TY - THES A1 - Hörnke, Maria T1 - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces BT - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Glatzel, Stefan A1 - Laschewsky, André A1 - Lutz, Jean-Francois T1 - Well-Defined uncharged polymers with a sharp UCST in water and in physiological milieu JF - Macromolecules : a publication of the American Chemical Society Y1 - 2011 U6 - https://doi.org/10.1021/ma102677k SN - 0024-9297 VL - 44 IS - 2 SP - 413 EP - 415 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Koeth, Anja A1 - Appelhans, Dietmar A1 - Robertson, Daniela A1 - Tiersch, Brigitte A1 - Koetz, Joachim T1 - Use of weakly cationic dendritic glycopolymer for morphological transformation of phospholipid vesicles into tube-like networks JF - Soft matter N2 - Using cationic polyelectrolytes with different molecular architectures, only hyperbranched poly(ethyleneimine) with maltose shell is suited to tailor the morphological transformation of anionic vesicles into tube-like networks. The interaction features of those materials partly mimic biological features of tubular proteins in nature. Y1 - 2011 U6 - https://doi.org/10.1039/c1sm06439h SN - 1744-683X VL - 7 IS - 22 SP - 10581 EP - 10584 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Radziuk, Darya A1 - Skirtach, Andre A1 - Gessner, Andre A1 - Kumke, Michael Uwe A1 - Zhang, Wei A1 - Möhwald, Helmuth A1 - Shchukin, Dmitry T1 - Ultrasonic Approach for Formation of Erbium Oxide Nanoparticles with Variable Geometries JF - Langmuir N2 - Ultrasound (20 kHz, 29 W. cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (mu s) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water. Y1 - 2011 U6 - https://doi.org/10.1021/la203622u SN - 0743-7463 VL - 27 IS - 23 SP - 14472 EP - 14480 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Lahn, Mattes A1 - Dosche, Carsten A1 - Hille, Carsten T1 - Two-photon microscopy and fluorescence lifetime imaging reveal stimulus-induced intracellular Na+ and Cl- changes in cockroach salivary acinar cells JF - American journal of physiology : Cell physiology N2 - Lahn M, Dosche C, Hille C. Two-photon microscopy and fluorescence lifetime imaging reveal stimulus-induced intracellular Na+ and Cl- changes in cockroach salivary acinar cells. Am J Physiol Cell Physiol 300: C1323-C1336, 2011. First published February 23, 2011; doi: 10.1152/ajpcell.00320.2010.-The intracellular ion homeostasis in cockroach salivary acinar cells during salivation is not satisfactorily understood. This is mainly due to technical problems regarding strong tissue autofluorescence and ineffective ion concentration quantification. For minimizing these problems, we describe the successful application of two-photon (2P) microscopy partly in combination with fluorescence lifetime imaging microscopy (FLIM) to record intracellular Na+ and Cl- concentrations ([Na+](i), [Cl-](i)) in cockroach salivary acinar cells. Quantitative 2P-FLIM Cl- measurements with the dye N-(ethoxycarbonylmethyl)-6-methoxy-quinolinium bromide indicate that the resting [Cl-](i) is 1.6 times above the Cl- electrochemical equilibrium but is not influenced by pharmacological inhibition of the Na+-K+-2Cl(-) cotransporter (NKCC) and anion exchanger using bumetanide and 4,4'-diisothiocyanatodihydrostilbene-2,2'-disulfonic acid disodium salt. In contrast, rapid Cl- reuptake after extracellular Cl- removal is almost totally NKCC mediated both in the absence and presence of dopamine. However, in physiological saline [Cl-](i) does not change during dopamine stimulation although dopamine stimulates fluid secretion in these glands. On the other hand, dopamine causes a decrease in the sodium-binding benzofuran isophthalate tetra-ammonium salt (SBFI) fluorescence and an increase in the Sodium Green fluorescence after 2P excitation. This opposite behavior of both dyes suggests a dopamine-induced [Na+](i) rise in the acinar cells, which is supported by the determined 2P-action cross sections of SBFI. The [Na+](i) rise is Cl- dependent and inhibited by bumetanide. The Ca2+-ionophore ionomycin also causes a bumetanide-sensitive [Na+](i) rise. We propose that a Ca2+-mediated NKCC activity in acinar peripheral cells attributable to dopamine stimulation serves for basolateral Na+ uptake during saliva secretion and that the concomitantly transported Cl- is recycled back to the bath. KW - epithelial ion transport KW - Na+-K+-2Cl(-) cotransporter KW - MQAE KW - SBFI KW - 2P cross section Y1 - 2011 U6 - https://doi.org/10.1152/ajpcell.00320.2010 SN - 0363-6143 VL - 300 IS - 6 SP - C1323 EP - C1336 PB - American Chemical Society CY - Bethesda ER - TY - JOUR A1 - Buller, Jens A1 - Laschewsky, André A1 - Lutz, Jean-Francois A1 - Wischerhoff, Erik T1 - Tuning the lower critical solution temperature of thermoresponsive polymers by biospecific recognition JF - Polymer Chemistry N2 - A thermosensitive statistical copolymer based on oligo(ethylene glycol) methacrylates incorporating biotin was synthesized by free radical copolymerisation. The influence of added avidin on its thermoresponsive behaviour was investigated. The specific binding of avidin to the biotinylated copolymers provoked a marked increase of the lower critical solution temperature. Y1 - 2011 U6 - https://doi.org/10.1039/c1py00001b SN - 1759-9954 VL - 2 IS - 7 SP - 1486 EP - 1489 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Tan, Irene T1 - Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports T1 - Zu grüner Separation : thermoresponsive und kohlenstoffhaltige chromatographische Trägermaterialien N2 - Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as ‘intelligent materials’ and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature ‘switch’ in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive. N2 - Polymere, welche empfindlich gegenüber externen physikalischen, chemischen und elektrischen Einflüssen sind, werden „intelligente Materialien“ genannt. Diese werden weitverbreitet in medizinischen und technischen Anwendungen eingesetzt. Auf diesem Gebiet ausführlich erforschte Materialien sind Polymere, welche durch Hitze bei einer bestimmten Temperatur (Trübungspunkt) eine physikalische Veränderung eingehen können, genannt thermoresponsive Polymere. Eingesetzt werden diese z.B. in chromatographischen Trennverfahren, in Gen- und Wirkstofftransport Vorgängen und zur Oberflächenmodifikation. Ein Beispiel für so ein Polymer ist das poly(N-isopropylacrylamide) PNIPAAM, welches unter 32 °C in Wasser gelöst vorliegt und mit Erhöhung der Temperatur als Niederschlag ausfällt. In dieser Arbeit wurde ein alternatives Polymer, das poly(2-(2-methoxyethoxy)ethylmethacrylate-co-oligo(ethyleneglycol) methacrylate) (P(MEO2MA-co-OEGMA)), untersucht, in Bezug auf Biokompatibilität und der Änderung des Trübungspunktes in Wasser. Wenn eine Schicht eines temperaturempfindlichen Polymers auf einen Monolithen (einteiliger, poröser und auf Silika-basierendes Material) aufgebracht wird, werden die thermoresponsiven Eigenschaften auf die Oberfläche dieses Monolithen übertragen. Der Monolith dient hier als Säule in einer HPLC-Anlage. Es wurde gezeigt, dass das Hybrid-Material als einfacher „Temperaturschalter“ in der Trennung von fünf verschiedenen Steroiden in Wasser agieren kann. Untersucht wurde die Separation verschiedener Analyten mit dem Variieren der Säulentemperatur. Zusätzlich wurden mehr komplexe biochemische Stoffe, wie Proteine, getestet. Die Bedeutung dieser Arbeit ist zurückzuführen auf Separationsprozesse, welche umweltfreundlichen Bedingungen nutzen, da die rauen chemischen Bedingungen in konventionellen Separationsprozessen die biologische Inaktivität der Verbindungen zur Folge haben können. Der zweite Teil der Arbeit beschäftigte sich mit der Entwicklung eines alternativen Trägermaterials als Ersatz zu den Silika-basierende Trennungssäulen. Kohlenstoffmaterialien sind aufgrund ihrer ausgezeichneten mechanischen Härte und chemischen Stabilität eine vielversprechend Alternative. Die Synthese von Kohlenstoffkugeln als Trägermaterial kann als „grüner“ Prozess in meiner Arbeit angesehen werden, da milde Synthesebedingungen in purem Wasser verwendet wurden. Die Leistungsfähigkeit des Materials wurde mit einer Serie von Separationsreaktionen gezeigt. KW - thermoresponsive KW - poly(N-isopropylacrylamide) KW - oligo(ethyleneglycol) KW - Monolith KW - Chromatographie KW - thermoresponsive KW - poly(N-isopropyl acrylamide) KW - oligo(ethylene glycol) KW - monolith KW - chromatography Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53130 ER - TY - JOUR A1 - Jelicic, Aleksandra A1 - Yasin, Muttaqin A1 - Beuermann, Sabine T1 - Toward the description and prediction of solvent induced variations in Methacrylate Propagation Rate Coefficients on the basis of Solvatochromic Parameters JF - Macromolecular reaction engineering N2 - Benzyl methacrylate (BzMA) propagation rate coefficients, k(p), were determined in ionic liquids and common organic solvents via pulsed-laser polymerizations with subsequent polymer analysis by size-exclusion chromatography (PLP-SEC). The aim of the work is to gain a deeper understanding of the solvent influence on k(p) and to develop a general correlation between solvent-induced variations in k(p) and solvent properties. Applying a linear solvation energy relationship (LSER), which correlates k(p) to solvent solvatochromic parameters, suggests that dipolarity/polarizability determines the solvent influence on k(p). To compare the solvent influence on BzMA k(p) with data for methyl methacrylate, hydroxypropyl methacrylate, and 2-ethoxyethyl methacrylate normalized k(p) data were treated by a single LSER, providing a universal treatment of the solvent influence on the propagation kinetics of the four monomers. Further, the predictive capabilities of this universal correlation were tested with additional monomers from the methacrylate family. KW - ionic liquid KW - kinetics (polym.) KW - radical polymerization KW - solvent influence Y1 - 2011 U6 - https://doi.org/10.1002/mren.201000058 SN - 1862-832X VL - 5 IS - 5-6 SP - 232 EP - 242 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Kupstat, Annette A1 - Kumke, Michael Uwe A1 - Hildebrandt, Niko T1 - Toward sensitive, quantitative point-of-care testing (POCT) of protein markers miniaturization of a homogeneous time-resolved fluoroimmunoassay for prostate-specific antigen detection JF - The analyst : the analytical journal of the Royal Society of Chemistry N2 - Point-of-care testing (POCT) systems which allow for a sensitive, quantitative detection of protein markers are extremely useful for the early detection and therapy progress monitoring of cancer. However, currently commercially available POCT devices are mainly limited to the qualitative detection of protein markers. In this study we demonstrate the successive miniaturization of a sensitive and fast assay for the quantitative detection of prostate-specific antigen (PSA) using a well established and clinically approved homogeneous time-resolved