TY - JOUR A1 - Kedracki, Dawid A1 - Chekini, Mahshid A1 - Maroni, Plinio A1 - Schlaad, Helmut A1 - Nardin, Corinne T1 - Synthesis and Self-Assembly of a DNA Molecular Brush JF - Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences N2 - We report herein on the polymer-crystallization-assisted thiol-ene photosynthesis of an amphiphilic comb/graft DNA copolymer, or molecular brush, composed of a hydrophobic poly(2-oxazoline) backbone and hydrophilic short single-stranded nucleic acid grafts. Coupling efficiencies are above 60% and thus higher as compared with the straight solid-phase-supported synthesis of amphiphilic DNA block copolymers. The DNA molecular brushes self-assemble into sub-micron-sized spherical structures in water as evidenced by light scattering as well as atomic force and electron microscopy imaging. The nucleotide sequences remain functional, as assessed by UV and fluorescence spectroscopy subsequent to isoindol synthesis at the surface of the structures. The determination of a vesicular morphology is supported by encapsulation and subsequent spectroscopy monitoring of the release of a water-soluble dye and spectroscopic quantification of the hybridization efficiency (30% in average) of the functional nucleic acid strands engaged in structure formation: about one-half of the nucleotide sequences are available for hybridization, whereas the other half are hindered within the self-assembled structure. Because speciation between complementary and non complementary sequences in the medium could be ascertained by confocal laser scanning microscopy, the stable self-assembled molecular brushes demonstrate the potential for sensing applications. Y1 - 2014 U6 - https://doi.org/10.1021/bm5008713 SN - 1525-7797 SN - 1526-4602 VL - 15 IS - 9 SP - 3375 EP - 3382 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Guiet, Amandine A1 - Goebel, Caren A1 - Klingan, Katharina A1 - Lublow, Michael A1 - Reier, Tobias A1 - Vainio, Ulla A1 - Kraehnert, Ralph A1 - Schlaad, Helmut A1 - Strasser, Peter A1 - Zaharieva, Ivelina A1 - Dau, Holger A1 - Driess, Matthias A1 - Polte, Joerg A1 - Fischer, Anna T1 - Hydrophobic Nanoreactor Soft-Templating: A Supramolecular Approach to Yolk@Shell Materials JF - Advanced functional materials N2 - Due to their unique morphology-related properties, yolk@shell materials are promising materials for catalysis, drug delivery, energy conversion, and storage. Despite their proven potential, large-scale applications are however limited due to demanding synthesis protocols. Overcoming these limitations, a simple soft-templated approach for the one-pot synthesis of yolk@shell nanocomposites and in particular of multicore metal nanoparticle@metal oxide nanostructures (M-NP@MOx) is introduced. The approach here, as demonstrated for Au-NP@ITOTR (ITOTR standing for tin-rich ITO), relies on polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) inverse micelles as two compartment nanoreactor templates. While the hydrophilic P4VP core incorporates the hydrophilic metal precursor, the hydrophobic PS corona takes up the hydrophobic metal oxide precursor. As a result, interfacial reactions between the precursors can take place, leading to the formation of yolk@shell structures in solution. Once calcined these micelles yield Au-NP@ITOTR nanostructures, composed of multiple 6 nm sized Au NPs strongly anchored onto the inner surface of porous 35 nm sized ITOTR hollow spheres. Although of multicore nature, only limited sintering of the metal nanoparticles is observed at high temperatures (700 degrees C). In addition, the as-synthesized yolk@shell structures exhibit high and stable activity toward CO electrooxidation, thus demonstrating the applicability of our approach for the design of functional yolk@shell nanocatalysts. KW - inverse micelles KW - nanoreactor KW - polystyrene-block-poly(4-vinylpyridine) KW - soft-templating KW - tin-rich ITO KW - yolk@shell materials Y1 - 2015 U6 - https://doi.org/10.1002/adfm.201502388 SN - 1616-301X SN - 1616-3028 VL - 25 IS - 39 SP - 6228 EP - 6240 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Secker, Christian A1 - Brosnan, Sarah M. A1 - Limberg, Felix Rolf Paul A1 - Braun, Ulrike A1 - Trunk, Matthias A1 - Strauch, Peter A1 - Schlaad, Helmut T1 - Thermally Induced Crosslinking of Poly(N-Propargyl Glycine) JF - Macromolecular chemistry and physics N2 - As polypeptoids become increasingly popular, they present a more soluble and processable alternative to natural and synthetic polypeptides; the breadth of their potential functionality slowly comes into focus. This report analyzes the ability of an alkyne-functionalized polypeptoid, poly(N-propargyl glycine), to crosslink upon heating. The crosslinking process is analyzed by thermal analysis (differential scanning calorimetry and thermogravimetric analysis), Fourier-transform