TY - JOUR A1 - Brüning, Stefan A1 - Schaub, Torsten H. T1 - Avoiding non-ground variables Y1 - 1999 SN - 3-540-66131-x ER - TY - JOUR A1 - Benhammadi, Farid A1 - Nicolas, Pascal A1 - Schaub, Torsten H. T1 - Query-answering in prioritized default logic Y1 - 1999 SN - 3-540-66131-X ER - TY - BOOK A1 - Schaub, Torsten H. T1 - The automation of reasoning with incomplete information : from semantic foundations to efficient computation T3 - Lecture notes in computer science Y1 - 1999 SN - 3-540-64515-2 U6 - https://doi.org/10.1007/BFb0054963 VL - 1409 PB - Springer CY - Berlin ER - TY - BOOK A1 - Jürgensen, Helmut A1 - Staiger, Ludwig T1 - Finite automata : encoding geometric figures T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 07 PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Pupka, Reiner A1 - Bartl, Peter A1 - Keller, Vera A1 - Kupries, Mario A1 - Reichel, Ingrid A1 - Schmidt, Maren A1 - Tiede, Gabriele T1 - Abschlußbericht zum Verbundprojekt "Rechnergestützte Modellierung und Steuerung der Vorgangsbearbeitung in verteilten Verwaltungs- und Organisationssystemen" T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 01 PB - Univ. CY - Potsdam ER - TY - BOOK ED - Schwill, Andreas T1 - Informatik und Schule : fachspezifische und fachübergreifende didaktische Konzepte Y1 - 1999 SN - 3-540-66300-2 U6 - https://doi.org/10.1007/978-3-642-60238-2 PB - Springer CY - Berlin, Heidelberg ER - TY - BOOK A1 - Jürgensen, Helmut A1 - Kari, L. A1 - Thierrin, G. T1 - Morphisms preserving densities T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 09 PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Jürgensen, Helmut A1 - Katsura, M. A1 - Konstantinidis, Stavros T1 - Maximal solid codes T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 03 PB - Univ. CY - Potsdam ER - TY - THES A1 - Petrasch, Roland T1 - Entwicklung von Modelltypen für das Qualitätsmanagement in der Software-Entwicklung am Beispiel von ausgewählten Qualitätssicherungsmaßnahmen Y1 - 1999 ER - TY - BOOK A1 - Brzozowski, J. A. A1 - Jürgensen, Helmut T1 - Semilattices of fault semiautomata T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 02 PB - Univ. CY - Potsdam ER - TY - THES A1 - Moschanin, Wladimir T1 - Entwurf selbstdualer digitaler Schaltungen zur Fehlererkennung Y1 - 1999 CY - Potsdam ER - TY - JOUR A1 - Benhammadi, Farid A1 - Nicolas, Pascal A1 - Schaub, Torsten H. T1 - Query-answering in prioritized default logic Y1 - 1999 SN - 3-540-66131-X ER - TY - BOOK A1 - Zendler, Andreas T1 - Multiple einzelfallanalytische Versuchspläne der Biometrie zur Durchführung softwaretechnischer Experimente T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 11 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Brüning, Stefan A1 - Schaub, Torsten H. T1 - A voiding non-ground variables Y1 - 1999 ER - TY - JOUR A1 - Linke, Thomas A1 - Schaub, Torsten H. T1 - On bottom-up pre-processing techniques for automated default reasoning Y1 - 1999 SN - 3-540-66131-x ER - TY - JOUR A1 - Seuring, Markus T1 - Built-in self test mit multi-mode scannable memory elementen Y1 - 1999 ER - TY - JOUR A1 - Neumann, I. A1 - Stoffel, Dominik A1 - Hartje, Hendrik A1 - Kunz, Wolfgang T1 - Cell replication and redundancy elimination during placement for cycle time optimization Y1 - 1999 ER - TY - JOUR A1 - Kupries, Mario T1 - Connector-aided coordination in agent systems Y1 - 1999 ER - TY - BOOK A1 - Schubert, Wolfgang A1 - Koutzevlov, Atanas A1 - Horn, Erika A1 - Rätsch, Gunnar A1 - Tschapek, Alexej T1 - Aspekte der Flexibilisierung von Systemen für den Hardwaretest T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 04 PB - Univ. CY - Potsdam ER - TY - BOOK ED - Boldt, Oliver ED - Jürgensen, Helmut ED - Robbins, L. E. T1 - Workshop on Implementing Automata : WIA99 - pre-proceedings ; Potsdam, Germany, 17 - 19. July 1999 T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 1999 SN - 0946-7580 VL - 1999, 4 PB - Univ. CY - Potsdam ER - TY - JOUR A1 - Tscherejkina, Anna A1 - Morgiel, Anna A1 - Moebert, Tobias T1 - Computergestütztes Training von sozio-emotionalen Kompetenzen durch Minispiele JF - E-Learning Symposium 2018 N2 - Das Training sozioemotionaler Kompetenzen ist gerade für Menschen mit Autismus nützlich. Ein solches Training kann mithilfe einer spielbasierten Anwendung effektiv gestaltet werden. Zwei Minispiele, Mimikry und Emo-Mahjong, wurden realisiert und hinsichtlich User Experience evaluiert. Die jeweiligen Konzepte und die Evaluationsergebnisse sollen hier vorgestellt werden. KW - Computergestützes Training KW - User Experience KW - Digital Game Based Learning KW - Autismus Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421937 SP - 41 EP - 52 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Tiwari, Abhishek T1 - Enhancing Users’ Privacy: Static Resolution of the Dynamic Properties of Android N2 - The usage of mobile devices is rapidly growing with Android being the most prevalent mobile operating system. Thanks to the vast variety of mobile applications, users are preferring smartphones over desktops for day to day tasks like Internet surfing. Consequently, smartphones store a plenitude of sensitive data. This data together with the high values of smartphones make them an attractive target for device/data theft (thieves/malicious applications). Unfortunately, state-of-the-art anti-theft solutions do not work if they do not have an active network connection, e.g., if the SIM card was removed from the device. In the majority of these cases, device owners permanently lose their smartphone together with their personal data, which is even worse. Apart from that malevolent applications perform malicious activities to steal sensitive information from smartphones. Recent research considered static program analysis to detect dangerous data leaks. These analyses work well for data leaks due to inter-component communication, but suffer from shortcomings for inter-app communication with respect to precision, soundness, and scalability. This thesis focuses on enhancing users' privacy on Android against physical device loss/theft and (un)intentional data leaks. It presents three novel frameworks: (1) ThiefTrap, an anti-theft framework for Android, (2) IIFA, a modular inter-app intent information flow analysis of Android applications, and (3) PIAnalyzer, a precise approach for PendingIntent vulnerability analysis. ThiefTrap is based on a novel concept of an anti-theft honeypot account that protects the owner's data while preventing a thief from resetting the device. We implemented the proposed scheme and evaluated it through an empirical user study with 35 participants. In this study, the owner's data could be protected, recovered, and anti-theft functionality could be performed unnoticed from the thief in all cases. IIFA proposes a novel approach for Android's inter-component/inter-app communication (ICC/IAC) analysis. Our main contribution is the first fully automatic, sound, and precise ICC/IAC information flow analysis that is scalable for realistic apps due to modularity, avoiding combinatorial explosion: Our approach determines communicating apps using short summaries rather than inlining intent calls between components and apps, which requires simultaneously analyzing all apps installed on a device. We evaluate IIFA in terms of precision, recall, and demonstrate its scalability to a large corpus of real-world apps. IIFA reports 62 problematic ICC-/IAC-related information flows via two or more apps/components. PIAnalyzer proposes a novel approach to analyze PendingIntent related vulnerabilities. PendingIntents are a powerful and universal feature of Android for inter-component communication. We empirically evaluate PIAnalyzer on a set of 1000 randomly selected applications and find 1358 insecure usages of PendingIntents, including 70 severe vulnerabilities. N2 - Die Nutzung von mobilen Geräten nimmt rasant zu, wobei Android das häufigste mobile Betriebssystem ist. Dank der Vielzahl an mobilen Anwendungen bevorzugen Benutzer Smartphones gegenüber Desktops für alltägliche Aufgaben wie das Surfen im Internet. Folglich speichern Smartphones eine Vielzahl sensibler Daten. Diese Daten zusammen mit den hohen Werten von Smartphones machen sie zu einem attraktiven Ziel für Geräte/Datendiebstahl (Diebe/bösartige Anwendungen). Leider funktionieren moderne Diebstahlsicherungslösungen nicht, wenn sie keine aktive Netzwerkverbindung haben, z. B. wenn die SIM-Karte aus dem Gerät entnommen wurde. In den meisten Fällen verlieren Gerätebesitzer ihr Smartphone dauerhaft zusammen mit ihren persönlichen Daten, was noch schlimmer ist. Abgesehen davon gibt es bösartige Anwendungen, die schädliche Aktivitäten ausführen, um vertrauliche Informationen von Smartphones zu stehlen. Kürzlich durchgeführte Untersuchungen berücksichtigten die statische Programmanalyse zur Erkennung gefährlicher Datenlecks. Diese Analysen eignen sich gut für Datenlecks aufgrund der Kommunikation zwischen Komponenten, weisen jedoch hinsichtlich der Präzision, Zuverlässigkeit und Skalierbarkeit Nachteile für die Kommunikation zwischen Apps auf. Diese Dissertation konzentriert sich auf die Verbesserung der Privatsphäre der Benutzer auf Android gegen Verlust/Diebstahl von physischen Geräten und (un)vorsätzlichen Datenverlust. Es werden drei neuartige Frameworks vorgestellt: (1) ThiefTrap, ein Anti-Diebstahl-Framework für Android, (2) IIFA, eine modulare Inter-App Analyse des Informationsflusses von Android Anwendungen, und (3) PIAnalyzer, ein präziser Ansatz für PendingIntent Schwachstellenanalyse. ThiefTrap basiert auf einem neuartigen Konzept eines Diebstahlschutzkontos, das die Daten des Besitzers schützt und verhindert, dass ein Dieb das Gerät zurücksetzt. Wir haben das vorgeschlagene Schema implementiert und durch eine empirische Anwenderstudie mit 35 Teilnehmern ausgewertet. In dieser Studie könnten die Daten des Besitzers geschützt und wiederhergestellt werden, und die Diebstahlsicherungsfunktion konnte in jedem Fall unbemerkt vom Dieb ausgeführt werden. IIFA schlägt einen neuen Ansatz für die Analyse von Komponenten zwischen Komponenten/ Inter-App Kommunikation (ICC/IAC) von Android vor. Unser Hauptbeitrag ist die erste vollautomatische, solide und präzise ICC/IAC Informationsflussanalyse, die aufgrund ihrer Modularität für realistische Apps skalierbar ist und eine kombinatorische Explosion vermeidet: Unser Ansatz bestimmt, dass Apps über kurze Zusammenfassungen kommuniziert werden, anstatt Absichtsaufrufe zwischen Komponenten zu verwenden und Apps, bei denen gleichzeitig alle auf einem Gerät installierten Apps analysiert werden müssen. Wir bewerten IIFA in Bezug auf Präzision, Rückruf und demonstrieren seine Skalierbarkeit für einen großen Korpus realer Apps. IIFA meldet 62 problematische ICC- / IAC-bezogene Informationsflüsse über zwei oder mehr Apps / Komponenten. PIAnalyzer schlägt einen neuen Ansatz vor, um Schwachstellen im Zusammenhang mit PendingIntent zu analysieren. PendingIntents nutzen eine leistungsstarke und universelle Funktion von Android für die Kommunikation zwischen Komponenten. Wir evaluieren PIAnalyzer empirisch an einem Satz von 1000 zufällig ausgewählten Anwendungen und finden 1358 unsichere Verwendungen von PendingIntents, einschließlich 70 schwerwiegender Schwachstellen. KW - Android Security KW - Static Analysis KW - Privacy Protection Y1 - 2019 ER - TY - BOOK A1 - Stechert, Peer T1 - Fachdidaktische Diskussion von Informatiksystemen und der Kompetenzentwicklung im Informatikunterricht N2 - In der vorliegenden Arbeit wird ein Unterrichtsmodell zur Kompetenzentwicklung mit Informatiksystemen für die Sekundarstufe II vorgestellt. Der Bedarf wird u. a. damit begründet, dass Informatiksysteme zu Beginn des 21. Jahrhunderts allgegenwärtig sind (Kapitel 1). Für Kompetenzentwicklung mit Informatiksystemen sind diese in ihrer Einheit aus Hardware, Software und Vernetzung anhand ihres nach außen sichtbaren Verhaltens, der inneren Struktur und Implementierungsaspekten zu analysieren. Ausgehend vom Kompetenzbegriff (Kapitel 2) und dem Informatiksystembegriff (Kapitel 3) erfolgt eine Analyse des fachdidaktischen Forschungsstandes zur Kompetenzentwicklung mit Informatiksystemen. Die Ergebnisse lassen sich in die Bereiche (1) Bildungsziele, (2) Unterrichtsinhalte, (3) Lehr-Lernmethodik und (4) Lehr-Lernmedien aufteilen (Kapitel 4). In Kapitel 5 wird die Unterrichtsmodellentwicklung beschrieben. Den Zugang zu Informatiksystemen bildet in der vorliegenden Dissertationsschrift das nach außen sichtbare Verhalten. Es erfolgt eine Fokussierung auf vernetzte fundamentale Ideen der Informatik und Strukturmodelle von Informatiksystemen als Unterrichtsinhalte. Es wird begründet, dass ausgewählte objektorientierte Entwurfsmuster vernetzte fundamentale Ideen repräsentieren. In Abschnitt 5.4 werden dementsprechend Entwurfsmuster als Wissensrepräsentation für vernetzte fundamentale Ideen klassifiziert. Das systematische Erkunden des Verhaltens von Informatiksystemen wird im Informatikunterricht bisher kaum thematisiert. Es werden Schülertätigkeiten in Anlehnung an Unterrichtsexperimente angegeben, die Schüler unterstützen, Informatiksysteme bewusst und gezielt anzuwenden (Abschnitt 5.5). Bei dieser Lehr-Lernmethodik werden das nach außen sichtbare Verhalten von Informatiksystemen, im Sinne einer Black-Box, und das Wechselspiel von Verhalten und Struktur bei vorliegender Implementierung des Systems als White-Box analysiert. Die Adressierung schrittweise höherer kognitiver Niveaustufen wird in die Entwicklung einbezogen. Unterstützend wird für das Unterrichtsmodell lernförderliche Software gestaltet, die vernetzte fundamentale Ideen in Entwurfsmustern und das Experimentieren aufgreift (Abschnitt 5.6). Schwerpunkte bilden im Unterrichtsmodell zwei Arten von lernförderlicher Software: (1) Die Lernsoftware Pattern Park wurde von einer studentischen Projektgruppe entwickelt. In ihr können in Entwurfsmustern enthaltene fundamentale Ideen der Informatik über ihren Lebensweltbezug im Szenario eines Freizeitparks analysiert werden. (2) Als weitere Art Lernsoftware werden kleine Programme eingesetzt, deren innere Struktur durch ausgewählte Entwurfsmuster gebildet und deren Verhalten direkt durch die darin enthaltenen fundamentalen Ideen bestimmt wird. Diese Programme können durch die Experimente im Unterricht systematisch untersucht werden. Mit dem Ziel, die normative Perspektive um Rückkopplung mit der Praxis zu ergänzen, werden zwei Erprobungen im Informatikunterricht vorgenommen. Diese liefern Erkenntnisse zur Machbarkeit des Unterrichtsmodells und dessen Akzeptanz durch die Schüler (Kapitel 6 und 8). Exemplarisch umgesetzt werden die Themen Zugriffskontrolle mit dem Proxymuster, Iteration mit dem Iteratormuster und Systemzustände mit dem Zustandsmuster. Der intensive Austausch mit Informatiklehrpersonen in der Kooperationsschule über Informatiksysteme und Kompetenzentwicklung sowie die Durchführung von zwei Lehrerfortbildungen ergänzen die Beobachtungen im unterrichtlichen Geschehen. Die erste Unterrichtserprobung resultiert in einer Weiterentwicklung des Unterrichtsmodells zu Informatiksystemen und Kompetenzentwicklung (Kapitel 7). Darin erfolgt eine Fokussierung auf das nach außen sichtbare Verhalten von Informatiksystemen und eine Verfeinerung der Perspektiven auf innere Struktur und ausgewählte Implementierungsaspekte. Anschließend wird die zweite Unterrichtserprobung durchgeführt und evaluiert (Kapitel 8). Am Schluss der Forschungsarbeit steht ein in empirischen Phasen erprobtes Unterrichtsmodell. N2 - In the 21st century, informatics systems are ubiquitous. Therefore, the author presents an educational model for competencies with respect to informatics systems (Chapter 1). To achieve such competencies at upper secondary level, observable behaviour, internal structure and implementation aspects of informatics systems have to be analysed by students. Based on a definition of the terms competency (Chapter 2) and informatics system (Chapter 3), the state of the art in Didactics of Informatics is investigated. In the national and international scientific work, (1) educational objectives, (2) themes and subject matters, (3) teaching and learning methods, as well as (4) educational means and media are identified (Chapter 4). In Chapter 5 the development of the educational model is described. The approach to competencies with respect to informatics systems concentrates on the observable behaviour of the systems. We focus on networked fundamental ideas of informatics as a quality factor and structural models of informatics systems. Selected object-oriented design patterns represent networked fundamental ideas. In Section 5.4 design patterns as knowledge representations of fundamental ideas are classified. Systematic exploration of informatics systems is uncommon in informatics education at upper secondary level. Therefore, students' activities are developed according to educational experiments to enable students to use systems consciously (Section 5.5). Systematic exploration puts students in a position to analyse the observable behaviour as a black box. Given the source code and documentation of a system, experimenting with such a system relates behaviour to its internal structure. Succeeding cognitive processes are also considered in this approach. To support learning, software was developed, which emphasises fundamental ideas in design patterns and enables experimenting (Section 5.6). There are two kinds of learning software: (1) The learning software Pattern Park was developed by a student project group. In the software fundamental ideas within design patterns can be understood through a real-life analogy in the context of a theme park. (2) As a second kind of learning software we use small programs, whose internal structure is built by selected design patterns. Their observable behaviour depends on networked fundamental ideas of informatics. These programs can be analysed systematically by students. Aiming at complementing the normative perspective with concrete learning processes, two classroom practice projects were conducted. These offered results with respect to feasibility of the educational model and acceptance by the students (Chapter 6 and 8). Exemplarily, access control by Proxy design pattern, iteration by Iterator design pattern, and states of systems by State design pattern were chosen. Cooperation with teachers and conduction of teacher training workshops complement observations within the classroom projects. The first classroom project resulted in a refinement of theory to foster competencies with respect to informatics systems (Chapter 7). In particular, perspectives on informatics systems were elaborated. Afterwards, a second classroom project was conducted and evaluated (Chapter 8). In conclusion of the research project, there is an empirically tested educational model to foster competencies with respect to informatics systems. T3 - Commentarii informaticae didacticae (CID) - 2 KW - Informatik KW - Informatikunterricht KW - Entwurfsmuster KW - Informatiksystem KW - Informatikdidaktik KW - Kompetenz KW - Lernsoftware Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-37959 SN - 978-3-86956-024-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - CHAP A1 - Keil, Reinhard A1 - Koubek, Jochen A1 - Martens, Alke A1 - Schulte, Carsten A1 - Bieniusa, Annette A1 - Degen, Markus A1 - Heidegger, Phillip A1 - Thiemann, Peter A1 - Gasbichler, Martin A1 - Crestani, Marcus A1 - Klaeren, Herbert A1 - Knauel, Eric A1 - Sperber, Michael A1 - Eirund, Helmut A1 - Sethmann, Richard A1 - Weicker, Nicole A1 - Weicker, Karsten A1 - Reinhardt, Wolfgang A1 - Magenheim, Johannes A1 - Bender, Katrin A1 - Steinert, Markus A1 - Schwidrowski, Kirstin A1 - Schmidt, Thilo A1 - Brück, Rainer A1 - Freischlad, Stefan A1 - Schubert, Sigrid A1 - Stechert, Peer A1 - Kujath, Bertold ED - Schwill, Andreas T1 - Hochschuldidaktik der Informatik : HDI2008 – 3. Workshop des GI-Fachbereichs Ausbildung und Beruf/Didaktik der Informatik ; 04. - 05. Dezember 2008 an der Universität Potsdam N2 - Thema des Workshops waren alle Fragen, die sich der Vermittlung von Informatikgegenständen im Hochschulbereich widmen. Dazu gehören u.a.: - fachdidaktische Konzepte der Vermittlung einzelner Informatikgegenstände - methodische Lösungen, wie spezielle Lehr- und Lernformen, Durchführungskonzepte - Studienkonzepte und Curricula, insbesondere im Zusammenhang mit Bachelor- und Masterstudiengängen - E-Learning-Ansätze, wenn sie ein erkennbares didaktisches Konzept verfolgen empirische Ergebnisse und Vergleichsstudien. Die Fachtagung widmete sich ausgewählten Fragestellungen dieses Themenkomplexes, die durch Vorträge ausgewiesener Experten, durch eingereichte Beiträge und durch eine Präsentation intensiv behandelt wurden. T3 - Commentarii informaticae didacticae (CID) - 1 KW - Informatik KW - Ausbildung KW - Didaktik KW - Hochschuldidaktik KW - informatics KW - education KW - didactics KW - higher education Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-28080 SN - 978-3-940793-75-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Decker, Gero T1 - Design and analysis of process choreographies T1 - Design und Analyse von Prozesschoreographien N2 - With the rise of electronic integration between organizations, the need for a precise specification of interaction behavior increases. Information systems, replacing interaction previously carried out by humans via phone, faxes and emails, require a precise specification for handling all possible situations. Such interaction behavior is described in process choreographies. Choreographies enumerate the roles involved, the allowed interactions, the message contents and the behavioral dependencies between interactions. Choreographies serve as interaction contract and are the starting point for adapting existing business processes and systems or for implementing new software components. As a thorough analysis and comparison of choreography modeling languages is missing in the literature, this thesis introduces a requirements framework for choreography languages and uses it for comparing current choreography languages. Language proposals for overcoming the limitations are given for choreography modeling on the conceptual and on the technical level. Using an interconnection modeling style, behavioral dependencies are defined on a per-role basis and different roles are interconnected using message flow. This thesis reveals a number of modeling "anti-patterns" for interconnection modeling, motivating further investigations on choreography languages following the interaction modeling style. Here, interactions are seen as atomic building blocks and the behavioral dependencies between them are defined globally. Two novel language proposals are put forward for this modeling style which have already influenced industrial standardization initiatives. While avoiding many of the pitfalls of interconnection modeling, new anomalies can arise in interaction models. A