TY  - JOUR
A1  - Le Corre, Vincent M.
A1  - Stolterfoht, Martin
A1  - Perdigón-Toro, Lorena
A1  - Feuerstein, Markus
A1  - Wolff, Christian Michael
A1  - Gil-Escrig, Lidon
A1  - Bolink, Henk J.
A1  - Neher, Dieter
A1  - Koster, L. Jan Anton
T1  - Charge Transport Layers Limiting the Efficiency of Perovskite Solar Cells: How To Optimize Conductivity, Doping, and Thickness
JF  - ACS Applied Energy Materials
N2  - Perovskite solar cells (PSCs) are one of the main research topics of the photovoltaic community; with efficiencies now reaching up to 24%, PSCs are on the way to catching up with classical inorganic solar cells. However, PSCs have not yet reached their full potential. In fact, their efficiency is still limited by nonradiative recombination, mainly via trap-states and by losses due to the poor transport properties of the commonly used transport layers (TLs). Indeed, state-of-the-art TLs (especially if organic) suffer from rather low mobilities, typically within 10(-5) and 10(-2) cm(-2) V-1 s(-1), when compared to the high mobilities, 1-10 cm(-2) V-1 s(-1), measured for perovskites. This work presents a comprehensive analysis of the effect of the mobility, thickness, and doping density of the transport layers based on combined experimental and modeling results of two sets of devices made of a solution-processed high-performing triple-cation (PCE approximate to 20%). The results are also cross-checked on vacuum-processed MAPbI(3) devices. From this analysis, general guidelines on how to optimize a TL are introduced and especially a new and simple formula to easily calculate the amount of doping necessary to counterbalance the low mobility of the TLs.
KW  - perovskite solar cells
KW  - transport layers
KW  - conductivity
KW  - doping
KW  - charge transport
Y1  - 2019
U6  - https://doi.org/10.1021/acsaem.9b00856
SN  - 2574-0962
VL  - 2
IS  - 9
SP  - 6280
EP  - 6287
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Stolterfoht, Martin
A1  - Le Corre, Vincent M.
A1  - Feuerstein, Markus
A1  - Caprioglio, Pietro
A1  - Koster, Lambert Jan Anton
A1  - Neher, Dieter
T1  - Voltage-Dependent Photoluminescence and How It Correlates with the Fill Factor and Open-Circuit Voltage in Perovskite Solar Cells
JF  - Acs energy letters
N2  - Optimizing the photoluminescence (PL) yield of a solar cell has long been recognized as a key principle to maximize the power conversion efficiency. While PL measurements are routinely applied to perovskite films and solar cells under open circuit conditions (V-OC), it remains unclear how the emission depends on the applied voltage. Here, we performed PL(V) measurements on perovskite cells with different hole transport layer thicknesses and doping concentrations, resulting in remarkably different fill factors (FFs). The results reveal that PL(V) mirrors the current-voltage (JV) characteristics in the power-generating regime, which highlights an interesting correlation between radiative and nonradiative recombination losses. In particular, high FF devices show a rapid quenching of PL(V) from open-circuit to the maximum power point. We conclude that, while the PL has to be maximized at V-OC at lower biases < V-OC the PL must be rapidly quenched as charges need to be extracted prior to recombination.
Y1  - 2019
U6  - https://doi.org/10.1021/acsenergylett.9b02262
SN  - 2380-8195
VL  - 4
IS  - 12
SP  - 2887
EP  - 2892
PB  - American Chemical Society
CY  - Washington
ER  -