TY - THES A1 - Schick, Daniel T1 - Ultrafast lattice dynamics in photoexcited nanostructures : femtosecond X-ray diffraction with optimized evaluation schemes T1 - Ultraschnelle Gitterdynamik in optisch angeregten Nanostrukturen : Femtosekunden-Röntgendiffraktion mit optimierten Auswerteroutinen N2 - Within the course of this thesis, I have investigated the complex interplay between electron and lattice dynamics in nanostructures of perovskite oxides. Femtosecond hard X-ray pulses were utilized to probe the evolution of atomic rearrangement directly, which is driven by ultrafast optical excitation of electrons. The physics of complex materials with a large number of degrees of freedom can be interpreted once the exact fingerprint of ultrafast lattice dynamics in time-resolved X-ray diffraction experiments for a simple model system is well known. The motion of atoms in a crystal can be probed directly and in real-time by femtosecond pulses of hard X-ray radiation in a pump-probe scheme. In order to provide such ultrashort X-ray pulses, I have built up a laser-driven plasma X-ray source. The setup was extended by a stable goniometer, a two-dimensional X-ray detector and a cryogen-free cryostat. The data acquisition routines of the diffractometer for these ultrafast X-ray diffraction experiments were further improved in terms of signal-to-noise ratio and angular resolution. The implementation of a high-speed reciprocal-space mapping technique allowed for a two-dimensional structural analysis with femtosecond temporal resolution. I have studied the ultrafast lattice dynamics, namely the excitation and propagation of coherent phonons, in photoexcited thin films and superlattice structures of the metallic perovskite SrRuO3. Due to the quasi-instantaneous coupling of the lattice to the optically excited electrons in this material a spatially and temporally well-defined thermal stress profile is generated in SrRuO3. This enables understanding the effect of the resulting coherent lattice dynamics in time-resolved X-ray diffraction data in great detail, e.g. the appearance of a transient Bragg peak splitting in both thin films and superlattice structures of SrRuO3. In addition, a comprehensive simulation toolbox to calculate the ultrafast lattice dynamics and the resulting X-ray diffraction response in photoexcited one-dimensional crystalline structures was developed in this thesis work. With the powerful experimental and theoretical framework at hand, I have studied the excitation and propagation of coherent phonons in more complex material systems. In particular, I have revealed strongly localized charge carriers after above-bandgap femtosecond photoexcitation of the prototypical multiferroic BiFeO3, which are the origin of a quasi-instantaneous and spatially inhomogeneous stress that drives coherent phonons in a thin film of the multiferroic. In a structurally imperfect thin film of the ferroelectric Pb(Zr0.2Ti0.8)O3, the ultrafast reciprocal-space mapping technique was applied to follow a purely strain-induced change of mosaicity on a picosecond time scale. These results point to a strong coupling of in- and out-of-plane atomic motion exclusively mediated by structural defects. N2 - Im Rahmen dieser Arbeit habe ich mich mit den komplexen Wechselwirkungen zwischen Elektronen- und Gitterdynamik in oxidischen Perowskit-Nanostrukturen beschäftigt. Dazu wurden verschiedene Proben mit intensiven, ultrakurzen Laserpulsen angeregt. Um die zeitliche Entwicklung der induzierten atomaren Umordnung zu untersuchen, wurden Femtosekunden-Pulse harter Röntgenstrahlung genutzt. Zunächst wurde die ultraschnelle Gitterdynamik in einfachen Modellsystemen mit zeitaufgelösten Röntgendiffraktionsexperimenten untersucht, um im Anschluss ähnliche Experimente an komplexeren Materialien mit mehreren Freiheitsgraden interpretieren zu können. Die Bewegung der Atome in einem Kristall kann über Anrege-Abtast-Verfahren direkt mit gepulster, harter Röntgenstrahlung gemessen werden. Die Dauer der Röntgenpulse muss dafür einige hundert Femtosekunden kurz sein. Um diese ultrakurzen Röntgenpulse zu erzeugen, habe ich eine lasergetriebene Plasma-Röntgenquelle aufgebaut. Der Aufbau wurde um ein stabiles Goniometer, einen zweidimensionalen Röntgendetektor