TY - THES A1 - Moebert, Tobias T1 - Zum Einfluss von Adaptivität auf die Wahrnehmung von Komplexität in der Mensch-Technik-Interaktion T1 - On the Influence of Adaptivity upon the Perception of Complexity in Human-Technology Interaction BT - dargestellt am Beispiel Bildungstechnologie N2 - Wir leben in einer Gesellschaft, die von einem stetigen Wunsch nach Innovation und Fortschritt geprägt ist. Folgen dieses Wunsches sind die immer weiter fortschreitende Digitalisierung und informatische Vernetzung aller Lebensbereiche, die so zu immer komplexeren sozio-technischen Systemen führen. Ziele dieser Systeme sind u. a. die Unterstützung von Menschen, die Verbesserung ihrer Lebenssituation oder Lebensqualität oder die Erweiterung menschlicher Möglichkeiten. Doch haben neue komplexe technische Systeme nicht nur positive soziale und gesellschaftliche Effekte. Oft gibt es unerwünschte Nebeneffekte, die erst im Gebrauch sichtbar werden, und sowohl Konstrukteur*innen als auch Nutzer*innen komplexer vernetzter Technologien fühlen sich oft orientierungslos. Die Folgen können von sinkender Akzeptanz bis hin zum kompletten Verlust des Vertrauens in vernetze Softwaresysteme reichen. Da komplexe Anwendungen, und damit auch immer komplexere Mensch-Technik-Interaktionen, immer mehr an Relevanz gewinnen, ist es umso wichtiger, wieder Orientierung zu finden. Dazu müssen wir zuerst diejenigen Elemente identifizieren, die in der Interaktion mit vernetzten sozio-technischen Systemen zu Komplexität beitragen und somit Orientierungsbedarf hervorrufen. Mit dieser Arbeit soll ein Beitrag geleistet werden, um ein strukturiertes Reflektieren über die Komplexität vernetzter sozio-technischer Systeme im gesamten Konstruktionsprozess zu ermöglichen. Dazu wird zuerst eine Definition von Komplexität und komplexen Systemen erarbeitet, die über das informatische Verständnis von Komplexität (also der Kompliziertheit von Problemen, Algorithmen oder Daten) hinausgeht. Im Vordergrund soll vielmehr die sozio-technische Interaktion mit und in komplexen vernetzten Systemen stehen. Basierend auf dieser Definition wird dann ein Analysewerkzeug entwickelt, welches es ermöglicht, die Komplexität in der Interaktion mit sozio-technischen Systemen sichtbar und beschreibbar zu machen. Ein Bereich, in dem vernetzte sozio-technische Systeme zunehmenden Einzug finden, ist jener digitaler Bildungstechnologien. Besonders adaptiven Bildungstechnologien wurde in den letzten Jahrzehnten ein großes Potential zugeschrieben. Zwei adaptive Lehr- bzw. Trainingssysteme sollen deshalb exemplarisch mit dem in dieser Arbeit entwickelten Analysewerkzeug untersucht werden. Hierbei wird ein besonderes Augenmerkt auf den Einfluss von Adaptivität auf die Komplexität von Mensch-Technik-Interaktionssituationen gelegt. In empirischen Untersuchungen werden die Erfahrungen von Konstrukteur*innen und Nutzer*innen jener adaptiver Systeme untersucht, um so die entscheidenden Kriterien für Komplexität ermitteln zu können. Auf diese Weise können zum einen wiederkehrende Orientierungsfragen bei der Entwicklung adaptiver Bildungstechnologien aufgedeckt werden. Zum anderen werden als komplex wahrgenommene Interaktionssituationen identifiziert. An diesen Situationen kann gezeigt werden, wo aufgrund der Komplexität des Systems die etablierten Alltagsroutinen von Nutzenden nicht mehr ausreichen, um die Folgen der Interaktion mit dem System vollständig erfassen zu können. Dieses Wissen kann sowohl Konstrukteur*innen als auch Nutzer*innen helfen, in Zukunft besser mit der inhärenten Komplexität moderner Bildungstechnologien umzugehen. N2 - We live in a society that is characterized by a constant desire for innovation and progress. The consequences of this desire are the ever-increasing digitalization and networking of all areas of life, which thus lead to ever more complex socio-technical systems. The goals of these systems include supporting people, improving their living situation or quality of life, or expanding human possibilities. But new complex technical systems do not only have positive social and societal effects. Often there are undesirable side effects that only become apparent during use, and both designers and users of complex networked technologies often feel disoriented. The consequences can range from decreasing acceptance to a complete loss of trust in networked software systems. As complex applications, and