TY - THES A1 - Holz, Christian T1 - 3D from 2D touch T1 - 3D von 2D-Berührungen N2 - While interaction with computers used to be dominated by mice and keyboards, new types of sensors now allow users to interact through touch, speech, or using their whole body in 3D space. These new interaction modalities are often referred to as "natural user interfaces" or "NUIs." While 2D NUIs have experienced major success on billions of mobile touch devices sold, 3D NUI systems have so far been unable to deliver a mobile form factor, mainly due to their use of cameras. The fact that cameras require a certain distance from the capture volume has prevented 3D NUI systems from reaching the flat form factor mobile users expect. In this dissertation, we address this issue by sensing 3D input using flat 2D sensors. The systems we present observe the input from 3D objects as 2D imprints upon physical contact. By sampling these imprints at very high resolutions, we obtain the objects' textures. In some cases, a texture uniquely identifies a biometric feature, such as the user's fingerprint. In other cases, an imprint stems from the user's clothing, such as when walking on multitouch floors. By analyzing from which part of the 3D object the 2D imprint results, we reconstruct the object's pose in 3D space. While our main contribution is a general approach to sensing 3D input on 2D sensors upon physical contact, we also demonstrate three applications of our approach. (1) We present high-accuracy touch devices that allow users to reliably touch targets that are a third of the size of those on current touch devices. We show that different users and 3D finger poses systematically affect touch sensing, which current devices perceive as random input noise. We introduce a model for touch that compensates for this systematic effect by deriving the 3D finger pose and the user's identity from each touch imprint. We then investigate this systematic effect in detail and explore how users conceptually touch targets. Our findings indicate that users aim by aligning visual features of their fingers with the target. We present a visual model for touch input that eliminates virtually all systematic effects on touch accuracy. (2) From each touch, we identify users biometrically by analyzing their fingerprints. Our prototype Fiberio integrates fingerprint scanning and a display into the same flat surface, solving a long-standing problem in human-computer interaction: secure authentication on touchscreens. Sensing 3D input and authenticating users upon touch allows Fiberio to implement a variety of applications that traditionally require the bulky setups of current 3D NUI systems. (3) To demonstrate the versatility of 3D reconstruction on larger touch surfaces, we present a high-resolution pressure-sensitive floor that resolves the texture of objects upon touch. Using the same principles as before, our system GravitySpace analyzes all imprints and identifies users based on their shoe soles, detects furniture, and enables accurate touch input using feet. By classifying all imprints, GravitySpace detects the users' body parts that are in contact with the floor and then reconstructs their 3D body poses using inverse kinematics. GravitySpace thus enables a range of applications for future 3D NUI systems based on a flat sensor, such as smart rooms in future homes. We conclude this dissertation by projecting into the future of mobile devices. Focusing on the mobility aspect of our work, we explore how NUI devices may one day augment users directly in the form of implanted devices. N2 - Die Interaktion mit Computern war in den letzten vierzig Jahren stark von Tastatur und Maus geprägt. Neue Arten von Sensoren ermöglichen Computern nun, Eingaben durch Berührungs-, Sprach- oder 3D-Gestensensoren zu erkennen. Solch neuartige Formen der Interaktion werden häufig unter dem Begriff "natürliche Benutzungsschnittstellen" bzw. "NUIs" (englisch natural user interfaces) zusammengefasst. 2D-NUIs ist vor allem auf Mobilgeräten ein Durchbruch gelungen; über eine Milliarde solcher Geräte lassen sich durch Berührungseingaben bedienen. 3D-NUIs haben sich jedoch bisher nicht auf mobilen Plattformen durchsetzen können, da sie Nutzereingaben vorrangig mit Kameras aufzeichnen. Da Kameras Bilder jedoch erst ab einem gewissen Abstand auflösen können, eignen sie sich nicht als Sensor in einer mobilen Plattform. In dieser Arbeit lösen wir dieses Problem mit Hilfe von 2D-Sensoren, von deren Eingaben wir 3D-Informationen rekonstruieren. Unsere Prototypen zeichnen dabei die 2D-Abdrücke der Objekte, die den Sensor berühren, mit hoher Auflösung auf. Aus diesen Abdrücken leiten sie dann die Textur der Objekte ab. Anhand der Stelle der Objektoberfläche, die den Sensor berührt, rekonstruieren unsere Prototypen schließlich die 3D-Ausrichtung des jeweiligen Objektes. Neben unserem Hauptbeitrag der 3D-Rekonstruktion stellen wir drei Anwendungen unserer Methode vor. (1) Wir präsentieren Geräte, die Berührungseingaben dreimal genauer als existierende Geräte messen und damit Nutzern ermöglichen, dreimal kleinere Ziele zuverlässig mit dem Finger auszuwählen. Wir zeigen dabei, dass sowohl die Haltung des Fingers als auch der Benutzer selbst einen systematischen Einfluss auf die vom Sensor gemessene Position ausübt. Da existierende Geräte weder die Haltung des Fingers noch den Benutzer erkennen, nehmen sie solche Variationen als Eingabeungenauigkeit wahr. Wir stellen ein Modell für Berührungseingabe vor, das diese beiden Faktoren integriert, um damit die gemessenen Eingabepositionen zu präzisieren. Anschließend untersuchen wir, welches mentale Modell Nutzer