TY - JOUR A1 - Gronau, Norbert T1 - Determining the appropriate degree of autonomy in cyber-physical production systems JF - CIRP Journal of Manufacturing Science and Technology N2 - Existing factories face multiple problems due to their hierarchical structure of decision making and control. Cyber-physical systems principally allow to increase the degree of autonomy to new heights. But which degree of autonomy is really useful and beneficiary? This paper differentiates diverse definitions of autonomy and approaches to determine them. Some experimental findings in a lab environment help to answer the question raised in this paper. KW - Cyber-phyiscal system KW - Degree of autonomy KW - Simulation KW - Production system Y1 - 2019 U6 - https://doi.org/10.1016/j.cirpj.2019.05.001 SN - 1755-5817 VL - 26 SP - 70 EP - 80 PB - Elsevier CY - Amsterdam ER - TY - BOOK A1 - Gronau, Norbert A1 - Gäbler, Andreas T1 - Einführung in die Wirtschaftsinformatik : Band 1 T3 - Skripte zur Wirtschafsinformatik N2 - Dieses Buch bietet eine Einführung in die Wirtschaftsinformatik in kommentierter Form. Es richtet sich in erster Linie an Studierende der Betriebswirtschaftslehre und der Wirtschaftsinformatik. Band 1 beinhaltet eine Betrachtung der nachfolgenden Themenpunkte: Der erste Abschnitt gibt eine Einführung in die Bedeutung der Wirtschaftsinformatik als Wissenschaftsfach und damit verbunden in ihre praktische Anwendungsorientierung. Der folgende Abschnitt liefert einen Überblick über die der Informatik zugrunde liegenden Konzepte und Techniken von Computer-Hardware und -Software sowie Begriffsbestimmungen und Beschreibungsmerkmale der Daten, Datenhaltung und -speicherung. Ein weiterer Abschnitt ist dem Komplex Netzwerke und Internet gewidmet. In kompakter Form werden Grundlagen der Netze und Netzwerkdienste erklärt. Das Thema Datenmodellierung bildet den Schwerpunkt dieses Bandes. Die Vorgehensweise zur Erstellung und Bearbeitung von Modellen wird in sehr ausführlicher Form dargelegt. Den Abschluss bildet die Verbindung zwischen Datenbanken und betrieblichen Anwedungssystemen. Y1 - 2019 SN - 978-3-95545-279-7 PB - Gito CY - Berlin ET - 8. durchgesehene Auflage ER - TY - GEN A1 - Beierle, Christoph A1 - Berndt, Jan Ole A1 - Gronau, Norbert A1 - Timm, Ingo J. T1 - Intentional Forgetting: A Huge Potential for Organizations BT - Interview with Prof. Norbert Gronau, University of Potsdam T2 - Künstliche Intelligenz Y1 - 2019 U6 - https://doi.org/10.1007/s13218-018-00573-y SN - 0933-1875 SN - 1610-1987 VL - 33 IS - 1 SP - 85 EP - 87 PB - Springer CY - Heidelberg ER - TY - BOOK A1 - Gronau, Norbert A1 - Gäbler, Andreas T1 - Einführung in die Wirtschaftsinformatik : Band 2 T3 - Skripte zur Wirtschaftsinformatik N2 - Dieses Buch bietet eine Einführung in die Wirtschaftsinformatik in kommentierter Form. Es richtet sich in erster Linie an Studierende der Betriebswirtschaftslehre und der Wirtschaftsinformatik. Zu Beginn dieses Bandes wird eine Einführung in die Funktionalität einer Oracle-Datenbank am Beispiel der Version Oracle 10g XE als frei verfügbare Version des relationalen Datenbanksystems Oracle 10g gegeben. Der thematische Schwerpunkt im Band 2, die Datenbankabfragesprache SQL, baut auf dem Teil der Datenmodellierung des Bandes 1 auf. Zum besseren Verständnis der Zusammenhänge ist ein durchgehend verwendbares Beispiel gewählt worden. An Hand dieses Beispiels werden sowohl Begriffe als auch Zusammenhänge in der Umsetzung vom relationalen Datenmodell zur Datenbank erläutert. Im Detail werden sowohl Syntax als auch Semantik der Datenbeschreibungssprache SQL erläutert. Y1 - 2019 SN - 978-3-9554528-5-8 PB - Gito CY - Berlin ET - 8. durchgesehene Auflage ER - TY - GEN A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Students’ Acceptance of Technology-Mediated Teaching – How It Was Influenced During the COVID-19 Pandemic in 2020: A Study From Germany T2 - Postprints der Universität Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe N2 - In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring–summer 2020 semester. Our study focused on (1) the students’ acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study’s results and derive short- and long-term implications for science and practice. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 141 KW - COVID-19 KW - digital learning KW - discipline differences KW - e-learning KW - TAM KW - technology acceptance KW - technology-mediated teaching KW - university teaching Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-521615 SN - 1867-5808 ER - TY - JOUR A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Students’ acceptance of technology-mediated teaching – How it was influenced during the COVID-19 Pandemic in 2020 BT - A study from Germany JF - Frontiers in psychology / Frontiers Research Foundation N2 - In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring–summer 2020 semester. Our study focused on (1) the students’ acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study’s results and derive short- and long-term implications for science and practice. KW - COVID-19 KW - digital learning KW - discipline differences KW - e-learning KW - TAM KW - technology acceptance KW - technology-mediated teaching KW - university teaching Y1 - 2020 U6 - https://doi.org/10.3389/fpsyg.2021.636086 SN - 1664-1078 VL - 12 PB - Frontiers Research Foundation CY - Lausanne ER - TY - GEN A1 - Ullrich, Andre A1 - Enke, Judith A1 - Teichmann, Malte A1 - Kress, Antonio A1 - Gronau, Norbert T1 - Audit - and then what? BT - a roadmap for digitization of learning factories T2 - Procedia Manufacturing N2 - Current trends such as digital transformation, Internet of Things, or Industry 4.0 are challenging the majority of learning factories. Regardless of whether a conventional learning factory, a model factory, or a digital learning factory, traditional approaches such as the monotonous execution of specific instructions don‘t suffice the learner’s needs, market requirements as well as especially current technological developments. Contemporary teaching environments need a clear strategy, a road to follow for being able to successfully cope with the changes and develop towards digitized learning factories. This demand driven necessity of transformation leads to another obstacle: Assessing the status quo and developing and implementing adequate action plans. Within this paper, details of a maturity-based audit of the hybrid learning factory in the Research and Application Centre Industry 4.0 and a thereof derived roadmap for the digitization of a learning factory are presented. KW - Audit KW - Digitization KW - Learning Factory KW - Roadmap Y1 - 2019 U6 - https://doi.org/10.1016/j.promfg.2019.03.025 SN - 2351-9789 VL - 31 SP - 162 EP - 168 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Grum, Marcus A1 - Bender, Benedict A1 - Alfa, A. S. A1 - Gronau, Norbert T1 - A decision maxim for efficient task realization within analytical network infrastructures JF - Decision support systems : DSS ; the international journal N2 - Faced with the increasing needs of companies, optimal dimensioning of IT hardware is becoming challenging for decision makers. In terms of analytical infrastructures, a highly evolutionary environment causes volatile, time dependent workloads in its components, and intelligent, flexible task distribution between local systems and cloud services is attractive. With the aim of developing a flexible and efficient design for analytical infrastructures, this paper proposes a flexible architecture model, which allocates tasks following a machine-specific decision heuristic. A simulation benchmarks this system with existing strategies and identifies the new decision maxim as superior in a first scenario-based simulation. KW - Analytics KW - Architecture concepts KW - Cyber-physical systems KW - Internet of things KW - Task realization strategies KW - Simulation Y1 - 2018 U6 - https://doi.org/10.1016/j.dss.2018.06.005 SN - 0167-9236 SN - 1873-5797 VL - 112 SP - 48 EP - 59 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Teichmann, Malte A1 - Ullrich, Andre A1 - Gronau, Norbert T1 - Subject-oriented learning BT - a new perspective for vocational training in learning factories T2 - Procedia Manufacturing N2 - The transformation to a digitized company changes not only the work but also social context for