TY - THES A1 - Federico, Stefania T1 - Synthetic peptides derived from decorin as building blocks for biomaterials based on supramolecular interactions T1 - Synthetische Peptide Basierend auf Decorin als Bausteine für Supramolekulare Biomaterialien N2 - In this work, the development of a new molecular building block, based on synthetic peptides derived from decorin, is presented. These peptides represent a promising basis for the design of polymer-based biomaterials that mimic the ECM on a molecular level and exploit specific biological recognition for technical applications. Multiple sequence alignments of the internal repeats of decorin that formed the inner and outer surface of the arch-shaped protein were used to develop consensus sequences. These sequences contained conserved sequence motifs that are likely to be related to structural and functional features of the protein. Peptides representative for the consensus sequences were synthesized by microwave-assisted solid phase peptide synthesis and purified by RP-HPLC, with purities higher than 95 mol%. After confirming the desired masses by MALDI-TOF-MS, the primary structure of each peptide was investigated by 1H and 2D NMR, from which a full assignment of the chemical shifts was obtained. The characterization of the peptides conformation in solution was performed by CD spectroscopy, which demonstrated that using TFE, the peptides from the outer surface of decorin show a high propensity to fold into helical structures as observed in the original protein. To the contrary, the peptides from the inner surface did not show propensity to form stable secondary structure. The investigation of the binding capability of the peptides to Collagen I was performed by surface plasmon resonance analyses, from which all but one of the peptides representing the inner surface of decorin showed binding affinity to collagen with values of dissociation constant between 2•10-7 M and 2.3•10-4 M. On the other hand, the peptides representative for the outer surface of decorin did not show any significant interaction to collagen. This information was then used to develop experimental demonstration for the binding capabilities of the peptides from the inner surface of decorin to collagen even when used in more complicated situations close to possible appications. With this purpose, the peptide (LRELHLNNN) which showed the highest binding affinity to collagen (2•10-7 M) was functionalized with an N-terminal triple bond in order to obtain a peptide dimer via copper(I)-catalyzed cycloaddition reaction with 4,4'-diazidostilbene-2,2'-disulfonic acid. Rheological measurements showed that the presence of the peptide dimer was able to enhance the elastic modulus (G') of a collagen gel from ~ 600 Pa (collagen alone) to ~ 2700 Pa (collagen and peptide dimer). Moreover, it was shown that the mechanical properties of a collagen gel can be tailored by using different molar ratios of peptide dimer respect to collagen. The same peptide, functionalized with the triple bond, was used to obtain a peptide-dye conjugate by coupling it with N-(5'-azidopentanoyl)-5-aminofluorescein. An aqueous solution (5 vol% methanol) of the peptide dye conjugate was injected into a collagen and a hyaluronic acid (HA) gel and images of fluorescence detection showed that the diffusion of the peptide was slower in the collagen gel compared to the HA gel. The third experimental demonstration was gained using the peptide (LSELRLHNN) which showed the lower binding affinity (2.3•10-4 M) to collagen. This peptide was grafted to hyaluronic acid via EDC-chemistry, with a degree of functionalization of 7 ± 2 mol% as calculated by 1H-NMR. The grafting was further confirmed by FTIR and TGA measurements, which showed that the onset of decomposition for the HA-g-peptide decreased by 10 °C compared to the native HA. Rheological measurements showed that the elastic modulus of a system based on collagen and HA-g-peptide increased by almost two order of magnitude (G' = 200 Pa) compared to a system based on collagen and HA (G' = 0.9 Pa). Overall, this study showed that the synthetic peptides, which were identified from decorin, can be applied as potential building blocks for biomimetic materials that function via