TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Liang, Hua A1 - Rabe, Jürgen P. T1 - Straightforward access to amphiphilic dual bottle brushes by combining RAFT, ATRP, and NMP polymerization in one sequence JF - Macromolecules : a publication of the American Chemical Society N2 - Molecular brush diblock copolymers were synthesized by the orthogonal overlay of the RAFT (reversible addition-fragmentation chain transfer), the ATRP (atom transfer radical polymerization), and the NMP (nitroxide-mediated polymerization) techniques. This unique combination enabled the synthesis of the complex amphiphilic polymers without the need of postpolymerization modifications, using a diblock copolymer intermediate made from two selectively addressable inimers and applying a sequence of four controlled free radical polymerization steps in total. The resulting polymers are composed of a thermosensitive poly(N-isopropylacrylamide) brush as hydrophilic block and a polystyrene brush as hydrophobic block, thus translating the structure of the established amphiphilic diblock copolymers known as macro surfactants to the higher size level of "giant surfactants". The dual molecular brushes and the aggregates formed on ultra flat solid substrates were visualized by scanning force microscopy (SFM). Y1 - 2011 U6 - https://doi.org/10.1021/ma2015613 SN - 0024-9297 VL - 44 IS - 24 SP - 9635 EP - 9641 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Heunemann, Peggy A1 - Gradzielski, Michael A1 - Prevost, Sylvain A1 - Liang, Hua A1 - Rabe, Jürgen P. A1 - Lutz, Jean-Francois T1 - Synthesis and self-assembly of amphiphilic semi-brush and dual brush block copolymers in solution and on surfaces JF - Polymer Chemistry N2 - The combination of two techniques of controlled free radical polymerization, namely the reversible addition fragmentation chain transfer (RAFT) and the atom transfer radical polymerization (ATRP) techniques, together with the use of a macromonomer allowed the synthesis of symmetrical triblock copolymers, designed as amphiphilic dual brushes. One type of brush was made of poly(n-butyl acrylate) as soft hydrophobic block, i.e. characterized by a low glass transition temperature, while the other one was made of hydrophilic poly(ethylene glycol) (PEG). The new triblock polymers represent "giant surfactants" according to their molecular architecture. The hydrophobic and hydrophilic blocks microphase separate in the bulk. In aqueous solution, they aggregate into globular micellar aggregates, their size being determined by the length of the stretched polymer molecules. As determined by the combination of various scattering techniques for the dual brush copolymer, a rather compact structure is formed, which is dominated by the large hydrophobic poly(n-butyl acrylate) block. The aggregation number for the dual brush is about 10 times larger than for the "semi-brush" precursor copolymer, due to the packing requirements for the much bulkier hydrophobic core. On mica surfaces the triblock copolymers adsorb with worm-like backbones and stretched out side chains. Y1 - 2011 U6 - https://doi.org/10.1039/c0py00200c SN - 1759-9954 VL - 2 IS - 1 SP - 137 EP - 147 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Zaupa, Alessandro A1 - Neffe, Axel T. A1 - Pierce, Benjamin F. A1 - Lendlein, Andreas A1 - Hofmann, Dieter T1 - A molecular dynamic analysis of gelatin as an amorphous material Prediction of mechanical properties of gelatin systems JF - The international journal of artificial organs N2 - Biomaterials are used in regenerative medicine for induced autoregeneration and tissue engineering. This is often challenging, however, due to difficulties in tailoring and controlling the respective material properties. Since functionalization is expected to offer better control, in this study gelatin chains were modified with physically interacting groups based on tyrosine with the aim of causing the formation of physical crosslinks. This method permits application-specific properties like swelling and better tailoring of mechanical properties. The design of the crosslink strategy was supported by molecular dynamic (MD) simulations of amorphous bulk models for gelatin and functionalized gelatins at different water contents (0.8 and 25 wt.-%). The results permitted predictions to be formulated about the expected crosslink density and its influence on equilibrium swelling behavior and on elastic material properties. The models of pure gelatin were used to validate the strategy by comparison between simulated and experimental data such as density, backbone conformation angle distribution, and X-ray scattering spectra. A key result of the simulations was the prediction that increasing the number of aromatic functions attached to the gelatin chain leads to an increase in the number of physical netpoints observed in the simulated bulk packing models. By comparison with the Flory-Rehner model, this suggested reduced equilibrium swelling of the functionalized materials in water, a prediction that was subsequently confirmed by our experimental work. The reduction and control of the equilibrium degree of swelling in water is a key criterion for the applicability of functionalized gelatins when used, for example, as matrices for induced autoregeneration of tissues. KW - Physical Network KW - Biopolymer material KW - Molecular modeling KW - Gelatin Y1 - 2011 U6 - https://doi.org/10.5301/IJAO.2010.6083 SN - 0391-3988 VL - 34 IS - 2 SP - 139 EP - 151 PB - Wichtig CY - Milano ER - TY - JOUR A1 - Yuan, Jiayin A1 - ten Brummelhuis, Niels A1 - Junginger, Mathias A1 - Xie, Zailai A1 - Lu, Yan A1 - Taubert, Andreas A1 - Schlaad, Helmut T1 - Diversified applications of chemically modified 1,2-Polybutadiene JF - Macromolecular rapid communications N2 - Commercially available 1,2-PB was transformed into a well-defined reactive intermediate by quantitative bromination. The brominated polymer was used as a polyfunctional macroinitiator for the cationic ring-opening polymerization of 2-ethyl-2-oxazoline to yield a water-soluble brush polymer. Nucleophilic substitution of bromide by 1-methyl imidazole resulted in the formation of polyelectrolyte copolymers consisting of mixed units of imidazolium, bromo, and double bond. These copolymers, which were soluble in water without forming aggregates, were used as stabilizers in the heterophase polymerization of styrene and were also studied for their ionic conducting properties. KW - emulsion polymerization KW - polybutadiene KW - polyelectrolytes KW - polymer modification KW - ring-opening polymerization Y1 - 2011 U6 - https://doi.org/10.1002/marc.201100254 SN - 1022-1336 VL - 32 IS - 15 SP - 1157 EP - 1162 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Yin, Jian A1 - Linker, Torsten T1 - Stereoselective diversity-oriented syntheses of functionalized saccharides from bicyclic carbohydrate 1,2-lactones JF - Tetrahedron N2 - Bicyclic carbohydrate 1,2-lactones have been synthesized in only two steps and high yields by saponification and subsequent cyclization from known malonate addition products to glycals. The gluco-configured lactone serves as an important precursor for diversity-oriented syntheses. Thus, stereoselective opening of the lactone ring was realized with various nucleophiles in the presence of Sc(OTf)(3). This enabled the introduction of different substituents at the anomeric position, to afford a broad variety of 1-functionalized carbohydrates. On the other hand, stereoselective alpha-substitution of the gluco-configured lactone with different electrophiles and subsequent ring opening gives a collection of 2-functionalized saccharides. More than 30 products have been isolated in analytically pure form, and their configurations were unequivocally established by various NMR methods. Thus, carbohydrate 1,2-lactones are attractive precursors for the stereoselective synthesis of diverse saccharides. KW - Carbohydrates KW - Lactones KW - Glycosides KW - Molecular diversity KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.01.069 SN - 0040-4020 VL - 67 IS - 13 SP - 2447 EP - 2461 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Yarman, Aysu A1 - Nagel, Thomas A1 - Gajovic-Eichelmann, Nenad A1 - Fischer, Anna A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Bioelectrocatalysis by Microperoxidase-11 in a Multilayer Architecture of Chitosan Embedded Gold Nanoparticles JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - We report on the redox behaviour of the microperoxidase-11 (MP-11) which