TY - JOUR A1 - Awad, Duha Jawad A1 - Conrad, Franziska A1 - Koch, Andreas A1 - Friedrich, Alwin A1 - Poeppl, Andreas A1 - Strauch, Peter T1 - 2,2'-Bipyridin-1,2-dithiolat Gemischtligand-Komplexe : Systhese, Charakterisierung und EPR-Spektroskopie N2 - A series of new 2 2'-bipyridine/1 2-dithiolate transition metal complexes has been synthesised and characterised As 1,2-dithiolate ligands 1,2 dithiooxalate (dto) and 1 2-dithiosquarate (dtsq) were used It follows from the IR spectra that the multidentate dithiolate ligands coordinate exclusively via their sulfur atoms forming an MN2S2 coordination sphere The central metal ions (M) are Cu2+ Ni2+ Pd2+ Pt2+, and Zn2+ The complex [Cu-II(bpy)(dto)] could be studied by EPR spectroscopy and was measured as powder diamagnetically diluted in the isostructural [Ni-II(bpy)(dto)] host structure The spin density contribution calculated from the experimental parameters is compared with the electronic situation in the frontier orbitals namely in the semi occupied SOMO of the copper complex derived from quantum chemical calculations on different levels (EHT and DFT) Y1 - 2010 UR - http://www.znaturforsch.com/b.htm SN - 0932-0776 ER - TY - THES A1 - Staude, Lucia T1 - 3R,4R-Hexa-1,5-dien-3,4-diol : ein vielseitiger C2-symmetrischer Baustein in der organischen Synthese Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Zehm, Daniel T1 - Amphiphile Block-Bürstenpolymere : ihre Synthese durch sequentielle Anwendung von CRP-Methoden und ihre Selbstorganisation in ausgewählten Lösungsmitteln Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Lämmermann, Anica T1 - Anwendung von Substituenteneffekten zur Strukturaufklärung mittels NMR-Spektroskopie und Moleculare Modelling Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Luschtinetz, Franziska T1 - Cyaninfarbstoffe als Fluoreszenzsonden in biomimetischen und biologischen Systemen : Fluoreszenz-Korrelations-Spektroskopie und Fluoreszenzanisotropie-Untersuchungen T1 - Cyanine dyes as fluorescent probes in biomimetic and biological systems : fluorescence correlation spectroscopy and fluorescence anisotropy studies N2 - Um Prozesse in biologischen Systemen auf molekularer Ebene zu untersuchen, haben sich vor allem fluoreszenzspektroskopische Methoden bewährt. Die Möglichkeit, einzelne Moleküle zu beobachten, hat zu einem deutlichen Fortschritt im Verständnis von elementaren biochemischen Prozessen geführt. Zu einer der bekanntesten Methoden der Einzelmolekülspektroskopie zählt die Fluoreszenz-Korrelations-Spektroskopie (FCS), mit deren Hilfe intramolekulare und diffusionsgesteuerte Prozesse in einem Zeitbereich von µs bis ms untersucht werden können. Durch die Verwendung von sog. Fluoreszenzsonden können Informationen über deren molekulare Mikroumgebung erhalten werden. Insbesondere für die konfokale Mikroskopie und die Einzelmolekülspektroskopie werden Fluoreszenzfarbstoffe mit einer hohen Photostabilität und hohen Fluoreszenzquantenausbeute benötigt. Aufgrund ihrer hohen Fluoreszenzquantenausbeute und der Möglichkeit, maßgeschneiderte“ Farbstoffe in einem breiten Spektralbereich für die Absorption und Fluoreszenz zu entwickeln, sind Cyaninfarbstoffe von besonderem Interesse für bioanalytische Anwendungen. Als Fluoreszenzmarker finden diese Farbstoffe insbesondere in der klinischen Diagnostik und den Lebenswissenschaften Verwendung. Die in dieser Arbeit verwendeten Farbstoffe DY-635 und DY-647 sind zwei typische Vertreter dieser Farbstoffklasse. Durch Modifizierung können die Farbstoffe kovalent an biologisch relevante Moleküle gebunden werden. Aufgrund ihres Absorptionsmaximums oberhalb von 630nm werden sie insbesondere in der Bioanalytik eingesetzt. In der vorliegenden Arbeit wurden die spektroskopischen Eigenschaften der Cyaninfarbstoffe DY-635 und DY-647 in biomimetischen und biologischen Modellsystemen untersucht. Zur Charakterisierung wurden dabei neben der Absorptionsspektroskopie insbesondere fluoreszenzspektroskopische Methoden verwendet. Dazu