TY - JOUR A1 - Schmidt, Henning A1 - Berg, Ralph A1 - Büttner, Lars A1 - Cordson, Jörg A1 - Luther, Eva-Maria A1 - Schön, Friedrich T1 - PEACE - Beispiel einer anwendungsorientierten Betriebssystemstruktur Y1 - 1996 ER - TY - THES A1 - Schneidenbach, Lars T1 - The benefits of one-sided communication interfaces for cluster computing Y1 - 2009 CY - Potsdam ER - TY - JOUR A1 - Schneidenbach, Lars A1 - Schnor, Bettina T1 - Design Issues in the Implementation of MPI2 One Sided Communication in Ethernet based Networks N2 - In current research, one sided communication of the MPI2 standard is pushed as a promising technique [6, 7, 10, 18]. But measurements of applications and MPI2 primitives show a different picture [17]. In this paper we analyze de sign issues of MPI2 one sided communication and its im plementations. We focus on asynchronous communication for parallel applications in Ethernet cluster environments. Further, one sided communication is compared to two sided communication. This paper will prove that the key problem to performance is not only the implementation of MPI2 one sided communication - it is the design. Y1 - 2007 SN - 978-0-88986-637-9 ER - TY - JOUR A1 - Schneidenbach, Lars A1 - Schnor, Bettina T1 - Migration of MPI Applications to IPv6 Networks Y1 - 2005 SN - 0-88986-468-3 ER - TY - JOUR A1 - Schneidenbach, Lars A1 - Schnor, Bettina A1 - Petri, Stefan T1 - Architecture and Implementation of the Socket Interface on Top of GAMMA Y1 - 2003 SN - 0-7695-2037-5 ER - TY - THES A1 - Schneider, Jan Niklas T1 - Computational approaches for emotion research T1 - Computergestützte Methoden für die Emotionsforschung N2 - Emotionen sind ein zentrales Element menschlichen Erlebens und spielen eine wichtige Rolle bei der Entscheidungsfindung. Diese Dissertation identifiziert drei methodische Probleme der aktuellen Emotionsforschung und zeigt auf, wie diese mittels computergestützter Methoden gelöst werden können. Dieser Ansatz wird in drei Forschungsprojekten demonstriert, die die Entwicklung solcher Methoden sowie deren Anwendung auf konkrete Forschungsfragen beschreiben. Das erste Projekt beschreibt ein Paradigma welches es ermöglicht, die subjektive und objektive Schwierigkeit der Emotionswahrnehmung zu messen. Darüber hinaus ermöglicht es die Verwendung einer beliebigen Anzahl von Emotionskategorien im Vergleich zu den üblichen sechs Kategorien der Basisemotionen. Die Ergebnisse deuten auf eine Zunahme der Schwierigkeiten bei der Wahrnehmung von Emotionen mit zunehmendem Alter der Darsteller hin und liefern Hinweise darauf, dass junge Erwachsene, ältere Menschen und Männer ihre Schwierigkeit bei der Wahrnehmung von Emotionen unterschätzen. Weitere Analysen zeigten eine geringe Relevanz personenbezogener Variablen und deuteten darauf hin, dass die Schwierigkeit der Emotionswahrnehmung vornehmlich durch die Ausprägung der Wertigkeit des Ausdrucks bestimmt wird. Das zweite Projekt zeigt am Beispiel von Arousal, einem etablierten, aber vagen Konstrukt der Emotionsforschung, wie Face-Tracking-Daten dazu genutzt werden können solche Konstrukte zu schärfen. Es beschreibt, wie aus Face-Tracking-Daten Maße für die Entfernung, Geschwindigkeit und Beschleunigung von Gesichtsausdrücken berechnet werden können. Das Projekt untersuchte wie diesen Maße mit der Arousal-Wahrnehmung in Menschen mit und ohne Autismus zusammenhängen. Der Abstand zum Neutralgesicht war prädiktiv für die Arousal-Bewertungen in beiden Gruppen. Die Ergebnisse deuten auf eine qualitativ ähnliche Wahrnehmung von Arousal für Menschen mit und ohne Autismus hin. Im dritten Projekt stellen wir die Partial-Least-Squares-Analyse als allgemeine Methode vor, um eine optimale Repräsentation zur Verknüpfung zweier hochdimensionale Datensätze zu finden. Das Projekt demonstriert die Anwendbarkeit dieser Methode in der Emotionsforschung anhand der Frage nach Unterschieden in der Emotionswahrnehmung zwischen Männern und Frauen. Wir konnten zeigen, dass die emotionale Wahrnehmung von Frauen systematisch mehr Varianz der Gesichtsausdrücke erfasst und dass signifikante Unterschiede in der Art und Weise bestehen, wie Frauen und Männer einige Gesichtsausdrücke wahrnehmen. Diese konnten wir als dynamische Gesichtsausdrücke visualisieren. Um die Anwendung der entwickelten Methode für die Forschungsgemeinschaft zu erleichtern, wurde ein Software-Paket für die Statistikumgebung R geschrieben. Zudem wurde eine Website entwickelt (thisemotiondoesnotexist.com), die es Besuchern erlaubt, ein Partial-Least-Squares-Modell von Emotionsbewertungen und Face-Tracking-Daten interaktiv zu erkunden, um die entwickelte Methode zu verbreiten und ihren Nutzen für die Emotionsforschung zu illustrieren. N2 - Emotions are a central element of human experience. They occur with high frequency in everyday life and play an important role in decision making. However, currently there is no consensus among researchers on what constitutes an emotion and on how emotions should be investigated. This dissertation identifies three problems of current emotion research: the problem of ground truth, the problem of incomplete constructs and the problem of optimal representation. I argue for a focus on the detailed measurement of emotion manifestations with computer-aided methods to solve these problems. This approach is demonstrated in three research projects, which describe the development of methods specific to these problems as well as their application to concrete research questions. The problem of ground truth describes the practice to presuppose a certain structure of emotions as the a priori ground truth. This determines the range of emotion descriptions and sets a standard for the correct assignment of these descriptions. The first project illustrates how this problem can be circumvented with a multidimensional emotion perception paradigm which stands in contrast to the emotion recognition paradigm typically employed in emotion research. This paradigm allows to calculate an objective difficulty measure and to collect subjective difficulty ratings for the perception of emotional stimuli. Moreover, it enables the use of an arbitrary number of emotion stimuli categories as compared to the commonly used six basic emotion categories. Accordingly, we collected data from 441 participants using dynamic facial expression stimuli from 40 emotion categories. Our findings suggest an increase in emotion perception difficulty with increasing actor age and provide evidence to suggest that young adults, the elderly and men underestimate their emotion perception difficulty. While these effects were predicted from the literature, we also found unexpected and novel results. In particular, the increased difficulty on the objective difficulty measure for female actors and observers stood in contrast to reported findings. Exploratory analyses revealed low relevance of person-specific variables for the prediction of emotion perception difficulty, but highlighted the importance of a general pleasure dimension for the ease of emotion perception. The second project targets the problem of incomplete constructs which relates to vaguely defined psychological constructs on emotion with insufficient ties to tangible manifestations. The project exemplifies how a modern data collection method such as face tracking data can be used to sharpen these constructs on the example of arousal, a long-standing but fuzzy construct in emotion research. It describes how measures of distance, speed and magnitude of acceleration can be computed from face tracking data and investigates their intercorrelations. We find moderate to strong correlations among all measures of static information on one hand and all measures of dynamic information on the other. The project then investigates how self-rated arousal is tied to these measures in 401 neurotypical individuals and 19 individuals with autism. Distance to the neutral face was predictive of arousal ratings in both groups. Lower mean arousal ratings were found for the autistic group, but no difference in correlation of the measures and arousal ratings could be found between groups. Results were replicated in a high autistic traits group consisting of 41 participants. The findings suggest a qualitatively similar perception of arousal for individuals with and without autism. No correlations between valence ratings and any of the measures could be found which emphasizes the specificity of our tested measures for the construct of arousal. The problem of optimal representation refers to the search for the best representation of emotions and the assumption that there is a one-fits-all solution. In the third project we introduce partial least squares analysis as a general method to find an optimal representation to relate two high-dimensional data sets to each other. The project demonstrates its applicability to emotion research on the question of emotion perception differences between men and women. The method was used with emotion rating data from 441 participants and face tracking data computed on 306 videos. We found quantitative as well as qualitative differences in the perception of emotional facial expressions between these groups. We showed that women’s emotional perception systematically captured more of the variance in facial expressions. Additionally, we could show that significant differences exist in the way that women and men perceive some facial expressions which could be visualized as concrete facial expression sequences. These expressions suggest differing perceptions of masked and ambiguous facial expressions between the sexes. In order to facilitate use of the developed method by the research community, a package for the statistical environment R was written. Furthermore, to call attention to the method and its usefulness for emotion research, a website was designed that allows users to explore a model of emotion ratings and facial expression data in an interactive fashion. KW - facial expression KW - emotion KW - perception KW - face tracking KW - perception differences KW - emotion representation KW - Gesichtsausdruck KW - Emotionen KW - Wahrnehmung KW - Wahrnehmungsunterschiede KW - computational methods KW - emotion research KW - computergestützte Methoden KW - Emotionsforschung KW - arousal perception KW - objective difficulty KW - Wahrnehmung von Arousal KW - Objektive Schwierigkeit Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459275 ER - TY - JOUR A1 - Schneider, Jan Niklas A1 - Brick, Timothy R. A1 - Dziobek, Isabel T1 - Distance to the neutral face predicts arousal ratings of dynamic facial expressions in individuals with and without Autism Spectrum Disorder JF - Frontiers in psychology N2 - Arousal is one of the dimensions of core affect and frequently used to describe experienced or observed emotional states. While arousal ratings of facial expressions are collected in many studies it is not well understood how arousal is displayed in or interpreted from facial expressions. In the context of socioemotional disorders such as Autism Spectrum Disorder, this poses the question of a differential use of facial information for arousal perception. In this study, we demonstrate how automated face-tracking tools can be used to extract predictors of arousal judgments. We find moderate to strong correlations among all measures of static information on one hand and all measures of dynamic information on the other. Based on these results, we tested two measures, average distance to the neutral face and average facial movement speed, within and between neurotypical individuals (N = 401) and individuals with autism (N = 19). Distance to the neutral face was predictive of arousal in both groups. Lower mean arousal ratings were found for the autistic group, but no difference in correlation of the measures and arousal ratings could be found between groups. Results were replicated in an high autistic traits group. The findings suggest a qualitatively similar perception of arousal for individuals with and without autism. No correlations between valence ratings and any of the measures could be found, emphasizing the specificity of our tested measures. Distance and speed predictors share variability and thus speed should not be discarded as a predictor of arousal ratings. KW - arousal KW - face tracking KW - facial expression KW - autism KW - perception KW - perception differences KW - measure development Y1 - 2020 U6 - https://doi.org/10.3389/fpsyg.2020.577494 SN - 1664-1078 VL - 11 PB - Frontiers Research Foundation CY - Lausanne ER - TY - THES A1 - Schnjakin, Maxim T1 - Cloud-RAID BT - eine Methode zur Bereitstellung zuverlässiger Speicherressourcen in öffentlichen Clouds Y1 - 2014 ER - TY - BOOK A1 - Schnor, Bettina T1 - Seminarband: Sensornetze T3 - Technischer Bericht Y1 - 2004 SN - 0946-7580 PB - Universität Potsdam, Institut für Informatik CY - Potsdam ER - TY - THES A1 - Scholz, Matthias T1 - Approaches to analyse and interpret biological profile data T1 - Methoden zur Analyse und Interpretation biologischer Profildaten N2 - Advances in biotechnologies rapidly increase the number of molecules of a cell which can be observed simultaneously. This includes expression levels of thousands or ten-thousands of genes as well as concentration levels of metabolites or proteins. Such Profile data, observed at different times or at different experimental conditions (e.g., heat or dry stress), show how the biological experiment is reflected on the molecular level. This information is helpful to understand the molecular behaviour and to identify molecules or combination of molecules that characterise specific biological condition (e.g., disease). This work shows the potentials of component extraction algorithms to identify the major factors which influenced the observed data. This can be the expected experimental factors such as the time or temperature as well as unexpected factors such as technical artefacts or even unknown biological behaviour. Extracting components means to reduce the very high-dimensional data to a small set of new variables termed components. Each component is a combination of all original variables. The classical approach for that purpose is the principal component analysis (PCA). It is shown that, in contrast to PCA which maximises the variance only, modern approaches such as independent component analysis (ICA) are more suitable for analysing molecular data. The condition of independence between components of ICA fits more naturally our assumption of individual (independent) factors which influence the data. This higher potential of ICA is demonstrated by a crossing experiment of the model plant Arabidopsis thaliana (Thale Cress). The experimental factors could be well identified and, in addition, ICA could even detect a technical artefact. However, in continuously observations such as in time experiments, the data show, in general, a nonlinear distribution. To analyse such nonlinear data, a nonlinear extension of PCA is used. This nonlinear PCA (NLPCA) is based on a neural network algorithm. The algorithm is adapted to be applicable to incomplete molecular data sets. Thus, it provides also the ability to estimate the missing data. The potential of nonlinear PCA to identify nonlinear factors is demonstrated by a cold stress experiment of Arabidopsis thaliana. The results of component