TY - BOOK A1 - Calmez, Conrad A1 - Hesse, Hubert A1 - Siegmund, Benjamin A1 - Stamm, Sebastian A1 - Thomschke, Astrid A1 - Hirschfeld, Robert A1 - Ingalls, Dan A1 - Lincke, Jens T1 - Explorative authoring of Active Web content in a mobile environment N2 - Developing rich Web applications can be a complex job - especially when it comes to mobile device support. Web-based environments such as Lively Webwerkstatt can help developers implement such applications by making the development process more direct and interactive. Further the process of developing software is collaborative which creates the need that the development environment offers collaboration facilities. This report describes extensions of the webbased development environment Lively Webwerkstatt such that it can be used in a mobile environment. The extensions are collaboration mechanisms, user interface adaptations but as well event processing and performance measuring on mobile devices. N2 - Vielseitige Webanwendungen zu entwickeln kann eine komplexe Aufgabe sein - besonders wenn es die Unterstützung mobiler Geräte betrifft. Webbasierte Umgebungen wie Lively Kernel können Entwicklern helfen Webanwendungen zu entwickeln, indem sie den Entwicklungsprozess direkter und interaktiver gestalten. Zudem sind Entwicklungsprozesse von Software kollaborativ, d.h. Enwicklungsumgebungen müssen so gestaltet sein, dass sie mit kollaborativen Elementen zu unterstützen. Diese Arbeit beschreibt die Erweiterungen der webbasierten Entwicklungsumgebung Lively Webwerkstatt, so dass diese in einer mobilen Umgebung genutzt werden kann. Die Reichweite dieser Erweiterungen erstreckt sich von Kollaborationsmechanismen und Benutzerschnittstellen bis hin zu Eventbehandlung und Performanzmessungen auf mobilen Geräten. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 72 KW - Web applications KW - Mobile Application Development KW - CSCW KW - Lively Kernel Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64054 SN - 978-3-86956-232-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Lincke, Jens A1 - Appeltauer, Malte A1 - Steinert, Bastian A1 - Hirschfeld, Robert T1 - An open implementation for context-oriented layer composition in ContextJS JF - Science of computer programming N2 - Context-oriented programming (COP) provides dedicated support for defining and composing variations to a basic program behavior. A variation, which is defined within a layer, can be de-/activated for the dynamic extent of a code block. While this mechanism allows for control flow-specific scoping, expressing behavior adaptations can demand alternative scopes. For instance, adaptations can depend on dynamic object structure rather than control flow. We present scenarios for behavior adaptation and identify the need for new scoping mechanisms. The increasing number of scoping mechanisms calls for new language abstractions representing them. We suggest to open the implementation of scoping mechanisms so that developers can extend the COP language core according to their specific needs. Our open implementation moves layer composition into objects to be affected and with that closer to the method dispatch to be changed. We discuss the implementation of established COP scoping mechanisms using our approach and present new scoping mechanisms developed for our enhancements to Lively Kernel. KW - ContextJS KW - Context-oriented programming KW - Open implementations KW - Dynamic adaptation KW - Scope Y1 - 2011 U6 - https://doi.org/10.1016/j.scico.2010.11.013 SN - 0167-6423 VL - 76 IS - 12 SP - 1194 EP - 1209 PB - Elsevier CY - Amsterdam ER - TY - BOOK A1 - Herbst, Eva‐Maria A1 - Maschler, Fabian A1 - Niephaus, Fabio A1 - Reimann, Max A1 - Steier, Julia A1 - Felgentreff, Tim A1 - Lincke, Jens A1 - Taeumel, Marcel A1 - Hirschfeld, Robert A1 - Witt, Carsten T1 - ecoControl T1 - ecoControl BT - Entwurf und Implementierung einer Software zur Optimierung heterogener Energiesysteme in Mehrfamilienhäusern BT - design and implementation of a prototype for optimizing heterogeneous energy systems in multi‐family residential buildings N2 - Eine dezentrale Energieversorgung ist ein erster Schritt in Richtung Energiewende. Dabei werden auch in Mehrfamilienhäusern vermehrt verschiedene Strom- und Wärmeerzeuger eingesetzt. Besonders in Deutschland kommen in diesem Zusammenhang Blockheizkraftwerke immer häufiger zum Einsatz, weil sie Gas sehr effizient in Strom und Wärme umwandeln können. Außerdem ermöglichen sie, im Zusammenspiel