TY - GEN A1 - Purinton, Benjamin A1 - Bookhagen, Bodo T1 - Validation of digital elevation models (DEMs) and comparison of geomorphic metrics on the southern Central Andean Plateau N2 - In this study, we validate and compare elevation accuracy and geomorphic metrics of satellite-derived digital elevation models (DEMs) on the southern Central Andean Plateau. The plateau has an average elevation of 3.7 km and is characterized by diverse topography and relief, lack of vegetation, and clear skies that create ideal conditions for remote sensing. At 30m resolution, SRTM-C, ASTER GDEM2, stacked ASTER L1A stereopair DEM, ALOS World 3D, and TanDEM-X have been analyzed. The higher-resolution datasets include 12m TanDEM-X, 10m single-CoSSC TerraSAR-X/TanDEM-X DEMs, and 5m ALOS World 3D. These DEMs are state of the art for optical (ASTER and ALOS) and radar (SRTM-C and TanDEM-X) spaceborne sensors. We assessed vertical accuracy by comparing standard deviations of the DEM elevation versus 307 509 differential GPS measurements across 4000m of elevation. For the 30m DEMs, the ASTER datasets had the highest vertical standard deviation at > 6.5 m, whereas the SRTM-C, ALOS World 3D, and TanDEM-X were all < 3.5 m. Higher-resolution DEMs generally had lower uncertainty, with both the 12m TanDEM-X and 5m ALOSWorld 3D having < 2m vertical standard deviation. Analysis of vertical uncertainty with respect to terrain elevation, slope, and aspect revealed the low uncertainty across these attributes for SRTM-C (30 m), TanDEM-X (12–30 m), and ALOS World 3D (5–30 m). Single-CoSSC TerraSAR-X/TanDEM-X 10m DEMs and the 30m ASTER GDEM2 displayed slight aspect biases, which were removed in their stacked counterparts (TanDEM-X and ASTER Stack). Based on low vertical standard deviations and visual inspection alongside optical satellite data, we selected the 30m SRTM-C, 12–30m TanDEM-X, 10m single-CoSSC TerraSAR-X/TanDEM-X, and 5m ALOS World 3D for geomorphic metric comparison in a 66 km2 catchment with a distinct river knickpoint. Consistent m=n values were found using chi plot channel profile analysis, regardless of DEM type and spatial resolution. Slope, curvature, and drainage area were calculated and plotting schemes were used to assess basin-wide differences in the hillslope-to-valley transition related to the knickpoint. While slope and hillslope length measurements vary little between datasets, curvature displays higher magnitude measurements with fining resolution. This is especially true for the optical 5m ALOS World 3D DEM, which demonstrated high-frequency noise in 2–8 pixel steps through a Fourier frequency analysis. The improvements in accurate space-radar DEMs (e.g., TanDEM-X) for geomorphometry are promising, but airborne or terrestrial data are still necessary for meter-scale analysis. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 338 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396277 ER - TY - GEN A1 - Atmani, Farid A1 - Bookhagen, Bodo A1 - Smith, Taylor T1 - Measuring Vegetation Heights and Their Seasonal Changes in the Western Namibian Savanna Using Spaceborne Lidars T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) with its land and vegetation height data product (ATL08), and Global Ecosystem Dynamics Investigation (GEDI) with its terrain elevation and height metrics data product (GEDI Level 2A) missions have great potential to globally map ground and canopy heights. Canopy height is a key factor in estimating above-ground biomass and its seasonal changes; these satellite missions can also improve estimated above-ground carbon stocks. This study presents a novel Sparse Vegetation Detection Algorithm (SVDA) which uses ICESat-2 (ATL03, geolocated photons) data to map tree and vegetation heights in a sparsely vegetated savanna ecosystem. The SVDA consists of three main steps: First, noise photons are filtered using the signal confidence flag from ATL03 data and local point statistics. Second, we classify ground photons based on photon height percentiles. Third, tree and grass photons are classified based on the number of neighbors. We validated tree heights with field measurements (n = 55), finding a root-mean-square error (RMSE) of 1.82 m using SVDA, GEDI Level 2A (Geolocated Elevation and Height Metrics product): 1.33 m, and ATL08: 5.59 m. Our results indicate that the SVDA is effective in identifying canopy photons in savanna ecosystems, where ATL08 performs poorly. We further identify seasonal vegetation height changes with an emphasis on vegetation below 3 m; widespread height changes in this class from two wet-dry cycles show maximum seasonal changes of 1 m, possibly related to seasonal grass-height differences. Our study shows the difficulties of vegetation measurements in savanna ecosystems but provides the first estimates of seasonal biomass changes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1275 KW - ICESat-2 KW - GEDI KW - canopy height KW - lidar KW - savanna Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-569915 SN - 1866-8372 IS - 1275 ER - TY - GEN A1 - Smith, Taylor A1 - Bookhagen, Bodo T1 - Assessing Multi-Temporal Snow-Volume Trends in High Mountain Asia From 1987 to 2016 Using High-Resolution Passive Microwave Data T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - High Mountain Asia (HMA) is dependent upon both the amount and timing of snow and glacier meltwater. Previous model studies and coarse resolution (0.25° × 0.25°, ∼25 km × 25 km) passive microwave assessments of trends in the volume and timing of snowfall, snowmelt, and glacier melt in HMA have identified key spatial and seasonal heterogeneities in the response of snow to changes in regional climate. Here we use recently developed, continuous, internally consistent, and high-resolution passive microwave data (3.125 km × 3.125 km, 1987–2016) from the special sensor microwave imager instrument family to refine and extend previous estimates of changes in the snow regime of HMA. We find an overall decline in snow volume across HMA; however, there exist spatially contiguous regions of increasing snow volume—particularly during the winter season in the Pamir, Karakoram, Hindu Kush, and Kunlun Shan. Detailed analysis of changes in snow-volume trends through time reveal a large step change from negative trends during the period 1987–1997, to much more positive trends across large regions of HMA during the periods 1997–2007 and 2007–2016. We also find that changes in high percentile monthly snow-water volume exhibit steeper trends than changes in low percentile snow-water volume, which suggests a reduction in the frequency of high snow-water volumes in much of HMA. Regions with positive snow-water storage trends generally correspond to regions of positive glacier mass balances. