TY - THES A1 - Off, Thomas T1 - Durchgängige Verfolgbarkeit im Vorfeld der Softwareentwicklung von E-Government-Anwendungen : ein ontologiebasierter und modellgetriebener Ansatz am Beispiel von Bürgerdiensten T1 - Continuous pre-requirements specification traceability for e-government : ontology based and model driven approach using the example of citizen services N2 - Die öffentliche Verwaltung setzt seit mehreren Jahren E-Government-Anwendungssysteme ein, um ihre Verwaltungsprozesse intensiver mit moderner Informationstechnik zu unterstützen. Da die öffentliche Verwaltung in ihrem Handeln in besonderem Maße an Recht und Gesetz gebunden ist verstärkt und verbreitet sich der Zusammenhang zwischen den Gesetzen und Rechtsvorschriften einerseits und der zur Aufgabenunterstützung eingesetzten Informationstechnik andererseits. Aus Sicht der Softwaretechnik handelt es sich bei diesem Zusammenhang um eine spezielle Form der Verfolgbarkeit von Anforderungen (engl. Traceability), die so genannte Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (Pre-Requirements Specification Traceability, kurz Pre-RS Traceability), da sie Aspekte betrifft, die relevant sind, bevor die Anforderungen in eine Spezifikation eingeflossen sind (Ursprünge von Anforderungen). Der Ansatz dieser Arbeit leistet einen Beitrag zur Verfolgbarkeit im Vorfeld der Anforderungsspezifikation von E-Government-Anwendungssystemen. Er kombiniert dazu aktuelle Entwicklungen und Standards (insbesondere des World Wide Web Consortium und der Object Management Group) aus den Bereichen Verfolgbarkeit von Anforderungen, Semantic Web, Ontologiesprachen und modellgetriebener Softwareentwicklung. Der Lösungsansatz umfasst eine spezielle Ontologie des Verwaltungshandeln, die mit den Techniken, Methoden und Werkzeugen des Semantic Web eingesetzt wird, um in Texten von Rechtsvorschriften relevante Ursprünge von Anforderungen durch Annotationen mit einer definierten Semantik zu versehen. Darauf aufbauend wird das Ontology Definition Metamodel (ODM) verwendet, um die Annotationen als spezielle Individuen einer Ontologie auf Elemente der Unified Modeling Language (UML) abzubilden. Dadurch entsteht ein neuer Modelltyp Pre-Requirements Model (PRM), der das Vorfeld der Anforderungsspezifikation formalisiert. Modelle diesen Typs können auch verwendet werden, um Aspekte zu formalisieren die sich nicht oder nicht vollständig aus dem Text der Rechtsvorschrift ergeben. Weiterhin bietet das Modell die Möglichkeit zum Anschluss an die modellgetriebene Softwareentwicklung. In der Arbeit wird deshalb eine Erweiterung der Model Driven Architecture (MDA) vorgeschlagen. Zusätzlich zu den etablierten Modelltypen Computation Independent Model (CIM), Platform Independent Model (PIM) und Platform Specific Model (PSM) könnte der Einsatz des PRM Vorteile für die Verfolgbarkeit bringen. Wird die MDA mit dem PRM auf das Vorfeld der Anforderungsspezifikation ausgeweitet, kann eine Transformation des PRM in ein CIM als initiale Anforderungsspezifikation erfolgen, indem der MOF Query View Transformation Standard (QVT) eingesetzt wird. Als Teil des QVT-Standards ist die Aufzeichnung von Verfolgbarkeitsinformationen bei Modelltransformationen verbindlich. Um die semantische Lücke zwischen PRM und CIM zu überbrücken, erfolgt analog zum Einsatz des Plattformmodells (PM) in der PIM nach PSM Transformation der Einsatz spezieller Hilfsmodelle. Es kommen dafür die im Projekt "E-LoGo" an der Universität Potsdam entwickelten Referenzmodelle zum Einsatz. Durch die Aufzeichnung der Abbildung annotierter Textelemente auf Elemente im PRM und der Transformation der Elemente des PRM in Elemente des CIM kann durchgängige Verfolgbarkeit im Vorfeld der Anforderungsspezifikation erreicht werden. Der Ansatz basiert auf einer so genannten Verfolgbarkeitsdokumentation in Form verlinkter Hypertextdokumente, die mittels XSL-Stylesheet erzeugt wurden und eine Verbindung zur graphischen Darstellung des Diagramms (z. B. Anwendungsfall-, Klassendiagramm der UML) haben. Der Ansatz unterstützt die horizontale Verfolgbarkeit zwischen Elementen unterschiedlicher Modelle vorwärts- und rückwärtsgerichtet umfassend. Er bietet außerdem vertikale Verfolgbarkeit, die Elemente des gleichen Modells und verschiedener Modellversionen in Beziehung setzt. Über den offensichtlichen