TY - JOUR A1 - Liang, Feng A1 - Liu, Yunzhen A1 - Liu, Hai A1 - Ma, Shilong A1 - Schnor, Bettina T1 - A Parallel Job Execution Time Estimation Approach Based on User Submission Patterns within Computational Grids JF - International journal of parallel programming N2 - Scheduling performance in computational grid can potentially benefit a lot from accurate execution time estimation for parallel jobs. Most existing approaches for the parallel job execution time estimation, however, require ample past job traces and the explicit correlations between the job execution time and the outer layout parameters such as the consumed processor numbers, the user-estimated execution time and the job ID, which are hard to obtain or reveal. This paper presents and evaluates a novel execution time estimation approach for parallel jobs, the user-behavior clustering for execution time estimation, which can give more accurate execution time estimation for parallel jobs through exploring the job similarity and revealing the user submission patterns. Experiment results show that compared to the state-of-art algorithms, our approach can improve the accuracy of the job execution time estimation up to 5.6 %, meanwhile the time that our approach spends on calculation can be reduced up to 3.8 %. KW - User submission pattern KW - Parallel job execution time estimation KW - Computational grid Y1 - 2015 U6 - https://doi.org/10.1007/s10766-013-0294-1 SN - 0885-7458 SN - 1573-7640 VL - 43 IS - 3 SP - 440 EP - 454 PB - Springer CY - New York ER - TY - JOUR A1 - Gössel, Michael A1 - Sogomonyan, Egor S. T1 - A parity-preserving multi-input signature analyzer and it application for concurrent checking and BIST Y1 - 1996 ER - TY - JOUR A1 - Pearce, David A1 - Sarsakov, Vladimir A1 - Schaub, Torsten H. A1 - Tompits, Hans A1 - Woltran, Stefan T1 - A polynomial translation of logic programs with nested expressions into disjunctive logic programs Y1 - 2002 SN - 3-540-43930-7 ER - TY - JOUR A1 - Pearce, David A1 - Sarsakov, Vladimir A1 - Schaub, Torsten H. A1 - Tompits, Hans A1 - Woltran, Stefan T1 - A polynomial translation of logic programs with nested expressions into disjunctive logic programs : preliminary report Y1 - 2002 ER - TY - JOUR A1 - Delgrande, James Patrick A1 - Schaub, Torsten H. A1 - Tompits, Hans T1 - A preference-based framework for updating logic programs Y1 - 2007 SN - 978-3-540- 72199-4 ER - TY - JOUR A1 - Delgrande, James Patrick A1 - Schaub, Torsten H. A1 - Tompits, Hans T1 - A Preference-Based Framework for Updating logic Programs : preliminary reports Y1 - 2006 UR - http://www.easychair.org/FLoC-06/PREFS-preproceedings.pdf ER - TY - BOOK A1 - Polyvyanyy, Artem A1 - Kuropka, Dominik T1 - A Quantitative Evalution of the Enhanced Topic-based Vector Space Model T3 - Technische Berichte des Hasso-Plattner-Instituts für Softwaresystemtechnik an der Universität Potsda Y1 - 2007 SN - 978-3-939469-95-7 SN - 1613-5652 VL - 19 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Müller, Jürgen J. T1 - A real-time in-memory discovery service Y1 - 2012 CY - Potsdam ER - TY - JOUR A1 - Börner, Ferdinand T1 - A remark on the finite lattice representation problem Y1 - 1998 ER - TY - JOUR A1 - Schöbel, Michael T1 - A runtime environment for online processing of operating system kernel events Y1 - 2010 SN - 978-3-86956-036-6 ER - TY - JOUR A1 - Sogomonyan, Egor S. A1 - Singh, Adit D. A1 - Gössel, Michael T1 - A scan based concrrent BIST approach for low cost on-line testing Y1 - 1998 ER - TY - THES A1 - Chen, Junchao T1 - A self-adaptive resilient method for implementing and managing the high-reliability processing system T1 - Eine selbstadaptive belastbare Methode zum Implementieren und Verwalten von hochzuverlässigen Verarbeitungssysteme N2 - As a result of CMOS scaling, radiation-induced Single-Event Effects (SEEs) in electronic circuits became a critical reliability issue for modern Integrated Circuits (ICs) operating under harsh radiation conditions. SEEs can be triggered in combinational or sequential logic by the impact of high-energy particles, leading to destructive or non-destructive faults, resulting in data corruption or even system failure. Typically, the SEE mitigation methods are deployed statically in processing architectures based on the worst-case radiation conditions, which is most of the time unnecessary and results in a resource overhead. Moreover, the space radiation conditions are dynamically changing, especially during Solar Particle Events (SPEs). The intensity of space radiation can differ over five orders of magnitude within a few hours or days, resulting in several orders of magnitude fault probability variation in ICs during SPEs. This thesis introduces a comprehensive approach for designing a self-adaptive fault resilient multiprocessing system to overcome the static mitigation overhead issue. This work mainly addresses the following topics: (1) Design of on-chip radiation particle monitor for real-time radiation environment detection, (2) Investigation of space environment predictor, as support for solar particle events forecast, (3) Dynamic mode configuration in the resilient multiprocessing system. Therefore, according to detected and predicted in-flight space radiation conditions, the target system can be configured to use no mitigation or low-overhead mitigation during non-critical periods of time. The redundant resources can be used to improve system performance or save power. On the other hand, during increased radiation activity periods, such as SPEs, the mitigation methods can be dynamically configured appropriately depending on the real-time space radiation environment, resulting in higher system reliability. Thus, a dynamic trade-off in the target system between reliability, performance and power consumption in real-time can be achieved. All results of this work are evaluated in a highly reliable quad-core multiprocessing system that allows the self-adaptive setting of optimal radiation mitigation mechanisms during run-time. Proposed methods can serve as a basis for establishing a comprehensive self-adaptive resilient system design process. Successful implementation of the proposed design in the quad-core multiprocessor shows its application perspective also in the other designs. N2 - Infolge der CMOS-Skalierung wurden strahleninduzierte Einzelereignis-Effekte (SEEs) in elektronischen Schaltungen zu einem kritischen Zuverlässigkeitsproblem für moderne integrierte Schaltungen (ICs), die unter rauen Strahlungsbedingungen arbeiten. SEEs können in der kombinatorischen oder sequentiellen Logik durch den Aufprall hochenergetischer Teilchen ausgelöst werden, was zu destruktiven oder nicht-destruktiven Fehlern und damit zu Datenverfälschungen oder sogar Systemausfällen führt. Normalerweise werden die Methoden zur Abschwächung von SEEs statisch in Verarbeitungsarchitekturen auf der Grundlage