TY  - JOUR
A1  - Inal, Sahika
A1  - Kölsch, Jonas D.
A1  - Sellrie, Frank
A1  - Schenk, Jörg A.
A1  - Wischerhoff, Erik
A1  - Laschewsky, André
A1  - Neher, Dieter
T1  - A water soluble fluorescent polymer as a dual colour sensor for temperature and a specific protein
JF  - Journal of materials chemistry : B, Materials for biology and medicine
N2  - We present two thermoresponsive water soluble copolymers prepared via free radical statistical copolymerization of N-isopropylacrylamide (NIPAm) and of oligo(ethylene glycol) methacrylates (OEGMAs), respectively, with a solvatochromic 7-(diethylamino)-3-carboxy-coumarin (DEAC)-functionalized monomer. In aqueous solutions, the NIPAm-based copolymer exhibits characteristic changes in its fluorescence profile in response to a change in solution temperature as well as to the presence of a specific protein, namely an anti-DEAC antibody. This polymer emits only weakly at low temperatures, but exhibits a marked fluorescence enhancement accompanied by a change in its emission colour when heated above its cloud point. Such drastic changes in the fluorescence and absorbance spectra are observed also upon injection of the anti-DEAC antibody, attributed to the specific binding of the antibody to DEAC moieties. Importantly, protein binding occurs exclusively when the polymer is in the well hydrated state below the cloud point, enabling a temperature control on the molecular recognition event. On the other hand, heating of the polymer-antibody complexes releases a fraction of the bound antibody. In the presence of the DEAC-functionalized monomer in this mixture, the released antibody competitively binds to the monomer and the antibody-free chains of the polymer undergo a more effective collapse and inter-aggregation. In contrast, the emission properties of the OEGMA-based analogous copolymer are rather insensitive to the thermally induced phase transition or to antibody binding. These opposite behaviours underline the need for a carefully tailored molecular design of responsive polymers aimed at specific applications, such as biosensing.
Y1  - 2013
U6  - https://doi.org/10.1039/c3tb21245a
SN  - 2050-750X
SN  - 2050-7518
VL  - 1
IS  - 46
SP  - 6373
EP  - 6381
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Neher, Dieter
A1  - Kniepert, Juliane
A1  - Elimelech, Arik
A1  - Koster, L. Jan Anton
T1  - A New Figure of Merit for Organic Solar Cells with Transport-limited Photocurrents
JF  - Scientific reports
N2  - Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit a to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
Y1  - 2016
U6  - https://doi.org/10.1038/srep24861
SN  - 2045-2322
VL  - 6
SP  - E2348
EP  - E2349
PB  - Nature Publ. Group
CY  - London
ER  - 
TY  - GEN
A1  - Neher, Dieter
A1  - Kniepert, Juliane
A1  - Elimelech, Arik
A1  - Koster, L. Jan Anton
T1  - A New Figure of Merit for Organic Solar Cells with Transport-limited Photocurrents
N2  - Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit α to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 225 
KW  - Electronic and spintronic devices
KW  - Semiconductors
Y1  - 2016
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-91414
ER  - 
TY  - JOUR
A1  - Neher, Dieter
A1  - Kniepert, Juliane
A1  - Elimelech, Arik
A1  - Koster, L. Jan Anton
T1  - A New Figure of Merit for Organic Solar Cells with Transport-limited Photocurrents
JF  - Scientific reports
N2  - Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit α to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
KW  - Electronic and spintronic devices
KW  - Semiconductors
Y1  - 2016
U6  - https://doi.org/10.1038/srep24861
SN  - 2045-2322
VL  - 6
PB  - Nature Publishing Group
CY  - London
ER  - 
TY  - JOUR
A1  - Kietzke, Thomas
A1  - Neher, Dieter
A1  - Kumke, Michael Uwe
A1  - Montenegro, Rivelino V. D.
A1  - Landfester, Katharina
A1  - Scherf, Ullrich
T1  - A nanoparticle approach to control the phase separation in polyfluorene photovoltaic devices
N2  - Polymer solar cell devices with nanostructured blend layers have been fabricated using single- and dual- component polymer nanospheres. Starting from an electron-donating and an electron-accepting polyfluorene derivative, PFB and F8BT, dissolved in suitable organic solvents, dispersions of solid particles with mean diameters of ca. 50 nm, containing either the pure polymer components or a mixture of PFB and F8BT in each particle, were prepared with the miniemulsion process. Photovoltaic devices based on these particles have been studied with respect to the correlation between external quantum efficiency and layer composition. It is shown that the properties of devices containing a blend of single-component PFB and F8BT particles differ significantly from those of solar cells based on blend particles, even for the same layer composition. Various factors determining the quantum efficiency in both kinds of devices are identified and discussed, taking into account the spectroscopic properties of the particles. An external quantum efficiency of ca. 4% is measured for a device made from polymer blend nanoparticles containing PFB:F8BT at a weight ratio of 1:2 in each individual nanosphere. This is among the highest values reported so far for photovoltaic cells using this material combination
Y1  - 2004
ER  - 
TY  - JOUR
A1  - Kniepert, Juliane
A1  - Lange, Ilja
A1  - van der Kaap, Niels J.