fluoroimmunoassay technology (TRACE (R)) on a commercial plate-reader system (KRYPTOR (R)). Regarding the initial requirements for the development of POCT devices we applied a 30-fold assay volume reduction (150 mu L to 5 mu L) to achieve a reasonable lab-on-a-chip volume and a 24-fold and 120-fold excitation pulse energy reduction to achieve reasonable pulse energies for low-cost miniature excitation sources. Due to highly efficient optimization of key POCT parameters our miniaturized PSA assay achieved a 30% increased sensitivity and a 2-fold improved limit of detection compared to the standard plate-reader method. Our results demonstrate the successful implementation of key parameters for a significant miniaturization and for cost reduction in the clinically approved KRYPTOR (R) platform for protein detection. The technological alterations required are easy-to-implement and can be immediately adapted for more than 30 diagnostic protein markers already available for the KRYPTOR (R) platform. These features strongly recommend our assay format to be utilized in innovative, sensitive, quantitative POCT of protein markers. Y1 - 2011 U6 - https://doi.org/10.1039/c0an00684j SN - 0003-2654 VL - 136 IS - 5 SP - 1029 EP - 1035 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Xie, Zai-Lai A1 - Taubert, Andreas T1 - Thermomorphic behavior of the ionic liquids [C(4)mim][FeCl4] and [C(12)mim][FeCl4] JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The iron-containing ionic liquids 1-butyl-3-methylimidazolium tetrachloroferrate(III) [C(4)mim][FeCl4] and 1-dodecyl-3-methylimidazolium tetrachloroferrate(III) [C(12)mim][FeCl4] exhibit a thermally induced demixing with water (thermomorphism). The phase separation temperature varies with IL weight fraction in water and can be tuned between 100 degrees C and room temperature. The reversible lower critical solution temperature (LCST) is only observed at IL weight fractions below ca. 35% in water. UV/Vis, IR, and Raman spectroscopy along with elemental analysis prove that the yellow-brown liquid phase recovered after phase separation is the starting IL [C(4)mim][FeCl4] and [C(12)mim][FeCl4], respectively. Photometry and ICP-OES show that about 40% of iron remains in the water phase upon phase separation. Although the process is thus not very efficient at the moment, the current approach is the first example of an LCST behavior of a metal-containing IL and therefore, although still inefficient, a prototype for catalyst removal or metal extraction. KW - imidazolium KW - ionic liquids KW - phase transitions KW - Raman spectroscopy KW - thermomorphism Y1 - 2011 U6 - https://doi.org/10.1002/cphc.201000808 SN - 1439-4235 VL - 12 IS - 2 SP - 364 EP - 368 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika A1 - Pick, Charlotte T1 - The photo-dehydro-Diels-Alder (PDDA) reaction JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The photo-dehydro-Diels-Alder (PDDA) reaction is a valuable extension of the classical Diels-Alder (DA) reaction. The PDDA reaction differs from the DA reaction by the replacement of one of the C-C-double bonds of the diene moiety by a C-C triple bond and by the photochemical triggering of the reaction. This entails that, in contrast to the DA reaction, the PDDA reaction proceeds according to a multistage mechanism with biradicals and cycloallenes as intermediates. The PDDA reaction provides access to a considerable variety of compound classes. For example, 1-phenylnaphthlenes, 1,1'-binaphthyls, N-heterocyclic biaryls, and naphthalenophanes could be obtained by this reaction. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob06066j SN - 1477-0520 VL - 9 IS - 22 SP - 7599 EP - 7605 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Antoniou, Stella A1 - Pashalidis, I. A1 - Gessner, Andre A1 - Kumke, Michael Uwe T1 - The effect of humic acid on the formation and solubility of secondary solid phases (Nd(OH)CO3 and Sm(OH)CO3) JF - Radiochimica acta : international journal for chemical aspects of nuclear science and technology N2 - The formation of secondary Ln(III) solid phases (e.g. Nd(OH)CO3 and Sm(OH)CO3) has been studied as a function of the humic acid (HA) concentration in 0.1 M NaClO4 aqueous solution and their solubility has been investigated in the neutral pH range (6.5-8) under normal atmospheric conditions. Nd(III) and Sm(III) were selected as analogues for trivalent lanthanide and actinide ions. The solid phases under investigation have been prepared by alkaline precipitation and characterized by TGA, ATR-FTIR, XRD, TRLFS, DR-UV-Vis and Raman spectroscopy, and solubility measurements. The spectroscopic data obtained indicate that Nd(OH)CO3 and Sm(OH)CO3 are stable and remain the solubility limiting solid phases even in the presence of increased HA concentration (0.5 g/L) in solution. Upon base addition in the Ln(III)-HA system decomplexation of the previously formed Ln(III)-humate complexes and precipitation of two distinct phases occurs, the inorganic (Ln(OH)CO3) and the organic phase (HA), which is adsorbed on the particle surface of the former. Nevertheless, HA affects the particle size of the solid phases. Increasing HA concentration results in decreasing crystallite size of the Nd(OH)CO3 and increasing crystallite size of the Sm(OH)CO3 solid phase, and affects inversely the solubility of the solid phases. However, this impact on the solid phase properties is expected to be of minor relevance regarding the chemical behavior and migration of trivalent lanthanides and actinides in the geosphere. KW - Lanthanide ions KW - Humic acid KW - Solid phase KW - Solubility KW - Raman KW - TRLFS KW - DR-UV-Vis Y1 - 2011 U6 - https://doi.org/10.1524/ract.2011.1812 SN - 0033-8230 VL - 99 IS - 4 SP - 217 EP - 223 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Wellert, Stefan A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Richardt, Andre A1 - Lapp, Alain A1 - Holderer, Olaf A1 - Gaeb, Juergen A1 - Blum, Marc-Michael A1 - Schulreich, Christoph A1 - Stehle, Ralf A1 - Hellweg, Thomas T1 - The DFPase from Loligo vulgaris in sugar surfactant-based bicontinuous microemulsions structure, dynamics, and enzyme activity JF - European biophysics journal : with biophysics letters ; an international journal of biophysics N2 - The enzyme diisopropyl fluorophosphatase (DFPase) from the squid Loligo vulgaris is of great interest because of its ability to catalyze the hydrolysis of highly toxic organophosphates. In this work, the enzyme structure in solution (native state) was studied by use of different scattering methods. The results are compared with those from hydrodynamic model calculations based on the DFPase crystal structure. Bicontinuous microemulsions made of sugar surfactants are discussed as host systems for the DFPase. The microemulsion remains stable in the presence of the enzyme, which is shown by means of scattering experiments. Moreover, activity assays reveal that the DFPase still has high activity in this complex reaction medium. To complement the scattering experiments cryo-SEM was also employed to study the microemulsion structure. KW - Dynamic light scattering KW - Neutron spin echo KW - Microemulsion KW - Enzyme catalysis KW - SANS KW - Protein structure Y1 - 2011 U6 - https://doi.org/10.1007/s00249-011-0689-0 SN - 0175-7571 VL - 40 IS - 6 SP - 761 EP - 774 PB - Springer CY - New York ER - TY - GEN A1 - Troll, K. A1 - Kulkarni, Amit A1 - Wang, W. A1 - Darko, C. A1 - Koumba, A. M. Bivigou A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - The collapse transition of poly(styrene-b-(N-isopropyl acrylamide)) diblock copolymers in aqueous solution and in thin films T2 - Colloid and polymer science : official journal of the Kolloid-Gesellschaft Y1 - 2011 U6 - https://doi.org/10.1007/s00396-010-2344-1 SN - 0303-402X VL - 289 IS - 2 SP - 227 EP - 227 PB - Springer CY - New York ER - TY - JOUR A1 - Adelsberger, Joseph A1 - Meier-Koll, Andreas A1 - Bivigou Koumba, Achille Mayelle A1 - Busch, Peter A1 - Holderer, Olaf A1 - Hellweg, Thomas A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - The collapse transition and the segmental dynamics in concentrated micellar solutions of P(S-b-NIPAM) diblock copolymers JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - We investigate concentrated solutions of poly(styrene-b-N-isopropyl acrylamide) (P(S-b-NIPAM)) diblock copolymers in deuterated water (D2O). Both structural changes and the changes of the segmental dynamics occurring upon heating through the lower critical solution temperature (LCST) of PNIPAM are studied using small-angle neutron scattering and neutron spin-echo spectroscopy. The collapse of the micellar shell and the cluster formation of collapsed micelles at the LCST as well as an increase of the segmental diffusion coefficient after crossing the LCST are detected. Comparing to our recent results on a triblock copolymer P(S-b-NIPAM-b-S) [25], we observe that the collapse transition of P(S-b-NIPAM) is more complex and that the PNIPAM segmental dynamics are faster than in P(S-b-NIPAM-b-S). KW - Block copolymers KW - Responsive polymers KW - Small-angle neutron scattering KW - Neutron spin-echo spectroscopy Y1 - 2011 U6 - https://doi.org/10.1007/s00396-011-2382-3 SN - 0303-402X VL - 289 IS - 5-6 SP - 711 EP - 720 PB - Springer CY - New York ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - The anisotropic effect of functional groups in H-1 NMR spectra is the molecular response property of spatial NICS-the frozen conformational equilibria of 9-arylfluorenes JF - Tetrahedron N2 - Rotation about the single bond adjoining the aryl and fluorene moieties in 9-arylfluorenes can be frozen out on the NMR timescale if methyl groups are located at either one or both of the ortho positions of the aryl substituent. In the ground-state of these rotamers, the planes of the aryl and fluorene moieties are perpendicular to each other and the methyl substituents are consequently positioned either above the fluorene moiety or in-plane with it; thus, the methyl protons are either shielded or deshielded, respectively, due to the ring current effect of the fluorene moiety. This anisotropic effect on the H-1 chemical shifts of the methyl protons has been quantified on the basis of through-space NMR shieldings (TSNMRS) and subsequently Delta delta(calcd) compared with the experimentally observed chemical shift differences, Delta delta(exp). In this context, the experimental anisotropic effects of functional groups in the H-1 NMR have proven to quantitatively be the molecular response property of theoretical spatial nucleus independent chemical shieldings (NICS). Differences between Delta delta(calcd) and Delta delta(exp) were, for the first time, also quantified as arising from steric compression. KW - Through-space NMR shieldings (TSNMRS) KW - Spatial NICS KW - Anisotropic effect KW - Iso-chemical-shielding surfaces (ICSS) KW - 9-Arylfluorenes Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.06.005 SN - 0040-4020 