und einen kryogenfreien Kryostat erweitert und in Bezug auf das Signal-zu-Rausch-Verhältnis und die Winkelauflösung optimiert. Durch die Entwicklung einer schnellen Methode zur Vermessung des reziproken Raums konnte erstmals an solch einer Quelle eine zweidimensionale Strukturanalyse mit Femtosekunden-Zeitauflösung realisiert werden. Die Anregung und Ausbreitung von kohärenten Phononen habe ich in optisch angeregten Dünnfilm- und Übergitterstrukturen untersucht. Eine entscheidende Rolle spielen dabei metallische SrRuO3 Schichten. Durch die quasi-instantane Kopplung des Gitters an die optisch angeregten Elektronen in SrRuO3 wird ein räumlich und zeitlich wohldefiniertes Druckprofil erzeugt. Dadurch kann der Einfluss der resultierenden kohärenten Gitterdynamik auf die zeitaufgelösten Röntgendiffraktionsdaten im Detail verstanden werden. Beobachtet wurde z.B. das Auftreten einer transienten Aufspaltung eines Bragg-Reflexes bei Dünnfilm- und Übergitterstrukturen aus SrRuO3. Außerdem wurde eine umfangreiche Simulationsumgebung entwickelt, mit deren Hilfe die ultraschnelle Dynamik und die dazugehörigen Röntgendiffraktionssignale in optisch angeregten eindimensionalen Kristallstrukturen berechnet werden können. Der von mir entwickelte experimentelle Aufbau sowie das Simulationspaket zur Datenanalyse und -interpretation wurden anschließend für die Untersuchung kohärenter Phononen in komplexeren Materialsystemen eingesetzt. Im Speziellen konnte ich in multiferroischem BiFeO3 eine stark lokalisierte Ladungsträgerverteilung nach einer optischen Femtosekunden-Anregung nachweisen. Sie ist die Ursache für einen quasi-instantanen und räumlich inhomogenen Druck, der die kohärenten Phononen in einem dünnen Film dieses Multiferroikums erzeugt. Außerdem habe ich die ultraschnelle Vermessung des reziproken Raums angewendet, um eine verzerrungsinduzierte Veränderung der Mosaizität in einem strukturell unvollkommenen Film aus ferroelektrischem Pb(Zr0.2Ti0.8)O3 zu verfolgen. Die Ergebnisse deuten auf eine ausschließlich durch strukturelle Defekte vermittelte Kopplung der atomaren Bewegungen parallel und senkrecht zur Flächennormalen des Filmes hin. KW - ultraschnelle Röntgendiffraktion KW - Gitterdynamik KW - Nanostruktur KW - optische Anregung KW - Perowskit KW - ultrafast X-ray diffraction KW - lattice dynamics KW - nanostructure KW - photoexcitation KW - perovskite Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68827 ER - TY - THES A1 - Caprioglio, Pietro T1 - Non-radiative recombination losses in perovskite solar cells BT - from fundamental understanding to high efficiency devices BT - vom grundlegenden Verständnis zu hocheffizienten Bauteilen N2 - In the last decade the photovoltaic research has been preponderantly overturned by the arrival of metal halide perovskites. The introduction of this class of materials in the academic research for renewable energy literally shifted the focus of a large number of research groups and institutions. The attractiveness of halide perovskites lays particularly on their skyrocketing efficiencies and relatively simple and cheap fabrication methods. Specifically, the latter allowed for a quick development of this research in many universities and institutes around the world at the same time. The outcome has been a fast and beneficial increase in knowledge with a consequent terrific improvement of this new technology. On the other side, the enormous amount of research promoted an immense outgrowth of scientific literature, perpetually published. Halide perovskite solar cells are now effectively competing with other established photovoltaic technologies in terms of power conversion efficiencies and production costs. Despite the tremendous improvement, a thorough understanding of the energy losses in these systems is of imperative importance to unlock the full thermodynamic potential of this material. This thesis focuses on the understanding of the non-radiative recombination processes in the neat perovskite and in complete devices. Specifically, photoluminescence quantum yield (PLQY) measurements were applied to multilayer stacks and cells under different illumination conditions to accurately determine the quasi-Fermi levels splitting (QFLS) in the absorber, and compare it with the external