mit anderen Energiesystemen wie beispielsweise Photovoltaik-Anlagen, eine kontinuierliche und dezentrale Energieversorgung. Bei dem Betrieb von unterschiedlichen Energiesystemen ist es wünschenswert, dass die Systeme aufeinander abgestimmt arbeiten. Allerdings ist es bisher schwierig, heterogene Energiesysteme effizient miteinander zu betreiben. Dadurch bleiben Einsparungspotentiale ungenutzt. Eine zentrale Steuerung kann deshalb die Effizienz des Gesamtsystems verbessern. Mit ecoControl stellen wir einen erweiterbaren Prototypen vor, der die Kooperation von Energiesystemen optimiert und Umweltfaktoren miteinbezieht. Dazu stellt die Software eine einheitliche Bedienungsoberfläche zur Konfiguration aller Systeme zur Verfügung. Außerdem bietet sie die Möglichkeit, Optimierungsalgorithmen mit Hilfe einer Programmierschnittstelle zu entwickeln, zu testen und auszuführen. Innerhalb solcher Algorithmen können von ecoControl bereitgestellte Vorhersagen genutzt werden. Diese Vorhersagen basieren auf dem individuellen Verhalten von jedem Energiesystem, Wettervorhersagen und auf Prognosen des Energieverbrauchs. Mithilfe einer Simulation können Techniker unterschiedliche Konfigurationen und Optimierungen sofort ausprobieren, ohne diese über einen langen Zeitraum an realen Geräten testen zu müssen. ecoControl hilft darüber hinaus auch Hausverwaltungen und Vermietern bei der Verwaltung und Analyse der Energiekosten. Wir haben anhand von Fallbeispielen gezeigt, dass Optimierungsalgorithmen, welche die Nutzung von Wärmespeichern verbessern, die Effizienz des Gesamtsystems erheblich verbessern können. Schließlich kommen wir zu dem Schluss, dass ecoControl in einem nächsten Schritt unter echten Bedingungen getestet werden muss, sobald eine geeignete Hardwarekomponente verfügbar ist. Über diese Schnittstelle werden die Messwerte an ecoControl gesendet und Steuersignale an die Geräte weitergeleitet. N2 - The energy turnaround in Germany affects not only big industries but also smaller advocates who are interested in cost-efficient and regenerative energy supply. The observable signs of decentralized supply indicate that many individuals are eager to employ affordable energy devices, such as solar power systems, by themselves. Owners or managers of multi-family residential buildings, for example, install heterogeneous sets of devices that have to satisfy the varying demands of tenants. These devices are primarily influenced by environmental factors such as the weather. Independently, on-site cogeneration units are increasingly used to produce both electrical and thermal energy in a dependable and decentralized way. While having an arguably good efficiency on their own, such energy systems, however, are not built to cooperate in an heterogeneous installation. Hence they can negatively affect overall costs or impair the optimal ecological energy usage. We propose a centralized, extensible control platform that supports low-effort integration and efficient cooperation of heterogeneous energy production and storage units. Our prototype ecoControl shows that such a software system can be used to optimize the communication protocol of energy devices in multi-family residential buildings. In addition a simulation of the devices and forecasts of both energy supply and demand facilitate an advanced configuration of the system to enable an optimal drive. An intuitive user interface supports technicians, managers or owners to monitor and adjust the operation of installed devices to accommodate given conditions - even if not anticipated by the manufacturer. In several example cases, we illustrate how optimization algorithms can improve the use of heat storages to increase overall efficiency by a significant factor. Although further investigations with representative settings are needed, we argue that ecoControl can contribute to Germany's energy turnaround by projecting a novel perspective on the application of interdependent energy production and storage units. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 93 KW - Energiesparen KW - Prognosen KW - Effizienz KW - Optimierungen KW - Algorithmen KW - Blockheizkraftwerke KW - Mehrfamilienhäuser KW - energy savings KW - forecasts KW - efficiency KW - optimizations KW - algorithms KW - cogeneration units KW - multi-­family residential buildings Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-72147 SN - 978-3-86956-318-3 SN - 1613-5652 SN - 2191-1665 IS - 93 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Otto, Philipp A1 - Pollak, Jaqueline A1 - Werner, Daniel A1 - Wolff, Felix A1 - Steinert, Bastian A1 - Thamsen, Lauritz A1 - Taeumel, Marcel A1 - Lincke, Jens A1 - Krahn, Robert A1 - Ingalls, Daniel H. H. A1 - Hirschfeld, Robert T1 - Exploratives Erstellen von interaktiven Inhalten in einer dynamischen Umgebung​ T1 - Exploratory authoring of interactive content in a live environment N2 - Bei der Erstellung von Visualisierungen gibt es im Wesentlichen zwei Ansätze. Zum einen können mit geringem Aufwand schnell Standarddiagramme erstellt werden. Zum anderen gibt es die Möglichkeit, individuelle und interaktive Visualisierungen zu programmieren. Dies ist jedoch mit einem deutlich höheren Aufwand verbunden. Flower ermöglicht eine schnelle Erstellung individueller und interaktiver Visualisierungen, indem es den Entwicklungssprozess stark vereinfacht und die Nutzer bei den einzelnen Aktivitäten wie dem Import und der Aufbereitung von Daten, deren Abbildung auf visuelle Elemente sowie der Integration von Interaktivität direkt unterstützt. N2 - To create visualizations for studying or conveying the meaning of data, users can usually choose between two options: 1) generating standard diagrams with low effort such as bar charts or scatter plots or 2) constructing individual, interactive, domain-specific visualizations at great expense. This report presents the concepts and implementation of Flower, an approach to simplify the process of creating individual and interactive visualizations. Flower supports users users carrying out the following activities directly and interactively: (i) import and transformation of data, (ii) creation of visual mappings, and (iii) provisioning of interactivity. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 101 KW - Visualisierung KW - Skript-Entwicklungsumgebungen KW - Werkzeuge KW - Lively Kernel KW - visualization KW - scripting environments KW - tools KW - lively kernel Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-83806 SN - 978-3-86956-346-6 SN - 1613-5652 SN - 2191-1665 IS - 101 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Weyand, Christopher A1 - Chromik, Jonas A1 - Wolf, Lennard A1 - Kötte, Steffen A1 - Haase, Konstantin A1 - Felgentreff, Tim A1 - Lincke, Jens A1 - Hirschfeld, Robert T1 - Improving hosted continuous integration services T1 - Verbesserung gehosteter Dienste für kontinuierliche Integration N2 - Developing large software projects is a complicated task and can be demanding for developers. Continuous integration is common practice for reducing complexity. By integrating and testing changes often, changesets are kept small and therefore easily comprehensible. Travis CI is a service that offers continuous integration and continuous deployment in the cloud. Software projects are build, tested, and deployed using the Travis CI infrastructure without interrupting the development process. This report describes how Travis CI works, presents how time-driven, periodic building is implemented as well as how CI data visualization can be done, and proposes a way of dealing with dependency problems. N2 - Große Softwareprojekte zu entwickeln, ist eine komplizierte Aufgabe und fordernd für Entwickler. Kontinuierliche Integration ist eine geläufige Praxis zur Komplexitätsreduktion. Durch häufiges Integrieren und Testen werden Änderungen klein gehalten und sind daher übersichtlich. Travis CI ist ein Dienst, der kontinuierliche Integration und kontinuierliche Bereitstellung in der Cloud anbietet. Softwareprojekte werden auf der Travis CI Infrastruktur gebaut, getestet und bereitgestellt, ohne dass der Entwicklungsprozess unterbrochen wird. Dieser Bericht beschreibt, die Travis CI funktioniert, zeigt wie zeitgesteuertes, periodisches Bauen implentiert wurde, wie CI-Daten visualisiert werden können und schlägt ein Verfahren vor mit dem Abhängigkeitsprobleme gelöst werden können. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 108 KW - Travis CI KW - continuous integration KW - continuous testing KW - software tests KW - software architecture KW - periodic tasks KW - dependencies KW - visualization KW - Travis CI KW - kontinuierliche Integration KW - kontinuierliches Testen KW - Softwaretests KW - Softwarearchitektur KW - periodische Aufgaben KW - Abhängigkeiten KW - Visualisierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94251 SN - 978-3-86956-377-0 SN - 1613-5652 SN - 2191-1665 IS - 108 PB - Universitätsverlag Potsdam CY - Potsdam ER -