TY - THES A1 - Schleicher, Anja Maria T1 - The significance of clay minerals in active fault zones N2 - Die vorliegende Habilitationsschrift umfasst Forschungsergebnisse aus Studien, die sich mit Fluid-Gesteins-Wechselwirkungen und Deformationsprozessen in aktiven Störungszonen befassen, wobei der Einfluss der Tonminerale auf das geochemische und hydromechanische Verhalten dieser Störungen im Vordergrund steht. Kernproben (core) und Bohrklein (cuttings) aus vier verschiedenen Bohrprojekten an der San Andreas Störung (USA), der Nankai Trough Subduktionszone und der Japan Trench Subduktionszone (Japan), sowie der Alpine Störung in Neuseeland wurden untersucht. Die von ICDP (International Continental Scientific Drilling Program) und IODP (International Ocean Discovery Program) unterstützten Projekte verfolgen alle das Ziel, das Verhalten von Erdbeben besser zu verstehen. In Kapitel 1 werden in einer kurzen Einleitung die allgemeinen thematischen Grundlagen und Ziele der Arbeit beschrieben. Kapitel 2 umfasst den Stand der Forschung, eine kurze Beschreibung der einzelnen Bohrprojekte und Standorte, sowie eine Zusammenfassung der wichtigsten Messmethoden. Kapitel 3 beinhaltet insgesamt zehn wissenschaftliche Arbeiten, die alle in einem methodisch-thematischen Zusammenhang stehen. Die Manuskripte wurden in den Jahren 2006-2015 veröffentlicht, wobei weitere Arbeiten aus diesem Themenbereich im Literaturverzeichnis vermerkt sind. Sie gehen auf unterschiedliche Fragestellungen um die Bildung und das Verhalten von Tonmineralen in aktiven Störungszonen ein. Insgesamt sechs Publikationen beinhalten Daten und Forschungsergebnisse, die im Rahmen des SAFOD Projektes, USA (San Andreas Fault Observatory at Depth) erstellt wurden. Hier wurde vor allem auf die Fluid-Gesteins-Wechselwirkungsprozesse im Störungsgestein und die daraus resultierende Bildung von Tonmineralen eingegangen. Drei weitere Arbeiten wurden im Rahmen des NanTroSEIZE Projektes, Japan (Nankai Trough Seismogenic Zone Experiment) und des JFAST Projektes, Japan (Japan Trench Fast Drilling Project) erstellt. Hier steht vor allem das Verhalten von quellfähigen Tonmineralen auf sich ändernde Umgebungsbedingungen (z.B. Temperatur und Feuchtigkeit) im Mittelpunkt. Die zehnte hier vorgestellte Veröffentlichung betrifft Analysen rund um das DFDP Projekt (Deep Fault Drilling Project) in Neuseeland, wobei hier die Deformation von Tonmineralen und das hydro-mechanische Verhalten der Störungszone im Vordergrund stehen. In neun Veröffentlichungen war ich als Erstautor für die Vorbereitung des Projektes, das Erstellen der Daten und die Fertigstellung der Manuskripte zuständig. In einer Publikation war ich als Mitautorin für die elektronenmikroskopischen Analysen und deren Interpretation verantwortlich. Die wichtigsten Ergebnisse der in Kapitel 3 vorgelegten Arbeiten werden in Kapitel 4 unter Berücksichtigung neuer Publikationen diskutiert. Nach der Beschreibung der Thesen in Kapitel 5 werden in Kapitel 6 „Outlook“ die Highlights zukünftiger Forschungspläne am GFZ näher beschrieben. Die Habilitationsschrift endet mit dem Anhang, in welchem unter anderem das Laborequipment genauer beschrieben wird, sowie die Publikationen, Konferenzbeiträge und Lehrbeiträge aufgelistet sind. N2 - The habilitation thesis presented here includes results from several studies dealing with fluid-rock interactions and rock deformation processes in active fault zones. The focus in all of these studies is on the influence of clay minerals on the geochemical and the hydro-mechanical behavior of the fault rocks. The research was conducted on rock cores and cuttings from four scientific drilling projects at the San Andreas Fault (USA), the Nankai Trough subduction zone and the Japan Trench subduction zone (Japan), as well as the Alpine Fault in New Zealand. These ICDP (International Continental Scientific Drilling Program) and IODP (International Ocean Discovery Program) funded projects were all conducted with the aim to monitor and better understand earthquakes. Chapter 1 contains a short introduction