteigerten Interesse. Moderne Fertigungsverfahren (z..B. Mikrofluidik) und die Verfügbarkeit verschiedenster Funktionsmaterialien (z.B. Formgedächtnismaterialien) ermöglichen heutzutage die Herstellung partikelbasierter Schaltkomponenten. In diese Kategorie fallen unter anderem Mikropumpen und Mikroventile, deren grundsätzliche Funktion die aktive Steuerung von Flüssigkeitsströmen ist. Ein Ansatz zur Realisierung solcher Mikroschalter, der von dieser Arbeit verfolgt wurde, basiert auf wassergefüllten Mikroballons mit einem integrierten stimuli-sensitiven Schaltelement, welche unter dem Einfluss einer konstanten Antriebskraft eine Gröÿenänderung erfahren. Das Schaltmotiv als kontrollierende Instanz entscheidet dabei über die Auswirkung der einwirkenden Kraft auf die Gröÿenänderung durch ihren Einfluss auf einen oder mehrere Materialparameter. Dies ermöglicht die Ausnutzung nicht-variabler Analytbedingungen, wie zum Beispiel Ionenkonzentrationsunterschiede, zur Erzeugung von Kraftfeldern, welche eine Expansion der Mikroballons durch Osmose hervorrufen. Materialparameter welche mit osmotischen Volumenströmen assoziiert sind und diese steuern, sind im Speziellen die Permeabilität und die mechanische Steifigkeit der Kapselmembran. Durch eine Verringerung der Permeabilität kann die Expansionsgeschwindigkeit der Kapseln kinetisch gehemmt und zu langen Zeitperioden hin verschoben werden, wohingegen eine Verstärkung der mechanischen Steifigkeit die Expansion der Kapseln komplett unterbinden kann, indem der angelegte osmotische Druck unterhalb des zur Dehnung notwendigen Schwellendruck liegt.. In Verbindung mit Polymernetzwerken, welche aufgrund ihrer herausragenden Elastizität und Zähfestigkeit eine geeignete Materialklasse für die Herstellung der Kapselmembran darstellen, sind sowohl die Permeabilität als auch die mechanische Steifigkeit mit der Kristallinität des Materials assoziiert. Grundsätzlich kann festgestellt werden, dass die Permeabilität mit der Kristallinität sinkt, wohingegen die Steifigkeit mit ihr steigt. Die Expansion der Kapseln sollte demnach in Abhängigkeit der Kristallinität des Hüllmaterials ermöglicht oder unterbunden werden können, weswegen sich Kristallite als temperatur-sensitive Schaltmotive eignen sollten. Das zweite Designelement von reversibel expandierbaren Mikroballons wird durch die Kapselgeometrie beschrieben, welche sowohl einen wässrigen Kern als auch eine elastomere, semi-permeable Membran aufweist. Diese Kompartimentierung ermöglicht zum einen die Generierung eines osmotischen Druckgradientens zwischen Kapselkern und Umgebung und zum anderen die Erzeugung einer dünnen und umspannenden Polymermembran. Der osmotische Druck als auch die hiermit einhergehende Expansionsgeschwindigkeit nach Aufschmelzen der Kapselmembran sollte durch das Einstellen des Salzgehaltes des Partikelkerns möglich sein. Eine reversible Kapselschrumpfung nach erfolgter Expansion sollte durch Änderungen des äußeren Salzgehaltes zugänglich sein. Auf Basis dieses Konzepts sollten demnach reversibel schaltbare Mikropumpen und Mikroventile realisierbar sein, wobei die Art ihrer Funktion sowohl von ihrem Expansionszustand als auch von der Richtung des osmotischen Druckgradienten abhängt. Die templat-basierte Erzeugung von Mikroballons mit einem Durchmesser von ca. 300 µm erfolgte aus (w/o/w) Doppelemulsionströpfchen mittels Mikrofluidik. Die elastomere