TY - JOUR A1 - Nooshiri, Nima A1 - Saul, Joachim A1 - Heimann, Sebastian A1 - Tilmann, Frederik A1 - Dahm, Torsten T1 - Revision of earthquake hypocentre locations in global bulletin data sets using source-specific station terms JF - Geophysical journal international N2 - Global earthquake locations are often associated with very large systematic travel-time residuals even for clear arrivals, especially for regional and near-regional stations in subduction zones because of their strongly heterogeneous velocity structure. Travel-time corrections can drastically reduce travel-time residuals at regional stations and, in consequence, improve the relative location accuracy. We have extended the shrinking-box source-specific station terms technique to regional and teleseismic distances and adopted the algorithm for probabilistic, nonlinear, global-search location. We evaluated the potential of the method to compute precise relative hypocentre locations on a global scale. The method has been applied to two specific test regions using existing P- and pP-phase picks. The first data set consists of 3103 events along the Chilean margin and the second one comprises 1680 earthquakes in the Tonga-Fiji subduction zone. Pick data were obtained from the GEOFON earthquake bulletin, produced using data from all available, global station networks. A set of timing corrections varying as a function of source position was calculated for each seismic station. In this way, we could correct the systematic errors introduced into the locations by the inaccuracies in the assumed velocity structure without explicitly solving for a velocity model. Residual statistics show that the median absolute deviation of the travel-time residuals is reduced by 40-60 per cent at regional distances, where the velocity anomalies are strong. Moreover, the spread of the travel-time residuals decreased by similar to 20 per cent at teleseismic distances (>28 degrees). Furthermore, strong variations in initial residuals as a function of recording distance are smoothed out in the final residuals. The relocated catalogues exhibit less scattered locations in depth and sharper images of the seismicity associated with the subducting slabs. Comparison with a high-resolution local catalogue reveals that our relocation process significantly improves the hypocentre locations compared to standard locations. KW - Seismicity and tectonics KW - Computational seismology KW - Subduction zone processes KW - Pacific Ocean KW - South America Y1 - 2016 U6 - https://doi.org/10.1093/gji/ggw405 SN - 0956-540X SN - 1365-246X VL - 208 IS - 2 SP - 589 EP - 602 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Jamalreyhani, Mohammadreza A1 - Rezapour, Mehdi A1 - Cesca, Simone A1 - Dahm, Torsten A1 - Heimann, Sebastian A1 - Sudhaus, Henriette A1 - Isken, Marius Paul T1 - Insight into the 2017-2019 Lurestan arc seismic sequence (Zagros, Iran); complex earthquake interaction in the basement and sediments JF - Geophysical journal international N2 - Despite its high-seismogenic potential, the details of the seismogenic processes of Zagros Simply Folded Belt (SFB) remains debated. Three large earthquakes (M-w 7.3, 5.9 and 6.3) struck in the Lurestan arc of the Zagros SFB in 2017 and 2018. The sequence was recorded by seismic stations at regional, and teleseismic distances. Coseismic surface displacements, measured by Sentinel-1A/B satellites, provide additional data and a unique opportunity to study these earthquakes in detail. Here, we complement previous studies of the coseismic slip distribution of the 12 November 2017 M-w 7.3 Ezgeleh earthquake by a detailed analysis of its aftershocks, and we analysed the rupture process of the two interrelated earthquakes (25 August 2018 M-w 5.9 Tazehabad and the 25 November 2018 M-w 6.3 Sarpol-e Zahab earthquakes). We model the surface displacements obtained from Interferometric Synthetic Aperture Radar (InSAR) measurements and seismic records. We conduct non-linear probabilistic optimizations based on joint InSAR and seismic data to obtain finite-fault rupture of these earthquakes. The Lurestan arc earthquakes were followed by a sustained aftershock activity, with 133 aftershocks exceeding M-n 4.0 until 30 December 2019. We rely on the permanent seismic networks of Iran and Iraq to relocate similar to 700 M-n 3 + events and estimate moment tensor solutions for 85 aftershocks down to M-w 4.0. The 2017 Ezgeleh earthquake has been considered to activate a low-angle (similar to 17 degrees) dextral-thrust fault at the depth of 10-20 km. However, most of its aftershocks have shallow centroid depths (8-12 