TY  - JOUR
A1  - Gorenflot, Julien
A1  - Paulke, Andreas
A1  - Piersimoni, Fortunato
A1  - Wolf, Jannic
A1  - Kan, Zhipeng
A1  - Cruciani, Federico
A1  - El Labban, Abdulrahman
A1  - Neher, Dieter
A1  - Beaujuge, Pierre M.
A1  - Laquai, Frederic
T1  - From recombination dynamics to device performance
BT  - quantifying the efficiency of exciton dissociation, charge separation, and extraction in bulk heterojunction solar cells with Fluorine-Substituted polymer donors
JF  - dvanced energy materials
N2  - An original set of experimental and modeling tools is used to quantify the yield of each of the physical processes leading to photocurrent generation in organic bulk heterojunction solar cells, enabling evaluation of materials and processing condition beyond the trivial comparison of device performances. Transient absorption spectroscopy, “the” technique to monitor all intermediate states over the entire relevant timescale, is combined with time-delayed collection field experiments, transfer matrix simulations, spectral deconvolution, and parametrization of the charge carrier recombination by a two-pool model, allowing quantification of densities of excitons and charges and extrapolation of their kinetics to device-relevant conditions. Photon absorption, charge transfer, charge separation, and charge extraction are all quantified for two recently developed wide-bandgap donor polymers: poly(4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b′]dithiophene-3,4-difluorothiophene) (PBDT[2F]T) and its nonfluorinated counterpart poly(4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b′]dithiophene-3,4-thiophene) (PBDT[2H]T) combined with PC71BM in bulk heterojunctions. The product of these yields is shown to agree well with the devices' external quantum efficiency. This methodology elucidates in the specific case studied here the origin of improved photocurrents obtained when using PBDT[2F]T instead of PBDT[2H]T as well as upon using solvent additives. Furthermore, a higher charge transfer (CT)-state energy is shown to lead to significantly lower energy losses (resulting in higher VOC) during charge generation compared to P3HT:PCBM.
KW  - bulk heterojunction
KW  - charge generation yield
KW  - charge recombination yield
KW  - polymer solar cells
KW  - transient absorption spectroscopy
Y1  - 2018
U6  - https://doi.org/10.1002/aenm.201701678
SN  - 1614-6832
SN  - 1614-6840
VL  - 8
IS  - 4
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Shivhare, Rishi
A1  - Erdmann, Tim
A1  - Hoermann, Ulrich
A1  - Collado-Fregoso, Elisa
A1  - Zeiske, Stefan
A1  - Benduhn, Johannes
A1  - Ullbrich, Sascha
A1  - Huebner, Rene
A1  - Hambsch, Mike
A1  - Kiriy, Anton
A1  - Voit, Brigitte
A1  - Neher, Dieter
A1  - Vandewal, Koen
A1  - Mannsfeld, Stefan C. B.
T1  - Alkyl Branching Position in Diketopyrrolopyrrole Polymers
BT  - Interplay between Fibrillar Morphology and Crystallinity and Their Effect on Photogeneration and Recombination in Bulk-Heterojunction Solar Cells
JF  - Chemistry of materials : a publication of the American Chemical Society
N2  - Diketopyrrolopyrrole (DPP)-based donor acceptor copolymers have gained a significant amount of research interest in the organic electronics community because of their high charge carrier mobilities in organic field-effect transistors (OFETs) and their ability to harvest near-infrared (NIR) photons in solar cells. In this study, we have synthesized four DPP based donor-acceptor copolymers with variations in the donor unit and the branching point of the solubilizing alkyl chains (at the second or sixth carbon position). Grazing incidence wide-angle X-ray scattering (GIWAXS) results suggest that moving the branching point further away from the polymer backbone increases the tendency for aggregation and yields polymer phases with a higher degree of crystallinity (DoC). The polymers were blended with PC70BM and used as active layers in solar cells. A careful analysis of the energetics of the neat polymer and blend films reveals that the charge-transfer state energy (E-CT) of the blend films lies exceptionally close to the singlet energy of the donor (E-D*), indicating near zero electron transfer losses. The difference between the optical gap and open-circuit voltage (V-OC) is therefore determined to be due to rather high nonradiative 418 +/- 13 mV) and unavoidable radiative voltage losses (approximate to 255 +/- 8 mV). Even though the four materials have similar optical gaps, the short-circuit current density (J(SC)) covers a vast span from 7 to 18 mA cm(-2) for the best performing system. Using photoluminescence (PL) quenching and transient charge extraction techniques, we quantify geminate and nongeminate losses and find that fewer excitons reach the donor-acceptor interface in polymers with further away branching points due to larger aggregate sizes. In these material systems, the photogeneration is therefore mainly limited by exciton harvesting efficiency.
