TY - JOUR A1 - Wischerhoff, Erik A1 - Badi, Nezha A1 - Lutz, Jean-Francois A1 - Laschewsky, André T1 - Smart bioactive surfaces N2 - The purpose of this highlight is to define the emerging field of bioactive surfaces. In recent years, various types of synthetic materials capable of "communicating'' with biological objects such as nucleic acids, proteins, polysaccharides, viruses, bacteria or living cells have been described in the literature. This novel area of research certainly goes beyond the traditional field of smart materials and includes different types of sophisticated interactions with biological entities, such as reversible adhesion, conformational control, biologically-triggered release and selective permeation. These novel materials may be 2D planar surfaces as well as colloidal objects or 3D scaffolds. Overall, they show great promise for numerous applications in biosciences and biotechnology. For instance, practical applications of bioactive surfaces in the fields of bioseparation, cell engineering, biochips and stem-cell differentiation are briefly discussed herein. Y1 - 2010 UR - http://www.rsc.org/Publishing/Journals/sm/index.asp U6 - https://doi.org/10.1039/B913594d SN - 1744-683X ER - TY - JOUR A1 - Wischerhoff, Erik A1 - Badi, Nezha A1 - Laschewsky, André A1 - Lutz, Jean-Francois ED - Börner, Hans Gerhard ED - Lutz, JF T1 - Smart polymer surfaces concepts and applications in biosciences JF - Advances in polymer science = Fortschritte der Hochpolymeren-Forschung JF - Advances in Polymer Science N2 - Stimuli-responsive macromolecules (i.e., pH-, thermo-, photo-, chemo-, and bioresponsive polymers) have gained exponential importance in materials science, nanotechnology, and biotechnology during the last two decades. This chapter describes the usefulness of this class of polymer for preparing smart surfaces (e.g., modified planar surfaces, particles surfaces, and surfaces of three-dimensional scaffolds). Some efficient pathways for connecting these macromolecules to inorganic, polymer, or biological substrates are described. In addition, some emerging bioapplications of smart polymer surfaces (e.g., antifouling surfaces, cell engineering, protein chromatography, tissue engineering, biochips, and bioassays) are critically discussed. KW - Antifouling surfaces KW - Bioactive surfaces KW - Biocompatible polymers KW - Bioseparation KW - Cell engineering KW - Polymer-modified surfaces KW - Stimuli-responsive polymers Y1 - 2011 SN - 978-3-642-20154-7 U6 - https://doi.org/10.1007/12_2010_88 SN - 0065-3195 VL - 240 IS - 1 SP - 1 EP - 33 PB - Springer CY - Berlin ER - TY - JOUR A1 - Weiss, Jan A1 - Wienk, Hans A1 - Boelens, Rolf A1 - Laschewsky, André T1 - Block copolymer micelles with an intermediate star-/flower-like structure studied by H-1 NMR relaxometry JF - Macromolecular chemistry and physics N2 - H-1 NMR relaxation is used to study the self-assembly of a double thermoresponsive diblock copolymer in dilute aqueous solution. Above the first transition temperature, at which aggregation into micellar structures is observed, the trimethylsilyl (TMS)-labeled end group attached to the shell-forming block shows a biphasic T-2 relaxation. The slow contribution reflects the TMS groups located at the periphery of the hydrophilic shell, in agreement with a star-like micelle. The fast T-2 contribution corresponds to the TMS groups, which fold back toward the hydrophobic core, reflecting a flower-like micelle. These results confirm the formation of block copolymer micelles of an intermediate nature (i.e., of partial flower-like and star-like character), in which a part of the TMS end groups folds back to the core due to hydrophobic interactions. KW - block copolymers KW - polymer micelles KW - relaxation NMR spectroscopy KW - self-assembly KW - thermoresponsive materials Y1 - 2014 U6 - https://doi.org/10.1002/macp.201300753 SN - 1022-1352 SN - 1521-3935 VL - 215 IS - 9 SP - 915 EP - 919 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Weiss, Jan A1 - Li, Ang A1 - Wischerhoff, Erik A1 - Laschewsky, André T1 - Water-soluble random and alternating copolymers of styrene monomers with adjustable lower critical solution temperature JF - Polymer Chemistry N2 - Random copolymers of 4-vinylbenzyl tri(oxyethylene) and tetra(oxyethylene) ethers, as well as alternating copolymers of 4-vinylbenzyl methoxytetra(oxyethylene) ether and a series of N-substituted