TY - JOUR A1 - Rauh, Hellgard A1 - Doerfel-Baasen, Dorothee A1 - Müller, Bernd T1 - Reaktionen junger Familien auf politisch-gesellschaftlichen Wandel Y1 - 1998 ER - TY - JOUR A1 - Ziegenhain, Ute A1 - Müller, Bernd A1 - Rauh, Hellgard T1 - Frühe Bindungserfahrungen und Verhaltensauffälligkeiten bei Kleinkindern in einer sozialen und kognitiven Anforderungssituation Y1 - 1996 ER - TY - JOUR A1 - Rauh, Hellgard A1 - Dillmann, Sigrid A1 - Müller, Bernd T1 - Anfänge der Persönlichkeitsentwicklung in der frühen Kindheit Y1 - 1995 ER - TY - JOUR A1 - Ziegenhain, Ute A1 - Rauh, Hellgard A1 - Müller, Bernd T1 - Emotionale Anpassung von Kleinkindern an die Krippenbetreuung Y1 - 1998 ER - TY - JOUR A1 - Schneider, Ingo A1 - Müller, Bernd A1 - Wilke, U.-B T1 - Saisonal variation of microorganisms in a sewage farm ares south of Berlin Y1 - 1993 ER - TY - JOUR A1 - Rauh, Hellgard A1 - Ziegenhain, Ute A1 - Müller, Bernd A1 - Wijnroks, Alexander T1 - Stability and change in infant-mother attachment in the second year of life : relations to parenting quality and varying degrees of daycare experience Y1 - 2000 SN - 0-521-58002-1 ER - TY - JOUR A1 - Tötzke, Christian A1 - Manke, Ingo A1 - Gaiselmann, Gerd A1 - Bohner, John A1 - Müller, Bernd R. A1 - Kupsch, Andreas A1 - Hentschel, Manfred P. A1 - Schmidt, Volker A1 - Banhart, Jens A1 - Lehnert, Werner T1 - A dedicated compression device for high resolution X-ray tomography of compressed gas diffusion layers JF - Review of scientific instruments : a monthly journal devoted to scientific instruments, apparatus, and techniques N2 - We present an experimental approach to study the three-dimensional microstructure of gas diffusion layer (GDL) materials under realistic compression conditions. A dedicated compression device was designed that allows for synchrotron-tomographic investigation of circular samples under well-defined compression conditions. The tomographic data provide the experimental basis for stochastic modeling of nonwoven GDL materials. A plain compression tool is used to study the fiber courses in the material at different compression stages. Transport relevant geometrical parameters, such as porosity, pore size, and tortuosity distributions, are exemplarily evaluated for a GDL sample in the uncompressed state and for a compression of 30 vol.%. To mimic the geometry of the flow-field, we employed a compression punch with an integrated channel-rib-profile. It turned out that the GDL material is homogeneously compressed under the ribs, however, much less compressed underneath the channel. GDL fibers extend far into the channel volume where they might interfere with the convective gas transport and the removal of liquid water from the cell. (C) 2015 AIP Publishing LLC. Y1 - 2015 U6 - https://doi.org/10.1063/1.4918291 SN - 0034-6748 SN - 1089-7623 VL - 86 IS - 4 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Shashev, Yury A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Evsevleev, Sergei A1 - Müller, Bernd R. A1 - Osenberg, Markus A1 - Manke, Ingo A1 - Hentschel, Manfred P. A1 - Bruno, Giovanni T1 - Optimizing the visibility of X-ray phase grating interferometry JF - Materials testing : Materialprüfung ; materials and components, technology and application N2 - The performance of grating interferometers coming up now for imaging interfaces within materials depends on the efficiency (visibility) of their main component, namely the phase grating. Therefore, experiments with monochromatic synchrotron radiation and corresponding simulations are carried out. The visibility of a phase grating is optimized by different photon energies, varying detector to grating distances and continuous rotation of the phase grating about the grid lines. Such kind of rotation changes the projected grating shapes, and thereby the distribution profiles of phase shifts. This yields higher visibilities than derived from ideal rectangular shapes. By continuous grating rotation and variation of the propagation distance, we achieve 2D visibility maps. Such maps provide the visibility for a certain combination of grating orientation and detector position. Optimum visibilities