TY - JOUR A1 - Belova, Valentina A1 - Shchukin, Dmitry G. A1 - Gorin, Dmitry A. A1 - Kopyshev, Alexey A1 - Moehwald, Helmuth T1 - A new approach to nucleation of cavitation bubbles at chemically modified surfaces JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Cavitation at the solid surface normally begins with nucleation, in which defects or assembled molecules located at a liquid-solid interface act as nucleation centers and are actively involved in the evolution of cavitation bubbles. Here, we propose a simple approach to evaluate the behavior of cavitation bubbles formed under high intensity ultrasound (20 kHz, 51.3 W cm (2)) at solid surfaces, based on sonication of patterned substrates with a small roughness (less than 3 nm) and controllable surface energy. A mixture of octadecylphosphonic acid (ODTA) and octadecanethiol (ODT) was stamped on the Si wafer coated with different thicknesses of an aluminium layer (20-500 nm). We investigated the growth mechanism of cavitation bubble nuclei and the evolution of individual pits (defects) formed under sonication on the modified surface. A new activation behavior as a function of Al thickness, sonication time, ultrasonic power and temperature is reported. In this process cooperativity is introduced, as initially formed pits further reduce the energy to form bubbles. Furthermore, cavitation on the patterns is a controllable process, where up to 40-50 min of sonication time only the hydrophobic areas are active nucleation sites. This study provides a convincing proof of our theoretical approach on nucleation. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp20218a SN - 1463-9076 VL - 13 IS - 17 SP - 8015 EP - 8023 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mai, Tobias A1 - Wolski, Karol A1 - Puciul-Malinowska, Agnieszka A1 - Kopyshev, Alexey A1 - Gräf, Ralph A1 - Bruns, Michael A1 - Zapotoczny, Szczepan A1 - Taubert, Andreas T1 - Anionic polymer brushes for biomimetic calcium phosphate mineralization BT - A surface with application potential in biomaterials JF - Polymers N2 - This article describes the synthesis of anionic polymer brushes and their mineralization with calcium phosphate. The brushes are based on poly(3-sulfopropyl methacrylate potassium salt) providing a highly charged polymer brush surface. Homogeneous brushes with reproducible thicknesses are obtained via surface-initiated atom transfer radical polymerization. Mineralization with doubly concentrated simulated body fluid yields polymer/inorganic hybrid films containing AB-Type carbonated hydroxyapatite (CHAP), a material resembling the inorganic component of bone. Moreover, growth experiments using Dictyostelium discoideum amoebae demonstrate that the mineral-free and the mineral-containing polymer brushes have a good biocompatibility suggesting their use as biocompatible surfaces in implantology or related fields. KW - polymer brushes KW - calcium phosphate KW - hydroxyapatite KW - carbonated apatite KW - bone mimic KW - biocompatibility KW - Dictyostelium discoideum Y1 - 2018 U6 - https://doi.org/10.3390/polym10101165 SN - 2073-4360 VL - 10 IS - 10 PB - MDPI CY - Basel ER - TY - GEN A1 - Schué, Emmanuelle A1 - Kopyshev, Alexey A1 - Lutz, Jean-François A1 - Börner, Hans G. T1 - Molecular bottle brushes with positioned selenols BT - Extending the toolbox of oxidative single polymer chain folding with conformation analysis by atomic force microscopy T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - A synthesis route to controlled and dynamic single polymer chain folding is reported. Sequence-controlled macromolecules containing precisely located selenol moieties within a polymer chain are synthesized. Oxidation of selenol functionalities lead to diselenide bridges and induces controlled intramolecular crosslinking to generate single chain collapse. The cyclization process is successfully characterized by SEC as well as by H-1 NMR and 2D HSQC NMR spectroscopies. In order to gain insight on the molecular level to reveal the degree of structural control, the folded polymers are transformed into folded molecular brushes that are known to be visualizable as single molecule structures by AFM. The "grafting onto" approach is performed by using triazolinedione-diene reaction to graft the side chain polymers. A series of folded molecular brushes as well as the