TY - JOUR A1 - Heck, Christian A1 - Michaeli, Yael A1 - Bald, Ilko A1 - Ebenstein, Yuval T1 - Analytical epigenetics BT - single-molecule optical detection of DNA and histone modifications JF - Current Opinion in Biotechnology N2 - The field of epigenetics describes the relationship between genotype and phenotype, by regulating gene expression without changing the canonical base sequence of DNA. It deals with molecular genomic information that is encoded by a rich repertoire of chemical modifications and molecular interactions. This regulation involves DNA, RNA and proteins that are enzymatically tagged with small molecular groups that alter their physical and chemical properties. It is now clear that epigenetic alterations are involved in development and disease, and thus, are the focus of intensive research. The ability to record epigenetic changes and quantify them in rare medical samples is critical for next generation diagnostics. Optical detection offers the ultimate single-molecule sensitivity and the potential for spectral multiplexing. Here we review recent progress in ultrasensitive optical detection of DNA and histone modifications. Y1 - 2018 U6 - https://doi.org/10.1016/j.copbio.2018.09.006 SN - 0958-1669 SN - 1879-0429 VL - 55 SP - 151 EP - 158 PB - Elsevier CY - London ER - TY - JOUR A1 - Jiang, Yi A1 - Mansfeld, Ulrich A1 - Fang, Liang A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Temperature-induced evolution of microstructures on poly[ethylene-co-(vinyl acetate)] substrates switches their underwater wettability JF - Materials & design N2 - Material surfaces with tailored aerophobicity are crucial for applications where gas bubble wettability has to be controlled, e.g., gas storage and transport, electrodes, bioreactors or medical devices. Here, we present switchable underwater aerophobicity of hydrophobic polymeric substrates, which respond to heat with multilevel micro-and nanotopographical changes. The cross-linked poly[ethylene-co-(vinyl acetate)] substrates possess arrays of microcylinders with a nanorough top surface. It is hypothesized that the specific micro-/nanotopography of the surface allows trapping of a water film at the micro interspace and in this way generates the aerophobic behavior. The structured substrates were programmed to a temporarily stable, nanoscale flat substrate showing aerophilic behavior. Upon heating, the topographical changes caused a switch in contact angle from aerophilic to aerophobic for approaching air bubbles. In this way, the initial adhesion of air bubbles to the programmed flat substrate could be turned into repellence for the recovered substrate surface. The temperature at which the repellence of air bubbles starts can be adjusted from 58 +/- 3 degrees C to 73 +/- 3 degrees C by varying the deformation temperature applied during the temperature-memory programming procedure. The presented actively switching polymeric substrates are attractive candidates for applications, where an on-demand gas bubble repellence is advantageous. (c) 2018 Helmholtz-Zentrum Geesthacht, Zentrum fur Material- und Kustenforschung. Published by Elsevier Ltd. KW - Aerophobicity KW - Temperature-memory effect KW - Switchable wettability KW - Air bubble repellence KW - Thermo-responsive polymer Y1 - 2018 U6 - https://doi.org/10.1016/j.matdes.2018.12.002 SN - 0264-1275 SN - 1873-4197 VL - 163 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Xu, Xiao A1 - Angioletti-Uberti, Stefano A1 - Lu, Yan A1 - Dzubiella, Joachim A1 - Ballauff, Matthias T1 - Interaction of Proteins with Polyelectrolytes BT - Comparison of Theory to Experiment JF - Langmuir N2 - We discuss recent investigations of the interaction of polyelectrolytes with proteins. In particular, we review our recent studies on the interaction of simple proteins such as human serum albumin (HSA) and lysozyme with linear polyelectrolytes, charged dendrimers, charged networks, and polyelectrolyte brushes. In all cases discussed here, we combined experimental work with molecular dynamics (MD) simulations and mean-field theories. In particular, isothermal titration calorimetry (ITC) has been employed to obtain the respective binding constants K-b and the Gibbs free energy of binding. MD simulations with explicit counterions but implicit water demonstrate that counterion release is the main driving force for the binding of proteins to strongly charged polyelectrolytes: patches of positive charges located on the surface of the protein become multivalent counterions of the polyelectrolyte, thereby releasing a number of counterions condensed on the polyelectrolyte. The binding Gibbs free energy due to counterion release is predicted to scale with the logarithm of the salt concentration in the system, which is verified by both simulations and experiment. In several cases, namely, for the interaction of proteins with linear polyelectrolytes and highly charged hydrophilic dendrimers, the binding constant could be calculated from simulations to very good approximation. This finding demonstrated that in these cases explicit hydration effects do not contribute to the Gibbs free energy of binding. The Gibbs free energy can also be used to predict the kinetics of protein uptake by microgels for a given system by applying dynamic density functional theory. The entire discussion demonstrates that the direct comparison of theory with experiments can lead to a full understanding of the interaction of proteins with charged polymers. Possible implications for applications, such as drug design, are discussed. Y1 - 2018 U6 - https://doi.org/10.1021/acs.langmuir.8b01802 SN - 0743-7463 VL - 35 IS - 16 SP - 5373 EP - 5391 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Lützow, Karola A1 - Hommes-Schattmann, Paul J. A1 - Neffe, Axel T. A1 - Ahmad, Bilal A1 - Williams, Gareth R. A1 - Lendlein, Andreas T1 - Perfluorophenyl azide functionalization of electrospun poly(para-dioxanone) JF - Polymers for advanced technologies N2 - Strategies to surface-functionalize scaffolds by covalent binding of biologically active compounds are of fundamental interest to control the interactions between scaffolds and biomolecules or cells. Poly(para-dioxanone) (PPDO) is a clinically established polymer that has shown potential as temporary implant, eg, for the reconstruction of the inferior vena cava, as a nonwoven fiber mesh. However, PPDO lacks suitable chemical groups for covalent functionalization. Furthermore, PPDO is highly sensitive to hydrolysis, reflected by short in vivo half-life times and degradation during storage. Establishing a method for covalent functionalization without degradation of this hydrolyzable polymer is therefore important to enable the surface tailoring for tissue engineering applications. It was hypothesized that treatment of PPDO with an N-hydroxysuccinimide ester group bearing perfluorophenyl azide (PFPA) under UV irradiation would allow efficient surface functionalization of the scaffold. X-ray photoelectron spectroscopy and attenuated total reflectance Fourier-transformed infrared spectroscopy investigation revealed the successful binding, while a gel permeation chromatography study showed that degradation did not occur under these conditions. Coupling of a rhodamine dye to the N-hydroxysuccinimide esters on the surface of a PFPA-functionalized scaffold via its amine linker showed a homogenous staining of the PPDO in laser confocal microscopy. The PFPA method is therefore applicable even to the surface functionalization of hydrolytically labile polymers, and it was demonstrated that PFPA chemistry may serve as a versatile tool for the (bio-)functionalization of PPDO scaffolds. KW - biological applications of polymers KW - fibers KW - functionalization of polymers KW - microstructure Y1 - 2018 U6 - https://doi.org/10.1002/pat.4331 SN - 1042-7147 SN - 1099-1581 VL - 30 IS - 5 SP - 1165 EP - 1172 PB - Wiley CY - Hoboken ER - TY - GEN A1 - Schönemann, Eric A1 - Laschewsky, André A1 - Rosenhahn, Axel T1 - Exploring the long-term hydrolytic behavior of zwitterionic polymethacrylates and polymethacrylamides T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) (“sulfobetaine methacrylate”), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) (“sulfobetaine methacrylamide”) as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1091 KW - polyzwitterions KW - stability KW - polymer degradation KW - hydrolysis KW - polysulfobetaine KW - polysulfabetaine KW - anti-fouling materials Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473052 SN - 1866-8372 IS - 1091 ER - TY - JOUR A1 - Czarnecki, Maciej A1 - Wessig, Pablo T1 - Scaling Up UV-Mediated Intramolecular Photodehydro-Diels-Alder Reactions Using a Homemade High-Performance Annular Continuous-Flow Reactor JF - Organic Process Research & Development N2 - Here we present a self-made annular continuous-flow reactor that can be used in the UV/vis range in an internal numbering-up manner. As a model reaction, we chose a powerful batch-scale-limited benzoannelation method, namely, an intramolecular photodehydro-Diels-Alder (IMPDDA) reaction. The scale-up potential of this particular photochemical benchmark reaction toward the preparation of macrocylic (1,7)naphthalenophanes by variation of selected flow parameters is presented. KW - flow photochemistry KW - photocycloaddition KW - photodehydro-Diels-Alder reaction KW - scale-up Y1 - 2018 U6 - https://doi.org/10.1021/acs.oprd.8b00353 SN - 1083-6160 SN - 1520-586X VL - 22 IS - 12 SP - 1823 EP - 1827 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Hoang, Hoa T. A1 - Mertens, Monique A1 - Wessig, Pablo A1 - Sellrie, Frank A1 - Schenk, Jörg A. A1 - Kumke, Michael Uwe T1 - Antibody Binding at the Liposome-Water Interface BT - a FRET Investigation toward a Liposome-Based Assay JF - ACS Omega N2 - Different signal amplification strategies to improve the detection sensitivity of immunoassays have been applied which utilize enzymatic reactions, nanomaterials, or liposomes. The latter are very attractive materials for signal amplification because liposomes can be loaded with a large amount of signaling molecules, leading to a high sensitivity. In addition, liposomes can be used as a cell-like "bioscaffold" to directly test recognition schemes aiming at cell-related processes. This study demonstrates an easy and fast approach to link the novel hydrophobic optical probe based on [1,3]dioxolo[4,5-f]-[1,3]benzodioxole (DBD dye mm239) with tunable optical properties to hydrophilic recognition elements (e.g., antibodies) using liposomes for signal amplification and as carrier of the hydrophobic dye. The fluorescence properties of mm239 (e.g., long fluorescence lifetime, large Stokes shift, high photostability, and high quantum yield), its high hydrophobicity for efficient anchoring in liposomes, and a maleimide bioreactive group were applied in a unique combination to build a concept for the coupling of antibodies or other protein markers to liposomes (coupling to membranes can be envisaged). The concept further allowed us to avoid multiple dye labeling of the antibody. Here, anti-TAMRA-antibody (DC7-Ab) was attached to the liposomes. In proof-of-concept, steady-state as well as time-resolved fluorescence measurements (e.g., fluorescence depolarization) in combination with single molecule detection (fluorescence correlation spectroscopy, FCS) were used to analyze the binding interaction between DC7-Ab and liposomes as well as the binding of the antigen rhodamine 6G (R6G) to the antibody. Here, the Forster resonance energy transfer (FRET) between mm239 and R6G was monitored. In addition to ensemble FRET data, single-molecule FRET (PIE-FRET) experiments using pulsed interleaved excitation were used to characterize in detail the binding on a single-molecule level to avoid averaging out effects. KW - energy-transfer KW - immunoassay KW - complexes KW - probes Y1 - 2018 U6 - https://doi.org/10.1021/acsomega.8b03016 SN - 2470-1343 VL - 3 IS - 12 SP - 18109 EP - 18116 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Schulze, Sven A1 - Wehrhold, Michel A1 - Hille, Carsten T1 - Femtosecond-pulsed laser written and etched fiber bragg gratings for fiber-optical biosensing T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We present the development of a label-free, highly sensitive fiber-optical biosensor for online detection and quantification of biomolecules. Here, the advantages of etched fiber Bragg gratings (eFBG) were used, since they induce a narrowband Bragg wavelength peak in the reflection operation mode. The gratings were fabricated point-by-point via a nonlinear absorption process of a highly focused femtosecond-pulsed laser, without the need of prior coating removal or specific fiber doping. The sensitivity of the Bragg wavelength peak to the surrounding refractive index (SRI), as needed for biochemical sensing, was realized by fiber cladding removal using hydrofluoric acid etching. For evaluation of biosensing capabilities, eFBG fibers were biofunctionalized with a single-stranded DNA aptamer specific for binding the C-reactive protein (CRP). Thus, the CRP-sensitive eFBG fiber-optical biosensor showed a very low limit of detection of 0.82 pg/L, with a dynamic range of CRP detection from approximately 0.8 pg/L to 1.2 µg/L. The biosensor showed a high specificity to CRP even in the presence of interfering substances. These results suggest that the proposed biosensor is capable for quantification of CRP from trace amounts of clinical samples. In addition, the adaption of this eFBG fiber-optical biosensor for detection of other relevant analytes can be easily realized. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1073 KW - fiber Bragg gratings KW - ultra-fast laser inscription KW - fiber etching KW - nanostructure fabrication KW - fiber-optical sensors KW - aptamers KW - C-reactive Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472692 SN - 1866-8372 IS - 1073 ER - TY - GEN A1 - Schneider, Matthias A1 - Günter, Christina A1 - Taubert, Andreas T1 - Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating BT - Towards automated biomaterials fabrication T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1057 KW - 3D printing KW - dip-coating KW - poly(lactic acid) KW - PLA KW - calcium phosphate KW - gelatin KW - chitosan KW - hydrogel KW - calcium phosphate hybrid material KW - biomaterials Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-474427 SN - 1866-8372 IS - 1057 ER - TY - JOUR A1 - Sun, Fu A1 - Dong, Kang A1 - Osenberg, Markus A1 - Hilger, Andre A1 - Risse, Sebastian A1 - Lu, Yan A1 - Kamm, Paul H. A1 - Klaus, Manuela A1 - Markoetter, Henning A1 - Garcia-Moreno, Francisco A1 - Arlt, Tobias A1 - Manke, Ingo T1 - Visualizing the morphological and compositional evolution of the interface of InLi-anode|thio-LISION electrolyte in an all-solid-state Li-S cell by in operando synchrotron X-ray tomography and energy dispersive diffraction JF - Journal of materials chemistry : A, Materials for energy and sustainability N2 - Dynamic and direct visualization of interfacial evolution is helpful in gaining fundamental knowledge of all-solid-state-lithium battery working/degradation mechanisms and clarifying future research directions for constructing next-generation batteries. Herein, in situ and in operando synchrotron X-ray tomography and energy dispersive diffraction were simultaneously employed to record the morphological and compositional evolution of the interface of InLi-anode|sulfide-solid-electrolyte during battery cycling. Compelling morphological evidence of interfacial degradation during all-solid-state-lithium battery operation has been directly visualized by tomographic measurement. The accompanying energy dispersive diffraction results agree well with the observed morphological deterioration and the recorded electrochemical performance. It is concluded from the current investigation that a fundamental understanding of the phenomena occurring at the solid-solid electrode|electrolyte interface during all-solid-state-lithium battery cycling is critical for future progress in cell performance improvement and may determine its final commercial viability. Y1 - 2018 U6 - https://doi.org/10.1039/c8ta08821g SN - 2050-7488 SN - 2050-7496 VL - 6 IS - 45 SP - 22489 EP - 22496 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Zivanovic, Vesna A1 - Kochovski, Zdravko A1 - Arenz, Christoph A1 - Lu, Yan A1 - Kneipp, Janina T1 - SERS and Cryo-EM Directly Reveal Different Liposome Structures during Interaction with Gold Nanoparticles JF - The journal of physical chemistry letters N2 - The combination of gold nanoparticles with liposomes is important for nano- and biotechnology. Here, we present direct, label-free characterization of liposome structure and composition at the site of its interaction with citrate-stabilized gold nanoparticles by surface-enhanced Raman scattering (SERS) and cryogenic electron microscopy (cryo-EM). Evidenced by the vibrational spectra and cryo-EM, the gold nanoparticles destroy the bilayer structure of interacting liposomes in the presence of a high amount of citrate, while at lower citrate concentration the nanoparticles interact with the surface of the intact liposomes. The spectra of phosphatidylcholine and phosphatidylcholine/sphingomyelin liposomes show that at the site of interaction the lipid chains are in the gel phase. The SERS spectra indicate that cholesterol has strong effects on the contacts of the vesicles with the nanoparticles. By combining cryo-EM and SERS, the structure and properties of lipid nanoparticle composites could be tailored for the development of drug delivery systems. Y1 - 2018 U6 - https://doi.org/10.1021/acs.jpclett.8b03191 SN - 1948-7185 VL - 9 IS - 23 SP - 6767 EP - 6772 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schultze, Christiane A1 - Schmidt, Bernd T1 - Ring-closing-metathesis-based synthesis of annellated coumarins from 8-allylcoumarins JF - Beilstein journal of organic chemistry N2 - 8-Allylcoumarins are conveniently accessible through a microwave-promoted tandem Claisen rearrangement/Wittig olefination/cyclization sequence. They serve as a versatile platform for the annellation of five- to seven-membered rings using ring-closing olefin metathesis (RCM). Furano-, pyrano-, oxepino- and azepinocoumarins were synthesized from the same set of precursors using Ru-catalyzed double bond isomerizations and RCM in a defined order. One class of products, pyrano[2,3-f]chromene-2,8-diones, were inaccessible through direct RCM of an acrylate, but became available from the analogous allyl ether via an assisted tandem catalytic RCM/allylic oxidation sequence. KW - coumarins KW - heterocycles KW - isomerization KW - olefin metathesis KW - ruthenium Y1 - 2018 U6 - https://doi.org/10.3762/bjoc.14.278 SN - 1860-5397 VL - 14 SP - 2991 EP - 2998 PB - Beilstein-Institut zur Förderung der Chemischen Wissenschaften CY - Frankfurt, Main ER - TY - JOUR A1 - Nguyen, Hiep N. A1 - Lee, Hyeunjoo A1 - Audörsch, Stephan A1 - Reznichenko, Alexander L. A1 - Nawara-Hultzsch, Agnieszka J. A1 - Schmidt, Bernd A1 - Hultzsch, Kai C. T1 - Asymmetric Intra- and Intermolecular Hydroamination Catalyzed by 3,3′-Bis(trisarylsilyl)- and 3,3′-Bis(arylalkylsilyl)-Substituted Binaphtholate Rare-Earth-Metal Complexes JF - Organometallics N2 - The series of novel 3,3′-bis(trisarylsilyl)- and 3,3′-bis(arylalkylsilyl)-substituted binaphtholate rare-earth-metal complexes 2a–i (SiR3 = Si(o-biphenylene)Ph (a), SiCyPh2 (b), Si-t-BuPh2 (c), Si(i-Pr)3 (d), SiCy2Ph (e), Si(2-tolyl)Ph2 (f), Si(4-t-Bu-C6H4)3 (g), Si(4-MeO-C6H4)Ph2 (h), SiBnPh2 (i)) have been prepared via arene elimination from [Ln(o-C6H4CH2NMe2)3] (Ln = Y, Lu) and the corresponding 3,3′-bis(silyl)-substituted binaphthol. The complexes exhibit high catalytic activity in the hydroamination/cyclization of aminoalkenes, with activities exceeding 1000 h–1 for (R)-2f-Ln, (R)-2g-Ln, and (R)-2h-Ln in the cyclization of 2,2-diphenylpent-4-enylamine (3a) at 25 °C, while the rigid dibenzosilole-substituted complexes (R)-2a-Ln and the triisopropylsilyl-substituted complexes (R)-2d-Ln exhibited the lowest activity in the range of 150–270 h–1. Catalysts (R)-2b-Lu, (R)-2c-Lu, (R)-2f-Lu, and (R)-2i-Lu provide the highest selectivities for the majority of the substrates, while the yttrium congeners are usually less selective. The highest enantioselectivities of 96% ee were observed using (R)-2a-Lu and (R)-2c-Lu in the cyclization of (4E)-2,2,5-triphenylpent-4-enylamine (9). The reactions show apparently zero-order rate dependence on substrate concentration and first-order rate dependence on catalyst concentration, with some reactions exhibiting a slightly accelerated rate at high conversion due to a shift in the equilibrium between a less active, higher coordinate catalyst species in favor of a more active, lower coordinate species as a result of weaker binding of the hydroamination product in comparison to the aminoalkene substrate. The shift in equilibrium from the higher to the lower coordinate species is also entropically favored at elevated temperatures, which results in an unusual increase in selectivity in the cyclization of 2,2-dimethylpent-4-enylamine (3d), presumably due to a higher selectivity of the lower coordinate catalyst species. All binaphtholate yttrium complexes, except (R)-2a-Y, are catalytically active in the intermolecular hydroamination of benzylamines with terminal alkenes. The highest selectivity of 66% ee was observed for the reaction of benzylamine with 4-phenyl-1-butene using (R)-2h-Y at 110 °C. Y1 - 2018 U6 - https://doi.org/10.1021/acs.organomet.8b00510 SN - 0276-7333 SN - 1520-6041 VL - 37 IS - 23 SP - 4358 EP - 4379 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Paramonov, Guennaddi K. A1 - Klamroth, Tillmann A1 - Lu, H. Z. A1 - Bandrauk, Andre D. T1 - Quantum dynamics, isotope effects, and power spectra of H-2(+) and HD+ excited to the continuum by strong one-cycle laser pulses: Three-dimensional non-Born-Oppenheimer simulations JF - Physical review : A, Atomic, molecular, and optical physics N2 - Non-Born-Oppenheimer quantum dynamics of H-2(+) and HD+ excited by single one-cycle laser pulses linearly polarized along the molecular (z) axis have been studied within a three-dimensional model, including the internuclear distance R and electron coordinates z and rho, by means of the numerical solution of the time-dependent Schrodinger equation on the timescale of about 200 fs. Laser carrier frequencies corresponding to the wavelengths of lambda(l) = 400 and 50 nm have been used and the amplitudes of the pulses have been chosen such that the energies of H-2(+) and HD+ are above the dissociation threshold after the ends of the laser pulses. It is shown that excitation of H-2(+) and HD+ above the dissociation threshold is accompanied by formation of vibrationally "hot" and "cold" ensembles of molecules. Dissociation of vibrationally "hot" molecules does not prevent the appearance of post-laser-pulse electronic oscillations, parallel z oscillations, and transversal rho oscillations. Moreover, dissociation of "hot" molecules does not influence characteristic frequencies of electronic z and rho oscillations. The main difference between the laser-induced quantum dynamics of homonuclear H-2(+) and its heteronuclear isotope HD+ is that fast post-laser-pulse electronic z oscillations in H-2(+) are regularly shaped with the period of tau(shp) approximate to 30 fs corresponding to nuclear oscillations in H-2(+), while electronic z oscillations in HD+ arise as "echo pulses" of its initial excitation and appear with the period of tau(echo) approximate to 80 fs corresponding to nuclear motion in HD+. Accordingly, corresponding power spectra of nuclear motion contain strong low-frequency harmonics at omega(shp) = 2 pi/tau(shp) in H2(+) and omega(echo) = 2 pi/tau(echo) in HD+. Power spectra related to both electronic and nuclear motion have been calculated in the acceleration form. Both higher- and lower-order harmonics are generated at the laser wavelength lambda(l) = 400 nm, while only lower-order harmonics are well pronounced at lambda(l) = 50 nm. It is also shown that a rationalized harmonic order, defined in terms of the frequency of the laser-induced electronic z oscillations, agrees with the concept of inversion symmetry for electronic motion in diatomic molecules. Y1 - 2018 U6 - https://doi.org/10.1103/PhysRevA.98.063431 SN - 2469-9926 SN - 2469-9934 VL - 98 IS - 6 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Balderas-Valadez, Ruth Fabiola A1 - Estevez-Espinoza, J. O. A1 - Salazar-Kuri, U. A1 - Pacholski, Claudia A1 - Mochan, Wolf Luis A1 - Agarwal, Vivechana T1 - Fabrication of ordered tubular porous silicon structures by colloidal lithography and metal assisted chemical etching BT - SERS performance of 2D porous silicon structures JF - Applied surface science : a journal devoted to applied physics and chemistry of surfaces and interfaces N2 - Fabrication of well-ordered porous silicon tubular structures using colloidal lithography and metal assisted chemical etching is reported. A continuous hexagonal hole/particle gold pattern was designed over monocrystalline silicon through deposition of polyNIPAM microspheres, followed by the surface decoration with gold nanoparticles and thermal treatment. An etching reaction with HF, ethanol and H2O2 dissolved the silicon in contact with the metal nanoparticles (NP), creating a porous tubular array in the "off-metal area". The morphological characterization revealed the formation of a cylindrical hollow porous tubular shape with external and internal diameter of approx. 