has been electrostatically immobilized in a matrix of chitosan-embedded gold nanoparticles on the surface of a glassy carbon electrode. MP-11 contains a covalently bound heme c as the redox active group that exchanges electrons with the electrode via the gold nanoparticles. Electroactive surface concentration of MP-11 at high scan rate is between 350+/-50 pmol cm(-2), which reflects a multilayer process. The formal potential (E degrees') of MP-11 in the gold nanoparticles-chitosan film was estimated to be -(267.7+/-2.9) mV at pH 7.0. The heterogeneous electron transfer rate constant (k(s)) starts at 1.21 s(-1) and levels off at 6.45 s(-1) in the scan rate range from 0.1 to 2.0 V s(-1). Oxidation and reduction of MP-11 by hydrogen peroxide and superoxide, respectively have been coupled to the direct electron transfer of MP-11. KW - Microperoxidase KW - Direct electron transfer KW - Nanoparticles KW - Hydrogen peroxide KW - Superoxide KW - Bioelectrocatalysis Y1 - 2011 U6 - https://doi.org/10.1002/elan.201000535 SN - 1040-0397 VL - 23 IS - 3 SP - 611 EP - 618 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Xie, Zai-Lai A1 - White, Robin J. A1 - Weber, Jens A1 - Taubert, Andreas A1 - Titirici, Magdalena M. T1 - Hierarchical porous carbonaceous materials via ionothermal carbonization of carbohydrates JF - Journal of materials chemistry N2 - We report on the ionothermal synthesis of porous carbon materials from a variety of carbohydrate precursors (i.e. D-glucose, D-fructose, D-xylose, and starch) using 1-butyl-3-methylimidazolium tetrachloroferrate(III), [Bmim][FeCl(4)] as a reusable solvent and catalyst. The carbon materials derived from these different carbohydrates are similar in terms of particle size and chemical composition, possessing relatively high surface areas from 44 to 155 m(2) g(-1) after ionothermal processing, which can be significantly increased to > 350 m(2) g(-1) by further thermal treatment (e. g. post-carbonization at 750 degrees C). CO(2) and N(2) sorption analysis, combined with Hg intrusion porosimetry, reveals a promising hierarchical pore structuring to these carbon materials. The ionic liquid [Bmim][FeCl(4)] has a triple role: it acts as both a soft template to generate the characterized pore structuring, solvent and as a catalyst resulting in enhanced ionothermal carbon yields. Importantly from a process point of view, the ionic liquid can be successfully recovered and reused. The current work shows that ionothermal synthesis has the potential to be an effective, low cost, and green reusable synthetic route towards sustainable porous carbon materials. Y1 - 2011 U6 - https://doi.org/10.1039/c1jm00013f SN - 0959-9428 VL - 21 IS - 20 SP - 7434 EP - 7442 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Xie, Zai-Lai A1 - Taubert, Andreas T1 - Thermomorphic behavior of the ionic liquids [C(4)mim][FeCl4] and [C(12)mim][FeCl4] JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The iron-containing ionic liquids 1-butyl-3-methylimidazolium tetrachloroferrate(III) [C(4)mim][FeCl4] and 1-dodecyl-3-methylimidazolium tetrachloroferrate(III) [C(12)mim][FeCl4] exhibit a thermally induced demixing with water (thermomorphism). The phase separation temperature varies with IL weight fraction in water and can be tuned between 100 degrees C and room temperature. The reversible lower critical solution temperature (LCST) is only observed at IL weight fractions below ca. 35% in water. UV/Vis, IR, and Raman spectroscopy along with elemental analysis prove that the yellow-brown liquid phase recovered after phase separation is the starting IL [C(4)mim][FeCl4] and [C(12)mim][FeCl4], respectively. Photometry and ICP-OES show that about 40% of iron remains in the water phase upon phase separation. Although the process is thus not very efficient at the moment, the current approach is the first example of an LCST behavior of a metal-containing IL and therefore, although still inefficient, a prototype for catalyst removal or metal extraction. KW - imidazolium KW - ionic liquids KW - phase transitions KW - Raman spectroscopy KW - thermomorphism Y1 - 2011 U6 - https://doi.org/10.1002/cphc.201000808 SN - 1439-4235 VL - 12 IS - 2 SP - 364 EP - 368 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Wirth, Jonas A1 - Monturet, Serge A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Adsorption and (photo-) electrochemical splitting of water on rutile ruthenium dioxide JF - epl : a letters journal exploring the frontiers of physics N2 - In this work, the adsorption and splitting of the water molecule by light and/or an external potential is investigated in the frame of (photo-) electrochemical cells using a rutile ruthenium dioxide anode. With the help of periodic density functional calculations, the adsorbed structures of H(2)O and some radicals involved in the splitting process (O, OH, OOH) are obtained and compared with the available experimental results. On the basis of these electronic-structure calculations, we use a method to calculate the stability of the reaction intermediates and conclude on the thermodynamical possibility of the water splitting reaction at the surface. We demonstrate that a moderate overpotential of 0.64 V is required for the reaction to take place at the RuO(2)(110) surface. Y1 - 2011 U6 - https://doi.org/10.1209/0295-5075/93/68001 SN - 0295-5075 VL - 93 IS - 6 PB - EDP Sciences CY - Mulhouse ER - TY - JOUR A1 - Wessig, Pablo A1 - Wawrzinek, Robert A1 - Moellnitz, Kristian A1 - Feldbusch, Elvira A1 - Schilde, Uwe T1 - A new class of fluorescent dyes based on 1,3-benzodioxole and [1,3]-dioxolo[4.5-f]benzodioxole JF - Tetrahedron letters N2 - We report on synthesis and photophysical properties of a new class of fluorescent dyes. They are characterized by large Stokes-shifts, long fluorescence lifetimes in organic solvents and a pronounced dependency of the fluorescence lifetime on the solvent polarity. Also worthy of note is the high bleaching stability. To provide access to biochemical and medical applications a series of derivatives were prepared, which exhibit specific reactivity towards different biologically relevant functional groups (carboxylic acids, amines, maleimides, N-hydroxysuccinimide esters). Furthermore, two alkynes were prepared, which could be used in 'Click' chemistry. KW - Fluorescent dyes KW - Fluorescence lifetime KW - Large Stokes-shifts KW - Heterocycles Y1 - 2011 U6 - https://doi.org/10.1016/j.tetlet.2011.09.058 SN - 0040-4039 VL - 52 IS - 46 SP - 6192 EP - 6195 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wessig, Pablo A1 - Pick, Charlotte A1 - Schilde, Uwe T1 - First example of an atropselective dehydro-Diels-Alder (ADDA) reaction JF - Tetrahedron letters N2 - A new concept of a stereoselective synthesis of axially chiral biaryls, formed in the course of the dehydro-Diels-Alder (DDA) reaction, has been disclosed. It is based on asymmetric induction of the newly formed chirality axis by a chirality center, which is present in the two synthesized DDA reactants. Depending on the different length of the linkers joining the alkyne moieties the DDA reaction may be triggered photochemically or thermally, where only the thermal variant was stereoselective. KW - Cycloaddition KW - Atropselecrivity KW - Biaryls KW - Alkynes KW - Photochemistry Y1 - 2011 U6 - https://doi.org/10.1016/j.tetlet.2011.06.024 SN - 0040-4039 VL - 52 IS - 32 SP - 4221 EP - 4223 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wessig, Pablo A1 - Pick, Charlotte T1 - Photochemical synthesis and properties of axially chiral naphthylpyridines JF - Journal of photochemistry and photobiology : A, Chemistry N2 - Five alkynyl pyridines were prepared and cyclized to naphthylpyridines as the main products in the course of a Photo-Dehydro-Diels-Alder reaction. Four of the final products are axially chiral and the determination of the rotational barrier by DFT calculations, dynamic NMR and H PLC experiments is demonstrated. (C) 2011 Elsevier B.V. All rights reserved. KW - Photochemistry KW - Axial chirality KW - Photo-Dehydro-Diels-Alder reaction KW - Dynamic NMR KW - Dynamic HPLC KW - Molecular modeling Y1 - 2011 U6 - https://doi.org/10.1016/j.jphotochem.2011.06.006 SN - 1010-6030 VL - 222 IS - 1 SP - 263 EP - 265 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Wessig, Pablo A1 - Möllnitz, Kristian A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - Crystal structure of 1r,2c,3c,4t,5t,6t-1,2,3,4,5,6-hexakis-trimethylsilanyloxy-cyclohexane, C24H60O6Si6 JF - Zeitschrift