analysis can be used to build a molecular network model. Since it includes functional dependencies it is termed functional network. Applied to the cold stress data, it is shown that functional networks are appropriate to visualise biological processes and thereby reveals molecular dynamics. N2 - Fortschritte in der Biotechnologie ermöglichen es, eine immer größere Anzahl von Molekülen in einer Zelle gleichzeitig zu erfassen. Das betrifft sowohl die Expressionswerte tausender oder zehntausender Gene als auch die Konzentrationswerte von Metaboliten oder Proteinen. Diese Profildaten verschiedener Zeitpunkte oder unterschiedlicher experimenteller Bedingungen (z.B. unter Stressbedingungen wie Hitze oder Trockenheit) zeigen, wie sich das biologische Experiment auf molekularer Ebene widerspiegelt. Diese Information kann genutzt werden, um molekulare Abläufe besser zu verstehen und um Moleküle oder Molekül-Kombinationen zu bestimmen, die für bestimmte biologische Zustände (z.B.: Krankheit) charakteristisch sind. Die Arbeit zeigt die Möglichkeiten von Komponenten-Extraktions-Algorithmen zur Bestimmung der wesentlichen Faktoren, die einen Einfluss auf die beobachteten Daten ausübten. Das können sowohl die erwarteten experimentellen Faktoren wie Zeit oder Temperatur sein als auch unerwartete Faktoren wie technische Einflüsse oder sogar unerwartete biologische Vorgänge. Unter der Extraktion von Komponenten versteht man die Reduzierung dieser stark hoch-dimensionalen Daten auf wenige neue Variablen, die eine Kombination aus allen ursprünglichen Variablen darstellen und als Komponenten bezeichnet werden. Die Standard-Methode für diesen Zweck ist die Hauptkomponentenanalyse (PCA). Es wird gezeigt, dass - im Vergleich zur nur die Varianz maximierenden PCA - moderne Methoden wie die Unabhängige Komponentenanalyse (ICA) für die Analyse molekularer Datensätze besser geeignet sind. Die Unabhängigkeit von Komponenten in der ICA entspricht viel besser unserer Annahme individueller (unabhängiger) Faktoren, die einen Einfluss auf die Daten ausüben. Dieser Vorteil der ICA wird anhand eines Kreuzungsexperiments mit der Modell-Pflanze Arabidopsis thaliana (Ackerschmalwand) demonstriert. Die experimentellen Faktoren konnten dabei gut identifiziert werden und ICA erkannte sogar zusätzlich einen technischen Störfaktor. Bei kontinuierlichen Beobachtungen wie in Zeitexperimenten zeigen die Daten jedoch häufig eine nichtlineare Verteilung. Für die Analyse dieser nichtlinearen Daten wird eine nichtlinear erweiterte Methode der PCA angewandt. Diese nichtlineare PCA (NLPCA) basiert auf einem neuronalen Netzwerk-Algorithmus. Der Algorithmus wurde für die Anwendung auf unvollständigen molekularen Daten erweitert. Dies ermöglicht es, die fehlenden Werte zu schätzen. Die Fähigkeit der nichtlinearen PCA zur Bestimmung nichtlinearer Faktoren wird anhand eines Kältestress-Experiments mit Arabidopsis thaliana demonstriert. Die Ergebnisse aus der Komponentenanalyse können zur Erstellung molekularer Netzwerk-Modelle genutzt werden. Da sie funktionelle Abhängigkeiten berücksichtigen, werden sie als Funktionale Netzwerke bezeichnet. Anhand der Kältestress-Daten wird demonstriert, dass solche funktionalen Netzwerke geeignet sind, biologische Prozesse zu visualisieren und dadurch die molekularen Dynamiken aufzuzeigen. KW - Bioinformatik KW - Hauptkomponentenanalyse KW - Unabhängige Komponentenanalyse KW - Neuronales Netz KW - Maschinelles Lernen KW - Fehlende Daten KW - Ackerschmalwand KW - nichtlineare PCA (NLPCA) KW - molekulare Netzwerke KW - nonlinear PCA (NLPCA) KW - molecular networks Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7839 ER - TY - JOUR A1 - Scholz, Matthias A1 - Kaplan, F. A1 - Guy, C. L. A1 - Kopka, Joachim A1 - Selbig, Joachim T1 - Non-linear PCA : a missing data approach N2 - Motivation: Visualizing and analysing the potential non-linear structure of a dataset is becoming an important task in molecular biology. This is even more challenging when the data have missing values. Results: Here, we propose an inverse model that performs non-linear principal component analysis (NLPCA) from incomplete datasets. Missing values are ignored while optimizing the model, but can be estimated afterwards. Results are shown for both artificial and experimental datasets. In contrast to linear methods, non-linear methods were able to give better missing value estimations for non-linear structured data. Application: We applied this technique to a time course of metabolite data from a cold stress experiment on the model plant Arabidopsis thaliana, and could approximate the mapping function from any time point to the metabolite responses. Thus, the inverse NLPCA provides greatly improved information for better understanding the complex response to cold stress Y1 - 2005 SN - 1367-4803 ER - TY - THES A1 - Schrape, Oliver T1 - Methodology for standard cell-based design and implementation of reliable and robust hardware systems T1 - Methoden für Standardzellbasiertes Design und Implementierung zuverlässiger und robuster Hardware Systeme N2 - Reliable and robust data processing is one of the hardest requirements for systems in fields such as medicine, security, automotive, aviation, and space, to prevent critical system failures caused by changes in operating or environmental conditions. In particular, Signal Integrity (SI) effects such as crosstalk may distort the signal information in sensitive mixed-signal designs. A challenge for hardware systems used in the space are radiation effects. Namely, Single Event Effects (SEEs) induced by high-energy particle hits may lead to faulty computation, corrupted configuration settings, undesired system behavior, or even total malfunction. Since these applications require an extra effort in design and implementation, it is beneficial to master the standard cell design process and corresponding design flow methodologies optimized for such challenges. Especially for reliable, low-noise differential signaling logic such as Current Mode Logic (CML), a digital design flow is an orthogonal approach compared to traditional manual design. As a consequence, mandatory preliminary considerations need to be addressed in more detail. First of all, standard cell library concepts with suitable cell extensions for reliable systems and robust space applications have to be elaborated. Resulting design concepts at the cell level should enable the logical synthesis for differential logic design or improve the radiation-hardness. In parallel, the main objectives of the proposed cell architectures are to reduce the occupied area, power, and delay overhead. Second, a special setup for standard cell characterization is additionally required for a proper and accurate logic gate modeling. Last but not least, design methodologies for mandatory design flow stages such as logic synthesis and place and route need to be developed for the respective hardware systems to keep the reliability or the radiation-hardness at an acceptable level. This Thesis proposes and investigates standard cell-based design methodologies and techniques for reliable and robust hardware systems implemented in a conventional semi-conductor technology. The focus of this work is on reliable differential logic design and robust radiation-hardening-by-design circuits. The synergistic connections of the digital design flow stages are systematically addressed for these two types of hardware systems. In more detail, a library for differential logic is extended with single-ended pseudo-gates for intermediate design steps to support the logic synthesis and layout generation with commercial Computer-Aided Design (CAD) tools. Special cell layouts are proposed to relax signal routing. A library set for space applications is similarly extended by novel Radiation-Hardening-by-Design (RHBD) Triple Modular Redundancy (TMR) cells, enabling a one fault correction. Therein, additional optimized architectures for glitch filter cells, robust scannable and self-correcting flip-flops, and clock-gates are proposed. The circuit concepts and the physical layout representation views of the differential logic gates and the RHBD cells are discussed. However, the quality of results of designs depends implicitly on the accuracy of the standard cell characterization which is examined for both types therefore. The entire design flow is elaborated from the hardware design description to the layout representations. A 2-Phase routing approach together with an intermediate design conversion step is proposed after the initial place and route stage for reliable, pure differential designs, whereas a special constraining for RHBD applications in a standard technology is presented. The digital design flow for differential logic design is successfully demonstrated on a reliable differential bipolar CML application. A balanced routing result of its differential signal pairs is obtained by the proposed 2-Phase-routing approach. Moreover, the elaborated standard cell concepts and design methodology for RHBD circuits are applied to the digital part of a 7.5-15.5 MSPS 14-bit Analog-to-Digital Converter (ADC) and a complex microcontroller architecture. The ADC is implemented in an unhardened standard semiconductor technology and successfully verified by electrical measurements. The overhead of the proposed hardening approach is additionally evaluated by design exploration of the microcontroller application. Furthermore, the first obtained related measurement results of novel RHBD-∆TMR flip-flops show a radiation-tolerance up to a threshold Linear Energy Transfer (LET) of 46.1, 52.0, and 62.5 MeV cm2 mg-1 and savings in silicon area of 25-50 % for selected TMR standard cell candidates. As a conclusion, the presented design concepts at the cell and library levels, as well as the design flow modifications are adaptable and transferable to other technology nodes. In particular, the design of hybrid solutions with integrated reliable differential logic modules together with robust radiation-tolerant circuit parts is enabled by the standard cell concepts and design methods proposed in this work. N2 - Eine zuverlässige und robuste Datenverarbeitung ist eine der wichtigsten Voraussetzungen für Systeme in Bereichen wie Medizin, Sicherheit, Automobilbau, Luft- und Raumfahrt, um kritische Systemausfälle zu verhindern, welche durch Änderungen der Betriebsbedingung oder Umweltgegebenheiten hervorgerufen werden können. Insbesondere Signalintegritätseffekte (Signal Integrity (SI)) wie das Übersprechen und Überlagern von Signalen (crosstalk) können den Informationsgehalt in empfindlichen Mixed-Signal-Designs verzerren. Eine zusätzliche Herausforderung für Hardwaresysteme für Weltraumanwendungen ist die Strahlung. Resultierende Effekte, die durch hochenergetische Teilchentreffer ausgelöst werden (Single Event Effects (SEEs)), können zu fehlerhaften Berechnungen, beschädigten Konfigurationseinstellungen, unerwünschtem Systemverhalten oder sogar zu völliger Fehlfunktion führen. Da diese Anwendungen einen zusätzlichen Aufwand beim Entwurf und der Implementierung erfordern, ist es von Vorteil, über Standardzellenentwurfskonzepte und entsprechende Entwurfsablaufmethoden zu verfügen, die für genau solche Herausforderungen optimiert sind. Insbesondere für zuverlässige, rauscharme differenzielle Logik, wie der Current Mode Logic (CML), ist ein digitaler Entwurfsablauf ein orthogonaler Ansatz im Vergleich zum traditionellen manuellen Entwurfskonzept. Infolgedessen müssen obligatorische Vorüberlegungen detaillierter behandelt werden. Zunächst sind Konzepte für Standardzellbibliotheken mit geeigneten Zellerweiterungen für zuverlässige Systeme und robuste Raumfahrtanwendungen zu erarbeiten. Daraus resultierende Entwurfskonzepte auf Zellebene sollten die logische Synthese für den differenziellen Logikentwurf ermöglichen oder die Strahlungshärte eines Designs verbessern. Parallel dazu sind die Hauptziele der vorgeschlagenen Zellarchitekturen, die Verringerung der genutzten Siliziumfläche und der Verlustleistung sowie den Verzögerungs-Overhead zu minimieren. Zweitens ist ein spezieller Aufbau für die Charakterisierung von Standardzellen erforderlich, um eine angemessene und genaue Modellierung der Logikgatter zu ermöglichen. Nicht zuletzt müssen für die jeweiligen Hardwaresysteme Methoden für die Entwurfsphasen wie Logik-Synthese und das Platzieren und Routen (Place and Route (PnR)) entwickelt werden, um die Zuverlässigkeit beziehungsweise die Strahlungshärte auf einem akzeptablen Niveau zu halten. In dieser Arbeit werden standardisierte Zellen-basierte Entwurfsmethoden und -techniken für zuverlässige und robuste Hardwaresysteme vorgeschlagen und untersucht, welche in einer herkömmlichen Halbleitertechnologie implementiert werden. Dabei werden zuverlässige differenzielle Logikschaltungen und robuste strahlungsgehärtete Schaltungen betrachtet. Die synergetischen Verbindungen des digitalen Entwurfs werden systematisch für diese beiden Hardwaresysteme behandelt. Im Detail wird eine Bibliothek für differentielle Logik mit Single-Ended-Pseudo-Gattern für Zwischenschritte erweitert, die die Logiksynthese und Layout-Generierung mit heutigen Entwicklungswerkzeugen unterstützen. Ein spezieller Rahmen für das Layout der Zellen wird vorgeschlagen, um das Routing der Signale zu vereinfachen. Die Bibliothek für Raumfahrtanwendungen wird in ähnlicher Weise um neuartige Radiation-Hardening-by-Design (RHBD)-Zellen mit dreifacher modularer Redundanz (Triple Modular Redundancy (TMR)) erweitert, welche eine 1-Bit-Fehlerkorrektur erlaubt. Zusätzlich werden optimierte Architekturen für Glitch-Filterzellen, robuste abtastbare (scannable) und selbstkorrigierende Flip-flops und Taktgatter (clock-gates) vorgeschlagen. Die Schaltungskonzepte, die physische Layout-Repräsentation der differentiellen Logikgatter und der vorgeschlagenen RHBD-Zellen werden diskutiert. Die Qualität der Ergebnisse der Entwürfe hängt jedoch implizit von der Genauigkeit der Standardzellencharakterisierung ab, die daher für beide Typen untersucht wird. Der gesamte Entwurfsablauf wird von der Entwurfsbeschreibung der Hardware bis hin zur generierten Layout-Darstellung ausgearbeitet. Infolgedessen wird ein 2-Phasen-Routing-Ansatz zusammen mit einem zwischengeschalteten Design-Konvertierungsschritt nach der initialen PnR-Phase für zuverlässige, differentielle Designs vorgeschlagen, während ein spezielles Constraining für RHBD-Anwendungen vorgestellt wird. Der digitale Entwurfsablauf für Differenziallogik wird erfolgreich an einer zuverlässigen bipolaren Differenzial-CML-Anwendung demonstriert. Durch den 2-Phasen-Routing-Ansatz wird ein ausgewogenes Routing-Ergebnis differentieller Signalpaare erzielt. Darüber hinaus werden die erarbeiteten Standardzellenkonzepte und die Entwurfsmethodik für RHBD-Schaltungen auf den digitalen Teil eines 7.5-15.5MSPS 14-bit Analog-Digital-Wandlers (ADC) und einer komplexen Mikrocontroller-Architektur angewandt. Der ADC wurde in einer nicht-gehärteten Standard-Halbleitertechnologie implementiert und erfolgreich durch elektrische Messungen verifiziert. Der Mehraufwand des Härtungsansatzes wird zusätzlich durch Design Exploration der Mikrocontroller-Anwendung bewertet. Ferner zeigen erste Messergebnisse der neuartigen RHBD-ΔTMR-Flip-flops eine Strahlungstoleranz bis zu einem linearen