900 nm and 400 nm respectively, though it can be tuned to other desired sizes by choosing an appropriate dimension for the microspheres. The porous morphology and optical properties were studied as a function of resistivity of silicon substrates. Compared to two different gold templates on cSi and nontubular porous pillar structures, porous silicon tubular framework revealed a maximum surface enhanced Raman scattering enhancement factor of 10(6) for the detection of 6-mercaptopurine (6-MP). Due to the large surface area available for any surface modification, open nanostructured platforms such as those studied here have potential applications in the field of reflection/photoluminescene and SERS based optical bio-/chemical sensors. KW - SERS KW - Porous silicon KW - MACE KW - Colloidal lithography KW - PolyNIPAM KW - 6-Mercaptopurine Y1 - 2018 U6 - https://doi.org/10.1016/j.apsusc.2018.08.120 SN - 0169-4332 SN - 1873-5584 VL - 462 SP - 783 EP - 790 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Werner, Peter T1 - Untersuchung stark-streuender Polymersuspensionen mittels optischer Methoden Y1 - 2018 ER - TY - THES A1 - Zimmermann, Marc T1 - Multifunctional patchy silica particles via microcontact printing T1 - Multifunktionale Patchy Silika Partikel mithilfe des Mikrokontaktdruckverfahrens N2 - This research addressed the question, if it is possible to simplify current microcontact printing systems for the production of anisotropic building blocks or patchy particles, by using common chemicals while still maintaining reproducibility, high precision and tunability of the Janus-balance Chapter 2 introduced the microcontact printing materials as well as their defined electrostatic interactions. In particular polydimethylsiloxane stamps, silica particles and high molecular weight polyethylenimine ink were mainly used in this research. All of these components are commercially available in large quantities and affordable, which gives this approach a huge potential for further up-scaling developments. The benefits of polymeric over molecular inks was described including its flexible influence on the printing pressure. With this alteration of the µCP concept, a new method of solvent assisted particle release mechanism enabled the switch from two-dimensional surface modification to three-dimensional structure printing on colloidal silica particles, without changing printing parameters or starting materials. This effect opened the way to use the internal volume of the achieved patches for incorporation of nano additives, introducing additional physical properties into the patches without alteration of the surface chemistry. The success of this system and its achievable range was further investigated in chapter 3 by giving detailed information about patch geometry parameters including diameter, thickness and yield. For this purpose, silica particles in a size range between 1µm and 5µm were printed with different ink concentrations to change the Janus-balance of these single patched particles. A necessary intermediate step, consisting of air-plasma treatment, for the production of trivalent particles using "sandwich" printing was discovered and comparative studies concerning the patch geometry of single and double patched particles were conducted. Additionally, the usage of structured PDMS stamps during printing was described. These results demonstrate the excellent precision of this approach and opens the pathway for even greater accuracy as further parameters can be finely tuned and investigated, e.g. humidity and temperature during stamp loading. The performance of these synthesized anisotropic colloids was further investigated in chapter 4, starting with behaviour studies in alcoholic and aqueous dispersions. Here, the stability of the applied patches was studied in a broad pH range, discovering a release mechanism by disabling the electrostatic bonding between particle surface and polyelectrolyte ink. Furthermore, the absence of strong attractive forces between divalent particles in water was investigated using XPS measurements. These results lead to the conclusion that the transfer of small PDMS oligomers onto the patch surface is shielding charges, preventing colloidal agglomeration. However, based on this knowledge, further patch modifications for particle self-assembly were introduced including physical approaches using magnetic nano additives, chemical patch functionalization with avidin-biotin or the light responsive cyclodextrin-arylazopyrazoles coupling as well as particle surface modification for the synthesis of highly amphiphilic colloids. The successful coupling, its efficiency, stability and behaviour in different solvents were evaluated to find a suitable coupling system for future assembly experiments. Based on these results the possibility of more sophisticated structures by colloidal self-assembly is given. Certain findings needed further analysis to understand their underlying mechanics, including the relatively broad patch diameter distribution and the decreasing patch thickness for smaller silica particles. Mathematical assumptions for both effects are introduced in chapter 5. First, they demonstrate the connection between the naturally occurring particle size distribution and the broadening of the patch diameter, indicating an even higher precision for this µCP approach. Second, explaining the increase of contact area between particle and ink surface due to higher particle packaging, leading to a decrease in printing pressure for smaller particles. These calculations ultimately lead to the development of a new mechanical microcontact printing approach, using centrifugal forces for high pressure control and excellent parallel alignment of printing substrates. First results with this device and the comparison with previously conducted by-hand experiments conclude this research. It furthermore displays the advantages of such a device for future applications using a mechanical printing approach, especially for accessing even smaller nano particles with great precision and excellent yield. In conclusion, this work demonstrates the successful adjustment of the µCP approach using commercially available and affordable silica particles and polyelectrolytes for high flexibility, reduced costs and higher scale-up value. Furthermore, its was possible to increase the modification potential by introducing three-dimensional patches for additional functionalization volume. While keeping a high colloidal stability, different coupling systems showed the self-assembly capabilities of this toolbox for anisotropic particles. N2 - Diese Forschungsarbeit befasste sich mit der Frage, ob es möglich ist, bekannte Mikrokontaktdruckverfahren, zur Herstellung von anisotropen Bausteinen (Patchy Partikel), weiter zu vereinfachen. Dabei sollten gängige Chemikalien verwendet werden ohne einen Verlust in Reproduzierbarkeit, hoher Präzision und Feineinstellung der Janus-Balance zu erleiden. In Kapitel 2 wurden die verwendeten Mikrokontaktdruckmaterialien sowie deren elektrostatische Wechselwirkungen vorgestellt. Insbesondere handelte es sich dabei um Polydimethylsiloxan Stempel, Silikapartikel und hoch molekulare Polyethylenimin Tinte. All diese Produkte sind kommerziel in großen und bezahlbaren Mengen erhältlich. Nicht nur die Vorteile von polymeren Tinten im Gegensatz zu molekularen Tinten wurde beschrieben, sondern auch die hohe Flexibilität dieses Verfahrens bezüglich der verwendeten Druckkraft. Mit dieser Anpassung des Mikrokontaktdrucks, wurde eine neue Methode der Lösungsmittel unterstützten Partikelablösung ermöglicht, mit deren Hilfe ein einfaches Schalten zwischen zwei dimensionaler Oberflächenfunktionalisierung und drei dimensionalem Strukturdrucks möglich war, ohne Druckparameter oder Startchemikalien zu verändern. Dadurch konnte neu erschaffenes internes Volumen verwendet werden um Nanoadditive einzuführen und so zusätzliche physikalische Eigenschaften zu integrieren, ohne die Oberflächenchemie der Patches verändert wurde. Der Erfolg dieses Systems und seine erreichbaren Grenzen wurde gründlichst in Kapitel 3 erforscht, indem detaillierte Geometrieparameter der Patches einschließlich Durchmesser, Dicke und Ausbeute, erworben wurden. Hierfür wurden Silikapartikel in einem Größenbereich von 1µm bis 5µm mit unterschiedlichen Tintenkonzentrationen bedruckt, um Veränderungen erforschen zu können. Ein notwendiger Luftplasma Ätzschritt für die Produktion von trivalenten Partikeln, mit Hilfe des sogenannten ,,Sandwich‘‘-Drucks, wurde erläutert und vergleichende Untersuchen von einfach und zweifach modifizierten Bausteinen wurden durchgeführt. Zusätzlich dazu, wurde die Verwendung von strukturierten Stempel beschrieben. Die Ergebnisse verdeutlichen die exzellente Genauigkeit dieser Methode und öffnet den Weg um eine hoch höhere Präzision zu erreichen da weitere Parametere genau eingestellt und untersucht werden können, z.B. Luftfeuchtigkeit und Temperature während der Stempelbeladung. Die Performance der herstellten anisotropen Partikel wurde in Kapitel 4 mit Verhaltensstudien in alkoholischen und wässrigen Dispersionen getestet. Dabei wurde die Stabilität der Oberflächenfunktionalisierungen in einem breiten pH Bereich untersucht. Dadurch wurde ein Ablösungsmechanismus bei sehr hohen bzw. niedrigen pH-Werten entdeckt, der zur Deaktivierung elektrostatischer Wechselwirkungen zwischen Partikeloberfläche und Polyelektrolyte Tinte führte. Desweitern wurden die Abwesenheit starker Wechselwirkung der divalenten Partikel in Wasser mit Hilfe von XPS untersucht. Das Resultat zeigte, dass der Transfer kleinster PDMS Oligomere auf die Patchoberfläche zu einer Ladungsabschirmung führte. Dadurch konnte Agglomeration verhindert werden. Aufgrund dieser Ergebnisse wurden weitere Modifikationen für Partikelassemblierung durchgeführt. Hierfür wurde die Einführung von magnetischen Nanoadditiven, die Funktionalisierung mit Avidin-Biotin sowie dem Lichtschaltbaren Cyclodextrin-Arylazopyrazol Komplexen und die Partikeloberflächenfunktionalisierung zur Herstellung amphiphiler Teilchen untersucht. Die Effizienz der Kopplung, deren Stabilität sowie das Verhalten in unterschiedlichen Lösungsmittel wurde beschrieben. Basierend auf diesen Ergebnissen können noch anspruchsvollere Strukturen durch kolloidale Selbstassemblierung erzeugt werden. Einige Ergebnisse dieser Arbeit benötigten zusätzlicher Analyse um die zugrundeliegenden Mechaniken verstehen zu können. Dazu gehörte die relative hohe Streuung des Durchmessers für unterschiedliche Partikelsysteme, sowie das Ausdünnen des Patches mit kleineren Silikapartikeln. Mathematische Modelle in Kapitel 5 beschreiben beide Effekte. Dadurch war es möglich einen Zusammenhang zwischen der natürlichen Partikelgrößenverteilung sowie der Verbreitung des Patchdurchmessers festzustellen. Des Weiteren konnte eine Verkleinerung der Druckkraft durch eine Erhöhung der Packungsdichte für kleine Partikel beschrieben werden, wodurch eine Erklärung der Ausdünnung möglich war. All diese Berechnung führten schlussendlich zur Entwicklung eines neuen mechanischen Mikrokontaktdruckverfahrens, welches mit Hilfe von Zentrifugalkräften eine hohe Druckkontrolle und eine exzellente parallele Ausrichtung zwischen den Substraten ermöglicht. Erste Ergebnisse, sowie deren Vergleich mit bisher erhaltenen Resultaten schließen diese Forschung ab. Des Weiteren zeigt es die Vorteile einer solchen Vorrichtung für kommende Applikationen, besonders um noch kleinere Nanopartikel mit einer hohen Präzision modifizieren zu können. Zusammenfassend ist zu sagen, dass diese Forschung die erfolgreiche Anpassung des Mikrokontaktdruckverfahrens mit kommerziell erhältlichen und bezahlbaren Silikapartikeln und Polyelektrolyten demonstriert, um hohe Flexibilität, reduzierte Kosten und ein erweitertes Skalierungspotential zu bieten. Zusätzlich ist es gelungen, die Funktionalisierungsdichte zu erhöhen, indem drei dimensionaler Strukturdruck bisher ungenutztes Volumen schaffen konnte. Während eine hohe kolloidale Stabilität erhalten blieb, ist es gelungen unterschiedliche Kopplungssysteme zu nutzen, um das Selbstorganisationspotential dieser Toolbox für anisotrope Partikel aufzuzeigen. KW - patchy particles KW - microcontact printing KW - silica particles KW - anisotropic colloids KW - polyelectrolytes KW - Patchy Partikel KW - Mikrokontaktdruck KW - Silika Partikel KW - Anisotrope Kolloide KW - Polyelektrolyte Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427731 ER - TY - JOUR A1 - Abbas, Ioana M. A1 - Vranic, Marija A1 - Hoffmann, Holger A1 - El-Khatib, Ahmed H. A1 - Montes-Bayón, María A1 - Möller, Heiko Michael A1 - Weller, Michael G. T1 - Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺ JF - International Journal of Molecular Sciences N2 - Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others. KW - hepcidin-25 KW - copper KW - nickel KW - copper complex KW - ATCUN motif KW - metal complex KW - MS KW - NMR structure KW - metal peptide KW - metalloprotein KW - metallopeptide KW - isomerization KW - racemization KW - purity KW - reference material Y1 - 2018 U6 - https://doi.org/10.3390/ijms19082271 SN - 1422-0067 SN - 1661-6596 VL - 19 IS - 8 PB - Molecular Diversity Preservation International CY - Basel ER - TY - THES A1 - Kumru, Baris T1 - Utilization of graphitic carbon nitride in dispersed media T1 - Anwendung von graphitischem Kohlenstoffnitrid in dispergierten Medien N2 - Utilization of sunlight for energy harvesting has been foreseen as sustainable replacement for fossil fuels, which would also eliminate side effects arising from fossil fuel consumption such as drastic increase of CO2 in Earth atmosphere. Semiconductor materials can be implemented for energy harvesting, and design of ideal energy harvesting devices relies on effective semiconductor with low recombination rate, ease of processing, stability over long period, non-toxicity and synthesis from abundant sources. Aforementioned criteria have attracted broad interest for graphitic carbon nitride (g-CN) materials, metal-free semiconductor which can be synthesized from low cost and abundant precursors. Furthermore, physical properties such as band gap, surface area and absorption can be tuned. g-CN was investigated as heterogeneous catalyst, with diversified applications from water splitting to CO2 reduction and organic coupling reactions. However, low dispersibility of g-CN in water and organic solvents was an obstacle for future improvements. Tissue engineering aims to mimic natural tissues mechanically and biologically, so that synthetic materials can replace natural ones in future. Hydrogels are crosslinked networks with high water content, therefore are prime candidates for tissue engineering. However, the first requirement is synthesis of hydrogels with mechanical properties that are matching to natural tissues. Among different approaches for reinforcement, nanocomposite reinforcement is highly promising. This thesis aims to investigate aqueous and organic dispersions of g-CN materials. Aqueous g-CN dispersions were utilized for visible light induced hydrogel synthesis, where g-CN acts as reinforcer and photoinitiator. Varieties of methodologies were presented for enhancing g-CN dispersibility, from co-solvent method to prepolymer formation, and it was shown that hydrogels with diversified mechanical properties (from skin-like to cartilage-like) are accessible via g-CN utilization. One pot photografting method was introduced for functionalization of g-CN surface which provides functional groups towards enhanced dispersibility in aqueous and organic media. Grafting vinyl thiazole groups yields stable additive-free organodispersions of g-CN which are electrostatically stabilized with increased photophysical properties. Colloidal stability of organic systems provides transparent g-CN coatings and printing g-CN from commercial inkjet printers. Overall, application of g-CN in dispersed media is highly promising, and variety of materials can be accessible via utilization of g-CN and visible light with simple chemicals and synthetic conditions. g-CN in dispersed media will bridge emerging research areas from tissue engineering to energy harvesting in near future. N2 - Sonnenlicht kann fossile Brennstoffe in der Energieerzeugung ersetzen und ermöglicht neben der Nutzung einer nachhaltigen Ressource dabei auch die deutliche Reduktion der Umweltbelastung in der Energieerzeugung. Die Verfügbarkeit geeigneter Energiegewinnungstechnologien hängt entscheidend von der Verfügbarkeit geeigneter Superkondensatoren (SC) ab. Ideale SC sollten sich in diesem Zusammenhang durch eine geringe Rekombinationsrate, gute Verarbeitbarkeit, Langzeitstabilität, Ungiftigkeit und die Verfügbarkeit aus nachhaltigen Ressourcen auszeichnen. Graphitisches Kohlenstoffnitrid (graphitic carbon nitride – g-CN), ein metall-freier Halbleiter, der aus nachhaltigen und in großer Menge verfügbaren Ausgangsstoffen hergestellt werden kann, ist als Material für dieses Eigenschaftsprofil hervorragend geeignet. Darüber hinaus können die Eigenschaften dieses Materials (innere Oberfläche, Bandlücke, Lichtabsorption) eingestellt werden. Daraus ergibt sich ein großes Forschungsinteresse z.B. im Bereich heterogener Katalyse, wie in der Kohlenstoffdioxidreduktion, elektrolytischen Wasserspaltung und verschiedener organischer Kupplungsreaktionen. Unglücklicherweise ist die schlechte Dispergierbarkeit von g-CN in organischen Lösungsmitteln und Wasser ein wesentlicher Hinderungsgrund für die erfolgreiche Nutzbarmachung dieser hervorragenden Eigenschaften. Das Design von Materialien, die biologisches Gewebe in seinen mechanischen und biologischen Eigenschaften nachahmen und ersetzen können, ist das Ziel der Gewebekonstruktion (Tissue Engineering – TE). Hydrogele, also Netzwerke mit hohem Wassergehalt, gelten als die vielversprechendsten Materialen in diesem Forschungsfeld. Die Herstellung von Hydrogelen, die biologischem Gewebe in seinen mechanischen Eigenschaften ähnelt gilt allerdings als äußerst schwierig und erfordert die Stabilisierung der Netzwerke. Besonders der Einsatz von Nanoverbundstrukturen (nanocomposites) erscheint in diesem Zusammenhang vielversprechend. Die vorliegende Arbeit beschäftigt sich mit der Untersuchung von g-CN in sowohl wässrigen, als auch organischen Dispersionen. Im Zuge dessen werden wässrige Dispersionen für die Synthese von Hydrogelen, bei der g-CN sowohl als Photoinitiator für die durch sichtbares Licht ausgelöste Vernetzung, als auch als Strukturverstärker fungiert. Zur Verbesserung der Dispergierbarkeit des g CN werden vielseitige Ansätze präsentiert, welche von der Verwendung von Co-Lösungsmitteln bis zur Präpolymerbildung reichen. Durch die aufgezeigten Ansätze können Hydrogele mit unterschiedlichen mechanischen Eigenschaften hergestellt werden (hautartig bis knorpelig). Darüber hinaus wird eine Ein-Topf Synthese für die Oberflächenfunktionalisierung vorgestellt, durch die die Dispergierbarkeit von g-CN in organischen und wässrigen Medien verbessert werden kann. Beispielsweise erlaubt die Oberflächenfunktionalisierung mit Vinylthiazol die Herstellung von kolloidal dispergiertem g-CN mit verbesserten photophysikalischen Eigenschaften ohne zusätzliche Additive und eröffnet damit die Möglichkeit transparenter g-CN Beschichtungen und ermöglicht die Druckbarkeit von g-CN aus handelsüblichen Tintenstrahldruckern. Die Anwendung von g-CN in dispergierten Medien ist vielversprechend, da eine große Zahl sehr vielfältiger Materialien durch die Kombination von g-CN mit sichtbarem Licht aus günstigen, nachhaltigen Ressourcen verfügbar ist. Daher ist zu erwarten, dass g-CN in dispergierten Medien verschiedene im Entstehen begriffene Forschungsfelder von TE bis zur Energiegewinnung überspannen wird. KW - polymer chemistry KW - Polymerchemie KW - photochemistry KW - Photochemie KW - colloid chemistry KW - kolloidchemie KW - hydrogels KW - Hydrogelen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427339 ER - TY - THES A1 - Heiden, Sophia L. T1 - Water at α-alumina surfaces T1 - Wasser auf alpha-Aluminiumoxid-Oberflächen BT - energetics, dynamics and kinetics BT - Energetik, Dynamik und Kinetik N2 - The (0001) surface of α-Al₂O₃ is the most stable surface cut under UHV conditions and was studied by many groups both theoretically and experimentally. Reaction barriers computed with GGA functionals are known to be underestimated. Based on an example reaction at the (0001) surface, this work seeks to improve this rate by applying a hybrid functional method and perturbation theory (LMP2) with an atomic orbital basis, rather than a plane wave basis. In addition to activation barriers, we calculate the stability and vibrational frequencies of water on the surface. Adsorption energies were compared to PW calculations and confirmed PBE+D2/PW stability results. Especially the vibrational frequencies with the B3LYP hybrid functional that have been calculated for the (0001) surface are in good agreement with experimental findings. Concerning the barriers and the reaction rate constant, the expectations are fully met. It could be shown that recalculation of the transition state leads to an increased barrier, and a decreased rate constant when hybrid functionals or LMP2 are applied. Furthermore, the molecular beam scattering of water on (0001) surface was studied. In a previous work by Hass the dissociation was studied by AIMD of molecularly adsorbed water, referring to an equilibrium situation. The experimental method to obtaining this is pinhole dosing. In contrast to this earlier work, the dissociation process of heavy water that is brought onto the surface from a molecular beam source was modeled in this work by periodic ab initio molecular dynamics simulations. This experimental method results in a non-equilibrium situation. The calculations with different surface and beam models allow us to understand the results of the non-equilibrium situation better. In contrast to a more equilibrium situation with pinhole dosing, this gives an increase in the dissociation probability, which could be explained and also understood mechanistically by those calculations. In this work good progress was made in understanding the (1120) surface of α-Al₂O₃ in contact with water in the low-coverage regime. This surface cut is the third most stable one under UHV conditions and has not been studied to a great extent yet. After optimization of the clean, defect free surface, the stability of different adsorbed species could be classified. One molecular minimum and several dissociated species could be detected. Starting from these, reaction rates for various surface reactions were evaluated. A dissociation reaction was shown to be very fast because the molecular minimum is relatively unstable, whereas diffusion reactions cover a wider range from fast to slow. In general, the (112‾0) surface appears to be much more reactive against water than the (0001) surface. In addition to reactivity, harmonic vibrational frequencies were determined for comparison with the findings of the experimental “Interfacial Molecular Spectroscopy” group from Fritz-Haber institute in Berlin. Especially the vibrational frequencies of OD species could be assigned to vibrations from experimental SFG spectra with very good agreement. Also, lattice vibrations were studied in close collaboration with the experimental partners. They perform SFG spectra at very low frequencies to get deep into the lattice vibration region. Correspondingly, a bigger slab model with greater expansion perpendicular to the surface was applied, considering more layers in the bulk. Also with the lattice vibrations we could obtain reasonably good agreement in terms of energy differences between the peaks. N2 - Das wissenschaftliche Interesse an der Untersuchung von Oberflächen hat in den letzten Jahren stark zugenommen. Oberflächen spielen unter anderem in Katalyse, Nanotechnologie und Korrosionsforschung eine wichtige Rolle. Es wurden nicht nur Fortschritte im experimentellen Bereich, sondern auch in der theoretischen, computergestützten Analyse dieser Systeme erzielt. Durch leistungsstärkere Computer und ausgefeiltere Software mit immer besseren Methoden können heutzutage wesentlich größere, komplexere Systeme mit höherer Genauigkeit untersucht werden, als noch vor zehn Jahren. In dieser Arbeit wurden derartige Rechnungen angewandt, um Prozesse der α-Aluminiumoxid-Oberfläche besser zu verstehen. Es wurde in drei Teilprojekten wissenschaftlichen Fragestellungen zu Aufbau, Stabilität, Wasseradsorption, Reaktivität und Schwingungseigenschaften nachgegangen, letztere auch im Vergleich zu experimentellen Befunden. Im ersten Teilprojekt wurde auf ein bekanntes Problem der genutzten Methodik eingegangen. Wie aus der Literatur bekannt ist, werden bei dem Dichtefunktional PBE, das in dieser Arbeit hauptsächlich verwendet wurde, die Reaktionsbarrieren unterschätzt, und somit Raten überschätzt. Mit Hilfe zweier unterschiedlicher Methoden konnte dieses Problem deutlich verbessert werden, sodass die Barrieren erhöht und die Raten verringert wurden, was mehr dem Bild der Realität entspricht. Diese Methoden sind zum einen die sogenannten Hybridfunktionale und zum anderen lokale Møller-Plesset Störungstheorie. Außerdem wurden Adsorptionsenergien und Vibrationen berechnet und mit vorherigen Rechnungen, sowie experimentellen Daten verglichen. In einem zweiten Teilprojekt wurde die Streuung von Wasser an der Oberfläche untersucht. In einem Molekularstrahlexperiment konnte kürzlich nachgewiesen werden, dass sich die Dissoziationswahrscheinlichkeit