TY - JOUR A1 - Schulz, Burkhard T1 - New aspects of the solid-state structures and electrochemical properties of aromatic Poly(1,3,4- Oxadiazole)s Y1 - 1994 ER - TY - JOUR A1 - Schulz, Burkhard A1 - Dietzel, Birgit A1 - Orgzall, Ingo A1 - Diez, Isabel A1 - Xu, Chenggang T1 - Aspects of morphology control during the oxidative synthesis of electrically conducting polymers N2 - The formation of micro- and nanostructures during the oxidative polymerization of polypyrrole and polyaniline is investigated using different sulfonic acid dopants. Rod- or tube-like structures are found in polypyrrole as well as in polyaniline without addition of further compounds to the initial reaction mixture of monomer, dopant and oxidant. In these cases, always a crystalline precursor complex composed of a dopand molecule and the pure monomer (aniline) or a trimeric moiety (pyrrole) serves as in-situ template. In most cases the surface of the growing polymer is covered by secondary structures with much smaller sizes so that a hierarchical order of structures at different length scales results. Corresponding model considerations for the polymerization process are outlined. Additionally, unusual structures like platelets, frames, rings, or ribbons are observed in the polypyrrole synthesis in the presence of fluorosurfactants. Y1 - 2009 UR - http://hip.sagepub.com/ U6 - https://doi.org/10.1177/0954008309339933 SN - 0954-0083 ER - TY - JOUR A1 - Sarac, A. Sezai A1 - Gencturk, Asli A1 - Gilsing, Hans-Detlev A1 - Schulz, Burkhard A1 - Turhan, C. Metehan T1 - Effect of electrolyte on the electropolymerization of 2,2-dibutyl-3,4-propylenedioxythiophene on carbon fiber microelectrodes N2 - Electrocoating of 2,2 dibutylpropylene dioxythiophene on carbon fiber microelectrodes (CFMEs) in different electrolytes in acetonitrile was performed, and surface morphology and electrochemical impedance spectroscopic investigation has been carried out. Impedance spectra showed the typical form of Z(IM) versus Z(RE) for transmission- line at frequencies 10 Hz, with transition to almost pure capacitive behaviour down to 10 mHz (the lower limit of frequency scan). Y1 - 2009 UR - http://aspbs.com/jnn/ U6 - https://doi.org/10.1166/Jnn.2009.027 SN - 1533-4880 ER - TY - JOUR A1 - Reiche, Jürgen A1 - Schulz, Burkhard A1 - Knochenhauer, Gerald A1 - Dietzel, Birgit A1 - Freydank, Anke-Christine A1 - Zetzsche, Thomas A1 - Brehmer, Ludwig T1 - Supramolecular structures formed from heterocyclic aromatic molecules N2 - This paper describes the formation and structure investigation of Langmuir monolayers and Langmuir-Blodgett multilayers formed from amphiphilic derivatives of 2,5-diphenyl-1,3,4-oxadiazole. The 2,5-diphenyl-1,3,4-oxadiazole group as a functional unit with interesting physical and chemical properties is maintained, while the head group, the length of the alkyl chain and the structure of the coupling unit between aromatic and aliphatic part of these linear short-chain amphiphiles is systematically varied in order to explore the influence of this change on the film forming properties and the stability of Langmuir and Langmuir-Blodgett films. Molecular mechanics simulations are shown by these systematic variations to be suitable for the prediction of optimal chemical structures allowing for a stable stratified molecular packing. The combination of a detailed structure investigation of the multilayers based on scanning force microscopy and X-ray data with molecular mechanics simulations yields an insight into the packing of the molecules and the intermolecular interactions. Y1 - 1997 ER - TY - JOUR A1 - Schulz, Burkhard A1 - Brehmer, Ludwig T1 - Preparation and characterization of ordered thin films based on aromatic poly(1,3,4-oxadiazole)s Y1 - 1995 ER - TY - JOUR A1 - Schulz, Burkhard A1 - Janietz, Silvia T1 - Preparation and characterization of thin films containing aromatic poly(1,3,4- oxadiazole)s Y1 - 1995 ER - TY - JOUR A1 - Schulz, Burkhard T1 - Structure and properties of thin polyoxadiazole films Y1 - 1995 ER - TY - JOUR A1 - Schulz, Burkhard A1 - Brehmer, Ludwig A1 - Knochenhauer, Gerald T1 - Supramolecular structures of aromatic 1,3,4-oxadiazole solids Y1 - 1995 ER - TY - JOUR A1 - Orgzall, Ingo A1 - Franco, Olga A1 - Schulz, Burkhard T1 - High pressure structural investigations of 2,5-di(4-pyridyl)-1,3,4-oxadiazole - importance of strain studies for the description of intermolecular interactions N2 - Results of a high pressure x-ray study of 2,5-di(4-pyridyl)-1,3,4-oxadiazole up to 2.5 GPa are presented and discussed. Parameters for the