TY - JOUR A1 - Yarman, Aysu A1 - Schulz, Christopher A1 - Sygmund, Cristoph A1 - Ludwig, Roland A1 - Gorton, Lo A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Third generation ATP sensor with enzymatic analyte recycling JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - For the first time the direct electron transfer of an enzyme - cellobiose dehydrogenase, CDH - has been coupled with the hexokinase catalyzed competition for glucose in a sensor for ATP. To enhance the signal output for ATP, pyruvate kinase was coimmobilized to recycle ADP by the phosphoenolpyruvate driven reaction. The new sensor overcomes the limit of 1:1 stoichiometry of the sequential or competitive conversion of ATP by effective enzymatic recycling of the analyte. The anodic oxidation of the glucose converting CDH proceeds at electrode potentials below 0 mV vs. Ag vertical bar AgCl thus potentially interfering substances like ascorbic acid or catecholamines do not influence the measuring signal. The combination of direct electron transfer of CDH with the enzymatic recycling results in an interference-free and oxygen-independent measurement of ATP in the lower mu molar concentration range with a lower limit of detection of 63.3 nM (S/N=3). KW - ATP KW - Third generation sensor KW - Enzymatic recycling KW - Cellobiose dehydrogenase KW - Hexokinase KW - Pyruvate kinase Y1 - 2014 U6 - https://doi.org/10.1002/elan.201400231 SN - 1040-0397 SN - 1521-4109 VL - 26 IS - 9 SP - 2043 EP - 2048 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Krylov, Andrey V. A1 - Beissenhirtz, Moritz Karl A1 - Adamzig, Holger A1 - Scheller, Frieder W. A1 - Lisdat, Fred T1 - Thick-film electrodes for measurement of superoxide and hydrogen peroxide based on direct protein-electrode contacts N2 - Cytochrome c was immobilized on screen-printed thick-film gold electrodes by a self-assembly approach using mixed monolayers of mercaptoundecanoic acid and mercaptoundecanol. Cyclic voltammetry revealed quasi-reversible electrochemical behavior of the covalently fixed protein with a formal potential of +10 mV vs. Ag/AgCl. Polarized at +150 mV vs. Ag/AgCl the electrode was found to be sensitive to superoxide radicals in the range 300-1200 nmol L-1. Compared with metal needle electrodes sensitivity and reproducibility could be improved and combined with the easiness of preparation. This allows the fabrication of disposable sensors for nanomolar superoxide concentrations. By changing the electrode potential the sensor can be switched from response to superoxide radicals to hydrogen peroxide-another reactive oxygen species. H2O2 sensitivity can be provided in the range 10-1000 mumol L-1 which makes the electrode suitable for oxidative stress studies Y1 - 2004 ER - TY - JOUR A1 - Schulmeister, Thomas A1 - Scheller, Frieder W. T1 - The mathematics of exponential signal amplification in amperometric three enzyme electrodes Y1 - 1996 ER - TY - JOUR A1 - Yarman, Aysu A1 - Scheller, Frieder W. T1 - The first electrochemical MIP sensor for tamoxifen JF - Sensors N2 - We present an electrochemical MIP sensor for tamoxifen (TAM)-a nonsteroidal anti-estrogen-which is based on the electropolymerisation of an O-phenylenediamine. resorcinol mixture directly on the electrode surface in the presence of the template molecule. Up to now only. bulk. MIPs for TAM have been described in literature, which are applied for separation in chromatography columns. Electro-polymerisation of the monomers in the presence of TAM generated a film which completely suppressed the reduction of ferricyanide. Removal of the template gave a markedly increased ferricyanide signal, which was again suppressed after rebinding as expected for filling of the cavities by target binding. The decrease of the ferricyanide peak of the MIP electrode depended linearly on the TAM concentration between 1 and 100 nM. The TAM-imprinted electrode showed a 2.3 times higher recognition of the template molecule itself