VL - 67 IS - 32 SP - 5740 EP - 5743 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - The anisotropic effect of functional groups in 1H NMR spectra is the molecular response property of spatial NICS-the frozen conformational equilibria of 9-arylfluorenes N2 - Rotation about the single bond adjoining the aryl and fluorene moieties in 9-arylfluorenes can be frozen out on the NMR timescale if methyl groups are located at either one or both of the ortho positions of the aryl substituent. In the ground-state of these rotamers, the planes of the aryl and fluorene moieties are perpendicular to each other and the methyl protons are either shielded or deshielded, respectively, due to the ringe current effect of the fluorene moiety. This anisotropic effect on the 1H chemical shifts of the methyl protons has been quantified on the basis of through- space NMR shieldings (TSNMRS) and subsequently _______ compared with the experimentally observed chemical shift differences _____. In this context, the experimental anisotropic effects of functional groups in the !H NMR have proven to quantitatively be the molecular response property of theoretical spatial nucleus independent chemical shieldings (NICS). Differences between _______ and _____ were, for the first time, also quantified as arising from steric compression. Y1 - 2011 UR - http://www.sciencedirect.com/science/article/pii/S0040402011008507 (13.9.13) SN - 0040-4020 ER - TY - JOUR A1 - Farra, Ramzi A1 - Thiel, Kerstin A1 - Winter, Alette A1 - Klamroth, Tillmann A1 - Poeppl, Andreas A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Taubert, Andreas A1 - Strauch, Peter T1 - Tetrahalidocuprates(II)-structure and EPR spectroscopy Part 1: Tetrabromidocuprates(II) JF - New journal of chemistry N2 - Tetrahalidocuprates(II) show a high degree of structural flexibility. We present the results of crystallographic and electron paramagnetic resonance (EPR) spectroscopic analyses of four new tetrabromidocuprate(II) compounds and compare the results with previously reported data. The cations in the new compounds are the sterically demanding benzyltriphenylphosphonium, methyltriphenylphosphonium, tetraphenylphosphonium, and hexadecyltrimethylammonium ions; they were used to achieve a reasonable separation of the paramagnetic Cu(II) ions for EPR spectroscopy. X-Ray crystallography shows that in all four complexes the [CuBr4](2-) units have a distorted tetrahedral coordination geometry which is in agreement with DFT calculations. The EPR hyperfine structure was not resolved. This is due to the exchange broadening resulting from still incomplete separation of the paramagnetic Cu(II) centres. Nevertheless, the principal values of the electron Zeemann tensor (g(parallel to) and g(perpendicular to)) of the complexes could be determined. A correlation of structural (X-ray) parameters with the spin density at the copper centres (DFT) is well reflected in the EPR spectra of the bromidocuprates. This enables the correlation of X-ray and EPR parameters to predict the structure of tetrabromidocuprates in physical states other than the crystalline state. As a result, we provide a method to structurally characterize [CuBr4](2-) in, for example, ionic liquids or in solution, which has important implications for e.g. catalysis or materials science. Y1 - 2011 U6 - https://doi.org/10.1039/c1nj20271e SN - 1144-0546 VL - 35 IS - 12 SP - 2793 EP - 2803 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Juma, Wanyama P. A1 - Akala, Hoseah M. A1 - Eyase, Fredrick L. A1 - Muiva, Lois M. A1 - Heydenreich, Matthias A1 - Okalebo, Faith A. A1 - Gitu, Peter M. A1 - Peter, Martin G. A1 - Walsh, Douglas S. A1 - Imbuga, Mabel A1 - Yenesew, Abiy T1 - Terpurinflavone an antiplasmodial flavone from the stem of Tephrosia Purpurea JF - Phytochemistry letters N2 - The stem extract of Tephrosia purpurea showed antiplasmodial activity against the D6 (chloroquine-sensitive) and W2 (chloroquine-resistant) strains of Plasmodium falciparum with IC(50) values of 10.47 +/- 2.22 mu g/ml and 12.06 +/- 2.54 mu g/ml, respectively. A new prenylated flavone, named terpurinflavone, along with the known compounds lanceolatin A, (-)-semiglabrin and lanceolatin B have been isolated from this extract. The new compound, terpurinflavone, showed the highest antiplasmodial activity with IC(50) values of 3.12 +/- 0.28 mu M (D6) and 6.26 +/- 2.66 mu M (W2). The structures were determined on the basis of spectroscopic evidence. KW - Tephrosia purpurea KW - Leguminosae KW - Stem KW - Flavone KW - Terpurinflavone KW - Antiplasmodial Y1 - 2011 U6 - https://doi.org/10.1016/j.phytol.2011.02.010 SN - 1874-3900 VL - 4 IS - 2 SP - 176 EP - 178 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Weiss, Jan A1 - Laschewsky, André T1 - Temperature-induced self-assembly of triple-responsive triblock copolymers in aqueous solutions JF - Langmuir N2 - A series of triple-thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (PNPAM, A), poly(methoxydiethylene glycol acrylate) (PMDEGA, B), and poly(N-ethylacrylamide) (PNEAM, C) was synthesized by sequential reversible addition-fragmentation chain transfer polymerizations. Polymers of differing block sequences, ABC, BAC, and ACB, with increasing phase transition temperatures in the order A < B < C were prepared. Their aggregation behavior in dilute aqueous solution was investigated using dynamic light scattering, turbidimetry, and NMR spectroscopy. The self-organization of such polymers was found to dependent strongly on the block sequence. While polymers with a terminal low-LCST (lower critical solution temperature) block undergo aggregation above the first phase transition temperature at 20-25 degrees C, triblock copolymers with the low-LCST block in the middle show aggregation only above the second phase transition. The collapse of the middle block is not sufficient to induce aggregation but produces instead stable, unimolecular micelles with a collapsed middle block, as supported by NMR and fluorescence probe data. Continued heating of all copolymers led to two additional thermal transitions at 40-55 and 70-80 degrees C, which could be correlated to the phase transitions of the B and C blocks, respectively. All polymers show a high tendency for cluster formation, once aggregation is induced. The carrier abilities of the triple responsive triblock copolymers for hydrophobic agents were probed with the solvatochromic fluorescence dye Nile Red. With passing through the first thermal transition, the block copolymers are capable of solubilizing Nile Red. In the case of block copolymers with sequences ABC or ACB, which bear the low-LCST block at one terminus, notable amounts of dye are solubilized already at this stage. In contrast, the hydrophobic probe is much less efficiently incorporated by the BAC triblock copolymer, which forms unimolecular micelles. Only after the collapse of the B block, when reaching the second phase transition at about 45 degrees C, does aggregation occur and solubilization becomes efficient. In the case of ABC and ACB polymers, the hydrophobic probe seems to partition between the originally collapsed A chains and the additional hydrophobic chains formed after the collapse of the less hydrophobic B block. Y1 - 2011 U6 - https://doi.org/10.1021/la200115p SN - 0743-7463 VL - 27 IS - 8 SP - 4465 EP - 4473 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Fechner, Mabya T1 - Synthetische Polyampholyte als pH-sensitive Komponente in selbstorganisierten Systemen zur Nanostrukturierung von Materialien Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Federico, Stefania T1 - Synthetic peptides derived from decorin as building blocks for biomaterials based on supramolecular interactions T1 - Synthetische Peptide Basierend auf Decorin als Bausteine für Supramolekulare Biomaterialien N2 - In this work, the development of a new molecular building block, based on synthetic peptides derived from decorin, is presented. These peptides represent a promising basis for the design of polymer-based biomaterials that mimic the ECM on a molecular level and exploit specific biological recognition for technical applications. Multiple sequence alignments of the internal repeats of decorin that formed the inner and outer surface of the arch-shaped protein were used to develop consensus sequences. These sequences contained conserved sequence motifs that are likely to be related to structural and functional features of the protein. Peptides representative for the consensus sequences were synthesized by microwave-assisted solid phase peptide synthesis and purified by RP-HPLC, with purities higher than 95 mol%. After confirming the desired masses by MALDI-TOF-MS, the primary structure of each peptide was investigated by 1H and 2D NMR, from which a full assignment of the chemical shifts was obtained. The characterization of the peptides conformation in solution was performed by CD spectroscopy, which demonstrated that using TFE, the peptides from the outer surface of decorin show a high propensity to fold into helical structures as observed in the original protein. To the contrary, the peptides from the inner surface did not show propensity to form stable secondary structure. The investigation of the binding capability of the peptides to Collagen I was performed by surface plasmon resonance analyses, from which all but one of the peptides representing the inner surface of decorin showed binding affinity to collagen with values of dissociation constant between 2•10-7 M and 2.3•10-4 M. On the other hand, the peptides representative for the outer surface of decorin did not show any significant interaction to collagen. This information was then used to develop experimental demonstration for the binding capabilities of the peptides from the inner surface of decorin to collagen even when used in more complicated situations close to possible appications. With this purpose, the peptide (LRELHLNNN) which showed the highest binding affinity to collagen (2•10-7 M) was functionalized with an N-terminal triple bond in order to obtain a peptide dimer via copper(I)-catalyzed cycloaddition reaction with 4,4'-diazidostilbene-2,2'-disulfonic acid. Rheological measurements showed that the presence of the peptide dimer was able to enhance the elastic modulus (G') of a collagen gel from ~ 600 Pa (collagen alone) to ~ 2700 Pa (collagen and peptide dimer). Moreover, it was shown that the mechanical properties of a collagen gel can be tailored by using different molar ratios of peptide dimer respect to collagen. The same peptide, functionalized with the triple bond, was used to obtain a peptide-dye conjugate by coupling it with N-(5'-azidopentanoyl)-5-aminofluorescein. An aqueous solution (5 vol% methanol) of the peptide dye conjugate was injected into a collagen and a hyaluronic acid (HA) gel and images of fluorescence detection showed that the diffusion of the peptide was slower in the collagen gel compared to the HA gel. The third experimental