zählen die zeitkorrelierte Einzelphotonenzählung zur Ermittlung des Fluoreszenzabklingverhaltens, Fluoreszenz-Korrelations-Spektroskopie (FCS) zur Beobachtung von Diffusions- und photophysikalischen Desaktivierungsprozessen und die zeitaufgelöste Fluoreszenzanisotropie zur Untersuchung der Rotationsdynamik und Beweglichkeit der Farbstoffe im jeweiligen Modellsystem. Das Biotin-Streptavidin-System wurde als Modellsystem für die Untersuchung von Protein-Ligand-Wechselwirkungen verwendet, da der Bindungsmechanismus weitgehend aufgeklärt ist. Nach Bindung der Farbstoffe an Streptavidin wurde eine erhebliche Veränderung in den Absorptions- und Fluoreszenzeigenschaften beobachtet. Es wird angenommen, dass diese spektralen Veränderungen durch Wechselwirkung von benachbarten, an ein Streptavidintetramer gebundenen Farbstoffmolekülen und Bildung von H-Dimeren verursacht wird. Für das System Biotin-Streptavidin ist bekannt, dass während der Bindung des Liganden (Biotin) an das Protein eine Konformationsänderung auftritt. Anhand von zeitaufgelösten Fluoreszenzanisotropieuntersuchungen konnte in dieser Arbeit gezeigt werden, dass diese strukturellen Veränderungen zu einer starken Einschränkung der Beweglichkeit des Farbstoffes DY-635B führen. Liegt eine Mischung von ungebundenem und Streptavidin-gebundenem Farbstoff vor, können die Anisotropieabklingkurven nicht nach einem exponentiellen Verlauf angepasst werden. Es konnte im Rahmen dieser Arbeit gezeigt werden, dass in diesem Fall die Auswertung mit Hilfe des Assoziativen Anisotropiemodells möglich ist, welches eine Unterscheidung der Beiträge aus den zwei verschiedenen Mikroumgebungen ermöglicht. Als zweites Modellsystem dieser Arbeit wurden Mizellen des nichtionischen Tensids Tween-20 eingesetzt. Mizellen bilden eines der einfachsten Systeme, um die Mikroumgebung einer biologischen Membran nachzuahmen. Sind die Farbstoffe in den Mizellen eingelagert, so kommt es zu keiner Veränderung der Mizellgröße. Die ermittelten Werte des Diffusionskoeffizienten der mizellar eingelagerten Farbstoffe spiegeln demzufolge die Translationsbewegung der Tween-20-Mizellen wider. Die Beweglichkeit der Farbstoffe innerhalb der Tween-20-Mizellen wurde durch zeitaufgelöste Fluoreszenzanisotropiemessungen untersucht. Neben der „Wackelbewegung“, entsprechend dem wobble-in-a-cone-Modell, wird zusätzlich noch die laterale Diffusion der Farbstoffe entlang der Mizelloberfläche beschrieben. N2 - To investigate processes in biological systems on a molecular level, particularly fluorescence spectroscopic methods have proven. The possibility to observe single molecules led to significant progress in the understanding of basic biochemical processes. Fluorescence correlation spectroscopy (FCS) is one of the most popular methods of single molecule spectroscopy and is a powerful technique for the investigation of intramolecular and diffusion-controlled processes on a µs to ms time scale. The photophysical characteristics of fluorescent probes are often strongly influenced by their microenvironment. For confocal microscopy and single molecule detection applications fluorescent dyes with properties, such as high photostability and high fluorescence efficiency are highly needed. Due to the high fluorescence efficiency and the high potential to design tailor-made fluorescence probes covering a wide spectral range in absorption and fluorescence, cyanine dyes are highly attractive as fluorescence probes for bioanalytical applications, such as clinical diagnostics and life sciences. The dyes DY-635 and DY-647 are two typical representatives of this class of dyes and can be covalently attached to biologically relevant molecules. Because of their excitation wavelength above 630nm these dyes are especially suited for bioanalytical applications. In this work the spectroscopic properties of DY-635 and DY-647 in biomimetic and biological model systems were studied by absorption and fluorescence spectroscopy techniques: time-correlated single