TY - THES A1 - Knöpfel, Andreas T1 - Konzepte der Beschreibung interaktiver Systeme T1 - Concepts of describing interactive systems N2 - Interaktive System sind dynamische Systeme mit einem zumeist informationellen Kern, die über eine Benutzungsschnittstelle von einem oder mehreren Benutzern bedient werden können. Grundlage für die Benutzung interaktiver Systeme ist das Verständnis von Zweck und Funktionsweise. Allein aus Form und Gestalt der Benutzungsschnittstelle ergibt sich ein solches Verständnis nur in einfachen Fällen. Mit steigender Komplexität ist daher eine verständliche Beschreibung solcher Systeme für deren Entwicklung und Benutzung unverzichtbar. Abhängig von ihrem Zweck variieren die Formen vorgefundener Beschreibungen in der Literatur sehr stark. Ausschlaggebend für die Verständlichkeit einer Beschreibung ist jedoch primär die ihr zugrundeliegende Begriffswelt. Zur Beschreibung allgemeiner komplexer diskreter Systeme - aufbauend auf einer getrennten Betrachtung von Aufbau-, Ablauf- und Wertestrukturen - existiert eine bewährte Begriffswelt. Eine Spezialisierung dieser Begriffs- und Vorstellungswelt, die den unterschiedlichen Betrachtungsebenen interaktiver Systeme gerecht wird und die als Grundlage beliebiger Beschreibungsansätze interaktiver Systeme dienen kann, gibt es bisher nicht. Ziel dieser Arbeit ist die Bereitstellung einer solchen Begriffswelt zur effizienten Kommunikation der Strukturen interaktiver Systeme. Dadurch soll die Grundlage für eine sinnvolle Ergänzung bestehender Beschreibungs- und Entwicklungsansätze geschaffen werden. Prinzipien der Gestaltung von Benutzungsschnittstellen, Usability- oder Ergonomiebetrachtungen stehen nicht im Mittelpunkt der Arbeit. Ausgehend von der informationellen Komponente einer Benutzungsschnittstelle werden drei Modellebenen abgegrenzt, die bei der Betrachtung eines interaktiven Systems zu unterscheiden sind. Jede Modellebene ist durch eine typische Begriffswelt gekennzeichnet, die ihren Ursprung in einer aufbauverwurzelten Vorstellung hat. Der durchgängige Bezug auf eine Systemvorstellung unterscheidet diesen Ansatz von dem bereits bekannten Konzept der Abgrenzung unterschiedlicher Ebenen verschiedenartiger Entwurfsentscheidungen. Die Fundamental Modeling Concepts (FMC) bilden dabei die Grundlage für die Findung und die Darstellung von Systemstrukturen. Anhand bestehender Systembeschreibungen wird gezeigt, wie die vorgestellte Begriffswelt zur Modellfindung genutzt werden kann. Dazu wird eine repräsentative Auswahl vorgefundener Systembeschreibungen aus der einschlägigen Literatur daraufhin untersucht, in welchem Umfang durch sie die Vorstellungswelt dynamischer Systeme zum Ausdruck kommt. Defizite in der ursprünglichen Darstellung werden identifiziert. Anhand von Alternativmodellen zu den betrachteten Systemen wird der Nutzen der vorgestellten Begriffswelt und Darstellungsweise demonstriert. N2 - Interactive systems are dynamic systems which provide services to one or more users via a user interface. Many of these systems have an information processing core. To effectively use such a system, a user needs to know about the purpose and functional concepts of the system. Only in case of a rather simple functionality, the required knowledge is likely to be obtained by mere exploration of the user interface. For complex systems, a comprehensive description is essential for effective and efficient operation, but also for system development. Especially in the context of this publication, the focus is on the diagrams that are used for communication in the development process of interactive systems. With regard to its purpose these descriptions vary in form and notation. In any case, it is the underlying terminology which is crucial to the understandability. Established concepts and notations for the description of generic information processing systems promote a strict separation of three categories of system structures: Compositional structures, behavioral structures and value-range structures. This publication suggests a specialization of this approach for the description of interactive systems. The definition of specific notions and semantic layers is intended to provide a complement to existing description approaches in that field that constitutes a mental framework to enhance the efficiency of communication about interactive systems. In focusing to the description aspect only, design principles, system architectures and development methods are the context but not the subject of this work. The separation of three semantic layers provides the foundation to distinguish purpose-related, interaction-related and implementation-related models of interactive