Energietransfer (Linear Energy Transfers (LET)) Schwellwert von 46.1, 52.0 und 62.5MeVcm2 mg-1 und eine Einsparung an Siliziumfläche von 25-50% für ausgewählte TMR-Standardzellenkandidaten. Die vorgestellten Entwurfskonzepte auf Zell- und Bibliotheksebene sowie die Änderungen des Entwurfsablaufs sind anpassbar und übertragbar auf andere Technologieknoten. Insbesondere der Entwurf hybrider Lösungen mit integrierten zuverlässigen differenziellen Logikmodulen zusammen mit robusten strahlungstoleranten Schaltungsteilen wird durch die in dieser Arbeit vorgeschlagenen Konzepte und Entwurfsmethoden ermöglicht. KW - hardware design KW - ASIC KW - radiation hardness KW - digital design KW - ASIC (Applikationsspezifische Integrierte Schaltkreise) KW - Digital Design KW - Hardware Design KW - Strahlungshartes Design Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-589326 ER - TY - JOUR A1 - Schrape, Oliver A1 - Andjelkovic, Marko A1 - Breitenreiter, Anselm A1 - Zeidler, Steffen A1 - Balashov, Alexey A1 - Krstić, Miloš T1 - Design and evaluation of radiation-hardened standard cell flip-flops JF - IEEE transactions on circuits and systems : a publication of the IEEE Circuits and Systems Society: 1, Regular papers N2 - Use of a standard non-rad-hard digital cell library in the rad-hard design can be a cost-effective solution for space applications. In this paper we demonstrate how a standard non-rad-hard flip-flop, as one of the most vulnerable digital cells, can be converted into a rad-hard flip-flop without modifying its internal structure. We present five variants of a Triple Modular Redundancy (TMR) flip-flop: baseline TMR flip-flop, latch-based TMR flip-flop, True-Single Phase Clock (TSPC) TMR flip-flop, scannable TMR flip-flop and self-correcting TMR flipflop. For all variants, the multi-bit upsets have been addressed by applying special placement constraints, while the Single Event Transient (SET) mitigation was achieved through the usage of customized SET filters and selection of optimal inverter sizes for the clock and reset trees. The proposed flip-flop variants feature differing performance, thus enabling to choose the optimal solution for every sensitive node in the circuit, according to the predefined design constraints. Several flip-flop designs have been validated on IHP's 130nm BiCMOS process, by irradiation of custom-designed shift registers. It has been shown that the proposed TMR flip-flops are robust to soft errors with a threshold Linear Energy Transfer (LET) from (32.4 MeV.cm(2)/mg) to (62.5 MeV.cm(2)/mg), depending on the variant. KW - Single event effect KW - fault tolerance KW - triple modular redundancy KW - ASIC KW - design flow KW - radhard design Y1 - 2021 U6 - https://doi.org/10.1109/TCSI.2021.3109080 SN - 1549-8328 SN - 1558-0806 SN - 1057-7122 VL - 68 IS - 11 SP - 4796 EP - 4809 PB - Inst. of Electr. and Electronics Engineers CY - New York, NY ER - TY - JOUR A1 - Schröder-Preikschat, Wolfgang T1 - Experience developing an object-oriented parallel operating system Y1 - 1995 ER - TY - BOOK A1 - Schröder-Preikschat, Wolfgang T1 - The logical design of parallel operating systems Y1 - 1994 PB - Prentice Hall International CY - Englewood Cliffs ER - TY - JOUR A1 - Schröder-Preikschat, Wolfgang T1 - PEACE - software backplane for parallel computing Y1 - 1994 ER - TY - JOUR A1 - Schröder-Preikschat, Wolfgang A1 - Garnatz, Thomas A1 - Haack, Ute A1 - Sander, Michael T1 - Experience made with the design and development of a message-passing kernel for a dual-processor-node parallel computer Y1 - 1996 ER - TY - JOUR A1 - Schröder-Preikschat, Wolfgang A1 - Giloi, Wolfgang K. T1 - The next generation parallel architecture - multiple executing threads Y1 - 1995 ER - TY - THES A1 - Schröter, Alexander T1 - Erstellung und Evaluation eines Fragebogens zur Erfassung von komplexen Interaktionssituationen in Software-Entwicklungsprojekten T1 - Creation and evaluation of a questionnaire for recording complex interaction situations in software development projects N2 - Die fortschreitende Digitalisierung durchzieht immer mehr Lebensbereiche und führt zu immer komplexeren sozio-technischen Systemen. Obwohl diese Systeme zur Lebenserleichterung entwickelt werden, können auch unerwünschte Nebeneffekte entstehen. Ein solcher Nebeneffekt könnte z.B. die Datennutzung aus Fitness-Apps für nachteilige Versicherungsentscheidungen sein. Diese Nebeneffekte manifestieren sich auf allen Ebenen zwischen Individuum und Gesellschaft. Systeme mit zuvor unerwarteten Nebeneffekten können zu sinkender Akzeptanz oder einem Verlust von Vertrauen führen. Da solche Nebeneffekte oft erst im Gebrauch in Erscheinung treten, bedarf es einer besonderen Betrachtung bereits im Konstruktionsprozess. Mit dieser Arbeit soll ein Beitrag geleistet werden, um den Konstruktionsprozess um ein geeignetes Hilfsmittel zur systematischen Reflexion zu ergänzen. In vorliegender Arbeit wurde ein Analysetool zur Identifikation und Analyse komplexer Interaktionssituationen in Software-Entwicklungsprojekten entwickelt. Komplexe Interaktionssituationen sind von hoher Dynamik geprägt, aus der eine Unvorhersehbarkeit der Ursache-Wirkungs-Beziehungen folgt. Hierdurch können die Akteur*innen die Auswirkungen der eigenen Handlungen nicht mehr überblicken, sondern lediglich im Nachhinein rekonstruieren. Hieraus können sich fehlerhafte Interaktionsverläufe auf vielfältigen Ebenen ergeben und oben genannte Nebeneffekte entstehen. Das Analysetool unterstützt die Konstrukteur*innen in jeder Phase der Entwicklung durch eine angeleitete Reflexion, um potenziell komplexe Interaktionssituationen zu antizipieren und ihnen durch Analyse der möglichen Ursachen der Komplexitätswahrnehmung zu begegnen. Ausgehend von der Definition für Interaktionskomplexität wurden Item-Indikatoren zur Erfassung komplexer Interaktionssituationen entwickelt, die dann anhand von geeigneten Kriterien für Komplexität analysiert werden. Das Analysetool ist als „Do-It-Yourself“ Fragebogen mit eigenständiger Auswertung aufgebaut. Die Genese des Fragebogens und die Ergebnisse der durchgeführten Evaluation an fünf Softwarentwickler*innen werden dargestellt. Es konnte festgestellt werden, dass das Analysetool bei den Befragten als anwendbar, effektiv und hilfreich wahrgenommen wurde und damit eine hohe Akzeptanz bei der Zielgruppe genießt. Dieser Befund unterstützt die gute Einbindung des Analysetools in den Software-Entwicklungsprozess. N2 - Advancing digitalization is permeating more and more areas of life and leading to increasingly complex socio-technical systems. Although these systems are being developed to make life easier, undesirable side effects can also arise. One such side effect could be, for example, the use of data from fitness apps for adverse insurance decisions. These side effects manifest themselves at all levels between the individual and society. Systems with previously unexpected side effects can lead to a decline in acceptance or a loss of trust. Since such side effects often only become apparent during use, special consideration is required during the design process. This work is intended to make a contribution to supplementing the design process with a suitable tool for systematic reflection. In this thesis, an analysis tool was developed to identify and analyze complex interaction situations in software development projects. Complex interaction situations are characterized by high dynamics, resulting in unpredictability of cause-effect relationships. As a result, the actors are no longer able to oversee the effects of their own actions, but can only reconstruct them in retrospect. This can result in incorrect interaction processes on many levels and the side effects mentioned above. The analysis tool supports the designers in each phase of development through guided reflection in order to anticipate potentially complex interaction situations and to counter them by analyzing the possible causes of the perception of complexity. Based on the definition of interaction complexity, item indicators were developed to capture complex interaction situations, which are then analyzed using suitable criteria for complexity. The analysis tool is structured as a "do-it-yourself" questionnaire with independent evaluation. The genesis of the questionnaire and the results of the evaluation carried out on five software developers are presented. It was found that the analysis tool was perceived by the respondents as applicable, effective and helpful and thus enjoys a high level of acceptance among the target group. This finding supports the good integration of the analysis tool into the software development process. KW - Komplexität KW - sozio-technisches System KW - Softwareentwicklung KW - Mensch-Technik-Interaktion KW - Methodik KW - complexity KW - socio-technical system KW - software development KW - human-technology interaction KW - methodology Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-631873 ER - TY - BOOK A1 - Schubert, Sigrid A1 - Schwill, Andreas T1 - Didaktik der Informatik Y1 - 2011 SN - 978-3-8274-2652-9 PB - Spektrum Akademischer Verlag CY - Heidelberg ER - TY - JOUR A1 - Schubert, Wolfgang A1 - Glöde, Dirk A1 - Hegewald, Eberhard A1 - Koutzevlov, Atanas T1 - ESF-Abschlußbericht Y1 - 1994 PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Schubert, Wolfgang A1 - Koutzevlov, Atanas A1 - Horn, Erika A1 - Rätsch, Gunnar A1 - Tschapek, Alexej T1 - Aspekte der Flexibilisierung von Systemen für den Hardwaretest T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 04 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Schulmeister, Thomas A1 - Rose, Jürgen A1 - Voigt, Horst T1 - Some extensions of Schmidt's partition method for sequence comparison based on binary character amino acid properties Y1 - 1996 ER - TY - JOUR A1 - Schulmeister, Thomas A1 - Scheller, Frieder W. T1 - The mathematics of exponential signal amplification in amperometric three enzyme electrodes Y1 - 1996 ER - TY - THES A1 - Schult, Wolfgang T1 - Architektur komponenten-basierter Systeme mit LOOM : Aspekte, Muster, Werkzeuge Y1 - 2009 SN - 978-3-86955-031-2 PB - Cuvillier CY - Göttingen ER - TY - JOUR A1 - Schulte, Carsten T1 - Biographisches Lernen in der Informatik JF - Commentarii informaticae didacticae : (CID) N2 - Biographisches Lernen betont insbesondere die Rolle individueller biographischer Erfahrungen und deren Auswirkungen auf Selbstbild, Weltbild und Verhaltensmuster. Schlagwortartig kann diese Perspektive als Unterschied zwischen ‚Informatik lernen‘ und ‚Informatiker/in werden‘ beschrieben werden. Im Artikel wird die Perspektive des Biographischen Lernens an Beispielen aus der Informatik skizziert. Biographisches Lernen ist in der Informatik zunächst aus rein pragmatischen Gründen bedeutsam. Der rasche Wandel der Informationstechnologien im Alltag verändert Erfahrungshintergründe der Studierenden (bzw. Schülerinnen und Schüler). Dementsprechend verändern sich Erwartungen, Interessen, Vorkenntnisse, generelle Einstellungen oder auch ganz banal die ‚IT-Ausstattung‘ der Lernenden. KW - Informatik KW - Ausbildung KW - Didaktik KW - Hochschuldidaktik Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29649 SN - 1868-0844 SN - 2191-1940 IS - 1 SP - 47 EP - 63 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Schulz-Hanke, Christian T1 - BCH Codes mit kombinierter Korrektur und Erkennung T1 - BCH codes with combined error correction and detection N2 - BCH Codes mit kombinierter Korrektur und Erkennung In dieser Arbeit wird auf Grundlage des BCH Codes untersucht, wie eine Fehlerkorrektur mit einer Erkennung höherer Fehleranzahlen kombiniert werden kann. Mit dem Verfahren der 1-Bit Korrektur mit zusätzlicher Erkennung höherer Fehler wurde ein Ansatz entwickelt, welcher die Erkennung zusätzlicher Fehler durch das parallele Lösen einfacher Gleichungen der Form s_x = s_1^x durchführt. Die Anzahl dieser Gleichungen ist linear zu der Anzahl der zu überprüfenden höheren Fehler. In dieser Arbeit wurde zusätzlich für bis zu 4-Bit Korrekturen mit zusätzlicher Erkennung höherer Fehler ein weiterer allgemeiner Ansatz vorgestellt. Dabei werden parallel für alle korrigierbaren Fehleranzahlen spekulative Fehlerkorrekturen durchgeführt. Aus den bestimmten Fehlerstellen werden spekulative Syndromkomponenten erzeugt, durch welche die Fehlerstellen bestätigt und höhere erkennbare Fehleranzahlen ausgeschlossen werden können. Die vorgestellten Ansätze unterscheiden sich von dem in entwickelten Ansatz, bei welchem die Anzahl der Fehlerstellen durch die Berechnung von Determinanten in absteigender Reihenfolge berechnet wird, bis die erste Determinante 0 bildet. Bei dem bekannten Verfahren ist durch die Berechnung der Determinanten eine faktorielle Anzahl an Berechnungen in Relation zu der Anzahl zu überprüfender Fehler durchzuführen. Im Vergleich zu dem bekannten sequentiellen Verfahrens nach Berlekamp Massey besitzen die Berechnungen im vorgestellten Ansatz simple Gleichungen und können parallel durchgeführt werden.Bei dem bekannten Verfahren zur parallelen Korrektur von 4-Bit Fehlern ist eine Gleichung vierten Grades im GF(2^m) zu lösen. Dies erfolgt, indem eine Hilfsgleichung dritten Grades und vier Gleichungen zweiten Grades parallel gelöst werden. In der vorliegenden Arbeit wurde gezeigt, dass sich eine Gleichung zweiten Grades einsparen lässt, wodurch sich eine Vereinfachung der Hardware bei einer parallelen Realisierung der 4-Bit Korrektur ergibt. Die erzielten Ergebnisse wurden durch umfangreiche Simulationen in Software und Hardwareimplementierungen überprüft. N2 - Based on the BCH code, this thesis investigates how an BCH error correction approach can be combined with an additional detection of higher numbers of errors. With the method of 1-bit correction with additional detection of higher errors, an approach is developed that performs the additional detection of higher errors by solving simple equations of the form s_x = s_1^x in parallel. The number of these equations is in a linear relationship to the number of higher errors to be checked. In this thesis, a generalization for such an approach is presented for up to 4-bit correction with additional detection of higher errors. Therefore, a speculative error correction is carried out in parallel fashion for each correctable error count. For each of the generated speculative error positions, a speculative syndrome is generated, which can be used to confirm the error positions and exclude detectable errors of higher number. The presented approach differs from the approach developed in, in which the number of errors is determined by calculating specific determinants in descending order until the first determinant is 0. In the well-known method, the calculation of the determinants involves performing a factorial number of calculations in relation to the number of errors to be checked. Compared to the well-known sequential method according to Berlekamp Massey, the calculations in the presented approach can be performed by solving simple equations and can be carried out in parallel. In the well-known method for parallel correction of 4-bit errors, an equation of fourth degree in the GF(2^m) has to be solved. This is done by solving a third-degree auxiliary equation and four second-degree equations in parallel. In the present thesis it was shown that a second-degree equation can