TY  - JOUR
A1  - Perdigón-Toro, Lorena
A1  - Zhang, Huotian
A1  - Markina, Anastaa si
A1  - Yuan, Jun
A1  - Hosseini, Seyed Mehrdad
A1  - Wolff, Christian Michael
A1  - Zuo, Guangzheng
A1  - Stolterfoht, Martin
A1  - Zou, Yingping
A1  - Gao, Feng
A1  - Andrienko, Denis
A1  - Shoaee, Safa
A1  - Neher, Dieter
T1  - Barrierless free charge generation in the high-performance PM6:Y6 bulk heterojunction non-fullerene solar cell
JF  - Advanced materials
N2  - Organic solar cells are currently experiencing a second golden age thanks to the development of novel non-fullerene acceptors (NFAs). Surprisingly, some of these blends exhibit high efficiencies despite a low energy offset at the heterojunction. Herein, free charge generation in the high-performance blend of the donor polymer PM6 with the NFA Y6 is thoroughly investigated as a function of internal field, temperature and excitation energy. Results show that photocurrent generation is essentially barrierless with near-unity efficiency, regardless of excitation energy. Efficient charge separation is maintained over a wide temperature range, down to 100 K, despite the small driving force for charge generation. Studies on a blend with a low concentration of the NFA, measurements of the energetic disorder, and theoretical modeling suggest that CT state dissociation is assisted by the electrostatic interfacial field which for Y6 is large enough to compensate the Coulomb dissociation barrier.
KW  - driving force
KW  - non-fullerene acceptors
KW  - organic solar cells
KW  - photocurrent generation
Y1  - 2020
U6  - https://doi.org/10.1002/adma.201906763
SN  - 0935-9648
SN  - 1521-4095
VL  - 32
IS  - 9
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Sandberg, Oskar J.
A1  - Kurpiers, Jona
A1  - Stolterfoht, Martin
A1  - Neher, Dieter
A1  - Meredith, Paul
A1  - Shoaee, Safa
A1  - Armin, Ardalan
T1  - On the question of the need for a built-in potential in Perovskite solar cells
JF  - Advanced materials interfaces
N2  - Perovskite semiconductors as the active materials in efficient solar cells exhibit free carrier diffusion lengths on the order of microns at low illumination fluxes and many hundreds of nanometers under 1 sun conditions. These lengthscales are significantly larger than typical junction thicknesses, and thus the carrier transport and charge collection should be expected to be diffusion controlled. A consensus along these lines is emerging in the field. However, the question as to whether the built-in potential plays any role is still of matter of some conjecture. This important question using phase-sensitive photocurrent measurements and theoretical device simulations based upon the drift-diffusion framework is addressed. In particular, the role of the built-in electric field and charge-selective transport layers in state-of-the-art p-i-n perovskite solar cells comparing experimental findings and simulation predictions is probed. It is found that while charge collection in the junction does not require a drift field per se, a built-in potential is still needed to avoid the formation of reverse electric fields inside the active layer, and to ensure efficient extraction through the charge transport layers.
KW  - built-in potential
KW  - charge collection
KW  - charge transport layers
KW  - perovskite solar cells
Y1  - 2020
U6  - https://doi.org/10.1002/admi.202000041
SN  - 2196-7350
VL  - 7
IS  - 10
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - GEN
A1  - Wolff, Christian Michael
A1  - Canil, Laura
A1  - Rehermann, Carolin
A1  - Nguyen, Ngoc Linh
A1  - Zu, Fengshuo
A1  - Ralaiarisoa, Maryline
A1  - Caprioglio, Pietro
A1  - Fiedler, Lukas
A1  - Stolterfoht, Martin
A1  - Kogikoski, Junior, Sergio
A1  - Bald, Ilko
A1  - Koch, Norbert
A1  - Unger, Eva L.