biological recognition. N2 - In dieser Arbeit wird das Design, die Synthese und Analyse neuer molekularer Bausteine für Biomaterialien basierend auf synthetischen, von Decorin abgeleiteten Peptiden beschrieben. Diese Peptide sind deshalb als Baustein für polymer-basierte Biomaterialien von besonderem Interesse, da sie die extrazelluläre Matrix (ECM) auf molekularer Ebene nachempfinden und spezifische, biologische wichtige Interaktionen für technische Anwendungen nutzbar machen. Das Alignment multipler Sequenzen der internen Repeats von Decorin, die jeweils die innere bzw. äußere Seite des sichelförmigen Decorins bilden, wurde genutzt, um Konsensus-Sequenzen zu definieren. Diese Sequenzen beinhalten stark konservierte Sequenzmotive, die wahrscheinlich wichtig für Struktur und Funktion des Proteins sind. Ausgewählte Peptide, die repräsentativ für die Konsensus-Sequenzen sind, wurden dann mittels Mikrowellen unterstützter Festphasensynthese synthetisiert und mit RP-HPLC aufgereinigt, so dass Peptide mit Reinheiten ≥ 95 mol% erhalten wurden. Die Peptide wurden per MALDI-TOF-MS sowie 1D und 2D NMR Spektroskopie charakterisiert, wobei die Zuordnung der chemischen Verschiebungen zu einzelnen Protonen und Kohlenstoffen aus den 2D NMR Experimenten erfolgte. In Lösung wurden die Peptide zudem mit CD Spektroskopie untersucht, wobei gezeigt werden konnte, dass nur Peptide, die von der äußeren Seite des Decorins abgeleitet wurden, sich durch Zugabe von 2,2,2-Trifluorethanol zu α-Helices falten. Diese Faltung ist auch in der Röntgenstruktur bei den korrespondierenden Abschnitten zu finden. Im Gegensatz dazu zeigten Peptide, die von der inneren Seite des Decorins abgeleitet wurden, keine stabilen Sekundärstrukturen in Lösung (β-Faltblattstruktur in der Röntgenstruktur). Bindungsstudien der Peptide zu Kollagen I wurden mit Oberflächenplasmonenresonanz durchgeführt, wobei gezeigt werden konnte, dass alle bis auf ein Peptid, die von der innneren Seite abgeleitet wurden, an Kollagen mit Dissoziationskonstanten von 2•10-7 M bis 2.3•10-4 M binden, während Peptide, die für die äußere Seite von Decorin repräsentativ sind, keine Bindung an Kollagen I zeigten. Diese Information wurde genutzt, um experimentelle Demonstrationsobjekte dieser Interaktion in komplexeren, einer späteren Anwendung näheren Situation, zu entwickeln. Dazu wurde das Peptide LRELHLNNN, welches die stärkste Bindung zu Kollagen I zeigte (KD = 2•10-7 M), N-terminal mit einer Alkinbindung funktionalisiert, so dass durch Kupfer (I) katalysierte Reaktion mit 4,4'-Diazidostilben-2,2'-disulfonsäure ein Peptid-Dimer erhalten werden konnte. Rheologische Untersuchungen zeigten, dass durch Zugabe des Peptid-Dimers der Elastizitätsmodul G' von Kollagen-Gelen von ~ 600 Pa (nur Kollagen) auf ~ 2700 Pa (Kollagen und Peptide-Dimer) gesteigert werden konnte. Darüber hinaus konnte gezeigt werden, dass die Veränderung der mechanischen Eigenschaften der Gele durch Veränderung des Kollagen:Peptid-Dimer Verhältnisses angepasst werden konnten. Das gleiche, mit einer Alkin-Bindung funktionaliserte Peptid wurde dann zur Darstellung eines Peptid-Fluorescein Konjugats genutzt, indem es mit N-(5'-azidopentanoyl)-5-aminofluorescein umgesetzt wurde. Eine wässrige Lösung des Peptid-Farbstoff-Konjugats wurde dann in Kollagen- bzw. Hyaluronsäuregele injiziert. Die Diffusion des Peptid-Farbstoff-Konjugats war in Kollagengelen im Vergleich zu Hyaluronsäuregelen deutlich verlangsamt. Das dritte Demonstrationsobjekt wurde erhalten, indem das Peptid LSELRLHNN, welches die geringste Bindung an Kollagen zeigte (KD = 2.3•10-4 M), auf Hyaluronsäure (HA) gegrafted wurde. Die Reaktion wurde durch Carbodiimid-mediierte Kupplung erreicht, und ein Funktionalisierungsgrad von 7 ± 2 mol% wurde durch Integration der 1H-NMR Spektren bestimmt. Das erfolgreiche Grafting wurde durch FTIR- und TGA-Untersuchungen bestätigt. In letzteren wurde gezeigt, dass der thermische Abbau durch das Grafting bei etwas niedrigeren Temperaturen beginnt als der Abbau reiner Hyaluronsäure (ΔT = 10 °C). Rheologische Untersuchungen zeigten, dass ein System aus Kollagen und HA-g-Peptid ein um zwei Größenordnungen höheren Elastizitätsmodul G' hat (G' = 200 Pa) als Systeme, die aus einer physikalischen Mischung von