TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - JOUR A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-Soluble Cellulose Derivatives Are Sustainable Additives for Biomimetic Calcium Phosphate Mineralization JF - Inorganics : open access journal N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2016 U6 - https://doi.org/10.3390/inorganics4040033 SN - 2304-6740 VL - 4 PB - MDPI CY - Basel ER - TY - JOUR A1 - Vandenhouten, Ralf A1 - Behrens, Thomas A1 - Schnor, Bettina T1 - Entwicklung eines Gatewaysystems für telematikbasiertes Gerätemonitoring Y1 - 2004 SN - 0949-8214 ER - TY - JOUR A1 - Behrens, Maik A1 - Frank, Oliver A1 - Rawel, Harshadrai Manilal A1 - Ahuja, Gaurav A1 - Potting, Christoph A1 - Hofmann, Thomas A1 - Meyerhof, Wolfgang A1 - Korsching, Sigrun T1 - ORA1, a Zebrafish Olfactory Receptor Ancestral to All Mammalian V1R Genes, Recognizes 4-Hydroxyphenylacetic Acid, a Putative Reproductive Pheromone JF - The journal of biological chemistry N2 - The teleost v1r-related ora genes are a small, highly conserved olfactory receptor gene family of only six genes, whose direct orthologues can be identified in lineages as far as that of cartilaginous fish. However, no ligands for fish olfactory receptor class A related genes (ORA) had been uncovered so far. Here we have deorphanized the ORA1 receptor using heterologous expression and calcium imaging. We report that zebrafish ORA1 recognizes with high specificity and sensitivity 4-hydroxyphenylacetic acid. The carboxyl group of this compound is required in a particular distance from the aromatic ring, whereas the hydroxyl group in the para-position is not essential, but strongly enhances the binding efficacy. Low concentrations of 4-hydroxyphenylacetic acid elicit increases in oviposition frequency in zebrafish mating pairs. This effect is abolished by naris closure. We hypothesize that 4-hydroxyphenylacetic acid might function as a pheromone for reproductive behavior in zebrafish. ORA1 is ancestral to mammalian V1Rs, and its putative function as pheromone receptor is reminiscent of the role of several mammalian V1Rs as pheromone receptors. Y1 - 2014 U6 - https://doi.org/10.1074/jbc.M114.573162 SN - 0021-9258 SN - 1083-351X VL - 289 IS - 28 SP - 19778 EP - 19788 PB - American Society for Biochemistry and Molecular Biology CY - Bethesda ER - TY - JOUR A1 - Debatin, Franziska A1 - Möllmer, Jens A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Möller, Andreas A1 - Staudt, Reiner A1 - Thomas, Arne A1 - Holdt, Hans-Jürgen T1 - Mixed gas adsorption of carbon dioxide and methane on a series of isoreticular microporous metal-organic frameworks based on 2-substituted imidazolate-4-amide-5-imidates JF - Journal of materials chemistry N2 - In this work the adsorption of CO2 and CH4 on a series of isoreticular microporous metal-organic frameworks based on 2-substituted imidazolate-4-amide-5-imidates, IFP-1-IFP-6 (IFP Imidazolate Framework Potsdam), is studied firstly by pure gas adsorption at 273 K. All experimental isotherms can be nicely described by using the Toth isotherm model and show the preferred adsorption of CO2 over CH4. At low pressures the Toth isotherm equation exhibits a Henry region, wherefore Henry's law constants for CO2 and CH4 uptake could be determined and ideal selectivity (alpha CO2/CH4) has been calculated. Secondly, selectivities were calculated from mixture data by using nearly equimolar binary mixtures of both gases by a volumetric-chromatographic method to examine the IFPs. Results showed the reliability of the selectivity calculation. Values of (alpha CO2/CH4) around 7.5 for IFP-5 indicate that this material shows much better selectivities than IFP-1, IFP-2, IFP-3, IFP-4 and IFP-6 with slightly lower selectivity (alpha CO2/CH4) = 4-6. The preferred adsorption of CO2 over CH4 especially of IFP-5 and IFP-4 makes these materials suitable for gas separation application. Y1 - 2012 U6 - https://doi.org/10.1039/c2jm15811f SN - 0959-9428 VL - 22 IS - 20 SP - 10221 EP - 10227 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Balischewski, Christian