TY - THES A1 - Sand, Patrick T1 - Übergangsmetallkatalysierte Funktionalisierungsreaktionen an Vinylsulfonylverbindungen T1 - Transition metal catalysed functionalisation of vinyl sulfonyl compounds N2 - Innerhalb dieser Arbeit erfolgte die erstmalige systematische Untersuchung von Vinylsulfonsäureethylester (1a), Phenylvinylsulfon (1b), N-Benzyl-N-methylethensulfonamid (1c) in der FUJIWARA-MORITANI Reaktion (alternativ als DHR bezeichnet). Bei dieser übergangsmetallkatalysierten Reaktion erfolgt der Aufbau einer neuen C-C-Bindung unter der doppelten Aktivierung einer C-H-Bindung. Somit kann ein atomökonomischer Aufbau von Molekülen realisiert werden, da keine Beiprodukte in Form von Salzen entstehen. Als aromatischer Reaktant wurden Acetanilide (2) verwendet, damit eine regiospezifische Kupplung durch die katalysatordirigierende Acetamid-Gruppe (CDG) erfolgt. Für die Pd-katalysierte DHR wurde eine umfangreiche Optimierung durchgeführt und anschließend konnten neun verschieden, substituierte 2 mit 1a und sieben verschieden, substituierte 2 mit 1b funktionalisiert werden. Da eine Reaktion mit 1c ausblieb, erfolgte ein Wechsel auf eine Ru-katalysierte Methode für die DHR. Mit dieser Methode konnte 1c mit Acetaniliden funktionalisiert werden und das Spektrum der verwendeten 2, in Form von deaktivierenden Substituenten erweitert werden. Im Anschluss wurden die sulfalkenylierten Acetanilide in weiterführenden Reaktionen untersucht. Hierfür wurde eine Reaktionssequenz bestehend aus einer DeacetylierungDiazotierung-Kupplungsreaktion verwendet, um die Acetamid-Gruppe in eine Abgangsgruppe zu überführen und danach in einer MATSUDA-HECK Reaktion zu kuppeln. Mit dieser Methode konnten mehrere 1,2-Dialkenylbenzole erhalten werden und die CDG ein weiteres Mal genutzt werden. Neben der Überführung der CDG in eine Abgangsgruppe konnte diese auch in die Synthese verschiedener Heterozyklen integriert werden. Dafür erfolgte zunächst eine 1,3-Zykloaddition durch deprotonierten Tosylmethylisocanid an der elektronenarmen Sulfalkenylgruppe zur Synthese von Pyrrolen. Anschließend erfolgte eine Kupplung der PyrrolFunktion und der CDG durch Zyklokondensation, wodurch Quinoline dargestellt wurden. Durch diese Synthesen konnten Schwefelanaloga des Naturstoffes Marinoquionolin A erhalten werden. Ein weitere übergangsmetallkatalysierte C-H-Aktivierungsreaktion, die MATSUDA-HECK Reaktion, wurde genutzt, um 1b zu mit verschieden, subtituierten Diazoniumsalzen zu arylieren. Hier konnten zahlreichen Styrenylsulfone erhalten werden. Der erfolgreiche Einsatz der Vinylsulfonylverbindungen in der Kreuzmetathese konnte innerhalb dieser Arbeit nicht erreicht werden. Daher erfolgte die Synthese verschiedener dialkenylierter Sulfonamide. Hierfür wurde die Kettenlänge der Alkenyl-Gruppe am Schwefel zwischen 2-3 und am Stickstoff zwischen 3-4 variiert. Der Einsatz der dialkenylierten Sulfonamide erfolgte in den zuvor untersuchten C-H-Aktivierungsmethoden. N-Allyl-N-phenylethensulfonamid (3) konnte erfolgreich in der DHR und HECK Reaktion funktionalisiert werden. Hierbei erfolgte eine methodenspezifische Kupplung in Abhängigkeit von der Elektronendichte der entsprechenden Alkenyl-Gruppe. Die DHR führte zur selektiven Arylierung der Vinyl-Gruppe und die HECK Reaktion zur Arylierung an der Allyl-Gruppe. Gemischte Produkte wurden nicht erhalten. Für die weiteren Diolefine wurde komplexe Produktgemische erhalten. Des Weiteren wurden die Diolefine in der Ringschlussmetathese untersucht und die entsprechenden Sultame in sehr guten Ausbeuten erhalten. Die Verwendung der Sultame in der C-H-Aktivierung war erfolglos. Es wird vermutet, dass für diese zweifachsubstituierten Sulfonamide die vorhandenen Reaktionsbedingungen optimiert werden müssen. Abschließend wurden verschiedene, enantiomerenreine Olefine ausgehend von Levoglucosenon dargestellt. Hierfür wurde Levoglucosenon zunächst mit einem Allyl- und 3-Butenylgrignard Reagenz umgesetzt. Die entsprechenden Produkte wurden in moderaten Ausbeuten erhalten. Eine weitere Methode begann mit der Reduktion von Levoglucosenon zum Levoglucosenol. Dieser Alkohol wurde mit Allylbromid erfolgreich verethert. Neben der Untersuchungen zur Ethersynthese, erfolgte die Veresterung von Levoglucosenol mit verschiedenen Sulfonylchloriden zu den entsprechenden Sulfonsäureestern. Diese Olefine wurden in einer Dominometathesereaktion untersucht. Ausgehend vom Allyllevoglucosenylether erfolgte die Darstellung eines Dihydrofurans. N2 - Within this work, the first systematic investigation of vinyl sulfonic acid ethyl ester (1a), phenyl vinyl sulfone (1b), N-benzyl-N-methylethene sulfonamide (1c) in the FUJIWARA-MORITANI reaction (alternatively referred to as DHR) was carried out. In this transition metal-catalysed reaction, the formation of a new C-C bond takes place through double activation of a C-H bond. Therefore, an atom-economical construction of molecules can be realised without the formation of by-products in the form of salts. Acetanilides (2) were used as aromatic reactants so that a regiospecific coupling by the catalyst-directing acetamide group (CDG) takes place. An extensive optimisation was carried out for the Pd catalysed DHR and subsequently nine differently substituted 2 could be functionalised with 1a and seven differently substituted 2 with 1b. Since a reaction with 1c failed to occur, a switch was made to a Ru-catalysed method for the DHR. With this method, 1c could be functionalised with acetanilides (2) and the spectrum of the acetanilides (2) used could be expanded to deactivating substituents. Subsequently, the sulfalkenylated acetanilides were investigated in further reactions. For this purpose, a reaction sequence consisting of a deacetylation-diazotisation-coupling reaction was used to convert the acetamide group into a leaving group and then to couple it in a MATSUDA-HECK reaction. With