TY - JOUR A1 - Yarman, Aysu A1 - Kurbanoglu, Sevinc A1 - Jetzschmann, Katharina J. A1 - Ozkan, Sibel A. A1 - Wollenberger, Ulla A1 - Scheller, Frieder W. T1 - Electrochemical MIP-Sensors for Drugs JF - Current Medicinal Chemistry N2 - In order to replace bio-macromolecules by stable synthetic materials in separation techniques and bioanalysis biomimetic receptors and catalysts have been developed: Functional monomers are polymerized together with the target analyte and after template removal cavities are formed in the "molecularly imprinted polymer" (MIP) which resemble the active sites of antibodies and enzymes. Starting almost 80 years ago, around 1,100 papers on MIPs were published in 2016. Electropolymerization allows to deposit MIPs directly on voltammetric electrodes or chips for quartz crystal microbalance (QCM) and surface plasmon resonance (SPR). For the readout of MIPs for drugs amperometry, differential pulse voltammetry (DPV) and impedance spectroscopy (EIS) offer higher sensitivity as compared with QCM or SPR. Application of simple electrochemical devices allows both the reproducible preparation of MIP sensors, but also the sensitive signal generation. Electrochemical MIP-sensors for the whole arsenal of drugs, e.g. the most frequently used analgesics, antibiotics and anticancer drugs have been presented in literature and tested under laboratory conditions. These biomimetic sensors typically have measuring ranges covering the lower nano-up to millimolar concentration range and they are stable under extreme pH and in organic solvents like nonaqueous extracts. KW - Biomimetic sensors KW - molecularly imprinted polymers KW - drug sensors KW - drug imprinting KW - electropolymerization KW - electrochemical sensors Y1 - 2018 U6 - https://doi.org/10.2174/0929867324666171005103712 SN - 0929-8673 SN - 1875-533X VL - 25 IS - 33 SP - 4007 EP - 4019 PB - Bentham Science Publishers LTD CY - Sharjah ER - TY - JOUR A1 - Yarman, Aysu A1 - Jetzschmann, Katharina J. A1 - Neumann, Bettina A1 - Zhang, Xiaorong A1 - Wollenberger, Ulla A1 - Cordin, Aude A1 - Haupt, Karsten A1 - Scheller, Frieder W. T1 - Enzymes as Tools in MIP-Sensors JF - Chemosensors N2 - Molecularly imprinted polymers (MIPs) have the potential to complement antibodies in bioanalysis, are more stable under harsh conditions, and are potentially cheaper to produce. However, the affinity and especially the selectivity of MIPs are in general lower than those of their biological pendants. Enzymes are useful tools for the preparation of MIPs for both low and high-molecular weight targets: As a green alternative to the well-established methods of chemical polymerization, enzyme-initiated polymerization has been introduced and the removal of protein templates by proteases has been successfully applied. Furthermore, MIPs have been coupled with enzymes in order to enhance the analytical performance of biomimetic sensors: Enzymes have been used in MIP-sensors as tracers for the generation and amplification of the measuring signal. In addition, enzymatic pretreatment of an analyte can extend the analyte spectrum and eliminate interferences. KW - enzymatic MIP synthesis KW - template digestion KW - enzyme tracer KW - enzymatic analyte conversion KW - molecularly imprinted polymers Y1 - 2017 U6 - https://doi.org/10.3390/chemosensors5020011 SN - 2227-9040 VL - 5 PB - MDPI CY - Basel ER - TY - JOUR A1 - Yarman, Aysu A1 - Gröbe, Glenn A1 - Neumann, Bettina A1 - Kinne, Mathias A1 - Gajovic-Eichelmann, Nenad A1 - Wollenberger, Ursula A1 - Hofrichter, Martin A1 - Ullrich, Rene A1 - Scheibner, Katrin A1 - Scheller, Frieder W. T1 - The aromatic peroxygenase from Marasmius rutola-a new enzyme for biosensor applications JF - Analytical & bioanalytical chemistry N2 - The aromatic peroxygenase (APO; EC 1.11.2.1) from the agraric basidomycete Marasmius rotula (MroAPO) immobilized at the chitosan-capped gold-nanoparticle-modified glassy carbon electrode displayed a pair of redox peaks with a midpoint potential of -278.5 mV vs. AgCl/AgCl (1 M KCl) for the Fe(2+)/Fe(3+) redox couple of the heme-thiolate-containing protein. MroAPO oxidizes aromatic substrates such as aniline, p-aminophenol, hydroquinone, resorcinol, catechol, and paracetamol by means of hydrogen peroxide. The substrate spectrum overlaps with those of cytochrome P450s and plant peroxidases which are relevant in environmental analysis and drug monitoring. In M. rotula peroxygenase-based enzyme electrodes, the signal is generated by the reduction of electrode-active reaction products (e.g., p-benzoquinone and p-quinoneimine) with electro-enzymatic recycling of the analyte. In these enzyme electrodes, the signal reflects the conversion of all substrates thus representing an overall parameter in complex media. The performance of these sensors and their further development are discussed. KW - Unspecific peroxygenase KW - Cytochrome P450 KW - Biosensors KW - Phenolic substances Y1 - 2012 U6 - https://doi.org/10.1007/s00216-011-5497-y SN - 1618-2642 VL - 402 IS - 1 SP - 405 EP - 412 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Yarman, Aysu A1 - Dechtrirat, Decha A1 - Bosserdt, Maria A1 - Jetzschmann, Katharina J. A1 - Gajovic-Eichelmann, Nenad A1 - Scheller, Frieder W. T1 - Cytochrome c-derived hybrid systems based on moleculary imprinted polymers JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - Hybrid architectures which combine a MIP with an immobilized affinity ligand or a biocatalyst sum up the advantages of both components. In this paper, hybrid architectures combining a layer of a molecularly imprinted electropolymer with a mini-enzyme or a self-assembled monolayer will be presented. (i) Microperoxidase-11 (MP-11) catalyzed oxidation of the drug aminopyrine on a product-imprinted sublayer: The peroxide dependent conversion of the analyte aminopyrine takes place in the MP-11 containing layer on top of a product-imprinted electropolymer on the indicator electrode. The hierarchical architecture resulted in the elimination of interfering signals for ascorbic acid and uric acid. An advantage of the new hierarchical structure is the separation of MIP formation by electropolymerization and immobilization of the catalyst. In this way it was for the first time possible to integrate an enzyme with a MIP layer in a sensor configuration. This combination has the potential to be transferred to other enzymes, e.g. P450, opening the way to clinically important analytes. (ii) Epitope-imprinted poly-scopoletin layer for binding of the C-terminal peptide and cytochrome c (Cyt c): The MIP binds both the target peptide and the parent protein almost eight times stronger than the non-imprinted polymer with affinities in the lower micromolar range. Exchange of only one amino acid in the peptide decreases the binding by a factor of five. (iii) MUA-poly-scopoletin MIP for cytochrome c: Cyt c bound to the MIP covered gold electrode exhibits direct electron transfer with a redox potential and rate constant typical for the native protein. The MIP cover layer suppresses the displacement of the target protein by BSA or myoglobin. The combination of protein imprinted polymers with an efficient electron transfer is a new concept for characterizing electroactive proteins such as Cyt c. The competition with other proteins shows that the MIP binds its target Cyt c preferentially and that molecular shape and the charge of protein determine the binding of interfering proteins. KW - Molecularly imprinted polymers KW - Microperoxidase-11 KW - Cytochrome c KW - Catalytically active MIPs KW - Epitope imprinting KW - Monoclonal MIPs Y1 - 2015 U6 - https://doi.org/10.1002/elan.201400592 SN - 1040-0397 SN - 1521-4109 