im Vergleich zur Pinhole-Dosierung erhöht (beides sind Methoden um Wasser auf die Oberfläche aufzubringen). In dieser Arbeit konnte dies durch Simulationen nachgewiesen und mechanistisch aufgeklärt werden. Ein weiteres Teilprojekt befasste sich mit der (112‾0)-Oberfläche, zu der es bislang wenige Untersuchungen gibt. Hier wurde zunächst die Oberfläche ohne Wasser untersucht, um die Beschaffenheit zu erkunden. Anschließend wurde das Verhalten eines Wassermoleküls auf der Oberfläche untersucht. Es kann sowohl molekular adsorbieren, als auch in seine Bestandteile OH und H dissoziiert vorliegen, wobei die dissoziierten Strukturen wesentlich stabiler sind. Die Reaktionsraten für Dissoziation und Diffusion wurden untersucht. Erstere sind sehr schnell (Größenordnung 10¹² pro Sekunde) und letztere können einen weiten Bereich abdecken (10⁻¹³-10⁶s⁻¹). Im Vergleich mit oberflächenspezifischen Schwingungsspektroskopie-Experimenten konnte gute Übereinstimmung gefunden werden. So waren wir in der Lage, die jeweiligen OD Gruppen jeder Schwingung den experimentellen Daten zuzuweisen, wobei D hier Deuterium, also schwerer Wasserstoff ist. KW - surface science KW - alumina KW - water at alumina KW - theoretical chemistry KW - theoretische Chemie KW - Aluminiumoberfläche KW - Wasser auf Aluminiumoxid KW - Oberflächenchemie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426366 ER - TY - THES A1 - Cheng, Xiao T1 - Controlled solvent vapor annealing of block copolymer films T1 - Kontrolliertes Lösungsmitteldampfglühen von Blockcopolymerfilmen N2 - This project was focused on exploring the phase behavior of poly(styrene)187000-block-poly(2-vinylpyridine)203000 (SV390) with high molecular weight (390 kg/mol) in thin films, in which the self-assembly of block copolymers (BCPs) was realized via thermo-solvent annealing. The advanced processing technique of solvent vapor treatment provides controlled and stable conditions. In Chapter 3, the factors to influence the annealing process and the swelling behavior of homopolymers are presented and discussed. The swelling behavior of BCP in films is controlled by the temperature of the vapor and of the substrate, on one hand, and variation of the saturation of the solvent vapor atmosphere (different solvents), on the other hand. Additional factors like the geometry and material of the chamber, the type of flow inside the chamber etc. also influence the reproducibility and stability of the processing. The slightly selective solvent vapor of chloroform gives 10% more swelling of P2VP than PS in films with thickness of ~40 nm. The tunable morphology in ultrathin films of high molecular weight BCP (SV390) was investigated in Chapter 4. First, the swelling behavior can be precisely tuned by temperature and/or vapor flow separately, which provided information for exploring the multiple-parameter-influenced segmental chain mobility of polymer films. The equilibrium state of SV390 in thin films influenced by temperature was realized at various temperatures with the same degree of swelling. Various methods including characterization with SFM, metallization and RIE were used to identify the morphology of films as porous half-layer with PS dots and P2VP matrix. The kinetic investigations demonstrate that on substrates with either weak or strong interaction the original morphology of the BCP with high molecular weight is changed very fast within 5 min, and the further annealing serves for annihilation of defects. The morphological development of symmetric BCP in films with thickness increasing from half-layer to one-layer influenced by confinement factors of gradient film thicknesses and various surface properties of substrates was studied in Chapter 5. SV390 and SV99 films show bulk lamella-forming morphology after slightly selective solvent vapor (chloroform) treatment. SV99 films show cylinder-forming morphology under strongly selective solvent vapor (toluene) treatment since the asymmetric structure (caused by toluene uptake in PS blocks only) of SV99 block copolymer during annealing. Both kinds of morphology (lamella and cylinder) are influenced by the film thickness. The annealed morphology of SV390 and SV99 influenced by the combination of confined film and substrate property is similar to the morphology on flat silicon wafers. In this chapter the gradients in the film thickness and surface properties of the substrates with regard to their influence on the morphological development in thin BCP films are presented. Directed self-assembly (graphoepitaxy) of this SV390 was also investigated to compare with systematically reported SV99. In Chapter 6 an approach to induced oriented microphase separation in thick block copolymer films via treatment with the oriented vapor flow using mini-extruder is envisaged to be an alternative to existing methodologies, e.g. via non-solvent-induced phase separation. The preliminary tests performed in this study confirm potential perspective of this method, which alters the structure through the bulk of the film (as revealed by SAXS measurements), but more detailed studies have to be conducted in order to optimize the preparation. N2 - Im Rahmen dieser Arbeit wurde das Phasenverhalten von Poly(styrol)_187000 -block-poly(2-Vinylpyridin)_203000 (SV^390 ) hohen Molekulargewichts (390 kg/mol) in dünnen Filmen untersucht, in denen die Selbstassemblierung der Block-Copolymere durch Lösungsmitteltempern erreicht wurde. Das hochentwickelte Verfahren der Behandlung mit Lösungsmitteldampf bietet kontrollierte und stabile Bedingungen. In *Kapitel 3* werden die Faktoren diskutiert, die den Prozess des Temperns und das Schwellverhalten der dünnen Block-Copolymer Filme beeinflussen. Das Schwellverhalten von Block-Copolymeren in Filmen wird einerseits durch die Temperaturen des Lösungsmitteldampfes und des Substrates sowie andererseits dem Sättigungs-Dampfdruck kontrolliert. Zusätzlich beeinflussen auch Faktoren wie die Geometrie und das Material der Kammer sowie die Art der Strömung in der Kammer die Reproduzierbarkeit und Stabilität der Messungen. Der geringfügig selektive Lösungsmitteldampf von Chloroform führt zu 10% stärkerem Schwellen des P2VP-Blocks im Vergleich zu PS in Filmen mit einer Dicke von ca. 40 nm. Die variable Morphologie ultradünner Filme eines Block-Copolymers hohen Molekulargewichts (SV^390 ) wurde in *Kapitel 4* untersucht. Das Schwellverhalten kann durch die Temperatur und den Dampffluss unabhängig voneinander präzise beeinflusst werden. Die Umgebungstemperatur stellt einen limitierenden Faktor für den Bereich der Annealing-Temperatur aufgrund der möglichen Kondensation des Lösungsmitteldampfes dar. Mehrere Methoden, wie zum Beispiel die Charakterisierung mit Rasterkraftmikroskopie, Metallisierung und reaktives Ionenätzen, wurden verwendet, um die Morphologie der Filme als perforierte Lamellen mit PS-Kugeln und P2VP-Matrix zu bestimmen. Eine Analyse der Kinetik der Strukturbildung zeigt, dass sich die ursprüngliche Morphologie von Block-Copolymeren hohen Molekulargewichts sowohl auf Substraten mit schwacher als auch starker Wechselwirkung innerhalb von 5 min ändert und das weitere Tempern zum Ausheilen von Defekten führt. Die morphologische Veränderung von symmetrischen Block-Copolymeren bei Filmdicken zwischen einer halben Domänendicke und einer ganzen Domänendicke wurde in *Kapitel 5* in Abhängigkeit von Gradienten der Filmdicke und verschiedenen Oberflächeneigenschaften der Substrate untersucht. SV^390 und SV^99 Filme zeigen eine lamellare Bulk-Morphologie nach Behandlung mit geringfügig selektivem Lösungsmitteldampf (Chloroform). SV^99 Filme bilden eine zylindrische Morphologie unter Behandlung mit stark selektivem Lösungsmitteldampf (Toluol) aus, weil das SV^99 Block-Copolymer während des Temperns eine asymmetrische Struktur aufweist (Toluol-Aufnahme ausschließlich im Polystyrol-Block). Beide Morphologien (Lamellen und Zylinder) werden durch die Filmdicke beeinflusst. Die Morphologie von SV^390 und SV^99 nach Tempern ist abhängig von der Filmdicke und den Substrat-Eigenschaften und ähnlich der Morphologie auf flachen Silicium-Wafern. In *Kapitel 6* wird ein Ansatz zur induzierten orientierten Mikrophasenseparation in dicken Block-Copolymer Filmen durch Behandlung mit orientiertem Dampffluss unter Verwendung eines Miniextruders vorgestellt, der als Alternative zu existierenden Verfahren wie Nichtlösungsmittel-induzierter Phasenseparation dienen könnte. Die ersten im Rahmen dieser Arbeit durchgeführten Untersuchungen zeigen das Potential der Methode auf, welche die Struktur im gesamten Volumen des Films durchgehend beeinflusst (durch SAXS-Messungen gezeigt). Jedoch sind detailliertere Studien notwendig, um die Prozedur zu optimieren. KW - block copolymer KW - thin films KW - solvo-thermal annealing KW - Block-copolymer KW - dünne Filme KW - Lösungsmittel-thermisches Tempern Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-424179 ER - TY - THES A1 - Riemer, Nastja T1 - Diazoniumsalze für die Synthese von Pflanzenschutzmitteln BT - Entwicklung neuer PD-katalysierter Kupplungsreaktionen mit Aryldiazoniumtetrafluoroboraten und Synthese von Herbiziden, Fungiziden und anderen biologisch aktiven Verbindungen Y1 - 2018 ER - TY - THES A1 - Homeyer, Marc Sören T1 - Photometrische Bestimmungen mittels eines modifizierten Schülerphotometers und naturwissenschaftliches Arbeiten im Seminarkurs Y1 - 2018 CY - 119, A 203 ER - TY - THES A1 - Grunert, Bianca T1 - Entwicklung von Markierungsreagenzien für die bildgebende Diagnostik T1 - Development of cell labeling probes for diagnostic imaging N2 - Die intrazelluläre Markierung mit geeigneten Reagenzien ermöglicht ihre bildgebende Darstellung in lebenden Organismen. Dieses Verfahren (auch „Zell-Tracking“ genannt) wird in der Grundlagenforschung zur Entwicklung zellulärer Therapien, für die Erforschung pathologischer Prozesse, wie der Metastasierung, sowie für Therapiekontrollen eingesetzt. Besondere Bedeutung haben in den letzten Jahren zelluläre Therapien mit Stammzellen erlangt, da sie großes Potential bei der Regeneration von Geweben bei Krankheiten wie Morbus Parkinson oder Typ-1-Diabetes versprechen. Für die Entwicklung einer zellulären Therapie sind Informationen über den Verbleib der applizierten Zellen in vivo (Homing-Potential), über ihre Zellphysiologie sowie über die Entstehung möglicher Entzündungen notwendig. Das Ziel der vorliegenden Arbeit war daher die Synthese von Markierungsreagenzien, die nicht nur eine effiziente Zellmarkierung ermöglichen, sondern einen synergistischen Effekt hinsichtlich des modalitätsübergreifenden Einsatzes in den bildgebenden Verfahren MRT und Laser-Ablation(LA)-ICP-MS erlauben. Die MRT-Bildgebung ermöglicht die nicht invasive Nachverfolgung markierter Zellen in vivo und die LA-ICP-MS die anschließende ex vivo Analytik zur Darstellung der Elementverteilung (Bioimaging) in einer Biopsieprobe oder in einem Gewebeschnitt. Für diese Zwecke wurden zwei verschiedene Markierungsreagenzien mit dem kontrastgebenden Element Gadolinium synthetisiert. Gadolinium eignet sich aufgrund seines hohen magnetischen Moments hervorragend für die MRT-Bildgebung und da es in Biomolekülen nicht natürlich vorkommt, konnten die Reagenzien gleichermaßen für die Zellmarkierung und das Bioimaging mit der LA-ICP-MS untersucht werden. Für die Synthese eines makromolekularen Reagenzes wurde das kommerziell verfügbare Dendrimer G5-PAMAM über bifunktionelle Linker mit dem Chelator DOTA funktionalisiert, um anschließend Gadolinium zu komplexieren. Ein zweites, nanopartikuläres Reagenz wurde über eine Solvothermal-Synthese erhalten, bei der Ln:GdVO4-Nanokristalle mit einer funktionellen Polyacrylsäure(PAA)-Hülle dargestellt wurden. Die Dotierung der Ln:GdVO4-PAA Nanokristalle mit verschiedenen Lanthanoiden (Ln=Eu, Tb) zeigte ihre prinzipielle Multiplexfähigkeit in der LA-ICP-MS. Beide Markierungsreagenzien zeichneten sich durch gute Bioverträglichkeiten und r1-Relaxivitäten aus, was zudem ihr Potential für Anwendungen als präklinische „blood-pool“ MRT-Kontrastmittel belegte. Die Untersuchung der Zellmarkierung erfolgte anhand einer Tumorzelllinie und einer Stammzelllinie, wobei beide Zellarten erfolgreich intrazellulär mit beiden Reagenzien markiert wurden. Nach der Zellmarkierung veranschaulichte die in vitro MRT-Bildgebung von Zell-Phantomen eine deutlichere Kontrastverstärkung der Zellen nach der Markierung mit den Nanokristallen im Vergleich zum kommerziellen Kontrastmittel Magnevist®. Die hohe Effizienz der Zellmarkierung mit den Nanokristallen und die damit verbundenen hohen Signalintensitäten in einer einzelnen Zelle erlaubten beim Bioimaging mit der LA-ICP-MS, Messungen bis zu einer Auflösung von 4 µm Laser Spot Size. Nach der Zellmarkierung mit den DOTA(Gd3+)-funktionalisierten G5-PAMAM Dendrimeren waren hingegen Aufnahmen mit der LA-ICP-MS nur bis zu einer Auflösung von 12 µm Laser Spot Size möglich. Insgesamt waren die Ln:GdVO4-PAA Nanokristalle mit größerer Ausbeute und kostengünstiger herstellbar als die DOTA(Gd3+)-funktionalisierten G5-PAMAM Dendrimere und zeigten zudem eine effizientere Zellmarkierung. Die Ln:GdVO4-PAA Nanokristalle erscheinen somit für das Zell-Tracking als besonders vielversprechend. Darauf aufbauend wurden die Nanokristalle zur Etablierung der Antikörper-Konjugation ausgewählt, was sie für die molekulare in vivo Bildgebung sowie für die Immuno-Bildgebung von Gewebeschnitten oder Biopsie-Proben mit der LA-ICP-MS anwendbar macht. N2 - Labeling of intracellular structures using appropriate reagents allows diagnostic imaging of such structures in living organisms. This procedure, also known as ‘cell-tracking’, can be applied in various fields of basic research, e.g. for development of cellular therapies, understanding of pathological processes such as metastasis as well as monitoring of therapeutic strategies. In recent years, cellular therapies involving stem cells have gained increasing importance for they promise great potential in the regeneration of damaged tissue associated with various diseases such as Parkinson’s disease or Type 1 diabetes. However, to enable the development of a cell-based therapy, information regarding the in vivo ability of administered cells to migrate to the organ of their origin (homing potential), the cell physiology and the risk of potential inflammation is essential. The objective of the present thesis was the synthesis of labeling reagents that not only enable efficient cell labeling, but also allow tracking of the labeled cells via magnetic resonance imaging (MRI) and laser ablation inductively coupled plasma mass spectroscopy (LA-ICP-MS). MRI offers the ability to non-invasively track the labeled cells in vivo, whereas LA-ICP-MS allows subsequent ex vivo analysis of biopsy samples. To this end, two different types of labeling reagents were synthesized containing the contrast-enhancing element gadolinium (Gd). Gd is perfectly suited for MRI due to its high magnetic moment and, since it does not occur naturally in biomolecules, the Gd-containing labelling reagents could additionally be investigated with regard to their cell labeling and bioimaging efficacy using LA-ICP-MS. Synthesis of a macromolecular labeling reagent was performed by functionalization of the commercially available dendrimer G5-PAMAM with the chelator DOTA, which subsequently allows complexation of Gd3+-ions. A second nanoparticulate labeling reagent was synthesized via a solvothermal route which yielded in Ln:GdVO4 nanocrystals having a functional shell of polyacrylic acid. Doping of these nanocrystals with different lanthanides (Ln=Eu, Tb) demonstrated their fundamental capability for multiple implementation with LA-ICP-MS. All synthesized labeling reagents showed suitable biocompatibility and r1-relativities, indicating their potential for application as in vivo preclinical MR imaging agents. The cell labeling efficacy of the synthesized reagents was investigated in both cancer and stem cell lines, whereby both cell types showed efficient intracellular uptake. After cell labelling, in vitro MRI of cell phantoms indicated that the nanocrystalline-labelled cells portrayed a significantly higher contrast enhancement, in comparison to labelling with the commercially available MRI agent, Magnevist. Bioimaging of the nanocrystalline-labelled cells with LA-ICP-MS enabled resolutions of up to 4 µm laser spot size to be achieved since the high labelling efficacy allowed high signal intensities to be observed. On the other hand, measurements of dendrimer-labelled cells could be performed up to resolutions of 12 µm laser spot size. Evaluation of the different labelling reagents showed that the one based on nanocrystals could be synthesized more cost effectively, with greater yields and resulted in a higher cell labelling efficacy, demonstrating a superior aptitude for cell-tracking applications. Consequently, the nanocrystalline labeling reagent was selected for conjugation with antibodies, which in turn enables in vitro ICP-MS-based immunohistochemistry detection as well as in vivo molecular imaging. KW - Zellmarkierung KW - Magnetresonanztomographie KW - Laserablation-ICP-MS KW - cell labeling probe KW - magnetic resonance imaging Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-422830 ER - TY - THES A1 - Vogel, Stefanie T1 - Sequence dependency of photon and electron induced DNA strand breaks T1 - Sequenzabhängigkeit von photonen-und elektroneninduzierten DNA Strangbrüchen N2 - Deoxyribonucleic acid (DNA) is the carrier of human genetic information and is exposed to environmental influences such as the ultraviolet (UV) fraction of sunlight every day. The photostability of the DNA against UV light is astonishing. Even if the DNA bases have a strong absorption maximum at around 260 nm/4.77 eV, their quantum yield of photoproducts remains very low 1. If the photon energies exceed the ionization energy (IE) of the nucleobases ( ̴ 8-9 eV) 2, the DNA can be severely damaged. Photoexcitation and -ionization reactions occur, which can induce strand breaks in the DNA. The efficiency of the excitation and ionization induced strand breaks in the target DNA sequences are represented by cross sections. If Si as a substrate material is used in the VUV irradiation experiments, secondary electrons with an energy below 3.6 eV are generated from the substrate. This low energy electrons (LEE) are known to induce dissociative electron attachment (DEA) in DNA and with it DNA strand breakage very efficiently. LEEs play an important role in cancer radiation therapy, since they are generated secondarily along the radiation track of ionizing radiation. In the framework of this thesis, different single stranded DNA sequences were irradiated with 8.44 eV vacuum UV (VUV) light and cross sections for single strand breaks (SSB) were determined. Several sequences were also exposed to secondary LEEs, which additionally contributed to the SSBs. First, the cross sections for SSBs depending on the type of nucleobases were determined. Both types of DNA sequences, mono-nucleobase and mixed sequences showed very similar results upon VUV radiation. The additional influence of secondarily generated LEEs resulted in contrast in a clear trend for the SSB cross sections. In this, the polythymine sequence had the highest cross section for SSBs, which can be explained by strong anionic resonances in this energy range. Furthermore, SSB cross sections were determined as a function of sequence length. This resulted in an increase in the strand breaks to the same extent as the increase in the geometrical cross section. The longest DNA sequence (20 nucleotides) investigated in this series, however, showed smaller cross section values for SSBs, which can be explained by conformational changes in the DNA. Moreover, several DNA sequences that included the radiosensitizers 5-Bromouracil (5BrU) and 8-Bromoadenine (8BrA) were investigated and the corresponding SSB cross sections were determined. It was shown that 5BrU reacts very strongly to VUV radiation leading to high strand break yields, which showed in turn a strong sequence-dependency. 8BrA, on the other hand, showed no sensitization to the applied VUV radiation, since almost no increase in strand breakage yield was observed in comparison to non-modified DNA sequences. In order to be able to identify the mechanisms of radiation damage by photons, the IEs of certain DNA sequences were further explored using photoionization tandem mass spectrometry. By varying the DNA sequence, both the IEs depending on the type of nucleobase as well as on the DNA strand length could be identified and correlated to the SSB cross sections. The influence of the IE on the photoinduced reaction in the brominated DNA sequences could be excluded. N2 - Desoxyribonukleinsäure (DNA) ist als Träger der menschlichen Erbinformation täglich vielen Einflüssen ausgesetzt. Diese Einflüsse können Teil unserer Umwelt sein, wie der ultraviolette (UV) Anteil des Sonnenlichts. Die Photostabilität der DNA gegen UV-Licht ist erstaunlich, denn trotz eines starkes Absorptionsmaximum der DNA-Basen bei etwa 260 nm/4,77 eV, bleibt ihre Quantenausbeute an Photoprodukten sehr gering 1. Überschreiten die Photonenenergien die Ionisationsenergie (IE) der Nukleinbasen ( ̴ 8-9 eV) 2, kann die DNA schwer geschädigt werden. Es treten Anregungs- und Ionisierungsreaktionen auf, die zu Strangbrüchen in der DNA führen. Die Effizienz der induzierten Strangbrüche in den untersuchten DNA-Sequenzen wird durch Wirkungsquerschnitte dargestellt. Wird in den Bestrahlungsexperimenten Silizium als Substratmaterial verwendet, werden aus dem Substrat zusätzliche Sekundärelektronen mit einer Energie unter 3,6 eV erzeugt, die weiteren Schaden an der DNA verursachen. Diese niederenergetischen Elektronen (LEE) sind dafür bekannt, dissoziative Elektronenanlagerung (DEA) und damit Strangbrüche in der DNA zu erzeugen. LEEs entstehen sekundär entlang des Strahlungsweges von ionisierender Strahlung im biologischen Gewebe, wenn in der Behandlung der Krankheit Krebs Strahlentherapie eingesetzt wird. Im Rahmen dieser Arbeit wurden verschiedene Einzelstrang-DNA-Sequenzen mit 8.44 eV Vakuum-UV (VUV) Licht bestrahlt und Wirkungsquerschnitte für Einzel-strangbrüche (SSB) bestimmt. Ein Teil der Sequenzen wurde außerdem sekundär erzeugten LEEs ausgesetzt, die einen zusätzlichen Beitrag zu den SSBs liefern. Als erstes wurde der Wirkungsquerschnitt für SSBs in Abhängigkeit der Nukleinbasen bestimmt. Hierbei weisen sowohl die DNA Sequenzen, die nur ein Sorte an Nukleinbasen besitzen als auch die gemischte Sequenzen sehr ähnliche Werte auf. Durch den zusätzlichen Einfluss der LEEs hat sich wiederum für die DNA Sequenzen mit nur einer Sorte an Nukleinbasen ein stark ausgeprägter Trend gezeigt. Die Polythymin-Sequenz weist den höchsten Wirkungsquerschnitt für SSBs auf, was durch ausgeprägte anionische Resonanzen in diesem Energiebereich begründet werden kann. Des Weiteren wurden Wirkungsquerschnitte für SSBs in Abhängigkeit Sequenzlänge ermittelt. Dabei ergab sich eine Erhöhung der SSBs im gleichen Maße wie die Vergrößerung des geometrischen Wirkungsquerschnitts. Die längste DNA Sequenz (20 Nukleotide), die in dieser Reihe untersucht wurde, zeigte hingegen kleinere Werte für den SSB Wirkungsquerschnitt, was durch Konformationsänderungen in der DNA erklärt werden kann. Einige der untersuchten DNA Sequenzen wurden zusätzlich mit den Radiosensibilisatoren 5-Bromouracil (5BrU) und 8-Bromoadenine (8BrA) modifiziert und entsprechende SSB Wirkungsquerschnitte bestimmt. Hierbei hat sich gezeigt, dass 5BrU mittels einer hohen Strangbruchausbeute sehr stark auf VUV Strahlung reagiert, wobei das Ausmaß der Reaktion stark sequenzabhängig ist. 8BrA hingegen, weist keine Sensibilisierung gegenüber der verwendeten VUV Strahlung auf, da keine Erhöhung der Strangbruchausbeute gegenüber unmodifizierten DNA Sequenzen ersichtlich ist. Um die Mechanismen der Strahlenschädigung durch Photonen besser einschätzen zu können, wurden zusätzlich die IEs bestimmter DNA Sequenzen mit Hilfe der Photoionisations-Tandem-Massenspektrometrie untersucht. Durch Variation der DNA-Sequenzen konnte sowohl ein Trend der IEs in Abhängigkeit der Nukleinbasen und der DNA-Stranglänge identifiziert und als auch eine Abhängigkeit der Reaktivität von 5BrU von seinem IE in der entsprechenden DNA Sequenz ausgeschlossen werden. Die IE Trends und die Wirkungsquerschnitte für SSBs wurden abschließend in Korrelation gebracht. KW - DNA KW - photo ionization KW - dissociative electron attachment KW - DNA origami KW - radiosensitizer KW - ionization energy KW - tandem mass spectrometry KW - DNS KW - Photoionisation KW - Dissoziative Elektronenanlagerung KW - DNA Origami KW - Radiosensibilisator KW - Ionisierungsenergie KW - Tandemmassenspektrometrie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419669 ER - TY - THES A1 - Choi, Youngeun T1 - DNA origami structures as versatile platforms for nanophotonics T1 - DNA Origami Struktruen als Vielseitige Plattform für Nanophotonik N2 - Nanophotonics is the field of science and engineering aimed at studying the light-matter interactions on the nanoscale. One of the key aspects in studying such optics at the nanoscale is the ability to assemble the material components in a spatially controlled manner. In this work, DNA origami nanostructures were used to self-assemble dye molecules and DNA coated plasmonic nanoparticles. Optical properties of dye nanoarrays, where the dyes were arranged at distances where they can interact by Förster resonance energy transfer (FRET), were systematically studied according to the size and arrangement