this method, several 1,2-dialkenylbenzenes could be obtained and the CDG was used one more time. In addition to transferring the CDG into a leaving group, it could also be integrated into the synthesis of various heterocycles. First, a 1,3 cycloaddition was carried out by deprotonated tosylmethylisocanide on the electron-deficient sulfalkenyl group for the synthesis of pyrroles. This was followed by coupling of the pyrrole function and the CDG by cyclocondensation, producing quinolines. Through these syntheses, sulfur analogues of the natural product marinoquionoline A could be obtained. Another transition metal-catalysed C-H activation reaction, the MATSUDA-HECK reaction, was used to arylate 1b with different subtituted aryldiazonium salts. Numerous styrenyl sulfones were obtained. Vinylsulfonyl compounds could not be used in cross-metathesis reactions within this work. Therefore, the synthesis of different dialkenylated sulfonamides was carried out. For this purpose, the chain length of the alkenyl group was varied between 2-3 at the sulfur atom and 3-4 at the nitrogen atom. The dialkenylated sulfonamides were used in the previously investigated C-H activation methods. N-allyl-N-phenylethensulfonamide (3) was successfully functionalised using the DHR and HECK reaction. Here, a method-specific coupling took place depending on the electron density of the corresponding alkenyl group. The DHR led to selective arylation at the vinyl group and the HECK reaction to selective arylation at the allyl group. Mixed products were not obtained. For the other diolefins, complex mixtures of products were obtained. Furthermore, the diolefins were investigated in ring closing metathesis reaction and the corresponding sultams were obtained in very good yields. The use of the synthesised sultams in C-H activation was unsuccessful. It is suggested that for these di-substituted sulfonamides the existing reaction conditions need to be optimised. Finally, various enantiomerically pure olefins were prepared starting from levoglucosenone. For this purpose, levoglucosenone was first reacted with an allyl-Grignard and 3 butenyl-Grignard reagent. The corresponding products were obtained in moderate yields. Another method started with the reduction of levoglucosenone to levoglucosenol. This alcohol was successfully etherified with allyl bromide. In addition to the studies on ether synthesis, the esterification of levoglucosenol with various sulfonyl chlorides to the corresponding sulfonic acid esters was carried out. These olefins were investigated in a domino metathesis reaction. Starting with allyl levoglucosenyl ether, the synthesis of a dihydrofuran was presented. KW - Vinylsulfonylverbindungen KW - Übergangsmetallkatalyse KW - vinyl sulfonyl compounds KW - transition metal catalysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-536879 ER - TY - GEN A1 - Peter, Martin G. A1 - Förster, Hans T1 - Zur Struktur von Eumelaninen : Identifizierung von Konstitutionsmustern durch Festkörper-NMR-Spektroskopie T1 - On the Structure of Eumelanins : Identification of Constitutional Patterns by Solid-state NMR Spectroscopy N2 - Aus dem Inhalt: Melanine sind komplexe polyphenolische Polymere. In der Natur entstehen sie durch meist enzymkatalysierte oxidative Polymerisation von o-Diphenolen. Man unterscheidet die aus Dopa 1 oder Dopamin 3 hervorgehenden, tiefschwarzen Eumelanine von den aus Dopa in Gegenwart von Cystein entstehenden, gelben bis braunen Phaomelaninen. [...] T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 054 Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17038 ER - TY - GEN A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizität in CH3NH3PbI3 T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Ihre außergewöhnlich hohen Konversionseffizienzen von über 20 % und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten für alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergewöhnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizität als mögliche Erklärung in den Fokus gerückt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erklärung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. Während das Molekülkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erklärung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1199 KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525674 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Schmidt, Joachim A1 - Bechmann, Wolfgang T1 - Zur Anwendung des Skalarprodukts von Kraft und Weg auf reversible Prozesse (Druck-Volumen-Änderung, Dehnung, Elektrostatische Wechselwirkung, Hub) T1 - To the application of the scalar product of force and displacement to reversible processes (pressure-volume change, elongation, electrostatic interaction, raising) BT - die Verwendung äußerer oder systemimmanenter Kräfte BT - the use of external or system-immanent forces N2 - Wir schlagen einen allgemein anwendbaren Algorithmus vor, der unter Verwendung des Skalarprodukts von Kraft und Weg zum richtigen Vorzeichen in den Gleichungen für die Arbeit und die Potentielle Energie bei reversiblen Prozessen (Druck-Volumen-Änderung, Dehnung, Elektrostatische Wechselwirkung, Hub)führt. Wir zeigen, dass es dabei möglich ist, systemimmanente oder externe Kräfte zu benutzen. Wir zeigen, dass bei Verwendung von systemimmanenten Kräften das Skalarprodukt mit negativem Vorzeichen anzusetzen ist. Zudem ist es sehr wichtig, nötige Vorzeichenwechsel bei den einzelnen Schritten zu beachten. Wir betonen dies, weil gelegentlich übersehen wird, dass ein Vorzeichenwechsel nötig ist, wenn das Wegdifferential ds durch das Höhendifferential dh beziehungsweise durch das Abstandsdifferential dx oder dr ersetzt werden muss. KW - Skalarprodukt von Kraft und Weg KW - systemimmanente Kräfte KW - Druck-Volumen-Änderung KW - Dehnung KW - Elektrostatische Wechselwirkung KW - Gravitation