Nutzen einer durchgängigen Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (z. B. Analyse der Auswirkungen einer Gesetzesänderung, Berücksichtigung des vollständigen Kontextes einer Anforderung bei ihrer Priorisierung) hinausgehend, bietet diese Arbeit eine erste Ansatzmöglichkeit für eine Feedback-Schleife im Prozess der Gesetzgebung. Stehen beispielsweise mehrere gleichwertige Gestaltungsoptionen eines Gesetzes zur Auswahl, können die Auswirkungen jeder Option analysiert und der Aufwand ihrer Umsetzung in E-Government-Anwendungen als Auswahlkriterium berücksichtigt werden. Die am 16. März 2011 in Kraft getretene Änderung des NKRG schreibt eine solche Analyse des so genannten „Erfüllungsaufwands“ für Teilbereiche des Verwaltungshandelns bereits heute verbindlich vor. Für diese Analyse kann die vorliegende Arbeit einen Ansatz bieten, um zu fundierten Aussagen über den Änderungsaufwand eingesetzter E-Government-Anwendungssysteme zu kommen. N2 - Public administration is using electronic government (e-government) application systems for several years to support their processes more intensive with modern information and communication technology than ever before. This increases and broadens the relationship between law and legislation executed by the administration on the one hand and requirements to e-government application systems used to support administrative execution on the other hand. This relationship is subject matter of pre-requirements specification traceability (pre-RS traceability). This work introduces an approach to pre-RS traceabiliy for e-government application. It combines research efforts and standards (i.e. of World Wide Web Consortium and Object Management Group) from different fields: traceability, semantic web, ontology engineering and model driven software engineering. Using this approach it is possible to add a semantic to elements of law and legislation texts using annotations. Annotation semantics is based on an ontology of public administration execution developed especially for this approach. A mapping from annotated text elements as a special kind of ontology individuals to elements of Unified Modeling Language (UML) is created using the Ontology Definition Metamodel (ODM). This mapping results in a new model type referred to as Pre-Requirements Model (PRM). This model uses elements that exist before requirements are explicitly documented in a requirements specification. Therefore it can be primary used to formalize elements and their relationships in the pre-requirements scope. Through the mapping rules of ODM it keeps a traceable relationship from each model element to its corresponding annotated text elements. PRM can also be used to model and refine elements that are not or not completely derived directly from text of law and legislation. In this work is argued that Model Driven Architecture (MDA) might profit from extending the existing model types Computation Independent Model (CIM), Platform Independent Model (PIM) and Platform Specific Model (PSM) by using a PRM. This extension leads to an Architecture that starts with a pre-requirements viewpoint before any requirements are formalized and documented in models of type CIM. It offers also the opportunity to use model transformation to create an initial CIM from PRM by allying the MOF Query View Transformation standard (QVT). Using QVT ensures the traceability of model transformation because standard enforces recording of traceability information. A Transformation from PRM to CIM creates an initial requirements specification that can be refined using common techniques, methods and tools. To bridge the semantic gap between PRM and CIM the approach follows the pattern of PIM to PSM transformation which uses the Platform Model (PM). Analogues PRM to CIM transformation uses special reference models for e-government developed in the project "E-LoGo" at university of Potsdam. By recoding traces of mapping annotation to elements in PRM and transforming elements of PRM to elements in CIM using reference models continuous pre-RS traceability can be achieved. The approach uses simple Extensible Stylesheet Language Transformations (XSLT) to create a hypertext documentation that links all relevant elements. Navigating along these links makes it possible for example