TY - JOUR A1 - Khattari, Z. A1 - Ruschel, Y. A1 - Wen, H. Z. A1 - Fischer, Anna A1 - Fischer, T. M. T1 - Compactification of a myelin mimetic Langmuir monolayer upon adsorption and unfolding of myelin basic protein N2 - The surface shear viscosity of a myelin mimetic Langmuir monolayer is investigated upon adsorption of myelin basic protein (MBP). We measure an increase of the surface shear viscosity at picomolar concentrations of the protein, suggesting that the globular conformation of MBP changes upon adsorption at the monolayer. The conformational change enables hydrodynamic interactions of the proteins, with a typical separation of hundreds of nanometers. This unfolding is essential for the compactification of the myelin sheath, serving an enhanced saltatory signal transduction in vertebrates. The viscometry used extends the sensitivity of standard surface viscometers toward lower viscosities Y1 - 2005 SN - 1520-6106 ER - TY - JOUR A1 - Neumann, Bettina A1 - Kielb, Patrycja A1 - Rustam, Lina A1 - Fischer, Anna A1 - Weidinger, Inez M. A1 - Wollenberger, Ulla T1 - Bioelectrocatalytic Reduction of Hydrogen Peroxide by Microperoxidase-11 Immobilized on Mesoporous Antimony-Doped Tin Oxide JF - ChemElectrChem N2 - The heme-undecapeptide microperoxidase-11 (MP-11) was immobilized on mesoporous antimony-doped tin oxide (ATO) thin-film electrodes modified with the positively charged binding promotor polydiallyldimethylammonium chloride. Surface concentrations of MP-11 of 1.5 nmol cm(-2) were sufficiently high to enable spectroelectrochemical analyses. UV/Vis spectroscopy and resonance Raman spectroscopy revealed that immobilized MP-11 adopts a six-coordinated low-spin conformation, as in solution in the presence of a polycation. Cathodic reduction of hydrogen peroxide at potentials close to +500mV versus Ag/AgCl indicates that the reaction proceeds via a Compound I-type like intermediate, analogous to natural peroxidases, and confirms mesoporous ATO as a suitable host material for adsorbing the heme-peptide in its native state. A hydrogen peroxide sensor is proposed by using the bioelectrocatalytic properties of the MP-11-modified ATO. KW - electrochemistry KW - enzyme catalysis KW - mesoporous materials KW - microperoxidase KW - spectroelectrochemistry Y1 - 2017 U6 - https://doi.org/10.1002/celc.201600776 SN - 2196-0216 VL - 4 IS - 4 SP - 913 EP - 919 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Frasca, Stefano A1 - Milan, Anabel Molero A1 - Guiet, Amandine A1 - Goebel, Caren A1 - Perez-Caballero, Fernando A1 - Stiba, Konstanze A1 - Leimkühler, Silke A1 - Fischer, Anna A1 - Wollenberger, Ursula T1 - Bioelectrocatalysis at mesoporous antimony doped tin oxide electrodes-Electrochemical characterization and direct enzyme communication JF - ELECTROCHIMICA ACTA N2 - In this paper we report immobilization and bioelectrocatalysis of human sulfite oxidase (hSO) on nanostructured antimony doped tin oxide (ATO) thin film electrodes. Two types of ATO thin film electrodes were prepared via evaporation induced self-assembly of ATO nanoparticle sols. The use of a porogen results in different porosity and film thickness. Nevertheless both electrode types reveal similar quasi reversible electrochemical behavior for positive and negatively charged small mediators. Facile and durable immobilization of catalytically active enzyme in a direct electron transfer configuration was achieved without further chemical modification of the ATO surfaces. Interestingly, the binding of hSO onto the ATO surface seems to be not only of electrostatic nature, but also originates from a strong interaction between the histidine-tag of the enzyme and the supporting material. This is suggested from stable sulfite dependent bioelectrocatalytic signals at high ionic strength and imidazole desorption experiments. As such, ATO appears as a promising conductive platform for the immobilization of complex enzymes and their application in bioelectrocatalysis. (C) 2013 Elsevier Ltd. All rights reserved. KW - Antimony doped tin dioxide KW - Sulfite oxidase KW - Direct electrochemistry KW - Biosensor KW - Bioelectrocatalysis Y1 - 2013 U6 - https://doi.org/10.1016/j.electacta.2013.03.144 SN - 0013-4686 