der ungünstigsten Strahlungsbedingungen eingesetzt, was in den meisten Fällen unnötig ist und zu einem Ressourcen-Overhead führt. Darüber hinaus ändern sich die Strahlungsbedingungen im Weltraum dynamisch, insbesondere während Solar Particle Events (SPEs). Die Intensität der Weltraumstrahlung kann sich innerhalb weniger Stunden oder Tage um mehr als fünf Größenordnungen ändern, was zu einer Variation der Fehlerwahrscheinlichkeit in ICs während SPEs um mehrere Größenordnungen führt. In dieser Arbeit wird ein umfassender Ansatz für den Entwurf eines selbstanpassenden, fehlerresistenten Multiprozessorsystems vorgestellt, um das Problem des statischen Mitigation-Overheads zu überwinden. Diese Arbeit befasst sich hauptsächlich mit den folgenden Themen: (1) Entwurf eines On-Chip-Strahlungsteilchen Monitors zur Echtzeit-Erkennung von Strahlung Umgebungen, (2) Untersuchung von Weltraumumgebungsprognosen zur Unterstützung der Vorhersage von solaren Teilchen Ereignissen, (3) Konfiguration des dynamischen Modus in einem belastbaren Multiprozessorsystem. Daher kann das Zielsystem je nach den erkannten und vorhergesagten Strahlungsbedingungen während des Fluges so konfiguriert werden, dass es während unkritischer Zeiträume keine oder nur eine geringe Strahlungsminderung vornimmt. Die redundanten Ressourcen können genutzt werden, um die Systemleistung zu verbessern oder Energie zu sparen. In Zeiten erhöhter Strahlungsaktivität, wie z. B. während SPEs, können die Abschwächungsmethoden dynamisch und in Abhängigkeit von der Echtzeit-Strahlungsumgebung im Weltraum konfiguriert werden, was zu einer höheren Systemzuverlässigkeit führt. Auf diese Weise kann im Zielsystem ein dynamischer Kompromiss zwischen Zuverlässigkeit, Leistung und Stromverbrauch in Echtzeit erreicht werden. Alle Ergebnisse dieser Arbeit wurden in einem hochzuverlässigen Quad-Core-Multiprozessorsystem evaluiert, das die selbstanpassende Einstellung optimaler Strahlungsschutzmechanismen während der Laufzeit ermöglicht. Die vorgeschlagenen Methoden können als Grundlage für die Entwicklung eines umfassenden, selbstanpassenden und belastbaren Systementwurfsprozesses dienen. Die erfolgreiche Implementierung des vorgeschlagenen Entwurfs in einem Quad-Core-Multiprozessor zeigt, dass er auch für andere Entwürfe geeignet ist. KW - single event upset KW - solar particle event KW - machine learning KW - self-adaptive multiprocessing system KW - maschinelles Lernen KW - selbstanpassendes Multiprozessorsystem KW - strahleninduzierte Einzelereignis-Effekte KW - Sonnenteilchen-Ereignis Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-583139 ER - TY - JOUR A1 - Schaub, Torsten H. A1 - Wang, Kewen T1 - A semantic framework for prefernce handling in answer set programming Y1 - 2003 ER - TY - JOUR A1 - Goessel, Michael A1 - Chakrabarty, Krishnendu A1 - Ocheretnij, V. A1 - Leininger, Andreas T1 - A signature analysis technique for the identification of failing vectors with application to Scan-BIST N2 - We present a new technique for uniquely identifying a single failing vector in an interval of test vectors. This technique is applicable to combinational circuits and for scan-BIST in sequential circuits with multiple scan chains. The proposed method relies on the linearity properties of the MISR and on the use of two test sequences, which are both applied to the circuit under test. The second test sequence is derived from the first in a straightforward manner and the same test pattern source is used for both test sequences. If an interval contains only a single failing vector, the algebraic analysis is guaranteed to identify it. We also show analytically that if an interval contains two failing vectors, the probability that this case is interpreted as one failing vector is very low. We present experimental results for the ISCAS benchmark circuits to demonstrate the use of the proposed method for identifying failing test vectors Y1 - 2004 SN - 0923-8174 ER - TY - JOUR A1 - Besnard, Philippe A1 - Schaub, Torsten H. T1 - A simple signed system for paraconsistent reasoning Y1 - 1996 SN - 3-540-61630-6 ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael A1 - Sogomonyan, Egor S. T1 - A structural approach for space compaction for concurrent checking and BIST Y1 - 1998 ER - TY - BOOK A1 - Seuring, Markus A1 - Gössel, Michael A1 - Sogomonyan, Egor S. T1 - A structural approach for space compaction for concurrent checking and BIST T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1997 SN - 0946-7580 VL - 1997, 01 PB - Univ. Potsdam CY - Potsdam [u.a.] ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael T1 - A structural approach for space compaction for sequential circuits Y1 - 1999 ER - TY - BOOK A1 - Seuring, Markus A1 - Gössel, Michael T1 - A structural approach for space compaction for sequential circuits T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1998 SN - 0946-7580 VL - 1998, 05 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael T1 - A structural method for output compaction of sequential automata implemented as circuits Y1 - 1999 ER - TY - JOUR A1 - Lucke, Ulrike A1 - Rensing, Christoph T1 - A survey on pervasive education JF - Pervasive and mobile computing N2 - Researchers and developers worldwide have put their efforts into the design, development and use of information and communication technology to support teaching and learning. This research is driven by pedagogical as well as technological disciplines. The most challenging ideas are currently found in the application of mobile, ubiquitous, pervasive, contextualized and seamless technologies for education, which we shall refer to as pervasive education. This article provides a comprehensive overview of the existing work in this field and categorizes it with respect to educational settings. Using this approach, best practice solutions for certain educational settings and open questions for pervasive education are highlighted in order to inspire interested developers and educators. The work is assigned to different fields, identified by the main pervasive technologies used and the educational settings. Based on these assignments we identify areas within pervasive education that are currently disregarded or deemed challenging so that further research and development in these fields are stimulated in a trans-disciplinary approach. (C) 2013 Elsevier B.V. All rights reserved. KW - Pervasive learning KW - Ubiquitous learning KW - Mobile learning KW - Contextualized learning KW - Seamless learning KW - E-learning KW - E-teaching KW - Context awareness KW - Adaptivity KW - Personalization KW - Augmentation Y1 - 2014 U6 - https://doi.org/10.1016/j.pmcj.2013.12.001 SN - 1574-1192 SN - 1873-1589 VL - 14 SP - 3 EP - 16 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Anger, Christian A1 - Konczak, Kathrin A1 - Linke, Thomas T1 - A system for non-monotonic reasoning under