open-circuit voltage of the device (V_OC). Combined with drift-diffusion simulations, this approach allowed us to pinpoint the sites of predominant recombination, but also to investigate the dynamics of the underlying processes. As such, the internal and external ideality factors, associated to the QFLS and V_OC respectively, are studied with the aim of understanding the type of recombination processes taking place in the multilayered architecture of the device. Our findings highlight the failure of the equality between QFLS and V_OC in the case of strong interface recombination, as well as the detrimental effect of all commonly used transport layers in terms of V_OC losses. In these regards, we show how, in most perovskite solar cells, different recombination processes can affect the internal QFLS and the external V_OC and that interface recombination dictates the V_OC losses. This line of arguments allowed to rationalize that, in our devices, the external ideality factor is completely dominated by interface recombination, and that this process can alone be responsible for values of the ideality factor between 1 and 2, typically observed in perovskite solar cells. Importantly, our studies demonstrated how strong interface recombination can lower the ideality factor towards values of 1, often misinterpreted as pure radiative second order recombination. As such, a comprehensive understanding of the recombination loss mechanisms currently limiting the device performance was achieved. In order to reach the full thermodynamic potential of the perovskite absorber, the interfaces of both the electron and hole transport layers (ETL/HTL) must be properly addressed and improved. From here, the second part of the research work is devoted on reducing the interfacial non-radiative energy losses by optimizing the structure and energetics of the relevant interface in our solar cell devices, with the aim of bringing their quasi-Fermi level splitting closer to its radiative limit. As such, the interfaces have been carefully addressed and optimized with different methodologies. First, a small amount of Sr is added into the perovskite precursor solution with the effect of effectively reducing surface and interface recombination. In this case, devices with V_OC up to 1.23 V were achieved and the energy losses were minimized to as low as 100 meV from the radiative limit of the material. Through a combination of different methods, we showed that these improvements are related to a strong n-type surface doping, which repels the holes in the perovskite from the surface and the interface with the ETL. Second, a more general device improvement was achieved by depositing a defect-passivating poly(ionic-liquid) layer on top of the perovskite absorber. The resulting devices featured a concomitant improvement of the V_OC and fill factor, up to 1.17 V and 83% respectively, reaching efficiency as high as 21.4%. Moreover, the protecting polymer layer helped to enhance the stability of the devices under prolonged maximum power point tracking measurements. Lastly, PLQY measurements are used to investigate the recombination mechanisms in halide-segregated large bandgap perovskite materials. Here, our findings showed how few iodide-rich low-energy domains act as highly efficient radiative recombination centers, capable of generating PLQY values up to 25%. Coupling these results with a detailed microscopic cathodoluminescence analysis and absorption profiles allowed to demonstrate how the emission from these low energy domains is due to the trapping of the carriers photogenerated in the Br-rich high-energy domains. Thereby, the strong implications of this phenomenon are discussed in relation to the failure of the optical reciprocity between absorption and emission and on the consequent applicability of the Shockley-Queisser theory for studying the energy losses such systems. In conclusion, the identification and quantification of the non-radiative QFLS and V_OC losses provided a base knowledge of the fundamental limitation of perovskite solar cells and served as guidance for future optimization and development of this technology. Furthermore, by providing practical examples of solar cell improvements, we corroborated the correctness of our fundamental