TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Dey, Subarna A1 - Attallah, Ahmed G. A1 - Krause-Rehberg, Reinhard A1 - Janiak, Christoph A1 - Holdt, Hans-Jürgen T1 - Insights into the pores of microwave-assisted metal-imidazolate frameworks showing enhanced gas sorption JF - Dalton transactions : a journal of inorganic chemistry, including bioinorganic, organometallic, and solid-state chemistry N2 - Microwave heating (MW)-assisted synthesis has been widely applied as an alternative method for the chemical synthesis of organic and inorganic materials. In this work, we report MW-assisted synthesis of three isostructural 3D frameworks with a flexible linker arm of the chelating linker 2-substituted imidazolate- 4-amide-5-imidate, named IFP-7-MW (M = Zn, R = OMe), IFP-8-MW (M = Co; R = OMe) and IFP-10-MW (M = Co; R = OEt) (IFP = Imidazolate Framework Potsdam). These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under MW-and also conventional electrical heating (CE)-assisted conditions in DMF. The structure of these materials was determined by IR spectroscopy and powder X-ray diffraction (PXRD) and the identity of the materials synthesized under CE-conditions was established. Materials obtained from MW-heating show many fold enhancement of CO2 and H-2 uptake capacities, compared to the analogous CE-heating method based materials. To understand the inner pore-sizes of IFP structures and variations of gas sorptions, we performed positron annihilation lifetime spectroscopy (PALS), which shows that MW-assisted materials have smaller pore sizes than materials synthesized under CE-conditions. The "kinetically controlled" MW-synthesized material has an inherent ability to trap extra linkers, thereby reducing the pore sizes of CE-materials to ultra/micropores. These ultramicropores are responsible for high gas sorption. Y1 - 2017 U6 - https://doi.org/10.1039/c7dt00350a SN - 1477-9226 SN - 1477-9234 VL - 46 SP - 4824 EP - 4833 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Kreuzer, Alex A1 - Behrens, Karsten A1 - Schütz, Gisela A1 - Holdt, Hans-Jürgen A1 - Hirscher, Michael T1 - Systematic experimental study on quantum sieving of hydrogen isotopes in metal-amide-imidazolate frameworks with narrow 1-D channels JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - Quantum sieving of hydrogen isotopes is experimentally studied in isostructural hexagonal metal-organic frameworks having 1-D channels, named IFP-1, -3, -4 and -7. Inside the channels, different molecules or atoms restrict the channel diameter periodically with apertures larger (4.2 angstrom for IFP-1, 3.1 angstrom for IFP-3) and smaller (2.1 angstrom for IFP-7, 1.7 angstrom for IFP-4) than the kinetic diameter of hydrogen isotopes. From a geometrical point of view, no gas should penetrate into IFP-7 and IFP-4, but due to the thermally induced flexibility, so-called gate-opening effect of the apertures, penetration becomes possible with increasing temperature. Thermal desorption spectroscopy (TDS) measurements with pure H-2 or D-2 have been applied to study isotope adsorption. Further TDS experiments after exposure to an equimolar H-2/D-2 mixture allow to determine directly the selectivity of isotope separation by quantum sieving. IFP-7 shows a very low selectivity not higher than S=2. The selectivity of the materials with the smallest pore aperture IFP-4 has a constant value of S approximate to 2 for different exposure times and pressures, which can be explained by the 1-D channel structure. Due to the relatively small cavities between the apertures of IFP-4 and IFP-7, molecules in the channels cannot pass each other, which leads to a single-file filling. Therefore, no time dependence is observed, since the quantum sieving effect occurs only at the outermost pore aperture, resulting in a low separation selectivity. KW - gas adsorption KW - hydrogen isotopes KW - isotope separation KW - metal-organic frameworks KW - quantum sieving Y1 - 2019 U6 - https://doi.org/10.1002/cphc.201900183 SN - 1439-4235 SN - 1439-7641 VL - 