answer set semantics Y1 - 2001 SN - 3-540-42593-4 ER - TY - GEN A1 - Frank, Mario A1 - Kreitz, Christoph T1 - A theorem prover for scientific and educational purposes T2 - Electronic proceedings in theoretical computer science N2 - We present a prototype of an integrated reasoning environment for educational purposes. The presented tool is a fragment of a proof assistant and automated theorem prover. We describe the existing and planned functionality of the theorem prover and especially the functionality of the educational fragment. This currently supports working with terms of the untyped lambda calculus and addresses both undergraduate students and researchers. We show how the tool can be used to support the students' understanding of functional programming and discuss general problems related to the process of building theorem proving software that aims at supporting both research and education. Y1 - 2018 U6 - https://doi.org/10.4204/EPTCS.267.4 SN - 2075-2180 IS - 267 SP - 59 EP - 69 PB - Open Publishing Association CY - Sydney ER - TY - JOUR A1 - Wang, Kewen T1 - A top-down procedure for disjucntive well-founded semantics Y1 - 2001 ER - TY - JOUR A1 - Wang, Kewen T1 - A top-down procedure for disjucntive well-founded semantics Y1 - 2001 SN - 3-540-42254-4 ER - TY - JOUR A1 - Ly, Ibrahim A1 - Tarkhanov, Nikolai Nikolaevich T1 - A variational approach to the Cauchy problem for nonlinear elliptic differential equations N2 - We discuss the relaxation of a class of nonlinear elliptic Cauchy problems with data on a piece S of the boundary surface by means of a variational approach known in the optimal control literature as "equation error method". By the Cauchy problem is meant any boundary value problem for an unknown function y in a domain X with the property that the data on S, if combined with the differential equations in X, allow one to determine all derivatives of y on S by means of functional equations. In the case of real analytic data of the Cauchy problem, the existence of a local solution near S is guaranteed by the Cauchy-Kovalevskaya theorem. We also admit overdetermined elliptic systems, in which case the set of those Cauchy data on S for which the Cauchy problem is solvable is very "thin". For this reason we discuss a variational setting of the Cauchy problem which always possesses a generalised solution. Y1 - 2009 UR - http://dx.doi.org/10.1515/jiip U6 - https://doi.org/10.1515/Jiip.2009.037 SN - 0928-0219 ER - TY - CHAP A1 - Kiy, Alexander A1 - List, Christoph A1 - Lucke, Ulrike T1 - A virtual environment and infrastructure to ensure future readiness of Computer Centers T2 - European Journal of Higher Education IT N2 - The ongoing digitalization leads to a need of continuous change of ICT (Information and Communi-cation Technology) in all university domains and therefore affects all stakeholders in this arena. More and more ICT components, systems and tools occur and have to be integrated into the existing processes and infrastructure of the institutions. These tasks include the transfer of resources and information across multiple ICT systems. By using so-called virtual environments for domains of re-search, education, learning and work, the performance of daily tasks can be aided. Based on a user requirement analysis different short- and long-term objectives were identified and are tackled now in the context of a federal research project. In order to be prepared for the ongoing digitalization, new systems have to be provided. Both, a service-oriented infrastructure and a related web-based virtual learning environment constitute the platform Campus.UP and creates the necessary basis to be ready for future challenges. The current focus lies on e-portfolio work, hence we will present a related focus group evaluation. The results indicate a tremendous need to extend the possibilities of sharing resources across system boundaries, in order to enable a comfortable participation of exter-nal cooperating parties and to clarify the focus of each connected system. The introduction of such an infrastructure implies far-reaching changes for traditional data centers. Therefore, the challenges and risks of faculty conducting innovation projects for the ICT organization are taken as a starting point to stimulate a discussion, how data centers can utilize projects to be ready for the future needs. We are confident that Campus.UP will provide the basis for ensuring the persistent transfer of innovation to the ICT organization and thus will contribute to tackle the future challenges of digitalization. Y1 - 2017 UR - http://www.eunis.org/erai/2017-1/ SN - 2519-1764 VL - 2017 IS - 1 ER - TY - THES A1 - Hu, Ji T1 - A virtual machine architecture for IT-security laboratories T1 - Eine virtuelle maschinenbasierte Architektur für IT-Sicherheitslabore N2 - This thesis discusses challenges in IT security education, points out a gap between e-learning and practical education, and presents a work to fill the gap. E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in conventional computer laboratories poses particular problems such as immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. In this thesis, we introduce the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibility to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by a virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present a security management solution to prevent the misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This thesis demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically. N2 - Diese Dissertation beschreibt die Herausforderungen in der IT Sicherheitsausbildung und weist auf die noch vorhandene Lücke zwischen E-Learning und praktischer Ausbildung hin. Sie erklärt einen Ansatz sowie ein System, um diese Lücke zwischen Theorie und Praxis in der elektronischen Ausbildung zu schließen. E-Learning ist eine flexible und personalisierte Alternative zu traditionellen Lernmethoden. Heutigen E-Learning Systemen mangelt es jedoch an der Fähigkeit, praktische Erfahrungen über große Distanzen zu ermöglichen. Labor- bzw. Testumgebungen sowie praktische Übungen sind jedoch unverzichtbar, wenn es um die Ausbildung von Sicherheitsfachkräften geht. Konventionelle Laborumgebungen besitzen allerdings einige Nachteile wie bspw. hoher Erstellungsaufwand, keine Mobilität, hohe Wartungskosten, etc. Die Herausforderung heutiger IT Sicherheitsausbildung ist es daher, praktische Sicherheitslaborumgebungen und Übungen effektiv mittels E-Learning zu unterstützen. In dieser Dissertation wird die Architektur von Tele-Lab IT-Security vorgestellt, die Studenten nicht nur erlaubt theoretische Sicherheitskonzepte zu erlernen, sondern darüber hinaus Sicherheitsübungen in einer Online-Laborumgebung praktisch zu absolvieren. Die Teilnehmer können auf diese Weise wichtige praktische Erfahrungen im Umgang mit Sicherheitsprogrammen