TY - JOUR A1 - Nomosatryo, Sulung A1 - Tjallingii, Rik A1 - Henny, Cynthia A1 - Ridwansyah, Iwan A1 - Wagner, Dirk A1 - Tomás, Sara A1 - Kallmeyer, Jens T1 - Surface sediment composition and depositional environments in tropical Lake Sentani, Papua Province, Indonesia JF - Journal of Paleolimnology N2 - Tropical Lake Sentani in the Indonesian Province Papua consists of four separate basins and is surrounded by a catchment with a very diverse geology. We characterized the surface sediment (upper 5 cm) of the lake's four sub-basins based on multivariate statistical analyses (principal component analysis, hierarchical clustering) of major element compositions obtained by X-ray fluorescence scanning. Three types of sediment are identified based on distinct compositional differences between rivers, shallow/proximal and deep/distal lake sediments. The different sediment types are mainly characterized by the correlation of elements associated with redox processes (S, Mn, Fe), carbonates (Ca), and detrital input (Ti, Al, Si, K) derived by river discharge. The relatively coarse-grained river sediments mainly derive form the mafic catchment geology and contribution of the limestone catchment geology is only limited. Correlation of redox sensitive and detrital elements are used to reveal oxidation conditions, and indicate oxic conditions in river samples and reducing conditions for lake sediments. Organic carbon (TOC) generally correlates with redox sensitive elements, although a correlation between TOC and individual elements change strongly between the three sediment types. Pyrite is the quantitatively dominant reduced sulfur mineral, monosulfides only reach appreciable concentrations in samples from rivers draining mafic and ultramafic catchments. Our study shows large spatial heterogeneity within the lake's sub-basins that is mainly caused by catchment geology and topography, river runoff as well as the bathymetry and the depth of the oxycline. We show that knowledge about lateral heterogeneity is crucial for understanding the geochemical and sedimentological variations recorded by these sediments. The highly variable conditions make Lake Sentani a natural laboratory, with its different sub-basins representing different depositional environments under identical tropical climate conditions. KW - Tropical lake KW - Lacustrine sediment KW - XRF analysis KW - Multivariate KW - statistics Y1 - 2022 U6 - https://doi.org/10.1007/s10933-022-00259-4 SN - 0921-2728 SN - 1573-0417 PB - Springer CY - Dordrecht ER - TY - JOUR A1 - Amour, Frederic A1 - Mutti, Maria A1 - Christ, Nicolas A1 - Immenhauser, Adrian A1 - Agar, Susan M. A1 - Benson, Gregory S. A1 - Tomas, Sara A1 - Alway, Robert A1 - Kabiri, Lachen T1 - Capturing and modelling metre-scale spatial facies heterogeneity in a Jurassic ramp setting (Central High Atlas, Morocco) JF - Sedimentology : the journal of the International Association of Sedimentologists N2 - Each simulation algorithm, including Truncated Gaussian Simulation, Sequential Indicator Simulation and Indicator Kriging is characterized by different operating modes, which variably influence the facies proportion, distribution and association of digital outcrop models, as shown in clastic sediments. A detailed study of carbonate heterogeneity is then crucial to understanding these differences and providing rules for carbonate modelling. Through a continuous exposure of Bajocian carbonate strata, a study window (320 m long, 190 m wide and 30 m thick) was investigated and metre-scale lithofacies heterogeneity was captured and modelled using closely-spaced sections. Ten lithofacies, deposited in a shallow-water carbonate-dominated ramp, were recognized and their dimensions and associations were documented. Field data, including height sections, were georeferenced and input into the model. Four models were built in the present study. Model A used all sections and Truncated Gaussian Simulation during the stochastic simulation. For the three other models, Model B was generated using Truncated Gaussian Simulation as for Model A, Model C was generated using Sequential Indicator Simulation and Model D was generated using Indicator Kriging. These three additional models were built by removing two out of eight sections from data input. The removal of sections allows direct insights on geological uncertainties at inter-well spacings by comparing modelled and described sections. Other quantitative and qualitative comparisons were carried out between models to understand the