SN - 1873-3859 VL - 110 IS - 2 SP - 172 EP - 180 PB - PERGAMON-ELSEVIER SCIENCE LTD CY - OXFORD ER - TY - JOUR A1 - Sivanesan, Arumugam A1 - Kalaivani, Govindasamy A1 - Fischer, Anna A1 - Stiba, Konstanze A1 - Leimkühler, Silke A1 - Weidinger, Inez M. T1 - Complementary surface-enhanced resonance raman Spectroscopic Biodetection of mixed protein solutions by Chitosan- and Silica-Coated Plasmon-Tuned Silver Nanoparticles JF - Analytical chemistry N2 - Silver nanoparticles with identical plasmonic properties but different surface functionalities are synthesized and tested as chemically selective surface-enhanced resonance Raman (SERR) amplifiers in a two-component protein solution. The surface plasmon resonances of the particles are tuned to 413 nm to match the molecular resonance of protein heme cofactors. Biocompatible functionalization of the nanoparticles with a thin film of chitosan yields selective SERR enhancement of the anionic protein cytochrome b(5), whereas functionalization with SiO2 amplifies only the spectra of the cationic protein cytochrome c. As a result, subsequent addition of the two differently functionalized particles yields complementary information on the same mixed protein sample solution. Finally, the applicability of chitosan-coated Ag nanoparticles for protein separation was tested by in situ resonance Raman spectroscopy. Y1 - 2012 U6 - https://doi.org/10.1021/ac301001a SN - 0003-2700 VL - 84 IS - 13 SP - 5759 EP - 5764 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Yarman, Aysu A1 - Nagel, Thomas A1 - Gajovic-Eichelmann, Nenad A1 - Fischer, Anna A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Bioelectrocatalysis by Microperoxidase-11 in a Multilayer Architecture of Chitosan Embedded Gold Nanoparticles JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - We report on the redox behaviour of the microperoxidase-11 (MP-11) which has been electrostatically immobilized in a matrix of chitosan-embedded gold nanoparticles on the surface of a glassy carbon electrode. MP-11 contains a covalently bound heme c as the redox active group that exchanges electrons with the electrode via the gold nanoparticles. Electroactive surface concentration of MP-11 at high scan rate is between 350+/-50 pmol cm(-2), which reflects a multilayer process. The formal potential (E degrees') of MP-11 in the gold nanoparticles-chitosan film was estimated to be -(267.7+/-2.9) mV at pH 7.0. The heterogeneous electron transfer rate constant (k(s)) starts at 1.21 s(-1) and levels off at 6.45 s(-1) in the scan rate range from 0.1 to 2.0 V s(-1). Oxidation and reduction of MP-11 by hydrogen peroxide and superoxide, respectively have been coupled to the direct electron transfer of MP-11. KW - Microperoxidase KW - Direct electron transfer KW - Nanoparticles KW - Hydrogen peroxide KW - Superoxide KW - Bioelectrocatalysis Y1 - 2011 U6 - https://doi.org/10.1002/elan.201000535 SN - 1040-0397 VL - 23 IS - 3 SP - 611 EP - 618 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Guiet, Amandine A1 - Goebel, Caren A1 - Klingan, Katharina A1 - Lublow, Michael A1 - Reier, Tobias A1 - Vainio, Ulla A1 - Kraehnert, Ralph A1 - Schlaad, Helmut A1 - Strasser, Peter A1 - Zaharieva, Ivelina A1 - Dau, Holger A1 - Driess, Matthias A1 - Polte, Joerg A1 - Fischer, Anna T1 - Hydrophobic Nanoreactor Soft-Templating: A Supramolecular Approach to Yolk@Shell Materials JF - Advanced functional materials N2 - Due to their unique morphology-related properties, yolk@shell materials are promising materials for catalysis, drug delivery, energy conversion, and storage. Despite their proven potential, large-scale applications are however limited due to demanding synthesis protocols. Overcoming these limitations, a simple soft-templated approach for the one-pot synthesis of yolk@shell nanocomposites and in particular of multicore metal nanoparticle@metal oxide nanostructures (M-NP@MOx) is introduced. The approach here, as demonstrated for Au-NP@ITOTR (ITOTR standing for tin-rich ITO), relies on polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) inverse micelles as two compartment nanoreactor templates. While the hydrophilic P4VP core incorporates the hydrophilic metal precursor, the