the employees and requires inter alia new knowledge and skills from them. Additionally, individual action problems arise. This contribution proposes the subject-oriented learning theory, in which the employees´ action problems are the starting point of training activities in learning factories. In this contribution, the subject-oriented learning theory is exemplified and respective advantages for vocational training in learning factories are pointed out both theoretically and practically. Thereby, especially the individual action problems of learners and the infrastructure are emphasized as starting point for learning processes and competence development. KW - Subject-oriented learning KW - action problems KW - vocational training KW - learning factories Y1 - 2019 U6 - https://doi.org/10.1016/j.promfg.2019.03.012 SN - 2351-9789 VL - 31 SP - 72 EP - 78 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Gronau, Norbert A1 - Schaefer, Martin T1 - Why metadata matters for the future of copyright JF - European Intellectual Property Review N2 - In the copyright industries of the 21st century, metadata is the grease required to make the engine of copyright run smoothly and powerfully for the benefit of creators, copyright industries and users alike. However, metadata is difficult to acquire and even more difficult to keep up to date as the rights in content are mostly multi-layered, fragmented, international and volatile. This article explores the idea of a neutral metadata search and enhancement tool that could constitute a buffer to safeguard the interests of the various proprietary database owners and avoid the shortcomings of centralised databases. KW - copyright KW - databases KW - metadata KW - music industry Y1 - 2021 SN - 0142-0461 VL - 43 IS - 8 SP - 488 EP - 494 PB - Sweet & Maxwell CY - London ER - TY - BOOK A1 - Gronau, Norbert T1 - Geschäftsprozessmanagement in Wirtschaft und Verwaltung N2 - Dieses Standardwerk zu Geschäftsprozessmanagement in Wirtschaft und Verwaltung gibt gleichzeitig einen Überblick über den aktuellen Stand der Forschung zu diesem Thema und führt Interessierte wie Studierende oder Praktiker in das Thema und seine Facetten ein. Aktuelle Entwicklungen wie Robotic Process Automation und Process Mining werden aufgegriffen. Im Mittelpunkt stehen die drei wesentlichen GPM- Blickwinkel Technik, Organisation und Mensch. Aus Sicht der Forschung werden innovative Methoden zur Modellierung und Analyse von Geschäftsprozessen beschrieben. Aus Sicht der Lehre dient das Buch als Einstiegslektüre und liefert Ansatzpunkte für die vertiefte Befassung mit einzelnen Aspekten des Geschäftsprozessmanagements. Für die Praxis beschreibt dieses Werk die dort bestehenden konzeptionellen und methodischen Hindernisse des Prozessmanagements und zeigt Wege zur Überwindung dieser Hindernisse. Die vorliegende Auflage wurde vollständig überarbeitet und stark erweitert, u. a. mit neuen Kapiteln zu Software für das Geschäftsprozessmanagement und zum Change Management. Y1 - 2022 UR - https://ebookcentral.proquest.com/lib/potsdamuni/detail.action?docID=7119120 SN - 978-3-95545-399-2 PB - Gito CY - Berlin ET - 3. Aufl. ER - TY - CHAP A1 - Rojahn, Marcel A1 - Gronau, Norbert T1 - Digital platform concepts for manufacturing companies BT - a review T2 - 10th International Conference on Future Internet of Things and Cloud (FiCloud) N2 - Digital Platforms (DPs) has established themself in recent years as a central concept of the Information Technology Science. Due to the great diversity of digital platform concepts, clear definitions are still required. Furthermore, DPs are subject to dynamic changes from internal and external factors, which pose challenges for digital platform operators, developers and customers. Which current digital platform research directions should be taken to address these challenges remains open so far. The following paper aims to contribute to this by outlining a systematic literature review (SLR) on digital platform concepts in the context of the Industrial Internet of Things (IIoT) for manufacturing companies and provides a basis for (1) a selection of definitions of current digital platform and ecosystem concepts and (2) a selection of current digital platform research directions. These directions are diverted into (a) occurrence of digital platforms, (b) emergence of digital platforms, (c) evaluation of digital platforms, (d) development of digital platforms, and (e) selection of digital platforms. Y1 - 2023 SN - 979-8-3503-1635-3 U6 - https://doi.org/10.1109/FiCloud58648.2023.00030 SP - 149 EP - 158 PB - IEEE CY - [Erscheinungsort nicht ermittelbar] ER - TY - CHAP A1 - Vladova, Gergana A1 - Gronau, Norbert A1 - Rüdian, Sylvio Leo T1 - Wissenstransfer in Bildung und Weiterbildung BT - der Beitrag Künstlicher Intelligenz T2 - Digitale Transformation - gutes Arbeiten und Qualifizierung aktiv gestalten Y1 - 2019 SN - 978-3-95545-309-1 SP - 89 EP - 106 PB - Gito CY - Berlin ER - TY - CHAP A1 - Bender, Benedict A1 - Gronau, Norbert ED - Bui, Tung T1 - Introduction to the Minitrack on towards the future of enterprise systems T2 - Proceedings of the 55th Hawaii International Conference on System Sciences N2 - Enterprise systems have long played an important role in businesses of various sizes. With the increasing complexity of today’s business relationships, specialized application systems are being used more and more. Moreover, emerging technologies such as artificial intelligence are becoming accessible for enterprise systems. This raises the question of the future role of enterprise systems. This minitrack covers novel ideas that contribute to and shape the future role of enterprise systems with five contributions. Y1 - 2022 SN - 978-0-9981331-5-7 U6 - https://doi.org/10.24251/HICSS.2022.869 SP - 7232 EP - 7233 PB - Hawaii International Conference on System Sciences CY - Honolulu, HI ER - TY - CHAP A1 - Gronau, Norbert ED - Roth, Stefan ED - Corsten, Hans T1 - Künstliche Intelligenz in der Produktionssteuerung T2 - Handbuch Digitalisierung Y1 - 2022 SN - 978-3-8006-6562-4 SN - 978-3-8006-6563-1 SP - 629 EP - 650 PB - Verlag Franz Vahlen CY - München ER - TY - BOOK A1 - Gronau, Norbert T1 - ERP-Systeme BT - Architektur, Management und Funktionen des Enterprise Resource Planning T3 - De Gruyter Studium KW - ERP KW - Enterprise Resource Planning KW - Wirtschaftsinformatik KW - Industrie 4.0 Y1 - 2021 SN - 978-3-11-066339-6 SN - 978-3-11-066283-2 U6 - https://doi.org/10.1515/9783110663396 SN - 2365-7197 SN - 2365-7200 PB - De Gruyter Oldenbourg CY - Berlin ; Boston ET - 4. Auflage ER - TY - CHAP A1 - Grum, Marcus A1 - Blunk, Oliver A1 - Rojahn, Marcel A1 - Fettke, Peter A1 - Gronau, Norbert T1 - Research challenges of knowledge modelling and the outline of a research agenda T2 - Knowledge in digital age : IFKAD 2020 KW - knowledge management KW - process modelling KW - research challenges Y1 - 2020 SN - 978-88-96687-13-0 SN - 2280-787X PB - The Arts of Business Institute CY - Matera, Italy ER - TY - JOUR A1 - Schüffler, Arnulf A1 - Thim, Christof A1 - Haase, Jennifer A1 - Gronau, Norbert A1 - Kluge, Annette T1 - Information processing in work environment 4.0 and the beneficial impact of intentional forgetting on change management T1 - Informationsverarbeitung in der Industrie 4.0 und die vorteilhafte Wirkung von intentionalem Vergessen für das Change Management JF - Zeitschrift für Arbeits- und Organisationspsychologie : german journal of work and organizational psychology N2 - Industry 4.0, based on increasingly progressive digitalization, is a global phenomenon that affects every part of our work. The Internet of Things (IoT) is pushing the process of automation, culminating in the total autonomy of cyber-physical systems. This process is accompanied by a massive amount of data, information, and new dimensions of flexibility. As the amount of available data increases, their specific timeliness decreases. Mastering Industry 4.0 requires humans to master the new dimensions of information and to adapt to relevant ongoing changes. Intentional forgetting can make a difference in this context, as it discards nonprevailing information and actions in favor of prevailing ones. Intentional forgetting is the basis of any adaptation to change, as it ensures that nonprevailing memory items are not retrieved while prevailing ones are