sammeln. Zur Realisierung einer sicheren Übungsumgebung, werden virtuelle Maschinen anstatt reale Rechner im Tele-Lab System verwendet. Mittels virtueller Maschinen können leicht Laborumgebungen geklont, verwaltet und über das Internet zugänglich gemacht werden. Im Vergleich zu herkömmlichen Offline-Laboren können somit erhebliche Investitions- und Wartungskosten gespart werden. Das Tele-Lab System bietet eine Reihe von technischen Funktionen, die den effektiven, zuverlässigen und sicheren Betrieb dieses Trainingssystems gewährleistet. Unter Beachtung angemessener Ressourcennutzung, Softwareinstallationen und Systemkonfigurationen wurden virtuelle Maschinen als Übungsstationen erstellt, die auf einem einzelnen Rechner betrieben werden. Für ihre Zuverlässigkeit und Verfügbarkeit ist das Managementsystem der virtuellen Maschinen verantwortlich. Diese Komponente besitzt die notwendigen Überwachungs- und Verwaltungsfunktionen, um kritische Fehler der virtuellen Maschinen während der Laufzeit zu erkennen und zu beheben. Damit die Übungsstationen nicht bspw. zur Kompromittierung von Produktivnetzwerken genutzt werden, beschreibt die Dissertation Sicherheits-Managementlösungen, die mittels Isolation auf System und Netzwerk Ebene genau dieses Risiko verhindern sollen. Diese Arbeit ist der Versuch, die Lücke zwischen E-Learning/Tele-Teaching und praktischer Sicherheitsausbildung zu schließen. Sie verfolgt nicht das Ziel, konventionelle Ausbildung in Offline Laboren zu ersetzen, sondern auch praktische Erfahrungen via E-Learning zu unterstützen. Die Dissertation zeigt die Möglichkeit, praktische Erfahrungen mittels Sicherheitsübungsumgebungen über das Internet auf zuverlässige, sichere und wirtschaftliche Weise zu vermitteln. KW - Computersicherheit KW - VM KW - E-Learning KW - IT security KW - virtual machine KW - E-Learning Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7818 ER - TY - JOUR A1 - Brüning, Stefan A1 - Schaub, Torsten H. T1 - A voiding non-ground variables Y1 - 1999 ER - TY - JOUR A1 - Respondek, Tobias T1 - A workflow for computing potential areas for wind turbines JF - Process design for natural scientists: an agile model-driven approach N2 - This paper describes the implementation of a workflow model for service-oriented computing of potential areas for wind turbines in jABC. By implementing a re-executable model the manual effort of a multi-criteria site analysis can be reduced. The aim is to determine the shift of typical geoprocessing tools of geographic information systems (GIS) from the desktop to the web. The analysis is based on a vector data set and mainly uses web services of the “Center for Spatial Information Science and Systems” (CSISS). This paper discusses effort, benefits and problems associated with the use of the web services. Y1 - 2014 SN - 978-3-662-45005-5 IS - 500 SP - 200 EP - 215 PB - Springer CY - Berlin ER - TY - JOUR A1 - Schwill, Andreas T1 - Ab wann kann man mit Indern Informatik machen? : eine Studie über informatische Fähigkeiten von Kindern Y1 - 2001 UR - http://www.informatica-didactica.de/Forschung/Schriften/INFOS2001Paderborn.pdf ER - TY - JOUR A1 - Konczak, Kathrin A1 - Vogel, Ralf T1 - Abduction and Preferences in Linguistics Y1 - 2005 UR - http://www.cs.uni-potsdam.de/~konczak/Papers/konvog05a.pdf ER - TY - JOUR A1 - Konczak, Kathrin A1 - Vogel, Ralf T1 - Abduction and preferences in linguistics : Extended abstract Y1 - 2005 UR - http://www.cs.uni-potsdam.de/~konczak/Papers/konvog05b.pdf SN - 0302-9743 ER - TY - BOOK A1 - Pupka, Reiner A1 - Bartl, Peter A1 - Keller, Vera A1 - Kupries, Mario A1 - Reichel, Ingrid A1 - Schmidt, Maren A1 - Tiede, Gabriele T1 - Abschlußbericht zum Verbundprojekt "Rechnergestützte Modellierung und Steuerung der Vorgangsbearbeitung in verteilten Verwaltungs- und Organisationssystemen" T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 01 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Polyvyanyy, Artem T1 - Abstraction of process specifications Y1 - 2010 SN - 978-3-86956-036-6 ER - TY - JOUR A1 - Fabian, Benjamin A1 - Kunz, Steffen A1 - Konnegen, Marcel A1 - Müller, Sebastian A1 - Günther, Oliver T1 - Access control for semantic data federations in industrial product-lifecycle management JF - Computers in industry : an international, application oriented research journal N2 - Information integration across company borders becomes increasingly important for the success of product lifecycle management in industry and complex supply chains. Semantic technologies are about to play a crucial role in this integrative process. However, cross-company data exchange requires mechanisms to enable fine-grained access control definition and enforcement, preventing unauthorized leakage of confidential data across company borders. Currently available semantic repositories are not sufficiently equipped to satisfy this important requirement. This paper presents an infrastructure for controlled sharing of semantic data between cooperating business partners. First, we motivate the need for access control in semantic data federations by a case study in the industrial service sector. Furthermore, we present an architecture for controlling access to semantic repositories that is based on our newly developed SemForce security service. Finally, we show the practical feasibility of this architecture by an implementation and several performance experiments. KW - Access control KW - Data federation KW - Information integration KW - Product lifecycle management KW - Semantic data Y1 - 2012 U6 - https://doi.org/10.1016/j.compind.2012.08.015 SN - 0166-3615 VL - 63 IS - 9 SP - 930 EP - 940 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Zhou, Wei T1 - Access control model and policies for collaborative environments Y1 - 2008 CY - Potsdam ER - TY - BOOK ED - Jürgensen, Helmut T1 - Accessible Media : Pre-Proceedings of a Workshop Potsdam 8-9 May, 2006 T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 2006 SN - 0946-7580 VL - 2006, 7 PB - Univ. CY - Potsdam ER - TY - THES A1 - Sawade, Christoph T1 - Active evaluation of predictive models T1 - Aktive Evaluierung von Vorhersagemodellen N2 - The field of machine learning studies algorithms that infer predictive models from data. Predictive models are applicable for many practical tasks such as spam filtering, face and handwritten digit recognition, and personalized product recommendation. In general, they are used to predict a target label for a given data instance. In order to make an informed decision about the deployment of a predictive model, it is crucial to know the model’s approximate performance. To evaluate performance, a set of labeled test instances is required that is drawn from the distribution the model will be exposed to at application time. In many practical scenarios, unlabeled test instances are readily available, but the process of labeling them can be a