advantages/disadvantages of each algorithm. Model A is used as the base case. Indicator Kriging (Model D) simplifies the facies distribution by assigning continuous geological bodies of the most abundant lithofacies to each zone. Sequential Indicator Simulation (Model C) is confident to conserve facies proportion when geological heterogeneity is complex. The use of trend with Truncated Gaussian Simulation is a powerful tool for modelling well-defined spatial facies relationships. However, in shallow-water carbonate, facies can coexist and their association can change through time and space. The present study shows that the scale of modelling (depositional environment or lithofacies) involves specific simulation constraints on shallow-water carbonate modelling methods. KW - 3D facies modelling KW - carbonate ramp KW - facies heterogeneity KW - Jurassic KW - modelling algorithms KW - scale Y1 - 2012 U6 - https://doi.org/10.1111/j.1365-3091.2011.01299.x SN - 0037-0746 VL - 59 IS - 4 SP - 1158 EP - 1189 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Tomas, Sara A1 - Zitzmann, Max A1 - Homann, Martin A1 - Rumpf, Michael A1 - Amour, Frederic A1 - Benisek, Merle-Friederike A1 - Betzler, Christian A1 - Mutti, Maria T1 - From ramp to platform : building a 3D model of depositional geometries and facies architectures in transitional carbonates in the Miocene, northern Sardinia N2 - The depositional geometry and facies distribution of an Early Miocene (Burdigalian) carbonate system in the Perfugas Basin (NW Sardinia) comprise a well-exposed example of a transition from a ramp to a steep-flanked platform. The carbonate succession (Sedini Limestone Unit) is composed of two depositional sequences separated by a major erosional unconformity. The lower (sequence 1) records a ramp dominated by heterozoan producers and the upper (sequence 2) is dominated by photozoan producers and displays a gradual steepening of the depositional profile into a steep- flanked platform. This paper shows the process of creating a digital outcrop model including a facies model. This process consists of combining field data sets, including 17 sedimentary logs, and a spatial dataset consisting of differential global positioning system data points measured along key stratigraphic surfaces and sedimentary logs, with the goal of locking traditional field observations into a 3D spatial model. Establishing a precise geometrical framework and visualizing the overall change in the platform geometry and the related vertical and lateral facies variations of the Sedini carbonate platform, allows us to better understand the sedimentary processes leading to the geometrical turn- over of the platform. Furthermore, a detailed facies modeling helps us to gain insight into the detailed depositional dynamics. The final model reproduces faithfully the depositional geometries observed in the outcrops and helps in understanding the relationships between facies and architectural framework at the basin scale. Moreover, it provides the basis to characterize semiquantitatively regional sedimentological features and to make further reservoir and subsurface analogue studies. Y1 - 2010 UR - http://www.springerlink.com/content/110833 U6 - https://doi.org/10.1007/s10347-009-0203-7 SN - 0172-9179 ER - TY - JOUR A1 - Amour, Frederic A1 - Mutti, Maria A1 - Christ, Nicolas A1 - Immenhauser, Adrian A1 - Benson, Gregory S. A1 - Agar, Susan M. A1 - Tomas, Sara A1 - Kabiri, Lahcen T1 - Outcrop analog for an oolitic carbonate ramp reservoir a scale-dependent geologic modeling approach based on stratigraphic hierarchy JF - AAPG bulletin N2 - Considerable effort has been devoted to the development of simulation algorithms for facies modeling, whereas a discussion of how to combine those techniques has not existed. The integration of multiple geologic data into a three-dimensional model, which requires the combination of simulation techniques, is yet a current challenge for reservoir modeling. This article presents a thought process that guides the acquisition and modeling of geologic data at various scales. Our work is based on outcrop data collected from a Jurassic carbonate ramp located in the High Atlas mountain range of Morocco. The study window is 1 km (0.6 mi) wide and 100 m (328.1 ft) thick. We describe and model the spatial and hierarchical arrangement of carbonate bodies spanning from largest to smallest: (1) stacking pattern of high-frequency depositional sequences, (2) facies association, and (3) lithofacies. Five sequence boundaries