demonstration was gained using the peptide (LSELRLHNN) which showed the lower binding affinity (2.3•10-4 M) to collagen. This peptide was grafted to hyaluronic acid via EDC-chemistry, with a degree of functionalization of 7 ± 2 mol% as calculated by 1H-NMR. The grafting was further confirmed by FTIR and TGA measurements, which showed that the onset of decomposition for the HA-g-peptide decreased by 10 °C compared to the native HA. Rheological measurements showed that the elastic modulus of a system based on collagen and HA-g-peptide increased by almost two order of magnitude (G' = 200 Pa) compared to a system based on collagen and HA (G' = 0.9 Pa). Overall, this study showed that the synthetic peptides, which were identified from decorin, can be applied as potential building blocks for biomimetic materials that function via biological recognition. N2 - In dieser Arbeit wird das Design, die Synthese und Analyse neuer molekularer Bausteine für Biomaterialien basierend auf synthetischen, von Decorin abgeleiteten Peptiden beschrieben. Diese Peptide sind deshalb als Baustein für polymer-basierte Biomaterialien von besonderem Interesse, da sie die extrazelluläre Matrix (ECM) auf molekularer Ebene nachempfinden und spezifische, biologische wichtige Interaktionen für technische Anwendungen nutzbar machen. Das Alignment multipler Sequenzen der internen Repeats von Decorin, die jeweils die innere bzw. äußere Seite des sichelförmigen Decorins bilden, wurde genutzt, um Konsensus-Sequenzen zu definieren. Diese Sequenzen beinhalten stark konservierte Sequenzmotive, die wahrscheinlich wichtig für Struktur und Funktion des Proteins sind. Ausgewählte Peptide, die repräsentativ für die Konsensus-Sequenzen sind, wurden dann mittels Mikrowellen unterstützter Festphasensynthese synthetisiert und mit RP-HPLC aufgereinigt, so dass Peptide mit Reinheiten ≥ 95 mol% erhalten wurden. Die Peptide wurden per MALDI-TOF-MS sowie 1D und 2D NMR Spektroskopie charakterisiert, wobei die Zuordnung der chemischen Verschiebungen zu einzelnen Protonen und Kohlenstoffen aus den 2D NMR Experimenten erfolgte. In Lösung wurden die Peptide zudem mit CD Spektroskopie untersucht, wobei gezeigt werden konnte, dass nur Peptide, die von der äußeren Seite des Decorins abgeleitet wurden, sich durch Zugabe von 2,2,2-Trifluorethanol zu α-Helices falten. Diese Faltung ist auch in der Röntgenstruktur bei den korrespondierenden Abschnitten zu finden. Im Gegensatz dazu zeigten Peptide, die von der inneren Seite des Decorins abgeleitet wurden, keine stabilen Sekundärstrukturen in Lösung (β-Faltblattstruktur in der Röntgenstruktur). Bindungsstudien der Peptide zu Kollagen I wurden mit Oberflächenplasmonenresonanz durchgeführt, wobei gezeigt werden konnte, dass alle bis auf ein Peptid, die von der innneren Seite abgeleitet wurden, an Kollagen mit Dissoziationskonstanten von 2•10-7 M bis 2.3•10-4 M binden, während Peptide, die für die äußere Seite von Decorin repräsentativ sind, keine Bindung an Kollagen I zeigten. Diese Information wurde genutzt, um experimentelle Demonstrationsobjekte dieser Interaktion in komplexeren, einer späteren Anwendung näheren Situation, zu entwickeln. Dazu wurde das Peptide LRELHLNNN, welches die stärkste Bindung zu Kollagen I zeigte (KD = 2•10-7 M), N-terminal mit einer Alkinbindung funktionalisiert, so dass durch Kupfer (I) katalysierte Reaktion mit 4,4'-Diazidostilben-2,2'-disulfonsäure ein Peptid-Dimer erhalten werden konnte. Rheologische Untersuchungen zeigten, dass durch Zugabe des Peptid-Dimers der Elastizitätsmodul G' von Kollagen-Gelen von ~ 600 Pa (nur Kollagen) auf ~ 2700 Pa (Kollagen und Peptide-Dimer) gesteigert werden konnte. Darüber hinaus konnte gezeigt werden, dass die Veränderung der mechanischen Eigenschaften der Gele durch Veränderung des Kollagen:Peptid-Dimer Verhältnisses angepasst werden konnten. Das gleiche, mit einer Alkin-Bindung funktionaliserte Peptid wurde dann zur Darstellung eines Peptid-Fluorescein Konjugats genutzt, indem es mit N-(5'-azidopentanoyl)-5-aminofluorescein umgesetzt wurde. Eine wässrige Lösung des Peptid-Farbstoff-Konjugats wurde dann in Kollagen- bzw. Hyaluronsäuregele injiziert. Die Diffusion des Peptid-Farbstoff-Konjugats war in Kollagengelen im Vergleich zu Hyaluronsäuregelen deutlich verlangsamt. Das dritte Demonstrationsobjekt wurde erhalten, indem das Peptid LSELRLHNN, welches die geringste Bindung an Kollagen zeigte (KD = 2.3•10-4 M), auf Hyaluronsäure (HA) gegrafted wurde. Die Reaktion wurde durch Carbodiimid-mediierte Kupplung erreicht, und ein Funktionalisierungsgrad von 7 ± 2 mol% wurde durch Integration der 1H-NMR Spektren bestimmt. Das erfolgreiche Grafting wurde durch FTIR- und TGA-Untersuchungen bestätigt. In letzteren wurde gezeigt, dass der thermische Abbau durch das Grafting bei etwas niedrigeren Temperaturen beginnt als der Abbau reiner Hyaluronsäure (ΔT = 10 °C). Rheologische Untersuchungen zeigten, dass ein System aus Kollagen und HA-g-Peptid ein um zwei Größenordnungen höheren Elastizitätsmodul G' hat (G' = 200 Pa) als Systeme, die aus einer physikalischen Mischung von Kollagen und HA bestehen (G' = 0.9 Pa). Zusammenfassend konnte gezeigt werden, dass die Peptide, die von Decorin abgeleitet wurden, als Kollagen-bindende Bausteine für biomimetische Materialien genutzt werden können. KW - Decorin KW - Peptide KW - Supramolekularen Wechselwirkungen KW - Kollagen KW - Physikalische Vernetzung KW - Decorin KW - Peptides KW - Supramolecular Interactions KW - Collagen KW - Physical Crosslinking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59661 ER - TY - THES A1 - Weiß, Jan T1 - Synthesis and self-assembly of multiple thermoresponsive amphiphilic block copolymers T1 - Synthese und Selbstorganisation von mehrfach thermisch schaltbaren amphiphilen Blockcopolymeren N2 - In the present thesis, the self-assembly of multi thermoresponsive block copolymers in dilute aqueous solution was investigated by a combination of turbidimetry, dynamic light scattering, TEM measurements, NMR as well as fluorescence spectroscopy. The successive conversion of such block copolymers from a hydrophilic into a hydrophobic state includes intermediate amphiphilic states with a variable hydrophilic-to-lipophilic balance. As a result, the self-organization is not following an all-or-none principle but a multistep aggregation in dilute solution was observed. The synthesis of double thermoresponsive diblock copolymers as well as triple thermoresponsive triblock copolymers was realized using twofold-TMS labeled RAFT agents which provide direct information about the average molar mass as well as residual end group functionality from a routine proton NMR spectrum. First a set of double thermosensitive diblock copolymers poly(N-n-propylacrylamide)-b-poly(N-ethylacrylamide) was synthesized which differed only in the relative size of the two blocks. Depending on the relative block lengths, different aggregation pathways were found. Furthermore, the complementary TMS-labeled end groups served as NMR-probes for the self-assembly of these diblock copolymers in dilute solution. Reversible, temperature sensitive peak splitting of the TMS-signals in NMR spectroscopy was indicative for the formation of mixed star-/flower-like micelles in some cases. Moreover, triple thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (A), poly(methoxydiethylene glycol acrylate) (B) and poly(N-ethylacrylamide) (C) were obtained from sequential RAFT polymerization in all possible block sequences (ABC, BAC, ACB). Their self-organization behavior in dilute aqueous solution was found to be rather complex and dependent on the positioning of the different blocks within the terpolymers. Especially the localization of the low-LCST block (A) had a large influence on the aggregation behavior. Above the first cloud point, aggregates were only observed when the A block was located at one terminus. Once placed in the middle, unimolecular micelles were observed which showed aggregation only above the second phase transition temperature of the B block. Carrier abilities of such triple thermosensitive triblock copolymers tested in fluorescence spectroscopy, using the solvatochromic dye Nile Red, suggested that the hydrophobic probe is less efficiently incorporated by the polymer with the BAC sequence as compared to ABC or ACB polymers above the first phase transition temperature. In addition, due to the problem of increasing loss of end group functionality during the subsequent polymerization steps, a novel concept for the one-step synthesis of multi thermoresponsive block copolymers was developed. This allowed to synthesize double thermoresponsive di- and triblock copolymers in a single polymerization step. The copolymerization of different N-substituted maleimides with a thermosensitive styrene derivative (4-vinylbenzyl methoxytetrakis(oxyethylene) ether) led to alternating copolymers with variable LCST. Consequently, an excess of this styrene-based monomer allowed the synthesis of double thermoresponsive tapered block copolymers in a single polymerization step. N2 - Die Selbstorganisation von mehrfach thermisch schaltbaren Blockcopolymeren in verdünnter wässriger Lösung wurde mittels Trübungsphotometer, dynamischer Lichtstreuung, TEM Messungen, NMR sowie Fluoreszenzspektroskopie untersucht. Die schrittweise Überführung eines hydrophilen in ein hydrophobes Blockcopolymer beinhaltet ein oder mehr amphiphile Zwischenstufen mit einstellbarem hydrophilen zu lipophilen Anteil (HLB). Dies führt dazu, dass die Selbstorganisation solcher Polymere in Lösung nicht nur einem Alles-oder-nichts-Prinzip folgt sondern ein mehrstufiges Aggregationsverhalten beobachtet wird. Die Synthese von doppelt thermisch schaltbaren Diblockcopolymeren und dreifach thermisch schaltbaren Triblockcopolymeren wurde durch sequenzielle RAFT Polymerisation realisiert. Dazu wurden zweifach TMS-markierte RAFT Agentien verwendet, welche die Bestimmung der molaren Masse sowie der verbliebenen Endgruppenfunktionalität direkt aus einem Protonen NMR Spektrum erlauben. Mit diesen RAFT Agentien wurde zunächst eine Serie von doppelt thermisch schaltbaren Diblockcopolymeren aus Poly(N-n-propylacrylamid)-b-Poly(N-ethylacrylamid), welche sich lediglich durch die relativen Blocklängen unterscheiden, hergestellt. In Abhängigkeit von der relativen Blocklänge wurde ein unterschiedliches Aggregationsverhalten der Diblockcopolymere in verdünnter wässriger Lösung beobachtet. Des Weiteren wirken die komplementär TMS-markierten Endgruppen als NMR-Sonden während der schrittweisen Aggregation dieser Polymere. Reversible, temperaturabhängige Peakaufspaltung der TMS-Signale in der NMR Spektroskopie spricht für eine Aggregation in gemischte stern-/blumenartige Mizellen, in denen ein Teil der hydrophoben Endgruppen in den hyrophoben Kern zurückfaltet. Obendrein wurden dreifach thermisch schaltbare Triblockcopolymere aus Poly(N-n-propylacrylamid) (A), Poly(methoxydiethylen glycol acrylat) (B) und Poly(N-ethylacrylamid) (C) in allen möglichen