understanding and proposed new methodologies to be further explored by new generations of scientists. N2 - In den letzten zehn Jahren hat sich die Photovoltaikforschung durch das Aufkommen von metallhalogeniden Perowskiten grundlegend geändert. Die Einführung dieser Materialklasse in der Forschung für erneuerbare Energien hat eine Neuorientierung einer großen Anzahl von Forschungsgruppen eingeleitet. Die Attraktivität von metallhalogeniden Perowskiten beruht insbesondere auf ihren hohen photovoltaischen Wirkungsgraden sowie ihren einfachen und billigen Herstellungsverfahren. Letzteres ermöglichte letztendlich auch die schnelle Entwicklung der Perowskit Photovoltaik an vielen Universitäten und Instituten weltweit. Die universitäre Forschung führte außerdem zu einem verbesserten Verständnis der Limitierungen der Solarzellen was zu einer weiteren Verbesserung der Technologie betrug. Auf der anderen Seite führte die intensive Forschung zu einem immensen Wachstum der wissenschaftlichen Publikationen. Halogenid-Perowskit-Solarzellen konkurrieren heute effektiv mit anderen etablierten Photovoltaik-Technologien hinsichtlich ihres Wirkungsgrades und der Produktionskosten. Trotz der der enormen Effizienzsteigerung ist ein gründliches Verständnis der Energieverluste in diesen Systemen von entscheidender Bedeutung, um das volle thermodynamische Potenzial dieses Materials auszuschöpfen. Diese Arbeit konzentriert sich auf das Verständnis nichtstrahlender Rekombinationsprozesse in den reinen Perowskitschichten und in vollständigen Solarzellen. Insbesondere wurden Messungen der Photolumineszenzquantenausbeute (PLQY) an Mehrschichtstapel und Zellen unter verschiedenen Beleuchtungsbedingungen durchgeführt, um die Quasi-Fermi-Niveau-Aufspaltung (QFLS) in der aktiven Schicht genau zu bestimmen und sie mit der externen Leerlaufspannung (VOC) der Bauteile zu vergleichen. In Kombination mit Drift-diffusions-Simulationen konnten wir mit diesem Ansatz die Stellen der vorherrschenden Rekombination in den Bauteilen lokalisieren, aber auch die Dynamik der zugrunde liegenden Prozesse untersuchen. In weiterer Folge wurden die internen und externen Idealitätsfaktoren, die mit dem QFLS bzw. VOC verbunden sind, untersucht, um die Art der Rekombinationsprozesse zu verstehen, die in Multischicht-Solarzellen stattfinden. Unsere Ergebnisse zeigten, dass das QFLS und der VOC bei starker Grenzflächenrekombination nicht gleich sind, sowie den nachteiligen Effekt aller häufig verwendeten Transportschichten in Bezug auf VOC-Verluste. In diesem Zusammenhang zeigten wir, wie in den meisten Perowskit-Solarzellen unterschiedliche Rekombinationsprozesse das interne QFLS und das externe VOC beeinflussen können und dass die Grenzflächenrekombination die VOC-Verluste dominiert. Diese Argumentation erlaubte es uns außerdem klären, warum in den Bauteilen der externe Idealitätsfaktor vollständig von der Grenzflächenrekombination dominiert wird und dass dieser Prozess allein für Werte des Idealitätsfaktors zwischen 1 und 2 verantwortlich sein kann, die typischerweise in Perowskit-Solarzellen beobachtet werden. Insbesondere zeigten unsere Studien, wie eine starke Grenzflächenrekombination den Idealitätsfaktor auf Werte von 1 senken kann, was häufig als reine strahlende Rekombination zweiter Ordnung misinterpretiert wird. Diese Studien ermöglichten uns daher ein umfassendes Verständnis der Rekombinationsverlustmechanismen, die derzeit den Wirkungsgrad limitieren. Um das volle thermodynamische Potential der Perowskit-Absorberschicht zu erreichen, müssen die Grenzflächen der Elektron- als auch der Lochtransportschicht (ETL/HTL) richtig adressiert und verbessert werden. Ausgehend davon, befasst sich der zweite Teil der Forschungsarbeit mit der Reduzierung der nichtstrahlenden Energieverluste an der Grenzfläche durch Optimierung der Struktur und Energetik der relevanten Grenzflächen in den Solarzellen, um deren Quasi-Fermi-Niveau-Aufspaltung näher ans strahlende Limit zu bringen. Daher wurden die Grenzflächen sorgfältig untersucht und mit unterschiedlichen Methoden optimiert. Zunächst wird der Perowskit-Lösung eine kleine Menge Strontium (Sr) zugesetzt, um die Oberflächen- und Grenzflächenrekombination effektiv zu reduzieren. In diesem Fall wurden Bauteile mit