to start with an annotated element of a law text and follow to all resulting requirements in a CIM. Using the opposite direction it is possible to see for each requirement from which text element of a law it is derived or even if there is no relation to law. By integrating the graphical representation of a model element this navigation can even start directly in a UML diagram. This illustrates that the approach offers vertical and horizontal traceability in forward and backward direction. Besides the obvious use cases continuous pre-requirements specification traceability offers in general (i.e. impact analysis on changes of law and legislation, consider context of a requirements when prioritizing them) is also offers the chance to create a feedback on the consequences of a change in law to existing e-government systems. As long as alternatives and the necessary scope in legislative process are still left, a feedback can be used to choose an alternative with less effort or faster implementation. For federal law it is in Germany since 2011 obligatory to make a similar estimation referred to as achievement effort (“Erfüllungsaufwand”). This work contributes to the first step of making a solid estimation of this kind of effort using pre-RS traceability. KW - Modellgetriebene Architektur KW - Pre-RS Traceability KW - Ontologie KW - semantisches Netz KW - Model Driven Architecture KW - Pre-RS Traceability KW - Ontology KW - Semantic Web Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57478 ER - TY - THES A1 - Sahlmann, Kristina T1 - Network management with semantic descriptions for interoperability on the Internet of Things T1 - Netzwerk Management mit semantischen Beschreibungen für Interoperabilität im Internet der Dinge N2 - The Internet of Things (IoT) is a system of physical objects that can be discovered, monitored, controlled, or interacted with by electronic devices that communicate over various networking interfaces and eventually can be connected to the wider Internet. [Guinard and Trifa, 2016]. IoT devices are equipped with sensors and/or actuators and may be constrained in terms of memory, computational power, network bandwidth, and energy. Interoperability can help to manage such heterogeneous devices. Interoperability is the ability of different types of systems to work together smoothly. There are four levels of interoperability: physical, network and transport, integration, and data. The data interoperability is subdivided into syntactic and semantic data. Semantic data describes the meaning of data and the common understanding of vocabulary e.g. with the help of dictionaries, taxonomies, ontologies. To achieve interoperability, semantic interoperability is necessary. Many organizations and companies are working on standards and solutions for interoperability in the IoT. However, the commercial solutions produce a vendor lock-in. They focus on centralized approaches such as cloud-based solutions. This thesis proposes a decentralized approach namely Edge Computing. Edge Computing is based on the concepts of mesh networking and distributed processing. This approach has an advantage that information collection and processing are placed closer to the sources of this information. The goals are to reduce traffic, latency, and to be robust against a lossy or failed Internet connection. We see management of IoT devices from the network configuration management perspective. This thesis proposes a framework for network configuration management of heterogeneous, constrained IoT devices by using semantic descriptions for interoperability. The MYNO framework is an acronym for MQTT, YANG, NETCONF and Ontology. The NETCONF protocol is the IETF standard for network configuration management. The MQTT protocol is the de-facto standard in the IoT. We picked up the idea of the NETCONF-MQTT bridge, originally proposed by Scheffler and Bonneß[2017], and extended it with semantic device descriptions. These device descriptions provide a description of the device capabilities. They are based on the oneM2M Base ontology and formalized by the Semantic Web Standards. The novel approach is using a ontology-based device description directly on a constrained device in combination with the MQTT protocol. The bridge was extended in order to query such descriptions. Using