beim Berühren kleiner Ziele mit dem Finger anwenden. Unsere Ergebnisse deuten auf ein visuelles Modell hin, demzufolge Benutzer Merkmale auf der Oberfläche ihres Fingers an einem Ziel ausrichten. Bei der Analyse von Berührungseingaben mit diesem Modell verschwinden nahezu alle zuvor von uns beobachteten systematischen Effekte. (2) Unsere Prototypen identifizieren Nutzer anhand der biometrischen Merkmale von Fingerabdrücken. Unser Prototyp Fiberio integriert dabei einen Fingerabdruckscanner und einen Bildschirm in die selbe Oberfläche und löst somit das seit Langem bestehende Problem der sicheren Authentifizierung auf Berührungsbildschirmen. Gemeinsam mit der 3D-Rekonstruktion von Eingaben ermöglicht diese Fähigkeit Fiberio, eine Reihe von Anwendungen zu implementieren, die bisher den sperrigen Aufbau aktueller 3D-NUI-Systeme voraussetzten. (3) Um die Flexibilität unserer Methode zu zeigen, implementieren wir sie auf einem großen, berührungsempfindlichen Fußboden, der Objekttexturen bei der Eingabe ebenfalls mit hoher Auflösung aufzeichnet. Ähnlich wie zuvor analysiert unser System GravitySpace diese Abdrücke, um Nutzer anhand ihrer Schuhsolen zu identifizieren, Möbelstücke auf dem Boden zu erkennen und Nutzern präzise Eingaben mittels ihrer Schuhe zu ermöglichen. Indem GravitySpace alle Abdrücke klassifiziert, erkennt das System die Körperteile der Benutzer, die sich in Kontakt mit dem Boden befinden. Aus der Anordnung dieser Kontakte schließt GravitySpace dann auf die Körperhaltungen aller Benutzer in 3D. GravitySpace hat daher das Potenzial, Anwendungen für zukünftige 3D-NUI-Systeme auf einer flachen Oberfläche zu implementieren, wie zum Beispiel in zukünftigen intelligenten Wohnungen. Wie schließen diese Arbeit mit einem Ausblick auf zukünftige interaktive Geräte. Dabei konzentrieren wir uns auf den Mobilitätsaspekt aktueller Entwicklungen und beleuchten, wie zukünftige mobile NUI-Geräte Nutzer in Form implantierter Geräte direkt unterstützen können. KW - HCI KW - Berührungseingaben KW - Eingabegenauigkeit KW - Modell KW - Mobilgeräte KW - HCI KW - touch input KW - input accuracy KW - model KW - mobile devices Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67796 ER - TY - THES A1 - Mueller, Stefanie T1 - Interacting with personal fabrication devices T1 - Interaktion mit Personal Fabrication Geräten N2 - Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions. In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well. We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms. By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output. By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time. We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright. N2 - Personal Fabrication Geräte, wie zum Beispiel 3D Drucker, sind dabei eine Zukunft zu ermöglichen in der selbst Benutzer ohne technisches Fachwissen eigene Objekte erstellen können. Obwohl die Hardware nun verfügbar ist, gibt es derzeit kein geeignetes Interaktionsmodel für Benutzer ohne Fachwissen. Heutzutage werden Objekte mit dem 3D Drucker in einem Stück hergestellt. Da der 3D Druck noch ein sehr langsames Verfahren ist und häufig so lange dauert, dass das Objekt über Nacht hergestellt werden muss, müssen Benutzer sorgfältig alles überprüfen bevor sie den Druckauftrag abschicken, da jeder Fehler einen weiteren Tag Wartezeit bedeuten kann. Benutzer ohne technischen Hintergrund haben jedoch nicht das notwendige Fachwissen um alle Faktoren vorhersagen zu können. In dieser Dissertation schlagen wir vor das Interaktionsmodel von Personal Fabrication Geräten zu ändern, um diese Benutzer besser zu unterstützen. Wir argumentieren, dass die Entwicklung von Personal Fabrication Geräten der Entwicklung von Personal Computern gleicht. Die ersten Computer arbeiteten ein Programm vollständig ab, bevor sie ein Ergebnis an den Benutzer zurückgaben. Durch die Verkleinerung der Interaktionseinheit von ganzen Programmen zu einzelnen Anfragen wurden turn-taking Systeme wie die Kommandozeile möglich. Mit der Einführung von direkter Manipulation konnten Benutzer schließlich kontinuierlich mit dem Program arbeiten: sie erhielten Feedback über jede einzelne Interaktion in Echtzeit. Wir untersuchen in dieser Arbeit ob die gleichen Interaktionskonzepte auf Personal Fabrication Geräte angewendet werden können. Wir beginnen diese Arbeit damit zu untersuchen wie man die Feedbackzeit bei der Interaktion mit ganzen Objekten verkürzen kann. Wir präsentieren eine Methode mit dem Namen Low-fidelity Fabrication, die bis zu 90% Druckzeit spart. Low-fidelity fabrication ist schnell, weil es 3D Modelle als grobe Vorschauobjekte druckt, die aber ausreichen um die Aspekte zu testen, die gerade wichtig sind. Abhängig vom aktuellen Testfokus schlagen wir vor verschiedene Konvertierungen vorzunehmen: Unser System faBrickator ist besonders für die ersten Testläufe geeignet, wenn ein modulares Design wichtig ist. Unser System WirePrint ist besonders nützlich im nächsten Schritt, wenn die Form des Objektes erhalten bleiben soll. Am Ende erlaubt unser System Platener ein Objekt so zu konvertieren, dass die technische Funktion des Objektes bewahrt wird. Wir erklären das Design unserer interaktiven Editoren und die zugrunde liegenden Konvertierungsalgorithmen. Durch die Verkleinerung der Interaktionseinheit auf ein einzelnes Element, wie zum Beispiel einer Linie, untersuchen wir wie man Objekt-basierte Fabrikationssysteme in turn-taking Systeme umwandeln kann. Wir zeigen unser 2D System constructable, das auf einem Laser-Cutter basiert. Benutzer von constructable verwenden einen Laserpointer um auf das Werkstück im Laser-Cutter zu zeichnen. Die