thus increasingly complex human-technology interactions, become more and more relevant, it is all the more important to find orientation again. For this purpose, we first have to identify those elements that contribute to complexity in the interaction with networked socio-technical systems and thus create a need for orientation. This work is intended to contribute to a structured reflection on the complexity of networked socio-technical systems throughout the entire construction process. For this purpose, a definition of complexity and complex system is first developed, which goes beyond the informatics understanding of complexity (i.e. the complexity of problems, algorithms, or data). The focus will rather be on the socio-technical interaction with and within complex networked systems. Based on this definition, an analysis tool will be developed, which allows us to make the complexity in the interaction with socio-technical systems visible and describable. One area in which networked socio-technical systems are becoming increasingly important is that of digital educational technologies. Adaptive educational technologies in particular have been attributed a great potential in the last decades. Therefore, two adaptive teaching and training systems will be examined with the analysis tool developed in this thesis. Special attention will be paid to the influence of adaptivity on the complexity of human-technology interaction situations. In empirical studies, the experiences of users and constructors of those adaptive systems will be examined to determine the decisive criteria for complexity. In this way, recurring questions of orientation in the development of adaptive educational technologies can be uncovered. Furthermore, interaction situations perceived as complex are identified. These situations can be used to show where, due to the complexity of the system, the established everyday routines of users are no longer sufficient to fully grasp the consequences of interaction with the system. This knowledge can help both designers and users to better deal with the inherent complexity of modern educational technologies in the future. KW - Bildungstechnologien KW - Mensch-Technik-Interaktion KW - Komplexität KW - Adaptivität KW - Methodik KW - Adaptivity KW - Educational Technologies KW - Complexity KW - Human-Technology Interaction KW - Methodology Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-499926 ER - TY - JOUR A1 - Middelanis, Robin A1 - Willner, Sven N. A1 - Otto, Christian A1 - Kuhla, Kilian A1 - Quante, Lennart A1 - Levermann, Anders T1 - Wave-like global economic ripple response to Hurricane Sandy JF - Environmental research letters : ERL / Institute of Physics N2 - Tropical cyclones range among the costliest disasters on Earth. Their economic repercussions along the supply and trade network also affect remote economies that are not directly affected. We here simulate possible global repercussions on consumption for the example case of Hurricane Sandy in the US (2012) using the shock-propagation model Acclimate. The modeled shock yields a global three-phase ripple: an initial production demand reduction and associated consumption price decrease, followed by a supply shortage with increasing prices, and finally a recovery phase. Regions with strong trade relations to the US experience strong magnitudes of the ripple. A dominating demand reduction or supply shortage leads to overall consumption gains or losses of a region, respectively. While finding these repercussions in historic data is challenging due to strong volatility of economic interactions, numerical models like ours can help to identify them by approaching the problem from an exploratory angle, isolating the effect of interest. For this, our model simulates the economic interactions of over 7000 regional economic sectors, interlinked through about 1.8 million trade relations. Under global warming, the wave-like structures of the economic response to major hurricanes like the one simulated here are likely to intensify and potentially overlap with other weather extremes. KW - supply chains KW - Hurricane Sandy KW - economic ripples KW - extreme weather KW - impacts KW - loss propagation KW - natural disasters Y1 - 2021 U6 - https://doi.org/10.1088/1748-9326/ac39c0 SN - 1748-9326 VL - 16 IS - 12 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Hawro, Tomasz