TY - BOOK A1 - Draisbach, Uwe A1 - Naumann, Felix A1 - Szott, Sascha A1 - Wonneberg, Oliver T1 - Adaptive windows for duplicate detection N2 - Duplicate detection is the task of identifying all groups of records within a data set that represent the same real-world entity, respectively. This task is difficult, because (i) representations might differ slightly, so some similarity measure must be defined to compare pairs of records and (ii) data sets might have a high volume making a pair-wise comparison of all records infeasible. To tackle the second problem, many algorithms have been suggested that partition the data set and compare all record pairs only within each partition. One well-known such approach is the Sorted Neighborhood Method (SNM), which sorts the data according to some key and then advances a window over the data comparing only records that appear within the same window. We propose several variations of SNM that have in common a varying window size and advancement. The general intuition of such adaptive windows is that there might be regions of high similarity suggesting a larger window size and regions of lower similarity suggesting a smaller window size. We propose and thoroughly evaluate several adaption strategies, some of which are provably better than the original SNM in terms of efficiency (same results with fewer comparisons). N2 - Duplikaterkennung beschreibt das Auffinden von mehreren Datensätzen, die das gleiche Realwelt-Objekt repräsentieren. Diese Aufgabe ist nicht trivial, da sich (i) die Datensätze geringfügig unterscheiden können, so dass Ähnlichkeitsmaße für einen paarweisen Vergleich benötigt werden, und (ii) aufgrund der Datenmenge ein vollständiger, paarweiser Vergleich nicht möglich ist. Zur Lösung des zweiten Problems existieren verschiedene Algorithmen, die die Datenmenge partitionieren und nur noch innerhalb der Partitionen Vergleiche durchführen. Einer dieser Algorithmen ist die Sorted-Neighborhood-Methode (SNM), welche Daten anhand eines Schlüssels sortiert und dann ein Fenster über die sortierten Daten schiebt. Vergleiche werden nur innerhalb dieses Fensters durchgeführt. Wir beschreiben verschiedene Variationen der Sorted-Neighborhood-Methode, die auf variierenden Fenstergrößen basieren. Diese Ansätze basieren auf der Intuition, dass Bereiche mit größerer und geringerer Ähnlichkeiten innerhalb der sortierten Datensätze existieren, für die entsprechend größere bzw. kleinere Fenstergrößen sinnvoll sind. Wir beschreiben und evaluieren verschiedene Adaptierungs-Strategien, von denen nachweislich einige bezüglich Effizienz besser sind als die originale Sorted-Neighborhood-Methode (gleiches Ergebnis bei weniger Vergleichen). T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 49 KW - Informationssysteme KW - Datenqualität KW - Datenintegration KW - Duplikaterkennung KW - Duplicate Detection KW - Data Quality KW - Data Integration KW - Information Systems Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53007 SN - 978-3-86956-143-1 SN - 1613-5652 SN - 2191-1665 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Smirnov, Sergey A1 - Reijers, Hajo A. A1 - Nugteren, Thijs A1 - Weske, Mathias T1 - Business process model abstraction : theory and practice N2 - Business process management aims at capturing, understanding, and improving work in organizations. The central artifacts are process models, which serve different purposes. Detailed process models are used to analyze concrete working procedures, while high-level models show, for instance, handovers between departments. To provide different views on process models, business process model abstraction has emerged. While several approaches have been proposed, a number of abstraction use case that are both relevant for industry and scientifically challenging are yet to be addressed. In this paper we systematically develop, classify, and consolidate different use cases for business process model abstraction. The reported work is based on a study with BPM users in the health insurance sector and validated with a BPM consultancy company and a large BPM vendor. The identified fifteen abstraction use cases reflect the industry demand. The related work on business process model abstraction is evaluated against the use cases, which leads to a research agenda. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 35 Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41782 SN - 978-3-86956-054-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Krause, Christian A1 - Giese, Holger T1 - Quantitative modeling and analysis of service-oriented real-time systems using interval probabilistic timed automata N2 - One of the key challenges in service-oriented systems engineering is the prediction and assurance of non-functional properties, such as the reliability and the availability of composite interorganizational services. Such systems are often characterized by a variety of inherent uncertainties, which must be addressed in the modeling and the analysis approach. The different relevant types of uncertainties can be categorized into (1) epistemic uncertainties due to incomplete knowledge and (2) randomization as explicitly used in protocols or as a result of physical processes. In this report, we study a probabilistic timed model which allows us to quantitatively reason about nonfunctional properties for a restricted class of service-oriented real-time systems using formal methods. To properly motivate the choice for the used approach, we devise a requirements catalogue for the modeling and the analysis of probabilistic real-time systems with uncertainties and provide evidence that the uncertainties of type (1) and (2) in the targeted systems have a major impact on the used models and require distinguished analysis approaches. The formal model we use in this report are Interval Probabilistic Timed Automata (IPTA). Based on the outlined requirements, we give evidence that this model provides both enough expressiveness for a realistic and modular specifiation of the targeted class of systems, and suitable formal methods for analyzing properties, such as safety and reliability properties in a quantitative manner. As technical means for the quantitative analysis, we build on probabilistic model checking, specifically on probabilistic time-bounded reachability analysis and computation of expected reachability rewards and costs. To carry out the quantitative analysis using probabilistic model checking, we developed an extension of the Prism tool for modeling and analyzing IPTA. Our extension of Prism introduces a means for modeling probabilistic uncertainty in the form of probability intervals, as required for IPTA. For analyzing IPTA, our Prism extension moreover adds support for probabilistic reachability checking and computation of expected rewards and costs. We discuss the performance of our extended version of Prism and compare the interval-based IPTA approach to models with fixed probabilities. N2 - Eine der wichtigsten Herausforderungen in der Entwicklung von Service-orientierten Systemen ist die Vorhersage und die Zusicherung von nicht-funktionalen Eigenschaften, wie Ausfallsicherheit und Verfügbarkeit von zusammengesetzten, interorganisationellen Diensten. Diese Systeme sind oft charakterisiert durch eine Vielzahl von inhärenten Unsicherheiten, welche sowohl in der Modellierung als auch in der Analyse eine Rolle spielen. Die verschiedenen relevanten Arten von Unsicherheiten können eingeteilt werden in (1) epistemische Unsicherheiten aufgrund von unvollständigem Wissen und (2) Zufall als Mittel in Protokollen oder als Resultat von physikalischen Prozessen. In diesem Bericht wird ein probabilistisches, Zeit-behaftetes Modell untersucht, welches es ermöglicht quantitative Aussagen über nicht-funktionale Eigenschaften von einer eingeschränkten Klasse von Service-orientierten Echtzeitsystemen mittels formaler Methoden zu treffen. Zur Motivation und Einordnung wird ein Anforderungskatalog für probabilistische Echtzeitsysteme mit Unsicherheiten erstellt und gezeigt, dass die Unsicherheiten vom Typ (1) und (2) in den untersuchten Systemen einen Ein uss auf die Wahl der Modellierungs- und der Analysemethode haben. Als formales Modell werden Interval Probabilistic Timed Automata (IPTA) benutzt. Basierend auf den erarbeiteten Anforderungen wird gezeigt, dass dieses Modell sowohl ausreichende Ausdrucksstärke für eine realistische und modulare Spezifikation als auch geeignete formale Methoden zur Bestimmung von quantitativen Sicherheits- und Zuverlässlichkeitseigenschaften bietet. Als technisches Mittel für die quantitative Analyse wird probabilistisches Model Checking, speziell probabilistische Zeit-beschränkte Erreichbarkeitsanalyse und Bestimmung von Erwartungswerten für Kosten und Vergütungen eingesetzt. Um die quantitative Analyse mittels probabilistischem Model Checking durchzuführen, wird eine Erweiterung des Prism-Werkzeugs zur Modellierung und Analyse von IPTA eingeführt. Die präsentierte Erweiterung von Prism ermöglicht die Modellierung von probabilistischen Unsicherheiten mittelsWahrscheinlichkeitsintervallen, wie sie für IPTA benötigt werden. Zur Verifikation wird probabilistische Erreichbarkeitsanalyse und die Berechnung von Erwartungswerten durch das Werkzeug unterstützt. Es wird die Performanz der Prism-Erweiterung untersucht und der Intervall-basierte IPTA-Ansatz mit Modellen mit festen Wahrscheinlichkeitswerten verglichen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 56 KW - Service-orientierte Systme KW - Echtzeitsysteme KW - Quantitative Analysen KW - Formale Verifikation KW - service-oriented systems KW - real-time systems KW - quantitative analysis KW - formal verification methods Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57845 SN - 978-3-86956-171-4 PB - Universitätsverlah Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Hildebrandt, Stephan A1 - Neumann, Stefan A1 - Wätzoldt, Sebastian T1 - Industrial case study on the integration of SysML and AUTOSAR with triple graph grammars N2 - During the overall development of complex engineering systems different modeling notations are employed. For example, in the domain of automotive systems system engineering models are employed quite early to capture the requirements and basic structuring of the entire system, while software engineering models are used later on to describe the concrete software architecture. Each model helps in addressing the specific design issue with appropriate notations and at a suitable level of abstraction. However, when we step forward from system design to the software design, the engineers have to ensure that all decisions captured in the system design model are correctly transferred to the software engineering model. Even worse, when changes occur later on in either model, today the consistency has to be reestablished in a cumbersome manual step. In this report, we present in an extended version of [Holger Giese, Stefan Neumann, and Stephan Hildebrandt. Model Synchronization at Work: Keeping SysML and AUTOSAR Models Consistent. In Gregor Engels, Claus Lewerentz, Wilhelm Schäfer, Andy Schürr, and B. Westfechtel, editors, Graph Transformations and Model Driven Enginering - Essays Dedicated to Manfred Nagl on the Occasion of his 65th Birthday, volume 5765 of Lecture Notes in Computer Science, pages 555–579. Springer Berlin / Heidelberg, 2010.] how model synchronization and consistency rules can be applied to automate this task and ensure that the different models are kept consistent. We also introduce a general approach for model synchronization. Besides synchronization, the approach consists of tool adapters as well as consistency rules covering the overlap between the synchronized parts of a model and the rest. We present the model synchronization algorithm based on triple graph grammars in detail and further exemplify the general approach by means of a model synchronization solution between system engineering models in SysML and software engineering models in AUTOSAR which has been developed for an industrial partner. In the appendix as extension to [19] the meta-models and all TGG rules for the SysML to AUTOSAR model synchronization are documented. N2 - Bei der Entwicklung komplexer technischer Systeme werden verschiedene Modellierungssprachen verwendet. Zum Beispiel werden bei der Entwicklung von Systemen in der Automobilindustrie bereits früh im Entwicklungsprozess Systemmodelle verwendet, um die Anforderungen und die grobe Struktur des Gesamtsystems darzustellen. Später werden Softwaremodelle verwendet, um die konkrete Softwarearchitektur zu modellieren. Jedes Modell stellt spezifische Entwurfsaspekte mit Hilfe passender Notationen auf einem angemessenen Abstraktionsniveau dar. Wenn jedoch vom Systementwurf zum Softwareentwurf übergegangen wird, müssen die Entwicklungsingenieure sicherstellen, dass alle Entwurfsentscheidungen, die im Systemmodell enthalten sind, korrekt auf das Softwaremodell übertragen werden. Sobald danach auch noch Änderungen auftreten, muss die Konsistenz zwischen den Modellen in einem aufwändigen manuellen Schritt wiederhergestellt werden. In diesem Bericht zeigen wir, wie Modellsynchronisation und Konsistenzregeln zur Automatisierung dieses Arbeitsschrittes verwendet und die Konsistenz zwischen den Modellen sichergestellt werden können. Außerdem stellen wir einen allgemeinen Ansatz zur Modellsynchronisation vor. Neben der reinen Synchronisation umfasst unsere Lösung weiterhin Tool-Adapter, sowie Konsistenzregeln, die sowohl die Teile der Modelle abdecken, die synchronisiert werden können, als auch die restlichen Teile. Der Modellsynchronisationsalgorithmus basiert auf Tripel-Graph-Grammatiken und wird im Detail erläutert. An Hand einer konkreten Transformation zwischen SysML- und AUTOSAR-Modellen, die im Rahmen eines Industrieprojektes entwickelt wurde, wird der Ansatz demonstriert. Im Anhang des Berichts sind alle TGG-Regeln für die SysML-zu-AUTOSAR-Transformation dokumentiert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 57 KW - Model Transformation KW - Model Synchronisation KW - SysML KW - AUTOSAR KW - Tripel-Graph-Grammatik KW - Model Transformation KW - Model Synchronization KW - SysML KW - AUTOSAR KW - Triple Graph Grammar Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60184 SN - 978-3-86956-191-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Haupt, Michael