occur at considerably smaller distances than in the standard setup. KW - X-ray imaging KW - grating interferometry KW - Talbot-Lau interferometer KW - X-ray refraction KW - X-ray phase contrast Y1 - 2017 U6 - https://doi.org/10.3139/120.111097 SN - 0025-5300 VL - 59 SP - 974 EP - 980 PB - Hanser CY - München ER - TY - JOUR A1 - Chen, Cong A1 - Müller, Bernd R. A1 - Prinz, Carsten A1 - Stroh, Julia A1 - Feldmann, Ines A1 - Bruno, Giovanni T1 - The correlation between porosity characteristics and the crystallographic texture in extruded stabilized aluminium titanate for diesel particulate filter applications JF - Journal of the European Ceramic Society N2 - Porous ceramic diesel particulate filters (DPFs) are extruded products that possess macroscopic anisotropic mechanical and thermal properties. This anisotropy is caused by both morphological features (mostly the orientation of porosity) and crystallographic texture. We systematically studied those two aspects in two aluminum titanate ceramic materials of different porosity using mercury porosimetry, gas adsorption, electron microscopy, X-ray diffraction, and X-ray refraction radiography. We found that a lower porosity content implies a larger isotropy of both the crystal texture and the porosity orientation. We also found that, analogous to cordierite, crystallites do align with their axis of negative thermal expansion along the extrusion direction. However, unlike what found for cordierite, the aluminium titanate crystallite form is such that a more pronounced (0 0 2) texture along the extrusion direction implies porosity aligned perpendicular to it. KW - preferred orientation KW - X-ray refraction KW - pore orientation KW - crystal KW - structure KW - extrusion KW - microstructure-property relations Y1 - 2020 U6 - https://doi.org/10.1016/j.jeurceramsoc.2019.11.076 SN - 0955-2219 SN - 1873-619X VL - 40 IS - 4 SP - 1592 EP - 1601 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Erdmann, Maren A1 - Kupsch, Andreas A1 - Müller, Bernd Randolf A1 - Hentschel, Manfred P. A1 - Niebergall, Ute A1 - Böhning, Martin A1 - Bruno, Giovanni T1 - Diesel-induced transparency of plastically deformed high-density polyethylene JF - Journal of materials science N2 - High-density polyethylene becomes optically transparent during tensile drawing when previously saturated with diesel fuel. This unusual phenomenon is investigated as it might allow conclusions with respect to the material behavior. Microscopy, differential scanning calorimetry, density measurements are applied together with two scanning X-ray scattering techniques: wide angle X-ray scattering (WAXS) and X-ray refraction, able to extract the spatially resolved crystal orientation and internal surface, respectively. The sorbed diesel softens the material and significantly alters the yielding characteristics. Although the crystallinity among stretched regions is similar, a virgin reference sample exhibits strain whitening during stretching, while the diesel-saturated sample becomes transparent. The WAXS results reveal a pronounced fiber texture in the tensile direction in the stretched region and an isotropic orientation in the unstretched region. This texture implies the formation of fibrils in the stretched region, while spherulites remain intact in the unstretched parts of the specimens. X-ray refraction reveals a preferred orientation of internal surfaces along the tensile direction in the stretched region of virgin samples, while the sample stretched in the diesel-saturated state shows no internal surfaces at all. Besides from stretching saturated samples, optical transparency is also obtained from sorbing samples in diesel after stretching. Y1 - 2019 U6 - https://doi.org/10.1007/s10853-019-03700-8 SN - 0022-2461 SN - 1573-4803 VL - 54 IS - 17 SP - 11739 EP - 11755 PB - Springer CY - New York ER - TY - JOUR A1 - Laquai, Rene A1 - Müller, Bernd R. A1 - Schneider, Judith Ann A1 - Kupsch, Andreas A1 - Bruno, Giovanni T1 - Using SXRR to probe the nature of discontinuities in SLM additive manufactured inconel 718 specimens JF - Metallurgical and Materials Transactions A N2 - The utilization of additive