time- and cost-intensive task and may involve a human expert. This thesis addresses the problem of evaluating a given predictive model accurately with minimal labeling effort. We study an active model evaluation process that selects certain instances of the data according to an instrumental sampling distribution and queries their labels. We derive sampling distributions that minimize estimation error with respect to different performance measures such as error rate, mean squared error, and F-measures. An analysis of the distribution that governs the estimator leads to confidence intervals, which indicate how precise the error estimation is. Labeling costs may vary across different instances depending on certain characteristics of the data. For instance, documents differ in their length, comprehensibility, and technical requirements; these attributes affect the time a human labeler needs to judge relevance or to assign topics. To address this, the sampling distribution is extended to incorporate instance-specific costs. We empirically study conditions under which the active evaluation processes are more accurate than a standard estimate that draws equally many instances from the test distribution. We also address the problem of comparing the risks of two predictive models. The standard approach would be to draw instances according to the test distribution, label the selected instances, and apply statistical tests to identify significant differences. Drawing instances according to an instrumental distribution affects the power of a statistical test. We derive a sampling procedure that maximizes test power when used to select instances, and thereby minimizes the likelihood of choosing the inferior model. Furthermore, we investigate the task of comparing several alternative models; the objective of an evaluation could be to rank the models according to the risk that they incur or to identify the model with lowest risk. An experimental study shows that the active procedure leads to higher test power than the standard test in many application domains. Finally, we study the problem of evaluating the performance of ranking functions, which are used for example for web search. In practice, ranking performance is estimated by applying a given ranking model to a representative set of test queries and manually assessing the relevance of all retrieved items for each query. We apply the concepts of active evaluation and active comparison to ranking functions and derive optimal sampling distributions for the commonly used performance measures Discounted Cumulative Gain and Expected Reciprocal Rank. Experiments on web search engine data illustrate significant reductions in labeling costs. N2 - Maschinelles Lernen befasst sich mit Algorithmen zur Inferenz von Vorhersagemodelle aus komplexen Daten. Vorhersagemodelle sind Funktionen, die einer Eingabe – wie zum Beispiel dem Text einer E-Mail – ein anwendungsspezifisches Zielattribut – wie „Spam“ oder „Nicht-Spam“ – zuweisen. Sie finden Anwendung beim Filtern von Spam-Nachrichten, bei der Text- und Gesichtserkennung oder auch bei der personalisierten Empfehlung von Produkten. Um ein Modell in der Praxis einzusetzen, ist es notwendig, die Vorhersagequalität bezüglich der zukünftigen Anwendung zu schätzen. Für diese Evaluierung werden Instanzen des Eingaberaums benötigt, für die das zugehörige Zielattribut bekannt ist. Instanzen, wie E-Mails, Bilder oder das protokollierte Nutzerverhalten von Kunden, stehen häufig in großem Umfang zur Verfügung. Die Bestimmung der zugehörigen Zielattribute ist jedoch ein manueller Prozess, der kosten- und zeitaufwendig sein kann und mitunter spezielles Fachwissen erfordert. Ziel dieser Arbeit ist die genaue Schätzung der Vorhersagequalität eines gegebenen Modells mit einer minimalen Anzahl von Testinstanzen. Wir untersuchen aktive Evaluierungsprozesse, die mit Hilfe einer Wahrscheinlichkeitsverteilung Instanzen auswählen, für die das Zielattribut bestimmt wird. Die Vorhersagequalität kann anhand verschiedener Kriterien, wie der Fehlerrate, des mittleren quadratischen Verlusts oder des F-measures, bemessen werden. Wir leiten die Wahrscheinlichkeitsverteilungen her, die den Schätzfehler bezüglich eines gegebenen Maßes minimieren. Der verbleibende Schätzfehler lässt sich anhand von Konfidenzintervallen quantifizieren, die sich aus der Verteilung des Schätzers ergeben. In vielen Anwendungen bestimmen individuelle Eigenschaften der Instanzen die Kosten, die für die Bestimmung des Zielattributs anfallen. So unterscheiden sich Dokumente beispielsweise in der Textlänge und dem technischen Anspruch. Diese Eigenschaften beeinflussen die Zeit, die benötigt wird, mögliche Zielattribute wie das Thema oder die Relevanz zuzuweisen. Wir leiten unter Beachtung dieser instanzspezifischen Unterschiede die optimale Verteilung her. Die entwickelten Evaluierungsmethoden werden auf verschiedenen Datensätzen untersucht. Wir analysieren in diesem Zusammenhang Bedingungen, unter denen die aktive Evaluierung genauere Schätzungen liefert als der Standardansatz, bei dem Instanzen zufällig aus der Testverteilung gezogen werden. Eine verwandte Problemstellung ist der Vergleich von zwei Modellen. Um festzustellen, welches Modell in der Praxis eine höhere Vorhersagequalität aufweist, wird eine Menge von Testinstanzen ausgewählt und das zugehörige Zielattribut bestimmt. Ein anschließender statistischer Test erlaubt Aussagen über die Signifikanz der beobachteten Unterschiede. Die Teststärke hängt von der Verteilung ab, nach der die Instanzen ausgewählt wurden. Wir bestimmen die Verteilung, die die Teststärke maximiert und damit die Wahrscheinlichkeit minimiert, sich für das schlechtere Modell zu entscheiden. Des Weiteren geben wir eine Möglichkeit an, den entwickelten Ansatz für den Vergleich von mehreren Modellen zu verwenden. Wir zeigen empirisch, dass die aktive Evaluierungsmethode im Vergleich zur zufälligen Auswahl von Testinstanzen in vielen Anwendungen eine höhere Teststärke aufweist. Im letzten Teil der Arbeit werden das Konzept der aktiven Evaluierung und das des aktiven Modellvergleichs auf Rankingprobleme angewendet. Wir leiten die optimalen Verteilungen für das Schätzen der Qualitätsmaße Discounted Cumulative Gain und Expected Reciprocal Rank her. Eine empirische Studie zur Evaluierung von Suchmaschinen zeigt, dass die neu entwickelten Verfahren signifikant genauere Schätzungen der Rankingqualität liefern als die untersuchten Referenzverfahren. KW - Aktive Evaluierung KW - Vorhersagemodelle KW - Maschinelles Lernen KW - Fehlerschätzung KW - Statistische Tests KW - Active Evaluation KW - Predictive Models KW - Machine Learning KW - Error Estimation KW - Statistical Tests Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65583 SN - 978-3-86956-255-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Sawade, Christoph A1 - Bickel, Steffen A1 - von