be saved, resulting in a simplification of the hardware for a parallel realization of the 4-bit correction. The results obtained were verified by extensive simulations in software and hardware implementations. KW - Code KW - BCH KW - Fehlerkorrektur KW - Fehlererkennung KW - linearer Code KW - BCH KW - code KW - error correction KW - error detection KW - linear code Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617943 ER - TY - JOUR A1 - Schulze, Gunnar T1 - Workflow for rapid metagenome analysis JF - Process design for natural scientists: an agile model-driven approach N2 - Analyses of metagenomes in life sciences present new opportunities as well as challenges to the scientific community and call for advanced computational methods and workflows. The large amount of data collected from samples via next-generation sequencing (NGS) technologies render manual approaches to sequence comparison and annotation unsuitable. Rather, fast and efficient computational pipelines are needed to provide comprehensive statistics and summaries and enable the researcher to choose appropriate tools for more specific analyses. The workflow presented here builds upon previous pipelines designed for automated clustering and annotation of raw sequence reads obtained from next-generation sequencing technologies such as 454 and Illumina. Employing specialized algorithms, the sequence reads are processed at three different levels. First, raw reads are clustered at high similarity cutoff to yield clusters which can be exported as multifasta files for further analyses. Independently, open reading frames (ORFs) are predicted from raw reads and clustered at two strictness levels to yield sets of non-redundant sequences and ORF families. Furthermore, single ORFs are annotated by performing searches against the Pfam database Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 88 EP - 100 PB - Springer CY - Berlin ER - TY - THES A1 - Schumacher, Kinga T1 - Hybride semantische Suche - eine Kombination aus Fakten- und Dokumentretrieval T1 - Hybrid semantic search - a combination of fact and document retrieval N2 - Das Thema der vorliegenden Arbeit ist die semantische Suche im Kontext heutiger Informationsmanagementsysteme. Zu diesen Systemen zählen Intranets, Web 3.0-Anwendungen sowie viele Webportale, die Informationen in heterogenen Formaten und Strukturen beinhalten. Auf diesen befinden sich einerseits Daten in strukturierter Form und andererseits Dokumente, die inhaltlich mit diesen Daten in Beziehung stehen. Diese Dokumente sind jedoch in der Regel nur teilweise strukturiert oder vollständig unstrukturiert. So beschreiben beispielsweise Reiseportale durch strukturierte Daten den Zeitraum, das Reiseziel, den Preis einer Reise und geben in unstrukturierter Form weitere Informationen, wie Beschreibungen zum Hotel, Zielort, Ausflugsziele an. Der Fokus heutiger semantischer Suchmaschinen liegt auf dem Finden von Wissen entweder in strukturierter Form, auch Faktensuche genannt, oder in semi- bzw. unstrukturierter Form, was üblicherweise als semantische Dokumentensuche bezeichnet wird. Einige wenige Suchmaschinen versuchen die Lücke zwischen diesen beiden Ansätzen zu schließen. Diese durchsuchen zwar gleichzeitig strukturierte sowie unstrukturierte Daten, werten diese jedoch entweder weitgehend voneinander unabhängig aus oder schränken die Suchmöglichkeiten stark ein, indem sie beispielsweise nur bestimmte Fragemuster unterstützen. Hierdurch werden die im System verfügbaren Informationen nicht ausgeschöpft und gleichzeitig unterbunden, dass Zusammenhänge zwischen einzelnen Inhalten der jeweiligen Informationssysteme und sich ergänzende Informationen den Benutzer erreichen.
 Um diese Lücke zu schließen, wurde in der vorliegenden Arbeit ein neuer hybrider semantischer Suchansatz entwickelt und untersucht, der strukturierte und semi- bzw. unstrukturierte Inhalte während des gesamten Suchprozesses kombiniert. Durch diesen Ansatz werden nicht nur sowohl Fakten als auch Dokumente gefunden, es werden auch Zusammenhänge, die zwischen den unterschiedlich strukturierten Daten bestehen, in jeder Phase der Suche genutzt und fließen in die Suchergebnisse mit ein. Liegt die Antwort zu einer Suchanfrage nicht vollständig strukturiert, in Form von Fakten, oder unstrukturiert, in Form von Dokumenten vor, so liefert dieser Ansatz eine Kombination der beiden. Die Berücksichtigung von unterschiedlich Inhalten während des gesamten Suchprozesses stellt jedoch besondere Herausforderungen an die Suchmaschine. Diese muss in der Lage sein, Fakten und Dokumente in Abhängigkeit voneinander zu durchsuchen, sie zu kombinieren sowie die unterschiedlich strukturierten Ergebnisse in eine geeignete Rangordnung zu bringen. Weiterhin darf die Komplexität der Daten nicht an die Endnutzer weitergereicht werden. Die Darstellung der Inhalte muss vielmehr sowohl bei der Anfragestellung als auch bei der Darbietung der Ergebnisse verständlich und leicht interpretierbar sein. Die zentrale Fragestellung der Arbeit ist, ob ein hybrider Ansatz auf einer vorgegebenen Datenbasis die Suchanfragen besser beantworten kann als die semantische Dokumentensuche und die Faktensuche für sich genommen, bzw. als eine Suche die diese Ansätze im Rahmen des Suchprozesses nicht kombiniert. Die durchgeführten Evaluierungen aus System- und aus Benutzersicht zeigen, dass die im Rahmen der Arbeit entwickelte hybride semantische Suchlösung durch die Kombination von strukturierten und unstrukturierten Inhalten im Suchprozess bessere Antworten liefert als die oben genannten Verfahren und somit Vorteile gegenüber bisherigen Ansätzen bietet. Eine Befragung von Benutzern macht deutlich, dass die hybride semantische Suche als verständlich empfunden und für heterogen strukturierte Datenmengen bevorzugt wird. N2 - The subject of this doctoral thesis is semantic search in the context of today's information management systems. These systems include intranets and Web 3.0 applications, as well as many web portals that contain information in heterogeneous formats and structures. On the one hand, they contain data in a structured form, and on the other hand they contain documents that are related to this data. However, these documents are usually only partially structured or completely unstructured. For example, travel portals describe the period, the destination, the cost of the travel through structured data, while additional information, such as descriptions of the hotel, destination, excursions, etc. is in unstructured form. 
The focus of today's semantic search engines is to find knowledge either in a structured form (also called fact retrieval), or in semi- or un-structured form, which is commonly referred to as semantic document retrieval. Only a few search engines are trying to close the gap between these two approaches. Although they search simultaneously for structured and unstructured data, the results are either analyzed independently, or the search possibilities are highly limited: for example, they might support only specific question patterns. Accordingly, the information available in the system is not exploited, and, simultaneously, the relationships between individual pieces of content in the respective information systems and complementary information cannot reach the user. In order to close this gap, this thesis develops and evaluates a new hybrid semantic search approach that combines structured and semi- or un-structured content throughout the entire search process. This approach not only finds facts and documents, it uses also relationships that exist between the different items of structured data at every stage of the search, and integrates them into the search results. If the answer to a query is not completely structured (like a fact), or unstructured (like a document), this approach provides a query-specific combination of both. However, consideration of structured as well as semi- or un-structured content by the information system throughout the entire search process poses a special challenge to the search engine. This engine must be able to browse facts and documents independently, to combine them, and to rank the differently structured results in an appropriate order. Furthermore, the complexity of the data should not be apparent to the end user. Rather, the presentation of the contents must be understandable and easy to interpret, both in the query request and the presentation of results. The central question of this thesis is whether a hybrid approach can answer the queries on a given database better than a semantic document search or fact-finding alone, or any other hybrid search that does not combine these approaches during the search process. The evaluations from the perspective of the system and users show that the hybrid semantic search solution developed in this thesis provides better answers than the methods above by combining structured and unstructured content in the search process, and therefore gives an advantage over previous approaches. A survey of users shows that the hybrid semantic search is perceived as understandable and preferable for heterogeneously structured datasets. KW - semantische Suche KW - hybride semantische Suche KW - Methoden der semantischen Suche KW - Evaluierung semantischer Suchmaschinen KW - semantisches Ranking KW - information retrieval KW - semantic search KW - hybrid semantic search KW - semantic search methods KW - semantic search evaluation KW - semantic ranking Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-405973 ER - TY - THES A1 - Schuschel, Hilmar T1 - Integrierte Prozessplanung und -ausführung Y1 - 2006 CY - Potsdam ER - TY - JOUR A1 - Schwidrowski, Kirstin A1 - Schmid, Thilo A1 - Brück, Rainer A1 - Freischlad, Stefan A1 - Schubert, Sigrid A1 - Stechert, Peer T1 - Mikrosystemverständnis im Hochschulstudium – Ein praktikumsorientierter Ansatz JF - Commentarii informaticae didacticae : (CID) N2 - Mit hochschuldidaktischer Forschung zur Informatik soll aus einem traditionellen Hardwarepraktikum ein attraktives Entwurfs- und Anwendungspraktikum für Mikrosysteme (MSE) werden, das ein unverzichtbarer Bestandteil des Informatikstudiums ist. Diese Neugestaltung der Lehre wurde aufgrund des Bologna-Prozesses und der zunehmenden Präsenz multifunktionaler eingebetteter Mikrosysteme (EMS) im täglichen Leben notwendig. Ausgehend von einer Lehrveranstaltungsanalyse werden Vorschläge für die Kompetenzorientierung abgeleitet. Es wird gezeigt, dass für eine Verfeinerung des Ansatzes ein wissenschaftlich fundiertes Verständnis der erwarteten Kompetenzen erforderlich ist. Für den aufgezeigten Forschungsbedarf werden ein Ansatz zur Beschreibung des notwendigen Mikrosystemverständnisses dargestellt und Forschungsfelder zu Aspekten des Kompetenzbegriffs im Kontext der Lehrveranstaltung beschrieben. KW - Informatik KW - Ausbildung KW - Didaktik KW - Hochschuldidaktik Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29601 SN - 1868-0844 SN - 2191-1940 IS - 1 SP - 131 EP - 142 ER - TY - JOUR A1 - Schwill, Andreas T1 - Un approccio uniforme all'insegnamento dell'Informatica Y1 - 1996 ER - TY - JOUR A1 - Schwill, Andreas T1 - Computer science education based on fundamental ideas Y1 - 1997 ER - TY - JOUR A1 - Schwill, Andreas T1 - Fundamental ideas : rethinking computer science education Y1 - 1997 ER - TY - JOUR A1 - Schwill, Andreas T1 - Grafische Datenverarbeitung : eine fruchtbare Verbindung von Mathematik und Informatik Y1 - 1997 ER - TY - JOUR A1 - Schwill, Andreas T1 - Modelle in der Fachsprache der Informatik Y1 - 2002 SN - 3-88579-351-2 ER - TY - JOUR A1 - Schwill, Andreas T1 - Ab wann kann man mit Indern Informatik machen? : eine Studie über informatische Fähigkeiten von Kindern Y1 - 2001 UR - http://www.informatica-didactica.de/Forschung/Schriften/INFOS2001Paderborn.pdf ER - TY - JOUR A1 - Schwill, Andreas T1 - Gedanken zur Lehramtsausbildung Informatik Y1 - 2001 UR - http://www.informatica-didactica.de/Forschung/ME2001.htm SN - 3-85133-022-6 ER - TY - JOUR A1 - Schwill, Andreas T1 - Die Vielfalt der Modelle in der Informatik Y1 - 2001 SN - 3-88579-334-2 ER - TY - JOUR A1 - Schwill, Andreas T1 - Bericht zur Arbeitsgruppe "Modellbildung und fächerübergreifender Unterricht" Y1 - 2000 SN - 3-88120-314-1 ER - TY - JOUR A1 - Schwill, Andreas T1 - Modellbildung im Schulfach Informatik Y1 - 2000 SN - 3-88120-301-x ER - TY - BOOK A1 - Schwill, Andreas A1 - Claus, Volker T1 - Duden Informatik : ein Fachlexikon für Studium und Praxis N2 - Die Informatik durchdringt zusehends fast alle Bereiche der Ausbildung und der Berufswelt. Die Stichwörter berücksichtigen die Geschichte der Informatik und den heutigen Stand ihrer Methoden und beziehen aktuelle und absehbare Entwicklungen mit ein. Das ausführliche Register sorgt dafür, dass man den gewünschten Begriff sofort im Blick hat. Rund 3 000 Stichwörter, etwa 700 Abbildungen, Register. Y1 - 2001 SN - 3-411-05233-3 PB - Dudenverl. CY - Mannheim ER - TY - GEN A1 - Schäpers, Björn A1 - Niemueller, Tim A1 - Lakemeyer, Gerhard A1 - Gebser, Martin A1 - Schaub, Torsten H. T1 - ASP-Based Time-Bounded Planning for Logistics Robots T2 - Twenty-Eighth International Conference on Automated Planning and Scheduling (ICAPS 2018) N2 - Manufacturing industries are undergoing a major paradigm shift towards more autonomy. Automated planning and scheduling then becomes a necessity. The Planning and Execution Competition for Logistics Robots in Simulation held at ICAPS is based on this scenario and provides an interesting testbed. However, the posed problem is challenging as also demonstrated by the somewhat weak results in 2017. The domain requires temporal reasoning and dealing with uncertainty. We propose a novel planning system based on Answer Set Programming and the Clingo solver to tackle these problems and incentivize robot cooperation. Our results show a significant performance improvement, both, in terms of lowering computational requirements and better game metrics. Y1 - 2018 SN - 2334-0835 SN - 2334-0843 SP - 509 EP - 517 PB - ASSOC Association for the Advancement of Artificial Intelligence CY - Palo Alto ER - TY - THES A1 - Schöbel, Michael T1 - Verarbeitung von Ereignisströmen im Betriebssystemkern Y1 - 2010 SN - 978-3-869555-601-7 PB - Cuvillier CY - Göttingen ER - TY - JOUR A1 - Schöbel, Michael T1 - A runtime environment for online processing of operating system kernel events Y1 - 2010 SN - 978-3-86956-036-6 ER - TY - THES A1 - Schünemann, Björn T1 - The V2X simulation runtime infrastructure: VSimRTI Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Schütt, Christine T1 - Identification of differentially expressed genes JF - Process design for natural scientists: an agile model-driven approach N2 - With the jABC it is possible to realize workflows for numerous questions in different fields. The goal of this project was to create a workflow for the identification of differentially expressed genes. This is of special interest in biology, for it gives the opportunity to get a better insight in cellular changes due to exogenous stress, diseases and so on. With the knowledge that can be derived from the differentially expressed genes in diseased tissues, it becomes possible to find new targets for treatment. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 127 EP - 139 PB - Springer CY - Berlin ER - TY - CHAP A1 - Seegerer, Stefan A1 - Romeike, Ralf A1 - Tillmann, Alexander A1 - Krömker, Detlef A1 - Horn, Florian A1 - Gattinger, Thorsten A1 - Weicker, Karsten A1 - Schmitz, Dennis A1 - Moldt, Daniel A1 - Röpke, René A1 - Larisch, Kathrin A1 - Schroeder, Ulrik A1 - Keverpütz, Claudia A1 - Küppers, Bastian A1 - Striewe, Michael A1 - Kramer, Matthias A1 - Grillenberger, Andreas A1 - Frede, Christiane A1 - Knobelsdorf, Maria A1 - Greven, Christoph ED - Bergner, Nadine ED - Röpke, René ED - Schroeder, Ulrik ED - Krömker, Detlef T1 - Hochschuldidaktik der Informatik HDI 2018 BT - 8. Fachtagung des GI-Fachbereichs Informatik und Ausbildung/Didaktik der Informatik ; 12.-13. September 2018 an der Goethe-Universität Frankfurt am Main T2 - Commentarii informaticae didacticae (CID) N2 - Die 8. Fachtagung für Hochschuldidaktik der Informatik (HDI) fand im September 2018 zusammen mit der Deutschen E-Learning Fachtagung Informatik (DeLFI) unter dem gemeinsamen Motto „Digitalisierungswahnsinn? - Wege der Bildungstransformationen“ in Frankfurt statt. Dabei widmet sich die HDI allen Fragen der informatischen Bildung im Hochschulbereich. Schwerpunkte bildeten in diesem Jahr u. a.: - Analyse der Inhalte und anzustrebenden Kompetenzen in Informatikveranstaltungen - Programmieren lernen & Einstieg in Softwareentwicklung - Spezialthemen: Data Science, Theoretische Informatik und Wissenschaftliches Arbeiten Die Fachtagung widmet sich ausgewählten Fragestellungen dieser Themenkomplexe, die durch Vorträge ausgewiesener Experten und durch eingereichte Beiträge intensiv behandelt werden. T3 - Commentarii informaticae didacticae (CID) - 12 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-413542 SN - 978-3-86956-435-7 SN - 1868-0844 SN - 2191-1940 IS - 12 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Seibel, Andreas T1 - Traceability and model management with executable and dynamic hierarchical megamodels T1 - Traceability und Modell Management mit ausführbaren und dynamischen Megamodellen N2 - Nowadays, model-driven engineering (MDE) promises to ease software development by decreasing the inherent complexity of classical software development. In order to deliver on this promise, MDE increases the level of abstraction and automation, through a consideration of domain-specific models (DSMs) and model operations (e.g. model transformations or code generations). DSMs conform to domain-specific modeling languages (DSMLs), which increase the level of abstraction, and model operations are first-class entities of software development because they increase the level of automation. Nevertheless, MDE has to deal with at least two new dimensions of complexity, which are basically caused by the increased linguistic and technological heterogeneity. The first dimension of complexity is setting up an MDE environment, an activity comprised of the implementation or selection of DSMLs and model operations. Setting up an MDE environment is both time-consuming and error-prone because of the implementation or adaptation of model operations. The second dimension of complexity is concerned with applying MDE for actual software development. Applying MDE is challenging because a collection of DSMs, which conform to potentially heterogeneous DSMLs, are required to completely specify a complex software system. A single DSML can only be used to describe a specific aspect of a software system at a certain level of abstraction and from a certain perspective. Additionally, DSMs are usually not independent but instead have inherent interdependencies, reflecting (partial) similar aspects of a software system at different levels of abstraction or from different perspectives. A subset of these dependencies are applications of various model operations, which are necessary to keep the degree of automation high. This becomes even worse when addressing the first dimension of complexity. Due to continuous changes, all kinds of dependencies, including the applications of model operations, must also be managed continuously. This comprises maintaining the existence of these dependencies and the appropriate (re-)application of model operations. The contribution of this thesis is an approach that combines traceability and model management to address the aforementioned challenges of configuring and applying MDE for software development. The approach is considered as a traceability approach because it supports capturing and automatically maintaining dependencies between DSMs. The approach is considered as a model management approach because it supports managing the automated (re-)application of heterogeneous model operations. In addition, the approach is considered as a comprehensive model management. Since the decomposition of model operations is encouraged to alleviate the first dimension of complexity, the subsequent composition of model operations is required to counteract their fragmentation. A significant portion of this thesis concerns itself with providing a method for the specification of decoupled yet still highly cohesive complex compositions of heterogeneous model operations. The approach supports two different kinds of compositions - data-flow compositions and context compositions. Data-flow composition is used to define a network of heterogeneous model operations coupled by sharing input and output DSMs alone. Context composition is related to a concept used in declarative model transformation approaches to compose individual model transformation rules (units) at any level of detail. In this thesis, context composition provides the ability to use a collection of dependencies as context for the composition of other dependencies, including model operations. In addition, the actual implementation of model operations, which are going to be composed, do not need to implement any composition concerns. The approach is realized by means of a formalism called an executable and dynamic hierarchical megamodel, based on the original idea of megamodels. This formalism supports specifying compositions of dependencies (traceability and model operations). On top of this formalism, traceability is realized by means of a localization concept, and model management by means of an execution concept. N2 - Die modellgetriebene Softwareentwicklung (MDE) verspricht heutzutage, durch das Verringern der inhärenten Komplexität der klassischen Softwareentwicklung, das Entwickeln von Software zu vereinfachen. Um dies zu erreichen, erhöht MDE das Abstraktions- und Automationsniveau durch die Einbindung domänenspezifischer Modelle (DSMs) und Modelloperationen (z.B. Modelltransformationen oder Codegenerierungen). DSMs sind konform zu domänenspezifischen Modellierungssprachen (DSMLs), die dazu dienen das Abstraktionsniveau der Softwareentwicklung zu erhöhen. Modelloperationen sind essentiell für die Softwareentwicklung da diese den Grad der Automatisierung erhöhen. Dennoch muss MDE mit Komplexitätsdimensionen umgehen die sich grundsätzlich aus der erhöhten sprachlichen und technologischen Heterogenität ergeben. Die erste Komplexitätsdimension ist das Konfigurieren einer Umgebung für MDE. Diese Aktivität setzt sich aus der Implementierung und Selektion von DSMLs sowie Modelloperationen zusammen. Eine solche Aktivität ist gerade durch die Implementierung und Anpassung von Modelloperationen zeitintensiv sowie fehleranfällig. Die zweite Komplexitätsdimension hängt mit der Anwendung von MDE für die eigentliche Softwareentwicklung zusammen. Das Anwenden von MDE ist eine Herausforderung weil eine Menge von heterogenen DSMs, die unterschiedlichen DSMLs unterliegen, erforderlich sind um ein komplexes Softwaresystem zu spezifizieren. Individuelle DSMLs werden verwendet um spezifische Aspekte eines Softwaresystems auf bestimmten Abstraktionsniveaus und aus bestimmten Perspektiven zu beschreiben. Hinzu kommt, dass DSMs sowie DSMLs grundsätzlich nicht unabhängig sind, sondern inhärente Abhängigkeiten besitzen. Diese Abhängigkeiten reflektieren äquivalente Aspekte eines Softwaresystems. Eine Teilmenge dieser Abhängigkeiten reflektieren Anwendungen diverser Modelloperationen, die notwendig sind um den Grad der Automatisierung hoch zu halten. Dies wird erschwert wenn man die erste Komplexitätsdimension hinzuzieht. Aufgrund kontinuierlicher Änderungen der DSMs, müssen alle Arten von Abhängigkeiten, inklusive die Anwendung von Modelloperationen, kontinuierlich verwaltet werden. Dies beinhaltet die Wartung dieser Abhängigkeiten und das sachgerechte (wiederholte) Anwenden von Modelloperationen. Der Beitrag dieser Arbeit ist ein Ansatz, der die Bereiche Traceability und Model Management vereint. Das Erfassen und die automatische Verwaltung von Abhängigkeiten zwischen DSMs unterstützt Traceability, während das (automatische) wiederholte Anwenden von heterogenen Modelloperationen Model Management ermöglicht. Dadurch werden die zuvor erwähnten Herausforderungen der Konfiguration und Anwendung von MDE überwunden. Die negativen Auswirkungen der ersten Komplexitätsdimension können gelindert werden indem Modelloperationen in atomare Einheiten zerlegt werden. Um der implizierten Fragmentierung entgegenzuwirken, erfordert dies allerdings eine nachfolgende Komposition der Modelloperationen. Der Ansatz wird als erweitertes Model Management betrachtet, da ein signifikanter Anteil dieser Arbeit die Kompositionen von heterogenen Modelloperationen behandelt. Unterstützt werden zwei unterschiedliche Arten von Kompositionen. Datenfluss-Kompositionen werden verwendet, um Netzwerke von heterogenen Modelloperationen zu beschreiben, die nur durch das Teilen von Ein- und Ausgabe DSMs komponiert werden. Kontext-Kompositionen bedienen sich eines Konzepts, das von deklarativen Modelltransformationen bekannt ist. Dies ermöglicht die Komposition von unabhängigen Transformationsregeln auf unterschiedlichsten Detailebenen. Die in dieser Arbeit eingeführten Kontext-Kompositionen bieten die Möglichkeit eine Menge von unterschiedlichsten Abhängigkeiten als Kontext für eine Komposition zu verwenden -- unabhängig davon ob diese Abhängigkeit eine Modelloperation repräsentiert. Zusätzlich müssen die Modelloperationen, die komponiert werden, selber keine Kompositionsaspekte implementieren, was deren Wiederverwendbarkeit erhöht. Realisiert wird dieser Ansatz durch einen Formalismus der Executable and Dynamic Hierarchical Megamodel genannt wird und auf der originalen Idee der Megamodelle basiert. Auf Basis dieses Formalismus' sind die Konzepte Traceability (hier Localization) und Model Management (hier Execution) umgesetzt. KW - Traceability KW - Modell Management KW - Megamodell KW - Modellgetriebene Entwicklung KW - Komposition KW - Traceability KW - Model Management KW - Megamodel KW - Model-Driven Engineering KW - Composition Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64222 ER - TY - THES A1 - Semmo, Amir T1 - Design and implementation of non-photorealistic rendering techniques for 3D geospatial data T1 - Design und Implementierung von nichtfotorealistischen Rendering-Techniken für 3D-Geodaten N2 - Geospatial data has become a natural part of a growing number of information systems and services in the economy, society, and people's personal lives. In particular, virtual 3D city and landscape models constitute valuable information sources within a wide variety of applications such as urban planning, navigation, tourist information, and disaster management. Today, these models are often visualized in detail to provide realistic imagery. However, a photorealistic rendering does not automatically lead to high image quality, with respect to an effective information transfer, which requires important or prioritized information to be interactively highlighted in a context-dependent manner. Approaches in non-photorealistic renderings particularly consider a user's task and camera perspective when attempting optimal expression, recognition, and communication of important or prioritized information. However, the design and implementation of non-photorealistic rendering techniques for 3D geospatial data pose a number of challenges, especially when inherently complex geometry, appearance, and thematic data must be processed interactively. Hence, a promising technical foundation is established by the programmable and parallel computing architecture of graphics processing units. This thesis proposes non-photorealistic rendering techniques that enable both the computation and selection of the abstraction level of 3D geospatial model contents according to user interaction and dynamically changing thematic information. To achieve this goal, the techniques integrate with hardware-accelerated rendering pipelines using shader technologies of graphics processing units for real-time image synthesis. The techniques employ principles of artistic rendering, cartographic generalization, and 3D semiotics—unlike photorealistic rendering—to synthesize illustrative renditions of geospatial feature type entities such as water surfaces, buildings, and infrastructure networks. In addition, this thesis contributes a generic system that enables to integrate different graphic styles—photorealistic and non-photorealistic—and provide their seamless transition according to user tasks, camera view, and image resolution. Evaluations of the proposed techniques have demonstrated their significance to the field of geospatial information visualization including topics such as spatial perception, cognition, and mapping. In addition, the applications in illustrative and focus+context visualization have reflected their potential impact on optimizing the information transfer regarding factors such as cognitive load, integration of non-realistic information, visualization of uncertainty, and visualization on small displays. N2 - Geodaten haben sich zu einem natürlichen Bestandteil in einer steigenden Zahl von Informationssystemen und -diensten in der Wirtschaft, Gesellschaft und im Privatleben entwickelt. Virtuelle 3D-Stadt- und Landschaftsmodelle stellen hierbei insbesondere wertvolle Informationsquellen in einer Vielzahl von Anwendungen dar, wie z. B. in der Stadtplanung, Navigation, Touristeninformation und im Katastrophenschutz. Heutzutage werden diese Modelle oftmals detailliert dargestellt, um ein möglichst realistisches Bild zu vermitteln. Jedoch führt eine fotorealistische Darstellung, hinsichtlich einem effektiven Informationstransfer zum Betrachter, nicht zwangsläufig zu einer hohen Bildqualität, welche eine interaktive und kontextsensitive Hervorhebung von wichtigen oder priorisierten Informationen erfordert. Ansätze in der nichtfotorealistischen Bildsynthese berücksichtigen insbesondere die Aufgabe eines Nutzers und Kameraperspektive, um Aspekte der Expressivität, Wahrnehmung und Kommunikation von wichtigen oder priorisierten Informationen zu optimieren. Das Design und die Umsetzung von Techniken der nichtfotorealistischen Bildsynthese für 3D-Geodaten sind jedoch mit einer Vielzahl von Herausforderungen konfrontiert, besonders dann, wenn die Geometrie, das Erscheinungsbild und thematische Daten interaktiv verarbeitet werden müssen. Infolgedessen stellt die programmierbare Architektur und parallelisierte Datenverarbeitung von Grafik-prozessoren eine vielversprechende technische Grundlage zur Verfügung. Diese Arbeit präsentiert Techniken der nichtfotorealistischen Bildsynthese, die den Abstraktionsgrad von Inhalten