A1 - Marr, Stefan A1 - Hirschfeld, Robert T1 - CSOM/PL : a virtual machine product line N2 - CSOM/PL is a software product line (SPL) derived from applying multi-dimensional separation of concerns (MDSOC) techniques to the domain of high-level language virtual machine (VM) implementations. For CSOM/PL, we modularised CSOM, a Smalltalk VM implemented in C, using VMADL (virtual machine architecture description language). Several features of the original CSOM were encapsulated in VMADL modules and composed in various combinations. In an evaluation of our approach, we show that applying MDSOC and SPL principles to a domain as complex as that of VMs is not only feasible but beneficial, as it improves understandability, maintainability, and configurability of VM implementations without harming performance. N2 - CSOM/PL ist eine Softwareproduktfamilie (software product line, SPL), die erstellt wurde, indem Techniken der mehrdimensionalen Belangtrennung (multi-dimensional separation of concerns, MDSOC) auf die Domäne der virtuellen Maschinen (VM) für höhere Programmiersprachen angewendet wurden. Dazu wurde CSOM, eine in C implementierte Smalltalk-VM, mittels VMADL (virtual machine architecture description language) in Module zerlegt. Etliche Eigenschaften von CSOM wurden in VMADL-Module gekapselt und auf unterschiedliche Weisen komponiert. Die Auswertung des Ansatzes zeigt, dass die Anwendung von MDSOC- und SPL-Prinzipien auf die komplexe VM-Domäne nicht nur machbar ist, sondern darüber hinaus auch Vorteile mit sich bringt, da die Verständlichkeit, Wartbarkeit und Konfigurierbarkeit von VM-Implementierungen ohne Beeinträchtigung der Ausführungsgeschwindigkeit verbessert werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 48 KW - Virtuelle Maschinen KW - Architektur KW - Softwareproduktlinien KW - mehrdimensionale Belangtrennung KW - Virtual machines KW - architecture KW - software product lines KW - multi-dimensional separation of concerns Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52332 SN - 978-3-86956-134-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meyer, Andreas A1 - Pufahl, Luise A1 - Fahland, Dirk A1 - Weske, Mathias T1 - Modeling and enacting complex data dependencies in business processes N2 - Enacting business processes in process engines requires the coverage of control flow, resource assignments, and process data. While the first two aspects are well supported in current process engines, data dependencies need to be added and maintained manually by a process engineer. Thus, this task is error-prone and time-consuming. In this report, we address the problem of modeling processes with complex data dependencies, e.g., m:n relationships, and their automatic enactment from process models. First, we extend BPMN data objects with few annotations to allow data dependency handling as well as data instance differentiation. Second, we introduce a pattern-based approach to derive SQL queries from process models utilizing the above mentioned extensions. Therewith, we allow automatic enactment of data-aware BPMN process models. We implemented our approach for the Activiti process engine to show applicability. N2 - Die Ausführung von Geschäftsprozessen in Process Engines benötigt Informationen über den Kontrollfluss, die Rollenzuordnungen und die Datenabhängigkeiten. Während die ersten beiden Aspekte bereits automatisiert von Process Engines unterstützt werden, müssen die Datenabhängigkeiten durch einen Prozessingenieur manuell hinzugefügt und gewartet werden. Allerdings ist diese Aufgabe sehr fehleranfällig und zeitintensiv. In diesem Report zeigen wir wie Prozesse mit komplexen Datenabhängigkeiten, z.B. m:n Beziehungen, modelliert und automatisiert ausgeführt werden können. Dazu erweitern wir zuerst BPMN Datenobjekte mit wenigen Annotationen, um das Handling von Datenabhängikeiten sowie die Differenzierung von Datenobjektinstanzen zu ermöglichen. Danach beschreiben wir einen Pattern-basierten Ansatz, um SQL-Queries, unter Nutzung der oben erwähnten Erweiterungen, aus Prozessmodellen abzuleiten. Damit erlauben wir die automatisierte Ausführung von Daten-orientierten BPMN Prozessmodellen. Um die Anwendbarkeit unseres Ansatzen zu demonstieren, implementierten wir ihn für die Process Engine Activiti. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 74 KW - Prozessmodellierung KW - Datenmodellierung KW - Prozessausführung KW - BPMN KW - SQL KW - Process Modeling KW - Data Modeling KW - Process Enactment KW - BPMN KW - SQL Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65103 SN - 978-3-86956-245-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Hebig, Regina A1 - Giese, Holger A1 - Batoulis, Kimon A1 - Langer, Philipp A1 - Zamani Farahani, Armin A1 - Yao, Gary A1 - Wolowyk, Mychajlo T1 - Development of AUTOSAR standard documents at Carmeq GmbH T1 - Entwicklung der AUTOSAR-Standarddokumente bei Carmeq GmbH BT - a case study BT - eine Fall Studie N2 - This report documents the captured MDE history of Carmeq GmbH, in context of the project Evolution of MDE Settings in Practice. The goal of the project is the elicitation of MDE approaches and their evolution. N2 - Dieser technische Bericht dokumentiert wie sich der MDE Ansatz zur Entwicklung von Softwarestandardisierungsdokumenten bei der Carmeq GmbH im Laufe der Zeit verändert hat. Diese Historie wurde im Rahmen des Projektes "Evolution of MDE Settings in Practice" (Evolution von MDE Ansätzen in der Praxis) erstellt. Ziel dieses Projektes ist die Erhebung von MDE Ansätzen und ihrer Evolution. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 92 KW - model-driven engineering KW - MDE settings KW - evolution in MDE KW - case study KW - modellgetriebene Entwicklung KW - MDE Ansatz KW - Evolution in MDE KW - Fallstudie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-71535 SN - 978-3-86956-317-6 SN - 1613-5652 SN - 2191-1665 IS - 92 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Calmez, Conrad A1 - Hesse, Hubert A1 - Siegmund, Benjamin A1 - Stamm, Sebastian A1 - Thomschke, Astrid A1 - Hirschfeld, Robert A1 - Ingalls, Dan A1 - Lincke, Jens T1 - Explorative authoring of Active Web content in a mobile environment N2 - Developing rich Web applications can be a complex job - especially when it comes to mobile device support. Web-based environments such as Lively Webwerkstatt can help developers implement such applications by making the development process more direct and interactive. Further the process of developing software is collaborative which creates the need that the development environment offers collaboration facilities. This report describes extensions of the webbased development environment Lively Webwerkstatt such that it can be used in a mobile environment. The extensions are collaboration mechanisms, user interface adaptations but as well event processing and performance measuring on mobile devices. N2 - Vielseitige Webanwendungen zu entwickeln kann eine komplexe Aufgabe sein - besonders wenn es die Unterstützung mobiler Geräte betrifft. Webbasierte Umgebungen wie Lively Kernel können Entwicklern helfen Webanwendungen zu entwickeln, indem sie den Entwicklungsprozess direkter und interaktiver gestalten. Zudem sind Entwicklungsprozesse von Software kollaborativ, d.h. Enwicklungsumgebungen müssen so gestaltet sein, dass sie mit kollaborativen Elementen zu unterstützen. Diese Arbeit beschreibt die Erweiterungen der webbasierten Entwicklungsumgebung Lively Webwerkstatt, so dass diese in einer mobilen Umgebung genutzt werden kann. Die Reichweite dieser Erweiterungen erstreckt sich von Kollaborationsmechanismen und Benutzerschnittstellen bis hin zu Eventbehandlung und Performanzmessungen auf mobilen Geräten. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 72 KW - Web applications KW - Mobile Application Development KW - CSCW KW - Lively Kernel Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64054 SN - 978-3-86956-232-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Wist, Dominic A1 - Wollowski, Ralf T1 - STG decomposition : avoiding irreducible CSC conflicts by internal communication N2 - Inhalt: 1 Introduction 2 Basic Definitions 3 Achieving SI Implementability by Internal Communication 4 Towards a Structural Method 5 Examples 6 Conclusions and Future Work T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 20 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32968 SN - 978-3-940793-02-7 ER - TY - BOOK ED - Richter, Stefan ED - Henze, Stefan ED - Büttner, Eiko ED - Bach, Steffen ED - Polze, Andreas T1 - Java language conversion assistant : an analysis N2 - This document is an analysis of the 'Java Language Conversion Assistant'. Itr will also cover a language analysis of the Java Programming Language as well as a survey of related work concerning Java and C# interoperability on the one hand and language conversion in general on the other. Part I deals with language analysis. Part II covers the JLCA tool and tests used to analyse the tool. Additionally, it gives an overview of the above mentioned related work. Part III presents a complete project that has been translated using the JLCA. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 04 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33151 SN - 978-3-937786-10-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK ED - Gröne, Bernhard ED - Keller, Frank T1 - Conceptual architecture patterns : FMC–based representations N2 - This document presents the results of the seminar "Coneptual Arachitecture Patterns" of the winter term 2002 in the Hasso-Plattner-Institute. It is a compilation of the student's elaborations dealing with some conceptual architecture patterns which can be found in literature. One important focus laid on the runtime structures and the presentation of the patterns. 1. Introduction 1.1. The Seminar 1.2. Literature 2 Pipes and Filters (André Langhorst and Martin Steinle) 3 Broker (Konrad Hübner and Einar Lück) 4 Microkernel (Eiko Büttner and Stefan Richter) 5 Component Configurator (Stefan Röck and Alexander Gierak) 6 Interceptor (Marc Förster and Peter Aschenbrenner) 7 Reactor (Nikolai Cieslak and Dennis Eder) 8 Half–Sync/Half–Async (Robert Mitschke and Harald Schubert) 9 Leader/Followers (Dennis Klemann and Steffen Schmidt) T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 02 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33173 SN - 978-3-935024-98-3 ER - TY - BOOK A1 - Kuropka, Dominik A1 - Meyer, Harald T1 - Survey on Service Composition N2 - It is predicted that Service-oriented Architectures (SOA) will have a high impact on future electronic business and markets. Services will provide an self-contained and standardised interface towards business and are considered as the future platform for business-to-business and business-toconsumer trades. Founded by the complexity of real world business scenarios a huge need for an easy, flexible and automated creation and enactment of service compositions is observed. This survey explores the relationship of service composition with workflow management—a technology/ concept already in use in many business environments. The similarities between the both and the key differences between them are elaborated. Furthermore methods for composition of services ranging from manual, semi- to full-automated composition are sketched. This survey concludes that current tools for service composition are in an immature state and that there is still much research to do before service composition can be used easily and conveniently in real world scenarios. However, since automated service composition is a key enabler for the full potential of Service-oriented Architectures, further research on this field is imperative. This survey closes with a formal sample scenario presented in appendix A to give the reader an impression on how full-automated service composition works. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 10 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33787 SN - 3-937786-78-3 SN - 978-3-937786-78-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Gröne, Bernhard A1 - Knöpfel, Andreas A1 - Kugel, Rudolf A1 - Schmidt, Oliver T1 - The Apache Modeling Project N2 - This document presents an introduction to the Apache HTTP Server, covering both an overview and implementation details. It presents results of the Apache Modelling Project done by research assistants and students of the Hasso–Plattner–Institute in 2001, 2002 and 2003. The Apache HTTP Server was used to introduce students to the application of the modeling technique FMC, a method that supports transporting knowledge about complex systems in the domain of information processing (software and hardware as well). After an introduction to HTTP servers in general, we will focus on protocols and web technology. Then we will discuss Apache, its operational environment and its extension capabilities— the module API. Finally we will guide the reader through parts of the Apache source code and explain the most important pieces. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 05 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33147 SN - 978-3-937786-14-8 ER - TY - BOOK A1 - Geller, Felix A1 - Hirschfeld, Robert A1 - Bracha, Gilad T1 - Pattern Matching for an object-oriented and dynamically typed programming language N2 - Pattern matching is a well-established concept in the functional programming community. It provides the means for concisely identifying and destructuring values of interest. This enables a clean separation of data structures and respective functionality, as well as dispatching functionality based on more than a single value. Unfortunately, expressive pattern matching facilities are seldomly incorporated in present object-oriented programming languages. We present a seamless integration of pattern matching facilities in an object-oriented and dynamically typed programming language: Newspeak. We describe language extensions to improve the practicability and integrate our additions with the existing programming environment for Newspeak. This report is based on the first author’s master’s thesis. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 36 KW - Pattern Matching KW - Musterabgleich KW - Muster KW - Objekt-Orientiertes Programmieren KW - Dynamische Typ Systeme KW - Pattern Matching KW - Patterns KW - Object-Oriented Programming KW - Dynamic Type System Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-43035 SN - 978-3-86956-065-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Döllner, Jürgen Roland Friedrich A1 - Kirsch, Florian A1 - Nienhaus, Marc T1 - Visualizing Design and Spatial Assembly of Interactive CSG N2 - For interactive construction of CSG models understanding the layout of a model is essential for its efficient manipulation. To understand position and orientation of aggregated components of a CSG model, we need to realize its visible and occluded parts as a whole. Hence, transparency and enhanced outlines are key techniques to assist comprehension. We present a novel real-time rendering technique for visualizing design and spatial assembly of CSG models. As enabling technology we combine an image-space CSG rendering algorithm with blueprint rendering. Blueprint rendering applies depth peeling for extracting layers of ordered depth from polygonal models and then composes them in sorted order facilitating a clear insight of the models. We develop a solution for implementing depth peeling for CSG models considering their depth complexity. Capturing surface colors of each layer and later combining the results allows for generating order-independent transparency as one major rendering technique for CSG models. We further define visually important edges for CSG models and integrate an image-space edgeenhancement technique for detecting them in each layer. In this way, we extract visually important edges that are directly and not directly visible to outline a model’s layout. Combining edges with transparency rendering, finally, generates edge-enhanced depictions of image-based CSG models and allows us to realize their complex, spatial assembly. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 07 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33771 SN - 978-3-937786-56-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Lange, Dustin A1 - Böhm, Christoph A1 - Naumann, Felix T1 - Extracting structured information from Wikipedia articles to populate infoboxes N2 - Roughly every third Wikipedia article contains an infobox - a table that displays important facts about the subject in attribute-value form. The schema of an infobox, i.e., the attributes that can be expressed for a concept, is defined by an infobox template. Often, authors do not specify all template attributes, resulting in incomplete infoboxes. With iPopulator, we introduce a system that automatically populates infoboxes of Wikipedia articles by extracting attribute values from the article's text. In contrast to prior work, iPopulator detects and exploits the structure of attribute values for independently extracting value parts. We have tested iPopulator on the entire set of infobox templates and provide a detailed analysis of its effectiveness. For instance, we achieve an average extraction precision of 91% for 1,727 distinct infobox template attributes. N2 - Ungefähr jeder dritte Wikipedia-Artikel enthält eine Infobox - eine Tabelle, die wichtige Fakten über das beschriebene Thema in Attribut-Wert-Form darstellt. Das Schema einer Infobox, d.h. die Attribute, die für ein Konzept verwendet werden können, wird durch ein Infobox-Template definiert. Häufig geben Autoren nicht für alle Template-Attribute Werte an, wodurch unvollständige Infoboxen entstehen. Mit iPopulator stellen wir ein System vor, welches automatisch Infoboxen von Wikipedia-Artikeln durch Extrahieren von Attributwerten aus dem Artikeltext befüllt. Im Unterschied zu früheren Arbeiten erkennt iPopulator die Struktur von Attributwerten und nutzt diese aus, um die einzelnen Bestandteile von Attributwerten unabhängig voneinander zu extrahieren. Wir haben iPopulator auf der gesamten Menge der Infobox-Templates getestet und analysieren detailliert die Effektivität. Wir erreichen beispielsweise für die Extraktion einen durchschnittlichen Precision-Wert von 91% für 1.727 verschiedene Infobox-Template-Attribute. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 38 KW - Informationsextraktion KW - Wikipedia KW - Linked Data KW - Information Extraction KW - Wikipedia KW - Linked Data Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45714 SN - 978-3-86956-081-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Wist, Dominic A1 - Schaefer, Mark A1 - Vogler, Walter A1 - Wollowski, Ralf T1 - STG decomposition : internal communication for SI implementability N2 - STG decomposition is a promising approach to tackle the complexity problems arising in logic synthesis of speed independent circuits, a robust asynchronous (i.e. clockless) circuit type. Unfortunately, STG decomposition can result in components that in isolation have irreducible CSC conflicts. Generalising earlier work, it is shown how to resolve such conflicts by introducing internal communication between the components via structural techniques only. N2 - STG-Dekomposition ist ein bewährter Ansatz zur Bewältigung der Komplexitätsprobleme bei der Logiksynthese von SI (speed independent) Schaltungen – ein robuster asynchroner (d.h. ohne Taktsignal arbeitender digitaler) Schaltungstyp. Allerdings können dabei Komponenten mit irreduziblen CSC-Konflikten entstehen. Durch Verallgemeinerung früherer Arbeiten wird gezeigt, wie solche Konflikte durch Einführung interner Kommunikation zwischen den Komponenten gelöst werden können, und zwar ausschließlich durch Verwendung an der Graphenstruktur ansetzender Verfahren. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 32 KW - Asynchrone Schaltung KW - Petrinetz KW - Signalflankengraph (SFG oder STG) KW - STG-Dekomposition KW - speed independent KW - CSC KW - Controller-Resynthese KW - Asynchronous circuit KW - petri net KW - signal transition graph KW - STG decomposition KW - speed independent KW - CSC KW - control resynthesis Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-40786 SN - 978-3-86956-037-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK ED - Adams, Bram ED - Haupt, Michael ED - Lohmann, Daniel T1 - Proceedings of the 9th Workshop on Aspects, Components, and Patterns for Infrastructure Software (ACP4IS '10) N2 - Aspect-oriented programming, component models, and design patterns are modern and actively evolving techniques for improving the modularization of complex software. In particular, these techniques hold great promise for the development of "systems infrastructure" software, e.g., application servers, middleware, virtual machines, compilers, operating systems, and other software that provides general services for higher-level applications. The developers of infrastructure software are faced with increasing demands from application programmers needing higher-level support for application development. Meeting these demands requires careful use of software modularization techniques, since infrastructural concerns are notoriously hard to modularize. Aspects, components, and patterns provide very different means to deal with infrastructure software, but despite their differences, they have much in common. For instance, component models try to free the developer from the need to deal directly with services like security or transactions. These are primary examples of crosscutting concerns, and modularizing such concerns are the main target of aspect-oriented languages. Similarly, design patterns like Visitor and Interceptor facilitate the clean modularization of otherwise tangled concerns. Building on the ACP4IS meetings at AOSD 2002-2009, this workshop aims to provide a highly interactive forum for researchers and developers to discuss the application of and relationships between aspects, components, and patterns within modern infrastructure software. The goal is to put aspects, components, and patterns into a common reference frame and to build connections between the software engineering and systems communities. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 33 KW - Aspektorientierte Softwareentwicklung KW - Systemsoftware KW - Middleware KW - Virtuelle Maschinen KW - Betriebssysteme KW - systems software KW - middleware KW - virtual machines KW - operating systems Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41221 SN - 978-3-86956-043-4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Bauckmann, Jana A1 - Leser, Ulf A1 - Naumann, Felix T1 - Efficient and exact computation of inclusion dependencies for data integration N2 - Data obtained from foreign data sources often come with only superficial structural information, such as relation names and attribute names. Other types of metadata that are important for effective integration and meaningful querying of such data sets are missing. In particular, relationships among attributes, such as foreign keys, are crucial metadata for understanding the structure of an unknown database. The discovery of such relationships is difficult, because in principle for each pair of attributes in the database each pair of data values must be compared. A precondition for a foreign key is an inclusion dependency (IND) between the key and the foreign key attributes. We present with Spider an algorithm that efficiently finds all INDs in a given relational database. It leverages the sorting facilities of DBMS but performs the actual comparisons outside of the database to save computation. Spider analyzes very large databases up to an order of magnitude faster than previous approaches. We also evaluate in detail the effectiveness of several heuristics to reduce the number of necessary comparisons. Furthermore, we generalize Spider to find composite INDs covering multiple attributes, and partial INDs, which are true INDs for all but a certain number of values. This last type is particularly relevant when integrating dirty data as is often the case in the life sciences domain - our driving motivation. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 34 KW - Metadatenentdeckung KW - Metadatenqualität KW - Schemaentdeckung KW - Datenanalyse KW - Datenintegration KW - metadata discovery KW - metadata quality KW - schema discovery KW - data profiling KW - data integration Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41396 SN - 978-3-86956-048-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Lübbe, Alexander T1 - The effect of tangible media on individuals in business process modeling : a controlled experiment = Der Einfluss greifbarer Medien auf einzelne Personen bei der Geschäftsprozessmodellierung : ein kontrolliertes Experiment N2 - In current practice, business processes modeling is done by trained method experts. Domain experts are interviewed to elicit their process information but not involved in modeling. We created a haptic toolkit for process modeling that can be used in process elicitation sessions with domain experts. We hypothesize that this leads to more effective process elicitation. This paper brakes down "effective elicitation" to 14 operationalized hypotheses. They are assessed in a controlled experiment using questionnaires, process model feedback tests and video analysis. The experiment compares our approach to structured interviews in a repeated measurement design. We executed the experiment with 17 student clerks from a trade school. They represent potential users of the tool. Six out of fourteen hypotheses showed significant difference due to the method applied. Subjects reported more fun and more insights into process modeling with tangible media. Video analysis showed significantly more reviews and corrections applied during process elicitation. Moreover, people take more time to talk and think about their processes. We conclude that tangible media creates a different working mode for people in process elicitation with fun, new insights and instant feedback on preliminary results. N2 - Heute, werden Geschäftsprozesse durch speziell ausgebildete Modellierungsexperten erstellt. Wissensträger der Domäne werden befragt, aber sie werden nicht in die Modellierung einbezogen. Wir haben ein haptisches Werkzeug zur Prozessmodellierung entwickelt welches bei der Prozesserhebung zusammen mit den Domänenexperten eingesetzt wird. Wir vertreten die Hypothese, dass dies zur effizienteren Prozesserhebung beiträgt. In diesem Artikel schlüsseln wir "effiziente Prozesserhebung" in 14 operationalisierte Hypothesen auf. Diese werden in einem kontrollierten Experiment mit Hilfe von Fragebögen, Tests und Videoanalyse untersucht. In dem Experiment vergleichen wir unseren Ansatz mit strukturierten Interviews in einem Messwiederholungsdesign. Das Experiment wurde mit 17 Schülern kaufmännischer Berufe in einem Oberstufenzentrum durchgeführt. Sie repräsentieren potentielle Anwender unseres Ansatzes zu Prozesserhebung. Sechs der vierzehn Hypothesen zeigten einen signifikanten Unterschied zwischen den beiden Ansätzen. Teilnehmer berichteten mehr Spass an und mehr Erkenntnisse durch greifbare Prozessmodellierung zu haben. In der Videoanalyse beobachteten wir, dass Teilnehmer häufiger Ihre Aussagen prüfen und korrigieren. Außerdem wurde mehr Zeit für das Reden und Nachdenken über die Prozesse verwendet. Wir schlussfolgern, dass greifbare Medien ein anderes Arbeitsumfeld begünstigen mit mehr Spaß, neuen Erkenntnissen und direktem Feedback auf vorläufige Ergebnisse. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 41 KW - Prozessmodellierung KW - erfahrbare Medien KW - Individuen KW - Prozesserhebung KW - BPMN KW - t.BPM KW - kontrolliertes Experiment KW - Process Modeling KW - tangible media KW - individuals KW - process elicitation KW - BPMN KW - t.BPM KW - controlled experiment Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49001 SN - 978-3-86956-108-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK ED - Haupt, Michael ED - Hirschfeld, Robert T1 - Selected Papers of the International Workshop on Smalltalk Technologies (IWST’10) : Barcelona, Spain, September 14, 2010 N2 - The goal of the IWST workshop series is to create and foster a forum around advancements of or experience in Smalltalk. The workshop welcomes contributions to all aspects, theoretical as well as practical, of Smalltalk-related topics. N2 - Zweck der IWST-Workshop-Reihe ist die Formung und Pflege eines Forums fŸr die Diskussion von Fortschritten und Arbeitsergebnissen mit der Programmierumgebung Smalltalk. Der Workshop beinhaltet BeitrŠge zu allen Aspekten von auf Smalltalk bezogenen Arbeiten sowohl theoretischer als auch praktischer Natur. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 40 KW - Smalltalk KW - Programmierung KW - Web-Anwendungen KW - Fehlersuche KW - Laufzeitanalyse KW - smalltalk KW - programming KW - web-applications KW - debugging KW - profiling Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-48553 SN - 978-3-86956-106-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Scherbaum, Frank A1 - Mzhavanadze, Nana A1 - Arom, Simha A1 - Rosenzweig, Sebastian A1 - Müller, Meinard ED - Scherbaum, Frank T1 - Tonal Organization of the Erkomaishvili Dataset: Pitches, Scales, Melodies and Harmonies T3 - Computational Analysis Of Traditional Georgian Vocal Music N2 - In this study we examine the tonal organization of a series of recordings of liturgical chants, sung in 1966 by the Georgian master singer Artem Erkomaishvili. This dataset is the oldest corpus of Georgian chants from which the time synchronous F0-trajectories for all three voices have been reliably determined (Müller et al. 2017). It is therefore of outstanding importance for the understanding of the tuning principles of traditional Georgian vocal music. The aim of the present study is to use various computational methods to analyze what these recordings can contribute to the ongoing scientific dispute about traditional Georgian tuning systems. Starting point for the present analysis is the re-release of the original audio data together with estimated fundamental frequency (F0) trajectories for each of the three voices, beat annotations, and digital scores (Rosenzweig et al. 2020). We present synoptic models for the pitch and the harmonic interval distributions, which are the first of such models for which the complete Erkomaishvili dataset was used. We show that these distributions can be very compactly be expressed as Gaussian mixture models, anchored on discrete sets of pitch or interval values for the pitch and interval distributions, respectively. As part of our study we demonstrate that these pitch values, which we refer to as scale pitches, and which are determined as the mean values of the Gaussian mixture elements, define the scale degrees of the melodic sound scales which build the skeleton of Artem Erkomaishvili’s intonation. The observation of consistent pitch bending of notes in melodic phrases, which appear in identical form in a group of chants, as well as the observation of harmonically driven intonation adjustments, which are clearly documented for all pure harmonic intervals, demonstrate that Artem Erkomaishvili intentionally deviates from the scale pitch skeleton quite freely. As a central result of our study, we proof that this melodic freedom is always constrained by the attracting influence of the scale pitches. Deviations of the F0-values of individual note events from the scale pitches at one instance of time are compensated for in the subsequent melodic steps. This suggests a deviation-compensation mechanism at the core of Artem Erkomaishvili’s melody generation, which clearly honors the scales but still allows for a large degree of melodic flexibility. This model, which summarizes all partial aspects of our analysis, is consistent with the melodic scale models derived from the observed pitch distributions, as well as with the melodic and harmonic interval distributions. In addition to the tangible results of our work, we believe that our work has general implications for the determination of tuning models from audio data, in particular for non-tempered music. T3 - Computational Analysis Of Traditional Georgian Vocal Music - 1 KW - computational ethnomusicology KW - traditional Georgian music KW - Georgian chant KW - Artem Erkomaishvili KW - musical scales KW - computergestützte Musikethnologie KW - traditionelle Georgische Musik KW - Georgische liturgische Gesänge KW - Artem Erkomaishvili KW - musikalische Tonleitern Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-476141 SN - 2702-2641 IS - 1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Becker, Basil A1 - Giese, Holger A1 - Neumann, Stefan T1 - Correct dynamic service-oriented architectures : modeling and compositional verification with dynamic collaborations N2 - Service-oriented modeling employs collaborations to capture the coordination of multiple roles in form of service contracts. In case of dynamic collaborations the roles may join and leave the collaboration at runtime and therefore complex structural dynamics can result, which makes it very hard to ensure their correct and safe operation. We present in this paper our approach for modeling and verifying such dynamic collaborations. Modeling is supported using a well-defined subset of UML class diagrams, behavioral rules for the structural dynamics, and UML state machines for the role behavior. To be also able to verify the resulting service-oriented systems, we extended our former results for the automated verification of systems with structural dynamics [7, 8] and developed a compositional reasoning scheme, which enables the reuse of verification results. We outline our approach using the example of autonomous vehicles that use such dynamic collaborations via ad-hoc networking to coordinate and optimize their joint behavior. N2 - Bei der Modellierung Service-orientierter Systeme werden Kollaborationen verwendet, um die Koordination mehrerer Rollen durch Service-Verträge zu beschreiben. Dynamische Kollaborationen erlauben ein Hinzufügen und Entfernen von Rollen zur Kollaboration zur Laufzeit, wodurch eine komplexe strukturelle Dynamik entstehen kann. Die automatische Analyse service-orientierter Systeme wird durch diese erheblich erschwert. In dieser Arbeit stellen wir einen Ansatz zur Modellierung und Verifikation solcher dynamischer Kollaborationen vor. Eine spezielle Untermenge der UML ermöglicht die Modellierung, wobei Klassendiagramme, Verhaltensregeln für die strukturelle Dynamik und UML Zustandsdiagramme für das Verhalten der Rollen verwendet werden. Um die Verifikation der so modellierten service-orientierten Systeme zu ermöglichen, erweiterten wir unsere früheren Ergebnisse zur Verifikation von Systemen mit struktureller Dynamik [7,8] und entwickelten einen kompositionalen Verifikationsansatz. Der entwickelte Verifikationsansatz erlaubt es Ergebnisse wiederzuverwenden. Die entwickelten Techniken werden anhand autonomer Fahrzeuge, die dynamische Kollaborationen über ad-hoc Netzwerke zur Koordination und Optimierung ihres gemeinsamen Verhaltens nutzen, exemplarisch vorgestellt. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 29 Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-30473 SN - 978-3-940793-91-1 ER - TY - BOOK A1 - Smirnov, Sergey A1 - Zamani Farahani, Armin A1 - Weske, Mathias T1 - State propagation in abstracted business processes N2 - Business process models are abstractions of concrete operational procedures that occur in the daily business of organizations. To cope with the complexity of these models, business process model abstraction has been introduced recently. Its goal is to derive from a detailed process model several abstract models that provide a high-level understanding of the process. While techniques for constructing abstract models are reported in the literature, little is known about the relationships between process instances and abstract models. In this paper we show how the state of an abstract activity can be calculated from the states of related, detailed process activities as they happen. The approach uses activity state propagation. With state uniqueness and state transition correctness we introduce formal properties that improve the understanding of state propagation. Algorithms to check these properties are devised. Finally, we use behavioral profiles to identify and classify behavioral inconsistencies in abstract process models that might occur, once activity state propagation is used. N2 - Geschäftsprozessmodelle sind Abstraktionen konkreter operationaler Vorgänge, die im täglichen Geschäftsablauf von Organisationen auftreten. Um die Komplexität solcher Modelle zu bewältigen, wurde die Geschäftsprozessmodelabstraktion eingeführt. Ziel ist dabei, von einem detaillierten Prozessmodel mehrere abstrakte Modelle abzuleiten, um so auf einer höheren Abstraktionsstufe ein Verständnis für den Prozess zu bekommen. Während viel in der Literatur über Techniken zur Konstruktion abstrakter Modelle berichtet wurde, ist wenig über die Beziehungen zwischen Prozessinstanzen und abstrakten Modellen bekannt. In dieser Arbeit zeigen wir, wie der Zustand einer abstrakten Aktivität aus den Zuständen ihrer entsprechenden detaillierten Prozessaktivitäten zur Laufzeit berechnet werden kann. Der Ansatz basiert dabei auf der Übertragung des Aktivitätszustands. Mit der Zustandseindeutigkeit und der Korrektheit der Zustandstransitionen führen wir formale Kriterien ein, die das Verständnis der Zustandsübertragung erleichtern. Zudem sind Algorithmen entwickelt worden, um diese Kriterien zu überprüfen. Außerdem nutzen wir Verhaltensprofile um Inkonsistenzen im Verhalten abstrakter Prozessmodelle zu identifizieren und zu klassifizieren, die auftreten können, wenn die Aktivitätszustände gemäß den Regeln abgebildet werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 47 KW - Abstraktion von Geschäftsprozessmodellen KW - Prozessinstanz KW - Propagation von Aktivitätsinstanzzuständen KW - business process model abstraction KW - process instance KW - activity instance state propagation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51480 SN - 978-3-86956-130-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Hildebrandt, Stephan A1 - Lambers, Leen T1 - Toward bridging the gap between formal semantics and implementation of triple graph grammars N2 - The correctness of model transformations is a crucial element for the model-driven engineering of high quality software. A prerequisite to verify model transformations at the level of the model transformation specification is that an unambiguous formal semantics exists and that the employed implementation of the model transformation language adheres to this semantics. However, for existing relational model transformation approaches it is usually not really clear under which constraints particular implementations are really conform to the formal semantics. In this paper, we will bridge this gap for the formal semantics of triple graph grammars (TGG) and an existing efficient implementation. Whereas the formal semantics assumes backtracking and ignores non-determinism, practical implementations do not support backtracking, require rule sets that ensure determinism, and include further optimizations. Therefore, we capture how the considered TGG implementation realizes the transformation by means of operational rules, define required criteria and show conformance to the formal semantics if these criteria are fulfilled. We further outline how static analysis can be employed to guarantee these criteria. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 37 Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45219 SN - 978-3-86956-078-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Polyvyanyy, Artem A1 - Smirnov, Sergey A1 - Weske, Mathias T1 - Reducing the complexity of large EPCs N2 - Inhalt: 1 Introduction 2 Motivation and Goal 3 Fundamentals 4 Elementary Abstractions 5 Real World Example 6 Conclusions T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 22 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32959 ER - TY - BOOK A1 - Breest, Martin A1 - Bouché, Paul A1 - Grund, Martin A1 - Haubrock, Sören A1 - Hüttenrauch, Stefan A1 - Kylau, Uwe A1 - Ploskonos, Anna A1 - Queck, Tobias A1 - Schreiter, Torben T1 - Fundamentals of Service-Oriented Engineering N2 - Since 2002, keywords like service-oriented engineering, service-oriented computing, and service-oriented architecture have been widely used in research, education, and enterprises. These and related terms are often misunderstood or used incorrectly. To correct these misunderstandings, a deeper knowledge of the concepts, the historical backgrounds, and an overview of service-oriented architectures is demanded and given in this paper. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 16 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33801 SN - 978-3-939469-35-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Polyvyanyy, Artem A1 - Kuropka, Dominik T1 - A quantitative evaluation of the enhanced topic-based vector space model N2 - This contribution presents a quantitative evaluation procedure for Information Retrieval models and the results of this procedure applied on the enhanced Topic-based Vector Space Model (eTVSM). Since the eTVSM is an ontology-based model, its effectiveness heavily depends on the quality of the underlaying ontology. Therefore the model has been tested with different ontologies to evaluate the impact of those ontologies on the effectiveness of the eTVSM. On the highest level of abstraction, the following results have been observed during our evaluation: First, the theoretically deduced statement that the eTVSM has a similar effecitivity like the classic Vector Space Model if a trivial ontology (every term is a concept and it is independet of any other concepts) is used has been approved. Second, we were able to show that the effectiveness of the eTVSM raises if an ontology is used which is only able to resolve synonyms. We were able to derive such kind of ontology automatically from the WordNet ontology. Third, we observed that more powerful ontologies automatically derived from the WordNet, dramatically dropped the effectiveness of the eTVSM model even clearly below the effectiveness level of the Vector Space Model. Fourth, we were able to show that a manually created and optimized ontology is able to raise the effectiveness of the eTVSM to a level which is clearly above the best effectiveness levels we have found in the literature for the Latent Semantic Index model with compareable document sets. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 19 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33816 SN - 978-3-939469-95-7 ER - TY - BOOK A1 - Hagedorn, Benjamin A1 - Schöbel, Michael A1 - Uflacker, Matthias A1 - Copaciu, Flavius A1 - Milanovic, Nikola T1 - Proceedings of the fall 2006 workshop of the HPI research school on service-oriented systems engineering N2 - 1. Design and Composition of 3D Geoinformation Services Benjamin Hagedorn 2. Operating System Abstractions for Service-Based Systems Michael Schöbel 3. A Task-oriented Approach to User-centered Design of Service-Based Enterprise Applications Matthias Uflacker 4. A Framework for Adaptive Transport in Service- Oriented Systems based on Performance Prediction Flavius Copaciu 5. Asynchronicity and Loose Coupling in Service-Oriented Architectures Nikola Milanovic T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 18 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33052 SN - 978-3-939469-58-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meyer, Harald A1 - Kuropka, Dominik T1 - Requirements for service composition N2 - 1 Introduction 2 Use case Scenario 3 General Composition Requirements 4 Functional Requirements of Service Composition 5 Non-Functional Requirements 6 Conclusion T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 11 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33096 SN - 978-3-937786-81-0 SN - 3-937786-81-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Nienhaus, Marc A1 - Gooch, Bruce A1 - Döllner, Jürgen Roland Friedrich T1 - Visualizing movement dynamics in virtual urban environments N2 - Dynamics in urban environments encompasses complex processes and phenomena such as related to movement (e.g.,traffic, people) and development (e.g., construction, settlement). This paper presents novel methods for creating human-centric illustrative maps for visualizing the movement dynamics in virtual 3D environments. The methods allow a viewer to gain rapid insight into traffic density and flow. The illustrative maps represent vehicle behavior as light threads. Light threads are a familiar visual metaphor caused by moving light sources producing streaks in a long-exposure photograph. A vehicle’s front and rear lights produce light threads that convey its direction of motion as well as its velocity and acceleration. The accumulation of light threads allows a viewer to quickly perceive traffic flow and density. The light-thread technique is a key element to effective visualization systems for analytic reasoning, exploration, and monitoring of geospatial processes. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 17 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33065 SN - 978-3-939469-52-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Hildebrandt, Stephan T1 - Efficient model synchronization of large-scale models N2 - Model-driven software development requires techniques to consistently propagate modifications between different related models to realize its full potential. For large-scale models, efficiency is essential in this respect. In this paper, we present an improved model synchronization algorithm based on triple graph grammars that is highly efficient and, therefore, can also synchronize large-scale models sufficiently fast. We can show, that the overall algorithm has optimal complexity if it is dominating the rule matching and further present extensive measurements that show the efficiency of the presented model transformation and synchronization technique. N2 - Die Model-getriebene Softwareentwicklung benötigt Techniken zur Übertragung von Änderungen zwischen verschiedenen zusammenhängenden Modellen, um vollständig nutzbar zu sein. Bei großen Modellen spielt hier die Effizienz eine entscheidende Rolle. In diesem Bericht stellen wir einen verbesserten Modellsynchronisationsalgorithmus vor, der auf Tripel-Graph-Grammatiken basiert. Dieser arbeitet sehr effizient und kann auch sehr große Modelle schnell synchronisieren. Wir können zeigen, dass der Gesamtalgortihmus eine optimale Komplexität aufweist, sofern er die Ausführung dominiert. Die Effizient des Algorithmus' wird durch einige Benchmarkergebnisse belegt. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 28 KW - Model Transformation KW - Model Synchronisation KW - Tripel-Graph-Grammatik KW - Modell-getriebene Softwareentwicklung KW - Model Transformation KW - Model Synchronization KW - Triple Graph Grammars KW - Model-Driven Engineering Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29281 SN - 978-3-940793-84-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Barkowsky, Matthias A1 - Giese, Holger T1 - Modular and incremental global model management with extended generalized discrimination networks T1 - Modulares und inkrementelles Globales Modellmanagement mit erweiterten Generalized Discrimination Networks N2 - Complex projects developed under the model-driven engineering paradigm nowadays often involve several interrelated models, which are automatically processed via a multitude of model operations. Modular and incremental construction and execution of such networks of models and model operations are required to accommodate efficient development with potentially large-scale models. The underlying problem is also called Global Model Management. In this report, we propose an approach to modular and incremental Global Model Management via an extension to the existing technique of Generalized Discrimination Networks (GDNs). In addition to further generalizing the notion of query operations employed in GDNs, we adapt the previously query-only mechanism to operations with side effects to integrate model transformation and model synchronization. We provide incremental algorithms for the execution of the resulting extended Generalized Discrimination Networks (eGDNs), as well as a prototypical implementation for a number of example eGDN operations. Based on this prototypical implementation, we experiment with an application scenario from the software development domain to empirically evaluate our approach with respect to scalability and conceptually demonstrate its applicability in a typical scenario. Initial results confirm that the presented approach can indeed be employed to realize efficient Global Model Management in the considered scenario. N2 - Komplexe Projekte, die unter dem Paradigma der modellgetriebenen Entwicklung entwickelt werden, nutzen heutzutage oft mehrere miteinander in Beziehung stehende Modelle, die durch eine Vielzahl von Modelloperationen automatiscsh verarbeitet werden. Die modulare und inkrementelle Konstruktion und Ausführung solcher Netzwerke von Modelloperationen ist eine Voraussetzung für effiziente Entwicklung mit potenziell sehr großen Modellen. Das zugrunde liegende Forschungsproblem heißt auch Globales Modellmanagement. In diesem Bericht schlagen wir einen Ansatz für modulares und inkrementelles Globales Modellmanagement vor, der auf einer Erweiterung der existierenden Technik der Generalized Discrimination Networks (GDNs) basiert. Neben einer weiteren Verallgemeinerung des Konzepts der Anfrageoperationen in GDNs erweitern wir den zuvor rein lesenden Mechanismus auf Operationen mit Seiteneffekten, um Modelltransformationen und Modellsynchronisationen zu integrieren. Wir präsentieren inkrementelle Algorithmen für die Ausführung der resultierenden erweiterten GDNs (eGDNs) sowie eine prototypische Implementierung von Beispieloperationen für eGDNs. Mithilfe dieser prototypischen Implementierung evaluieren wir unsere Lösung hinsichtlich ihrer Skalierbarkeit in einem Anwendungsszenario aus dem Bereich der Softwareentwicklung. Außerdem demonstrieren wir die Anwendbarkeit der entwickelten Technik konzeptionell anhand eines typischen Anwendugsszenario. Unsere ersten Ergebnisse bestätigen, dass die Lösung genutzt werden kann, um effizientes Globales Modellmanagement im betrachteten Szenario zu realisieren. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 154 KW - global model management KW - generalized discrimination networks KW - globales Modellmanagement KW - Generalized Discrimination Networks Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-573965 SN - 978-3-86956-555-2 SN - 1613-5652 SN - 2191-1665 IS - 154 SP - 63 EP - 63 ER - TY - BOOK A1 - Becker, Basil A1 - Giese, Holger T1 - Cyber-physical systems with dynamic structure : towards modeling and verification of inductive invariants N2 - Cyber-physical systems achieve sophisticated system behavior exploring the tight interconnection of physical coupling present in classical engineering systems and information technology based coupling. A particular challenging case are systems where these cyber-physical systems are formed ad hoc according to the specific local topology, the available networking capabilities, and the goals and constraints of the subsystems captured by the information processing part. In this paper we present a formalism that permits to model the sketched class of cyber-physical systems. The ad hoc formation of tightly coupled subsystems of arbitrary size are specified using a UML-based graph transformation system approach. Differential equations are employed to define the resulting tightly coupled behavior. Together, both form hybrid graph transformation systems where the graph transformation rules define the discrete steps where the topology or modes may change, while the differential equations capture the continuous behavior in between such discrete changes. In addition, we demonstrate that automated analysis techniques known for timed graph transformation systems for inductive invariants can be extended to also cover the hybrid case for an expressive case of hybrid models where the formed tightly coupled subsystems are restricted to smaller local networks. N2 - Cyber-physical Systeme erzielen ihr ausgefeiltes Systemverhalten durch die enge Verschränkung von physikalischer Kopplung, wie sie in Systemen der klassichen Igenieurs-Disziplinen vorkommt, und der Kopplung durch Informationstechnologie. Eine besondere Herausforderung stellen in diesem Zusammenhang Systeme dar, die durch die spontane Vernetzung einzelner Cyber-Physical-Systeme entsprechend der lokalen, topologischen Gegebenheiten, verfügbarer Netzwerkfähigkeiten und der Anforderungen und Beschränkungen der Teilsysteme, die durch den informationsverabeitenden Teil vorgegeben sind, entstehen. In diesem Bericht stellen wir einen Formalismus vor, der die Modellierung der eingangs skizzierten Systeme erlaubt. Ein auf UML aufbauender Graph-Transformations-Ansatz wird genutzt, um die spontane Bildung eng kooperierender Teilsysteme beliebiger Größe zu spezifizieren. Differentialgleichungen beschreiben das kombinierte Verhalten auf physikalischer Ebene. In Kombination ergeben diese beiden Formalismen hybride Graph-Transformations-Systeme, in denen die Graph-Transformationen diskrete Schritte und die Differentialgleichungen das kontinuierliche, physikalische Verhalten des Systems beschreiben. Zusätzlich, präsentieren wir die Erweiterung einer automatischen Analysetechnik zur Verifikation induktiver Invarianten, die bereits für zeitbehaftete Systeme bekannt ist, auf den ausdrucksstärkeren Fall der hybriden Modelle. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 64 KW - Cyber-Physical-Systeme KW - Verifikation KW - Modellierung KW - hybride Graph-Transformations-Systeme KW - Cyber-physical-systems KW - verification KW - modeling KW - hybrid graph-transformation-systems Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62437 SN - 978-3-86956-217-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Albrecht, Alexander A1 - Naumann, Felix T1 - Understanding cryptic schemata in large extract-transform-load systems N2 - Extract-Transform-Load (ETL) tools are used for the creation, maintenance, and evolution of data warehouses, data marts, and operational data stores. ETL workflows populate those systems with data from various data sources by specifying and executing a DAG of transformations. Over time, hundreds of individual workflows evolve as new sources and new requirements are integrated into the system. The maintenance and evolution of large-scale ETL systems requires much time and manual effort. A key problem is to understand the meaning of unfamiliar attribute labels in source and target databases and ETL transformations. Hard-to-understand attribute labels lead to frustration and time spent to develop and understand ETL workflows. We present a schema decryption technique to support ETL developers in understanding cryptic schemata of sources, targets, and ETL transformations. For a given ETL system, our recommender-like approach leverages the large number of mapped attribute labels in existing ETL workflows to produce good and meaningful decryptions. In this way we are able to decrypt attribute labels consisting of a number of unfamiliar few-letter abbreviations, such as UNP_PEN_INT, which we can decrypt to UNPAID_PENALTY_INTEREST. We evaluate our schema decryption approach on three real-world repositories of ETL workflows and show that our approach is able to suggest high-quality decryptions for cryptic attribute labels in a given schema. N2 - Extract-Transform-Load (ETL) Tools werden häufig beim Erstellen, der Wartung und der Weiterentwicklung von Data Warehouses, Data Marts und operationalen Datenbanken verwendet. ETL Workflows befüllen diese Systeme mit Daten aus vielen unterschiedlichen Quellsystemen. Ein ETL Workflow besteht aus mehreren Transformationsschritten, die einen DAG-strukturierter Graphen bilden. Mit der Zeit entstehen hunderte individueller ETL Workflows, da neue Datenquellen integriert oder neue Anforderungen umgesetzt werden müssen. Die Wartung und Weiterentwicklung von großen ETL Systemen benötigt viel Zeit und manuelle Arbeit. Ein zentrales Problem ist dabei das Verständnis unbekannter Attributnamen in Quell- und Zieldatenbanken und ETL Transformationen. Schwer verständliche Attributnamen führen zu Frustration und hohen Zeitaufwänden bei der Entwicklung und dem Verständnis von ETL Workflows. Wir präsentieren eine Schema Decryption Technik, die ETL Entwicklern das Verständnis kryptischer Schemata in Quell- und Zieldatenbanken und ETL Transformationen erleichtert. Unser Ansatz berücksichtigt für ein gegebenes ETL System die Vielzahl verknüpfter Attributnamen in den existierenden ETL Workflows. So werden gute und aussagekräftige "Decryptions" gefunden und wir sind in der Lage Attributnamen, die aus unbekannten Abkürzungen bestehen, zu "decrypten". So wird z.B. für den Attributenamen UNP_PEN_INT als Decryption UNPAIN_PENALTY_INTEREST vorgeschlagen. Unser Schema Decryption Ansatz wurde für drei ETL-Repositories evaluiert und es zeigte sich, dass unser Ansatz qualitativ hochwertige Decryptions für kryptische Attributnamen vorschlägt. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 60 KW - Extract-Transform-Load (ETL) KW - Data Warehouse KW - Datenintegration KW - Extract-Transform-Load (ETL) KW - Data Warehouse KW - Data Integration Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-61257 SN - 978-3-86956-201-8 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Bauckmann, Jana A1 - Abedjan, Ziawasch A1 - Leser, Ulf A1 - Müller, Heiko A1 - Naumann, Felix T1 - Covering or complete? : Discovering conditional inclusion dependencies N2 - Data dependencies, or integrity constraints, are used to improve the quality of a database schema, to optimize queries, and to ensure consistency in a database. In the last years conditional dependencies have been introduced to analyze and improve data quality. In short, a conditional dependency is a dependency with a limited scope defined by conditions over one or more attributes. Only the matching part of the instance must adhere to the dependency. In this paper we focus on conditional inclusion dependencies (CINDs). We generalize the definition of CINDs, distinguishing covering and completeness conditions. We present a new use case for such CINDs showing their value for solving complex data quality tasks. Further, we define quality measures for conditions inspired by precision and recall. We propose efficient algorithms that identify covering and completeness conditions conforming to given quality thresholds. Our algorithms choose not only the condition values but also the condition attributes automatically. Finally, we show that our approach efficiently provides meaningful and helpful results for our use case. N2 - Datenabhängigkeiten (wie zum Beispiel Integritätsbedingungen), werden verwendet, um die Qualität eines Datenbankschemas zu erhöhen, um Anfragen zu optimieren und um Konsistenz in einer Datenbank sicherzustellen. In den letzten Jahren wurden bedingte Abhängigkeiten (conditional dependencies) vorgestellt, die die Qualität von Daten analysieren und verbessern sollen. Eine bedingte Abhängigkeit ist eine Abhängigkeit mit begrenztem Gültigkeitsbereich, der über Bedingungen auf einem oder mehreren Attributen definiert wird. In diesem Bericht betrachten wir bedingte Inklusionsabhängigkeiten (conditional inclusion dependencies; CINDs). Wir generalisieren die Definition von CINDs anhand der Unterscheidung von überdeckenden (covering) und vollständigen (completeness) Bedingungen. Wir stellen einen Anwendungsfall für solche CINDs vor, der den Nutzen von CINDs bei der Lösung komplexer Datenqualitätsprobleme aufzeigt. Darüber hinaus definieren wir Qualitätsmaße für Bedingungen basierend auf Sensitivität und Genauigkeit. Wir stellen effiziente Algorithmen vor, die überdeckende und vollständige Bedingungen innerhalb vorgegebener Schwellwerte finden. Unsere Algorithmen wählen nicht nur die Werte der Bedingungen, sondern finden auch die Bedingungsattribute automatisch. Abschließend zeigen wir, dass unser Ansatz effizient sinnvolle und hilfreiche Ergebnisse für den vorgestellten Anwendungsfall liefert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 62 KW - Datenabhängigkeiten KW - Bedingte Inklusionsabhängigkeiten KW - Erkennen von Meta-Daten KW - Linked Open Data KW - Link-Entdeckung KW - Assoziationsregeln KW - Data Dependency KW - Conditional Inclusion Dependency KW - Metadata Discovery KW - Linked Open Data KW - Link Discovery KW - Association Rule Mining Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62089 SN - 978-3-86956-212-4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Appeltauer, Malte A1 - Hirschfeld, Robert T1 - The JCop language specification : Version 1.0, April 2012 N2 - Program behavior that relies on contextual information, such as physical location or network accessibility, is common in today's applications, yet its representation is not sufficiently supported by programming languages. With context-oriented programming (COP), such context-dependent behavioral variations can be explicitly modularized and dynamically activated. In general, COP could be used to manage any context-specific behavior. However, its contemporary realizations limit the control of dynamic adaptation. This, in turn, limits the interaction of COP's adaptation mechanisms with widely used architectures, such as event-based, mobile, and distributed programming. The JCop programming language extends Java with language constructs for context-oriented programming and additionally provides a domain-specific aspect language for declarative control over runtime adaptations. As a result, these redesigned implementations are more concise and better modularized than their counterparts using plain COP. JCop's main features have been described in our previous publications. However, a complete language specification has not been presented so far. This report presents the entire JCop language including the syntax and semantics of its new language constructs. N2 - Das Verhalten von modernen Software-Anwendungen benötigt häufig Informationen über den Kontext ihrer Ausführung, z.B. die geografische Position, die Tageszeit oder die aktuelle Netzwerkbandbreite. Dennoch bieten heutige Programmiersprachen nur wenig Unterstützung für die Repräsentation kontextspezifischen Verhaltens. Kontextorientiertes Programmieren ist ein Ansatz, der die explizite Modularisierung und Laufzeitaktivierung von kontextspezifischem Verhalten auf der Ebene von Programmiersprachkonstrukten ermöglicht. Die bisherigen Umsetzungen von kontextorientiertem Programmieren schränken jedoch die Kontrolle der Laufzeitaktivierungen solches kontextspezifischen Verhaltens ein. Daraus folgt eine Einschränkung der Anwendungsbereiche für kontextorientiertes Programmieren, unter anderem für solche Domänen, in denen Programme sehr häufig kontextabhängiges Verhalten bereitstellen, z.B. ereignisbasierte, mobile und dienstorientierte Systeme. Die Programmiersprache JCop erweitert Java um Sprachkonstrukte für kontextorientieres Programmieren und bietet zusätzlich eine domänenspezifische Aspektsprach an, mit deren Hilfe Laufzeitadaptionen deklarativ spezifiziert werden können. Die Kernkonzepte von JCop wurden bereits in mehrern Publikationen vorgestellt, dieser Bericht enthält nun eine umfassende Sprachspezifikation von JCop. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 59 KW - Programming Languages KW - Context-oriented Programming KW - Aspect-oriented Programming KW - Java KW - JCop KW - runtime adaptations Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60208 SN - 978-3-86956-193-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK ED - Tröger, Peter ED - Polze, Andreas T1 - Proceedings of the 4th Many-core Applications Research Community (MARC) Symposium N2 - In continuation of a successful series of events, the 4th Many-core Applications Research Community (MARC) symposium took place at the HPI in Potsdam on December 8th and 9th 2011. Over 60 researchers from different fields presented their work on many-core hardware architectures, their programming models, and the resulting research questions for the upcoming generation of heterogeneous parallel systems. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 55 KW - Mehrkernsysteme KW - Verbindungsnetzwerke KW - Prozessoren KW - paralleles Rechnen KW - Virtualisierung KW - many-core KW - multi-core KW - interconnect KW - processor hardware KW - parallel computing KW - virtualization Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57898 SN - 978-3-86956-169-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK ED - Lincke, Jens ED - Hirschfeld, Robert T1 - Web-based development in the lively kernel N2 - The World Wide Web as an application platform becomes increasingly important. However, the development of Web applications is often more complex than for the desktop. Web-based development environments like Lively Webwerkstatt can mitigate this problem by making the development process more interactive and direct. By moving the development environment into the Web, applications can be developed collaboratively in a Wiki-like manner. This report documents the results of the project seminar on Web-based Development Environments 2010. In this seminar, participants extended the Web-based development environment Lively Webwerkstatt. They worked in small teams on current research topics from the field of Web-development and tool support for programmers and implemented their results in the Webwerkstatt environment. N2 - Das World Wide Web wird immer mehr zu einer Anwendungsplattform. Die Entwicklung von Web-Applikationen ist jedoch oft komplexer als die Erstellung traditioneller Desktop-Anwendungen. Web-basierte Entwicklungsumgebungen wie LivelyWebwerkstatt vereinfachen das Entwickeln, da der Programmierprozess interaktiver und direkter wird. Zudem ist es möglich, dass ähnlich wie in einem Wiki Entwickler bei der Anwendungserstellung zusammenarbeiten. Dieser Bericht dokumentiert die Ergebnisse des Projektseminars Web-basierte Entwicklungsumgebungen 2010. Im Rahmen des Seminars haben sich die Teilnehmer mit aktuellen Fragen aus dem Bereich derWeb-Entwicklung undWerkzeugunterstützung für Programmierer beschäftigt und die bestehende Web-basierte Entwicklungsumgebung Lively Webwerkstatt entsprechend erweitert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 53 Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55605 SN - 978-3-86956-160-8 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Kleine, Matthias A1 - Hirschfeld, Robert A1 - Bracha, Gilad T1 - An abstraction for version control systems T3 - Technische Berichte des Hasso-Plattner-Instituts für Softwaresystemtechnik an der Universität Potsdam N2 - Versionsverwaltungssysteme (VCS) ermöglichen es Entwicklern, Änderungen an Softwareartifakten zu verwalten. VCS werden mit Hilfe einer Vielzahl verschiedener Werkzeuge bedient, wie z.\,B. graphische Front-ends oder Kommandozeilenwerkzeuge. Es ist wünschenswert mit einzelnen solcher Werkzeuge unterschiedliche VCS bedienen zu können. Bislang hat sich jedoch keine Abstraktion für Versionsverwaltungssysteme durchgesetzt, mit deren Hilfe solche Werkzeuge erstellt werden können. Stattdessen implementieren Werkzeuge zur Interaktion mit mehreren VCS ad-hoc Lösungen. Diese Masterarbeit stellt Pur vor, eine Abstraktion über Versionsverwaltungskonzepte. Mit Hilfe von Pur können Anwendungsprogramme entwickelt werden, die mit mehreren Versionsverwaltungssystemen interagieren können. Im Rahmen dieser Arbeit wird eine Implementierung dieser Abstraktion bereitgestellt und mit Hilfe eines Anwendungsprogramms validiert. N2 - Version Control Systems (VCS) allow developers to manage changes to software artifacts. Developers interact with VCSs through a variety of client programs, such as graphical front-ends or command line tools. It is desirable to use the same version control client program against different VCSs. Unfortunately, no established abstraction over VCS concepts exists. Instead, VCS client programs implement ad-hoc solutions to support interaction with multiple VCSs. This thesis presents Pur, an abstraction over version control concepts that allows building rich client programs that can interact with multiple VCSs. We provide an implementation of this abstraction and validate it by implementing a client application. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 54 Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55629 SN - 978-3-86956-158-5 SN - 1613-5652 SN - 2191-1665 IS - 54 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Hebig, Regina A1 - Giese, Holger T1 - MDE settings in SAP : a descriptive field study N2 - MDE techniques are more and more used in praxis. However, there is currently a lack of detailed reports about how different MDE techniques are integrated into the development and combined with each other. To learn more about such MDE settings, we performed a descriptive and exploratory field study with SAP, which is a worldwide operating company with around 50.000 employees and builds enterprise software applications. This technical report describes insights we got during this study. For example, we identified that MDE settings are subject to evolution. Finally, this report outlines directions for future research to provide practical advises for the application of MDE settings. N2 - Techniken der modellgetriebenen Entwicklung (MDE) werden mehr und mehr in der Praxis eingesetzt. Dabei gibt es wenige detaillierte Berichte darüber wie unterschiedliche MDE-Techniken kombiniert und in die Entwicklung integriert werden. Die vorliegende beschreibende Feldstudie dient dem Zweck, in SAP genutzte MDE-Ansätze detailliert zu beschreiben. SAP ist ein weltweit operierendes Unternehmen, hat ca. 50 000 Mitarbeiter und stellt Softwarelösungen für Firmen her. Der vorliegende technische Bericht beschreibt die Einblicke die wir in dieser Studie erhalten haben. Dazu gehört die Einsicht, dass MDE Ansätze einer Evolution unterliegen. Schließlich umreißt dieser Bericht mögliche Richtungen für zukünftige Forschung um praktische Ratschläge für die Gestaltung von MDE Ansätzen geben zu können. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 58 KW - Model Transformation KW - Model Synchronisation KW - SysML KW - AUTOSAR KW - Tripel-Graph-Grammatik KW - modellgetriebene Entwicklung KW - beschreibende Feldstudie Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60193 SN - 978-3-86956-192-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Wätzoldt, Sebastian A1 - Giese, Holger T1 - Modeling collaborations in self-adaptive systems of systems BT - terms, characteristics, requirements, and scenarios N2 - An increasing demand on functionality and flexibility leads to an integration of beforehand isolated system solutions building a so-called System of Systems (SoS). Furthermore, the overall SoS should be adaptive to react on changing requirements and environmental conditions. Due SoS are composed of different independent systems that may join or leave the overall SoS at arbitrary point in times, the SoS structure varies during the systems lifetime and the overall SoS behavior emerges from the capabilities of the contained subsystems. In such complex system ensembles new demands of understanding the interaction among subsystems, the coupling of shared system knowledge and the influence of local adaptation strategies to the overall resulting system behavior arise. In this report, we formulate research questions with the focus of modeling interactions between system parts inside a SoS. Furthermore, we define our notion of important system types and terms by retrieving the current state of the art from literature. Having a common understanding of SoS, we discuss a set of typical SoS characteristics and derive general requirements for a collaboration modeling language. Additionally, we retrieve a broad spectrum of real scenarios and frameworks from literature and discuss how these scenarios cope with different characteristics of SoS. Finally, we discuss the state of the art for existing modeling languages that cope with collaborations for different system types such as SoS. N2 - Steigende Anforderungen zum Funktionsumfang und der Flexibilität von Systemen führt zur Integration von zuvor isolierten Systemlösungen zu sogenannten System of Systems (SoS). Weiterhin sollten solche SoS adaptive Eigenschaften aufweisen, die es ihm ermöglichen auf sich ändernde Anforderungen und Umwelteinflüsse zu reagieren. Weil SoS aus unterschiedlichen, unabhängigen Subsystemen zusammengesetzt sind, die wiederum das übergeordnete SoS zu beliebigen Zeitpunkten erweitern oder verlassen können, ist das SoS durch eine variable Systemstruktur gekennzeichnet. Weiterhin definieren sich der Funktionsumfang des SoS und dessen Potenzial aus den enthaltenen Subsystemen. Solche komplexen Systemzusammenstellungen erfordern neue Untersuchungstechniken, um die Interaktion der einzelnen Subsysteme, die Kopplung von geteilten Daten und den Einfluss von lokalen Adaptionsstrategien auf das Gesamtsystem besser verstehen zu können. In diesem Bericht formulieren wir aktuelle Forschungsfragen mit dem Fokus auf der Modellierung von Interaktionen zwischen verschiedenen Systemteilen innerhalt eines SoS. Weiterhin definieren wir wichtige Systemtypen und Begriffe aus diesem Bereich durch das Zusammentragen aktueller Literatur. Nachdem wir ein gemeinsames Verständnis über SoS geschaffen haben, leiten wir typische SoS Eigenschaften und allgemeine Anforderungen für eine Modellierungssprache für Kollaborationen ab. Zusätzlich führen wir eine Literaturstudie durch, in der wir ein breites Spektrum von realen Szenarios und existierenden Frameworks zusammentragen, an denen wir die aufgezeigten SoS Eigenschaften diskutieren. Abschließend beschreiben wir den Stand der Wissenschaft bezüglich existierender Modellierungssprachen, die sich mit Kollaborationen in verschiedenen Arten von Systemen, wie SoS, beschäftigen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 96 KW - modeling KW - collaboration KW - system of systems KW - cyber-physical systems KW - feedback loops KW - adaptive systems KW - Modellierung KW - Kollaborationen KW - System of Systems KW - Cyber-Physical Systems KW - Feedback Loops KW - adaptive Systeme Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-73036 SN - 978-3-86956-324-4 SN - 1613-5652 SN - 2191-1665 IS - 96 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Herschel, Melanie A1 - Naumann, Felix T1 - Space and time scalability of duplicate detection in graph data N2 - Duplicate detection consists in determining different representations of real-world objects in a database. Recent research has considered the use of relationships among object representations to improve duplicate detection. In the general case where relationships form a graph, research has mainly focused on duplicate detection quality/effectiveness. Scalability has been neglected so far, even though it is crucial for large real-world duplicate detection tasks. In this paper we scale up duplicate detection in graph data (DDG) to large amounts of data and pairwise comparisons, using the support of a relational database system. To this end, we first generalize the process of DDG. We then present how to scale algorithms for DDG in space (amount of data processed with limited main memory) and in time. Finally, we explore how complex similarity computation can be performed efficiently. Experiments on data an order of magnitude larger than data considered so far in DDG clearly show that our methods scale to large amounts of data not residing in main memory. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 25 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32851 SN - 978-3-940793-46-1 ER - TY - BOOK A1 - Polyvyanyy, Artem A1 - Smirnov, Sergey A1 - Weske, Mathias T1 - The triconnected abstraction of process models N2 - Contents: Artem Polyvanny, Sergey Smirnow, and Mathias Weske The Triconnected Abstraction of Process Models 1 Introduction 2 Business Process Model Abstraction 3 Preliminaries 4 Triconnected Decomposition 4.1 Basic Approach for Process Component Discovery 4.2 SPQR-Tree Decomposition 4.3 SPQR-Tree Fragments in the Context of Process Models 5 Triconnected Abstraction 5.1 Abstraction Rules 5.2 Abstraction Algorithm 6 Related Work and Conclusions T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 26 KW - Hasso-Plattner-Institut KW - Hasso-Plattner-Institute Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32847 SN - 978-3-940793-65-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Smirnov, Sergey A1 - Weidlich, Matthias A1 - Mendling, Jan A1 - Weske, Mathias T1 - Action patterns in business process models N2 - Business process management experiences a large uptake by the industry, and process models play an important role in the analysis and improvement of processes. While an increasing number of staff becomes involved in actual modeling practice, it is crucial to assure model quality and homogeneity along with providing suitable aids for creating models. In this paper we consider the problem of offering recommendations to the user during the act of modeling. Our key contribution is a concept for defining and identifying so-called action patterns - chunks of actions often appearing together in business processes. In particular, we specify action patterns and demonstrate how they can be identified from existing process model repositories using association rule mining techniques. Action patterns can then be used to suggest additional actions for a process model. Our approach is challenged by applying it to the collection of process models from the SAP Reference Model. N2 - Die zunehmende Bedeutung des Geschäftsprozessmanagements führt dazu, dass eine steigende Anzahl von Mitarbeitern eines Unternehmens mit der Erstellung von Prozessmodellen betraut ist. Um trotz dieser Tendenz die Qualität der Prozessmodelle, sowie ihre Homogenität sicherzustellen, sind entsprechende Modellierungshilfen unabdingbar. In diesem Bericht stellen wir einen Ansatz vor, welcher die Prozessmodellierung durch Empfehlungen unterstützt. Jene basieren auf sogenannten Aktionsmustern, welche typische Arbeitsblöcke darstellen. Neben der Definition dieser Aktionsmuster zeigen wir eine Methode zur Identifikation dieser Muster auf. Mittels Techniken der Assoziationsanalyse können die Muster automatisch aus einer Sammlung von Prozessmodellen extrahiert werden. Die Anwendbarkeit unseres Ansatzes wird durch eine Fallstudie auf Basis des SAP Referenzmodells illustriert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 30 Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33586 SN - 978-3-86956-009-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Eid-Sabbagh, Rami-Habib A1 - Hewelt, Marcin A1 - Weske, Mathias T1 - Business process architectures with multiplicities : transformation and correctness N2 - Business processes are instrumental to manage work in organisations. To study the interdependencies between business processes, Business Process Architectures have been introduced. These express trigger and message ow relations between business processes. When we investigate real world Business Process Architectures, we find complex interdependencies, involving multiple process instances. These aspects have not been studied in detail so far, especially concerning correctness properties. In this paper, we propose a modular transformation of BPAs to open nets for the analysis of behavior involving multiple business processes with multiplicities. For this purpose we introduce intermediary nets to portray semantics of multiplicity specifications. We evaluate our approach on a use case from the public sector. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 77 Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66780 SN - 978-3-86956-257-5 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Wassermann, Lars A1 - Felgentreff, Tim A1 - Pape, Tobias A1 - Bolz, Carl Friedrich A1 - Hirschfeld, Robert T1 - Tracing Algorithmic Primitives in RSqueak/VM N2 - When realizing a programming language as VM, implementing behavior as part of the VM, as primitive, usually results in reduced execution times. But supporting and developing primitive functions requires more effort than maintaining and using code in the hosted language since debugging is harder, and the turn-around times for VM parts are higher. Furthermore, source artifacts of primitive functions are seldom reused in new implementations of the same language. And if they are reused, the existing API usually is emulated, reducing the performance gains. Because of recent results in tracing dynamic compilation, the trade-off between performance and ease of implementation, reuse, and changeability might now be decided adversely. In this work, we investigate the trade-offs when creating primitives, and in particular how large a difference remains between primitive and hosted function run times in VMs with tracing just-in-time compiler. To that end, we implemented the algorithmic primitive BitBlt three times for RSqueak/VM. RSqueak/VM is a Smalltalk VM utilizing the PyPy RPython toolchain. We compare primitive implementations in C, RPython, and Smalltalk, showing that due to the tracing just-in-time compiler, the performance gap has lessened by one magnitude to one magnitude. N2 - Wenn man eine Programmiersprache als Virtuelle Maschine (VM) realisiert, dann wird Verhalten, das man als Teil der VM, also primitiv, implementiert normalerweise schneller ausgeführt, als vergleichbare Funktionen die in der implementierten Sprache verfasst wurden. Aber die Entwicklung und Wartung von primitiven Funktionen erfordert mehr Anstrengung als die Wartung und Benutzung von Funktionen der implementierten Sprache, da Fehlerbehebung schwerer ist, und die Entwicklungszyklen für VM-Teile länger sind. Im Gegensatz zu Programmen, die in der implementierten Programmiersprache geschrieben sind, wird Quelltext von Primitiven selten wiederverwendet. Und falls sie wiederverwendet werden, dann wird die Schnittstelle zur VM meist emuliert, was den Geschwindigkeitsvorteil reduziert. Aber aufgrund von neueren Resultaten der ablaufverfolgenden dynamischen Kompilierung, könnte die Abwägung zwischen Geschwindigkeit einerseits und Implementierungsaufwand, Wiederverwendbarkeit und Änderbarkeit andererseits nun zugunsten von letzteren ausfallen. In dieser Arbeit untersuchen wir, welche Abstriche bei der Implementierung von Verhalten als Primitive gemacht werden müssen, insbesondere wie hoch die Laufzeitunterschiede zwischen Primitiven und gehosteten Funktionen noch sind. Um das zu erreichen haben wir die algorithmische Primitive BitBlt drei mal für RSqueak/VM implementiert. RSqueak/VM ist eine Smalltalk VM, die die PyPy RPython-Toolkette verwendet. Wir vergleichen die Primitivenimplementierungen in C, RPython und Smalltalk, und zeigen, dass aufgrund eines ablaufverfolgenden just-in-time-Übersetzers der Geschwindigkeitsunterschied um eine Größenordnung auf eine Größenordnung gefallen ist. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 104 KW - virtual machines KW - collection types KW - memory optimization KW - dynamic typing KW - virtuelle Maschinen KW - Sammlungsdatentypen KW - Speicheroptimierungen KW - dynamische Sprachen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-91277 SN - 978-3-86956-355-8 SN - 1613-5652 SN - 2191-1665 IS - 104 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Schreiber, Robin A1 - Krahn, Robert A1 - Ingalls, Daniel H. H. A1 - Hirschfeld, Robert T1 - Transmorphic T1 - Transmorphic BT - mapping direct manipulation to source code transformations BT - Abbilden von direkter Manipulation zu Transformationen im Programmtext N2 - Defining Graphical User Interfaces (GUIs) through functional abstractions can reduce the complexity that arises from mutable abstractions. Recent examples, such as Facebook's React GUI framework have shown, how modelling the view as a functional projection from the application state to a visual representation can reduce the number of interacting objects and thus help to improve the reliabiliy of the system. This however comes at the price of a more rigid, functional framework where programmers are forced to express visual entities with functional abstractions, detached from the way one intuitively thinks about the physical world. In contrast to that, the GUI Framework Morphic allows interactions in the graphical domain, such as grabbing, dragging or resizing of elements to evolve an application at runtime, providing liveness and directness in the development workflow. Modelling each visual entity through mutable abstractions however makes it difficult to ensure correctness when GUIs start to grow more complex. Furthermore, by evolving morphs at runtime through direct manipulation we diverge more and more from the symbolic description that corresponds to the morph. Given that both of these approaches have their merits and problems, is there a way to combine them in a meaningful way that preserves their respective benefits? As a solution for this problem, we propose to lift Morphic's concept of direct manipulation from the mutation of state to the transformation of source code. In particular, we will explore the design, implementation and integration of a bidirectional mapping between the graphical representation and a functional and declarative symbolic description of a graphical user interface within a self hosted development environment. We will present Transmorphic, a functional take on the Morphic GUI Framework, where the visual and structural properties of morphs are defined in a purely functional, declarative fashion. In Transmorphic, the developer is able to assemble different morphs at runtime through direct manipulation which is automatically translated into changes in the code of the application. In this way, the comprehensiveness