choreography might not be realizable, i.e. there does not exist a set of interacting roles that collectively realize the specified behavior. This thesis investigates different dimensions of realizability. N2 - Elektronische Integration zwischen Organisationen erfordert eine präzise Spezifikation des Interaktionsverhaltens: Informationssysteme, die Kommunikation per Telefon, Fax und Email ablösen, können nicht so flexibel und selbständig auf Ausnahmesituationen reagieren wie Menschen. Choreographien ermöglichen es, Interaktionsverhalten genau zu spezifizieren. Diese Modelle zählen die beteiligten Rollen, die erlaubten Interaktionen, Nachrichteninhalte und Verhaltensabhängigkeiten auf und dienen somit als Interaktionsvertrag zwischen den Organisationen. Auch als Ausgangspunkt für eine Anpassung existierender Prozesse und Systeme sowie für die Implementierung neuer Softwarekomponenten finden Choreographien Anwendung. Da ein Vergleich von Choreographiemodellierungssprachen in der Literatur bislang fehlt, präsentiert diese Arbeit einen Anforderungskatalog, der als Basis für eine Evaluierung existierender Sprachen angewandt wird. Im Kern führt diese Arbeit Spracherweiterungen ein, um die Schwächen existierender Sprachen zu überwinden. Die vorgestellten Erweiterungen adressieren dabei Modellierung auf konzeptioneller und auf technischer Ebene. Beim Verlinkungsmodellierungsstil werden Verhaltensabhängigkeiten innerhalb der beteiligten Rollen spezifiziert und das Interaktionsverhalten entsteht durch eine Verlinkung der Kommunikationsaktivitäten. Diese Arbeit stellt einige "Anti-Pattern" für die Verlinkungsmodellierung vor, welche wiederum Untersuchungen bzgl. Choreographiesprachen des Interaktionsmodellierungsstils motivieren. Hier werden Interaktionen als atomare Blöcke verstanden und Verhaltensabhängigkeiten werden global definiert. Diese Arbeit führt zwei neue Choreographiesprachen dieses zweiten Modellierungsstils ein, welche bereits in industrielle Standardisierungsinitiativen eingeflossen sind. Während auf der einen Seite zahlreiche Fallstricke der Verlinkungsmodellierung umgangen werden, können in Interaktionsmodellen allerdings neue Anomalien entstehen. Eine Choreographie kann z.B. "unrealisierbar" sein, d.h. es ist nicht möglich interagierende Rollen zu finden, die zusammen genommen das spezifizierte Verhalten abbilden. Dieses Phänomen wird in dieser Arbeit über verschiedene Dimensionen von Realisierbarkeit untersucht. KW - Prozessmodellierung KW - Choreographien KW - Interaktionsmodellierung KW - Verifikation KW - Sprachdesign KW - Process modeling KW - choreographies KW - interaction modeling KW - verification KW - language design Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-40761 ER - TY - THES A1 - Böhne, Sebastian T1 - Different degrees of formality T1 - Verschiedene Formalitätsgrade BT - an introduction to the concept and a demonstration of its usefulness BT - Vorstellung des Konzepts und Nachweis seiner Nützlichkeit N2 - In this thesis we introduce the concept of the degree of formality. It is directed against a dualistic point of view, which only distinguishes between formal and informal proofs. This dualistic attitude does not respect the differences between the argumentations classified as informal and it is unproductive because the individual potential of the respective argumentation styles cannot be appreciated and remains untapped. This thesis has two parts. In the first of them we analyse the concept of the degree of formality (including a discussion about the respective benefits for each degree) while in the second we demonstrate its usefulness in three case studies. In the first case study we will repair Haskell B. Curry's view of mathematics, which incidentally is of great importance in the first part of this thesis, in light of the different degrees of formality. In the second case study we delineate how awareness of the different degrees of formality can be used to help students to learn how to prove. Third, we will show how the advantages of proofs of different degrees of formality can be combined by the development of so called tactics having a medium degree of formality. Together the three case studies show that the degrees of formality provide a convincing solution to the problem of untapped potential. N2 - In dieser Dissertation stellen wir das Konzept der Formalitätsgrade vor, welches sich gegen eine dualistische Sichtweise richtet, die nur zwischen formalen und informalen Beweisen unterscheidet. Letztere Sichtweise spiegelt nämlich die Unterschiede zwischen den als informal klassifizierten Argumentationen nicht wieder und ist außerdem unproduktiv, weil sie nicht in der Lage ist, das individuelle Potential der jeweiligen Argumentationsstile wertzuschätzen und auszuschöpfen. Die Dissertation hat zwei Teile. Im ersten analysieren wir das Konzept der Formalitätsgrade (eine Diskussion über die Vorteile der jeweiligen Grade eingeschlossen), während wir im zweiten Teil die Nützlichkeit der Formalitätsgrade anhand von drei Fallbeispielen nachweisen. Im ersten von diesen werden wir Haskell B. Currys Sichtweise zur Mathematik, die nebenbei bemerkt von größter Wichtigkeit für den ersten Teil der Dissertation ist, mithilfe der verschiedenen Formalitätsgrade reparieren. Im zweiten Fallbeispiel zeigen wir auf, wie die Beachtung der verschiedenen Formalitätsgrade den Studenten dabei helfen kann, das Beweisen zu erlernen. Im letzten Fallbeispiel werden wir dann zeigen, wie die Vorteile von Beweisen verschiedener Formalitätsgrade durch die Anwendung sogenannter Taktiken mittleren Formalitätsgrades kombiniert werden können. Zusammen zeigen die drei Fallbeispiele, dass die Formalitätsgrade eine überzeugende Lösung für das Problem des ungenutzten Potentials darstellen. KW - argumentation KW - Coq KW - Curry KW - degree of formality KW - formalism KW - logic KW - mathematics education KW - philosophy of mathematics KW - proof KW - proof assistant KW - proof environment KW - tactic KW - Argumentation KW - Beweis KW - Beweisassistent KW - Beweisumgebung KW - Coq KW - Curry KW - Formalismus KW - Formalitätsgrad KW - Logik KW - Mathematikdidaktik KW - Mathematikphilosophie KW - Taktik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-423795 N1 - CCS -> Applied computing -> Education -> Interactive learning environments CCS -> Theory of computation -> Logic CCS -> Computing methodologies -> Symbolic and algebraic manipulation -> Symbolic and algebraic algorithms -> Theorem proving algorithms ER - TY - THES A1 - Przybylla, Mareen T1 - From Embedded Systems to Physical Computing: Challenges of the “Digital World” in Secondary Computer Science Education T1 - Von Eingebetteten Systemen zu Physical Computing: Herausforderungen der “Digitalen Welt” in der informatischen Bildung im Sekundarbereich N2 - Physical computing covers the design and realization of interactive objects and installations and allows learners to develop concrete, tangible products of the real world, which arise from their imagination. This can be used in computer science education to provide learners with interesting and motivating access to the different topic areas of the subject in constructionist and creative learning environments. However, if at all, physical computing has so far mostly been taught in afternoon clubs or other extracurricular settings. Thus, for the majority of students so far there are no opportunities to design and create their own interactive objects in regular school lessons. Despite its increasing popularity also for schools, the topic has not yet been clearly and sufficiently characterized in the context of computer science education. The aim of this doctoral thesis therefore is to clarify physical computing from the perspective of computer science education and to adequately prepare the topic both content-wise and methodologically for secondary school teaching. For this purpose, teaching examples, activities, materials and guidelines for classroom use are developed, implemented and evaluated in schools. In the theoretical part of the thesis, first the topic is examined from a technical point of view. A structured literature analysis shows that basic concepts used in physical computing can be derived from embedded systems, which are the core of a large field of different application areas and disciplines. Typical methods of physical computing in professional settings are analyzed and, from an educational perspective, elements suitable for computer science teaching in secondary schools are extracted, e. g. tinkering and prototyping. The investigation and classification of suitable tools for school teaching show that microcontrollers and mini computers, often with extensions that greatly facilitate the handling of additional components, are particularly attractive tools for secondary education. Considering the perspectives of science, teachers, students and society, in addition to general design principles, exemplary teaching approaches for school education and suitable learning materials are developed and the design, production and evaluation of a physical computing construction kit suitable for teaching is described. In the practical part of this thesis, with “My Interactive Garden”, an exemplary approach to integrate physical computing in computer science teaching is tested and evaluated in different courses and refined based on the findings in a design-based research approach. In a series of workshops on physical computing, which is based on a concept for constructionist professional development that is developed specifically for this purpose, teachers are empowered and encouraged to develop and conduct physical computing lessons suitable for their particular classroom settings. Based on their in-class experiences, a process model of physical computing teaching is derived. Interviews with those teachers illustrate that benefits of physical computing, including the tangibility of crafted objects and creativity in the classroom, outweigh possible drawbacks like longer preparation times, technical difficulties or difficult assessment. Hurdles in the classroom are identified and possible solutions discussed. Empirical investigations in the different settings reveal that “My Interactive Garden” and physical computing in general have a positive impact, among others, on learner motivation, fun and interest in class and perceived competencies. Finally, the results from all evaluations are combined to evaluate the design principles for physical computing teaching and to provide a perspective on the development of decision-making aids for physical computing activities in school education. N2 - Physical Computing ist die Gestaltung interaktiver Objekte und Installationen und ermöglicht Lernenden, konkrete, greifbare Produkte der realen Welt zu schaffen, die ihrer eigenen Vorstellung entsprechen. Dies kann in der informatischen Bildung genutzt werden, um Lernenden einen interessanten und motivierenden Zugang zu den verschiedenen Themengebieten des Lerngegenstandes in konstruktionistischen und kreativen Lernumgebungen anzubieten. Bisher wurde Physical Computing allerdings, wenn überhaupt, vorrangig in Nachmittagsaktivitäten und anderen extracurricularen Kontexten unterrichtet. Daher hat ein Großteil aller Schülerinnen und Schüler bisher keine Gelegenheit, im Rahmen von Schulunterricht selbst gestalterisch tätig zu werden und interaktive Objekte herzustellen. Trotz zunehmender Popularität, auch in Schulen, wurde das Thema bisher im Kontext der informatischen Bildung nicht hinreichend klar charakterisiert. Ziel dieser Dissertation ist es daher, Physical Computing aus informatikdidaktischer Sicht zu klären und sowohl inhaltlich als auch methodisch adäquat für den Schulunterricht in den Sekundarstufen aufzubereiten. Dazu werden Unterrichtsbeispiele, -aktivitäten, -materialien und -empfehlungen entwickelt, in Schulen eingesetzt und evaluiert. Im theoretischen Teil der Arbeit wird das Thema zunächst aus fachlicher Perspektive untersucht. Eine strukturierte Literaturanalyse zeigt, dass grundlegende Konzepte des Physical Computings aus dem Fachgebiet Eingebettete Systeme abgeleitet werden können, welches den Kern diverser Anwendungsgebiete und Disziplinen bildet. Typische Methoden des Physical Computings werden analysiert und geeignete Elemente für den Informatikunterricht der Sekundarstufen werden aus didaktischer Perspektive herausgearbeitet, beispielsweise Tinkering und Prototyping. Bei der Untersuchung und Klassifikation geeigneter Werkzeuge für den Schulunterricht kristallisieren sich Mikrocontroller und Mini-Computer, oft mit Erweiterungen zur deutlichen Vereinfachung der Handhabung zusätzlicher Komponenten, als besonders attraktive Werkzeuge für die Sekundarstufen heraus. Unter Berücksichtigung der Perspektiven der Fachwissenschaft, Lehrer, Schüler und Gesellschaft werden zusätzlich zu allgemeinen Gestaltungsprinzipien auch beispielhafte Unterrichtsansätze für die schulische Bildung und geeignete Lernmaterialien entwickelt und der Entwurf, die Produktion und Evaluation eines für den Unterricht geeigneten Physical-Computing-Baukastens beschrieben. Im praktischen Teil der Arbeit wird in einem Design-Based-Research-Ansatz mit „My Interactive Garden“ eine beispielhafte Umsetzung von Physical Computing im Informatikunterricht in verschiedenen Kursen getestet, evaluiert und entsprechend der Erkenntnisse überarbeitet. In einer Workshopreihe zum Thema Physical Computing, welche auf einem eigens entwickelten konstruktionistischen Lehrerfortbildungskonzept basiert, werden Lehrer befähigt und ermutigt, für ihre konkreten Unterrichtssituationen geeigneten Physical-Computing-Unterricht zu planen und durchzuführen. Aus ihren Unterrichtserfahrungen wird ein Prozessmodell für Physical-Computing-Unterricht abgeleitet. Interviews mit diesen Lehrern illustrieren, dass Vorteile des Physical Computings, z. B. die Greifbarkeit gebastelter Objekte und Kreativität im Unterricht, mögliche Nachteile wie längere Vorbereitungszeiten, technische Schwierigkeiten oder schwierige Leistungsbewertung, überwiegen. Hürden im Unterricht werden identifiziert und mögliche Ansätze, diese zu umgehen, diskutiert. Empirische Untersuchungen in den verschiedenen Unterrichtsumsetzungen zeigen, das sowohl „My Interactive Garden“ als auch Physical Computing im Allgemeinen einen positiven Einfluss unter anderem auf Lernermotivation, Spaß und Interesse im Unterricht und wahrgenommene Kompetenzen haben. Abschließend werden die Ergebnisse aller Untersuchungen zusammengeführt, um die Gestaltungsprinzipien für Physical-Computing-Unterricht zu evaluieren und einen Ausblick auf die Entwicklung von Entscheidungshilfen für Physical-Computing-Aktivitäten in der schulischen Bildung zu geben. KW - secondary computer science education KW - embedded systems KW - physical computing KW - educational reconstruction KW - design principles KW - classroom material KW - tools for teaching KW - informatische Bildung im Sekundarbereich KW - eingebettete Systeme KW - physical Computing KW - didaktische Rekonstruktion KW - Entwurfsprinzipien KW - Schulmaterial KW - Unterrichtswerkzeuge Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418339 ER - TY - CHAP A1 - Kiy, Alexander A1 - Geßner, Hendrik A1 - Lucke, Ulrike A1 - Grünewald, Franka T1 - A Hybrid and Modular Framework for Mobile Campus Applications T2 - i-com N2 - Mobile devices and associated applications (apps) are an indispensable part of daily life and provide access to important information anytime and anywhere. However, the availability of university-wide services in the mobile sector is still poor. If they exist they usually result from individual activities of students and teachers. Mobile applications can have an essential impact on the improvement of students’ self-organization as well as on the design and enhancement of specific learning scenarios, though. This article introduces a mobile campus app framework, which integrates central campus services and decentralized learning applications. An analysis of strengths and weaknesses of different approaches is presented to summarize and evaluate them in terms of requirements, development, maintenance and operation. The article discusses the underlying service-oriented architecture that allows transferring the campus app to other universities or institutions at reasonable cost. It concludes with a presentation of the results as well as ongoing discussions and future work KW - Mobile Campus Application KW - Hybrid App KW - Framework KW - Service-oriented Architecture Y1 - 2015 UR - http://www.degruyter.com/view/j/icom.2015.14.issue-1/icom-2015-0016/icom-2015-0016.xml U6 - https://doi.org/10.1515/icom-2015-0016 SN - 2196-6826 VL - 2015 IS - 14 SP - 63 EP - 73 PB - de Gruyter CY - Berlin ER - TY - JOUR A1 - Kiy, Alexander T1 - Digitale Medien & Hochschul-Cloud: Eine vielversprechende Verbindung JF - eleed N2 - Ob Online-Kurse, videobasierte Lehrangebote, mobile Applikationen, eigenentwickelte oder kommerzielle Web 2.0-Anwendungen, die Fülle digitaler Unterstützungsangebote ist kaum zu überblicken. Dabei bieten mobile Endgeräte, Web-Anwendungen und Apps Chancen Lehre, Studium und Forschung maßgeblich neu zu gestalten. Im Beitrag wird ein Beschreibungsrahmen für die mediendidaktische Ausgestaltung von Lehr-, Lern- und Forschungsarrangements vorgestellt, der die technischen Gesichtspunkte hervorhebt. Anschließend werden unterschiedliche Nutzungsszenarien unter Einbeziehung digitaler Medien skizziert. Diese werden als Ausgangspunkt genommen um das Konzept einer Systemarchitektur vorzustellen, die es zum einen ermöglicht beliebige Applikationen automatisiert bereit zu stellen und zum anderen die anfallenden Nutzendendaten plattformübergreifend zu aggregieren und für eine Ausgestaltung virtueller Lehr- und Lernräumen zu nutzen. KW - e-learning KW - Digitale Medien KW - Berliner Modell KW - TPACK KW - Hochschullehre KW - Hochschul-Cloud KW - xAPI KW - SaaSAbstract Y1 - 2018 UR - https://eleed.campussource.de/archive/se2018/4659 IS - 12 ER - TY - CHAP A1 - Kiy, Alexander A1 - Hofhues, Sandra ED - Bücker, Diana ED - Lucke, Ulrike ED - Hofhues, Sandra ED - Dander, Valentin ED - Rau, Franco ED - Rohland, Holger ED - Van Treeck, Timo T1 - Persönliche Lernumgebungen im Spannungsfeld der institutionalisierten Lehre der Hochschule BT - Designprinzipien für eine hybride PLE. T2 - "Trendy, hip und cool". Auf dem Weg zu einer innovativen Hochschule? N2 - Die zunehmende Digitalisierung des Lebens hält in vielen Bereichen Einzug. Im Sinne der Forderung nach lebenslangem Lernen und mit dem Ziel den vielfältigen sich ändernden Anforderungen des täglichen Lebens erfolgreich zu begegnen, bedarf es der Schaffung einer individuellen und persönlichen Lernumgebung jedes Einzelnen. Dieser Beitrag setzt sich zunächst kritisch mit dem Begriff der persönlichen Lernumgebung auseinander. Darauf aufbauend wird der Betrachtungsrahmen auf die Verwendung innerhalb der Institution Hochschule eingeengt. Hieraus erwachsen sowohl Herausforderungen als auch Divergenzen im Spannungsfeld zwischen institutioneller und persönlicher Lernumgebung, die innerhalb eines offenen Gestaltungsprozesses zu lösen sind, sodass sich allgemeingültige Designprinzipien institutioneller persönlicher Lernumgebungen ableiten lassen. KW - Multimedia KW - Lehre KW - Kommunismus KW - Internet KW - Deutschland Y1 - 2017 SN - 978-3-7639-5790-3 U6 - https://doi.org/10.3278/6004551w SP - 117 EP - 126 PB - Bertelsmann CY - Bielefeld ER - TY - CHAP A1 - Kiy, Alexander A1 - Lucke, Ulrike A1 - Zoerner, Dietmar T1 - An adaptive personal learning environment architecture T2 - Architecture of Computing Systems – ARCS 2014 Lecture Notes in Computer Science N2 - Institutions are facing the challenge to integrate legacy systems with steadily growing new ones, using different technologies and interaction patterns. With the demand of offering the best potential of all systems, several not matching systems including their functions have to be aggregated and offered in a useable way. This paper presents an adaptive, generalizable and self-organized Personal Learning Environment (PLE) framework with the potential to integrate several heterogeneous services using a service-oriented architecture. First, a general overview over the field is given, followed by the description of the core components of the PLE framework. A prototypical implementation is presented. Finally, it’s shown how the PLE framework can be dynamically adapted to a changing system environment, reflecting experiences from first user studies. KW - Service-oriented architecture KW - Personal Learning Environment KW - University Service Bus Y1 - 2014 SN - 978-3-319-04890-1 VL - 2014 IS - 8350 SP - 60 EP - 71 PB - Springer ER - TY - CHAP A1 - Kiy, Alexander A1 - Grünwald, Franka A1 - Zoerner, Dietmar A1 - Lucke, Ulrike ED - Trasch, Stephan ED - Plötzner, Rolf ED - Schneider, Gerhard ED - Sassiat, Daniel ED - Gayer, Claudia ED - Wöhrle, Nicole T1 - Ein Hochschul-App-Framework: Hybrid und modular T2 - DeLFI 2014 - Die 12. e-Learning Fachtagung Informatik Lecture Notes in Informatics N2 - Mobile Endgeräte und die dazugehörigen Applikationen sind zu einem unverzichtbaren Bestandteil des täglichen Lebens geworden und ermöglichen den ortsund zeitunabhängigen Zugriff auf wichtige Informationen. Hochschulspezifische An- gebote sind im mobilen Bereich hingegen noch immer nicht flächendeckend anzutreffen und lassen sich i. d. R. nur auf Einzelaktivitäten Studierender und Lehrender zurückführen. Dabei können mobile Applikationen einen essentiellen Beitrag zur Verbesserung der studentischen Selbstorganisation sowie für die Ausgestaltung und Ergänzung von konkreten Lehr-/Lernszenarien leisten. Dieser Artikel stellt ein modulares Hochschul-App-Framework vor, das sowohl zentrale campusbezogene Dienste als auch dezentrale Lernapplikationen unter einer Oberfläche vereint anbietet. Anhand einer Analyse von Stärken und Schwächen werden verschiedene Ansätze in Hinblick auf Anforderungen, Entwicklung, Wartung und Betrieb der Hochschul-App zusammengefasst und bewertet. Es wird auf die zugrundeliegende serviceorientierte Architektur eingegangen, die eine Portierung der Applikation auf andere Hochschulen mit einem vertretbaren Aufwand ermöglicht. Der Beitrag schließt mit einer Darstellung der ersten Ergebnisse und weiterführender Überlegungen und Arbeiten. Y1 - 2014 UR - https://subs.emis.de/LNI/Proceedings/Proceedings233/article18.html SN - 978-3-88579-627-5 IS - P-233 SP - 205 EP - 216 PB - Gesellschaft für Informatik e.V. CY - Bonn ER - TY - JOUR A1 - Dornhege, Guido A1 - Blankertz, Benjamin A1 - Krauledat, Matthias A1 - Losch, Florian A1 - Curio, Gabriel A1 - Müller, Klaus-Robert T1 - Combined optimization of spatial and temporal filters for improving brain-computer interfacing JF - IEEE transactions on bio-medical electronics N2 - Brain-computer interface (BCI) systems create a novel communication channel from the brain to an output de ice by bypassing conventional motor output pathways