für Kristallographie : international journal for structural, physical and chemical aspects of crystalline materials ; New crystal structures N2 - C24H60O6Si6, triclinic, P (1) over bar (no. 2), a = 11.307(2) angstrom, b = 12.159(2) angstrom, = 16.576(2) angstrom, alpha = 109.47(1)degrees, beta = 94.64(1)degrees, gamma = 111.65(1)degrees, V = 1942.3 angstrom(3), Z = 2, R-gt(F) = 0.043, wR(ref)(F-2) = 0.118, T = 210 K. Y1 - 2011 U6 - https://doi.org/10.1524/ncrs.2011.0105 SN - 1433-7266 VL - 226 IS - 2 SP - 228 EP - 230 PB - De Gruyter Oldenbourg CY - München ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika A1 - Pick, Charlotte T1 - The photo-dehydro-Diels-Alder (PDDA) reaction JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The photo-dehydro-Diels-Alder (PDDA) reaction is a valuable extension of the classical Diels-Alder (DA) reaction. The PDDA reaction differs from the DA reaction by the replacement of one of the C-C-double bonds of the diene moiety by a C-C triple bond and by the photochemical triggering of the reaction. This entails that, in contrast to the DA reaction, the PDDA reaction proceeds according to a multistage mechanism with biradicals and cycloallenes as intermediates. The PDDA reaction provides access to a considerable variety of compound classes. For example, 1-phenylnaphthlenes, 1,1'-binaphthyls, N-heterocyclic biaryls, and naphthalenophanes could be obtained by this reaction. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob06066j SN - 1477-0520 VL - 9 IS - 22 SP - 7599 EP - 7605 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika T1 - Preparation of Strained Axially Chiral (1,5)Naphthalenophanes by Photo-dehydro-Diels-Alder Reaction JF - Journal of the American Chemical Society N2 - The preparation of 10 (1,5)naphthalenophanes (10a-j) by photo-dehydro-Diels-Alder (PDDA) reaction is described. Owing to hindered rotation around the biaryl axis, compounds 10 are axially chiral and the separation of enantiomers by chiral HPLC was demonstrated in three cases (10a,b,e). The absolute configuration of the isolated enantiomers could be unambiguously determined by comparison of calculated and measured circular dichroism (CD) spectra. Furthermore, we analyzed ring strain phenomena of (1,5)naphthalenophanes 10. Depending on the length of the linker units, one can distinguish three classes of naphthalenophanes. Compounds 10a-c are highly strained (E-STR = 7-31 kcal/mol), and the strain is caused by small bond angles in the linker unit and deformation of the naphthalene moiety. Another type of strain is observed if the linker unit becomes relatively long (10g,h) originating from transannular interactions and is comparable with the well-known strain of medium sized rings. The naphthalenophanes 10d-f with a linker length of 10-14 atoms are only marginally strained. To clearly discriminate the different sources of strain, we defined two geometrical parameters (average central dihedral angle delta(C) and naphthalene thickness D-N) and demonstrated that they are well-suited to indicate naphthalene deformation of our naphthalenophanes 10 as well as of ten model naphthalenophanes (I-X) with different linker lengths and linking positions. Y1 - 2011 U6 - https://doi.org/10.1021/ja109118m SN - 0002-7863 VL - 133 IS - 8 SP - 2642 EP - 2650 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wellert, Stefan A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Richardt, Andre A1 - Lapp, Alain A1 - Holderer, Olaf A1 - Gaeb, Juergen A1 - Blum, Marc-Michael A1 - Schulreich, Christoph A1 - Stehle, Ralf A1 - Hellweg, Thomas T1 - The DFPase from Loligo vulgaris in sugar surfactant-based bicontinuous microemulsions structure, dynamics, and enzyme activity JF - European biophysics journal : with biophysics letters ; an international journal of biophysics N2 - The enzyme diisopropyl fluorophosphatase (DFPase) from the squid Loligo vulgaris is of great interest because of its ability to catalyze the hydrolysis of highly toxic organophosphates. In this work, the enzyme structure in solution (native state) was studied by use of different scattering methods. The results are compared with those from hydrodynamic model calculations based on the DFPase crystal structure. Bicontinuous microemulsions made of sugar surfactants are discussed as host systems for the DFPase. The microemulsion remains stable in the presence of the enzyme, which is shown by means of scattering experiments. Moreover, activity assays reveal that the DFPase still has high activity in this complex reaction medium. To complement the scattering experiments cryo-SEM was also employed to study the microemulsion structure. KW - Dynamic light scattering KW - Neutron spin echo KW - Microemulsion KW - Enzyme catalysis KW - SANS KW - Protein structure Y1 - 2011 U6 - https://doi.org/10.1007/s00249-011-0689-0 SN - 0175-7571 VL - 40 IS - 6 SP - 761 EP - 774 PB - Springer CY - New York ER - TY - JOUR A1 - Weiss, Jan A1 - Laschewsky, André T1 - Temperature-induced self-assembly of triple-responsive triblock copolymers in aqueous solutions JF - Langmuir N2 - A series of triple-thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (PNPAM, A), poly(methoxydiethylene glycol acrylate) (PMDEGA, B), and poly(N-ethylacrylamide) (PNEAM, C) was synthesized by sequential reversible addition-fragmentation chain transfer polymerizations. Polymers of differing block sequences, ABC, BAC, and ACB, with increasing phase transition temperatures in the order A < B < C were prepared. Their aggregation behavior in dilute aqueous solution was investigated using dynamic light scattering, turbidimetry, and NMR spectroscopy. The self-organization of such polymers was found to dependent strongly on the block sequence. While polymers with a terminal low-LCST (lower critical solution temperature) block undergo aggregation above the first phase transition temperature at 20-25 degrees C, triblock copolymers with the low-LCST block in the middle show aggregation only above the second phase transition. The collapse of the middle block is not sufficient to induce aggregation but produces instead stable, unimolecular micelles with a collapsed middle block, as supported by NMR and fluorescence probe data. Continued heating of all copolymers led to two additional thermal transitions at 40-55 and 70-80 degrees C, which could be correlated to the phase transitions of the B and C blocks, respectively. All polymers show a high tendency for cluster formation, once aggregation is induced. The carrier abilities of the triple responsive triblock copolymers for hydrophobic agents were probed with the solvatochromic fluorescence dye Nile Red. With passing through the first thermal transition, the block copolymers are capable of solubilizing Nile Red. In the case of block copolymers with sequences ABC or ACB, which bear the low-LCST block at one terminus, notable amounts of dye are solubilized already at this stage. In contrast, the hydrophobic probe is much less efficiently incorporated by the BAC triblock copolymer, which forms unimolecular micelles. Only after the collapse of the B block, when reaching the second phase transition at about 45 degrees C, does aggregation occur and solubilization becomes efficient. In the case of ABC and ACB polymers, the hydrophobic probe seems to partition between the originally collapsed A chains and the additional hydrophobic chains formed after the collapse of the less hydrophobic B block. Y1 - 2011 U6 - https://doi.org/10.1021/la200115p SN - 0743-7463 VL - 27 IS - 8 SP - 4465 EP - 4473 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weiss, Jan A1 - Böttcher, Christoph A1 - Laschewsky, André T1 - Self-assembly of double thermoresponsive block copolymers end-capped with complementary trimethylsilyl groups JF - Soft matter N2 - A set of double thermoresponsive diblock copolymers poly(N-n-propylacrylamide)-block-poly(N-ethylacrylamide) (PNPAM-b-PNEAM) was synthesised by sequential reversible addition-fragmentation chain transfer (RAFT) polymerisations. Using a twofold trimethylsilyl (TMS)-labeled RAFT-agent, the relative size of the two blocks was varied. While soluble as unimers below 15 degrees C, all copolymers exhibited thermally induced two-step self-assembly in water, due to distinct lower critical solution temperature (LCST) phase transitions of PNPAM (around 20 degrees C) and PNEAM (around 70 degrees C). Their temperature-dependent self-organisation in dilute aqueous solution was studied by turbidimetry, dynamic light