KW - scalar product of force and displacement KW - system-immanent forces KW - pressure-volume change KW - elongation KW - electrostatic interaction KW - gravitation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69732 ER - TY - THES A1 - Bomm, Jana T1 - Von Gold Plasmonen und Exzitonen : Synthese, Charakterisierung und Applikationen von Gold Nanopartikeln T1 - Of gold plasmons and excitons : synthesis, characterization and applications of gold nanoparticles N2 - In dieser Arbeit wurden sphärische Gold Nanopartikel (NP) mit einem Durchmesser größer ~ 2 nm, Gold Quantenpunkte (QDs) mit einem Durchmesser kleiner ~ 2 nm sowie Gold Nanostäbchen (NRs) unterschiedlicher Länge hergestellt und optisch charakterisiert. Zudem wurden zwei neue Synthesevarianten für die Herstellung thermosensitiver Gold QDs entwickelt werden. Sphärische Gold NP zeigen eine Plasmonenbande bei ~ 520 nm, die auf die kollektive Oszillation von Elektronen zurückzuführen ist. Gold NRs weisen aufgrund ihrer anisotropen Form zwei Plasmonenbanden auf, eine transversale Plasmonenbande bei ~ 520 nm und eine longitudinale Plasmonenbande, die vom Länge-zu-Durchmesser-Verhältnis der Gold NRs abhängig ist. Gold QDs besitzen keine Plasmonenbande, da ihre Elektronen Quantenbeschränkungen unterliegen. Gold QDs zeigen jedoch aufgrund diskreter Energieniveaus und einer Bandlücke Photolumineszenz (PL). Die synthetisierten Gold QDs besitzen eine Breitbandlumineszenz im Bereich von ~ 500-800 nm, wobei die Lumineszenz-eigenschaften (Emissionspeak, Quantenausbeute, Lebenszeiten) stark von den Herstellungs-bedingungen und den Oberflächenliganden abhängen. Die PL in Gold QDs ist ein sehr komplexes Phänomen und rührt vermutlich von Singulett- und Triplett-Zuständen her. Gold NRs und Gold QDs konnten in verschiedene Polymere wie bspw. Cellulosetriacetat eingearbeitet werden. Polymernanokomposite mit Gold NRs wurden erstmals unter definierten Bedingungen mechanisch gezogen, um Filme mit optisch anisotropen (richtungsabhängigen) Eigenschaften zu erhalten. Zudem wurde das Temperaturverhalten von Gold NRs und Gold QDs untersucht. Es konnte gezeigt werden, dass eine lokale Variation der Größe und Form von Gold NRs in Polymernanokompositen durch Temperaturerhöhung auf 225-250 °C erzielt werden kann. Es zeigte sich, dass die PL der Gold QDs stark temperaturabhängig ist, wodurch die PL QY der Proben beim Abkühlen (-7 °C) auf knapp 30 % verdoppelt und beim Erhitzen auf 70 °C nahezu vollständig gelöscht werden konnte. Es konnte demonstriert werden, dass die Länge der Alkylkette des Oberflächenliganden einen Einfluss auf die Temperaturstabilität der Gold QDs hat. Zudem wurden verschiedene neuartige und optisch anisotrope Sicherheitslabels mit Gold NRs sowie thermosensitive Sicherheitslabel mit Gold QDs entwickelt. Ebenso scheinen Gold NRs und QDs für die und die Optoelektronik (bspw. Datenspeicherung) und die Medizin (bspw. Krebsdiagnostik bzw. -therapie) von großem Interesse zu sein. N2 - In this thesis, the synthesis and optical characterization of spherical gold nanoparticles (NP) with diameters larger than ~ 2 nm, gold quantum dots (QDs) with diameters smaller than ~ 2 nm and gold nanorods (NRs) with different lengths are presented. In addition, a novel one-pot synthesis for the preparation of thermosensitive gold QDs is introduced. Gold NP solutions appear red colored due to their strong absorption in the visible range at ~ 520 nm. This absorption band is a result of surface plasmon resonance, which is caused by the coherent oscillation of conduction band electrons induced by an electromagnetic field. In contrast to spherical gold NPs, gold NRs show two surface plasmon bands due to their anisotropic shape, a transverse plasmon band at ~ 520 nm and a longitudinal plasmon band depending on the aspect ratio (length-to-width-ratio) of the gold NRs. If the size of the gold NPs decreases to values below ~ 2 nm, quantum-size confinement occurs and the surface plasmon band disappears. Additionally, the overlap between conduction band and valence band disappears, discrete electronic levels arise and a band gap is created. As a consequence of quantum confinement, the gold QDs show photoluminescence (PL) upon UV-irradiation. The gold QDs synthesized via the one-pot synthesis exhibit a broadband luminescence between 500 nm and 800 nm. The luminescence properties (emission peak, quantum yield, lifetime) strongly depend on the synthetic parameters like reaction temperature, stoichiometry and the surface ligand. Gold NRs and gold QDs were incoroporated into different polymers (e.g. cellulose triacetate). Polymer nanocomposite films showing optical anisotropy are obtainded by stretching polymer films containing gold NRs uniaxial in a tensile test machine. In addition to the optical characterization of gold NRs and QDs, their thermal behavior in solution as well as in different nanocomposites is studied. A shortening of the gold NRs or a transformation into spherical gold NP is observed, if the polymer nanocomposites containing gold NRs are heated above a temperature of 200 °C. The PL of the synthesized gold QDs strongly depends on the ambient temperature. An increase of PL quantum yield (QY) and PL lifetime occur, if the solutions are cooled. The best PL QY of 16.6 % was observed for octadecyl mercaptan capped gold QDs at room temperature, which could be improved to 28.6 % when cooling the solutions to -7 °C. Furthermore, optically anisotropic security labels containing gold NRs and thermosensitive security devices containing gold QDs are developed. Due to their unique optical properties, gold NRs and QDs are interesting candidates for optoelectronical as well as data storage devices and medical applications like biomedical imaging or cancer therapy. KW - Gold KW - Nanopartikel KW - Quantenpunkte KW - Nanostäbchen KW - Oberflächenplasmonenlasmonen KW - gold