were modeled using differential global position system mapping and light detection and ranging data. The surface-based model shows a low-angle profile with modest paleotopographic relief at the inner-to-middle ramp transition. Facies associations were populated using truncated Gaussian simulation to preserve ordered trends between the inner, middle, and outer ramps. At the lithofacies scale, field observations and statistical analysis show a mosaiclike distribution that was simulated using a fully stochastic approach with sequential indicator simulation. This study observes that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The selection and implementation of different techniques customized for each level of the stratigraphic hierarchy will provide the essential computing flexibility to model carbonate settings. This study demonstrates that a scale-dependent modeling approach should be a common procedure when building subsurface and outcrop models. Y1 - 2013 U6 - https://doi.org/10.1306/10231212039 SN - 0149-1423 VL - 97 IS - 5 SP - 845 EP - 871 PB - American Association of Petroleum Geologists CY - Tulsa ER - TY - JOUR A1 - Tomas, Sara A1 - Homann, Martin A1 - Mutti, Maria A1 - Amour, Frederic A1 - Christ, Nicolas A1 - Immenhauser, Adrian A1 - Agar, Susan M. A1 - Kabiri, Lahcen T1 - Alternation of microbial mounds and ooid shoals (Middle Jurasssic, Morocco) - response to paleoenvironmental changes JF - Sedimentary geology : international journal of applied and regional sedimentology N2 - The occurrence of neritic microbial carbonates is often related to ecological refuges, where grazers and other competitors are reduced by environmental conditions, or to post-extinction events (e.g. in the Late Devonian, Early Triassic). Here, we present evidence for Middle Jurassic (Bajocian) microbial mounds formed in the normal marine, shallow neritic setting of an inner, ramp system from the High Atlas of Morocco. The microbial mounds are embedded in cross-bedded oolitic facies. Individual mounds show low relief domal geometries (up to 3 m high and 4.5 m across), but occasionally a second generation of mounds exhibits tabular geometries (<1 m high). The domes are circular in plan view and have intact tops, lacking evidence of current influence on mound preferred growth direction or distribution patterns, or truncation. The mound fades consists almost entirely of non-laminated, micritic thrombolites with branching morphologies and fine-grained, clotted and peloidal fabrics. Normal marine biota are present but infrequent. Several lines of evidence document that microbial mound growth alternates with time intervals of active ooid shoal deposition. This notion is of general significance when compared with modern Bahamian microbialites that co-exist with active sub-aquatic dunes. Furthermore, the lack of detailed studies of Middle Jurassic, normal marine shallow neritic microbial mounds adds a strong motivation for the present study. Specifically, Bajocian mounds formed on a firmground substratum during transgressive phases under condensed sedimentation. Furthermore, a transient increase in nutrient supply in the prevailing mesotrophic setting, as suggested by the heterotrophic-dominated biota, may have controlled microbial mound stages. KW - Microbial mounds KW - Thrombolites KW - Ooid shoals KW - Paleoenvironment KW - Jurassic Y1 - 2013 U6 - https://doi.org/10.1016/j.sedgeo.2013.05.008 SN - 0037-0738 VL - 294 SP - 68 EP - 82 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Christ, Nicolas A1 - Immenhauser, Adrian A1 - Amour, Frederic A1 - Mutti, Maria A1 - Tomas, Sara A1 - Agar, Susan M. A1 - Alway, Robert A1 - Kabiri, Lahcen T1 - Characterization and interpretation of discontinuity surfaces in a Jurassic ramp setting (High Atlas, Morocco) JF - Sedimentology : the journal of the International Association of Sedimentologists N2 - Discontinuity surfaces are widely recognized but often poorly understood features of epeiric carbonate settings. In sedimentary systems, these features often represent hiatus surfaces below biostratigraphic resolution and may represent a considerable portion of the time contained in the sediment record. From an applied perspective, discontinuities may represent horizontal flow barriers and result in reservoir compartmentalization. Here, a total of 80 condensed surfaces (S1), firmgrounds (S2) and hardgrounds (S3) from a Jurassic (Middle and Upper Bajocian Assoul Formation) ramp setting of the High Atlas in Morocco are carefully documented with