A1 - Przybylowicz, Katarzyna A1 - Spindler, Max A1 - Hawro, Marlena A1 - Steć, Michał A1 - Altrichter, Sabine A1 - Weller, Karsten A1 - Magerl, Markus A1 - Reidel, Ulrich A1 - Alarbeed, Ezzat A1 - Alraboni, Ola A1 - Maurer, Marcus A1 - Metz, Martin T1 - The characteristics and impact of pruritus in adult dermatology patients BT - a prospective, cross-sectional study JF - Journal of the American Academy of Dermatology N2 - Background: Pruritus often accompanies chronic skin diseases, exerting considerable burden on many areas of patient functioning; this burden and the features of pruritus remain insufficiently characterized. Objective: To investigate characteristics, including localization patterns, and burden of pruritus in patients with chronic dermatoses. Methods: We recruited 800 patients with active chronic skin diseases. We assessed pruritus intensity, localization, and further characteristics. We used validated questionnaires to assess quality of life, work productivity and activity impairment, anxiety, depression, and sleep quality. Results: Nine out of every 10 patients had experienced pruritus throughout their disease and 73% in the last 7 days. Pruritus often affected the entire body and was not restricted to skin lesions. Patients with moderate to severe pruritus reported significantly more impairment to their sleep quality and work productivity, and they were more depressed and anxious than control individuals and patients with mild or no pruritus. Suicidal ideations were highly prevalent in patients with chronic pruritus (18.5%) and atopic dermatitis (11.8%). Conclusions: Pruritus prevalence and intensity are very high across all dermatoses studied; intensity is linked to impairment in many areas of daily functioning. Effective treatment strategies are urgently required to treat pruritus and the underlying skin disease. ( J Am Acad Dermatol 2021;84:691-700.) KW - activity KW - anxiety KW - depression KW - pruritus KW - quality of life KW - sleep quality KW - suicidal ideations KW - work productivity Y1 - 2021 U6 - https://doi.org/10.1016/J.JAAD.2020.08.035 SN - 0190-9622 SN - 1097-6787 VL - 84 IS - 3 SP - 691 EP - 700 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Bordihn, Henning A1 - Vaszil, György T1 - Reversible parallel communicating finite automata systems JF - Acta informatica N2 - We study the concept of reversibility in connection with parallel communicating systems of finite automata (PCFA in short). We define the notion of reversibility in the case of PCFA (also covering the non-deterministic case) and discuss the relationship of the reversibility of the systems and the reversibility of its components. We show that a system can be reversible with non-reversible components, and the other way around, the reversibility of the components does not necessarily imply the reversibility of the system as a whole. We also investigate the computational power of deterministic centralized reversible PCFA. We show that these very simple types of PCFA (returning or non-returning) can recognize regular languages which cannot be accepted by reversible (deterministic) finite automata, and that they can even accept languages that are not context-free. We also separate the deterministic and non-deterministic variants in the case of systems with non-returning communication. We show that there are languages accepted by non-deterministic centralized PCFA, which cannot be recognized by any deterministic variant of the same type. KW - Finite automata KW - Reversibility KW - Systems of parallel communicating KW - automata Y1 - 2021 U6 - https://doi.org/10.1007/s00236-021-00396-9 SN - 0001-5903 SN - 1432-0525 VL - 58 IS - 4 SP - 263 EP - 279 PB - Springer CY - Berlin ; Heidelberg ; New York, NY ER - TY - JOUR A1 - Quante, Lennart A1 - Willner, Sven N. A1 - Middelanis, Robin A1 - Levermann, Anders T1 - Regions of intensification of extreme snowfall under future warming JF - Scientific reports N2 - Due to climate change the frequency and character of precipitation are changing as the hydrological cycle intensifies. With regards to snowfall, global warming has two opposing influences; increasing humidity enables intense snowfall, whereas higher temperatures decrease the likelihood of snowfall. Here we show an intensification of extreme snowfall across large areas of the Northern Hemisphere under future warming. This is robust across