TY  - GEN
A1  - Stolterfoht, Martin
A1  - Grischek, Max
A1  - Caprioglio, Pietro
A1  - Wolff, Christian Michael
A1  - Gutierrez-Partida, Emilio
A1  - Peña-Camargo, Francisco
A1  - Rothhardt, Daniel
A1  - Zhang, Shanshan
A1  - Raoufi, Meysam
A1  - Wolansky, Jakob
A1  - Abdi-Jalebi, Mojtaba
A1  - Stranks, Samuel D.
A1  - Albrecht, Steve
A1  - Kirchartz, Thomas
A1  - Neher, Dieter
T1  - How to quantify the efficiency potential of neat perovskite films
BT  - Perovskite semiconductors with an implied efficiency exceeding 28%
T2  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1434 
KW  - non-radiative interface recombination
KW  - perovskite solar cells
KW  - photoluminescence
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-516622
SN  - 1866-8372
IS  - 17
ER  - 
TY  - JOUR
A1  - Stolterfoht, Martin
A1  - Grischek, Max
A1  - Caprioglio, Pietro
A1  - Wolff, Christian Michael
A1  - Gutierrez-Partida, Emilio
A1  - Peña-Camargo, Francisco
A1  - Rothhardt, Daniel
A1  - Zhang, Shanshan
A1  - Raoufi, Meysam
A1  - Wolansky, Jakob
A1  - Abdi-Jalebi, Mojtaba
A1  - Stranks, Samuel D.
A1  - Albrecht, Steve
A1  - Kirchartz, Thomas
A1  - Neher, Dieter
T1  - How to quantify the efficiency potential of neat perovskite films
BT  - Perovskite semiconductors with an implied efficiency exceeding 28%
JF  - Advanced Materials
N2  - Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
KW  - non-radiative interface recombination
KW  - perovskite solar cells
KW  - photoluminescence
Y1  - 2020
U6  - https://doi.org/10.1002/adma.202000080
SN  - 0935-9648
SN  - 1521-4095
VL  - 32
IS  - 17
SP  - 1
EP  - 10
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Chen, Zupeng
A1  - Savateev, Aleksandr
A1  - Pronkin, Sergey
A1  - Papaefthimiou, Vasiliki
A1  - Wolff, Christian Michael
A1  - Willinger, Marc Georg
A1  - Willinger, Elena
A1  - Neher, Dieter
A1  - Antonietti, Markus
A1  - Dontsova, Dariya
T1  - "The Easier the Better" Preparation of Efficient Photocatalysts-Metastable Poly(heptazine imide) Salts
JF  - Advanced materials
N2  - Cost-efficient, visible-light-driven hydrogen production from water is an attractive potential source of clean, sustainable fuel. Here, it is shown that thermal solid state reactions of traditional carbon nitride precursors (cyanamide, melamine) with NaCl, KCl, or CsCl are a cheap and straightforward way to prepare poly(heptazine imide) alkali metal salts, whose thermodynamic stability decreases upon the increase of the metal atom size. The chemical structure of the prepared salts is confirmed by the results of X-ray photoelectron and infrared spectroscopies, powder X-ray diffraction and electron microscopy studies, and, in the case of sodium poly(heptazine imide), additionally by atomic pair distribution function analysis and 2D powder X-ray diffraction pattern simulations. In contrast, reactions with LiCl yield thermodynamically stable poly(triazine imides). Owing to the metastability and high structural order, the obtained heptazine imide salts are found to be highly active photo-catalysts in Rhodamine B and 4-chlorophenol degradation, and Pt-assisted sacrificial water reduction reactions under visible light irradiation. The measured hydrogen evolution rates are up to four times higher than those provided by a benchmark photocatalyst, mesoporous graphitic carbon nitride. Moreover, the products are able to photocatalytically reduce water with considerable reaction rates, even when glycerol is used as a sacrificial hole scavenger.
KW  - carbon nitride
KW  - glycerol oxidation
KW  - mesocrystals
KW  - poly(heptazine imide)
KW  - water reduction reactions
Y1  - 2017
U6  - https://doi.org/10.1002/adma.201700555
SN  - 0935-9648
SN  - 1521-4095
VL  - 29
SP  - 21800
EP  - 21806
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Wolff, Christian Michael
A1  - Canil, Laura
A1  - Rehermann, Carolin
A1  - Nguyen, Ngoc Linh
A1  - Zu, Fengshuo
A1  - Ralaiarisoa, Maryline
A1  - Caprioglio, Pietro
A1  - Fiedler, Lukas
A1  - Stolterfoht, Martin
A1  - Kogikoski, Junior, Sergio
A1  - Bald, Ilko
A1  - Koch, Norbert
A1  - Unger, Eva L.