A1  - Koster, L. Jan Anton
A1  - Neher, Dieter
T1  - A conclusive view on charge generation, recombination, and extraction in As-prepared and annealed P3HT:PCBM blends: combined experimental and simulation work
JF  - dvanced energy materials
N2  - Time-delayed collection field (TDCF) and bias-amplified charge extraction (BACE) are applied to as-prepared and annealed poly(3-hexylthiophene):[6,6]-phenyl C-71 butyric acid methyl ester (P3HT:PCBM) blends coated from chloroform. Despite large differences in fill factor, short-circuit current, and power conversion efficiency, both blends exhibit a negligible dependence of photogeneration on the electric field and strictly bimolecular recombination (BMR) with a weak dependence of the BMR coefficient on charge density. Drift-diffusion simulations are performed using the measured coefficients and mobilities, taking into account bimolecular recombination and the possible effects of surface recombination. The excellent agreement between the simulation and the experimental data for an intensity range covering two orders of magnitude indicates that a field-independent generation rate and a density-independent recombination coefficient describe the current-voltage characteristics of the annealed P3HT: PCBM devices, while the performance of the as-prepared blend is shown to be limited by space charge effects due to a low hole mobility. Finally, even though the bimolecular recombination coefficient is small, surface recombination is found to be a negligible loss mechanism in these solar cells.
Y1  - 2014
U6  - https://doi.org/10.1002/aenm.201301401
SN  - 1614-6832
SN  - 1614-6840
VL  - 4
IS  - 7
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Schulze, Patricia S. C.
A1  - Bett, Alexander J.
A1  - Bivour, Martin
A1  - Caprioglio, Pietro
A1  - Gerspacher, Fabian M.
A1  - Kabaklı, Özde Ş.
A1  - Richter, Armin
A1  - Stolterfoht, Martin
A1  - Zhang, Qinxin
A1  - Neher, Dieter
A1  - Hermle, Martin
A1  - Hillebrecht, Harald
A1  - Glunz, Stefan W.
A1  - Goldschmidt, Jan Christoph
T1  - 25.1% high-efficiency monolithic perovskite silicon tandem solar cell with a high bandgap perovskite absorber
T2  - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1197 
KW  - heterojunction silicon solar cells
KW  - interfaces
KW  - perovskite solar cells
KW  - tandem solar cells
KW  - thin films
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525668
SN  - 1866-8372
IS  - 7
ER  - 
TY  - JOUR
A1  - Schulze, Patricia S. C.
A1  - Bett, Alexander J.
A1  - Bivour, Martin
A1  - Caprioglio, Pietro
A1  - Gerspacher, Fabian M.
A1  - Kabaklı, Özde Ş.
A1  - Richter, Armin
A1  - Stolterfoht, Martin
A1  - Zhang, Qinxin
A1  - Neher, Dieter
A1  - Hermle, Martin
A1  - Hillebrecht, Harald
A1  - Glunz, Stefan W.
A1  - Goldschmidt, Jan Christoph
T1  - 25.1% high-efficiency monolithic perovskite silicon tandem solar cell with a high bandgap perovskite absorber
JF  - Solar RRL
N2  - Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
KW  - heterojunction silicon solar cells
KW  - interfaces
KW  - perovskite solar cells
KW  - tandem solar cells
KW  - thin films
Y1  - 2020
VL  - 4
IS  - 7
PB  - John Wiley & Sons, Inc.
CY  - New Jersey
ER  - 
TY  - JOUR
A1  - Chen, Zupeng
A1  - Savateev, Aleksandr
A1  - Pronkin, Sergey
A1  - Papaefthimiou, Vasiliki
A1  - Wolff, Christian Michael
A1  - Willinger, Marc Georg
A1  - Willinger, Elena
A1  - Neher, Dieter
A1  - Antonietti, Markus
A1  - Dontsova, Dariya
T1  - "The Easier the Better" Preparation of Efficient Photocatalysts-Metastable Poly(heptazine imide) Salts
JF  - Advanced materials
N2  - Cost-efficient, visible-light-driven hydrogen production from water is an attractive potential source of clean, sustainable fuel. Here, it is shown that thermal solid state reactions of traditional carbon nitride precursors (cyanamide, melamine) with NaCl, KCl, or CsCl are a cheap and straightforward way to prepare poly(heptazine imide) alkali metal salts, whose thermodynamic stability decreases upon the increase of the metal atom size. The chemical structure of the prepared salts is confirmed by the results of X-ray photoelectron and infrared spectroscopies, powder X-ray diffraction and electron microscopy studies, and, in the case of sodium poly(heptazine imide), additionally by atomic pair distribution function analysis and 2D powder X-ray diffraction pattern simulations. In contrast, reactions with LiCl yield thermodynamically stable poly(triazine imides). Owing to the metastability and high structural order, the obtained heptazine imide salts are found to be highly active photo-catalysts in Rhodamine B and 4-chlorophenol degradation, and Pt-assisted sacrificial water reduction reactions under visible light irradiation. The measured hydrogen evolution rates are up to four times higher than those provided by a benchmark photocatalyst, mesoporous graphitic carbon nitride. Moreover, the products are able to photocatalytically reduce water with considerable reaction rates, even when glycerol is used as a sacrificial hole scavenger.
KW  - carbon nitride
KW  - glycerol oxidation
KW  - mesocrystals
KW  - poly(heptazine imide)
KW  - water reduction reactions
Y1  - 2017
U6  - https://doi.org/10.1002/adma.201700555
SN  - 0935-9648
SN  - 1521-4095
VL  - 29
SP  - 21800
EP  - 21806
PB  - Wiley-VCH
CY  - Weinheim
ER  -