corresponding linear controls are synthesized. AFM visualization is proving the cyclization of the folded backbone by showing globular objects, where non-folded brushes show typical worm-like structures. (C) 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1397 KW - atomic force microscopy (AFM) KW - diselenide KW - grafted polymers KW - molecular bottle brushes KW - sequence-controlled polymers KW - single chain folding Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-516184 SN - 1866-8372 IS - 1 SP - 154 EP - 162 ER - TY - JOUR A1 - Schué, Emmanuelle A1 - Kopyshev, Alexey A1 - Lutz, Jean-François A1 - Börner, Hans G. T1 - Molecular bottle brushes with positioned selenols BT - Extending the toolbox of oxidative single polymer chain folding with conformation analysis by atomic force microscopy JF - Journal of Polymer Science N2 - A synthesis route to controlled and dynamic single polymer chain folding is reported. Sequence-controlled macromolecules containing precisely located selenol moieties within a polymer chain are synthesized. Oxidation of selenol functionalities lead to diselenide bridges and induces controlled intramolecular crosslinking to generate single chain collapse. The cyclization process is successfully characterized by SEC as well as by H-1 NMR and 2D HSQC NMR spectroscopies. In order to gain insight on the molecular level to reveal the degree of structural control, the folded polymers are transformed into folded molecular brushes that are known to be visualizable as single molecule structures by AFM. The "grafting onto" approach is performed by using triazolinedione-diene reaction to graft the side chain polymers. A series of folded molecular brushes as well as the corresponding linear controls are synthesized. AFM visualization is proving the cyclization of the folded backbone by showing globular objects, where non-folded brushes show typical worm-like structures. (C) 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. KW - atomic force microscopy (AFM) KW - diselenide KW - grafted polymers KW - molecular bottle brushes KW - sequence-controlled polymers KW - single chain folding Y1 - 2020 U6 - https://doi.org/10.1002/pola.29496 SN - 2642-4169 VL - 58 IS - 1 SP - 154 EP - 162 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Bekir, Marek A1 - Jelken, Joachim A1 - Jung, Se-Hyeong A1 - Pich, Andrij A1 - Pacholski, Claudia A1 - Kopyshev, Alexey A1 - Santer, Svetlana T1 - Dual responsiveness of microgels induced by single light stimulus JF - Applied physics letters N2 - We report on the multiple response of microgels triggered by a single optical stimulus. Under irradiation, the volume of the microgels is reversibly switched by more than 20 times. The irradiation initiates two different processes: photo-isomerization of the photo-sensitive surfactant, which forms a complex with the anionic microgel, rendering it photo-responsive; and local heating due to a thermo-plasmonic effect within the structured gold layer on which the microgel is deposited. The photo-responsivity is related to the reversible accommodation/release of the photo-sensitive surfactant depending on its photo-isomerization state, while the thermo-sensitivity is intrinsically built in. We show that under exposure to green light, the thermo-plasmonic effect generates a local hot spot in the gold layer, resulting in the shrinkage of the microgel. This process competes with the simultaneous photo-induced swelling. Depending on the position of the laser spot, the spatiotemporal control of reversible particle shrinking/swelling with a predefined extent on a per-second base can be implemented. Y1 - 2021 U6 - https://doi.org/10.1063/5.0036376 SN - 0003-6951 SN - 1077-3118 VL - 118 IS - 9 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Kopyshev, Alexey A1 - Lomadze, Nino A1 - Feldman, David A1 - Genzer, Jan A1 - Santer, Svetlana T1 - Making polymer brush photosensitive with azobenzene containing surfactants JF - Polymer : the international journal for the science and technology of polymers N2 - We report on rendering polyelectrolyte brushes photosensitive by loading them with azobenzene-containing cationic surfactants. Planar poly(methacrylic acid) (PMAA) brushes are synthesized using the “grafting from” free-radical polymerization scheme followed by exposure to a solution of photosensitive surfactants consisting