to the topic with basic principles and objectives regarding the research approach. Chapter 2 describes the state of the art in clay mineral and fault zone science, gives a short description of the individual drilling projects and their locations on which the research was based, and summarizes the most important analytical methods used. Chapter 3 comprises ten peer-reviewed publications that are connected thematically and methodologically. The papers were published in the years 2006-2015, and additional related publications including myself as co-author are given in the literature list. The ten publications address different questions concerning the formation of clay minerals and processes of fluid-rock interaction in active fault zones. Six papers contain results from the SAFOD drilling project, USA (San Andreas Fault Observatory at Depth), with the main focus on fluid-rock interaction processes in fault rocks and the formation and location of clay minerals. Three publications report on research from the NanTroSEIZE drilling project (Nankai Trough Seismogenic Zone Experiment) and the JFAST drilling project (Japan Trench Fast Drilling Project). Both projects are situated in Japan. Here, the swelling behavior of smectite clay minerals in relation to changing environmental conditions (e.g. temperature and/or humidity) was investigated. The last publication included here concerns a study from the DFDP project (Deep Fault Drilling Project) in New Zealand, where I investigated the deformation of clay minerals on the context of the hydro-mechanical behavior of the fault zone rocks. I was first author in nine of the publications and in charge of the project preparation, measurements and data analyses, and the completion of the manuscript. As co-author on the other publication I was responsible for electronmicroscopy analyses (SEM and TEM) and their interpretation. The key results from the publications in Chapter 3 are discussed in Chapter 4 with additional considerations from more recent papers. Following the major theses in Chapter 5, Chapter 6 highlights a future research project in clay mineralogy research at the GFZ. An appendix includes more detailed descriptions of the laboratory equipment and lists of all publications, conference contributions and teaching courses and modules. KW - fault zone KW - Störungszone KW - clay mineral KW - fluid-rock interaction KW - Tonminerale KW - Fluid-Gesteins Wechselwirkung Y1 - 2019 ER - TY - JOUR A1 - Schuck, Bernhard A1 - Janssen, C. A1 - Schleicher, Anja Maria A1 - Toy, Virginia G. A1 - Dresen, Georg T1 - Microstructures imply cataclasis and authigenic mineral formation JF - Journal of structural geology N2 - The Alpine Fault is capable of generating large (MW > 8) earthquakes and is the main geohazard on South Island, NZ, and late in its 250–291-year seismic cycle. To minimize its hazard potential, it is indispensable to identify and understand the processes influencing the geomechanical behavior and strength-evolution of the fault. High-resolution microstructural, mineralogical and geochemical analyses of the Alpine Fault's core demonstrate wall rock fragmentation, assisted by mineral dissolution, and cementation resulting in the formation of a fine-grained principal slip zone (PSZ). A complex network of anastomosing and mutually cross-cutting calcite veins implies that faulting occurred during episodes of dilation, slip and sealing. Fluid-assisted dilatancy leads to a significant volume increase accommodated by vein formation in the fault core. Undeformed euhedral chlorite crystals and calcite veins that have cut footwall gravels demonstrate that these processes occurred very close to the Earth's surface. Microstructural evidence indicates that cataclastic processes dominate the deformation and we suggest that powder lubrication and grain rolling, particularly influenced by abundant nanoparticles, play a key role in the fault core's velocity-weakening behavior rather than frictional sliding. This is further supported by the absence of smectite, which is reasonable