Blocksequenzen (ABC, BAC, ACB) durch schrittweisen Aufbau mittels RAFT Polymerisation erhalten. Das Aggregationsverhalten dieser Polymere in verdünnter wässriger Lösung war relativ komplex und hing stark von der Position der einzelnen Blöcke in den Triblockcopolymeren ab. Besonders die Position des Blocks mit der niedrigsten LCST (A) war ausschlaggebend für die resultierenden Aggregate. So wurde oberhalb der ersten Phasenübergangstemperatur nur Aggregation der Triblockcopolymere beobachtet, wenn der A Block an einem der beiden Enden der Polymere lokalisiert war. Wurde der A Block hingegen in der Mitte der Polymere positioniert, entstanden unimere Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur, welche erst aggregierten, nachdem der zweite Block (B) seinen Phasenübergang durchlief. Die Transportereigenschaften dieser Triblockcopolymere wurden mittels Fluoreszenzspektroskopie getestet. Dazu wurde die Einlagerung eines hydrophoben, solvatochromen Fluoreszenzfarbstoffes, Nilrot, in Abhängigkeit der Temperatur untersucht. Im Gegensatz zu den Polymeren mit der Blocksequenz ABC oder ACB, zeigten die Polymere mit der Sequenz BAC eine verminderte Aufnahmefähigkeit des hydrophoben Farbstoffes oberhalb des ersten Phasenübergangs, was auf die fehlende Aggregation und die damit verbundenen relativ kleinen hydrophoben Domänen der unimolekularen Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur zurückzuführen ist. Aufgrund des zunehmenden Verlustes von funktionellen Endgruppen während der RAFT Synthese von Triblockcopolymeren wurde ein neuartiges Konzept zur Einschrittsynthese von mehrfach schaltbaren Blockcopolymeren entwickelt. Dieses erlaubt die Synthese von mehrfach schaltbaren Diblock- und Triblockcopoylmeren in einem einzelnen Reaktionsschritt. Die Copolymeriation von verschiedenen N-substituierten Maleimiden mit einem thermisch schaltbaren Styrolderivat (4-Vinylbenzylmethoxytetrakis(oxyethylene) ether) ergab alternierende Copolymere mit variabler LCST. Die Verwendung eines Überschusses dieses styrolbasierten Monomers erlaubt ferner die Synthese von Gradientenblockcopolymeren in einem einzelnen Polymerisationsschritt. KW - Selbstorganisation KW - Blockcopolymer KW - RAFT KW - temperaturschaltbar KW - Mizelle KW - self-assembly KW - block copolymer KW - RAFT KW - thermoresponsive KW - micelle Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53360 ER - TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Heunemann, Peggy A1 - Gradzielski, Michael A1 - Prevost, Sylvain A1 - Liang, Hua A1 - Rabe, Jürgen P. A1 - Lutz, Jean-Francois T1 - Synthesis and self-assembly of amphiphilic semi-brush and dual brush block copolymers in solution and on surfaces JF - Polymer Chemistry N2 - The combination of two techniques of controlled free radical polymerization, namely the reversible addition fragmentation chain transfer (RAFT) and the atom transfer radical polymerization (ATRP) techniques, together with the use of a macromonomer allowed the synthesis of symmetrical triblock copolymers, designed as amphiphilic dual brushes. One type of brush was made of poly(n-butyl acrylate) as soft hydrophobic block, i.e. characterized by a low glass transition temperature, while the other one was made of hydrophilic poly(ethylene glycol) (PEG). The new triblock polymers represent "giant surfactants" according to their molecular architecture. The hydrophobic and hydrophilic blocks microphase separate in the bulk. In aqueous solution, they aggregate into globular micellar aggregates, their size being determined by the length of the stretched polymer molecules. As determined by the combination of various scattering techniques for the dual brush copolymer, a rather compact structure is formed, which is dominated by the large hydrophobic poly(n-butyl acrylate) block. The aggregation number for the dual brush is about 10 times larger than for the "semi-brush" precursor copolymer, due to the packing requirements for the much bulkier hydrophobic core. On mica surfaces the triblock copolymers adsorb with worm-like backbones and stretched out side chains. Y1 - 2011 U6 - https://doi.org/10.1039/c0py00200c SN - 1759-9954 VL - 2 IS - 1 SP - 137 EP - 147 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Lammermann, Anica A1 - Kühn, Heiner T1 - Synthesis and NMR spectra of the syn and anti isomers of substituted cyclobutanes-evidence for steric and spatial hyperconjugative interactions N2 - The syn and anti isomers of cis,cis-tricyclo[5.3.0.0(2.6)]dec-3-ene derivatives have been synthesized and their (1)H and (13)C NMR spectra unequivocally analyzed. Both their structures and their (1)H and (13)C NMR chemical shifts were calculated by DFT, the latter two calculations employing the GIAO perturbation method. Additionally, calculated NMR shielding values were partitioned into Lewis and non-Lewis contributions from the bonds and lone pairs involved in the molecules by accompanying NBO and NCS analyses. The differences between the syn and anti isomers were evaluated with respect to steric and spatial hyperconjugation interactions. Y1 - 2011 SN - 0040-4020 ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Laemmermann, Anica A1 - Kühn, Heiner T1 - Synthesis and NMR spectra of the syn and anti isomers of substituted cyclobutanes-evidence for steric and spatial hyperconjugative interactions JF - Tetrahedron N2 - The syn and anti isomers of cis,cis-tricyclo[5.3.0.0(2.6)]dec-3-ene derivatives have been synthesized and their (1)H and (13)C NMR spectra unequivocally analyzed. Both their structures and their (1)H and (13)C NMR chemical shifts were calculated by DFT, the latter two calculations employing the GIAO perturbation method. Additionally, calculated NMR shielding values were partitioned into Lewis and non-Lewis contributions from the bonds and lone pairs involved in the molecules by accompanying NBO and NCS analyses. The differences between the syn and anti isomers were evaluated with respect to steric and spatial hyperconjugation interactions. KW - Conformational analysis KW - cis,cis-Tricyclo[5.3.0.0(2,6)]dec-3-enes KW - NMR KW - DFT calculation KW - NBO/NCS analysis Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.02.012 SN - 0040-4020 VL - 67 IS - 14 SP - 2596 EP - 2604 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) JF - Chemistry central journal N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ((1)H, (13)C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. Y1 - 2011 U6 - https://doi.org/10.1186/1752-153X-5-23 SN - 1752-153X VL - 5 IS - 17 PB - BioMed Central CY - London ER - TY - JOUR A1 - Csütörtöki, Renáta A1 - Szatmári, István A1 - Koch, Andreas A1 - Heydenreich, Matthias A1 - Kleinpeter, Erich A1 - Fulop, Ferenc T1 - Synthesis and conformational analysis of new naphth[1,2-e][1,3]oxazino[3,4-c]quinazoline derivatives Y1 - 2011 SN - 0040-4020 ER - TY - JOUR A1 - Csuetoertoeki, Renata A1 - Szatmari, Istvan A1 - Koch, Andreas A1 - Heydenreich, Matthias A1 - Kleinpeter, Erich A1 - Fueloep, Ferenc T1 - Synthesis and conformational analysis of new naphth[1,2-e][1,3]oxazino[3,4-c]quinazoline derivatives JF - Tetrahedron N2 - A new highly functionalized aminonaphthol derivative, 1-(amino(2-aminophenyl)methyl)-2-naphthol (4), was synthesized by the reaction of 2-naphthol, 2-nitrobenzaldehyde and tert-butyl carbamate or benzyl carbamate, followed by reduction and/or removal of the protecting group. The aminonaphthol derivative thus obtained was converted in ring-closure reactions with formaldehyde. benzaldehyde and/or phosgene to the corresponding naphth[1,2-e][1,3]oxazino[3,4-c]quinazoline derivatives. The conformational analysis of some derivatives by NMR spectroscopy and accompanying molecular modelling are also reported. KW - Naphthoxazinoquinazolines KW - NMR KW - Conformational analysis KW - DFT calculations KW - Hammett-Brown plots Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.08.074 SN - 0040-4020 VL - 67 IS - 44 SP - 8564 EP - 8571 PB - Elsevier CY - Oxford ER - TY - THES A1 - Schaal, Janina T1 - Synthese und Photochemie von photoaktivierbaren Biomolekülen T1 - Synthesis and photochemistry of photoactivate biomolecules N2 - Mechanistische und kinetische Untersuchungen von komplexen zellulären Prozessen in situ sind in den vergangenen Jahren durch den Einsatz photoaktivierbarer Biomoleküle, sogenannter caged Verbindungen, möglich geworden. Bei den caged Verbindungen handelt es sich um photolabile inaktive Derivate von biologisch aktiven Molekülen, aus denen durch ultraviolettes Licht mit Hilfe einer photochemischen Reaktion die natürliche, biologisch aktive Substanz schnell freigesetzt werden kann. Im Rahmen der vorliegenden Arbeit wurden caged Verbindungen von den Neurotransmittern Octopamin und Dopamin, dem Octopamin-Antagonist Epinastin, den Proteinsyntheseinhibitoren Emetin und Anisomycin, dem Protonophor CCCP und dem Riechstoff Bourgeonal hergestellt. Zur Synthese dieser caged Verbindungen wurden sowohl bekannte als auch verschiedene im Rahmen dieser Arbeit neu entwickelte photolabile Schutzgruppen mit einem (Cumarin-4-yl)methyl- bzw. einem 2-Nitrobenzyl-Gerüst eingesetzt. Entsprechende Syntheseverfahren wurden erarbeitet. Anschließend erfolgte eine umfassende physikalisch-chemische sowie photochemische Charakterisierung der erhaltenen caged Verbindungen. Dabei wurde besonders auf gute Löslichkeit in Wasser bei physiologischer Ionenstärke, schnelle und effiziente Photoreaktivität, hohe Extinktion bei Wellenlängen von 350-430 nm und gute solvolytische Stabilität bei geringer Toxizität der freigesetzten Schutzgruppe geachtet. Ein Schwerpunkt bei der photochemischen Charakterisierung bildeten die Untersuchungen zur Quantifizierung der 2-Photonen-Anregung, uncaging action cross-sections, der Cumarinylmethyl-caged Verbindungen, aufgrund ihrer Bedeutung für die Photofreisetzung von Biomolekülen, da die gleichzeitige Absorption von 2 IR-Photonen eine höhere dreidimensionale Auflösung und eine wesentlich tiefere Gewebepenetration erlaubt. Mit Hilfe von Kooperationspartnern wurden zeitaufgelösten Fluoreszenz- und IR-Messungen an verschiedenen (Cumarin-4-yl)methoxycarbonyl-caged Modellverbindungen durchgeführt, mit denen die Geschwindigkeitskonstanten k1 und kdecarb des Photolysemechanismus ermittelt wurde. Am Ende folgten die Anwendungserprobungen ausgewählter caged Verbindungen in einem Translationsassay bzw. in Zelluntersuchungen. N2 - In the last years mechanistic and kinetic in situ studies of complex cellular processes become possible by employing photoactivate Biomolecules, also called caged compounds, as a tool for these studies. Caged compounds are photolabile inactive derivates of biologic active molecules which are fast laid off the nature biologic active molecule by a photochemical reaction which was triggered by UV-light. In the present dissertation caged compounds of the neurotransmitters octopamine and dopamine, of the octopamine antagonist epinastine, of the proteine synthesis inhibitors emetine and anisomycine, of the ionophore