infrared, electron paramagnetic resonance, and solid-state NMR spectroscopy. While a precise mechanism cannot be confidently assigned, it is clear that the reaction proceeds by a radical mechanism that exclusively involves the alkyne functionality, which, upon crosslinking, yields alkene and aromatic products. KW - Fourier-transform infrared KW - metal-free crosslinking KW - polypeptoid KW - propargyl KW - solid-state NMR Y1 - 2015 U6 - https://doi.org/10.1002/macp.201500223 SN - 1022-1352 SN - 1521-3935 VL - 216 IS - 21 SP - 2080 EP - 2085 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Madaan, Nitesh A1 - Romriell, Naomi A1 - Tuscano, Joshua A1 - Schlaad, Helmut A1 - Linford, Matthew R. T1 - Introduction of thiol moieties, including their thiol-ene reactions and air oxidation, onto polyelectrolyte multilayer substrates JF - Journal of colloid and interface science KW - Thiol-ene KW - Layer-by-layer KW - XPS KW - ToF-SIMS KW - Hydrophobic KW - AFM KW - Ellipsometry Y1 - 2015 U6 - https://doi.org/10.1016/j.jcis.2015.08.017 SN - 0021-9797 SN - 1095-7103 VL - 459 SP - 199 EP - 205 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Koshkina, Olga A1 - Lang, Thomas A1 - Thiermann, Raphael A1 - Docter, Dominic A1 - Stauber, Roland H. A1 - Secker, Christian A1 - Schlaad, Helmut A1 - Weidner, Steffen A1 - Mohr, Benjamin A1 - Maskos, Michael A1 - Bertin, Annabelle T1 - Temperature-Triggered Protein Adsorption on Polymer-Coated Nanoparticles in Serum JF - Langmuir N2 - The protein corona, which forms on the nanoparticle's surface in most biological media, determines the nanoparticle's physicochemical characteristics. The formation of the protein corona has a significant impact on the biodistribution and clearance of nanoparticles in vivo. Therefore, the ability to influence the formation of the protein corona is essential to most biomedical applications, including drug delivery and imaging. In this study, we investigate the protein adsorption on nanoparticles with a hydrodynamic radius of 30 nm and a coating of thermoresponsive poly(2-isopropyl-2-oxazoline) in serum. Using multiangle dynamic light scattering (DLS) we demonstrate that heating of the nanoparticles above their phase separation temperature induces the formation of agglomerates, with a hydrodynamic radius of 1 mu m. In serum, noticeably stronger agglomeration occurs at lower temperatures compared to serum-free conditions. Cryogenic transmission electron microscopy (cryo-TEM) revealed a high packing density of agglomerates when serum was not present. In contrast, in the presence of serum, agglomerated nanoparticles were loosely packed, indicating that proteins are intercalated between them. Moreover, an increase in protein content is observed upon heating, confirming that protein adsorption is induced by the alteration of the surface during phase separation. After cooling and switching the surface back, most of the agglomerates were dissolved and the main fraction returned to the original size of approximately 30 nm as shown by asymmetrical flow-field flow fractionation (AF-FFF) and DLS. Furthermore, the amounts of adsorbed proteins are similar before and after heating the nanoparticles to above their phase-separation temperature. Overall, our results demonstrate that the thermoresponsivity of the polymer coating enables turning the corona formation on nanoparticles on and off in situ. As the local heating of body areas can be easily done in vivo, the thermoresponsive coating could potentially be used to induce the agglomeration of nanopartides and proteins and the accumulation of nanoparticles in a targeted body region. Y1 - 2015 U6 - https://doi.org/10.1021/acs.langmuir.5b00537 SN - 0743-7463 VL - 31 IS - 32 SP - 8873 EP - 8881 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Secker, Christian A1 - Brosnan, Sarah M. A1 - Luxenhofer, Robert A1 - Schlaad, Helmut T1 - Poly(alpha-Peptoid)s Revisited: Synthesis, Properties, and Use as Biomaterial JF - Macromolecular bioscience N2 - Polypeptoids have been of great interest in the polymer science community since the early half of the last century; however, they had been basically forgotten materials until the last decades in which they have enjoyed an exciting revival. In this mini-review, we focus on the recent developments in polypeptoid chemistry, with particular focus on polymers synthesized by the ring-opening polymerization (ROP) of amino acid N-carboxyanhydrides (NCAs). Specifically, we will review traditional monomer synthesis (such as Leuchs, Katchalski, and Kricheldorf) and recent advances in polymerization methods to yield both linear, cyclic, and functional polymers, solution and bulk thermal properties, and preliminary results on the use of polypeptoids as biomaterials (i.e immunogenicity, biodistribution, degradability, and drug delivery). KW - amino acid N-carboxyanhydride (NCA) KW - biomaterials KW - peptides KW - properties KW - ring-opening polymerization Y1 - 2015 U6 - https://doi.org/10.1002/mabi.201500023 SN - 1616-5187 SN - 1616-5195 VL - 15 IS - 7 SP - 881 EP - 891 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Brosnan, Sarah M. A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics. KW - block copolymers KW - polymersomes KW - polysaccharides KW - self-assembly KW - vesicles Y1 - 2015 U6 - https://doi.org/10.1002/anie.201502100 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 33 SP - 9715 EP - 9718 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Zou, Hua A1 - Schlaad, Helmut T1 - Thermoresponsive PNIPAM/Silica Nanoparticles by Direct Photopolymerization in Aqueous Media JF - Journal of polymer science : A, Polymer chemistry N2 - This article presents a simple and facile method to fabricate thermoresponsive polymer-grafted silica particles by direct surface-initiated photopolymerization of N-isopropylacrylamide (NIPAM). This method is based on silica particles bearing thiol functionalities, which are transformed into thiyl radicals by irradiation with UV light to initiate the polymerization of NIPAM in aqueous media at room temperature. The photopolymerization of NIPAM could be applied to smaller thiol-functionalized particles (approximate to 48 nm) as well as to larger particles (approximate to 692 nm). Hollow poly(NIPAM) capsules could be formed after etching away the silica cores from the composite particles. It is possible to produce tailor-made composite particles or capsules for particular applications by extending this approach to other vinyl monomers. (c) 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015, 53, 1260-1267 KW - nanocomposites KW - nanoparticles KW - photopolymerization KW - silica nanoparticles KW - surface-initiated photopolymerization KW - thermoresponsive KW - thiol Y1 - 2015 U6 - https://doi.org/10.1002/pola.27593 SN - 0887-624X SN - 1099-0518 VL - 53 IS - 10 SP - 1260 EP - 1267 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Kedracki, Dawid A1 - Filippov, Sergey K. A1 - Gour, Nidhi A1 - Schlaad, Helmut A1 - Nardin, Corinne T1 - Formation of DNA-Copolymer Fibrils Through an Amyloid-Like Nucleation Polymerization Mechanism JF - Macromolecular rapid communications N2 - Conjugation of a hydrophobic poly(2-oxazoline) bearing tertiary amide groups along its backbone with a short single stranded nucleotide sequence results in an amphiphilic comb/graft copolymer, which organizes in fibrils upon direct dissolution in water. Supported by circular dichroism, atomic force microscopy, transmission electron microscopy, and scattering data, fibrils are formed through inter- and intramolecular hydrogen bonding between hydrogen accepting amide groups along the polymer backbone and hydrogen donating nucleic acid grafts leading to the formation of hollow tubes. KW - DNA copolymers KW - fibers KW - hydrogen bonding KW - nucleation polymerization KW - self-assembly Y1 - 2015 U6 - https://doi.org/10.1002/marc.201400728 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 8 SP - 768 EP - 773 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Vacogne, Charlotte D. A1 - Brosnan, Sarah M. A1 - Masic, Admir A1 - Schlaad, Helmut T1 - Fibrillar gels via the self-assembly of poly(L-glutamate)-based statistical copolymers JF - Polymer Chemistry N2 - Polypeptides having secondary structures often undergo self-assembly which can extend over multiple length scales. Poly(gamma-benzyl-L-glutamate) (PBLG), for example, folds into a-helices and forms physical organogels, whereas poly(L-glutamic acid) (PLGA at acidic pH) or poly(L-glutamate) (PLG at neutral/basic pH) do not form hydrogels. We explored the gelation of modified PBLG and investigated the deprotection of the carboxylic acid moieties in such gels to yield unique hydrogels. This was accomplished through photo-crosslinking gelation of poly(gamma-benzyl-L-glutamate-co-allylglycine) statistical copolymers in toluene, tetrahydrofuran, and 1,4-dioxane. Unlike most polymer-based chemical gels, our gels were prepared from dilute solutions (<20 g L-1, i.e., <2% w/v) of low molar mass polymers. Despite such low concentrations and molar masses, our dioxane gels showed high mechanical stability and little shrinkage; remarkably, they also exhibited a porous fibrillar network. Deprotection of the carboxylic acid moieties in dioxane gels yielded pH responsive and highly absorbent PLGA/PLG-based hydrogels (swelling ratio of up to 87), while preserving the network structure, which is an unprecedented feature in the context of crosslinked PLGA gels. These outstanding properties are highly attractive for biomedical materials. Y1 - 2015 U6 - https://doi.org/10.1039/c5py00491h SN - 1759-9954 SN - 1759-9962 VL - 6 IS - 28 SP - 5040 EP - 5052 PB - Royal Society of Chemistry CY - Cambridge ER -