Kapselmembran wurde durch Photovernetzung von Methacrylat funktionalisierten oligo(ϵ-caprolacton) Vorläufern (≈ 3.8 MA-Arme, Mn ≈ 12000 g mol-1) aus der organischen Phase (o) und nach Abschluss der Tröpfchenformierung erzeugt. Nach Verfestigung der Kapselmembran durch langsames extrahieren des Lösungsmittelgemisches (Toluol/Chloroform) über die kontinuierliche wässrige Phase, wurden unter bestimmten Reaktionsbedingungen während der Photovernetzung (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min) formanisotrope "pilzförmige" Mikrokapseln erhalten. Es wurde festgestellt, dass über die Syntheseparameter der Oligomerkonzentration und Belichtungszeit, die Formgebung zwischen kugelförmigen und "pilzförmigen" Kapseln gesteuert werden konnte. Im Fall von niedrigen Oligomerkonzentrationen und kurzen Belichtungszeiten wurden kugelförmige Mikrokapseln und ansonsten "pilzförmige" Kapseln erzeugt. In einer vergleichenden Studie an dünnen Polymernetzwerkfilmen gleicher Zusammensetzung und Behandlung konnte ein Zusammenhang zwischen den beiden Syntheseparametern und der Kontraktilität der Filme bestätigt werden, wobei im Falle höherer Oligomerkonzentrationen und längeren Belichtungszeiten eine stärkere Kontraktion der Filme nach Abdampfen des Lösungsmittelgemisches beobachtet werden konnte. Zusammen mit Beobachtungen eines kontinuierlichen Ausprägens der "Pilzform" von initial annähernd kugelförmigen Kapseln im Laufe des Verfestigungsprozesses mittels Lichtmikroskopie wird folgender Mechanismus der Formausprägung vorgeschlagen. Kapseln mit niedriger Vernetzungsdichte zeigen nur eine geringe Kontraktilität, wodurch das Polymernetzwerk nach Extraktion des Lösungsmittelgemisches frei auf der Kernoberfläche kollabieren kann. Stark vernetzte Kapseln weisen hingegen eine sehr starke Schrumpfung infolge des Lösungsmittelverlustes auf. Aufgrund der nicht mittigen Positionierung des wässrigen Kerns mit Abschluss der Tröpfchenbildung und der darauf ausgebildeten inhomogenen Schichtdickenverteilung ergeben sich unterschiedlich starke radiale Spannungsunterschiede entlang der Membran. Bereiche großer Materialstärke kontrahieren infolge stärker und sorgen für eine Verformung des inkompressiblen wässrigen Kerns in Richtung dünnerer Membransegmente, welche daraufhin gedehnt werden. Nach Abschluss der Membranverfestigung liegen demnach entspannte und stark vorgedehnte Membransegmente vor, die aufgrund der Kristallisation konserviert werden. Die "Pilzform" bietet hinsichtlich der Expansionseigenschaften der Mikroballons einige Vorteile gegenüber ihrem kugelförmigen Pendant, weswegen diese für die weiteren Experimente verwendet wurden. Neben den Anforderung hoher Vernetzungsdichten zum Zwecke der geforderten Elastizität, wird durch die Formanisotropie und der damit verbundenen Schichtdickenunterschiede die Expansionsgeschwindigkeit der Kapseln gesteigert. Weiterhin könnte die Vorstreckung der dünnen Membranschichten eine zusätzliche Stabilität gegenüber dem angelegten osmotischen Drucks aufweisen und somit ein ungewolltes Expandieren unterhalb der Schmelztemperatur erschweren. Die resultierenden "pilzförmigen" Mikroballons wiesen je nach eingestellter Schichtdicke und innerer Salzkonzentration, einen Schmelzpunkt von Tm ≈ 50 - 60 °C und einen Kristallisationsgrad von Xc ≈ 29 - 38 % auf, welche verglichen mit dem unvernetzten PCL Homopolymer geringfügig kleiner waren. Dies