retained. This study presents a novel experimental approach that was introduced in a learning factory (the Research and Application Center Industry 4.0) to investigate intentional forgetting as it applies to production routines. In the first experiment (N = 18), in which the participants collectively performed 3046 routine related actions (t1 = 1402, t2 = 1644), the results showed that highly proceduralized actions were more difficult to forget than actions that were less well-learned. Additionally, we found that the quality of cues that trigger the execution of routine actions had no effect on the extent of intentional forgetting. N2 - Industrie 4.0 ist basierend auf fortschreitender Digitalisierung eine globale Entwicklung, die in allen Bereichen uns heute bekannter Arbeits- und Lebenswelten Einzug halten wird. Das Internet der Dinge beschleunigt Automatisierung bis hin zu autonomen cyber-physischen Systemen. Dieser Prozess wird begleitet von einer weiteren Zunahme von Daten. Gleichzeitig reduziert sich die Aktualität der Daten und damit die Dauer ihrer Relevanz. Die Herausforderungen im Umfeld von Industrie 4.0 zu meistern bedeutet für Menschen in Organisationen diese wachsenden Datenmengen und Anpassung an fortwährende Veränderung zu bewältigen. Intentionales Vergessen kann hier unterstützen. Intentionales Vergessen fokussiert das Vergessen irrelevanter Informationen und Verhaltensweisen zu Gunsten relevanter. In diesem Artikel stellen wir einen experimentellen Ansatz zur Erforschung von Prozessen des intentionalen Vergessens in Organisationen in einer Laborumgebung (Anwendungszentrum Industrie 4.0) vor. Im Fokus der Untersuchung steht dabei das Vergessen einer ungültig gewordenen Produktions-Routine und das Ausführen der neuen, jetzt gültigen. Wir beschreiben dabei zunächst das innovative experimentelle Design zur Untersuchung von Vergessensprozessen. In einer ersten Untersuchung mit N = 18 Personen, die insgesamt 3046 Handlungen zu t1 (1402) und t2 (1644) ausführen, zeigte sich, dass hoch gelernte (prozeduralisierte) Handlungen schwerer zu vergessen sind als ohnehin nicht prozeduralisierte. Es zeigt sich aber kein Unterschied hinsichtlich der Art der Handlungen und der Hinweisreize, durch die sie aufgerufen werden. KW - intentional forgetting KW - retrieval cues KW - production routine KW - intentionales Vergessen KW - Produktions-Routine KW - Hinweisreize Y1 - 2019 U6 - https://doi.org/10.1026/0932-4089/a000307 SN - 0932-4089 SN - 2190-6270 VL - 64 IS - 1 SP - 17 EP - 29 PB - Hogrefe CY - Göttingen ER - TY - CHAP A1 - Bender, Benedict A1 - Gronau, Norbert A1 - Winter, Robert ED - Bui, Tung X. T1 - Minitrack introduction enterprise-level information systems BT - research minitrack T2 - Proceedings of the 56th Hawaii International Conference on System Sciences N2 - While Information Systems (IS) Research on the individual and workgroup level of analysis is omnipresent, research on the enterprise-level IS is less frequent. Even though research on Enterprise Systems and their management is established in academic associations and conference programs, enterprise-level phenomena are underrepresented. This minitrack provides a forum to integrate existing research streams that traditionally needed to be attached to other topics (such as IS management or IS governance). The minitrack received broad attention. The three selected papers address different facets of the future role of enterprise-wide IS including aspects such as carbonization, ecosystem integration, and technology-organization fit. KW - information systems research KW - enteprise-level KW - enterprise systems Y1 - 2023 SN - 978-0-9981331-6-4 SN - 2572-6862 SP - 5809 EP - 5810 PB - Hawaii International Conference on System Sciences CY - Honolulu, HI ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Eigelshoven, Felix A1 - Gronau, Norbert A1 - Ritter, Ann-Carolin T1 - Crowdsourcing bei industriellen Innovationen T1 - Crowdsourcing for industrial innovations BT - Lösungsansätze und Herausforderung für KMU BT - solutions and challenges for SMEs JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Innovationstätigkeit im industriellen Umfeld verlagert sich durch die Digitalisierung hin zu Produkt-Service-Systemen. Kleine und mittlere Unternehmen haben sich in ihrer Entwicklungstätigkeit bisher stark auf die Produktentwicklung bezogen. Der Umstieg auf „smarte“ Produkte und die Kopplung an Dienstleistungen erfordert häufig personelle und finanzielle Ressourcen, welche KMU nicht aufbringen können. Crowdsourcing stellt eine Möglichkeit dar, den Innovationsprozess für externe Akteure zu öffnen und Kosten- sowie Geschwindigkeitsvorteile zu realisieren. Bei der Integration von Crowdsourcing-Elementen ist jedoch einigen Herausforderungen zu begegnen. Dieser Beitrag zeigt sowohl die Potenziale als auch die Barrieren einer Crowdsourcing-Nutzung im industriellen Umfeld auf. N2 - Innovation activity in the industrial environment is shifting towards product-service systems as a result of digitalisation. Small and medium-sized enterprises have so far focused their development activities strongly on product development. The switch to “smart” products and the coupling to services often requires personnel and financial resources that SMEs cannot provide. Crowdsourcing is one way of opening up the innovation process to external actors and realising cost and speed advantages. However, the integration of crowdsourcing elements faces several challenges. This article shows both the potentials and the barriers of crowdsourcing in the industrial environment. KW - Crowdsourcing KW - industrielle Innovationen KW - KMU KW - industrial innovation KW - SMEs Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-6_S9-13 SN - 2364-9208 VL - 36 IS - 6 SP - 9 EP - 13 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Gronau, Norbert T1 - Process model driven learning scenario implementation JF - Procedia manufacturing N2 - The implementation of learning scenarios is a diversely challenging, frequently purely manual and effortful undertaking. In this contribution a process based view is used in scenario generation to overcome communication, coordination and technical gaps. A framework is provided to identify, define and integrate technological artefacts and learning content as modular, reusable building blocks along a modeled production process. The specific contribution is twofold: 1) the theoretical framework represents a unique basis for modularization of content and technology in order to enhance reusability, 2) the model based scenario definition is a starting point for automated implementation of learning scenarios in industrial learning environments that has not been created before. KW - learning factories KW - learning scenario implementation KW - process modelling Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.071 SN - 2351-9789 VL - 45 SP - 522 EP - 527 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ullrich, André A1 - Teichmann, Malte A1 - Gronau, Norbert T1 - Fast trainable capabilities in software engineering-skill development in learning factories JF - Ji suan ji jiao yu = Computer Education / Qing hua da xue N2 - The increasing demand for software engineers cannot completely be fulfilled by university education and conventional training approaches due to limited capacities. Accordingly, an alternative approach is necessary where potential software engineers are being educated in software engineering skills using new methods. We suggest micro tasks combined with theoretical lessons to overcome existing skill deficits and acquire fast trainable capabilities. This paper addresses the gap between demand and supply of software engineers by introducing an actionoriented and scenario-based didactical approach, which enables non-computer scientists to code. Therein, the learning content is provided in small tasks and embedded in learning factory scenarios. Therefore, different requirements for software engineers from the market side and from an academic viewpoint are analyzed and synthesized into an integrated, yet condensed skills catalogue. This enables the development of training and education units that focus on the most important skills demanded on the market. To achieve this objective, individual learning scenarios are developed. Of course, proper basic skills in coding cannot be learned