as compared to its metabolite 4-hydroxytamoxifen and no cross-reactivity with the anticancer drug doxorubucin was found. Measurements at + 1.1 V caused a fouling of the electrode surface, whilst pretreatment of TAM with peroxide in presence of HRP generated an oxidation product which was reducible at 0 mV, thus circumventing the polymer formation and electrochemical interferences. KW - molecularly imprinted polymers KW - anticancer drug KW - tamoxifen KW - electropolymerisation Y1 - 2014 U6 - https://doi.org/10.3390/s140507647 SN - 1424-8220 VL - 14 IS - 5 SP - 7647 EP - 7654 PB - MDPI CY - Basel ER - TY - JOUR A1 - Spricigo, Roberto A1 - Leimkühler, Silke A1 - Gorton, Lo A1 - Scheller, Frieder W. A1 - Wollenberger, Ursula T1 - The Electrically Wired Molybdenum Domain of Human Sulfite Oxidase is Bioelectrocatalytically Active JF - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - We report electron transfer between the catalytic molybdenum cofactor (Moco) domain of human sulfite oxidase (hSO) and electrodes through a poly(vinylpyridine)-bound [osmium(N,N'-methyl-2,2'-biimidazole)(3)](2+/3+) complex as the electron-transfer mediator. The biocatalyst was immobilized in this low-potential redox polymer on a carbon electrode. Upon the addition of sulfite to the immobilized separate Moco domain, the generation of a significant catalytic current demonstrated that the catalytic center is effectively wired and active. The bioelectrocatalytic current of the wired separate catalytic domain reached 25% of the signal of the wired full molybdoheme enzyme hSO, in which the heme b(5) is involved in the electron-transfer pathway. This is the first report on a catalytically active wired molybdenum cofactor domain. The formal potential of this electrochemical mediator is between the potentials of the two cofactors of hSO, and as hSO can occupy several conformations in the polymer matrix, it is imaginable that electron transfer from the catalytic site to the electrode through the osmium center occurs for the hSO molecules in which the Moco domain is sufficiently accessible. The observation of catalytic oxidation currents at low potentials is favorable for applications in bioelectronic devices. KW - Metalloenzymes KW - Enzyme catalysis KW - Immobilization KW - Osmium Y1 - 2015 U6 - https://doi.org/10.1002/ejic.201500034 SN - 1434-1948 SN - 1099-0682 IS - 21 SP - 3526 EP - 3531 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Eremenko, Arkadi V. A1 - Bauer, Christian G. A1 - Makower, Alexander A1 - Kanne, Beate A1 - Baumgarten, Horst A1 - Scheller, Frieder W. T1 - The development of a non-competitive immunoenzymometric Assay (IEMA) of cocaine Y1 - 1998 ER - TY - JOUR A1 - Huang, T. A1 - Warsinke, Axel A1 - Kuwana, T. A1 - Scheller, Frieder W. T1 - The determination of L-phenylalanine based on a novel NADH-detecting biosensor Y1 - 1998 ER - TY - JOUR A1 - Yarman, Aysu A1 - Gröbe, Glenn A1 - Neumann, Bettina A1 - Kinne, Mathias A1 - Gajovic-Eichelmann, Nenad A1 - Wollenberger, Ursula A1 - Hofrichter, Martin A1 - Ullrich, Rene A1 - Scheibner, Katrin A1 - Scheller, Frieder W. T1 - The aromatic peroxygenase from Marasmius rutola-a new enzyme for biosensor applications JF - Analytical & bioanalytical chemistry N2 - The aromatic peroxygenase (APO; EC 1.11.2.1) from the agraric basidomycete Marasmius rotula (MroAPO) immobilized at the chitosan-capped gold-nanoparticle-modified glassy carbon electrode displayed a pair of redox peaks with a midpoint potential of -278.5 mV vs. AgCl/AgCl (1 M KCl) for the Fe(2+)/Fe(3+) redox couple of the heme-thiolate-containing protein. MroAPO oxidizes aromatic substrates such as aniline, p-aminophenol, hydroquinone, resorcinol, catechol, and paracetamol by means of hydrogen peroxide. The substrate spectrum overlaps with those of cytochrome P450s and plant peroxidases which are relevant in environmental analysis and drug monitoring. In M. rotula peroxygenase-based enzyme electrodes, the signal