manufacturing (AM) to fabricate robust structural components relies on understanding the nature of internal anomalies or discontinuities, which can compromise the structural integrity. While some discontinuities in AM microstructures stem from similar mechanisms as observed in more traditional processes such as casting, others are unique to the AM process. Discontinuities in AM are challenging to detect, due to their submicron size and orientation dependency. Toward the goal of improving structural integrity, minimizing discontinuities in an AM build requires an understanding of the mechanisms of formation to mitigate their occurrence. This study utilizes various techniques to evaluate the shape, size, nature and distribution of discontinuities in AM Inconel 718, in a non-hot isostatic pressed (HIPed) as-built, non-HIPed and direct age, and HIPed with two step age samples. Non-destructive synchrotron radiation refraction and transmission radiography (SXRR) provides additional information beyond that obtained with destructive optical microscopy. SXRR was able to distinguish between voids, cracks and lack of melt in, due to its sensitivity to the orientation of the discontinuity. Y1 - 2020 U6 - https://doi.org/10.1007/s11661-020-05847-5 SN - 1073-5623 SN - 1543-1940 VL - 51 IS - 8 SP - 4146 EP - 4157 PB - Springer CY - New York ER - TY - JOUR A1 - Shashev, Yury A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Müller, Bernd R. A1 - Bruno, Giovanni T1 - Improving the visibility of phase gratings for Talbot-Lau X-ray imaging JF - Materials testing : Materialprüfung ; materials and components, technology and application N2 - Talbot-Lau interferometry provides X-ray imaging techniques with significant enhancement of the radiographic contrast of weakly absorbing objects. The grating based technique allows separation of absorption, refraction and small angle scattering effects. The different efficiency of rectangular and triangular shaped phase gratings at varying detector distances is investigated. The interference patterns (Talbot carpets) are modeled for parallel monochromatic radiation and measured by synchrotron radiation. In comparison to rectangular shapes of phase gratings much higher visibility is obtained for triangular shapes which yield enhanced contrast of a glass capillary test specimen. KW - Talbot-Lau interferometry KW - phase grating KW - synchrotron imaging KW - visibility KW - X-ray refraction Y1 - 2016 U6 - https://doi.org/10.3139/120.110948 SN - 0025-5300 VL - 58 SP - 970 EP - 974 PB - Hanser CY - München ER - TY - JOUR A1 - Laquai, Rene A1 - Gouraud, Fanny A1 - Müller, Bernd Randolf A1 - Huger, Marc A1 - Chotard, Thierry A1 - Antou, Guy A1 - Bruno, Giovanni T1 - Evolution of Thermal Microcracking in Refractory ZrO2-SiO2 after Application of External Loads at High Temperatures JF - Materials N2 - Zirconia-based cast refractories are widely used for glass furnace applications. Since they have to withstand harsh chemical as well as thermo-mechanical environments, internal stresses and microcracking are often present in such materials under operating conditions (sometimes in excess of 1700 °C). We studied the evolution of thermal (CTE) and mechanical (Young’s modulus) properties as a function of temperature in a fused-cast refractory containing 94 wt.% of monoclinic ZrO2 and 6 wt.% of a silicate glassy phase. With the aid of X-ray refraction techniques (yielding the internal specific surface in materials), we also monitored the evolution of microcracking as a function of thermal cycles (crossing the martensitic phase transformation around 1000 °C) under externally applied stress. We found that external compressive stress leads to a strong decrease of the internal surface per unit volume, but a tensile load has a similar (though not so strong) effect. In agreement with existing literature on β-eucryptite microcracked ceramics, we could explain these phenomena by microcrack closure in the load direction in the compression case, and by microcrack propagation (rather than microcrack nucleation) under tensile conditions. KW - electro-fused zirconia KW - microcracking KW - synchrotron x-ray