TY - THES A1 - Grund, Martin T1 - Hyrise : a main memory hybrid database storage engine Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Appeltauer, Malte T1 - Extending Context-oriented Programming to New Application Domains: Run-time Adaptation Support for Java Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Schmidt, Alexander T1 - KStructur : ein Ansatz zur Analyse und Beschreibung von Nebenläufigkeit in Betriebssystemen Y1 - 2012 SN - 978-3-86955-977-1 PB - Guvillier CY - Göttingen ER - TY - THES A1 - Wagner, Christian T1 - Modellgetriebene Software-Migration Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Broß, Justus F. M. T1 - Understanding and leveraging the social physics of the blogosphere Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Zarezadeh, Aliakbar T1 - Distributed smart cameras : architecture and communication protocols Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Müller, Jürgen J. T1 - A real-time in-memory discovery service Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Scherfenberg, Ivonne T1 - A logic-based Framwork to enable Attribute Assurance for Digital Identities in Service-oriented Architectures and the Web Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Mahr, Philipp T1 - Resource efficient communication in network-based reconfigurable on-chip systems T1 - Ressourcen-effiziente Kommunikation in netzwerk-basierten, rekonfigurierbaren Systemen auf einem Chip N2 - The constantly growing capacity of reconfigurable devices allows simultaneous execution of complex applications on those devices. The mere diversity of applications deems it impossible to design an interconnection network matching the requirements of every possible application perfectly, leading to suboptimal performance in many cases. However, the architecture of the interconnection network is not the only aspect affecting performance of communication. The resource manager places applications on the device and therefore influences latency between communicating partners and overall network load. Communication protocols affect performance by introducing data and processing overhead putting higher load on the network and increasing resource demand. Approaching communication holistically not only considers the architecture of the interconnect, but communication-aware resource management, communication protocols and resource usage just as well. Incorporation of different parts of a reconfigurable system during design- and runtime and optimizing them with respect to communication demand results in more resource efficient communication. Extensive evaluation shows enhanced performance and flexibility, if communication on reconfigurable devices is regarded in a holistic fashion. N2 - Die Leistungsfähigkeit rekonfigurierbarer Rechensysteme steigt kontinuierlich und ermöglicht damit die parallele Ausführung von immer mehr und immer größeren Anwendungen. Die Vielfalt an Anwendungen macht es allerdings unmöglich ein optimales Kommunikationsnetzwerk zu entwickeln, welches die Anforderung jeder denkbaren Anwendung berücksichtigt. Die Performanz des rekonfigurierbaren Rechensystems sinkt. Das Kommunikationsnetzwerk ist jedoch nicht der einzige Teil des Systems, der Einfluss auf die Kommunikation- sperformanz nimmt. Die Ressourcenverwaltung des Systems beeinflusst durch die Platzierung der Anwendungen die Latenz zwischen Kommunikationspartnern und die Kommunikationslast im Netzwerk. Kommunikationsprotokolle beeinträchtigen die Performanz der Kommunikation durch Daten und Rechen- overhead, die ebenso zu erhöhter Netzwerklast sowie Ressourcenanforderungen führen. In einem ganzheitlichen Kommunikationsansatz wird nicht nur das Kommunikationsnetzwerk berücksichtigt, sondern außerdem Ressourcenverwaltung, Kommunikationsprotokolle und die anderweitige Verwendung vorhandener, temporär ungenutzter Kommunikationsressourcen. Durch Einbeziehung dieser Aspekte während Entwurfs- und Laufzeit und durch Optimierung unter Berücksichtigung der Kommunikationsanforderungen, wird eine ressourceneneffizien tere Kommunikation erreicht. Ausführliche Evaluationen zeigen, dass eine ganzheitliche Betrachtung von Kommunikationsfaktoren, Verbesserungen von Performanz und Flexibilität erzielt. KW - Rekonfiguration KW - Platzierung KW - Netzwerke KW - Kommunikation KW - reconfiguration KW - networks-on-chip KW - communication KW - placement KW - scheduling Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59914 ER - TY - THES A1 - Glander, Tassilo T1 - Multi-scale representations of virtual 3D city models T1 - Maßstabsabhängige Repräsentationen virtueller 3D-Stadtmodelle N2 - Virtual 3D city and landscape models are the main subject investigated in this thesis. They digitally represent urban space and have many applications in different domains, e.g., simulation, cadastral management, and city planning. Visualization is an elementary component of these