Oertzen, Timo A1 - Scheffer, Tobias A1 - Landwehr, Niels T1 - Active evaluation of ranking functions based on graded relevance JF - Machine learning N2 - Evaluating the quality of ranking functions is a core task in web search and other information retrieval domains. Because query distributions and item relevance change over time, ranking models often cannot be evaluated accurately on held-out training data. Instead, considerable effort is spent on manually labeling the relevance of query results for test queries in order to track ranking performance. We address the problem of estimating ranking performance as accurately as possible on a fixed labeling budget. Estimates are based on a set of most informative test queries selected by an active sampling distribution. Query labeling costs depend on the number of result items as well as item-specific attributes such as document length. We derive cost-optimal sampling distributions for the commonly used performance measures Discounted Cumulative Gain and Expected Reciprocal Rank. Experiments on web search engine data illustrate significant reductions in labeling costs. KW - Information retrieval KW - Ranking KW - Active evaluation Y1 - 2013 U6 - https://doi.org/10.1007/s10994-013-5372-5 SN - 0885-6125 VL - 92 IS - 1 SP - 41 EP - 64 PB - Springer CY - Dordrecht ER - TY - JOUR A1 - Luckow, Andre A1 - Jha, Shantenu A1 - Kim, Joohyun A1 - Merzky, Andre A1 - Schnor, Bettina T1 - Adaptive distributed replica-exchange simulations N2 - Owing to the loose coupling between replicas, the replica-exchange (RE) class of algorithms should be able to benefit greatly from using as many resources as available. However, the ability to effectively use multiple distributed resources to reduce the time to completion remains a challenge at many levels. Additionally, an implementation of a pleasingly distributed algorithm such as replica-exchange, which is independent of infrastructural details, does not exist. This paper proposes an extensible and scalable framework based on Simple API for Grid Applications that provides a general-purpose, opportunistic mechanism to effectively use multiple resources in an infrastructure-independent way. By analysing the requirements of the RE algorithm and the challenges of implementing it on real production systems, we propose a new abstraction (BIGJOB), which forms the basis of the adaptive redistribution and effective scheduling of replicas. Y1 - 2009 UR - http://rsta.royalsocietypublishing.org/ U6 - https://doi.org/10.1098/rsta.2009.0051 SN - 1364-503X ER - TY - THES A1 - Hetzer, Dirk T1 - Adaptive Quality of Service based Bandwidth Planning in Internet Y1 - 2006 CY - Potsdam ER - TY - JOUR A1 - Kupries, Mario T1 - ADE : An architecture type-based development environment for agent application systems Y1 - 1999 UR - http://www.agentlink.org/newsletter/ ER - TY - JOUR A1 - Brewka, Gerhard A1 - Ellmauthaler, Stefan A1 - Kern-Isberner, Gabriele A1 - Obermeier, Philipp A1 - Ostrowski, Max A1 - Romero, Javier A1 - Schaub, Torsten H. A1 - Schieweck, Steffen T1 - Advanced solving technology for dynamic and reactive applications JF - Künstliche Intelligenz Y1 - 2018 U6 - https://doi.org/10.1007/s13218-018-0538-8 SN - 0933-1875 SN - 1610-1987 VL - 32 IS - 2-3 SP - 199 EP - 200 PB - Springer CY - Heidelberg ER - TY - THES A1 - Hecher, Markus T1 - Advanced tools and methods for treewidth-based problem solving N2 - In the last decades, there was a notable progress in solving the well-known Boolean satisfiability (Sat) problem, which can be witnessed by powerful Sat solvers. One of the reasons why these solvers are so fast are structural properties of instances that are utilized by the solver’s interna. This thesis deals with the well-studied structural property treewidth, which measures the closeness of an instance to being a tree. In fact, there are many problems parameterized by treewidth that are solvable in polynomial time in the instance size when parameterized by treewidth. In this work, we study advanced treewidth-based methods and tools for problems in knowledge representation and reasoning (KR). Thereby, we provide means to establish precise runtime results (upper bounds) for canonical problems relevant to KR. Then, we present a new type of problem reduction, which we call decomposition-guided (DG) that allows us to precisely monitor the treewidth when reducing from one problem to another problem. This new reduction type will be the basis for a long-open lower bound result for quantified Boolean formulas and allows us to design a new methodology for establishing runtime lower bounds for problems parameterized by treewidth. Finally, despite these lower bounds, we provide an efficient implementation of algorithms that adhere to treewidth. Our approach finds suitable abstractions of instances, which are subsequently refined in a recursive fashion, and it uses Sat solvers for solving subproblems. It turns out that our resulting solver is quite competitive for two canonical counting problems related to Sat. N2 - In den letzten Jahrzehnten konnte ein beachtlicher Fortschritt im Bereich der Aussagenlogik verzeichnet werden. Dieser äußerte sich dadurch, dass für das wichtigste Problem in diesem Bereich, genannt „Sat“, welches sich mit der Fragestellung befasst, ob eine gegebene aussagenlogische Formel erfüllbar ist oder nicht, überwältigend schnelle Computerprogramme („Solver“) entwickelt werden konnten. Interessanterweise liefern diese Solver eine beeindruckende Leistung, weil sie oft selbst Probleminstanzen mit mehreren Millionen von Variablen spielend leicht lösen können. Auf der anderen Seite jedoch glaubt man in der Wissenschaft weitgehend an die Exponentialzeithypothese (ETH), welche besagt, dass man im schlimmsten Fall für das Lösen einer Instanz in diesem Bereich exponentielle Laufzeit in der Anzahl der Variablen benötigt. Dieser vermeintliche Widerspruch ist noch immer nicht vollständig geklärt, denn wahrscheinlich gibt es viele ineinandergreifende Gründe für die Schnelligkeit aktueller Sat Solver. Einer dieser Gründe befasst sich weitgehend mit strukturellen Eigenschaften von Probleminstanzen, die wohl indirekt und intern von diesen Solvern ausgenützt werden. Diese Dissertation beschäftigt sich mit solchen strukturellen Eigenschaften, nämlich mit der sogenannten Baumweite. Die Baumweite ist sehr gut erforscht und versucht zu messen, wie groß der Abstand von Probleminstanzen zu Bäumen ist (Baumnähe). Allerdings ist dieser Parameter sehr generisch und bei Weitem nicht auf Problemstellungen der Aussagenlogik beschränkt. Tatsächlich gibt es viele weitere Probleme, die parametrisiert mit Baumweite in polynomieller Zeit gelöst werden können. Interessanterweise gibt es auch viele Probleme in der Wissensrepräsentation (KR), von denen man davon ausgeht, dass sie härter sind als das Problem Sat, die bei beschränkter Baumweite in polynomieller