TY - THES A1 - Kegelmann, Lukas T1 - Advancing charge selective contacts for efficient monolithic perovskite-silicon tandem solar cells T1 - Entwicklung Ladungsselektiver Kontakte für Effiziente Monolithische Perowskit-Silizium Tandem-Solarzellen N2 - Hybrid organic-inorganic perovskites are one of the most promising material classes for photovoltaic energy conversion. In solar cells, the perovskite absorber is sandwiched between n- and p-type contact layers which selectively transport electrons and holes to the cell’s cathode and anode, respectively. This thesis aims to advance contact layers in perovskite solar cells and unravel the impact of interface and contact properties on the device performance. Further, the contact materials are applied in monolithic perovskite-silicon heterojunction (SHJ) tandem solar cells, which can overcome the single junction efficiency limits and attract increasing attention. Therefore, all contact layers must be highly transparent to foster light harvesting in the tandem solar cell design. Besides, the SHJ device restricts processing temperatures for the selective contacts to below 200°C. A comparative study of various electron selective contact materials, all processed below 180°C, in n-i-p type perovskite solar cells highlights that selective contacts and their interfaces to the absorber govern the overall device performance. Combining fullerenes and metal-oxides in a TiO2/PC60BM (phenyl-C60-butyric acid methyl ester) double-layer contact allows to merge good charge extraction with minimized interface recombination. The layer sequence thereby achieved high stabilized solar cell performances up to 18.0% and negligible current-voltage hysteresis, an otherwise pronounced phenomenon in this device design. Double-layer structures are therefore emphasized as a general concept to establish efficient and highly selective contacts. Based on this success, the concept to combine desired properties of different materials is transferred to the p-type contact. Here, a mixture of the small molecule Spiro-OMeTAD [2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)-9,9’-spirobifluoren] and the doped polymer PEDOT [poly(3,4-ethylenedioxythiophene)] is presented as a novel hole selective contact. PEDOT thereby remarkably suppresses charge recombination at the perovskite surface, allowing an increase of quasi-Fermi level splitting in the absorber. Further, the addition of Spiro-OMeTAD into the PEDOT layer is shown to enhance charge extraction at the interface and allow high efficiencies up to 16.8%. Finally, the knowledge on contact properties is applied to monolithic perovskite-SHJ tandem solar cells. The main goal is to optimize the top contact stack of doped Spiro-OMeTAD/molybdenum oxide(MoOx)/ITO towards higher transparency by two different routes. First, fine-tuning of the ITO deposition to mitigate chemical reduction of MoOx and increase the transmittance of MoOx/ITO stacks by 25%. Second, replacing Spiro-OMeTAD with the alternative hole transport materials PEDOT/Spiro-OMeTAD mixtures, CuSCN or PTAA [poly(triaryl amine)]. Experimental results determine layer thickness constrains and validate optical simulations, which subsequently allow to realistically estimate the respective tandem device performances. As a result, PTAA represents the most promising replacement for Spiro-OMeTAD, with a projected increase of the optimum tandem device efficiency for the herein used architecture by 2.9% relative to 26.5% absolute. The results also reveal general guidelines for further performance gains of the technology. N2 - Hybride, organisch-anorganische Perowskite gelten als eine der vielversprechendsten Materialklassen für die photovoltaische Energieumwandlung. Dazu werden Perowskit-Absorber in Solarzellen zwischen n- und p-Typ Kontaktschichten angeordnet, die Elektronen oder Löcher selektiv zur Kathode bzw. Anode der Zelle transportieren. Ziel dieser Arbeit ist es, die ladungsselektiven Transportschichten in Perowskit-Solarzellen zu verbessern und Einflüsse der Grenzflächen- und Kontakteigenschaften auf die Zelleffizienz herauszustellen. Darüber hinaus werden die selektiven Schichten in monolithischen Perowskit-Silizium-Heterokontakt (SHK) Tandem-Solarzellen eingesetzt. Diese können höhere Wirkungsgrade als Einfachsolarzellen erzielen und erfahren zunehmende Aufmerksamkeit aus der Forschung. Hierfür müssen alle Kontaktschichten hochtransparent sein, um eine möglichst effiziente Lichtausnutzung im Tandem-Solarzellen-Design zu erzielen. Des Weiteren limitiert die SHK-Solarzelle die höchst mögliche Temperatur zur Abscheidung der selektiven Kontakte auf 200°C. In einer Vergleichsstudie werden deshalb zunächst verschiedene elektronenselektive Kontaktmaterialien, die alle unter 180°C prozessiert werden, in n-i-p-Typ Perowskit-Solarzellen eingesetzt. Es zeigt sich hierbei, wie wesentlich die selektiven Kontakte und ihre Grenzflächen zum Absorber die Effizienz der Solarzellen bestimmen. Eine Kombination aus Fulleren und Metalloxid in einem TiO2/PC60BM (Phenyl-C60-Buttersäuremethylester) Doppelschichtkontakt ermöglicht dabei eine besonders gute Ladungsextraktion und stark reduzierte Grenzflächenrekombination. Die Materialzusammenstellung erreicht in der Studie hohe stabilisierte Solarzellenwirkungsgrade bis zu 18,0% und eine vernachlässigbare Strom-Spannungs-Hysterese, ein üblicherweise ausgeprägtes Phänomen in diesem Zellaufbau. Das Ergebnis stellt Doppelschicht-Strukturen als generelles Konzept zur Herstellung effizienter und hochselektiver Kontakte heraus. Basierend auf diesem Erfolg wird das Konzept, Eigenschaften verschiedener Materialien miteinander zu kombinieren, anschließend auf den p-Typ Kontakt übertragen. Dazu wird ein neuartiger lochselektiver Kontakt vorgestellt, bestehend aus einer Mischung des kleinen Moleküls Spiro-OMeTAD [2,2‘7,7‘-tetrakis(N,N-di-p-methoxyphenylamin)-9,9‘-spirobifluoren] und dem dotierten Polymer PEDOT [poly(3,4-ethylendioxythiophen)]. PEDOT unterdrückt dabei bemerkenswerter Weiße die Ladungsträgerrekombination an der Perowskit-Grenzfläche, wodurch eine Erhöhung der Quasi-Fermi-Niveau-Aufspaltung im Absorber erzielt wird. Weiterhin wird gezeigt, dass die Zugabe von Spiro-OMeTAD in die PEDOT-Schicht die Lochextraktion an der Grenzfläche verbessert und folglich hohe Solarzellenwirkungsgrade von bis zu 16,8% ermöglicht. Schließlich wird das gewonnene Wissen über die Bedeutung der Kontakt- und Grenzflächeneigenschaften auf monolithische Perowskit-SHK-Tandemsolarzellen angewandt. Das Hauptziel dabei ist die Optimierung des oberen Kontaktstapels, bestehend aus dotiertem Spiro-OMeTAD/Molybdän Oxid (MoOx)/ITO, hin zu verbesserter Transparenz. Zwei verschiedene Ansätze werden hierzu verfolgt. Erstens, durch Feinanpassung der ITO-Abscheidung kann eine chemische Reduktion von MoOx verringert und die Transmission von MoOx/ITO-Schichtstapeln um 25% erhöht werden. Zweitens: Durch Ersetzen des Spiro-OMeTAD mit alternativen, transparenteren Lochtransportmaterialien sollen parasitäre Absorptionsverluste vermieden werden. Als potentielle Lochkontakte werden dabei PEDOT/Spiro-OMeTAD-Mischungen, CuSCN und PTAA [Poly(triarylamin)] analysiert. Experimentelle Untersuchungen liefern optimierte Dicken der Lochkontakt und MoOx Schichten und dienen der Validierung optischer Simulationen der Schichtstapel. Dies erlaubt im Folgenden eine realistische Abschätzung der maximal erreichbaren Tandemsolarzelleneffizienzen. Dabei stellt PTAA den vielversprechendsten Ersatz für Spiro-OMeTAD dar, mit einer prognostizierten Erhöhung des erreichbaren Tandem-Solarzellenwirkungsgrad um 2,9% relativ auf 26,5% absolut. Die Ergebnisse stellen zudem einen Leitfaden zur weiteren Effizienzsteigerung der Tandemsolarzellen-Technologie dar. KW - perovskite KW - silicon KW - tandem solar cell KW - interface engineering KW - contact layers KW - Perowskit KW - Silizium KW - Tandem-Solarzelle KW - Interface-Engineering KW - Kontaktschichten Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426428 ER - TY - THES A1 - Paganini, Claudio Francesco T1 - The role of trapping in black hole spacetimes T1 - Über die Rolle gefangener lichtartiger Kurven in Raumzeiten mit Schwarzen Löchern N2 - In the here presented work we discuss a series of results that are all in one way or another connected to the phenomenon of trapping in black hole spacetimes. First we present a comprehensive review of the Kerr-Newman-Taub-NUT-de-Sitter family of black hole spacetimes and their most important properties. From there we go into a detailed analysis of the bahaviour of null geodesics in the exterior region of a sub-extremal Kerr spacetime. We show that most well known fundamental properties of null geodesics can be represented in one plot. In particular, one can see immediately that the ergoregion and trapping are separated in phase space. We then consider the sets of future/past trapped null geodesics in the exterior region of a sub-extremal Kerr-Newman-Taub-NUT spacetime. We show that from the point of view of any timelike observer outside of such a black hole, trapping can be understood as two smooth sets of spacelike directions on the celestial sphere of the observer. Therefore the topological structure of the trapped set on the celestial sphere of any observer is identical to that in Schwarzschild. We discuss how this is relevant to the black hole stability problem. In a further development of these observations we introduce the notion of what it means for the shadow of two observers to be degenerate. We show that, away from the axis of symmetry, no continuous degeneration exists between the shadows of observers at any point in the exterior region of any Kerr-Newman black hole spacetime of unit mass. Therefore, except possibly for discrete changes, an observer can, by measuring the black holes shadow, determine the angular momentum and the charge of the black hole under observation, as well as the observer's radial position and angle of elevation above the equatorial plane. Furthermore, his/her relative velocity compared to a standard observer can also be measured. On the other hand, the black hole shadow does not allow for a full parameter resolution in the case of a Kerr-Newman-Taub-NUT black hole, as a continuous degeneration relating specific angular momentum, electric charge, NUT charge and elevation angle exists in this case. We then use the celestial sphere to show that trapping is a generic feature of any black hole spacetime. In the last chapter we then prove a generalization of the mode stability result of Whiting (1989) for the Teukolsky equation for the case of real frequencies. The main result of the last chapter states that a separated solution of the Teukolsky equation governing massless test fields on the Kerr spacetime, which is purely outgoing at infinity, and purely ingoing at the horizon, must vanish. This has the consequence, that for real frequencies, there are linearly independent fundamental solutions of the radial Teukolsky equation which are purely ingoing at the horizon, and purely outgoing at infinity, respectively. This fact yields a representation formula for solutions of the inhomogenous Teukolsky equation, and was recently used by Shlapentokh-Rothman (2015) for the scalar wave equation. N2 - In Newtons Gravitationstheorie bewegt sich Licht auf geraden Linien durch den Raum. Entsprechend beeinflussen Massen den Verlauf von Lichtstrahlen nicht. In Einsteins Allgemeiner Relativitätstheorie führt die Präsenz von Massen dazu, dass sich die Raumzeit, sprich das Koordinatensystem für alle physikalischen Vorgänge, verkrümmt. Da das Licht immer den kürzesten Weg nimmt, wird es nun auch abgelenkt wenn es nahe an einem Körper mit grosser Masse vorbeikommt. Der Nachweis der Lichtablenkung durch die Masse der Sonne bei einer Sonnenfinsternis durch Eddington 1919 war der erste direkte Nachweis, dass Einstein mit seiner Allgemeinen Relativitätstheorie richtig liegt. Eine der erstaunlichsten Vorhersagen aus Einsteins Relativitätstheorie ist die Existenz von Schwarzen Löchern. Es wird gemeinhin angenommen, dass Schwarzen Löcher die dichtesten Objekte sind, welche im Universum existieren können. Ein Schwarzes Loch ist eine Raumzeit, die so stark verkrümmt ist, dass ein Bereich existiert aus welchem nicht einmal mehr Licht entfliehen kann. Die Grenze dieses Bereiches bezeichnet man als Ereignishorizont. Beobachter, welche den Ereignishorizont überqueren, können danach nicht mehr mit Beobachtern ausserhalb kommunizieren. Die Krümmung der Raumzeit in der Nähe des Ereignishorizontes ist so stark, dass sehr gewisse Lichtstrahlen, ähnlich der Planeten im Sonnensystem, auf Kreisbahnen bewegen. Das heisst, dass das Licht weder ins Schwarze Loch fällt, noch ins unendliche davon läuft. Die Bahn solcher Lichtstrahlen bezeichnet man als gefangene lichtartige Kurven. Solche Kurven existieren nur in einem beschränkten Bereich in der Nähe des Ereignishorizontes. Allerdings ist es an jedem Ort der Raumzeit möglich, lichtartige Kurven durch diesen Punkt zu finden, welche sich in der Zukunft einer gefangenen lichtartigen Kurve beliebig annähern und weder ins Schwarze Loch fallen noch ins unendliche davon laufen. Die Gesamtheit aller möglichen Lichtstrahlen durch einen Punkt kann durch eine Kugel, der Himmelssphäre des Beobachters, bestehend aus allen möglichen Raumrichtungen beschrieben werden. In unserer Arbeit zeigen wir, dass die Strahlen, welche sich in der Zukunft einer gefangenen lichtartigen Kurve annähern, die Himmelssphäre in zwei Bereiche unterteilt. Der eine Teil besteht aus jenen Richtungen, in welche der Lichtstrahl im Schwarzen Loch endet, der andere Teil aus jenen Richtungen in welche der Lichtstrahl ins unendliche davon läuft. Die Richtungen in welcher sich die Lichtstrahlen in der Zukunft einer gefangenen lichtartigen Kurve annähern bilden eine geschlossene Kurve auf der Himmelssphäre. Diese Kurve, zusammen mit den Richtungen unter welchen das Licht im Schwarzen Loch endet, bilden den Schatten des Schwarzen Loches auf der Himmelssphäre des Beobachters. Wir konnten zeigen, dass die Form dieses Schattens Rückschlüsse auf die physikalischen Parameter, wie Ladung und Drehmoment des Schwarzen Loches, sowie die Distanz zwischen Beobachter und Schwarzem Loch zulässt. Ausserdem haben wir