over night but software programming is also no sorcery. KW - learning factory KW - programming skills KW - software engineering KW - training Y1 - 2021 U6 - https://doi.org/10.16512/j.cnki.jsjjy.2020.12.002 SN - 1672-5913 IS - 12 SP - 2 EP - 10 PB - [Verlag nicht ermittelbar] CY - Bei jing shi ER - TY - CHAP A1 - Gronau, Norbert A1 - Vladova, Gergana A1 - Thim, Christof T1 - Umgang mit Wissen im interkulturellen Vergleich BT - Einführung und Leitfragen T2 - Umgang mit Wissen im interkulturellen Vergleich : Beiträge aus Forschung und Unternehmenspraxis ; Acatech-Workshop, Potsdam, 20. Mai 2008 N2 - Die Bedeutung der Ressource Wissen für die Unternehmensentwicklung ist heutzutage unumstritten. Um wettbewerbsfähig bleiben zu können, müssen Unternehmen die Erzeugung, Teilung und systematische Nutzung von Wissen fördern. Dabei stehen sowohl die individuelle Wissensbasis (und damit jeder Mitarbeiter) als auch die kollektive Wissensbasis (und damit das ganze Unternehmen) im Vordergrund. Der Faktor Kultur gewinnt in diesem Zusammenhang zunehmend an Bedeutung: Er beeinflusst alle drei Ebenen des Wissensmanagements - Mensch, Organisation und Technologie. Neben den Besonderheiten der Organisationskultur und der Kultur unterschiedlicher Mitarbeitergruppen sind in international agierenden Unternehmen auch die spezifischen Merkmale der jeweiligen Landeskultur zu berücksichtigen. Gemeinsam mit dem Lehrstuhl für Wirtschaftsinformatik und Electronic Government der Universität Potsdam hat acatech im Mai 2008 einen Workshop mit Vertretern aus Wirtschaft, Politik und Wissenschaft zum Umgang mit Wissen im interkulturellen Vergleich veranstaltet. Vor diesem Hintergrund entstand der acatech diskutiert-Band "Umgang mit Wissen im interkulturellen Vergleich - Beiträge aus Forschung und Unternehmenspraxis". Darin enthalten sind Beiträge, die u. a. danach fragen, welche wechselseitigen Beziehungen zwischen Technik und Kultur bestehen, inwieweit Experten- und Wissensnetzwerke als interkulturelles Instrument zum Umgang mit Wissen geeignet sind, wie Unternehmen ihre Mitarbeiter auf Auslandseinsätze und die Begegnung mit fremden Kulturen vorbereiten können und welche Rolle Kommunikation als Methode des Wissenstransfers spielt. Y1 - 2008 SN - 978-3-8167-7822-6 VL - 2008 SP - 11 EP - 25 PB - Fraunhofer-IRB-Verl. CY - Stuttgart ER - TY - BOOK A1 - Thim, Christof A1 - Gronau, Norbert A1 - Röchert-Voigt, Tanja A1 - Proske, Niels A1 - Heine, Moreen T1 - Organisation des Schutzes der kritischen Infrastruktur Wasserversorgung BT - Grundlagen und praktische Anwendung für Wasserversorger N2 - Die Erfüllung sicherheitsrelevanter Aufgaben, gerade im Bereich der Wasserversorgung, erfolgt immer vor dem Hintergrund des Schutzes der Kritischen Infrastruktur selbst und eines effektiven Bevölkerungsschutzes. Daher erfordert die Organisation des Schutzes eine über die betriebsbezogene Sichtweise hinausgehende überorganisatorische Betrachtung im Gesamtkontext zunehmender Verflechtung und Abhängigkeiten der Organisationen. Die vorliegende Broschüre richtet sich daher insbesondere an kleine und mittlere Betreiber Kritischer Infrastrukturen, insbesondere im Bereich der Wasserversorgung. Diese sollen in die Lage versetzt werden, eine anforderungsgerechte, skalierbare und vor allem ressourceneffiziente Schutzkonzepterstellung durchführen zu können. Y1 - 2012 SN - 978-3-942183-78-9 PB - Gito Verlag GmbH CY - Berlin ER - TY - CHAP A1 - Gronau, Norbert A1 - Weber, Edzard A1 - Heinze, Priscilla T1 - Cyclic process model transformation T2 - Proceedings of the 12th European Conference on Knowledge Management N2 - Process analysis usually focuses only on single and selected processes. It is either existent processes that are recorded and analysed or reference processes that are implemented. So far no evident effort has been put into generalising specific process aspects into patterns and comparing those patterns with regard to their efficiency and effectiveness. This article focuses on the combination of dynamic and holistic analytical elements in enterprise architectures. Our goal is to outline an approach to analyse the development of business processes in a cyclical matter and demonstrate this approach based on an existent modelling language. We want to show that organisational learning can derive from the systematic analysis of past and existent processes from which patterns of successful problem solving can be deducted. Y1 - 2011 SN - 978-1-908272-09-6 IS - 2 SP - 349 EP - 359 PB - Academic Conferences Ltd. CY - Reading ER - TY - CHAP A1 - Thim, Christof A1 - Grum, Marcus A1 - Schüffler, Arnulf A1 - Roling, Wiebke A1 - Kluge, Annette A1 - Gronau, Norbert ED - Andersen, Ann-Louise ED - Andersen, Rasmus ED - Brunoe, Thomas Ditlev ED - Larsen, Maria Stoettrup Schioenning ED - Nielsen, Kjeld ED - Napoleone, Alessia ED - Kjeldgaard, Stefan T1 - A concept for a distributed Interchangeable knowledge base in CPPS T2 - Towards sustainable customization: cridging smart products and manufacturing systems N2 - As AI technology is increasingly used in production systems, different approaches have emerged from highly decentralized small-scale AI at the edge level to centralized, cloud-based services used for higher-order optimizations. Each direction has disadvantages ranging from the lack of computational power at the edge level to the reliance on stable network connections with the centralized approach. Thus, a hybrid approach with centralized and decentralized components that possess specific abilities and interact is preferred. However, the distribution of AI capabilities leads to problems in self-adapting learning systems, as knowledgebases can diverge when no central coordination is present. Edge components will specialize in distinctive patterns (overlearn), which hampers their adaptability for different cases. Therefore, this paper aims to present a concept for a distributed interchangeable knowledge base in CPPS. The approach is based on various AI components and concepts for each participating node. A service-oriented infrastructure allows a decentralized, loosely coupled architecture of the CPPS. By exchanging knowledge bases between nodes, the overall system should become more adaptive, as each node can “forget” their present specialization. KW - learning KW - distributed knowledge base KW - artificial intelligence KW - CPPS Y1 - 2021 SN - 978-3-030-90699-3 SN - 978-3-030-90702-0 SN - 978-3-030-90700-6 U6 - https://doi.org/10.1007/978-3-030-90700-6_35 SP - 314 EP - 321 PB - Springer CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Thim, Christof A1 - Gronau, Norbert ED - Andersen, Ann-Louise ED - Andersen, Rasmus ED - Brunoe, Thomas Ditlev ED - Larsen, Maria Stoettrup Schioenning ED - Nielsen, Kjeld ED - Napoleone, Alessia ED - Kjeldgaard, Stefan T1 - Aiming for knowledge-transfer-optimizing intelligent cyber-physical systems T2 - Towards sustainable customization : cridging smart products and manufacturing systems N2 - Since more and more production tasks are enabled by Industry 4.0 techniques, the number of knowledge-intensive production tasks increases as trivial tasks can be automated and only non-trivial tasks demand human-machine interactions. With this, challenges regarding the competence of production workers, the complexity of tasks and stickiness of required knowledge occur [1]. Furthermore, workers experience time pressure which can lead to a decrease in output quality. Cyber-Physical Systems (CPS) have the potential to assist workers in knowledge-intensive work grounded on quantitative insights about knowledge transfer activities [2]. By providing contextual and situational awareness as well as complex classification and selection algorithms, CPS are able to ease knowledge transfer in a way that production time and quality is improved significantly. CPS have only been used for direct production and process optimization, knowledge transfers have only been regarded in assistance systems with little contextual awareness. Embedding production and knowledge transfer optimization thus show potential for further improvements. This contribution outlines the requirements and a framework to design these systems. It accounts for the relevant factors. KW - smart automation KW - smart production KW - human-machine-interaction Y1 - 2021 SN - 978-3-030-90699-3 SN - 978-3-030-90700-6 SN - 