an ensemble of global climate models when they are bias-corrected with observational data. While mean daily snowfall decreases, both the 99th and the 99.9th percentiles of daily snowfall increase in many regions in the next decades, especially for Northern America and Asia. Additionally, the average intensity of snowfall events exceeding these percentiles as experienced historically increases in many regions. This is likely to pose a challenge to municipalities in mid to high latitudes. Overall, extreme snowfall events are likely to become an increasingly important impact of climate change in the next decades, even if they will become rarer, but not necessarily less intense, in the second half of the century. Y1 - 2021 U6 - https://doi.org/10.1038/s41598-021-95979-4 SN - 2045-2322 VL - 11 IS - 1 PB - Macmillan Publishers Limited, part of Springer Nature CY - Berlin ER - TY - JOUR A1 - Camargo, Tibor de A1 - Schirrmann, Michael A1 - Landwehr, Niels A1 - Dammer, Karl-Heinz A1 - Pflanz, Michael T1 - Optimized deep learning model as a basis for fast UAV mapping of weed species in winter wheat crops JF - Remote sensing / Molecular Diversity Preservation International (MDPI) N2 - Weed maps should be available quickly, reliably, and with high detail to be useful for site-specific management in crop protection and to promote more sustainable agriculture by reducing pesticide use. Here, the optimization of a deep residual convolutional neural network (ResNet-18) for the classification of weed and crop plants in UAV imagery is proposed. The target was to reach sufficient performance on an embedded system by maintaining the same features of the ResNet-18 model as a basis for fast UAV mapping. This would enable online recognition and subsequent mapping of weeds during UAV flying operation. Optimization was achieved mainly by avoiding redundant computations that arise when a classification model is applied on overlapping tiles in a larger input image. The model was trained and tested with imagery obtained from a UAV flight campaign at low altitude over a winter wheat field, and classification was performed on species level with the weed species Matricaria chamomilla L., Papaver rhoeas L., Veronica hederifolia L., and Viola arvensis ssp. arvensis observed in that field. The ResNet-18 model with the optimized image-level prediction pipeline reached a performance of 2.2 frames per second with an NVIDIA Jetson AGX Xavier on the full resolution UAV image, which would amount to about 1.78 ha h(-1) area output for continuous field mapping. The overall accuracy for determining crop, soil, and weed species was 94%. There were some limitations in the detection of species unknown to the model. When shifting from 16-bit to 32-bit model precision, no improvement in classification accuracy was observed, but a strong decline in speed performance, especially when a higher number of filters was used in the ResNet-18 model. Future work should be directed towards the integration of the mapping process on UAV platforms, guiding UAVs autonomously for mapping purpose, and ensuring the transferability of the models to other crop fields. KW - ResNet KW - deep residual networks KW - UAV imagery KW - embedded systems KW - crop KW - monitoring KW - image classification KW - site-specific weed management KW - real-time mapping Y1 - 2021 U6 - https://doi.org/10.3390/rs13091704 SN - 2072-4292 VL - 13 IS - 9 PB - MDPI CY - Basel ER - TY - JOUR A1 - Bordihn, Henning A1 - Holzer, Markus T1 - On the number of active states in finite automata JF - Acta informatica N2 - We introduce a new measure of descriptional complexity on finite automata, called the number of active states. Roughly speaking, the number of active states of an automaton A on input w counts the number of different states visited during the most economic computation of the automaton A for the word w. This concept generalizes to finite automata and regular languages in a straightforward way. We show that the number of active states of both finite automata and regular languages is computable, even with respect to nondeterministic finite automata. We further compare the number of active states to related measures for regular languages. In particular, we show incomparability to the radius of regular languages and that the difference between the number of active states and the total number of states needed in finite