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1020 KW - snow KW - glacier KW - climate change KW - passive microwave KW - special sensor microwave imager KW - special sensor microwave imager/sounder Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-484176 SN - 1866-8372 IS - 1020 ER - TY - GEN A1 - Olen, Stephanie M. A1 - Bookhagen, Bodo T1 - Mapping Damage-Affected Areas after Natural Hazard Events Using Sentinel-1 Coherence Time Series T2 - remote sensing N2 - The emergence of the Sentinel-1A and 1B satellites now offers freely available and widely accessible Synthetic Aperture Radar (SAR) data. Near-global coverage and rapid repeat time (6–12 days) gives Sentinel-1 data the potential to be widely used for monitoring the Earth’s surface. Subtle land-cover and land surface changes can affect the phase and amplitude of the C-band SAR signal, and thus the coherence between two images collected before and after such changes. Analysis of SAR coherence therefore serves as a rapidly deployable and powerful tool to track both seasonal changes and rapid surface disturbances following natural disasters. An advantage of using Sentinel-1 C-band radar data is the ability to easily construct time series of coherence for a region of interest at low cost. In this paper, we propose a new method for Potentially Affected Area (PAA) detection following a natural hazard event. Based on the coherence time series, the proposed method (1) determines the natural variability of coherence within each pixel in the region of interest, accounting for factors such as seasonality and the inherent noise of variable surfaces; and (2) compares pixel-by-pixel syn-event coherence to temporal coherence distributions to determine where statistically significant coherence loss has occurred. The user can determine to what degree the syn-event coherence value (e.g., 1st, 5th percentile of pre-event distribution) constitutes a PAA, and integrate pertinent regional data, such as population density, to rank and prioritise PAAs. We apply the method to two case studies, Sarpol-e, Iran following the 2017 Iran-Iraq earthquake, and a landslide-prone region of NW Argentina, to demonstrate how rapid identification and interpretation of potentially affected areas can be performed shortly following a natural hazard event. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 471 KW - Sentinel-1 KW - natural hazards KW - rapid damage mapping KW - coherence KW - potentially affected areas (PAA) Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-417766 ER - TY - GEN A1 - Smith, Taylor A1 - Bookhagen, Bodo A1 - Cannon, Forest T1 - Improving semi-automated glacier mapping with a multi-method approach BT - applications in central Asia T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Studies of glaciers generally require precise glacier outlines. Where these are not available, extensive manual digitization in a geographic information system (GIS) must be performed, as current algorithms struggle to delineate glacier areas with debris cover or other irregular spectral profiles. Although several approaches have improved upon spectral band ratio delineation of glacier areas, none have entered wide use due to complexity or computational intensity. In this study, we present and apply a glacier mapping algorithm in Central Asia which delineates both clean glacier ice and debris-covered glacier tongues. The algorithm is built around the unique velocity and topographic characteristics of glaciers and further leverages spectral and spatial relationship data. We found that the algorithm misclassifies between 2 and 10% of glacier areas, as compared to a similar to 750 glacier control data set, and can reliably classify a given Landsat scene in 3-5 min. The algorithm does not completely solve the difficulties inherent in classifying glacier areas from remotely sensed imagery but does represent a significant improvement over purely spectral-based classification schemes, such as the band ratio of Landsat 7 bands three and five or the normalized difference snow index. The main caveats of the algorithm are (1) classification errors at an individual glacier level, (2) reliance on manual intervention to separate connected glacier areas, and (3) dependence on fidelity of the input Landsat data. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 510 KW - debris-covered glaciers KW - land ice measurements KW - remote-sensing data KW - thematic mapper KW - glims project KW - aster data KW - inventory KW - area KW - deformation KW - parameters Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-408471 SN - 1866-8372 IS - 510 ER - TY - CHAP A1 - Zeilinger, Gerold A1 - Mutti, Maria A1 - Strecker, Manfred A1 - Rehak, Katrin A1 - Bookhagen, Bodo A1 - Schwab, Marco T1 - Integration of digital elevation models and satellite images to investigate geological processes. N2 - In order to better understand the geological boundary conditions for ongoing or past surface processes geologists face two important questions: 1) How can we gain additional knowledge about geological processes by analyzing digital elevation models (DEM) and satellite images and 2) Do these efforts present a viable approach for more efficient research. Here, we will present case studies at a variety of scales and levels of resolution to illustrate how we can substantially complement and enhance classical geological approaches with remote sensing techniques. Commonly, satellite and DEM based studies are being used in a first step of assessing areas of geologic interest. While in the past the analysis of satellite imagery (e.g. Landsat TM) and aerial photographs was carried out to characterize the regional geologic characteristics, particularly structure and lithology, geologists have increasingly ventured into a process-oriented approach. This entails assessing structures and geomorphic features with a concept that includes active tectonics or tectonic activity on time scales relevant to humans. In addition, these efforts involve analyzing and quantifying the processes acting at the surface by integrating different remote sensing and topographic data (e.g. SRTM-DEM, SSM/I, GPS, Landsat 7 ETM, Aster, Ikonos…). A combined structural and geomorphic study in the hyperarid Atacama desert demonstrates the use of satellite and digital elevation data for assessing geological structures formed by long-term (millions of years) feedback mechanisms between erosion and crustal bending (Zeilinger et al., 2005). The medium-term change of landscapes during hundred thousands to millions years in a more humid setting is shown in an example from southern Chile. Based on an analysis of rivers/watersheds combined with landscapes parameterization by using digital elevation models, the geomorphic evolution and change in drainage pattern in the coastal Cordillera can be quantified and put into the context of seismotectonic segmentation of a tectonically active region. This has far-reaching implications for earthquake rupture scenarios and hazard mitigation (K. Rehak, see poster on IMAF Workshop). Two examples illustrate short-term processes on decadal, centennial and millennial time scales: One study uses orogen scale precipitation gradients derived from remotely sensed passive microwave data (Bookhagen et al., 2005a). They demonstrate how debris flows were triggered as a response of slopes to abnormally strong rainfall in the interior parts of the Himalaya during intensified monsoons. The area of the orogen that receives high amounts of precipitation during intensified monsoons also constitutes numerous landslide deposits of up to 1km3 volume that were generated during intensified monsoon phase at about 27 and 9 ka (Bookhagen et al., 2005b). Another project in the Swiss Alps compared sets of aerial photographs recorded in different years. By calculating high resolution surfaces the mass transport in a landslide could be reconstructed (M. Schwab, Universität Bern). All these examples, although representing only a short and limited selection of projects using remote sense data in geology, have as a common approach the goal to quantify geological processes. With increasing data resolution and new sensors future projects will even enable us to recognize more patterns and / or structures indicative of geological processes in tectonically active areas. This is crucial for the analysis of natural hazards like earthquakes, tsunamis and landslides, as well as those hazards that are related to climatic variability. The integration of remotely sensed data at different spatial and temporal scales with field observations becomes increasingly important. Many of presently highly populated places and increasingly utilized regions are subject to significant environmental pressure and often constitute areas of concentrated economic value. Combined remote sensing and ground-truthing in these regions is particularly important as geologic, seismicity and hydrologic data may be limited here due to the recency of infrastructural development. Monitoring ongoing processes and evaluating the remotely sensed data in terms of recurrence of events will greatly enhance our ability to assess and mitigate natural hazards.