liegt zum einen an der erhöhten Anzahl von Kettenenden und zum anderen an der eingeschränkten Kettenmobilität infolge der Oligomervernetzung. Es konnte jedoch weiterhin eine starke Verringerung der mechanischen Steifigkeit nach dem Überschreiten der Schmelztemperatur beobachtet werden. Der große Einfluss der Temperatur auf die Expansion der Mikroballons konnte für mehrere Kapseln bestätigt werden. Kapseln welche einem osmotischen Druck von 1.5 bis 4.7 MPa ausgesetzt waren zeigten keine Größenveränderung bei Raumtemperatur, d.h. weit unterhalb der Schmelztemperatur. Im Gegensatz hierzu wurde eine starke Volumenzunahme aller Kapseln nach dem Überschreiten der Schmelztemperatur, bei 60 °C festgestellt. Mikroballons welche für 56 Tage einem osmotischen Druck von 1.5 MPa bei Raumtemperatur ausgesetzt waren zeigten keine signifikanten Volumenänderungen, weswegen insbesondere der Effekt der mechanischen Erweichung ausschlaggebend für das Schaltprinzip gemacht werden kann. Das zeitaufgelöste Expansionsverhalten der Mikroballons oberhalb ihres Schmelzpunktes wurde daraufhin unter Verwendung von Diffusionsgleichungen, welche für die Formanisotropie und elastische Rückstellkräfte korrigiert wurden, modelliert. Ein formabhängiger Vorfaktor, der die Expansionsgeschwindigkeit in Abhängigkeit der Schichtdickenunterschiede und des Expansionszustandes beschreibt, wurde ebenso eingeführt wie ein Term zur Beschreibung der mechanischen Rückstellkräfte auf Basis eines hyperelastischen Materialmodells. Das Model ermöglichte zum einen eine Beschreibung der endlichen Expandierfähigkeit aufgrund entropie-elastischer Rückstellkräfte sowie aufgrund von Kaltverfestigungen, und zum anderen eine deutliche Beschleunigung des Expandiervorganges aufgrund der Kapselanisotropie. Der Vergleich sechs unterschiedlicher Kapseln mit unterschiedlichen Schichtdicken und inneren Salzgehalten zeigte zudem, in Übereinstimmung mit dem Modell, eine lineare Abhängigkeit von Schichtdicke, osmotischen Druck und der Volumenzunahme. Die mit dem Modell einhergehende Vorhersagemöglichkeit der Expansionskinetik hinsichtlich der mechanischen und diffusionsbedingten Materialcharakteristika stellen somit möglicherweise eine Hilfestellung dar, eine zukünftige Materialauswahl zu treffen. Weiterhin konnte gezeigt werden, dass durch Rekristallisation der Kapselmembran und der damit verbundenen Wiederherstellung der mechanischen Steifigkeit, intermediäre Kapselgrößen isoliert werden konnten, was nach besten Wissen des Standes-der-Technik andernfalls nur schwer zu erreichen ist. Ungeachtet des Expansionsgrades konnten nur geringe Änderungen der Kristallinität festgestellt werden, wohingegen die Kristallgröße mit zunehmender Expansion abnahm. Diesbezüglich wird angenommen dass der Elastizitätsmodulus nur geringfügigen Veränderungen unterliegt oder sogar aufgrund einer Kettenversteifung tendenziell zunimmt. Zusätzlich der Betrachtung einer Volumenzunahme, konnte durch die Änderung des Druckgradienten ebenfalls ein Schrumpfen der Kapseln erreicht werden. Die Reversibilität dieses Prozesses wurde in Expansions/Deflations-Zyklen bestätigt und ist eine wichtige Eigenschaft der Mikroballons hinsichtlich ihrer Verwendung als Mikropumpe und Mikroventil. Die Fixierung expandierter Mikrokapseln durch Rekristallisierung der Membran ermöglichte weiterhin eine Pumpfunktion in nicht-wässrigen Medien. Dabei konnte festgestellt