maleimides, were synthesised by conventional free radical polymerisation, reversible addition fragmentation chain transfer (RAFT) and atom transfer radical polymerisation (ATRP). Their thermosensitive behaviour in aqueous solution was studied by turbidimetry and dynamic light scattering. Depending on the copolymer composition, a LCST type phase transition was observed in water. The transition temperature of the obtained random as well as alternating copolymers could be varied within a broad temperature window. In the case of the random copolymers, transition temperatures could be easily fine-tuned, as they showed a linear dependence on the copolymer composition, and were additionally modified by the nature of the polymer end-groups. Alternating copolymers were extremely versatile for implementing a broad range of variations of the phase transition temperatures. Further, while alternating copolymers derived from 4-vinylbenzyl methoxytetra(oxyethylene) ether and maleimides with small hydrophobic side chains underwent macroscopic phase separation when dissolved in water and heated above their cloud point, the incorporation of maleimides bearing larger hydrophobic substituents resulted in the formation of mesoglobules above the phase transition temperature, with hydrodynamic diameters of less than 100 nm. Y1 - 2012 U6 - https://doi.org/10.1039/c1py00422k SN - 1759-9954 VL - 3 IS - 2 SP - 352 EP - 361 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Weiss, Jan A1 - Laschewsky, André T1 - One-step synthesis of amphiphilic, double thermoresponsive diblock copolymers JF - Macromolecules : a publication of the American Chemical Society N2 - The copolymerization of an excess of a functionalized styrene monomer, 4-vinylbenzyl methoxytetrakis(oxyethylene) ether, with various N-substituted maleimides yields tapered diblock copolymers in a one-step procedure, when applying reversible deactivation radical polymerization (RDRP) methods, such as ATRP and RAFT. The particular chemical structure of the diblock copolymers prepared results in reversible temperature-responsive two-step aggregation behavior in dilute aqueous solution. In this way, a double hydrophilic block copolymer is transformed step by step into an amphiphilic macrosurfactant, and finally into a double hydrophobic copolymer, as followed by turbidimetry and dynamic light scattering. Copolymers in which the maleimide repeat units bear short hydrophobic side chains are freely water-soluble at low temperature and form micellar aggregates above their cloud point. Further heating above the phase transition temperature of the second block results in secondary aggregation. Copolymers with maleimides that bear strongly hydrophobic substituents undergo two thermally induced aggregation steps upon heating, too, but show in addition intramolecular hydrophobic association in water already at low temperatures, similar to the behavior of polysoaps. Y1 - 2012 U6 - https://doi.org/10.1021/ma300285y SN - 0024-9297 VL - 45 IS - 10 SP - 4158 EP - 4165 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weiss, Jan A1 - Laschewsky, André T1 - Temperature-induced self-assembly of triple-responsive triblock copolymers in aqueous solutions JF - Langmuir N2 - A series of triple-thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (PNPAM, A), poly(methoxydiethylene glycol acrylate) (PMDEGA, B), and poly(N-ethylacrylamide) (PNEAM, C) was synthesized by sequential reversible addition-fragmentation chain transfer polymerizations. Polymers of differing block sequences, ABC, BAC, and ACB, with increasing phase transition temperatures in the order A < B < C were prepared. Their aggregation behavior in dilute aqueous solution was investigated using dynamic light scattering, turbidimetry, and NMR spectroscopy. The self-organization of such polymers was found to dependent strongly on the block sequence. While polymers with a terminal low-LCST (lower critical solution temperature) block undergo aggregation above the first phase transition temperature at 20-25 degrees C, triblock copolymers with the low-LCST block in the middle show aggregation only above the second phase transition. The collapse of the middle block is not sufficient to induce aggregation but produces instead stable, unimolecular micelles with a collapsed middle block, as supported by NMR and fluorescence probe data. Continued heating of all copolymers led to two additional