of positively-charged head groups and hydrophobic tails into which azobenzene moieties are inserted. In this study the length of the hydrophobic methylene spacer connecting the azobenzene and the charged head group ranges from 4 to 10 CH2 groups. Under irradiation with UV light, the photo-isomerization of azobenzene integrated into a surfactant results in a change in size, geometry, dipole moment and free volume of the whole molecule. When the brush loaded with photosensitive surfactants is exposed to irradiation with UV interference patterns, the topography of the brush deforms following the distribution of the light intensity, exhibiting surface relief gratings (SRG). Since SRG formation is accompanied by a local rupturing of polymer chains in areas from which the polymer material is receding, most of the polymer material is removed from the surface during treatment with good solvent, leaving behind characteristic patterns of lines or dots. The azobenzene molecules still integrated within the polymer film can be removed by washing the brush with water. The remaining nano-structured brush can then be re-used for further functionalization. Although the opto-mechanically induced rupturing occurs for all surfactants, larger species do not penetrate deep enough into the brush such that after rupturing a leftover layer of polymer material remains on the substrate. This indicates that rupturing occurs predominantly in regions of high surfactant density. KW - Azobenzene containing cationic surfactants KW - Photosensitive polymer brushes KW - Opto-mechanically induced scission of polymer chains Y1 - 2015 U6 - https://doi.org/10.1016/j.polymer.2015.09.023 SN - 0032-3861 VL - 79 SP - 65 EP - 72 PB - Elsevier Science CY - Oxford ER - TY - JOUR A1 - Kopyshev, Alexey A1 - Galvin, Casey J. A1 - Genzer, Jan A1 - Lomadze, Nino A1 - Santer, Svetlana T1 - Opto-mechanical scission of polymer chains in photosensitive diblock-copolymer brushes JF - Langmuir N2 - In this paper we report on an opto-mechanical scission of polymer chains within photosensitive diblock-copolymer brushes grafted to flat solid substrates. We employ surface-initiated polymerization of methylmethacrylate (MMA) and t-butyl methacrylate (tBMA) to grow diblock-copolymer brushes of poly(methylmethacrylate-b-t-butyl methacrylate) following the atom transfer polymerization (ATRP) scheme. After the synthesis, deprotection of the PtBMA block yields poly(methacrylic acid) (PMAA). To render PMMA-b-PMAA copolymers photosensitive, cationic azobenzene containing surfactants are attached to the negatively charged outer PMAA block. During irradiation with an ultraviolet (UV) interference pattern, the extent of photoisomerization of the azobenzene groups varies spatially and results in a topography change of the brush, i.e., formation of surface relief gratings (SRG). The SRG formation is accompanied by local rupturing of the polymer chains in areas from which the polymer material recedes. This opto-mechanically induced scission of the polymer chains takes place at the interfaces of the two blocks and depends strongly on the UV irradiation intensity. Our results indicate that this process may be explained by employing classical continuum fracture mechanics, which might be important for tailoring the phenomenon for applying it to poststructuring of polymer brushes. Y1 - 2013 U6 - https://doi.org/10.1021/la403241t SN - 0743-7463 VL - 29 IS - 45 SP - 13967 EP - 13974 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Yadavalli, Nataraja Sekhar A1 - Linde, Felix A1 - Kopyshev, Alexey A1 - Santer, Svetlana T1 - Soft matter beats hard matter - rupturing of thin metallic films induced by mass transport in photosensitive polymer films JF - ACS applied materials & interfaces N2 - The interface between thin films of metal and polymer materials play a significant role in modern flexible microelectronics viz., metal contacts on polymer substrates, printed electronics and prosthetic devices. The major emphasis in metal polymer interface is on studying how the externally applied stress in the polymer substrate leads to the deformation and cracks in metal film and vice versa. Usually, the deformation process involves strains varying over large lateral dimensions because of excessive stress at local imperfections. Here we show that the seemingly random phenomena at macroscopic