TY - JOUR A1 - Vladova, Gergana A1 - Wotschack, Philip A1 - Lareiro, Patricia de Paiva A1 - Gronau, Norbert A1 - Thim, Christof T1 - Lernen mit Assistenzsystemen T1 - Learning with assistance systems BT - vor lauter Aufgaben den Prozess nicht sehen? BT - not seeing the process for the tasks? JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Der Beitrag beschreibt die Konzeption und Durchführung und bietet einen Einblick in die ersten Ergebnisse einer Untersuchung mit experimentellem Design in einer simulierten Prozessumgebung im Forschungs- und Anwendungszentrum Industrie 4.0 in Potsdam. Im Mittelpunkt stehen Anlernprozesse im Bereich der Einfacharbeit (Helfertätigkeiten) und ihre Gestaltung durch den Einsatz digitaler Assistenzsysteme. In der Arbeitsforschung finden sich Hinweise darauf, dass mit dem Einsatz dieser Systeme Prozesswissen verloren geht, im Sinne einer guten Kenntnis des gesamten Arbeitsprozesses, in den die einzelnen Tätigkeiten eingebettet sind. Das kann sich als Problem erweisen, vor allem wenn unvorhersehbare Situationen oder Fehler eintreten. Um die Rolle von Prozesswissen beim Einsatz von digitalen Assistenzsystemen zu untersuchen, wird im Experiment eine echte Fabriksituation simuliert. Die Probanden werden über ein Assistenzsystem Schritt für Schritt in ihre Aufgabentätigkeit angelernt, einem Teil der Probanden wird allerdings am Anfang zusätzlich Prozesswissen im Rahmen einer kurzen Schulung vermittelt. N2 - The paper describes the conception and implementation as well as offers an insight into the first results of a study with experimental design in a simulated process environment at the Research and Application Center Industry 4.0 in Potsdam. The focus is on learning processes in the field of simple work and their organization through the use of digital assistance systems. In labour research, there are indications that process knowledge is lost with the use of these systems, in the sense of a good knowledge of the entire work process in which the individual activities are embedded. To investigate the role of process knowledge in the use of digital assistance systems, a real factory situation is simulated in the experiment. KW - Assistenzsysteme KW - Industrie 4.0 KW - Prozesswissen KW - Lernfabrik KW - assistance systems KW - industry 4.0 KW - process knowledge KW - learning factory Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-3_S16-20 SN - 2364-9208 VL - 36 IS - 3 SP - 16 EP - 20 PB - GITO mbH Verlag CY - Berlin ER - TY - CHAP A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert ED - Reis, Arsénio ED - Barroso, João ED - Lopes, J. Bernardino ED - Mikropoulos, Tassos ED - Fan, Chih-Wen T1 - Yes, we can (?) BT - a critical review of the COVID-19 semester T2 - Technology and innovation in learning, teaching and education : second international conference, TECH-EDU 2020, Vila Real, Portugal, December 2-4, 2020 : proceedings N2 - The COVID-19 crisis has caused an extreme situation for higher education institutions around the world, where exclusively virtual teaching and learning has become obligatory rather than an additional supporting feature. This has created opportunities to explore the potential and limitations of virtual learning formats. This paper presents four theses on virtual classroom teaching and learning that are discussed critically. We use existing theoretical insights extended by empirical evidence from a survey of more than 850 students on acceptance, expectations, and attitudes regarding the positive and negative aspects of virtual teaching. The survey responses were gathered from students at different universities during the first completely digital semester (Spring-Summer 2020) in Germany. We discuss similarities and differences between the subjects being studied and highlight the advantages and disadvantages of virtual teaching and learning. Against the background of existing theory and the gathered data, we emphasize the importance of social interaction, the combination of different learning formats, and thus context-sensitive hybrid learning as the learning form of the future. KW - COVID-19 KW - higher education KW - virtual learning KW - digital learning KW - subject differences Y1 - 2021 SN - 978-3-030-73987-4 SN - 978-3-030-73988-1 U6 - https://doi.org/10.1007/978-3-030-73988-1_17 SP - 225 EP - 235 PB - Springer CY - Cham ER - TY - JOUR A1 - Vladova, Gergana A1 - Gronau, Norbert T1 - KI-basierte Assistenzsysteme in betrieblichen Lernprozessen JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Assistenzsysteme finden im Kontext der digitalen Transformation immer mehr