is generated by the reduction of electrode-active reaction products (e.g., p-benzoquinone and p-quinoneimine) with electro-enzymatic recycling of the analyte. In these enzyme electrodes, the signal reflects the conversion of all substrates thus representing an overall parameter in complex media. The performance of these sensors and their further development are discussed. KW - Unspecific peroxygenase KW - Cytochrome P450 KW - Biosensors KW - Phenolic substances Y1 - 2012 U6 - https://doi.org/10.1007/s00216-011-5497-y SN - 1618-2642 VL - 402 IS - 1 SP - 405 EP - 412 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Lisdat, Fred A1 - Scheller, Frieder W. T1 - Technical principles. Electrodes Y1 - 2000 SN - 90-5702-447-7 ER - TY - JOUR A1 - Peng, Lei A1 - Utesch, Tillmann A1 - Yarman, Aysu A1 - Jeoung, Jae-Hun A1 - Steinborn, Silke A1 - Dobbek, Holger A1 - Mroginski, Maria Andrea A1 - Tanne, Johannes A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Surface-Tuned Electron Transfer and Electrocatalysis of Hexameric Tyrosine-Coordinated Heme Protein JF - Chemistry - a European journal N2 - Molecular modeling, electrochemical methods, and quartz crystal microbalance were used to characterize immobilized hexameric tyrosine-coordinated heme protein (HTHP) on bare carbon or on gold electrodes modified with positively and negatively charged self-assembled monolayers (SAMs), respectively. HTHP binds to the positively charged surface but no direct electron transfer (DET) is found due to the long distance of the active sites from the electrode surfaces. At carboxyl-terminated surfaces, the neutrally charged bottom of HTHP can bind to the SAM. For this "disc" orientation all six hemes are close to the electrode and their direct electron transfer should be efficient. HTHP on all negatively charged SAMs showed a quasi-reversible redox behavior with rate constant k(s) values between 0.93 and 2.86 s(-1) and apparent formal potentials E-app(0)' between -131.1 and -249.1 mV. On the MUA/MU-modified electrode, the maximum surface concentration corresponds to a complete monolayer of the hexameric HTHP in the disc orientation. HTHP electrostatically immobilized on negatively charged SAMs shows electrocatalysis of peroxide reduction and enzymatic oxidation of NADH. KW - electrochemistry KW - electron transfer KW - heme proteins KW - molecular modeling KW - monolayers Y1 - 2015 U6 - https://doi.org/10.1002/chem.201405932 SN - 0947-6539 SN - 1521-3765 VL - 21 IS - 20 SP - 7596 EP - 7602 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Chen, Jian A1 - Wollenberger, Ursula A1 - Lisdat, Fred A1 - Ge, Bixia A1 - Scheller, Frieder W. T1 - Superoxide sensor based on hemin modified electrode Y1 - 2000 ER - TY - JOUR A1 - Spricigo, Roberto A1 - Richter, Claudia A1 - Leimkühler, Silke A1 - Gorton, Lo A1 - Scheller, Frieder W. A1 - Wollenberger, Ursula T1 - Sulfite biosensor based on osmium redox polymer wired sulfite oxidase N2 - A biosensor, based on a redoxactive osmium polymer and sulfite oxidase on screen-printed electrodes, is presented here as a promising method for the detection of sulfite. A catalytic oxidative current was generated when a sample containing sulfite was pumped over the carbon screen-printed electrode modified with osmium redox polymer wired sulfite oxidase. A stationary value was reached after approximately 50 s and a complete measurement lasted no more than 3 min. The electrode polarized at -0.1 V (vs. Ag vertical bar AgCl 1M KCl) permits minimizing the influence of interfering substances, since these compounds can be unspecific oxidized at higher potentials. Because of the good stability of the protein film on the electrode surface, a well functioning biosensor-flow system was possible to construct. The working stability and reproducibility were further enhanced by the addition of bovine serum albumin generating a more long-term stable and biocompatible protein environment. The optimized biosensor