given recently measured geothermal gradients of more than 120 °C km−1 and the impermeable nature of the PSZ, which both limit the growth of this phase and restrict its stability to shallow depths. Our observations demonstrate that high-temperature fluids can influence authigenic mineral formation and thus control the fault's geomechanical behavior and the cyclic evolution of its strength. KW - Alpine Fault KW - Fluid-rock interaction KW - Fault-rock microstructures KW - Fault healing KW - Authigenic mineral formation KW - Brittle deformation Y1 - 2018 U6 - https://doi.org/10.1016/j.jsg.2018.03.001 SN - 0191-8141 VL - 110 SP - 172 EP - 186 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Milewski, Robert A1 - Chabrillat, Sabine A1 - Brell, Maximillian A1 - Schleicher, Anja Maria A1 - Guanter, Luis T1 - Assessment of the 1.75μm absorption feature for gypsum estimation using laboratory, air- and spaceborne hyperspectral sensors JF - International Journal of Applied Earth Observation and Geoinformation N2 - High spectral resolution (hyperspectral) remote sensing has already demonstrated its capabilities for soil constituent mapping based on absorption feature parameters. This paper tests different parametrizations of the 1.75 μm gypsum feature for the determination of gypsum abundances, from the laboratory to remote sensing applications of recent as well as upcoming hyperspectral sensors. In particular, this study focuses on remote sensing imagery over the large body of the Omongwa pan located in the Namibian Kalahari. Four common absorption feature parameters are compared: band ratio through the introduction of the Normalized Differenced Gypsum Index (NDGI), the shape-based parameters Slope, and Half-Area, and the Continuum Removed Absorption Depth (CRAD). On laboratory soil samples from the pan, CRAD and NDGI approaches perform best to determine gypsum content tested in cross validated regression models with XRD mineralogical data (R² = 0.84 for NDGI and R² = 0.86 for CRAD). Subsequently the laboratory prediction functions are transferred to remote sensing imagery of spaceborne Hyperion, airborne HySpex and simulated spaceborne EnMAP sensor. Variable results were obtained depending on sensor characteristics, data quality, preprocessing and spectral parameters. Overall, the CRAD parameter in this wavelength region proved not to be robust for remote sensing applications, and the simple band ratio based parameter, the NDGI, proved robust and is recommended for future use for the determination of gypsum content in bare soils based on remote sensing hyperspectral imagery. KW - Hyperspectral KW - Gypsum quantification KW - Salt pan KW - Absorption feature parameters KW - Namibia Y1 - 2017 U6 - https://doi.org/10.1016/j.jag.2018.12.012 SN - 0303-2434 VL - 77 SP - 69 EP - 83 PB - Elsevier Science CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Schuster, Valerian A1 - Rybacki, Erik A1 - Bonnelye, Audrey A1 - Herrmann, Johannes A1 - Schleicher, Anja Maria A1 - Dresen, Georg T1 - Experimental deformation of opalinus clay at elevated temperature and pressure conditions BT - Mechanical properties and the influence of rock fabric JF - Rock mechanics and rock engineering N2 - The mechanical behavior of the sandy facies of Opalinus Clay (OPA) was investigated in 42 triaxial tests performed on dry samples at unconsolidated, undrained conditions at confining pressures (p(c)) of 50-100 MPa, temperatures (T) between 25 and 200 degrees C and strain rates (epsilon) (over dot ) of 1 x-10(-3)-5 x-10(-6) -s(-1). Using a Paterson-type deformation apparatus, samples oriented at 0 degrees, 45 degrees and 90 degrees to bedding were deformed up to about 15% axial strain. Additionally, the influence of water content, drainage condition and pre-consolidation was investigated at fixed p(c)-T conditions, using dry and re-saturated samples. Deformed samples display brittle to semi-brittle deformation behavior, characterized by cataclastic flow in quartz-rich sandy layers and granular flow in phyllosilicate-rich layers. Samples