Einsatz. Sie können Beschäftigte in industriellen Produktionsprozessen sowohl in der Anlern- als auch in der aktiven Arbeitsphase unterstützen. Kompetenzen können so arbeitsplatz- und prozessnah sowie bedarfsorientiert aufgebaut werden. In diesem Beitrag wird der aktuelle Forschungsstand zu den Einsatzmöglichkeiten dieser Assistenzsysteme diskutiert und mit Beispielen illustriert. Es werden unter anderem auch Herausforderungen für den Einsatz aufgezeigt. Am Ende des Beitrags werden Potenziale für die zukünftige Nutzung von AS in industriellen Lernprozessen und für die Forschung identifiziert. KW - KI KW - kognitive Assistenzsysteme KW - betriebliche Lernprozesse KW - Weiterbildung Y1 - 2022 U6 - https://doi.org/10.30844/I40M_22-2_11-14 SN - 2364-9216 SN - 2364-9208 VL - 38 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - JOUR A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - https://doi.org/10.30844/IM_23-2_11-14 SN - 2364-9208 VL - 39 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag CY - Berlin ER - TY - GEN A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 183 KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-604510 SN - 2364-9208 SN - 1867-5808 IS - 2 ER - TY - JOUR A1 - Ullrich, André A1 - Teichmann, Malte A1 - Gronau, Norbert T1 - Fast trainable capabilities in software engineering-skill development in learning factories JF - Ji suan ji jiao yu = Computer Education / Qing hua da xue N2 - The increasing demand for software engineers cannot completely be fulfilled by university education and conventional training approaches due to limited capacities. Accordingly, an alternative approach is necessary where potential software engineers are being educated in software engineering skills using new methods. We suggest micro tasks combined with theoretical lessons to overcome existing skill deficits and acquire fast trainable capabilities. This paper addresses the gap between demand and supply of software engineers by introducing an actionoriented and scenario-based didactical approach, which enables non-computer scientists to code. Therein, the learning content is provided in small tasks and embedded in learning factory scenarios. Therefore, different requirements for software engineers from the market side and from an academic viewpoint are analyzed and synthesized into an integrated, yet condensed skills catalogue. This enables the development of training and education units that focus on the most important skills demanded on the market. To achieve this objective, individual learning scenarios are developed. Of course, proper basic skills in coding cannot be learned over night but software programming is also no sorcery. KW - learning factory KW - programming skills KW - software engineering KW - training Y1 - 2021 U6 - https://doi.org/10.16512/j.cnki.jsjjy.2020.12.002 SN - 1672-5913 IS - 12 SP - 2 EP - 10 PB - [Verlag nicht ermittelbar] CY - Bei jing shi ER - TY - JOUR A1 - Ullrich, André A1 - Gronau, Norbert T1 - Bestimmung nachhaltiger Anwendungssystemarchitekturen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die teilweise sehr kurzfristig notwendige Reaktion auf Veränderungen erfordert von Unternehmen ein hohes Maß an Flexibilität und Reaktionsgeschwindigkeit. Anwendungssystemarchitekturen, die im Wesentlichen aus alten und selbst entwickelten Systemen bestehen, erfüllen häufig diese Anforderungen nicht. Investitionsmittel für neue Software sind jedoch begrenzt, daher müssen Prioritäten in der Ablösung von Altsystemen gesetzt werden. Eine effiziente Analysemethode zur Planung der Erneuerung der Anwendungssystemlandschaft stellt die Wandlungsfähigkeitsanalyse dar. Dieser Beitrag beschreibt Vorgehen und Ergebnisse am Beispiel eines international tätigen Automobilzulieferers. N2 - The sometimes necessary reaction to changes requires a high degree of adaptability and speed of reaction from companies. Application system architectures, which essentially consist of old and self-developed systems, often do not meet these requirements. However, investment funds for new software are limited, so priorities must be set in the replacement of old systems. An efficient analysis method for planning the renewal of the application system landscape is the adaptability analysis. This article describes the procedure and results using the example of an internationally active automotive supplier. KW - Anpassungsfähigkeit KW - Anwendungssystemarchitekturen KW - Bewertung KW - adaptability KW - application system architectures KW - assessment Y1 - 2020 UR - https://www.wiso-net.de/document/ERP__1ba9f709bedd19d76acba5daebbc08c9befe5b9f