978-3-030-90702-0 U6 - https://doi.org/10.1007/978-3-030-90700-6_16 SP - 149 EP - 157 PB - Springer CY - Cham ER - TY - JOUR A1 - Vladova, Gergana A1 - Wotschack, Philip A1 - Lareiro, Patricia de Paiva A1 - Gronau, Norbert A1 - Thim, Christof T1 - Lernen mit Assistenzsystemen T1 - Learning with assistance systems BT - vor lauter Aufgaben den Prozess nicht sehen? BT - not seeing the process for the tasks? JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Der Beitrag beschreibt die Konzeption und Durchführung und bietet einen Einblick in die ersten Ergebnisse einer Untersuchung mit experimentellem Design in einer simulierten Prozessumgebung im Forschungs- und Anwendungszentrum Industrie 4.0 in Potsdam. Im Mittelpunkt stehen Anlernprozesse im Bereich der Einfacharbeit (Helfertätigkeiten) und ihre Gestaltung durch den Einsatz digitaler Assistenzsysteme. In der Arbeitsforschung finden sich Hinweise darauf, dass mit dem Einsatz dieser Systeme Prozesswissen verloren geht, im Sinne einer guten Kenntnis des gesamten Arbeitsprozesses, in den die einzelnen Tätigkeiten eingebettet sind. Das kann sich als Problem erweisen, vor allem wenn unvorhersehbare Situationen oder Fehler eintreten. Um die Rolle von Prozesswissen beim Einsatz von digitalen Assistenzsystemen zu untersuchen, wird im Experiment eine echte Fabriksituation simuliert. Die Probanden werden über ein Assistenzsystem Schritt für Schritt in ihre Aufgabentätigkeit angelernt, einem Teil der Probanden wird allerdings am Anfang zusätzlich Prozesswissen im Rahmen einer kurzen Schulung vermittelt. N2 - The paper describes the conception and implementation as well as offers an insight into the first results of a study with experimental design in a simulated process environment at the Research and Application Center Industry 4.0 in Potsdam. The focus is on learning processes in the field of simple work and their organization through the use of digital assistance systems. In labour research, there are indications that process knowledge is lost with the use of these systems, in the sense of a good knowledge of the entire work process in which the individual activities are embedded. To investigate the role of process knowledge in the use of digital assistance systems, a real factory situation is simulated in the experiment. KW - Assistenzsysteme KW - Industrie 4.0 KW - Prozesswissen KW - Lernfabrik KW - assistance systems KW - industry 4.0 KW - process knowledge KW - learning factory Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-3_S16-20 SN - 2364-9208 VL - 36 IS - 3 SP - 16 EP - 20 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Schüffler, Arnulf A1 - Thim, Christof A1 - Haase, Jennifer A1 - Gronau, Norbert A1 - Kluge, Annette T1 - Willentliches Vergessen T1 - Intentional forgetting - precondition for flexibility and adaptivity in a permanent changing world BT - Voraussetzung für Flexibilität und Veränderungsfähigkeit in einer sich permanent verändernden Welt JF - Gruppe. Interaktion. Organisation. Zeitschrift für Angewandte Organisationspsychologie (GIO) N2 - Dieser Beitrag im Journal Gruppe. Interaktion. Organisation. stellt dar, wie willentliches Vergessen die Anpassung an notwendige Veränderungen für Individuen, Gruppen und Organisationen verbessert und wie willentliches Vergessen bewusst und gezielt gestaltet werden kann. Damit Verhalten in Folge einer notwendigen Veränderung angepasst wird, reicht es nicht aus, dass Menschen wissen was zu tun ist, willens und in der Lage sind ihr Verhalten zu verändern. Eine Veränderung gelingt nur dann, wenn nur noch das neue Verhalten zur Anwendung kommt und nicht mehr das Alte, wenn das alte Verhalten vergessen wird. Der notwendige Prozess des willentlichen Vergessens ist durch Entfernen von Hinweisreizen, die die Erinnerung des zu Vergessenden und durch Platzierung von Hinweisreizen, die die Aktivierung des Neuen auslösen, gestaltbar. Der vorliegende Beitrag stellt die förderliche Wirkung von Hinweisreizen auf willentliches Vergessen dar, stellt sie im Rahmen des Berichts einer experimentellen Studie unter Beweis und gibt praktische Implikationen, wie für Individuen, Gruppen und Organisationen willentliches Vergessen gestaltet werden kann. N2 - This paper in the journal Gruppe. Interaktion. Organisation. illustrates how intentional forgetting can improve the adaptation to necessary changes for individuals, groups and organizations, and how intentional forgetting can be consciously and purposefully designed.In order for behavior to be adapted as aresult of necessary change, it is not enough for people to know what to do, to be willing and able to change their behavior. Achange succeeds only if the new behavior is activated and not the old one, if the old behavior is forgotten. The necessary process of intentional forgetting can be designed by removing cues that retrieve memory items to be forgotten and placing cues that trigger the retrieval of the new.This paper presents the beneficial effects of cues on intentional forgetting, proves them in the context of areport of an experimental study and gives practical implications on how to design intentional forgetting for individuals, groups and organizations. KW - Intentional forgetting KW - Retrieval cues KW - Change KW - Adaptation KW - Behavior KW - Willentliches Vergessen KW - Hinweisreize KW - Veränderung KW - Anpassung KW - Verhalten Y1 - 2019 U6 - https://doi.org/10.1007/s11612-019-00466-0 SN - 2366-6145 SN - 2366-6218 VL - 50 IS - 2 SP - 197 EP - 209 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Thim, Christof A1 - Gronau, Norbert A1 - Haase, Jennifer A1 - Grum, Marcus A1 - Schüffler, Arnulf A1 - Roling, Wiebke A1 - Kluge, Annette ED - Shishkov, Boris T1 - Modeling change in business processes T2 - Business modeling and software design N2 - Business processes are regularly modified either to capture requirements from the organization’s environment or due to internal optimization and restructuring. Implementing the changes into the individual work routines is aided by change management tools. These tools aim at the acceptance of the process by and empowerment of the process executor. They cover a wide range of general factors and seldom accurately address the changes in task execution and sequence. Furthermore, change is only framed as a learning activity, while most obstacles to change arise from the inability to unlearn or forget behavioural patterns one is acquainted with. Therefore, this paper aims to develop and demonstrate a notation to capture changes in business processes and identify elements that are likely to present obstacles during change. It connects existing research from changes in work routines and psychological insights from unlearning and intentional forgetting to the BPM domain. The results contribute to more transparency in business process models regarding knowledge changes. They provide better means to understand the dynamics and barriers of change processes. KW - intentional forgetting KW - routines KW - business processes KW - unlearning Y1 - 2023 SN - 978-3-031-36756-4 SN - 978-3-031-36757-1 U6 - https://doi.org/10.1007/978-3-031-36757-1_1 SP - 3 EP - 17 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Thim, Christof A1 - Roling, Wiebke A1 - Schüffler, Arnulf A1 - Kluge, Annette A1 - Gronau, Norbert ED - Masrour, Tawfik ED - El Hassani, Ibtissam ED - Barka, Noureddine T1 - AI case-based reasoning for artificial neural networks T2 - Artificial intelligence and industrial applications N2 - Faced with the triad of time-cost-quality, the realization of production tasks under economic conditions is not trivial. Since the number of Artificial-Intelligence-(AI)-based applications in business processes is increasing more and more nowadays, the efficient design of AI cases for production processes as well as their target-oriented improvement is essential, so that production outcomes satisfy high quality criteria and economic requirements. Both challenge production management and data scientists, aiming to assign ideal manifestations of artificial neural networks (ANNs) to a certain task. Faced with new attempts of ANN-based production process improvements [8], this paper continues research about the optimal creation, provision and utilization of ANNs. Moreover, it presents a mechanism for AI case-based reasoning for ANNs. Experiments clarify continuously improving