Murnaghan equation of state are derived. The bulk modulus amounts to K-0 = 4.6 +/- 0.3 GPa and its pressure derivative to K-0' = 7.4 +/- 0.6. These values are comparable to values of other diphenyl-1,3,4- oxadiazoles. The anisotropy of the compression is analysed using the strain tensor and discussed based on the anisotropy of the intermolecular interactions Y1 - 2006 UR - http://iopscience.iop.org/0953-8984 U6 - https://doi.org/10.1088/0953-8984/18/23/001 ER - TY - JOUR A1 - Sarauli, David A1 - Xu, Chenggang A1 - Dietzel, Birgit A1 - Schulz, Burkhard A1 - Lisdat, Fred T1 - A multilayered sulfonated polyaniline network with entrapped pyrroloquinoline quinone-dependent glucose dehydrogenase: tunable direct bioelectrocatalysis JF - Journal of materials chemistry : B, Materials for biology and medicine N2 - A feasible approach to construct multilayer films of sulfonated polyanilines - PMSA1 and PABMSA1 containing different ratios of aniline, 2-methoxyaniline-5-sulfonic acid (MAS) and 3-aminobenzoic acid (AB), with the entrapped redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) on Au and ITO electrode surfaces, is described. The formation of layers has been followed and confirmed by electrochemical impedance spectroscopy (EIS), which demonstrates that the multilayer assembly can be achieved in a progressive and uniform manner. The gold and ITO electrodes subsequently modified with PMSA1:PQQ-GDH and PABMSA1 films are studied by cyclic voltammetry (CV) and UV-Vis spectroscopy which show a significant direct bioelectrocatalytical response to the oxidation of the substrate glucose without any additional mediator. This response correlates linearly with the number of deposited layers. Furthermore, the constructed polymer/enzyme multilayer system exhibits a rather good long-term stability, since the catalytic current response is maintained for more than 60% of the initial value even after two weeks of storage. This verifies that a productive interaction of the enzyme embedded in the film of substituted polyaniline can be used as a basis for the construction of bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction. Y1 - 2014 U6 - https://doi.org/10.1039/c4tb00336e SN - 2050-750X SN - 2050-7518 VL - 2 IS - 21 SP - 3196 EP - 3203 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Turhan, Metehan C. A1 - Sarac, A. Sezai A1 - Gencturk, Asli A1 - Gilsing, Hans-Detlev A1 - Faltz, Heike A1 - Schulz, Burkhard T1 - Electrochemical impedance characterization and potential dependence of poly[3,4-(2,2-dibutylpropylenedioxy)thiophene] nanostructures on single carbon fiber microelectrode JF - Synthetic metals : the journal of electronic polymers and electronic molecular materials N2 - The electropolymerization of 3,4-(2,2-dibutylpropylenedioxy)thiophene (ProDOT-Bu-2) onto single carbon fiber microelectrode (SCFME) was conducted in acetonitrile (ACN) containing sodium perchlorate (NaClO4) as electrolyte and investigated by cyclic voltammetry (CV). The nanostructured films of poly[3,4-(2,2-dibutyl-propyleneclioxy)thiophene] (PProDOT-Bu-2) which were depositing showed complete reversible redox behavior in monomer-free electrolyte solution. The capacitive behavior of the films was investigated by electrochemical impedance spectroscopy (EIS) at applied potentials from 0.1 V to 1.3 V. The analysis by equivalent circuit modeling revealed an applied potential around 0.4V to be most suitable for the system PProDOT-Bu-2/SCFME as a double layer supercapacitor component inducing a double layer capacitance C-d, value of 62 mFcm(-2). KW - Nanostructure KW - Electrochemical impedance spectroscopy KW - Conjugated polymeric thin film KW - Carbon fiber Y1 - 2012 U6 - https://doi.org/10.1016/j.synthmet.2012.01.012 SN - 0379-6779 VL - 162 IS - 5-6 SP - 511 EP - 515 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Sarauli, David A1 - Peters, Kristina A1 - Xu, Chenggang A1 - Schulz, Burkhard A1 - Fattakhova-Rohlfing, Dina A1 - Lisdat, Fred T1 - 3D-Electrode architectures for enhanced direct bioelectrocatalysis of pyrroloquinoline quinone-dependent glucose dehydrogenase JF - ACS applied materials & interfaces N2 - We report on the fabrication of a complex electrode architecture for efficient direct bioelectrocatalysis. In the developed procedure, the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase entrapped in a sulfonated polyaniline [poly(2-methoxyaniline-5-sulfonic acid)-co-aniline] was immobilized on macroporous indium tin oxide (macroITO) electrodes. The use of the 3D-conducting scaffold with a large surface area in