scattering, transmission electron microscopy, and (1)H NMR spectroscopy. The copolymers show distinct, two-step self-organisation behaviour with respect to transition temperatures, aggregate type and size, which can be correlated to the relative lengths of the low and high LCST blocks. For polymers having short blocks with low LCST, the first thermal transition induces the formation of individual micelles. Further heating above the second thermal transition results reversibly either in a shrink of the micelle size or in aggregation of the micelles, with hydrodynamic diameters below 250 nm. In contrast in the case of polymers having a long block with low LCST, the first thermal transition already leads to clusters of micelles, while the second thermal transition makes the clusters shrink. Noteworthy, the twofold TMS-labeled end groups report not only on the molar masses of the polymers, but can simultaneously serve as NMR-probes for the self-assembly process. The signal of the TMS-aryl end group displays a reversible temperature dependent, two-step splitting that is indicative of the self-organisation of the block copolymers. Y1 - 2011 U6 - https://doi.org/10.1039/c0sm00531b SN - 1744-683X VL - 7 IS - 2 SP - 483 EP - 492 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Weigel, A. A1 - Dobryakov, A. A1 - Klaumünzer, Bastian A1 - Sajadi, M. A1 - Saalfrank, Peter A1 - Ernsting, N. P. T1 - Femtosecond stimulated raman spectroscopy of flavin after optical excitation JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - In blue-light photoreceptors using flavin (BLUF), the signaling state is formed already within several 100 ps after illumination, with only small changes of the absorption spectrum. The accompanying structural evolution can, in principle, be monitored by femtosecond stimulated Raman spectroscopy (FSRS). The method is used here to characterize the excited-state properties of riboflavin and flavin adenine dinucleotide in polar solvents. Raman modes are observed in the range 90-1800 cm(-1) for the electronic ground state S-0 and upon excitation to the S-1 state, and modes >1000 cm(-1) of both states are assigned with the help of quantum-chemical calculations. Line shapes are shown to depend sensitively on resonance conditions. They are affected by wavepacket motion in any of the participating electronic states, resulting in complex amplitude modulation of the stimulated Raman spectra. Wavepackets in S-1 can be marked, and thus isolated, by stimulated-emission pumping with the picosecond Raman pulses. Excited-state absorption spectra are obtained from a quantitative comparison of broadband transient fluorescence and absorption. In this way, the resonance conditions for FSRS are determined. Early differences of the emission spectrum depend on excess vibrational energy, and solvation is seen as dynamic Stokes shift of the emission band. The ne state is evidenced only through changes of emission oscillator strength during solvation. S-1 quenching by adenine is seen with all methods in terms of dynamics, not by spectral intermediates. Y1 - 2011 U6 - https://doi.org/10.1021/jp1117129 SN - 1520-6106 VL - 115 IS - 13 SP - 3656 EP - 3680 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weber, Nancy A1 - Tiersch, Brigitte A1 - Unterlass, Miriam M. A1 - Heilig, Anneliese A1 - Tauer, Klaus T1 - "Schizomorphic" Emulsion Copolymerization Particles JF - Macromolecular rapid communications N2 - Cryo-electron microscopy, atomic force microscopy, and light microscopy investigations provide experimental evidence that amphiphilic emulsion copolymerization particles change their morphology in dependence on concentration. The shape of the particles is spherical at solids content above 1%, but it changes to rod-like, ring-like, and web-like structures at lower concentrations. In addition, the shape and morphology of these particles at low concentrations are not fixed but very flexible and vary with time between spheres, flexible pearlnecklace structures, and stretched rods. KW - amphiphilic particles KW - emulsion polymerization KW - morphology Y1 - 2011 U6 - https://doi.org/10.1002/marc.201100491 SN - 1022-1336 VL - 32 IS - 23 SP - 1925 EP - 1929 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Vukicevic, Radovan A1 - Beuermann, Sabine T1 - Fullerenes decorated with poly(vinylidene fluoride) JF - Macromolecules : a publication of the American Chemical Society N2 - Fullerenes decorated with poly(vinylidene fluoride) (PVDF) were synthesized in a three-step procedure: Iodine transfer polymerization of vinylidene fluoride with C(6)F(12)I(2) as the chain transfer agent was carried out in supercritical carbon dioxide to synthesize iodine-terminated PVDF, which was subsequently transformed to azide-terminated polymer. Finally, azide-terminated PVDF chains were attached to a fullerene core under microwave irradiation at 160 degrees C in 1.5 h. The materials were characterized by NMR, FT-IR, UV/vis, GPC, elemental analysis, and DSC. On average, 4-5 PVDF chains are attached to one C(60) moiety. FT-IR spectra and DSC measurements indicate that the polymer end groups strongly affect the crystallinity of the material. For PVDF with azide end groups and PVDF attached to fullerenes the fraction of the beta polymorph is dominant while alpha polymorphs are almost absent. Y1 - 2011 U6 - https://doi.org/10.1021/ma102754c SN - 0024-9297 VL - 44 IS - 8 SP - 2597 EP - 2603 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Vijayakrishnan, Balakumar A1 - Issaree, Arisara A1 - Corilo, Yuri E. A1 - Ferreira, Christina Ramires A1 - Eberlin, Marcos N. A1 - Peter, Martin G. T1 - MSn of the six isomers of (GlcN)(2)(GlcNAc)(2) aminoglucan tetrasaccharides (diacetylchitotetraoses) rules of fragmentation for the sodiated molecules and application to sequence analysis of hetero-chitooligosaccharides JF - Carbohydrate polymers : an international journal devoted to scientific and technological aspects of industrially important polysaccharides N2 - The six possible isomers of di-N-acetylchitotetraoses [AADD, ADDA, ADAD, DADA, DAAD, and DDAA, where D stands for 2-amino-2-deoxy-3-D-glucose (GlcN) and A for 2-acetamido-2-deoxy-beta-D-glucose (GlcNAc)] were analyzed by ESI(+)-MSn. Collision induced dissociation via MSn experiments were performed for the sodiated molecules of m/z 769 [M+Na](+) for each isomer, and fragments were generated mainly by glycosidic bond and cross-ring cleavages. Rules of fragmentation were then established. A reducing end D residue yields the (O.2)A(4) cross-ring [M-59+Na](+) fragment of m/z 710 as the most abundant, whereas isomers containing a reducing end A prefer to lose water to form the [M-18+Na](+) ion of m/z 751, as well as abundant (O.2)A(4) cross-ring [M-101+Na](+) fragments of m/z 668 and B-3 [M-221+Na](+) ions of m/z 548. MS3 of C- and Y-type ions shows analogous fragmentation behaviour that allows identification of the reducing end next-neighbour residue. Due to gas-phase anchimeric assistance, B-type cleavage between the glycosidic oxygen and the anomeric carbon atom is favoured when the glycon is an A residue. Relative ion abundances are generally in the order B >> C > Y, but may vary depending on the next neighbour towards the non-reducing end. These fragmentation rules were used for partial sequence analysis of hetero-chitooligosaccharides of the composition D(2)A(3), D(3)A(3), D(2)A(4), D(4)A(3), and D(3)A(4). KW - Chitosan KW - Fragmentation KW - Oligosaccharides KW - Sequence analysis KW - Tandem mass spectrometry Y1 - 2011 U6 - https://doi.org/10.1016/j.carbpol.2010.04.041 SN - 0144-8617 VL - 84 IS - 2 SP - 713 EP - 726 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Vidadala, Srinivasa Rao A1 - Pimpalpalle, Tukaram M. A1 - Linker, Torsten A1 - Hotha, Srinivas T1 - Gold-Catalyzed reactions of 2-C-Branched carbohydrates mild glycosidations and selective anomerizations JF - European journal of organic chemistry N2 - 2-C-branched methyl glycosides react with various alcohols under gold catalysis to transglycosylated products. The method is applicable for the convenient synthesis of disaccharides. Without nucleophile a selective anomerization occurs, giving first access to alpha-configured 2-C-nitromethyl glycosides. The results are interesting for the mechanism of gold-catalyzed glycosidations. KW - Anomerization KW - Carbohydrates KW - Glycosidation KW - Gold KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201100134 SN - 1434-193X IS - 13 SP - 2426 EP - 2430 