A1  - Dittrich, Thomas
A1  - Abate, Antonio
A1  - Neher, Dieter
T1  - Correction to 'Perfluorinated self-assembled monolayers enhance the stability and efficiency of inverted perovskite solar cells' (2020, 14 (2), 1445−1456)
T2  - ACS nano
Y1  - 2020
U6  - https://doi.org/10.1021/acsnano.0c08081
SN  - 1936-0851
SN  - 1936-086X
VL  - 14
IS  - 11
SP  - 16156
EP  - 16156
PB  - American Chemical Society
CY  - Washington, DC
ER  - 
TY  - GEN
A1  - Wang, Qiong
A1  - Smith, Joel A.
A1  - Skroblin, Dieter
A1  - Steele, Julian A.
A1  - Wolff, Christian Michael
A1  - Caprioglio, Pietro
A1  - Stolterfoht, Martin
A1  - Köbler, Hans
A1  - Turren-Cruz, Silver-Hamill
A1  - Li, Meng
A1  - Gollwitzer, Christian
A1  - Neher, Dieter
A1  - Abate, Antonio
T1  - Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells
T2  - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1210 
KW  - cesium lead halides
KW  - crystal orientation
KW  - inorganic perovskites
KW  - ISOS-L-1I protocol
KW  - phase purity
KW  - photostability
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525374
SN  - 1866-8372
IS  - 9
ER  - 
TY  - JOUR
A1  - Braunger, Steffen
A1  - Mundt, Laura E.
A1  - Wolff, Christian Michael
A1  - Mews, Mathias
A1  - Rehermann, Carolin
A1  - Jost, Marko
A1  - Tejada, Alvaro
A1  - Eisenhauer, David
A1  - Becker, Christiane
A1  - Andres Guerra, Jorge
A1  - Unger, Eva
A1  - Korte, Lars
A1  - Neher, Dieter
A1  - Schubert, Martin C.
A1  - Rech, Bernd
A1  - Albrecht, Steve
T1  - Cs(x)FA(1-x)Pb(l(1-y)Br(y))(3) Perovskite Compositions
BT  - the Appearance of Wrinkled Morphology and its Impact on Solar Cell Performance
JF  - The journal of physical chemistry : C, Nanomaterials and interfaces
N2  - We report on the formation of wrinkle-patterned surface morphologies in cesium formamidinium-based Cs(x)FA(1-y)Pb(I1-yBry)(3) perovskite compositions with x = 0-0.3 and y = 0-0.3 under various spin-coating conditions. By varying the Cs and Br contents, the perovskite precursor solution concentration and the spin-coating procedure, the occurrence and characteristics of the wrinkle-shaped morphology can be tailored systematically. Cs(0.17)FA(0.83)Pb(I0.83Br0.17)(3) perovskite layers were analyzed regarding their surface roughness, microscopic structure, local and overall composition, and optoelectronic properties. Application of these films in p-i-n perovskite solar cells (PSCs) with indium-doped tin oxide/NiOx/perovskite/C-60/bathocuproine/Cu architecture resulted in up to 15.3 and 17.0% power conversion efficiency for the flat and wrinkled morphology, respectively. Interestingly, we find slightly red-shifted photoluminescence (PL) peaks for wrinkled areas and we are able to directly correlate surface topography with PL peak mapping. This is attributed to differences in the local grain size, whereas there is no indication for compositional demixing in the films. We show that the perovskite composition, crystallization kinetics, and layer thickness strongly influence the formation of wrinkles which is proposed to be related to the release of compressive strain during perovskite crystallization. Our work helps us to better understand film formation and to further improve the efficiency of PSCs with widely used mixed-perovskite compositions.
Y1  - 2018
U6  - https://doi.org/10.1021/acs.jpcc.8b06459
SN  - 1932-7447
SN  - 1932-7455
VL  - 122
IS  - 30
SP  - 17123
EP  - 17135
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - GEN
A1  - Saliba, Michael
A1  - Stolterfoht, Martin
A1  - Wolff, Christian Michael
A1  - Neher, Dieter
A1  - Abate, Antonio
T1  - Measuring aging stability of perovskite solar cells
T2  - Joule
Y1  - 2018
U6  - https://doi.org/10.1016/j.joule.2018.05.005
SN  - 2542-4351
VL  - 2
IS  - 6
SP  - 1019
EP  - 1024
PB  - Cell Press
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Kegelmann, Lukas
A1  - Tockhorn, Philipp
A1  - Wolff, Christian Michael
A1  - Márquez, José A.