KW - nanoparticles KW - quantum dots KW - nanorods KW - surface plasmons Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66402 ER - TY - THES A1 - Halbrügge, Lena T1 - Von der Curricularen Innovation zur Wissenschaftskommunikation T1 - From curriculum innovation to science communication BT - Explorative Entwicklung und Evaluation einer Wissenschaftskommunikationsstrategie für naturwissenschaftliche Forschungsverbünde BT - exploratory development and evaluation of a strategy for science communication in scientific research associations N2 - Im Rahmen einer explorativen Entwicklung wurde in der vorliegenden Studie ein Konzept zur Wissenschaftskommunikation für ein Graduiertenkolleg, in dem an photochemischen Prozessen geforscht wird, erstellt und anschließend evaluiert. Der Grund dafür ist die immer stärker wachsende Forderung nach Wissenschaftskommunikation seitens der Politik. Es wird darüber hinaus gefordert, dass die Kommunikation der eigenen Forschung in Zukunft integrativer Bestandteil des wissenschaftlichen Arbeitens wird. Um junge Wissenschaftler bereits frühzeitig auf diese Aufgabe vorzubereiten, wird Wissenschaftskommunikation auch in Forschungsverbünden realisiert. Aus diesem Grund wurde in einer Vorstudie untersucht, welche Anforderungen an ein Konzept zur Wissenschaftskommunikation im Rahmen eines Forschungsverbundes gestellt werden, indem die Einstellung der Doktoranden zur Wissenschaftskommunikation sowie ihre Kommunikationsfähigkeiten anhand eines geschlossenen Fragebogens evaluiert wurden. Darüber hinaus wurden aus den Daten Wissenschaftskommunikationstypen abgeleitet. Auf Grundlage der Ergebnisse wurden unterschiedliche Wissenschaftskommunikationsmaßnahmen entwickelt, die sich in der Konzeption, den Rezipienten, sowie der Form der Kommunikation und den Inhalten unterscheiden. Im Rahmen dieser Entwicklung wurde eine Lerneinheit mit Bezug auf die Inhalte des Graduiertenkollegs, bestehend aus einem Lehr-Lern-Experiment und den dazugehörigen Begleitmaterialien, konzipiert. Anschließend wurde die Lerneinheit in eine der Wissenschaftskommunikationsmaßnahmen integriert. Je nach Anforderung an die Doktoranden, wurden die Maßnahmen durch vorbereitende Workshops ergänzt. Durch einen halboffenen Pre-Post-Fragebogen wurde der Einfluss der Wissenschaftskommunikationsmaßnahmen und der dazugehörigen Workshops auf die Selbstwirksamkeit der Doktoranden evaluiert, um Rückschlüsse darauf zu ziehen, wie sich die Wahrnehmung der eigenen Kommunikationsfähigkeiten durch die Interventionen verändert. Die Ergebnisse deuten darauf hin, dass die einzelnen Wissenschaftskommunikationsmaßnahmen die verschiedenen Typen in unterschiedlicher Weise beeinflussen. Es ist anzunehmen, dass es abhängig von der eigenen Einschätzung der Kommunikationsfähigkeit unterschiedliche Bedürfnisse der Förderung gibt, die durch dedizierte Wissenschaftskommunikationsmaßnahmen berücksichtigt werden können. Auf dieser Grundlage werden erste Ansätze für eine allgemeingültige Strategie vorgeschlagen, die die individuellen Fähigkeiten zur Wissenschaftskommunikation in einem naturwissenschaftlichen Forschungsverbund fördert. N2 - As part of an exploratory research approach a concept for science communication was developed and evaluated for a research training group that focuses on photochemical processes. The increasing demand for science communication by politics justifies this approach. Furthermore, for future scientists the communication of their own research is demanded to be an integrative part of good scientific practice. To prepare young researchers for the upcoming task at an early stage, science communication is also required in research associations. Hence, a preliminary study was conducted to first investigate the requirements of a science communication concept by evaluating doctoral students’ attitudes towards science communication and their communication skills using a questionnaire comprising closed questions. Moreover, science communication types where derived from the data. Based on these results multiple science communication measures that differ in the conception, the recipients, the form of the communication and their content were developed. With reference to the content of the graduate program an experiment and the accompanying material for teaching was designed. It can be used in schools and extracurricular learning settings. Subsequently, the teaching unit was implemented into one measure. Depending on the requirements of each science communication measure for the doctoral students the measures were complemented by preparatory workshops. Through a semi-open pre-post questionnaire, the impact of the science communication measures and the associated workshops on the doctoral students’ self-efficacy was evaluated. Also, conclusions about how the perception of their own communication skills changed as a result of the intervention could be drawn. The results suggest that the individual science communication measures affect the different types in various ways. It is likely that depending on one’s assessment of communication skills, there are different funding needs that can be addressed through dedicated measures. In this way, a generally applicable strategy which promotes individual science communication skills in a scientific research association will be proposed. KW - Wissenschaftskommunikation KW - Curriculare Innovation KW - Chemie KW - Elektrolumineszenz KW - Lerneinheit KW - Elektrolumineszenz-Folie KW - Wissenschaftskommunikationstypen KW - chemistry KW - curriculum innovation KW - electroluminescence KW - electroluminescent foil KW - learning unit KW - science communication KW - science communication types Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620357 ER - TY - THES A1 - Riemer, Martin T1 - Vom Phenol zum Naturstoff : Entwicklung nachhaltiger Mikrowellen-vermittelter SUZUKI-MIYAURA-Kupplungen