gezeigt, dass für masselose Felder (Skalarfelder, elektromagnetische Felder, linearisierte Gravitation) auf Raumzeiten mit einem rotierenden Schwarzen Loch, die sogenannte Modenstabillität gilt. Modenlösungen für partielle Differentialgleichungen sind Lösungen, welche ein Produkt von Lösungen in einzelner Koordinatenrichtungen sind. Modenstäbilität bedeutet nun, dass es zu diesen Feldgleichungen, auf diesen Raumzeiten keine Modenlösungen mit realen Frequenzen gibt, welche nur Energie aus der Raumzeit hinaustragen. KW - black hole KW - trapping KW - black hole shadows KW - Teukolsky master equation KW - mode stability KW - Schwarzes Loch KW - gefangene lichtartige Kurven KW - Schatten eines Schwarzen Lochs KW - Teukolsky Gleichung KW - Moden Stabilität Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-414686 ER - TY - THES A1 - Wendi, Dadiyorto T1 - Recurrence Plots and Quantification Analysis of Flood Runoff Dynamics T1 - Rekurrenzplot und quantitativen Analyse von Hochwasserabflüssen Dynamik N2 - This paper introduces a novel measure to assess similarity between event hydrographs. It is based on Cross Recurrence Plots and Recurrence Quantification Analysis which have recently gained attention in a range of disciplines when dealing with complex systems. The method attempts to quantify the event runoff dynamics and is based on the time delay embedded phase space representation of discharge hydrographs. A phase space trajectory is reconstructed from the event hydrograph, and pairs of hydrographs are compared to each other based on the distance of their phase space trajectories. Time delay embedding allows considering the multi-dimensional relationships between different points in time within the event. Hence, the temporal succession of discharge values is taken into account, such as the impact of the initial conditions on the runoff event. We provide an introduction to Cross Recurrence Plots and discuss their parameterization. An application example based on flood time series demonstrates how the method can be used to measure the similarity or dissimilarity of events, and how it can be used to detect events with rare runoff dynamics. It is argued that this methods provides a more comprehensive approach to quantify hydrograph similarity compared to conventional hydrological signatures. N2 - Ziel dieser Arbeit ist es, eine Methode und einen umfassenden Index, die die Quantifizierung von Veränderungen in Hochwasserabflüssen über die Zeit ermöglichen, zu entwickeln. Als Proxydaten zur Detektion von Veränderungen dienen Abflusszeitreihen, da diese räumlich-zeitliche Änderungen von Prozessen im Einzugsgebiet integrieren. Einhergehend mit Veränderungen in den Rahmenbedingungen hydrologischer Systeme, beispielsweise Klimaänderungen, Veränderungen im Flussnetzwerk oder der Bodenbedeckung, sind Veränderungen in der Abflussdynamik zu erwarten. Urbanisierung, Klimawandel und veränderte wasserwirtschaftliche Nutzung können erheblichen Einfluss auf Hochwassercharakteristika haben, sodass die auf die abflussverursachenden Prozesse bezogene Hochwassertypologie obsolet wird. Außerdem kann es zur Überlagerung verschiedener Prozesse und der Bildung präzedenzloser Hochwasserdynamiken kommen. Üblicherweise wird seltenen Hochwasserereignissen eine über einen langen Zeitraum bestimmte Wiederkehrwahrscheinlichkeit zugewiesen. Allerdings wird die assoziierte Wiederkehrdauer häufig nur auf der Grundlage des Höchstwasserstandes ermittelt und ist nicht umfassend genug, um die unterschiedlichen Prozesstypen zu erfassen. Um umfassendere Abflussmerkmale in die Hochwassercharakterisierung aufzunehmen, wird die Charakterisierung der Abflussdynamik mittels der kontinuierlichen Gestalt des Hydrographen und als Kurve im Phasenraum empfohlen. Durch die Berücksichtigung des Taken‘schen Satzes zur Einbettung der Zeitverzögerung können ereignisbasierte Hydrographen weiter unterschieden werden. Dieser Ansatz nutzt die zeitliche Abfolge gemessener Abflusswerte, sodass der Einfluss der anfänglichen Werte auf das Hochwasserereignis als charakteristischer Vektor im multidimensionalen Phasenraum interpretiert werden kann. Im Rahmen dieser Arbeit wurden, erstmals im Bereich der Hydrologie, ‚Recurrence Plot‘ (RP) und ‚Recurrence Quantification Analysis‘ RQA eingesetzt, um die Seltenheit bzw. Ähnlichkeit von Abflussdynamiken zu visualisieren und identifizieren. Ebenso werden Anwendungsbeispiele im Bereich der Hydrologie, die das Konzept der Charakterisierung von Abflussdynamiken und den Nutzen des eingeführten Ähnlichkeitsindex verdeutlichen, vorgestellt. Außerdem wurde die Methodik weiterentwickelt und zeichnet sich nun durch erhöhte Robustheit gegenüber Störeinflüssen und eine bessere Anpassung an Abflussmessungen aus. Ein abschließendes Anwendungsbeispiel untersucht den in Dresden gemessenen Abfluss des ostdeutschen Elbe-Einzugsgebietes im Zeitraum von 1901 bis 2010. In dieser Studie werden Beispiele seltener und saisonunabhängiger Hochwasserereignisse, die durch ihre ungewöhnliche Abflussdynamik herausstechen, gezeigt und mit zugrundeliegenden abflussbildenden Prozessen in Verbindung gebracht. KW - Hydrograph Analysis KW - Time Embedded Phase Space KW - Rare and Unseasonal Flood KW - Non-stationary Flood Risk KW - Chaos Theory KW - Recurrence Plots KW - Flood Risk Big Data Mining KW - Flood Change KW - Non-linear Geoscience KW - Chaostheorie KW - Änderungen des Hochwassers KW - Big data mining zu Hochwasserrisiken KW - Analyse von Abflussganglinien KW - nichtlineare Geowissenschaften KW - nichtstationäres Hochwasserrisiko KW - seltenes und saisonunübliches Hochwasser KW - Rekurrenzplot KW - Phasenraum des Time Delay Embedding Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-431915 ER - TY - THES A1 - Rözer, Viktor T1 - Pluvial flood loss to private households T1 - Schäden durch urbane Sturzfluten in Privathaushalten N2 - Today, more than half of the world’s population lives in urban areas. With a high density of population and assets, urban areas are not only the economic, cultural and social hubs of every society, they are also highly susceptible to natural disasters. As a consequence of rising sea levels and an expected increase in extreme weather events caused by a changing climate in combination with growing cities, flooding is an increasing threat to many urban agglomerations around the globe. To mitigate the destructive consequences of flooding, appropriate risk management and adaptation strategies are required. So far, flood risk management in urban areas is almost exclusively focused on managing river and coastal flooding. Often overlooked is the risk from small-scale rainfall-triggered flooding, where the rainfall intensity of rainstorms exceeds the capacity of urban drainage systems, leading to immediate flooding. Referred to as pluvial flooding, this flood type exclusive to urban areas has caused severe losses in cities around the world. Without further intervention, losses from pluvial flooding are expected to increase in many urban areas due to an increase of impervious surfaces compounded with an aging drainage infrastructure and a projected increase in heavy