combination with the conductive polymer enables immobilization of large amounts of enzyme and its efficient communication with the electrode, leading to enhanced direct bioelectrocatalysis. In the presence of glucose, the fabricated bioelectrodes show an exceptionally high direct bioelectrocatalytical response without any additional mediator. The catalytic current is increased more than 200-fold compared to planar ITO electrodes. Together with a high long-term stability (the current response is maintained for >90% of the initial value even after 2 weeks of storage), the transparent 3D macroITO structure with a conductive polymer represents a valuable basis for the construction of highly efficient bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction. KW - 3D electrode structures KW - macroITO KW - conductive polymer KW - PQQ-GDH KW - direct bioelectrocatalysis KW - bioelectrochemistry Y1 - 2014 U6 - https://doi.org/10.1021/am5046026 SN - 1944-8244 VL - 6 IS - 20 SP - 17887 EP - 17893 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schöne, Anne-Christin A1 - Schulz, Burkhard A1 - Richau, Klaus A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Characterization of Langmuir films prepared from copolyesterurethanes based on oligo(omega-pentadecalactone) and oligo(epsilon-caprolactone)segments JF - Macromolecular chemistry and physics N2 - A series of multiblock copolymers (PDLCL) synthesized from oligo(omega-pentadecalactone) diol (OPDL) and oligo(epsilon-caprolactone) diol (OCL), which are linked by 2,2(4), 4-trimethyl-hexamethylene diisocyanate (TMDI), is investigated by the Langmuir monolayer technique at the air-water interface. Brewster angle microscopy (BAM) and spectroscopic ellipsometry are employed to characterize the polymer film morphologies in situ. PDLCL containing >= 40 wt% OCL segments form homogeneous Langmuir monofilms after spreading. The film elasticity modulus decreases with increasing amounts of OPDL segments in the copolymer. In contrast, the OCL-free polyesterurethane OPDL-TMDI cannot be spread to monomolecular films on the water surface properly, and movable slabs are observed by BAM even at low surface pressures. The results of the in situ morphological characterization clearly show that essential information concerning the reliability of Langmuir monolayer degradation (LMD) experiments cannot be obtained from the evaluation of the pi-A isotherms only. Consequently, in situ morphological characterization turns out to be indispensable for characterization of Langmuir layers before LMD experiments. KW - brewster angle microscopy KW - ellipsometry KW - Langmuir layers KW - morphology KW - polyesterurethanes Y1 - 2014 U6 - https://doi.org/10.1002/macp.201400377 SN - 1022-1352 SN - 1521-3935 VL - 215 IS - 24 SP - 2437 EP - 2445 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Jetzschmann, Katharina J. A1 - Jagerszki, Gyula A1 - Dechtrirat, Decha A1 - Yarman, Aysu A1 - Gajovic-Eichelmann, Nenad A1 - Gilsing, Hans-Detlev A1 - Schulz, Burkhard A1 - Gyurcsanyi, Robert E. A1 - Scheller, Frieder W. T1 - Vectorially Imprinted Hybrid Nanofilm for Acetylcholinesterase Recognition JF - Advanced functional materials N2 - Effective recognition of enzymatically active tetrameric acetylcholinesterase (AChE) is accomplished by a hybrid nanofilm composed of a propidium-terminated self-assembled monolayer (Prop-SAM) which binds AChE via its peripheral anionic site (PAS) and an ultrathin electrosynthesized molecularly imprinted polymer (MIP) cover layer of a novel carboxylate-modified derivative of 3,4-propylenedioxythiophene. The rebinding of the AChE to the MIP/Prop-SAM nanofilm covered electrode is detected by measuring in situ the enzymatic activity. The oxidative current of the released thiocholine is dependent on the AChE concentration from approximate to 0.04 x 10(-6) to 0.4 x 10(-6)m. An imprinting factor of 9.9 is obtained for the hybrid MIP, which is among the best values reported for protein imprinting. The dissociation constant characterizing the strength of the MIP-AChE binding is 4.2 x 10(-7)m indicating the dominant role of the PAS-Prop-SAM interaction, while the benefit of the MIP nanofilm covering the Prop-SAM layer is the effective suppression of the cross-reactivity toward competing proteins as compared with the Prop-SAM. The threefold selectivity gain provided by i) the shape-specific MIP filter, ii) the propidium-SAM, iii) signal generation only by the AChE bound to the nanofilm shows promise for assessing AChE activity levels in cerebrospinal fluid. KW - acetylcholinesterase KW - biomimetic sensors KW - molecularly imprinted electropolymers KW - peripheral anionic site KW - propidium Y1 - 2015 U6 - https://doi.org/10.1002/adfm.201501900 SN - 1616-301X SN - 1616-3028 VL - 25 IS - 32 SP - 5178 EP - 5183 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Guler, Fatma G. A1 - Gilsing, Hans-Detlev A1 - Schulz, Burkhard A1 - Sarac, A. Sezai T1 - Impedance and morphology of hydroxy- and chloro-functionalized poly(3,4-propylenedioxythiophene) nanostructures JF - Journal of nanoscience and nanotechnolog N2 - The new 3,4-propylenedioxythiophenes (ProDOT) bearing hydroxy- or chloro-functionalized side chains of varying length and polarity were synthesized and electropolymerized on single carbon fiber microelectrode (SCFME) using cyclo-voltammetry. Electrochemical impedance spectroscopy (EIS) revealed highest capacitance values for the hydroxy-functionalized Poly 5 carrying a side chain of medium length. The EIS data were fitted with an equivalent electrical circuit giving a good correlation. AFM analysis of the topography showed higher roughness values for Poly 5 than for the two other polymers bearing longer side chains. Due to their reactive end groups the polymers should be useful for post-polymerization functionalization of the electrode surface. KW - 3,4-Propylenedioxythiophene KW - Electroactive Conjugated Polymer KW - EIS KW - AFM Y1 - 2012 U6 - https://doi.org/10.1166/jnn.2012.6594 SN - 1533-4880 VL - 12 IS - 10 SP - 7869 EP - 7878 PB - American Scientific Publ. CY - Valencia ER - TY - JOUR A1 - Hoffmann, Katrin A1 - Dietzel, Birgit A1 - Schulz, Burkhard A1 - Reck, Guenter A1 - Hoffmann, Angelika A1 - Orgzall, Ingo A1 - Resch-Genger, Ute A1 - Emmerling, Franziska T1 - Combined structural and fluorescence studies of methyl-substituted 2,5-diphenyl-1,3,4-oxadiazoles - Relation between electronic properties and packing motifs JF - Journal of molecular structure N2 - Prerequisite for the rational design of functional organic materials with tailor-made electronic properties is the knowledge of the structure-property relationship for the specific class of molecules under consideration. This encouraged us to systematically study the influence of the molecular structure and substitution pattern of aromatically substituted 1,3,4-oxadiazoles on the electronic properties and packing motifs of these molecules and on the interplay of these factors. For this purpose, seven diphenyl-oxadiazoles equipped with methyl substituents in the ortho- and meta-position(s) were synthesized and characterized. Absorption and fluorescence spectra in solution served here as tools to monitor substitution-induced changes in the electronic properties of the individual molecules whereas X-ray and optical measurements in the solid state provided information on the interplay of electronic and packing effects. In solution, the spectral position of the absorption maximum, the size of Stokes shift, and the fluorescence quantum yield are considerably affected by ortho-substitution in three or four ortho-positions. This results in blue shifted absorption bands, increased Stokes shifts, and reduced fluorescence quantum yields whereas the spectral position and vibrational structure of the emission bands remain more or less unaffected. In the crystalline state, however, the spectral position and shape of the emission bands display a strong dependence on the molecular structure and/or packing motifs that seem to control the amount of dye-dye-interactions. These observations reveal the limited value of commonly reported absorption and fluorescence measurements in solution for a straightforward comparison of spectroscopic results with single X-ray crystallography. This underlines the importance of solid state spectroscopic studies for a better understanding of the interplay of electronic effects and molecular order. KW - Diphenyl-oxadiazoles KW - X-ray structure KW - Packing motif KW - Optical properties KW - Fluorescence quantum yield Y1 - 2011 U6 - https://doi.org/10.1016/j.molstruc.2010.11.071 SN - 0022-2860 VL - 988 IS - 1-3 SP - 35 EP - 46 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Emmerling, Franziska A1 - Orgzall, Ingo A1 - Dietzel, Birgit A1 - Schulz, Burkhard A1 - Larrucea, Julen T1 - Ordering the amorphous - Structures in PBD LED materials JF - Journal of molecular structure N2 - The class of 2,5 disubstituted-1,3,4-oxadiazoles containing a biphenyl unit on one side is intensively used as electron transport materials to enhance the performance of organic light emitting diodes (OLEDs). In