Y1  - 2018
U6  - https://doi.org/10.1021/acs.chemmater.8b02739
SN  - 0897-4756
SN  - 1520-5002
VL  - 30
IS  - 19
SP  - 6801
EP  - 6809
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Braunger, Steffen
A1  - Mundt, Laura E.
A1  - Wolff, Christian Michael
A1  - Mews, Mathias
A1  - Rehermann, Carolin
A1  - Jost, Marko
A1  - Tejada, Alvaro
A1  - Eisenhauer, David
A1  - Becker, Christiane
A1  - Andres Guerra, Jorge
A1  - Unger, Eva
A1  - Korte, Lars
A1  - Neher, Dieter
A1  - Schubert, Martin C.
A1  - Rech, Bernd
A1  - Albrecht, Steve
T1  - Cs(x)FA(1-x)Pb(l(1-y)Br(y))(3) Perovskite Compositions
BT  - the Appearance of Wrinkled Morphology and its Impact on Solar Cell Performance
JF  - The journal of physical chemistry : C, Nanomaterials and interfaces
N2  - We report on the formation of wrinkle-patterned surface morphologies in cesium formamidinium-based Cs(x)FA(1-y)Pb(I1-yBry)(3) perovskite compositions with x = 0-0.3 and y = 0-0.3 under various spin-coating conditions. By varying the Cs and Br contents, the perovskite precursor solution concentration and the spin-coating procedure, the occurrence and characteristics of the wrinkle-shaped morphology can be tailored systematically. Cs(0.17)FA(0.83)Pb(I0.83Br0.17)(3) perovskite layers were analyzed regarding their surface roughness, microscopic structure, local and overall composition, and optoelectronic properties. Application of these films in p-i-n perovskite solar cells (PSCs) with indium-doped tin oxide/NiOx/perovskite/C-60/bathocuproine/Cu architecture resulted in up to 15.3 and 17.0% power conversion efficiency for the flat and wrinkled morphology, respectively. Interestingly, we find slightly red-shifted photoluminescence (PL) peaks for wrinkled areas and we are able to directly correlate surface topography with PL peak mapping. This is attributed to differences in the local grain size, whereas there is no indication for compositional demixing in the films. We show that the perovskite composition, crystallization kinetics, and layer thickness strongly influence the formation of wrinkles which is proposed to be related to the release of compressive strain during perovskite crystallization. Our work helps us to better understand film formation and to further improve the efficiency of PSCs with widely used mixed-perovskite compositions.
Y1  - 2018
U6  - https://doi.org/10.1021/acs.jpcc.8b06459
SN  - 1932-7447
SN  - 1932-7455
VL  - 122
IS  - 30
SP  - 17123
EP  - 17135
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Benduhn, Johannes
A1  - Piersimoni, Fortunato
A1  - Londi, Giacomo
A1  - Kirch, Anton
A1  - Widmer, Johannes
A1  - Koerner, Christian
A1  - Beljonne, David
A1  - Neher, Dieter
A1  - Spoltore, Donato
A1  - Vandewal, Koen
T1  - Impact of triplet excited states on the open-circuit voltage of organic solar cells
JF  - dvanced energy materials
N2  - The best organic solar cells (OSCs) achieve comparable peak external quantum efficiencies and fill factors as conventional photovoltaic devices. However, their voltage losses are much higher, in particular those due to nonradiative recombination. To investigate the possible role of triplet states on the donor or acceptor materials in this process, model systems comprising Zn- and Cu-phthalocyanine (Pc), as well as fluorinated versions of these donors, combined with C-60 as acceptor are studied. Fluorination allows tuning the energy level alignment between the lowest energy triplet state (T-1) and the charge-transfer (CT) state, while the replacement of Zn by Cu as the central metal in the Pcs leads to a largely enhanced spin-orbit coupling. Only in the latter case, a substantial influence of the triplet state on the nonradiative voltage losses is observed. In contrast, it is found that for a large series of typical OSC materials, the relative energy level alignment between T-1 and the CT state does not substantially affect nonradiative voltage losses.