und Tandem-Reaktionen T1 - From phenol to natural products : development of sustainable microwave-mediated Suzuki-Miyaura couplings and tandem reactions N2 - Ziel dieser Arbeit war die Entwicklung von Methoden zur Synthese von auf Phenol basierenden Naturstoffen. Insbesondere wurde bei der Methodenentwicklung die Nachhaltigkeit in den Vordergrund gerückt. Dies bedeutet, dass durch die Zusammenfassung mehrerer Syntheseschritte zu einem (Tandem-Reaktion) beispielsweise unnötige Reaktionsschritte vermieden werden sollten. Ferner sollten im Sinne der Nachhaltigkeit möglichst ungiftige Reagenzien und Lösungmittel verwendet werden, ebenso wie mehrfach wiederverwertbare Katalysatoren zum Einsatz kommen. Im Rahmen dieser Arbeit wurden Methoden zum Aufbau von Biphenolen mittels Pd/C-katalysierten Suzuki-Miyaura-Kupplungen entwickelt. Diese Methoden sind insofern äußerst effizient, da der ansonsten gebräuchliche Syntheseweg über drei Reaktionsschritte somit auf lediglich eine Reaktionsstufe reduziert wurde. Weiterhin wurden die Reaktionsbedingungen so gestaltet, dass einfaches Wasser als vollkommen ungiftiges Lösungsmittel verwendet werden konnte. Des Weiteren wurde für diese Reaktionen ein Katalysator gewählt, der einfach durch Filtration vom Reaktionsgemisch abgetrennt und für weitere Reaktionen mehrfach wiederverwendet werden konnte. Darüber hinaus konnte durch die Synthese von mehr als 100 Verbindungen die breite Anwendbarkeit der Methoden aufgezeigt werden. Mit den entwickelten Methoden konnten 14 Naturstoffe - z. T. erstmals - synthetisiert werden. Derartige Stoffe werden u. a. von den ökonomisch bedeutenden Kernobstgewächsen (Äpfeln, Birnen) als Abwehrmittel gegenüber Schädlingen erzeugt. Folglich konnte mit Hilfe dieser Methoden ein Syntheseweg für potentielle Pflanzenschutzmittel entwickelt werden. Im zweiten Teil dieser Arbeit wurde ein Zugang zu den sich ebenfalls vom Phenol ableitenden Chromanonen, Chromonen und Cumarinen untersucht. Bei diesen Untersuchungen konnte durch die Entwicklung zweier neuer Tandem-Reaktionen ein nachhaltiger und stufenökonomischer Syntheseweg zur Darstellung substituierter Benzo(dihydro)pyrone aufgezeigt werden. Durch die erstmalige Kombination der Claisen-Umlagerung mit einer Oxa-Michael-Addition bzw. konjugierten-Addition wurden zwei vollkommen atomökonomische Reaktionen miteinander verknüpft und somit eine überaus effiente Synthese von allyl- bzw. prenylsubstituierten Chromanonen und Chromonen ermöglicht. Ferner konnten durch die Anwendung einer Claisen-Umlagerung-Wittig-Laktonisierungs-Reaktion allyl- bzw. prenylsubstituierte Cumarine erhalten werden. Herausragendes Merkmal dieser Methoden war, dass in nur einem Schritt der jeweilige Naturstoffgrundkörper aufgebaut und eine lipophile Seitenkette generiert werden konnte. Die Entwicklung dieser Methoden ist von hohem pharmazeutischem Stellenwert, da auf diesen Wegen Verbindungen synthetisiert werden können, die zum einem über das notwendige pharmakologische Grundgerüst verfügen und zum anderen über eine Seitenkette, welche die Aufnahmefähigkeit und damit die Wirksamkeit im Organismus beträchtlich erhöht. Insgesamt konnten mittels der entwickelten Methoden 15 Chromanon-, Chromon- und Cumarin-Naturstoffe z. T. erstmals synthetisiert werden. N2 - The aim of this work was the development of methods for the synthesis of natural products based on phenol. In particular, in developing methods, sustainability has been brought to the fore. This means that, for example, unnecessary reaction steps should be avoided by the combination of several synthetic steps to a (tandem reaction). Furthermore, non-toxic as possible in terms of sustainability reagents and solvents should be used, as well as multiple reusable catalysts are used. In this work, methods have been developed for the synthesis of bisphenols using Pd / C-catalyzed Suzuki-Miyaura coupling reactions. These methods are so far äuÿerst e? Cient, since the otherwise common synthetic route was thus reduced to merely a reaction stage, three reaction steps. Furthermore, the reaction conditions were designed to plain water could be used as a completely non-toxic solvent. It was also elected a catalyst for these reactions, which could be easily separated by filtration from the reaction mixture and reused several times for further reactions. In addition, it could be demonstrated through the synthesis of more than 100 compounds, the broad applicability of the methods. ., For the first time T. - - Using the methods developed 14 natural compounds could be synthesized. Such substances are among others generated by the economically important pome fruit crops (apples, pears) as a defense against pests. Consequently, it could be developed using these methods, a synthetic route for potential plant protection products. In the second part of this work, access to the likewise derived from phenol chromanones, chromones and coumarins was investigated. In these studies, a sustainable and economical route in stages to represent substituted benzo (dihydro) pyrones could be demonstrated by the development of two new tandem reactions. The initial combination of the Claisen rearrangement with an oxa-Michael addition or conjugated addition of two perfectly atom-economical reactions were interlinked and thus allows a very effiente synthesis of allyl or prenylsubstituierten chromanones and chromones. Furthermore or prenylsubstituierte coumarins could be obtained by the application of a Claisen rearrangement Wittig lactonization reaction allyl. The outstanding feature of these methods was that built up in only one step of the respective natural product base and a lipophilic side chain could be generated. The development of these methods is of great pharmaceutical importance, since these paths compounds can be synthesized on a the necessary pharmacological Backbone and on the other hand