loaded parallel to bedding are less compliant compared to the other loading directions. With the exception of samples deformed 45 degrees and 90 degrees to bedding at p(c) = 100 MPa, strain is localized in discrete shear zones. Compressive strength (sigma(max)) increases with increasing pc, resulting in an internal friction coefficient of approximate to 0.31 for samples deformed at 45 degrees and 90 degrees to bedding, and approximate to 0.44 for samples deformed parallel to bedding. In contrast, pre-consolidation, drainage condition, T and epsilon(over dot )do not significantly affect deformation behavior of dried samples. However, sigma(max) and Young's modulus (E) decrease substantially with increasing water saturation. Compared to the clay-rich shaly facies of OPA, sandy facies specimens display higher strength sigma(max) and Young's modulus E at similar deformation conditions. Strength and Young's modulus of samples deformed 90 degrees and 45 degrees to bedding are close to the iso-stress Reuss bound, suggesting a strong influence of weak clay-rich layers on the deformation behavior. KW - Clay rock KW - Sandy facies of Opalinus Clay KW - Triaxial deformation experiments KW - Microstructural deformation mechanisms KW - Pressure-temperature and strain rate-dependent mechanical behaviour KW - Anisotropy Y1 - 2021 U6 - https://doi.org/10.1007/s00603-021-02474-3 SN - 0723-2632 SN - 1434-453X VL - 54 SP - 4009 EP - 4039 PB - Springer CY - Wien ER - TY - JOUR A1 - Toy, Virginia Gail A1 - Sutherland, Rupert A1 - Townend, John A1 - Allen, Michael J. A1 - Becroft, Leeza A1 - Boles, Austin A1 - Boulton, Carolyn A1 - Carpenter, Brett A1 - Cooper, Alan A1 - Cox, Simon C. A1 - Daube, Christopher A1 - Faulkner, D. R. A1 - Halfpenny, Angela A1 - Kato, Naoki A1 - Keys, Stephen A1 - Kirilova, Martina A1 - Kometani, Yusuke A1 - Little, Timothy A1 - Mariani, Elisabetta A1 - Melosh, Benjamin A1 - Menzies, Catriona D. A1 - Morales, Luiz A1 - Morgan, Chance A1 - Mori, Hiroshi A1 - Niemeijer, Andre A1 - Norris, Richard A1 - Prior, David A1 - Sauer, Katrina A1 - Schleicher, Anja Maria A1 - Shigematsu, Norio A1 - Teagle, Damon A. H. A1 - Tobin, Harold A1 - Valdez, Robert A1 - Williams, Jack A1 - Yeo, Samantha A1 - Baratin, Laura-May A1 - Barth, Nicolas A1 - Benson, Adrian A1 - Boese, Carolin A1 - Célérier, Bernard A1 - Chamberlain, Calum J. A1 - Conze, Ronald A1 - Coussens, Jamie A1 - Craw, Lisa A1 - Doan, Mai-Linh A1 - Eccles, Jennifer A1 - Grieve, Jason A1 - Grochowski, Julia A1 - Gulley, Anton A1 - Howarth, Jamie A1 - Jacobs, Katrina A1 - Janku-Capova, Lucie A1 - Jeppson, Tamara A1 - Langridge, Robert A1 - Mallyon, Deirdre A1 - Marx, Ray A1 - Massiot, Cécile A1 - Mathewson, Loren A1 - Moore, Josephine A1 - Nishikawa, Osamu A1 - Pooley, Brent A1 - Pyne, Alex A1 - Savage, Martha K. A1 - Schmitt, Doug A1 - Taylor-Offord, Sam A1 - Upton, Phaedra A1 - Weaver, Konrad C. A1 - Wiersberg, Thomas A1 - Zimmer, Martin T1 - Bedrock geology of DFDP-2B, central Alpine Fault, New Zealand JF - New Zealand journal of geology and geophysics : an international journal of the geoscience of New Zealand, the Pacific Rim, and Antarctica ; NZJG N2 - During the second phase of the Alpine Fault, Deep Fault Drilling Project (DFDP) in the Whataroa River, South Westland, New Zealand, bedrock was encountered in the DFDP-2B borehole from 238.5–893.2 m Measured Depth (MD). Continuous sampling and meso- to microscale characterisation of whole rock cuttings established that, in sequence, the borehole sampled amphibolite facies, Torlesse Composite Terrane-derived schists, protomylonites and mylonites, terminating 200–400 m above an Alpine Fault Principal Slip Zone (PSZ) with a maximum dip of 62°. The most diagnostic structural features of increasing PSZ proximity were the occurrence of shear bands and reduction in mean quartz grain sizes. A change in composition to greater mica:quartz + feldspar, most markedly below c. 700 m MD, is inferred to result from either heterogeneous sampling or a change in lithology related to alteration. Major oxide variations