automata for a regular language can be of exponential order. Y1 - 2021 U6 - https://doi.org/10.1007/s00236-021-00397-8 SN - 0001-5903 SN - 1432-0525 VL - 58 IS - 4 SP - 301 EP - 318 PB - Springer CY - Berlin ; Heidelberg [u.a.] ER - TY - JOUR A1 - Brede, Nuria A1 - Botta, Nicola T1 - On the correctness of monadic backward induction JF - Journal of functional programming N2 - In control theory, to solve a finite-horizon sequential decision problem (SDP) commonly means to find a list of decision rules that result in an optimal expected total reward (or cost) when taking a given number of decision steps. SDPs are routinely solved using Bellman's backward induction. Textbook authors (e.g. Bertsekas or Puterman) typically give more or less formal proofs to show that the backward induction algorithm is correct as solution method for deterministic and stochastic SDPs. Botta, Jansson and Ionescu propose a generic framework for finite horizon, monadic SDPs together with a monadic version of backward induction for solving such SDPs. In monadic SDPs, the monad captures a generic notion of uncertainty, while a generic measure function aggregates rewards. In the present paper, we define a notion of correctness for monadic SDPs and identify three conditions that allow us to prove a correctness result for monadic backward induction that is comparable to textbook correctness proofs for ordinary backward induction. The conditions that we impose are fairly general and can be cast in category-theoretical terms using the notion of Eilenberg-Moore algebra. They hold in familiar settings like those of deterministic or stochastic SDPs, but we also give examples in which they fail. Our results show that backward induction can safely be employed for a broader class of SDPs than usually treated in textbooks. However, they also rule out certain instances that were considered admissible in the context of Botta et al. 's generic framework. Our development is formalised in Idris as an extension of the Botta et al. framework and the sources are available as supplementary material. Y1 - 2021 U6 - https://doi.org/10.1017/S0956796821000228 SN - 1469-7653 SN - 0956-7968 VL - 31 PB - Cambridge University Press CY - Cambridge ER - TY - THES A1 - Sahlmann, Kristina T1 - Network management with semantic descriptions for interoperability on the Internet of Things T1 - Netzwerk Management mit semantischen Beschreibungen für Interoperabilität im Internet der Dinge N2 - The Internet of Things (IoT) is a system of physical objects that can be discovered, monitored, controlled, or interacted with by electronic devices that communicate over various networking interfaces and eventually can be connected to the wider Internet. [Guinard and Trifa, 2016]. IoT devices are equipped with sensors and/or actuators and may be constrained in terms of memory, computational power, network bandwidth, and energy. Interoperability can help to manage such heterogeneous devices. Interoperability is the ability of different types of systems to work together smoothly. There are four levels of interoperability: physical, network and transport, integration, and data. The data interoperability is subdivided into syntactic and semantic data. Semantic data describes the meaning of data and the common understanding of vocabulary e.g. with the help of dictionaries, taxonomies, ontologies. To achieve interoperability, semantic interoperability is necessary. Many organizations and companies are working on standards and solutions for interoperability in the IoT. However, the commercial solutions produce a vendor lock-in. They focus on centralized approaches such as cloud-based solutions. This thesis proposes a decentralized approach namely Edge Computing. Edge Computing is based on the concepts of mesh networking and distributed processing. This approach has an advantage that information collection and processing are placed closer to the sources of this information. The goals are to reduce traffic, latency, and to be robust against a lossy or failed Internet connection. We see management of IoT devices from the network configuration management perspective. This thesis proposes a framework for network configuration management of heterogeneous, constrained IoT devices by using semantic descriptions for interoperability. The MYNO framework is an acronym for MQTT, YANG, NETCONF and Ontology. The NETCONF protocol