U6 - https://doi.org/10.30844/ERP_20-1_54-57 SN - 1860-6725 VL - 16 IS - 1 SP - 54 EP - 57 PB - GITO mbH CY - Berlin ER - TY - CHAP A1 - Ullrich, André A1 - Gronau, Norbert ED - Panetto, Hervé ED - Madani, Kurosh ED - Smirnov, Alexander T1 - Time to change BT - considering the 4th Industrial Revolution from three sustainability perspectives T2 - Proceedings of the International Conference on Innovative Intelligent Industrial Production and Logistics N2 - Industry 4.0 leads to a radical change that is progressing incrementally. The new information and communication technologies provide many conceivable opportunities for their application in the context of sustainable corporate management. The combination of new digital technologies with the ecological and social goals of companies offers a multitude of unimagined potentials and challenges. Although companies already see the need for action, there was in the past and currently still is a lack of concrete measures that lever the potential of Industry 4.0 for sustainability management. During the course of this position paper we develop six theses (two from each sustainability perspective) against the background of the current situation in research and practice, and policy. KW - industry 4.0 KW - sustainability KW - triple bottom line Y1 - 2020 SN - 978-989-758-476-3 U6 - https://doi.org/10.5220/0010148601090116 SP - 109 EP - 116 PB - SciTePress CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Gronau, Norbert T1 - Process model driven learning scenario implementation JF - Procedia manufacturing N2 - The implementation of learning scenarios is a diversely challenging, frequently purely manual and effortful undertaking. In this contribution a process based view is used in scenario generation to overcome communication, coordination and technical gaps. A framework is provided to identify, define and integrate technological artefacts and learning content as modular, reusable building blocks along a modeled production process. The specific contribution is twofold: 1) the theoretical framework represents a unique basis for modularization of content and technology in order to enhance reusability, 2) the model based scenario definition is a starting point for automated implementation of learning scenarios in industrial learning environments that has not been created before. KW - learning factories KW - learning scenario implementation KW - process modelling Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.071 SN - 2351-9789 VL - 45 SP - 522 EP - 527 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Eigelshoven, Felix A1 - Gronau, Norbert A1 - Ritter, Ann-Carolin T1 - Crowdsourcing bei industriellen Innovationen T1 - Crowdsourcing for industrial innovations BT - Lösungsansätze und Herausforderung für KMU BT - solutions and challenges for SMEs JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Innovationstätigkeit im industriellen Umfeld verlagert sich durch die Digitalisierung hin zu Produkt-Service-Systemen. Kleine und mittlere Unternehmen haben sich in ihrer Entwicklungstätigkeit bisher stark auf die Produktentwicklung bezogen. Der Umstieg auf „smarte“ Produkte und die Kopplung an Dienstleistungen erfordert häufig personelle und finanzielle Ressourcen, welche KMU nicht aufbringen können. Crowdsourcing stellt eine Möglichkeit dar, den Innovationsprozess für externe Akteure zu öffnen und Kosten- sowie Geschwindigkeitsvorteile zu realisieren. Bei der Integration von Crowdsourcing-Elementen ist jedoch einigen Herausforderungen zu begegnen. Dieser Beitrag zeigt sowohl die Potenziale als auch die Barrieren einer Crowdsourcing-Nutzung im industriellen Umfeld auf. N2 - Innovation activity in the industrial environment is shifting towards product-service systems as a result of digitalisation. Small and medium-sized enterprises have so far focused their development activities strongly on product development. The switch to “smart” products and the coupling to services often requires personnel and financial resources that SMEs cannot provide. Crowdsourcing is one way of opening up the innovation process to external actors and realising cost and speed advantages. However, the integration of crowdsourcing elements faces several challenges. This article shows both the potentials and the barriers of crowdsourcing in the industrial environment. KW - Crowdsourcing KW - industrielle Innovationen KW - KMU KW - industrial innovation KW - SMEs Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-6_S9-13 SN - 2364-9208 VL - 36 IS - 6 SP - 9 EP - 13 PB - GITO mbH Verlag CY - Berlin ER -