raumbezogener 3D-Modelle, entsprechend der Nutzerinteraktion und dynamisch-veränderbaren thematischen Informationen, berechnet und auswählt. Hierzu sind die vorgestellten Techniken in die hardwarebeschleunigte Rendering-Pipeline integriert, unter Verwendung der Shader-Technologie von Grafikprozessoren, um eine Echtzeit-Bildsynthese zu gewährleisten. Dabei werden Prinzipien der künstlerischen Darstellung, Aspekte der kartographischen Generalisierung sowie 3D Semiotik verwendet—im Gegensatz zur fotorealistischen Bildsynthese—um illustrative Darstellungen von raumbezogenen Feature-Typ-Entitäten zu synthetisieren, z. B. von Wasserflächen, Gebäuden und Infrastrukturnetzen. Darüber hinaus stellt diese Arbeit ein generisches System vor, welches die Integration verschiedener Grafikstile—fotorealistisch und nichtfotorealistisch—und ihren nahtlosen Übergang, entsprechend von Nutzeraufgaben, Kameraansichten und Bildauflösungen, ermöglicht. Evaluierungen der in dieser Arbeit vorgestellten Techniken haben ihre Bedeutung im Bereich der Informationsvisualisierung von raumbezogenen Daten aufgezeigt, einschließlich Themengebiete der räumlichen Wahrnehmung, Kognition und Kartierung. Darüber hinaus haben Anwendungen im Bereich der illustrativen Visualisierung und Fokus-&-Kontext Visualisierung den potentiellen Einfluss dieser Techniken, in Bezug auf die Optimierung des Informationstransfers zum Nutzer, demonstriert, z. B. hinsichtlich der kognitiven Last, der Integration nichtrealistischer Informationen, der Visualisierung von Unsicherheiten und der Visualisierung auf kleinen Bildschirmen. KW - non-photorealistic rendering KW - geospatial data KW - 3D visualization KW - GPU KW - image processing KW - stylization KW - 3D semiotics KW - cartographic design KW - Nichtfotorealistische Bildsynthese KW - Geodaten KW - 3D Visualisierung KW - GPU KW - Bildverarbeitung KW - Stilisierung KW - 3D Semiotik KW - Kartografisches Design Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99525 ER - TY - JOUR A1 - Sens, Henriette T1 - Web-Based map generalization tools put to the test: a jABC workflow JF - Process Design for Natural Scientists: an agile model-driven approach N2 - Geometric generalization is a fundamental concept in the digital mapping process. An increasing amount of spatial data is provided on the web as well as a range of tools to process it. This jABC workflow is used for the automatic testing of web-based generalization services like mapshaper.org by executing its functionality, overlaying both datasets before and after the transformation and displaying them visually in a .tif file. Mostly Web Services and command line tools are used to build an environment where ESRI shapefiles can be uploaded, processed through a chosen generalization service and finally visualized in Irfanview. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 175 EP - 185 PB - Springer CY - Berlin ER - TY - THES A1 - Seuring, Markus T1 - Output space compaction for testing and concurrent checking N2 - In der Dissertation werden neue Entwurfsmethoden für Kompaktoren für die Ausgänge von digitalen Schaltungen beschrieben, die die Anzahl der zu testenden Ausgänge drastisch verkleinern und dabei die Testbarkeit der Schaltungen nur wenig oder gar nicht verschlechtern. Der erste Teil der Arbeit behandelt für kombinatorische Schaltungen Methoden, die die Struktur der Schaltungen beim Entwurf der Kompaktoren berücksichtigen. Verschiedene Algorithmen zur Analyse von Schaltungsstrukturen werden zum ersten Mal vorgestellt und untersucht. Die Komplexität der vorgestellten Verfahren zur Erzeugung von Kompaktoren ist linear bezüglich der Anzahl der Gatter in der Schaltung und ist damit auf sehr große Schaltungen anwendbar. Im zweiten Teil wird erstmals ein solches Verfahren für sequentielle Schaltkreise beschrieben. Dieses Verfahren baut im wesentlichen auf das erste auf. Der dritte Teil beschreibt eine Entwurfsmethode, die keine Informationen über die interne Struktur der Schaltung oder über das zugrundeliegende Fehlermodell benötigt. Der Entwurf basiert alleine auf einem vorgegebenen Satz von Testvektoren und die dazugehörenden Testantworten der fehlerfreien Schaltung. Ein nach diesem Verfahren erzeugter Kompaktor maskiert keinen der Fehler, die durch das Testen mit den vorgegebenen Vektoren an den Ausgängen der Schaltung beobachtbar sind. N2 - The objective of this thesis is to provide new space compaction techniques for testing or concurrent checking of digital circuits. In particular, the work focuses on the design of space compactors that achieve high compaction ratio and minimal loss of testability of the circuits. In the first part, the compactors are designed for combinational circuits based on the knowledge of the circuit structure. Several algorithms for analyzing circuit structures are introduced and discussed for the first time. The complexity of each design procedure is linear with respect to the number of gates of the circuit. Thus, the procedures are applicable to large circuits. In the second part, the first structural approach for output compaction for sequential circuits is introduced. Essentially, it enhances the first part. For the approach introduced in the third part it is assumed that the structure of the circuit and the underlying fault model are unknown. The space compaction approach requires only the knowledge of the fault-free test responses for a precomputed test set. The proposed compactor design guarantees zero-aliasing with respect to the precomputed test set. KW - digital circuit KW - output space compaction KW - zero-aliasing KW - test KW - concurrent checking KW - propagation probability KW - IP core Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000165 ER - TY - JOUR A1 - Seuring, Markus T1 - Built-in self test mit multi-mode scannable memory elementen Y1 - 1999 ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael T1 - A structural approach for space compaction for sequential circuits Y1 - 1999 ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael T1 - A structural method for output compaction of sequential automata implemented as circuits Y1 - 1999 ER - TY - BOOK A1 - Seuring, Markus A1 - Gössel, Michael T1 - A structural approach for space compaction for sequential circuits T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1998 SN - 0946-7580 VL - 1998, 05 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael A1 - Sogomonyan, Egor S. T1 - Ein strukturelles Verfahren zur Kompaktierung von Schaltungsausgaben für online-Fehlererkennungen und Selbstests Y1 - 1998 ER - TY - JOUR A1 - Seuring, Markus A1 - Gössel, Michael A1 - Sogomonyan, Egor S. T1 - A structural approach for space compaction for concurrent checking and BIST Y1 - 1998 ER - TY - BOOK A1 - Seuring, Markus A1 - Gössel, Michael A1 - Sogomonyan, Egor S. T1 - A structural approach for space compaction for concurrent checking and BIST T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1997 SN - 0946-7580 VL - 1997, 01 PB - Univ. Potsdam CY - Potsdam [u.a.] ER - TY - JOUR A1 - Shenoy, Pradeep A1 - Krauledat, Matthias A1 - Blankertz, Benjamin A1 - Rao, Rajesh P. N. A1 - Müller, Klaus-Robert T1 - Towards adaptive classification for BCI N2 - Non-stationarities are ubiquitous in EEG signals. They are especially apparent in the use of EEG-based brain- computer interfaces (BCIs): (a) in the differences between the initial calibration measurement and the online operation of a BCI, or (b) caused by changes in the subject's brain processes during an experiment (e.g. due to fatigue, change of task involvement, etc). In this paper, we quantify for the first time such systematic evidence of statistical differences in data recorded during offline and online sessions. Furthermore, we propose novel techniques of investigating and visualizing data distributions, which are particularly useful for the analysis of (non-) stationarities. Our study shows that the brain signals used for control can change substantially from the offline calibration sessions to online control, and also within a single session. In addition to this general characterization of the signals, we propose several adaptive classification schemes and study their performance on data recorded during online experiments. An encouraging result of our study is that surprisingly simple adaptive methods in combination with an offline feature selection scheme can significantly increase BCI performance Y1 - 2006 UR - http://iopscience.iop.org/1741-2552/3/1/R02/ U6 - https://doi.org/10.1088/1741-2560/3/1/R02 ER - TY - JOUR A1 - Singh, Adit D. A1 - Sogomonyan, Egor S. A1 - Gössel, Michael A1 - Seuring, Markus T1 - Testability evaluation of sequential designs incorporating the multi-mode scannable memory element Y1 - 1999 ER - TY - THES A1 - Smirnov, Sergey T1 - Business process model abstraction T1 - Abstraktion von Geschäftsprozessmodellen N2 - Business process models are used within a range of organizational initiatives, where every stakeholder has a unique perspective on a process and demands the respective model. As a consequence, multiple process models capturing the very same business process coexist. Keeping such models in sync is a challenge within an ever changing business environment: once a process is changed, all its models have to be updated. Due to a large number of models and their complex relations, model maintenance becomes error-prone and expensive. Against this background, business process model abstraction emerged as an operation reducing the number of stored process models and facilitating model management. Business process model abstraction is an operation preserving essential process properties and leaving out insignificant details in order to retain information relevant for a particular purpose. Process model abstraction has been addressed by several researchers. The focus of their studies has been on particular use cases and model transformations supporting these use cases. This thesis systematically approaches the problem of business process model abstraction shaping the outcome into a framework. We investigate the current industry demand in abstraction summarizing it in a catalog of business process model abstraction use cases. The thesis focuses on one prominent use case where the user demands a model with coarse-grained activities and overall process ordering constraints. We develop model transformations that support this use case starting with the transformations based on process model structure analysis. Further, abstraction methods considering the semantics of process model elements are investigated. First, we suggest how semantically related activities can be discovered in process models-a barely researched challenge. The thesis validates the designed abstraction methods against sets of industrial process models and discusses the method implementation aspects. Second, we develop a novel model transformation, which combined with the related activity discovery allows flexible non-hierarchical abstraction. In this way this thesis advocates novel model transformations that facilitate business process model management and provides the foundations for innovative tool support. N2 - Geschäftsprozessmodelle werden in einer Fülle organisatorischer Initiativen eingesetzt, wobei verschiedene Stakeholder individuelle Ansprüche an die Sicht auf den jeweiligen Prozess haben. Dies führt dazu, dass zu einem Geschäftsprozess eine Vielzahl unterschiedlicher Modelle existiert. In einer sich ständig verändernden Geschäftsumgebung ist es daher schwierig, diese Vielzahl von Modellen konsistent zu halten: Ändert sich sich ein Prozess, müssen alle Modelle, die ihn beschreiben, aktualisiert werden. Aufgrund der schieren Menge an Prozessmodellen und ihrer komplexen Beziehungen zueinander, erhöhen sich Aufwand und Kosten zur Pflege aller Modelle enorm. Vor diesem Hintergrund ermöglicht die Abstraktion von Geschäftsprozessmodellen, die Menge der Modelle zu reduzieren und damit ihre Verwaltung zu vereinfachen. Abstraktion von Geschäftsprozessmodellen bezeichnet eine Transformation eines Prozessmodells, so dass es für einen bestimmten Zweck besonders geeignet ist. Bei der Abstraktion von Geschäftsprozessen bleiben essentielle Eigenschaften eines Modells erhalten, während irrelevante Eigenschaften verworfen werden. Mehrere Studien stellen Prozessmodellabstraktion in den Fokus und konzentrieren sich auf konkrete Anwendungsfälle, für die sie geeignete Transformationen entwickelt haben. Diese Dissertation untersucht das Problem der Prozessmodellabstraktion und systematisiert die Lösung in einem Framework. Aktuelle Anforderungen der Industrie an die Abstraktion von Prozessmodellen wurden recherchiert und in einem Katalog von Anwendungsfällen zusammengefasst, von denen ein besonderer für die weiteren Untersuchungen ausgewählt wurde. In diesem Fall erwartet der Nutzer ein Modell niedrigeren Detailgrades, in welchem die Kontrollflussbeziehungen des Ursprungsmodells erhalten bleiben. Beginnend bei Modelltransformationen, die auf der Analyse der Prozessmodellstruktur aufbauen, entwickeln wir neuartige Abstraktionsoperationen zur Unterstützung dieses Anwendungsfalles. Darüber hinaus untersuchen wir Abstraktionsmethoden, welche die Semantik von Prozessmodellelementen berücksichtigen. Zum einen zeigen wir, wie Aktivitäten ermittelt werden können, die miteinander in semantischer Beziehung stehen - ein Problem, das bisher nur unzureichend betrachtet wurde. Die vorgeschlagenen Methoden werden mithilfe industrieller Prozessmodellsammlungen validiert und deren Umsetzung diskutiert. Zum anderen schlagen wir eine innovative Modelltransformation zur nicht-hierarchischen Abstraktion von Prozessmodellen vor. Dieser liegt die Ermittlung in Beziehung stehender Aktivitäten zugrunde. Demzufolge präsentiert diese Arbeit eine originäre Methode zur Prozessmodellabstraktion, die die Verwaltung von Geschäftsprozessmodellen vereinfacht und den Grundstein für innovative Softwarewerkzeuge legt. KW - Abstraktion KW - Prozess KW - Modell KW - Transformation KW - Komplexität KW - abstraction KW - process KW - model KW - transformation KW - complexity Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60258 ER - TY - JOUR A1 - Sogomonyan, Egor S. A1 - Gössel, Michael T1 - Concurrently self-testing embedded checkers for ultra-reliable fault-tolerant systems Y1 - 1996 ER - TY - JOUR A1 - Sogomonyan, Egor S. A1 - Gössel, Michael T1 - A new parity preserving multi-input signature analyser Y1 - 1995 ER - TY - BOOK A1 - Sogomonyan, Egor S. A1 - Marienfeld, Daniel A1 - Gössel, Michael T1 - Fehlerkorrektur und Fehlererkennung T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 2006 SN - 0946-7580 VL - 2006, 3 PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Sogomonyan, Egor S. A1 - Marienfeld, Daniel A1 - Ocheretnij, V. A1 - Gössel, Michael T1 - A new self-checking sum-bit duplicated carry-select adder T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 2003 SN - 0946-7580 VL - 2003, 5 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Sogomonyan, Egor S. A1 - Singh, Adit D. A1 - Gössel, Michael T1 - A multi-mode scannable memory element for high test application efficiency and delay testing Y1 - 1998 ER - TY - JOUR A1 - Sogomonyan, Egor S. A1 - Singh, Adit D. A1 - Gössel, Michael T1 - A scan based concrrent BIST approach for low cost on-line testing Y1 - 1998 ER - TY - JOUR A1 - Sogomonyan, Egor S. A1 - Singh, Adit D. A1 - Gössel, Michael T1 - A multi-mode scannable memory element for high test application efficiency and delay testing Y1 - 1999 ER - TY - JOUR A1 - Sommerfeld, Erdmute T1 - Operations on cognitive structures : their modelling on the basis of graph theory Y1 - 1994 ER - TY - BOOK A1 - Späth, Daniela T1 - Uni goes Facebook : Evaluatonsstudie zur Förderung von Kooperativen Lernprozessen mithilfe des Tools virtPresenter : eLearning UP 2009 : Sonderveranstaltung 2009-11-25 Y1 - 2009 UR - http://info.ub.uni-potsdam.de/multimedia/show_projekt.php?projekt_id=55 PB - Univ.