refraction radiography (SXRR) KW - thermal expansion Y1 - 2019 U6 - https://doi.org/10.3390/ma12071017 SN - 1996-1944 VL - 12 IS - 7 PB - MDPI CY - Basel ER - TY - JOUR A1 - Chen, Cong A1 - Müller, Bernd Randolf A1 - Lebedev, Oleg I. A1 - Giovannelli, Fabien A1 - Bruno, Giovanni A1 - Delorme, Fabian T1 - Effects of impurities on the stability of the low thermal conductivity in Fe2TiO5 ceramics JF - Materials characterization N2 - The stability of the low thermal conductivity in Fe2TiO5 pseudobrookite ceramics has been studied. An increase in thermal diffusivity is observed after only three cycles of measurement. X-ray refraction shows an increase in the mean value of specific surface after the thermal diffusivity measurements. By using scanning electron microscopy and high-angle annular dark-field scanning transmission electron microscope equipped with energy dispersive Xray spectroscopy, we observe a segregation of Ca- and F-rich nanocrystals at grain boundaries after three cycles of thermal diffusivity measurement. Therefore, impurities seem to be more efficient to scatter phonons as point defects in the pseudobrookite lattice rather than as nanocrystals at pseudobrookite grain boundaries. This emphasizes the importance of precursor purity and the influence of redistribution of impurities on thermoelectric properties: stability of micro-/nano-structures is a key point, and repeated thermoelectric measurements may allow detecting such metastable micro-/nano-structures and producing stable and reliable data. KW - Fe2TiO5 KW - Impurity segregation KW - Thermoclectrics KW - X-ray refraction KW - Scanning transmission electron microscopy KW - Thermal conductivity Y1 - 2019 U6 - https://doi.org/10.1016/j.matchar.2019.01.021 SN - 1044-5803 SN - 1873-4189 VL - 149 SP - 111 EP - 117 PB - Elsevier CY - New York ER - TY - GEN A1 - Müller, Bernd Randolf A1 - Kupsch, Andreas A1 - Laquai, Rene A1 - Nellesen, Jens A1 - Tillmann, Wolfgang A1 - Kasperovich, Galina A1 - Bruno, Giovanni T1 - Microstructure Characterisation of Advanced Materials via 2D and 3D X-Ray Refraction Techniques T2 - Materials Science Forum N2 - 3D imaging techniques have an enormous potential to understand the microstructure, its evolution, and its link to mechanical, thermal, and transport properties. In this conference paper we report the use of a powerful, yet not so wide-spread, set of X-ray techniques based on refraction effects. X-ray refraction allows determining internal specific surface (surface per unit volume) in a non-destructive fashion, position and orientation sensitive, and with a nanometric detectability. We demonstrate showcases of ceramics and composite materials, where microstructural parameters could be achieved in a way unrivalled even by high-resolution techniques such as electron microscopy or computed tomography. We present in situ analysis of the damage evolution in an Al/Al2O3 metal matrix composite during tensile load and the identification of void formation (different kinds of defects, particularly unsintered powder hidden in pores, and small inhomogeneity’s like cracks) in Ti64 parts produced by selective laser melting using synchrotron X-ray refraction radiography and tomography. KW - X-ray refraction KW - radiography KW - tomography KW - synchrotron X-ray refraction radiography KW - CT KW - microscopy KW - creep KW - porosity KW - damage evolution KW - additive manufacturing KW - metal matrix composite Y1 - 2018 SN - 978-3-0357-1208-7 U6 - https://doi.org/10.4028/www.scientific.net/MSF.941.2401 SN - 0255-5476 VL - 941 SP - 2401 EP - 2406 PB - Trans Tech Publications Ltd CY - Zurich ER - TY - JOUR A1 - Cabeza, Sandra A1 - Müller, Bernd R. A1 - Pereyra, Ricio A1 - Fernandez, Ricardo A1 - Gonzalez-Doncel, Gaspar A1 - Bruno, Giovanni T1 - Evidence of damage evolution during creep of Al-Mg alloy using synchrotron X-ray refraction JF - Journal of applied crystallography N2 - In order to provide further evidence of damage mechanisms predicted by the recent solid-state transformation creep (SSTC) model, direct observation of damage accumulation during creep of Al-3.85Mg was made using synchrotron X-ray refraction. X-ray