systems. Each semantic layer is characterized by a specific terminology. Referring to the idea of equivalent models, the compositional system structure varies from layer to layer and provides the framework to ask for the observable behavior and values. The strict assignment of system aspects to system components distinguishes this approach from a simple layering of design decisions in the development of interactive systems as commonly found in the relevant literature. The Fundamental Modeling Concepts (FMC) provide the foundation for the identification and representation of system structures. A selection of system descriptions taken from the relevant literature provides the starting point to demonstrate the application of the suggested concept. Purpose, content and form of each example are analyzed with regard to the implied system structure. Weaknesses in the original representation are identified. Alternative models complement the examples to illustrate the benefit of the new approach. KW - Systementwurf KW - Benutzeroberfläche KW - Modellierung KW - Interaktives System KW - Systemstruktur KW - FMC KW - Betrachtungsebenen KW - Interactive system KW - model-driven architecture KW - FMC Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-2898 ER - TY - THES A1 - Dehne, Julian T1 - Möglichkeiten und Limitationen der medialen Unterstützung forschenden Lernens N2 - Forschendes Lernen und die digitale Transformation sind zwei der wichtigsten Einflüsse auf die Entwicklung der Hochschuldidaktik im deutschprachigen Raum. Während das forschende Lernen als normative Theorie das sollen beschreibt, geben die digitalen Werkzeuge, alte wie neue, das können in vielen Bereichen vor. In der vorliegenden Arbeit wird ein Prozessmodell aufgestellt, was den Versuch unternimmt, das forschende Lernen hinsichtlich interaktiver, gruppenbasierter Prozesse zu systematisieren. Basierend auf dem entwickelten Modell wurde ein Softwareprototyp implementiert, der den gesamten Forschungsprozess begleiten kann. Dabei werden Gruppenformation, Feedback- und Reflexionsprozesse und das Peer Assessment mit Bildungstechnologien unterstützt. Die Entwicklungen wurden in einem qualitativen Experiment eingesetzt, um Systemwissen über die Möglichkeiten und Grenzen der digitalen Unterstützung von forschendem Lernen zu gewinnen. N2 - Research-based learning and digital transformation are two of the most important influences on the development of pedagogies of universities in German-speaking countries. While research-based learning as a normative theory explains the should, the digital tools, both old and new, provide the can in many areas. In the present work, a process model was developed, which captures research-based learning with regard to interactive, group-based processes. Based on this model a software prototype was implemented that can accompany the entire research process. Thereby group formation, feedback and reflection processes and peer assessment are supported with educational technology. The developed software was used in a qualitative experiment to gain knowledge about the possibilities and limits of digital support for research-based learning. T2 - Limits and chances of supporting inquiry-based learning with digital media KW - Forschendes Lernen KW - Digitale Medien KW - Modellierung KW - Bildungstechnologien KW - Educational Technologies KW - Digital Media KW - Inquiry-based learning KW - Modelling Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-497894 ER - TY - THES A1 - Höllerer, Reinhard T1 - Modellierung und Optimierung von Bürgerdiensten am Beispiel der Stadt Landshut T1 - Modeling and optimization of civil services on the example of the city of Landshut N2 - Die Projektierung und Abwicklung sowie die statische und dynamische Analyse von Geschäftsprozessen im Bereich des Verwaltens und Regierens auf kommunaler, Länder- wie auch Bundesebene mit Hilfe von Informations- und Kommunikationstechniken beschäftigen Politiker und Strategen für Informationstechnologie ebenso wie die Öffentlichkeit seit Langem. Der hieraus entstandene Begriff E-Government wurde in der Folge aus den unterschiedlichsten technischen, politischen und semantischen Blickrichtungen beleuchtet. Die vorliegende Arbeit konzentriert sich dabei auf zwei Schwerpunktthemen: • Das erste Schwerpunktthema behandelt den Entwurf eines hierarchischen Architekturmodells, für welches sieben hierarchische Schichten identifiziert werden können. Diese erscheinen notwendig, aber auch hinreichend, um den allgemeinen Fall zu beschreiben. Den Hintergrund hierfür liefert die langjährige Prozess- und Verwaltungserfahrung als Leiter der EDV-Abteilung der Stadtverwaltung Landshut, eine