KW  - charge-transfer states
KW  - nonradiative voltage losses
KW  - organic solar cells
KW  - triplet excited states
Y1  - 2018
U6  - https://doi.org/10.1002/aenm.201800451
SN  - 1614-6832
SN  - 1614-6840
VL  - 8
IS  - 21
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Hörmann, Ulrich
A1  - Zeiske, Stefan
A1  - Piersimoni, Fortunato
A1  - Hoffmann, Lukas
A1  - Schlesinger, Raphael
A1  - Koch, Norbert
A1  - Riedl, Thomas
A1  - Andrienko, Denis
A1  - Neher, Dieter
T1  - Stark effect of hybrid charge transfer states at planar ZnO/organic interfaces
JF  - Physical review : B, Condensed matter and materials physics
N2  - We investigate the bias dependence of the hybrid charge transfer state emission at planar heterojunctions between the metal oxide acceptor ZnO and three donor molecules. The electroluminescence peak energy linearly increases with the applied bias, saturating at high fields. Variation of the organic layer thickness and deliberate change of the ZnO conductivity through controlled photodoping allow us to confirm that this bias-induced spectral shift relates to the internal electric field in the organic layer rather than the filling of states at the hybrid interface. We show that existing continuum models overestimate the hole delocalization and propose a simple electrostatic model in which the linear and quadratic Stark effects are explained by the electrostatic interaction of a strongly polarizable molecular cation with its mirror image.
Y1  - 2018
U6  - https://doi.org/10.1103/PhysRevB.98.155312
SN  - 2469-9950
SN  - 2469-9969
VL  - 98
IS  - 15
PB  - American Physical Society
CY  - College Park
ER  - 
TY  - JOUR
A1  - Kurpiers, Jona
A1  - Ferron, Thomas
A1  - Roland, Steffen
A1  - Jakoby, Marius
A1  - Thiede, Tobias
A1  - Jaiser, Frank
A1  - Albrecht, Steve
A1  - Janietz, Silvia
A1  - Collins, Brian A.
A1  - Howard, Ian A.
A1  - Neher, Dieter
T1  - Probing the pathways of free charge generation in organic bulk heterojunction solar cells
JF  - Nature Communications
N2  - The fact that organic solar cells perform efficiently despite the low dielectric constant of most photoactive blends initiated a long-standing debate regarding the dominant pathways of free charge formation. Here, we address this issue through the accurate measurement of the activation energy for free charge photogeneration over a wide range of photon energy, using the method of time-delayed collection field. For our prototypical low bandgap polymer:fullerene blends, we find that neither the temperature nor the field dependence of free charge generation depend on the excitation energy, ruling out an appreciable contribution to free charge generation though hot carrier pathways. On the other hand, activation energies are on the order of the room temperature thermal energy for all studied blends. We conclude that charge generation in such devices proceeds through thermalized charge transfer states, and that thermal energy is sufficient to separate most of these states into free charges.
Y1  - 2018
U6  - https://doi.org/10.1038/s41467-018-04386-3
SN  - 2041-1723
VL  - 9
PB  - Nature Publ. Group
CY  - London
ER  - 
TY  - JOUR
A1  - Sini, Gjergji
A1  - Schubert, Marcel
A1  - Risko, Chad
A1  - Roland, Steffen
A1  - Lee, Olivia P.
A1  - Chen, Zhihua
A1  - Richter, Thomas V.
A1  - Dolfen, Daniel
A1  - Coropceanu, Veaceslav
A1  - Ludwigs, Sabine
A1  - Scherf, Ullrich
A1  - Facchetti, Antonio
A1  - Frechet, Jean M. J.
A1  - Neher, Dieter
T1  - On the Molecular Origin of Charge Separation at the Donor-Acceptor Interface
JF  - Advanced energy materials
N2  - Fullerene-based acceptors have dominated organic solar cells for almost two decades. It is only within the last few years that alternative acceptors rival their dominance, introducing much more flexibility in the optoelectronic properties of these material blends. However, a fundamental physical understanding of the processes that drive charge separation at organic heterojunctions is still missing, but urgently needed to direct further material improvements. Here a combined experimental and theoretical approach is used to understand the intimate mechanisms by which molecular structure contributes to exciton dissociation, charge separation, and charge recombination at the donor-acceptor (D-A) interface. Model systems comprised of polythiophene-based donor and rylene diimide-based acceptor polymers are used and a detailed density functional theory (DFT) investigation is performed. The results point to the roles that geometric deformations and direct-contact intermolecular polarization play in establishing a driving force ( energy gradient) for the optoelectronic processes taking place at the interface. A substantial impact for this driving force is found to stem from polymer deformations at the interface, a finding that can clearly lead to new design approaches in the development of the next generation of conjugated polymers and small molecules.