werden, dass die Pumpleistung sowohl von dem umgebenden Medium als auch von der applizierten Temperatur abhingen. Medien, die einen schnellen Abtransport der freigesetzten Flüssigkeit ermöglichten, als auch hohe Temperaturen steigerten hierbei die Pumpleistung. Mikroballons mit einer sehr großen Auswurfleistung konnten durch das Einbringen einer Öffnung in die Membran erzeugt werden. Die Fixierung intermediärer Kapselgrößen ermöglichte Ventilkonstruktionen, welche eine präzise Flussrateneinstellung und ein vielfaches öffnen und Schließen des Ventils ermöglichte. Diese Konstruktionen wurden durch das Einbringen eines oder mehrerer Mikroballons realisiert. Ein teilweises und vollkommenes Schließen dieser Mikroballon-basierten Ventilen wurde mit einem periodischen Versuchsaufbau in Abhängigkeit der Heizperiode gezeigt. Dabei wurden unterschiedliche Expansions- und Deflationskinetiken mit einem schnelleren Schrumpfverhalten bestätigt. Zusammenfassend wurden Mikroballons entwickelt, welche sowohl eine "on-demand" Pumpfunktion als auch eine reversible Ventilfunktion aufweisen. Die Implementierung des Schaltmotives in die Partikelmembran sowie die kontrollierbaren Expansions/Deflationskinetiken machen die Mikroballons gegebenenfalls zu geeigneten Komponenten für hochintegrierbare LOC-Systeme. Im Vergleich zu anderen Stimuli-sensitiven Materialien ist die Möglichkeit der nahezu kontinuierlichen Stabilisierung von intermediärer Partikelgrößen hervorzuheben. Dieses Verhalten wird dabei durch Wechselspiel zwischen Materialeigenschaften und Kapselgeometrie erzeugt. KW - microcapsules KW - expansion KW - stimuli-sensitivity KW - microfluidics KW - polymer network KW - Mikrokapseln KW - expandierbar KW - Stimuli-Sensitivität KW - Mikrofluidik KW - Polymernetzwerk Y1 - 2023 ER - TY - JOUR A1 - Ghassemi, Novid A1 - Opitz, Ben A1 - Brämer, Martin A1 - Gasparjan, David A1 - Sambanis, Michaela A1 - Köster, Hilde A1 - Lücke, Martin A1 - Nordmeier, Volkhard ED - Mientus, Lukas ED - Klempin, Christiane ED - Nowak, Anna T1 - Das „Lehr-Lern-Labor“ als Lehrkonzept zur Förderung einer reflexiven Haltung bei Lehramtsstudent:nnen unterschiedlicher Fächer JF - Reflexion in der Lehrkräftebildung: Empirisch – Phasenübergreifend – Interdisziplinär (Potsdamer Beiträge zur Lehrerbildung und Bildungsforschung ; 4) N2 - Eine reflexive Haltung gegenüber der eigenen Lehrtätigkeit gilt als Schlüsselqualifikation in Bezug auf die Professionalisierung von Lehrer:innen in allen Didaktiken (GFD, 2004, S. 4). Das universitäre Seminarformat Lehr-Lern-Labor (LLLS) kann diese Haltung fördern (Rehfeldt et al., 2018). Das Lehrformat eignet sich außerdem zur Steigerung des Professionswissens und der unterrichtlichen Handlungsfähigkeit angehender Lehrer:innen (Rehfeldt et al., 2020; Brämer & Köster, 2021). Dieser Beitrag stellt, neben der grundsätzlichen Konzeption des Seminarformats, dessen Implementierung in vier verschiedenen Fachdidaktiken (Didaktiken des Englischen, der Geschichte, der Physik und Sachunterricht und seine Didaktik) vor. Ein Fokus liegt dabei auf der unterschiedlichen Umsetzung der Reflexionsphasen. KW - Lehr-Lern-Labor-Seminar KW - Physik KW - Englisch KW - Geschichte KW - Sachunterricht Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-631924 SN - 978-3-86956-566-8 SN - 2626-3556 SN - 2626-4722 IS - 4 SP - 389 EP - 396 PB - Universitätsverlag Potsdam CY - Potsdam ER -