hydrophobic PS corona takes up the hydrophobic metal oxide precursor. As a result, interfacial reactions between the precursors can take place, leading to the formation of yolk@shell structures in solution. Once calcined these micelles yield Au-NP@ITOTR nanostructures, composed of multiple 6 nm sized Au NPs strongly anchored onto the inner surface of porous 35 nm sized ITOTR hollow spheres. Although of multicore nature, only limited sintering of the metal nanoparticles is observed at high temperatures (700 degrees C). In addition, the as-synthesized yolk@shell structures exhibit high and stable activity toward CO electrooxidation, thus demonstrating the applicability of our approach for the design of functional yolk@shell nanocatalysts. KW - inverse micelles KW - nanoreactor KW - polystyrene-block-poly(4-vinylpyridine) KW - soft-templating KW - tin-rich ITO KW - yolk@shell materials Y1 - 2015 U6 - https://doi.org/10.1002/adfm.201502388 SN - 1616-301X SN - 1616-3028 VL - 25 IS - 39 SP - 6228 EP - 6240 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Guiet, Amandine A1 - Unmüssig, Tobias A1 - Göbel, Caren A1 - Vainio, Ulla A1 - Wollgarten, Markus A1 - Driess, Matthias A1 - Schlaad, Helmut A1 - Polte, Jörg A1 - Fischer, Anna T1 - Yolk@Shell Nanoarchitectures with Bimetallic Nanocores - Synthesis and Electrocatalytic Applications JF - Earth & planetary science letters KW - AgAu alloy nanoparticles KW - tin-rich ITO KW - yolk@shell materials KW - nanoreactor KW - soft-templating KW - inverse micelles KW - polystyrene-block-poly(4-vinylpyridine) Y1 - 2016 U6 - https://doi.org/10.1021/acsami.6b06595 SN - 1944-8244 VL - 8 SP - 28019 EP - 28029 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Fischer, Anna T1 - "Reactive hard templating" : from carbon nitrides to metal nitrides T1 - Synthese von Metallnitrid Nanostrukturen durch "Reaktives Hardtemplating" N2 - Nanostructured inorganic materials are routinely synthesized by the use of templates. Depending on the synthesis conditions of the product material, either “soft” or “hard” templates can be applied. For sol-gel processes, usually “soft” templating techniques are employed, while “hard” templates are used for high temperature synthesis pathways. In classical templating approaches, the template has the unique role of structure directing agent, in the sense that it is not participating to the chemical formation of the resulting material. This work investigates a new templating pathway to nanostructured materials, where the template is also a reagent in the formation of the final material. This concept is described as “reactive templating” and opens a synthetic path toward materials which cannot be synthesised on a nanometre scale by classical templating approaches. Metal nitrides are such kind of materials. They are usually produced by the conversion of metals or metal oxides in ammonia flow at high temperature (T > 1000°C), which make the application of classical templating techniques difficult. Graphitic carbon nitride, g-C3N4, despite its fundamental and theoretical importance, is probably one of the most promising materials to complement carbon in material science and many efforts are put in the synthesis of this material. A simple polyaddition/elimination reaction path at high temperature (T = 550°C) allows the polymerisation of cyanamide toward graphitic carbon nitride solids. By hard templating, using nanostructured silica or aluminium oxide as nanotemplates, a variety of nanostructured graphitic carbon nitrides such as nanorods, nanotubes, meso- and macroporous powders could be obtained by nanocasting or nanocoating. Due to the special semi-conducting properties of the graphitic carbon nitride matrix, the nanostructured graphitic carbon nitrides show unexpected catalytic activity for the activation of benzene in Friedel-Crafts type reactions, making this material an interesting metal free catalyst. Furthermore, due to the chemical composition of g-C3N4 and the fact that it is totally decomposed at temperatures between 600°C and 800°C even under inert atmosphere, g-C3N4 was shown to be a good nitrogen donor for the synthesis of early transition metal nitrides at high temperatures. Thus using