is the IETF standard for network configuration management. The MQTT protocol is the de-facto standard in the IoT. We picked up the idea of the NETCONF-MQTT bridge, originally proposed by Scheffler and Bonneß[2017], and extended it with semantic device descriptions. These device descriptions provide a description of the device capabilities. They are based on the oneM2M Base ontology and formalized by the Semantic Web Standards. The novel approach is using a ontology-based device description directly on a constrained device in combination with the MQTT protocol. The bridge was extended in order to query such descriptions. Using a semantic annotation, we achieved that the device capabilities are self-descriptive, machine readable and re-usable. The concept of a Virtual Device was introduced and implemented, based on semantic device descriptions. A Virtual Device aggregates the capabilities of all devices at the edge network and contributes therefore to the scalability. Thus, it is possible to control all devices via a single RPC call. The model-driven NETCONF Web-Client is generated automatically from this YANG model which is generated by the bridge based on the semantic device description. The Web-Client provides a user-friendly interface, offers RPC calls and displays sensor values. We demonstrate the feasibility of this approach in different use cases: sensor and actuator scenarios, as well as event configuration and triggering. The semantic approach results in increased memory overhead. Therefore, we evaluated CBOR and RDF HDT for optimization of ontology-based device descriptions for use on constrained devices. The evaluation shows that CBOR is not suitable for long strings and RDF HDT is a promising candidate but is still a W3C Member Submission. Finally, we used an optimized JSON-LD format for the syntax of the device descriptions. One of the security tasks of network management is the distribution of firmware updates. The MYNO Update Protocol (MUP) was developed and evaluated on constrained devices CC2538dk and 6LoWPAN. The MYNO update process is focused on freshness and authenticity of the firmware. The evaluation shows that it is challenging but feasible to bring the firmware updates to constrained devices using MQTT. As a new requirement for the next MQTT version, we propose to add a slicing feature for the better support of constrained devices. The MQTT broker should slice data to the maximum packet size specified by the device and transfer it slice-by-slice. For the performance and scalability evaluation of MYNO framework, we setup the High Precision Agriculture demonstrator with 10 ESP-32 NodeMCU boards at the edge of the network. The ESP-32 NodeMCU boards, connected by WLAN, were equipped with six sensors and two actuators. The performance evaluation shows that the processing of ontology-based descriptions on a Raspberry Pi 3B with the RDFLib is a challenging task regarding computational power. Nevertheless, it is feasible because it must be done only once per device during the discovery process. The MYNO framework was tested with heterogeneous devices such as CC2538dk from Texas Instruments, Arduino Yún Rev 3, and ESP-32 NodeMCU, and IP-based networks such as 6LoWPAN and WLAN. Summarizing, with the MYNO framework we could show that the semantic approach on constrained devices is feasible in the IoT. N2 - Ein Netzwerk von physischen Objekten (Dingen), die von elektronischen Geräten entdeckt, überwacht und gesteuert werden können, die über verschiedene Netzwerkschnittstellen kommunizieren und schließlich mit dem Internet verbunden werden können, bezeichnet man als Internet of Things (Internet der Dinge, IoT) [Guinard und Trifa, 2016]. Die elektronischen Geräte sind mit Sensoren und Aktuatoren ausgestattet und verfügen oft nur über begrenzte Rechenressourcen wie Leistung, Speicher, Netzwerkbandbreite und Energie. Interoperabilität ist die Fähigkeit verschiedener Systemtypen reibungslos zusammenzuarbeiten und kann helfen, heterogenen Geräte im IoT zu verwalten. Die Semantische Interoperabilität stellt sicher, dass die Bedeutung von Daten und das gemeinsame Verständnis des Vokabulars zwischen den Systemen vorhanden ist. Viele Organisationen und Unternehmen arbeiten an Standards und Lösungen für die Interoperabilität im IoT, bieten aber nur Insellösungen an. Die kommerziellen Lösungen führen jedoch zu einer Lieferantenbindung. Sie