of the dyes using fluorescein (FAM) as the donor and cyanine 3 (Cy 3) as the acceptor. The optimized design, based on steady-state and time-resolved fluorometry, was utilized in developing a ratiometric pH sensor with pH-inert coumarin 343 (C343) as the donor and pH-sensitive FAM as the acceptor. This design was further applied in developing a ratiometric toxin sensor, where the donor C343 is unresponsive and FAM is responsive to thioacetamide (TAA) which is a well-known hepatotoxin. The results indicate that the sensitivity of the ratiometric sensor can be improved by simply arranging the dyes into a well-defined array. The ability to assemble multiple fluorophores without dye-dye aggregation also provides a strategy to amplify the signal measured from a fluorescent reporter, and was utilized here to develop a reporter for sensing oligonucleotides. By incorporating target capturing sequences and multiple fluorophores (ATTO 647N dye molecules), a reporter for microbead-based assay for non-amplified target oligonucleotide sensing was developed. Analysis of the assay using VideoScan, a fluorescence microscope-based technology capable of conducting multiplex analysis, showed the DNA origami nanostructure based reporter to have a lower limit of detection than a single stranded DNA reporter. Lastly, plasmonic nanostructures were assembled on DNA origami nanostructures as substrates to study interesting optical behaviors of molecules in the near-field. Specifically, DNA coated gold nanoparticles, silver nanoparticles, and gold nanorods, were placed on the DNA origami nanostructure aiming to study surface-enhanced fluorescence (SEF) and surface-enhanced Raman scattering (SERS) of molecules placed in the hotspot of coupled plasmonic structures. N2 - Nanophotonik bezeichnet die Untersuchung von Licht in Wechselwirkung mit Materie im Nanometermaßstab. Die exakte Kontrolle über den Aufbau und die räumliche Anordnung der beteiligten Komponenten ist ein entscheidender Faktor für die Erforschung der Optik nanoskalierter Systeme. Eine mögliche Lösung bietet die selbstorganisatorische Eigenschaft von DNA-Origami-Nanostrukturen, die im Rahmen dieser Dissertation, insbesondere zur Kopplung verschiedener Farbstoffe bzw. plasmonisch aktiver Nanopartikel, verwendet wurden. Im ersten Teil dieser Dissertation wurden unterschiedliche Förster-Resonanzenergietransfer- (FRET) Farbstoff-Matrizen, bestehend aus Fluorescein (FAM) als FRET-Donor und Cyanine 3 (Cy 3) als FRET-Akzeptor, hergestellt und nachfolgend hinsichtlich des Einflusses ihrer Gesamtgröße und ihrer Anordnung via statischer und zeitaufgelöster Fluoreszenzspektroskopie untersucht. Daraufhin erfolgte die Weiterentwicklung der ermittelten optimalen Anordnung der Farbstoffe in einen ratiometrischen pH-Sensor, bestehend aus dem pH stabilen Coumarin 343 (C343) als FRET-Donor und dem pH sensitiven FAM als FRET-Akzeptor. Die erhaltenen Ergebnisse zeigten, dass sich die Sensitivität ratiometrischer Sensoren, insbesondere durch die wohldefinierte Anordnung der beteiligten Farbstoffe in der Matrize, deutlich steigern lassen. Selbige Anordnung konnte auch erfolgreich zur Entwicklung eines Giftstoffsensors, zum Nachweis des Hepatoxins Thioacetamid (TAA), verwendet werden. Die Möglichkeit der Anordnung mehrerer Farbstoffe, unter Vermeidung ungewollter Farbstoff-Aggregation, ermöglicht außerdem die Verstärkung der Signale sogenannter Fluoreszenzreporter. Dies führte, im Rahmen dieser Arbeit, zur erfolgreichen Entwicklung eines auf Mikroperlen basierenden Oligonukleotid-Sensors, welcher ohne die Notwendigkeit einer vorherigen Zielverstärkung (z.B. durch Polymerase-Kettenreaktion) auskommt. Die anschließende Analyse mittels VideoScan, einer Multiplex-Analyse-Technik basierend auf der Fluoreszenzmikroskopie, ergab deutlich niedrigere Nachweisgrenzen für auf DNA-Origami basierende Reporter im Vergleich zu DNA-Einzelstrang basierenden Reportern. Abschließend erfolgte die Verwendung der DNA-Origamis als Substrat für die präzise räumliche Anordnung verschiedener plasmonisch aktiver Nanopartikel zur Untersuchung des optischen Verhaltens von Zielmolekülen im plasmonischen Nahfeld. Die Untersuchung der oberflächenverstärkten Fluoreszenz (SEF) und oberflächenverstärkten Raman-Streuung (SERS) von Molekülen im plasmonischer Hotspots erfolgte insbesondere mit Fokus auf den Einfluss der unterschiedlichen Anordnung von Gold-Nanostäbchen, Gold-Nanopartikel, und Silber-Nanopartikel. KW - DNA origami KW - Förster resonance energy transfer KW - plasmonics KW - DNA Origami KW - Förster-Resonanzenergietransfer KW - Plasmonik Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421483 ER - TY - THES A1 - Liebig, Ferenc T1 - Synthesis and characterization of superstructures based on gold nanotriangles Y1 - 2018 ER - TY - THES A1 - Schulze, Sven T1 - Entwicklung und Charakterisierung optischer Biosensorplattformen basierend auf photonischen Kristallen und Faser-Bragg-Gitter T1 - Development and characterization of optical biosensor platforms based on photonic crystalls and fiber Bragg gratings N2 - In dieser Arbeit steht die Entwicklung einer Sensorplattform für biochemische Anwendungen, welche auf einem optischen Detektionsprinzips beruht, im Vordergrund. Während der Entwicklung wurden zwei komplementäre Konzeptideen behandelt, zum einen ein Sensor, der auf photonischen Kristallen und Wellenleiterstrukturen basiert und zum anderen einen faserbasierten Sensor, der chemisch modifizierte Faser-Bragg-Gitter enthält. Das optische Detektionsprinzip in beiden Sensorideen ist die resultierende Brechungsindexänderung als messbare physikochemische Kenngröße. Das aus der Natur bekannte Phänomen der photonischen Kristalle, das u. a. bei Opalen und bei Schmetterlingen zu finden ist, wurde bereits 1887 von Lord Rayleigh beschrieben. Er beschrieb die optischen Eigenschaften von periodischen mehrschichtigen Filmen, welche als vereinfachtes Modell eines eindimensionalen photonischen Kristalls verstanden werden können. Die Periodizität der Brechungsindexänderung resultiert in einem optischen Filter für Frequenzen in einem bestimmten spektralen Bereich, weshalb dann dort keine Lichtausbreitung mehr möglich ist. Wird dieses System aber durch eine Defektstelle in der Brechungsindexperiodizität gestört, sodass daraus zwei perfekt periodische Systeme entstehen, ist die Lichtausbreitung für eine bestimmte Frequenz dennoch möglich. In der Folge resultiert daraus ein schmalbandiges Signal im Transmissionsspektrum. Die erlaubte Frequenz ist dabei u. a. abhängig vom Brechungsindexunterschied des periodischen Systems, d.h. Veränderung des Brechungsindexes einer Schicht führt zu einer spektralen Verschiebung der erlaubten Frequenz, dadurch kann dieses Sensorkonzept für biochemische Sensorik ausgenutzt werden [1]. Diese Entwicklung des auf photonischen Kristallen basierenden Sensors war eine Kooperation mit dem Industriepartner „Nanoplus GmbH“. In der Doktorarbeit wurden Simulationen und praktischen Arbeiten zur Designentwicklung des Sensors und die Arbeiten an einem ersten Modellaufbau für die biochemischen Anwendungen durchgeführt. Für den faserbasierten Sensor wurden Faser-Bragg-Gitter in den Faserkern hineingeschrieben. Hill et al. entdeckten 1978, dass solche Gitterstrukturen genau wie photonische Kristalle als optische Filter fungieren [2]. Die Gitter bestehen dabei aus Änderungen des Brechungsindexes im Faserkern. Im Laufe der nächsten vierzig Jahren wurden verschiedene Einschreibetechniken und Gitterstrukturen entwickelt, weshalb die Eigenschaften der jeweiligen Gitterstrukturen variieren. Eine solche Gitterstruktur sind u. a. die Faser-Bragg-Gitter, deren Gitterperiode, d. h. die Abstände der Brechungsindexmodifikationen, sich im Nanometer- bis Mikrometerbereich befinden. Aufgrund der kleinen Gitterperiode wird eine rückwärtsführende Welle im Kern für eine bestimmte Frequenz bzw. Wellenlänge, der Bragg-Wellenlänge, erzeugt. Im Endeffekt resultiert daraus ein schmalbandiges Signal sowohl im Transmissionsspektrum, als auch im Reflexionsspektrum. Die Resonanzwellenlänge ist dabei proportional zu der Gitterperiode und dem effektiven Brechungsindex, welcher vom Brechungsindex des Kerns und des kernumgebenen Materials abhängig ist. Letztlich eignet sich diese Technik für physikochemische Sensorik. Im Rahmen dieser Arbeit wurden die Gitter mit Hilfe einer relativen neuen Herstellungsmethode in die Fasern geschrieben [3]. Anschließend stand die Entwicklung eines Biosensors im Vordergrund, wobei zunächst ein Protokoll zum Ätzen der Faser mit Flusssäure entwickelt worden ist, dass das System sensitiv zum umgebenen Brechungsindex macht. Am Ende wurde ein Modellaufbau realisiert, indem ein Modellsystem, hier die Detektion vom C-reaktiven Protein mittels spezifischen einzelsträngigen DNS-Aptameren, erfolgreich getestet und quantifiziert worden ist. 1 Mandal, S.; Erickson, D. Nanoscale Optofluidic Sensor Arrays. Opt. Express 2008, 16 (3), 1623–1631. 2 Hill, K. O.; Fujii, Y.; Johnson, D. C.; Kawasaki, B. S. Photosensitivity in Optical Fiber Waveguides: Application to Reflection Filter Fabrication. Appl. Phys. Lett. 1978, 32 (10), 647–649. 3 Martínez, A.; Dubov, M.; Khrushchev, I.; Bennion, I. Direct Writing of Fibre Bragg Gratings by Femtosecond Laser. Electron. Lett. 2004, 40 (19), 1170. N2 - In this thesis, the development of a sensor platform for biochemical applications based on an optical detection principle is in the foreground. Two complementary concept ideas address during development, one based on photonic crystals next to waveguide structures and on the other with a fiber-based sensor containing chemically modified fiber Bragg gratings. The optical detection principle in both sensor ideas is the resulting refractive index change as a measurable physicochemical parameter. Lord Rayleigh described the well-known phenomenon of photonic crystals, which can be found among others in opals and butterflies, already in 1887. He described the optical properties of periodic multilayer films, which can be understood as a simplified model of a one-dimensional photonic crystal. The periodicity of the refractive index change results in an optical filter for frequencies in a certain spectral range, which is why no light propagation is possible there. However, if this is disturbed by a defect point in the refractive index periodicity, resulting in two perfectly periodic systems, the light propagation for a given frequency is still possible. This results in a narrowband signal in the transmission spectrum. The permitted frequency is dependent, inter alia, on the refractive index difference of the periodic system, that is, changing the refractive index of a layer leads to a spectral shift of the permitted frequency, thereby this sensor concept can be exploit for biochemical sensors [1]. This development of the sensor based on photonic crystals was a cooperation with the industrial partner “Nanoplus GmbH“. In the doctoral thesis, simulations and practical work for the design development of the sensor and the work on a first model set-up for the biochemical applications were carried out. For the fiber-based sensor, fiber Bragg gratings were written into the fiber core. Hill et al. discovered in 1978 that such lattice structures act as optical filters just like photonic crystals [2]. The gratings consist of changes in the refractive index in the fiber core. Over the next forty years, various inscription techniques and lattice structures have been developed, which is why the properties of the respective lattice structures vary. Such a lattice structure include the fiber Bragg gratings whose grating period, that is, the distances of the refractive index modifications, are in the nanometer to micrometer range. Due to the small grating period, a backward wave is generated in the core for a particular frequency, the Bragg wavelength. Ultimately, this results in a narrowband signal in both in the transmission spectrum, as well as in the reflection spectrum. The resonant wavelength is proportional to the grating period and the effective refractive index, which depends on the refractive index of the core and the core-surrounded material. Ultimately, this technique is suitable for physicochemical sensors. In this thesis, the gratings were written into the fibers using a relatively new manufacturing method [3]. Subsequently, the development of a biosensor was in the the foreground, whereby first a protocol for the etching of the fiber with hydrofluoric acid was developed, which makes the system sensitive to the surrounded refractive index. In the end, a model design was realized by successfully testing and quantifying a model system, here the detection of the C-reactive protein by means of specific single-stranded DNA aptamers. 1 Mandal, S.; Erickson, D. Nanoscale Optofluidic Sensor Arrays. Opt. Express 2008, 16 (3), 1623–1631. 2 Hill, K. O.; Fujii, Y.; Johnson, D. C.; Kawasaki, B. S. Photosensitivity in Optical Fiber Waveguides: Application to Reflection Filter Fabrication. Appl. Phys. Lett. 1978, 32 (10), 647–649. 3 Martínez, A.; Dubov, M.; Khrushchev, I.; Bennion, I. Direct Writing of Fibre Bragg Gratings by Femtosecond Laser. Electron. Lett. 2004, 40 (19), 1170. KW - Faser-Bragg-Gitter KW - fiber Bragg graiting KW - photonischer Kristall KW - photonic crystall KW - point-by-point-inscription method KW - Punkt-für-Punkt-Einschreibemethode KW - Faserätzen KW - fiber etching KW - optischer Fasersensor KW - fiber optical sensor KW - Aptamere KW - aptamers KW - C-reaktives Protein KW - c-reactive protein KW - Biomarker KW - biomarker Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-422139 ER - TY - THES A1 - Jensen, Anders Christian Solberg T1 - Structure and dynamics of amorphous carbonates related to biomineralization T1 - Struktur und Dynamik amorpher Carbonate im Zusammenhang mit der Biomineralisation BT - a neutron diffraction study N2 - Amorphous calcium carbonate(ACC) is a wide spread biological material found in many organisms, such as sea Urchins and mollusks, where it serves as either a precursor phase for the crystalline biominerals or is stabilized and used in the amorphous state. As ACC readily crystallizes, stabilizers such as anions, cations or macromolecules are often present to avoid or delay unwanted crystallization. Furthermore, additives often control the properties of the materials to suit the specific function needed for the organism. E.g. cystoliths in leaves that scatter light to optimize energy uptake from the sun or calcite/aragonite crystals used in protective shells in mussels and gastropods. Lifetime of the amorphous phase is controlled by the kinetic stability against crystallization. This has often been linked to water which plays a role in the mobility of ions and hence the probability of forming crystalline nuclei to initiate crystallization. However, it is unclear how the water molecules are incorporated within the amorphous phase, either as liquid confined in pores, as structural water binding to the ions or as a mixture of both. It is also unclear how this is perturbed when additives are added, especially Mg2+, one the most common additives found in biogenic samples. Mg2+ are expected to have a strong influence on the water incorporated into ACC, given the high energy barrier to dehydration of magnesium ions compared to calcium ions in solution. During the last 10-15 years, there has been a large effort to understand the local environment of the ions/molecules and how this affects the properties of the amorphous phase. But only a few aspects of the structure have so far been well-described in literature. The reason for this is partly caused by the low stability of ACC if exposed to air, where it tends to crystallize within minutes and by the limited quantities of ACC produced in traditional synthesis routes. A further obstacle has been the difficulty in modeling the local structure based on experimental data. To solve the problem of stability and sample size, a few studies have used stabilizers such as Mg2+ or OH- and severely dehydrated samples so as to stabilize the amorphous state, allowing for combined neutron and x-ray analysis to be performed. However, so far, a clear description of the local environments of water present in the structure has not been reported. In this study we show that ACC can be synthesized without any stabilizing additives in quantities necessary for neutron measurements and that accurate models can be derived with the help of empirical-potential structural refinement. These analyses have shown that there is a wide range of local environments for all of the components in the system suggesting that the amorphous phase is highly inhomogeneous, without any phase separation between ions and water. We also showed that the water in ACC is mainly structural and that there is no confined or liquid-like water present in the system. Analysis of amorphous magnesium carbonate also showed that there is a large difference in the local structure of the two cations and that Mg2+ surprisingly interacts with significantly less water molecules then Ca2+ despite the higher dehydration energy. All in all, this shows that the role of water molecules as a structural component of ACC, with a strong binding to cat- and anions probably retard or prevents the crystallization of the amorphous phase. N2 - Amorphes Calciumcarbonat (ACC) ist ein weit verbreitetes biologisches Material, das in vielen Organismen zu finden ist, beispielsweise in Seeigeln und Mollusken, wo es als Präkursorphase für kristalline Biomaterialien dient oder stabilisiert wird und im amorphen Zustand genutzt wird. Da ACC leicht kristallisiert, sind oft Stabilisatoren wie Anionen, Kationen und Makromoleküle zugegen, die eine ungewollte Kristallisation verzögern oder verhindern können. Zusätzlich kontrollieren Additive oftmals die Materialeigenschaften, um spezielle Funktionen erfüllen zu können, die der Organismus benötigt. Z.B. Zystolithen in Blättern, die das Licht streuen, um die Energieaufnahme durch das Sonnenlicht zu optimieren oder den Calcit-/Aragonitkristallen, die in den schützenden Schalen von Muscheln und Schnecken verwendet werden. Die Lebensdauer der amorphen Phase ist kontrolliert von der kinetischen Stabilität gegenüber der Kristallisation. Dies wurde oft mit Wasser verbunden, welches eine Rolle spielt für die Mobilität der Ionen und demzufolge für die Wahrscheinlichkeit der Bildung von Kristallisationskernen, die eine Kristallisation einleiten. Es ist jedoch unklar, wie die Wassermoleküle in die amorphe Phase integriert sind, ob als Flüssigkeit eingeschlossen in Poren, als strukturiertes Wasser gebunden an Ionen oder als Mischung aus beidem. Es ist ebenfalls unklar, wie dies gestört wird durch die Zugabe von Additiven, insbesondere Mg2+, eines der häufigsten Additive in biogenen Proben. Von Mg2+ wird ein starker Einfluss auf das in ACC integrierte Wasser vermutet, vergleicht man die hohe Energiebarriere gegen Dehydration von Magnesiumionen gegenüber Calciumionen in Lösung. Im Verlauf der letzten 10-15 Jahre wurden große Anstrengungen unternommen, um die lokale Umgebung der Ionen/Moleküle zu verstehen und wie diese die Eigenschaften der amorphen Phase beeinflusst. Jedoch wurden bisher nur wenige Aspekte der Struktur gut in der Literatur beschrieben. Dies wird zum Teil von der geringen Stabilität von ACC verursacht, wenn es der Luft ausgesetzt wird, wo es nach wenigen Minuten zur Kristallisation neigt und zum Teil von den begrenzten Mengen an ACC, welches auf traditionellen Synthesewegen produziert wird. Ein weiteres Hindernis stellte die Schwierigkeit dar, die lokale Struktur anhand von experimentellen Daten zu modellieren. Um das Problem der Stabilität und der Probenmenge zu beheben, haben einige Studien Stabilisatoren wie Mg2+ oder OH- und hochgradig dehydrierte Proben verwendet und dadurch den amorphen Zustand stabilisiert, welches eine kombinierte Neutronen- und Röntgenanalyse ermöglichte. Dennoch liegt bis jetzt keine klare Beschreibung der lokalen Umgebung von Wasser in der Struktur vor. In dieser Arbeit zeigen wir, dass ACC ohne stabilisierende Additive in Mengen hergestellt werden kann, wie sie für Neutronenmessungen benötigt werden und dass akkurate Modelle durch empirical-potential structural refinement abgeleitet werden können. Diese Analysen haben gezeigt, dass es eine große Bandbreite lokaler Umgebungen für alle Systemkomponenten gibt, was zu der Vermutung führt, dass die amorphe Phase hochgradig imhomogen ist ohne Phasentrennung zwischen Wasser und Ionen. Wir konnten ebenfalls zeigen, dass das Wasser in ACC hauptsächlich strukturiert ist und dass kein eingeschlossenes oder flüssigkeitsähnliches Wasser im System vorliegt. Die Analyse von amorphem Magnesiumcarbonat zeigte ebenfalls, dass es große Unterschiede in den lokalen Strukturen der beiden Kationen gibt und dass Mg2+ überraschenderweise mit signifikant weniger Wassermolekülen als Ca2+ interagiert, trotz der höheren Dehydrationsenergie. Zusammenfassend zeigt dies, dass die Wassermoleküle in der Rolle als strukturelle Komponenten von ACC, mit einer starken Bindung zu Kat- und Anionen wahrscheinlich die Kristallisation der amorphen Phase verzögern oder verhindern. KW - ACC KW - amorphes Calciumcarbonat KW - emperical potential structure refinement KW - Biomineralisierung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421691 ER - TY - THES A1 - Walther, Sebastian T1 - Funktionalisierung von Ölsäuremethylester und Alkydharzen für die photoinduzierte radikalische Polymerisation im UV Bereich N2 - Die vorliegende Arbeit behandelt die Synthese und Charakterisierung von funktionalisierten Alkydharzen und die photoinduzierte Polymerisation dieser unter Einsatz einer Quecksilberdampflampe oder einer UV LED mit unterschiedlicher Lichtintensität. Der Fokus dieser Arbeit bestand in der gezielten Substitution der internalen Doppelbindungen der Fettsäureester durch reaktivere Gruppen, wie Acrylate oder Methacrylate, welche für Alkydharze in dieser Form so in der Literatur nicht beschrieben sind. Untersuchungen des Polymerisationsverhaltens dieser funktionalisierten Harze wurden mit der Photo DSC durchgeführt, wobei Bis – (4 – methoxybenzoyl) diethylgermanium als Photoinitiator diente. Die Ergebnisse haben gezeigt, dass die Harze radikalisch polymerisiert werden können und eine geringere Abhängigkeit von der Umgebungsatmosphäre (Luftsauerstoff bzw. Stickstoff) vorliegt. Dies ist so in der Literatur für funktionalisierte Alkydharze nicht bekannt. Abmischungen von unterschiedlichen Monomeren und funktionalisierten Harzen bewirkten eine Steigerung der Viskosität sowie eine Verringerung der Sauerstoffinhibierung im Zuge der photoinduzierten Polymerisation unter Luftsauerstoff für die Quecksilberdampflampe und der UV LED. Zur Untersuchung der sauerstoffinhibierenden Wirkung der Harze sind Synthesen unterschiedlicher, funktionalisierter Ölsäuremethylester als Modellsubstanzen durchgeführt worden. Ein verbessertes Polymerisationsverhalten und eine geringe Abhängigkeit von der Umgebungsatmosphäre konnte für die Modelle nachgewiesen werden. Zur Aufklärung des verbesserten Polymerisationsverhaltens sind gezielt Substituenten (Imidazol, Brom, Alkohol, Acetat) in den funktionalisierten Ölsäuremethylester eingebaut worden, um den Einfluss dieser aufzuzeigen. Im Rahmen dieser Synthesen sind neuartige Strukturen synthetisiert worden, welche so in der Literatur nicht beschrieben sind. Die Gegenüberstellung der Polymerisationszeit, der Umsatz der (Meth-)Acrylatgruppen sowie die Zeit zum Erreichen der maximalen Polymerisationsgeschwindigkeit unter Verwendung von unterschiedlichen UV Lichtquellen hat einen Einfluss der Substituenten auf das Polymerisationsverhalten gezeigt. N2 - The present work deals with the synthesis and characterization of functionalized alkyl resins and the photoinduced polymerization of them with different UV light sources. The focus of this work was the targeted substitution of the internal double bonds of fatty acid esters by more reactive groups such as acrylates or methacrylates, which are not described in the literature for alkyd resins in this form. Differences in the basic polymerizability of these functionalized resins were carried out with the Photo DSC, with Bis – (4 – methoxybenzoyl) diethylgermane serving as the photoinitiator. The results showed that the resins could be radically polymerized and also had a lower dependence on the ambient atmosphere. This is not described in the literature for functionalized alkyd resins. Blends of different monomers and the functionalized resins also showed that in addition to the increase in viscosity and the polymerizability of the monomers was improved under atmospheric oxygen. The reference used was methyl oleate, which had been functionalized via the same routes of synthesis and polymerized photochemically. In the context of these syntheses, novel monomers have been synthesized which are thus unknown in the literature.