suggest the fault-proximal Alpine Fault alteration zone, as previously defined in DFDP-1 core, was not sampled. KW - Alpine Fault KW - New Zealand KW - scientific drilling KW - mylonite KW - cataclasite Y1 - 2017 U6 - https://doi.org/10.1080/00288306.2017.1375533 SN - 0028-8306 SN - 1175-8791 VL - 60 IS - 4 SP - 497 EP - 518 PB - Taylor & Francis CY - Abingdon ER - TY - GEN A1 - Schuck, Bernhard A1 - Schleicher, Anja Maria A1 - Janssen, Christoph A1 - Toy, Virginia G. A1 - Dresen, Georg T1 - Fault zone architecture of a large plate-bounding strike-slip fault BT - A case study from the Alpine Fault, New Zealand T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - New Zealand's Alpine Fault is a large, platebounding strike-slip fault, which ruptures in large (M-w > 8) earthquakes. We conducted field and laboratory analyses of fault rocks to assess its fault zone architecture. Results reveal that the Alpine Fault Zone has a complex geometry, comprising an anastomosing network of multiple slip planes that have accommodated different amounts of displacement. This contrasts with the previous perception of the Alpine Fault Zone, which assumes a single principal slip zone accommodated all displacement. This interpretation is supported by results of drilling projects and geophysical investigations. Furthermore, observations presented here show that the young, largely unconsolidated sediments that constitute the footwall at shallow depths have a significant influence on fault gouge rheological properties and structure. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1428 KW - san andreas fault KW - thickness-displacement relationships KW - central south island KW - Ion-Beam (FIB) KW - internal structure KW - hanging wall KW - Fluid Flow KW - frictional properties KW - weakening mechanisms KW - strain localization Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-512441 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Schuck, Bernhard A1 - Schleicher, Anja Maria A1 - Janssen, Christoph A1 - Toy, Virginia G. A1 - Dresen, Georg T1 - Fault zone architecture of a large plate-bounding strike-slip fault BT - A case study from the Alpine Fault, New Zealand JF - Solid Earth N2 - New Zealand's Alpine Fault is a large, platebounding strike-slip fault, which ruptures in large (M-w > 8) earthquakes. We conducted field and laboratory analyses of fault rocks to assess its fault zone architecture. Results reveal that the Alpine Fault Zone has a complex geometry, comprising an anastomosing network of multiple slip planes that have accommodated different amounts of displacement. This contrasts with the previous perception of the Alpine Fault Zone, which assumes a single principal slip zone accommodated all displacement. This interpretation is supported by results of drilling projects and geophysical investigations. Furthermore, observations presented here show that the young, largely unconsolidated sediments that constitute the footwall at shallow depths have a significant influence on fault gouge rheological properties and structure. KW - san andreas fault KW - thickness-displacement relationships KW - central south island KW - Ion-Beam (FIB) KW - internal structure KW - hanging wall KW - Fluid Flow KW - frictional properties KW - weakening mechanisms KW - strain localization Y1 - 2020 U6 - https://doi.org/10.5194/se-11-95-2020 SN - 1869-9529 VL - 11 IS - 1 SP - 95 EP - 124 PB - Copernicus Publications CY - Göttingen ER - TY - GEN A1 - Terbishalieva, Baiansuluu A1 - Timmerman, Martin Jan A1 - Mikolaichuk, Alexander A1 - Altenberger, Uwe A1 - Slama, Jiri A1 - Schleicher, Anja Maria A1 - Sudo, Masafumi A1 - Sobel, Edward A1 - Cichy, Sarah Bettina T1 - Calc-alkaline volcanic rocks and zircon ages of the late Tonian BT - Early Cryogenian arc-related Big Naryn Complex in the Eastern Djetim-Too Range, Middle Tianshan block, Kyrgyzstan T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The Big Naryn Complex (BNC) in the East Djetim-Too Range of the Kyrgyz Middle Tianshan block is a tectonized, at least 2 km thick sequence