-Bibl. CY - Potsdam ER - TY - JOUR A1 - Srinivasan, K. A1 - Senthilkumar, D. V. A1 - Mohamed, I. Raja A1 - Murali, K. A1 - Lakshmanan, M. A1 - Kurths, Jürgen T1 - Anticipating, complete and lag synchronizations in RC phase-shift network based coupled Chua's circuits without delay JF - Chaos : an interdisciplinary journal of nonlinear science N2 - We construct a new RC phase shift network based Chua's circuit, which exhibits a period-doubling bifurcation route to chaos. Using coupled versions of such a phase-shift network based Chua's oscillators, we describe a new method for achieving complete synchronization (CS), approximate lag synchronization (LS), and approximate anticipating synchronization (AS) without delay or parameter mismatch. Employing the Pecora and Carroll approach, chaos synchronization is achieved in coupled chaotic oscillators, where the drive system variables control the response system. As a result, AS or LS or CS is demonstrated without using a variable delay line both experimentally and numerically. Y1 - 2012 U6 - https://doi.org/10.1063/1.4711375 SN - 1054-1500 VL - 22 IS - 2 PB - American Institute of Physics CY - Melville ER - TY - BOOK A1 - Stechert, Peer T1 - Fachdidaktische Diskussion von Informatiksystemen und der Kompetenzentwicklung im Informatikunterricht N2 - In der vorliegenden Arbeit wird ein Unterrichtsmodell zur Kompetenzentwicklung mit Informatiksystemen für die Sekundarstufe II vorgestellt. Der Bedarf wird u. a. damit begründet, dass Informatiksysteme zu Beginn des 21. Jahrhunderts allgegenwärtig sind (Kapitel 1). Für Kompetenzentwicklung mit Informatiksystemen sind diese in ihrer Einheit aus Hardware, Software und Vernetzung anhand ihres nach außen sichtbaren Verhaltens, der inneren Struktur und Implementierungsaspekten zu analysieren. Ausgehend vom Kompetenzbegriff (Kapitel 2) und dem Informatiksystembegriff (Kapitel 3) erfolgt eine Analyse des fachdidaktischen Forschungsstandes zur Kompetenzentwicklung mit Informatiksystemen. Die Ergebnisse lassen sich in die Bereiche (1) Bildungsziele, (2) Unterrichtsinhalte, (3) Lehr-Lernmethodik und (4) Lehr-Lernmedien aufteilen (Kapitel 4). In Kapitel 5 wird die Unterrichtsmodellentwicklung beschrieben. Den Zugang zu Informatiksystemen bildet in der vorliegenden Dissertationsschrift das nach außen sichtbare Verhalten. Es erfolgt eine Fokussierung auf vernetzte fundamentale Ideen der Informatik und Strukturmodelle von Informatiksystemen als Unterrichtsinhalte. Es wird begründet, dass ausgewählte objektorientierte Entwurfsmuster vernetzte fundamentale Ideen repräsentieren. In Abschnitt 5.4 werden dementsprechend Entwurfsmuster als Wissensrepräsentation für vernetzte fundamentale Ideen klassifiziert. Das systematische Erkunden des Verhaltens von Informatiksystemen wird im Informatikunterricht bisher kaum thematisiert. Es werden Schülertätigkeiten in Anlehnung an Unterrichtsexperimente angegeben, die Schüler unterstützen, Informatiksysteme bewusst und gezielt anzuwenden (Abschnitt 5.5). Bei dieser Lehr-Lernmethodik werden das nach außen sichtbare Verhalten von Informatiksystemen, im Sinne einer Black-Box, und das Wechselspiel von Verhalten und Struktur bei vorliegender Implementierung des Systems als White-Box analysiert. Die Adressierung schrittweise höherer kognitiver Niveaustufen wird in die Entwicklung einbezogen. Unterstützend wird für das Unterrichtsmodell lernförderliche Software gestaltet, die vernetzte fundamentale Ideen in Entwurfsmustern und das Experimentieren aufgreift (Abschnitt 5.6). Schwerpunkte bilden im Unterrichtsmodell zwei Arten von lernförderlicher Software: (1) Die Lernsoftware Pattern Park wurde von einer studentischen Projektgruppe entwickelt. In ihr können in Entwurfsmustern enthaltene fundamentale Ideen der Informatik über ihren Lebensweltbezug im Szenario eines Freizeitparks analysiert werden. (2) Als weitere Art Lernsoftware werden kleine Programme eingesetzt, deren innere Struktur durch ausgewählte Entwurfsmuster gebildet und deren Verhalten direkt durch die darin enthaltenen fundamentalen Ideen bestimmt wird. Diese Programme können durch die Experimente im Unterricht systematisch untersucht werden. Mit dem Ziel, die normative Perspektive um Rückkopplung mit der Praxis zu ergänzen, werden zwei Erprobungen im Informatikunterricht vorgenommen. Diese liefern Erkenntnisse zur Machbarkeit des Unterrichtsmodells und dessen Akzeptanz durch die Schüler (Kapitel 6 und 8). Exemplarisch umgesetzt werden die Themen Zugriffskontrolle mit dem Proxymuster, Iteration mit dem Iteratormuster und Systemzustände mit dem Zustandsmuster. Der intensive Austausch mit Informatiklehrpersonen in der Kooperationsschule über Informatiksysteme und Kompetenzentwicklung sowie die Durchführung von zwei Lehrerfortbildungen ergänzen die Beobachtungen im unterrichtlichen Geschehen. Die erste Unterrichtserprobung resultiert in einer Weiterentwicklung des Unterrichtsmodells zu Informatiksystemen und Kompetenzentwicklung (Kapitel 7). Darin erfolgt eine Fokussierung auf das nach außen sichtbare Verhalten von Informatiksystemen und eine Verfeinerung der Perspektiven auf innere Struktur und ausgewählte Implementierungsaspekte. Anschließend wird die zweite Unterrichtserprobung durchgeführt und evaluiert (Kapitel 8). Am Schluss der Forschungsarbeit steht ein in empirischen Phasen erprobtes Unterrichtsmodell. N2 - In the 21st century, informatics systems are ubiquitous. Therefore, the author presents an educational model for competencies with respect to informatics systems (Chapter 1). To achieve such competencies at upper secondary level, observable behaviour, internal structure and implementation aspects of informatics systems have to be analysed by students. Based on a definition of the terms competency (Chapter 2) and informatics system (Chapter 3), the state of the art in Didactics of Informatics is investigated. In the national and international scientific work, (1) educational objectives, (2) themes and subject matters, (3) teaching and learning methods, as well as (4) educational means and media are identified (Chapter 4). In Chapter 5 the development of the educational model is described. The approach to competencies with respect to informatics systems concentrates on the observable behaviour of the systems. We focus on networked fundamental ideas of informatics as a quality factor and structural models of informatics systems. Selected object-oriented design patterns represent networked fundamental ideas. In Section 5.4 design patterns as knowledge representations of fundamental ideas are classified. Systematic exploration of informatics systems is uncommon in informatics education at upper secondary level. Therefore, students' activities are developed according to educational experiments to enable students to use systems consciously (Section 5.5). Systematic exploration puts students in a position to analyse the observable behaviour as a black box. Given the source code and documentation of a system, experimenting with such a system relates behaviour to its internal structure. Succeeding cognitive processes are also considered in this approach. To support learning, software was developed, which emphasises fundamental ideas in design patterns and enables experimenting (Section 5.6). There are two kinds of learning software: (1) The learning software Pattern Park was developed by a student project group. In the software fundamental ideas within design patterns can be understood through a real-life analogy in the context of a theme park. (2) As a second kind of learning software we use small programs, whose internal structure is built by selected design patterns. Their observable behaviour depends on networked fundamental ideas of informatics. These programs can be analysed systematically by students. Aiming at complementing the normative perspective with concrete learning processes, two classroom practice projects were conducted. These offered results with respect to feasibility of the educational model and acceptance by the students (Chapter 6 and 8). Exemplarily, access control by Proxy design pattern, iteration by Iterator design pattern, and states of systems by State design pattern were chosen. Cooperation with teachers and conduction of teacher training workshops complement observations within the classroom projects. The first classroom project resulted in a refinement of theory to foster competencies with respect to informatics systems (Chapter 7). In particular, perspectives on informatics systems were elaborated. Afterwards, a second classroom project was conducted and evaluated (Chapter 8). In conclusion of the research project, there is an empirically tested educational model to foster competencies with respect to informatics systems. T3 - Commentarii informaticae didacticae (CID) - 2 KW - Informatik KW - Informatikunterricht KW - Entwurfsmuster KW - Informatiksystem KW - Informatikdidaktik KW - Kompetenz KW - Lernsoftware Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-37959 SN - 978-3-86956-024-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Stede, Manfred T1 - From connectives to coherence relations BT - a case study of German contrastrive connectives JF - Revue roumaine de linguistique : RRL = Romanian review of linguistics N2 - The notion of coherence relations is quite widely accepted in general, but concrete proposals differ considerably on the questions of how they should be motivated, which relations are to be assumed, and how they should be defined. This paper takes a "bottom-up" perspective by assessing the contribution made by linguistic signals (connectives), using insights from the relevant literature as well as verification by practical text annotation. We work primarily with the German language here and focus on the realm of contrast. Thus, we suggest a new inventory of contrastive connective functions and discuss their relationship to contrastive coherence relations that have been proposed in earlier work. KW - coherence relation KW - connective KW - contrast KW - concession KW - corpus analysis Y1 - 2020 SN - 0035-3957 VL - 65 IS - 3 SP - 213 EP - 233 PB - Ed. Academiei Române CY - Bucureşti ER - TY - JOUR A1 - Steen, Alexander A1 - Wisniewski, Max A1 - Benzmüller, Christoph T1 - Einsatz von Theorembeweisern in der Lehre JF - Commentarii informaticae didacticae (CID) N2 - Dieser Beitrag diskutiert den Einsatz von interaktiven und automatischen Theorembeweisern in der universitären Lehre. Moderne Theorembeweiser scheinen geeignet zur Implementierung des dialogischen Lernens und als E-Assessment-Werkzeug in der Logikausbilding. Exemplarisch skizzieren wir ein innovaties Lehrprojekt zum Thema „Komputationale Metaphysik“, in dem die zuvor genannten Werkzeuge eingesetzt werden. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94853 SN - 978-3-86956-376-3 SN - 1868-0844 SN - 2191-1940 IS - 10 SP - 81 EP - 92 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Steinert, Bastian A1 - Cassou, Damien A1 - Hirschfeld, Robert T1 - CoExist overcoming aversion to change preserving immediate access to source code and run-time information of previous development states JF - ACM SIGPLAN notices N2 - Programmers make many changes to the program to eventually find a good solution for a given task. In this course of change, every intermediate development state can of value, when, for example, a promising ideas suddenly turn out inappropriate or the interplay of objects turns out more complex than initially expected before making changes. Programmers would benefit from tool support that provides immediate access to source code and run-time of previous development states of interest. We present IDE extensions, implemented for Squeak/Smalltalk, to preserve, retrieve, and work with this information. With such tool support, programmers can work without worries because they can rely on tools that help them with whatever their explorations will reveal. They no longer have to follow certain best practices only to avoid undesired consequences of changing code. KW - Design KW - Experimentation KW - Human Factors KW - Continuous Testing KW - Continuous Versioning KW - Debugging KW - Evolution KW - Explore-first Programming KW - Fault Localization KW - Prototyping Y1 - 2013 U6 - https://doi.org/10.1145/2480360.2384591 SN - 0362-1340 VL - 48 IS - 2 SP - 107 EP - 117 PB - Association for Computing Machinery CY - New York ER - TY - JOUR A1 - Steinert, Bastian A1 - Hirschfeld, Robert T1 - Applying design knowledge to programming Y1 - 2012 ER - TY - JOUR A1 - Steinert, Fritjof A1 - Stabernack, Benno T1 - Architecture of a low latency H.264/AVC video codec for robust ML based image classification how region of interests can minimize the impact of coding artifacts JF - Journal of Signal Processing Systems for Signal, Image, and Video Technology N2 - The use of neural networks is considered as the state of the art in the field of image classification. A large number of different networks are available for this purpose, which, appropriately trained, permit a high level of classification accuracy. Typically, these networks are applied to uncompressed image data, since a corresponding training was also carried out using image data of similar high quality. However, if image data contains image errors, the classification accuracy deteriorates drastically. This applies in particular to coding artifacts which occur due to image and video compression. Typical application scenarios for video compression are narrowband transmission channels for which video coding is required but a subsequent classification is to be carried out on the receiver side. In this paper we present a special H.264/Advanced Video Codec (AVC) based video codec that allows certain regions of a picture to be coded with near constant picture quality in order to allow a reliable classification using neural networks, whereas the remaining image will be coded using constant bit rate. We have combined this feature with the ability to run with lowest latency properties, which is usually also required in remote control applications scenarios. The codec has been implemented as a fully hardwired High Definition video capable hardware architecture which is suitable for Field Programmable Gate Arrays. KW - H.264 KW - Advanced Video Codec (AVC) KW - Low Latency KW - Region of Interest KW - Machine Learning KW - Inference KW - FPGA KW - Hardware accelerator Y1 - 2022 U6 - https://doi.org/10.1007/s11265-021-01727-2 SN - 1939-8018 SN - 1939-8115 VL - 94 IS - 7 SP - 693 EP - 708 PB - Springer CY - New York ER - TY - JOUR A1 - Steuer, Ralf A1 - Humburg, Peter A1 - Selbig, Joachim T1 - Validation and functional annotation of expression-based clusters based on gene ontology JF - BMC