A1 - Choi, Hyung-Seok A1 - Behrens, Karsten A1 - Beqiraj, Alkit A1 - Körzdörfer, Thomas A1 - Gessner, Andre A1 - Wedel, Armin A1 - Taubert, Andreas T1 - Metal sulfide nanoparticle synthesis with ionic liquids state of the art and future perspectives JF - ChemistryOpen N2 - Metal sulfides are among the most promising materials for a wide variety of technologically relevant applications ranging from energy to environment and beyond. Incidentally, ionic liquids (ILs) have been among the top research subjects for the same applications and also for inorganic materials synthesis. As a result, the exploitation of the peculiar properties of ILs for metal sulfide synthesis could provide attractive new avenues for the generation of new, highly specific metal sulfides for numerous applications. This article therefore describes current developments in metal sulfide nano-particle synthesis as exemplified by a number of highlight examples. Moreover, the article demonstrates how ILs have been used in metal sulfide synthesis and discusses the benefits of using ILs over more traditional approaches. Finally, the article demonstrates some technological challenges and how ILs could be used to further advance the production and specific property engineering of metal sulfide nanomaterials, again based on a number of selected examples. KW - Ionic liquids KW - ionic liquid crystals KW - ionic liquid precursors KW - metal KW - sulfides KW - catalysis KW - electrochemistry KW - energy materials KW - LED KW - solar KW - cells Y1 - 2021 U6 - https://doi.org/10.1002/open.202000357 SN - 2191-1363 VL - 10 IS - 2 SP - 272 EP - 295 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Debatin, Franziska A1 - Behrens, Karsten A1 - Weber, Jens A1 - Baburin, Igor A. A1 - Thomas, Arne A1 - Schmidt, Johannes A1 - Senkovska, Irena A1 - Kaskel, Stefan A1 - Kelling, Alexandra A1 - Hedin, Niklas A1 - Bacsik, Zoltan A1 - Leoni, Stefano A1 - Seifert, Gotthard A1 - Jäger, Christian A1 - Günter, Christina A1 - Schilde, Uwe A1 - Friedrich, Alwin A1 - Holdt, Hans-Jürgen T1 - An isoreticular family of microporous metal-organic frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate Syntheses, structures and properties JF - Chemistry - a European journal N2 - We report on a new series of isoreticular frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate (IFP-14, IFP=imidazolate framework Potsdam) that form one-dimensional, microporous hexagonal channels. Varying R in the 2-substitued linker (R=Me (IFP-1), Cl (IFP-2), Br (IFP-3), Et (IFP-4)) allowed the channel diameter (4.01.7 angstrom), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP-2, IFP-3 and IFP-4 are isostructural to previously reported IFP-1. The structures of IFP-2 and IFP-3 were solved by X-ray crystallographic analyses. The structure of IFP-4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and 1H MAS and 13C CP-MAS NMR spectroscopy. All IFPs showed high thermal stability (345400?degrees C); IFP-1 and IFP-4 were stable in boiling water for 7 d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO2 was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH4 (at 298 K), CO2 (at 298 K) and H2 (at 77 K) at high pressure were also investigated. In situ IR spectroscopy showed that CO2 is physisorbed on IFP-14 under dry conditions and that both CO2 and H2O are physisorbed on IFP-1 under moist conditions. KW - adsorption KW - metal- organic frameworks KW - microporous materials KW - N KW - O ligands KW - zinc Y1 - 2012 U6 - https://doi.org/10.1002/chem.201200889 SN - 0947-6539 VL - 18 IS - 37 SP - 11630 EP - 11640 PB - Wiley-VCH CY - Weinheim ER - TY - BOOK A1 - Rana, Kaushik A1 - Mohapatra, Durga Prasad A1 - Sidorova, Julia A1 - Lundberg, Lars A1 - Sköld, Lars A1 - Lopes Grim, Luís Fernando A1 - Sampaio Gradvohl, André Leon A1 - Cremerius, Jonas A1 - Siegert, Simon A1 - Weltzien, Anton von A1 - Baldi, Annika A1 - Klessascheck, Finn A1 - Kalancha, Svitlana A1 - Lichtenstein, Tom A1 - Shaabani, Nuhad A1 - Meinel, Christoph A1 - Friedrich, Tobias A1 - Lenzner, Pascal A1 - Schumann, David A1 - Wiese, Ingmar A1 - Sarna, Nicole A1 - Wiese, Lena A1 - Tashkandi, Araek Sami A1 - van der Walt, Estée A1 - Eloff, Jan H. P. A1 - Schmidt, Christopher A1 - Hügle, Johannes A1 - Horschig, Siegfried A1 - Uflacker, Matthias A1 - Najafi, Pejman A1 - Sapegin, Andrey A1 - Cheng, Feng A1 - Stojanovic, Dragan A1 - Stojnev Ilić, Aleksandra A1 - Djordjevic, Igor A1 - Stojanovic, Natalija A1 - Predic, Bratislav A1 - González-Jiménez, Mario A1 - de Lara, Juan A1 - Mischkewitz, Sven A1 - Kainz, Bernhard A1 - van Hoorn, André A1 - Ferme, Vincenzo A1 - Schulz, Henning A1 - Knigge, Marlene A1 - Hecht, Sonja A1 - Prifti, Loina A1 - Krcmar, Helmut A1 - Fabian, Benjamin A1 - Ermakova, Tatiana A1 - Kelkel, Stefan A1 - Baumann, Annika A1 - Morgenstern, Laura A1 - Plauth, Max A1 - Eberhard, Felix A1 - Wolff, Felix A1 - Polze, Andreas A1 - Cech, Tim A1 - Danz, Noel A1 - Noack, Nele Sina A1 - Pirl, Lukas A1 - Beilharz, Jossekin Jakob A1 - De Oliveira, Roberto C. L. A1 - Soares, Fábio Mendes A1 - Juiz, Carlos A1 - Bermejo, Belen A1 - Mühle, Alexander A1 - Grüner, Andreas A1 - Saxena, Vageesh A1 - Gayvoronskaya, Tatiana A1 - Weyand, Christopher A1 - Krause, Mirko A1 - Frank, Markus A1 - Bischoff, Sebastian A1 - Behrens, Freya A1 - Rückin, Julius A1 - Ziegler, Adrian A1 - Vogel, Thomas A1 - Tran, Chinh A1 - Moser, Irene A1 - Grunske, Lars A1 - Szárnyas, Gábor A1 - Marton, József A1 - Maginecz, János A1 - Varró, Dániel A1 - Antal, János Benjamin ED - Meinel, Christoph ED - Polze, Andreas ED - Beins, Karsten ED - Strotmann, Rolf ED - Seibold, Ulrich ED - Rödszus, Kurt ED - Müller, Jürgen T1 - HPI Future SOC Lab – Proceedings 2018 N2 - The “HPI Future SOC Lab” is a cooperation of the Hasso Plattner Institute (HPI) and industry partners. Its mission is to enable and promote exchange and interaction between the research community and the industry partners. The HPI Future SOC Lab provides researchers with free of charge access to a complete infrastructure of state of the art hard and software. This infrastructure includes components, which might be too expensive for an ordinary research environment, such as servers with up to 64 cores and 2 TB main memory. The offerings address researchers particularly from but not limited to the areas of computer science and business information systems. Main areas of research include cloud computing, parallelization, and In-Memory technologies. This technical report presents results of research projects executed in 2018. Selected projects have presented their results on April 17th and November 14th 2017 at the Future SOC Lab Day events. N2 - Das Future SOC Lab am HPI ist eine Kooperation des Hasso-Plattner-Instituts mit verschiedenen Industriepartnern. Seine Aufgabe ist die Ermöglichung und Förderung des Austausches zwischen Forschungsgemeinschaft und Industrie. Am Lab wird interessierten Wissenschaftler:innen eine Infrastruktur von neuester Hard- und Software kostenfrei für Forschungszwecke zur Verfügung gestellt. Dazu zählen Systeme, die im normalen Hochschulbereich in der Regel nicht zu finanzieren wären, bspw. Server mit bis zu 64 Cores und 2 TB Hauptspeicher. Diese Angebote richten sich insbesondere an Wissenschaftler:innen in den Gebieten Informatik und Wirtschaftsinformatik. Einige der Schwerpunkte sind Cloud Computing, Parallelisierung und In-Memory Technologien. In diesem Technischen Bericht werden die Ergebnisse der Forschungsprojekte des Jahres 2018 vorgestellt. Ausgewählte Projekte stellten ihre Ergebnisse am 17. April und 14. November 2018 im Rahmen des Future SOC Lab Tags vor. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 151 KW - Future SOC Lab KW - research projects KW - multicore architectures KW - in-memory technology KW - cloud computing KW - machine learning KW - artifical intelligence KW - Future SOC Lab KW - Forschungsprojekte KW - Multicore Architekturen KW - In-Memory Technologie KW - Cloud Computing KW - maschinelles Lernen KW - künstliche Intelligenz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-563712 SN - 978-3-86956-547-7 SN - 1613-5652 SN - 2191-1665 IS - 151 PB - Universitätsverlag Potsdam CY - Potsdam ER -