scales can be rendered rather controllable at submicrometer length scales. Recently, we have created a metal polymer interface system with strains varying over periods of several hundred nanometers. This was achieved by exploiting the formation of surface relief grating (SRG) within the azobenzene containing photosensitive polymer film upon irradiation with light interference pattern. Up to a thickness of 60 nm, the adsorbed metal film adapts neatly to the forming relief, until it ultimately ruptures into an array of stripes by formation of highly regular and uniform cracks along the maxima and minima of the polymer topography. This surprising phenomenon has far-reaching implications. This is the first time a direct probe is available to estimate the forces emerging in SRG formation in glassy polymers. Furthermore, crack formation in thin metal films can be studied literally in slow motion, which could lead to substantial improvements in the design process of flexible electronics. Finally, cracks are produced uniformly and at high density, contrary to common sense. This could offer new strategies for precise nanofabrication procedures mechanical in character. KW - metal/polymer interface KW - rupturing of metal film KW - forces generated during surface relief grating formation KW - in situ atomic force microscopy KW - azobenzene KW - two beam interferometry Y1 - 2013 U6 - https://doi.org/10.1021/am4006132w SN - 1944-8244 VL - 5 IS - 16 SP - 7743 EP - 7747 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - König, Tobias A1 - Papke, Thomas A1 - Kopyshev, Alexey A1 - Santer, Svetlana T1 - Atomic force microscopy nanolithography fabrication of metallic nano-slits using silicon nitride tips JF - Journal of materials science N2 - In this paper, we report on the properties of nano-slits created in metal thin films using atomic force microscope (AFM) nanolithography (AFM-NL). We demonstrate that instead of expensive diamond AFM tips, it is also possible to use low cost silicon nitride tips. It is shown that depending on the direction of scratching, nano-slits of different widths and depths can be fabricated at constant load force. We elucidate the reasons for this behavior and identify an optimal direction and load force for scratching a gold layer. Y1 - 2013 U6 - https://doi.org/10.1007/s10853-013-7188-x SN - 0022-2461 VL - 48 IS - 10 SP - 3863 EP - 3869 PB - Springer CY - New York ER - TY - JOUR A1 - Zakrevskyy, Yuriy A1 - Kopyshev, Alexey A1 - Lomadze, Nino A1 - Morozova, Elena A1 - Lysyakova, Liudmila A1 - Kasyanenko, Nina A1 - Santer, Svetlana T1 - DNA compaction by azobenzene-containing surfactant JF - Physical review : E, Statistical, nonlinear and soft matter physics N2 - We report on the interaction of cationic azobenzene-containing surfactant with DNA investigated by absorption and fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy. The properties of the surfactant can be controlled with light by reversible switching of the azobenzene unit, incorporated into the surfactant tail, between a hydrophobic trans (visible irradiation) and a hydrophilic cis (UV irradiation) configuration. The influence of the trans-cis isomerization of the azobenzene on the compaction process of DNA molecules and the role of both isomers in the formation and colloidal stability of DNA-surfactant complexes is discussed. It is shown that the trans isomer plays a major role in the DNA compaction process. The influence of the cis isomer on the DNA coil configuration is rather small. The construction of a phase diagram of the DNA concentration versus surfactant/DNA charge ratio allows distancing between three major phases: colloidally stable and unstable compacted globules, and extended coil conformation. There is a critical concentration of DNA above which the compacted globules can be hindered from aggregation and precipitation by adding an appropriate amount of the surfactant in the trans configuration. This is because of the compensation of hydrophobicity of the globules with an increasing amount of the surfactant. Below the critical DNA concentration, the compacted globules are colloidally stable and can be reversibly transferred with light to an extended coil state. Y1 - 2011 U6 - https://doi.org/10.1103/PhysRevE.84.021909 SN - 1539-3755 VL - 84 IS - 2 PB - American Physical Society CY - College Park ER -