Leerlaufspannungen bis zu 1.23 V erreicht und die Energieverluste auf nur 100 meV bezüglich des strahlenden Limits des Materials reduziert. Durch eine Kombination unterschiedlicher Methoden haben wir in weiterer Folge gezeigt, dass diese Verbesserungen mit einer starken Oberflächendotierung vom n-Typ zusammenhängen, die die Löcher im Perowskit von der Oberfläche und der Grenzfläche zur ETL abstößt. Außerdem wurde eine allgemeinere Verbesserung der Bauteile erreicht, indem eine defektpassivierende Poly(ionische) Flüssigkeit auf dem Perowskit-Absorber abgeschieden wurde. Die resultierenden Solarzellen zeigten eine gleichzeitige Verbesserung des VOC und des Füllfaktors von 1.17 V bzw. 83% und erreichten einen Wirkungsgrad von bis zu 21.4%. Darüber hinaus trug die schützende Polymerschicht dazu bei, die Stabilität der Bauteile bei längeren Messungen am maximalen Leistungspunkts zu verbessern. In einer weiteren Studie wurden PLQY-Messungen verwendet, um die Rekombinationsmechanismen in Halogenid-getrennten Perowskit-Materialien mit großer Bandlücke zu untersuchen. Hier zeigten unsere Ergebnisse, wie wenige jodreiche Domänen mit vergleichsweise kleiner Bandlücke als hocheffiziente Strahlungsrekombinationszentren fungieren können, die zu PLQY-Werte von bis zu 25% führen können. Durch die Kopplung dieser Ergebnisse mit einer detaillierten mikroskopischen Kathodolumineszenzanalyse und Absorptionsprofilen konnte gezeigt werden, wie die Emission aus den jodreichen Niedrigenergiedomänen auf das Einfangen von photogenerierten Ladungsträgern in den Bromid-reichen Domänen mit hoher Bandlücke zurückzuführen ist. Dabei wurden die starken Auswirkungen dieses Phänomens in Bezug auf das Versagen der optischen Reziprozität zwischen Absorption und Emission und die daraus resultierende Anwendbarkeit der Shockley-Queisser-Theorie zur Untersuchung der Energieverluste solcher Systeme diskutiert. Zusammenfassend lieferte die Identifizierung und Quantifizierung der nichtstrahlenden QFLS und VOC-Verluste ein grundlegendes Verständnis der grundlegenden Limitierungen von Perowskit-Solarzellen und dient als Leitfaden für die zukünftige Optimierung und Entwicklung dieser Technologie. Darüber hinaus haben wir anhand praktischer Beispiele konkrete Verbesserungen von Solarzellen aufgezeigt, die die Richtigkeit unserer Schlussfolgerungen bestätigten sowie neue Methoden vorgeschlagen, die von einer neuen Generationen von Wissenschaftlern weiter untersucht werden können. T2 - Nichtstrahlende Rekombinationsverluste in Perowskit-Solarzellen KW - perovskite KW - solar cells KW - Perowskit KW - Solarzellen KW - Photovoltaik Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-477630 ER - TY - THES A1 - Kegelmann, Lukas T1 - Advancing charge selective contacts for efficient monolithic perovskite-silicon tandem solar cells T1 - Entwicklung Ladungsselektiver Kontakte für Effiziente Monolithische Perowskit-Silizium Tandem-Solarzellen N2 - Hybrid organic-inorganic perovskites are one of the most promising material classes for photovoltaic energy conversion. In solar cells, the perovskite absorber is sandwiched between n- and p-type contact layers which selectively transport electrons and holes to the cell’s cathode and anode, respectively. This thesis aims to advance contact layers in perovskite solar cells and unravel the impact of interface and contact properties on the device performance. Further, the contact materials are applied in monolithic perovskite-silicon heterojunction (SHJ) tandem solar cells, which can overcome the single junction efficiency limits and attract increasing attention. Therefore, all contact layers must be highly transparent to foster light harvesting in the tandem solar cell design. Besides, the SHJ device restricts processing temperatures for the selective contacts to below 200°C. A comparative study of various electron selective contact materials, all processed below 180°C, in n-i-p type perovskite solar cells highlights that selective contacts and their interfaces to the absorber govern the overall device performance. Combining fullerenes and metal-oxides in a TiO2/PC60BM (phenyl-C60-butyric acid methyl ester) double-layer contact allows to merge good charge extraction with minimized interface recombination. The layer sequence thereby