Dokument 1: Foliensatz | Dokument 2: Abstract
Interdisziplinäres Zentrum für Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7063 ER - TY - GEN A1 - Ramezani Ziarani, Maryam A1 - Bookhagen, Bodo A1 - Schmidt, Torsten A1 - Wickert, Jens A1 - de la Torre, Alejandro A1 - Hierro, Rodrigo T1 - Using Convective Available Potential Energy (CAPE) and Dew-Point Temperature to Characterize Rainfall-Extreme Events in the South-Central Andes T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - The interactions between atmosphere and steep topography in the eastern south–central Andes result in complex relations with inhomogenous rainfall distributions. The atmospheric conditions leading to deep convection and extreme rainfall and their spatial patterns—both at the valley and mountain-belt scales—are not well understood. In this study, we aim to identify the dominant atmospheric conditions and their spatial variability by analyzing the convective available potential energy (CAPE) and dew-point temperature (Td). We explain the crucial effect of temperature on extreme rainfall generation along the steep climatic and topographic gradients in the NW Argentine Andes stretching from the low-elevation eastern foreland to the high-elevation central Andean Plateau in the west. Our analysis relies on version 2.0 of the ECMWF’s (European Centre for Medium-RangeWeather Forecasts) Re-Analysis (ERA-interim) data and TRMM (Tropical Rainfall Measuring Mission) data. We make the following key observations: First, we observe distinctive gradients along and across strike of the Andes in dew-point temperature and CAPE that both control rainfall distributions. Second, we identify a nonlinear correlation between rainfall and a combination of dew-point temperature and CAPE through a multivariable regression analysis. The correlation changes in space along the climatic and topographic gradients and helps to explain controlling factors for extreme-rainfall generation. Third, we observe more contribution (or higher importance) of Td in the tropical low-elevation foreland and intermediate-elevation areas as compared to the high-elevation central Andean Plateau for 90th percentile rainfall. In contrast, we observe a higher contribution of CAPE in the intermediate-elevation area between low and high elevation, especially in the transition zone between the tropical and subtropical areas for the 90th percentile rainfall. Fourth, we find that the parameters of the multivariable regression using CAPE and Td can explain rainfall with higher statistical significance for the 90th percentile compared to lower rainfall percentiles. Based on our results, the spatial pattern of rainfall-extreme events during the past ∼16 years can be described by a combination of dew-point temperature and CAPE in the south–central Andes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 771 KW - eastern south–central Andes KW - extreme rainfall KW - deep convection KW - convective available potential energy KW - dew-point temperature Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-438865 SN - 1866-8372 IS - 771 ER - TY - JOUR A1 - Günther, Oliver A1 - Schüle, Manja A1 - Zurell, Damaris A1 - Jeltsch, Florian A1 - Roeleke, Manuel A1 - Kampe, Heike A1 - Zimmermann, Matthias A1 - Scholz, Jana A1 - Engbert, Ralf A1 - Elsner, Birgit A1 - Schlangen, David A1 - Agrofylax, Luisa A1 - Georgi, Doreen A1 - Weymar, Mathias A1 - Wagener, Thorsten A1 - Bookhagen, Bodo A1 - Eibl, Eva P. S. A1 - Korup, Oliver A1 - Oswald, Sascha Eric A1 - Thieken, Annegret A1 - van der Beek, Peter T1 - Portal Wissen = Exzellenz JF - Portal Wissen: Das Forschungsmagazin der Universität Potsdam N2 - Was nicht nur gut oder sehr gut ist, nennen wir gern exzellent. Aber was meint das eigentlich? Vom lateinischen „excellere“ kommend, beschreibt es Dinge, Personen oder Handlungen, die „hervor-“ oder „herausragen“ aus der Menge, sich „auszeichnen“ gegenüber anderen. Mehr geht nicht. Exzellenz ist das Mittel der Wahl, wenn es darum geht, der Erste oder Beste zu sein. Und das macht auch vor der Forschung nicht halt. Wer auf die Universität Potsdam schaut, findet zahlreiche ausgezeichnete Forschende, hervorragende Projekte und immer wieder auch aufsehenerregende Erkenntnisse, Veröffentlichungen und Ergebnisse. Aber ist die UP auch exzellent? Eine Frage, die 2023 ganz sicher andere Wellen schlägt als vielleicht vor 20 Jahren. Denn seit dem Start der Exzellenzinitiative 2005 gelten als – wörtlich – exzellent jene Hochschulen, denen es gelingt, in dem umfangreichsten Förderprogramm für Wissenschaft in Deutschland einen Zuschlag zu erhalten. Egal ob in Form von Graduiertenschulen, Forschungsclustern oder – seit Fortsetzung des Programms ab 2019 unter dem Titel „Exzellenzstrategie“ – ganzen Exzellenzuniversitäten: Wer im Kreis der Forschungsuniversitäten zu den Besten gehören will, braucht das Siegel der Exzellenz. In der gerade eingeläuteten neuen Wettbewerbsrunde der „Exzellenzstrategie des Bundes und der Länder“ bewirbt sich die Universität Potsdam mit drei Clusterskizzen um Förderung. Ein Antrag kommt aus der Ökologie- und Biodiversitätsforschung. Ziel ist es, ein komplexes Bild ökologischer Prozesse zu zeichnen – und dabei die Rolle von einzelnen Individuen ebenso zu betrachten wie das Zusammenwirken vieler Arten in einem Ökosystem, um die Funktion der Artenvielfalt genauer zu bestimmen. Eine zweite Skizze haben die Kognitionswissenschaften eingereicht. Hier soll das komplexe Nebeneinander von Sprache und Kognition, Entwicklung und Lernen sowie Motivation und Verhalten als dynamisches Miteinander erforscht werden – wobei auch mit den Erziehungswissenschaften kooperiert wird, um verknüpfte Lernund Bildungsprozesse stets mitzudenken. Der dritte Antrag aus den Geo- und Umweltwissenschaften nimmt extreme und besonders folgenschwere Naturgefahren und -prozesse wie Überschwemmungen und Dürren in den Blick. Die Forschenden untersuchen die Extremereignisse mit besonderem Fokus auf deren Wechselwirkung mit der Gesellschaft, um mit ihnen einhergehende Risiken und Schäden besser einschätzen sowie künftig rechtzeitig Maßnahmen einleiten zu können. „Alle drei Anträge zeichnen ein hervorragendes Bild unserer Leistungsfähigkeit“, betont der Präsident der Universität, Prof. Oliver Günther, Ph.D. „Die Skizzen dokumentieren eindrucksvoll unser Engagement, vorhandene Forschungsexzellenz sowie die Potenziale der Universität Potsdam insgesamt. Allein die Tatsache, dass sich drei schlagkräftige Konsortien in ganz unterschiedlichen Themenbereichen zusammengefunden haben, zeigt, dass wir auf unserem Weg in die Spitzengruppe der deutschen Universitäten einen guten Schritt vorangekommen sind.