precipitation events. While this requires the integration of pluvial flood risk into risk management plans, so far little is known about the adverse consequences of pluvial flooding due to a lack of both detailed data sets and studies on pluvial flood impacts. As a consequence, methods for reliably estimating pluvial flood losses, needed for pluvial flood risk assessment, are still missing. Therefore, this thesis investigates how pluvial flood losses to private households can be reliably estimated, based on an improved understanding of the drivers of pluvial flood loss. For this purpose, detailed data from pluvial flood-affected households was collected through structured telephone- and web-surveys following pluvial flood events in Germany and the Netherlands. Pluvial flood losses to households are the result of complex interactions between impact characteristics such as the water depth and a household’s resistance as determined by its risk awareness, preparedness, emergency response, building properties and other influencing factors. Both exploratory analysis and machine-learning approaches were used to analyze differences in resistance and impacts between households and their effects on the resulting losses. The comparison of case studies showed that the awareness around pluvial flooding among private households is quite low. Low awareness not only challenges the effective dissemination of early warnings, but was also found to influence the implementation of private precautionary measures. The latter were predominately implemented by households with previous experience of pluvial flooding. Even cases where previous flood events affected a different part of the same city did not lead to an increase in preparedness of the surveyed households, highlighting the need to account for small-scale variability in both impact and resistance parameters when assessing pluvial flood risk. While it was concluded that the combination of low awareness, ineffective early warning and the fact that only a minority of buildings were adapted to pluvial flooding impaired the coping capacities of private households, the often low water levels still enabled households to mitigate or even prevent losses through a timely and effective emergency response. These findings were confirmed by the detection of loss-influencing variables, showing that cases in which households were able to prevent any loss to the building structure are predominately explained by resistance variables such as the household’s risk awareness, while the degree of loss is mainly explained by impact variables. Based on the important loss-influencing variables detected, different flood loss models were developed. Similar to flood loss models for river floods, the empirical data from the preceding data collection was used to train flood loss models describing the relationship between impact and resistance parameters and the resulting loss to building structures. Different approaches were adapted from river flood loss models using both models with the water depth as only predictor for building structure loss and models incorporating additional variables from the preceding variable detection routine. The high predictive errors of all compared models showed that point predictions are not suitable for estimating losses on the building level, as they severely impair the reliability of the estimates. For that reason, a new probabilistic framework based on Bayesian inference was introduced that is able to provide predictive distributions instead of single loss estimates. These distributions not only give a range of probable losses, they also provide information on how likely a specific loss value is, representing the uncertainty in the loss estimate. Using probabilistic loss models, it was found that the certainty and reliability of a loss estimate on the building level is not only determined by the use of additional predictors as shown in previous studies, but also by the choice of response distribution defining the shape of the predictive distribution. Here, a mix between a beta and a Bernoulli distribution to account for households that are able to prevent losses to their building’s structure was found to provide significantly more certain and reliable estimates than previous approaches using Gaussian or non-parametric response distributions. The successful model transfer and post-event application to estimate building structure loss in Houston, TX, caused by pluvial flooding during Hurricane Harvey confirmed previous findings, and demonstrated the potential of the newly developed multi-variable beta model for future risk assessments. The highly detailed input data set constructed from openly available data sources containing over 304,000 affected buildings in Harris County further showed the potential of data-driven, building-level loss models for pluvial flood risk assessment. In conclusion, pluvial flood losses to private households are the result of complex interactions between impact and resistance variables, which should be represented in loss models. The local occurrence of pluvial floods requires loss estimates on high spatial resolutions, i.e. on the building level, where losses are variable and uncertainties are high. Therefore, probabilistic loss estimates describing the uncertainty of the estimate should be used instead of point predictions. While the performance of probabilistic models on the building level are mainly driven by the choice of response distribution, multi-variable models are recommended for two reasons: First, additional resistance variables improve the detection of cases in which households were able to prevent structural losses. Second, the added variability of additional predictors provides a better representation of the uncertainties when loss estimates from multiple buildings are aggregated. This leads to the conclusion that data-driven probabilistic loss models on the building level allow for a reliable loss estimation at an unprecedented level of detail, with a consistent quantification of uncertainties on all aggregation levels. This makes the presented approach suitable for a wide range of applications, from decision support in spatial planning to impact- based early warning systems. N2 - Über die Hälfte der Weltbevölkerung lebt heute in Städten. Mit einer hohen Dichte an Menschen, Gütern und Gebäuden sind Städte nicht nur die wirtschaftlichen, politischen und kulturellen Zentren einer Gesellschaft, sondern auch besonders anfällig gegenüber Naturkatastrophen. Insbesondere Hochwasser und Überflutungen stellen in Folge von steigenden Meeresspiegeln und einer erwarteten Zunahme von Extremwettereignissen eine wachsende Bedrohung in vielen Regionen dar. Um die möglichen Folgen dieser Entwicklung zu vermeiden bzw. zu reduzieren, ist es notwendig sich der steigenden Gefahr durch geeignete Maßnahmen anzupassen. Bisher ist der Hochwasserschutz in Städten beinahe ausschließlich auf Überflutungen durch Flusshochwasser oder Sturmfluten fokussiert. Dabei werden sogenannte urbane Sturzfluten, die in den letzten Jahren vermehrt zu hohen Schäden in Städten geführt haben, nicht