VL - 27 IS - 3 SP - 573 EP - 586 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Yarman, Aysu A1 - Badalyan, Artavazd A1 - Gajovic-Eichelmann, Nenad A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Enzyme electrode for aromatic compounds exploiting the catalytic activities of microperoxidase-11 JF - Biosensors and bioelectronics : the principal international journal devoted to research, design development and application of biosensors and bioelectronics N2 - Microperoxidase-11 (MR-11) which has been immobilised in a matrix of chitosan-embedded gold nanoparticles on the surface of a glassy carbon electrode catalyzes the conversion of aromatic substances. This peroxide-dependent catalysis of microperoxidase has been applied in an enzyme electrode for the first time to indicate aromatic compounds such as aniline. 4-fluoroaniline, catechol and p-aminophenol. The electrode signal is generated by the cathodic reduction of the quinone or quinoneimine which is formed in the presence of both MP-II and peroxide from the substrate. The same sensor principle will be extended to aromatic drugs. KW - Microperoxidase-11 KW - Nanoparticles KW - p-Aminophenol KW - Aniline KW - Catechol KW - 4-Fluoroaniline KW - Biosensors Y1 - 2011 U6 - https://doi.org/10.1016/j.bios.2011.09.004 SN - 0956-5663 VL - 30 IS - 1 SP - 320 EP - 323 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Xie, B. A1 - Tang, X. A1 - Wollenberger, Ursula A1 - Johansson, G. A1 - Gorton, Lo A1 - Scheller, Frieder W. A1 - Danielsson, B. T1 - Hybrid biosensor for simultaneous electrochemical and thermal detection Y1 - 1997 ER - TY - JOUR A1 - Wu, Yunhua A1 - Wollenberger, Ursula A1 - Hofrichter, Martin A1 - Ullrich, Rene A1 - Scheibner, Katrin A1 - Scheller, Frieder W. T1 - Direct electron transfer of Agrocybe aegerita peroxygenase at electrodes modified with chitosan-capped Au nanoparticles and its bioelectrocatalysis to aniline JF - Sensors and actuators : B, Chemical N2 - Three different sizes of chitosan-capped Au nanoparticles were synthesized and were used to incorporate Agrocybe aegerita peroxygenase (AaeAPO) onto the surface of glassy carbon electrode. The direct electron transfer of AaeAPO was achieved in all films. The highest amount of electroactive enzyme and highest electron transfer rate constant k(s) of AaeAPO were obtained in the film with the smallest size of chitosan-capped Au nanoparticles. In anaerobic solutions, quasi-reversible oxidation and reduction are obtained with a formal potential of -0.280V vs. Ag/AgCl 1 M KCl in 100 mM (pH 7.0) PBS at scan rate of 1 V s(-1). Bioelectrocatalytic reduction currents can be obtained with the AaeAPO-modified electrode on addition of hydrogen peroxide. This reaction was suppressed when sodium azide, an inhibitor of AaeAPO, was present. Furthermore, the peroxide-dependent conversion of aniline was characterized and it was found that a polymer product via p-aminophenol is formed. And the AaeAPO biosensor was applied to determine aniline and p-aminophenol. KW - Agrocybe aegerita peroxygenase KW - Au nanoparticles KW - Direct electron transfer KW - Aniline biosensor KW - Bioelectrocatalysis Y1 - 2011 U6 - https://doi.org/10.1016/j.snb.2011.09.090 SN - 0925-4005 VL - 160 IS - 1 SP - 1419 EP - 1426 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Wollenberger, Ursula A1 - Schubert, Florian A1 - Pfeiffer, Dorothea A1 - Scheller, Frieder W. T1 - Recycling sensors based on kinases : proceedings of Mosbach Symposion on Biochemical Technology Y1 - 1996 ER - TY - JOUR A1 - Wollenberger, Ursula A1 - Schubert, Florian A1 - Pfeiffer, Dorothea A1 - Scheller, Frieder W. T1 - Enhancing biosensor performance using multienzyme systems Y1 - 1993 ER - TY - JOUR A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Enzyme activation for activator and enzyme activity measurement Y1 - 1993 ER -