The reference substances confirmed the behavior of the functionalized resins and showed improved polymerization behavior under atmospheric oxygen. To elucidate these properties, different functionalized methyl oleate have been synthesized to investigate the influence of the substituents on the polymerizability under atmospheric oxygen. In particular, the polymerization time, the conversion of the (meth) acrylate groups and the time to reach the maximum polymerization rate played a decisive role. T2 - Functionalization of methyl oleate and alkyd resins for the photoinduced radical polymerization in the UV region KW - UV KW - Alkydharze KW - Fettsäuren KW - Funktionalisierte Ölsäuremethylester KW - Polymerisation KW - Druckfarben KW - Alkyd resin KW - printing inks KW - fatty acids KW - functionalized methyl oleate KW - polymerization KW - UV Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421467 ER - TY - THES A1 - Karras, Manfred T1 - Synthesis of enantiomerically pure helical aromatics such as NHC ligands and their use in asymmetric catalysis T1 - Die Synthese von enantiomerenreinen helikalen Aromaten wie NHC Liganden und deren Anwendung in asymmetrischer Katalyse N2 - Diese Arbeit beschäftigt sich mit der enantiomerenreinen Synthese helikaler, aromatischer Verbindungen. Verschiedene Verbindungen dieses Typs wurden erfolgreich hergestellt und charakterisiert. Desweiteren wurden einige der neuen Verbindungen in Übergangsmetallkomplexe eingebaut und diese dann als Katalysatoren für Metathese und Kreuzkupplungen getestet. Einer der getesteten Katalysatoren zeigte vielversprechende Ergebnisse in der asymmetrischen Olefinmetathese. Die Struktur des neuen Katalysators wurde untersucht. Anhand der Struktur des neuen Katalysators wurden Rückschlüsse auf einen möglichen Mechanismus gezogen. N2 - Various ways of preparing enantiomerically pure 2-amino[6]helicene derivatives were explored. Ni(0) mediated cyclotrimerization of enantiopure triynes provided (M)- and (P)-7,8-bis(p-tolyl)hexahelicene-2-amine in >99% ee as well as its benzoderivative in >99% ee. The stereocontrol was found to be inefficient for a 2- aminobenzo[6]helicene congener with an embedded five-membered ring. Helically chiral imidazolium salts bearing one or two helicene moieties have been synthesized and applied in enantioselective [2+2+2] cyclotrimerization catalyzed by an in situ formed Ni(0)-NHC complex. The synthesis of the first helically chiral Pd- and Ru-NHC complexes and their application in enantioselective catalysis was demonstrated. The latter shows promising results in enantioselective olefin metathesis reactions. A mechanistic proposal for asymmetric ring closing metathesis is provided. KW - helicene KW - catalysis KW - NHC KW - asymmetric KW - Helicen KW - Katalyse KW - NHC KW - asymmetrisch Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421497 ER - TY - THES A1 - Villatoro Leal, José Andrés T1 - A combined approach for the analysis of biomolecules using IR-MALDI ion mobility spectrometry and molecular dynamics simulations of peptide ions in the gas phase T1 - Kombinierter Einsatz von IR-MALDI Ionenmobilitätsspektrometrie und Simulationen der Molekulardynamik von Peptidionen in der Gasphase zur Analyse von Biomolekülen N2 - The aim of this doctoral thesis was to establish a technique for the analysis of biomolecules with infrared matrix-assisted laser dispersion (IR-MALDI) ion mobility (IM) spectrometry. The main components of the work were the characterization of the IR-MALDI process, the development and characterization of different ion mobility spectrometers, the use of IR-MALDI-IM spectrometry as a robust, standalone spectrometer and the development of a collision cross-section estimation approach for peptides based on molecular dynamics and thermodynamic reweighting. First, the IR-MALDI source was studied with atmospheric pressure ion mobility spectrometry and shadowgraphy. It consisted of a metal capillary, at the tip of which a self-renewing droplet of analyte solution was met by an IR laser beam. A relationship between peak shape, ion desolvation, diffusion and extraction pulse delay time (pulse delay) was established. First order desolvation kinetics were observed and related to peak broadening by diffusion, both influenced by the pulse delay. The transport mechanisms in IR-MALDI were then studied by relating different laser impact positions on the droplet surface to the corresponding ion mobility spectra. Two different transport mechanisms were determined: phase explosion due to the laser pulse and electrical transport due to delayed ion extraction. The velocity of the ions stemming from the phase explosion was then measured by ion mobility and shadowgraphy at different time scales and distances from the source capillary, showing an initially very high but rapidly decaying velocity. Finally, the anatomy of the dispersion plume was observed in detail with shadowgraphy and general conclusions over the process were drawn. Understanding the IR-MALDI process enabled the optimization of the different IM spectrometers at atmospheric and reduced pressure (AP and RP, respectively). At reduced pressure, both an AP and an RP IR-MALDI source were used. The influence of the pulsed ion extraction parameters (pulse delay, width and amplitude) on peak shape, resolution and area was systematically studied in both AP and RP IM spectrometers and discussed in the context of the IR-MALDI process. Under RP conditions, the influence of the closing field and of the pressure was also examined for both AP and RP sources. For the AP ionization RP IM spectrometer, the influence of the inlet field (IF) in the source region was also examined. All of these studies led to the determination of the optimal analytical parameters as well as to a better understanding of the initial ion cloud anatomy. The analytical performance of the spectrometer was then studied. Limits of detection (LOD) and linear ranges were determined under static and pulsed ion injection conditions and interpreted in the context of the IR-MALDI mechanism. Applications in the separation of simple mixtures were also illustrated, demonstrating good isomer separation capabilities and the advantages of singly charged peaks. The possibility to couple high performance liquid chromatography (HPLC) to IR-MALDI-IM spectrometry was also demonstrated. Finally, the reduced pressure spectrometer was used to study the effect of high reduced field strength on the mobility of polyatomic ions in polyatomic gases. The last focus point was on the study of peptide ions. A dataset obtained with electrospray IM spectrometry was characterized and used for the calibration of a collision cross-section (CCS) determination method based on molecular dynamics (MD) simulations at high temperature. Instead of producing candidate structures which are evaluated one by one, this semi-automated method uses the simulation as a whole to determine a single average collision cross-section value by reweighting the CCS of a few representative structures. The method was compared to the intrinsic size parameter (ISP) method and to experimental results. Additional MD data obtained from the simulations was also used to further analyze the peptides and understand the experimental results, an advantage with regard to the ISP method. Finally, the CCS of peptide ions analyzed by IR-MALDI were also evaluated with both ISP and MD methods and the results compared to experiment, resulting in a first validation of the MD method. Thus, this thesis brings together the soft ionization technique that is IR-MALDI, which produces mostly singly charged peaks, with ion mobility spectrometry, which can distinguish between isomers, and a collision cross-section determination method which also provides structural information on the analyte at hand. N2 - Das Ziel dieser Arbeit war die Zusammenführung der schonende Ionisationsquelle Infrared Matrix-Assisted Laser Dispersion Ionization (IR-MALDI), der Isomer-diskriminierende Ionenmobilitätsspektrometrie und einer neuartigen, auf Molecular Dynamics (MD) Simulationen basierte Berechnungsmethode für Stoßquerschnitte. Der erste Schritt war die Charakterisierung des Flüssigkeitsdispersionsphänomens in IR-MALDI: Zwei verschiedenen Ionentransportmechanismen wurden nachgewiesen und weiter studiert. Die Beziehung zwischen Peakform, Diffusion, Desolvatation und Ionen Extraktionspuls wurde beschrieben. Die Geschwindigkeit der Ionen, die aus dem Dispersionsphänomen stammen, wurde durch Ionenmobilitätsspektrometrie und Shadowgraphie untersucht. Shadowgraphie hat ebenfalls das Verhalten des Dispersionsphänomens erläutert. Eine hohe, schnell abklingende initielle Geschwindigkeit wurde beobachtet. Das Verständnis des IR-MALDI Verfahrens ermöglichte die Optimierung der verschiedenen Ionenmobilität (IM) Spektrometer zum analytischen Zweck. Eine Atmosphärendruck- und zwei Niederdruckvariante von IM Spektrometern wurden mit gepulster Ionenextraktion genutzt. Die Pulsparameter (Pulsverzögerung, ‑breite, -höhe) und verschiedene elektrische Felder an unterschiedlichen Stellen der Spektrometer wurden systematisch variiert. Deren Einfluss auf die Peakauflösung und -fläche wurde untersucht und im Rahmen des IR-MALDI Verfahrens erklärt. Das Verständnis der Anatomie der Anfangsionenwolke wurde ebenfalls durch diese Experimente vertieft. Die analytische Leistungsfähigkeit eines IM-Spektrometers wurde dann untersucht. Nachweisgrenzen und lineare Bereiche wurden bestimmt und in Zusammenhang mit dem IR-MALDI Verfahren interpretiert. Anhand der Trennung von Isomeren und einfachen Mischungen wurde die Anwendung dieser Technik demonstriert und ihre Vorteile, die Detektion einfachgeladener Ionen und die Möglichkeit der HPLC-Kopplung (High Performance Liquid Chromatography), aufgezeigt. Mit dem Niederdruckspektrometer wurde der Einfluss hoher reduzierter Feldstärken auf die Ionenmobilität von polyatomische Ionen in polyatomische Gasen untersucht. Der letzte Schwerpunkt war die Charakterisierung von Peptidionen. Die Peptiden wurden mit Elektrospray (ESI) IM-Spektrometrie vermessen. Der hieraus erhaltene Datensatz diente zur Etablierung einer Stoßquerschnitt Berechnungsmethode mittels MD. Anstatt verschiedener Kandidat-Strukturen und deren Stoßquerschnitte, ergibt diese neuartige semi-automatisierte Methode einen einzigen, gemittelten Stoßquerschnitt. Die MD Methode wurde dann mit einer anderen, einfacheren Methode und mit den experimentellen Ergebnissen von ESI und IR-MALDI-IM Spektrometrie verglichen. Zudem wurde der Zusammenhang zwischen Ladungszustands- und Stoßquerschnittsdifferenzen zwischen den Peptiden untersucht. Weitere Strukturelle Informationen konnten aus den Simulationen extrahiert, und zur Charakterisierung der Peptiden verwendet werden. KW - Ion mobility spectrometry KW - Molecular dynamics KW - IR-MALDI KW - Peptides KW - Shadowgraphy KW - Liquid dispersion KW - Ionenmobilitätsspektrometrie KW - Molekulardynamik KW - Collision cross-section KW - IR-MALDI KW - Peptiden KW - Shadowgraphie KW - Stoßquerschnitt KW - Flüssigkeitszerstäubung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419723 ER - TY - THES A1 - Dai, Xiaolin T1 - Synthesis of artificial building blocks for sortase-mediated ligation and their enzymatic linkage T1 - Synthese von artifiziellen Bausteinen für Sortase-vermittelte Ligationen und deren enzymatische Verknüpfung N2 - Das Enzym Sortase A katalysiert die Bildung einer Peptidbindung zwischen der Erkennungssequenz LPXTG und einem Oligoglycin. Während vielfältige Ligationen zwischen Proteinen und verschiedenen Biomolekülen, Proteinen und kleinen synthetischen Molekülen, sowie Proteinen und Oberflächen durchgeführt wurden, besteht das Ziel dieser Arbeit darin, die Sortase-katalysierte Verlinkung von synthetischen Bausteinen zu untersuchen. Dies könnte den Weg bereiten für die Anwendung von Sortase A für chemische Aufgabenstellungen und eventuell sogar in den Materialwissenschaften. Für diese grundsätzliche Untersuchung wurden die verwendeten Bausteine zunächst so einfach wie möglich gehalten und leicht zugängliche SiO2 Nanopartikel und kommerziell erhältliche Polymerblöcke ausgewählt. Die Bausteine wurden als erstes mit den Peptidsequenzen für Sortase-vermittelte Ligationen funktionalisiert. SiO2 Nanopartikel wurden mit Durchmessern von 60 und 200 nm hergestellt und mit C=C Doppelbindungen oberflächenmodifiziert. Dann wurden Peptide mit einem terminalen Cystein kovalent durch eine Thiol-en Reaktion angebunden. An die 60 nm NP wurden Peptide mit einem Pentaglycin und an die 200 nm Partikel Peptide mit LPETG Sequenz gebunden. Auf die gleiche Art und Weise wurden Peptide mit terminalem Cystein an die Polymere Polyethylenglykol (PEG) und Poly(N Isopropylacrylamid) (PNIPAM), die beide über C=C Endgruppen verfügen, gebunden und G5-PEG und PNIPAM-LPETG Konjugate erhalten. Mit den vier Bausteinen wurden nun durch Sortase-vermittelte Ligation NP–Polymer Hybride, NP–NP und Polymer–Polymer Strukturen hergestellt und die Produkte u. a. durch Transmissionselektronen-mikroskopie, MALDI-ToF Massenspektrometrie sowie Dynamische Lichtstreuung charakterisiert. Die Verlinkung dieser synthetischen Bausteine konnte eindeutig gezeigt werden. Das Verwenden von kommerziell erhältlichen Polymeren hat jedoch zu einem Gemisch der Polymer-Peptid Konjugate mit unmodifiziertem Polymer geführt, welches nicht gereinigt werden konnte. Deswegen wurden anschließend Synthesestrategien für reine Peptid-Polymer und Polymer-Peptid Konjugate als Bausteine für Sortase-vermittelte Ligationen entwickelt. Diese basieren auf der RAFT Polymerisation mit CTAs, die entweder an N- oder C-Terminus eines Peptids gebunden sind. GG-PNIPAM wurde durch das Anbinden eines geeigneten RAFT CTAs an Fmoc-GG in einer Veresterungsreaktion, Polymerisation von NIPAM und Abspalten der Fmoc Schutzgruppe synthetisiert. Weiterhin wurden mehrere Peptide durch Festphasen-Peptidsynthese erhalten. Die Anbindung eines RAFT CTAs (oder eines Polymerisationsinitiators) an den N-Terminus eines Peptids kann automatisiert als letzter Schritt in einem Peptid-Synthetisierer erfolgen. Die Synthese eines solchen Konjugats konnte in dem Zeithorizont dieser Arbeit noch nicht erreicht werden. Jedoch existieren mehrere vielversprechende Strategien, um diesen Ansatz mit verschiedenen Kopplungsreagenzien zur Anbindung des CTAs fortzusetzen. Solche Polymer Bausteine können in Zukunft für die Synthese von Protein-Polymer Konjugaten durch Sortase-Katalyse verwendet werden. Außerdem kann der Ansatz auch für die Synthese von Block-Copolymeren aus Polymerblöcken mit Peptidmotiven an beiden Enden ausgebaut werden. Auch wenn bei der grundsätzlichen Untersuchung im Rahmen dieser Arbeit Hybridstrukturen hergestellt wurden, die auch durch traditionelle chemische Synthesen erhalten werden könnten, wird ein Bausatz solcher Bausteine in Zukunft die Synthese neuer Materialien ermöglichen und kann auch den Weg für die Anwendung von Enzymen in den Materialwissenschaften ebnen. In Ergänzung zu Nanopartikeln und Block-Copolymeren können dann auch Hybridmaterialien unter Einbezug von Protein-basierten Bausteinen hergestellt werden. Daher könnten Sortase Enzyme zu einem Werkzeug werden, welches etablierte chemische Verlinkungstechniken ergänzt und mit den hoch spezifischen Peptidmotiven über funktionale Einheiten verfügt, die orthogonal zu allen chemischen Gruppen sind. N2 - The enzyme Sortase A catalyzes the formation of a peptide bond between the recognition sequence LPXTG and an oligoglycine. While manifold ligations between proteins and various biomolecules, proteins and small synthetic molecules as well as proteins and surfaces have been reported, the aim of this thesis was to investigate the sortase-catalyzed linkage between artificial building blocks. Hence, this could pave the way for the use of sortase A for tasks from a chemical point of view and maybe even materials science. For the proof of concept, the studied systems were kept as simple as possible at first by choosing easily accessible silica NPs and commercially available polymers. These building blocks were functionalized with peptide motifs for sortase-mediated ligation. Silica nanoparticles were synthesized with diameters of 60 and 200 nm and surface modified with C=C functionalities. Then, peptides bearing a terminal cysteine were covalently linked by means of a thiol-ene reaction. 60 nm SiO2 NPs were functionalized with pentaglycines, while peptides with LPETG motif were linked to 200 nm silica particles. Polyethyleneglycol (PEG) and poly(N isopropylacrylamide) (PNIPAM) were likewise functionalized with peptides by thiol-ene reaction between cysteine residues and C=C units in the polymer end groups. Hence, G5-PEG and PNIPAM-LPETG conjugates were obtained. With this set of building blocks, NP–polymer hybrids, NP–NP, and polymer–polymer structures were generated by sortase-mediated ligation and the product formation shown by transmission electron microscopy, MALDI-ToF mass spectrometry and dynamic light scatting, among others. Thus, the linkage of these artificial building blocks by the enzyme sortase A could be demonstrated. However, when using commercially available polymers, the purification of the polymer–peptide conjugates was impossible and resulted in a mixture containing unmodified polymer. Therefore, strategies were developed for the own synthesis of pure peptide-polymer and polymer-peptide conjugates as building blocks for sortase-mediated ligation. The designed routes are based on preparing polymer blocks via RAFT polymerization from CTAs that are attached to N- or C-terminus, respectively, of a peptide. GG-PNIPAM was synthesized through attachment of a suitable RAFT CTA to Fmoc-GG in an esterification reaction, followed by polymerization of NIPAM and cleavage of the Fmoc protection group. Furthermore, several peptides were synthesized by solid-phase peptide synthesis. The linkage of a RAFT CTA (or polymerization initiator) to the N-terminus of a peptide can be conducted in an automated fashion as last step in a peptide synthesizer. The synthesis of such a conjugate couldn’t be realized in the time frame of this thesis, but many promising strategies exist to continue this strategy using different coupling reagents. Such polymer building blocks can be used to synthesize protein-polymer conjugates catalyzed by sortase A and the approach can be carried on to the synthesis of block copolymers by using polymer blocks with peptide motifs on both ends. Although the proof of concept demonstrated in this thesis only shows examples that can be also synthesized by exclusively chemical techniques, a toolbox of such building blocks will enable the future formation of new materials and pave the way for the application of enzymes in materials science. In addition to nanoparticle systems and block copolymers, this also includes combination with protein-based building blocks to form hybrid materials. Hence, sortase could become an enzymatic tool that complements established chemical linking technologies and provides specific peptide motifs that are orthogonal to all existing chemical functional groups. KW - sortase-mediated ligation KW - enzyme KW - block copolymers KW - nanoparticles KW - Ligation KW - Enzym KW - Block-Copolymere KW - Nanopartikel Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-420060 ER - TY - THES A1 - Roder, Phillip T1 - Kombination von Fluoreszenzmikroskopie und Rasterkraftmikroskopie zur Aufklärung physiologischer Prozesse in lebenden Zellen T1 - Combination of fluorescence microscopy and atomic force microscopy for the investigation of physiological processes in living cells BT - Charakterisierung und Anwendung einer neuartigen lokalen Mikromanipulationstechnik BT - characterisation and application of a novel local micromanipulation technique N2 - Innerhalb dieser Doktorarbeit wurde eine neuartige Mikromanipulationstechnik für die lokale Flüssigkeitsabgabe am komplexen Drüsengewebe der Schabe P. americana charakterisiert und für die damit verbundene gezielte Manipulation von einzelnen Zellen in einem Zellkomplex (Gewebe) angewandt. Bei dieser Mikromanipulationstechnik handelt es sich um die seit 2009 bekannte nanofluidische Rasterkraftmikroskopie (FluidFM = fluidic force microscopy). Dabei werden sehr kleine mikrokanälige Rasterkraftspitzen bzw. Mikro-/Nanopipetten mit einer Öffnung zwischen 300 nm und 2 µm verwendet, mit denen es möglich ist, sehr kleine Volumina im Pikoliter- bis Femtoliter-Bereich (10-12 L – 10-15 L) gezielt und ortsgenau abzugeben. Das Ziel dieser Arbeit war die Analyse zellulärer Prozesse, wie z. B. Zell-Zell-Kommunikation oder Signalweiterleitung, zwischen benachbarten Zellen unter Zuhilfenahme der Fluoreszenzmikroskopie. Mit dieser Methode können die Zellen und ihre Bestandteile mittels vorheriger Farbstoffbeladung unter einem Mikroskop mit hohem Kontrast optisch dargestellt werden. Mit Hilfe der Fluoreszenzmikroskopie sollten schlussendlich die zellulären Reaktionen innerhalb des Gewebes nach der lokalen Manipulation visualisiert werden. Zunächst wurde die Anwendung des Systems an Luft und wässriger Umgebung beschrieben. In diesem Zusammenhang wurde eine Reinigungs- und Beladungsmethode entwickelt, mit der es möglich war, die kostspieligen Mikro-/Nanopipetten zu reinigen und anschließend mehrmals wiederzuverwenden. Hierzu wurde eine alternative Methode getestet, mit der das Diffusionsverhalten von Farbstoffmolekülen in unterschiedlichen Medien untersucht werden kann. Des Weiteren wurden die Systemparameter optimiert, welche nötig sind, um zwischen der Probenoberfläche und der Pipette einen guten Pipettenöffnungs-abschluss zu erhalten. Dieser Abschluss ist essentiell, damit die abgegebene Flüssigkeit ausschließlich in der Abgaberegion mit der Probe wechselwirkt und die darauffolgenden Reaktionen nur innerhalb des Gewebes erfolgen, da ansonsten die Zell-Zell-Signalweiterleitung zwischen den Zellen nicht eindeutig nachvollzogen werden kann. Diese interzelluläre Kommunikation wurde anhand zweier sekundärer Botenstoffe (Ca2+ und NO) untersucht. Hierbei war es möglich einzelne lokale Reaktionen zu detektieren, welche sich über weitere Zellen ausbreiteten. Schlussendlich wurde die Fertigung einer speziellen Injektionspipette beschrieben, welche an zwei biologischen Systemen getestet wurde. N2 - Within this thesis, a novel micromanipulation technique was characterised for the local liquid delivery at the complex salivary glands tissue of the cockroach P. americana and was applied for the associated targeted manipulation of single cells in a cell complex (tissue). This micromanipulation technique is known since 2009 as the fluidic force microscopy (FluidFM) technique. In this case, very small microchanneled AFM tips or rather micro-/nanopipettes with an opening between 300 nm and 2 μm are used to deliver very small volumes in the picoliter to femtoliter range (10-12 L - 10-15 L) targeted and accurate. The aim of this work was the analysis of cellular processes, such as cell-cell communication or signal transduction, between adjacent cells using fluorescence microscopy. Using this method, the cells and their components can be optically visualised by prior dye loading under a microscope with high contrast. Using fluorescence microscopy, the cellular responses within the tissue were finally visualised after local manipulation. First, the application of the system in air and aqueous environment was described. In this context, a cleaning and loading method was developed which allows the cleaning and the repeated reuse of the expensive micro-/nanopipettes. For this purpose, an alternative method has been tested, with which the diffusion of dye molecules in different media can be examined. Furthermore, the system parameters needed to obtain a good pipette opening sealing between the sample surface and the pipette have been optimised. This sealing is essential to ensure that the delivered liquid interacts only with the sample in the delivery region and that subsequent reactions occur only within the tissue, otherwise cell-cell signaling between the cells can not be clearly understood. This intercellular communication was studied by means of two secondary messengers (Ca2+ and NO). Here it was possible to detect individual local reactions that spread over more cells. Finally, the production of a special injection pipette was described, which was tested on two biological systems. KW - Rasterkraftmikroskopie KW - Fluoreszenzmikroskopie KW - Mikromanipulation KW - Zellgewebe KW - Diffusion KW - atomic force microscopy KW - fluorescence microscopy KW - micromanipulation KW - cellular tissue KW - diffusion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419806 ER - TY - THES A1 - Schimka, Selina T1 - Photoresponsive soft nano-objects BT - Non-colvalently bound azobenzene containing molecules and their interaction with DNA, microgels and upconverting nanopaticles to enable biological application Y1 - 2018 ER - TY - THES A1 - Abouserie, Ahed T1 - Ionic liquid precursors for multicomponent inorganic nanomaterials T1 - Ionische Flüssigkeiten als Vorstufe für anorganische Mehrkomponenten-Nanomaterialien N2 - Health effects, attributed to the environmental pollution resulted from using solvents such as benzene, are relatively unexplored among petroleum workers, personal use, and laboratory researchers. Solvents can cause various health problems, such as neurotoxicity, immunotoxicity, and carcinogenicity. As such it can be absorbed via epidermal or respiratory into the human body resulting in interacting with molecules that are responsible for biochemical and physiological processes of the brain. Owing to the ever-growing demand for finding a solution, an Ionic liquid can use as an alternative solvent. Ionic liquids are salts in a liquid state at low temperature (below 100 C), or even at room temperature. Ionic liquids impart a unique architectural platform, which has been interesting because of their unusual properties that can be tuned by simple ways such as mixing two ionic liquids. Ionic liquids not only used as reaction solvents but they became a key developing for novel applications based on their thermal stability, electric conductivity with very low vapor pressure in contrast to the conventional solvents. In this study, ionic liquids were used