of nerves and muscles. Therefore they could provide a new communication and control option for paralyzed patients. Modern BCI technology is essentially based on techniques for the classification of single-trial brain signals. Here we present a novel technique that allows the simultaneous optimization of a spatial and a spectral filter enhancing discriminability rates of multichannel EEG single-trials. The evaluation of 60 experiments involving 22 different subjects demonstrates the significant superiority of the proposed algorithm over to its classical counterpart: the median classification error rate was decreased by 11%. Apart from the enhanced classification, the spatial and/or the spectral filter that are determined by the algorithm can also be used for further analysis of the data, e.g., for source localization of the respective brain rhythms. KW - brain-computer interface KW - common spatial patterns KW - EEG KW - event-related desynchronization KW - single-trial-analysis Y1 - 2006 U6 - https://doi.org/10.1109/TBME.2006.883649 SN - 0018-9294 VL - 53 IS - 11 SP - 2274 EP - 2281 PB - IEEE CY - New York ER - TY - JOUR A1 - Bordihn, Henning A1 - Holzer, Markus T1 - Programmed grammars and their relation to the LBA problem JF - Acta informatica N2 - We consider generating and accepting programmed grammars with bounded degree of non-regulation, that is, the maximum number of elements in success or in failure fields of the underlying grammar. In particular, it is shown that this measure can be restricted to two without loss of descriptional capacity, regardless of whether arbitrary derivations or left-most derivations are considered. Moreover, in some cases, precise characterizations of the linear bounded automaton problem in terms of programmed grammars are obtained. Thus, the results presented in this paper shed new light on some longstanding open problem in the theory of computational complexity. KW - programmed grammars KW - accepting grammars KW - LBA problem KW - degree of non-regulation KW - leftmost derivations Y1 - 2006 U6 - https://doi.org/10.1007/s00236-006-0017-9 SN - 0001-5903 VL - 43 SP - 223 EP - 242 PB - Elsevier CY - New York ER - TY - JOUR A1 - Prasse, Paul A1 - Iversen, Pascal A1 - Lienhard, Matthias A1 - Thedinga, Kristina A1 - Bauer, Christopher A1 - Herwig, Ralf A1 - Scheffer, Tobias T1 - Matching anticancer compounds and tumor cell lines by neural networks with ranking loss JF - NAR: genomics and bioinformatics N2 - Computational drug sensitivity models have the potential to improve therapeutic outcomes by identifying targeted drug components that are likely to achieve the highest efficacy for a cancer cell line at hand at a therapeutic dose. State of the art drug sensitivity models use regression techniques to predict the inhibitory concentration of a drug for a tumor cell line. This regression objective is not directly aligned with either of these principal goals of drug sensitivity models: We argue that drug sensitivity modeling should be seen as a ranking problem with an optimization criterion that quantifies a drug's inhibitory capacity for the cancer cell line at hand relative to its toxicity for healthy cells. We derive an extension to the well-established drug sensitivity regression model PaccMann that employs a ranking loss and focuses on the ratio of inhibitory concentration and therapeutic dosage range. We find that the ranking extension significantly enhances the model's capability to identify the most effective anticancer drugs for unseen tumor cell profiles based in on in-vitro data. Y1 - 2022 U6 - https://doi.org/10.1093/nargab/lqab128 SN - 2631-9268 VL - 4 IS - 1 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Steinert, Fritjof A1 - Stabernack, Benno T1 - Architecture of a low latency H.264/AVC video codec for robust ML based image classification how region of interests can minimize the impact of coding artifacts JF - Journal of Signal Processing Systems for Signal, Image, and Video Technology N2 - The use of neural networks is considered as the state of the art in the field of image classification. A large number of different networks are available for this purpose, which, appropriately trained, permit a high level of classification accuracy. Typically, these networks are applied to uncompressed image data, since a corresponding training was also carried out using image data of similar high quality. However, if image data contains image errors, the classification accuracy deteriorates drastically. This applies in particular to coding artifacts which occur due to image and video compression. Typical application scenarios for video compression are narrowband transmission channels for which video coding is required but a subsequent classification is to be carried out on the receiver side. In this paper we present a special H.264/Advanced Video Codec (AVC) based video codec that allows certain regions of a picture to be coded with near constant picture quality in order to allow a reliable classification using neural networks, whereas the remaining image will be coded using constant bit rate. We have combined this feature with the ability to run with lowest latency properties, which is usually also required in remote control applications scenarios. The codec has been implemented as a fully hardwired High Definition video capable hardware architecture which is suitable for Field Programmable Gate Arrays. KW - H.264 KW - Advanced Video Codec (AVC) KW - Low Latency KW - Region of Interest KW - Machine Learning KW - Inference KW - FPGA KW - Hardware accelerator Y1 - 2022 U6 - https://doi.org/10.1007/s11265-021-01727-2 SN - 1939-8018 SN - 1939-8115 VL - 94 IS - 7 SP - 693 EP - 708 PB - Springer CY - New York ER - TY - JOUR A1 - Bauer, Chris A1 - Herwig, Ralf A1 - Lienhard, Matthias A1 - Prasse, Paul A1 - Scheffer, Tobias A1 - Schuchhardt, Johannes T1 - Large-scale literature mining to assess the relation between anti-cancer drugs and cancer types JF - Journal of translational medicine N2 - Background: There is a huge body of scientific literature describing the relation between tumor types and anti-cancer drugs. The vast amount of scientific literature makes it impossible for researchers and physicians to extract all relevant information manually. Methods: In order to cope with the large amount of literature we applied an automated text mining approach to assess the relations between 30 most frequent cancer types and 270 anti-cancer drugs. We applied two different approaches, a classical text mining based on named entity recognition and an AI-based approach employing word embeddings. The consistency of literature mining results was validated with 3 independent methods: first, using data from FDA approvals, second, using experimentally measured IC-50 cell line data and third, using clinical patient survival data. Results: We demonstrated that the automated text mining was able to successfully assess the relation between cancer types and anti-cancer drugs. All validation methods showed a good correspondence between the results from literature mining and independent confirmatory approaches. The relation between most frequent cancer types and drugs employed for their treatment were visualized in a large heatmap. All results are accessible in an interactive web-based knowledge base using the following link: . Conclusions: Our approach is able to assess the relations between compounds and cancer types in an automated manner. Both, cancer types and compounds could be grouped into different clusters. Researchers can use the interactive knowledge base to inspect the presented results and follow their own research questions, for example the identification of novel indication areas for known drugs. KW - Literature mining KW - Anti-cancer drugs KW - Tumor types KW - Word embeddings KW - Database Y1 - 2021 U6 - https://doi.org/10.1186/s12967-021-02941-z SN - 1479-5876 VL - 19 IS - 1 PB - BioMed Central CY - London ER - TY - GEN A1 - Marwecki, Sebastian A1 - Baudisch, Patrick T1 - Scenograph BT - Fitting Real-Walking VR Experiences into Various Tracking Volumes T2 - UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology N2 - When developing a real-walking virtual reality experience, designers generally create virtual locations to fit a specific tracking volume. Unfortunately, this prevents the resulting experience from running on a smaller or differently shaped tracking volume. To address this, we present a software system called Scenograph. The core of Scenograph is a tracking volume-independent representation of real-walking experiences. Scenograph instantiates the experience to a tracking volume of given size and shape by splitting the locations into smaller ones while maintaining narrative structure. In our user study, participants' ratings of realism decreased significantly when existing techniques were used to map a 25m2 experience to 9m2 and an L-shaped 8m2 tracking volume. In contrast, ratings did not differ when Scenograph was used to instantiate the experience. KW - Virtual reality KW - real-walking KW - locomotion Y1 - 2018 SN - 978-1-4503-5948-1 U6 - https://doi.org/10.1145/3242587.3242648 SP - 511 EP - 520 PB - Association for Computing Machinery CY - New York ER - TY - JOUR A1 - Bailis, Peter A1 - Dillahunt, Tawanna A1 - Müller, Stefanie A1 - Baudisch, Patrick T1 - Research for Practice: Technology for Underserved Communities; Personal Fabrication JF - Communications of the ACM / Association for Computing Machinery N2 - THIS INSTALLMENT OF Research for Practice provides curated reading guides to technology for underserved communities and to new developments in personal fabrication. First, Tawanna Dillahunt describes design considerations and technology for underserved and impoverished communities. Designing for the more than 1.6 billion impoverished individuals worldwide requires special consideration of community needs, constraints, and context. Her selections span protocols for poor-quality communication networks, community-driven content generation, and resource and public service discovery. Second, Stefanie Mueller and Patrick Baudisch provide an overview of recent advances in personal fabrication (for example, 3D printers). Y1 - 2017 U6 - https://doi.org/10.1145/3080188 SN - 0001-0782 SN - 1557-7317 VL - 60 SP - 46 EP - 49 PB - Association for Computing Machinery CY - New York ER - TY - JOUR A1 - Huang, Yizhen A1 - Richter, Eric A1 - Kleickmann, Thilo A1 - Wiepke, Axel A1 - Richter, Dirk T1 - Classroom complexity affects student teachers’ behavior in a VR classroom JF - Computers & education : an international journal N2 - Student teachers often struggle to keep track of everything that is happening in the classroom, and particularly to notice and respond when students cause disruptions. The complexity of the classroom environment is a potential contributing factor that has not been empirically tested. In this experimental study, we utilized a virtual reality (VR) classroom to examine whether classroom complexity affects the likelihood of student teachers noticing disruptions and how they react after noticing. Classroom complexity was operationalized as the number of disruptions and the existence of overlapping disruptions (multidimensionality) as well as the existence of parallel teaching tasks (simultaneity). Results showed that student teachers (n = 50) were less likely to notice the scripted disruptions, and also less likely to respond to the disruptions in a comprehensive and effortful manner when facing greater complexity. These results may have implications for both teacher training and the design of VR for training or research purpose. This study contributes to the field from two aspects: 1) it revealed how features of the classroom environment can affect student teachers' noticing of and reaction to disruptions; and 2) it extends the functionality of the VR environment-from a teacher training tool to a testbed of fundamental classroom processes that are difficult to manipulate in real-life. KW - Augmented and virtual reality KW - Simulations KW - Improving classroom KW - teaching KW - Media in education KW - Pedagogical issues Y1 - 2021 U6 - https://doi.org/10.1016/j.compedu.2020.104100 SN - 0360-1315 SN - 1873-782X VL - 163 PB - Elsevier CY - Oxford ER - TY - THES A1 - Holz, Christian T1 - 3D from 2D touch T1 - 3D von 2D-Berührungen N2 - While interaction with computers used to be dominated by mice and keyboards, new types of sensors now allow users to interact through touch, speech, or using their whole body in 3D space. These new interaction modalities are often referred to as "natural user interfaces" or "NUIs." While 2D NUIs have experienced major success on billions of mobile touch devices sold, 3D NUI systems have so far been unable to deliver a mobile form factor, mainly due to their use of cameras. The fact that cameras require a certain distance from the capture volume has prevented 3D NUI systems from reaching the flat form factor mobile users expect. In this dissertation, we address this issue by sensing 3D input using flat 2D sensors. The systems we present observe the input from 3D objects as 2D imprints upon physical contact. By sampling these imprints at very high resolutions, we obtain the objects' textures. In some cases, a texture uniquely identifies a biometric feature, such as the user's fingerprint. In other cases, an imprint stems from the user's clothing, such as when walking on multitouch floors. By analyzing from which part of the 3D object the 2D imprint results, we reconstruct the object's pose in 3D space. While our main contribution is a general approach to sensing 3D input on 2D sensors upon physical contact, we also demonstrate three applications of our approach. (1) We present high-accuracy touch devices that allow users to reliably touch targets that are a third of the size of those on current touch devices. We show that different users and 3D finger poses systematically affect touch sensing, which current devices perceive as random input noise. We introduce a model for touch that compensates for this systematic effect by deriving the 3D finger pose and the user's identity from each touch imprint. We then investigate this systematic effect in detail and explore how users conceptually touch targets. Our findings indicate that users aim by aligning visual features of their fingers with the target. We present a visual model for touch input that eliminates virtually all systematic effects on touch accuracy. (2) From each touch, we identify users biometrically by analyzing their fingerprints. Our prototype Fiberio integrates fingerprint scanning and a display into the same flat surface, solving a long-standing problem in human-computer interaction: secure authentication on touchscreens. Sensing 3D input and authenticating users upon touch allows Fiberio to implement a variety of applications that traditionally require the bulky setups of current 3D NUI systems. (3) To demonstrate the versatility of 3D reconstruction on larger touch surfaces, we present a high-resolution pressure-sensitive floor that resolves the texture of objects upon touch. Using the same principles as before, our system GravitySpace analyzes all imprints and identifies users based on their shoe soles, detects furniture, and enables accurate touch input using feet. By classifying all imprints, GravitySpace detects the users' body parts that are in contact with the floor and then reconstructs their 3D body poses using inverse kinematics. GravitySpace thus enables a range of applications for future 3D NUI systems based on a flat sensor, such as smart rooms in future homes. We conclude this dissertation by projecting into the future of mobile devices. Focusing on the mobility aspect of our work, we explore how NUI devices may one day augment users directly in the form of implanted devices. N2 - Die Interaktion mit Computern war in den letzten vierzig Jahren stark von Tastatur und Maus geprägt. Neue Arten von Sensoren ermöglichen Computern nun, Eingaben durch Berührungs-, Sprach- oder 3D-Gestensensoren zu erkennen. Solch neuartige Formen der Interaktion werden häufig unter dem Begriff "natürliche Benutzungsschnittstellen" bzw. "NUIs" (englisch natural user interfaces) zusammengefasst. 2D-NUIs ist vor allem auf Mobilgeräten ein Durchbruch gelungen; über eine Milliarde solcher Geräte lassen sich durch Berührungseingaben bedienen. 3D-NUIs haben sich jedoch bisher nicht auf mobilen Plattformen durchsetzen können, da sie Nutzereingaben vorrangig mit Kameras aufzeichnen. Da Kameras Bilder jedoch erst ab einem gewissen Abstand auflösen können, eignen sie sich nicht als Sensor in einer mobilen Plattform. In dieser Arbeit lösen wir dieses Problem mit Hilfe von 2D-Sensoren, von deren Eingaben wir 3D-Informationen rekonstruieren. Unsere Prototypen zeichnen dabei die 2D-Abdrücke der Objekte, die den Sensor berühren, mit hoher Auflösung auf. Aus diesen Abdrücken leiten sie dann die Textur der Objekte ab. Anhand der Stelle der Objektoberfläche, die den Sensor berührt, rekonstruieren unsere Prototypen schließlich die 3D-Ausrichtung des jeweiligen Objektes. Neben unserem Hauptbeitrag der 3D-Rekonstruktion stellen wir drei Anwendungen unserer Methode vor. (1) Wir präsentieren Geräte, die Berührungseingaben dreimal genauer als existierende Geräte messen und damit Nutzern ermöglichen, dreimal kleinere Ziele zuverlässig mit dem Finger auszuwählen. Wir zeigen dabei, dass sowohl die Haltung des Fingers als auch der Benutzer selbst einen systematischen Einfluss auf die vom Sensor gemessene Position ausübt. Da existierende Geräte weder die Haltung des Fingers noch den Benutzer erkennen, nehmen sie solche Variationen als Eingabeungenauigkeit wahr. Wir stellen ein Modell für Berührungseingabe vor, das diese beiden Faktoren integriert, um damit die gemessenen Eingabepositionen zu präzisieren. Anschließend untersuchen wir, welches mentale Modell Nutzer beim Berühren kleiner Ziele mit dem Finger anwenden. Unsere Ergebnisse deuten auf ein visuelles Modell hin, demzufolge Benutzer Merkmale auf der Oberfläche ihres Fingers an einem Ziel ausrichten. Bei der Analyse von Berührungseingaben mit diesem Modell verschwinden nahezu alle zuvor von uns beobachteten systematischen Effekte. (2) Unsere Prototypen identifizieren Nutzer anhand der biometrischen Merkmale von Fingerabdrücken. Unser Prototyp Fiberio integriert dabei einen Fingerabdruckscanner und einen Bildschirm in die selbe Oberfläche und löst somit das seit Langem bestehende Problem der sicheren Authentifizierung auf Berührungsbildschirmen. Gemeinsam mit der 3D-Rekonstruktion von Eingaben ermöglicht diese Fähigkeit Fiberio, eine Reihe von Anwendungen zu implementieren, die bisher den sperrigen Aufbau aktueller 3D-NUI-Systeme voraussetzten. (3) Um die Flexibilität unserer Methode zu zeigen, implementieren wir sie auf einem großen, berührungsempfindlichen Fußboden, der Objekttexturen bei der Eingabe ebenfalls mit hoher Auflösung aufzeichnet. Ähnlich wie zuvor analysiert unser System GravitySpace diese Abdrücke, um Nutzer anhand ihrer Schuhsolen zu identifizieren, Möbelstücke auf dem Boden zu erkennen und Nutzern präzise Eingaben mittels ihrer Schuhe zu ermöglichen. Indem GravitySpace alle Abdrücke klassifiziert, erkennt das System die Körperteile der Benutzer, die sich in Kontakt mit dem Boden befinden. Aus der Anordnung dieser Kontakte schließt GravitySpace dann auf die Körperhaltungen aller Benutzer in 3D. GravitySpace hat daher das Potenzial, Anwendungen für zukünftige 3D-NUI-Systeme auf einer flachen Oberfläche zu implementieren, wie zum Beispiel in zukünftigen intelligenten Wohnungen. Wie schließen diese Arbeit mit einem Ausblick auf zukünftige interaktive Geräte. Dabei konzentrieren wir uns auf den Mobilitätsaspekt aktueller Entwicklungen und beleuchten, wie zukünftige mobile NUI-Geräte Nutzer in Form implantierter Geräte direkt unterstützen können. KW - HCI KW - Berührungseingaben KW - Eingabegenauigkeit KW - Modell KW - Mobilgeräte KW - HCI KW - touch input KW - input accuracy KW - model KW - mobile devices Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67796 ER - TY - THES A1 - Mueller, Stefanie T1 - Interacting with personal fabrication devices T1 - Interaktion mit Personal Fabrication Geräten N2 - Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions. In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well. We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms. By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output. By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time. We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright. N2 - Personal Fabrication Geräte, wie zum Beispiel 3D Drucker, sind dabei eine Zukunft zu ermöglichen in der selbst Benutzer ohne technisches Fachwissen eigene Objekte erstellen können. Obwohl die Hardware nun verfügbar ist, gibt es derzeit kein geeignetes Interaktionsmodel für Benutzer ohne Fachwissen. Heutzutage werden Objekte mit dem 3D Drucker in einem Stück hergestellt. Da der 3D Druck noch ein sehr langsames Verfahren ist und häufig so lange dauert, dass das Objekt über Nacht hergestellt werden muss, müssen Benutzer sorgfältig alles überprüfen bevor sie den Druckauftrag abschicken, da jeder Fehler einen weiteren Tag Wartezeit bedeuten kann. Benutzer ohne technischen Hintergrund haben jedoch nicht das notwendige Fachwissen um alle Faktoren vorhersagen zu können. In dieser Dissertation schlagen wir vor das Interaktionsmodel von Personal Fabrication Geräten zu ändern, um diese Benutzer besser zu unterstützen. Wir argumentieren, dass die Entwicklung von Personal Fabrication Geräten der Entwicklung von Personal Computern gleicht. Die ersten Computer arbeiteten ein Programm vollständig ab, bevor sie ein Ergebnis an den Benutzer zurückgaben. Durch die Verkleinerung der Interaktionseinheit von ganzen Programmen zu einzelnen Anfragen wurden turn-taking Systeme wie die Kommandozeile möglich. Mit der Einführung von direkter Manipulation konnten Benutzer schließlich kontinuierlich mit dem Program arbeiten: sie erhielten Feedback über jede einzelne Interaktion in Echtzeit. Wir untersuchen in dieser Arbeit ob die gleichen Interaktionskonzepte auf Personal Fabrication Geräte angewendet werden können. Wir beginnen diese Arbeit damit zu untersuchen wie man die Feedbackzeit bei der Interaktion mit ganzen Objekten verkürzen kann. Wir präsentieren eine Methode mit dem Namen Low-fidelity Fabrication, die bis zu 90% Druckzeit spart. Low-fidelity fabrication ist schnell, weil es 3D Modelle als grobe Vorschauobjekte druckt, die aber ausreichen um die Aspekte zu testen, die gerade wichtig sind. Abhängig vom aktuellen Testfokus schlagen wir vor verschiedene Konvertierungen vorzunehmen: Unser System faBrickator ist besonders für die ersten Testläufe geeignet, wenn ein modulares Design wichtig ist. Unser System WirePrint ist besonders nützlich im nächsten Schritt, wenn die Form des Objektes erhalten bleiben soll. Am Ende erlaubt unser System Platener ein Objekt