Zeit gelöst werden können. Ein prominentes Beispiel solcher Probleme ist das Problem QSat, welches sich für die Gültigkeit einer gegebenen quantifizierten, aussagenlogischen Formel (QBF), das sind aussagenlogische Formeln, wo gewisse Variablen existenziell bzw. universell quantifiziert werden können, befasst. Bemerkenswerterweise wird allerdings auch im Zusammenhang mit Baumweite, ähnlich zu Methoden der klassischen Komplexitätstheorie, die tatsächliche Komplexität (Härte) solcher Problemen quantifiziert, wo man die exakte Laufzeitabhängigkeit beim Problemlösen in der Baumweite (Stufe der Exponentialität) beschreibt. Diese Arbeit befasst sich mit fortgeschrittenen, Baumweite-basierenden Methoden und Werkzeugen für Probleme der Wissensrepräsentation und künstlichen Intelligenz (AI). Dabei präsentieren wir Methoden, um präzise Laufzeitresultate (obere Schranken) für prominente Fragmente der Antwortmengenprogrammierung (ASP), welche ein kanonisches Paradigma zum Lösen von Problemen der Wissensrepräsentation darstellt, zu erhalten. Unsere Resultate basieren auf dem Konzept der dynamischen Programmierung, die angeleitet durch eine sogenannte Baumzerlegung und ähnlich dem Prinzip „Teile-und-herrsche“ funktioniert. Solch eine Baumzerlegung ist eine konkrete, strukturelle Zerlegung einer Probleminstanz, die sich stark an der Baumweite orientiert. Des Weiteren präsentieren wir einen neuen Typ von Problemreduktion, den wir als „decomposition-guided (DG)“, also „zerlegungsangeleitet“, bezeichnen. Dieser Reduktionstyp erlaubt es, Baumweiteerhöhungen und -verringerungen während einer Problemreduktion von einem bestimmten Problem zu einem anderen Problem präzise zu untersuchen und zu kontrollieren. Zusätzlich ist dieser neue Reduktionstyp die Basis, um ein lange offen gebliebenes Resultat betreffend quantifizierter, aussagenlogischer Formeln zu zeigen. Tatsächlich sind wir damit in der Lage, präzise untere Schranken, unter der Annahme der Exponentialzeithypothese, für das Problem QSat bei beschränkter Baumweite zu zeigen. Genauer gesagt können wir mit diesem Konzept der DG Reduktionen zeigen, dass das Problem QSat, beschränkt auf Quantifizierungsrang ` und parametrisiert mit Baumweite k, im Allgemeinen nicht besser als in einer Laufzeit, die `-fach exponentiell in der Baumweite und polynomiell in der Instanzgröße ist1, lösen. Dieses Resultat hebt auf nicht-inkrementelle Weise ein bekanntes Ergebnis für Quantifizierungsrang 2 auf beliebige Quantifizierungsränge, allerdings impliziert es auch sehr viele weitere Konsequenzen. Das Resultat über die untere Schranke des Problems QSat erlaubt es, eine neue Methodologie zum Zeigen unterer Schranken einer Vielzahl von Problemen der Wissensrepräsentation und künstlichen Intelligenz, zu etablieren. In weiterer Konsequenz können wir damit auch zeigen, dass die oberen Schranken sowie die DG Reduktionen dieser Arbeit unter der Hypothese ETH „eng“ sind, d.h., sie können wahrscheinlich nicht mehr signifikant verbessert werden. Die Ergebnisse betreffend der unteren Schranken für QSat und die dazugehörige Methodologie konstituieren in gewisser Weise eine Hierarchie von über Baumweite parametrisierte Laufzeitklassen. Diese Laufzeitklassen können verwendet werden, um die Härte von Problemen für das Ausnützen von Baumweite zu quantifizieren und diese entsprechend ihrer Laufzeitabhängigkeit bezüglich Baumweite zu kategorisieren. Schlussendlich und trotz der genannten Resultate betreffend unterer Schranken sind wir im Stande, eine effiziente Implementierung von Algorithmen basierend auf dynamischer Programmierung, die entlang einer Baumzerlegung angeleitet wird, zur Verfügung zu stellen. Dabei funktioniert unser Ansatz dahingehend, indem er probiert, passende Abstraktionen von Instanzen zu finden, die dann im Endeffekt sukzessive und auf rekursive Art und Weise verfeinert und verbessert werden. Inspiriert durch die enorme Effizienz und Effektivität der Sat Solver, ist unsere Implementierung ein hybrider Ansatz, weil sie den starken Gebrauch von Sat Solvern zum Lösen diverser Subprobleme, die während der dynamischen Programmierung auftreten, pflegt. Dabei stellt sich heraus, dass der resultierende Solver unserer Implementierung im Bezug auf Effizienz beim Lösen von zwei kanonischen, Sat-verwandten Zählproblemen mit bestehenden Solvern locker mithalten kann. Tatsächlich sind wir im Stande, Instanzen, wo die oberen Schranken von Baumweite 260 übersteigen, zu lösen. Diese überraschende Beobachtung zeigt daher, dass Baumweite ein wichtiger Parameter sein könnte, der wohl in modernen Designs von Solvern berücksichtigt werden sollte. KW - Treewidth KW - Dynamic Programming KW - Knowledge Representation and Reasoning KW - Artificial Intelligence KW - Computational Complexity KW - Parameterized Complexity KW - Answer Set Programming KW - Exponential Time Hypothesis KW - Lower Bounds KW - Algorithms KW - Algorithmen KW - Antwortmengenprogrammierung KW - Künstliche Intelligenz KW - Komplexitätstheorie KW - Dynamische Programmierung KW - Exponentialzeit Hypothese KW - Wissensrepräsentation und Schlussfolgerung KW - Untere Schranken KW - Parametrisierte Komplexität KW - Baumweite Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-512519 ER - TY - JOUR A1 - Weske, Mathias A1 - van der Aalst, Wil M. P. A1 - Verbeek, H. M. W. T1 - Advances in business process management Y1 - 2004 SN - 0169-023X ER - TY - BOOK ED - Solla, Sara A. ED - Müller, Klaus-Robert T1 - Advances in neural information processing systems 12 : proceedings of the 1999 conference Y1 - 2000 SN - 0-262-19450-3 PB - MIT Press CY - Cambridge, Mass. ER - TY - THES A1 - Müller, Stephan Heinz T1 - Aggregates Caching for Enterprise Applications N2 - The introduction of columnar in-memory databases, along with hardware evolution, has made the execution of transactional and analytical enterprise application workloads on a single system both feasible and viable. Yet, we argue that executing analytical aggregate queries directly on the transactional data can decrease the overall system performance. Despite the aggregation capabilities of columnar in-memory databases, the direct access to records of a materialized aggregate is always more efficient than aggregating on the fly. The traditional approach to materialized aggregates, however, introduces significant overhead in terms of materialized view selection, maintenance, and exploitation. When this overhead is handled by the application, it increases the application complexity, and can slow down the transactional throughput of inserts, updates, and deletes. In this thesis, we motivate, propose, and evaluate the aggregate cache, a materialized aggregate engine in the main-delta architecture of a columnar in-memory database that provides efficient means to handle costly aggregate queries of enterprise applications. For our design, we leverage the specifics of the main-delta