bioinformatics N2 - Background: The biological interpretation of large-scale gene expression data is one of the paramount challenges in current bioinformatics. In particular, placing the results in the context of other available functional genomics data, such as existing bio-ontologies, has already provided substantial improvement for detecting and categorizing genes of interest. One common approach is to look for functional annotations that are significantly enriched within a group or cluster of genes, as compared to a reference group. Results: In this work, we suggest the information-theoretic concept of mutual information to investigate the relationship between groups of genes, as given by data-driven clustering, and their respective functional categories. Drawing upon related approaches (Gibbons and Roth, Genome Research 12: 1574-1581, 2002), we seek to quantify to what extent individual attributes are sufficient to characterize a given group or cluster of genes. Conclusion: We show that the mutual information provides a systematic framework to assess the relationship between groups or clusters of genes and their functional annotations in a quantitative way. Within this framework, the mutual information allows us to address and incorporate several important issues, such as the interdependence of functional annotations and combinatorial combinations of attributes. It thus supplements and extends the conventional search for overrepresented attributes within a group or cluster of genes. In particular taking combinations of attributes into account, the mutual information opens the way to uncover specific functional descriptions of a group of genes or clustering result. All datasets and functional annotations used in this study are publicly available. All scripts used in the analysis are provided as additional files. Y1 - 2006 U6 - https://doi.org/10.1186/1471-2105-7-380 SN - 1471-2105 VL - 7 IS - 380 PB - BioMed Central CY - London ER - TY - JOUR A1 - Stoffel, Dominik A1 - Kunz, Wolfgang T1 - Record & play : a structural fixed point iteration for sequential circuit verification Y1 - 1997 SN - 0-8186-8200-0 ER - TY - BOOK A1 - Stoffel, Dominik A1 - Kunz, Wolfgang T1 - Structural FSM traversal : theory and a practical algorithm T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1997 SN - 0946-7580 VL - 1997, 05 PB - Univ. Potsdam CY - Potsdam ER - TY - JOUR A1 - Stoffel, Dominik A1 - Kunz, Wolfgang T1 - Logic equivalence checking by optimization techniues Y1 - 1996 ER - TY - JOUR A1 - Stoffel, Dominik A1 - Kunz, Wolfgang A1 - Gerber, Stefan T1 - And/Or reasoning graphs for determining prime implicants in multi-level combinational networks Y1 - 1997 ER - TY - GEN A1 - Strickroth, Sven T1 - PLATON BT - Developing a Graphical Lesson Planning System for Prospective Teachers T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Lesson planning is both an important and demanding task—especially as part of teacher training. This paper presents the requirements for a lesson planning system and evaluates existing systems regarding these requirements. One major drawback of existing software tools is that most are limited to a text- or form-based representation of the lesson designs. In this article, a new approach with a graphical, time-based representation with (automatic) analyses methods is proposed and the system architecture and domain model are described in detail. The approach is implemented in an interactive, web-based prototype called PLATON, which additionally supports the management of lessons in units as well as the modelling of teacher and student-generated resources. The prototype was evaluated in a study with 61 prospective teachers (bachelor’s and master’s preservice teachers as well as teacher trainees in post-university teacher training) in Berlin, Germany, with a focus on usability. The results show that this approach proofed usable for lesson planning and offers positive effects for the perception of time and self-reflection. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 804 KW - lesson planning KW - lesson preparation KW - support system KW - automatic feedback Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-441887 SN - 1866-8372 IS - 804 ER - TY - JOUR A1 - Strickroth, Sven T1 - PLATON BT - Developing a Graphical Lesson Planning System for Prospective Teachers JF - Education Sciences N2 - Lesson planning is both an important and demanding task—especially as part of teacher training. This paper presents the requirements for a lesson planning system and evaluates existing systems regarding these requirements. One major drawback of existing software tools is that most are limited to a text- or form-based representation of the lesson designs. In this article, a new approach with a graphical, time-based representation with (automatic) analyses methods is proposed and the system architecture and domain model are described in detail. The approach is implemented in an interactive, web-based prototype called PLATON, which additionally supports the management of lessons in units as well as the modelling of teacher and student-generated resources. The prototype was evaluated in a study with 61 prospective teachers (bachelor’s and master’s preservice teachers as well as teacher trainees in post-university teacher training) in Berlin, Germany, with a focus on usability. The results show that this approach proofed usable for lesson planning and offers positive effects for the perception of time and self-reflection. KW - lesson planning KW - lesson preparation KW - support system KW - automatic feedback Y1 - 2019 U6 - https://doi.org/10.3390/educsci9040254 SN - 2227-7102 VL - 9 IS - 4 PB - MDPI CY - Basel ER - TY - JOUR A1 - Strickroth, Sven A1 - Kiy, Alexander T1 - E-Assessment etablieren BT - Auf dem Weg zu (dezentralen) E-Klausuren JF - Potsdamer Beiträge zur Hochschulforschung N2 - Elektronische Lernstandserhebungen, sogenannte E-Assessments, bieten für Lehrende und Studierende viele Vorteile z. B. hinsichtlich schneller Rückmeldungen oder kompetenzorientierter Fragenformate, und ermöglichen es, unabhängig von Ort und Zeit Prüfungen zu absolvieren. In diesem Beitrag werden die Einführung von summativen Lernstandserhebungen, sogenannter E-Klausuren, am Beispiel der Universität Potsdam, der Aufbau einer länderübergreifenden Initiative für E-Assessment sowie technische Möglichkeiten für dezentrale elektronische Klausuren vorgestellt. Dabei werden der aktuelle Stand, die Ziele und die gewählte stufenweise Umsetzungsstrategie der Universität Potsdam skizziert. Darauf aufbauend folgt eine Beschreibung des Vorgehens, der Kooperationsmöglichkeiten für den Wissens- und Erfahrungsaustausch sowie Herausforderungen der E-Assessment- Initiative. Abschließend werden verschiedene E-Klausurformen und technische Möglichkeiten zur Umsetzung komplexer Prüfungsumgebungen klassifiziert sowie mit ihren charakteristischen Vor- und Nachteilen diskutiert und eine integrierte Lösung vorgeschlagen. KW - E-Assessment KW - Elektronisches Prüfen KW - E-Klausuren KW - Digitalisierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-493036 SN - 978-3-86956-498-2 SN - 2192-1075 SN - 2192-1083 IS - 6 SP - 257 EP - 272 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Stumpf, Sarah T1 - Digitale Kompetenzen im Lehramtsstudium BT - Entwicklung eines Frameworks für angehende Lehrkräfte JF - E-Learning Symposium 2018 N2 - Der Beitrag skizziert ein Modell, das die Entwicklung digitaler Kompetenzen im Lehramtsstudium fördern soll. Zwar wird das Kompetenzmodell aus der Deutschdidaktik heraus entwickelt, nimmt aber auch fachübergreifende Anforderungen in den Bereichen Informationskompetenz, medientechnischer Kompetenzen, Fähigkeiten der Medienanalyse und -reflexion sowie Sprachhandlungskompetenz in den Blick. Damit wird das Ziel verfolgt, die besonderen Anforderungen angehender Lehrkräfte als Mediator*innen digitaler Kompetenzen darzustellen. Das beschriebene Modell dieser Vermittlungskompetenz dient der Verankerung digitaler Lehr-Lernkonzepte als wesentlicher Bestandteil der modernen Lehrer*innenbildung. KW - Lehrer*innenbildung KW - Kompetenzerwerb KW - digitale Bildung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421968 SP - 69 EP - 71 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - GEN A1 - Stöpel, Christoph A1 - Schubert, Wolfgang A1 - Margaria-Steffen, Tiziana T1 - Plug-ins und Dienste : Ansätze zu Bewältigung zeitvarianter Geschäftsprozesse T2 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 2007 SN - 0946-7580 VL - 2007, 2 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Sugiyama, Masashi A1 - Kawanabe, Motoaki A1 - Müller, Klaus-Robert T1 - Trading variance reduction with unbiasedness : the regularized subspace information criterion for robust model selection in kernel regression N2 - A well-known result by Stein (1956) shows that in particular situations, biased estimators can yield better parameter estimates than their generally preferred unbiased counterparts. This letter follows the same spirit, as we will stabilize the unbiased generalization error estimates by regularization and finally obtain more robust model selection criteria for learning. We trade a small bias against a larger variance reduction, which has the beneficial effect of being more precise on a single training set. We focus on the subspace information criterion (SIC), which is an unbiased estimator of the expected generalization error measured by the reproducing kernel Hilbert space norm. SIC can be applied to the kernel regression, and it was shown in earlier experiments that a small regularization of SIC has a stabilization effect. However, it remained open how to appropriately determine the degree of regularization in SIC. In this article, we derive an unbiased estimator of the expected squared error, between SIC and the expected generalization error and propose determining the degree of regularization of SIC such that the estimator of the expected squared error is minimized. Computer simulations with artificial and real data sets illustrate that the proposed method works effectively for improving the precision of SIC, especially in the high-noise-level cases. We furthermore compare the proposed method to the original SIC, the cross-validation, and an empirical Bayesian method in ridge parameter selection, with good results Y1 - 2004 SN - 0899-7667 ER - TY - JOUR A1 - Sysło, Maciej M. A1 - Kwiatkowska, Anna Beata T1 - Think logarithmically! JF - KEYCIT 2014 - Key Competencies in Informatics and ICT N2 - We discuss here a number of algorithmic topics which we use in our teaching and in learning of mathematics and informatics to illustrate and document the power of logarithm in designing very efficient algorithms and computations – logarithmic thinking is one of the most important key competencies for solving real world practical problems. We demonstrate also how to introduce logarithm independently of mathematical formalism using a conceptual model for reducing a problem size by at least half. It is quite surprising that the idea, which leads to logarithm, is present in Euclid’s algorithm described almost 2000 years before John Napier invented logarithm. KW - Logarithm KW - binary search KW - binary representation KW - exponentiation KW - Euclid’s algorithm KW - Fibonacci numbers KW - divide and conquer KW - complexity Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82923 SN - 1868-0844 SN - 2191-1940 IS - 7 SP - 371 EP - 380 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Tarkhanov, Nikolai Nikolaevich T1 - Harmonic integrals on domains with edges T3 - Preprint / Universität Potsdam, Institut für Mathematik, Arbeitsgruppe Partiell Y1 - 2004 SN - 1437-739X PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Tarnick, Steffen T1 - Controllable self-checking checkers for conditional concurrent checking Y1 - 1995 ER - TY - THES A1 - Tarnick, Steffen T1 - Data compression techniques for concurrent error detection and built-in self test Y1 - 1995 ER - TY - JOUR A1 - Tarnick, Steffen T1 - Bounding error masking in linear output space compression schemes Y1 - 1994 ER - TY - JOUR A1 - Tarnick, Steffen T1 - Controllable self-checking checkers for conditional concurrent checking Y1 - 1994 ER - TY - CHAP A1 - Tavangarian, Djamshid A1 - Schroeder, Ulrik A1 - Igel, Christoph A1 - Magenheim, Johannes A1 - Kundisch, Dennis A1 - Beutner, Marc A1 - Herrmann, Philipp A1 - Whittaker, Michael A1 - Reinhardt, Wolfgang A1 - Zoyke, Andrea A1 - Elbeshausen, Stefanie A1 - Griesbaum, Joachim A1 - Koelle, Ralph A1 - Kneiphoff, Anika Hanna A1 - Mauch, Martina A1 - Hübner, Sandra A1 - Walter, Satjawan A1 - Dittler, Ullrich A1 - Baumann, Annette A1 - Reeh, Lucas A1 - Beuster, Liane A1 - Elkina, Margarita A1 - Fortenbacher, Albrecht A1 - Kappe, Leonard A1 - Merceron, Agathe A1 - Pursian, Andreas A1 - Schwarzrock, Sebastian A1 - Wenzlaff, Boris A1 - Hilse, Michael A1 - Lucke, Ulrike ED - Lucke, Ulrike T1 - E-Learning Symposium 2012 BT - Aktuelle Anwendungen, innovative Prozesse und neueste Ergebnisse aus der E-Learning-Praxis ; Potsdam, 17. November 2012 N2 - Dieser Tagungsband beinhaltet die auf dem E-Learning Symposium 2012 an der Universität Potsdam vorgestellten Beiträge zu aktuellen Anwendungen, innovativen Prozesse und neuesten Ergebnissen im Themenbereich E-Learning. Lehrende, E-Learning-Praktiker und -Entscheider tauschten ihr Wissen über etablierte und geplante Konzepte im Zusammenhang mit dem Student-Life-Cycle aus. Der Schwerpunkt lag hierbei auf der unmittelbaren Unterstützung von Lehr- und Lernprozessen, auf Präsentation, Aktivierung und Kooperation durch Verwendung von neuen und etablierten Technologien. KW - E-Learning KW - Learning Analytics KW - lebenslanges Lernen KW - E-Learning KW - Learning Analytics KW - Life-Long Learning Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62661 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Tepoyan, Liparit T1 - The Mixed problem for a degenerate operator equation T3 - Preprint / Universität Potsdam, Institut für Mathematik, Arbeitsgruppe Partiell Y1 - 2008 SN - 1437-739X PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Tepoyan, Liparit T1 - The Neumann problem for a degenerate operator equation T3 - Preprint / Universität Potsdam, Institut für Mathematik, Arbeitsgruppe Partiell Y1 - 2004 SN - 1437-739X PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Tepoyan, Liparit T1 - Degenerated operator equations og higher order T3 - Preprint / Universität Potsdam, Institut für Mathematik, Arbeitsgruppe Partiell Y1 - 2000 SN - 1437-739X PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Teske, Daniel T1 - Geocoder accuracy ranking JF - Process design for natural scientists: an agile model-driven approach N2 - Finding an address on a map is sometimes tricky: the chosen map application may be unfamiliar with the enclosed region. There are several geocoders on the market, they have different databases and algorithms to compute the query. Consequently, the geocoding results differ in their quality. Fortunately the geocoders provide a rich set of metadata. The workflow described in this paper compares this metadata with the aim to find out which geocoder is offering the best-fitting coordinate for a given address. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 161 EP - 174 PB - Springer CY - Berlin ER -