konzentrieren sich auf zentralisierte Ansätze wie Cloud-basierte Lösungen. Wir verfolgen einen dezentralen Ansatz, nämlich Edge Computing, und sehen die Verwaltung von IoT-Geräten aus der Perspektive des Netzwerkkonfigurationsmanagements. In dieser Arbeit wird ein Framework für das Netzwerkkonfigurationsmanagement heterogener IoT-Geräte mit begrenzten Rechenressourcen unter Verwendung semantischer Beschreibungen für die Interoperabilität vorgestellt. Das MYNO-Framework steht für die verwendeten Technologien MQTT, YANG, NETCONF und Ontologie. Das NETCONF-Protokoll ist der IETF-Standard für das Netzwerkkonfigurations-management und verwendet YANG als Datenmodellierungssprache. Das MQTT-Protokoll ist der De-facto-Standard im IoT. Die semantischen Beschreibungen enthalten eine detaillierte Liste der Gerätefunktionen. Sie basieren auf der oneM2M Base-Ontologie und verwenden Semantic Web Standards. Das Konzept eines Virtuellen Geräts wurde basierend auf den semantischen Gerätebeschreibungen eingeführt und implementiert. Der modellgesteuerte NETCONF Web-Client wird automatisch auf Basis von YANG generiert, das auf Basis der semantischen Gerätebeschreibung erstellt wird. Wir demonstrieren die Machbarkeit des MYNO Ansatzes in verschiedenen Anwendungsfällen: Sensor- und Aktuator-Szenarien sowie Ereigniskonfiguration und -auslösung. Eine der Sicherheitsaufgaben des Netzwerkmanagements ist die Verteilung von Firmware-Updates. Das MYNO Update Protocol (MUP) wurde auf den Geräten CC2538dk und 6LoWPAN Netzwerk entwickelt und evaluiert. Für die Bewertung der Leistung und Skalierbarkeit des MYNO-Frameworks wurde ein Precision Agriculture Demonstrator mit 10 ESP-32 NodeMCU Geräten eingerichtet. Zusammenfassend konnten wir mit dem MYNO-Framework zeigen, dass der semantische Ansatz für Geräte mit limitierten Rechenressourcen im Internet of Things machbar ist. KW - Internet of Things KW - Network Management KW - MQTT KW - Ontology KW - Interoperability KW - Netzwerk Management KW - Interoperabilität KW - Sensornetzwerke KW - Ontologie KW - 6LoWPAN KW - Semantic Web KW - IoT KW - NETCONF KW - oneM2M Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-529846 ER - TY - THES A1 - Dehne, Julian T1 - Möglichkeiten und Limitationen der medialen Unterstützung forschenden Lernens N2 - Forschendes Lernen und die digitale Transformation sind zwei der wichtigsten Einflüsse auf die Entwicklung der Hochschuldidaktik im deutschprachigen Raum. Während das forschende Lernen als normative Theorie das sollen beschreibt, geben die digitalen Werkzeuge, alte wie neue, das können in vielen Bereichen vor. In der vorliegenden Arbeit wird ein Prozessmodell aufgestellt, was den Versuch unternimmt, das forschende Lernen hinsichtlich interaktiver, gruppenbasierter Prozesse zu systematisieren. Basierend auf dem entwickelten Modell wurde ein Softwareprototyp implementiert, der den gesamten Forschungsprozess begleiten kann. Dabei werden Gruppenformation, Feedback- und Reflexionsprozesse und das Peer Assessment mit Bildungstechnologien unterstützt. Die Entwicklungen wurden in einem qualitativen Experiment eingesetzt, um Systemwissen über die Möglichkeiten und Grenzen der digitalen Unterstützung von forschendem Lernen zu gewinnen. N2 - Research-based learning and digital transformation are two of the most important influences on the development of pedagogies of universities in German-speaking countries. While research-based learning as a normative theory explains the should, the digital tools, both old and new, provide the can in many areas. In the present work, a process model was developed, which captures research-based learning with regard to interactive, group-based processes. Based on this model a software prototype was implemented that can accompany the entire research process. Thereby group formation, feedback and reflection processes and peer assessment are supported with educational technology. The developed software was used in a qualitative experiment to gain knowledge about the possibilities and limits of digital support for research-based learning. T2 - Limits and chances of supporting inquiry-based learning with digital media KW - Forschendes Lernen KW - Digitale Medien KW - Modellierung KW - Bildungstechnologien KW - Educational Technologies KW - Digital Media KW - Inquiry-based learning KW - Modelling Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-497894 ER -