thermal transitions at 40-55 and 70-80 degrees C, which could be correlated to the phase transitions of the B and C blocks, respectively. All polymers show a high tendency for cluster formation, once aggregation is induced. The carrier abilities of the triple responsive triblock copolymers for hydrophobic agents were probed with the solvatochromic fluorescence dye Nile Red. With passing through the first thermal transition, the block copolymers are capable of solubilizing Nile Red. In the case of block copolymers with sequences ABC or ACB, which bear the low-LCST block at one terminus, notable amounts of dye are solubilized already at this stage. In contrast, the hydrophobic probe is much less efficiently incorporated by the BAC triblock copolymer, which forms unimolecular micelles. Only after the collapse of the B block, when reaching the second phase transition at about 45 degrees C, does aggregation occur and solubilization becomes efficient. In the case of ABC and ACB polymers, the hydrophobic probe seems to partition between the originally collapsed A chains and the additional hydrophobic chains formed after the collapse of the less hydrophobic B block. Y1 - 2011 U6 - https://doi.org/10.1021/la200115p SN - 0743-7463 VL - 27 IS - 8 SP - 4465 EP - 4473 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weiss, Jan A1 - Böttcher, Christoph A1 - Laschewsky, André T1 - Self-assembly of double thermoresponsive block copolymers end-capped with complementary trimethylsilyl groups JF - Soft matter N2 - A set of double thermoresponsive diblock copolymers poly(N-n-propylacrylamide)-block-poly(N-ethylacrylamide) (PNPAM-b-PNEAM) was synthesised by sequential reversible addition-fragmentation chain transfer (RAFT) polymerisations. Using a twofold trimethylsilyl (TMS)-labeled RAFT-agent, the relative size of the two blocks was varied. While soluble as unimers below 15 degrees C, all copolymers exhibited thermally induced two-step self-assembly in water, due to distinct lower critical solution temperature (LCST) phase transitions of PNPAM (around 20 degrees C) and PNEAM (around 70 degrees C). Their temperature-dependent self-organisation in dilute aqueous solution was studied by turbidimetry, dynamic light scattering, transmission electron microscopy, and (1)H NMR spectroscopy. The copolymers show distinct, two-step self-organisation behaviour with respect to transition temperatures, aggregate type and size, which can be correlated to the relative lengths of the low and high LCST blocks. For polymers having short blocks with low LCST, the first thermal transition induces the formation of individual micelles. Further heating above the second thermal transition results reversibly either in a shrink of the micelle size or in aggregation of the micelles, with hydrodynamic diameters below 250 nm. In contrast in the case of polymers having a long block with low LCST, the first thermal transition already leads to clusters of micelles, while the second thermal transition makes the clusters shrink. Noteworthy, the twofold TMS-labeled end groups report not only on the molar masses of the polymers, but can simultaneously serve as NMR-probes for the self-assembly process. The signal of the TMS-aryl end group displays a reversible temperature dependent, two-step splitting that is indicative of the self-organisation of the block copolymers. Y1 - 2011 U6 - https://doi.org/10.1039/c0sm00531b SN - 1744-683X VL - 7 IS - 2 SP - 483 EP - 492 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wattebled, Laurent A1 - Laschewsky, André A1 - Moussa, Alain A1 - Habib-Jiwan, Jean-Louis T1 - Aggregation numbers of cationic oligomeric surfactants : A time-resolved fluorescence quenching study N2 - The micelle aggregation numbers (N-agg) of several series of cationic oligomeric surfactants were determined by time-resolved fluorescence quenching (TRFQ) experiments, using advantageously 9,10-dimethylanthracene as fluorophore. The study comprises six dimeric ("gemini"), three trimeric, and two tetrameric surfactants, which are quaternary ammonium chlorides, with medium length spacer groups (C-3-C-6) separating the individual surfactant fragments. Two standard cationic surfactants served as references. The number of hydrophobic chains making up a micellar core is relatively low for the oligomeric surfactants, the spacer length playing an important role. For the dimers, the number decreases from 