TY - JOUR A1 - Fernandez, R. A1 - Cabeza, Sandra A1 - Mishurova, Tatiana A1 - Fernandez-Castrillo, P. A1 - Gonzalez-Doncel, Gaspar A1 - Bruno, Giovanni T1 - Residual stress and yield strength evolution with annealing treatments in an age-hardenable aluminum alloy matrix composite JF - Materials Science and Engineering: A N2 - We investigated the possibility of minimizing tensile matrix residual stresses in age hardenable aluminum alloy metal matrix composites without detrimentally affect their mechanical properties (such as yield strength). Specifically, we performed thermal treatments at different temperatures and times in an age-hardenable aluminum matrix composite 2014Al-15vol%Al2O3. Using X-ray synchrotron radiation diffraction and mechanical tests, we show that below a certain treatment temperature (250 degrees C) it is possible to identify an appropriate thermal treatment capable of relaxing residual stress in this composite while even increasing its yield strength, with respect to the as processed conditions. KW - Residual stress KW - Yield strength KW - Annealing treatment KW - Metal matrix composite KW - Diffraction Y1 - 2018 U6 - https://doi.org/10.1016/j.msea.2018.06.031 SN - 0921-5093 SN - 1873-4936 VL - 731 SP - 344 EP - 350 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Fernandez, Ricardo A1 - Bruno, Giovanni A1 - Garces, Gerardo A1 - Nieto-Luis, H. A1 - Gonzalez-Doncel, Gaspar T1 - Fractional brownian motion of dislocations during creep deformation of metals JF - Materials science & engineering. A, Structural materials N2 - The present work offers an explanation on how the long-range interaction of dislocations influences their movement, and therefore the strain, during creep of metals. It is proposed that collective motion of dislocations can be described as a fractional Brownian motion. This explains the noisy appearance of the creep strain signal as a function of time. Such signal is split into a deterministic and a stochastic part. These terms can be related to two kinds of dislocation motions: individual and collective, respectively. The description is consistent with the fractal nature of strain-induced dislocation structures predicated in previous works. Moreover, it encompasses the evolution of the strain rate during all stages of creep, including the tertiary one. Creep data from Al99.8% and Al3.85%Mg tested at different temperatures and stresses are used to validate the proposed ideas: it is found that different creep stages present different diffusion characters, and therefore different dislocation motion character. KW - Creep KW - Aluminum alloys KW - Dislocation motion KW - Diffusion KW - Fractal KW - structures Y1 - 2020 U6 - https://doi.org/10.1016/j.msea.2020.140013 SN - 0921-5093 SN - 1873-4936 VL - 796 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Fernandez, Ricardo A1 - Gonzalez-Doncel, Gaspar A1 - Garces, Gerardo A1 - Bruno, Giovanni T1 - Towards a comprehensive understanding of creep BT - microstructural dependence of the pre-exponential term in Al JF - Materials science & engineering. A, Structural materials: properties, microstructure and processing N2 - We show that the equation proposed by Takeuchi and Argon to explain the creep behavior of Al-Mg solid solution can be used to describe also the creep behavior of pure aluminum. In this frame, it is possible to avoid the use of the classic pre-exponential fitting parameter in the power law equation to predict the minimum creep strain rate. The effect of the fractal arrangement of dislocations, developed at the mesoscale, must be considered to fully explain the experimental data. These ideas allow improving the recently introduced SSTC model, fully describing the primary and secondary creep regimes of aluminum alloys without the need for fitting. Creep data from commercially pure A199.8% and Al-Mg alloys tested at different temperatures and stresses are used to validate the proposed ideas. KW - creep KW - Aluminum alloys KW - dislocations KW - fractal KW - stress exponent Y1 - 2020 U6 - https://doi.org/10.1016/j.msea.2020.139036 SN - 0921-5093 SN - 1873-4936 VL - 776 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Cabeza, Sandra A1 - Müller, Bernd R. A1 - Pereyra, Ricio A1 - Fernandez, Ricardo A1 - Gonzalez-Doncel, Gaspar A1 - Bruno, Giovanni T1 - Evidence of damage evolution during creep of Al-Mg alloy using synchrotron X-ray refraction JF - Journal of applied crystallography N2 - In order to provide further evidence of damage mechanisms predicted by the recent solid-state transformation creep (SSTC) model, direct observation of damage accumulation during creep of Al-3.85Mg was made using synchrotron X-ray refraction. X-ray refraction techniques detect the internal specific surface (i.e. surface per unit volume) on a length scale comparable to the specimen size, but with microscopic sensitivity. A significant rise in the internal specific surface with increasing creep time was observed, providing evidence for the creation of a fine grain substructure, as predicted by the SSTC model. This substructure was also observed by scanning electron microscopy. KW - aluminium alloys KW - creep KW - damage KW - synchrotron X-ray refraction KW - electron microscopy KW - subgrain structure Y1 - 2018 U6 - https://doi.org/10.1107/S1600576718001449 SN - 1600-5767 VL - 51 SP - 420 EP - 427 PB - International Union of Crystallography CY - Chester ER - TY - JOUR A1 - Fernandez Serrano, Ricardo A1 - Bruno, Giovanni A1 - Gonzalez-Doncel, Gaspar T1 - Fractal nature of aluminum alloys substructures under creep and its implications JF - Journal of applied physics N2 - The present work offers an explanation for the variation of the power-law stress exponent, n, with the stress sigma normalized to the shear modulus G in aluminum alloys. The approach is based on the assumption that the dislocation structure generated with deformation has a fractal nature. It fully explains the evolution of n with sigma/G even beyond the so-called power law breakdown region. Creep data from commercially pure Al99.8%, Al-3.85%Mg, and ingot AA6061 alloy tested at different temperatures and stresses are used to validate the proposed ideas. Finally, it is also shown that the fractal description of the dislocation structure agrees well with current knowledge. Published by AIP Publishing. Y1 - 2018 U6 - https://doi.org/10.1063/1.5012035 SN - 0021-8979 SN - 1089-7550 VL - 123 IS - 14 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Serrano-Munoz, Itziar A1 - Fernández Serrano, Ricardo A1 - Saliwan-Neumann, Romeo A1 - Gonzalez-Doncel, Gaspar A1 - Bruno, Giovanni T1 - Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction JF - Journal of applied crystallography / International Union of Crystallography N2 - In the present work, electron backscatter diffraction was used to determine the microscopic dislocation structures generated during creep (with tests interrupted at the steady state) in pure 99.8% aluminium. This material was investigated at two different stress levels, corresponding to the power-law and power-law breakdown regimes. The results show that the formation of subgrain cellular structures occurs independently of the crystallographic orientation. However, the density of these cellular structures strongly depends on the grain crystallographic orientation with respect to the tensile axis direction, with (111) grains exhibiting the highest densities at both stress levels. It is proposed that this behaviour is due to the influence of intergranular stresses, which is different in (111) and (001) grains. KW - creep KW - pure aluminium KW - electron backscatter diffraction (EBSD) KW - cellular KW - structures KW - power law and power-law breakdown Y1 - 2022 U6 - https://doi.org/10.1107/S1600576722005209 SN - 1600-5767 VL - 55 SP - 860 EP - 869 PB - Munksgaard CY - Copenhagen ER -