applications. Photo-realistic visualization with an increasingly high degree of detail leads to fundamental problems for comprehensible visualization. A large number of highly detailed and textured objects within a virtual 3D city model may create visual noise and overload the users with information. Objects are subject to perspective foreshortening and may be occluded or not displayed in a meaningful way, as they are too small. In this thesis we present abstraction techniques that automatically process virtual 3D city and landscape models to derive abstracted representations. These have a reduced degree of detail, while essential characteristics are preserved. After introducing definitions for model, scale, and multi-scale representations, we discuss the fundamentals of map generalization as well as techniques for 3D generalization. The first presented technique is a cell-based generalization of virtual 3D city models. It creates abstract representations that have a highly reduced level of detail while maintaining essential structures, e.g., the infrastructure network, landmark buildings, and free spaces. The technique automatically partitions the input virtual 3D city model into cells based on the infrastructure network. The single building models contained in each cell are aggregated to abstracted cell blocks. Using weighted infrastructure elements, cell blocks can be computed on different hierarchical levels, storing the hierarchy relation between the cell blocks. Furthermore, we identify initial landmark buildings within a cell by comparing the properties of individual buildings with the aggregated properties of the cell. For each block, the identified landmark building models are subtracted using Boolean operations and integrated in a photo-realistic way. Finally, for the interactive 3D visualization we discuss the creation of the virtual 3D geometry and their appearance styling through colors, labeling, and transparency. We demonstrate the technique with example data sets. Additionally, we discuss applications of generalization lenses and transitions between abstract representations. The second technique is a real-time-rendering technique for geometric enhancement of landmark objects within a virtual 3D city model. Depending on the virtual camera distance, landmark objects are scaled to ensure their visibility within a specific distance interval while deforming their environment. First, in a preprocessing step a landmark hierarchy is computed, this is then used to derive distance intervals for the interactive rendering. At runtime, using the virtual camera distance, a scaling factor is computed and applied to each landmark. The scaling factor is interpolated smoothly at the interval boundaries using cubic Bézier splines. Non-landmark geometry that is near landmark objects is deformed with respect to a limited number of landmarks. We demonstrate the technique by applying it to a highly detailed virtual 3D city model and a generalized 3D city model. In addition we discuss an adaptation of the technique for non-linear projections and mobile devices. The third technique is a real-time rendering technique to create abstract 3D isocontour visualization of virtual 3D terrain models. The virtual 3D terrain model is visualized as a layered or stepped relief. The technique works without preprocessing and, as it is implemented using programmable graphics hardware, can be integrated with minimal changes into common terrain rendering techniques. Consequently, the computation is done in the rendering pipeline for each vertex, primitive, i.e., triangle, and fragment. For each vertex, the height is quantized to the nearest isovalue. For each triangle, the vertex configuration with respect to their isovalues is determined first. Using the configuration, the triangle is then subdivided. The subdivision forms a partial step geometry aligned with the triangle. For each fragment, the surface appearance is determined, e.g., depending on the surface texture, shading, and height-color-mapping. Flexible usage of the technique is demonstrated with applications from focus+context visualization, out-of-core terrain rendering, and information visualization. This thesis presents components for the creation of abstract representations of virtual 3D city and landscape models. Re-using visual language from cartography, the techniques enable users to build on their experience with maps when interpreting these representations. Simultaneously, characteristics of 3D geovirtual environments are taken into account by addressing and discussing, e.g., continuous scale, interaction, and perspective. N2 - Gegenstand der Arbeit sind virtuelle 3D-Stadt- und Landschaftsmodelle, die den städtischen Raum in digitalen Repräsentationen abbilden. Sie werden in vielfältigen Anwendungen und zu unterschiedlichen Zwecken eingesetzt. Dabei ist die Visualisierung ein elementarer Bestandteil