showed a stable signal for more than a week of operation and a coefficient of variation of 4.8% for 12 successive measurements. The lower limit of detection of the sensor was 0.5 mu M sulfite and the response was linear until 100 mu M. The high sensitivity permitted a 1:500 dilution of wine samples. The immobilization procedure and the operational conditions granted minimized interferences. Additionally, repeating the immobilization procedure to form several layers of wired SO further increased the sensitivity of such a sensor. Finally. the applicability of the developed sulfite biosensor was tested on real samples, such as white and red wines. Y1 - 2010 UR - http://www.sciencedirect.com/science/journal/09277757 U6 - https://doi.org/10.1016/j.colsurfa.2009.09.001 SN - 0927-7757 ER - TY - JOUR A1 - Ehrentreich-Förster, Eva A1 - Shishniashvili, D. A1 - Song, Min Ik A1 - Scheller, Frieder W. T1 - Study of antioxidative substances by means of a ssuperoxide sensor Y1 - 1998 ER - TY - JOUR A1 - Bistolas, Nikitas A1 - Christenson, A. A1 - Ruzgas, T. A1 - Jung, Christiane A1 - Scheller, Frieder W. A1 - Wollenberger, Ursula T1 - Spectroelectrochemistry of cytochrome P450cam N2 - The spectroelectrochemistry of camphor-bound cytochrome P450cam (P450cam) using gold electrodes is described. The electrodes were modified with either 4,4'-dithiodipyridin or sodium dithionite. Electrolysis of P450cam was carried out when the enzyme was in solution, while at the same time UV visible absorption spectra were recorded. Reversible oxidation and reduction could be observed with both 4,4'-dithiodipyridin and dithionite modified electrodes. A formal potential (E-0') of -373 mV vs Ag/AgCl 1 M KCl was determined. The spectra of P450cam complexed with either carbon monoxide or metyrapone, both being inhibitors of P450 catalysis, clearly indicated that the protein retained its native state in the electrochemical cell during electrolysis. (C) 2003 Elsevier Inc. All rights reserved Y1 - 2004 ER - TY - JOUR A1 - Lisdat, Fred A1 - Ge, Bixia A1 - Ehrentreich-Förster, Eva A1 - Reszka, R. A1 - Scheller, Frieder W. T1 - SOD activity measurement using cytochrome c modified electrode Y1 - 1999 ER - TY - JOUR A1 - Yarman, Aysu A1 - Kurbanoğlu, Sevinç A1 - Zebger, Ingo A1 - Scheller, Frieder W. T1 - Simple and robust BT - the claims of protein sensing by molecularly imprinted polymers JF - Sensors and actuators : B, Chemical : an international journal devoted to research and development of chemical transducers N2 - A spectrum of 7562 publications on Molecularly Imprinted Polymers (MIPs) has been presented in literature within the last ten years (Scopus, September 7, 2020). Around 10 % of the papers published on MIPs describe the recognition of proteins. The straightforward synthesis of MIPs is a significant advantage as compared with the preparation of enzymes or antibodies. MIPs have been synthesized from only one up to six functional monomers while proteins are made up of 20 natural amino acids. Furthermore, they can be synthesized against structures of low immunogenicity and allow multi-analyte measurements via multi-target synthesis. Electrochemical methods allow simple polymer synthesis, removal of the template and readout. Among the different sensor configurations electrochemical MIP-sensors provide the broadest spectrum of protein analytes. The sensitivity of MIP-sensors is sufficiently high for biomarkers in the sub-nanomolar region, nevertheless the cross-reactivity of highly abundant proteins in human serum is still a challenge. MIPs for proteins offer innovative tools not only for clinical and environmental analysis, but also for bioimaging, therapy and protein engineering. KW - Molecularly imprinted polymer KW - Plastibodies KW - Functional scaffolds KW - Biomimetic sensors KW - Proteins Y1 - 2021 U6 - https://doi.org/10.1016/j.snb.2020.129369 SN - 0925-4005 SN - 1873-3077 VL - 330 PB - Elsevier Science CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Lisdat, Fred A1 - Ge, Bixia A1 - Meyerhoff, M. E. A1 - Scheller, Frieder W. T1 - Signal chains with cytochromes at SAM modified gold electrodes Y1 - 2001 ER - TY - JOUR A1 - Halámek, Jan A1 - Wollenberger, Ursula A1 - Stöcklein, Walter F. M. A1 - Warsinke, Axel A1 - Scheller, Frieder W. T1 - Signal amplification in immunoassays using labeling via boronic acid binding to the sugar moiety of immunoglobulin G : proof of concept for glycated hemoglobin N2 - A novel electrochemical immunoassay based on the multiple affinity labeling of the indicator antibody with an electro-active tag is presented. The concept is illustrated for the determination of the glycated hemoglobin HbA1c in hemoglobin samples. Hemoglobin is adsorbed to the surfactant-modified surface of a piezoelectric quartz crystal. Whereas the quartz crystal nanobalance is used to validate the total Hb binding, the HbA1c on the sensor surface is recognized by an antibody and quantified electrochemically after the sugar moieties of the antibody have been labeled in-situ with ferroceneboronic acid. The sensitivity of this sensor is about threefold higher than the sensitivity of a hemoglobin sensor, where the ferroceneboronic acid is bound directly to HbA1c. Y1 - 2007 UR - http://www.informaworld.com/openurl?genre=journal&issn=0003-2719 U6 - https://doi.org/10.1080/00032710701327096 SN - 0003-2719 ER - TY - JOUR A1 - Yarman, Aysu A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Sensors based on cytochrome P450 and CYP mimicking systems JF - ELECTROCHIMICA ACTA N2 - Cytochrome P450 enzymes (CYPs) act on more than 90 percent of all drugs currently on the market. The catalytic cycle requires electron supply to the heme iron in the presence of oxygen. Electrochemistry allows to characterise the reaction mechanism of these redox enzymes by observing the electron transfer in real time. According to the number of publications on protein electrochemistry CYP has the third position after glucose oxidase and cytochrome c. CYP based enzyme electrodes for the quantification of drugs, metabolites or pesticides have been developed using different iso-enzymes. A crucial step in the sensor development is the efficiency of coupling the biocatalytic systems with the electrode is. In the 1970s the direct electron transfer of heme and heme peptides called microperoxidases (MPs) was used as model of oxidoreductases. They exhibit a broad substrate spectrum including hydroxylation of selected aromatic substrates, demethylation and epoxidation by means of hydrogen peroxide. It overlaps with that of P450 making heme and MPs to alternate recognition elements in biosensors for the detection of typical CYP substrates. In these enzyme electrodes the signal is generated by the conversion of all substrates thus representing in complex media an overall parameter. By combining the biocatalytic substrate conversion with selective binding to a molecularly imprinted polymer layer the specificity has been improved. Here we discuss different approaches of biosensors based on CYP, microperoxidases and catalytically active MIPs and discuss their potential as recognition elements in biosensors. The performance of these sensors and their further development are discussed. (C) 2013 Elsevier Ltd. All rights reserved. KW - Cytochrome P450 KW - Microperoxidases KW - Catalytically active molecularly imprinted polymers KW - Biosensors KW - Personalised medicine Y1 - 2013 U6 - https://doi.org/10.1016/j.electacta.2013.03.154 SN - 0013-4686 SN - 1873-3859 VL - 110 SP - 63 EP - 72 PB - PERGAMON-ELSEVIER SCIENCE LTD CY - OXFORD ER - TY - JOUR A1 - Stöcklein, Walter F. M. A1 - Rohde, M. A1 - Scharte, Gudrun A1 - Behrsing, Olaf A1 - Warsinke, Axel A1 - Micheel, Burkhard A1 - Scheller, Frieder W. T1 - Sensitive detection of triazine and phenylurea pesticides in pure organic solvent by enzyme linked immunsorbent assay (ELISA): stabilities, solubilities and sensitives Y1 - 2000 ER -