a semantic annotation, we achieved that the device capabilities are self-descriptive, machine readable and re-usable. The concept of a Virtual Device was introduced and implemented, based on semantic device descriptions. A Virtual Device aggregates the capabilities of all devices at the edge network and contributes therefore to the scalability. Thus, it is possible to control all devices via a single RPC call. The model-driven NETCONF Web-Client is generated automatically from this YANG model which is generated by the bridge based on the semantic device description. The Web-Client provides a user-friendly interface, offers RPC calls and displays sensor values. We demonstrate the feasibility of this approach in different use cases: sensor and actuator scenarios, as well as event configuration and triggering. The semantic approach results in increased memory overhead. Therefore, we evaluated CBOR and RDF HDT for optimization of ontology-based device descriptions for use on constrained devices. The evaluation shows that CBOR is not suitable for long strings and RDF HDT is a promising candidate but is still a W3C Member Submission. Finally, we used an optimized JSON-LD format for the syntax of the device descriptions. One of the security tasks of network management is the distribution of firmware updates. The MYNO Update Protocol (MUP) was developed and evaluated on constrained devices CC2538dk and 6LoWPAN. The MYNO update process is focused on freshness and authenticity of the firmware. The evaluation shows that it is challenging but feasible to bring the firmware updates to constrained devices using MQTT. As a new requirement for the next MQTT version, we propose to add a slicing feature for the better support of constrained devices. The MQTT broker should slice data to the maximum packet size specified by the device and transfer it slice-by-slice. For the performance and scalability evaluation of MYNO framework, we setup the High Precision Agriculture demonstrator with 10 ESP-32 NodeMCU boards at the edge of the network. The ESP-32 NodeMCU boards, connected by WLAN, were equipped with six sensors and two actuators. The performance evaluation shows that the processing of ontology-based descriptions on a Raspberry Pi 3B with the RDFLib is a challenging task regarding computational power. Nevertheless, it is feasible because it must be done only once per device during the discovery process. The MYNO framework was tested with heterogeneous devices such as CC2538dk from Texas Instruments, Arduino Yún Rev 3, and ESP-32 NodeMCU, and IP-based networks such as 6LoWPAN and WLAN. Summarizing, with the MYNO framework we could show that the semantic approach on constrained devices is feasible in the IoT. N2 - Ein Netzwerk von physischen Objekten (Dingen), die von elektronischen Geräten entdeckt, überwacht und gesteuert werden können, die über verschiedene Netzwerkschnittstellen kommunizieren und schließlich mit dem Internet verbunden werden können, bezeichnet man als Internet of Things (Internet der Dinge, IoT) [Guinard und Trifa, 2016]. Die elektronischen Geräte sind mit Sensoren und Aktuatoren ausgestattet und verfügen oft nur über begrenzte Rechenressourcen wie Leistung, Speicher, Netzwerkbandbreite und Energie. Interoperabilität ist die Fähigkeit verschiedener Systemtypen reibungslos zusammenzuarbeiten und kann helfen, heterogenen Geräte im IoT zu verwalten. Die Semantische Interoperabilität stellt sicher, dass die Bedeutung von Daten und das gemeinsame Verständnis des Vokabulars zwischen den Systemen vorhanden ist. Viele Organisationen und Unternehmen arbeiten an Standards und Lösungen für die Interoperabilität im IoT, bieten aber nur Insellösungen an. Die kommerziellen Lösungen führen jedoch zu einer Lieferantenbindung. Sie konzentrieren sich auf zentralisierte Ansätze wie Cloud-basierte Lösungen. Wir verfolgen einen dezentralen Ansatz, nämlich Edge Computing, und sehen die Verwaltung von IoT-Geräten aus der Perspektive des Netzwerkkonfigurationsmanagements. In dieser Arbeit wird ein Framework für das Netzwerkkonfigurationsmanagement heterogener IoT-Geräte mit begrenzten Rechenressourcen unter Verwendung semantischer Beschreibungen für die Interoperabilität vorgestellt. Das MYNO-Framework steht für die verwendeten Technologien MQTT, YANG, NETCONF