dieser Anwendungen. Durch realitätsnahe Darstellung und hohen Detailgrad entstehen jedoch zunehmend fundamentale Probleme für eine verständliche Visualisierung. So führt beispielsweise die hohe Anzahl von detailliert ausmodellierten und texturierten Objekten eines virtuellen 3D-Stadtmodells zu Informationsüberflutung beim Betrachter. In dieser Arbeit werden Abstraktionsverfahren vorgestellt, die diese Probleme behandeln. Ziel der Verfahren ist die automatische Transformation virtueller 3D-Stadt- und Landschaftsmodelle in abstrakte Repräsentationen, die bei reduziertem Detailgrad wichtige Charakteristika erhalten. Nach der Einführung von Grundbegriffen zu Modell, Maßstab und Mehrfachrepräsentationen werden theoretische Grundlagen zur Generalisierung von Karten sowie Verfahren zur 3D-Generalisierung betrachtet. Das erste vorgestellte Verfahren beschreibt die zellbasierte Generalisierung von virtuellen 3DStadtmodellen. Es erzeugt abstrakte Repräsentationen, die drastisch im Detailgrad reduziert sind, erhält dabei jedoch die wichtigsten Strukturen, z.B. das Infrastrukturnetz, Landmarkengebäude und Freiflächen. Dazu wird in einem vollautomatischen Verfahren das Eingabestadtmodell mithilfe des Infrastrukturnetzes in Zellen zerlegt. Pro Zelle wird abstrakte Gebäudegeometrie erzeugt, indem die enthaltenen Einzelgebäude mit ihren Eigenschaften aggregiert werden. Durch Berücksichtigung gewichteter Elemente des Infrastrukturnetzes können Zellblöcke auf verschiedenen Hierarchieebenen berechnet werden. Weiterhin werden Landmarken gesondert berücksichtigt: Anhand statistischer Abweichungen der Eigenschaften der Einzelgebäudes von den aggregierten Eigenschaften der Zelle werden Gebäude gegebenenfalls als initiale Landmarken identifiziert. Schließlich werden die Landmarkengebäude aus den generalisierten Blöcken mit Booleschen Operationen ausgeschnitten und realitätsnah dargestellt. Die Ergebnisse des Verfahrens lassen sich in interaktiver 3D-Darstellung einsetzen. Das Verfahren wird beispielhaft an verschiedenen Datensätzen demonstriert und bezüglich der Erweiterbarkeit diskutiert. Das zweite vorgestellte Verfahren ist ein Echtzeit-Rendering-Verfahren für geometrische Hervorhebung von Landmarken innerhalb eines virtuellen 3D-Stadtmodells: Landmarkenmodelle werden abhängig von der virtuellen Kameradistanz vergrößert, so dass sie innerhalb eines spezifischen Entfernungsintervalls sichtbar bleiben; dabei wird ihre Umgebung deformiert. In einem Vorverarbeitungsschritt wird eine Landmarkenhierarchie bestimmt, aus der die Entfernungsintervalle für die interaktive Darstellung abgeleitet werden. Zur Laufzeit wird anhand der virtuellen Kameraentfernung je Landmarke ein dynamischer Skalierungsfaktor bestimmt, der das Landmarkenmodell auf eine sichtbare Größe skaliert. Dabei wird der Skalierungsfaktor an den Intervallgrenzen durch kubisch interpoliert. Für Nicht-Landmarkengeometrie in der Umgebung wird die Deformation bezüglich einer begrenzten Menge von Landmarken berechnet. Die Eignung des Verfahrens wird beispielhaft anhand verschiedener Datensätze demonstriert und bezüglich der Erweiterbarkeit diskutiert. Das dritte vorgestellte Verfahren ist ein Echtzeit-Rendering-Verfahren, das eine abstrakte 3D-Isokonturen-Darstellung von virtuellen 3D-Geländemodellen erzeugt. Für das Geländemodell wird eine Stufenreliefdarstellung für eine Menge von nutzergewählten Höhenwerten erzeugt. Das Verfahren arbeitet ohne Vorverarbeitung auf Basis programmierbarer Grafikkarten-Hardware. Entsprechend erfolgt die Verarbeitung in der Prozesskette pro Geometrieknoten, pro Dreieck, und pro Bildfragment. Pro Geometrieknoten wird zunächst die Höhe auf den nächstliegenden Isowert quantisiert. Pro Dreieck wird dann die Konfiguration bezüglich der Isowerte der drei Geometrieknoten bestimmt. Anhand der Konfiguration wird eine geometrische Unterteilung vorgenommen, so dass ein Stufenausschnitt entsteht, der dem aktuellen Dreieck entspricht. Pro Bildfragment wird schließlich die finale Erscheinung definiert, z.B. anhand von Oberflächentextur, durch Schattierung und Höheneinfärbung. Die vielfältigen Einsatzmöglichkeiten werden mit verschiedenen Anwendungen demonstriert. Die Arbeit stellt Bausteine für die Erzeugung abstrakter Darstellungen von virtuellen 3D-Stadt und Landschaftsmodellen vor. Durch die Orientierung an kartographischer Bildsprache können die Nutzer auf bestehende Erfahrungen bei der Interpretation zurückgreifen. Dabei werden die charakteristischen Eigenschaften 3D geovirtueller Umgebungen berücksichtigt, indem z.B. kontinuierlicher Maßstab, Interaktion und Perspektive behandelt und diskutiert werden. KW - Generalisierung KW - virtuelle 3D-Stadtmodelle KW - Gebäudemodelle KW - Landmarken KW - Geländemodelle KW - generalization KW - virtual 3D city models KW - building models KW - landmarks KW - terrain models Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64117 ER -