achieved high stabilized solar cell performances up to 18.0% and negligible current-voltage hysteresis, an otherwise pronounced phenomenon in this device design. Double-layer structures are therefore emphasized as a general concept to establish efficient and highly selective contacts. Based on this success, the concept to combine desired properties of different materials is transferred to the p-type contact. Here, a mixture of the small molecule Spiro-OMeTAD [2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)-9,9’-spirobifluoren] and the doped polymer PEDOT [poly(3,4-ethylenedioxythiophene)] is presented as a novel hole selective contact. PEDOT thereby remarkably suppresses charge recombination at the perovskite surface, allowing an increase of quasi-Fermi level splitting in the absorber. Further, the addition of Spiro-OMeTAD into the PEDOT layer is shown to enhance charge extraction at the interface and allow high efficiencies up to 16.8%. Finally, the knowledge on contact properties is applied to monolithic perovskite-SHJ tandem solar cells. The main goal is to optimize the top contact stack of doped Spiro-OMeTAD/molybdenum oxide(MoOx)/ITO towards higher transparency by two different routes. First, fine-tuning of the ITO deposition to mitigate chemical reduction of MoOx and increase the transmittance of MoOx/ITO stacks by 25%. Second, replacing Spiro-OMeTAD with the alternative hole transport materials PEDOT/Spiro-OMeTAD mixtures, CuSCN or PTAA [poly(triaryl amine)]. Experimental results determine layer thickness constrains and validate optical simulations, which subsequently allow to realistically estimate the respective tandem device performances. As a result, PTAA represents the most promising replacement for Spiro-OMeTAD, with a projected increase of the optimum tandem device efficiency for the herein used architecture by 2.9% relative to 26.5% absolute. The results also reveal general guidelines for further performance gains of the technology. N2 - Hybride, organisch-anorganische Perowskite gelten als eine der vielversprechendsten Materialklassen für die photovoltaische Energieumwandlung. Dazu werden Perowskit-Absorber in Solarzellen zwischen n- und p-Typ Kontaktschichten angeordnet, die Elektronen oder Löcher selektiv zur Kathode bzw. Anode der Zelle transportieren. Ziel dieser Arbeit ist es, die ladungsselektiven Transportschichten in Perowskit-Solarzellen zu verbessern und Einflüsse der Grenzflächen- und Kontakteigenschaften auf die Zelleffizienz herauszustellen. Darüber hinaus werden die selektiven Schichten in monolithischen Perowskit-Silizium-Heterokontakt (SHK) Tandem-Solarzellen eingesetzt. Diese können höhere Wirkungsgrade als Einfachsolarzellen erzielen und erfahren zunehmende Aufmerksamkeit aus der Forschung. Hierfür müssen alle Kontaktschichten hochtransparent sein, um eine möglichst effiziente Lichtausnutzung im Tandem-Solarzellen-Design zu erzielen. Des Weiteren limitiert die SHK-Solarzelle die höchst mögliche Temperatur zur Abscheidung der selektiven Kontakte auf 200°C. In einer Vergleichsstudie werden deshalb zunächst verschiedene elektronenselektive Kontaktmaterialien, die alle unter 180°C prozessiert werden, in n-i-p-Typ Perowskit-Solarzellen eingesetzt. Es zeigt sich hierbei, wie wesentlich die selektiven Kontakte und ihre Grenzflächen zum Absorber die Effizienz der Solarzellen bestimmen. Eine Kombination aus Fulleren und Metalloxid in einem TiO2/PC60BM (Phenyl-C60-Buttersäuremethylester) Doppelschichtkontakt ermöglicht dabei eine besonders gute Ladungsextraktion und stark reduzierte Grenzflächenrekombination. Die Materialzusammenstellung erreicht in der Studie hohe stabilisierte Solarzellenwirkungsgrade bis zu 18,0% und eine vernachlässigbare Strom-Spannungs-Hysterese, ein üblicherweise ausgeprägtes Phänomen in diesem Zellaufbau. Das Ergebnis stellt Doppelschicht-Strukturen als generelles Konzept zur Herstellung effizienter und hochselektiver Kontakte heraus. Basierend auf diesem Erfolg wird das Konzept, Eigenschaften verschiedener Materialien miteinander zu kombinieren, anschließend auf den p-Typ Kontakt übertragen. Dazu wird ein neuartiger lochselektiver Kontakt vorgestellt, bestehend aus einer Mischung des kleinen Moleküls Spiro-OMeTAD [2,2‘7,7‘-tetrakis(N,N-di-p-methoxyphenylamin)-9,9‘-spirobifluoren] und