20 IS - 10 SP - 1311 EP - 1315 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Otter, Dirk A1 - Mondal, Suvendu Sekhar A1 - Alrefai, Anas A1 - Krätz, Lorenz A1 - Holdt, Hans-Jürgen A1 - Bart, Hans-Jörg T1 - Characterization of an isostructural MOF series of Imidazolate Frameworks Potsdam by means of sorption experiments with water vapor JF - Nanomaterials N2 - Sorption measurements of water vapor on an isoreticular series of Imidazolate Frameworks Potsdam (IFP), based on penta-coordinated metal centers with secondary building units (SBUs) connected by multidentate amido-imidate-imidazolate linkers, have been carried out at 303.15 K. The isotherm shapes were analyzed in order to gain insight into material properties and compared to sorption experiments with nitrogen at 77.4 K and carbon dioxide at 273.15 K. Results show that water vapor sorption measurements are strongly influenced by the pore size distribution while having a distinct hysteresis loop between the adsorption and desorption branch in common. Thus, IFP-4 and -8, which solely contain micropores, exhibit H4 (type I) isotherm shapes, while those of IFP-1, -2 and -5, which also contain mesopores, are of H3 (type IV) shape with three inflection points. The choice of the used linker substituents and transition metals employed in the framework has a tremendous effect on the material properties and functionality. The water uptake capacities of the examined IFPs are ranging 0.48 mmol g(-1) (IFP-4) to 6.99 mmol g(-1) (IFP-5) and comparable to those documented for ZIFs. The water vapor stability of IFPs is high, with the exception of IFP-8. KW - material characterization KW - water vapor KW - adsorption KW - hysteresis KW - Imidazolate Frameworks Potsdam Y1 - 2021 U6 - https://doi.org/10.3390/nano11061400 SN - 2079-4991 VL - 11 IS - 6 PB - MDPI CY - Basel ER - TY - JOUR A1 - Alrefai, Anas A1 - Mondal, Suvendu Sekhar A1 - Wruck, Alexander A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Brandt, Philipp A1 - Janiak, Christoph A1 - Schoenfeld, Sophie A1 - Weber, Birgit A1 - Rybakowski, Lawrence A1 - Herrman, Carmen A1 - Brennenstuhl, Katlen A1 - Eidner, Sascha A1 - Kumke, Michael Uwe A1 - Behrens, Karsten A1 - Günter, Christina A1 - Müller, Holger A1 - Holdt, Hans-Jürgen T1 - Hydrogen-bonded supramolecular metal-imidazolate frameworks: gas sorption, magnetic and UV/Vis spectroscopic properties JF - Journal of Inclusion Phenomena and Macrocyclic Chemistry N2 - By varying reaction parameters for the syntheses of the hydrogen-bonded metal-imidazolate frameworks (HIF) HIF-1 and HIF-2 (featuring 14 Zn and 14 Co atoms, respectively) to increase their yields and crystallinity, we found that HIF-1 is generated in two different frameworks, named as HIF-1a and HIF-1b. HIF-1b is isostructural to HIF-2. We determined the gas sorption and magnetic properties of HIF-2. In comparison to HIF-1a (Brunauer-Emmett-Teller (BET) surface area of 471m(2) g(-1)), HIF-2 possesses overall very low gas sorption uptake capacities [BET(CO2) surface area=85m(2) g(-1)]. Variable temperature magnetic susceptibility measurement of HIF-2 showed antiferromagnetic exchange interactions between the cobalt(II) high-spin centres at lower temperature. Theoretical analysis by density functional theory confirmed this finding. The UV/Vis-reflection spectra of HIF-1 (mixture of HIF-1a and b), HIF-2 and HIF-3 (with 14 Cd atoms) were measured and showed a characteristic absorption band centered at 340nm, which was indicative for differences in the imidazolate framework. KW - Gas-sorption KW - Ligand design KW - Magnetic properties KW - Supramolecular chemistry KW - Solvothermal synthesis Y1 - 2019 U6 - https://doi.org/10.1007/s10847-019-00926-6 SN - 1388-3127 SN - 1573-1111 VL - 94 IS - 3-4 SP - 155 EP - 165 PB - Springer CY - Dordrecht ER - TY - GEN A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ N2 - Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 190 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79953 SP - 4623 EP - 4631 ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ JF - Journal of materials chemistry : C, Materials for optical and electronic devices N2 - Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+. Y1 - 2015 U6 - https://doi.org/10.1039/C4TC02919D SN - 2050-7534 SN - 2050-7526 VL - 18 IS - 3 SP - 4623 EP - 4631 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ JF - Journal of materials chemistry : C, Materials for optical and electronic devices Y1 - 2015 U6 - https://doi.org/10.1039/c4tc02919d SN - 2050-7526 SN - 2050-7534 VL - 3 IS - 18 SP - 4623 EP - 4631 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Mondal, Suvendu Sekhar T1 - Design of isostructural metal-imidazolate frameworks : application for gas storage T1 - Synthese isostruktureller Metall-Imidazolat Frameworks : Anwendung für Gasspeicherung N2 - The sharply rising level of atmospheric carbon dioxide resulting from anthropogenic emissions is one of the greatest environmental concerns facing our civilization today. Metal-organic frameworks (MOFs) are a new class of materials that constructed by metal-containing nodes bonded to organic bridging ligands. MOFs could serve as an ideal platform for the development of next generation CO2 capture materials owing to their large capacity for the adsorption of gases and their structural and chemical tunability. The ability to rationally select the framework components is expected to allow the affinity of the internal pore surface toward CO2 to be precisely controlled, facilitating materials properties that are optimized for the specific type of CO2 capture to be performed (post-combustion capture, precombustion capture, or oxy-fuel combustion) and potentially even for the specific power plant in which the capture system is to be installed. For this reason, significant effort has been made in recent years in improving the gas separation performance of MOFs and some studies evaluating the prospects of deploying these materials in real-world CO2 capture systems have begun to emerge. We have developed six new MOFs, denoted as IFPs (IFP-5, -6, -7, -8, -9, -10, IFP = Imidazolate Framework Potsdam) and two hydrogen-bonded molecular building block (MBB, named as 1 and 2 for Zn and Co based, respectively) have been synthesized, characterized and applied for gas storage. The structure of IFP possesses 1D hexagonal channels. Metal centre and the substituent groups of C2 position of the linker protrude into the open channels and determine their accessible diameter. Interestingly, the channel diameters (range : 0.3 to 5.2 Å) for IFP structures are tuned by the metal centre (Zn, Co and Cd) and substituent of C2 position of the imidazolate linker. Moreover hydrogen bonded MBB of 1 and 2 is formed an in situ functionalization of a ligand under solvothermal condition. Two different types of channels are observed for 1 and 2. Materials contain solvent accessible void space. Solvent could be easily removed by under high vacuum. The porous framework has maintained the crystalline integrity even without solvent molecules. N2, H2, CO2 and CH4 gas sorption isotherms were performed. Gas uptake capacities are comparable with other frameworks. Gas uptake capacity is reduced when the channel diameter is narrow. For example, the channel diameter of IFP-5 (channel diameter: 3.8 Å) is slightly lower than that of IFP-1 (channel diameter: 4.2 Å); hence, the gas uptake capacity and Brunauer-Emmett-Teller (BET) surface area are slightly lower than IFP-1. The selectivity does not depend only on the size of the gas components (kinetic diameter: CO2 3.3 Å, N2 3.6 Å and CH4 3.8 ) but also on the polarizability of the surface and of the gas components. IFP-5 and-6 have the potential applications for the separation of CO2 and CH4 from N2-containing gas mixtures and CO2 and CH4 containing gas mixtures. Gas sorption isotherms of IFP-7, -8, -9, -10 exhibited hysteretic behavior due to flexible alkoxy (e.g., methoxy and ethoxy) substituents. Such phenomenon is a kind of gate effects which is rarely observed in microporous MOFs. IFP-7 (Zn-centred) has