photon counting to determine fluorescence decay behavior, fluorescence correlation spectroscopy (FCS) to observe diffusion and photophysical deactivation processes, and fluorescence anisotropy to study the mobility and rotational behavior of the dyes in the respective model system. The well characterized system biotin-streptavidin was used as a model system for protein-ligand interactions. Binding to streptavidin resulted in significant changes in the steady-state photophysical characteristics of DY-635B and DY-647. These spectral changes are attributed to dye-dye interactions and the formation of H-dimers. Previous studies have demonstrated, that binding of biotin alters the conformation of streptavidin. Based on the evaluation of time-resolved anisotropy data in this study it was shown that these structural changes result in strong hindrance of the rotational freedom of DY-635B. For mixtures of unbound and streptavidin-bound dyes the fluorescence anisotropy decay curves are found to be nonexponential. In this case the concept of an associated anisotropy were applied which allowed discrimination between contributions from different microenvironments. As a second model system, micelles of the nonionic surfactant Tween-20 were used. Micelles are one of the simplest systems to mimic the microenvironment of a biological membrane. Incorporation of the dyes had no effect on the micelle size. The diffusion coefficient of the dyes, obtained by fluorescence correlation spectroscopy (FCS), reflects the translational behavior of Tween-20 micelles. The mobility of the dyes in the Tween-20 micelles was studied by time-resolved fluorescence anisotropy. In addition to a „wobbling“ motion ccording to the wobble-in-a-cone model, a lateral diffusion of the dyes along the micelle surface is described. KW - Cyaninfarbstoffe KW - Fluoreszenz-Korrelations-Spektroskopie KW - Fluoreszenzanisotropie KW - Biotin-Streptavidin KW - Assoziatives Anisotropiemodell KW - cyanine dyes KW - fluorescence correlation spectroscopy KW - fluorescence anisotropy KW - biotin streptavidin KW - associated anisotropy Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-48478 ER - TY - THES A1 - Huber, Christian T1 - Explizit zeitabhängige Configuration-Interaction-Singles und Coupled-Cluster-Singles-Doubles Rechnungen zur laserinduzierten Vielelektronendynamik Y1 - 2010 CY - Potsdam ER - TY - JOUR A1 - Hass, Roland A1 - Munzke, Dorit A1 - Reich, Oliver T1 - Inline-Partikelgroeßenmesstechniken fuer Suspensionen und Emulsionen N2 - Die Inline-Bestimmung von Teilchengroeßen in Emulsionen und Suspensionen stellt besondere Anforderungen an die Messtechnik, da auch bei sehr hohen Teilchenkonzentrationen im Prozess verduennungsfreie Analytik betrieben werden soll. Neben einer Klaerung der Begriffe atline, online und in-line gibt der Beitrag eine Einfuehrung in die mathematische Beschreibung von Groeßenverteilungen. Als Inline-Techniken werden Photonendichtewellen-Spektroskopie, Focused Beam Reflectance Measurement und Ultraschallextinktion-Spektroskopie diskutiert und ihre sehr unterschiedlichen physikalischen Messprinzipien erlaeutert. Auch wird kurz erklaert, wie Teilchengroeßen aus den Messresultaten erhalten werden. Die wesentlichen Charakteristika dieser drei Methoden werden abschließend im ueberblick dargestellt. Y1 - 2010 UR - http://www3.interscience.wiley.com/cgi-bin/jhome/60500203/ U6 - https://doi.org/10.1002/cite.200900172 SN - 0009-286X ER - TY - THES A1 - Eidner, Sascha T1 - Lanthanoide als Luminezenzsonden in aquatischen Systemen : Modellsysteme zur Beschreibung der Wechselwirkungen von Metallionen mit natürlicher organischer Materie Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Kühnle, Hans-Jochen T1 - Modifizierte Polymer-Peptid-Konjugate : Regulative Strategien für die Mikrostrukturbildung und Anwendung Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Ott, Patrick T1 - Neue kovalent vernetzbare Polyelektrolytmultischichtsysteme Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Rasch, Claudia