A1  - Caicedo Dávila, Sebastián
A1  - Korte, Lars
A1  - Unold, Thomas
A1  - Loevenich, Wilfried
A1  - Neher, Dieter
A1  - Rech, Bernd
A1  - Albrecht, Steve
T1  - Mixtures of Dopant-Free Spiro-OMeTAD and Water-Free PEDOT as a Passivating Hole Contact in Perovskite Solar Cells
JF  - ACS applied materials & interfaces
N2  - Doped spiro-OMeTAD at present is the most commonly used hole transport material (HTM) in n-i-p-type perovskite solar cells, enabling high efficiencies around 22%. However, the required dopants were shown to induce nonradiative recombination of charge carriers and foster degradation of the solar cell. Here, in a novel approach, highly conductive and inexpensive water-free poly(3,4-ethylenedioxythiophene) (PEDOT) is used to replace these dopants. The resulting spiro-OMeTAD/PEDOT (SpiDOT) mixed films achieve higher lateral conductivities than layers of doped spiro-OMeTAD. Furthermore, combined transient and steady-state photoluminescence studies reveal a passivating effect of PEDOT, suppressing nonradiative recombination losses at the perovskite/HTM interface. This enables excellent quasi-Fermi level splitting values of up to 1.24 eV in perovskite/SpiDOT layer stacks and high open-circuit voltages (V-OC) up to 1.19 V in complete solar cells. Increasing the amount of dopant-free spiro-OMeTAD in SpiDOT layers is shown to enhance hole extraction and thereby improves the fill factor in solar cells. As a consequence, stabilized efficiencies up to 18.7% are realized, exceeding cells with doped spiro-OMeTAD as a HTM in this study. Moreover, to the best of our knowledge, these results mark the lowest nonradiative recombination loss in the V-OC (140 mV with respect to the Shockley-Queisser limit) and highest efficiency reported so far for perovskite solar cells using PEDOT as a HTM.
KW  - perovskite solar cell
KW  - selective contact
KW  - spiro-OMeTAD
KW  - PEDOT
KW  - recombination
KW  - passivation
KW  - quasi-Fermi level splitting
Y1  - 2019
U6  - https://doi.org/10.1021/acsami.9b01332
SN  - 1944-8244
SN  - 1944-8252
VL  - 11
IS  - 9
SP  - 9172
EP  - 9181
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Wang, Qiong
A1  - Smith, Joel A.
A1  - Skroblin, Dieter
A1  - Steele, Julian A.
A1  - Wolff, Christian Michael
A1  - Caprioglio, Pietro
A1  - Stolterfoht, Martin
A1  - Köbler, Hans
A1  - Turren-Cruz, Silver-Hamill
A1  - Li, Meng
A1  - Gollwitzer, Christian
A1  - Neher, Dieter
A1  - Abate, Antonio
T1  - Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells
JF  - Solar RRL
N2  - Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells.
KW  - cesium lead halides
KW  - crystal orientation
KW  - inorganic perovskites
KW  - ISOS-L-1I protocol
KW  - phase purity
KW  - photostability
Y1  - 2020
VL  - 4
IS  - 9
PB  - WILEY-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Zu, Fengshuo
A1  - Wolff, Christian Michael
A1  - Ralaiarisoa, Maryline
A1  - Amsalem, Patrick
A1  - Neher, Dieter
A1  - Koch, Norbert
T1  - Unraveling the Electronic Properties of Lead Halide Perovskites with Surface Photovoltage in Photoemission Studies
JF  - ACS applied materials & interfaces
N2  - The tremendous success of metal-halide perovskites, especially in the field of photovoltaics, has triggered a substantial number of studies in understanding their optoelectronic properties. However, consensus regarding the electronic properties of these perovskites is lacking due to a huge scatter in the reported key parameters, such as work function (Φ) and valence band maximum (VBM) values. Here, we demonstrate that the surface photovoltage (SPV) is a key phenomenon occurring at the perovskite surfaces that feature a non-negligible density of surface states, which is more the rule than an exception for most materials under study. With ultraviolet photoelectron spectroscopy (UPS) and Kelvin probe, we evidence that even minute UV photon fluxes (500 times lower than that used in typical UPS experiments) are sufficient to induce SPV and shift the perovskite Φ and VBM by several 100 meV compared to dark. By combining UV and visible light, we establish flat band conditions (i.e., compensate the surface-state-induced surface band bending) at the surface of four important perovskites, and find that all are p-type in the bulk, despite a pronounced n-type surface character in the dark. The present findings highlight that SPV effects must be considered in all surface studies to fully understand perovskites’ photophysical properties.
KW  - lead halide perovskite films
KW  - ultraviolet photoelectron spectroscopy
KW  - Kelvin probe
KW  - surface band bending
KW  - surface photovoltage
KW  - surface states
Y1  - 2019
U6  - https://doi.org/10.1021/acsami.9b05293
SN  - 1944-8244
SN  - 1944-8252
VL  - 11
IS  - 24
SP  - 21578
EP  - 21583
PB  - American Chemical Society
CY  - Washington
ER  -