A1  - Dittrich, Thomas
A1  - Abate, Antonio
A1  - Neher, Dieter
T1  - Correction to 'Perfluorinated self-assembled monolayers enhance the stability and efficiency of inverted perovskite solar cells' (2020, 14 (2), 1445−1456)
T2  - ACS nano
Y1  - 2020
U6  - https://doi.org/10.1021/acsnano.0c08081
SN  - 1936-0851
SN  - 1936-086X
VL  - 14
IS  - 11
SP  - 16156
EP  - 16156
PB  - American Chemical Society
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Wang, Qiong
A1  - Smith, Joel A.
A1  - Skroblin, Dieter
A1  - Steele, Julian A.
A1  - Wolff, Christian Michael
A1  - Caprioglio, Pietro
A1  - Stolterfoht, Martin
A1  - Köbler, Hans
A1  - Turren-Cruz, Silver-Hamill
A1  - Li, Meng
A1  - Gollwitzer, Christian
A1  - Neher, Dieter
A1  - Abate, Antonio
T1  - Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells
JF  - Solar RRL
N2  - Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells.
KW  - cesium lead halides
KW  - crystal orientation
KW  - inorganic perovskites
KW  - ISOS-L-1I protocol
KW  - phase purity
KW  - photostability
Y1  - 2020
VL  - 4
IS  - 9
PB  - WILEY-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Samson, Stephanie
A1  - Rech, Jeromy
A1  - Perdigón-Toro, Lorena
A1  - Peng, Zhengxing
A1  - Shoaee, Safa
A1  - Ade, Harald
A1  - Neher, Dieter
A1  - Stolterfoht, Martin
A1  - You, Wei
T1  - Organic solar cells with large insensitivity to donor polymer molar mass across all acceptor classes
JF  - ACS applied polymer materials
N2  - Donor polymer number-average molar mass (M-n) has long been known to influence organic photovoltaic (OPV) performance via changes in both the polymer properties and the resulting bulk heterojunction morphology. The exact nature of these M-n effects varies from system to system, although there is generally some intermediate M-n that results in optimal performance. Interestingly, our earlier work with the difluorobenzotriazole (FTAZ)-based donor polymer, paired with either N2200 (polymer acceptor) or PC61BM (fullerene acceptor), PcBm demonstrated <10% variation in power conversion efficiency and a consistent morphology over a large span of M-n (30 kg/mol to over 100 kg/mol). Would such insensitivity to polymer M-n still hold true when prevailing small molecular acceptors were used with FTAZ? To answer this question, we explored the impact of FTAZ on OPVs with ITIC, a high-performance small-molecule fused-ring electron acceptor (FREA). By probing the photovoltaic characteristics of the resulting OPVs, we show that a similar FTAZ mn insensitivity is also found in the FTAZ:ITIC system. This study highlights a single-donor polymer which, when paired with an archetypal fullerene, polymer, and FREA, results in systems that are largely insensitive to donor M. Our results may have implications in polymer batch-to-batch reproducibility, in particular, relaxing the need for tight M-n control during synthesis.
KW  - polymer solar cells
KW  - conjugated polymers
KW  - fullerenes
KW  - fluorination
KW  - molecular weight
KW  - non-fullerene acceptors
KW  - power conversion efficiency
Y1  - 2020
U6  - https://doi.org/10.1021/acsapm.0c01041
SN  - 2637-6105
VL  - 2
IS  - 11
SP  - 5300
EP  - 5308
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - GEN
A1  - Schulze, Patricia S. C.
A1  - Bett, Alexander J.
A1  - Bivour, Martin
A1  - Caprioglio, Pietro
A1  - Gerspacher, Fabian M.
A1  - Kabaklı, Özde Ş.
A1  - Richter, Armin
A1  - Stolterfoht, Martin
A1  - Zhang, Qinxin
A1  - Neher, Dieter
A1  - Hermle, Martin
A1  - Hillebrecht, Harald
A1  - Glunz, Stefan W.
A1  - Goldschmidt, Jan Christoph
T1  - 25.1% high-efficiency monolithic perovskite silicon tandem solar cell with a high bandgap perovskite absorber
T2  - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1197 
KW  - heterojunction silicon solar cells
KW  - interfaces
KW  - perovskite solar cells
KW  - tandem solar cells
KW  - thin films
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525668
SN  - 1866-8372
IS  - 7
ER  - 
TY  - JOUR
A1  - Schulze, Patricia S. C.