T1 - Optische Spektroskopie zum Nachweis von Schimmelpilzen und deren Mykotoxine T1 - Optical spectroscopy for the determination of mould and mycotoxins N2 - Gesunde sowie qualitativ hochwertige Nahrungsmittel sind wichtige Voraussetzungen, um einerseits die Lebensmittelsicherheit entlang der Wertschöpfungskette (Wachstum, Verarbeitung, Lagerung und Transport) und andererseits einen vorbeugenden Verbraucherschutz zu gewährleisten. Die Belastung der Nahrung mit Rückständen jeglicher Art war in letzter Zeit häufig Mittelpunkt heftiger öffentlicher Diskussionen. Zahlreiche Untersuchungen haben gezeigt, dass unter bestimmten Bedingungen durch Pilze gebildete Giftstoffe, so genannte Mykotoxine, die Ernteprodukte belasten und es bei deren Verzehr durch Menschen oder Tiere zu Vergiftungen kommen kann. Die FAO schätzt, dass etwa 25% der Weltproduktion von Nahrungsmitteln mit Mykotoxinen kontaminiert und in 20% der Getreideernte der Europäischen Union messbare Konzentrationen an Mykotoxinen detektierbar sind. Damit die Lebensmittelsicherheit weiterhin gewährleistet bleibt, werden neben den Routinemethoden schnellere und zerstörungsfreie Methoden benötigt, um die Lebensmittel direkt vor Ort auf Schimmelpilze und deren Mykotoxine zu untersuchen. In dieser Arbeit wird das Potenzial von ausgewählten optisch-basierten spektroskopischen Methoden für die in-situ bzw. in-line Detektion von Schimmelpilzen sowie Mykotoxinen in Getreide(produkten) untersucht. Es werden Absorptions- und Reflexionsmethoden einerseits und Fluoreszenztechniken andererseits eingesetzt. Die spektroskopischen Methoden werden dabei auf Proben unterschiedlicher Komplexität angewandt - beginnend mit der Untersuchung der photophysikalischen Eigenschaften der reinen Mykotoxine in Lösung über künstlich mit verschiedenen Mykotoxinen kontaminierten Getreideproben bis hin zu mit Pilzen befallenem Getreide und hochveredelte Lebensmittel (Wein und Bier) als Proben höchster Komplexität. N2 - Problems of food safety have led to an increasing concern regarding contamination of foods and feeds with mycotoxins and the relevant toxigenic fungi, mainly Aspergillus, Penicillium and Fusarium genera. There is a real need for rapid, sensitive and inexpensive sensors for the detection of toxigenic fungi and mycotoxins, both in the field and after harvest in order to obtain real-time monitoring data on contamination and this assist in food safety assessment. This will result in an enormous cost saving to the farmers as well as to agro-food industry through the prevention and reduction of product recalls and reduced treatment costs. The German Ministry of Education and Research (BMBF) has provided funding of more than 1.9 million Euros from July 2006 to December 2009 for the large joint project "ProSeso.net2" on the development of innovative sensor-based techniques and processes in the field of food quality and safety. In this research-project "Exploration of sustainability potentials by use of sensor-based technologies and integrated assessment models in the production chain of plant related food" 13 partners from universities, non-university institutions and industry cooperate within seven subprojects. The expected results shall contribute to maintain freshness and improve safety of the food production chain. In the subproject “Indicators and sensor technology for the identification of mycotoxin producing fungi in the processing of grain” spectroscopic methods are tested for in-situ and in-line detection of moulds and/or mycotoxins. This presentation focuses on some possible spectroscopic methods for the rapid detection of mycotoxins and fungi on grains. Methods based on one- and two-photon-induced fluorescence spectroscopy are highly attractive because of their outstanding sensitivity and selectivity. In order to utilize a fluorescence technique for the analysis of the mycotoxins in food and feedstuff as well as for basic research on the fungal