CCCP and of the odorus substance Bourgeonal are synthesized. As precursors for the synthesis of that caged compounds some reported and several in these work newly developed photolabile protecting groups with (coumarin-4-yl)methyl- or 2-nitrobenzyl-scaffold were used. Corresponding Synthesis were designed. Afterwards the received caged compounds were global physical-chemical and photochemical characterised. In favour it was specifically valued for highly water solubility at pH 7,2, fast and efficient photo reactivity, high extinctions at wavelength 350-430 nm, well solvolytic stability and less toxicity of the redundant protecting groups. One key aspect of photochemical characterisation were the studies of uncaging action cross-sections of the coumarinylmethyl-caged molecules, because of their relevance for the photorelease of biomolecules in tissues. The simultaneous absorption of 2 IR-photons allowed highly three-dimensional release and a essentially deeper penetration in tissues. With the aid of co-operation partners were time-released fluorescence- and IR- measurements with several (coumarin-4-yl)methoxycarbonyl-caged molecules realised and therefore the rate constant k1 und kdecarb of the photolyse mechanismus were determined. At the end of the dissertation the achieved caged compounds were testet in translation assays and several cell cultures. KW - organische Chemie KW - caged Verbindungen KW - Cumarin KW - Nitrobenzyl KW - Neurotransmitter KW - organic chemistry KW - caged compounds KW - coumarine KW - nitrobenzyl KW - neurotransmitter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57929 ER - TY - THES A1 - Schwadtke, Ulrike T1 - Synthese und Charakterisierung von partiell fluorierten Blockcopolymeren Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Hölter, Frank T1 - Synthese phenologischer Diazoniumsalze und ihre Anwendung in Palladium-kristalisierten Kupplungsreaktionen Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Geißler, Diana T1 - Synthese funktionalisierter Furane durch Acrylatmethese und Übergangsmetall-katalysierte C-C- Verknüpfungsreaktionen Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Schmidt, Bernd A1 - Hölter, Frank T1 - Suzuki-Miyaura cross coupling reactions with Phenoldiazonium salts JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The Suzuki-Miyaura coupling of phenol diazonium salts and aryl trifluoroborates yields 4-hydroxybiaryls in a protecting group-free synthesis. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob05256j SN - 1477-0520 VL - 9 IS - 13 SP - 4914 EP - 4920 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Tiseanu, Carmen A1 - Parvulescu, Vasile I. A1 - Boutonnet, Magali A1 - Cojocaru, Bogdan A1 - Primus, Philipp A. A1 - Teodorescu, Cristian M. A1 - Solans, Conchita A1 - Sanchez Dominguez, Margarita T1 - Surface versus volume effects in luminescent ceria nanocrystals synthesized by an oil-in-water microemulsion method JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Pure and europium (Eu3+) doped cerium dioxide (CeO2) nanocrystals have been synthesized by a novel oil-in-water microemulsion reaction method under soft conditions. In-situ X-ray diffraction and RAMAN spectroscopy, high-resolution transmission electron microscopy, UV/Vis diffuse-reflectance and Fourier transform infrared spectroscopy as well as time-resolved photoluminescence spectroscopy were used to characterize the nanaocrystals. The as-synthesized powders are nanocrystalline and have a narrow size distribution centered on 3 nm and high surface area of similar to 250 m(2) g(-1). Only a small fraction of the europium ions substitutes for the bulk, cubic Ce4+ sites in the europium-doped ceria nanocrystals. Upon calcination up to 1000 degrees C, a remarkable high surface area of similar to 120 m(2) g (-1) is preserved whereas an enrichment of the surface Ce4+ relative to Ce3+ ions and relative strong europium emission with a lifetime of similar to 1.8 ms and FWHM as narrow as 10 cm(-1) are measured. Under excitation into the UV and visible spectral range, the europium doped ceria nanocrystals display a variable emission spanning the orange-red wavelengths. The tunable emission is explained by the heterogeneous distribution of the europium dopants within the ceria nanocrystals coupled with the progressive diffusion of the europium ions from the surface to the inner ceria sites and the selective participation of the ceria host to the emission sensitization. Effects of the bulk-doping and impregnation with europium on the ceria host structure and optical properties are also discussed. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp21135h SN - 1463-9076 VL - 13 IS - 38 SP - 17135 EP - 17145 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Havelius, Kajsa G. V. A1 - Reschke, Stefan A1 - Horn, Sebastian A1 - Doerlng, Alexander A1 - Niks, Dimitri A1 - Hille, Russ A1 - Schulzke, Carola A1 - Leimkühler, Silke A1 - Haumann, Michael T1 - Structure of the molybdenum site in YedY, a sulfite oxidase homologue from escherichia coli JF - Inorganic chemistry N2 - YedY from Escherichia coil is a new member of the sulfite oxidase family of molybdenum cofactor (Moco)-containing oxidoreductases. We investigated the atomic structure of the molybdenum site in YedY by X-ray absorption spectroscopy, in comparison to human sulfite oxidase (hSO) and to a Mo(IV) model complex. The K-edge energy was indicative of Mo(V) in YedY, in agreement with X- and Q-band electron paramagnetic resonance results, whereas the hSO protein contained Mo(VI). In YedY and hSO, molybdenum is coordinated by two sulfur ligands from the molybdopterin ligand of the Moco, one thiolate sulfur of a cysteine (average Mo-S bond length of similar to 2.4 angstrom), and one (axial) oxo ligand (Mo=O, similar to 1.7 angstrom). hSO contained a second oxo group at Mo as expected, but in YedY, two species in about a 1:1 ratio were found at the active site, corresponding to an equatorial Mo-OH bond (similar to 2.1 angstrom) or possibly to a shorter M-O(-) bond. Yet another oxygen (or nitrogen) at a similar to 2.6 angstrom distance to Mo in YedY was identified, which could originate from a water molecule in the substrate binding cavity or from an amino acid residue close to the molybdenum site, i.e., Glu104, that is replaced by a glycine in hSO, or Asn45. The addition of the poor substrate dimethyl sulfoxide to YedY left the molybdenum coordination unchanged at high pH. In contrast, we found indications that the better substrate trimethylamine N-oxide and the substrate analogue acetone were bound at a similar to 2.6 angstrom distance to the molybdenum, presumably replacing the equatorial oxygen ligand. These findings were used to interpret the recent crystal structure of YedY and bear implications for its catalytic mechanism. Y1 - 2011 U6 - https://doi.org/10.1021/ic101291j SN - 0020-1669 VL - 50 IS - 3 SP - 741 EP - 748 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Früh, Johannes T1 - Structural change of polyelectrolyte multilayers under mechanical stress Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Liang, Hua A1 - Rabe, Jürgen P. T1 - Straightforward access to amphiphilic dual bottle brushes by combining RAFT, ATRP, and NMP polymerization in one sequence JF - Macromolecules : a publication of the American Chemical Society N2 - Molecular brush diblock copolymers were synthesized by the orthogonal overlay of the RAFT (reversible addition-fragmentation chain transfer), the ATRP (atom transfer radical polymerization), and the NMP (nitroxide-mediated polymerization) techniques. This unique combination enabled the synthesis of the complex amphiphilic polymers without the need of postpolymerization modifications, using a diblock copolymer intermediate made from two selectively addressable inimers and applying a sequence of four controlled free radical polymerization steps in total. The resulting polymers are composed of a thermosensitive poly(N-isopropylacrylamide) brush as hydrophilic block and a polystyrene brush as hydrophobic block, thus translating the structure of the established amphiphilic diblock copolymers known as macro surfactants to the higher size level of "giant surfactants". The dual molecular brushes and the aggregates formed on ultra flat solid substrates were visualized by scanning force microscopy (SFM). Y1 - 2011 U6 - https://doi.org/10.1021/ma2015613 SN - 0024-9297 VL - 44 IS - 24 SP - 9635 EP - 9641 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Yin, Jian A1 - Linker, Torsten T1 - Stereoselective diversity-oriented syntheses of functionalized saccharides from bicyclic carbohydrate 1,2-lactones JF - Tetrahedron N2 - Bicyclic carbohydrate 1,2-lactones have been synthesized in only two steps and high yields by saponification and subsequent cyclization from known malonate addition products to glycals. The gluco-configured lactone serves as an important precursor for diversity-oriented syntheses. Thus, stereoselective opening of the lactone ring was realized with various nucleophiles in the presence of Sc(OTf)(3). This enabled the introduction of different substituents at the anomeric position, to afford a broad variety of 1-functionalized carbohydrates. On the other hand, stereoselective alpha-substitution of the gluco-configured lactone with different electrophiles and subsequent ring opening gives a collection of 2-functionalized saccharides. More than 30 products have been isolated in analytically pure form, and their configurations were unequivocally established by various NMR methods. Thus, carbohydrate 1,2-lactones are attractive precursors for the stereoselective synthesis of diverse saccharides. KW - Carbohydrates KW - Lactones KW - Glycosides KW - Molecular diversity KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.01.069 SN - 0040-4020 VL - 67 IS - 13 SP - 2447 EP - 2461 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Kristen-Hochrein, Nora A1 - Laschewsky, André A1 - Miller, Reinhard A1 - von Klitzing, Regine T1 - Stability of foam Films of oppositely charged polyelectrolyte/surfactant mixtures - effect of isoelectric point JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - In the present paper, the influence of the surfactant concentration and the degree of charge of a polymer on foam film properties of oppositely charged polyelectrolyte/surfactant mixtures has been investigated. To verify the assumption that the position of the isoelectric point (IEP) does not change the character of the foam film stabilities, the position of the IEP of the polyelectrolyte/surfactant mixtures has been shifted in two different ways. Within the first series of experiments, the foam. film properties were studied using a fixed surfactant concentration of 3 x 10(-5) M in the mixture. Due to the low surfactant concentration, this is a rather dilute system. In the second approach, a copolymer of nonionic and ionic monomer units was Used to lower the charge density of the polymer. This gave rise to additional interactions between the polyelectrolyte and the surfactant, which makes the description of the foam film behavior more complex. In both systems, the same characteristics of the foam film stabilities were found: The foam film stability is reduced toward the IEP of the system, followed by a destabilization around the IEP., At polyelectrolyte concentrations above the IEP, foam films are very stable. However, the concentration range where unstable films were formed was rather broad, and the mechanisms leading to the destabilization had different origins. The results were compared with former findings on PAMPS/C(14)TAB mixtures with an IEP of 10(-4)M.