berücksichtigt. Bei urbanen Sturzfluten führen lokale Starkniederschläge mit hohen Regenmengen zu einer Überlastung des städtischen Abwassersystems und damit zu einer direkten, oft kleinräumigen Überflutung innerhalb eines bebauten Gebiets. Mit einer prognostizierten Zunahme von Starkniederschlägen, sowie einer baulichen Verdichtung und damit einhergehender Flächenversiegelung in vielen Städten, ist mit einer Zunahme von urbanen Sturzfluten zu rechnen. Dies verlangt die Einbindung des Risikos durch urbane Sturzfluten in bestehende Hochwasserschutzkonzepte. Bisher fehlen allerdings sowohl detaillierte Daten als auch Methoden um das Risiko durch urbane Sturzfluten und die dadurch verursachten Schäden, etwa an Wohngebäuden, zuverlässig abzuschätzen. Aus diesem Grund beschäftigt sich diese Arbeit hauptsächlich mit der Entwicklung von Verfahren und Modellen zur Abschätzung von Schäden an Privathaushalten durch urbane Sturzfluten. Dazu wurden detaillierte Daten durch Telefon- und Online-Umfragen nach urbanen Sturzflutereignissen in Deutschland und in den Niederlanden erhoben und ausgewertet. Die Erkenntnisse aus den detaillierten Analysen zu Vorsorge, Notmaßnahmen und Wiederherstellung, vor, während und nach urbanen Sturzflutereignissen, wurden genutzt um eine neue Methode zur Schätzung von Schäden an Wohngebäuden zu entwickeln. Dabei werden neben Angaben wie Dauer und Höhe der Überflutung, auch Eigenschaften von Haushalten, wie etwa deren Risikobewusstsein, in die Schätzung miteinbezogen. Nach lokaler Validierung wurde die neuentwickelte Methode beispielhaft zur Schätzung von Wohngebäudeschäden nach einem urbanen Sturzflutereignis im Großraum Houston (Texas, USA) erfolgreich angewendet. Anders als bei bisherigen Ansätzen wird der geschätzte Schaden eines Wohngebäudes nicht als einzelner Wert angegeben, sondern als Verteilung, welche die Bandbreite möglicher Schäden und deren Wahrscheinlichkeit angibt. Damit konnte die Zuverlässigkeit von Schadensschätzungen im Vergleich zu bisherigen Verfahren erheblich verbessert werden. Durch die erfolgreiche Anwendung sowohl auf der Ebene einzelner Gebäude als auch für gesamte Städte, ergibt sich ein breites Spektrum an Nutzungsmöglichkeiten, etwa als Entscheidungsunterstützung in der Stadtplanung oder für eine verbesserte Frühwarnung vor urbanen Sturzfluten. KW - Schadensmodellierung KW - Unsicherheiten KW - Starkregen KW - Privathaushalte KW - damage modeling KW - economic impacts KW - uncertainty KW - private households KW - probabilistic KW - pluvial flooding Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-429910 ER - TY - THES A1 - Angermann, Lisa T1 - Hillslope-stream connectivity across scales T1 - Mehrskalige Untersuchung der Hang-Bach Konnektivität N2 - The concept of hydrologic connectivity summarizes all flow processes that link separate regions of a landscape. As such, it is a central theme in the field of catchment hydrology, with influence on neighboring disciplines such as ecology and geomorphology. It is widely acknowledged to be an important key in understanding the response behavior of a catchment and has at the same time inspired research on internal processes over a broad range of scales. From this process-hydrological point of view, hydrological connectivity is the conceptual framework to link local observations across space and scales. This is the context in which the four studies this thesis comprises of were conducted. The focus was on structures and their spatial organization as important control on preferential subsurface flow. Each experiment covered a part of the conceptualized flow path from hillslopes to the stream: soil profile, hillslope, riparian zone, and stream. For each study site, the most characteristic structures of the investigated domain and scale, such as slope deposits and peat layers were identified based on preliminary or previous investigations or literature reviews. Additionally, further structural data was collected and topographical analyses were carried out. Flow processes were observed either based on response observations (soil moisture changes or discharge patterns) or direct measurement (advective heat transport). Based on these data, the flow-relevance of the characteristic structures was evaluated, especially with regard to hillslope to stream connectivity. Results of the four studies revealed a clear relationship between characteristic spatial structures and the hydrological behavior of the catchment. Especially the spatial distribution of structures throughout the study domain and their interconnectedness were crucial for the establishment of preferential flow paths and their relevance for large-scale processes. Plot and hillslope-scale irrigation experiments showed that the macropores of a heterogeneous, skeletal soil enabled preferential flow paths at the scale of centimeters through the otherwise unsaturated soil. These flow paths connected throughout the soil column and across the hillslope and facilitated substantial amounts of vertical and lateral flow through periglacial slope deposits. In the riparian zone of the same headwater catchment, the connectivity between hillslopes and stream was controlled by topography and the dualism between characteristic subsurface structures and the geomorphological heterogeneity of the stream channel. At the small scale (1 m to 10 m) highest gains always occurred at steps along the longitudinal streambed profile, which also controlled discharge patterns at the large scale (100 m) during base flow conditions (number of steps per section). During medium and high flow conditions, however, the impact of topography and parafluvial flow through riparian zone structures prevailed and dominated the large-scale response patterns. In the streambed of a lowland river, low permeability peat layers affected the connectivity between surface water and groundwater, but also between surface water and the hyporheic zone. The crucial factor was not the permeability of the streambed itself, but rather the spatial arrangement of flow-impeding peat layers, causing increased vertical flow through narrow “windows” in contrast to predominantly lateral flow in extended areas of high hydraulic conductivity sediments. These results show that the spatial organization of structures was an important control for hydrological processes at all scales and study areas. In a final step, the observations from different scales and catchment elements were put in relation and compared. The main focus was on the theoretical analysis of the scale hierarchies of structures and processes and the direction of causal dependencies in this context. Based on the resulting hierarchical structure, a conceptual framework was developed which is capable of representing the system’s complexity while allowing for adequate simplifications. The resulting concept of the parabolic scale series is based on the insight that flow processes in the terrestrial part of the catchment (soil and hillslopes) converge. This means that small-scale processes assemble and form large-scale processes and responses. Processes in the riparian zone and the streambed, however, are not