a flexible methoxy substituent. This is the first example where a flexible methoxy substituent shows the gate opening behavior in a MOF. Presence of methoxy functional group at the hexagonal channels, IFP-7 acted as molecular gate for N2 gas. Due to polar methoxy group and channel walls, wide hysteretic isotherm was observed during gas uptake. The N2 The estimated BET surface area for 1 is 471 m2 g-1 and the Langmuir surface area is 570 m2 g-1. However, such surface area is slightly higher than azolate-based hydrogen-bonded supramolecular assemblies and also comparable and higher than some hydrogen-bonded porous organic molecules. N2 - Metallorganische Gerüstverbindungen (MOFs) sind eine neue Klasse von porösen Koordinationspolymeren, die aus Metall-Knoten und verbrückenden Liganden bestehen. MOFs können Gasgemische trennen und Gase speichern. Aufgrund ihres modularen Aufbaus können die MOF-Eigenschaften systematisch variiert werden. Ein wichtiges Ziel für das Design von MOFs ist die Synthese von Materialien, die eine hohe selektive Aufnahmefähigkeit und -kapazität für Kohlenstoffdioxid besitzen. Im Rahmen der Arbeit ist es gelungen sechs neue MOFs (IFP-5, -6, -7, -8, -9 und -10) zu synthetisieren. Diese MOFs tragen die Kurzbezeichnung IFP. IFP steht als Abkürzung für Imidazolat-Framework-Potsdam (Imidazolat-basierte Gerüstverbindung Potsdam). In diesen IFPs wurde der Metallknoten (Zink, Cobalt, Cadmium) und der Brückenligand, ein 2-substituiertes Imidazolat-amid-imidat, in der Position variiert, um gute und selektive Sorptionseigenschaften für Kohlenstoffdioxid zu erzielen. Von den synthetisierten Verbindungen hat das IFP-5 die besten Sorptionseigenschaften für Kohlenstoffdioxid. Es konnte weiter gezeigt werden, dass sich die IFP-Struktur bei der Wahl von geeigneten Substituenten 2, wie z.B. Methoxy und Ethoxy auch für das Design von gate-opening (Tür-öffnenden) Effekten eignet. Diese Effekte können wiederum genutzt werden, um selektiv Gasmischungen zu trennen. Wenn man das 4,5-Dicyano-2-methoxy-imidazol in Gegenwart von Zink- und Cobalt-Salzen unter solvothermalen Bedingungen zur Reaktion bringt, erhält man beispiellose supramolekulare Wasserstoffbrückenbindungen zu einem dreidimensionalen Netzwerk, die mit Kanälen verknüpft sind. Diese Kanäle können von Lösungsmittelmolekülen (Wasser und Dimethylformamid) befreit werden und Gase aufnehmen. Insgesamt besteht nun die neue MOF-Klasse der Imidazolat-basierten IFPs aus Vertretern. Das Potential der 2-substituierten 4,5-Dicyanoimidazole ist nicht nur auf die Bildung von porösen Koordinationspolymeren beschränkt, sondern kann auch für die Synthese von bisher unbekannten supramolekularen Strukturen genutzt werden. KW - Metal-organic framework KW - Gas Sorption KW - Cobalt KW - Zinc KW - Ionic Liquid KW - metal-organic framework KW - gas sorption KW - cobalt KW - zinc KW - ionic liquid Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69692 ER - TY - GEN A1 - Mondal, Suvendu Sekhar A1 - Marquardt, Dorothea A1 - Janiak, Christoph A1 - Holdt, Hans-Jürgen T1 - Use of a 4,5-dicyanoimidazolate anion based ionic liquid for the synthesis of iron and silver nanoparticles N2 - Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N′-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of −22 to −71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 220 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89696 SP - 5476 EP - 5483 ER - TY - GEN A1 - Mondal, Suvendu Sekhar A1 - Dey, Subarna A1 - Baburin, Igor A. A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Seifert, Gotthard A1 - Janiak, Christoph A1 - Holdt, Hans-Jürgen T1 - Syntheses of two imidazolate-4-amide-5-imidate linker-based hexagonal metal–organic frameworks with flexible ethoxy substituent N2 - A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 234 KW - adsorption KW - behavior KW - carbon-dioxide KW - crystals KW - gases KW - ligand KW - pressure KW - selectivity KW - temperature KW - zinc Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94360 SP - 9394 EP - 9399 ER -