have a side chain, which increases the absorption and thus the effectiveness in the body considerably. Overall, z. T. were synthesized using the methods developed Chromanon- 15, chromone and coumarin-natural products for the first time. KW - Phenol KW - Biphenol KW - Cumarin KW - Chromon KW - Chromanon KW - phenol KW - biphenol KW - coumarine KW - chromone KW - chromanone Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72525 ER - TY - THES A1 - Schulte-Osseili, Christine T1 - Vom Monomer zum Glykopolymer T1 - From monomer to glycopolymer BT - Anwendung als Biofunktionalitäten auf Oberflächen und als Transportmoleküle BT - application as biofunctionalized surfaces and transport molecules N2 - Glykopolymere sind synthetische und natürlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich für viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen ermöglicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kostengünstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden über ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in wässriger Lösung untersucht. Die Polymere formten in wässriger Lösung Mizellen, bei denen der Zuckerblock an der Oberfläche der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberflächenbeschichtung über „Grafting from“ mit SI-ATRP oder über „Grafting to“ auf verschiedene Oberflächen gebunden. Durch die glykopolymerbschichteten Oberflächen konnte die Glykan Protein Wechselwirkung über spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsstärke untersucht. Die synthetisierten Glykopolymere könnten durch Austausch der Glykaneinheit für andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die bioverträglichen Glykopolymere wären alternativen für den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den Körper. Außerdem könnten die funktionalisierten Oberflächen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, könnten als antiadsorptive Oberflächenbeschichtung z.B. in der Zellbiologie eingesetzt werden. N2 - Glycopolymers are synthetic and naturally occurring polymers that carry a gylcan unit in the side chain of the polymer. Glycans are responsible for many biological processes due to the glycn-protein interaction. The involvement of glcans in these biological processes enables the imitation and analysis of interactions by suitable model coumponds, e.g. glycopolymers. This system of glycan-protein interaction will be investigated and studied by glycopolymers in order to demonstrate the specific and selective binding of proteins to glycopolymers. The proteins that are able to selectively bind carbohydrate structures are called lectins. In this dissertation different glycopolymers were synthesized. Care should be taken to ensure an effficient and cost-effective synthesis route. Different glycopolymers were produced by functionalized monomers with different sugars, such as mannose, lactose, galactose or N-acetyl-glucosamine as functional group. From these functionalized glycomonomers, glycopolymers were synthesized via ATRP and RAFT polymerization. The glycopolymers obtained were used as hydrophilic blocks in diblock copolymers and self-assembly in aqueous solution was investigated. In aqueoussolution, the polymers formed micelles in which the sugar block sits on the surface of the micelles. The micelles were loaded with a hydrophobic fluorescent dxe, which made it possible to determine the CMC of micelle formation. In additiom, the glycopolymers were bound to various surfaces as surface coatings via “grafting from” with SI-ATRP or via “grafting to”. Through the glycopolymer-coated surfaces, the glycan-protein interaction could be investigated by spectroscpic measurement methods such as SPR and microring resonators. The specific and selective binding of lectins to the glycopolymers was detected and the binding strength was investigated. The synthesised glycopolymers could become adressable for other lectins by exchanging the glycan unit and thus open up a broad field of other proteins. The biocompatible glycopolymers would be an alternative for use in iological processes as transporters of drugs or dyes into the body. In addtion, the functionalised surfaces could be used in diagnostics for regognition of lectins. The glycan, which do nit bind selectively and specifically to proetins, could be used as anit-adsoptive surface coatings, e.g. in cell biology. KW - Glykopolymere KW - Polymerisation KW - Oberflächenbeschichtung KW - Lektine KW - Glykan-Protein-Wechselwirkung KW - glycopolymers KW - polymerization KW - surface modification KW - lectins KW - glycan-protein interaction Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432169 ER - TY - THES A1 - Badetko, Dominik T1 - Untersuchungen zur Totalsynthese von Arylnaphthalen-Lignanen mittels Photo-Dehydro-Diels-Alder-Reaktion als Schlüsselschritt T1 - Studies on the total synthesis of arylnaphthalene lignans using Photo-Dehydro-Diels-Alder reaction as a key step N2 - Im Rahmen dieser Dissertation wurden die erstmaligen Totalsynthesen der Arylnaphthalen-Lignane Alashinol D, Vitexdoin C, Vitrofolal E, Noralashinol C1 und Ternifoliuslignan E vorgestellt. Der Schlüsselschritt der entwickelten Methode, basiert auf einer regioselektiven intramolekularen Photo-Dehydro-Diels-Alder (PDDA)-Reaktion, die mittels UV-Strahlung im Durchflussreaktor durchgeführt wurde. Bei der Synthese der PDDA-Vorläufer (Diarylsuberate) wurde eine Synthesestrategie nach dem Baukastenprinzip verfolgt. Diese ermöglicht die Darstellung asymmetrischer komplexer Systeme aus nur wenigen Grundbausteinen und die Totalsynthese einer Vielzahl an Lignanen. In systematischen Voruntersuchungen konnte zudem die klare Überlegenheit der intra- gegenüber der intermolekularen PDDA-Reaktion aufgezeigt werden. Dabei stellte sich eine Verknüpfung der beiden Arylpropiolester über einen Korksäurebügel, in para-Position, als besonders effizient