well represented by the idea of convergence. Here, the large-scale catchment signal arrives and is modified by structures in the riparian zone, stream morphology, and the small-scale interactions between surface water and groundwater. Flow paths diverge and processes can better be represented by proceeding from large scales to smaller ones. The catchment-scale representation of processes and structures is thus the conceptual link between terrestrial hillslope processes and processes in the riparian corridor. N2 - Das Konzept der hydrologischen Konnektivität umfasst alle Fließprozesse, welche verschiedene Bereiche einer Landschaft verbinden. Als solches ist es ein zentrales Thema in dem Forschungsbereich der Einzugsgebietshydrologie und beeinflusst auch benachbarte Disziplinen wie die Ökologie oder die Geomorphologie. Es ist allgemein akzeptiert, dass das Konzept der Konnektivität ein wichtiger Schlüssel zum Verständnis von Einzugsgebietsdynamiken ist, gleichzeitig inspiriert es die Erforschung interner Prozesse auf verschiedenen Skalen. Von dieser prozesshydrologischen Perspektive gesehen, bietet Konnektivität einen konzeptionellen Rahmen, um lokale Beobachtungen über Raum und Skalen miteinander in Verbindung zu setzen. In diesem Kontext stehen die vier Studien dieser Doktorarbeit. Der Fokus lag dabei auf räumlichen Strukturen als wichtigem Kontrollfaktor für präferentielle Fließpfade als spezieller Form unterirdischer Fließprozesse. Die Experimente deckten dabei je einen Abschnitt des konzeptionellen Fließweges vom Hang zum Bach exemplarisch ab: Bodenprofil und Hang, Hang und Auenbreich, und Bachbett. Für alle vier Studien wurden zunächst charakteristische Strukturen des Untersuchungsgebietes wie Schuttablagerungen am Hang oder Torfschichten im Flussbett auf Basis vorausgehender Untersuchungen und Literaturrecherchen identifiziert. Zusätzlich wurden weitere strukturelle Daten erfasst und digitale Geländemodelle ausgewertet. Anschließend wurde die Prozessrelevanz dieser Strukturen, vor allem im Hinblick auf die Hang-Bach-Konnektivität, untersucht. Die Ergebnisse der einzelnen Studien zeigten eine deutliche Verbindung zwischen den charakteristischen räumlichen Strukturen und dem hydrologischen Verhalten des untersuchten Gebietes. Insbesondere die räumliche Anordnung von Strukturen, d.h. die räumliche Verteilung und der Grad der Konnektivität der Strukturen, war ausschlaggebend für die Ausbildung präferenzieller Fließpfade und deren Relevanz für größerskalige Prozesse. Die räumliche Organisation von Strukturen war in allen Untersuchungsgebieten ein wichtiger Kontrollfaktor für hydrologische Prozesse. Die Beobachtungen auf verschiedenen Skalen und verschiedener Fließpfadabschnitte wurden miteinander in Verbindung gesetzt und verglichen. Besonderes Augenmerk lag dabei auf der theoretischen Analyse der Skalenhierarchie von Strukturen und Prozessen und der Richtung der Kausalität in diesem Zusammenhang. Auf dieser Grundlage wurde als Synthese der einzelnen Studien ein Konzept entwickelt, welches in der Lage ist, die Komplexität eines Einzugsgebietes abzubilden und gleichzeitig adequate Vereinfachungen zuzulassen. Diese Konzept der parabelförmigen Skalenabfolge beruht auf der Erkenntnis, dass Fließprozesse im terrestrischen Bereich eines Einzugsgebietes, also im Boden und den Hängen, vorwiegend konvergieren und sich von der kleinen Skala zur größeren hin zusammenfügen. Die Prozesse in der Aue und dem Bachbett werden von diesem Prinzip der Konvergenz allerding nicht abgebildet. Die in den Böden und an den Hängen erzeugten Fließmuster des Einzugsgebiets werden von den Strukturen in der Aue, der Morphologie des Baches und den kleinskaligen Wechselwirkungen zwischen Fließgewässer und Sediment überprägt. Die Fließprozesse divergieren, und eine Beschreibung von der großen Skala hin zur kleineren ist hier besser geeignet. Die räumlich diskrete oder konzeptionelle Darstellung von Prozessen auf der Einzugsgebietsskala bietet so die Verbindung zwischen terrestrischer Hanghydrologie und der bachseitigen Auenhydrologie. KW - catchment hydrology KW - hillslope hydrology KW - riparian zone KW - hyporheic zone KW - Einzugsgebietshydrologie KW - Hanghydrologie KW - Auenbereich KW - hyporheische Zone Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-424542 ER - TY - THES A1 - Mbaya Mani, Christian T1 - Functional nanoporous carbon-based materials derived from oxocarbon-metal coordination complexes T1 - Funktionale nanoporöse Kohlenstoffmaterialien auf Basis von Oxokohlenstoff-Metal Koordinationskomplexe N2 - Nanoporous carbon based materials are of particular interest for both science and industry due to their exceptional properties such as a large surface area, high pore volume, high electroconductivity as well as high chemical and thermal stability. Benefiting from these advantageous properties, nanoporous carbons proved to be useful in various energy and environment related applications including energy storage and conversion, catalysis, gas sorption and separation technologies. The synthesis of nanoporous carbons classically involves thermal carbonization of the carbon precursors (e.g. phenolic resins, polyacrylonitrile, poly(vinyl alcohol) etc.) followed by an activation step and/or it makes use of classical hard or soft templates to obtain well-defined porous structures. However, these synthesis strategies are complicated and costly; and make use of hazardous chemicals, hindering their application for large-scale production. Furthermore, control over the carbon materials properties is challenging owing to the relatively unpredictable processes at the high carbonization temperatures. In the present thesis, nanoporous carbon based materials are prepared by the direct heat treatment of crystalline precursor materials with pre-defined properties. This synthesis strategy does not require any additional carbon sources or classical hard- or soft templates. The highly stable and porous crystalline precursors are based on coordination compounds of the squarate and croconate ions with various divalent metal ions including Zn2+, Cu2+, Ni2+, and Co2+, respectively. Here, the structural properties of the crystals can be controlled by the choice of appropriate synthesis conditions such as the crystal aging temperature, the ligand/metal molar ratio, the metal ion, and the organic ligand system. In this context, the coordination of the squarate ions to Zn2+ yields porous 3D cube crystalline particles. The morphology of the cubes can be tuned from densely packed cubes with a smooth surface to cubes with intriguing micrometer-sized openings and voids which evolve on the centers of the low index faces as the crystal aging temperature is raised. By varying the molar ratio, the particle shape can be changed from truncated cubes to perfect cubes with right-angled edges. These crystalline precursors can be easily transformed into the respective carbon based materials by heat treatment at elevated temperatures in a nitrogen atmosphere followed by a facile washing step. The resulting carbons are obtained in good yields and possess a hierarchical pore structure with well-organized