“ In diesem Heft schauen wir, was sich in und hinter diesen Anträgen verbirgt: Wir haben mit den Wissenschaftlerinnen und Wissenschaftlern gesprochen, die sie geschrieben haben, und sie gefragt, was sie sich vornehmen, sollten sie den Zuschlag erhalten und ein Cluster an die Universität holen. Wir haben aber auch auf die Forschung geschaut, die zu den Anträgen geführt hat und die schon länger das Profil der Universität prägt und ihr national wie international Anerkennung eingebracht hat. Wir stellen eine kleine Auswahl an Projekten, Methoden und Forschenden vor, um zu zeigen, warum in diesen Anträgen tatsächlich exzellente Forschung steckt! Übrigens: Auch „Exzellenz“ ist nicht das Ende der Fahnenstange. Immerhin lässt sich das Adjektiv exzellent sogar steigern. In diesem Sinne wünschen wir exzellentestes Vergnügen beim Lesen! T3 - Portal Wissen: Das Forschungsmagazin der Universität Potsdam [Deutsche Ausgabe] - 02/2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-611440 SN - 2194-4245 IS - 02/2023 ER - TY - JOUR A1 - Günther, Oliver A1 - Schüle, Manja A1 - Zurell, Damaris A1 - Jeltsch, Florian A1 - Roeleke, Manuel A1 - Kampe, Heike A1 - Zimmermann, Matthias A1 - Scholz, Jana A1 - Mikulla, Stefanie A1 - Engbert, Ralf A1 - Elsner, Birgit A1 - Schlangen, David A1 - Agrofylax, Luisa A1 - Georgi, Doreen A1 - Weymar, Mathias A1 - Wagener, Thorsten A1 - Bookhagen, Bodo A1 - Eibl, Eva P. S. A1 - Korup, Oliver A1 - Oswald, Sascha Eric A1 - Thieken, Annegret A1 - van der Beek, Peter T1 - Portal Wissen = Excellence JF - Portal Wissen: The research magazine of the University of Potsdam N2 - When something is not just good or very good, we often call it excellent. But what does that really mean? Coming from the Latin word “excellere,” it describes things, persons, or actions that are outstanding or superior and distinguish themselves from others. It cannot get any better. Excellence is the top choice for being the first or the best. Research is no exception. At the university, you will find numerous exceptional researchers, outstanding projects, and, time and again, sensational findings, publications, and results. But is the University of Potsdam also excellent? A question that will certainly create a different stir in 2023 than it did perhaps 20 years ago. Since the launch of the Excellence Initiative in 2005, universities that succeed in winning the most comprehensive funding program for research in Germany have been considered – literally – excellent. Whether in the form of graduate schools, research clusters, or – since the program was continued in 2019 under the title “Excellence Strategy” – entire universities of excellence: Anyone who wants to be among the best research universities needs the seal of excellence. The University of Potsdam is applying for funding with three cluster proposals in the recently launched new round of the “Excellence Strategy of the German Federal and State Governments.” One proposal comes from ecology and biodiversity research. The aim is to paint a comprehensive picture of ecological processes by examining the role of single individuals as well as the interactions among many species in an ecosystem to precisely determine the function of biodiversity. A second proposal has been submitted by the cognitive sciences. Here, the complex coexistence of language and cognition, development and learning, as well as motivation and behavior will be researched as a dynamic interrelation. The projects will include cooperation with the educational sciences to constantly consider linked learning and educational processes. The third proposal from the geo and environmental sciences concentrates on extreme and particularly devastating natural hazards and processes such as floods and droughts. The researchers examine these extreme events, focusing on their interaction with society, to be able to better assess the risks and damages they might involve and to initiate timely measures in the future. “All three proposals highlight the excellence of our performance,” emphasizes University President Prof. Oliver Günther, Ph.D. “The outlines impressively document our commitment, existing research excellence, and the potential of the University of Potsdam as a whole. The fact that three powerful consortia have come together in different subject areas shows that we have taken a good step forward on our way to becoming one of the top German universities.” In this issue, we are looking at what is in and behind these proposals: We talked to the researchers who wrote them. We asked them about their plans in case their proposals are successful and they bring a cluster of excellence to the university. But we also looked at the research that has led to the proposals, has long shaped the university’s profile, and earned it national and international recognition. We present a small selection of projects, methods, and researchers to illustrate why there really is excellent research in these proposals! By the way, “excellence” is also not the end of the flagpole. After all, the adjective “excellent” even has a comparative and a superlative. With this in mind, I wish you the most excellent pleasure reading this issue! T3 - Portal Wissen: The research magazine of the University of Potsdam [Englische Ausgabe] - 02/2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-611456 SN - 2198-9974 IS - 02/2023 ER - TY - GEN A1 - Milewski, Robert A1 - Chabrillat, Sabine A1 - Bookhagen, Bodo T1 - Analyses of Namibian Seasonal Salt Pan Crust Dynamics and Climatic Drivers Using Landsat 8 Time-Series and Ground Data T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Salt pans are highly dynamic environments that are difficult to study by in situ methods because of their harsh climatic conditions and large spatial areas. Remote sensing can help to elucidate their environmental dynamics and provide important constraints regarding their sedimentological, mineralogical, and hydrological evolution. This study utilizes spaceborne multitemporal multispectral optical data combined with spectral endmembers to document spatial distribution of surface crust types over time on the Omongwa pan located in the Namibian Kalahari. For this purpose, 49 surface samples were collected for spectral and mineralogical characterization during three field campaigns (2014–2016) reflecting different seasons and surface conditions of the salt pan. An approach was developed to allow the spatiotemporal analysis of the salt pan crust dynamics in a dense time-series consisting of 77 Landsat 8 cloud-free scenes between 2014 and 2017, covering at least three major wet–dry cycles. The established spectral analysis technique Sequential Maximum Angle Convex Cone (SMACC) extraction method was used to derive image endmembers from the Landsat time-series stack. Evaluation of the extracted endmember set revealed that the multispectral data allowed the differentiation of four endmembers associated with mineralogical mixtures of the crust’s composition in dry conditions and three endmembers associated with flooded or muddy pan conditions. The dry crust endmember spectra have been identified in relation to visible, near infrared, and short-wave infrared (VNIR–SWIR) spectroscopy and X-ray diffraction (XRD) analyses of the collected surface samples. According these results, the spectral endmembers are interpreted as efflorescent halite crust, mixed halite–gypsum crust, mixed calcite quartz sepiolite crust, and gypsum crust. For each Landsat scene the spatial distribution of these crust types was mapped with the Spectral Angle Mapper (SAM) method and significant spatiotemporal dynamics of the major surface crust types were observed. Further, the surface crust dynamics were analyzed in comparison with the pan’s moisture regime and other climatic parameters. The results show that the crust dynamics are mainly driven by flooding events in the wet season, but are also influenced by temperature and aeolian activity in the dry season. The approach utilized in this study combines the advantages of multitemporal satellite data for temporal event characterization with advantages from hyperspectral methods for the image and ground data analyses that allow improved mineralogical differentiation and characterization. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 988 KW - salt pan KW - playa KW - spectral analysis KW - crust KW - saline pan cycle KW - evaporites KW - time-series mapping Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-475685 SN - 1866-8372 IS - 988 ER - TY - GEN A1 - Ramezani Ziarani, Maryam A1 - Bookhagen, Bodo A1 - Schmidt, Torsten A1 - Wickert, Jens A1 - de la Torre, Alejandro A1 - Deng, Zhiguo A1 - Calori, Andrea T1 - A model for the relationship between rainfall, GNSS-derived integrated water vapour, and CAPE in the eastern central Andes T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Atmospheric water vapour content is a key variable that controls the development of deep convective storms and rainfall extremes over the central Andes. Direct measurements of water vapour are challenging; however, recent developments in microwave processing allow the use of phase delays from L-band radar to measure the water vapour content throughout the atmosphere: Global Navigation Satellite System (GNSS)-based integrated water vapour (IWV) monitoring shows promising results to measure vertically integrated water vapour at high temporal resolutions. Previous works also identified convective available potential energy (CAPE) as a key climatic variable for the formation of deep convective storms and rainfall in the central Andes. Our analysis relies on GNSS data from the Argentine Continuous Satellite Monitoring Network, Red Argentina de Monitoreo Satelital Continuo (RAMSAC) network from 1999 to 2013. CAPE is derived from version 2.0 of the ECMWF’s (European Centre for Medium-Range Weather Forecasts) Re-Analysis (ERA-interim) and rainfall from the TRMM (Tropical Rainfall Measuring Mission) product. In this study, we first analyse the rainfall characteristics of two GNSS-IWV stations by comparing their complementary cumulative distribution function (CCDF). Second, we separately derive the relation between rainfall vs. CAPE and GNSS-IWV. Based on our distribution fitting analysis, we observe an exponential relation of rainfall to GNSS-IWV. In contrast, we report a power-law relationship between the daily mean value of rainfall and CAPE at the GNSS-IWV station locations in the eastern central Andes that is close to the theoretical relationship based on parcel theory. Third, we generate a joint regression model through a multivariable regression analysis using CAPE and GNSS-IWV to explain the contribution of both variables in the presence of each other to extreme rainfall during the austral summer season. We found that rainfall can be characterised with a higher statistical significance for higher rainfall quantiles, e.g., the 0.9 quantile based on goodness-of-fit criterion for quantile regression. We observed different contributions of CAPE and GNSS-IWV to rainfall for each station for the 0.9 quantile. Fourth, we identify the temporal relation between extreme rainfall (the 90th, 95th, and 99th percentiles) and both GNSS-IWV and CAPE at 6 h time steps. We observed an increase before the rainfall event and at the time of peak rainfall—both for GNSS-integrated water vapour and CAPE. We show higher values of CAPE and GNSS-IWV for higher rainfall percentiles (99th and 95th percentiles) compared to the 90th percentile at a 6-h temporal scale. Based on our correlation analyses and the dynamics of the time series, we show that both GNSS-IWV and CAPE had comparable magnitudes, and we argue to consider both climatic variables when investigating their effect on rainfall extremes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1172 KW - Global Navigation Satellite System (GNSS) KW - GNSS-integrated water vapour KW - convective available potential energy (CAPE) KW - extreme rainfall KW - TRMM Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-523256 SN - 1866-8372 IS - 1172 ER - TY - GEN A1 - Smith, Taylor A1 - Rheinwalt, Aljoscha A1 - Bookhagen, Bodo T1 - Determining the optimal grid resolution for topographic analysis on an airborne lidar dataset T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Digital elevation models (DEMs) are a gridded representation of the surface of the Earth and typically contain uncertainties due to data collection and processing. Slope and aspect estimates on a DEM contain errors and uncertainties inherited from the representation of a continuous surface as a grid (referred to as truncation error; TE) and from any DEM uncertainty. We analyze in detail the impacts of TE and propagated elevation uncertainty (PEU) on slope and aspect. Using synthetic data as a control, we define functions to quantify both TE and PEU for arbitrary grids. We then develop a quality metric which captures the combined impact of both TE and PEU on the calculation of topographic metrics. Our quality metric allows us to examine the spatial patterns of error and uncertainty in topographic metrics and to compare calculations on DEMs of different sizes and accuracies. Using lidar data with point density of ∼10 pts m−2 covering Santa Cruz Island in southern California, we are able to generate DEMs and uncertainty estimates at several grid resolutions. Slope (aspect) errors on the 1 m dataset are on average 0.3∘ (0.9∘) from TE and 5.5∘ (14.5∘) from PEU. We calculate an optimal DEM resolution for our SCI lidar dataset of 4 m that minimizes the error bounds on topographic metric calculations due to the combined influence of TE and PEU for both slope and aspect calculations over the entire SCI. Average slope (aspect) errors from the 4 m DEM are 0.25∘ (0.75∘) from TE and 5∘ (12.5∘) from PEU. While the smallest grid resolution possible from the high-density SCI lidar is not necessarily optimal for calculating topographic metrics, high point-density data are essential for measuring DEM uncertainty across a range of resolutions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 725 KW - Digital Elevation Model KW - River Incision Model KW - Accuracy Asseessment KW - Landscape Response KW - Error KW - Slope KW - Uncertainties KW - Extraction KW - Expression KW - Patterns Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-430165 SN - 1866-8372 IS - 725 SP - 475 EP - 489 ER - TY - GEN A1 - Jobe, Jessica Ann Thompson A1 - Li, Tao A1 - Bookhagen, Bodo A1 - Chen, Jie A1 - Burbank, Douglas W. T1 - Dating growth strata and basin fill by combining 26Al/10Be burial dating and magnetostratigraphy BT - constraining active deformation in the Pamir–Tian Shan convergence zone, NW China T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Cosmogenic burial dating enables dating of coarse-grained, Pliocene-Pleistocene sedimentary units that are typically difficult to date with traditional methods, such as magnetostratigraphy. In the actively deforming western Tarim Basin in NW China, Pliocene-Pleistocene conglomerates were dated at eight sites, integrating Al-26/Be-10 burial dating with previously published magnetostratigraphic sections. These samples were collected from growth strata on the flanks of growing folds and from sedimentary units beneath active faults to place timing constraints on the initiation of deformation of structures within the basin and on shortening rates on active faults. These new basin-fill and growthstrata ages document the late Neogene and Quaternary growth of the Pamir and Tian Shan orogens between >5 and 1 Ma and delineate the eastward propagation of deformation at rates up to 115 km/m.y. and basinward growth of both mountain belts at rates up to 12 km/m.y. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1044 KW - thrust belts KW - Tarim Basin KW - cosmogenic AL-26 KW - production rates KW - foreland basin KW - erosion rates KW - deep crust KW - half-life KW - NE Pamir KW - evolution Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-468067 SN - 1866-8372 IS - 1044 SP - 806 EP - 828 ER - TY - GEN A1 - Purinton, Benjamin A1 - Bookhagen, Bodo T1 - Beyond Vertical Point Accuracy BT - Assessing Inter-pixel Consistency in 30 m Global DEMs for the Arid Central Andes T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Quantitative geomorphic research depends on accurate topographic data often collected via remote sensing. Lidar, and photogrammetric methods like structure-from-motion, provide the highest quality data for generating digital elevation models (DEMs). Unfortunately, these data are restricted to relatively small areas, and may be expensive or time-consuming to collect. Global and near-global DEMs with 1 arcsec (∼30 m) ground sampling from spaceborne radar and optical sensors offer an alternative gridded, continuous surface at the cost of resolution and accuracy. Accuracy is typically defined with respect to external datasets, often, but not always, in the form of point or profile measurements from sources like differential Global Navigation Satellite System (GNSS), spaceborne lidar (e.g., ICESat), and other geodetic measurements. Vertical point or profile accuracy metrics can miss the pixel-to-pixel variability (sometimes called DEM noise) that is unrelated to true topographic signal, but rather sensor-, orbital-, and/or processing-related artifacts. This is most concerning in selecting a DEM for geomorphic analysis, as this variability can affect derivatives of elevation (e.g., slope and curvature) and impact flow routing. We use (near) global DEMs at 1 arcsec resolution (SRTM, ASTER, ALOS, TanDEM-X, and the recently released Copernicus) and develop new internal accuracy metrics to assess inter-pixel variability without reference data. Our study area is in the arid, steep Central Andes, and is nearly vegetation-free, creating ideal conditions for remote sensing of the bare-earth surface. We use a novel hillshade-filtering approach to detrend long-wavelength topographic signals and accentuate short-wavelength variability. Fourier transformations of the spatial signal to the frequency domain allows us to quantify: 1) artifacts in the un-projected 1 arcsec DEMs at wavelengths greater than the Nyquist (twice the nominal resolution, so > 2 arcsec); and 2) the relative variance of adjacent pixels in DEMs resampled to 30-m resolution (UTM projected). We translate results into their impact on hillslope and channel slope calculations, and we highlight the quality of the five DEMs. We find that the Copernicus DEM, which is based on a carefully edited commercial version of the TanDEM-X, provides the highest quality landscape representation, and should become the preferred DEM for topographic analysis in areas without sufficient coverage of higher-quality local DEMs. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1242 KW - DEM noise KW - Fourier analysis KW - TanDEM-X KW - ASTER GDEM KW - Copernicus DEM KW - WorldDEM KW - SRTM KW - ALOS World 3D Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549805 SN - 1866-8372 SP - 1 EP - 24 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - GEN A1 - Purinton, Benjamin A1 - Bookhagen, Bodo T1 - Introducing PebbleCounts BT - a grain-sizing tool for photo surveys of dynamic gravel-bed rivers T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Grain-size distributions are a key geomorphic metric of gravel-bed rivers. Traditional measurement methods include manual counting or photo sieving, but these are achievable only at the 1–10 ㎡ scale. With the advent of drones and increasingly high-resolution cameras, we can now generate orthoimagery over hectares at millimeter to centimeter resolution. These scales, along with the complexity of high-mountain rivers, necessitate different approaches for photo sieving. As opposed to other image segmentation methods that use a watershed approach, our open-source algorithm, PebbleCounts, relies on k-means clustering in the spatial and spectral domain and rapid manual selection of well-delineated grains. This improves grain-size estimates for complex riverbed imagery, without post-processing. We also develop a fully automated method, PebbleCountsAuto, that relies on edge detection and filtering suspect grains, without the k-means clustering or manual selection steps. The algorithms are tested in controlled indoor conditions on three arrays of pebbles and then applied to 12 × 1 ㎡ orthomosaic clips of high-energy mountain rivers collected with a camera-on-mast setup (akin to a low-flying drone). A 20-pixel b-axis length lower truncation is necessary for attaining accurate grain-size distributions. For the k-means PebbleCounts approach, average percentile bias and precision are 0.03 and 0.09 ψ, respectively, for ∼1.16 mm pixel⁻¹ images, and 0.07 and 0.05 ψ for one 0.32 mm pixel⁻¹ image. The automatic approach has higher bias and precision of 0.13 and 0.15 ψ, respectively, for ∼1.16 mm pixel⁻¹ images, but similar values of −0.06 and 0.05 ψ for one 0.32 mm pixel⁻¹ image. For the automatic approach, only at best 70 % of the grains are correct identifications, and typically around 50 %. PebbleCounts operates most effectively at the 1 ㎡ patch scale, where it can be applied in ∼5–10 min on many patches to acquire accurate grain-size data over 10–100 ㎡ areas. These data can be used to validate PebbleCountsAuto, which may be applied at the scale of entire survey sites (102–104 ㎡ ). We synthesize results and recommend best practices for image collection, orthomosaic generation, and grain-size measurement using both algorithms. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 783 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439468 SN - 1866-8372 IS - 783 ER - TY - GEN A1 - Brieger, Frederic A1 - Herzschuh, Ulrike A1 - Pestryakova, Luidmila Agafyevna A1 - Bookhagen, Bodo A1 - Zakharov, Evgenii S. A1 - Kruse, Stefan T1 - Advances in the derivation of Northeast Siberian forest metrics using high-resolution UAV-based photogrammetric point clouds T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Forest structure is a crucial component in the assessment of whether a forest is likely to act as a carbon sink under changing climate. Detailed 3D structural information about the tundra–taiga ecotone of Siberia is mostly missing and still underrepresented in current research due to the remoteness and restricted accessibility. Field based, high-resolution remote sensing can provide important knowledge for the understanding of vegetation properties and dynamics. In this study, we test the applicability of consumer-grade Unmanned Aerial Vehicles (UAVs) for rapid calculation of stand metrics in treeline forests. We reconstructed high-resolution photogrammetric point clouds and derived canopy height models for 10 study sites from NE Chukotka and SW Yakutia. Subsequently, we detected individual tree tops using a variable-window size local maximum filter and applied a marker-controlled watershed segmentation for the delineation of tree crowns. With this, we successfully detected 67.1% of the validation individuals. Simple linear regressions of observed and detected metrics show a better correlation (R2) and lower relative root mean square percentage error (RMSE%) for tree heights (mean R2 = 0.77, mean RMSE% = 18.46%) than for crown diameters (mean R2 = 0.46, mean RMSE% = 24.9%). The comparison between detected and observed tree height distributions revealed that our tree detection method was unable to representatively identify trees <2 m. Our results show that plot sizes for vegetation surveys in the tundra–taiga ecotone should be adapted to the forest structure and have a radius of >15–20 m to capture homogeneous and representative forest stands. Additionally, we identify sources of omission and commission errors and give recommendations for their mitigation. In summary, the efficiency of the used method depends on the complexity of the forest’s stand structure. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1337 KW - UAV KW - photogrammetry KW - remote sensing KW - structure from motion KW - tundra–taiga ecotone KW - point cloud KW - forest structure Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473318 SN - 1866-8372 IS - 1337 ER - TY - GEN A1 - Tost, Jordi A1 - Ehmel, Fabian A1 - Heidmann, Frank A1 - Olen, Stephanie M. A1 - Bookhagen, Bodo T1 - Hazards and accessibility BT - combining and visualizing threat and open infrastructure data for disaster management T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - The assessment of natural hazards and risk has traditionally been built upon the estimation of threat maps, which are used to depict potential danger posed by a particular hazard throughout a given area. But when a hazard event strikes, infrastructure is a significant factor that can determine if the situation becomes a disaster. The vulnerability of the population in a region does not only depend on the area’s local threat, but also on the geographical accessibility of the area. This makes threat maps by themselves insufficient for supporting real-time decision-making, especially for those tasks that involve the use of the road network, such as management of relief operations, aid distribution, or planning of evacuation routes, among others. To overcome this problem, this paper proposes a multidisciplinary approach divided in two parts. First, data fusion of satellite-based threat data and open infrastructure data from OpenStreetMap, introducing a threat-based routing service. Second, the visualization of this data through cartographic generalization and schematization. This emphasizes critical areas along roads in a simple way and allows users to visually evaluate the impact natural hazards may have on infrastructure. We develop and illustrate this methodology with a case study of landslide threat for an area in Colombia. KW - geovisualization KW - data fusion KW - generalization KW - schematic maps KW - natural hazards KW - disaster management Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427853 SN - 1866-8372 IS - 710 ER - TY - GEN A1 - Purinton, Benjamin A1 - Bookhagen, Bodo T1 - Measuring decadal vertical land-level changes from SRTM-C (2000) and TanDEM-X (∼ 2015) in the south-central Andes T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - In the arctic and high mountains it is common to measure vertical changes of ice sheets and glaciers via digital elevation model (DEM) differencing. This requires the signal of change to outweigh the noise associated with the datasets. Excluding large landslides, on the ice-free earth the land-level change is smaller in vertical magnitude and thus requires more accurate DEMs for differencing and identification of change. Previously, this has required meter to submeter data at small spatial scales. Following careful corrections, we are able to measure land-level changes in gravel-bed channels and steep hillslopes in the south-central Andes using the SRTM-C (collected in 2000) and the TanDEM-X (collected from 2010 to 2015) near-global 12–30m DEMs. Long-standing errors in the SRTM-C are corrected using the TanDEM-X as a control surface and applying cosine-fit co-registration to remove ∼ 1∕10 pixel (∼ 3m) shifts, fast Fourier transform (FFT) and filtering to remove SRTM-C short- and long-wavelength stripes, and blocked shifting to remove remaining complex biases. The datasets are then differenced and outlier pixels are identified as a potential signal for the case of gravel-bed channels and hillslopes. We are able to identify signals of incision and aggradation (with magnitudes down to ∼ 3m in the best case) in two  > 100km river reaches, with increased geomorphic activity downstream of knickpoints. Anthropogenic gravel excavation and piling is prominently measured, with magnitudes exceeding ±5m (up to  > 10m for large piles). These values correspond to conservative average rates of 0.2 to > 0.5myr−1 for vertical changes in gravel-bed rivers. For hillslopes, since we require stricter cutoffs for noise, we are only able to identify one major landslide in the study area with a deposit volume of 16±0.15×106m3. Additional signals of change can be garnered from TanDEM-X auxiliary layers; however, these are more difficult to quantify. The methods presented can be extended to any region of the world with SRTM-C and TanDEM-X coverage where vertical land-level changes are of interest, with the caveat that remaining vertical uncertainties in primarily the SRTM-C limit detection in steep and complex topography. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 480 KW - Digital Elevation Models KW - Glacier Mass Balances KW - Structure-from-motion KW - Accuracy Assessment KW - NW Argentina KW - Nevado Coropuna KW - Sediment Flux KW - Gravel-bed KW - River Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-420487 IS - 480 ER - TY - GEN A1 - Smith, Taylor A1 - Bookhagen, Bodo A1 - Rheinwalt, Aljoscha T1 - Spatiotemporal patterns of High Mountain Asia's snowmelt season identified with an automated snowmelt detection algorithm, 1987-2016 N2 - High Mountain Asia (HMA) - encompassing the Tibetan Plateau and surrounding mountain ranges - is the primary water source for much of Asia, serving more than a billion downstream users. Many catchments receive the majority of their yearly water budget in the form of snow, which is poorly monitored by sparse in situ weather networks. Both the timing and volume of snowmelt play critical roles in downstream water provision, as many applications - such as agriculture, drinking-water generation, and hydropower - rely on consistent and predictable snowmelt runoff. Here, we examine passive microwave data across HMA with five sensors (SSMI, SSMIS, AMSR-E, AMSR2, and GPM) from 1987 to 2016 to track the timing of the snowmelt season - defined here as the time between maximum passive microwave signal separation and snow clearance. We validated our method against climate model surface temperatures, optical