km). The joint interpretation of finite source models, moment tensor and hypocentral location indicate that the 2018 Tazehabad and Sarpol-e Zahab earthquakes ruptured different strike-slip structures, providing evidence for the activation of the sinistral and dextral strike-slip faults, respectively. The deformation in the Lurestan arc is seismically accommodated by a complex fault system involving both thrust and strike-slip faults. Knowledge about the deformation characteristics is important for the understanding of crustal shortening, faulting and hazard and risk assessment in this region. KW - Joint Inversion KW - Waveform inversion KW - Earthquake source observations KW - Seismicity and tectonics Y1 - 2022 U6 - https://doi.org/10.1093/gji/ggac057 SN - 0956-540X SN - 1365-246X VL - 230 IS - 1 SP - 114 EP - 130 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Grigoli, Francesco A1 - Cesca, Simone A1 - Amoroso, Ortensia A1 - Emolo, Antonio A1 - Zollo, Aldo A1 - Dahm, Torsten T1 - Automated seismic event location by waveform coherence analysis JF - Geophysical journal international N2 - Automated location of seismic events is a very important task in microseismic monitoring operations as well for local and regional seismic monitoring. Since microseismic records are generally characterized by low signal-to-noise ratio, automated location methods are requested to be noise robust and sufficiently accurate. Most of the standard automated location routines are based on the automated picking, identification and association of the first arrivals of P and S waves and on the minimization of the residuals between theoretical and observed arrival times of the considered seismic phases. Although current methods can accurately pick P onsets, the automatic picking of the S onset is still problematic, especially when the P coda overlaps the S wave onset. In this paper, we propose a picking free earthquake location method based on the use of the short-term-average/long-term-average (STA/LTA) traces at different stations as observed data. For the P phases, we use the STA/LTA traces of the vertical energy function, whereas for the S phases, we use the STA/LTA traces of a second characteristic function, which is obtained using the principal component analysis technique. In order to locate the seismic event, we scan the space of possible hypocentral locations and origin times, and stack the STA/LTA traces along the theoretical arrival time surface for both P and S phases. Iterating this procedure on a 3-D grid, we retrieve a multidimensional matrix whose absolute maximum corresponds to the spatial coordinates of the seismic event. A pilot application was performed in the Campania-Lucania region (southern Italy) using a seismic network (Irpinia Seismic Network) with an aperture of about 150 km. We located 196 crustal earthquakes (depth < 20 km) with magnitude range 1.1 < M-L < 2.7. A subset of these locations were compared with accurate manual locations refined by using a double-difference technique. Our results indicate a good agreement with manual locations. Moreover, our method is noise robust and performs better than classical location methods based on the automatic picking of the P and S waves first arrivals. KW - Time-series analysis KW - Inverse theory KW - Earthquake source observations KW - Seismicity and tectonics KW - Early warning Y1 - 2014 U6 - https://doi.org/10.1093/gji/ggt477 SN - 0956-540X SN - 1365-246X VL - 196 IS - 3 SP - 1742 EP - 1753 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Sen, Ali Tolga A1 - Cesca, Simone A1 - Bischoff, Monika A1 - Meier, Thomas A1 - Dahm, Torsten T1 - Automated full moment tensor inversion of coal mining-induced seismicity JF - Geophysical journal international N2 - Seismicity induced by coal mining in the Ruhr region, Germany, has been monitored continuously over the last 25 yr. In 2006, a dense temporary network (HAMNET) was deployed to locally monitor seismicity induced by longwall mining close to the town of Hamm. Between 2006 July and 2007 July, more than 7000 events with magnitudes M-L from -1.7 to 2.0 were detected. The spatiotemporal distribution of seismicity shows high correlation with the mining activity. In order to monitor rupture processes, we set up an automated source inversion routine and successfully perform double couple and full moment tensor (MT) inversions for more than 1000 events with magnitudes above M-L -0.5. The source inversion is based on a full waveform approach, both in the frequency and in the time domain, providing information about the centroid location, focal mechanism, scalar moment and full