and interconnected micro-, meso- and macropores. Moreover, high surface areas and large pore volumes of up to 1957 m2 g-1 and 2.31 cm3 g-1 are achieved, respectively, whereby the macroscopic structure of the precursors is preserved throughout the whole synthesis procedure. Owing to these advantageous properties, the resulting carbon based materials represent promising supercapacitor electrode materials for energy storage applications. This is exemplarily demonstrated by employing the 3D hierarchical porous carbon cubes derived from squarate-zinc coordination compounds as electrode material showing a specific capacitance of 133 F g-1 in H2SO4 at a scan rate of 5 mV s-1 and retaining 67% of this specific capacitance when the scan rate is increased to 200 mV s-1. In a further application, the porous carbon cubes derived from squarate-zinc coordination compounds are used as high surface area support material and decorated with nickel nanoparticles via an incipient wetness impregnation. The resulting composite material combines a high surface area, a hierarchical pore structure with high functionality and well-accessible pores. Moreover, owing to their regular micro-cube shape, they allow for a good packing of a fixed-bed flow reactor along with high column efficiency and a minimized pressure drop throughout the packed reactor. Therefore, the composite is employed as heterogeneous catalyst in the selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran showing good catalytic performance and overcoming the conventional problem of column blocking. Thinking about the rational design of 3D carbon geometries, the functions and properties of the resulting carbon-based materials can be further expanded by the rational introduction of heteroatoms (e.g. N, B, S, P, etc.) into the carbon structures in order to alter properties such as wettability, surface polarity as well as the electrochemical landscape. In this context, the use of crystalline materials based on oxocarbon-metal ion complexes can open a platform of highly functional materials for all processes that involve surface processes. N2 - Nanoporöse Kohlenstoffmaterialien zeichnen sich u. a. durch ihre außergewöhnlichen Eigenschaften aus wie z. B. hohe Oberfläche, hohes Porenvolumen, hohe elektrische Leitfähigkeit und auch hohe chemische und thermische Stabilität. Aufgrund dessen finden sie Anwendung in den unterschiedlichsten Bereichen von der Speicherung elektrischer Energie bis hin zur Katalyse und Gasspeicherung. Die klassische Synthese von porösen Kohlenstoffmaterialien basiert u. a. auf der Nutzung von sogenannten anorganischen bzw. organischen Templaten und/oder chemischen Aktivierungsagenzien. Allerdings gelten diese Methoden eher als kompliziert, kostspielig und umweltschädlich. Außerdem wird eine gezielte Kontrolle der Produkteigenschaften durch die zahlreichen Prozesse erschwert, die sich bei den hohen Karbonisierungstemperaturen abspielen und folglich die Materialeigenschaften unvorhersehbar verändern können. In der vorliegenden Arbeit wird ein alternatives Konzept für die Synthese von nanoporösen Kohlenstoffmaterialien mit gezielt einstellbaren Eigenschaften vorgestellt. Diese basiert auf der Nutzung von kristallinen Vorläufermaterialien, die aus der Koordination von den Anionen der Quadratsäure bzw. der Krokonsäure mit verschiedenen Metallionen (Zn2+, Cu2+, Ni2+ und Co2+) resultieren. Diese haben den Vorteil, dass Eigenschaften wie z. B. die Partikelmorphologie und Porosität gezielt durch die Wahl geeigneter Syntheseparameter (z. B. Temperatur, molares Verhältnis, Metallion und Ligand) eingestellt werden können. Beispielsweise führen Koordinationskomplexe von der Quadratsäure mit Zn2+ in Wasser zu porösen 3D würfelförmigen Mikrokristallen, die durch einfache thermische Behandlung unter Schutzgasatmosphäre zu den entsprechenden Kompositen umgewandelt werden. Ein anschließender Waschschritt führt zu den entsprechenden Kohlenstoffmaterialien unter Erhalt der makroskopischen Struktur der kristallinen Vorläufermaterialien. In diesem Zusammenhang weisen die resultierenden Kohlenstoffe ebenfalls eine 3D Würfelform mit einer hierarchischen Porenstruktur bestehend aus vernetzten Mikro-, Meso- und Makroporen auf. Ferner besitzen die Kohlenstoffe hohe Oberflächen und Porenvolumen von bis zu 1.957 m2 g-1 bzw. 2,31 cm3 g-1. Um die Vorteile dieser Eigenschaften zu demonstrieren, werden sie als Elektrodenmaterial für Superkondensatoren getestet und zeigen dabei vielversprechende Kapazitäten. Außerdem, werden sie auch als Trägermaterial für die Immobilisierung von Nickel-Nanopartikel verwendet und als heterogene Katalysatoren in der selektiven Hydrierung von 5-hydroxymethylfurfural zu 2,5-dimethylfuran in einem Festbettreaktor eingesetzt. Dabei wird eine gute Katalysatorleistung (Produktivität) bei minimalem Druckabfall in der Reaktorsäule erreicht. KW - squaric acid KW - Quadratsäure KW - mesocrystals KW - Mesokristalle KW - nanoporöser Kohlenstoffpartikel KW - nanoporous carbon particles KW - Nanopartikel KW - nanoparticles KW - Koordinationskomplexe KW - coordination complexes KW - oxocarbon KW - Oxo-Kohlenstoff Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-407866 ER - TY - THES A1 - Golly, Antonius T1 - Formation and evolution of channel steps and their role for sediment dynamics in a steep mountain stream T1 - Formation und Evolution von Bachstufen und ihr Einfluss auf die Sedimentdynamik eines steilen Gebirgseinzugsgebietes N2 - Steep mountain channels are an important component of the fluvial system. On geological timescales, they shape mountain belts and counteract tectonic uplift by erosion. Their channels are strongly coupled to hillslopes and they are often the main source of sediment transported downstream to low-gradient rivers and to alluvial fans, where commonly settlements in mountainous areas are located. Hence, mountain streams are the cause for one of the main natural hazards in these regions. Due to climate change and a pronounced populating of mountainous regions the attention given to this threat is even growing. Although quantitative studies on sediment transport have significantly advanced our knowledge on measuring and calibration techniques we still lack studies of the processes within mountain catchments. Studies examining the mechanisms of energy and mass exchange on small temporal and spatial scales in steep streams remain sparse in comparison to low-gradient alluvial channels. In the beginning of this doctoral project, a vast amount of experience and knowledge of a steep stream in the Swiss Prealps had to be consolidated in order to shape the principal aim of this research effort. It became obvious, that observations from within the catchment are underrepresented in comparison to experiments performed at the catchment’s outlet measuring fluxes and the effects of the transported material. To counteract this imbalance, an examination of mass fluxes within the catchment on the process scale was intended. Hence, this thesis is heavily based on direct field observations, which are generally rare in these environments in quantity and quality. The first