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Utecht, Manuel Martin A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Optical absorption and excitonic coupling in azobenzenes forming self-assembled monolayers a study based on density functional theory JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Based on the analysis of optical absorption spectra, it has recently been speculated that the excitonic coupling between individual azobenzene-functionalized alkanethiols arranged in a self-assembled monolayer (SAM) on a gold surface could be strong enough to hinder collective trans-cis isomerization-on top of steric hindrance [Gahl et al., J. Am. Chem. Soc., 2010, 132, 1831]. Using models of SAMs of increasing complexity (dimer, linear N-mers, and two-dimensionally arranged N-mers) and density functional theory on the (TD-) B3LYP/6-31G* level, we determine optical absorption spectra, the nature and magnitude of excitonic couplings, and the corresponding spectral shifts. It is found that at inter-monomer distances of about 20 angstrom and above, TD-B3LYP excitation frequencies (and signal intensities) can be well described by the frequently used point-dipole approximation. Further, calculated blue shifts in optical absorption spectra account for the experimental observations made for azobenzene/gold SAMs, and hint to the fact that they can indeed be responsible for reduced switching probability in densely packed self-assembled structures. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp22793a SN - 1463-9076 VL - 13 IS - 48 SP - 21608 EP - 21614 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Tremblay, Jean Christophe A1 - Klinkusch, Stefan A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Dissipative many-electron dynamics of ionizing systems JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - In this paper, we perform many-electron dynamics using the time-dependent configuration-interaction method in its reduced density matrix formulation (rho-TDCI). Dissipation is treated implicitly using the Lindblad formalism. To include the effect of ionization on the state-resolved dynamics, we extend a recently introduced heuristic model for ionizing states to the rho-TDCI method, which leads to a reduced density matrix evolution that is not norm-preserving. We apply the new method to the laser-driven excitation of H(2) in a strongly dissipative environment, for which the state-resolve lifetimes are tuned to a few femtoseconds, typical for dynamics of adsorbate at metallic surfaces. Further testing is made on the laser-induced intramolecular charge transfer in a quinone derivative as a model for a molecular switch. A modified scheme to treat ionizing states is proposed to reduce the computational burden associated with the density matrix propagation, and it is thoroughly tested and compared to the results obtained with the former model. The new approach scales favorably (similar to N(2)) with the number of configurations N used to represent the reduced density matrix in the rho-TDCI method, as compared to a N(3) scaling for the model in its original form. Y1 - 2011 U6 - https://doi.org/10.1063/1.3532410 SN - 0021-9606 VL - 134 IS - 4 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Tremblay, Jean Christophe T1 - Laser control of molecular excitations in stochastic dissipative media JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - In the present work, ideas for controlling photochemical reactions in dissipative environments using shaped laser pulses are presented. New time-local control algorithms for the stochastic Schrodinger equation are introduced and compared to their reduced density matrix analog. The numerical schemes rely on time-dependent targets for guiding the reaction along a preferred path. The methods are tested on the vibrational control of adsorbates at metallic surfaces and on the ultrafast electron dynamics in a strong dissipative medium. The selective excitation of the specific states is achieved with improved yield when using the new algorithms. Both methods exhibit similar convergence behavior and results compare well with those obtained using local optimal control for the reduced density matrix. The favorable scaling of the methods allows to tackle larger systems and to control photochemical reactions in dissipative media of molecules with many more degrees of freedom. Y1 - 2011 U6 - https://doi.org/10.1063/1.3587093 SN - 0021-9606 VL - 134 IS - 17 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Tiseanu, Carmen A1 - Parvulescu, Vasile I. A1 - Boutonnet, Magali A1 - Cojocaru, Bogdan A1 - Primus, Philipp A. A1 - Teodorescu, Cristian M. A1 - Solans, Conchita A1 - Sanchez Dominguez, Margarita T1 - Surface versus volume effects in luminescent ceria nanocrystals synthesized by an oil-in-water microemulsion method JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Pure and europium (Eu3+) doped cerium dioxide (CeO2) nanocrystals have been synthesized by a novel oil-in-water microemulsion reaction method under soft conditions. In-situ X-ray diffraction and RAMAN spectroscopy, high-resolution transmission electron microscopy, UV/Vis diffuse-reflectance and Fourier transform infrared spectroscopy as well as time-resolved photoluminescence spectroscopy were used to characterize the nanaocrystals. The as-synthesized powders are nanocrystalline and have a narrow size distribution centered on 3 nm and high surface area of similar to 250 m(2) g(-1). Only a small fraction of the europium ions substitutes for the bulk, cubic Ce4+ sites in the europium-doped ceria nanocrystals. Upon calcination up to 1000 degrees C, a remarkable high surface area of similar to 120 m(2) g (-1) is preserved whereas an enrichment of the surface Ce4+ relative to Ce3+ ions and relative strong europium emission with a lifetime of similar to 1.8 ms and FWHM as narrow as 10 cm(-1) are measured. Under excitation into the UV and visible spectral range, the europium doped ceria nanocrystals display a variable emission spanning the orange-red wavelengths. The tunable emission is explained by the heterogeneous distribution of the europium dopants within the ceria nanocrystals coupled with the progressive diffusion of the europium ions from the surface to the inner ceria sites and the selective participation of the ceria host to the emission sensitization. Effects of the bulk-doping and impregnation with europium on the ceria host structure and optical properties are also discussed. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp21135h SN - 1463-9076 VL - 13 IS - 38 SP - 17135 EP - 17145 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Thuenemann, Andreas F. A1 - Klobes, Peter A1 - Wieland, Christoph A1 - Bruzzano, Stefano T1 - On the nanostructure of micrometer-sized cellulose beads JF - Analytical & bioanalytical chemistry N2 - The analysis of the porosity of materials is an important and challenging field in analytical chemistry. The gas adsorption and mercury intrusion methods are the most established techniques for quantification of specific surface areas, but unfortunately, dry materials are mandatory for their applicability. All porous materials that contain water and other solvents in their functional state must be dried before analysis. In this process, care has to be taken since the removal of solvent bears the risk of an incalculable alteration of the pore structure, especially for soft materials. In the present paper, we report on the use of small-angle X-ray scattering (SAXS) as an alternative analysis method for the investigation of the micro and mesopores within cellulose beads in their native, i.e., water-swollen state; in this context, they represent a typical soft material. We show that even gentle removal of the bound water reduces the specific surface area dramatically from 161 to 109 m(2) g(-1) in cellulose bead sample type MT50 and from 417 to 220 m(2) g(-1) in MT100. Simulation of the SAXS curves with a bimodal pore size distribution model reveals that the smallest pores with radii up to 10 nm are greatly affected by drying, whereas pores with sizes in the range of 10 to 70 nm are barely affected. The SAXS results were compared with Brunauer-Emmett-Teller results from nitrogen sorption measurements and with mercury intrusion experiments. KW - Small-angle X-ray scattering KW - Cellulose KW - Mesopores KW - Micropores KW - Porosimetry Y1 - 2011 U6 - https://doi.org/10.1007/s00216-011-5176-z SN - 1618-2642 VL - 401 IS - 4 SP - 1101 EP - 1108 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Thiel, Kerstin A1 - Klamroth, Tillmann A1 - Strauch, Peter A1 - Taubert, Andreas T1 - On the interaction of ascorbic acid and the tetrachlorocuprate ion [CuCl4](2-) in CuCl nanoplatelet formation from an ionic liquid precursor (ILP) JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - The formation of CuCl nanoplatelets from the ionic liquid precursor (ILP) butylpyridinium tetrachlorocuprate [C4Py](2)[CuCl4] using ascorbic acid as a reducing agent was investigated. In particular, electron paramagnetic resonance (EPR) spectroscopy was used to evaluate the interaction between ascorbic acid and the Cu(II) ion before reduction to Cu(I). EPR spectroscopy suggests that the [CuCl4](2-) ion in the neat IL is a distorted tetrahedron, consistent with DFT calculations. Addition of ascorbic acid leads to the removal of one chloride from the [CuCl4](2-) anion, as shown by DFT and the loss of symmetry by EPR. DFT furthermore suggests that the most stable adduct is formed when only one hydroxyl group of the ascorbic acid coordinates to the Cu(II) ion. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp20648f SN - 1463-9076 VL - 13 IS - 30 SP - 13537 EP - 13543 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Stojanovic, Milovan A1 - Markovic, Rade A1 - Kleinpeter, Erich A1 - Baranac-Stojanovic, Marija T1 - endo-Mode cyclizations of vinylogous N-acyliminium ions as a route to the synthesis of condensed thiazolidines Y1 - 2011 SN - 0040-4020 ER - TY - JOUR A1 - Stojanovic, Milovan A1 - Markovic, Rade A1 - Kleinpeter, Erich A1 - Baranac-Stojanovic, Marija T1 - Endo-Mode cyclizations of vinylogous N-acyliminium ions as a route to the synthesis of condensed thiazolidines JF - Tetrahedron N2 - endo-Mode cyclizations of vinylogous N-acyliminium ions incorporating heteroatom-based nucleophiles have been examined as a route to the synthesis of condensed thiazolidines. The scope of these reactions and stereochemical outcome are discussed and explained using quantum chemical calculations. KW - Vinylogous N-acyliminium ion KW - endo-Mode cyclization KW - Condensed thiazolidines KW - Quantum chemical calculations Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.10.011 SN - 0040-4020 VL - 67 IS - 49 SP - 9541 EP - 9554 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Skrabania, Katja A1 - Miasnikova, Anna A1 - Bivigou Koumba, Achille Mayelle A1 - Zehm, Daniel A1 - Laschewsky, André T1 - Examining the UV-vis absorption of RAFT chain transfer agents and their use for polymer analysis JF - Polymer Chemistry N2 - The absorption characteristics of a large set of thiocarbonyl based chain transfer agents (CTAs) were studied by UV-vis spectroscopy in order to identify appropriate conditions for exploiting their absorbance bands in end-group analysis of polymers prepared by reversible addition-fragmentation chain transfer (RAFT) polymerisation. Substitution pattern and solvent polarity were found to affect notably the wavelengths and intensities of the pi-pi*- and n-pi*-transition of the thiocarbonyl bond of dithioester and trithiocarbonate RAFT agents. Therefore, it is advisable to refer in end group analysis to the spectral parameters of low molar mass analogues of the active polymer chain ends, rather than to rely on the specific RAFT agent engaged in the polymerisation. When using appropriate conditions, the quantification of the thiocarbonyl end-groups via the pi-pi* band of the thiocarbonyl moiety around 300-310 nm allows a facile, sensitive and surprisingly precise estimation of the number average molar mass of the polymers produced, without the need of particular end group labels. Moreover, when additional methods for absolute molar mass determination can be applied, the quantification of the thiocarbonyl end-groups by UV-spectroscopy provides a good estimate of the degree of active end group for a given polymer sample. Y1 - 2011 U6 - https://doi.org/10.1039/c1py00173f SN - 1759-9954 VL - 2 IS - 9 SP - 2074 EP - 2083 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Shkilnyy, Andriy A1 - Schöne, Stefanie A1 - Rumplasch, Claudia A1 - Uhlmann, Annett A1 - Hedderich, Annett A1 - Günter, Christina A1 - Taubert, Andreas T1 - Calcium phosphate mineralization with linear poly(ethylene imine) a time-resolved study JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - We have earlier shown that linear poly(ethylene imine) (LPEI) is an efficient growth modifier for calcium phosphate mineralization from aqueous solution (Shkilnyy et al., Langmuir, 2008, 24 (5), 2102). The current study addresses the growth process and the reason why LPEI is such an effective additive. To that end, the solution pH and the calcium and phosphate concentrations were monitored vs. reaction time using potentiometric, complexometric, and photometric methods. The phase transformations in the precipitates and particle morphogenesis were analyzed by X-ray diffraction and transmission electron microscopy, respectively. All measurements reveal steep decreases of the pH, calcium, and phosphate concentrations along with a rapid precipitation of brushite nanoparticles early on in the reaction. Brushite transforms into hydroxyapatite (HAP) within the first 2 h, which is much faster than what is reported, for example, for calcium phosphate precipitated with poly(acrylic acid). We propose that poly(ethylene imine) acts as a proton acceptor (weak buffer), which accelerates the transformation from brushite to HAP by taking up the protons that are released from the calcium phosphate precipitate during the phase transformation. KW - Calcium phosphate KW - Polyethylene imine KW - Mineralization KW - Kinetics Y1 - 2011 U6 - https://doi.org/10.1007/s00396-011-2403-2 SN - 0303-402X VL - 289 IS - 8 SP - 881 EP - 888 PB - Springer CY - New York ER - TY - JOUR A1 - Shainyan, Bagrat A. A1 - Suslova, Elena N. A1 - Kleinpeter, Erich T1 - Conformational analysis of N-phenyl- and N-trifyl-4,4-dimethyl-4-silathiane 1-sulfimides JF - Journal of physical organic chemistry N2 - N-Substituted 4,4-dimethyl-4-silathiane 1-sulfimides Me2Si(sic)S=NSO2R [R- Ph (1), CF3 (2)] were studied experimentally by variable temperature dynamic NMR spectroscopy. Low temperature 13 C NMR spectra of the two compounds revealed the frozen ring inversion process and approximately equal content of the axial and equatorial conformers. Calculations of the 4-silathiane derivatives 1, 2 and the model compound [R Me (3)] as well as their carbon analogs, the similarly N-substituted (sic)S=NSO2R thiane 1-sulfimides [R = Ph (4), CF3 (5), Me (6)] at the DFT/B3LYP/6-311G(d, p) level in the gas phase and in chloroform solution using the PCM model at the same level of theory showed a strong dependence of the relative stability of the conformer on the solvent. The electronegative trifluoromethyl group increases the relative stability of the axial conformer. KW - 4-silathianes KW - conformational analysis KW - dynamic NMR KW - quantum chemical calculations KW - sulfimides Y1 - 2011 U6 - https://doi.org/10.1002/poc.1811 SN - 0894-3230 VL - 24 IS - 8 SP - 698 EP - 704 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Senge, Mathias O. A1 - Ryppa, Claudia A1 - Fazekas, Marijana A1 - Zawadzka, Monika A1 - Dahms, Katja T1 - 5,10-A2B2-Type meso-Substituted PorphyrinsuA Unique Class of Porphyrins with a Realigned Dipole Moment JF - Chemistry - a European journal N2 - Current applications in porphyrin chemistry require the use of unsymmetrically substituted porphyrins. Many current industrial interests in optics and biomedicine require systems with either pushpull (electron-donating and -withdrawing groups) or amphiphilic systems (hydrophobic and hydrophilic groups). In this context we present the class of 5,10-A2B2-type porphyrins for which two different substituents are positioned in diagonally opposite meso positions. Thus, the intramolecular dipole moment in these tetrapyrroles is positioned along a beta-beta vector passing through two pyrrole rings. This is opposite to the situation of the frequently used 5,15-A2BC porphyrins for which the dipole moment is oriented along a mesomeso axis. We have elaborated syntheses of the 5,10-A2B2 porphyrins by using transition-metal-catalyzed transformations of 5,10-A2 porphyrins or direct substitutions reactions thereof; this gives the target molecules in 2277% overall yields. The compounds exhibit interesting structural, spectroscopic, and optical features and can serve as building blocks for new porphyrin arrays and applications. KW - macrocycles KW - nitrogen