und Ontologie. Das NETCONF-Protokoll ist der IETF-Standard für das Netzwerkkonfigurations-management und verwendet YANG als Datenmodellierungssprache. Das MQTT-Protokoll ist der De-facto-Standard im IoT. Die semantischen Beschreibungen enthalten eine detaillierte Liste der Gerätefunktionen. Sie basieren auf der oneM2M Base-Ontologie und verwenden Semantic Web Standards. Das Konzept eines Virtuellen Geräts wurde basierend auf den semantischen Gerätebeschreibungen eingeführt und implementiert. Der modellgesteuerte NETCONF Web-Client wird automatisch auf Basis von YANG generiert, das auf Basis der semantischen Gerätebeschreibung erstellt wird. Wir demonstrieren die Machbarkeit des MYNO Ansatzes in verschiedenen Anwendungsfällen: Sensor- und Aktuator-Szenarien sowie Ereigniskonfiguration und -auslösung. Eine der Sicherheitsaufgaben des Netzwerkmanagements ist die Verteilung von Firmware-Updates. Das MYNO Update Protocol (MUP) wurde auf den Geräten CC2538dk und 6LoWPAN Netzwerk entwickelt und evaluiert. Für die Bewertung der Leistung und Skalierbarkeit des MYNO-Frameworks wurde ein Precision Agriculture Demonstrator mit 10 ESP-32 NodeMCU Geräten eingerichtet. Zusammenfassend konnten wir mit dem MYNO-Framework zeigen, dass der semantische Ansatz für Geräte mit limitierten Rechenressourcen im Internet of Things machbar ist. KW - Internet of Things KW - Network Management KW - MQTT KW - Ontology KW - Interoperability KW - Netzwerk Management KW - Interoperabilität KW - Sensornetzwerke KW - Ontologie KW - 6LoWPAN KW - Semantic Web KW - IoT KW - NETCONF KW - oneM2M Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-529846 ER - TY - THES A1 - Linckels, Serge T1 - An e-librarian service : supporting explorative learning by a description logics based semantic retrieval tool T1 - Ein E-Bibliothekar-Dienst : unterstütztes exploratives Lernen durch ein Beschreibungslogik basiertes, semantisches Retrievalwerkzeug N2 - Although educational content in electronic form is increasing dramatically, its usage in an educational environment is poor, mainly due to the fact that there is too much of (unreliable) redundant, and not relevant information. Finding appropriate answers is a rather difficult task being reliant on the user filtering of the pertinent information from the noise. Turning knowledge bases like the online tele-TASK archive into useful educational resources requires identifying correct, reliable, and "machine-understandable" information, as well as developing simple but efficient search tools with the ability to reason over this information. Our vision is to create an E-Librarian Service, which is able to retrieve multimedia resources from a knowledge base in a more efficient way than by browsing through an index, or by using a simple keyword search. In our E-Librarian Service, the user can enter his question in a very simple and human way; in natural language (NL). Our premise is that more pertinent results would be retrieved if the search engine understood the sense of the user's query. The returned results are then logical consequences of an inference rather than of keyword matchings. Our E-Librarian Service does not return the answer to the user's question, but it retrieves the most pertinent document(s), in which the user finds the answer to his/her question. Among all the documents that have some common information with the user query, our E-Librarian Service identifies the most pertinent match(es), keeping in mind that the user expects an exhaustive answer while preferring a concise answer with only little or no information overhead. Also, our E-Librarian Service always proposes a solution to the user, even if the system concludes that there is no exhaustive answer. Our E-Librarian Service was implemented prototypically in three different educational tools. A first prototype is CHESt (Computer History Expert System); it has a knowledge base with 300 multimedia clips that cover the main events in computer history. A second prototype is MatES (Mathematics Expert System); it has a knowledge base with 115 clips that cover the topic of fractions in mathematics for secondary school w.r.t. the official school programme. All clips were recorded mainly by pupils. The third and most advanced prototype is the "Lecture Butler's E-Librarain Service"; it