architecture that separates a table into a main and delta partition. The central concept is to only cache the partial aggregate query result as defined on the main partition of a table, because the main partition is relatively stable as records are only inserted into the delta partition. We contribute by proposing incremental aggregate maintenance and query compensation techniques for mixed workloads of enterprise applications. In addition, we introduce aggregate profit metrics that increase the likelihood of persisting the most profitable aggregates in the aggregate cache. Query compensation and maintenance of materialized aggregates based on joins of multiple tables is expensive due to the partitioned tables in the main-delta architecture. Our analysis of enterprise applications has revealed several data schema and workload patterns. This includes the observation that transactional data is persisted in header and item tables, whereas in many cases, the insertion of related header and item records is executed in a single database transaction. We contribute by proposing an approach to transport these application object semantics to the database system and optimize the query processing using the aggregate cache by applying partition pruning and predicate pushdown techniques. For the experimental evaluation, we propose the FICO benchmark that is based on data from a productive ERP system with extracted mixed workloads. Our evaluation reveals that the aggregate cache can accelerate the execution of aggregate queries up to a factor of 60 whereas the speedup highly depends on the number of aggregated records in the main and delta partitions. In mixed workloads, the proposed aggregate maintenance and query compensation techniques perform up to an order of magnitude better than traditional materialized aggregate maintenance approaches. The introduced aggregate profit metrics outperform existing costbased metrics by up to 20%. Lastly, the join pruning and predicate pushdown techniques can accelerate query execution in the aggregate cache in the presence of multiple partitioned tables by up to an order of magnitude. Y1 - 2016 ER - TY - JOUR A1 - Hirschfeld, Robert A1 - Steinert, Bastian A1 - Lincke, Jens T1 - Agile software development in virtual collaboration environments Y1 - 2011 SN - 978-3-642-13756-3 ER - TY - THES A1 - Lindauer, T. Marius T1 - Algorithm selection, scheduling and configuration of Boolean constraint solvers N2 - Boolean constraint solving technology has made tremendous progress over the last decade, leading to industrial-strength solvers, for example, in the areas of answer set programming (ASP), the constraint satisfaction problem (CSP), propositional satisfiability (SAT) and satisfiability of quantified Boolean formulas (QBF). However, in all these areas, there exist multiple solving strategies that work well on different applications; no strategy dominates all other strategies. Therefore, no individual solver shows robust state-of-the-art performance in all kinds of applications. Additionally, the question arises how to choose a well-performing solving strategy for a given application; this is a challenging question even for solver and domain experts. One way to address this issue is the use of portfolio solvers, that is, a set of different solvers or solver configurations. We present three new automatic portfolio methods: (i) automatic construction of parallel portfolio solvers (ACPP) via algorithm configuration,(ii) solving the $NP$-hard problem of finding effective algorithm schedules with Answer Set Programming (aspeed), and (iii) a flexible algorithm selection framework (claspfolio2) allowing for fair comparison of different selection approaches. All three methods show improved performance and robustness in comparison to individual solvers on heterogeneous instance sets from many different applications. Since parallel solvers are important to effectively solve hard problems on parallel computation systems (e.g., multi-core processors), we extend all three approaches to be effectively applicable in parallel settings. We conducted extensive experimental studies different instance sets from ASP, CSP, MAXSAT, Operation Research (OR), SAT and QBF that indicate an improvement in the state-of-the-art solving heterogeneous instance sets. Last but not least, from our experimental studies, we deduce practical advice regarding the question when to apply which of our methods. N2 - Bool'sche Solver Technologie machte enormen Fortschritt im letzten Jahrzehnt, was beispielsweise zu industrie-relevanten Solvern auf der Basis von Antwortmengenprogrammierung (ASP), dem Constraint Satisfcation Problem (CSP), dem Erfüllbarkeitsproblem für aussagenlogische Formeln (SAT) und dem Erfüllbarkeitsproblem für quantifizierte boolesche Formeln (QBF) führte. Allerdings gibt es in all diesen Bereichen verschiedene Lösungsstrategien, welche bei verschiedenen Anwendungen unterschiedlich effizient sind. Dabei gibt es keine einzelne Strategie, die alle anderen Strategien dominiert. Das führt dazu, dass es keinen robusten Solver für das Lösen von allen möglichen Anwendungsprobleme gibt. Die Wahl der richtigen Strategie für eine neue Anwendung ist eine herausforderne Problemstellung selbst für Solver- und Anwendungsexperten. Eine Möglichkeit, um Solver robuster zu machen, sind Portfolio-Ansätze. Wir stellen drei automatisch einsetzbare Portfolio-Ansätze vor: (i) automatische Konstruktion von parallelen Portfolio-Solvern (ACPP) mit Algorithmen-Konfiguration, (ii) das Lösen des $NP$-harten Problems zur Algorithmen-Ablaufplanung (aspeed) mit ASP, und (iii) ein flexibles Algorithmen-Selektionsframework (claspfolio2), was viele Techniken von Algorithmen-Selektion parametrisiert implementiert und eine faire Vergleichbarkeit zwischen Ihnen erlaubt. Alle drei Methoden verbessern die Robustheit des Solvingprozesses für heterogenen Instanzmengen bestehend aus unterschiedlichsten Anwendungsproblemen. Parallele Solver sind zunehmend der Schlüssel zum effektiven Lösen auf multi-core Maschinen. Daher haben wir all unsere Ansätze auch für den Einsatz auf parallelen Architekturen erweitert. Umfangreiche Experimente auf ASP, CSP, MAXSAT, Operation Research (OR), SAT und QBF zeigen, dass der Stand der Technik durch verbesserte Performanz auf heterogenen Instanzmengen verbessert wurde. Auf Grundlage dieser Experimente leiten wir auch Ratschläge ab, in welchen Anwendungsszenarien welches unserer Verfahren angewendet werden sollte. T2 - Algorithmen-Selektion, -Ablaufplanung und -Konfiguration von Bool'schen Constraint Solvern KW - algorithm configuration KW - algorithm scheduling KW - algorithm selection KW - parallel solving KW - Boolean constraint solver KW - Algorithmenselektion KW - Algorithmenablaufplanung KW - Algorithmenkonfiguration KW - paralleles Lösen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-71260 ER -