heterocycles KW - nonlinear optics KW - porphyrinoids KW - tetrapyrroles Y1 - 2011 U6 - https://doi.org/10.1002/chem.201101934 SN - 0947-6539 VL - 17 IS - 48 SP - 13562 EP - 13573 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schreiber, Ulrike A1 - Hosemann, Benjamin A1 - Beuermann, Sabine T1 - 1H,1H,2H,2H-Perfluorodecyl-Acrylate-Containing block copolymers from ARGET ATRP JF - Macromolecular chemistry and physics N2 - Block copolymers of 1H,1H,2H,2H-perfluorodecyl acrylate (AC8) were obtained from ARGET ATRP. To obtain block copolymers of low dispersity the PAC8 block was synthesized in anisole with a CuBr(2)/PMDETA catalyst in the presence of tin(II) 2-ethylhexanoate as a reducing agent. The PAC8 block was subsequently used as macroinitiator for copolymerization with butyl and tert-butyl acrylate carried out in scCO(2). To achieve catalyst solubility in CO(2) two fluorinated ligands were employed. The formation of block copolymers was confirmed by size exclusion chromatography and DSC. KW - atom transfer radical polymerization (ATRP) KW - block copolymers KW - fluoropolymers KW - supercritical carbon dioxide Y1 - 2011 U6 - https://doi.org/10.1002/macp.201000307 SN - 1022-1352 VL - 212 IS - 2 SP - 168 EP - 179 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Staude, Lucia A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - A Cross-Metathesis-Conjugate addition route to enantiopure gamma-Butyrolactams and gamma-Lactones from a C-2-Symmetric Precursor JF - European journal of organic chemistry N2 - A protected derivative of (3R, 4R)-hexa-1,5-diene-3,4-diol, a conveniently accessible C-2-symmetric building block, undergoes single or double cross metathesis with methyl acryl-ate. The cross metathesis products are amenable to stereoselective conjugate addition reactions and can be converted into either gamma-butyrolactones or gamma-lactams. KW - Lactams KW - Lactones KW - Oxygen heterocycles KW - Metathesis KW - Desymmetrization Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201001528 SN - 1434-193X IS - 9 SP - 1721 EP - 1727 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Schmidt, Bernd A1 - Krehl, Stefan T1 - A single precatalyst tandem RCM-allylic oxidation sequence JF - Chemical communications N2 - Ring closing metathesis of allyloxy styrenes and a subsequent Ru-catalyzed allylic oxidation can be combined to a tandem sequence that makes coumarins accessible using less active but more conveniently available first generation catalysts. Y1 - 2011 U6 - https://doi.org/10.1039/c1cc11347j SN - 1359-7345 VL - 47 IS - 20 SP - 5879 EP - 5881 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Schmidt, Bernd A1 - Hölter, Frank T1 - Suzuki-Miyaura cross coupling reactions with Phenoldiazonium salts JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The Suzuki-Miyaura coupling of phenol diazonium salts and aryl trifluoroborates yields 4-hydroxybiaryls in a protecting group-free synthesis. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob05256j SN - 1477-0520 VL - 9 IS - 13 SP - 4914 EP - 4920 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Schmidt, Bernd A1 - Geissler, Diana T1 - Olefin-Metathesis-Based Synthesis of Furans by an RCM/Deprotonation/Phosphorylation Sequence and Their Diels-Alder Reactions JF - European journal of organic chemistry N2 - Butenolides, obtained by ring-closing metathesis (RCM) of acrylates, undergo quantitative deprotonation with amide bases. Trapping of the resulting anions with electrophiles, for example, chlorophosphates, give furans. Subsequent DielsAlder reaction and acid-catalysed rearrangement of the resulting oxabicyclonorbornadienes give substituted benzenes. KW - Lactones KW - Metathesis KW - Ruthenium KW - Oxygen heterocycles KW - Metalation Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201101078 SN - 1434-193X IS - 35 SP - 7140 EP - 7147 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Geissler, Diana T1 - Ru- and Pd-Catalysed Synthesis of 2-Arylfurans by One-Flask Heck Arylation/Oxidation JF - European journal of organic chemistry N2 - 2,5-Disubstituted furans were synthesized by one-flask Heck arylation/oxidation sequences. The starting materials are 2-substituted 2,3-dihydrofurans, conveniently available by RCM/isomerization sequences, and arenediazonium salts. These react in ligand-free Heck reactions to afford 2,5-disub-stituted 2,5-dihydrofurans, which are oxidized to the corresponding furans without isolation or intermediate workup. The oxidation is conveniently achieved with chloranil or DDQ, depending on the substrate. KW - Diazonium salts KW - Palladium KW - C-C coupling KW - Heck coupling KW - Furans KW - Oxidation KW - Oxygen heterocycles Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201100549 SN - 1434-193X IS - 25 SP - 4814 EP - 4822 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Berger, René A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - Pd-Catalyzed [2+2+1] coupling of alkynes and arenes phenol diazonium salts as mechanistic trapdoors JF - Chemistry - a European journal N2 - Alkynes and phenol diazonium salts undergo a Pd-catalyzed [2+2+1] cyclization reaction to spiro[4,5]decatetraene-7-ones. This structure was confirmed for one example by X-ray single-crystal structure analysis. The reaction is believed to proceed through oxidative addition of the phenol diazonium cation to Pd(0), subsequent insertion of two alkynes, followed by irreversible spirocyclization. KW - alkynes KW - diazo compounds KW - palladium KW - phenols KW - spirocycles Y1 - 2011 U6 - https://doi.org/10.1002/chem.201100609 SN - 0947-6539 VL - 17 IS - 25 SP - 7032 EP - 7040 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Riebe, Daniel A1 - Zühlke, Martin A1 - Zenichowski, Karl A1 - Beitz, Toralf A1 - Dosche, Carsten A1 - Löhmannsröben, Hans-Gerd T1 - Characterization of rhodamine 6G release in electrospray ionization by means of spatially resolved fluorescence spectroscopy JF - Zeitschrift für physikalische Chemie : international journal of research in physical chemistry and chemical physics N2 - In the present work, the density distribution of rhodamine 6G ions (R6G) in the gas phase and the droplets of an electrospray plume was studied by spatial and spectral imaging. The intention is to contribute to the fundamental understanding of the release mechanism of gaseous R6G in the electrospray ionization (ESI) process. Furthermore, the influence of ESI-parameters on the release efficiency of R6G, e. g. solvent flow, R6G and salt concentration were examined via direct fluorescence imaging of R6G. A solvent-shift of the fluorescence maximum,lambda(max) = 555 nm in methanolic solution and lambda(max) = 505 nm in gas phase, allows the discrimination between solvated and gaseous R6G. Two experimental setups were used for our measurements. In the first experiment, the R6G fluorescence and the light scattered from the spray plume were imaged in two spatial dimensions using a tunable wavelength filter. The second experiment was designed for obtaining 1-dimensional spatially resolved emission spectra of the spray. Here, the intensity distribution of solvated and gaseous R6G as well as scattered light (lambda = 355 nm) were measured simultaneously. The results show the distribution of gaseous R6G in the plane, orthogonal to the ESI capillary, decreasing slightly towards the spray center and showing maxima at the cone margins. The distribution of gaseous R6G confirms the preferred release of gaseous ions from nano-droplets, indicating the ion evaporation model (IEM) to be the dominating release mechanism. Up to now, only a few fluorescence spectra of ionic compounds in the gas phase were published because the measurement of emission spectra of mass-selected ions in an ion trap is experimentally challenging. The fluorescence spectrum of gaseous lucigenin at atmospheric pressure is reported for the first time. This spectrum of lucigenin in the gas phase exhibits a blue shift of about Delta lambda = 10 nm in comparison to the corresponding spectrum in methanol. KW - Fluorescence KW - Electrospray Ionization KW - Rhodamine 6G KW - Gaseous Ions KW - Lucigenin Y1 - 2011 U6 - https://doi.org/10.1524/zpch.2011.0149 SN - 0942-9352 VL - 225 IS - 9-10 SP - 1055 EP - 1072 PB - De Gruyter Oldenbourg CY - München ER - TY - JOUR A1 - Reznichenko, Alexander L. A1 - Emge, Thomas J. A1 - Audoersch, Stephan A1 - Klauber, Eric G. A1 - Hultzsch, Kai C. A1 - Schmidt, Bernd T1 - Group 5 metal binaphtholate complexes for catalytic asymmetric hydroaminoalkylation