and predictability of direct manipulation can be used in the context of a purely functional GUI, while the effects of the manipulation are reflected in a medium that is always in reach for the programmer and can even be used to incorporate the source transformations into the source files of the application. N2 - Das Definieren von graphischen Benutzeroberflächen mittels funktionaler Abstraktionen, kann die Komplexität der Verwaltung des Zustandes der Anwendung erheblich reduzieren. Aktuelle Beispiele, wie Facebook's Framework *React*, zeigen auf, wie das modellieren der visuellen Schnittstelle als eine funktionale Projektion vom Zustand der Anwendung zur graphischen Repräsentation, die Anzahl der agierenden Objekte erheblich reduzieren und so die Verlässlichkeit des Systems erhöhen kann. Der Preis für die so erreichte Stabilität, ist eine relativ statische graphische Repräsentation, die sich zur Laufzeit nicht dynamisch anpassen lässt und in der jede visuelle Entität nur mittles funktionaler Abstraktionen beschrieben werden kann, was nicht unserem intuitiven Verständnis der Welt entspricht. Im Gegensatz dazu, erlaubt das Rahmenwerk Morphic mittles Interaktionen wie Ziehen, Greifen oder Skalieren von visuellen Elementen, die grahische Darstellung der Anwendung zur Laufzeit in einer unmittelbaren ("live") und direkten Art und Weise weiter zu entwickeln. Um diese Flexibilität zu erreichen, modelliert Morphic allerdings jedes graphische Objekt mittels veränderlichem Zustand, was das Garantieren der Fehlerfreiheit von graphischen Oberfläche, insbesondere bei sehr komplexen Schnittstellen, deutlich erschwehrt. Hinzu kommt, dass die dynamischen Anpassungen zur Laufzeit dazu führen, dass sich die Oberfläche mehr und mehr von ihrer ursprünglichen symbolischen Definition entfernt, da Morphic von selbst die Änderungen in der Laufzeit nicht im Quellcode reflektieren kann. Die Frage ist also ob es eine Kombination beider Ansätze gibt, welche es vermag die Vorteile zu erhalten und Nachteile wenn möglich auszugleichen. Als Lösung für dieses Problem schlagen wir vor das Konzept der direkten Manipulation aus Morphic auf Transformationen im Quellcode zu übertragen. Hierfür werden wir das Design, die Implementierung und Integration einer bidirektionalen Abbildung zwischen graphischer Darstellung und einer funktionalen, deklarativen symbolischen Beschreibung in einer selbsterhaltenden Entwicklungsumgebung erörtern. Wir werden Transmorphic vorstellen, eine funktionale Variante des Morphic Frameworks, in der visuelle und strukturelle Eigenschaften in einer strikt funktionalen und daher deklarativen Art und Weise definiert werden. Innerhalb von Transmorphic hat der Entwickler die Möglichkeit verschieden Morphs zur Laufzeit mittels direkter Manipulation zusammenzusetzen, was direkt zu Änderungen im Quellcode der Anwendung übersetzt wird. Auf diese Weise kann die verständliche und nachvollziehbare direkte Interaktion aus Morphic, im Kontext einer vollständig funktional beschriebenen graphischen Benutzeroberfläche verwendet werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 110 KW - functional programming KW - morphic KW - functional lenses KW - direct manipulation KW - synchronization KW - FRP KW - reactive KW - immutable values KW - live programming KW - funktionale Programmierung KW - Morphic KW - Functional Lenses KW - direkte Manipulation KW - Synchronisation KW - FRP KW - reaktive Programmierung KW - Unveränderlichkeit KW - Live-Programmierung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98300 SN - 978-3-86956-387-9 SN - 1613-5652 SN - 2191-1665 IS - 110 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Baltzer, Wanda A1 - Hradilak, Theresa A1 - Pfennigschmidt, Lara A1 - Prestin, Luc Maurice A1 - Spranger, Moritz A1 - Stadlinger, Simon A1 - Wendt, Leo A1 - Lincke, Jens A1 - Rein, Patrick A1 - Church, Luke A1 - Hirschfeld, Robert T1 - An individual-centered approach to visualize people’s opinions and demographic information N2 - The noble way to substantiate decisions that affect many people is to ask these people for their opinions. For governments that run whole countries, this means asking all citizens for their views to consider their situations and needs. Organizations such as Africa's Voices Foundation, who want to facilitate communication between decision-makers and citizens of a country, have difficulty mediating between these groups. To enable understanding, statements need to be summarized and visualized. Accomplishing these goals in a way that does justice to the citizens' voices and situations proves challenging. Standard charts do not help this cause as they fail to create empathy for the people behind their graphical abstractions. Furthermore, these charts do not create trust in the data they are representing as there is no way to see or navigate back to the underlying code and the original data. To fulfill these functions, visualizations would highly benefit from interactions to explore the displayed data, which standard charts often only limitedly provide. To help improve the understanding of people's voices, we developed and categorized 80 ideas for new visualizations, new interactions, and better connections between different charts, which we present in this report. From those ideas, we implemented 10 prototypes and two systems that integrate different visualizations. We show that this integration allows consistent appearance and behavior of visualizations. The visualizations all share the same main concept: representing each individual with a single dot. To realize this idea, we discuss technologies that efficiently allow the rendering of a large number of these dots. With these visualizations, direct interactions with representations of individuals are achievable by clicking on them or by dragging a selection around them. This direct interaction is only possible with a bidirectional connection from the visualization to the data it displays. We discuss different strategies for bidirectional mappings and the trade-offs involved. Having unified behavior across visualizations enhances exploration. For our prototypes, that includes grouping, filtering, highlighting, and coloring of dots. Our prototyping work was enabled by the development environment Lively4. We explain which parts of Lively4 facilitated our prototyping process. Finally, we evaluate our approach to domain problems and our developed visualization concepts. Our work provides inspiration and a starting point for visualization development in this domain. Our visualizations can improve communication between citizens and their government and motivate empathetic decisions. Our approach, combining low-level entities to create visualizations, provides value to an explorative and empathetic workflow. We show that the design space for visualizing this kind of data has a lot of potential and that it is possible to combine qualitative and quantitative approaches to data analysis. N2 - Der noble Weg, Entscheidungen, die viele Menschen betreffen, zu begründen, besteht darin, diese Menschen nach ihrer Meinung zu fragen. Für Regierungen, die ganze Länder führen, bedeutet dies, alle Bürger nach ihrer Meinung zu fragen, um ihre Situationen und Bedürfnisse zu berücksichtigen. Organisationen wie die Africa's Voices Foundation, die die Kommunikation zwischen Entscheidungsträgern und Bürgern eines Landes erleichtern wollen, haben Schwierigkeiten, zwischen diesen Gruppen zu vermitteln. Um Verständnis zu ermöglichen, müssen die Aussagen zusammengefasst und visualisiert werden. Diese Ziele auf eine Weise zu erreichen, die den Stimmen und Situationen der Bürgerinnen und Bürger gerecht wird, erweist sich als Herausforderung. Standardgrafiken helfen dabei nicht weiter, da es ihnen nicht gelingt, Empathie für die Menschen hinter ihren grafischen Abstraktionen zu schaffen. Darüber hinaus schaffen diese Diagramme kein Vertrauen in die Daten, die sie darstellen, da es keine Möglichkeit gibt, den verwendeten Code und die Originaldaten zu sehen oder zu ihnen zurück zu navigieren. Um diese Funktionen zu erfüllen, würden Visualisierungen sehr von Interaktionen zur Erkundung der angezeigten Daten profitieren, die Standardgrafiken oft nur begrenzt bieten. Um das Verständnis der Stimmen der Menschen zu verbessern, haben wir 80 Ideen für neue Visualisierungen, neue Interaktionen und bessere Verbindungen zwischen verschiedenen Diagrammen entwickelt und kategorisiert, die wir in diesem Bericht vorstellen. Aus diesen Ideen haben wir 10 Prototypen und zwei Systeme implementiert, die verschiedene Visualisierungen integrieren. Wir zeigen, dass diese Integration ein einheitliches Erscheinungsbild und Verhalten der Visualisierungen ermöglicht. Die Visualisierungen haben alle das gleiche Grundkonzept: Jedes Individuum wird durch einen einzigen Punkt dargestellt. Um diese Idee zu verwirklichen, diskutieren wir Technologien, die die effiziente Darstellung einer großen Anzahl dieser Punkte ermöglichen. Mit diesen Visualisierungen sind direkte Interaktionen mit Darstellungen von Individuen möglich, indem man auf sie klickt oder eine Auswahl um sie herumzieht. Diese direkte Interaktion ist nur mit einer bidirektionalen Verbindung von der Visualisierung zu den angezeigten Daten möglich. Wir diskutieren verschiedene Strategien für bidirektionale Mappings und die damit verbundenen Kompromisse. Ein einheitliches Verhalten über Visualisierungen hinweg verbessert die Exploration. Für unsere Prototypen umfasst dies Gruppierung, Filterung, Hervorhebung und Einfärbung von Punkten. Unsere Arbeit an den Prototypen wurde durch die Entwicklungsumgebung Lively4 ermöglicht. Wir erklären, welche Teile von Lively4 unseren Prototyping-Prozess erleichtert haben. Schließlich bewerten wir unsere Herangehensweise an Domänenprobleme und die von uns entwickelten Visualisierungskonzepte. Unsere Arbeit liefert Inspiration und einen Ausgangspunkt für die Entwicklung von Visualisierungen in diesem Bereich. Unsere Visualisierungen können die Kommunikation zwischen Bürgern und ihrer Regierung verbessern und einfühlsame Entscheidungen motivieren. Unser Ansatz, bei dem wir niedrigstufige Entitäten zur Erstellung von Visualisierungen kombinieren, bietet einen wertvollen Ansatz für einen explorativen und einfühlsamen Arbeitsablauf. Wir zeigen, dass der Designraum für die Visualisierung dieser Art von Daten ein großes Potenzial hat und dass es möglich ist, qualitative und quantitative Ansätze zur Datenanalyse zu kombinieren. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 136 KW - data visualization KW - demographic information KW - visualization concept exploration KW - web-based development environment KW - Datenvisualisierung KW - demografische Informationen KW - Visualisierungskonzept-Exploration KW - web-basierte Entwicklungsumgebung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-491457 SN - 978-3-86956-504-0 SN - 1613-5652 SN - 2191-1665 IS - 136 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Seitz, Klara A1 - Lincke, Jens A1 - Rein, Patrick A1 - Hirschfeld, Robert T1 - Language and tool support for 3D crochet patterns BT - virtual crochet with a graph structure N2 - Crochet is a popular handcraft all over the world. While other techniques such as knitting or weaving have received technical support over the years through machines, crochet is still a purely manual craft. Not just the act of crochet itself is manual but also the process of creating instructions for new crochet patterns, which is barely supported by domain specific digital solutions. This leads to unstructured and often also ambiguous and erroneous pattern instructions. In this report, we propose a concept to digitally represent crochet patterns. This format incorporates crochet techniques which allows domain specific support for crochet pattern designers during the pattern creation and instruction writing process. As contributions, we present a thorough domain analysis, the concept of a graph structure used as domain specific language to specify crochet patterns and a prototype of a projectional editor using the graph as representation format of patterns and a diagramming system to visualize them in 2D and 3D. By analyzing the domain, we learned about crochet techniques and pain points of designers in their pattern creation workflow. These insights are the basis on which we defined the pattern representation. In order to evaluate our concept, we built a prototype by which the feasibility of the concept is shown and we tested the software with professional crochet designers who approved of the concept. N2 - Häkeln ist eine weltweit verbreitete Handarbeitskunst. Obwohl andere Techniken, wie stricken und weben über die Zeit maschinelle Unterstützung erhalten haben, ist Häkeln noch heute ein komplett manueller Vorgang. Nicht nur das Häkeln an sich, sondern auch der Prozess zur Anleitungserstellung von neuen Häkeldesigns ist kaum unterstützt mit digitalen Lösungen. In dieser Arbeit stellen wir ein Konzept vor, das Häkelanleitungen digital repräsentiert. Das entwickelte Format integriert Häkeltechniken, wodurch wir den Prozess des Anleitungschreibens für Designer spezifisch für die Häkeldomäne unterstützen können. Als Beiträge analysieren wir umfassend die Häkeldomäne, entwickeln ein Konzept zur Repräsentation von Häkelanleitungen basierend auf einer Graphenstruktur als domänenspezifische Sprache und implementieren einen projektionalen Editor, der auf der besagten Graphenstruktur aufbaut und weiterhin die erstellten Anleitungen als schematische Darstellung in 2D und 3D visualisiert. Durch die Analyse der Domäne lernen wir Häkeltechniken und Schwachstellen beim Ablauf des Anleitungserstellens kennen. Basierend auf diesen Erkenntnissen entwickeln wir das digitale Format, um Anleitungen zu repräsentieren. Für die Evaluierung unseres Konzepts, haben wir einen Prototypen implementiert, der die Machbarkeit demonstriert. Zudem haben wir die Software von professionellen Häkeldesignern testen lassen, die unsere Herangehensweise gutheißen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 137 KW - crochet KW - visual language KW - tools KW - computer-aided design KW - Häkeln KW - visuelle Sprache KW - Werkzeuge KW - rechnerunterstütztes Konstruieren Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-492530 SN - 978-3-86956-505-7 SN - 1613-5652 SN - 2191-1665 IS - 137 PB - Universitätsverlag Potsdam CY - Potsdam ER -