(1) Y1 - 2011 U6 - https://doi.org/10.1021/jp206964k SN - 1520-6106 VL - 115 IS - 49 SP - 14475 EP - 14483 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Antoniou, Stella A1 - Pashalidis, Ioannis A1 - Gessner, Andre A1 - Kumke, Michael Uwe T1 - Spectroscopic investigations on the effect of humic acid on the formation and solubility of secondary solid phases of Ln(2)(CO3)(3) JF - Journal of rare earths N2 - The formation of secondary Ln(III) solid phases (e.g., Nd-2(CO3)(3) and Sm-2(CO3)(3)) was studied as a function of the humic acid concentration in 0.1 mol/L NaClO4 aqueous solution in the neutral pH range (5-6.5). The solid phases under investigation were prepared by alkaline precipitation under 100% CO2 atmosphere and characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), time-resolved laser fluorescence spectroscopy (TRLFS), diffuse reflectance ultraviolet-visible (DR-UV-Vis), Raman spectroscopy, and solubility measurements. The spectroscopic data obtained indicated that Nd-2(CO3)(3) and Sm-2(CO3)(3) were stable and remained the solubility limiting solid phases even in the presence of increased humic acid concentration (0.5 g/L) in solution. Upon base addition in the Ln(III)-HA system, decomplexation of the previously formed Ln(III)-humate complexes and precipitation of two distinct phases occurred, the inorganic (Ln(2)(CO3)(3)) and the organic phase (HA), which was adsorbed on the particle surface of the former. Nevertheless, humic acid affected the particle size of the solid phases. Increasing humic acid concentration resulted in decreasing crystallite size of the Nd-2(CO3)(3) and increasing crystallite size of the Sm-2(CO3)(3) solid phase, and affected inversely the solubility of the solid phases. However, this impact on the solid phase properties was expected to be of minor relevance regarding the chemical behavior and migration of trivalent lanthanides and actinides in the geosphere. KW - lanthanide ions KW - humic acid KW - solid phase KW - solubility KW - Raman KW - TRLFS KW - DR-UV-Vis KW - rare earths Y1 - 2011 U6 - https://doi.org/10.1016/S1002-0721(10)60490-5 SN - 1002-0721 VL - 29 IS - 6 SP - 516 EP - 521 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ahnert, Karsten A1 - Abel, Markus A1 - Kollosche, Matthias A1 - Jorgensen, Per Jorgen A1 - Kofod, Guggi T1 - Soft capacitors for wave energy harvesting JF - Journal of materials chemistry N2 - Wave energy harvesting could be a substantial renewable energy source without impact on the global climate and ecology, yet practical attempts have struggled with the problems of wear and catastrophic failure. An innovative technology for ocean wave energy harvesting was recently proposed, based on the use of soft capacitors. This study presents a realistic theoretical and numerical model for the quantitative characterization of this harvesting method. Parameter regions with optimal behavior are found, and novel material descriptors are determined, which dramatically simplify analysis. The characteristics of currently available materials are evaluated, and found to merit a very conservative estimate of 10 years for raw material cost recovery. Y1 - 2011 U6 - https://doi.org/10.1039/c1jm12454d SN - 0959-9428 SN - 1364-5501 VL - 21 IS - 38 SP - 14492 EP - 14497 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wischerhoff, Erik A1 - Badi, Nezha A1 - Laschewsky, André A1 - Lutz, Jean-Francois ED - Börner, Hans Gerhard ED - Lutz, JF T1 - Smart polymer surfaces concepts and applications in biosciences JF - Advances in polymer science = Fortschritte der Hochpolymeren-Forschung JF - Advances in Polymer Science N2 - Stimuli-responsive macromolecules (i.e., pH-, thermo-, photo-, chemo-, and bioresponsive polymers) have gained exponential importance in materials science, nanotechnology, and biotechnology during the last two decades. This chapter describes the usefulness of this class of polymer for preparing smart surfaces (e.g., modified planar surfaces, particles surfaces, and surfaces of three-dimensional scaffolds). Some efficient pathways for connecting these macromolecules to inorganic, polymer, or biological substrates are described. In addition, some emerging bioapplications of smart polymer surfaces (e.g., antifouling surfaces, cell engineering, protein chromatography, tissue engineering, biochips, and bioassays) are critically discussed. KW - Antifouling surfaces KW - Bioactive surfaces KW - Biocompatible polymers KW - Bioseparation KW - Cell engineering KW - Polymer-modified surfaces KW - Stimuli-responsive polymers Y1 - 2011 SN - 978-3-642-20154-7 U6 - https://doi.org/10.1007/12_2010_88 SN - 0065-3195 VL - 240 IS - 1 SP - 1 EP - 33 PB - Springer CY - Berlin ER - TY - THES A1 - Berg, John K. T1 - Size-dependent wetting behavior of organic molecules on solid surfaces Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Klinkusch, Stefan T1 - Simulations of laser-induced correlated many-electron dynamics in molecular systems T1 - Simulationen laserinduzierter korrelierter Vielelektronendynamik in molekularen Systemen N2 - In this thesis, simulations of laser-driven many-electron dynamics in molecules are presented, i.e., the interaction between molecules and an electromagnetic field is demonstrated. When a laser field is applied to a molecular system, a population of higher electronic states takes place as well as other processes, e.g. photoionization, which is described by an appropriate model. Also, a finite lifetime of an excited state can be described by such a model. In the second part, a method is postulated that is capable of describing electron correlation in a time-dependent scheme. This is done by introducing a single-electron entropy that is at least temporarily minimized in a further step. N2 - Im Rahmen dieser Doktorarbeit werden Simulationen lasergetriebener Vielelektronendynamik in Molekülen präsentiert, d.h., die Wechselwirkung zwischen Molekülen und einem elektromagnetischen Feld wird demonstriert. Bei Laseranregungen finden nicht nur elektronische Übergänge statt, sondern auch weitere Prozesse wie die Photoionisation, die mit einem geeigneten Modell beschrieben wird. Auch die endliche Lebensdauer angeregter Zustände kann mit einem solchen Modell beschrieben werden. Im zweiten Teil wird eine Methode postuliert, die fähig ist, die Elektronenkorrelation zeitabhängig zu beschreiben. Dies wird durch die Einführung einer Einelektronenentropie erreicht, die in einem weiteren Schritt zumindest kurzzeitig minimiert wird. KW - Elektronendynamik KW - Laserpulse KW - Photoionisation KW - Elektronenkorrelation KW - electron dynamics KW - laser pulses KW - photoionization KW - electron correlation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55445 ER - TY - JOUR A1 - Graf, Philipp A1 - Mantion, Alexandre A1 - Haase, Andrea A1 - Thuenemann, Andreas F. A1 - Masic, Admir A1 - Meier, Wolfgang P. A1 - Luch, Andreas A1 - Taubert, Andreas T1 - Silicification of peptide-coated silver nanoparticles-A biomimetic soft chemistry approach toward chiral hybrid core-shell materials JF - ACS nano N2 - Silica and silver nanoparticles are relevant materials for new applications in optics, medicine, and analytical chemistry. We have previously reported the synthesis of pH responsive, peptide-templated, chiral silver nanoparticles. The current report shows that peptide-stabilized nanoparticles can easily be coated with a silica shell by exploiting the ability of the peptide coating to hydrolyze silica precursors such as TEOS or TMOS. The resulting silica layer protects the nanoparticles from chemical etching, allows their inclusion in other materials, and renders them biocompatible. Using electron and atomic force microscopy, we show that the silica shell thickness and the particle aggregation can be controlled simply by the reaction time. Small-angle X ray scattering confirms the Ag/peptide@silica core-shell structure. UV-vis and circular dichroism spectroscopy prove the conservation of the silver nanoparticle chirality upon silicification. Biological tests show that the biocompatibility in simple bacterial systems is significantly improved once a silica layer is deposited on the silver particles. KW - peptide-templated materials KW - silver nanoparticles KW - chiral nanoparticles KW - Ag/peptide@SiO(2) nanostructures KW - core-shell structures Y1 - 2011 U6 - https://doi.org/10.1021/nn102969p SN - 1936-0851 VL - 5 IS - 2 SP - 820 EP - 833 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Cywinski, Piotr J. A1 - Moro, Artur J. A1 - Ritschel, Thomas A1 - Hildebrandt, Niko A1 - Löhmannsröben, Hans-Gerd T1 - Sensitive and selective fluorescence detection of guanosine nucleotides by nanoparticles conjugated with a naphthyridine receptor JF - Analytical & bioanalytical chemistry N2 - Novel fluorescent nanosensors, based on a naphthyridine receptor, have been developed for the detection of guanosine nucleotides, and both their sensitivity and selectivity to various nucleotides were evaluated. The nanosensors were constructed from polystyrene nanoparticles functionalized by (N-(7-((3-aminophenyl) ethynyl)-1,8-naphthyridin- 2-yl) acetamide) via carbodiimide ester activation. We show that this naphthyridine nanosensor binds guanosine nucleotides preferentially over adenine, cytosine, and thymidine nucleotides. Upon interaction with nucleotides, the fluorescence of the nanosensor is gradually quenched yielding Stern-Volmer constants in the range of 2.1 to 35.9mM(-1). For all the studied quenchers, limits of detection (LOD) and tolerance levels for the nanosensors were also determined. The lowest (3 sigma) LOD was found for guanosine 3',5'-cyclic monophosphate (cGMP) and it was as low as 150 ng/ml. In addition, we demonstrated that the spatial arrangement of bound analytes on the nanosensors' surfaces is what is responsible for their selectivity to different guanosine nucleotides. We found a correlation between the changes of the fluorescence signal and the number of phosphate groups of a nucleotide. Results of molecular modeling and zeta-potential measurements confirm that the arrangement of analytes on the surface provides for the selectivity of the nanosensors. These fluorescent nanosensors have the potential to be applied in multi-analyte, array-based detection platforms, as well as in multiplexed microfluidic systems. KW - Naphthyridine