of predominantly felsic to intermediate volcanic rocks intruded by porphyric rhyolite sills. It overlies a basement of metamorphic rocks and is overlain by late Neoproterozoic Djetim-Too Formation sediments; these also occur as tectonic intercalations in the BNC. The up to ca. 1100 m thick Lower Member is composed of predominantly rhyolites-to-dacites and minor basalts, while the at least 900 m thick pyroclastic Upper Member is dominated by rhyolitic-to-dacitic ignimbrites. Porphyric rhyolite sills are concentrated at the top of the Lower Member. A Lower Member rhyolite and a sill sample have LA-ICP-MS U-Pb zircon crystallization ages of 726.1 +/- 2.2 Ma and 720.3 +/- 6.5 Ma, respectively, showing that most of the magmatism occurred within a short time span in the late Tonian-early Cryogenian. Inherited zircons in the sill sample have Neoarchean (2.63, 2.64 Ga), Paleo- (2.33-1.81 Ga), Meso- (1.55 Ga), and Neoproterozoic (ca. 815 Ma) ages, and were derived from a heterogeneous Kuilyu Complex basement. A 1751 +/- 7 Ma Ar-40/Ar-39 age for amphibole from metagabbro is the age of cooling subsequent to Paleoproterozoic metamorphism of the Kuilyu Complex. The large amount of pyroclastic rocks, and their major and trace element compositions, the presence of Neoarchean to Neoproterozoic inherited zircons and a depositional basement of metamorphic rocks point to formation of the BNC in a continental magmatic arc setting. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1361 KW - Tianshan orogenic belt KW - Big Naryn complex KW - Tonian–Cryogenian KW - magmatic arc KW - calc-alkaline KW - Kuilyu complex Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-569585 SN - 1437-3254 SN - 1437-3262 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Terbishalieva, Baiansuluu A1 - Timmerman, Martin Jan A1 - Mikolaichuk, Alexander A1 - Altenberger, Uwe A1 - Slama, Jiri A1 - Schleicher, Anja Maria A1 - Sudo, Masafumi A1 - Sobel, Edward A1 - Cichy, Sarah Bettina T1 - Calc-alkaline volcanic rocks and zircon ages of the late Tonian BT - Early Cryogenian arc-related Big Naryn Complex in the Eastern Djetim-Too Range, Middle Tianshan block, Kyrgyzstan JF - International journal of earth sciences N2 - The Big Naryn Complex (BNC) in the East Djetim-Too Range of the Kyrgyz Middle Tianshan block is a tectonized, at least 2 km thick sequence of predominantly felsic to intermediate volcanic rocks intruded by porphyric rhyolite sills. It overlies a basement of metamorphic rocks and is overlain by late Neoproterozoic Djetim-Too Formation sediments; these also occur as tectonic intercalations in the BNC. The up to ca. 1100 m thick Lower Member is composed of predominantly rhyolites-to-dacites and minor basalts, while the at least 900 m thick pyroclastic Upper Member is dominated by rhyolitic-to-dacitic ignimbrites. Porphyric rhyolite sills are concentrated at the top of the Lower Member. A Lower Member rhyolite and a sill sample have LA-ICP-MS U-Pb zircon crystallization ages of 726.1 +/- 2.2 Ma and 720.3 +/- 6.5 Ma, respectively, showing that most of the magmatism occurred within a short time span in the late Tonian-early Cryogenian. Inherited zircons in the sill sample have Neoarchean (2.63, 2.64 Ga), Paleo- (2.33-1.81 Ga), Meso- (1.55 Ga), and Neoproterozoic (ca. 815 Ma) ages, and were derived from a heterogeneous Kuilyu Complex basement. A 1751 +/- 7 Ma Ar-40/Ar-39 age for amphibole from metagabbro is the age of cooling subsequent to Paleoproterozoic metamorphism of the Kuilyu Complex. The large amount of pyroclastic rocks, and their major and trace element compositions, the presence of Neoarchean to Neoproterozoic inherited zircons and a depositional basement of metamorphic rocks point to formation of the BNC in a continental magmatic arc setting. KW - Tianshan orogenic belt KW - Big Naryn complex KW - Tonian–Cryogenian KW - magmatic arc KW - calc-alkaline KW - Kuilyu complex Y1 - 2021 U6 - https://doi.org/10.1007/s00531-020-01956-z SN - 1437-3254 SN - 1437-3262 VL - 110 IS - 1 SP - 353 EP - 375 PB - Springer CY - New York ER -