as a solvent and reactant at the same time for the novel nanomaterials synthesis for different applications including solar cells, gas sensors, and water splitting. The field of ionic liquids continues to grow, and become one of the most important branches of science. It appears to be at a point where research and industry can work together in a new way of thinking for green chemistry and sustainable production. N2 - Der Einfluss von kommerziellen organischen Lösungsmitteln auf den menschlichen Körper ist bekannt, jedoch nicht ausreichend untersucht worden. Spezielle Lösungsmittel wie Benzol, welche auch vermehrt in der Petrolchemie genutzt werden, zeigen akute Toxizität auf den biologischen Organismus. Daher ist der Bedarf der Verwendung eines alternativen Lösungsmittel groß. Ionische Flüssigkeiten können hier potentiell eine Alternative sein. Als Ionische Flüssigkeiten (ILs) werden Salze in flüssigem Zustand bei niedriger Temperatur (unter 100 °C) oder sogar bei Raumtemperatur definiert. Aufgrund ihrer Variabilität in der Zusammensetzung der strukturellen ionischen Moleküle ergeben sich ungewöhnliche Eigenschaften, welche auf einfachste Weise durch Mischen zweier ionischer Flüssigkeiten beliebig angepasst werden können. ILs werden sowohl als gewöhnliche Lösungsmittel verwendet, jedoch entwickelten sie sich aufgrund ihrer besonderen Eigenschaften vermehrt zu Reaktionsagenzien. Dies ist zurückzuführen auf ihre gute thermische Stabilität, elektrische Leitfähigkeit und ihrem geringen Dampfdruck. In dieser Arbeit wurden nun spezielle Ionische Flüssigkeiten speziell auf ihr Verhalten in chemischen Reaktionen als Reagenz untersucht. Als Ausgangsreaktion diente hierbei eine neuartige Synthese von Nanomaterialen, welche speziell in Solarzellen, Gassensoren und auch in der katalytischen Wasserspaltung genutzt werden. Das Anwendungspotenzial der ILs gewinnt immer mehr an Bedeutung und führt in der Forschung sowie auch in der Industrie zu neuen Denkweisen für nachhaltige Produktionen und auch Entwicklungen. KW - ionic liquids KW - Alkylpyridinium salts KW - Structure elucidation KW - Phase transitions KW - Nanoparticles KW - Metal Chalcogenides KW - Organic photovoltaic Cell KW - Ionische Flüssigkeiten KW - Alkylpyridinium-Salze KW - Strukturaufklärung KW - Phasenübergänge KW - Nanopartikel KW - Metallchalkogenide KW - Organische Photovoltaikzelle Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418950 ER - TY - THES A1 - Behrendt, Felix Nicolas T1 - New bio-based polymers T1 - Neue biobasierte Polymere BT - synthesis and polymerization of cystine-based macrocycles BT - Synthese und Polymerisation von cystinbasierten Makrozyklen N2 - Redox-responsive polymers, such as poly(disulfide)s, are a versatile class of polymers with potential applications including gene- and drug-carrier systems. Their degradability under reductive conditions allows for a controlled response to the different redox states that are present throughout the body. Poly(disulfide)s are typically synthesized by step growth polymerizations. Step growth polymerizations, however, may suffer from low conversions and therefore low molar masses, limiting potential applications. The purpose of this thesis was therefore to find and investigate new synthetic routes towards the synthesis of amino acid-based poly(disulfide)s. The different routes in this thesis include entropy-driven ring opening polymerizations of novel macrocyclic monomers, derived from cystine derivatives. These monomers were obtained with overall yields of up to 77% and were analyzed by mass spectrometry as well as by 1D and 2D NMR spectroscopy. The kinetics of the entropy-driven ring-opening metathesis polymerization (ED-ROMP) were thoroughly investigated in dependence of temperature, monomer concentration, and catalyst concentration. The polymerization was optimized to yield poly(disulfide)s with weight average molar masses of up to 80 kDa and conversions of ~80%, at the thermodynamic equilibrium. Additionally, an alternative metal free polymerization, namely the entropy-driven ring-opening disulfide metathesis polymerization (ED-RODiMP) was established for the polymerization of the macrocyclic monomers. The effect of different solvents, concentrations and catalyst loadings on the polymerization process and its kinetics were studied. Polymers with very high weight average molar masses of up to 177 kDa were obtained. Moreover, various post-polymerization reactions were successfully performed. This work provides the first example of the homopolymerization of endo-cyclic disulfides by ED-ROMP and the first substantial study into the kinetics of the ED-RODiMP process. N2 - Redoxresponsive Polymere, wie etwa Polydisulfide, sind eine vielseitige Klasse von Polymeren, die unter anderem als Gen- und Wirkstoffträgersysteme eingesetzt werden können. Ihre Abbaubarkeit unter reduktiven Bedingungen ermöglicht eine kontrollierte Reaktion auf die verschiedenen Redoxzustände im Körper. Polydisulfide werden jedoch häufig durch Stufenwachstums-polymerisationen synthetisiert. Diese führen oft zu niedrigen Umsätzen und daher zu niedrigen molaren Massen. Das Ziel dieser Arbeit war daher neue Synthesewege für aminosäurebasierte Polydisulfide zu finden und zu untersuchen. Diese Wege beinhalteten entropiegetriebene ringöffnende Polymerisationen von neuen makrozyklischen Monomeren, auf der Basis von Cystin-Derivaten. Diese Monomere konnten mit einer Gesamtausbeute von bis zu 77% synthetisiert werden und wurden mit Massenspektrometrie sowie mit 1D- und 2D-NMR-Spektroskopie analysiert. Die Kinetik der entropiegetriebenen ringöffnenden Metathese Polymerisation (ED-ROMP) wurde im Hinblick auf Temperatur, Monomerkonzentration und Katalysatormenge sorgfältig untersucht. Durch Optimierungen konnten Polydisulfide mit gewichtsmittleren Molmassen von bis zu 80 kDa und Umsätzen von ~80%, im thermodynamischen Gleichgewicht synthetisiert werden. Zusätzlich wurde eine alternative metallfreie Polymerisation, die entropiegetriebene ringöffnende Disulfidmetathese Polymerisation (ED-RODiMP), für die Polymerisation der makrozyklischen Monomere etabliert. Die Auswirkungen verschiedener Lösungsmittel, Konzentrationen und Katalysatorkonzentrationen auf die Kinetik dieses Polymerisationsprozesses wurden untersucht. Hierdurch wurden Polymere mit sehr hohen gewichtsmittleren Molmassen von bis zu 177 kDa erhalten. Darüber hinaus wurden verschiedene Postpolymerisationsreaktionen erfolgreich durchgeführt. Diese Arbeit liefert das erste Beispiel für die Homopolymerisation endo-zyklischer Disulfide durch ROMP und eine erste substanzielle Studie der Kinetik des ED-RODiMP-Prozesses. KW - polymers KW - ADMET KW - ROMP KW - disulfide KW - macrocycles KW - ring-opening polymerization KW - amino acids KW - Polymere KW - ADMET KW - ROMP KW - Disulfide KW - Makrozyklen KW - ringöffnende Polymerisation KW - Aminosäuren Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418316 ER - TY - THES A1 - Xiong, Tao T1 - Vibrationally resolved absorption, emission, resonance Raman and photoelectron spectra of selected organic molecules, associated radicals and cations T1 - Schwingungsaufgelöste Absorptions-, Emissions-, Resonanz-Raman- und Photoelektronenspektren ausgewählter organischer Moleküle, assoziierter Radikale und Kationen BT - a time-dependent approach BT - ein zeitabhängiger Ansatz N2 - Time-dependent correlation function based methods to study optical spectroscopy involving electronic transitions can be traced back to the work of Heller and coworkers. This intuitive methodology can be expected to be computationally efficient and is applied in the current work to study the vibronic absorption, emission, and resonance Raman spectra of selected organic molecules. Besides, the "non-standard" application of this approach to photoionization processes is also explored. The application section consists of four chapters as described below. In Chapter 4, the molar absorptivities and vibronic absorption/emission spectra of perylene and several of its N-substituted derivatives are investigated. By systematically varying the number and position of N atoms, it is shown that the presence of nitrogen heteroatoms has a negligible effect on the molecular structure and geometric distortions upon electronic transitions, while spectral properties are more sensitive: In particular the number of N atoms is important while their position is less decisive. Thus, N-substitution can be used to fine-tune the optical properties of perylene-based molecules. In Chapter 5, the same methods are applied to study the vibronic absorption/emission and resonance Raman spectra of a newly synthesized donor-acceptor type molecule. The simulated absorption/emission spectra agree fairly well with experimental data, with discrepancies being attributed to solvent effects. Possible modes which may dominate the fine-structure in the vibronic spectra are proposed by analyzing the correlation function with the aid of Raman and resonance Raman spectra. In the next two chapters, besides the above types of spectra, the methods are extended to study photoelectron spectra of several small diamondoid-related systems (molecules, radicals, and cations). Comparison of the photoelectron spectra with available experimental data suggests that the correlation function based approach can describe ionization processes reasonably well. Some of these systems, cationic species in particular, exhibit somewhat peculiar optical behavior, which presents them as possible candidates for functional devices. Correlation function based methods in a more general sense can be very versatile. In fact, besides the above radiative processes, formulas for non-radiative processes such as internal conversion have been derived in literature. Further implementation of the available methods is among our next goals. N2 - Molekülsysteme bestehen aus Kernen und Elektronen, deren viel kleinere Masse sie in die Lage versetzten, sich der Bewegung des ersteren augenblicklich anzupassen. Daher ist die Bewegung der Elektronen und Kerne in einer guten ersten Annäherung "unabhängig", und die Energie der Elektronen kann zuerst berechnet werden, vorausgesetzt, die Kerne sind stationär. Die so gewonnene elektronische Energie wird zur Abstoßungsenergie zwischen den Kernen addiert, um ein Potential zu erhalten, das die Bewegung der Kerne bestimmt. Quantenmechanisch können sowohl die Elektronen als auch die Kerne nur bestimmte Energieniveaus haben. Die molekulare vibronische (= Schwingung + Elektronik) Absorptionsspektroskopie beinhaltet den Übergang der Elektronen und Kerne von ihrem Anfangs- in ihren Endzustand durch Photonenabsorption. Die größere elektronische Übergangsenergie bestimmt die Position des Absorptionsmaximums, während die kleinere nukleare Schwingungsübergangsenergie (ohne Berücksichtigung von Translation und Rotation) die Position der Teilmaxima innerhalb des Absorptionsbereichs bestimmt, wodurch die vibronische Feinstruktur entsteht. Ähnliche Ideen gelten auch für die vibronische Emissionsspektroskopie. Die Resonanz-Raman-Spektroskopie untersucht die Energieänderung des einfallenden Photons (dessen Energie ausreichend ist, um die Elektronen in einen höheren elektronischen Zustand anzuregen), nachdem es mit dem Molekül wechselwirkt. Der Energiegewinn oder -verlust des einfallenden Photons bewirkt eine Änderung des Schwingungszustandes. Die Photoelektronenspektroskopie ist ähnlich wie die vibronische Absorption, benötigt aber in der Regel mehr Energie des einfallenden Photons, da neben der Anregung des Moleküls in einen höheren vibronischen Zustand zusätzliche Energie benötigt wird, um ein Elektron aus dem Molekül zu entfernen. Diese spektroskopischen Techniken liefern wertvolle Informationen über die elektronische und nukleare Bewegung des Moleküls. Theoretisch können wir eine zeitabhängige Korrelationsfunktion verwenden, um die Spektren zu simulieren. Die Korrelationsfunktion für die Absorption ist beispielsweise eine Funktion der Zeit, deren Entwicklung Informationen über die elektronischen Energien und die nukleare Bewegung enthält. Um das Absorptionsspektrum in Form von Energie zu erhalten, wird ein mathematisches Verfahren, die so genannte Fourier-Transformation, auf die zeitabhängige Korrelationsfunktion angewendet, um ein energieabhängiges Spektrum zu erhalten. Diese Methode wird auf ausgewählte organische Moleküle, darunter einige Radikale und Kationen, angewandt, um deren elektronisches und optisches Verhalten unter dem Einfluss von einfallendem Licht zu untersuchen und Einblicke in das Design neuer optoelektronischer Bauelemente zu gewinnen. Bei einigen Molekülen/Systemen wird die vibronische Feinstruktur durch Faktoren wie molekulare Zusammensetzung und Umgebung wie Lösungsmittel beeinflusst, was darauf hindeutet, dass diese Systeme zur Feinabstimmung der gewünschten Eigenschaften verwendet werden können. Für andere Systeme gibt es fast keine sichtbare vibronische Feinstruktur, was bedeutet, dass sich die nukleare Bewegung solcher Systeme im Allgemeinen von derjenigen der vorherigen Kategorie unterscheidet. KW - vibrationally resolved electronic spectroscopy KW - photoelectron spectroscopy KW - resonance Raman spectroscopy KW - correlation function KW - ionization potential KW - time-dependent density functional theory KW - perylene KW - diamondoid KW - Schwingungsaufgelöste UV/VIS-Spektroskopie KW - Photoelektronenspektroskopie KW - Resonanz-Raman-Spektroskopie KW - Korrelationsfunktion KW - Ionisationspotential KW - Zeitabhängige Dichtefunktionaltheorie KW - Perylen KW - Diamondoide Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418105 ER - TY - THES A1 - Tröger-Müller, Steffen T1 - Truly sustainable imidazolium ionics BT - towards expanding applicability in next-generation batteries Y1 - 2018 ER - TY - THES A1 - Tan, Li T1 - Synthesis, assembly and thermo-responsivity of polymer-functionalized magnetic cobalt nanoparticles T1 - Synthese, Assemblierung und Temperatur-Responsivität von Polymer-funktionalisierten magnetischen Cobalt Nanopartikeln N2 - This thesis mainly covers the synthesis, surface modification, magnetic-field-induced assembly and thermo-responsive functionalization of superparamagnetic Co NPs initially stabilized by hydrophobic small molecules oleic acid (OA) and trioctylphosphine oxide (TOPO), as well as the synthesis of both superparamagnetic and ferromagnetic Co NPs by using end-functionalized-polystyrene as stabilizer. Co NPs, due to their excellent magnetic and catalytic properties, have great potential application in various fields, such as ferrofluids, catalysis, and magnetic resonance imaging (MRI). Superparamagnetic Co NPs are especially interesting, since they exhibit zero coercivity. They get magnetized in an external magnetic field and reach their saturation magnetization rapidly, but no magnetic moment remains after removal of the applied magnetic field. Therefore, they do not agglomerate in the body when they are used in biomedical applications. Normally, decomposition of metallic precursors at high temperature is one of the most important methods in preparation of monodisperse magnetic NPs, providing tunability in size and shape. Hydrophobic ligands like OA, TOPO and oleylamine are often used to both control the growth of NPs and protect them from agglomeration. The as-prepared magnetic NPs can be used in biological applications as long as they are transferred into water. Moreover, their supercrystal assemblies have the potential for high density data storage and electronic devices. In addition to small molecules, polymers can also be used as surfactants for the synthesis of ferromagnetic and superparamagnetic NPs by changing the reaction conditions. Therefore, chapter 2 gives an overview on the basic concept of synthesis, surface modification and self-assembly of magnetic nanoparticles. Various examples were used to illustrate the recent work. The hydrophobic Co NPs synthesized with small molecules as surfactants limit their biological applications, which require a hydrophilic or aqueous environment. Surface modification (e.g., ligand exchange) is a general idea for either phase transition or surface-functionalization. Therefore, in chapter 3, a ligand exchange process was conducted to functionalize the surface of Co NPs. PNIPAM is one of the most popular smart polymers and its lower critical solution temperature (LCST) is around 32 °C, with a reversible change in the conformation structure between hydrophobic and hydrophilic. The novel nanocomposites of superparamagnetic Co NPs and thermo-responsive PNIPAM are of great interest. Thus, well-defined superparamagnetic Co NPs were firstly synthesized through the thermolysis of cobalt carbonyl by using OA and TOPO as surfactants. A functional ATRP initiator, containing an amine (as anchoring group) and a 2-bromopropionate group (SI-ATRP initiator), was used to replace the original ligands. This process is rapid and facial for efficient surface functionalization and afterwards the Co NPs can be dispersed into polar solvent DMF without aggregation. FT-IR spectroscopy showed that the TOPO was completely replaced, but a small amount of OA remained on the surface. A TGA measurement allowed the calculation of the grafting density of the initiator as around 3.2 initiator/nm2. Then, the surface-initiated ATRP was conducted for the polymerization of NIPAM on the surface of Co NPs and rendered the nanocomposites water-dispersible. A temperature-dependent dynamic light scattering study showed the aggregation behavior of PNIPAM-coated Co NPs upon heating and this process was proven to be reversible. The combination of superparamagnetic and thermo-responsive properties in these hybrid nanoparticles is promising for future applications e.g. in biomedicine. In chapter 4, the magnetic-field-induced assembly of superparamagnetic cobalt nanoparticles both on solid substrates and at liquid-air interface was investigated. OA- and TOPO-coated Co NPs were synthesized via the thermolysis of cobalt carbonyl and dispersed into either hexane or toluene. The Co NP dispersion was dropped onto substrates (e.g., TEM grid, silicon wafer) and at liquid-air (water-air or ethylene glycol-air) interface. Due to the attractive dipolar interaction, 1-D chains formed in the presence of an external magnetic field. It is known that the concentration and the strength of the magnetic field can affect the assembly behavior of superparamagnetic Co NPs. Therefore, the influence of these two parameters on the morphology of the assemblies was studied. The formed 1-D chains were shorter and flexible at either lower concentration of the Co NP dispersion or lower strength of the external magnetic field due to thermal fluctuation. However, by increasing either the concentration of the NP dispersion or the strength of the applied magnetic field, these chains became longer, thicker and straighter. The reason could be that a high concentration led to a high fraction of short dipolar chains, and their interaction resulted in longer and thicker chains under applied magnetic field. On the other hand, when the magnetic field increased, the induced moments of the magnetic nanoparticles became larger, which dominated over the thermal fluctuation. Thus, the formed short chains connected to each other and grew in length. Thicker chains were also observed through chain-chain interaction. Furthermore, the induced moments of the NPs tended to direct into one direction with increased magnetic field, thus the chains were straighter. In comparison between the assembly on substrates, at water-air interface and at ethylene glycol-air interface, the assembly of Co NPs in hexane dispersion at ethylene glycol-air interface showed the most regular and homogeneous chain structures due to the better spreading of the dispersion on ethylene glycol subphase than on water subphase and substrates. The magnetic-field-induced assembly of superparamagnetic nanoparticles could provide a powerful approach for applications in data storage and electronic devices. Chapter 5 presented the synthesis of superparamagnetic and ferromagnetic cobalt nanoparticles through a dual-stage thermolysis of cobalt carbonyl (Co2(CO)8) by using polystyrene as surfactant. The amine end-functionalized polystyrene surfactants with different molecular weight were prepared via atom transfer radical polymerization technique. The molecular weight determination of polystyrene was conducted by gel permeation chromatography (GPC) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry techniques. The results showed that, when the molecular weight distribution is low (Mw/Mn < 1.2), the measurement by GPC and MALDI-ToF MS provided nearly similar results. For example, the molecular weight of 10600 Da was obtained by MALDI-ToF MS, while GPC gave 10500 g/mol (Mw/Mn = 1.17). However, if the polymer is poly distributed, MALDI-ToF MS cannot provide an accurate value. This was exemplified for a polymer with a molecular weight of 3130 Da measured by MALDI-TOF MS, while GPC showed 2300 g/mol (Mw/Mn = 1.38). The size, size distribution and magnetic properties of the hybrid particles were different by changing either the molecular weight or concentration of the polymer surfactants. The analysis from TEM characterization showed that the size of cobalt nanoparticles stabilized with polystyrene of lower molecular weight (Mn = 2300 g/mol) varied from 12–22 nm, while the size with middle (Mn = 4500 g/mol) and higher molecular weight (Mn = 10500 g/mol) of polystyrene-coated cobalt nanoparticles showed little change. Magnetic measurements exhibited that the small cobalt particles (12 nm) were superparamagnetic, while larger particles (21 nm) were ferromagnetic and assembled into 1-D chains. The grafting density calculated from thermogravimetric analysis showed that a higher grafting density of polystyrene was obtained with lower molecular weight (Mn = 2300 g/mol) than those with higher molecular weight (Mn = 10500 g/mol). Due to the larger steric hindrance, polystyrene with higher molecular weight cannot form a dense shell on the surface of the nanoparticles, which resulted in a lower grafting density. Wide angle X-ray scattering measurements revealed the epsilon cobalt crystalline phases of both superparamagnetic Co NPs coated with polystyrene (Mn = 2300 g/mol) and ferromagnetic Co NPs coated with polystyrene (Mn = 10500 g/mol). Furthermore, a stability study showed that PS-Co NPs prepared with higher polymer concentration and polymer molecular weight exhibited a better stability. N2 - Im Rahmen dieser Arbeit wurden superparamagnetische Cobalt Nanopartikel (NP) synthetisiert, die Selbstassemblierung im Magnetfeld untersucht und die ursprünglichen Liganden Ölsäure (Englisch oleic acid, OA) und Trioctylphosphanoxid (TOPO) ersetzt, um eine Funktionalisierung der Nanopartikel mit einem Temperatur-responsiven Polymer zu erreichen. Außerdem wurden superparamagnetische und ferromagnetische Co NP mit Polystyrol als Stabilisator synthetisiert. Co NP haben aufgrund ihrer herausragenden magnetischen und katalytischen Eigenschaften viele potentielle Anwendungen beispielsweise als Ferrofluide, in der Katalyse und der Magnetresonanztomografie (Englisch magnetic resonance imaging, MRI). Besonders interessant sind dabei superparamagnetische Co NP, die in einem äußeren Magnetfeld magnetisiert werden, aber nach Entfernen des angelegten Magnetfelds keine Magnetisierung mehr aufweisen. Bei biomedizinischen Anwendungen aggregieren sie daher nicht im Körper. Hydrophobe Co NP, die von kleinen Molekülen stabilisiert werden, eignen sich nicht für biologische Anwendungen, für die ein hydrophiles oder wässriges Medium vonnöten ist. Kapitel 3 beschreibt einen Ligandenaustausch zur Funktionalisierung von Co Nanopartikeln und das Herstellen neuer Nanokomposite aus superparamagnetischen Co NP und Temperatur-responsivem PNIPAM. Zunächst wurden wohldefinierte superparamagnetische Co NP mit OA und TOPO als Stabilisatoren durch die Thermolyse von Cobalt Carbonyl synthetisiert. Die ursprünglichen Liganden wurden dann durch einen funktionalen Liganden mit einer Amingruppe (zum Binden an die Oberfläche) und einer 2 Brompropionat-Gruppe (Polymerisationsinitiator) ersetzt. Nach diesem schnellen und einfachen Prozess der Oberflächenfunktionalisierung können die Nanopartikel ohne Aggregation in dem polaren Lösungsmittel DMF dispergiert werden. Nach thermogravimetrischen Messungen konnte die Dichte der Initiatoren mit ungefähr 3,2 Initiatoren / nm2 berechnet werden. Anschließend wurde Oberflächen-initiierte ATRP zur Polymerisation von NIPAM durchgeführt. Temperatur-abhängige Messungen der dynamischen Lichtstreuung der nun in Wasser dispergierbaren Nanokomposite zeigte das reversible Aggregationsverhalten nach Erhitzen über 32 °C. Kapitel 4 behandelt die Untersuchung der Assemblierung von superparamagnetischen OA- und TOPO-stabilisierten Co NP im äußeren Magnetfeld sowohl auf festen Oberflächen als auch der Flüssigkeit-Luft Grenzfläche. Durch die anziehende dipolare Wechselwirkung bildeten sich im äußeren Magnetfeld 1-D Ketten. Der Einfluss der Konzentration der Dispersion und der Stärke des Magnetfelds auf die Morphologie der assemblierten Strukturen wurde untersucht. Bei niedrigerer Konzentration der Dispersion und geringerer Magnetfeldstärke bildeten sich kurze und flexible Ketten. Bei höherer Konzentration oder höherer Magnetfeldstärke wurden die Ketten länger, breiter und gerader. Andererseits sind die induzierten magnetischen Momente bei erhöhter Magnetfeldstärke größer und dominieren über die thermische Fluktuation. Daher verbinden sich die kurzen Ketten zu