heraus. Werden asymmetrisch substituierte Diarylsuberate, bei denen einer der endständigen Estersubstituenten durch eine Trimethylsilyl-Gruppe oder ein Wasserstoffatom ersetzt wurde, verwendet, durchlaufen diese Systeme eine regioselektive Cyclisierung und als Hauptprodukt werden Naphthalenophane mit einem Methylester in 3-Position erhalten. Mit Hilfe von umfangreichen Experimenten zur Funktionalisierung der 4-Position, konnte zudem gezeigt werden, dass die Substitution der nucleophilen Cycloallen-Intermediate, während der PDDA-Reaktion, generell durch die Zugabe von N-Halogen-Succinimiden möglich ist. In Anbetracht der geringen Ausbeuten haben diese intermolekularen Abfangreaktionen, jedoch keinen präparativen Nutzen für die Totalsynthesen von Lignanen. Mit dem Ziel die allgemeinen photochemischen Reaktionsbedingungen zu optimieren, wurde erstmalig die triplettsensibilisierte PDDA-Reaktion vorgestellt. Durch die Verwendung von Xanthon als Sensibilisator wurde der Einsatz von effizienteren UVA-Lichtquellen ermöglicht, wodurch die Gefahr einer Photozersetzung durch Überbestrahlung minimiert wurde. Im Vergleich zur direkten Anregung mit UVB-Strahlung, konnten die Ausbeuten mit indirekter Anregung durch einen Photokatalysator signifikant gesteigert werden. Die grundlegenden Erkenntnisse und die entwickelten Synthesestrategien dieser Arbeit, können dazu beitragen zukünftig die Erschließung neuer pharmakologisch interessanter Lignane voranzutreiben. 1 Bisher ist nur die semisynthetische Darstellung von Noralashinol C ausgehend von Hydroxymatairesinol literaturbekannt. N2 - In this dissertation, the first total syntheses of the arylnaphthalene lignans alashinol D, vitexdoin C, vitrofolal E, noralashinol C (1) and ternifoliuslignan E were presented. The key step of the developed method, is based on a regioselective intramolecular photo-dehydro-Diels-Alder (PDDA) reaction, which was carried out using UV radiation in a flow reactor. For the synthesis of the PDDA precursors (diaryl suberates), a synthesis strategy based on the modular principle was followed. This allows the preparation of asymmetric complex systems from only a few basic building blocks and the total synthesis of a large number of lignans. Systematic preliminary studies have also demonstrated the clear superiority of the intra- versus intermolecular PDDA reaction. In this context, linking the two arylpropiol esters via a subaric acide linker, in the para position, was found to be particularly efficient. If asymmetrically substituted diaryl suberates, in which one of the terminal ester substituents has been replaced by a trimethylsilyl group or a hydrogen atom, are used, these systems undergo regioselective cyclization and naphthalenophanes with a methyl ester in the 3-position are obtained as the main product. With the help of extensive experiments on the functionalization of the 4-position, it was also shown that the substitution of the nucleophilic cycloallen intermediates, during the PDDA reaction, is generally possible by the addition of N-halogen succinimides. Considering the low yields, these intermolecular interception reactions, however, have no preparative utility for the total syntheses of lignans. With the aim of optimizing the general photochemical reaction conditions, the triplet-sensitized PDDA reaction was presented for the first time. The use of xanthone as a sensitizer enabled the use of more efficient UVA light sources, minimizing the risk of photodecomposition due to overirradiation. Compared to direct excitation with UVB radiation, yields were significantly increased with indirect excitation by a photocatalyst. The basic findings and the developed synthesis strategies of this work, may contribute to the future development of new pharmacologically interesting lignans. (1) So far, only the semisynthetic preparation of noralashinol C starting from hydroxymatairesinol is is known from the literature. KW - Totalsynthese KW - Arylnaphthalen-Lignane KW - Photo-Dehydro-Diels-Alder-Reaktion KW - Arylnaphthalene lignans KW - Photo-Dehydro-Diels-Alder reaction KW - total synthesis Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-593065 ER - TY - THES A1 - Czarnecki, Maciej T1 - Untersuchungen zur Synthese von (1,7)-Naphthalenophanen über eine Dehydro-DIELS-ALDER-Reaktion als Schlüsselschritt T1 - Investigations towards the synthesis of (1,7)-Naphthalenophanes via a Dehydro-DIELS-ALDER reaction as key step BT - synthetisch-technische Aspekte, Eigenschaften und Anwendungen BT - synthetic-technical aspects, properties and applications N2 - Die vorliegende Dissertation behandelt drei thematische Schwerpunkte. Im Ergebnisteil steht die chemische Synthese von sogenannten (1,7)-Naphthalenophanen im Vordergrund, die zur Substanzklasse von Cyclophanen gehören. Während zahlreiche Synthesemethoden Strategien zum Aufbau von Ringsystemen (wie z. B. von Naphthalenophanen) verfolgen, die Teil einer bereits existierenden aromatischen Struktur der Ausgangsverbindung sind, nutzen nur wenige Ansätze Reaktionen, die einen Ringschluss zum gewünschten Produkt erst im Zuge der Synthese etablieren. Eine Benzanellierung, die eine besondere Aufmerksamkeit im Arbeitskreis erfahren hat, ist die Dehydro-DIELS-ALDER-Reaktion (DDA-Reaktion). Im Rahmen dieser Arbeit konnte gezeigt werden, dass zwölf ausgewählte (1,7)-Naphthalenophane, die teilweise ringgespannt und makrozyklisch aufgebaut waren, mithilfe einer photochemischen Variante der DDA-Reaktion (PDDA-Reaktion) zugänglich gemacht werden können. Die Versuche, auf thermischem Wege (TDDA-Reaktion) (1,7)-Naphthalenophane herzustellen, misslangen. Die außergewöhnliche Reaktivität der Photoreaktanten konnte mithilfe quantenchemischer Berechnungen durch eine gefaltete Grundzustandsgeometrie erklärt werden. Darüber hinaus wurden Ringspannungen und strukturelle Spannungsindikatoren der relevanten Photoprodukte