32 to 21 with increasing spacer length. These numbers decrease further with increasing degree of oligomerization down to values of about 15. As for many conventional ionic surfactants, the micelles of all oligomers studied grow only slightly with the concentration, and they remain in the regime of small micelles up to concentrations of at least 3 wt %. Y1 - 2006 UR - http://pubs.acs.org/doi/full/10.1021/la052414h U6 - https://doi.org/10.1021/La052414h ER - TY - JOUR A1 - Wang, Weijia A1 - Kaune, Gunar A1 - Perlich, Jan A1 - Paradakis, Christine M. A1 - Bivigou Koumba, Achille Mayelle A1 - Laschewsky, André A1 - Schlage, K. A1 - Röhlsberger, Ralf A1 - Roth, Stephan V. A1 - Cubitt, Robert A1 - Müller-Buschbaum, Peter T1 - Swelling and switching kinetics of gold coated end-capped poly(N-isopropylacrylamide) thin films N2 - Thin thermoresponsive hydrogel films of poly(N-isopropylacrylamide) end-capped with n-butyltrithiocarbonate(nbc- PNIPAM) oil si I icon supports with a gold layer on top, causing an asymmetric confinement, are investigated. For two different gold layer thicknesses (nominally 0.4 and 5 rim), the swelling and switching kinetics are probed with in situ neutron reflectivity. With a temperature jump from 23 to 40 degrees C the film is switched from a swollen into a collapsed state. For the thin gold layer this switching is faster as compared to the thick gold layer. The switching is a two-step process of water release and a subsequent structural relaxation. fit swelling and deswelling cycles, aging of the films is probed. After five cycles, the film exhibits enhanced water storage capacity. Grazing-incidence small-angle X-ray scattering (GISAXS) shows that these gold coated nbc-PNIPAM films do not age with respect to the inner structure but slightly roughen at the gold surface. As revealed by atomic force microscopy, the morphology of the gold layer is changed by the water uptake and release. Y1 - 2010 UR - http://pubs.acs.org/journal/mamobx U6 - https://doi.org/10.1021/Ma902637a SN - 0024-9297 ER - TY - JOUR A1 - Wang, Peixi A1 - Geiger, Christina A1 - Kreuzer, Lucas A1 - Widmann, Tobias A1 - Reitenbach, Julija A1 - Liang, Suzhe A1 - Cubitt, Robert A1 - Henschel, Cristiane A1 - Laschewsky, André A1 - Papadakis, Christine M. A1 - Müller-Buschbaum, Peter T1 - Poly(sulfobetaine)-based diblock copolymer thin films in water/acetone atmosphere: modulation of water hydration and co-nonsolvency-triggered film contraction JF - Langmuir : the ACS journal of surfaces and colloids N2 - The water swelling and subsequent solvent exchange including co-nonsolvency behavior of thin films of a doubly thermo-responsive diblock copolymer (DBC) are studied viaspectral reflectance, time-of-flight neutron reflectometry, and Fourier transform infrared spectroscopy. The DBC consists of a thermo-responsive zwitterionic (poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate)) (PSBP) block, featuring an upper critical solution temperature transition in aqueous media but being insoluble in acetone, and a nonionic poly(N-isopropylmethacrylamide) (PNIPMAM) block, featuring a lower critical solution temperature transition in water, while being soluble in acetone. Homogeneous DBC films of 50-100 nm thickness are first swollen in saturated water vapor (H2OorD2O), before they are subjected to a contraction process by exposure to mixed saturated water/acetone vapor (H2OorD2O/acetone-d6 = 9:1 v/v). The affinity of the DBC film toward H2O is stronger than for D2O, as inferred from the higher film thickness in the swollen state and the higher absorbed water content, thus revealing a pronounced isotope sensitivity. During the co-solvent-induced switching by mixed water/acetone vapor, a two-step film contraction is observed, which is attributed to the delayed expulsion of water molecules and uptake of acetone molecules. The swelling kinetics are compared for both mixed vapors (H2O/acetone-d6 and D2O/acetone-d6) and with those of the related homopolymer films. Moreover, the concomitant variations of the local environment around the hydrophilic groups located in the PSBP and PNIPMAM blocks are followed. The first contraction step turns out to be dominated by the behavior of the PSBP block, where as the second one is dominated by the PNIPMAM block. The unusual swelling and contraction behavior of the latter block is attributed to its co-nonsolvency behavior. Furthermore, we observe