KW  - donor-acceptor interfaces
KW  - energy gradients
KW  - geometrical deformations
KW  - nonfullerene acceptors
KW  - organic photovoltaics
KW  - photocurrent generation
KW  - polymer solar cells
Y1  - 2018
U6  - https://doi.org/10.1002/aenm.201702232
SN  - 1614-6832
SN  - 1614-6840
VL  - 8
IS  - 12
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Ran, Niva A.
A1  - Love, John A.
A1  - Heiber, Michael C.
A1  - Jiao, Xuechen
A1  - Hughes, Michael P.
A1  - Karki, Akchheta
A1  - Wang, Ming
A1  - Brus, Viktor V.
A1  - Wang, Hengbin
A1  - Neher, Dieter
A1  - Ade, Harald
A1  - Bazan, Guillermo C.
A1  - Thuc-Quyen Nguyen, 
T1  - Charge generation and recombination in an organic solar cell with low energetic offsets
JF  - dvanced energy materials
N2  - Organic bulk heterojunction (BHJ) solar cells require energetic offsets between the donor and acceptor to obtain high short-circuit currents (J(SC)) and fill factors (FF). However, it is necessary to reduce the energetic offsets to achieve high open-circuit voltages (V-OC). Recently, reports have highlighted BHJ blends that are pushing at the accepted limits of energetic offsets necessary for high efficiency. Unfortunately, most of these BHJs have modest FF values. How the energetic offset impacts the solar cell characteristics thus remains poorly understood. Here, a comprehensive characterization of the losses in a polymer:fullerene BHJ blend, PIPCP:phenyl-C61-butyric acid methyl ester (PC61BM), that achieves a high V-OC (0.9 V) with very low energy losses (E-loss = 0.52 eV) from the energy of absorbed photons, a respectable J(SC) (13 mA cm(-2)), but a limited FF (54%) is reported. Despite the low energetic offset, the system does not suffer from field-dependent generation and instead it is characterized by very fast nongeminate recombination and the presence of shallow traps. The charge-carrier losses are attributed to suboptimal morphology due to high miscibility between PIPCP and PC61BM. These results hold promise that given the appropriate morphology, the J(SC), V-OC, and FF can all be improved, even with very low energetic offsets.
KW  - energetic offset
KW  - fill factor
KW  - morphology
KW  - organic solar cells
KW  - recombination
Y1  - 2018
U6  - https://doi.org/10.1002/aenm.201701073
SN  - 1614-6832
SN  - 1614-6840
VL  - 8
IS  - 5
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Alqahtani, Obaid
A1  - Babics, Maxime
A1  - Gorenflot, Julien
A1  - Savikhin, Victoria
A1  - Ferron, Thomas
A1  - Balawi, Ahmed H.
A1  - Paulke, Andreas
A1  - Kan, Zhipeng
A1  - Pope, Michael
A1  - Clulow, Andrew J.
A1  - Wolf, Jannic
A1  - Burn, Paul L.
A1  - Gentle, Ian R.
A1  - Neher, Dieter
A1  - Toney, Michael F.
A1  - Laquai, Frederic
A1  - Beaujuge, Pierre M.
A1  - Collins, Brian A.
T1  - Mixed Domains Enhance Charge Generation and Extraction in Bulk-Heterojunction Solar Cells with Small-Molecule Donors
JF  - Advanced energy materials
N2  - The interplay between nanomorphology and efficiency of polymer-fullerene bulk-heterojunction (BHJ) solar cells has been the subject of intense research, but the generality of these concepts for small-molecule (SM) BHJs remains unclear. Here, the relation between performance; charge generation, recombination, and extraction dynamics; and nanomorphology achievable with two SM donors benzo[1,2-b:4,5-b]dithiophene-pyrido[3,4-b]-pyrazine BDT(PPTh2)(2), namely SM1 and SM2, differing by their side-chains, are examined as a function of solution additive composition. The results show that the additive 1,8-diiodooctane acts as a plasticizer in the blends, increases domain size, and promotes ordering/crystallinity. Surprisingly, the system with high domain purity (SM1) exhibits both poor exciton harvesting and severe charge trapping, alleviated only slightly with increased crystallinity. In contrast, the system consisting of mixed domains and lower crystallinity (SM2) shows both excellent exciton harvesting and low charge recombination losses. Importantly, the onset of large, pure crystallites in the latter (SM2) system reduces efficiency, pointing to possible differences in the ideal morphologies for SM-based BHJ solar cells compared with polymer-fullerene devices. In polymer-based systems, tie chains between pure polymer crystals establish a continuous charge transport network, whereas SM-based active layers may in some cases require mixed domains that enable both aggregation and charge percolation to the electrodes.