so zu konvertieren, dass die technische Funktion des Objektes bewahrt wird. Wir erklären das Design unserer interaktiven Editoren und die zugrunde liegenden Konvertierungsalgorithmen. Durch die Verkleinerung der Interaktionseinheit auf ein einzelnes Element, wie zum Beispiel einer Linie, untersuchen wir wie man Objekt-basierte Fabrikationssysteme in turn-taking Systeme umwandeln kann. Wir zeigen unser 2D System constructable, das auf einem Laser-Cutter basiert. Benutzer von constructable verwenden einen Laserpointer um auf das Werkstück im Laser-Cutter zu zeichnen. Die Zeichnung wird mit einer Kamera aufgenommen, korrigiert, und anschließend direkt mit dem Laser-Cutter ausgeschnitten. Wir erweitern constructable zu 3D mit unserer neuen Laser-Cutter Technologie Laser-Origami. LaserOrigami erzeugt 3D Objekte, indem es mit dem defokussierten Laser das Werkstück erhitzt bis es verformbar wird, die Schwerkraft biegt das Werkstück anschließend in seine 3D Form. Obwohl constructable und LaserOrigami physisches Feedback schnell erzeugen, ist die Interaktion dennoch am besten als turn-taking zu beschreiben: Benutzer editieren zuerst und sehen danach das Ergebnis. Indem wir die Interaktionseinheit noch einmal verkleinern, nun auf ein einziges Feature, können wir Echtzeitfabrikation erreichen: Benutzereingabe und physisches Feedback sind so eng miteinander verbunden, dass es keine sichtbare Verzögerung mehr gibt. Damit können wir untersuchen, was es bedeutet von turn-taking Systemen zu direkter Manipulation überzugehen. Wir zeigen ein System mit dem Namen FormFab, das solch eine direkte interaktive Kontrolle ermöglicht. FormFab basiert auf dem gleichen Prinzip wie LaserOrigami: Ein Werkstück wird erhitzt bis es verformbar wird. Allerdings verwendet FormFab nicht die Schwerkraft zum verformen, sondern ein pneumatisches System, das Benutzer interaktiv steuern können. Wenn Benutzer den Luftdruck ändern, sehen sie wie sich die Größe der Form in Echtzeit ändert. Dies erlaubt ihnen die beste Entscheidung zu treffen während sie verschiedene Optionen evaluieren. Im letzten Kapitel dieser Dissertation extrapolieren wir die aktuelle Entwicklung in eine Zukunft in der eine große Anzahl von Personen eigene Objekte herstellen werden. Dabei entstehen zwei neue Herausforderungen: Nachhaltigkeit und das Bewahren von intellektuellem Eigentum. KW - human computer interaction KW - 3D printing KW - 3D Drucken KW - Laser Cutten KW - Interaktionsmodel Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100908 ER - TY - JOUR A1 - Brewka, Gerhard A1 - Ellmauthaler, Stefan A1 - Kern-Isberner, Gabriele A1 - Obermeier, Philipp A1 - Ostrowski, Max A1 - Romero, Javier A1 - Schaub, Torsten H. A1 - Schieweck, Steffen T1 - Advanced solving technology for dynamic and reactive applications JF - Künstliche Intelligenz Y1 - 2018 U6 - https://doi.org/10.1007/s13218-018-0538-8 SN - 0933-1875 SN - 1610-1987 VL - 32 IS - 2-3 SP - 199 EP - 200 PB - Springer CY - Heidelberg ER - TY - CHAP A1 - Desel, Jörg A1 - Opel, Simone A1 - Siegeris, Juliane A1 - Draude, Claude A1 - Weber, Gerhard A1 - Schell, Timon A1 - Schwill, Andreas A1 - Thorbrügge, Carsten A1 - Schäfer, Len Ole A1 - Netzer, Cajus Marian A1 - Gerstenberger, Dietrich A1 - Winkelnkemper, Felix A1 - Schulte, Carsten A1 - Böttcher, Axel A1 - Thurner, Veronika A1 - Häfner, Tanja A1 - Ottinger, Sarah A1 - Große-Bölting, Gregor A1 - Scheppach, Lukas A1 - Mühling, Andreas A1 - Baberowski, David A1 - Leonhardt, Thiemo A1 - Rentsch, Susanne A1 - Bergner, Nadine A1 - Bonorden, Leif A1 - Stemme, Jonas A1 - Hoppe, Uwe A1 - Weicker, Karsten A1 - Bender, Esther A1 - Barbas, Helena A1 - Hamann, Fabian A1 - Soll, Marcus A1 - Sitzmann, Daniel ED - Desel, Jörg ED - Opel, Simone ED - Siegeris, Juliane T1 - Hochschuldidaktik Informatik HDI 2021 BT - 9. Fachtagung des GI-Fachbereichs Informatik und Ausbildung/Didaktik der Informatik 15.–16. September 2021 in Dortmund T2 - Commentarii informaticae didacticae N2 - Die Fachtagungen HDI (Hochschuldidaktik Informatik) beschäftigen sich mit den unterschiedlichen Aspekten informatischer Bildung im Hochschulbereich. Neben den allgemeinen Themen wie verschiedenen Lehr- und Lernformen, dem Einsatz von Informatiksystemen in der Hochschullehre oder Fragen der Gewinnung von geeigneten Studierenden, deren Kompetenzerwerb oder auch der Betreuung der Studierenden widmet sich die HDI immer auch einem Schwerpunktthema. Im Jahr 2021 war dies die Berücksichtigung von Diversität in der Lehre. Diskutiert wurden beispielsweise die Einbeziehung von besonderen fachlichen und überfachlichen Kompetenzen Studierender, der Unterstützung von Durchlässigkeit aus nichtakademischen Berufen, aber auch die Gestaltung inklusiver Lehr- und Lernszenarios, Aspekte des Lebenslangen Lernens oder sich an die Diversität von Studierenden adaptierte oder adaptierende Lehrsysteme. Dieser Band enthält ausgewählte Beiträge der 9. Fachtagung 2021, die in besonderer Weise die Konferenz und die dort diskutierten Themen repräsentieren. T3 - Commentarii informaticae didacticae (CID) - 13 KW - Hochschuldidaktik KW - Informatikdidaktik KW - HDI KW - Hochschullehre KW - digitale Hochschullehre KW - Diversität KW - Heterogenität KW - Lebenslanges Lernen KW - Informatikstudium KW - Didaktische Konzepte KW - Assessment Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565070 SN - 978-3-86956-548-4 SN - 1868-0844 SN - 2191-1940 IS - 13 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Hawro, Tomasz A1 - Przybylowicz, Katarzyna A1 - Spindler, Max A1 - Hawro, Marlena A1 - Steć, Michał A1 - Altrichter, Sabine A1 - Weller, Karsten A1 - Magerl, Markus A1 - Reidel, Ulrich A1 - Alarbeed, Ezzat A1 - Alraboni, Ola A1 - Maurer, Marcus A1 - Metz, Martin T1 - The characteristics and impact of pruritus in adult dermatology patients BT - a prospective, cross-sectional study JF - Journal of the American Academy of Dermatology N2 - Background: Pruritus often accompanies chronic skin diseases, exerting considerable burden on many areas of patient functioning; this burden and the features of pruritus remain insufficiently characterized. Objective: To investigate characteristics, including localization patterns, and burden of pruritus in patients with chronic dermatoses. Methods: We recruited 800 patients with active chronic skin diseases. We assessed pruritus intensity, localization, and further characteristics. We used validated questionnaires to assess quality of life, work productivity and activity impairment, anxiety, depression, and sleep quality. Results: Nine out of every 10 patients had experienced pruritus throughout their disease and 73% in the last 7 days. Pruritus often affected the entire body and was not restricted to skin lesions. Patients with moderate to severe pruritus reported significantly more impairment to their sleep quality and work productivity, and they were more depressed and anxious than control individuals and patients with mild or no pruritus. Suicidal ideations were highly prevalent in patients with chronic pruritus (18.5%) and atopic dermatitis (11.8%). Conclusions: Pruritus prevalence and intensity are very high across all dermatoses studied; intensity is linked to impairment in many areas of daily functioning. Effective treatment strategies are urgently required to treat pruritus and the underlying skin disease. ( J Am Acad Dermatol 2021;84:691-700.) KW - activity KW - anxiety KW - depression KW - pruritus KW - quality of life KW - sleep quality KW - suicidal ideations KW - work productivity Y1 - 2021 U6 - https://doi.org/10.1016/J.JAAD.2020.08.035 SN - 0190-9622 SN - 1097-6787 VL - 84 IS - 3 SP - 691 EP - 700 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Luther, Laura A1 - Tiberius, Victor A1 - Brem, Alexander T1 - User experience (UX) in business, management, and psychology BT - a bibliometric mapping of the current state of research JF - Multimodal technologies and interaction : open access journal N2 - User Experience (UX) describes the holistic experience of a user before, during, and after interaction with a platform, product, or service. UX adds value and attraction to their sole functionality and is therefore highly relevant for firms. The increased interest in UX has produced a vast amount of scholarly research since 1983. The research field is, therefore, complex and scattered. Conducting a bibliometric analysis, we aim at structuring the field quantitatively and rather abstractly. We employed citation analyses, co-citation analyses, and content analyses to evaluate productivity and impact of extant research. We suggest that future research should focus more on business and management related topics. KW - bibliometric analysis KW - co-citation analysis KW - co-occurrence analysis KW - citation analysis KW - user experience KW - UX Y1 - 2020 U6 - https://doi.org/10.3390/mti4020018 SN - 2414-4088 VL - 4 IS - 2 PB - MDPI CY - Basel ER - TY - JOUR A1 - Banbara, Mutsunori A1 - Soh, Takehide A1 - Tamura, Naoyuki A1 - Inoue, Katsumi A1 - Schaub, Torsten H. T1 - Answer set programming as a modeling language for course timetabling JF - Theory and practice of logic programming N2 - The course timetabling problem can be generally defined as the task of assigning a number of lectures to a limited set of timeslots and rooms, subject to a given set of hard and soft constraints. The modeling language for course timetabling is required to be expressive enough to specify a wide variety of soft constraints and objective functions. Furthermore, the resulting encoding is required to be extensible for capturing new constraints and for switching them between hard and soft, and to be flexible enough to deal with different formulations. In this paper, we propose to make effective use of ASP as a modeling language for course timetabling. We show that our ASP-based approach can naturally satisfy the above requirements, through an ASP encoding of the curriculum-based course timetabling problem proposed in the third track of the second international timetabling competition (ITC-2007). Our encoding is compact and human-readable, since each constraint is individually expressed by either one or two rules. Each hard constraint is expressed by using integrity constraints and aggregates of ASP. Each soft constraint S is expressed by rules in which the head is the form of penalty (S, V, C), and a violation V and its penalty cost C are detected and calculated respectively in the body. We carried out experiments on four different benchmark sets with five different formulations. We succeeded either in improving the bounds or producing the same bounds for many combinations of problem instances and formulations, compared with the previous best known bounds. KW - answer set programming KW - educational timetabling KW - course timetabling Y1 - 2013 U6 - https://doi.org/10.1017/S1471068413000495 SN - 1471-0684 VL - 13 IS - 2 SP - 783 EP - 798 PB - Cambridge Univ. Press CY - New York ER - TY - GEN A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana A1 - Steffen, Bernhard T1 - Bio-jETI : a framework for semantics-based service composition N2 - Background: The development of bioinformatics databases, algorithms, and tools throughout the last years has lead to a highly distributedworld of bioinformatics services. Without adequatemanagement and development support, in silico researchers are hardly able to exploit the potential of building complex, specialized analysis processes from these services. The Semantic Web aims at thoroughly equipping individual data and services with machine-processable meta-information, while workflow systems support the construction of service compositions. However, even in this combination, in silico researchers currently would have to deal manually with the service interfaces, the adequacy of the semantic annotations, type incompatibilities, and the consistency of service compositions. Results: In this paper, we demonstrate by means of two examples how Semantic Web technology together with an adequate domain modelling frees in silico researchers from dealing with interfaces, types, and inconsistencies. In Bio-jETI, bioinformatics services can be graphically combined to complex services without worrying about details of their interfaces or about type mismatches of the composition. These issues are taken care of at the semantic level by Bio-jETI’s model checking and synthesis features. Whenever possible, they automatically resolve type mismatches in the considered service setting. Otherwise, they graphically indicate impossible/incorrect service combinations. In the latter case, the workflow developermay either modify his service composition using semantically similar services, or ask for help in developing the missing mediator that correctly bridges the detected type gap. Newly developed mediators should then be adequately annotated semantically, and added to the service library for later reuse in similar situations. Conclusion: We show the power of semantic annotations in an adequately modelled and semantically enabled domain setting. Using model checking and synthesis methods, users may orchestrate complex processes from a wealth of heterogeneous services without worrying about interfaces and (type) consistency. The success of this method strongly depends on a careful semantic annotation of the provided services and on its consequent exploitation for analysis, validation, and synthesis. We are convinced that these annotations will become standard, as they will become preconditions for the success and widespread use of (preferred) services in the Semantic Web T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 136 KW - European Bioinformatics Institute KW - Integration KW - Tool KW - Alignment KW - Workflow Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45066 ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana A1 - Steffen, Bernhard ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - Modeling and Execution of Scientific Workflows with the jABC Framework JF - Process Design for Natural Scientists: an agile model-driven approach N2 - We summarize here the main characteristics and features of the jABC framework, used in the case studies as a graphical tool for modeling scientific processes and workflows. As a comprehensive environment for service-oriented modeling and design according to the XMDD (eXtreme Model-Driven Design) paradigm, the jABC offers much more than the pure modeling capability. Associated technologies and plugins provide in fact means for a rich variety of supporting functionality, such as remote service integration, taxonomical service classification, model execution, model verification, model synthesis, and model compilation. We describe here in short both the essential jABC features and the service integration philosophy followed in the environment. In our work over the last years we have seen that this kind of service definition and provisioning platform has the potential to become a core technology in interdisciplinary service orchestration and technology transfer: Domain experts, like scientists not specially trained in computer science, directly define complex service orchestrations as process models and use efficient and complex domain-specific tools in a simple and intuitive way. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 14 EP - 29 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - Scientific Workflows and XMDD JF - Process Design for Natural Scientists: an agile model-driven approach N2 - A major part of the scientific experiments that are carried out today requires thorough computational support. While database and algorithm providers face the problem of bundling resources to create and sustain powerful computation nodes, the users have to deal with combining sets of (remote) services into specific data analysis and transformation processes. Today’s attention to “big data” amplifies the issues of size, heterogeneity, and process-level diversity/integration. In the last decade, especially workflow-based approaches to deal with these processes have enjoyed great popularity. This book concerns a particularly agile and model-driven approach to manage scientific workflows that is based on the XMDD paradigm. In this chapter we explain the scope and purpose of the book, briefly describe the concepts and technologies of the XMDD paradigm, explain the principal differences to related approaches, and outline the structure of the book. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 1 EP - 13 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Wickert, Alexander A1 - Margaria, Tiziana ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - Lessons Learned JF - Process Design for Natural Scientists: an agile model-driven approach N2 - This chapter summarizes the experience and the lessons we learned concerning the application of the jABC as a framework for design and execution of scientific workflows. It reports experiences from the domain modeling (especially service integration) and workflow design phases and evaluates the resulting models statistically with respect to the SIB library and hierarchy levels. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 45 EP - 64 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Wickert, Alexander ED - Lambrecht, Anna-Lena ED - Margaria, Tiziana T1 - The Course's SIB Libraries JF - Process Design for Natural Scientists: an agile model-driven approach N2 - This chapter gives a detailed description of the service framework underlying all the example projects that form the foundation of this book. It describes the different SIB libraries that we made available for the course “Process modeling in the natural sciences” to provide the functionality that was required for the envisaged applications. The students used these SIB libraries to realize their projects. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 30 EP - 44 PB - Springer Verlag CY - Berlin ER - TY - JOUR A1 - Lamprecht, Anna-Lena A1 - Margaria, Tiziana ED - Lamprecht, Anna-Lena ED - Margaria, Tiziana T1 - Scientific workflows and XMDD JF - Process design for natural scientists Y1 - 2015 SN - 978-3-662-45006-2 SP - 1 EP - 13 PB - Springer CY - Berlin ER - TY - JOUR A1 - Naujokat, Stefan A1 - Neubauer, Johannes A1 - Lamprecht, Anna-Lena A1 - Steffen, Bernhard A1 - Joerges, Sven A1 - Margaria, Tiziana T1 - Simplicity-first model-based plug-in development JF - Software : practice & experience N2 - In this article, we present our experience with over a decade of strict simplicity orientation in the development and evolution of plug-ins. The point of our approach is to enable our graphical modeling framework jABC to capture plug-in development in a domain-specific setting. The typically quite tedious and technical plug-in development is shifted this way from a programming task to the modeling level, where it can be mastered also by application experts without programming expertise. We show how the classical plug-in development profits from a systematic domain-specific API design and how the level of abstraction achieved this way can be further enhanced by defining adequate building blocks for high-level plug-in modeling. As the resulting plug-in models can be compiled and deployed automatically, our approach decomposes plug-in development into three phases where only the realization phase requires plug-in-specific effort. By using our modeling framework jABC, this effort boils down to graphical, tool-supported process modeling. Furthermore, we support the automatic completion of process sketches for executability. All this will be illustrated along the most recent plug-in-based evolution of the jABC framework, which witnessed quite some bootstrapping effects. KW - plug-ins KW - simplicity KW - domain-specific APIs KW - process modeling KW - bootstrapping KW - evolution KW - code generation KW - loose programming KW - dynamic service binding Y1 - 2014 U6 - https://doi.org/10.1002/spe.2243 SN - 0038-0644 SN - 1097-024X VL - 44 IS - 3 SP - 277 EP - 297 PB - Wiley-Blackwell CY - Hoboken ER - TY - BOOK A1 - Lamprecht, Anna-Lena A1 - Magaria, Tiziana A1 - Steffen, Bernhard A1 - Sczyrba, Alexander A1 - Hartmeier, Sven A1 - Giegerich, Robert T1 - GeneFisher-P BT - Variations of GneFisher as Process in Bio jETI - (part of "From Components to Processes") T3 - Preprint / Universität Potsdam, Institut für Informatik Y1 - 2007 SN - 0946-7580 VL - 2007, 3 PB - Univ. CY - Potsdam ER - TY - THES A1 - Schröter, Alexander T1 - Erstellung und Evaluation eines Fragebogens zur Erfassung von komplexen Interaktionssituationen in Software-Entwicklungsprojekten T1 - Creation and evaluation of a questionnaire for recording complex interaction situations in software development projects N2 - Die fortschreitende Digitalisierung durchzieht immer mehr Lebensbereiche und führt zu immer komplexeren sozio-technischen Systemen. Obwohl diese Systeme zur Lebenserleichterung entwickelt werden, können auch unerwünschte Nebeneffekte entstehen. Ein solcher Nebeneffekt könnte z.B. die Datennutzung aus Fitness-Apps für nachteilige Versicherungsentscheidungen sein. Diese Nebeneffekte manifestieren sich auf allen Ebenen zwischen Individuum und Gesellschaft. Systeme mit zuvor unerwarteten Nebeneffekten können zu sinkender Akzeptanz oder einem Verlust von Vertrauen führen. Da solche Nebeneffekte oft erst im Gebrauch in Erscheinung treten, bedarf es einer besonderen Betrachtung bereits im Konstruktionsprozess. Mit dieser Arbeit soll ein Beitrag geleistet werden, um den Konstruktionsprozess um ein geeignetes Hilfsmittel zur systematischen Reflexion zu ergänzen. In vorliegender Arbeit wurde ein Analysetool zur Identifikation und Analyse komplexer Interaktionssituationen in Software-Entwicklungsprojekten entwickelt. Komplexe Interaktionssituationen sind von hoher Dynamik geprägt, aus der eine Unvorhersehbarkeit der Ursache-Wirkungs-Beziehungen folgt. Hierdurch können die Akteur*innen die Auswirkungen der eigenen Handlungen nicht mehr überblicken, sondern lediglich im Nachhinein rekonstruieren. Hieraus können sich fehlerhafte Interaktionsverläufe auf vielfältigen Ebenen ergeben und oben genannte Nebeneffekte entstehen. Das Analysetool unterstützt die Konstrukteur*innen in jeder Phase der Entwicklung durch eine angeleitete Reflexion, um potenziell komplexe Interaktionssituationen zu antizipieren und ihnen durch Analyse der möglichen Ursachen der Komplexitätswahrnehmung zu begegnen. Ausgehend von der Definition für Interaktionskomplexität wurden Item-Indikatoren zur Erfassung komplexer Interaktionssituationen entwickelt, die dann anhand von geeigneten Kriterien für Komplexität analysiert werden. Das Analysetool ist als „Do-It-Yourself“ Fragebogen mit eigenständiger Auswertung aufgebaut. Die Genese des Fragebogens und die Ergebnisse der durchgeführten Evaluation an fünf Softwarentwickler*innen werden dargestellt. Es konnte festgestellt werden, dass das Analysetool bei den Befragten als anwendbar, effektiv und hilfreich wahrgenommen wurde und damit eine hohe Akzeptanz