Kollagen und HA bestehen (G' = 0.9 Pa). Zusammenfassend konnte gezeigt werden, dass die Peptide, die von Decorin abgeleitet wurden, als Kollagen-bindende Bausteine für biomimetische Materialien genutzt werden können. KW - Decorin KW - Peptide KW - Supramolekularen Wechselwirkungen KW - Kollagen KW - Physikalische Vernetzung KW - Decorin KW - Peptides KW - Supramolecular Interactions KW - Collagen KW - Physical Crosslinking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59661 ER - TY - JOUR A1 - Federico, Stefania A1 - Pierce, Benjamin F. A1 - Piluso, Susanna A1 - Wischke, Christian A1 - Lendlein, Andreas A1 - Neffe, Axel T. T1 - Design of Decorin-Based Peptides That Bind to CollagenI and their Potential as Adhesion Moieties in Biomaterials JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Mimicking the binding epitopes of protein-protein interactions by using small peptides is important for generating modular biomimetic systems. A strategy is described for the design of such bioactive peptides without accessible structural data for the targeted interaction, and the effect of incorporating such adhesion peptides in complex biomaterial systems is demonstrated. The highly repetitive structure of decorin was analyzed to identify peptides that are representative of the inner and outer surface, and it was shown that only peptides based on the inner surface of decorin bind to collagen. The peptide with the highest binding affinity for collagenI, LHERHLNNN, served to slow down the diffusion of a conjugated dye in a collagen gel, while its dimer could physically crosslink collagen, thereby enhancing the elastic modulus of the gel by one order of magnitude. These results show the potential of the identified peptides for the design of biomaterials for applications in regenerative medicine. KW - biomaterials KW - collagen KW - gels KW - peptides KW - protein-protein interactions Y1 - 2015 U6 - https://doi.org/10.1002/anie.201505227 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 37 SP - 10980 EP - 10984 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Federico, Stefania A1 - Nöchel, Ulrich A1 - Löwenberg, Candy A1 - Lendlein, Andreas A1 - Neffe, Axel T. T1 - Supramolecular hydrogel networks formed by molecular recognition of collagen and a peptide grafted to hyaluronic acid JF - Acta biomaterialia N2 - The extracellular matrix (ECM) is a nano-structured, highly complex hydrogel, in which the macromolecules are organized primarily by non-covalent interactions. Here, in a biomimetic approach, the decorin-derived collagen-binding peptide LSELRLHNN was grafted to hyaluronic acid (HA) in order to enable the formation of a supramolecular hydrogel network together with collagen. The storage modulus of a mixture of collagen and HA was increased by more than one order of magnitude (G′ = 157 Pa) in the presence of the HA-grafted peptide compared to a mixture of collagen and HA (G′ = 6 Pa). The collagen fibril diameter was decreased, as quantified using electron microscopy, in the presence of the HA-grafted peptide. Here, the peptide mimicked the function of decorin by spatially organizing collagen. The advantage of this approach is that the non-covalent crosslinks between collagen molecules and the HA chains created by the peptide form a reversible and dynamic hydrogel, which could be employed for a diverse range of applications in regenerative medicine. Statement of Significance Biopolymers of the extracellular matrix (ECM) like collagen or hyaluronan are attractive starting materials for biomaterials. While in biomaterial science covalent crosslinking is often employed, in the native ECM, stabilization and macromolecular organization is primarily based on non-covalent interactions, which allows dynamic changes of the materials. Here, we show that collagen-binding peptides, derived from the small proteoglycan decorin, grafted to hyaluronic acid enable supramolecular stabilization of collagen hydrogels. These hydrogels have storage moduli more than one order of magnitude higher than mixtures of collagen and hyaluronic acid. Furthermore, the peptide supported the structural organization of collagen. Such hydrogels could be employed for a diverse range of applications in regenerative