the nanostructured carbon nitrides as “reactive templates” or “nanoreactors”, various metal nitride nanostructures, such as nanoparticles and porous frameworks could be obtained at high temperature. In this approach the carbon nitride nanostructure played both the role of the nitrogen source and of the exotemplate, imprinting its size and shape to the resulting metal nitride nanostructure. N2 - Die Nanostrukturierung anorganischer Materialien, d.h. die Kontrolle ihrer Form und Größe auf der Nanometerebene durch unterschiedliche Herstellungsverfahren, ist ein sich immer noch erweiterndes Forschungsgebiet. Eine solche Nanostrukturierung wird oft über sogenannte Templatierungsverfahren erreicht: Hier werden Formgeber (Template) mit definierter Morphologie und Größe verwendet und deren Struktur in ein neues Material abgebildet. Templatierungsverfahren können, je nach der Beschaffenheit des Templats, zwischen „weich“ und „hart“ unterschieden werden. Die Begriffe beziehen sich dabei vor allem auf die mechanische und thermische Stabilität der Template, d.h. weiche Template sind vornehmlich organischer, harte Template anorganischer Natur. Wo weiche Template in milden chemischen Verfahren eingesetzt werden, werden harte Template zur Herstellung von Materialien bei Hochtemperaturverfahren verwendet (z. B. poröse Kohlenstoffe). Allgemein dienen Template ausschließlich als Strukturgeber und gehen in keiner Weise in Form einer chemischen Reaktion in die Synthese des gewünschten Materials mit ein. Gegenstand dieser Arbeit ist ein neues Templatierungsverfahren: Die „reaktive Templatierung“. Hierbei wird das Templat - neben seiner Funktion als Strukturgeber – auch als Reagenz für die Synthese des Produktes verwendet. Dieser Synthese-Ansatz öffnet damit neue Wege für die Synthese von nanostrukturierten Materialien, die durch klassische Templatierungsansätze schwer zugänglich sind. Hierzu zählen zum Beispiel die Metallnitride. Üblicherweise werden Metallnitride über die Umsetzung von Metallen oder Metalloxiden in einem Ammoniakstrom bei Mindesttemperaturen von 1000°C gewonnen, was die Anwendung klassischer Templatierungsverfahren beinahe unmöglich macht. Darüber hinaus sind konzentrierte Lauge oder Flusssäure, welche zur Entfernung klassischer harter Template benötigt werden auch Aufschlussmittel für Metallnitride. Graphitisches Kohlenstoffnitrid, g-C3N4, ist wohl eines der meistversprechendsten Materialien um Kohlenstoff in der Materialwissenschaft zu ergänzen. Es wurden bereits viele potentielle Syntheseansätze beschrieben. Eine durch Groenewolt M. erstellte Route ist die thermisch induzierte Polykondensation von Cyanamid (NCNH2) bei 550°C. Da g-C3N4 sich zwischen 600°C und 800°C vollständig in NH3 und CxNyH-Gase zersetzt, ist es eine geeignete Festkörper-Stickstoffquelle für die Herstellung von Metalnitriden. Daher boten sich nanostrukturierte graphitische Kohlenstoffnitride als geeignete reaktive Template oder Nanoreaktoren zur Herstellung von nano-strukturierten Metalnitriden an. Die Templatierung der g-C3N4-Matrix wurde über klassische Harttemplatierungsverfahren erreicht. So konnte eine Vielzahl nano-strukturierter g-C3N4 Materialien synthetisiert werden wie zum Beispiel Nanostäbchen, Nanoröhren, mesoporöse oder makroporöse graphitische Kohlenstoffnitride. Diese haben sich interessanterweise, als metalfreie Katalysatoren für die Aktivierung von Benzol in Friedel-Crafts-Acylierung und -Alkylierung erwiesen. Durch die Infiltrierung der nano-strukturierten g-C3N4-Materialien mit diversen Metal-Präkursoren und nachfolgendem Tempern bei 800°C unter Schutzgas, konnten entsprechende nano-strukturierte Metalnitride, als Nanoabdrücke der vorgegebenen Kohlenstoffnitrid Nanostrukturen hergestellt werden. So konnten TiN, VN, GaN, AlGaN und TiVN Nanopartikel synthetisiert werden, macroporöse TiN/Kohlenstoff Komposite sowie TiN Hohlkugeln. Die so hergestellten Materialien erwiesen sich als effektive basische Katalysatoren für Aldol-Kondensations Reaktionen. KW - Kohlenstoffnitride KW - Metallnitride KW - nano KW - Templatierung KW - Carbonitrides KW - metal nitrides KW - reactive templating KW - confinement KW - nano Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19777 ER -