kreisfreie Stadt mit rund 69.000 Einwohnern im Nordosten von München. Sie steht als Repräsentant für viele Verwaltungsvorgänge in der Bundesrepublik Deutschland und ist dennoch als Analyseobjekt in der Gesamtkomplexität und Prozessquantität überschaubar. Somit können aus der Analyse sämtlicher Kernabläufe statische und dynamische Strukturen extrahiert und abstrakt modelliert werden. Die Schwerpunkte liegen in der Darstellung der vorhandenen Bedienabläufe in einer Kommune. Die Transformation der Bedienanforderung in einem hierarchischen System, die Darstellung der Kontroll- und der Operationszustände in allen Schichten wie auch die Strategie der Fehlererkennung und Fehlerbehebung schaffen eine transparente Basis für umfassende Restrukturierungen und Optimierungen. Für die Modellierung wurde FMC-eCS eingesetzt, eine am Hasso-Plattner-Institut für Softwaresystemtechnik GmbH (HPI) im Fachgebiet Kommunikationssysteme entwickelte Methodik zur Modellierung zustandsdiskreter Systeme unter Berücksichtigung möglicher Inkonsistenzen (Betreuer: Prof. Dr.-Ing. Werner Zorn [ZW07a, ZW07b]). • Das zweite Schwerpunktthema widmet sich der quantitativen Modellierung und Optimierung von E-Government-Bediensystemen, welche am Beispiel des Bürgerbüros der Stadt Landshut im Zeitraum 2008 bis 2015 durchgeführt wurden. Dies erfolgt auf Basis einer kontinuierlichen Betriebsdatenerfassung mit aufwendiger Vorverarbeitung zur Extrahierung mathematisch beschreibbarer Wahrscheinlichkeitsverteilungen. Der hieraus entwickelte Dienstplan wurde hinsichtlich der erzielbaren Optimierungen im dauerhaften Echteinsatz verifiziert. [ZW07a] Zorn, Werner: «FMC-QE A New Approach in Quantitative Modeling», Vortrag anlässlich: MSV'07- The 2007 International Conference on Modeling, Simulation and Visualization Methods WorldComp2007, Las Vegas, 28.6.2007. [ZW07b] Zorn, Werner: «FMC-QE, A New Approach in Quantitative Modeling», Veröffentlichung, Hasso-Plattner-Institut für Softwaresystemtechnik an der Universität Potsdam, 28.6.2007. N2 - The project development and implementation as well as the static and dynamic analysis of business processes in the context of administration and governance on a municipal, federal state or national level by information and communication technology, has concerned the media along with politicians and strategists for information technology as well as the general public for a long time. The here-from defined term of E-Government has been examined as the focal point of discussion from most diverse technical, political and semantic perspectives. The present work focuses on two main topics: • The first main topic approaches the development of a hierarchical architecture model for which seven hierarchical layers can be identified. These seem to be necessary as well as sufficient to describe the general case. The background is provided by the long-term processual and administrative experience as head of the IT department at the municipality of Landshut, an independent city with 69.000 inhabitants located in the north-east of Munich. It is representative of many administrative processes in the Federal Republic of Germany, but nonetheless still manageable concerning its complexity and quantity of processes. Therefore, static and dynamic structures can be extracted from the analysis of all core workflows and modelled abstractly. The emphases lie on the description of the existing operating procedures in a municipality. The transformation of the operating requirements in a hierarchical system, the modeling of the control and operational states within all layers, as well as the strategy of error recognition and troubleshooting create a transparent basis for extensive restructuring and optimisation. For modeling was used FMC-eCS, a methodology for the description of state discrete systems, developed at the Hasso-Plattner-Institute for Software Systems Engineering (HPI) in the subject area of communication systems. Furthermore inconsistent system statuses are taken into consideration (advisor: Prof. Dr.-Ing. Werner Zorn [ZW02, …, ZW10]). • The second main topic focuses on the quantitative modeling and optimisation of the E-Government process chain at Landshut´s Citizens Advice Bureau (2008 up to 2015). This is based on a continuous data acquisition with sophisticated pre-processing to extract mathematically describable probability distributions. The derivation of a duty roster for actual application and a quality control conclusively verify the developed stochastic method. KW - E-Government KW - Modellierung KW - Optimierung KW - eGovernment KW - modeling KW - optimization Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425986 ER -