remote-sensing snow-cover data, and a manual control dataset (n = 2100, 3 variables at 25 locations over 28 years); our algorithm is generally accurate within 3-5 days. Using the algorithm-generated snowmelt dates, we examine the spatiotemporal patterns of the snowmelt season across HMA. The climatically short (29-year) time series, along with complex interannual snowfall variations, makes determining trends in snowmelt dates at a single point difficult. We instead identify trends in snowmelt timing by using hierarchical clustering of the passive microwave data to determine trends in self-similar regions. We make the following four key observations. (1) The end of the snowmelt season is trending almost universally earlier in HMA (negative trends). Changes in the end of the snowmelt season are generally between 2 and 8 days decade 1 over the 29-year study period (5-25 days total). The length of the snowmelt season is thus shrinking in many, though not all, regions of HMA. Some areas exhibit later peak signal separation (positive trends), but with generally smaller magnitudes than trends in snowmelt end. (2) Areas with long snowmelt periods, such as the Tibetan Plateau, show the strongest compression of the snowmelt season (negative trends). These trends are apparent regardless of the time period over which the regression is performed. (3) While trends averaged over 3 decades indicate generally earlier snowmelt seasons, data from the last 14 years (2002-2016) exhibit positive trends in many regions, such as parts of the Pamir and Kunlun Shan. Due to the short nature of the time series, it is not clear whether this change is a reversal of a long-term trend or simply interannual variability. (4) Some regions with stable or growing glaciers - such as the Karakoram and Kunlun Shan - see slightly later snowmelt seasons and longer snowmelt periods. It is likely that changes in the snowmelt regime of HMA account for some of the observed heterogeneity in glacier response to climate change. While the decadal increases in regional temperature have in general led to earlier and shortened melt seasons, changes in HMA's cryosphere have been spatially and temporally heterogeneous. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 397 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403911 ER - TY - THES A1 - Bookhagen, Bodo T1 - Late quaternary climate changes and landscape evolution in the Northwest Himalaya : geomorphologic processes in the Indian Summer Monsoon Domain N2 - The India-Eurasia continental collision zone provides a spectacular example of active mountain building and climatic forcing. In order to quantify the critically important process of mass removal, I analyzed spatial and temporal precipitation patterns of the oscillating monsoon system and their geomorphic imprints. I processed passive microwave satellite data to derive high-resolution rainfall estimates for the last decade and identified an abnormal monsoon year in 2002. During this year, precipitation migrated far into the Sutlej Valley in the northwestern part of the Himalaya and reached regions behind orographic barriers that are normally arid. There, sediment flux, mean basin denudation rates, and channel-forming processes such as erosion by debris-flows increased significantly. Similarly, during the late Pleistocene and early Holocene, solar forcing increased the strength of the Indian summer monsoon for several millennia and presumably lead to analogous precipitation distribution as were observed during 2002. However, the persistent humid conditions in the steep, high-elevation parts of the Sutlej River resulted in deep-seated landsliding. Landslides were exceptionally large, mainly due to two processes that I infer for this time: At the onset of the intensified monsoon at 9.7 ka BP heavy rainfall and high river discharge removed material stored along the river, and lowered the baselevel. Second, enhanced discharge, sediment flux, and increased pore-water pressures along the hillslopes eventually lead to exceptionally large landslides that have not been observed in other periods. The excess sediments that were removed from the upstream parts of the Sutlej Valley were rapidly deposited in the low-gradient sectors of the lower Sutlej River. Timing of downcutting correlates with centennial-long weaker monsoon periods that were characterized by lower rainfall. I explain this relationship by taking sediment flux and rainfall dynamics into account: High sediment flux derived from the upstream parts of the Sutlej River during strong monsoon phases prevents fluvial incision due to oversaturation the fluvial sediment-transport capacity. In contrast, weaker monsoons result in a lower sediment flux that allows incision in the low-elevation parts of the Sutlej River. N2 - Die Indisch-Eurasische Kontinentalkollision ist ein beeindruckendes Beispiel für weitreichenden, tektonisch kontrollierten klimatischen Einfluss. Um den Einfluss von klimatisch bedingter Erosion auf die Orogenese zu testen, habe ich erosive Oberflächenprozesse, Monsunvariationen und fluviatilen Massentransfer auf verschiedenen Zeitscheiben analysiert. Um genaue Niederschläge auf einem grossen Raum zu quantifizieren, habe ich durch Wettersatelliten aufgezeichnete passive Mikrowellendaten für die letzten zehn Jahre untersucht. Erstaunlicherweise variiert der Niederschlag nur wenig von Jahr zu Jahr und ein Großteil des Regens wird durch orographische Effekte gesteuert. Im Jahre 2002 allerdings, habe ich ein abnormal starkes Monsunjahr feststellen können. Zu dieser Zeit ist der Monsunniederschlag weiter in das Gebirge vorgedrungen und hat viele Massenbewegungen wie z.B. Schuttströme und Muren ausgelöst. Dabei verdoppelten sich die Erosionsraten im Einzugsgebiet. Ich zeige anhand von Satellitenbildern, aufgenommen vor und nach dem Monsun, dass sich hierbei vor allen Dingen kleine, neue Flußläufe entwickeln. In höher gelegenen, normalerweise trockenen Gebieten findet man auch Überreste von enormen Bergstürzen und dahinter aufgestauten Seen. Datierungen dieser geomorphologischen Phänomene zeigen, dass sie nur in zwei Phasen während der letzten 30.000 Jahre auftreten: Im späten Pleistozän vor rund 27.000 Jahren und im frühen Holozän vor 8000 Jahre. Diese Zeiten sind durch einen starken Monsun, der durch die Insolation kontrolliert wird, gekennzeichnet. Analog zur Niederschlagsverteilung im Jahre 2002 ist der Monsun aber nicht nur für ein Jahr, sondern mehrere hundert oder tausend Jahre lang kontinuierlich in die heute ariden Gebiete vorgedrungen. Der erhöhte Porenwasserdruck und die erstarkten Flüsse lösten dann durch laterale Unterschneidung große Bergstürze aus, die zu keiner anderen Zeit beobachtet wurden. Die temporären Becken in den Hochlagen, die durch Bergstürze entstanden sind, entstehen in Feuchtphasen und werden in schwächeren Monsunphasen von Flüssen abgetragen und verdeutlicht die komplexe Beziehung zwischen Klima und Massentransfer verdeutlicht. ---- Anmerkung: Der Autor wurde 2005 mit dem 7. Publikationspreis des Leibniz-Kollegs Potsdam für Nachwuchswissenschaftler/innen in Naturwissenschaften ausgezeichnet. T2 - Late quaternary climate changes and landscape evolution in the Northwest Himalaya : geomorphologic processes in the Indian Summer Monsoon Domain KW - Monsun KW - Himalaja KW - Klima KW - Indien KW - Bergstürze KW - Geomorphologie KW - Asian monsoon KW - Himalaya KW - climate KW - landslides KW - geomorphology Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001956 ER -