dem dotierten Polymer PEDOT [poly(3,4-ethylendioxythiophen)]. PEDOT unterdrückt dabei bemerkenswerter Weiße die Ladungsträgerrekombination an der Perowskit-Grenzfläche, wodurch eine Erhöhung der Quasi-Fermi-Niveau-Aufspaltung im Absorber erzielt wird. Weiterhin wird gezeigt, dass die Zugabe von Spiro-OMeTAD in die PEDOT-Schicht die Lochextraktion an der Grenzfläche verbessert und folglich hohe Solarzellenwirkungsgrade von bis zu 16,8% ermöglicht. Schließlich wird das gewonnene Wissen über die Bedeutung der Kontakt- und Grenzflächeneigenschaften auf monolithische Perowskit-SHK-Tandemsolarzellen angewandt. Das Hauptziel dabei ist die Optimierung des oberen Kontaktstapels, bestehend aus dotiertem Spiro-OMeTAD/Molybdän Oxid (MoOx)/ITO, hin zu verbesserter Transparenz. Zwei verschiedene Ansätze werden hierzu verfolgt. Erstens, durch Feinanpassung der ITO-Abscheidung kann eine chemische Reduktion von MoOx verringert und die Transmission von MoOx/ITO-Schichtstapeln um 25% erhöht werden. Zweitens: Durch Ersetzen des Spiro-OMeTAD mit alternativen, transparenteren Lochtransportmaterialien sollen parasitäre Absorptionsverluste vermieden werden. Als potentielle Lochkontakte werden dabei PEDOT/Spiro-OMeTAD-Mischungen, CuSCN und PTAA [Poly(triarylamin)] analysiert. Experimentelle Untersuchungen liefern optimierte Dicken der Lochkontakt und MoOx Schichten und dienen der Validierung optischer Simulationen der Schichtstapel. Dies erlaubt im Folgenden eine realistische Abschätzung der maximal erreichbaren Tandemsolarzelleneffizienzen. Dabei stellt PTAA den vielversprechendsten Ersatz für Spiro-OMeTAD dar, mit einer prognostizierten Erhöhung des erreichbaren Tandem-Solarzellenwirkungsgrad um 2,9% relativ auf 26,5% absolut. Die Ergebnisse stellen zudem einen Leitfaden zur weiteren Effizienzsteigerung der Tandemsolarzellen-Technologie dar. KW - perovskite KW - silicon KW - tandem solar cell KW - interface engineering KW - contact layers KW - Perowskit KW - Silizium KW - Tandem-Solarzelle KW - Interface-Engineering KW - Kontaktschichten Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426428 ER - TY - JOUR A1 - Lai, Huagui A1 - Luo, Jincheng A1 - Zwirner, Yannick A1 - Olthof, Selina A1 - Wieczorek, Alexander A1 - Ye, Fangyuan A1 - Jeangros, Quentin A1 - Yin, Xinxing A1 - Akhundova, Fatima A1 - Ma, Tianshu A1 - He, Rui A1 - Kothandaraman, Radha K. A1 - Chin, Xinyu A1 - Gilshtein, Evgeniia A1 - Muller, Andre A1 - Wang, Changlei A1 - Thiesbrummel, Jarla A1 - Siol, Sebastian A1 - Prieto, Jose Marquez A1 - Unold, Thomas A1 - Stolterfoht, Martin A1 - Chen, Cong A1 - Tiwari, Ayodhya N. A1 - Zhao, Dewei A1 - Fu, Fan T1 - High-performance flexible all-Perovskite tandem solar cells with reduced V-OC-deficit in wide-bandgap subcell JF - Advanced energy materials N2 - Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and lightweight substrates with a very high power-to-weight ratio. However, the efficiency of flexible all-perovskite tandems is lagging far behind their rigid counterparts primarily due to the challenges in developing efficient wide-bandgap (WBG) perovskite solar cells on the flexible substrates as well as their low open-circuit voltage (V-OC). Here, it is reported that the use of self-assembled monolayers as hole-selective contact effectively suppresses the interfacial recombination and allows the subsequent uniform growth of a 1.77 eV WBG perovskite with superior optoelectronic quality. In addition, a postdeposition treatment with 2-thiopheneethylammonium chloride is employed to further suppress the bulk and interfacial recombination, boosting the V-OC of the WBG top cell to 1.29 V. Based on this, the first proof-of-concept four-terminal all-perovskite flexible TSC with a power conversion efficiency of 22.6% is presented. When integrating into two-terminal flexible tandems, 23.8% flexible all-perovskite TSCs with a superior V-OC of 2.1 V is achieved, which is on par with the V-OC reported on the 28% all-perovskite tandems grown on the rigid substrate. KW - all-perovskite tandems KW - flexible tandem solar cells KW - perovskite KW - V OC-deficit KW - wide-bandgap Y1 - 2022 U6 - https://doi.org/10.1002/aenm.202202438 SN - 1614-6832 SN - 1614-6840 VL - 12 IS - 45 PB - Wiley-VCH CY - Weinheim ER -