objective was to investigate the coupling of the channel with surrounding hillslopes, the major sources of sediment. This research, which involved the monitoring of the channel and adjacent hillslopes, revealed that alluvial channel steps play a key role in coupling of channel and hillslopes. The observations showed that hillslope stability is strongly associated with the step presence and an understanding of step morphology and stability is therefore crucial in understanding sediment mobilization. This finding refined the way we think about the sediment dynamics in steep channels and motivated continued research of the step dynamics. However, soon it became obvious that the technological basis for developing field tests and analyzing the high resolution geometry measured in the field was not available. Moreover, for many geometrical quantities in mountain channels definitions and a clear scientific standard was not available. For example, these streams are characterized by a high spatial variability of the channel banks, preventing straightforward calculations of the channel width without a defined reference. Thus, the second and inevitable part of this thesis became the development and evaluation of scientific tools in order to investigate the geometrical content of the study reach thoroughly. The developed framework allowed the derivation of various metrics of step and channel geometry which facilitated research on the a large data set of observations of channel steps. In the third part, innovative, physically-based metrics have been developed and compared to current knowledge on step formation, suggested in the literature. With this analyses it could be demonstrated that the formation of channel steps follow a wide range of hydraulic controls. Due to the wide range of tested parameters channel steps observed in a natural stream were attributed to different mechanisms of step formation, including those based on jamming and those based on key-stones. This study extended our knowledge on step formation in a steep stream and harmonized different, often time seen as competing, processes of step formation. This study was based on observations collected at one point in time. In the fourth part of this project, the findings of the snap-shot observations were extended in the temporal dimension and the derived concepts have been utilized to investigate reach-scale step patterns in response to large, exceptional flood events. The preliminary results of this work based on the long-term analyses of 7 years of long profile surveys showed that the previously observed channel-hillslope mechanism is the responsible for the short-term response of step formation. The findings of the long-term analyses of step patterns drew a bow to the initial observations of a channel-hillslope system which allowed to join the dots in the dynamics of steep stream. Thus, in this thesis a broad approach has been chosen to gain insights into the complex system of steep mountain rivers. The effort includes in situ field observations (article I), the development of quantitative scientific tools (article II), the reach-scale analyses of step-pool morphology (article III) and its temporal evolution (article IV). With this work our view on the processes within the catchment has been advanced towards a better mechanistic understanding of these fluvial system relevant to improve applied scientific work. N2 - Gebirgsbäche sind stark gekoppelt mit angrenzenden Hängen, welche eine Hauptquelle von Sediment darstellen. Dieses Sediment wird durch erosive Prozesse weiter im fluvialen System stromabwärts transportiert, häufig auch in Bereiche alpiner Besiedlung. Das transportierte Sediment kann dort verheerende Schäden an Gebäuden und Infrastruktur anrichten. Daher stellen Gebirgsbäche eine Hauptursache für Naturgefahren in steilen Regionen dar, welche durch den Wandel des Klimas und die fortschreitende Besiedlung durch den Menschen noch verstärkt werden. Wenngleich quantitative Studien unser Wissen über Mess- und Kalibrierungstechniken zur Erfassung von Sedimenttransport erweitert haben, so sind doch viele Prozesse innerhalb der Einzugsgebiete in Hinblick auf Erosion und Sedimentverfügbarkeit weitgehend unerforscht. So stellen Beobachtungen von Mechanismen von Energie- und Massenaustausch auf kleinen räumlichen und zeitlichen Skalen innerhalb steiler Gebirgseinzugsgebiete eine Ausname dar. Diese Doktorarbeit basiert auf hoch-qualitativen Feldbeobachtungen in einem schweizer Gebirgsbach um Forschungsfragen in Hinblick auf die Sediementdyanmik zu behandeln. Das erste Ziel war es, die Gerinne-Hang-Kopplung zu erforschen und zu verstehen, um mögliche Sedimentquellen zu identifizieren, sowie die Mechanismen und Prozesse der Sedimentgenerierung in den Kontext der allgemeinen Dynamik von Gebirgsbächen zu bringen. Die erste Studie, welche auf visuellen Beobachtungen basiert, offenbarte eine Schlüsselrolle von Bachstufen in der Gerinne-Hang-Kopplung. Auf dieser Grundlage wurde ein konzeptuelles Modell entwickelt (Artikel I): durch die Erosion von Bachstufen werden angrenzende Hänge destabilisiert und ermöglichen anhaltenden Sedimenteintrag. Diese Forschung regte eine genauere Beobachtung der räumlichen und zeitlichen Evolution von Bachstufen an. Die weitere Forschung erforderte jedoch neue technologische Werkzeuge und Methoden welche zunächst in dieser Doktorarbeit eigens entwickelt wurden (Artikel II). Mit diesen Werkzeugen wurde dann ein Datensatz eingemessener Bachstufen in Hinblick auf den Formationsprozess analysiert (Artikel III). Mit dieser Analyse konnten verschiedene Stufenbildungstheorien überprüft und und zwei dominante Mechanismen verifiziert werden: Bachstufen formen sich in engen und verengenden Bachabchnitten durch Verklemmung, sowie in breiten und breiter werdenden Abschnitten durch die Ablagerung von Schlüsselsteinen. Durch diese Beobachtung wurde unser Wissen über Stufenbildung erweitert indem verschiedene hypothetisierte Mechanismen in einem Gebirgsbach harmonisiert wurden. Zu guter Letzt wurde diese Punktbeobachtung schließlich in den zeitlichen Kontext gesetzt, indem die Muster von Bachstufen über 7 Jahre nach einem hydrologischen Großereignis in 2010 untersucht wurden (Artikel IV). Die vorläufigen Ergebnisse zeigen, dass Großereignisse einen erheblichen Einfluss auf die Gerinnebreite haben: sowohl die räumlich gemittelte Gerinnebreite, als auch die mittlere Gerinnebreite an Bachstufen ist unmittelbar nach dem Großereignis deutlich erhöht. Weiterhin ist die relative Anzahl der Bachstufen welche durch Schlüsselsteine erzeugt werden größer nach dem Großereignis. Dies deutet darauf hin, dass der zuerst beobachtete Mechanismus der Gerinne-Hang-Kopplung (Artikel I) verantwortlich ist für die zeitliche Evolution der Bachstufen nach Großereignissen (Artikel IV). KW - Geomorphologie KW - geomorphology KW - Naturgefahren KW - natural hazards KW - Gebirgsbäche KW - mountain rivers KW - Geschiebetransport KW - bedload transport KW - Bachstufen KW - channel steps KW - Gerinne-Hang-Kopplung KW - channel-hillslope coupling Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-411728 ER -