längeren, und dickere Ketten entstehen durch Interaktion benachbarter Ketten. Außerdem zeigen die induzierten Momente der NP verstärkt in die gleiche Richtung je größer das äußere Magnetfeld ist, weshalb die Ketten gerader werden. Im Vergleich der Assemblierung auf Substraten (TEM-Grids, Siliciumwafer), an der Wasser-Luft und Ethylenglycol-Luft Grenzfläche, zeigte die Assemblierung von Co NP aus Hexan-Dispersion an der Ethylenglycol-Luft Grenzfläche die geordnetsten und homogensten Strukturen. Kapitel 5 präsentierte die Synthese von superparamagnetischen und ferromagnetischen Cobalt Nanopartikeln durch die zwei-stufige Thermolyse von Cobalt Carbonyl (Co2(CO)8) mit Polystyrol als Stabilisator. Polystyrol Polymere mit Amin-Endgruppen wurden durch ATRP-Technik mit unterschiedlichen Molekulargewichten hergestellt. Die Größe, Größenverteilung und magnetischen Eigenschaften der hybriden Partikel haben sich mit dem Molekulargewicht und der Konzentration der Polymer-Stabilisatoren unterschieden. Eine Analyse mit Transmissionselektronenmikroskopie zeigte, dass die Größe der Co NP zwischen 12–22 nm variierte, wenn sie durch Polystyrol geringen Molekulargewichts (Mn = 2300 g/mol) stabilisiert wurden, während sich die Größe der Partikel mit Polystyrol mittleren (Mn = 4500 g/mol) und höheren (Mn = 10500 g/mol) Molekulargewichts kaum unterschied. Messungen der magnetischen Eigenschaften zeigten, dass die kleinen Cobalt Partikel (12 nm) superparamagnetisch waren, während größere Partikel (21 nm) ferromagnetisch waren und zu 1-D Ketten assemblierten. Die Dichte der Polymere auf der Oberfläche wurde nach einer thermogravimetrischen Analyse berechnet. Mit kleinem Molekulargewicht (Mn = 2300 g/mol) wurde eine höhere Dichte erreicht als mit hohem Molekulargewicht (Mn = 10500 g/mol). Durch eine stärker ausgeprägte sterische Hinderung kann ein Polymer hohen Molekulargewichts keine dichte Hülle um die Nanopartikel bilden. Das Vorliegen einer epsilon kristallinen Phase wurde durch Weitwinkel-Röntgenstreuung sowohl für superparamagnetische Co NP (mit PS Mn = 2300 g/mol) als auch ferromagnetische Co NP (mit PS Mn = 10500 g/mol) bestimmt. KW - magnetic nanoparticles KW - assembly KW - polymer KW - cobalt nanoparticles KW - magnetische Nanopartikel KW - Assemblierung KW - Polymer KW - Cobalt Nanopartikeln Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418153 ER - TY - THES A1 - Münzberg, Marvin T1 - Inline-Untersuchung der Trübung und Partikelgröße von hochkonzentrierten Dispersionen mit Lichtstreutechniken Y1 - 2018 ER - TY - THES A1 - Lama, Sandy M. G. T1 - Functionalization of Porous Carbon Materials with Heteroatoms and Application as Supports in Industrial Heterogeneous Catalysis T1 - Funktionalisierung von porösen Kohlenstoffmaterialien mit Heteroatomen und Anwendung als Träger in der industriellen heterogenen Katalyse N2 - Due to a challenging population growth and environmental changes, a need for new routes to provide required chemicals for human necessities arises. An effective solution discussed in this thesis is industrial heterogeneous catalysis. The development of an advanced industrial heterogeneous catalyst is investigated herein by considering porous carbon nano-material as supports and modifying their surface chemistry structure with heteroatoms. Such modifications showed a significant influence on the performance of the catalyst and provided a deeper insight regarding the interaction between the surface structure of the catalyst and the surrounding phase. This thesis contributes to the few present studies about heteroatoms effect on the catalyst performance and emphasizes on the importance of understanding surface structure functionalization in a catalyst in different phases (liquid and gaseous) and for different reactions (hydrogenolysis, oxidation, and hydrogenation/ polymerization). Herein, the heteroatoms utilized for the modifications are hydrogen (H), oxygen (O), and nitrogen (N). The heteroatoms effect on the metal particle size, on the polarity of the support/ the catalyst, on the catalytic performance (activity, selectivity, and stability), and on the interaction with the surrounding phase has been explored. First hierarchical porous carbon nanomaterials functionalized with heteroatoms (N) is synthesized and applied as supports for nickel nanoparticles for hydrogenolysis process of kraft lignin in liquid phase. This reaction has been performed in batch and flow reactors for three different catalysts, two of comparable hierarchical porosity, yet one is modified with N and the other is not, and a third is a prepared catalyst from a commercial carbon support. The reaction production and analyses show that the catalysts with hierarchical porosity perform catalytically much better than in presence of a commercial carbon support with lower surface area. Moreover, the modification with N-heteroatoms enhanced the catalytic performance because the heteroatom modified porous carbon material with nickel nanoparticles catalyst (Ni-NDC) performed highest among the other catalysts. In the flow reactor, Ni-NDC selectively degraded the ether bonds (β-O-4) in kraft lignin with an activity of 2.2 x10^-4 mg lignin mg Ni-1 s-1 for 50 h at 350°C and 3.5 mL min-1 flow, providing ~99 % conversion to shorter chained chemicals (mainly guaiacol derivatives). Then, the functionalization of carbon surface was further studied in selective oxidation of glucose to gluconic acid using < 1 wt. % of gold (Au) deposited on the previously-mentioned synthesized carbon (C) supports with different functionalities (Au-CGlucose, Au-CGlucose-H, Au-CGlucose-O, Au-CGlucoseamine). Except for Au-CGlucose-O, the other catalysts achieved full glucose conversion within 40-120 min and 100% selectivity towards gluconic acid with a maximum activity of 1.5 molGlucose molAu-1 s-1 in an aqueous phase at 45 °C and pH 9. Each heteroatom influenced the polarity of the carbon differently, affecting by that the deposition of Au on the support and thus the activity of the catalyst and its selectivity. The heteroatom effect was further investigated in a gas phase. The Fischer-Tropsch reaction was applied to convert synthetic gas (CO and H2) to short olefins and paraffins using surface-functionalized carbon nanotubes (CNTs) with heteroatoms as supports for ion (Fe) deposition in presence and absence of promoters (Na and S). The results showed the promoted Fe-CNT doped with nitrogen catalyst to be stable up to 180 h and selective to the formation of olefins (~ 47 %) and paraffins (~6 %) with a conversion of CO ~ 92 % at a maximum activity of 94 *10^-5 mol CO g Fe-1 s-1. The more information given regarding this topic can open wide range of applications not only in catalysis, but in other approaches as well. In conclusion, incorporation of heteroatoms can be the next approach for an advanced industrial heterogeneous catalyst, but also for other applications (e.g. electrocatalysis, gas adsorption, or supercapacitors). N2 - Herausforderungen wie Bevölkerungszuwachs und Umweltveränderungen erfordern neue Wege, chemische Substanzen zu erzeugen, um menschliche Anforderungen zu befriedigen. Eine mögliche effektive Lösung dafür, welche in dieser Arbeit diskutiert wird ist die industrielle heterogene Katalyse. Es werden unter dem Einsatz poröser Kohlenstoffträger neue industrielle Katalysatoren untersucht und entwickelt wobei die Oberflächenstruktur dieser Trägermaterialien mit Heteroatomen modifiziert wird. Diese Modifikationen zeigten einen signifikanten Einfluss auf die Eigenschaften der Katalysatoren und erlaubten Rückschlüsse hinsichtlich der Interaktion zwischen Katalysatoroberfläche und umgebender Phase. Die vorliegende Arbeit trägt zu einigen wenigen existierenden Studien bei die sich mit den Einflüssen solcher Heteroatome auf Katalysatoren beschäftigen. Es wird versucht, die Wichtigkeit dieser Oberflächeneigenschaften in Reaktionen (Hydrogenolyse, Oxidation, Hydrierung/ Polymerisation) in verschiedenen Phasen (flüssig oder gasförmig) zu verstehen. Die für die Modifikationen eingesetzten Heteroatome sind Wasserstoff (H), Sauerstoff (O) und Stickstoff (N). Ihr Effekt auf die Größe der Metallpartikel, die Polarität der Träger bzw. Katalysatoren, die eigentlichen katalytischen Eigenschaften und die Interaktion mit der umgebenden Phase wurde untersucht. Zuerst wurden hierarchisch poröse Kohlenstoffmaterialien hergestellt, die mit Stickstoff als Heteroatome funktionalisiert wurden. Diese wurden als Trägermaterialien für Nickel-Nanopartikel in der Hydrogenolyse von Kraft Lignin in flüssiger Phase eingesetzt. Diese Reaktion wurde mit drei unterschiedlichen Katalysatoren in Batch- und Flussreaktoren durchgeführt. Zwei der Katalysatoren hatten vergleichbare hierarchische Porosität. Einer davon war mit Heteroatomen funktionalisiert, einer dagegen nicht. Ein dritter Katalysator wurde mit einem kommerziell erhältlichen Kohlenstoffmaterial hergestellt. Die Reaktion zeigte, dass die Katalysatoren mit hierarchischer Porosität deutlich bessere Eigenschaften zeigen als das kommerzielle Trägermaterial mit geringerer Oberfläche. Darüber hinaus zeigte sich, dass die Modifizierung mit Stickstoffatomen die katalytischen Eigenschaften verbessert, da das modifizierte Kohlenstoffmaterial mit den Nickelpartikeln (Ni-NDC) die besten Ergebnisse aller untersuchten Katalysatoren zeigte. Im Durchflussreaktor wurden von Ni-NDC die Etherbindungen des Kraft Lignins (β-O-4) selektiv mit einer Aktivität von 2.2 x10^-4 mg lignin mg Ni-1 s-1 für 50 h bei 99% Umsatz zu kurzkettigeren Strukturen (hauptsächlich Guajakol-Derivat) gespalten. Außerdem wurde der Einfluss der Funktionalisierung der Kohlenstoffoberfläche in der selektiven Oxidation von Glucose zu Gluconsäure mit 1 Gew.% Gold (Au) auf den vorher angesprochenen Kohlenstoffträgermaterialien mit unterschiedlichen Oberflächenfunktionalitäten (Au-CGlucose, Au-CGlucose-H, Au-CGlucose-O, Au-CGlucoseamine) untersucht. Mit Ausnahme von Au-CGlucose-O erreichten alle Katalysatoren innerhalb von 40-120 min 100% Glucose Umsatz bei 100%iger Selektivität zu Gluconsäure und einer maximalen katalytischen Aktivität von 1.5 molGlucose molAu-1 s-1 in wässriger Phase bei 45°C und pH 9. Die unterschiedlichen Heteroatome wirkten sich unterschiedlich auf die Polarität der Kohlenstoffe und damit auch auf die Abscheidung der Goldpartikel auf die Trägermaterialien und die Katalysatoraktivität und -selektivität aus. Der Einfluss der Heteroatome wurde außerdem in einer Gasphasenreaktion untersucht. Die Fischer-Tropsch Reaktion kam zum Einsatz um Synthesegas (CO und H2) mit Hilfe von Katalysatoren bestehend aus Eisen (Fe) auf Heteroatomfunktionalisierten Kohlenstoffnanoröhrchen (engl. Carbon nanotubes, CNTs) in Gegenwart und Abwesenheit von Promotoren (Na und S) zu kurzkettigen Olefinen und Paraffinen umzuwandeln. Die Ergebnisse zeigten dass die Fe-CNT Katalysatoren mit Promotoren und stickstoffdotierten Trägern bis zu 180 h stabil waren und Olefine (~ 47 %) sowie Paraffine (~6 %) mit guten Selektivitäten bei einem CO Umsatz von 92% und einer maximalen Aktivität von 94 *10^-5 mol CO gFe-1 s-1 hergestellt werden konnten. Je mehr Informationen zu diesem Thema zur Verfügung gestellt werden, kann dies zu einer großen Bandbreite von Anwendungen nicht nur in der Katalyse, sondern auch in anderen Ansätzen beitragen. Zusammenfassend kann der Einbau von Heteroatomen der nächste Ansatz für einen fortgeschrittenen industriellen heterogenen Katalysator sein, aber auch für andere Anwendungen (z.B. Elektrokatalyse, Gasadsorption oder Superkondensatoren). KW - catalysis KW - carbon material KW - carbon supports KW - glucose oxidation KW - Kraft lignin hydrogenolysis KW - Fischer-Tropsch Synthesis KW - Syngas Hydrogenation KW - gold-carbon catalysts KW - nickel-carbon catalysts KW - iron-carbon nanotube catalysts KW - hierarchical porosity KW - heteroatom modification KW - catalyst functionalization KW - Katalyse KW - Kohlenstoffmaterial KW - Kohlenstoffträger KW - Glukoseoxidation KW - Kraftlignin KW - Hydrogenolyse KW - Fischer-Tropsch-Synthese KW - Syngashydrierung KW - Gold-Kohlenstoff-Katalysatoren KW - Nickel-Kohlenstoff-Katalysatoren KW - Eisen-Kohlenstoff-Nanoröhrchen-Katalysatoren KW - hierarchische Porosität KW - Heteroatom-Modifikation KW - Funktionalisierung von Katalysatoren Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-415797 ER - TY - THES A1 - Lee, Hui-Chun T1 - Toward ultimate control of polymerization and catalytic property T1 - In Richtung ultimative Kontrolle der Polymerisation und der katalytischen Eigenschaft BT - a combination of metal-organic frameworks and ATRP BT - eine Kombination von Metall-organischen Gerüsten und ATRP N2 - Reversible-deactivation radical polymerization (RDRP) is without any doubt one of the most prevalent and powerful strategies for polymer synthesis, by which well-defined living polymers with targeted molecular weight (MW), low molar dispersity (Ɖ) and diverse morphologies can be prepared in a controlled fashion. Atom transfer radical polymerization (ATRP) as one of the most extensive studied types of RDRP has been particularly emphasized due to the high accessibility to hybrid materials, multifunctional copolymers and diverse end group functionalities via commercially available precursors. However, due to catalyst-induced side reactions and chain-chain coupling termination in bulk environment, synthesis of high MW polymers with uniform chain length (low Ɖ) and highly-preserved chain-end fidelity is usually challenging. Besides, owing to the inherited radical nature, the control of microstructure, namely tacticity control, is another laborious task. Considering the applied catalysts, the utilization of large amounts of non-reusable transition metal ions which lead to cumbersome purification process, product contamination and complicated reaction procedures all delimit the scope ATRP techniques. Metal-organic frameworks (MOFs) are an emerging type of porous materials combing the properties of both organic polymers and inorganic crystals, characterized with well-defined crystalline framework, high specific surface area, tunable porous structure and versatile nanochannel functionalities. These promising properties of MOFs have thoroughly revolutionized academic research and applications in tremendous aspects, including gas processing, sensing, photoluminescence, catalysis and compartmentalized polymerization. Through functionalization, the microenvironment of MOF nanochannel can be precisely devised and tailored with specified functional groups for individual host-guest interactions. Furthermore, properties of high transition metal density, accessible catalytic sites and crystalline particles all indicate MOFs as prominent heterogeneous catalysts which open a new avenue towards unprecedented catalytic performance. Although beneficial properties in catalysis, high agglomeration and poor dispersibility restrain the potential catalytic capacity to certain degree. Due to thriving development of MOF sciences, fundamental polymer science is undergoing a significant transformation, and the advanced polymerization strategy can eventually refine the intrinsic drawbacks of MOF solids reversely. Therefore, in the present thesis, a combination of low-dimensional polymers with crystalline MOFs is demonstrated as a robust and comprehensive approach to gain the bilateral advantages from polymers (flexibility, dispersibility) and MOFs (stability, crystallinity). The utilization of MOFs for in-situ polymerizations and catalytic purposes can be realized to synthesize intriguing polymers in a facile and universal process to expand the applicability of conventional ATRP methodology. On the other hand, through the formation of MOF/polymer composites by surface functionalization, the MOF particles with environment-adjustable dispersibility and high catalytic property can be as-prepared. In the present thesis, an approach via combination of confined porous textures from MOFs and controlled radical polymerization is proposed to advance synthetic polymer chemistry. Zn2(bdc)2(dabco) (Znbdc) and the initiator-functionalized Zn MOFs, ZnBrbdc, are utilized as a reaction environment for in-situ polymerization of various size-dependent methacrylate monomers (i.e. methyl, ethyl, benzyl and isobornyl methacrylate) through (surface-initiated) activators regenerated by electron transfer (ARGET/SI-ARGET) ATRP, resulting in polymers with control over dispersity, end functionalities and tacticity with respect to distinct molecular size. While the functionalized MOFs are applied, due to the strengthened compartmentalization effect, the accommodated polymers with molecular weight up to 392,000 can be achieved. Moreover, a significant improvement in end-group fidelity and stereocontrol can be observed. The results highlight a combination of MOFs and ATRP is a promising and universal methodology to synthesize versatile well-defined polymers with high molecular weight, increment in isotactic trial and the preserved chain-end functionality. More than being a host only, MOFs can act as heterogeneous catalysts for metal-catalyzed polymerizations. A Cu(II)-based MOF, Cu2(bdc)2(dabco), is demonstrated as a heterogeneous, universal catalyst for both thermal or visible light-triggered ARGET ATRP with expanded monomer range. The accessible catalytic metal sites enable the Cu(II) MOF to polymerize various monomers, including benzyl methacrylate (BzMA), styrene, methyl methacrylate (MMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA) in the fashion of ARGET ATRP. Furthermore, due to the robust frameworks, surpassing the conventional homogeneous catalyst, the Cu(II) MOF can tolerate strongly coordinating monomers and polymerize challenging monomers (i.e. 4-vinyl pyridine, 2-vinyl pyridine and isoprene), in a well-controlled fashion. Therefore, a synthetic procedure can be significantly simplified, and catalyst-resulted chelation can be avoided as well. Like other heterogeneous catalysts, the Cu(II) MOF catalytic complexes can be easily collected by centrifugation and recycled for an arbitrary amount of times. The Cu(II) MOF, composed of photostimulable metal sites, is further used to catalyze controlled photopolymerization under visible light and requires no external photoinitiator, dye sensitizer or ligand. A simple light trigger allows the photoreduction of Cu(II) to the active Cu(I) state, enabling controlled polymerization in the form of ARGET ATRP. More than polymerization application, the synergic effect between MOF frameworks and incorporated nucleophilic monomers/molecules is also observed, where the formation of associating complexes is able to adjust the photochemical and electrochemical properties of the Cu(II) MOF, altering the band gap and light harvesting behavior. Owing to the tunable photoabsorption property resulting from the coordinating guests, photoinduced Reversible-deactivation radical polymerization (PRDRP) can be achieved to further simplify and fasten the polymerization. More than the adjustable photoabsorption ability, the synergistic strategy via a combination of controlled/living polymerization technique and crystalline MOFs can be again evidenced as demonstrated in the MOF-based heterogeneous catalysts with enhanced dispersibility in solution. Through introducing hollow pollen pivots with surface immobilized environment-responsive polymer, PDMAEMA, highly dispersed MOF nanocrystals can be prepared after associating on polymer brushes via the intrinsic amine functionality in each DMAEMA monomer. Intriguingly, the pollen-PDMAEMA composite can serve as a “smart” anchor to trap nanoMOF particles with improved dispersibility, and thus to significantly enhance liquid-phase photocatalytic performance. Furthermore, the catalytic activity can be switched on and off via stimulable coil-to-globule transition of the PDMAEMA chains exposing or burying MOF catalytic sites, respectively. N2 - Die sogenannte „Reversible-Deactivation Radical Polymerization (RDRP)“ ist eine der am häufigsten genutzten und leistungsstärksten Methoden für die Polymersynthese, mit Hilfe derer genau definierte Polymere mit gezieltem Molekulargewicht (MW), niedriger molarer Dispersität (Ɖ) und verschiedenen Morphologien hergestellt werden können. Die sogenannte „Atom Transfer Radical Polymerization (ATRP) ist eine der am intensivsten untersuchten RDRP Methoden, da sie eine hohe Zugänglichkeit zu Hybridmaterialien, multifunktionellen Copolymeren und diversen Endgruppenfunktionalitäten ermöglicht. Jedoch ist die Synthese von Polymeren mit hohem Molekulargewicht, niedriger Dispersität, exakten Endgruppen und der Steuerung der Taktizität für gewöhnlich schwierig. Außerdem führt die Verwendung von großen Mengen an nichtwiederverwendbaren Übergangsmetallionen zu einem umständlichen Reinigungsprozess, wobei Produktverunreinigungen und komplizierte Reaktionsverfahren die Anwendungsbereiche der ATRP Techniken weiter begrenzen. “Metal-organic frameworks (MOFs)“ sind eine vielversprechende Art von porösen Materialien, die die Eigenschaften von organischen Polymeren und anorganischen Kristallen in sich vereinen und sich durch ein kristallines Gerüst, hohe spezifische Oberflächen, einstellbare poröse Strukturen und vielseitige Nanokanal-Funktionalitäten auszeichnen. Diese vielversprechenden Eigenschaften von MOFs haben die akademische Forschung und ihre Anwendung vielseitig revolutioniert, einschließlich der Photolumineszenz, Katalyse und kompartimentierter Polymerisation. Durch gezielte Funktionalisierung kann die Mikroumgebung von MOF-Nanokanälen mit spezifischen funktionellen Gruppen für individuelle Schlüssel-Schloss-Wechselwirkungen präzise entworfen und maßgeschneidert werden. Darüber hinaus weist die hohe Übergangsmetalldichte, zugängliche katalytische Zentren und die kristallinen Partikel auf MOFs als herausragende heterogene Katalysatoren hin, welche eine vielversprechende Möglichkeit für zukünftige Anwendungen erlauben. Ungeachtet der vorteilhaften Eigenschaften in der Katalyse halten eine hohe Agglomerationstendenz und die schlechte Dispergierbarkeit die potentiellen katalytischen Vorteile bis zu einem gewissen Grad zurück. In der vorliegenden Arbeit wurde eine Kombination von niederdimensionalen Polymeren mit kristallinen MOFs als robuster und umfassender Ansatz zur Erzielung der bilateralen Vorteile von Polymeren (Flexibilität, Dispergierbarkeit) und MOFs (Stabilität, Kristallinität) gezeigt. Die Verwendung von MOFs für in-situ-Polymerisationen und katalytische Zwecke kann realisiert werden, um verblüffende Polymere in einem einfachen und universellen Prozess zu synthetisieren, um die Anwendbarkeit herkömmlicher ATRP Methoden zu erweitern. MOFs können nicht nur als Gerüst dienen, sondern auch selbst als heterogene Katalysatoren für metall-katalysierte Polymerisationen, bedingt durch thermische Behandlung oder sichtbares Licht, fungieren. Auf der anderen Seite können MOF / Polymer-Komposite durch Oberflächenfunktionalisierung hergestellt werden, welche sich schließlich durch einstellbare Dispergierbarkeit und guter katalytischer Eigenschaften auszeichnen. KW - metal organic framework KW - controlled polymerization KW - environmental response KW - liquid-phase catalysis KW - confined polymerization KW - ATRP KW - visible light photocatalysis KW - metallorganischen Gerüstverbindungen KW - kontrollierte Polymerisation KW - Umweltreaktion KW - Flüssigphasenkatalyse KW - begrenzte Polymerisation KW - ATRP KW - sichtbares Licht Photokatalyse Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-414973 ER - TY - BOOK A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Einstieg in die Physikalische Chemie für Naturwissenschaftler T3 - Studienbücher Chemie Lehrbuch N2 - Mit einer ausgewogenen Stoffauswahl aus den Teilgebieten Chemische Thermodynamik, Reaktionskinetik und Elektrochemie wird der Leser an das Studium der Physikalischen Chemie herangeführt. Das Verständnis der Theorie wird durch zahlreiche Aufgabenstellungen und die Angabe ihrer Lösungswege erleichtert. Das Buch gibt dem Studenten darüber hinaus Anregungen für ausgewählte Experimente zu den behandelten Teilgebieten, mit denen sich ein Grundverständnis physikalisch-chemischer Zusammenhänge entwickeln lässt. Y1 - 2018 SN - 978-3-662-55857-7 PB - Springer CY - Berlin ET - 6 ER - TY - THES A1 - Nizardo, Noverra Mardhatillah T1 - Thermoresponsive block copolymers with UCST-behavior aimed at biomedical environments T1 - Thermoresponsive Blockcopolymere mit UCST-Verhalten unter biomedizinisch relevanten Bedingungen N2 - Thermoresponsive block copolymers of presumably highly biocompatible character exhibiting upper critical solution temperature (UCST) type phase behavior were developed. In particular, these polymers were designed to exhibit UCST-type cloud points (Tcp) in physiological saline solution (9 g/L) within the physiologically interesting window of 30-50°C. Further, their use as carrier for controlled release purposes was explored. Polyzwitterion-based block copolymers were synthesized by atom transfer radical polymerization (ATRP) via a macroinitiator approach with varied molar masses and co-monomer contents. These block copolymers can self-assemble in the amphiphilic state to form micelles, when the thermoresponsive block experiences a coil-to-globule transition upon cooling. Poly(ethylene glycol) methyl ether (mPEG) was used as the permanently hydrophilic block to stabilize the colloids formed, and polyzwitterions as the thermoresponsive block to promote the temperature-triggered assembly-disassembly of the micellear aggregates at low temperature. Three zwitterionic monomers were used for this studies, namely 