has a Web service interface to respect a service oriented architecture (SOA), and was developed in the context of the Web-University project at the Hasso-Plattner-Institute (HPI). Two major experiments in an educational environment - at the Lycée Technique Esch/Alzette in Luxembourg - were made to test the pertinence and reliability of our E-Librarian Service as a complement to traditional courses. The first experiment (in 2005) was made with CHESt in different classes, and covered a single lesson. The second experiment (in 2006) covered a period of 6 weeks of intensive use of MatES in one class. There was no classical mathematics lesson where the teacher gave explanations, but the students had to learn in an autonomous and exploratory way. They had to ask questions to the E-Librarian Service just the way they would if there was a human teacher. N2 - Obwohl sich die Verfügbarkeit von pädagogischen Inhalten in elektronischer Form stetig erhöht, ist deren Nutzen in einem schulischen Umfeld recht gering. Die Hauptursache dessen ist, dass es zu viele unzuverlässige, redundante und nicht relevante Informationen gibt. Das Finden von passenden Lernobjekten ist eine schwierige Aufgabe, die vom benutzerbasierten Filtern der passenden Informationen abhängig ist. Damit Wissensbanken wie das online Tele-TASK Archiv zu nützlichen, pädagogischen Ressourcen werden, müssen Lernobjekte korrekt, zuverlässig und in maschinenverständlicher Form identifiziert werden, sowie effiziente Suchwerkzeuge entwickelt werden. Unser Ziel ist es, einen E-Bibliothekar-Dienst zu schaffen, der multimediale Ressourcen in einer Wissensbank auf effizientere Art und Weise findet als mittels Navigieren durch ein Inhaltsverzeichnis oder mithilfe einer einfachen Stichwortsuche. Unsere Prämisse ist, dass passendere Ergebnisse gefunden werden könnten, wenn die semantische Suchmaschine den Sinn der Benutzeranfrage verstehen würde. In diesem Fall wären die gelieferten Antworten logische Konsequenzen einer Inferenz und nicht die einer Schlüsselwortsuche. Tests haben gezeigt, dass unser E-Bibliothekar-Dienst unter allen Dokumenten in einer gegebenen Wissensbank diejenigen findet, die semantisch am besten zur Anfrage des Benutzers passen. Dabei gilt, dass der Benutzer eine vollständige und präzise Antwort erwartet, die keine oder nur wenige Zusatzinformationen enthält. Außerdem ist unser System in der Lage, dem Benutzer die Qualität und Pertinenz der gelieferten Antworten zu quantifizieren und zu veranschaulichen. Schlussendlich liefert unser E-Bibliothekar-Dienst dem Benutzer immer eine Antwort, selbst wenn das System feststellt, dass es keine vollständige Antwort auf die Frage gibt. Unser E-Bibliothekar-Dienst ermöglicht es dem Benutzer, seine Fragen in einer sehr einfachen und menschlichen Art und Weise auszudrücken, nämlich in natürlicher Sprache. Linguistische Informationen und ein gegebener Kontext in Form einer Ontologie werden für die semantische Übersetzung der Benutzereingabe in eine logische Form benutzt. Unser E-Bibliothekar-Dienst wurde prototypisch in drei unterschiedliche pädagogische Werkzeuge umgesetzt. In zwei Experimenten wurde in einem pädagogischen Umfeld die Angemessenheit und die Zuverlässigkeit dieser Werkzeuge als Komplement zum klassischen Unterricht geprüft. Die Hauptergebnisse sind folgende: Erstens wurde festgestellt, dass Schüler generell akzeptieren, ganze Fragen einzugeben - anstelle von Stichwörtern - wenn dies ihnen hilft, bessere Suchresultate zu erhalten. Zweitens, das wichtigste Resultat aus den Experimenten ist die Erkenntnis, dass Schuleresultate verbessert werden können, wenn Schüler unseren E-Bibliothekar-Dienst verwenden. Wir haben eine generelle Verbesserung von 5% der Schulresultate gemessen. 50% der Schüler haben ihre Schulnoten verbessert, 41% von ihnen sogar maßgeblich. Einer der Hauptgründe für diese positiven Resultate ist, dass die Schüler motivierter waren und folglich bereit waren, mehr Einsatz und Fleiß in das Lernen und in das Erwerben von neuem Wissen zu investieren. KW - Terminologische Logik KW - Deskriptive Logik KW - Semantische Suche KW - Ontologie KW - e-Learning KW - Semantik Web KW - Description Logics KW - Semantic Search KW - Ontologies KW - e-Learning KW - Semantic Web Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17452 ER -