and hydroamination/cyclization JF - Organometallics N2 - 3,3'-Silylated binaphtholate tantalum and niobium complexes were shown to be efficient catalysts for the asymmetric hydroaminoalkylation of N-methylaniline derivatives and N-benzylmethylamine with simple alkenes in enantioselectivities of up to 80% ee. No hydroaminoalkylation was observed with aminoalkenes; rather, exclusive asymmetric hydroamination/cyclization took place in up to 81% ee. Y1 - 2011 U6 - https://doi.org/10.1021/om1011006 SN - 0276-7333 VL - 30 IS - 5 SP - 921 EP - 924 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Radziuk, Darya A1 - Skirtach, Andre A1 - Gessner, Andre A1 - Kumke, Michael Uwe A1 - Zhang, Wei A1 - Möhwald, Helmuth A1 - Shchukin, Dmitry T1 - Ultrasonic Approach for Formation of Erbium Oxide Nanoparticles with Variable Geometries JF - Langmuir N2 - Ultrasound (20 kHz, 29 W. cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (mu s) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water. Y1 - 2011 U6 - https://doi.org/10.1021/la203622u SN - 0743-7463 VL - 27 IS - 23 SP - 14472 EP - 14480 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Prieto, Susana A1 - Shkilnyy, Andriy A1 - Rumplasch, Claudia A1 - Ribeiro, Artur A1 - Javier Arias, F. A1 - Carlos Rodriguez-Cabello, Jose A1 - Taubert, Andreas T1 - Biomimetic calcium phosphate mineralization with multifunctional elastin-like recombinamers JF - Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences N2 - Biomimetic hybrid materials based on a polymeric and an inorganic component such as calcium phosphate are potentially useful for bone repair. The current study reports on a new approach toward biomimetic hybrid materials using a set of recombinamers (recombinant protein materials obtained from a synthetic gene) as crystallization additive for calcium phosphate. The recombinamers contain elements from elastin, an elastic structural protein, and statherin, a salivary protein. Via genetic engineering, the basic elastin sequence was modified with the SN(A)15 domain of statherin, whose interaction with calcium phosphate is well-established. These new materials retain the biocompatibility, "smart" nature, and desired mechanical behavior of the elastin-like recombinamer (ELR) family. Mineralization in simulated body fluid (SBF) in the presence of these recombinamers reveals surprising differences. Two of the polymers inhibit calcium phosphate deposition (although they contain the statherin segment). In contrast, the third polymer, which has a triblock structure, efficiently controls the calcium phosphate formation, yielding spherical hydroxyapatite (HAP) nanoparticles with diameters from 1 to 3 nm after 1 week in SBF at 37 degrees C. However, at lower temperatures, no precipitation is observed with any of the polymers. The data thus suggest that the molecular design of ELRs containing statherin segments and the selection of an appropriate polymer structure are key parameters to obtain functional materials for the development of intelligent systems for hard tissue engineering and subsequent in vivo applications. Y1 - 2011 U6 - https://doi.org/10.1021/bm200287c SN - 1525-7797 VL - 12 IS - 5 SP - 1480 EP - 1486 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Prevost, Sylvain A1 - Wattebled, Laurent A1 - Laschewsky, André A1 - Gradzielski, Michael T1 - Formation of monodisperse charged vesicles in mixtures of cationic gemini surfactants and anionic SDS JF - Langmuir N2 - The aggregation behavior of catanionics formed by the mixture of cationic geminis derived from dodecyltrimethylammonium chloride (DTAC) and anionic sodium dodecylsulfate (SDS) was studied by means of phase studies and comprehensive small-angle neutron scattering (SANS) experiments at 25 degrees C and 50 mM overall concentration. The results are compared to those for the previously studied SDS + DTAC system. Various gemini spacers of different natures and geometries were used, but all of them had similar lengths: an ethoxy bridge, a double bond, and an aromatic ring binding the two DTACs in three different substitutions (ortho, meta, and para). SANS and SAXS data analysis indicates that the spacer has no large effect on the spheroidal micelles of pure surfactants formed at low concentration in water; however, specific effects appear with the addition of electrolytes. Microstructures formed in the catanionic mixtures are rather strongly dependent on the nature of the spacer. The most important finding is that for the hydrophilic, flexible ethoxy bridge, monodisperse vesicles with a fixed anionic/cationic charge ratio (depending only on the surfactant in excess) are formed. Furthermore, the composition of these vesicles shows that strongly charged aggregates are formed. This study therefore provides new opportunities for developing tailor-made gemini surfactants that allow for the fine tuning of catanionic structures. Y1 - 2011 U6 - https://doi.org/10.1021/la103976p SN - 0743-7463 VL - 27 IS - 2 SP - 582 EP - 591 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Gharabekyan, Hrant H. A1 - Falkenhagen, Sandra A1 - Koetz, Joachim A1 - Shahinyan, Aram A. T1 - Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC) JF - Journal of colloid and interface science N2 - We have performed a 15 ns molecular dynamics simulation of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of a cationic polyelectrolyte, i.e. poly(diallyldimethylammonium chloride) (PDADMAC). The NAMD code and CHARMM force field were used. During the simulation time, the radii of SOS inverse micelles changed and the radii of the water droplets have been calculated. The behavior of SDS hydrocarbon chains has been characterized by calculating the orientation order parameter and the chain average length. The water droplet properties (water flow, water molecules displacement) have been examined. In summary the MD simulations indicate a more rigid and ordered surfactant film due to the formation of a polyelectrolyte palisade layer in full agreement with the experimental findings, e.g. the viscosity increase and shift of the percolation boundary. KW - Surfactant micelles KW - Molecular dynamics simulations KW - SDS Y1 - 2011 U6 - https://doi.org/10.1016/j.jcis.2011.01.091 SN - 0021-9797 VL - 358 IS - 1 SP - 175 EP - 181 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Pimpalpalle, Tukaram M. A1 - Vidadala, Srinivasa Rao A1 - Hotha, Srinivas A1 - Linker, Torsten T1 - Lewis acid-catalyzed stereoselective lactonization and subsequent glycosidation of 2-C-malonyl carbohydrates JF - Chemical communications N2 - Gold(III) bromide is a suitable catalyst for the stereoselective cyclization of 2-C-malonyl carbohydrates to the anomeric center under retention of one ester group. Reopening of the lactones with alcohols in the presence of TMSOTf affords allyl, propargyl and benzyl glycosides with high alpha-selectivity. Y1 - 2011 U6 - https://doi.org/10.1039/c1cc13425f SN - 1359-7345 VL - 47 IS - 37 SP - 10434 EP - 10436 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Piluso, Susanna A1 - Hiebl, Bernhard A1 - Gorb, Stanislav N. A1 - Kovalev, Alexander A1 - Lendlein, Andreas A1 - Neffe, Axel T. T1 - Hyaluronic acid-based hydrogels crosslinked by copper-catalyzed azide-alkyne cycloaddition with tailorable mechanical properties JF - The international journal of artificial organs N2 - Biopolymers of the extracellular matrix are attractive starting materials for providing degradable and biocompatible biomaterials. In this study, hyaluronic acid-based hydrogels with tunable mechanical properties were prepared by the use of copper-catalyzed azide-alkyne cycloaddition (known as "click chemistry"). Alkyne-functionalized hyaluronic acid was crosslinked with linkers having two terminal azide functionalities, varying crosslinker density as well as the lengths and rigidity of the linker molecules. By variation of the crosslinker density and crosslinker type, hydrogels with elastic moduli in the range of 0.5-4 kPa were prepared. The washed materials contained a maximum of 6.8 mg copper per kg dry weight and the eluate of the gel crosslinked with diazidostilbene did not show toxic effects on L929 cells. The hyaluronic acid-based hydrogels have potential as biomaterials for cell culture or soft tissue regeneration applications. KW - Biomaterial KW - Hydrogel KW - Hyaluronic acid KW - Microindentation KW - Rheology Y1 - 2011 U6 - https://doi.org/10.5301/IJAO.2011.6394 SN - 0391-3988 VL - 34 IS - 2 SP - 192 EP - 197 PB - Wichtig CY - Milano ER -