KW  - charge transport
KW  - domain purity
KW  - microscopy
KW  - mixed domains
KW  - organic solar cells
KW  - photovoltaic devices
KW  - resonant X-ray scattering
KW  - small molecules
KW  - transient spectroscopy
Y1  - 2018
U6  - https://doi.org/10.1002/aenm.201702941
SN  - 1614-6832
SN  - 1614-6840
VL  - 8
IS  - 19
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Li, Tian-yi
A1  - Benduhn, Johannes
A1  - Li, Yue
A1  - Jaiser, Frank
A1  - Spoltore, Donato
A1  - Zeika, Olaf
A1  - Ma, Zaifei
A1  - Neher, Dieter
A1  - Vandewal, Koen
A1  - Leo, Karl
T1  - Boron dipyrromethene (BODIPY) with meso-perfluorinated alkyl substituents as near infrared donors in organic solar cells
JF  - Journal of materials chemistry : A, Materials for energy and sustainability
N2  - Three furan-fused BODIPYs were synthesized with perfluorinated methyl, ethyl and n-propyl groups on the meso-carbon. They were obtained with high yields by reacting the furan-fused 2-carboxylpyrrole in corresponding perfluorinated acid and anhydride. With the increase in perfluorinated alkyl chain length, the molecular packing in the single crystal is influenced, showing increasing stacking distance and decreasing slope angle. All the BODIPYs were characterized as intense absorbers in near infrared region in solid state, peaking at similar to 800 nm with absorption coefficient of over 280 000 cm(-1). Facilitated by high thermal stability, the furan-fused BODIPYs were employed in vacuum-deposited organic solar cells as electron donors. All devices exhibit PCE over 6.0% with the EQE maximum reaching 70% at similar to 790 nm. The chemical modification of the BODIPY donors have certain influence on the active layer morphology, and the highest PCE of 6.4% was obtained with a notably high jsc of 13.6 mA cm(-2). Sensitive EQE and electroluminance studies indicated that the energy losses generated by the formation of a charge transfer state and the radiative recombination at the donor-acceptor interface were comparable in the range of 0.14-0.19 V, while non-radiative recombination energy loss of 0.38 V was the main energy loss route resulting in the moderate V-oc of 0.76 V.
Y1  - 2018
U6  - https://doi.org/10.1039/c8ta06261g
SN  - 2050-7488
SN  - 2050-7496
VL  - 6
IS  - 38
SP  - 18583
EP  - 18591
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - GEN
A1  - Saliba, Michael
A1  - Stolterfoht, Martin
A1  - Wolff, Christian Michael
A1  - Neher, Dieter
A1  - Abate, Antonio
T1  - Measuring aging stability of perovskite solar cells
T2  - Joule
Y1  - 2018
U6  - https://doi.org/10.1016/j.joule.2018.05.005
SN  - 2542-4351
VL  - 2
IS  - 6
SP  - 1019
EP  - 1024
PB  - Cell Press
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Zhang, Shanshan
A1  - Stolterfoht, Martin
A1  - Armin, Ardalan
A1  - Lin, Qianqian
A1  - Zu, Fengshuo
A1  - Sobus, Jan
A1  - Jin, Hui
A1  - Koch, Norbert
A1  - Meredith, Paul
A1  - Burn, Paul L.