refraction techniques detect the internal specific surface (i.e. surface per unit volume) on a length scale comparable to the specimen size, but with microscopic sensitivity. A significant rise in the internal specific surface with increasing creep time was observed, providing evidence for the creation of a fine grain substructure, as predicted by the SSTC model. This substructure was also observed by scanning electron microscopy. KW - aluminium alloys KW - creep KW - damage KW - synchrotron X-ray refraction KW - electron microscopy KW - subgrain structure Y1 - 2018 U6 - https://doi.org/10.1107/S1600576718001449 SN - 1600-5767 VL - 51 SP - 420 EP - 427 PB - International Union of Crystallography CY - Chester ER - TY - JOUR A1 - Laquai, René A1 - Schaupp, Thomas A1 - Griesche, Axel A1 - Müller, Bernd R. A1 - Kupsch, Andreas A1 - Hannemann, Andreas A1 - Kannengiesser, Thomas A1 - Bruno, Giovanni T1 - Quantitative analysis of hydrogen-assisted microcracking in duplex stainless steel through X-ray refraction 3D imaging JF - Advanced engineering materials N2 - While the problem of the identification of mechanisms of hydrogen-assisted damage has and is being thoroughly studied, the quantitative analysis of such damage still lacks suitable tools. In fact, while, for instance, electron microscopy yields excellent characterization, the quantitative analysis of damage requires at the same time large field-of-views and high spatial resolution. Synchrotron X-ray refraction techniques do possess both features. Herein, it is shown how synchrotron X-ray refraction computed tomography (SXRCT) can quantify damage induced by hydrogen embrittlement in a lean duplex steel, yielding results that overperform even those achievable by synchrotron X-ray absorption computed tomography. As already reported in the literature, but this time using a nondestructive technique, it is shown that the hydrogen charge does not penetrate to the center of tensile specimens. By the comparison between virgin and hydrogen-charged specimens, it is deduced that cracks in the specimen bulk are due to the rolling process rather than hydrogen-assisted. It is shown that (micro)cracks propagate from the surface of tensile specimens to the interior with increasing applied strain, and it is deduced that a significant crack propagation can only be observed short before rupture. KW - 2101 duplex stainless steel KW - computed tomography KW - fractography KW - hydrogen KW - embrittlement KW - microcracking KW - synchrotron radiation KW - X-ray refraction Y1 - 2022 U6 - https://doi.org/10.1002/adem.202101287 SN - 1527-2648 VL - 24 IS - 6 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Mani, Deepak A1 - Kupsch, Andreas A1 - Müller, Bernd R. A1 - Bruno, Giovanni T1 - Diffraction Enhanced Imaging Analysis with Pseudo-Voigt Fit Function JF - Journal of imaging : open access journal N2 - Diffraction enhanced imaging (DEI) is an advanced digital radiographic imaging technique employing the refraction of X-rays to contrast internal interfaces. This study aims to qualitatively and quantitatively evaluate images acquired using this technique and to assess how different fitting functions to the typical rocking curves (RCs) influence the quality of the images. RCs are obtained for every image pixel. This allows the separate determination of the absorption and the refraction properties of the material in a position-sensitive manner. Comparison of various types of fitting functions reveals that the Pseudo-Voigt (PsdV) function is best suited to fit typical RCs. A robust algorithm was developed in the Python programming language, which reliably extracts the physically meaningful information from each pixel of the image. We demonstrate the potential of the algorithm with two specimens: a silicone gel specimen that has well-defined interfaces, and an additively manufactured polycarbonate specimen. KW - diffraction enhanced imaging KW - analyzer-based imaging KW - X-ray refraction; KW - non-destructive evaluation KW - Pseudo-Voigt fit function KW - Python Y1 - 2022 U6 - https://doi.org/10.3390/jimaging8080206 SN - 2313-433X VL - 8 IS - 8 PB - MDPI CY - Basel ER -