receptor KW - cGMP KW - Base pairing KW - Nucleotide nanosensor KW - Fluorescence spectroscopy Y1 - 2011 U6 - https://doi.org/10.1007/s00216-010-4420-2 SN - 1618-2642 VL - 399 IS - 3 SP - 1215 EP - 1222 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Weiss, Jan A1 - Böttcher, Christoph A1 - Laschewsky, André T1 - Self-assembly of double thermoresponsive block copolymers end-capped with complementary trimethylsilyl groups JF - Soft matter N2 - A set of double thermoresponsive diblock copolymers poly(N-n-propylacrylamide)-block-poly(N-ethylacrylamide) (PNPAM-b-PNEAM) was synthesised by sequential reversible addition-fragmentation chain transfer (RAFT) polymerisations. Using a twofold trimethylsilyl (TMS)-labeled RAFT-agent, the relative size of the two blocks was varied. While soluble as unimers below 15 degrees C, all copolymers exhibited thermally induced two-step self-assembly in water, due to distinct lower critical solution temperature (LCST) phase transitions of PNPAM (around 20 degrees C) and PNEAM (around 70 degrees C). Their temperature-dependent self-organisation in dilute aqueous solution was studied by turbidimetry, dynamic light scattering, transmission electron microscopy, and (1)H NMR spectroscopy. The copolymers show distinct, two-step self-organisation behaviour with respect to transition temperatures, aggregate type and size, which can be correlated to the relative lengths of the low and high LCST blocks. For polymers having short blocks with low LCST, the first thermal transition induces the formation of individual micelles. Further heating above the second thermal transition results reversibly either in a shrink of the micelle size or in aggregation of the micelles, with hydrodynamic diameters below 250 nm. In contrast in the case of polymers having a long block with low LCST, the first thermal transition already leads to clusters of micelles, while the second thermal transition makes the clusters shrink. Noteworthy, the twofold TMS-labeled end groups report not only on the molar masses of the polymers, but can simultaneously serve as NMR-probes for the self-assembly process. The signal of the TMS-aryl end group displays a reversible temperature dependent, two-step splitting that is indicative of the self-organisation of the block copolymers. Y1 - 2011 U6 - https://doi.org/10.1039/c0sm00531b SN - 1744-683X VL - 7 IS - 2 SP - 483 EP - 492 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - ten Brummelhuis, Niels T1 - Self-assembly of cross-linked polymer micelles into complex higher-order aggregates T1 - Selbstorganisation von vernetzten Polymermizellen zu Komplexen Aggregaten mit höherer Ordnung N2 - The creation of complex polymer structures has been one of the major research topics over the last couple of decades. This work deals with the synthesis of (block co-)polymers, the creation of complex and stimuli-responsive aggregates by self-assembly, and the cross-linking of these structures. Also the higher-order self-assembly of the aggregates is investigated. The formation of poly-2-oxazoline based micelles in aqueous solution and their simultaneous functionalization and cross-linking using thiol-yne chemistry is e.g. presented. By introducing pH responsive thiols in the core of the micelles the influence of charged groups in the core of micelles on the entire structure can be studied. The charging of these groups leads to a swelling of the core and a decrease in the local concentration of the corona forming block (poly(2-ethyl-2-oxazoline)). This decrease in concentration yields a shift in the cloud point temperature to higher temperatures for this Type I thermoresponsive polymer. When the swelling of the core is prohibited, e.g. by the introduction of sufficient amounts of salt, this behavior disappears. Similar structures can be prepared using complex coacervate core micelles (C3Ms) built through the interaction of weakly acidic and basic polymer blocks. The advantage of these structures is that two different stabilizing blocks can be incorporated, which allows for more diverse and complex structures and behavior of the micelles. Using block copolymers with either a polyanionic or a polycationic block C3Ms could be created with a corona which contains two different soluble nonionic polymers, which either have a mixed corona or a Janus type corona, depending on the polymers that were chosen. Using NHS and EDC the micelles could easily be cross-linked by the formation of amide bonds in the core of the micelles. The higher-order self-assembly behavior of these core cross-linked complex coacervate core micelles (C5Ms) was studied. Due to the cross-linking the micelles are stabilized towards changes in pH and ionic strength, but polymer chains are also no longer able to rearrange. For C5Ms with a mixed corona likely network structures were formed upon the collapse of the thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm), whereas for Janus type C5Ms well defined spherical aggregates of micelles could be obtained, depending on the pH of the solution. Furthermore it could be shown that Janus micelles can adsorb onto inorganic nanoparticles such as colloidal silica (through a selective interaction between PEO and the silica surface) or gold nanoparticles (by the binding of thiol end-groups). Asymmetric aggregates were also formed using the streptavidin-biotin binding motive. This is achieved by using three out of the four binding sites of streptavidin for the binding of one three-arm star polymer, end-functionalized with biotin groups. A homopolymer with one biotin end-group can be used to occupy the last position. This binding of two different polymers makes it possible to create asymmetric complexes. This phase separation is theoretically independent of the kind of polymer since the structure of the protein is the driving force, not the intrinsic phase separation between polymers. Besides Janus structures also specific cross-linking can be achieved by using other mixing ratios. N2 - In den letzten Jahrzehnten war die Herstellung von komplizierten Polymerstrukturen ein wichtiges Forschungsthema für Polymerchemiker. Diese Arbeit behandelt die Synthese von (Blockco-)Polymere, die Herstellung von komplexen und stimulus-responsiven Aggregaten (Mizellen) durch Selbstorganisation, sowie die Vernetzung dieser Strukturen. Auch die Anordnung dieser Mizellen zu Aggregaten mit höherer Ordnung wurde untersucht. Zum Beispiel wird die Bildung von Poly(2-oxazolin) basierter Mizellen in wässriger Lösung und die gleichzeitige Funktionalisierung und Vernetzung dieser Mizellen mittels Thiol-In-Chemie beschrieben. Durch die Einführung von pH-responsiven Gruppen in den Kern der Mizellen konnte der Einfluss von geladenen Gruppen im Kern auf das gesamte Aggregat untersucht werden. Das Einführen von Ladung führt zum Quellen des Mizellkerns und damit zu einer niedrigeren lokalen Konzentration von wasserlöslichem Poly(2-ethyl-2-oxazolin) (PEtOx). Diese niedrigere Konzentration ergibt eine Verschiebung des Trübungspunkt dieses Typ I thermoresponsiven Polymers zu höheren Temperaturen. Wenn die Ausdehnung des Kerns nicht erfolgt, z.B. in Anwesenheit einer hohen Salzkonzentration, findet dieser Effekt nicht statt. Ähnliche Strukturen können mithilfe von Mizellen mit komplexen Koazervatkern (English: Complex Coacervate Core Micelles, C3Ms) durch die Interaktion zwischen Polymeren mit negativ und positiv geladenen Blöcken hergestellt werden. Der Vorteil dieser Strukturen ist, dass zwei verschiedene stabilisierende Polymerblöcke in einem Aggregat vereint werden können, was zur Bildung einer Vielzahl noch komplizierterer Strukturen und zu mehr Responsivität führen kann. Mithilfe von Blockcopolymeren, bestehend aus jeweils einen polyionischen Block und einem neutralen Block (z.B. PEtOx, PEO oder poly(N-isopropylacrylamid) (PNIPAAm)), konnten C3Ms hergestellt werden, in denen zwei neutrale Polymere vereint wurden. Es konnte gezeigt werden, dass diese Polymere sowohl gemischt als auch phasensepariert vorliegen können (letzteres ergibt Janus Mizellen), abhängig welche Polymere gewählt werden. Durch Vernetzung im Kern konnten die Mizellen stabilisiert und fixiert werden (C5Ms). Die Selbstanordnung dieser vernetzten Mizellen zu größeren Aggregaten wurde untersucht. Wenn eine Lösung mit vernetzten Mizellen über den Trübungspunkt von PNIPAAm erhitzt wurde, bildeten sich Netzwerke aus Mizellen mit einer gemischten Korona, während Janus Mizellen sich zu wohldefinierten Aggregaten höherer Ordnung anordneten. Weiterhin konnte gezeigt werden, dass Janus Mizellen sich auf der Oberfläche von anorganischen Nanopartikeln anlagern können; z.B. durch die selektive Wechselwirkung zwischen PEO und Silica oder durch die Adsorption von Thiolgruppen auf Gold-Nanopartikeln. Asymmetrische Aggregate konnten auch mithilfe des Streptavidin-Biotin Komplexes erhalten werden. Durch das Binden der Biotin-Endgruppen eines dreiarmigen Sternpolymeren an eine Streptavidin-Einheit und anschließende Belegung der verbliebenen Bindungsstelle mit der Biotin-gruppe eines Homopolymers, können sehr spezifisch zwei verschiedene Polymere in einem Janus Aggregat vereint werden. Auch die Vernetzung des Streptavidins kann erzielt werden, indem andere Mischverhältnisse gewählt werden. KW - Polymerchemie KW - Selbstorganisation KW - Mizellen KW - Janus KW - Vernetzung KW - Polymer chemistry KW - self-assembly KW - micelles KW - Janus KW - cross-linking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52320 ER - TY - JOUR A1 - Marsat, Jean-Noel A1 - Heydenreich, Matthias A1 - Kleinpeter, Erich A1 - Berlepsch, Hans V. A1 - Boettcher, Christoph A1 - Laschewsky, André T1 - Self-Assembly into multicompartment micelles and selective solubilization by Hydrophilic-Lipophilic-Fluorophilic block copolymers JF - Macromolecules : a publication of the American Chemical Society N2 - Amphiphilic linear ternary block copolymers (ABC) were synthesized in three consecutive steps by the reversible addition fragmentation chain transfer (RAFT) method. Using oligo(ethylene oxide) monomethyl ether acrylate, benzyl acrylate, and 1H,1H-perfluorobutyl acrylate monomers, the triblock copolymers consist of a hydrophilic (A), a lipophilic (B), and a fluorophilic (C) block. The block sequence of the triphilic copolymers was varied systematically to provide all possible variations: ABC, ACB, and BAC. All blocks have glass transition temperatures below 0 degrees C. Self-assembly into spherical micellar aggregates was observed in aqueous solution, where hydrophobic cores undergo local phase separation into various ultrastructures as shown by cryogenic transmission electron microscopy (cryo-TEM). Selective solubilization of substantial quantities of hydrocarbon and fluorocarbon low molar mass compounds by the lipophilic and fluorophilic block, respectively, is demonstrated. Y1 - 2011 U6 - https://doi.org/10.1021/ma200032j SN - 0024-9297 VL - 44 IS - 7 SP - 2092 EP - 2105 PB - American Chemical Society CY - Washington ER -