bei der Zielgruppe genießt. Dieser Befund unterstützt die gute Einbindung des Analysetools in den Software-Entwicklungsprozess. N2 - Advancing digitalization is permeating more and more areas of life and leading to increasingly complex socio-technical systems. Although these systems are being developed to make life easier, undesirable side effects can also arise. One such side effect could be, for example, the use of data from fitness apps for adverse insurance decisions. These side effects manifest themselves at all levels between the individual and society. Systems with previously unexpected side effects can lead to a decline in acceptance or a loss of trust. Since such side effects often only become apparent during use, special consideration is required during the design process. This work is intended to make a contribution to supplementing the design process with a suitable tool for systematic reflection. In this thesis, an analysis tool was developed to identify and analyze complex interaction situations in software development projects. Complex interaction situations are characterized by high dynamics, resulting in unpredictability of cause-effect relationships. As a result, the actors are no longer able to oversee the effects of their own actions, but can only reconstruct them in retrospect. This can result in incorrect interaction processes on many levels and the side effects mentioned above. The analysis tool supports the designers in each phase of development through guided reflection in order to anticipate potentially complex interaction situations and to counter them by analyzing the possible causes of the perception of complexity. Based on the definition of interaction complexity, item indicators were developed to capture complex interaction situations, which are then analyzed using suitable criteria for complexity. The analysis tool is structured as a "do-it-yourself" questionnaire with independent evaluation. The genesis of the questionnaire and the results of the evaluation carried out on five software developers are presented. It was found that the analysis tool was perceived by the respondents as applicable, effective and helpful and thus enjoys a high level of acceptance among the target group. This finding supports the good integration of the analysis tool into the software development process. KW - Komplexität KW - sozio-technisches System KW - Softwareentwicklung KW - Mensch-Technik-Interaktion KW - Methodik KW - complexity KW - socio-technical system KW - software development KW - human-technology interaction KW - methodology Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-631873 ER - TY - JOUR A1 - Marco Figuera, Ramiro A1 - Riedel, Christian A1 - Rossi, Angelo Pio A1 - Unnithan, Vikram T1 - Depth to diameter analysis on small simple craters at the lunar south pole - possible implications for ice harboring JF - Remote sensing N2 - In this paper, we present a study comparing the depth to diameter (d/D) ratio of small simple craters (200-1000 m) of an area between -88.5 degrees to -90 degrees latitude at the lunar south pole containing Permanent Shadowed Regions (PSRs) versus craters without PSRs. As PSRs can reach temperatures of 110 K and are capable of harboring volatiles, especially water ice, we analyzed the relationship of depth versus diameter ratios and its possible implications for harboring water ice. Variations in the d/D ratios can also be caused by other processes such as degradation, isostatic adjustment, or differences in surface properties. The conducted d/D ratio analysis suggests that a differentiation between craters containing PSRs versus craters without PSRs occurs. Thus, a possible direct relation between d/D ratio, PSRs, and water ice harboring might exist. Our results suggest that differences in the target's surface properties may explain the obtained results. The resulting d/D ratios of craters with PSRs can help to select target areas for future In-Situ Resource Utilization (ISRU) missions. KW - craters KW - lunar exploration KW - ice harboring Y1 - 2022 U6 - https://doi.org/10.3390/rs14030450 SN - 2072-4292 VL - 14 IS - 3 PB - MDPI CY - Basel ER - TY - JOUR A1 - Lucke, Ulrike A1 - Hafer, Jörg A1 - Hartmann, Niklas T1 - Strategieentwicklung in der Hochschule als partizipativer Prozess BT - Beispiele und Erkenntnisse JF - Potsdamer Beiträge zur Hochschulforschung N2 - Die Setzung strategischer Ziele sowie die Zuordnung und Umsetzung dazugehörender Maßnahmen sind ein wesentliches Element, um die Innovationsfähigkeit von Organisationen zu erhalten. In den vergangenen Jahren ist auch an Hochschulen die Strategiebildung deutlich vorangetrieben worden. Dies betrifft verschiedene Handlungsfelder, und es werden verschiedene Ansätze verfolgt. Der vorliegende Beitrag greift am Beispiel der Universität Potsdam drei in den vergangenen Jahren adressierte Strategiebereiche heraus: IT, E-Learning und Forschungsdaten. Die damit verbundenen Prozesse waren in unterschiedlichem Maß von Partizipation geprägt. Die gesammelten Erfahrungen werden reflektiert, und es werden Empfehlungen für Strategieentwicklungsprozesse abgeleitet. KW - Innovation KW - Strategie KW - Partizipation KW - IT-Infrastruktur KW - E-Learning KW - Forschungsdatenmanagement Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-492764 SN - 978-3-86956-498-2 SN - 2192-1075 SN - 2192-1083 IS - 6 SP - 99 EP - 117 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Jiang, Chunyan T1 - Multi-visualization and hybrid segmentation approaches within telemedicine framework T1 - Multi-Visualisierung und hybride Segmentierungsansätze auf dem Gebiet der Telemedizin N2 - The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension. N2 - Innovative Informationstechnologien haben viele Bereiche unseres Lebens verändert. Im Gesundheitsbereich ist es mittels Computer möglich, qualitativ hochwertige und große volumetrische Bilddaten zu verwalten, zu verarbeiten und dadurch die medizinische Betreuung zu unterstützen. In dieser Dissertation stelle ich verschiedene Methoden vor, die Mediziner beim Prozess der Beobachtung, Verarbeitung und Nutzung von Bilddaten verstärkt unterstützten können. Meine Forschungsarbeit befasst sich mit drei Schwerpunktthemen: Telemedizinintegration, Visualisierung von medizinischen Bildern und Bildsegmentierung. Zur Demonstration der Machbarkeit der vorgeschlagenen Methoden implementierte ich zudem eine Anwendungssoftware. Das entwickelte System kann in punkto Telemedizinintegration nicht nur Dateien im DICOM Format lesen und schreiben, sondern auch nicht-standardisierte Dateien reparieren. In meiner Arbeit gebe ich außerdem einen Vorschlag für eine Erweiterung des DICOM Standards für die Speicherung von 3D Bildinformationen. Zur Darstellung der Bilddaten wurden in dem entwickelten System drei verschiedene Ansichten implementiert: Volumen Ansicht, Oberflächen Ansicht sowie Querschnitt Ansicht. Ein Großteil meiner Arbeit ist der Vorschlag eines neuen hybriden Bildsegmentierungsansatzes. Durch das neu vorgeschlagene Verfahren können komplexe neurale MRI Daten effizient und präzise segmentiert werden. Zusätzlich wird der manuelle Arbeitsaufwand der Experten drastisch verringert. KW - medizinisch KW - bild KW - Segmentierung KW - medical KW - image KW - segmentation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12829 ER - TY - THES A1 - Hu, Ji T1 - A virtual machine architecture for IT-security laboratories T1 - Eine virtuelle maschinenbasierte Architektur für IT-Sicherheitslabore N2 - This thesis discusses challenges in IT security education, points out a gap between e-learning and practical education, and presents a work to fill the gap. E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in conventional computer laboratories poses particular problems such as immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. In this thesis, we introduce the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibility to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by a virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present a security management solution to prevent the misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This thesis demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically. N2 - Diese Dissertation beschreibt die Herausforderungen in der IT Sicherheitsausbildung und weist auf die noch vorhandene Lücke zwischen E-Learning und praktischer Ausbildung hin. Sie erklärt einen Ansatz sowie ein System, um diese Lücke zwischen Theorie und Praxis in der elektronischen Ausbildung zu schließen. E-Learning ist eine flexible und personalisierte Alternative zu traditionellen Lernmethoden. Heutigen E-Learning Systemen mangelt es jedoch an der Fähigkeit, praktische Erfahrungen über große Distanzen zu ermöglichen. Labor- bzw. Testumgebungen sowie praktische Übungen sind jedoch unverzichtbar, wenn es um die Ausbildung von Sicherheitsfachkräften geht. Konventionelle Laborumgebungen besitzen allerdings einige Nachteile wie bspw. hoher Erstellungsaufwand, keine Mobilität, hohe Wartungskosten, etc. Die Herausforderung heutiger IT Sicherheitsausbildung ist es daher, praktische Sicherheitslaborumgebungen und Übungen effektiv mittels E-Learning zu unterstützen. In dieser Dissertation wird die Architektur von Tele-Lab IT-Security vorgestellt, die Studenten nicht nur erlaubt theoretische Sicherheitskonzepte zu erlernen, sondern darüber hinaus Sicherheitsübungen in einer Online-Laborumgebung praktisch zu absolvieren. Die Teilnehmer können auf diese Weise wichtige praktische Erfahrungen im Umgang mit Sicherheitsprogrammen sammeln. Zur Realisierung einer sicheren Übungsumgebung, werden virtuelle Maschinen anstatt reale Rechner im Tele-Lab System verwendet. Mittels virtueller Maschinen können leicht Laborumgebungen geklont, verwaltet und über das Internet zugänglich gemacht werden. Im Vergleich zu herkömmlichen Offline-Laboren können somit erhebliche Investitions- und Wartungskosten gespart werden. Das Tele-Lab System bietet eine Reihe von technischen Funktionen, die den effektiven, zuverlässigen und sicheren Betrieb dieses Trainingssystems gewährleistet. Unter Beachtung angemessener Ressourcennutzung, Softwareinstallationen und Systemkonfigurationen wurden virtuelle Maschinen als Übungsstationen erstellt, die auf einem einzelnen Rechner betrieben werden. Für ihre Zuverlässigkeit und Verfügbarkeit ist das Managementsystem der virtuellen Maschinen verantwortlich. Diese Komponente besitzt die notwendigen Überwachungs- und Verwaltungsfunktionen, um kritische Fehler der virtuellen Maschinen während der Laufzeit zu erkennen und zu beheben. Damit die Übungsstationen nicht bspw. zur Kompromittierung von Produktivnetzwerken genutzt werden, beschreibt die Dissertation Sicherheits-Managementlösungen, die mittels Isolation auf System und Netzwerk Ebene genau dieses Risiko verhindern sollen. Diese Arbeit ist der Versuch, die Lücke zwischen E-Learning/Tele-Teaching und praktischer Sicherheitsausbildung zu schließen. Sie verfolgt nicht das Ziel, konventionelle Ausbildung in Offline Laboren zu ersetzen, sondern auch praktische Erfahrungen via E-Learning zu unterstützen. Die Dissertation zeigt die Möglichkeit, praktische Erfahrungen mittels Sicherheitsübungsumgebungen über das Internet auf zuverlässige, sichere und wirtschaftliche Weise zu vermitteln. KW - Computersicherheit KW - VM KW - E-Learning KW - IT security KW - virtual machine KW - E-Learning Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7818 ER - TY - BOOK A1 - Meinel, Christoph A1 - Sack, Harald T1 - Internetworking : technische Grundlagen und Anwendungen Y1 - 2012 SN - 978-3-540-92939-0 U6 - https://doi.org/10.1007/978-3-540-92940-6 PB - Springer-Verlag Berlin Heidelberg CY - Berlin, Heidelberg ER - TY - THES A1 - Ghasemzadeh, Mohammad T1 - A new algorithm for the quantified satisfiability problem, based on zero-suppressed binary decision diagrams and memoization T1 - Ein neuer Algorithmus für die quantifizierte Aussagenlogik, basierend auf Zero-suppressed BDDs und Memoization N2 - Quantified Boolean formulas (QBFs) play an important role in theoretical computer science. QBF extends propositional logic in such a way that many advanced forms of reasoning can be easily formulated and evaluated. In this dissertation we present our ZQSAT, which is an algorithm for evaluating quantified Boolean formulas. ZQSAT is based on ZBDD: Zero-Suppressed Binary Decision Diagram , which is a variant of BDD, and an adopted version of the DPLL algorithm. It has been implemented in C using the CUDD: Colorado University Decision Diagram package. The capability of ZBDDs in storing sets of subsets efficiently enabled us to store the clauses of a QBF very compactly and let us to embed the notion of memoization to the DPLL algorithm. These points led us to implement the search algorithm in such a way that we could store and reuse the results of all previously solved subformulas with a little overheads. ZQSAT can solve some sets of standard QBF benchmark problems (known to be hard for DPLL based algorithms) faster than the best existing solvers. In addition to prenex-CNF, ZQSAT accepts prenex-NNF formulas. We show and prove how this capability can be exponentially beneficial. N2 - In der Dissertation stellen wir einen neuen Algorithmus vor, welcher Formeln der quantifizierten Aussagenlogik (engl. Quantified Boolean formula, kurz QBF) löst. QBFs sind eine Erweiterung der klassischen Aussagenlogik um die Quantifizierung über aussagenlogische Variablen. Die quantifizierte Aussagenlogik ist dabei eine konservative Erweiterung der Aussagenlogik, d.h. es können nicht mehr Theoreme nachgewiesen werden als in der gewöhnlichen Aussagenlogik. Der Vorteil der Verwendung von QBFs ergibt sich durch die Möglichkeit, Sachverhalte kompakter zu repräsentieren. SAT (die Frage nach der Erfüllbarkeit einer Formel der Aussagenlogik) und QSAT (die Frage nach der Erfüllbarkeit einer QBF) sind zentrale Probleme in der Informatik mit einer Fülle von Anwendungen, wie zum Beispiel in der Graphentheorie, bei Planungsproblemen, nichtmonotonen Logiken oder bei der Verifikation. Insbesondere die Verifikation von Hard- und Software ist ein sehr aktuelles und wichtiges Forschungsgebiet in der Informatik. Unser Algorithmus zur Lösung von QBFs basiert auf sogenannten ZBDDs (engl. Zero-suppressed Binary decision Diagrams), welche eine Variante der BDDs (engl. Binary decision Diagrams) sind. BDDs sind eine kompakte Repräsentation von Formeln der Aussagenlogik. Der Algorithmus kombiniert nun bekannte Techniken zum Lösen von QBFs mit der ZBDD-Darstellung unter Verwendung geeigneter Heuristiken und Memoization. Memoization ermöglicht dabei das einfache Wiederverwenden bereits gelöster Teilprobleme. Der Algorithmus wurde unter Verwendung des CUDD-Paketes (Colorado University Decision Diagram) implementiert und unter dem Namen ZQSAT veröffentlicht. In Tests konnten wir nachweisen, dass ZQSAT konkurrenzfähig zu existierenden QBF-Beweisern ist, in einigen Fällen sogar bessere Resultate liefern kann. KW - Binäres Entscheidungsdiagramm KW - Erfüllbarkeitsproblem KW - DPLL KW - Zero-Suppressed Binary Decision Diagram (ZDD) KW - Formeln der quantifizierten Aussagenlogik KW - Erfüllbarkeit einer Formel der Aussagenlogik KW - ZQSA KW - DPLL KW - Zero-Suppressed Binary Decision Diagram (ZDD) KW - Quantified Boolean Formula (QBF) KW - Satisfiability KW - ZQSAT Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6378 ER - TY - THES A1 - Linckels, Serge T1 - An e-librarian service : supporting explorative learning by a description logics based semantic retrieval tool T1 - Ein E-Bibliothekar-Dienst : unterstütztes exploratives Lernen durch ein Beschreibungslogik basiertes, semantisches Retrievalwerkzeug N2 - Although educational content in electronic form is increasing dramatically, its usage in an educational environment is poor, mainly due to the fact that there is too much of (unreliable) redundant, and not relevant information. Finding appropriate answers is a rather difficult task being reliant on the user filtering of the pertinent information from the noise. Turning knowledge bases like the online tele-TASK archive into useful educational resources requires identifying correct, reliable, and "machine-understandable" information, as well as developing simple but efficient search tools with the ability to reason over this information. Our vision is to create an E-Librarian Service, which is able to retrieve multimedia resources from a knowledge base in a more efficient way than by browsing through an index, or by using a simple keyword search. In our E-Librarian Service, the user can enter his question in a very simple and human way; in natural language (NL). Our premise is that more pertinent results would be retrieved if the search engine understood the sense of the user's query. The returned results are then logical consequences of an inference rather than of keyword matchings. Our E-Librarian Service does not return the answer to the user's question, but it retrieves the most pertinent document(s), in which the user finds the answer to his/her question. Among all the documents that have some common information with the user query, our E-Librarian Service identifies the most pertinent match(es), keeping in mind that the user expects an exhaustive answer while preferring a concise answer with only little or no information overhead. Also, our E-Librarian Service always proposes a solution to the user, even if the system concludes that there is no exhaustive answer. Our E-Librarian Service was implemented prototypically in three different educational tools. A first prototype is CHESt (Computer History Expert System); it has a knowledge base with 300 multimedia clips that cover the main events in computer history. A second prototype is MatES (Mathematics Expert System); it has a knowledge base with 115 clips that cover the topic of fractions in mathematics for secondary school w.r.t. the official school programme. All clips were recorded mainly by pupils. The third and most advanced prototype is the "Lecture Butler's E-Librarain Service"; it has a Web service interface to respect a service oriented architecture (SOA), and was developed in the context of the Web-University project at the Hasso-Plattner-Institute (HPI). Two major experiments in an educational environment - at the Lycée Technique Esch/Alzette in Luxembourg - were made to test the pertinence and reliability of our E-Librarian Service as a complement to traditional courses. The first experiment (in 2005) was made with CHESt in different classes, and covered a single lesson. The second experiment (in 2006) covered a period of 6 weeks of intensive use of MatES in one class. There was no classical mathematics lesson where the teacher gave explanations, but the students had to learn in an autonomous and exploratory way. They had to ask questions to the E-Librarian Service just the way they would if there was a human teacher. N2 - Obwohl sich die Verfügbarkeit von pädagogischen Inhalten in elektronischer Form stetig erhöht, ist deren Nutzen in einem schulischen Umfeld recht gering. Die Hauptursache dessen ist, dass es zu viele unzuverlässige, redundante und nicht relevante Informationen gibt. Das Finden von passenden Lernobjekten ist eine schwierige Aufgabe, die vom benutzerbasierten Filtern der passenden Informationen abhängig ist. Damit Wissensbanken wie das online Tele-TASK Archiv zu nützlichen, pädagogischen Ressourcen werden, müssen Lernobjekte korrekt, zuverlässig und in maschinenverständlicher Form identifiziert werden, sowie effiziente Suchwerkzeuge entwickelt werden. Unser Ziel ist es, einen E-Bibliothekar-Dienst zu schaffen, der multimediale Ressourcen in einer Wissensbank auf effizientere Art und Weise findet als mittels Navigieren durch ein Inhaltsverzeichnis oder mithilfe einer einfachen Stichwortsuche. Unsere Prämisse ist, dass passendere Ergebnisse gefunden werden könnten, wenn die semantische Suchmaschine den Sinn der Benutzeranfrage verstehen würde. In diesem Fall wären die gelieferten Antworten logische Konsequenzen einer Inferenz und nicht die einer Schlüsselwortsuche. Tests haben gezeigt, dass unser E-Bibliothekar-Dienst unter allen Dokumenten in einer gegebenen Wissensbank diejenigen findet, die semantisch am besten zur Anfrage des Benutzers passen. Dabei gilt, dass der Benutzer eine vollständige und präzise Antwort erwartet, die keine oder nur wenige Zusatzinformationen enthält. Außerdem ist unser System in der Lage, dem Benutzer die Qualität und Pertinenz der gelieferten Antworten zu quantifizieren und zu veranschaulichen. Schlussendlich liefert unser E-Bibliothekar-Dienst dem Benutzer immer eine Antwort, selbst wenn das System feststellt, dass es keine vollständige Antwort auf die Frage gibt. Unser E-Bibliothekar-Dienst ermöglicht es dem Benutzer, seine Fragen in einer sehr einfachen und menschlichen Art und Weise auszudrücken, nämlich in natürlicher Sprache. Linguistische Informationen und ein gegebener Kontext in Form einer Ontologie werden für die semantische Übersetzung der Benutzereingabe in eine logische Form benutzt. Unser E-Bibliothekar-Dienst wurde prototypisch in drei unterschiedliche pädagogische Werkzeuge umgesetzt. In zwei Experimenten wurde in einem pädagogischen Umfeld die Angemessenheit und die Zuverlässigkeit dieser Werkzeuge als Komplement zum klassischen Unterricht geprüft. Die Hauptergebnisse sind folgende: Erstens wurde festgestellt, dass Schüler generell akzeptieren, ganze Fragen einzugeben - anstelle von Stichwörtern - wenn dies ihnen hilft, bessere Suchresultate zu erhalten. Zweitens, das wichtigste Resultat aus den Experimenten ist die Erkenntnis, dass Schuleresultate verbessert werden können, wenn Schüler unseren E-Bibliothekar-Dienst verwenden. Wir haben eine generelle Verbesserung von 5% der Schulresultate gemessen. 