A1  - Neher, Dieter
T1  - Interface Engineering of Solution-Processed Hybrid Organohalide Perovskite Solar Cells
JF  - ACS applied materials & interfaces
N2  - Engineering the interface between the perovskite absorber and the charge-transporting layers has become an important method for improving the charge extraction and open-circuit voltage (V-OC) of hybrid perovskite solar cells. Conjugated polymers are particularly suited to form the hole-transporting layer, but their hydrophobicity renders it difficult to solution-process the perovskite absorber on top. Herein, oxygen plasma treatment is introduced as a simple means to change the surface energy and work function of hydrophobic polymer interlayers for use as p-contacts in perovskite solar cells. We find that upon oxygen plasma treatment, the hydrophobic surfaces of different prototypical p-type polymers became sufficiently hydrophilic to enable subsequent perovskite junction processing. In addition, the oxygen plasma treatment also increased the ionization potential of the polymer such that it became closer to the valance band energy of the perovskite. It was also found that the oxygen plasma treatment could increase the electrical conductivity of the p-type polymers, facilitating more efficient charge extraction. On the basis of this concept, inverted MAPbI(3) perovskite devices with different oxygen plasma-treated polymers such as P3HT, P3OT, polyTPD, or PTAA were fabricated with power conversion efficiencies of up to 19%.
KW  - organohalide lead perovskites
KW  - solar cells
KW  - surface wetting
KW  - work function
KW  - oxygen plasma
KW  - transport layer
Y1  - 2018
U6  - https://doi.org/10.1021/acsami.8b02503
SN  - 1944-8244
VL  - 10
IS  - 25
SP  - 21681
EP  - 21687
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Stolterfoht, Martin
A1  - Wolff, Christian Michael
A1  - Marquez, Jose A.
A1  - Zhang, Shanshan
A1  - Hages, Charles J.
A1  - Rothhardt, Daniel
A1  - Albrecht, Steve
A1  - Burn, Paul L.
A1  - Meredith, Paul
A1  - Unold, Thomas
A1  - Neher, Dieter
T1  - Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells
JF  - Nature Energy
N2  - The performance of perovskite solar cells is predominantly limited by non-radiative recombination, either through trap-assisted recombination in the absorber layer or via minority carrier recombination at the perovskite/transport layer interfaces. Here, we use transient and absolute photoluminescence imaging to visualize all non-radiative recombination pathways in planar pintype perovskite solar cells with undoped organic charge transport layers. We find significant quasi-Fermi-level splitting losses (135 meV) in the perovskite bulk, whereas interfacial recombination results in an additional free energy loss of 80 meV at each individual interface, which limits the open-circuit voltage (V-oc) of the complete cell to similar to 1.12 V. Inserting ultrathin interlayers between the perovskite and transport layers leads to a substantial reduction of these interfacial losses at both the p and n contacts. Using this knowledge and approach, we demonstrate reproducible dopant-free 1 cm(2) perovskite solar cells surpassing 20% efficiency (19.83% certified) with stabilized power output, a high V-oc (1.17 V) and record fill factor (>81%).
KW  - Energy science and technology
KW  - Solar cells
Y1  - 2018
U6  - https://doi.org/10.1038/s41560-018-0219-8
SN  - 2058-7546
VL  - 3
IS  - 10
SP  - 847
EP  - 854
PB  - Nature Publ. Group
CY  - London
ER  - 
TY  - JOUR
A1  - Shoaee, Safa
A1  - Stolterfoht, Martin
A1  - Neher, Dieter
T1  - The Role of Mobility on Charge Generation, Recombination, and Extraction in Polymer-Based Solar Cells
JF  - dvanced energy materials
N2  - Organic semiconductors are of great interest for a broad range of optoelectronic applications due to their solution processability, chemical tunability, highly scalable fabrication, and mechanical flexibility. In contrast to traditional inorganic semiconductors, organic semiconductors are intrinsically disordered systems and therefore exhibit much lower charge carrier mobilities-the Achilles heel of organic photovoltaic cells. In this progress review, the authors discuss recent important developments on the impact of charge carrier mobility on the charge transfer state dissociation, and the interplay of free charge extraction and recombination. By comparing the mobilities on different timescales obtained by different techniques, the authors highlight the dispersive nature of these materials and how this reflects on the key processes defining the efficiency of organic photovoltaics.
KW  - charge generation
KW  - charge recombination
KW  - extraction
KW  - mobility
KW  - organic solar cells
KW  - polymer:fullerene bulk heterojunction
Y1  - 2018
U6  - https://doi.org/10.1002/aenm.201703355
SN  - 1614-6832
SN  - 1614-6840
VL  - 8
IS  - 28
PB  - Wiley-VCH
CY  - Weinheim
ER  -