Zeichnung wird mit einer Kamera aufgenommen, korrigiert, und anschließend direkt mit dem Laser-Cutter ausgeschnitten. Wir erweitern constructable zu 3D mit unserer neuen Laser-Cutter Technologie Laser-Origami. LaserOrigami erzeugt 3D Objekte, indem es mit dem defokussierten Laser das Werkstück erhitzt bis es verformbar wird, die Schwerkraft biegt das Werkstück anschließend in seine 3D Form. Obwohl constructable und LaserOrigami physisches Feedback schnell erzeugen, ist die Interaktion dennoch am besten als turn-taking zu beschreiben: Benutzer editieren zuerst und sehen danach das Ergebnis. Indem wir die Interaktionseinheit noch einmal verkleinern, nun auf ein einziges Feature, können wir Echtzeitfabrikation erreichen: Benutzereingabe und physisches Feedback sind so eng miteinander verbunden, dass es keine sichtbare Verzögerung mehr gibt. Damit können wir untersuchen, was es bedeutet von turn-taking Systemen zu direkter Manipulation überzugehen. Wir zeigen ein System mit dem Namen FormFab, das solch eine direkte interaktive Kontrolle ermöglicht. FormFab basiert auf dem gleichen Prinzip wie LaserOrigami: Ein Werkstück wird erhitzt bis es verformbar wird. Allerdings verwendet FormFab nicht die Schwerkraft zum verformen, sondern ein pneumatisches System, das Benutzer interaktiv steuern können. Wenn Benutzer den Luftdruck ändern, sehen sie wie sich die Größe der Form in Echtzeit ändert. Dies erlaubt ihnen die beste Entscheidung zu treffen während sie verschiedene Optionen evaluieren. Im letzten Kapitel dieser Dissertation extrapolieren wir die aktuelle Entwicklung in eine Zukunft in der eine große Anzahl von Personen eigene Objekte herstellen werden. Dabei entstehen zwei neue Herausforderungen: Nachhaltigkeit und das Bewahren von intellektuellem Eigentum. KW - human computer interaction KW - 3D printing KW - 3D Drucken KW - Laser Cutten KW - Interaktionsmodel Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100908 ER - TY - JOUR A1 - Brewka, Gerhard A1 - Ellmauthaler, Stefan A1 - Kern-Isberner, Gabriele A1 - Obermeier, Philipp A1 - Ostrowski, Max A1 - Romero, Javier A1 - Schaub, Torsten H. A1 - Schieweck, Steffen T1 - Advanced solving technology for dynamic and reactive applications JF - Künstliche Intelligenz Y1 - 2018 U6 - https://doi.org/10.1007/s13218-018-0538-8 SN - 0933-1875 SN - 1610-1987 VL - 32 IS - 2-3 SP - 199 EP - 200 PB - Springer CY - Heidelberg ER - TY - CHAP A1 - Desel, Jörg A1 - Opel, Simone A1 - Siegeris, Juliane A1 - Draude, Claude A1 - Weber, Gerhard A1 - Schell, Timon A1 - Schwill, Andreas A1 - Thorbrügge, Carsten A1 - Schäfer, Len Ole A1 - Netzer, Cajus Marian A1 - Gerstenberger, Dietrich A1 - Winkelnkemper, Felix A1 - Schulte, Carsten A1 - Böttcher, Axel A1 - Thurner, Veronika A1 - Häfner, Tanja A1 - Ottinger, Sarah A1 - Große-Bölting, Gregor A1 - Scheppach, Lukas A1 - Mühling, Andreas A1 - Baberowski, David A1 - Leonhardt, Thiemo A1 - Rentsch, Susanne A1 - Bergner, Nadine A1 - Bonorden, Leif A1 - Stemme, Jonas A1 - Hoppe, Uwe A1 - Weicker, Karsten A1 - Bender, Esther A1 - Barbas, Helena A1 - Hamann, Fabian A1 - Soll, Marcus A1 - Sitzmann, Daniel ED - Desel, Jörg ED - Opel, Simone ED - Siegeris, Juliane T1 - Hochschuldidaktik Informatik HDI 2021 BT - 9. Fachtagung des GI-Fachbereichs Informatik und Ausbildung/Didaktik der Informatik 15.–16. September 2021 in Dortmund T2 - Commentarii informaticae didacticae N2 - Die Fachtagungen HDI (Hochschuldidaktik Informatik) beschäftigen sich mit den unterschiedlichen Aspekten informatischer Bildung im Hochschulbereich. Neben den allgemeinen Themen wie verschiedenen Lehr- und Lernformen, dem Einsatz von Informatiksystemen in der Hochschullehre oder Fragen der Gewinnung von geeigneten Studierenden, deren Kompetenzerwerb oder auch der Betreuung der Studierenden widmet sich die HDI immer auch einem Schwerpunktthema. Im Jahr 2021 war dies die Berücksichtigung von Diversität in der Lehre. Diskutiert wurden beispielsweise die Einbeziehung von besonderen fachlichen und überfachlichen Kompetenzen Studierender, der Unterstützung von Durchlässigkeit aus nichtakademischen Berufen, aber auch die Gestaltung inklusiver Lehr- und Lernszenarios, Aspekte des Lebenslangen Lernens oder sich an die Diversität von Studierenden adaptierte oder adaptierende Lehrsysteme. Dieser Band enthält ausgewählte Beiträge der 9. Fachtagung 2021, die in besonderer Weise die Konferenz und die dort diskutierten Themen repräsentieren. T3 - Commentarii informaticae didacticae (CID) - 13 KW - Hochschuldidaktik KW - Informatikdidaktik KW - HDI KW - Hochschullehre KW - digitale Hochschullehre KW - Diversität KW - Heterogenität KW - Lebenslanges Lernen KW - Informatikstudium KW - Didaktische Konzepte KW - Assessment Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565070 SN - 978-3-86956-548-4 SN - 1868-0844 SN - 2191-1940 IS - 13 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Hawro, Tomasz A1 - Przybylowicz, Katarzyna A1 - Spindler, Max A1 - Hawro, Marlena A1 - Steć, Michał A1 - Altrichter, Sabine A1 - Weller, Karsten A1 - Magerl, Markus A1 - Reidel, Ulrich A1 - Alarbeed, Ezzat A1 - Alraboni, Ola A1 - Maurer, Marcus A1 - Metz, Martin T1 - The characteristics and impact of pruritus in adult dermatology patients BT - a prospective, cross-sectional study JF - Journal of the American Academy of Dermatology N2 - Background: Pruritus often accompanies chronic skin diseases, exerting considerable burden on many areas of patient functioning; this burden and the features of pruritus remain insufficiently characterized. Objective: To investigate characteristics, including localization patterns, and burden of pruritus in patients with chronic