metabolism, the photochemistry and photophysics of the mycotoxins and fungi need to be elucidated in detail, especially the influence of solvent parameters such as polarity and pH value. Consequently, for a sensitive and selective spectroscopic analysis, it is indispensable to take the specific photophysic of the known mycotoxins into account in order to minimize serious limitations upon sensitivity, selectivity, and accuracy of a potential fluorescence-based sensing application. The spectroscopic techniques are complemented by chemometric tools (Principle Component Analysis) to extract the desired chemical information, e.g. with respect to presence of contaminations. The combination of data obtained from different spectroscopic methods (such as optimal excitation and emission wavelength, fluorescence decay times, and fluorescence quantum efficiency) on the one hand side and NIR spectroscopy on the other side shows promising results for the qualitative as well as quantitative identification of mycotoxins grains. Moreover, NIR reflectance spectra yield additional information on ingredients, moisture content, and the presence (or absence) of fungi in the sample. KW - Mykotoxine KW - Schimmelpilze KW - Fluoreszenz KW - Chemometrie KW - Zweiphotonenanregung KW - mycotoxins KW - mould KW - fluorescence KW - chemometrics KW - Two-Photon-Absorption Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-50746 ER - TY - THES A1 - Verch, Andreas T1 - Pränukleationscluster und ihre Wechselwirkungen mit Additiven Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Thesen, Manuel Wolfram T1 - Synthese und Charakterisierung von phosphoreszenten Terpolymeren und nichtkonjugierten Matrixpolymeren für effiziente polymere Leuchtdioden T1 - Synthesis and characterization of phosphoreszent terpolymers and nonconjugated matrixpolymers for efficient polymer light emitting diodes N2 - Mit Seitenkettenpolystyrenen wurde ein neues Synthesekonzept für phosphoreszente polymere LED-Materialien aufgestellt und experimentell verifiziert. Zunächst erfolgten auf Grundlage strukturell einfacher Verbindungen Untersuchungen zum Einfluss von Spacern zwischen aktiven Seitengruppen und dem Polystyrenrückgrat. Es wurden Synthesemethoden für die Monomere etabliert, durch die aktive Elemente - Elektronen- und Lochleiter - mit und ohne diesen Spacer zugänglich sind. Durch Kombination dieser Monomere waren unter Hinzunahme von polymerisierbaren Iridium-Komplexen in unterschiedlicher Emissionswellenlänge statistische Terpolymere darstellbar. Es wurde gezeigt, dass die Realisierung bestimmter Verhältnisse zwischen Loch-, Elektronenleiter und Triplettemitter in ausreichender Molmasse möglich ist. Die Glasstufen der Polymere zeigten eine deutliche Strukturabhängigkeit. Auf die Lage der Grenzorbitale übten die Spacer nahezu keinen Einfluss aus. Die unterschiedlichen Makromoleküle kamen in polymeren Licht emittierenden Dioden (PLEDs) zum Einsatz, wobei ein deutlicher Einfluss der Spacereinheiten auf die Leistungscharakteristik der PLEDs festzustellen war: Sowohl Effizienz, Leuchtdichte wie auch Stromdichte waren durch den Einsatz der kompakten Makromoleküle ohne Spacer deutlich höher. Diese Beobachtungen begründeten sich hauptsächlich in der Verwendung der aliphatischen Spacer, die den Anteil im Polymer erhöhten, der keine Konjugation und damit elektrisch isolierende Eigenschaften besaß. Diese Schlussfolgerungen waren mit allen drei realisierten Emissionsfarben grün, rot und blau verifizierbar. Die besten Messergebnisse erzielte eine PLED aus einem grün emittierenden und spacerlosen Terpolymer mit einer Stromeffizienz von etwa 28 cd A-1 (bei 6 V) und einer Leuchtdichte von 3200 cd m-2 (bei 8 V). Ausgehend von obigen Ergebnissen konnten neue Matrixmaterialien aus dem Bereich verdampfbarer Moleküle geringer Molmasse in das Polystyrenseitenkettenkonzept integriert werden. Es wurden Strukturvariationen sowohl von loch- wie auch von elektronenleitenden Verbindungen als Homopolymere dargestellt