ANN knowledge bases by this mechanism empirically. Its proof-of-concept is demonstrated by the example of four production simulation scenarios, which cover the most relevant use cases and will be the basis for examining AI cases on a quantitative level. KW - case-based reasoning KW - neural networks KW - industry 4.0 Y1 - 2023 SN - 978-3-031-43523-2 SN - 978-3-031-43524-9 U6 - https://doi.org/10.1007/978-3-031-43524-9_2 VL - 771 SP - 17 EP - 35 PB - Springer CY - Cham ER - TY - CHAP A1 - Teichmann, Malte A1 - Busse, Jana A1 - Gonnermann, Jana A1 - Reimann, Daniela A1 - Ritterbusch, Georg David A1 - Langemeyer, Ines A1 - Gronau, Norbert ED - Nitsch, Verena ED - Brandl, Christopher ED - Häußling, Roger ED - Roth, Philip ED - Gries, Thomas ED - Schmenk, Bernhard T1 - Konzeption, Erstellung und Evaluation von VR-Räumen für die betriebliche Weiterbildung in KMU BT - Erfahrungen und Handlungsempfehlungen aus dem Forschungsprojekt API-KMU T2 - Digitalisierung der Arbeitswelt im Mittelstand 3 N2 - Der Beitrag adressiert die Erstellung von Virtual-Reality gestützten (Lehr- und Lern-) Räumen für die betriebliche Weiterbildung im Rahmen eines Forschungsprojektes. Der damit verbundene Konzeptions- und Umsetzungsprozess ist mit verschiedenen Herausforderungen verbunden: einerseits ist Virtual-Reality ein vergleichsweise neues Lehr- und Lernmedium, womit wenig praktische Handreichungen zur praktischen Umsetzung existieren. Andererseits existieren theoretisch-konzeptionelle Ansätze zur Gestaltung digitaler Lehr- und Lernarrangements, die jedoch 1) oft Gefahr laufen, an den realen Bedürfnissen der Praxis „vorbei“ zu gehen und 2) zumeist nicht konkret Virtual-Reality bzw. damit verbundene Lehr- und Lernumgebungen adressieren. In dieser Folge sind Best-Practice Beispiele basierend auf erfolgreichen Umsetzungsvorhaben, die nachfolgenden Projekten als „Wegweiser“ dienen könnten, äußerst rar. Der Beitrag setzt an dieser Stelle an: basierend auf zwei real existierenden betrieblichen Anwendungsfällen aus den Bereichen Natursteinbearbeitung sowie Einzel- und Sondermaschinenbau werden Herausforderungen und Lösungswege des Erstellungsprozesses von Virtual-Reality gestützten (Lehr- und Lern-)Räumen beschrieben. Ebenfalls werden basierend auf den gemachten Projekterfahrungen Handlungsempfehlungen für die gelingende Konzeption, Umsetzung und Evaluation dieser Räume formuliert. Betriebliche Beschäftigte aus den Bereichen Aus- und Weiterbildung, Management oder Human Ressources, die in eigenen Projekten im Bereich Virtual Reality aktiv werden wollen, profitieren von den herausgestellten praktischen Handreichungen. Forschende Personen sollen Anregungen für weiterführende Forschungsvorhaben erhalten. Y1 - 2023 SN - 978-3-662-67023-1 SN - 978-3-662-67024-8 U6 - https://doi.org/10.1007/978-3-662-67024-8_5 SP - 155 EP - 204 PB - Springer Vieweg CY - Berlin ER - TY - CHAP A1 - Grum, Marcus A1 - Rapp, Simon A1 - Gronau, Norbert A1 - Albers, Albert ED - Shishkov, Boris T1 - Accelerating knowledge BT - the speed optimization of knowledge transfers T2 - Business modeling and software design N2 - As knowledge-intensive processes are often carried out in teams and demand for knowledge transfers among various knowledge carriers, any optimization in regard to the acceleration of knowledge transfers obtains a great economic potential. Exemplified with product development projects, knowledge transfers focus on knowledge acquired in former situations and product generations. An adjustment in the manifestation of knowledge transfers in its concrete situation, here called intervention, therefore can directly be connected to the adequate speed optimization of knowledge-intensive process steps. This contribution presents the specification of seven concrete interventions following an intervention template. Further, it describes the design and results of a workshop with experts as a descriptive study. The workshop was used to assess the practical relevance of interventions designed as well as the identification of practical success factors and barriers of their implementation. KW - knowledge transfers KW - business process optimization KW - interventions KW - product development KW - product generation engineering KW - empirical evaluation Y1 - 2019 SN - 978-3-030-24853-6 SN - 978-3-030-24854-3 U6 - https://doi.org/10.1007/978-3-030-24854-3_7 VL - 356 SP - 95 EP - 113 PB - Springer CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Klippert, Monika A1 - Albers, Albert A1 - Gronau, Norbert A1 - Thim, Christof T1 - Examining the quality of knowledge transfers BT - the draft of an empirical research T2 - Proceedings of the Design Society N2 - Already successfully used products or designs, past projects or our own experiences can be the basis for the development of new products. As reference products or existing knowledge, it is reused in the development process and across generations of products. Since further, products are developed in cooperation, the development of new product generations is characterized by knowledge-intensive processes in which information and knowledge are exchanged between different kinds of knowledge carriers. The particular knowledge transfer here describes the identification of knowledge, its transmission from the knowledge carrier to the knowledge receiver, and its application by the knowledge receiver, which includes embodied knowledge of physical products. Initial empirical findings of the quantitative effects regarding the speed of knowledge transfers already have been examined. However, the factors influencing the quality of knowledge transfer to increase the efficiency and effectiveness of knowledge transfer in product development have not yet been examined empirically. Therefore, this paper prepares an experimental setting for the empirical investigation of the quality of knowledge transfers. KW - knowledge management KW - new product development KW - evaluation Y1 - 2021 U6 - https://doi.org/10.1017/pds.2021.404 SN - 2732-527X VL - 1 SP - 1431 EP - 1440 PB - Cambridge University Press CY - Cambridge ER - TY - GEN A1 - Panzer, Marcel A1 - Bender, Benedict A1 - Gronau, Norbert T1 - A deep reinforcement learning based hyper-heuristic for modular production control T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - In nowadays production, fluctuations in demand, shortening product life-cycles, and highly configurable products require an adaptive and robust control approach to maintain competitiveness. This approach must not only optimise desired production objectives but also cope with unforeseen machine failures, rush orders, and changes in short-term demand. Previous control approaches were often implemented using a single operations layer and a standalone deep learning approach, which may not adequately address the complex organisational demands of modern manufacturing systems. To address this challenge, we propose a hyper-heuristics control model within a semi-heterarchical production system, in which multiple manufacturing and distribution agents are spread across pre-defined modules. The agents employ a deep reinforcement learning algorithm to learn a policy for selecting low-level heuristics in a situation-specific manner, thereby leveraging system performance and adaptability. We tested our approach in simulation and transferred it to a hybrid production environment. By that, we were able to demonstrate its multi-objective optimisation capabilities compared to conventional approaches in terms of mean throughput time, tardiness, and processing of prioritised orders in a multi-layered production system. The modular design is promising in reducing the overall system complexity and facilitates a quick and seamless integration into other scenarios. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 173 KW - production control KW - modular production KW - multi-agent system KW - deep reinforcement learning KW - deep learning KW - multi-objective optimisation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-605642 SN - 1867-5808 ER - TY - JOUR A1 - Panzer, Marcel A1 - Bender, Benedict A1 - Gronau, Norbert T1 - A deep reinforcement learning based hyper-heuristic for modular production control JF - International journal of production research N2 - In nowadays production, fluctuations in demand, shortening product life-cycles, and highly configurable products require an adaptive and robust control approach to maintain competitiveness. This approach must not only optimise desired production objectives but also cope with unforeseen machine failures, rush orders, and changes in short-term demand. Previous control approaches were often implemented using a single operations layer and a standalone deep learning approach, which may not adequately address the complex organisational demands of modern manufacturing systems. To address this challenge, we propose a hyper-heuristics control model within a semi-heterarchical production system, in which multiple manufacturing and distribution agents are spread across pre-defined modules. The agents employ a deep reinforcement learning algorithm to learn a policy for selecting low-level heuristics in a situation-specific manner, thereby leveraging system performance and adaptability. We tested our approach in simulation and transferred it to a hybrid production environment. By that, we were able to demonstrate its multi-objective optimisation capabilities compared to conventional approaches in terms of mean throughput time, tardiness, and processing of prioritised orders in a multi-layered production system. The modular design is promising in reducing the overall system complexity and facilitates a quick and seamless integration into other scenarios. KW - production control KW - modular production KW - multi-agent system KW - deep reinforcement learning KW - deep learning KW - multi-objective optimisation Y1 - 2023 U6 - https://doi.org/10.1080/00207543.2023.2233641 SN - 0020-7543 SN - 1366-588X SN - 0278-6125 SP - 1 EP - 22 PB - Taylor & Francis CY - London ER - TY - BOOK A1 - Gronau, Norbert T1 - Knowledge Modeling and Description Language (KMDL) 3.0 BT - an introduction into the creation of knowledge-intensive business processes Y1 - 2024 SN - 978-3-95545-416-6 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Adelhelm, Silvia A1 - Braun, Andreas A1 - Gronau, Norbert A1 - Lürig, Detlef A1 - Müller, Elisabeth A1 - Vladova, Gergana A1 - Wagner, Dieter T1 - Mit Open Innovation zum Erfolg BT - So verbessern mittelständische Pharmaunternehmen ihre Innovationsprozesse JF - Handbuch prozessorientiertes Wissensmanagment Y1 - 2014 SN - 978-3-95545-026-7 SP - 211 EP - 226 PB - GITO CY - Berlin ER - TY - JOUR A1 - Ullrich, André A1 - Vladova, Gergana A1 - Marquart, Danny A1 - Braun, Andreas A1 - Gronau, Norbert T1 - An overwiew of benefits and risks in open innovation projects and the influence of intermediary participation, decision-making authority, experience, and position on their perception JF - International journal of innovation management : IJIM N2 - This paper presents an exploratory study investigating the influence of the factors (1) intermediary participation, (2) decision-making authority, (3) position in the enterprise, and (4) experience in open innovation on the perception and assessment of the benefits and risks expected from participating in open innovation projects. For this purpose, an online survey was conducted in Germany, Austria and Switzerland. The result of this paper is an empirical evidence showing whether and how these factors affect the perception of potential benefits and risks expected within the context of open innovation project participation. Furthermore, the identified effects are discussed against the theory. Existing theory regarding the benefits and risks of open innovation is expanded by (1) finding that they are perceived mostly independently of the factors, (2) confirming the practical relevance of benefits and risks, and (3) enabling a finer distinction between their degrees of relevance according to respective contextual specifics. KW - Open innovation KW - intermediaries KW - benefits KW - decision-making KW - experience; KW - risks Y1 - 2022 U6 - https://doi.org/10.1142/S1363919622500128 SN - 1363-9196 SN - 1757-5877 VL - 26 IS - 02 PB - World Scientific Publ. CY - Singapore ER - TY - JOUR A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - https://doi.org/10.30844/IM_23-2_11-14 SN - 2364-9208 VL - 39 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag CY - Berlin ER - TY - GEN A1 - Bender, Benedict A1 - Habib, Natalie A1 - Gronau, Norbert T1 - Digitale Plattformen BT - Strategien für KMU T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Obwohl digitale Plattformen vornehmlich von Großunternehmen betrieben werden, bieten sie klein- und mittelständischen Unternehmen (KMU) Potenziale zur Verbreitung innovativer Technologien und für den Ausbau ihres Geschäftsmodells. Für die Umsetzung digitaler Plattformen stehen Unternehmen mehrere Strategien zur Verfügung. Der Beitrag vergleicht und bewertet grundlegende Strategien am Beispiel eines Maschinenbauunternehmens. Die Ergebnisse dienen als Grundlage für die Entscheidungsfindung von KMU. KW - Digitale Plattformen KW - KMU KW - Strategie KW - Geschäftsmodell KW - Industrie 4.0 KW - Maschinen- und Anlagenbau Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-605419 SN - 1867-5808 IS - 1 ER - TY - GEN A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 183 KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-604510 SN - 2364-9208 SN - 1867-5808 IS - 2 ER - TY - CHAP A1 - Gonnermann, Jana A1 - Brandenburger, Bonny A1 - Vladova, Gergana A1 - Gronau, Norbert ED - Bui, Tung X. T1 - To what extent can individualisation in terms of different types of mode improve learning outcomes and learner satisfaction? BT - a pre-study T2 - Proceedings of the 56th Annual Hawaii International Conference on System Sciences January 3-6, 2023 N2 - With the latest technological developments and associated new possibilities in teaching, the personalisation of learning is gaining more and more importance. It assumes that individual learning experiences and results could generally be improved when personal learning preferences are considered. To do justice to the complexity of the personalisation possibilities of teaching and learning processes, we illustrate the components of learning and teaching in the digital environment and their interdependencies in an initial model. Furthermore, in a pre-study, we investigate the relationships between the learner's ability to (digital) self-organise, the learner’s prior- knowledge learning in different variants of mode and learning outcomes as one part of this model. With this pre-study, we are taking the first step towards a holistic model of teaching and learning in digital environments. KW - advances in teaching and learning technologies KW - digital learning KW - digital teaching KW - experimental design KW - personalised learning KW - teaching and learning model Y1 - 2023 SN - 978-0-9981331-6-4 SP - 123 EP - 132 PB - Department of IT Management Shidler College of Business University of Hawaii CY - Honolulu, HI ER - TY - GEN A1 - Panzer, Marcel A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Neural agent-based production planning and control BT - an architectural review T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Nowadays, production planning and control must cope with mass customization, increased fluctuations in demand, and high competition pressures. Despite prevailing market risks, planning accuracy and increased adaptability in the event of disruptions or failures must be ensured, while simultaneously optimizing key process indicators. To manage that complex task, neural networks that can process large quantities of high-dimensional data in real time have been widely adopted in recent years. Although these are already extensively deployed in production systems, a systematic review of applications and implemented agent embeddings and architectures has not yet been conducted. The main contribution of this paper is to provide researchers and practitioners with an overview of applications and applied embeddings and to motivate further research in neural agent-based production. Findings indicate that neural agents are not only deployed in diverse applications, but are also increasingly implemented in multi-agent environments or in combination with conventional methods — leveraging performances compared to benchmarks and reducing dependence on human experience. This not only implies a more sophisticated focus on distributed production resources, but also broadening the perspective from a local to a global scale. Nevertheless, future research must further increase scalability and reproducibility to guarantee a simplified transfer of results to reality. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 172 KW - production planning and control KW - machine learning KW - neural networks KW - systematic literature review KW - taxonomy Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-604777 SN - 1867-5808 ER - TY - JOUR A1 - Panzer, Marcel A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Neural agent-based production planning and control BT - an architectural review JF - Journal of Manufacturing Systems N2 - Nowadays, production planning and control must cope with mass customization, increased fluctuations in demand, and high competition pressures. Despite prevailing market risks, planning accuracy and increased adaptability in the event of disruptions or failures must be ensured, while simultaneously optimizing key process indicators. To manage that complex task, neural networks that can process large quantities of high-dimensional data in real time have been widely adopted in recent years. Although these are already extensively deployed in production systems, a systematic review of applications and implemented agent embeddings and architectures has not yet been conducted. The main contribution of this paper is to provide researchers and practitioners with an overview of applications and applied embeddings and to motivate further research in neural agent-based production. Findings indicate that neural agents are not only deployed in diverse applications, but are also increasingly implemented in multi-agent environments or in combination with conventional methods — leveraging performances compared to benchmarks and reducing dependence on human experience. This not only implies a more sophisticated focus on distributed production resources, but also broadening the perspective from a local to a global scale. Nevertheless, future research must further increase scalability and reproducibility to guarantee a simplified transfer of results to reality. KW - production planning and control KW - machine learning KW - neural networks KW - systematic literature review KW - taxonomy Y1 - 2022 U6 - https://doi.org/10.1016/j.jmsy.2022.10.019 SN - 0278-6125 SN - 1878-6642 VL - 65 SP - 743 EP - 766 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Bender, Benedict A1 - Gronau, Norbert ED - Bui, Tung T1 - Introduction to the Minitrack on towards the future of enterprise systems T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Enterprise systems have long played an important role in businesses of various sizes. With the increasing complexity of today’s business relationships, pecialized application systems are being used more and more. Moreover, emerging technologies such as artificial intelligence are becoming accessible for enterprise systems. This raises the question of the future role of enterprise systems. This minitrack covers novel ideas that contribute to and shape the future role of enterprise systems with five contributions. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 188 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-605406 SN - 978-0-9981331-5-7 SN - 1867-5808 ER - TY - JOUR A1 - Bender, Benedict A1 - Habib, Natalie A1 - Gronau, Norbert T1 - Digitale Plattformen BT - Strategien für KMU JF - Wirtschaftsinformatik und Management N2 - Obwohl digitale Plattformen vornehmlich von Großunternehmen betrieben werden, bieten sie klein- und mittelständischen Unternehmen (KMU) Potenziale zur Verbreitung innovativer Technologien und für den Ausbau ihres Geschäftsmodells. Für die Umsetzung digitaler Plattformen stehen Unternehmen mehrere Strategien zur Verfügung. Der Beitrag vergleicht und bewertet grundlegende Strategien am Beispiel eines Maschinenbauunternehmens. Die Ergebnisse dienen als Grundlage für die Entscheidungsfindung von KMU. KW - Digitale Plattformen KW - KMU KW - Strategie KW - Geschäftsmodell KW - Industrie 4.0 KW - Maschinen- und Anlagenbau Y1 - 2020 U6 - https://doi.org/10.1365/s35764-020-00292-w SN - 1867-5913 SN - 1867-5905 VL - 13 IS - 1 SP - 68 EP - 76 PB - Gabler CY - Wiesbaden ER - TY - JOUR A1 - Grum, Marcus A1 - Hiessl, Werner A1 - Maresch, Karl A1 - Gronau, Norbert T1 - Design of a neuronal training modeling language BT - exemplified with the AI-based dynamic GUI adaption JF - AIS-Transactions on enterprise systems N2 - As the complexity of learning task requirements, computer infrastruc- tures and knowledge acquisition for artificial neuronal networks (ANN) is in- creasing, it is challenging to talk about ANN without creating misunderstandings. An efficient, transparent and failure-free design of learning tasks by models is not supported by any tool at all. For this purpose, particular the consideration of data, information and knowledge on the base of an integration with knowledge- intensive business process models and a process-oriented knowledge manage- ment are attractive. With the aim of making the design of learning tasks express- ible by models, this paper proposes a graphical modeling language called Neu- ronal Training Modeling Language (NTML), which allows the repetitive use of learning designs. An example ANN project of AI-based dynamic GUI adaptation exemplifies its use as a first demonstration. KW - AI and business informatics KW - development of AI-based systems KW - AI-based decision support system KW - cooperative AI (human-in-the-loop) KW - process-oriented knowledge acquisition KW - modeling language Y1 - 2021 UR - https://www.aes-journal.com/index.php/ais-tes/article/view/20/18 U6 - https://doi.org/10.30844/aistes.v5i1.20 SN - 1867-7134 VL - 5 IS - 1 PB - GITO-Publ., Verl. für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - JOUR A1 - Bender, Benedict A1 - Korjahn, Nicolas A1 - Gronau, Norbert T1 - Erfolgreich auf Handelsplattformen BT - Einblicke in die Marktstudie Handelsplattformen 2023/2024 JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Obwohl Handelsplattformen zunehmend an Bedeutung gewinnen, besteht im deutschsprachigen Raum ein Mangel an umfassenden Marktübersichten. Dadurch fehlt es Verkäufern, potenziellen Plattformbetreibern und Kunden an einer soliden Grundlage für fundierte Entscheidungen. Das ändern wir mit folgendem Beitrag. Erfahren Sie hier das Wichtigste über den rasant wachsenden Markt der Handelsplattformen. Y1 - 2024 UR - https://www.wiso-net.de/document/ERP__714baef53e6bcc9690fd3c7c72605cc171f35f62 UR - https://erp-management.de/artikel/erfolgreich-auf-handelsplattformen/ SN - 1860-6725 VL - 20 IS - 1 SP - 76 EP - 82 PB - GITO mbH - Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - CHAP A1 - Rojahn, Marcel A1 - Gronau, Norbert ED - Bui, Tung X. T1 - Openness indicators for the evaluation of digital platforms between the launch and maturity phase T2 - Proceedings of the 57th Annual Hawaii International Conference on System Sciences N2 - In recent years, the evaluation of digital platforms has become an important focus in the field of information systems science. The identification of influential indicators that drive changes in digital platforms, specifically those related to openness, is still an unresolved issue. This paper addresses the challenge of identifying measurable indicators and characterizing the transition from launch to maturity in digital platforms. It proposes a systematic analytical approach to identify relevant openness indicators for evaluation purposes. The main contributions of this study are the following (1) the development of a comprehensive procedure for analyzing indicators, (2) the categorization of indicators as evaluation metrics within a multidimensional grid-box model, (3) the selection and evaluation of relevant indicators, (4) the identification and assessment of digital platform architectures during the launch-to-maturity transition, and (5) the evaluation of the applicability of the conceptualization and design process for digital platform evaluation. KW - federated industrial platform ecosystems KW - technologies KW - business models KW - data-driven artifacts KW - design-science research KW - digital platform openness KW - evaluation KW - morphological analysis Y1 - 2024 SN - 978-0-99813-317-1 SP - 4516 EP - 4525 PB - Department of IT Management Shidler College of Business University of Hawaii CY - Honolulu, HI ER -