dermatoses. Methods: We recruited 800 patients with active chronic skin diseases. We assessed pruritus intensity, localization, and further characteristics. We used validated questionnaires to assess quality of life, work productivity and activity impairment, anxiety, depression, and sleep quality. Results: Nine out of every 10 patients had experienced pruritus throughout their disease and 73% in the last 7 days. Pruritus often affected the entire body and was not restricted to skin lesions. Patients with moderate to severe pruritus reported significantly more impairment to their sleep quality and work productivity, and they were more depressed and anxious than control individuals and patients with mild or no pruritus. Suicidal ideations were highly prevalent in patients with chronic pruritus (18.5%) and atopic dermatitis (11.8%). Conclusions: Pruritus prevalence and intensity are very high across all dermatoses studied; intensity is linked to impairment in many areas of daily functioning. Effective treatment strategies are urgently required to treat pruritus and the underlying skin disease. ( J Am Acad Dermatol 2021;84:691-700.) KW - activity KW - anxiety KW - depression KW - pruritus KW - quality of life KW - sleep quality KW - suicidal ideations KW - work productivity Y1 - 2021 U6 - https://doi.org/10.1016/J.JAAD.2020.08.035 SN - 0190-9622 SN - 1097-6787 VL - 84 IS - 3 SP - 691 EP - 700 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Luther, Laura A1 - Tiberius, Victor A1 - Brem, Alexander T1 - User experience (UX) in business, management, and psychology BT - a bibliometric mapping of the current state of research JF - Multimodal technologies and interaction : open access journal N2 - User Experience (UX) describes the holistic experience of a user before, during, and after interaction with a platform, product, or service. UX adds value and attraction to their sole functionality and is therefore highly relevant for firms. The increased interest in UX has produced a vast amount of scholarly research since 1983. The research field is, therefore, complex and scattered. Conducting a bibliometric analysis, we aim at structuring the field quantitatively and rather abstractly. We employed citation analyses, co-citation analyses, and content analyses to evaluate productivity and impact of extant research. We suggest that future research should focus more on business and management related topics. KW - bibliometric analysis KW - co-citation analysis KW - co-occurrence analysis KW - citation analysis KW - user experience KW - UX Y1 - 2020 U6 - https://doi.org/10.3390/mti4020018 SN - 2414-4088 VL - 4 IS - 2 PB - MDPI CY - Basel ER - TY - JOUR A1 - Banbara, Mutsunori A1 - Soh, Takehide A1 - Tamura, Naoyuki A1 - Inoue, Katsumi A1 - Schaub, Torsten H. T1 - Answer set programming as a modeling language for course timetabling JF - Theory and practice of logic programming N2 - The course timetabling problem can be generally defined as the task of assigning a number of lectures to a limited set of timeslots and rooms, subject to a given set of hard and soft constraints. The modeling language for course timetabling is required to be expressive enough to specify a wide variety of soft constraints and objective functions. Furthermore, the resulting encoding is required to be extensible for capturing new constraints and for switching them between hard and soft, and to be flexible enough to deal with different formulations. In this paper, we propose to make effective use of ASP as a modeling language for course timetabling. We show that our ASP-based approach can naturally satisfy the above requirements, through an ASP encoding of the curriculum-based course timetabling problem proposed in the third track of the second international timetabling competition (ITC-2007). Our encoding is compact and human-readable, since each constraint is individually expressed by either one or two rules. Each hard constraint is expressed by using integrity constraints and aggregates of ASP. Each soft constraint S is expressed by rules in which the head is the form of penalty (S, V, C), and a violation V and its penalty cost C are detected and calculated respectively in the body. We carried out experiments on four different benchmark sets with five different formulations. We succeeded either in improving the bounds or producing the same bounds for many combinations of problem instances and formulations, compared with the previous best known bounds. KW - answer set programming KW - educational timetabling KW - course timetabling Y1 - 2013 U6 - https://doi.org/10.1017/S1471068413000495 SN - 1471-0684 VL - 13 IS - 2 SP - 783 EP - 798 PB - Cambridge Univ. Press CY - New York ER - TY - GEN A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana A1 - Steffen, Bernhard T1 - Bio-jETI : a framework for semantics-based service composition N2 - Background: The development of bioinformatics databases, algorithms, and tools throughout the last years has lead to a highly distributedworld of bioinformatics services. Without adequatemanagement and development support, in silico researchers are hardly able to exploit the potential of building complex, specialized analysis processes from these services. The Semantic Web aims at thoroughly equipping individual data and services with machine-processable meta-information, while workflow systems support the construction of service compositions. However, even in this combination, in silico researchers currently would have to deal manually with the service interfaces, the adequacy of the semantic annotations, type incompatibilities, and the consistency of service