und als molekular dotierte Systeme in PLEDs untersucht. Sieben verschiedene lochleitende Polymere mit Triarylamin-Grundkörper und drei elektronendefizitäre Polymere auf der Basis von Phenylbenzimidazol konnten erfolgreich in den Polymeransatz integriert werden. Spektroskopische und elektrochemische Untersuchungen zeigten kaum eine Veränderung der Charakteristika zwischen verdampfbaren Molekülen und den dargestellten Makromolekülen. Diese ladungstransportierenden Makro-moleküle wurden als polymere Matrizes molekular dotiert und lösungsbasiert zu Einschicht-PLEDs verarbeitet. Als aussichtsreichstes Lochleiterpolymer dieser Reihe, mit einer Strom-effizenz von etwa 33 cd A-1 (bei 8 V) und einer Leuchtdichte von 6700 cd m-2 (bei 10 V), stellte sich ein Triarylaminderivat mit Carbazolsubstituenten heraus. Als geeignetstes Matrixmaterial für die Elektronenleitung wurde ein meta-verknüpftes Di-Phenylbenzimidazol ausfindig gemacht, das in der PLED eine Stromeffizienz von etwa 20 cd A-1 (bei 8 V) und eine Leuchtdichte von 7100 cd m-2 (bei 10 V) erzielte. Anschließend wurden die geeignetsten Monomere zu Copolymeren kombiniert: Die lochleitende Einheit bildete ein carbazolylsubstituiertes Triarylamin und die elektronen-leitende Einheit war ein disubstituiertes Phenylbenzimidazol. Dieses Copolymer diente im Folgenden dazu, PLEDs zu realisieren und die Leistungsdaten mit denen eines Homopolymer-blends zu vergleichen, wobei der Blend die bessere Leistungscharakteristik zeigte. Mit dem Homopolymerblend waren Bauteileffizienzen von annähernd 30 cd A-1 (bei 10 V) und Leuchtdichten von 6800 cd m-2 neben einer Verringerung der Einsatzspannung realisierbar. Für die abschließende Darstellung bipolarer Blockcopolymere wurde auf die Nitroxid-vermittelte Polymerisation zurückgegriffen. Mit dieser Technik waren kontrollierte radikalische Polymersiationen mit ausgewählten Monomeren in unterschiedlichen Block-längen durchführbar. Diese Blockcopolymere kamen als molekular dotierte Matrizes in phosphoreszenten grün emittierenden PLEDs zum Einsatz. Die Bauteile wurden sowohl mit statistischen Copolymeren, wie auch mit Homopolymerblends in gleicher Zusammensetzung aber unterschiedlichem Polymerisationsgrad hinsichtlich der Leistungscharakteristik verglichen. Kernaussage dieser Untersuchungen ist, dass hochmolekulare Systeme eine bessere Leistungscharakteristik aufweisen als niedermolekulare Matrizes. Über Rasterkraft-mikroskopie konnte eine Phasenseparation in einem Größenbereich von etwa 10 nm für den hochmolekularen Homopolymerblend nachgewiesen werden. Für die Blockcopolymere war es nicht möglich eine Phasenseparation zu beobachten, was vorwiegend auf deren zu geringe Blocklänge zurückgeführt wurde. N2 - A new synthetic approach for the synthesis of side chain polystyrenes was established and their use as phosphorescent polymers for polymer light emitting diodes (PLEDs) is shown by experiments. An assay was introduced to clarify influences on electroluminescent behavior for RGB-colored phosphorescent terpolymers with N,N-Di-p-tolyl-aniline as hole-transporting unit, 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (tert-BuPBD) as electron-transporting unit, and different iridium complexes in RGB-colors as triplet emitting materials. All monomers were attached with spacer moieties to the “para” position of a polystyrene. PLEDs were built to study the electro-optical behavior of these materials. The gist was a remarkable influence of hexyl-spacer units to the PLED performance. For all three colors only very restricted PLED performances were found. In comparison RGB-terpolymers were synthesized with directly attached charge transport materials to the polymer backbone. For this directly linked systems efficiencies were 28 cd A−1 @ 6 V (green), 4.9 cd A−1 @ 5 V (red) and 4.3 cd A−1 @ 6 V (bluish). In summary it is assumed that an improved charge percolation pathways regarding to the higher content of semiconducting molecules and an improved charge transfer