50% der Schüler haben ihre Schulnoten verbessert, 41% von ihnen sogar maßgeblich. Einer der Hauptgründe für diese positiven Resultate ist, dass die Schüler motivierter waren und folglich bereit waren, mehr Einsatz und Fleiß in das Lernen und in das Erwerben von neuem Wissen zu investieren. KW - Terminologische Logik KW - Deskriptive Logik KW - Semantische Suche KW - Ontologie KW - e-Learning KW - Semantik Web KW - Description Logics KW - Semantic Search KW - Ontologies KW - e-Learning KW - Semantic Web Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17452 ER - TY - THES A1 - Huang, Wanjun T1 - Temporary binding for dynamic middleware construction and web services composition T1 - Temporäre Anbindung für dynamischen Middlewareaufbau und Web Services Integration N2 - With increasing number of applications in Internet and mobile environments, distributed software systems are demanded to be more powerful and flexible, especially in terms of dynamism and security. This dissertation describes my work concerning three aspects: dynamic reconfiguration of component software, security control on middleware applications, and web services dynamic composition. Firstly, I proposed a technology named Routing Based Workflow (RBW) to model the execution and management of collaborative components and realize temporary binding for component instances. The temporary binding means component instances are temporarily loaded into a created execution environment to execute their functions, and then are released to their repository after executions. The temporary binding allows to create an idle execution environment for all collaborative components, on which the change operations can be immediately carried out. The changes on execution environment will result in a new collaboration of all involved components, and also greatly simplifies the classical issues arising from dynamic changes, such as consistency preserving etc. To demonstrate the feasibility of RBW, I created a dynamic secure middleware system - the Smart Data Server Version 3.0 (SDS3). In SDS3, an open source implementation of CORBA is adopted and modified as the communication infrastructure, and three secure components managed by RBW, are created to enhance the security on the access of deployed applications. SDS3 offers multi-level security control on its applications from strategy control to application-specific detail control. For the management by RBW, the strategy control of SDS3 applications could be dynamically changed by reorganizing the collaboration of the three secure components. In addition, I created the Dynamic Services Composer (DSC) based on Apache open source projects, Apache Axis and WSIF. In DSC, RBW is employed to model the interaction and collaboration of web services and to enable the dynamic changes on the flow structure of web services. Finally, overall performance tests were made to evaluate the efficiency of the developed RBW and SDS3. The results demonstrated that temporary binding of component instances makes slight impacts on the execution efficiency of components, and the blackout time arising from dynamic changes can be extremely reduced in any applications. N2 - Heutige Softwareanwendungen fuer das Internet und den mobilen Einsatz erfordern bezueglich Funktionalitaet und Sicherheit immer leistungsstaerkere verteilte Softwaresysteme. Diese Dissertation befasst sich mit der dynamischen Rekonfiguration von Komponentensoftware, Sicherheitskontrolle von Middlewareanwendungen und der dynamischen Komposition von Web Services. Zuerst wird eine Routing Based Workflow (RBW) Technologie vorgestellt, welche die Ausfuehrung und das Management von kollaborierenden Komponenten modelliert, sowie fuer die Realisierung einer temporaeren Anbindung von Komponenteninstanzen zustaendig ist. D.h., Komponenteninstanzen werden zur Ausfuehrung ihrer Funktionalitaet temporaer in eine geschaffene Ausfuehrungsumgebung geladen und nach Beendigung wieder freigegeben. Die temporaere Anbindung erlaubt das Erstellen einer Ausfuehrungsumgebung, in der Rekonfigurationen unmittelbar vollzogen werden koennen. Aenderungen der Ausfuehrungsumgebung haben neue Kollaborations-Beziehungen der Komponenten zufolge und vereinfachen stark die Schwierigkeiten wie z.B. Konsistenzerhaltung, die mit dynamischen Aenderungen verbunden sind. Um die Durchfuehrbarkeit von RBW zu demonstrieren, wurde ein dynamisches, sicheres Middleware System erstellt - der Smart Data Server, Version 3 (SDS3). Bei SDS3 kommt eine Open Source Softwareimplementierung von CORBA zum Einsatz, die modifiziert als Kommunikationsinfrasturkutur genutzt wird. Zudem wurden drei Sicherheitskomponenten erstellt, die von RBW verwaltet werden und die Sicherheit beim Zugriff auf die eingesetzten Anwendungen erhoehen. SDS3 bietet den Anwendungen Sicherheitskontrollfunktionen auf verschiedenen Ebenen, angefangen von einer Strategiekontrolle bis zu anwendungsspezifischen Kontrollfunktionen. Mittels RBW kann die Strategiekontrolle des SDS3 dynamisch durch Reorganisation von Kollabortions-Beziehungen zwischen den Sicherheitskomponenten angepasst werden. Neben diesem System wurde der Dynamic Service Composer (DSC) implementiert, welcher auf den Apache Open Source Projekten Apache Axis und WSIF basiert. Im DSC wird RBW eingesetzt, um die Interaktion und Zusammenarbeit von Web Services zu modellieren sowie dynamische Aenderungen der Flussstruktur von Web Services zu ermoeglichen. Nach der Implementierung wurden Performance-Tests bezueglich RBW und SDS3 durchgefuehrt. Die Ergebnisse der Tests zeigen, dass eine temporaere Anbindung von Komponenteninstanzen nur einen geringen Einfluss auf die Ausfuehrungseffizienz von Komponeten hat. Ausserdem bestaetigen die Testergebnisse, dass die mit der dynamischen Rekonfiguration verbundene Ausfallzeit extrem niedrig ist. KW - Middleware KW - Web Services KW - Temporäre Anbindung KW - Dynamische Rekonfiguration KW - temporary binding KW - dynamic reconfiguration Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7672 ER - TY - CHAP A1 - Dennert-Möller, Elisabeth A1 - Garmann, Robert A1 - Kujath, Bertold A1 - Zscheyge, Oliver A1 - Weicker, Karsten A1 - Böhne, Sebastian A1 - Knobelsdorf, Maria A1 - Kreitz, Christoph A1 - Steen, Alexander A1 - Wisniewski, Max A1 - Benzmüller, Christoph A1 - Gebhardt, Kai A1 - Ehlenz, Matthias A1 - Bergner, Nadine A1 - Schroeder, Ulrik ED - Schwill, Andreas ED - Lucke, Ulrike T1 - Hochschuldidaktik der Informatik BT - HDI2016 – 7. Fachtagung des GI-Fachbereichs Informatik und Ausbildung / Didaktik der Informatik ; 13.-14. September 2016 an der Universität Potsdam N2 - Die 7. Fachtagung für Hochschuldidaktik, die 2016 erneut mit der DeLFI E-Learning Fachtagung Informatik stattfand, setzte das erfolgreiche Modell einer Tagung fort, die sich mit hochschuldidaktischen Fragen und der Gestaltung von Studiengängen der Informatik beschäftigt. Thema der Tagung waren alle Fragen, die sich der Vermittlung von Informatikgegenständen im Hochschulbereich widmen. Dazu gehörten u.a.: • fachdidaktische Konzepte der Vermittlung einzelner Informatikgegenstände • methodische Lösungen, wie spezielle Lehr- und Lernformen, Durchführungskonzepte • empirische Ergebnisse und Vergleichsstudien • E-Learning-Ansätze, wenn sie ein erkennbares didaktisches Konzept verfolgen • Studienkonzepte und Curricula, organisatorische Fragen, wie Gewinnung von Studierenden, Studieneingangsphase, Abbrecher. Die Fachtagung widmete sich ausgewählten Fragestellungen dieses Themenkomplexes, die durch Vorträge ausgewiesener Experten, durch eingereichte Beiträge und durch Präsentationen und Poster intensiv behandelt wurden. Unser besonderer Dank gilt dem Programmkomitee und den hier nicht genannten Helfern für ihren Einsatz bei der Vorbereitung und Durchführung der Tagung. T3 - Commentarii informaticae didacticae (CID) - 10 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-93511 SN - 978-3-86956-376-3 SN - 1868-0844 SN - 2191-1940 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Menzel, Michael T1 - Model-driven security in service-oriented architectures : leveraging security patterns to transform high-level security requirements to technical policies T1 - Modell-getriebene Sicherheit in Service-orientierten Architekturen N2 - Service-oriented Architectures (SOA) facilitate the provision and orchestration of business services to enable a faster adoption to changing business demands. Web Services provide a technical foundation to implement this paradigm on the basis of XML-messaging. However, the enhanced flexibility of message-based systems comes along with new threats and risks. To face these issues, a variety of security mechanisms and approaches is supported by the Web Service specifications. The usage of these security mechanisms and protocols is configured by stating security requirements in security policies. However, security policy languages for SOA are complex and difficult to create due to the expressiveness of these languages. To facilitate and simplify the creation of security policies, this thesis presents a model-driven approach that enables the generation of complex security policies on the basis of simple security intentions. SOA architects can specify these intentions in system design models and are not required to deal with complex technical security concepts. The approach introduced in this thesis enables the enhancement of any system design modelling languages – for example FMC or BPMN – with security modelling elements. The syntax, semantics, and notion of these elements is defined by our security modelling language SecureSOA. The metamodel of this language provides extension points to enable the integration into system design modelling languages. In particular, this thesis demonstrates the enhancement of FMC block diagrams with SecureSOA. To enable the model-driven generation of security policies, a domain-independent policy model is introduced in this thesis. This model provides an abstraction layer for security policies. Mappings are used to perform the transformation from our model to security policy languages. However, expert knowledge is required to generate instances of this model on the basis of simple security intentions. Appropriate security mechanisms, protocols and options must be chosen and combined to fulfil these security intentions. In this thesis, a formalised system of security patterns is used to represent this knowledge and to enable an automated transformation process. Moreover, a domain-specific language is introduced to state security patterns in an accessible way. On the basis of this language, a system of security configuration patterns is provided to transform security intentions related to data protection and identity management. The formal semantics of the security pattern language enable the verification of the transformation process introduced in this thesis and prove the correctness of the pattern application. Finally, our SOA Security LAB is presented that demonstrates the application of our model-driven approach to facilitate a dynamic creation, configuration, and execution of secure Web Service-based composed applications. N2 - Im Bereich der Enterprisearchitekturen hat das Paradigma der Service-orientierten Architektur (SOA) in den vergangenen Jahren eine große Bedeutung erlangt. Dieser Ansatz ermöglicht die Strukturierung und Umsetzung verteilter, IT-basierter Geschäftsfunktionen, um einen effizienten und flexiblen Einsatz von IT-Ressourcen zu ermöglichen. Während in der Vergangenheit fachliche Anforderungen in monolithischen Applikationen umgesetzt wurden, setzt dieser Architekturansatz auf wiederverwendbare Dienste, die spezifische Geschäftsfunktionen implementieren. Diese Dienste können dann dynamisch zur Umsetzung von Geschäftsprozessen herangezogen werden und ermöglichen eine schnelle Reaktion auf verändernde geschäftliche Rahmenbedingungen durch Anpassung der Prozesse. Die einzelnen Dienste existieren unabhängig voneinander und sind lose über einen Nachrichtenaustausch gekoppelt. Diese Unabhängigkeit unterscheidet den SOA-Ansatz von der bisherigen Entwicklung klassischer verteilter Anwendungen. Die Verwendung unabhängiger Dienste geht aber auch mit einem größeren Gefährdungspotential einher, da eine Vielzahl von Schnittstellen bereitgestellt wird, die mittels komplexer Protokolle angesprochen werden können. Somit ist die korrekte Umsetzung von Sicherheitsmechanismen in allen Diensten und SOA-Infrastrukturkomponeten essentiell. Kommunikationspartner müssen an jedem Kommunikationsendpunkt authentifiziert und autorisiert werden und ausgetauschte Nachrichten müssen immer geschützt werden. Solche Sicherheitsanforderungen werden in technischen Sicherheitskonfigurationen (Policydokumenten) mittels einer Policysprache kodiert und werden an die Dienste verteilt, die diese Anforderungen durchsetzen. Da Policysprachen für SOA aber durch die Vielzahl und Vielfalt an Sicherheitsmechanismen, -protokollen und -standards eine hohe Komplexität aufweisen, sind Sicherheitskonfigurationen höchst fehleranfällig und mit viel Fachwissen zu erstellen. Um die Generierung von Sicherheitskonfigurationen in komplexen Systemen zu vereinfachen, wird in dieser Arbeit ein modellgetriebener Ansatz vorgestellt, der eine visuelle Modellierung von Sicherheitsanforderungen in Architekturmodellen ermöglicht und eine automatisierte Generierung von Sicherheitskonfigurationen auf Basis dieser Anforderungen unterstützt. Die Modellierungsebene ermöglicht eine einfache und abstrakte Darstellung von Sicherheitsanforderungen, die sich auch für Systemarchitekten erschließen, welche keine Sicherheits-experten sind. Beispielsweise können modellierte Daten einfach mit einem Schloss annotiert werden, um den Schutz dieser Daten zu fordern. Die Syntax, die Semantik und die Darstellung dieser Anforderungen werden durch die in dieser Arbeit vorgestellte Sicherheitsmodellierungssprache SecureSOA spezifiziert. Der vorgestellte modellgetriebene Ansatz transformiert die modellierten Anforderungen auf ein domänen-unabhängiges Policymodell, das eine Abstraktionsschicht zu konkreten Policysprachen bildet. Diese Abstrak-tionsschicht vereinfacht die Generierung von Sicherheitspolicies in verschiedenen Policysprachen. Allerdings kann diese Transformation nur erfolgen, wenn im System Expertenwissen hinterlegt ist, das die Auswahl von konkreten Sicherheitsmechanismen und -optionen bestimmt. Im Rahmen dieser Arbeit werden Entwurfsmuster für SOA-Sicherheit zur Transformation herangezogen, die dieses Wissen repräsentieren. Dazu wird ein Katalog von Entwurfsmustern eingeführt, der die Abbildung von abstrakten Sicherheitsanforderungen auf konkrete Konfigurationen ermöglicht. Diese Muster sind mittels einer Entwurfsmustersprache definiert, die in dieser Arbeit eingeführt wird. Die formale Semantik dieser Sprache ermöglicht die formale Verifikation des Transformationsprozesses, um die Korrektheit der Entwurfsmusteranwendung nachzuweisen. Die Definition dieses Entwurfsmusterkatalogs und der darauf basierende Transformationsprozess ermöglichen die Abbildung von abstrakten Sicherheitsanforderungen auf konkrete technische Sicherheitskonfigurationen und stellen den Beitrag dieser Arbeit dar. Abschließend wird in dieser Arbeit das SOA-Security-Lab vorgestellt, das die Umsetzung dieses Ansatzes demonstriert. KW - IT-Sicherheit KW - Service-Orientierte Architekturen KW - Modell-getriebene Sicherheit KW - Sicherheitsmodellierung KW - Entwurfsmuster für SOA-Sicherheit KW - IT-Security KW - Service-oriented Architectures KW - Modell-driven Security KW - Security Modelling KW - SOA Security Pattern Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59058 ER - TY - GEN A1 - Klieme, Eric A1 - Tietz, Christian A1 - Meinel, Christoph T1 - Beware of SMOMBIES BT - Verification of Users based on Activities while Walking T2 - The 17th IEEE International Conference on Trust, Security and Privacy in Computing and Communications (IEEE TrustCom 2018)/the 12th IEEE International Conference on Big Data Science and Engineering (IEEE BigDataSE 2018) N2 - Several research evaluated the user's style of walking for the verification of a claimed identity and showed high authentication accuracies in many settings. In this paper we present a system that successfully verifies a user's identity based on many real world smartphone placements and yet not regarded interactions while walking. Our contribution is the distinction of all considered activities into three distinct subsets and a specific one-class Support Vector Machine per subset. Using sensor data of 30 participants collected in a semi-supervised study approach, we prove that unsupervised verification is possible with very low false-acceptance and false-rejection rates. We furthermore show that these subsets can be distinguished with a high accuracy and demonstrate that this system can be deployed on off-the-shelf smartphones. KW - gait KW - authentication KW - smartphone KW - activities KW - verification KW - behavioral KW - continuous Y1 - 2018 SN - 978-1-5386-4387-7 SN - 978-1-5386-4389-1 U6 - https://doi.org/10.1109/TrustCom/BigDataSE.2018.00096 SN - 2324-9013 SP - 651 EP - 660 PB - IEEE CY - New York ER - TY - JOUR A1 - Thienen, Julia von A1 - Noweski, Christine A1 - Meinel, Christoph A1 - Lang, Sabine A1 - Nicolai, Claudia A1 - Bartz, Andreas T1 - What can design thinking learn from behavior group theraphy? Y1 - 2012 SN - 978-3-642-31990-7 ER - TY - GEN A1 - Meinel, Christoph A1 - Sack, Harald T1 - WWW : Kommunikation, Internetworking, Web-Technologien Y1 - 2004 SN - 3-540-44276-6 SN - 1439-5428 PB - Springer CY - Berlin ER - TY - BOOK A1 - Meinel, Christoph A1 - Sack, Harald T1 - Digitale Kommunikation : Vernetzen, Multimedia, Sicherheit T3 - Media Press Y1 - 2009 SN - 978-3-540-92922-2 U6 - https://doi.org/10.1007/978-3-540-92923-9 SN - 1439-3107 PB - Springer-Verlag Berlin Heidelberg CY - Berlin, Heidelberg ER - TY - GEN A1 - Alhosseini Almodarresi Yasin, Seyed Ali A1 - Bin Tareaf, Raad A1 - Najafi, Pejman A1 - Meinel, Christoph T1 - Detect me if you can BT - Spam Bot Detection Using Inductive Representation Learning T2 - Companion Proceedings of The 2019 World Wide Web Conference N2 - Spam Bots have become a threat to online social networks with their malicious behavior, posting misinformation messages and influencing online platforms to fulfill their motives. As spam bots have become more advanced over time, creating algorithms to identify bots remains an open challenge. Learning low-dimensional embeddings for nodes in graph structured data has proven to be useful in various domains. In this paper, we propose a model based on graph convolutional neural networks (GCNN) for spam bot detection. Our hypothesis is that to better detect spam bots, in addition to defining a features set, the social graph must also be taken into consideration. GCNNs are able to leverage both the features of a node and aggregate the features of a node’s neighborhood. We compare our approach, with two methods that work solely on a features set and on the structure of the graph. To our knowledge, this work is the first attempt of using graph convolutional neural networks in spam bot detection. KW - Social Media Analysis KW - Bot Detection KW - Graph Embedding KW - Graph Convolutional Neural Networks Y1 - 2019 SN - 978-1-4503-6675-5 U6 - https://doi.org/10.1145/3308560.3316504 SP - 148 EP - 153 PB - Association for Computing Machinery CY - New York ER - TY - JOUR A1 - Lindberg, Tilmann A1 - Meinel, Christoph A1 - Wagner, Ralf T1 - Design thinking : a fruitful concept for IT development? Y1 - 2011 SN - 978-3-642-13756-3 ER - TY - JOUR A1 - Meinel, Christoph A1 - Klotz, Volker T1 - The first 10 years of the ECCC digital library Y1 - 2006 UR - http://portal.acm.org/cacm U6 - https://doi.org/10.1145/1107458.1107484 ER - TY - JOUR A1 - Grünewald, Franka A1 - Meinel, Christoph T1 - Implementation and Evaluation of Digital E-Lecture Annotation in Learning Groups to Foster Active Learning JF - IEEE transactions on learning technologies N2 - The use of video lectures in distance learning involves the two major problems of searchability and active user participation. In this paper, we promote the implementation and usage of a collaborative educational video annotation functionality to overcome these two challenges. Different use cases and requirements, as well as details of the implementation, are explained. Furthermore, we suggest more improvements to foster a culture of participation and an algorithm for the extraction of semantic data. Finally, evaluations in the form of user tests and questionnaires in a MOOC setting are presented. The results of the evaluation are promising, as they indicate not only that students perceive it as useful, but also that the learning effectiveness increases. The combination of personal lecture video annotations with a semantic topic map was also evaluated positively and will thus be investigated further, as will the implementation in a MOOC context. KW - eLectures KW - tele-teaching KW - video annotation KW - collaborative learning Y1 - 2015 U6 - https://doi.org/10.1109/TLT.2015.2396042 SN - 1939-1382 VL - 8 IS - 3 SP - 286 EP - 298 PB - Inst. of Electr. and Electronics Engineers CY - Los Alamitos ER - TY - THES A1 - Schnjakin, Maxim T1 - Cloud-RAID BT - eine Methode zur Bereitstellung zuverlässiger Speicherressourcen in öffentlichen Clouds Y1 - 2014 ER - TY - THES A1 - Saleh, Eyad T1 - Securing Multi-tenant SaaS Environments N2 - Software-as-a-Service (SaaS) offers several advantages to both service providers and users. Service providers can benefit from the reduction of Total Cost of Ownership (TCO), better scalability, and better resource utilization. On the other hand, users can use the service anywhere and anytime, and minimize upfront investment by following the pay-as-you-go model. Despite the benefits of SaaS, users still have concerns about the security and privacy of their data. Due to the nature of SaaS and the Cloud in general, the data and the computation are beyond the users' control, and hence data security becomes a vital factor in this new paradigm. Furthermore, in multi-tenant SaaS applications, the tenants become more concerned about the confidentiality of their data since several tenants are co-located onto a shared infrastructure. To address those concerns, we start protecting the data from the provisioning process by controlling how tenants are being placed in the infrastructure. We present a resource allocation algorithm designed to minimize the risk of co-resident tenants called SecPlace. It enables the SaaS provider to control the resource (i.e., database instance) allocation process while taking into account the security of tenants as a requirement. Due to the design principles of the multi-tenancy model, tenants follow some degree of sharing on both application and infrastructure levels. Thus, strong security-isolation should be present. Therefore, we develop SignedQuery, a technique that prevents one tenant from accessing others' data. We use the Signing Concept to create a signature that is used to sign the tenant's request, then the server can verifies the signature and recognizes the requesting tenant, and hence ensures that the data to be accessed is belonging to the legitimate tenant. Finally, Data confidentiality remains a critical concern due to the fact that data in the Cloud is out of users' premises, and hence beyond their control. Cryptography is increasingly proposed as a potential approach to address such a challenge. Therefore, we present SecureDB, a system designed to run SQL-based applications over an encrypted database. SecureDB captures the schema design and analyzes it to understand the internal structure of the data (i.e., relationships between the tables and their attributes). Moreover, we determine the appropriate partialhomomorphic encryption scheme for each attribute where computation is possible even when the data is encrypted. To evaluate our work, we conduct extensive experiments with di↵erent settings. The main use case in our work is a popular open source HRM application, called OrangeHRM. The results show that our multi-layered approach is