compositions. Results: In this paper, we demonstrate by means of two examples how Semantic Web technology together with an adequate domain modelling frees in silico researchers from dealing with interfaces, types, and inconsistencies. In Bio-jETI, bioinformatics services can be graphically combined to complex services without worrying about details of their interfaces or about type mismatches of the composition. These issues are taken care of at the semantic level by Bio-jETI’s model checking and synthesis features. Whenever possible, they automatically resolve type mismatches in the considered service setting. Otherwise, they graphically indicate impossible/incorrect service combinations. In the latter case, the workflow developermay either modify his service composition using semantically similar services, or ask for help in developing the missing mediator that correctly bridges the detected type gap. Newly developed mediators should then be adequately annotated semantically, and added to the service library for later reuse in similar situations. Conclusion: We show the power of semantic annotations in an adequately modelled and semantically enabled domain setting. Using model checking and synthesis methods, users may orchestrate complex processes from a wealth of heterogeneous services without worrying about interfaces and (type) consistency. The success of this method strongly depends on a careful semantic annotation of the provided services and on its consequent exploitation for analysis, validation, and synthesis. We are convinced that these annotations will become standard, as they will become preconditions for the success and widespread use of (preferred) services in the Semantic Web T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 136 KW - European Bioinformatics Institute KW - Integration KW - Tool KW - Alignment KW - Workflow Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45066 ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana A1 - Steffen, Bernhard ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - Modeling and Execution of Scientific Workflows with the jABC Framework JF - Process Design for Natural Scientists: an agile model-driven approach N2 - We summarize here the main characteristics and features of the jABC framework, used in the case studies as a graphical tool for modeling scientific processes and workflows. As a comprehensive environment for service-oriented modeling and design according to the XMDD (eXtreme Model-Driven Design) paradigm, the jABC offers much more than the pure modeling capability. Associated technologies and plugins provide in fact means for a rich variety of supporting functionality, such as remote service integration, taxonomical service classification, model execution, model verification, model synthesis, and model compilation. We describe here in short both the essential jABC features and the service integration philosophy followed in the environment. In our work over the last years we have seen that this kind of service definition and provisioning platform has the potential to become a core technology in interdisciplinary service orchestration and technology transfer: Domain experts, like scientists not specially trained in computer science, directly define complex service orchestrations as process models and use efficient and complex domain-specific tools in a simple and intuitive way. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 14 EP - 29 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - Scientific Workflows and XMDD JF - Process Design for Natural Scientists: an agile model-driven approach N2 - A major part of the scientific experiments that are carried out today requires thorough computational support. While database and algorithm providers face the problem of bundling resources to create and sustain powerful computation nodes, the users have to deal with combining sets of (remote) services into specific data analysis and transformation processes. Today’s attention to “big data” amplifies the issues of size, heterogeneity, and process-level diversity/integration. In the last decade, especially workflow-based approaches to deal with these processes have enjoyed great popularity. This book concerns a particularly agile and model-driven approach to manage scientific workflows that is based on the XMDD paradigm. In this chapter we explain the scope and purpose of the book, briefly describe the concepts and technologies of the XMDD paradigm, explain the principal differences to related approaches, and outline the structure of the book. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 1 EP - 13 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Wickert, Alexander A1 - Margaria, Tiziana ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - Lessons Learned JF - Process Design for Natural Scientists: an agile model-driven approach N2 - This chapter summarizes the experience and the lessons we learned concerning the application of the jABC as a framework for design and execution of scientific workflows. It reports experiences from the domain modeling (especially service integration) and workflow design phases and evaluates the resulting models statistically with respect to the SIB library and hierarchy levels. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 45 EP - 64 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Wickert, Alexander ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - The Course's SIB Libraries JF - Process Design for Natural Scientists: an agile model-driven approach N2 - This chapter gives a detailed description of the service framework underlying all the example projects that form the foundation of this book. It describes the different SIB libraries that we made available for the course “Process modeling in the natural sciences” to provide the functionality that was required for the envisaged applications. The students used these SIB libraries to realize their projects. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 30 EP - 44 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana ED - Lamprecht, Anna-Lena ED - Margaria, Tiziana T1 - Scientific workflows and XMDD JF - Process design for natural scientists Y1 - 2015 SN - 978-3-662-45006-2 SP - 1 EP - 13 PB - Springer CY - Berlin ER - TY - JOUR A1 - Naujokat, Stefan A1 - Neubauer, Johannes A1 - Lamprecht, Anna-Lena A1 - Steffen, Bernhard A1 - Joerges, Sven A1 - Margaria, Tiziana T1 - Simplicity-first model-based plug-in development JF - Software : practice & experience N2 - In this article, we present our experience with over a decade of strict simplicity orientation in the development and evolution of plug-ins. The point of our approach is to enable our graphical modeling framework jABC to capture plug-in development in a domain-specific setting. The typically quite tedious and technical plug-in development is shifted this way from a programming task to the modeling level, where it can be mastered also by application experts without programming expertise. We show how the classical plug-in development profits from a systematic domain-specific API design and how the level of abstraction achieved this way can be further enhanced by defining adequate building blocks for high-level plug-in modeling. As the resulting plug-in models can be compiled and deployed automatically, our approach decomposes plug-in development into three phases where only the realization phase requires plug-in-specific effort. By using our modeling framework jABC, this effort boils down to graphical, tool-supported process modeling. Furthermore, we support the automatic completion of process sketches for executability. All this will be illustrated along the most recent plug-in-based evolution of the jABC framework, which witnessed quite some bootstrapping effects. KW - plug-ins KW - simplicity KW - domain-specific APIs KW - process modeling KW - bootstrapping KW - evolution KW - code generation KW - loose programming KW - dynamic service binding Y1 - 2014 U6 - https://doi.org/10.1002/spe.2243 SN - 0038-0644 SN - 1097-024X VL - 44 IS - 3 SP - 277 EP - 297 PB - Wiley-Blackwell CY - Hoboken ER - TY - BOOK A1 - Lamprecht, Anna-Lena A1 - Magaria, Tiziana A1 - Steffen, Bernhard A1 - Sczyrba, Alexander A1 - Hartmeier, Sven A1 - Giegerich, Robert T1 - GeneFisher-P BT - Variations of GneFisher as Process in Bio jETI - (part of "From Components to Processes") T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 2007 SN - 0946-7580 VL - 2007, 3 PB - Univ. CY - Potsdam ER - TY - THES A1 - Schröter, Alexander T1 - Erstellung und Evaluation eines Fragebogens zur Erfassung von komplexen Interaktionssituationen in Software-Entwicklungsprojekten T1 - Creation and evaluation of a questionnaire for recording complex interaction situations in software development projects N2 - Die fortschreitende Digitalisierung durchzieht immer mehr Lebensbereiche und führt zu immer komplexeren sozio-technischen Systemen. Obwohl diese Systeme zur Lebenserleichterung entwickelt werden, können auch unerwünschte Nebeneffekte entstehen. Ein solcher Nebeneffekt könnte z.B. die Datennutzung aus Fitness-Apps für nachteilige Versicherungsentscheidungen sein. Diese Nebeneffekte manifestieren sich auf allen Ebenen zwischen Individuum und Gesellschaft. Systeme mit zuvor unerwarteten Nebeneffekten können zu sinkender Akzeptanz oder einem Verlust von Vertrauen führen. Da solche Nebeneffekte oft erst im Gebrauch in Erscheinung treten, bedarf es einer besonderen Betrachtung bereits im Konstruktionsprozess. Mit dieser Arbeit soll ein Beitrag geleistet werden, um den Konstruktionsprozess um ein geeignetes Hilfsmittel zur systematischen Reflexion zu ergänzen. In vorliegender Arbeit wurde ein Analysetool zur Identifikation und Analyse komplexer Interaktionssituationen in Software-Entwicklungsprojekten entwickelt. Komplexe Interaktionssituationen sind von hoher Dynamik geprägt, aus der eine Unvorhersehbarkeit der Ursache-Wirkungs-Beziehungen folgt. Hierdurch können die Akteur*innen die Auswirkungen der eigenen Handlungen nicht mehr überblicken, sondern lediglich im Nachhinein rekonstruieren. Hieraus können sich fehlerhafte Interaktionsverläufe auf vielfältigen Ebenen ergeben und oben genannte Nebeneffekte entstehen. Das Analysetool unterstützt die Konstrukteur*innen in jeder Phase der Entwicklung durch eine angeleitete Reflexion, um potenziell komplexe Interaktionssituationen zu antizipieren und ihnen durch Analyse der möglichen Ursachen der Komplexitätswahrnehmung zu begegnen. Ausgehend von der Definition für Interaktionskomplexität wurden Item-Indikatoren zur Erfassung komplexer Interaktionssituationen entwickelt, die dann anhand von geeigneten Kriterien für Komplexität analysiert werden. Das Analysetool ist als „Do-It-Yourself“ Fragebogen mit eigenständiger Auswertung aufgebaut. Die Genese des Fragebogens und die Ergebnisse der durchgeführten Evaluation an fünf Softwarentwickler*innen werden dargestellt. Es konnte festgestellt werden, dass das Analysetool bei den Befragten als anwendbar, effektiv und hilfreich wahrgenommen wurde und damit eine hohe Akzeptanz bei der Zielgruppe genießt. Dieser Befund unterstützt die gute Einbindung des Analysetools in den Software-Entwicklungsprozess. N2 - Advancing digitalization is permeating more and more areas