to the phosphorescent dopand in the case of the copolymers without spacers are responsible for the better device performance comparing the copolymers with hexyl spacers. It was found that the approach of the directly connected charge transport materials at the nonconjugated styrene polymer backbone is favored for further investigations as shown in the following. A series of styrene derived monomers with triphenylamine-based units, and their polymers have been synthesized and compared with the well-known structure of polymer of N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine with respect to their hole-transporting behavior in PLEDs. A vinyltriphenylamine structure was selected as a basic unit, functionalized at the para positions with the following side groups: diphenylamine, 3-methylphenyl-aniline, 1- and 2-naphthylamine, carbazole, and phenothiazine. The polymers are used in PLEDs as host polymers for blend systems. It is demonstrated that two polymers are excellent hole-transporting matrix materials for these blend systems because of their good overall electroluminescent performances and their comparatively high glass transition temperatures. For the carbazole-substituted polymer (Tg = 246 °C), a luminous efficiency of 35 cd A−1 and a brightness of 6700 cd m−2 at 10 V is accessible. The phenothiazine-functionalized polymer (Tg = 220 °C) shows nearly the same outstanding PLED behavior. Hence, both these polymers outperform the well-known polymer of N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine, showing only a luminous efficiency of 7.9 cd A−1 and a brightness of 2500 cd m−2 (10 V). Furthermore, novel styrene functionalized monomers with phenylbenzo[d]imidazole units and the corresponding homopolymers are prepared. The macromolecules are used as matrices for phosphorescent dopants to prepare PLEDs. The devices exhibit current efficiencies up to 38.5 cd A−1 at 100 cd m−2 and maximum luminances of 7400 cd m−2 at 10 V. Afterwards the most efficient monomers of this investigations were combined and statistical copolymers were synthesized. As hole-transporting monomer the carbazole substituted triarylamine and as electron-transporting monomer a disubstituted phenylbenzoimidazole was selected. This statistical copolymer was used in the following as matrix material for phosporescent PLEDs and the device performance was compared with a matrix system of a polymer blend matrix system of corresponding homopolymers. With this homopolymer blend efficiencies of about 30 cd A-1 at 10 V and luminances of 6800 cd m-2 beside a decreased onset voltage were realized. Finally bipolar blockcopolymers of structural basic monomers were synthesized via nitroxide mediated polymerization. With these technique and the chosen hole- and electron-transporting monomers a controlled radical polymerization was realized leading to blockcopolymers in different block lengths. These blockcopolymers were used as molecular doped matrix systems in green phosphoreszent PLEDs. The devices were compared in regard to their performances with PLEDs made of statistical copolymers and homopolymer blends. It was found that high molecular systems show a better device performance compared to low molecular polymer matrices. With atomic force microscopy it is shown that a phase separation takes place for the high molecular blend of homopolymers. For the synthesized blockcopolymers no phase separation could be verified, mainly because of the comparatively low molecular weight of these systems. KW - phosphoreszente Terpolymere KW - Elektrolumineszenz KW - organische Licht emittierende Diode KW - Ladungstransport KW - bipolare Blockcopolymere KW - phosphorescent Terpolymers KW - electroluminsecence KW - organic light emitting diode KW - charge transport KW - bipolar blockcopolymers Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51709 ER - TY - THES A1 - Kleineidam, Anja Melanie T1 - Sythese und Verhalten von abbaubaren Fluortensiden Y1 - 2010 CY - Potsdam ER -