practical, provides enhanced security and isolation among tenants, and have a moderate complexity in terms of processing encrypted data. Y1 - 2016 ER - TY - JOUR A1 - Meinel, Christoph A1 - Wang, Long T1 - Building content clusters based on modelling page pairs N2 - We give a new view on building content clusters from page pair models. We measure the heuristic importance within every two pages by computing the distance of their accessed positions in usage sessions. We also compare our page pair models with the classical pair models used in information theories and natural language processing, and give different evaluation methods to build the reasonable content communities. And we finally interpret the advantages and disadvantages of our models from detailed experiment results Y1 - 2006 UR - http://www.springerlink.com/content/105633/ U6 - https://doi.org/10.1007/11610113_85 ER - TY - THES A1 - Sadr-Azodi, Amir Shahab T1 - Towards Real-time SIEM-based Network monitoring and Intrusion Detection through Advanced Event Normalization Y1 - 2015 ER - TY - THES A1 - Gericke, Lutz T1 - Tele-Board - Supporting and analyzing creative collaboration in synchronous and asynchronous scenario Y1 - 2014 ER - TY - JOUR A1 - Jobst, Birgit A1 - Köppen, Eva A1 - Lindberg, Tilmann A1 - Moritz, Josephine A1 - Rhinow, Holger A1 - Meinel, Christoph T1 - The faith-factor in design thinking : creative confidence through education at the design thinking schools Potsdam and Standford? Y1 - 2012 SN - 978-3-642-31990-7 ER - TY - JOUR A1 - Noweski, Christine A1 - Scheer, Andrea A1 - Büttner, Nadja A1 - Thienen, Julia von A1 - Erdmann, Johannes A1 - Meinel, Christoph T1 - Towards a paradigm shift in education practice : developing twenty-first century skills with design thinking Y1 - 2012 SN - 978-3-642-31990-7 ER - TY - JOUR A1 - Gumienny, Raja A1 - Gericke, Lutz A1 - Wenzel, Matthias A1 - Meinel, Christoph T1 - Tele-board in use : applying aq digital whiteboard system in different situations and setups Y1 - 2012 SN - 978-3-642-31990-7 ER - TY - JOUR A1 - Thienen, Julia von A1 - Noweski, Christine A1 - Rauth, Ingo A1 - Meinel, Christoph A1 - Lange, Sabine T1 - If you want to know who are, tell me where you are : the importance of places Y1 - 2012 ER - TY - JOUR A1 - Meinel, Christoph A1 - Leifer, Larry T1 - Design thinking research Y1 - 2012 SN - 978-3-642-31990-7 ER - TY - BOOK A1 - Linckels, Serge A1 - Meinel, Christoph T1 - E-Librarian service : user-friendly semantic search in digital libraries Y1 - 2011 SN - 978-3-642-17742-2 U6 - https://doi.org/10.1007/978-3-642-17743-9 PB - Springer-Verlag Berlin Heidelberg CY - Berlin, Heidelberg ER - TY - JOUR A1 - Meinel, Christoph A1 - Leifer, Larry T1 - Design thinking research Y1 - 2011 SN - 978-3-642-13756-3 ER - TY - GEN ED - Plattner, Hasso ED - Meinel, Christoph ED - Leifer, Larry T1 - Design thinking : understand - improve - apply Y1 - 2011 SN - 978-3-642-13756-3 PB - Springer-Verlag Berlin Heidelberg CY - Berlin, Heidelberg ER - TY - JOUR A1 - Gumienny, Raja A1 - Meinel, Christoph A1 - Gericke, Lutz A1 - Quasthoff, Matthias A1 - LoBue, Peter A1 - Willems, Christian T1 - Tele-board : enabling efficient collaboration in digital design spaces across time and distance Y1 - 2011 SN - 978-3-642-13756-3 ER - TY - JOUR A1 - Thienen, Julia von A1 - Noweski, Christine A1 - Meinel, Christoph A1 - Rauth, Ingo T1 - The co-evolution of theory and practice in design thinking - or - "Mind the oddness trap!" Y1 - 2011 SN - 978-3-642-13756-3 ER - TY - JOUR A1 - Lindberg, Tilmann A1 - Köppen, Eva A1 - Rauth, Ingo A1 - Meinel, Christoph T1 - On the perection, adoption and Implementation of design thinking in the IT industry Y1 - 2012 ER - TY - JOUR A1 - Gericke, Lutz A1 - Gumienny, Raja A1 - Meinel, Christoph T1 - Tele-board : folow the traces of your design process history Y1 - 2012 ER - TY - JOUR A1 - Meinel, Christoph A1 - Leifer, Larry T1 - Design thinking research Y1 - 2012 ER - TY - BOOK ED - Plattner, Hasso ED - Meinel, Christoph ED - Leifer, Larry T1 - Dsign thinking research : studying co-creation in practice Y1 - 2012 SN - 978-3-642-21642-8 U6 - https://doi.org/10.1007/978-3-642-21643-5 PB - Springer Berlin Heidelberg CY - Berlin, Heidelberg ER - TY - THES A1 - Al-Saffar, Loay Talib Ahmed T1 - Analysing prerequisites, expectations, apprehensions, and attitudes of university students studying Computer science T1 - Analyse von Voraussetzungen, Erwartungen, Haltungen, Einstellungen und Befürchtungen von Bachelor-Studierenden der Informatik N2 - The main objective of this dissertation is to analyse prerequisites, expectations, apprehensions, and attitudes of students studying computer science, who are willing to gain a bachelor degree. The research will also investigate in the students’ learning style according to the Felder-Silverman model. These investigations fall in the attempt to make an impact on reducing the “dropout”/shrinkage rate among students, and to suggest a better learning environment. The first investigation starts with a survey that has been made at the computer science department at the University of Baghdad to investigate the attitudes of computer science students in an environment dominated by women, showing the differences in attitudes between male and female students in different study years. Students are accepted to university studies via a centrally controlled admission procedure depending mainly on their final score at school. This leads to a high percentage of students studying subjects they do not want. Our analysis shows that 75% of the female students do not regret studying computer science although it was not their first choice. And according to statistics over previous years, women manage to succeed in their study and often graduate on top of their class. We finish with a comparison of attitudes between the freshman students of two different cultures and two different university enrolment procedures (University of Baghdad, in Iraq, and the University of Potsdam, in Germany) both with opposite gender majority. The second step of investigation took place at the department of computer science at the University of Potsdam in Germany and analyzes the learning styles of students studying the three major fields of study offered by the department (computer science, business informatics, and computer science teaching). Investigating the differences in learning styles between the students of those study fields who usually take some joint courses is important to be aware of which changes are necessary to be adopted in the teaching methods to address those different students. It was a two stage study using two questionnaires; the main one is based on the Index of Learning Styles Questionnaire of B. A. Solomon and R. M. Felder, and the second questionnaire was an investigation on the students’ attitudes towards the findings of their personal first questionnaire. Our analysis shows differences in the preferences of learning style between male and female students of the different study fields, as well as differences between students with the different specialties (computer science, business informatics, and computer science teaching). The third investigation looks closely into the difficulties, issues, apprehensions and expectations of freshman students studying computer science. The study took place at the computer science department at the University of Potsdam with a volunteer sample of students. The goal is to determine and discuss the difficulties and issues that they are facing in their study that may lead them to think in dropping-out, changing the study field, or changing the university. The research continued with the same sample of students (with business informatics students being the majority) through more than three semesters. Difficulties and issues during the study were documented, as well as students’ attitudes, apprehensions, and expectations. Some of the professors and lecturers opinions and solutions to some students’ problems were also documented. Many participants had apprehensions and difficulties, especially towards informatics subjects. Some business informatics participants began to think of changing the university, in particular when they reached their third semester, others thought about changing their field of study. Till the end of this research, most of the participants continued in their studies (the study they have started with or the new study they have changed to) without leaving the higher education system. N2 - Thema der Dissertation ist die Untersuchung von Voraussetzungen, Erwartungen, Haltungen, Einstellungen und Befürchtungen von Bachelor Studierenden der Informatik. Darüber hinaus werden in der vorliegenden Analyse anhand des Solomon/Felder-Modells Lerntypen unter den Informatik-Studierenden untersucht mit dem Ziel, mittels einer vorteilhafter gestalteten Lernumgebung zur Lernwirksamkeit und zur Reduktion der Abbrecherquote beizutragen. Zunächst werden anhand einer Vergleichsstudie zwischen Informatik-Studierenden an der Universität Bagdad und an der Universität Potsdam sowie jeweils zwischen männlichen und weiblichen Studierenden Unterschiede in der Wahrnehmung des Fachs herausgearbeitet. Hierzu trägt insbesondere das irakische Studienplatzvergabeverfahren bei, das den Studierenden nur wenig Freiheiten lässt, ein Studienfach zu wählen mit dem Ergebnis, dass viele Studierende, darunter überwiegend weibliche Studierende, gegen ihre Absicht Informatik studieren. Dennoch arrangieren sich auch die weiblichen Studierenden mit dem Fach und beenden das Studium oft mit Best-Noten. Der zweite Teil der Dissertation analysiert Lernstile von Studierenden des Instituts für Informatik der Universität Potsdam auf der Grundlage des Modells von Solomon/Felder mit dem Ziel, Hinweise für eine verbesserte Gestaltung der Lehrveranstaltungen zu gewinnen, die Lernende in der für sie geeigneten Form anspricht. Die Ergebnisse zeigen die Schwierigkeit, dieses Ziel zu erreichen, denn sowohl männliche und weibliche Studierende als auch Studierende von Informatik, Wirtschaftsinformatik und Lehramt Informatik weisen deutliche Unterschiede in den präferierten Lernstilen auf. In einer dritten qualitativen Studie wurden mit Studierenden von Informatik, Wirtschaftsinformatik und Lehramt Informatik Interviews über einen Zeitraum der ersten drei Studiensemester geführt, um einen detaillierten Einblick in Haltungen, Einstellungen und Erwartungen zum Studium zu gewinnen sowie Probleme zu ermitteln, die möglicherweise zum Abbruch des Studiums oder zum Wechsel des Fachs oder der Universität führen können. KW - computer science education KW - dropout KW - changing the university KW - changing the study field KW - Computer Science KW - business informatics KW - study problems KW - tutorial section KW - higher education KW - teachers KW - professors KW - Informatikvoraussetzungen KW - Studentenerwartungen KW - Studentenhaltungen KW - Universitätseinstellungen KW - Bachelorstudierende der Informatik KW - Abbrecherquote KW - Wirtschaftsinformatik KW - Informatik KW - Universität Potsdam KW - Universität Bagdad KW - Probleme in der Studie KW - Lehrer KW - Professoren KW - Theoretischen Vorlesungen KW - Programmierung KW - Anleitung KW - Hochschulsystem KW - Informatik-Studiengänge KW - Didaktik der Informatik Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98437 ER - TY - JOUR A1 - Bröker, Kathrin ED - Schubert, Sigrid ED - Schwill, Andreas T1 - Unterstützung Informatik-Studierender durch ein Lernzentrum JF - HDI 2014 : Gestalten von Übergängen N2 - In diesem Papier wird das Konzept eines Lernzentrums für die Informatik (LZI) an der Universität Paderborn vorgestellt. Ausgehend von den fachspezifischen Schwierigkeiten der Informatik Studierenden werden die Angebote des LZIs erläutert, die sich über die vier Bereiche Individuelle Beratung und Betreuung, „Offener Lernraum“, Workshops und Lehrveranstaltungen sowie Forschung erstrecken. Eine erste Evaluation mittels Feedbackbögen zeigt, dass das Angebot bei den Studierenden positiv aufgenommen wird. Zukünftig soll das Angebot des LZIs weiter ausgebaut und verbessert werden. Ausgangsbasis dazu sind weitere Studien. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-84754 VL - 2015 IS - 9 SP - 189 EP - 197 ER - TY - THES A1 - Prasse, Paul T1 - Pattern recognition for computer security T1 - Mustererkennung für Computersicherheit BT - discriminative models for email spam campaign and malware detection BT - diskriminative Modelle zur Erkennung von Email Spam-Kampagnen und Malware N2 - Computer Security deals with the detection and mitigation of threats to computer networks, data, and computing hardware. This thesis addresses the following two computer security problems: email spam campaign and malware detection. Email spam campaigns can easily be generated using popular dissemination tools by specifying simple grammars that serve as message templates. A grammar is disseminated to nodes of a bot net, the nodes create messages by instantiating the grammar at random. Email spam campaigns can encompass huge data volumes and therefore pose a threat to the stability of the infrastructure of email service providers that have to store them. Malware -software that serves a malicious purpose- is affecting web servers, client computers via active content, and client computers through executable files. Without the help of malware detection systems it would be easy for malware creators to collect sensitive information or to infiltrate computers. The detection of threats -such as email-spam messages, phishing messages, or malware- is an adversarial and therefore intrinsically difficult problem. Threats vary greatly and evolve over time. The detection of threats based on manually-designed rules is therefore difficult and requires a constant engineering effort. Machine-learning is a research area that revolves around the analysis of data and the discovery of patterns that describe aspects of the data. Discriminative learning methods extract prediction models from data that are optimized to predict a target attribute as accurately as possible. Machine-learning methods hold the promise of automatically identifying patterns that robustly and accurately detect threats. This thesis focuses on the design and analysis of discriminative learning methods for the two computer-security problems under investigation: email-campaign and malware detection. The first part of this thesis addresses email-campaign detection. We focus on regular expressions as a syntactic framework, because regular expressions are intuitively comprehensible by security engineers and administrators, and they can be applied as a detection mechanism in an extremely efficient manner. In this setting, a prediction model is provided with exemplary messages from an email-spam campaign. The prediction model has to generate a regular expression that reveals the syntactic pattern that underlies the entire campaign, and that a security engineers finds comprehensible and feels confident enough to use the expression to blacklist further messages at the email server. We model this problem as two-stage learning problem with structured input and output spaces which can be solved using standard cutting plane methods. Therefore we develop an appropriate loss function, and derive a decoder for the resulting optimization problem. The second part of this thesis deals with the problem of predicting whether a given JavaScript or PHP file is malicious or benign. Recent malware analysis techniques use static or dynamic features, or both. In fully dynamic analysis, the software or script is executed and observed for malicious behavior in a sandbox environment. By contrast, static analysis is based on features that can be extracted directly from the program file. In order to bypass static detection mechanisms, code obfuscation techniques are used to spread a malicious program file in many different syntactic variants. Deobfuscating the code before applying a static classifier can be subjected to mostly static code analysis and can overcome the problem of obfuscated malicious code, but on the other hand increases the computational costs of malware detection by an order of magnitude. In this thesis we present a cascaded architecture in which a classifier first performs a static analysis of the original code and -based on the outcome of this first classification step- the code may be deobfuscated and classified again. We explore several types of features including token $n$-grams, orthogonal sparse bigrams, subroutine-hashings, and syntax-tree features and study the robustness of detection methods and feature types against the evolution of malware over time. The developed tool scans very large file collections quickly and accurately. Each model is evaluated on real-world data and compared to reference methods. Our approach of inferring regular expressions to filter emails belonging to an email spam campaigns leads to models with a high true-positive rate at a very low false-positive rate that is an order of magnitude lower than that of a commercial content-based filter. Our presented system -REx-SVMshort- is being used by a commercial email service provider and complements content-based and IP-address based filtering. Our cascaded malware detection system is evaluated on a high-quality data set of almost 400,000 conspicuous PHP files and a collection of more than 1,00,000 JavaScript files. From our case study we can conclude that our system can quickly and accurately process large data collections at a low false-positive rate. N2 - Computer-Sicherheit beschäftigt sich mit der Erkennung und der Abwehr von Bedrohungen für Computer-Netze, Daten und Computer-Hardware. In dieser Dissertation wird die Leistungsfähigkeit von Modellen des maschinellen Lernens zur Erkennung von Bedrohungen anhand von zwei konkreten Fallstudien analysiert. Im ersten Szenario wird die Leistungsfähigkeit von Modellen zur Erkennung von Email Spam-Kampagnen untersucht. E-Mail Spam-Kampagnen werden häufig von leicht zu bedienenden Tools erzeugt. Diese Tools erlauben es dem Benutzer, mit Hilfe eines Templates (z.B. einer regulären Grammatik) eine Emailvorlage zu definieren. Ein solches Template kann z.B. auf die Knoten eines Botnetzes verteilt werden. Dort werden Nachrichten mit diesem Template generiert und an verschiedene Absender verschickt. Die damit entstandenen E-Mail Spam-Kampagnen können riesige Datenmengen produzieren und somit zu einer Gefahr für die Stabilität der Infrastruktur von E-Mail-Service-Providern werden. Im zweiten Szenario wird die Leistungsfähigkeit von Modellen zur Erkennung von Malware untersucht. Malware bzw. Software, die schadhaften Programmcode enthält, kann Web-Server und Client-Computer über aktive Inhalte und Client-Computer über ausführbare Dateien beeinflussen. Somit kann die die reguläre und legitime Nutzung von Diensten verhindert werden. Des Weiteren kann Malware genutzt werden, um sensible Informationen zu sammeln oder Computer zu infiltrieren. Die Erkennung von Bedrohungen, die von E-Mail-Spam-Mails, Phishing-E-Mails oder Malware ausgehen, gestaltet sich schwierig. Zum einen verändern sich Bedrohungen von Zeit zu Zeit, zum anderen werden E-Mail-Spam-Mails oder Malware so modifiziert, dass sie von aktuellen Erkennungssystemen nicht oder nur schwer zu erkennen sind. Erkennungssysteme, die auf manuell erstellten Regeln basieren, sind deshalb wenig effektiv, da sie ständig administriert werden müssen. Sie müssen kontinuierlich gewartet werden, um neue Regeln (für veränderte oder neu auftretende Bedrohungen) zu erstellen und alte Regeln anzupassen bzw. zu löschen. Maschinelles Lernen ist ein Forschungsgebiet, das sich mit der Analyse von Daten und der Erkennung von Mustern beschäftigt, um bestimmte Aspekte in Daten, wie beispielsweise die Charakteristika von Malware, zu beschreiben. Mit Hilfe der Methoden des Maschinellen Lernens ist es möglich, automatisiert Muster in Daten zu erkennen. Diese Muster können genutzt werden, um Bedrohung gezielt und genau zu erkennen. Im ersten Teil wird ein Modell zur automatischen Erkennung von E-Mail-Spam-Kampag\-nen vorgestellt. Wir verwenden reguläre Ausdrücke als syntaktischen Rahmen, um E-Mail-Spam-Kampagnen zu beschreiben und E-Mails die zu einer E-Mail-Spam-Kampagne gehören zu identifizieren. Reguläre Ausdrücke sind intuitiv verständlich und können einfach von Administratoren genutzt werden, um E-Mail-Spam-Kampagnen zu beschreiben. Diese Arbeit stellt ein Modell vor, das für eine gegebene E-Mail-Spam-Kampagne einen regulären Ausdruck vorhersagt. In dieser Arbeit stellen wir ein Verfahren vor, um ein Modell zu bestimmen, das reguläre Ausdrücke vorhersagt, die zum Einen die Gesamtheit aller E-Mails in einer Spam-Kampagne abbilden und zum Anderen so verständlich aufgebaut sind, dass ein Systemadministrator eines E-Mail Servers diesen verwendet. Diese Problemstellung wird als ein zweistufiges Lernproblem mit strukturierten Ein- und Ausgaberäumen modelliert, welches mit Standardmethoden des Maschinellen Lernens gelöst werden kann. Hierzu werden eine geeignete Verlustfunktion, sowie ein Dekodierer für das resultierende Optimierungsproblem hergeleitet. Der zweite Teil behandelt die Analyse von Modellen zur Erkennung von Java-Script oder PHP-Dateien mit schadhaften Code. Viele neu entwickelte Malwareanalyse-Tools nutzen statische, dynamische oder eine Mischung beider Merkmalsarten als Eingabe, um Modelle zur Erkennung von Malware zu bilden. Um dynamische Merkmale zu extrahieren, wird eine Software oder ein Teil des Programmcodes in einer gesicherten Umgebung ausgeführt und das Verhalten (z.B. Speicherzugriffe oder Funktionsaufrufe) analysiert. Bei der statischen Analyse von Skripten und Software werden Merkmale direkt aus dem Programcode extrahiert. Um Erkennungsmechanismen, die nur auf statischen Merkmalen basieren, zu umgehen, wird der Programmcode oft maskiert. Die Maskierung von Programmcode wird genutzt, um einen bestimmten schadhaften Programmcode in vielen syntaktisch unterschiedlichen Varianten zu erzeugen. Der originale schadhafte Programmcode wird dabei erst zur Laufzeit generiert. Wird der Programmcode vor dem Anwenden eines Vorhersagemodells demaskiert, spricht man von einer vorwiegend statischen Programmcodeanalyse. Diese hat den Vorteil, dass enthaltener Schadcode einfacher zu erkennen ist. Großer Nachteil dieses Ansatzes ist die erhöhte Laufzeit durch das Demaskieren der einzelnen Dateien vor der Anwendung des Vorhersagemodells. In dieser Arbeit wird eine mehrstufige Architektur präsentiert, in der ein Klassifikator zunächst eine Vorhersage auf Grundlage einer statischen Analyse auf dem originalen Programmcode trifft. Basierend auf dieser Vorhersage wird der Programcode in einem zweiten Schritt demaskiert und erneut ein Vorhersagemodell angewendet. Wir betrachten dabei eine Vielzahl von möglichen Merkmalstypen, wie $n$-gram Merkmale, orthogonal sparse bigrams, Funktions-Hashes und Syntaxbaum Merkmale. Zudem wird in dieser Dissertation