of life and leading to increasingly complex socio-technical systems. Although these systems are being developed to make life easier, undesirable side effects can also arise. One such side effect could be, for example, the use of data from fitness apps for adverse insurance decisions. These side effects manifest themselves at all levels between the individual and society. Systems with previously unexpected side effects can lead to a decline in acceptance or a loss of trust. Since such side effects often only become apparent during use, special consideration is required during the design process. This work is intended to make a contribution to supplementing the design process with a suitable tool for systematic reflection. In this thesis, an analysis tool was developed to identify and analyze complex interaction situations in software development projects. Complex interaction situations are characterized by high dynamics, resulting in unpredictability of cause-effect relationships. As a result, the actors are no longer able to oversee the effects of their own actions, but can only reconstruct them in retrospect. This can result in incorrect interaction processes on many levels and the side effects mentioned above. The analysis tool supports the designers in each phase of development through guided reflection in order to anticipate potentially complex interaction situations and to counter them by analyzing the possible causes of the perception of complexity. Based on the definition of interaction complexity, item indicators were developed to capture complex interaction situations, which are then analyzed using suitable criteria for complexity. The analysis tool is structured as a "do-it-yourself" questionnaire with independent evaluation. The genesis of the questionnaire and the results of the evaluation carried out on five software developers are presented. It was found that the analysis tool was perceived by the respondents as applicable, effective and helpful and thus enjoys a high level of acceptance among the target group. This finding supports the good integration of the analysis tool into the software development process. KW - Komplexität KW - sozio-technisches System KW - Softwareentwicklung KW - Mensch-Technik-Interaktion KW - Methodik KW - complexity KW - socio-technical system KW - software development KW - human-technology interaction KW - methodology Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-631873 ER - TY - JOUR A1 - Marco Figuera, Ramiro A1 - Riedel, Christian A1 - Rossi, Angelo Pio A1 - Unnithan, Vikram T1 - Depth to diameter analysis on small simple craters at the lunar south pole - possible implications for ice harboring JF - Remote sensing N2 - In this paper, we present a study comparing the depth to diameter (d/D) ratio of small simple craters (200-1000 m) of an area between -88.5 degrees to -90 degrees latitude at the lunar south pole containing Permanent Shadowed Regions (PSRs) versus craters without PSRs. As PSRs can reach temperatures of 110 K and are capable of harboring volatiles, especially water ice, we analyzed the relationship of depth versus diameter ratios and its possible implications for harboring water ice. Variations in the d/D ratios can also be caused by other processes such as degradation, isostatic adjustment, or differences in surface properties. The conducted d/D ratio analysis suggests that a differentiation between craters containing PSRs versus craters without PSRs occurs. Thus, a possible direct relation between d/D ratio, PSRs, and water ice harboring might exist. Our results suggest that differences in the target's surface properties may explain the obtained results. The resulting d/D ratios of craters with PSRs can help to select target areas for future In-Situ Resource Utilization (ISRU) missions. KW - craters KW - lunar exploration KW - ice harboring Y1 - 2022 U6 - https://doi.org/10.3390/rs14030450 SN - 2072-4292 VL - 14 IS - 3 PB - MDPI CY - Basel ER - TY - JOUR A1 - Lucke, Ulrike A1 - Hafer, Jörg A1 - Hartmann, Niklas T1 - Strategieentwicklung in der Hochschule als partizipativer Prozess BT - Beispiele und Erkenntnisse JF - Potsdamer Beiträge zur Hochschulforschung N2 - Die Setzung strategischer Ziele sowie die Zuordnung und Umsetzung dazugehörender Maßnahmen sind ein wesentliches Element, um die Innovationsfähigkeit von Organisationen zu erhalten. In den vergangenen Jahren ist auch an Hochschulen die Strategiebildung deutlich vorangetrieben worden. Dies betrifft verschiedene Handlungsfelder, und es werden verschiedene Ansätze verfolgt. Der vorliegende Beitrag greift am Beispiel der Universität Potsdam drei in den vergangenen Jahren adressierte Strategiebereiche heraus: IT, E-Learning und Forschungsdaten. Die damit verbundenen Prozesse waren in unterschiedlichem Maß von Partizipation geprägt. Die gesammelten Erfahrungen werden reflektiert, und es werden Empfehlungen für Strategieentwicklungsprozesse abgeleitet. KW - Innovation KW - Strategie KW - Partizipation KW - IT-Infrastruktur KW - E-Learning KW - Forschungsdatenmanagement Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-492764 SN - 978-3-86956-498-2 SN - 2192-1075 SN - 2192-1083 IS - 6 SP - 99 EP - 117 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Jiang, Chunyan T1 - Multi-visualization and hybrid segmentation approaches within telemedicine framework T1 - Multi-Visualisierung und hybride Segmentierungsansätze auf dem Gebiet der Telemedizin N2 - The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension. N2 - Innovative Informationstechnologien haben viele Bereiche unseres Lebens verändert. Im Gesundheitsbereich ist es mittels Computer