contrast to the ongoing research on these materials insights in their structure-property relationships are still incomplete. To overcome the structural tentativeness and ambiguities the crystal structures of 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole, that of the related compound 2-(4-biphenylyl)-5-phenyl-1,3,4-oxadiazole and of 2-(4-biphenylyl)-5-(2,6-dimethylphenyl)-1,3,4-oxadiazole are determined. A comparison with the results of GAUSSIAN03 calculations and similar compounds in the Cambridge Structural Database leads to a profound characterization. KW - OLED KW - PBD KW - Diphenyl-1,3,4-oxadiazole KW - Crystallization Y1 - 2012 U6 - https://doi.org/10.1016/j.molstruc.2012.04.040 SN - 0022-2860 VL - 1030 IS - 23 SP - 209 EP - 215 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Schöne, Anne-Christin A1 - Richau, Klaus A1 - Kratz, Karl A1 - Schulz, Burkhard A1 - Lendlein, Andreas T1 - Influence of Diurethane Linkers on the Langmuir Layer Behavior of Oligo[(rac-lactide)-co-glycolide]-based Polyesterurethanes JF - Macromolecular rapid communications N2 - Three oligo[(rac-lactide)-co-glycolide] based polyesterurethanes (OLGA-PUs) containing different diurethane linkers are investigated by the Langmuir monolayer technique and compared to poly[(rac-lactide)-co-glycolide] (PLGA) to elucidate the influence of the diurethane junction units on hydrophilicity and packing motifs of these polymers at the air-water interface. The presence of diurethane linkers does not manifest itself in the Langmuir layer behavior both in compression and expansion experiments when monomolecular films of OLGA-PUs are spread on the water surface. However, the linker retard the evolution of morphological structures at intermediate compression level under isobaric conditions (with a surface pressure greater than 11 mN m(-1)) compared to the PLGA, independent on the chemical structure of the diurethane moiety. The layer thicknesses of both OLGA-PU and PLGA films decrease in the high compression state with decreasing surface pressure, as deduced from ellipsometric data. All films must be described with the effective medium approximation as water swollen layers. KW - Brewster angle microscopy KW - Langmuir monolayer KW - poly[(rac-lactide)-co-glycolide] KW - polyesterurethanes KW - spectroscopic ellipsometry Y1 - 2015 U6 - https://doi.org/10.1002/marc.201500316 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 21 SP - 1910 EP - 1915 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Sarauli, David A1 - Xu, Chenggang A1 - Dietzel, Birgit A1 - Stiba, Konstanze A1 - Leimkühler, Silke A1 - Schulz, Burkhard A1 - Lisdat, Fred T1 - Thin films of substituted polyanilines interactions with biomolecular systems JF - Soft matter N2 - We use substituted polyanilines for the construction of new polymer electrodes for interaction studies with the redox protein cytochrome c (cyt c) and the enzyme sulfite oxidase (SO). For these purposes four different polyaniline copolymers are chemically synthesized. Three of them are copolymers, containing 2-methoxyaniline-5-sulfonic acid with variable ratios of aniline; the fourth copolymer consists of 3-amino-benzoic acid and aniline. The results show that all polymers are suitable for being immobilized as thin stable films on gold wire and indium tin oxide (ITO) electrode surfaces from DMSO solution. This can be demonstrated by cyclic voltammetry and UV-Vis spectroscopy measurements. Moreover, cyt c can be electrochemically detected not only in solution, but also immobilized on top of the polymer films. Furthermore, the appearance of a significant catalytic current has been demonstrated for the sulfonated polyanilines, when the polymer-coated protein electrode is being measured upon addition of sulfite oxidase, confirming the establishment of a bioanalytical signal chain. Best results have been obtained for the polymer with highest sulfonation grade. The redox switching of the polymer by the enzymatic reaction can also be analyzed by following the spectral properties of the polymer electrode. Y1 - 2012 U6 - https://doi.org/10.1039/c2sm07261k SN - 1744-683X VL - 8 IS - 14 SP - 3848 EP - 3855 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Schöne, Anne-Christin A1 - Schulz, Burkhard A1 - Lendlein, Andreas T1 - Stimuli Responsive and Multifunctional Polymers: Progress in Materials and Applications JF - Macromolecular rapid communications Y1 - 2016 U6 - https://doi.org/10.1002/marc.201600650 SN - 1022-1336 SN - 1521-3927 VL - 37 SP - 1856 EP - 1859 PB - Wiley-VCH CY - Weinheim ER -