respect to their morphology, their secondary impregnation by Fe and Mn oxides and phosphates and their palaeoecological record. A statistical frequency distribution of two surfaces of the S1 type, 1.1 surfaces of the S2 type and 0.4 surfaces of the S3 type per 10 section metres is observed along a 220 m long carbonate succession. Based on two stratigraphically and spatially separated study windows and correlative sections, the stratigraphic frequency distribution, the lateral extent and the nature of facies change across discontinuities are documented in a quantitative manner. Specific features of the study site include the considerable stratigraphic thickness of the Assoul Formation and the conspicuous absence of subaerial-exposure-related features. Based on the data presented here, firmground and hardground surfaces are best interpreted as maximum-regression-related features. Relative sea-level lowstand results in a lowered wave base, and wave orbitals and currents result in sea floor omission and lithification. Care must be taken to avoid overly simplistic interpretations, as differences in bathymetry and carbonate facies result in marked changes in discontinuity characteristics in proximal-distal transects. The data shown here are of significance for those concerned with the interpretation of shoal water carbonate environments and are instrumental in the building of more realistic carbonate reservoir flow models. KW - Atlas Mountains KW - carbonate ramp KW - discontinuity surfaces KW - hardgrounds KW - hydrodynamic level KW - Jurassic KW - palaeoecology KW - relative sea-level Y1 - 2012 U6 - https://doi.org/10.1111/j.1365-3091.2011.01251.x SN - 0037-0746 VL - 59 IS - 1 SP - 249 EP - 290 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Shekhar, R. A1 - Sahni, I. A1 - Benson, Gregory S. A1 - Agar, Susan M. A1 - Amour, Frédéric A1 - Tomas, Sara A1 - Christ, Nicolas A1 - Alway, Robert A1 - Mutti, Maria A1 - Immenhauser, A. A1 - Karcz, Z. A1 - Kabiri, L. T1 - Modelling and simulation of a Jurassic carbonate ramp outcrop, Amellago, High Atlas Mountains, Morocco JF - Petroleum geoscience N2 - Carbonate reservoirs pose significant challenges for reservoir modelling and flow prediction due to heterogeneities in rock properties, limits to seismic resolution and limited constraints on subsurface data. Hence, a systematic and streamlined approach is needed to construct geological models and to quickly evaluate key sensitivities in the flow models. This paper discusses results from a reservoir analogue study of a Middle Jurassic carbonate ramp in the High Atlas Mountains of Morocco that has stratigraphic and structural similarities to selected Middle East reservoirs. For this purpose, high-resolution geological models were constructed from the integration of sedimentological, diagenetic and structural studies in the area. The models are approximately 1200 x 1250 m in size, and only faults (no fractures) with offsets greater than 1 m are included. Novel methods have been applied to test the response of flow simulations to the presence or absence of specific geological features, including proxies for hardgrounds, stylolites, patch reefs, and mollusc banks, as a way to guide the level of detail that is suitable for modelling objectives. Our general conclusion from the study is that the continuity of any geological feature with extreme permeability (high or low) has the most significant impact on flow. Y1 - 2014 U6 - https://doi.org/10.1144/petgeo2013-010 SN - 1354-0793 VL - 20 IS - 1 SP - 109 EP - 123 PB - Geological Soc. Publ. House CY - Bath ER - TY - JOUR A1 - Tomás, Sara A1 - Aurell, Marcos A1 - Badenas, Beatriz A1 - Bjorge, Merle A1 - Duaso, Maria A1 - Mutti, Maria T1 - Architecture and Paleoenvironment of Mid-Jurassic Microbial–Siliceous Sponge Mounds, Northeastern Spain JF - Journal of sedimentary research N2 - The occurrence of mounds dominated by siliceous sponges and microbialites is often related to distal, deep settings of middle ramps and shelves. This paper presents evidence for Bajocian (Garanliana garantiana Zone) microbial-siliceous sponge mounds formed in open marine but relatively shallow settings of a ramp from the Iberian Basin of eastern Spain. Marked differences in mound spacing, morphology, and composition of the related intermound facies are observed from distal to more proximal settings. The distal (below storm wave base) settings are characterized by alternating tabular-bedded marls and limestones rich in pelagic fossils (ammonites, belemnites), open-marine