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate (SPE), 4-((2-(methacryloyl- oxy)ethyl)dimethylammonio)butane-1-sulfonate (SBE), and 3-((2-(methacryloyloxy)ethyl)- dimethylammonio)propane-1-sulfate) (ZPE). Their (co)polymers were characterized with respect to their molecular structure by proton nuclear magnetic resonance (1H-NMR) and gel permeation chromatography (GPC). Their phase behaviors in pure water as well as in physiological saline were studied by turbidimetry and dynamic light scattering (DLS). These (co)polymers are thermoresponsive with UCST-type phase behavior in aqueous solution. Their phase transition temperatures depend strongly on the molar masses and the incorporation of co-monomers: phase transition temperatures increased with increasing molar masses and content of poorly water-soluble co-monomer. In addition, the presence of salt influenced the phase transition dramatically. The phase transition temperature decreased with increasing salt content in the solution. While the PSPE homopolymers show a phase transition only in pure water, the PZPE homopolymers are able to exhibit a phase transition only in high salinity, as in physiological saline. Although both polyzwitterions have similar chemical structures that differ only in the anionic group (sulfonate group in SPE and sulfate group in ZPE), the water solubility is very different. Therefore, the phase transition temperatures of targeted block copolymers were modulated by using statistical copolymer of SPE and ZPE as thermoresponsive block, and varying the ratio of SPE to ZPE. Indeed, the statistical copolymers of P(SPE-co-ZPE) show phase transitions both in pure water as well as in physiological saline. Surprisingly, it was found that mPEG-b-PSBE block copolymer can display “schizophrenic” behavior in pure water, with the UCST-type cloud point occurring at lower temperature than the LCST-type one. The block copolymer, which satisfied best the boundary conditions, is block copolymer mPEG114-b-P(SPE43-co-ZPE39) with a cloud point of 45°C in physiological saline. Therefore, it was chosen for solubilization studies of several solvatochromic dyes as models of active agents, using the thermoresponsive block copolymer as “smart” carrier. The uptake and release of the dyes were explored by UV-Vis and fluorescence spectroscopy, following the shift of the wavelength of the absorbance or emission maxima at low and high temperature. These are representative for the loaded and released state, respectively. However, no UCST-transition triggered uptake and release of these dyes could be observed. Possibly, the poor affinity of the polybetaines to the dyes in aqueous environtments may be related to the widely reported antifouling properties of zwitterionic polymers. N2 - Neue thermisch-responsive Blockcopolymere mit vermutlich hoher biokompatibilität wurden entwickelt, die ein Phasenverhalten mit oberer kritischer Lösungstemperatur (UCST) in wässriger zeigen. Insbesondere wurden diese Polymere so gestaltet, dass sie Trübungspunkte des UCST-Übergangs (Tcp) in physiologischer Kochsalzlösung (9 g/l) innerhalb des physiologischen interessanten Temperaturfensters von 30-50°C zeigen. Außerdem wurde ihre Eignung als Träger für kontrollierte Freisetzungszwecke untersucht. Diese Polyzwitterionen-basierte Blockcopolymere wurden durch „Atom transfer radikal polymerisation“ (ATRP) unter Verwendung eines Makroinitiators mit verschiedenen Molmassen und Anteilen von Comonomeren dargestellt. Diese Blockcopolymere können sich im amphiphilen Zustand zu Mizellen selbstorganisieren, wenn der thermisch-responsive Block beim Abkühlen einen Übergang vom Knäulen zur Kügel erfährt. Poly (ethylenglycol) methylether (mPEG) wurde als permanent hydrophiler Blockverwendet, der die gebildeten Kolloide stabilisiert, und Polyzwitterionen als thermisch-responsiver Block, der bei niedriger Temperatur die temperaturinduzierte Bildung von Mizellen bewirkt. Drei zwitterionische Monomere wurden für diese Untersuchungen verwendet, 3-((2-(meth- acryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate (SPE), 4-((2-(methacryloyloxy)- ethyl)dimethylammonio)butane-1-sulfonate (SBE), und 3-((2-(methacryloyloxy)ethyl) dimethylammonio)propane-1-sulfate) (ZPE). Die (Co)Polymere wurden durch protonen-kernmagnetische Resonanz (1H-NMR) und Gelpermeationschromatographie (GPC) charakterisiert. Ihr Phasenübergangsverhalten im Wasser sowie in physiologischer Kochsalzlösung wurde durch Trübheitsmessungen und dynamische Lichtstreuung (DLS) untersucht. Diese (Co)Polymere sind thermisch-responsiv mit einem UCST-Übergang als Phasenverhalten in wässriger Lösung. Die Übergangstemperaturen hängen stark von den Molmassen und von dem Anteil der Co-Monomeren ab: Eine Vergrößerung der Molmasse und des Anteils an schwerwasserlöslichem Comonomer führt zu einer Erhöhung der Phasenübergangstemperaturen. Des Weiteren beeinflusst ein Salzzusatz den Phasenübergang sehr stark. Während die PSPE-Homopolymere nur in Wasser einen Phasenübergang aufweisen, zeigen die PZPE-Homopolymere nur bei hohem Salzgehalt, wie in physiologischer Kochsalzlösung, einen Phasenübergang. Obwohl beide Polyzwitterionen ähnliche chemische Strukturen besitzen und sich nur in der anionischen Gruppe (Sulfonatgruppe in SPE und Sulfatgruppe in ZPE) unterscheiden, ist die Wasserlöslichkeit sehr verschieden. Daher wurden die Phasenübergangstemperaturen der Blockcopolymere durch Verwendung von statistischen Copolymeren aus SPE und ZPE als thermisch-responsivem Block mittels des Verhältnisses von SPE zu ZPE moduliert. Solche statistischen Copolymere P(SPE-co-ZPE) zeigen Phasenübergänge sowohl in Wasser als auch in physiologischer Kochsalzlösung. Darüber hinaus wurde überraschenderweise gefunden, dass PSBE-basierte Blockcopolymer z. T. "schizophrenes" Verhalten in Wasser besitzen, wobei der Trübungspunkt des UCST-Übergangs niedriger als der des LCST-Übergangs liegt. Das Blockcopolymer mPEG114-b-P(SPE43-co-ZPE39) erfüllte am besten die Zielsetzung mit einem Trübungspunkt von 45°C in physiologischer Kochsalzlösung. Deswegen wurde es für Solubilisierungsexperimente verschiedener solvatochromer Farbstoffe als Modelle von Wirkstoffen ausgewählt, wobei die Eignung des thermisch-responsiven Blockcopolymers als "intelligenter" Träger untersucht wurde. Die Aufnahme und Freisetzung der Farbstoffe wurden durch UV-Vis- und Fluoreszenzspektroskopie anhand der Verschiebung der Wellenlänge der Extinktions- oder Emissionsmaxima bei niedriger und hoher Temperatur verfolgt. Diese Temperaturen entsprechen dem aggregierten bzw. gelösten Zustand des Polymeren. Jedoch wurde keine Aufnahme und Freisetzung dieser Farbstoffe durch UCST-Übergang beobachtet. Möglicherweise hängt die schwache Affinität der Polybetaine zu den Farbstoffen in wässrigen Systemen mit den bekannten Antifouling-Eigenschaften von zwitterionischen Polymeren zusammen. KW - block copolymer KW - thermoresponsive KW - polyzwitterion KW - upper critical solution temperature KW - self-assembly KW - Blockcopolymer KW - thermoresponsiv KW - Polyzwitterion KW - obere kritische Lösetemperatur KW - Selbstorganisation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-412217 ER - TY - THES A1 - Chaleawlert-Umpon, Saowaluk T1 - Sustainable electrode materials based on lignin T1 - Ligninbasierte nachhaltige Elektrodenmaterialien N2 - The utilization of lignin as renewable electrode material for electrochemical energy storage is a sustainable approach for future batteries and supercapacitors. The composite electrode was fabricated from Kraft lignin and conductive carbon and the charge storage contribution was determined in terms of electrical double layer (EDL) and redox reactions. The important factors at play for achieving high faradaic charge storage capacity contribute to high surface area, accessibility of redox sites in lignin and their interaction with conductive additives. A thinner layer of lignin covering the high surface area of carbon facilitates the electron transfer process with a shorter pathway from the active sites of nonconductive lignin to the current collector leading to the improvement of faradaic charge storage capacity. Composite electrodes from lignin and carbon would be even more sustainable if the fluorinated binder can be omitted. A new route to fabricate a binder-free composite electrode from Kraft lignin and high surface area carbon has been proposed by crosslinking lignin with glyoxal. A high molecular weight of lignin is obtained to enhance both electroactivity and binder capability in composite electrodes. The order of the processing step of crosslinking lignin on the composite electrode plays a crucial role in achieving a stable electrode and high charge storage capacity. The crosslinked lignin based electrodes are promising since they allow for more stable, sustainable, halogen-free and environmentally benign devices for energy storage applications. Furthermore, improvement of the amount of redox active groups (quinone groups) in lignin is useful to enhance the capacity in lithium battery applications. Direct oxidative demethylation by cerium ammonium nitrate has been carried out under mild conditions. This proves that an increase of quinone groups is able to enhance the performance of lithium battery. Thus, lignin is a promising material and could be a good candidate for application in sustainable energy storage devices. N2 - Die Verwendung von Lignin als erneuerbares Ausgangsmaterial für Elektroden ist ein nachhaltiger Ansatz für die Herstellung der nächsten Generation von Batterien und Superkondensatoren. In dieser Arbeit werden Verbundelektroden auf der Basis von Kraft-Lignin und leitfähigem Kohlenstoff hergestellt und getestet. Die Beiträge des Aufbaus einer elektrischen Doppelschicht (EDL) und der Redoxreaktionen zur Kapazität der Elektrode werden diskutiert. Die wichtigsten Faktoren um eine hohe faradaysche Kapazität der aktiven Gruppen in Lignin zu erreichen sind eine große Oberfläche, die Zugänglichkeit der redoxaktiven Gruppen, sowie die Wechselwirkung mit leitfähigen Additiven. Dabei verringert eine dünnere Ligninschicht auf der Oberfläche des leitfähigen Kohlenstoffs den Elektronentransportweg zwischen den redoxaktiven Gruppen und dem Stromabnehmer und wirkt sich somit positiv auf die faradaysche Kapazität aus. Traditionelle Verbundelektroden enthalten in der Regel fluorierte Bindemittel, was deren Nachhaltigkeit in Frage stellt. Die Verwendung von Glyoxal als Quervernetzer für Lignin stellt eine Alternative zur Herstellung von bindemittelfreien ligninbasierten Verbundelektroden dar. Durch die Quervernetzung wird Lignin mit hohem Molekulargewicht erhalten, was sich insbesondere vorteilhaft auf die Stabilität der Elektroden auswirkt. Für das Erreichen einer hohen Kapazität spielt allerdings die Reihenfolge der Produktionsschritte eine entscheidende Rolle, was hier auch diskutiert wird. Eine Erhöhung der Anzahl an redoxativen Gruppen, insbesondere Chinon-Funktionalitäten, im Lignin führt darüber hinaus zur Erhöhung der Kapazität in primären Lithiumbatterien. Die direkte oxidative Demethylierung von Phenylethern mit Hilfe von Cerammoniumnitrat wurde in dieser Arbeit unter milden Reaktionsbedingungen durchgeführt und die verbesserte Kapazität in Lithiumbatterien aufgrund der erhöhten Anzahl an redoxaktiven Gruppen aufgezeigt. Abschließend kann Lignin, quervernetzt oder oxidiert, als vielversprechender Wegbereiter für nachhaltige Materialen in der Energiespeicherung angesehen werden. KW - lignin KW - energy storage KW - sustainable energy storage materials KW - Lignin KW - Energiespeicher KW - nachhaltige Energiespeichermaterialien Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-411793 ER - TY - THES A1 - Chen, Guoxiang T1 - Nanoparticles at solid interfaces N2 - Nanoparticles (NPs) are particles between 1 and 100 nanometers in size. They have attracted enormous research interests owing to their remarkable physicochemical properties and potential applications in the optics, catalysis, sensing, electronics, or optical devices. The thesis investigates systems of NPs attached to planar substrates. In the first part of the results section of the thesis a new method is presented to immobilize NPs. In many NP applications a strong, persistent adhesion to substrates is a key requirement. Up to now this has been achieved with various methods, which are not always the optimum regarding adhesion strength or applicability. We propose a new method which uses capillarity to enhance the binding agents in the contact area between NP and substrate. The adhesion strength resulting from the new approach is investigated in detail and it is shown that the new approach is superior to older methods in several ways. The following section presents the optical visualization of nano-sized objects through a combination of thin film surface distortion and interference enhanced optical reflection microscopy. It is a new, fast and non-destructive technique. It not only reveals the location of NPs as small as 20nm attached to planar surfaces and embedded in a molecularly thin liquid film. It also allows the measurement of the geometry of the surface distortion of the liquid film. Even for small NPs the meniscus reaches out for micrometers, which is the reason why the NPs produce such a pronounced optical footprint. The nucleation and growth of individual bubbles is presented in chapter 5. Nucleation is a ubiquitous natural phenomenon and of great importance in numerous industrial processes. Typically it occurs on very small scales (nanometers) and it is of a random nature (thermodynamics of small systems). Up to now most experimental nucleation studies deal with a large number of individual nucleation processes to cope with its inherently statistical, spatio-temporal character. In contrast, in this thesis the individual O2-bubble formation from single localized platinum NP active site is studied experimentally. The bubble formation is initiated by the catalytic reaction of H2O2 on the Pt surface. It is studied how the bubble nucleation and growth depends on the NP size, the H2O2 concentration and the substrate surface properties. It is observed that in some cases the bubbles move laterally over the substrate surface, driven by the O2-production and the film ablation. KW - Nanoparticles, Adhesion, Interfaces, Bubble, Imaging Y1 - 2018 ER - TY - THES A1 - Li, Lina T1 - Preparation of novel photoactive materials T1 - Herstellung von neuen photoaktiven Materialien BT - different pre-compositions, post-modifications and improved performance BT - verschiedene Vorzusammensetzungen, Post-Modifikationen und verbesserte Leistung N2 - Photocatalysis is considered significant in this new energy era, because the inexhaustibly abundant, clean, and safe energy of the sun can be harnessed for sustainable, nonhazardous, and economically development of our society. In the research of photocatalysis, the current focus was held by the design and modification of photocatalyst. As one of the most promising photocatalysts, g-C3N4 has gained considerable attention for its eye-catching properties. It has been extensively explored in photocatalysis applications, such as water splitting, organic pollutant degradation, and CO2 reduction. Even so, it also has its own drawbacks which inhibit its further application. Inspired by that, this thesis will mainly present and discuss the process and achievement on the preparation of some novel photocatalysts and their photocatalysis performance. These materials were all synthesized via the alteration of classic g-C3N4 preparation method, like using different pre-compositions for initial supramolecular complex and functional group post-modification. By taking place of cyanuric acid, 2,5-Dihydroxy-1,4-benzoquinone and chloranilic acid can form completely new supramolecular complex with melamine. After heating, the resulting products of the two complex shown 2D sheet-like and 1D fiber-like morphologies, respectively, which maintain at even up to high temperature of 800 °C. These materials cover crystals, polymers and N-doped carbons with the increase of synthesis temperature. Based on their different pre-compositions, they show different dye degradation performances. For CLA-M-250, it shows the highest photocatalytic activity and strong oxidation capacity. It shows not only great photo-performance in RhB degradation, but also oxygen production in water splitting. In the post-modification method, a novel photocatalysis solution was proposed to modify carbon nitride scaffold with cyano group, whose content can be well controlled by the input of sodium thiocyanate. The cyanation modification leads to narrowed band gap as well as improved photo-induced charges separation. Cyano group grafted carbon nitride thus shows dramatically enhanced performance in the photocatalytic coupling reaction between styrene and sodium benzenesulfinate under green light irradiation, which is in stark contrast with the inactivity of pristine g-C3N4. N2 - Die Sonne stellt eine Quelle für unerschöpfliche, saubere und sichere Energie dar, die für eine nachhaltige, ungefährliche und ökonomische Entwicklung unserer Gesellschaft genutzt werden kann, daher wird Photokatalyse heutzutage als äußerst vielversprechend angesehen. Bei der Erforschung der Photokatalyse lag der Fokus auf dem Design und der Modifizierung von Photokatalysatoren. Als einer der vielversprechendsten Photokatalysatoren hat sich g-C3N4 erwiesen. Es wurde ausführlich für Anwendungen wie z.B. Wasserspaltung, den Abbau organischer Schadstoffe und CO2-Reduktion untersucht. Trotzdem hat es auch Nachteile, die eine weitere Anwendung erschweren. Deshalb wird in dieser Arbeit hauptsächlich die Herstellung und Eigenschaften von neuartigen auf auf g-C3N4 basierenden Photokatalysatoren vorgestellt und diskutiert. Diese Materialien wurden mittels Verfahren hergestellt, bei denen die klassische g-C3N4-Herstellungsmethode geändert wurde, wie z.B. durch die Verwendung unterschiedlicher Zusammensetzungen und durch die Modifizierung von funktionellen Gruppen. Im Vergleich zu g-C3N4 weisen diese neu hergestellten Materialien unterschiedliche photokatalytische Eigenschaften auf. KW - photocatalysis KW - Photokatalyse KW - CN materials KW - CN-Materialien KW - supramolecular KW - Supramolekular KW - post-modification KW - Post-Modifikationen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-410952 ER - TY - THES A1 - Heinke, David T1 - Biokompatible superparamagnetische Nanopartikel BT - Entwicklung von Nanopartikeln für den Einsatz als in-vivo-Diagnostikum insbesondere im Magnetic Particle Imaging N2 - Magnetische Eisenoxidnanopartikel werden bereits seit geraumer Zeit erfolgreich als MRT-Kontrastmittel in der klinischen Bildgebung eingesetzt. Durch Optimierung der magnetischen Eigenschaften der Nanopartikel kann die Aussagekraft von MR-Aufnahmen verbessert und somit der diagnostische Wert einer MR-Anwendung weiter erhöht werden. Neben der Verbesserung bestehender Verfahren wird die bildgebende Diagnostik ebenso durch die Entwicklung neuer Verfahren, wie dem Magnetic Particle Imaging, vorangetrieben. Da hierbei das Messsignal von den magnetischen Nanopartikeln selbst erzeugt wird, birgt das MPI einen enormen Vorteil hinsichtlich der Sensitivität bei gleichzeitig hoher zeitlicher und räumlicher Auflösung. Da es aktuell jedoch keinen kommerziell vertriebenen in vivo-tauglichen MPI-Tracer gibt, besteht ein dringender Bedarf an geeigneten innovativen Tracermaterialien. Daraus resultierte die Motivation dieser Arbeit biokompatible und superparamagnetische Eisenoxidnanopartikel für den Einsatz als in vivo-Diagnostikum insbesondere im Magnetic Particle Imaging zu entwickeln. Auch wenn der Fokus auf der Tracerentwicklung für das MPI lag, wurde ebenso die MR-Performance bewertet, da geeignete Partikel somit alternativ oder zusätzlich als MR-Kontrastmittel mit verbesserten Kontrasteigenschaften eingesetzt werden könnten. Die Synthese der Eisenoxidnanopartikel erfolgte über die partielle Oxidation von gefälltem Eisen(II)-hydroxid und Green Rust sowie eine diffusionskontrollierte Kopräzipitation in einem Hydrogel. Mit der partiellen Oxidation von Eisen(II)-hydroxid und Green Rust konnten erfolgreich biokompatible und über lange Zeit stabile Eisenoxidnanopartikel synthetisiert werden. Zudem wurden geeignete Methoden zur Formulierung und Sterilisierung etabliert, wodurch zahlreiche Voraussetzungen für eine Anwendung als in vivo-Diagnostikum geschaffen wurden. Weiterhin ist auf Grundlage der MPS-Performance eine hervorragende Eignung dieser Partikel als MPI-Tracer zu erwarten, wodurch die Weiterentwicklung der MPI-Technologie maßgeblich vorangetrieben werden könnte. Die Bestimmung der NMR-Relaxivitäten sowie ein initialer in vivo-Versuch zeigten zudem das große Potential der formulierten Nanopartikelsuspensionen als MRT-Kontrastmittel. Die Modifizierung der Partikeloberfläche ermöglicht ferner die Herstellung zielgerichteter Nanopartikel sowie die Markierung von Zellen, wodurch das mögliche Anwendungsspektrum maßgeblich erweitert wurde. Im zweiten Teil wurden Partikel durch eine diffusionskontrollierte Kopräzipitation im Hydrogel, wobei es sich um eine bioinspirierte Modifikation der klassischen Kopräzipitation handelt, synthetisiert, wodurch Partikel mit einer durchschnittlichen Kristallitgröße von 24 nm generiert werden konnten. Die Bestimmung der MPS- und MR-Performance elektrostatisch stabilisierter Partikel ergab vielversprechende Resultate. In Vorbereitung auf die Entwicklung eines in vivo-Diagnostikums wurden die Partikel anschließend erfolgreich sterisch stabilisiert, wodurch der kolloidale Zustand in MilliQ-Wasser über lange Zeit aufrechterhalten werden konnte. Durch Zentrifugation konnten die Partikel zudem erfolgreich in verschiedene Größenfraktionen aufgetrennt werden. Dies ermöglichte die Bestimmung der idealen Aggregatgröße dieses Partikelsystems in Bezug auf die MPS-Performance. N2 - Magnetic nanoparticles have long been successfully implemented in the clinic as contrast agents for magnetic resonance imaging (MRI). Through optimization of the nanoparticles’ magnetic properties, an improvement in the resulting diagnostic images can be achieved, which in turn increases the diagnostic value of the MRI procedure. The advancement of diagnostic imaging is brought about not only through the improvement of established diagnostic techniques, but also through the development of new methodologies such as Magnetic Particle Imaging (MPI). In MPI, the measured signal arises directly from the magnetic particles and, thus, the technique holds great promise in terms of sensitivity and spatial resolution. Since there are currently no commercially available MPI tracers for in vivo use, the development of optimal tracer materials that are biocompatible and, thus, suitable for in vivo application, is becoming increasingly important. Therefore, the aim of this work was to develop biocompatible superparamagnetic iron oxide nanoparticles for application as an in vivo diagnostic agent in particular for MPI. Even though the focus lay on the development of an MPI tracer, the MR performance of the generated magnetic nanoparticles was also addressed, since such particles can be also be used as an MRI contrast agent with improved contrast efficacy. Synthesis of the superparamagnetic iron oxide nanoparticles was performed either via partial oxidation of precipitated iron (II) hydroxide and green rust or through a diffusion-controlled co-precipitation reaction in a hydrogel. The partial oxidation synthetic route gave rise to biocompatible and colloidally stable iron oxide nanoparticles. Furthermore, suitable methods for the formulation and sterilization of these particles were developed, enabling many of the prerequisites for successful in vivo application to be addressed. The resulting outstanding magnetic particle spectra (MPS) performance of the synthesized nanoparticles enables their suitability as an effective MPI tracer, assisting the advancement of the MPI technology. Moreover, the MR relaxivity values of the particles as well as results obtained from a preliminary in vivo MRI experiment revealed the high potential of the formulated nanoparticle suspensions for application as MRI contrast agents. In addition, chemical modification of the particle surface was performed, which enables the fabrication of target-specific nanoparticles as well as magnetic labeling of certain cell types e.g. stem cells. Nanoparticle synthesis via a diffusion-controlled co-precipitation strategy in a hydrogel, which is a bioinspired modification of the classical co-precipitation reaction, resulted in particles with a mean crystal diameter of 24 nm. Measurement of the MPS and MR performances of such electrostatically-stabilized particles revealed promising results. So as to promote the development of these particles for use as in vivo diagnostic agents, the particles were sterically stabilized and were found to be colloidally stable on the long-term in aqueous solution. Through centrifugation, the particles were successfully separated in batches of varying mean particle sizes, allowing for the determination of the ideal size of this particle system in terms of the MPS performance. KW - Magnetic Particle Imaging KW - Magnetresonanztomograpgie KW - magnetic resonance imaging KW - Eisenoxidnanopartikel Y1 - 2018 SN - 978-3-945954-45-4 PB - Infinite Science Publishing CY - Lübeck ER - TY - THES A1 - Rumschöttel, Jens T1 - Charakterisierung von DNA-Polyplexen mit verzweigten reinen und Maltose modifizierten Poly(ethyleniminen) sowie Polyplexen mit Goldnanopartikeln Y1 - 2018 ER -