cooperative hydration effects in the DBC films, that is, both polymer blocks influence each other's solvation behavior. Y1 - 2022 U6 - https://doi.org/10.1021/acs.langmuir.2c00451 SN - 0743-7463 SN - 1520-5827 VL - 38 IS - 22 SP - 6934 EP - 6948 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Vuillaume, Pascal Y. A1 - Jonas, Alain M. A1 - Laschewsky, André T1 - Ordered polyelectrolyte "multilayers" : 5. photo-cross-linking of hybrid films containing a new unsaturated and hydrophobized poly(diallylammonium) salt and exfoliated clay N2 - A simple synthetic route to a new poly(diallylammonium) salt functionalized by a styrene group is presented. This reactive polymer was employed for polyelectrolyte multilayer films using electrostatical layer-by-layer self- assembly, together with an inorganic polyanion, namely an exfoliated hectorite clay. To enhance their stability, the final hybrid multilayers were cross-linked by exposure to UV light, leading only to a minor shrinkage. Alternatively, the reactive polycation was cross-linked after each adsorption step. X-ray reflectometry revealed that the two types of films dispose of an internal order with a short length scale, that seems insensitive to the photo-cross-linking. Cross- linking after each adsorption step, however, results in more regular film growth, and reduces the films? roughness and the amount of polyanion deposited. Under these conditions, the films seem to grow by deposition of submonolayers with a combined vertical and lateral expansion, resulting in the self-healing of previously deposited, incomplete layers. Y1 - 2002 ER - TY - JOUR A1 - von Berlepsch, Hans A1 - Boettcher, Christoph A1 - Skrabania, Katja A1 - Laschewsky, André T1 - Complex domain architecture of multicompartment micelles from a linear ABC triblock copolymer revealed by cryogenic electron tomography N2 - Cryo-electron tomography of raspberry-like multicompartment micelles formed by a linear ABC triblock copolymer in water revealed that the fluorocarbon domains may be dispersed all over the hydrocarbon core. Y1 - 2009 UR - http://xlink.rsc.org/jumptojournal.cfm?journal_code=CC U6 - https://doi.org/10.1039/B903658j SN - 1359-7345 ER - TY - JOUR A1 - Vishnevetskaya, Natalya S. A1 - Hildebrand, Viet A1 - Nizardo, Noverra Mardhatillah A1 - Ko, Chia-Hsin A1 - Di, Zhenyu A1 - Radulescu, Aurel A1 - Barnsley, Lester C. A1 - Müller-Buschbaum, Peter A1 - Laschewsky, André A1 - Papadakis, Christine M. T1 - All-in-One "Schizophrenic" self-assembly of orthogonally tuned thermoresponsive diblock copolymers JF - Langmuir N2 - Smart, fully orthogonal switching was realized in a highly biocompatible diblock copolymer system with variable trigger-induced aqueous self-assembly. The polymers are composed of nonionic and zwitterionic blocks featuring lower and upper critical solution temperatures (LCSTs and UCSTs). In the system investigated, diblock copolymers from poly(N-isopropyl methacrylamide) (PNIPMAM) and a poly(sulfobetaine methacrylamide), systematic variation of the molar mass of the latter block allowed for shifting the UCST of the latter above the LCST of the PNIPMAM block in a salt-free condition. Thus, successive thermal switching results in "schizophrenic" micellization, in which the roles of the hydrophobic core block and the hydrophilic shell block are interchanged depending on the temperature. Furthermore, by virtue of the strong electrolyte-sensitivity of the zwitterionic polysulfobetaine block, we succeeded to shift its UCST below the LCST of the PNIPMAM block by adding small amounts of an electrolyte, thus inverting the pathway of switching. This superimposed orthogonal switching by electrolyte addition enabled us to control the switching scenarios between the two types of micelles (i) via an insoluble state, if the LCST-type cloud point is below the UCST-type cloud point, which is the case at low salt concentrations or (ii) via a molecularly dissolved state, if the LCST-type cloud point is above the UCST-type cloud point, which is the case at high salt concentrations. Systematic variation of the block lengths allowed for verifying the anticipated behavior and identifying the molecular architecture needed. The versatile and tunable self-assembly offers manifold opportunities, for example, for smart emulsifiers or for sophisticated carrier systems. Y1 - 2019 U6 - https://doi.org/10.1021/acs.langmuir.9b00241 SN - 0743-7463 VL - 35 IS - 19 SP - 6441 EP - 6452 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Virtanen, Janne A1 - Arotcarena, Michel A1 - Heise, Bettina A1 - Ishaya, Sultana A1 - Laschewsky, André A1 - Tenhu, Heikki T1 - Dissolution and aggregation of a poly (NIPA-block-sulfobetaine) copolymer in pure and saline aqueous solutions N2 - Thermal properties of block copolymer, poly(N-isopropyl acrylamide)-block-poly(3-[N-(3-methacrylamido-propyl)- N,N-dimethyl]-ammonio propane sulfonate), PNIPA-b-PSPP have been studied in pure and saline (NaCl) aqueous solutions by dynamic laser light scattering (DLS). The copolymer [Mw(PNIPA) 10800 g/mol and Mw(PSPP) 9700 g/mol] exhibits both an upper (UCST 9 oC) and lower (LCST 32 oC) critical solution temperatures in pure water. The addition of NaCl enhances the solubility of the zwitterionic polymer, PSPP, leading to the disappearance of the UCST. On the other hand, the solubility of PNIPA in water decreases as NaCl is added. At 20 oC the copolymer shows a bimodal size distribution through the NaCl concentration range of 0-0.93 M above a certain limiting polymer concentration. The slow and fast components of the diffusion coefficients of the polymer have been calculated. A gradual addition of salt turns the mutual interactions from zwitterionic attractions between PSPP blocks to hydrophobic attractions between PNIPA blocks. The formation of the aggregates and the aggregate sizes at T < UCST and T > LCST are influenced by polymer and salt concentrations. Below UCST the aggregates in saline polymer solutions are larger than those in pure polymer solutions. Above LCST the aggregate size is determined by the salt concentration. Y1 - 2002 ER - TY - JOUR A1 - Uhlig, Katja A1 - Wischerhoff, Erik A1 - Lutz, Jean-Francois A1 - Laschewsky, André A1 - Jäger, Magnus S. A1 - Lankenau, Andreas A1 - Duschl, Claus T1 - Monitoring cell detachment on PEG-based thermoresponsive surfaces using TIRF microscopy N2 - Recently, we introduced a thermoresponsive copolymer that consists of oligo(ethylene glycol) methacrylate (OEGMA) and 2-(2- methoxyethoxy) ethyl methacrylate (MEO(2)MA). The polymer exhibited an LCST at 35 degrees C in PBS buffer and was anchored onto gold substrates using disulfide polymerisation initiators. It allows the noninvasive detachment of adherent cells from their substrate. As the mechanisms that determine the interaction of cells with such polymers are not well understood, we employed Total Internal Reflection Fluorescence (TIRF) microscopy in order to monitor the detachment process of cells of two different types. We identified contact area and average cell-substrate distance as crucial parameters for the evaluation of the detachment process. The sensitivity of TIRF microscopy allowed us to correlate the specific adhesion pattern of MCF-7 breast cancer cells with the morphology of cell deposits that may serve as fingerprints for a nondestructive characterisation of live cells. Y1 - 2010 UR - http://www.rsc.org/Publishing/Journals/sm/index.asp U6 - https://doi.org/10.1039/C0sm00010h SN - 1744-683X ER - TY - GEN A1 - Tsukruk, Vladimir A1 - Mischenko, Nikolay A1 - Köberle, Peter A1 - Laschewsky, André T1 - The structural order of some novel ionic polymers; 2. : Models of molecular packing N2 - The molecular packing and spatial correlations of two isomeric zwitterionic polymethacrylates and one polyacrylate analog are studied by means of X-ray analysis and conformational calculations. The analysis of the correlation functions and density distribution profiles suggest a double-layered molecular packing which is discussed for the three polymers investigated, with respect to their different chemical structures. Whereas the zwitterionic polymethacrylates studied exhibit liquid-like short-range order, the polyacrylate analog exhibits an ordered double-layered superstructure. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 096 Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17256 ER - TY - GEN A1 - Troll, K. A1 - Kulkarni, Amit A1 - Wang, W. A1 - Darko, C. A1 - Koumba, A. M. Bivigou A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - The collapse transition of poly(styrene-b-(N-isopropyl acrylamide)) diblock copolymers in aqueous solution and in thin films T2 - Colloid and polymer science : official journal of the Kolloid-Gesellschaft Y1 - 2011 U6 - https://doi.org/10.1007/s00396-010-2344-1 SN - 0303-402X VL - 289 IS - 2 SP - 227 EP - 227 PB - Springer CY - New York ER - TY - JOUR A1 - Szczubialka, K. A1 - Moczek, Lukasz A1 - Goliszek, A. A1 - Nowakowska, M. A1 - Kotzev, Anton A1 - Laschewsky, André T1 - Characterization of hydrocarbon and fluorocarbon microdomains formed in aqueous solution of associative polymers : a molecular probe technique N2 - Fluorocarbon associative polymers of the polysoap type were studied using two fluorescent probes, 1- octanoylpyrene (OcPyH) and 1-perfluorooctanoylpyrene (OcPyF). In aqueous solution the polymers formed hydrophobic domains composed of hydrocarbon, fluorocarbon or both types of polymeric side chains, which could solubilize the probes. This resulted in the appearance of new fluorescence emission bands and changes in the fluorescence polarization of the probes. The differences in the solubilization properties of the polymers are discussed. (c) 2005 Elsevier B.V. All rights reserved Y1 - 2005 SN - 0022-1139 ER - TY - JOUR A1 - Strehmel, Veronika A1 - Laschewsky, André A1 - Wetzel, Hendrik A1 - Gornitz, Eckhard T1 - Free radical polymerization of n-butyl methacrylate in ionic liquids N2 - Ionic liquids based on imidazolium, pyridinium, and alkylammonium salts were investigated as solvents in free radical polymerization of the model monomer n-butyl methacrylate. The properties of the ionic liquids were systematically varied by changing the length of the alkyl substituents on the cations, and by employing different anions such as tetrafluoroborate, hexafluorophosphate, tosylate, triflate, alkyl sulfates and dimethyl phosphate. Results were compared to analogous polymerizations in toluene and in bulk. The solvents have no detectable influence on polymer tacticity. However, the molar masses obtained and the degree of polymerization, respectively, are very sensitive to the choice of the solvent. The degrees of polymerization are significantly higher when polymerizations were carried out in ionic liquids compared to polymerization in toluene, and can even exceed the values obtained by bulk polymerization. Imidazolium salts unsubstituted at C-2 result in an increase in the degree of polymerization of the poly(butyl methacrylate) with increasing viscosity of these ionic liquids. Methyl substitution at C-2 of the imidazolium ion results in an increase in the viscosity of the ionic liquid and in a viscosity independent degree of polymerization of the poly(butyl methacrylate). Ionic liquids based on imidazolium salts seem preferable over pyridinium and alkylammonium salts because of the higher degree of polymerization of the poly(butyl methacrylate)s obtained in the imidazolium salts. The glass transition temperatures and thermal stabilities are higher for poly(butyl methacrylate)s synthesized in the ionic liquids compared to the polymer made in toluene Y1 - 2006 UR - http://pubs.acs.org/doi/full/10.1021/ma0516945 U6 - https://doi.org/10.1021/Ma0516945 ER - TY - JOUR A1 - Strehmel, Veronika A1 - Laschewsky, André A1 - Wetzel, Hendrik T1 - Homopolymerization of a highly polar zwitterionic methacrylate in ionic liquids and its copolymerization with a non-polar methacrylate N2 - Free radical homo- and copolymerization of the highly polar 3-(N-[2-methacryloyloxyethyl]-N,N-dimethylammonio) propane sulfonate with the nonpolar n-butylmethacrylate was investigated in the ionic liquids 1-butyl-3-methyl imidazolium tetrafluoroborate and 1-butyl-3-methylimidazolium hexafluoro phosphate, and compared to analogous polymerizations in standard solvents. Higher molar masses are obtained for the zwitterionic homopolymer when the polymerization is carried out in an ionic liquid compared to the classical reaction in water. Although homopolymerization of the sulfobetain monomer as well as of n-butylmethacrylate results in phase separation during the polymerization process, copolymerization of a stoichiometric ratio of the two monomers in the ionic liquids produced transparent gels indicating that no macrophase separation occurs. The use of ionic liquids as reaction medium improved the copolymerization behavior of the two methacrylates significantly. Whereas only minor amounts of n-butyl methacrylate were incorporated in the copolymer when synthesized in acetonitrile, the content of the non-polar monomer units in the zwitterionic copolymer approached increasingly its content in the polymerization mixture when ionic liquids were employed as solvents Y1 - 2006 ER -