thin-shelled bivalves (Bositra-like), as well as peloids, which include widely or randomly spaced isolated, small (up to 0.4 m high) and larger (up to 2.5 m high) mounds with upward accretion. The intermediate (near to above storm wave base) settings show tabular, thickened beds of peloidal and/or intraclastic limestones with closely spaced mounds (similar to 1 m high), which often coalesce laterally, forming extensive lenticular structures (up to 10 m wide). The proximal (above storm wave base) depositional settings consist of tabular to irregular beds of intraclastic limestones with widely spaced small (up to 0.4 m high) mounds with mainly tabular geometries. The mound framework contains variable proportions of microbialites (dense to clotted peloidal thrombolitic fabrics) and siliceous sponges (hexactinellids and lithistids in similar proportion) ranging from planar to conic shapes. These morphological and compositional changes allow characterizing three shallowing-upward sequences (sequences 1-3) developed in the overall regressive trend of a basin-wide, upper Bajocian T-R cycle. Episodic wave reworking of the early-cemented mounds resulted in the formation of peloids, small rounded intraclasts, and large, rounded or subangular intraclasts. These nonskeletal micritic grains show internal fabrics related to those of the mound and/or microbialites. A progressive textural gradation towards greater size and lesser roundness of the nonskeletal grains in the areas in the vicinity of the main mound factory is documented (i.e., from large, subangular intraclasts in the areas close to the main mound factory to peloids in the areas that are far from it). We discuss the alternative model of internal waves (instead of storm-induced waves) as the hydrodynamic agent providing the high-energy events needed to explain the origin of the peloidal-intraclastic intermound facies and, likely, also the nutrients needed by the microbialites and siliceous sponges to grow. Y1 - 2019 U6 - https://doi.org/10.2110/jsr.2019.5 SN - 1527-1404 SN - 1938-3681 VL - 89 IS - 2 SP - 110 EP - 134 PB - Society for Sedimentary Geology CY - Tulsa ER - TY - JOUR A1 - Tomas, Sara A1 - Frijia, Gianluca A1 - Boemelburg, Esther A1 - Zamagni, Jessica A1 - Perrin, Christine A1 - Mutti, Maria T1 - Evidence for seagrass meadows and their response to paleoenvironmental changes in the early Eocene (Jafnayn Formation, Wadi Bani Khalid, N Oman) JF - Sedimentary geology : international journal of applied and regional sedimentology N2 - The recognition and understanding of vegetated habitats in the fossil record are of crucial importance in order to investigate paleoecological responses and indirectly infer climate and sea-level changes. However, the low preservation potential of plants and macroalgae hampers a direct identification of these environments in the geological past. Here we present sedimentological and paleontological evidences as tool to identify the presence of different seagrass-vegetated environments in the shallow marine settings of the lower Eocene jafnayn platform of Oman and their responses to paleoenvironmental changes. The studied lower Eocene deposits consist of well bedded, nodular pacicstones dominated by encrusting acervulinid and alveolinid foraminifera passing upward to an alternance of packstones with echinoids and quartz grains and grainstones rich in Orbitolites, smaller miliolid foraminifera and quartz grains. The presence of seagrass is inferred by the occurrence of encrusting acervulinids and soritid Orbitolites, as well as by their test morphologies together with further sedimentological criteria. The clear shift observed in the faunal assemblages and sedimentary features may be related to a major reorganization of the carbonate system passing from a carbonate platform to a ramp-like platform with increased terrigenous sedimentation. Heterotroph tubular acervulinids and oligotroph alveolinids of the carbonate platform were replaced upward by more heterotroph organisms such as large, discoidal Orbitolites and smaller miliolids, most likely due to enhanced nutrient levels which would have led to a change of phytal substrate, from cylindrical-leaf dominated grasses into flat-leafed ones. (C) 2016 Elsevier B.V. All rights reserved. KW - Epiphytic foraminifera KW - Seagrasses KW - Paleoenvironment KW - Early Eocene KW - Oman Y1 - 2016 U6 - https://doi.org/10.1016/j.sedgeo.2016.05.016 SN - 0037-0738 SN - 1879-0968 VL - 341 SP - 189 EP - 202 PB - Elsevier CY - Amsterdam ER -