möglich, qualitativ hochwertige und große volumetrische Bilddaten zu verwalten, zu verarbeiten und dadurch die medizinische Betreuung zu unterstützen. In dieser Dissertation stelle ich verschiedene Methoden vor, die Mediziner beim Prozess der Beobachtung, Verarbeitung und Nutzung von Bilddaten verstärkt unterstützten können. Meine Forschungsarbeit befasst sich mit drei Schwerpunktthemen: Telemedizinintegration, Visualisierung von medizinischen Bildern und Bildsegmentierung. Zur Demonstration der Machbarkeit der vorgeschlagenen Methoden implementierte ich zudem eine Anwendungssoftware. Das entwickelte System kann in punkto Telemedizinintegration nicht nur Dateien im DICOM Format lesen und schreiben, sondern auch nicht-standardisierte Dateien reparieren. In meiner Arbeit gebe ich außerdem einen Vorschlag für eine Erweiterung des DICOM Standards für die Speicherung von 3D Bildinformationen. Zur Darstellung der Bilddaten wurden in dem entwickelten System drei verschiedene Ansichten implementiert: Volumen Ansicht, Oberflächen Ansicht sowie Querschnitt Ansicht. Ein Großteil meiner Arbeit ist der Vorschlag eines neuen hybriden Bildsegmentierungsansatzes. Durch das neu vorgeschlagene Verfahren können komplexe neurale MRI Daten effizient und präzise segmentiert werden. Zusätzlich wird der manuelle Arbeitsaufwand der Experten drastisch verringert. KW - medizinisch KW - bild KW - Segmentierung KW - medical KW - image KW - segmentation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12829 ER - TY - THES A1 - Hu, Ji T1 - A virtual machine architecture for IT-security laboratories T1 - Eine virtuelle maschinenbasierte Architektur für IT-Sicherheitslabore N2 - This thesis discusses challenges in IT security education, points out a gap between e-learning and practical education, and presents a work to fill the gap. E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in conventional computer laboratories poses particular problems such as immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. In this thesis, we introduce the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibility to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by a virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present a security management solution to prevent the misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This thesis demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically. N2 - Diese Dissertation beschreibt die Herausforderungen in der IT Sicherheitsausbildung und weist auf die noch vorhandene Lücke zwischen E-Learning und praktischer Ausbildung hin. Sie erklärt einen Ansatz sowie ein System, um diese Lücke zwischen Theorie und Praxis in der elektronischen Ausbildung zu schließen. E-Learning ist eine flexible und personalisierte Alternative zu traditionellen Lernmethoden. Heutigen E-Learning Systemen mangelt es jedoch an der Fähigkeit, praktische Erfahrungen über große Distanzen zu ermöglichen. Labor- bzw. Testumgebungen sowie praktische Übungen sind jedoch unverzichtbar, wenn es um die Ausbildung von Sicherheitsfachkräften geht. Konventionelle Laborumgebungen besitzen allerdings einige Nachteile wie bspw. hoher Erstellungsaufwand, keine Mobilität, hohe Wartungskosten, etc. Die Herausforderung heutiger IT Sicherheitsausbildung ist es daher, praktische Sicherheitslaborumgebungen und Übungen effektiv mittels E-Learning zu unterstützen. In dieser Dissertation wird die Architektur von Tele-Lab IT-Security vorgestellt, die Studenten nicht nur erlaubt theoretische Sicherheitskonzepte zu erlernen, sondern darüber hinaus Sicherheitsübungen in einer Online-Laborumgebung praktisch zu absolvieren. Die Teilnehmer können auf diese Weise wichtige praktische Erfahrungen im Umgang mit Sicherheitsprogrammen sammeln. Zur Realisierung einer sicheren Übungsumgebung, werden virtuelle Maschinen anstatt reale Rechner im Tele-Lab System verwendet. Mittels virtueller Maschinen können leicht Laborumgebungen geklont, verwaltet und über das Internet zugänglich gemacht werden. Im Vergleich zu herkömmlichen Offline-Laboren können somit erhebliche Investitions- und Wartungskosten gespart werden. Das Tele-Lab System bietet eine Reihe von technischen Funktionen, die den effektiven, zuverlässigen und sicheren Betrieb dieses Trainingssystems gewährleistet. Unter Beachtung angemessener Ressourcennutzung, Softwareinstallationen und Systemkonfigurationen wurden virtuelle Maschinen als Übungsstationen erstellt, die auf einem einzelnen Rechner betrieben werden. Für ihre Zuverlässigkeit und Verfügbarkeit ist das Managementsystem der virtuellen Maschinen verantwortlich. Diese Komponente besitzt die notwendigen Überwachungs- und Verwaltungsfunktionen, um kritische Fehler der virtuellen Maschinen während der Laufzeit zu erkennen und zu beheben. Damit die Übungsstationen nicht bspw. zur Kompromittierung von Produktivnetzwerken genutzt werden, beschreibt die Dissertation Sicherheits-Managementlösungen, die mittels Isolation auf System und Netzwerk Ebene genau dieses Risiko verhindern sollen. Diese Arbeit ist der Versuch, die Lücke zwischen E-Learning/Tele-Teaching und praktischer Sicherheitsausbildung zu schließen. Sie verfolgt nicht das Ziel, konventionelle Ausbildung in Offline Laboren zu ersetzen, sondern auch praktische Erfahrungen via E-Learning zu unterstützen. Die Dissertation zeigt die Möglichkeit, praktische Erfahrungen mittels Sicherheitsübungsumgebungen über das Internet auf zuverlässige, sichere und wirtschaftliche Weise zu vermitteln. KW - Computersicherheit KW - VM KW - E-Learning KW - IT security KW - virtual machine KW - E-Learning Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7818 ER -