medicine. Furthermore, the rational design helps in the understanding ECM structuring. KW - Biopolymers KW - Collagen-binding peptide KW - Hyaluronic acid KW - Hydrogels KW - Mechanical properties Y1 - 2016 U6 - https://doi.org/10.1016/j.actbio.2016.04.018 SN - 1742-7061 SN - 1878-7568 VL - 38 SP - 1 EP - 10 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Khudair, Mohammed A1 - Marcuzzi, Anna A1 - Ng, Kwok A1 - Tempest, Gavin Daniel A1 - Bartoš, František A1 - Peric, Ratko A1 - Maier, Maximilian A1 - Beccia, Flavia A1 - Boccia, Stefania A1 - Brandes, Mirko A1 - Cardon, Greet A1 - Carlin, Angela A1 - Castagna, Carolina A1 - Chaabene, Helmi A1 - Chalkley, Anna A1 - Ciaccioni, Simone A1 - Cieślińska-Świder, Joanna A1 - Čingienė, Vilma A1 - Cortis, Cristina A1 - Corvino, Chiara A1 - de Geus, Eco J. C. A1 - Di Baldassarre, Angela A1 - Di Credico, Andrea A1 - Drid, Patrik A1 - Tarazaga, Rosa Ma Fernández A1 - Gallè, Francesca A1 - Sánchez, Esther Garcia A1 - Gebremariam, Mekdes A1 - Ghinassi, Barbara A1 - Goudas, Marios A1 - Hayes, Grainne A1 - Honorio, Samuel A1 - Izzicupo, Pascal A1 - Jahre, Henriette A1 - Jelsma, Judith A1 - Juric, Petra A1 - Kolovelonis, Athanasios A1 - Kongsvold, Atle A1 - Kouidi, Evangelia A1 - Mansergh, Fiona A1 - Masanovic, Bojan A1 - Mekonnen, Teferi A1 - Mork, Paul Jarle A1 - Murphy, Marie A1 - O'Hara, Kelly A1 - Torun, Ayse Ozbil A1 - Palumbo, Federico A1 - Popovic, Stevo A1 - Prieske, Olaf A1 - Puharic, Zrinka A1 - Ribeiro, José Carlos A1 - Rumbold, Penny Louise Sheena A1 - Sandu, Petru A1 - Soric, Maroje A1 - Stavnsbo, Mette A1 - Syrmpas, Ioannis A1 - van der Ploeg, Hidde P. A1 - Van Hoye, Aurélie A1 - Vilela, Sofia A1 - Woods, Catherine A1 - Wunsch, Kathrin A1 - Caprinica, Laura A1 - MacDonncha, Ciaran A1 - Ling, Fiona Chun Man T1 - DE-PASS Best Evidence Statement (BESt): modifiable determinants of physical activity and sedentary behaviour in children and adolescents aged 5-19 years-a protocol for systematic review and meta-analysis JF - BMJ open N2 - Introduction Physical activity among children and adolescents remains insufficient, despite the substantial efforts made by researchers and policymakers. Identifying and furthering our understanding of potential modifiable determinants of physical activity behaviour (PAB) and sedentary behaviour (SB) is crucial for the development of interventions that promote a shift from SB to PAB. The current protocol details the process through which a series of systematic literature reviews and meta-analyses (MAs) will be conducted to produce a best-evidence statement (BESt) and inform policymakers. The overall aim is to identify modifiable determinants that are associated with changes in PAB and SB in children and adolescents (aged 5-19 years) and to quantify their effect on, or association with, PAB/SB. Methods and analysis A search will be performed in MEDLINE, SportDiscus, Web of Science, PsychINFO and Cochrane Central Register of Controlled Trials. Randomised controlled trials (RCTs) and controlled trials (CTs) that investigate the effect of interventions on PAB/SB and longitudinal studies that investigate the associations between modifiable determinants and PAB/SB at multiple time points will be sought. Risk of bias assessments will be performed using adapted versions of Cochrane's RoB V.2.0 and ROBINS-I tools for RCTs and CTs, respectively, and an adapted version of the National Institute of Health's tool for longitudinal studies. Data will be synthesised narratively and, where possible, MAs will be performed using frequentist and Bayesian statistics. Modifiable determinants will be discussed considering the settings in which they were investigated and the PAB/SB measurement methods used. Ethics and dissemination No ethical approval is needed as no primary data will be collected. The findings will be disseminated in peer-reviewed publications and academic conferences where possible. The BESt will also be shared with policy makers within the DE-PASS consortium in the first instance. Systematic review registration CRD42021282874. KW - public health KW - health policy KW - community child health Y1 - 2022 U6 - https://doi.org/10.1136/bmjopen-2021-059202 SN - 2044-6055 VL - 12 IS - 9 PB - BMJ Publishing Group CY - London ER -