untersucht, wie robust die entwickelten Erkennungsmodelle gegenüber Veränderungen von Malware über die Zeit sind. Das vorgestellte Verfahren ermöglicht es, große Datenmengen mit hoher Treffergenauigkeit nach Malware zu durchsuchen. Alle in dieser Dissertation vorgestellten Modelle wurden auf echten Daten evaluiert und mit Referenzmethoden verglichen. Das vorgestellte Modell zur Erkennung von E-Mail-Spam-Kampagnen hat eine hohe richtig-positive Rate und eine sehr kleine falsch-positiv Rate die niedriger ist, als die eines kommerziellen E-Mail-Filters. Das Modell wird von einem kommerziellen E-Mail Service Provider während des operativen Geschäfts genutzt, um eingehende und ausgehende E-Mails eines E-Mails-Servers zu überprüfen. Der Ansatz zur Malwareerkennung wurde auf einem Datensatz mit rund 400.000 verdächtigen PHP Dateien und einer Sammlung von mehr als 1.000.000 Java-Script Dateien evaluiert. Die Fallstudie auf diesen Daten zeigt, dass das vorgestellte System schnell und mit hoher Genauigkeit riesige Datenmengen mit wenigen Falsch-Alarmen nach Malware durchsuchen kann. KW - malware detection KW - structured output prediction KW - pattern recognition KW - computer security KW - email spam detection KW - maschninelles Lernen KW - Computersicherheit KW - strukturierte Vorhersage KW - Klassifikation KW - Vorhersage KW - Spam KW - Malware Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100251 ER - TY - THES A1 - Videla, Santiago T1 - Reasoning on the response of logical signaling networks with answer set programming T1 - Modellierung Logischer Signalnetzwerke mittels Antwortmengenprogrammierung N2 - Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks. N2 - Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks. KW - Systembiologie KW - logische Signalnetzwerke KW - Antwortmengenprogrammierung KW - systems biology KW - logical signaling networks KW - answer set programming Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71890 ER - TY - THES A1 - Haider, Peter T1 - Prediction with Mixture Models T1 - Vorhersage mit Mischmodellen N2 - Learning a model for the relationship between the attributes and the annotated labels of data examples serves two purposes. Firstly, it enables the prediction of the label for examples without annotation. Secondly, the parameters of the model can provide useful insights into the structure of the data. If the data has an inherent partitioned structure, it is natural to mirror this structure in the model. Such mixture models predict by combining the individual predictions generated by the mixture components which correspond to the partitions in the data. Often the partitioned structure is latent, and has to be inferred when learning the mixture model. Directly evaluating the accuracy of the inferred partition structure is, in many cases, impossible because the ground truth cannot be obtained for comparison. However it can be assessed indirectly by measuring the prediction accuracy of the mixture model that arises from it. This thesis addresses the interplay between the improvement of predictive accuracy by uncovering latent cluster structure in data, and further addresses the validation of the estimated structure by measuring the accuracy of the resulting predictive model. In the application of filtering unsolicited emails, the emails in the training set are latently clustered into advertisement campaigns. Uncovering this latent structure allows filtering of future emails with very low false positive rates. In order to model the cluster structure, a Bayesian clustering model for dependent binary features is developed in this thesis. Knowing the clustering of emails into campaigns can also aid in uncovering which emails have been sent on behalf of the same network of captured hosts, so-called botnets. This association of emails to networks is another layer of latent clustering. Uncovering this latent structure allows service providers to further increase the accuracy of email filtering and to effectively defend against distributed denial-of-service attacks. To this end, a discriminative clustering model is derived in this thesis that is based on the graph of observed emails. The partitionings inferred using this model are evaluated through their capacity to predict the campaigns of new emails. Furthermore, when classifying the content of emails, statistical information about the sending server can be valuable. Learning a model that is able to make use of it requires training data that includes server statistics. In order to also use training data where the server statistics are missing, a model that is a mixture over potentially all substitutions thereof is developed. Another application is to predict the navigation behavior of the users of a website. Here, there is no a priori partitioning of the users into clusters, but to understand different usage scenarios and design different layouts for them, imposing a partitioning is necessary. The presented approach simultaneously optimizes the discriminative as well as the predictive power of the clusters. Each model is evaluated on real-world data and compared to baseline methods. The results show that explicitly modeling the assumptions about the latent cluster structure leads to improved predictions compared to the baselines. It is beneficial to incorporate a small number of hyperparameters that can be tuned to yield the best predictions in cases where the prediction accuracy can not be optimized directly. N2 - Das Lernen eines Modells für den Zusammenhang zwischen den Eingabeattributen und annotierten Zielattributen von Dateninstanzen dient zwei Zwecken. Einerseits ermöglicht es die Vorhersage des Zielattributs für Instanzen ohne Annotation. Andererseits können die Parameter des Modells nützliche Einsichten in die Struktur der Daten liefern. Wenn die Daten eine inhärente Partitionsstruktur besitzen, ist es natürlich, diese Struktur im Modell widerzuspiegeln. Solche Mischmodelle generieren Vorhersagen, indem sie die individuellen Vorhersagen der Mischkomponenten, welche mit den Partitionen der Daten korrespondieren, kombinieren. Oft ist die Partitionsstruktur latent und muss beim Lernen des Mischmodells mitinferiert werden. Eine direkte Evaluierung der Genauigkeit der inferierten Partitionsstruktur ist in vielen Fällen unmöglich, weil keine wahren Referenzdaten zum Vergleich herangezogen werden können. Jedoch kann man sie indirekt einschätzen, indem man die Vorhersagegenauigkeit des darauf basierenden Mischmodells misst. Diese Arbeit beschäftigt sich mit dem Zusammenspiel zwischen der Verbesserung der Vorhersagegenauigkeit durch das Aufdecken latenter Partitionierungen in Daten, und der Bewertung der geschätzen Struktur durch das Messen der Genauigkeit des resultierenden Vorhersagemodells. Bei der Anwendung des Filterns unerwünschter E-Mails sind die E-Mails in der Trainingsmende latent in Werbekampagnen partitioniert. Das Aufdecken dieser latenten Struktur erlaubt das Filtern zukünftiger E-Mails mit sehr niedrigen Falsch-Positiv-Raten. In dieser Arbeit wird ein Bayes'sches Partitionierunsmodell entwickelt, um diese Partitionierungsstruktur zu modellieren. Das Wissen über die Partitionierung von E-Mails in Kampagnen hilft auch dabei herauszufinden, welche E-Mails auf Veranlassen des selben Netzes von infiltrierten Rechnern, sogenannten Botnetzen, verschickt wurden. Dies ist eine weitere Schicht latenter Partitionierung. Diese latente Struktur aufzudecken erlaubt es, die Genauigkeit von E-Mail-Filtern zu erhöhen und sich effektiv gegen verteilte Denial-of-Service-Angriffe zu verteidigen. Zu diesem Zweck wird in dieser Arbeit ein diskriminatives Partitionierungsmodell hergeleitet, welches auf dem Graphen der beobachteten E-Mails basiert. Die mit diesem Modell inferierten Partitionierungen werden via ihrer Leistungsfähigkeit bei der Vorhersage der Kampagnen neuer E-Mails evaluiert. Weiterhin kann bei der Klassifikation des Inhalts einer E-Mail statistische Information über den sendenden Server wertvoll sein. Ein Modell zu lernen das diese Informationen nutzen kann erfordert Trainingsdaten, die Serverstatistiken enthalten. Um zusätzlich Trainingsdaten benutzen zu können, bei denen die Serverstatistiken fehlen, wird ein Modell entwickelt, das eine Mischung über potentiell alle Einsetzungen davon ist. Eine weitere Anwendung ist die Vorhersage des Navigationsverhaltens von Benutzern einer Webseite. Hier gibt es nicht a priori eine Partitionierung der Benutzer. Jedoch ist es notwendig, eine Partitionierung zu erzeugen, um verschiedene Nutzungsszenarien zu verstehen und verschiedene Layouts dafür zu entwerfen. Der vorgestellte Ansatz optimiert gleichzeitig die Fähigkeiten des Modells, sowohl die beste Partition zu bestimmen als auch mittels dieser Partition Vorhersagen über das Verhalten zu generieren. Jedes Modell wird auf realen Daten evaluiert und mit Referenzmethoden verglichen. Die Ergebnisse zeigen, dass das explizite Modellieren der Annahmen über die latente Partitionierungsstruktur zu verbesserten Vorhersagen führt. In den Fällen bei denen die Vorhersagegenauigkeit nicht direkt optimiert werden kann, erweist sich die Hinzunahme einer kleinen Anzahl von übergeordneten, direkt einstellbaren Parametern als nützlich. KW - maschinelles Lernen KW - Vorhersage KW - Clusteranalyse KW - Mischmodelle KW - machine learning KW - prediction KW - clustering KW - mixture models Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69617 ER - TY - THES A1 - Dick, Uwe T1 - Discriminative Classification Models for Internet Security T1 - Diskriminative Klassifikationsmodelle in der Internet-Sicherheit BT - Mitigating Email Spam and HTTP-Layer DDoS Attacks BT - Verhindern von Email-Spam und HTTP-Layer DDoS-Attacken N2 - Services that operate over the Internet are under constant threat of being exposed to fraudulent use. Maintaining good user experience for legitimate users often requires the classification of entities as malicious or legitimate in order to initiate countermeasures. As an example, inbound email spam filters decide for spam or non-spam. They can base their decision on both the content of each email as well as on features that summarize prior emails received from the sending server. In general, discriminative classification methods learn to distinguish positive from negative entities. Each decision for a label may be based on features of the entity and related entities. When labels of related entities have strong interdependencies---as can be assumed e.g. for emails being delivered by the same user---classification decisions should not be made independently and dependencies should be modeled in the decision function. This thesis addresses the formulation of discriminative classification problems that are tailored for the specific demands of the following three Internet security applications. Theoretical and algorithmic solutions are devised to protect an email service against flooding of user inboxes, to mitigate abusive usage of outbound email servers, and to protect web servers against distributed denial of service attacks. In the application of filtering an inbound email stream for unsolicited emails, utilizing features that go beyond each individual email's content can be valuable. Information about each sending mail server can be aggregated over time and may help in identifying unwanted emails. However, while this information will be available to the deployed email filter, some parts of the training data that are compiled by third party providers may not contain this information. The missing features have to be estimated at training time in order to learn a classification model. In this thesis an algorithm is derived that learns a decision function that integrates over a distribution of values for each missing entry. The distribution of missing values is a free parameter that is optimized to learn an optimal decision function. The outbound stream of emails of an email service provider can be separated by the customer IDs that ask for delivery. All emails that are sent by the same ID in the same period of time are related, both in content and in label. Hijacked customer accounts may send batches of unsolicited emails to other email providers, which in turn might blacklist the sender's email servers after detection of incoming spam emails. The risk of being blocked from further delivery depends on the rate of outgoing unwanted emails and the duration of high spam sending rates. An optimization problem is developed that minimizes the expected cost for the email provider by learning a decision function that assigns a limit on the sending rate to customers based on the each customer's email stream. Identifying attacking IPs during HTTP-level DDoS attacks allows to block those IPs from further accessing the web servers. DDoS attacks are usually carried out by infected clients that are members of the same botnet and show similar traffic patterns. HTTP-level attacks aim at exhausting one or more resources of the web server infrastructure, such as CPU time. If the joint set of attackers cannot increase resource usage close to the maximum capacity, no effect will be experienced by legitimate users of hosted web sites. However, if the additional load raises the computational burden towards the critical range, user experience will degrade until service may be unavailable altogether. As the loss of missing one attacker depends on block decisions for other attackers---if most other attackers are detected, not blocking one client will likely not be harmful---a structured output model has to be learned. In this thesis an algorithm is developed that learns a structured prediction decoder that searches the space of label assignments, guided by a policy. Each model is evaluated on real-world data and is compared to reference methods. The results show that modeling each classification problem according to the specific demands of the task improves performance over solutions that do not consider the constraints inherent to an application. N2 - Viele Dienste im Internet benötigen zur Gewährleistung ihrer Erreichbarkeit die Möglichkeit, Entitäten als entweder gefährlich oder harmlos zu klassifizieren. Diskriminative Methoden des maschinellen Lernens verwenden Features von Entitäten oder Entitätengruppen, um zwischen positiven und negativen Labels zu unterscheiden. So können beispielsweise Email-Spamfilter Entscheidungen aufgrund sowohl des Inhalts der Email als auch von Informationen treffen, die vorherige Emails des gleichen versendenden Servers zusammenfassen. Darüber hinaus sind Labels zueinander in Verbindung stehender Entitäten, wie z.B. Emails des gleichen Nutzers, oftmals nicht unabhängig, so dass auch Klassifikationsentscheidungen nicht unabhängig getroffen werden sollten. Diese Arbeit beschäftigt sich mit der Formulierung diskriminativer Klassifikationsprobleme, die den speziellen Anforderungen von drei Internetsicherheitsanwendungen Rechnung tragen. Theoretische und algorithmische Lösungen zum Spamschutz von Nutzer-Inboxen eines Emailanbieters, zum Schutz von ausgehenden Emailservern gegen Missbrauch und zur Abwehr von Distributed Denial of Service-Attacken auf Webserver werden entwickelt. Beim Säubern der bei einem Emailanbieter eingehenden Menge von Emails von ungewollten Emails wie Spam können Informationen, die über den Inhalt einzelner Emails hinausgehen, von großem Nutzen sein. Etwa können Informationen über einen Mailserver zeitlich aggregiert und zum Klassifizieren neuer Emails des gleichen Servers verwendet werden. Diese Informationen sind in der Regel nur für Emails verfügbar, die vom Emailanbieter selbst empfangen werden, und fehlen bei Datensätzen, die extern gesammelte Emails beinhalten. Während des Trainings eines Spamklassifikators müssen diese Features entsprechend geschätzt werden. In dieser Arbeit wird ein Algorithmus entwickelt, der eine Entscheidungsfunktion lernt, die über eine Verteilung von fehlenden Werten integriert. Die Verteilung ist ein freier Parameter, der während des Lernens der Entscheidungsfunktion optimiert wird. Der Strom ausgehender Emails eines Emailanbieters setzt sich zusammen aus Emails einzelner Kunden. Alle Emails, die vom gleichen Kunden im gleichen Zeitraum gesendet werden, sind sowohl bzgl. Inhalt als auch Label abhängig. Kompromittierte Kundenaccounts können beispielsweise Batches von Spams an andere Emailanbieter schicken. Nach erfolgter Spamerkennung könnten diese Anbieter die Mailserver des sendenden Anbieters auf eine Blacklist setzen und somit am Versand weiterer Emails hindern. Das Risiko einer solchen Blockierung ist abhängig von der Rate ausgehender ungewollter Emails und der Dauer hoher Senderaten. Es wird ein Optimierungsproblem entwickelt, das die erwarteten Kosten des Emailproviders minimiert, indem eine Entscheidungsfunktion gelernt wird, die die erlaubte Versenderate von Kunden aufgrund der gesendeten Emails dynamisch einstellt. Um angreifende IPs während einer HTTP-Level-DDoS-Attacke zu blockieren, müssen sie als solche erkannt werden. DDoS-Angriffe werden üblicherweise von Clients durchgeführt, die dem gleichen Botnet angehören und ähnliche Traffic-Muster aufweisen. HTTP-Level-Angriffe zielen darauf, eine oder mehrere Ressourcen der Webserverinfrastruktur, wie etwa CPU-Zeit, aufzubrauchen. Für legitime Besucher ergeben sich erst dann Einschränkungen der User Experience, bis hin zur Unerreichbarkeit der Webseite, wenn Angreifer den Ressourcenverbrauch in die Nähe oder über die Maximalkapazität steigern können. Dieser durch einen Angreifer verursachte Verlust hängt von Entscheidungen für andere Angreifer ab; werden z.B. die meisten anderen Angreifer erkannt, wird ein nicht geblockter Angreifer kaum Schaden anrichten. Es wird deshalb ein Algorithmus entwickelt, der einen Dekodierer für strukturierte Vorhersagen trainiert, der, geleitet durch eine Policy, den Raum der gemeinsamen Labelzuweisungen durchsucht. Alle Modelle werden auf industriellen Daten evaluiert und mit Referenzmethoden verglichen. Die Ergebnisse zeigen, dass anforderungsspezifische Modellierung der Klassifikationsprobleme die Performance gegenüber den Vergleichsmethoden verbessert. KW - Machine Learning KW - Internet Security KW - DDoS KW - Spam-Filtering KW - DDoS KW - Internet-Sicherheit KW - Maschinelles Lernen KW - Spam-Erkennung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102593 ER - TY - THES A1 - Al-Areqi, Samih Taha Mohammed T1 - Semantics-based automatic geospatial service composition T1 - Semantikbasierte automatische Komposition von GIS-Diensten N2 - Although it has become common practice to build applications based on the reuse of existing components or services, technical complexity and semantic challenges constitute barriers to ensuring a successful and wide reuse of components and services. In the geospatial application domain, the barriers are self-evident due to heterogeneous geographic data, a lack of interoperability and complex analysis processes. Constructing workflows manually and discovering proper services and data that match user intents and preferences is difficult and time-consuming especially for users who are not trained in software development. Furthermore, considering the multi-objective nature of environmental modeling for the assessment of climate change impacts and the various types of geospatial data (e.g., formats, scales, and georeferencing systems) increases the complexity challenges. Automatic service composition approaches that provide semantics-based assistance in the process of workflow design have proven to be a solution to overcome these challenges and have become a frequent demand especially by end users who are not IT experts. In this light, the major contributions of this thesis are: (i) Simplification of service reuse and workflow design of applications for climate impact analysis by following the eXtreme Model-Driven Development (XMDD) paradigm. (ii) Design of a semantic domain model for climate impact analysis applications that comprises specifically designed services, ontologies that provide domain-specific vocabulary for referring to types and services, and the input/output annotation of the services using the terms defined in the ontologies. (iii) Application of a constraint-driven method for the automatic composition of workflows for analyzing the impacts of sea-level rise. The application scenario demonstrates the impact of domain modeling decisions on the results and the performance of the synthesis algorithm. N2 - Obwohl es gängige Praxis geworden ist, Anwendungen basierend auf der Wiederverwendung von existierenden Komponenten oder Diensten zu bauen, stellen technische Komplexität und semantische Herausforderungen Hindernisse beim Sicherstellen einer erfolgreichen und breiten Wiederverwendungen von Komponenten und Diensten. In der geowissenschaftlichen Anwendungsdomäne sind die Hindernisse durch heterogene geografische Daten, fehlende Interoperabilität und komplexe Analyseprozessen besonders offensichtlich. Workflows manuell zu konstruieren und passende Dienste und Daten zu finden, welche die Nutzerabsichten und -präferenzen abdecken, ist schwierig und zeitaufwändig besonders für Nutzer, die nicht in der Softwareentwicklung ausgebildet sind. Zudem erhöhen die verschiedenen Zielrichtungen der Umweltmodellierung für die Bewertung der Auswirkungen von Klimaänderungen und die unterschiedlichen Typen geografischer Daten (z.B. Formate, Skalierungen, und Georeferenzsysteme) die Komplexität. Automatische Dienstkompositionsansätze, die Semantik-basierte Unterstützung im Prozess des Workflowdesigns zur Verfügung stellen, haben bewiesen eine Lösung zur Bewältigung dieser Herausforderungen zu sein und sind besonders von Endnutzern, die keine IT-Experten sind, eine häufige Forderung geworden. Unter diesem Gesichtspunkt sind die Hauptbeiträge dieser Doktorarbeit: I. Vereinfachung der Wiederverwendung von Diensten und des Workflowdesigns von Klimafolgenanalysen durch Anwendung des Paradigma des eXtreme Model-Driven Development (XMDD) II. Design eines semantischen Domänenmodells für Anwendungen der Klimafolgenanalysen, welches speziell entwickelte Dienste, Ontologien (die domänen-spezifisches Vokabular zur Verfügung stellen, um Typen und Dienste zu beschreiben), und Eingabe-/Ausgabe-Annotationen der Dienste (unter Verwendung von Begriffen, die in den Ontologien definiert sind) enthält. III. Anwendungen einer Constraint-getriebenen Methode für die automatische Komposition von Workflows zum Analysieren der Auswirkungen des Meeresspiegelanstiegs. Das Anwendungsszenario demonstriert die Auswirkung von Domänenmodellierungsentscheidungen auf die Ergebnisse und die Laufzeit des Synthesealgorithmus. KW - geospatial services KW - service composition KW - scientific workflows KW - semantic domain modeling KW - ontologies KW - climate impact analysis KW - GIS-Dienstkomposition KW - Wissenschaftlichesworkflows KW - semantische Domänenmodellierung KW - Ontologien KW - Klimafolgenanalyse Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-402616 ER -