MT. Inversion results indicate a strong dominance of normal faulting focal mechanisms, with a steeper plane and a subhorizontal one. Fault planes are oriented parallel to the mining stopes. We classify the focal mechanisms based on their orientation and observe different frequency-magnitude distributions for families of events with different focal mechanisms; the overall frequency-magnitude distribution is not fitting the Gutenberg-Richter relation. Full MTs indicate that non-negligible opening tensile components accompanied normal faulting source mechanisms. Finally, extended source models are investigated for largest events. Results suggest that the rupture processes mostly occurred along the subvertical planes. KW - Geomechanics KW - Fracture and flow KW - Earthquake source observations KW - Seismicity and tectonics Y1 - 2013 U6 - https://doi.org/10.1093/gji/ggt300 SN - 0956-540X SN - 1365-246X VL - 195 IS - 2 SP - 1267 EP - 1281 PB - Oxford Univ. Press CY - Oxford ER - TY - GEN A1 - Passarelli, Luigi A1 - Hainzl, Sebastian A1 - Cesca, Simone A1 - Maccaferri, Francesco A1 - Mucciarelli, Marco A1 - Roessler, Dirk A1 - Corbi, Fabio A1 - Dahm, Torsten A1 - Rivalta, Eleonora T1 - Aseismic transient driving the swarm-like seismic sequence in the Pollino range, Southern Italy (vol 201, pg 1553, 2015) T2 - Geophysical journal international KW - Seismicity and tectonics KW - Statistical seismology KW - Dynamics: seismotectonics Y1 - 2016 U6 - https://doi.org/10.1093/gji/ggv425 SN - 0956-540X SN - 1365-246X VL - 204 SP - 365 EP - 365 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Passarelli, Luigi A1 - Hainzl, Sebastian A1 - Cesca, Simone A1 - Maccaferri, Francesco A1 - Mucciarelli, Marco A1 - Rößler, Dirk A1 - Corbi, Fabio A1 - Dahm, Torsten A1 - Rivalta, Eleonora T1 - Aseismic transient driving the swarm-like seismic sequence in the Pollino range, Southern Italy JF - Geophysical journal international N2 - Tectonic earthquake swarms challenge our understanding of earthquake processes since it is difficult to link observations to the underlying physical mechanisms and to assess the hazard they pose. Transient forcing is thought to initiate and drive the spatio-temporal release of energy during swarms. The nature of the transient forcing may vary across sequences and range from aseismic creeping or transient slip to diffusion of pore pressure pulses to fluid redistribution and migration within the seismogenic crust. Distinguishing between such forcing mechanisms may be critical to reduce epistemic uncertainties in the assessment of hazard due to seismic swarms, because it can provide information on the frequency-magnitude distribution of the earthquakes (often deviating from the assumed Gutenberg-Richter relation) and on the expected source parameters influencing the ground motion (for example the stress drop). Here we study the ongoing Pollino range (Southern Italy) seismic swarm, a long-lasting seismic sequence with more than five thousand events recorded and located since October 2010. The two largest shocks (magnitude M-w = 4.2 and M-w = 5.1) are among the largest earthquakes ever recorded in an area which represents a seismic gap in the Italian historical earthquake catalogue. We investigate the geometrical, mechanical and statistical characteristics of the largest earthquakes and of the entire swarm. We calculate the focal mechanisms of the M-l > 3 events in the sequence and the transfer of Coulomb stress on nearby known faults and analyse the statistics of the earthquake catalogue. We find that only 25 per cent of the earthquakes in the sequence can be explained as aftershocks, and the remaining 75 per cent may be attributed to a transient forcing. The b-values change in time throughout the sequence, with low b-values correlated with the period of highest rate of activity and with the occurrence of the largest shock. In the light of recent studies on the palaeoseismic and historical activity in the Pollino area, we identify two scenarios consistent with the observations and our analysis: This and past seismic swarms may have been 'passive' features, with small fault patches failing on largely locked faults, or may have been accompanied by an 'active', largely aseismic, release of a large portion of the accumulated tectonic strain. Those scenarios have very different implications for the seismic hazard of the area. KW - Seismicity and tectonics KW - Statistical seismology KW - Dynamics: seismotectonics Y1 - 2015 U6 - https://doi.org/10.1093/gji/ggv111 SN - 0956-540X SN - 1365-246X VL - 201 IS - 3 SP - 1553 EP - 1567 PB - Oxford Univ. Press CY - Oxford ER -