A1  - Bett, Alexander J.
A1  - Bivour, Martin
A1  - Caprioglio, Pietro
A1  - Gerspacher, Fabian M.
A1  - Kabaklı, Özde Ş.
A1  - Richter, Armin
A1  - Stolterfoht, Martin
A1  - Zhang, Qinxin
A1  - Neher, Dieter
A1  - Hermle, Martin
A1  - Hillebrecht, Harald
A1  - Glunz, Stefan W.
A1  - Goldschmidt, Jan Christoph
T1  - 25.1% high-efficiency monolithic perovskite silicon tandem solar cell with a high bandgap perovskite absorber
JF  - Solar RRL
N2  - Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
KW  - heterojunction silicon solar cells
KW  - interfaces
KW  - perovskite solar cells
KW  - tandem solar cells
KW  - thin films
Y1  - 2020
VL  - 4
IS  - 7
PB  - John Wiley & Sons, Inc.
CY  - New Jersey
ER  - 
TY  - GEN
A1  - Stolterfoht, Martin
A1  - Grischek, Max
A1  - Caprioglio, Pietro
A1  - Wolff, Christian Michael
A1  - Gutierrez-Partida, Emilio
A1  - Peña-Camargo, Francisco
A1  - Rothhardt, Daniel
A1  - Zhang, Shanshan
A1  - Raoufi, Meysam
A1  - Wolansky, Jakob
A1  - Abdi-Jalebi, Mojtaba
A1  - Stranks, Samuel D.
A1  - Albrecht, Steve
A1  - Kirchartz, Thomas
A1  - Neher, Dieter
T1  - How to quantify the efficiency potential of neat perovskite films
BT  - Perovskite semiconductors with an implied efficiency exceeding 28%
T2  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1434 
KW  - non-radiative interface recombination
KW  - perovskite solar cells
KW  - photoluminescence
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-516622
SN  - 1866-8372
IS  - 17
ER  - 
TY  - JOUR
A1  - Stolterfoht, Martin
A1  - Grischek, Max
A1  - Caprioglio, Pietro
A1  - Wolff, Christian Michael
A1  - Gutierrez-Partida, Emilio
A1  - Peña-Camargo, Francisco
A1  - Rothhardt, Daniel
A1  - Zhang, Shanshan
A1  - Raoufi, Meysam
A1  - Wolansky, Jakob
A1  - Abdi-Jalebi, Mojtaba
A1  - Stranks, Samuel D.
A1  - Albrecht, Steve
A1  - Kirchartz, Thomas
A1  - Neher, Dieter
T1  - How to quantify the efficiency potential of neat perovskite films
BT  - Perovskite semiconductors with an implied efficiency exceeding 28%
JF  - Advanced Materials
N2  - Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
KW  - non-radiative interface recombination
KW  - perovskite solar cells
KW  - photoluminescence
Y1  - 2020
U6  - https://doi.org/10.1002/adma.202000080
SN  - 0935-9648
SN  - 1521-4095
VL  - 32
IS  - 17
SP  - 1
EP  - 10
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Wang, Qiong
A1  - Smith, Joel A.
A1  - Skroblin, Dieter
A1  - Steele, Julian A.
A1  - Wolff, Christian Michael
A1  - Caprioglio, Pietro
A1  - Stolterfoht, Martin
A1  - Köbler, Hans
A1  - Turren-Cruz, Silver-Hamill
A1  - Li, Meng
A1  - Gollwitzer, Christian
A1  - Neher, Dieter
A1  - Abate, Antonio
T1  - Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells
T2  - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1210 
KW  - cesium lead halides
KW  - crystal orientation
KW  - inorganic perovskites
KW  - ISOS-L-1I protocol
KW  - phase purity
KW  - photostability
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525374
SN  - 1866-8372
IS  - 9
ER  -