ermittelt und Trends in Abhängigkeit der Linkerlänge in den NMR-Spektren der Zielverbindungen ermittelt sowie diskutiert. Zudem zeigte eine Variation am Chromophor (Acyl-, Carbonsäure- und Carbonsäureester) der Photoreaktanten bei der Bestrahlung in Dichlormethan eine vergleichbare Photokinetik und -reaktivität. Der zweite Abschnitt dieser Dissertation ist dem Design und der Entwicklung zweier Photoreaktoren für UV-Anwendungen im kontinuierlichen Durchfluss gewidmet, da photochemische Transformationen bekanntermaßen in ihrer Skalierbarkeit limitiert sind. Im ersten Prototyp konnten mittels effizienter Parallelschaltung mit bis zu drei UV-Lampen (𝜆𝜆 = 254, 310 und 355 nm) Produktmaterialmengen von bis zu n = 188 mmol anhand eines ausgewählten Fallbeispiels erreicht werden. Im konstruktionstechnisch stark vereinfachten zweiten Photoreaktor wurden alle quarzhaltigen Elemente gegen günstigeres PLEXIGLAS® ersetzt. Das Resultat waren identische Raum-Zeit-Ausbeuten in Bezug auf das zuvor gewählte Synthesebeispiel. Demnach bietet die UV-Photochemie im kontinuierlichen Durchfluss Vorteile gegenüber der traditionellen Bestrahlung im Tauchreaktor. Hinsichtlich Reaktionszeit, Produktausbeuten und Lösemittelverbrauch ist sie synthetisch weit überlegen. Im letzten Abschnitt der Arbeit wurden diese Erkenntnisse genutzt, um biomedizinisch und pharmakologisch vielversprechende 1-Arylnaphthalen-Lignane mittels einer intramolekularen PDDA-Reaktion (IMPDDA-Reaktion) als Schlüsselschritt herzustellen. Hierzu wurden drei Konzepte erarbeitet und in der Totalsynthese von drei ausgewählten Zielstrukturen auf Basis des 1-Arylnaphthalengrundgerüsts realisiert. N2 - The content of this doctoral thesis focusses on three major thematic aspects. The first half of this work is devoted to the chemical synthesis of so-called (1,7)-naphthalenophanes, which are classified in the group of cyclophanes. Several synthetic methods consist of strategies, which are often part of an already existing aromatic unit (e.g. as in naphthalenophanes). Basic approaches where the aromatic moiety is formed during the reaction in terms of a ring-closing reaction can be rarely found. A powerful benzoanellation method which has proven suitability in the working group is the Dehydro-DIELS-ALDER reaction (DDA reaction). As part of this work twelve selected examples of partially strained and macrocyclic (1,7)-naphthalenophanes could be obtained via a photochemical variant of the DDA reaction (PDDA reaction). In contrast the thermal version (TDDA reaction) for the preparation of (1,7)-naphthalenophanes failed. The extraordinary reactivity of photo reactants originated from a folded ground-state geometry is caused by π-stacking as calculated by quantum chemical methods. In addition, ring strains and structural strain indicators of relevant photo products were calculated as well. Besides that, trends inside the corresponding product NMR spectra in dependence of the linker length were identified and discussed. Moreover, a variation of the chromophoric group (acyl, carboxylic acid and carboxylic acid ester) in the photo reactants showed comparable photokinetics and -reactivities after being irradiated in dichloromethane. The second part dealt with the design and development of two continuous-flow reactors for applications in the UV-range, since photochemical transformations are limited by their scalability. The first prototype reactor could generate via an internal numbering-up approach consisting of three lamps (𝜆𝜆 = 254, 310 und 355 nm) product material with up to n = 188.0 mmol as a selected test system showed. The second flow UV-reactor was constructionally simplified by exchanging all quarz containing elements by PLEXIGLAS®. As a result, identical space-time-yields could be obtained with the same chosen test substrate. Continuous-flow UV-photochemistry can therefore be regarded as advantageous over traditional batch photochemistry regarding reaction times, product yields and solvent waste. As a result, the last section provided insights into the synthesis of biomedically and pharmacologically relevant 1-arylnaphthalene lignanes based on an intramolecular PDDA reaction (IMPDDA reaction) as key step. For this purpose, three synthesis concepts were elaborated and applied in the total synthesis of three selected natural products consisting of an 1-arylnaphthalene skeleton. KW - Photochemie KW - Durchflusschemie KW - 1-Arylnaphthalen-Lignane KW - photochemistry KW - flow chemistry KW - 1-arylnaphthalene lignanes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-508670 ER - TY - THES A1 - Niehus, Christina T1 - Untersuchungen zur Selektivität unterschiedlich substituierter Iminodiessigsäure-Ionenaustauscher gegenüber zweiwertigen Metallionen T1 - Research into the selectivity of iminodiacetat-ion-exchangers compared to bivalent metals N2 - Zur selektiven Entfernung von Schwermetallen aus industriellen Abwässern und Prozesslösungen der metallverarbeitenden Industrie werden synthetische metallkomplexierende funktionelle Polymere – mit Iminodiessigsäure (IDE) als aktive Spezies – seit Jahren erfolgreich zur Eliminierung störender Kationen eingesetzt. Ständig steigende Anforderungen an die Qualität der aufzubereitenden Wässer verlangen nach leistungsfähigen Selektivaustauschern, die den Erhalt der Eigenschaften von Prozesslösungen (z. B. pH-Wert, Salzgehalt) ermöglichen. Ziel der Untersuchungen war es, die strukturellen Matrixeinflüsse auf Beladung, Kapazität, Selektivität und Kinetik durch Variation der Matrix und der experimentellen Bedingungen näher zu untersuchen. Auf Basis einer monodispersen Erstsubstitution eines Styren-Divinylbenzen-Copolymerisates wurde durch gezielten Einbau funktioneller Gruppen – Synthese mit differenziertem Substitutionsgrad (TK/N 1-2) – versucht, systematisch den Einfluss des Substitutionsgrades der Matrix auf die Eigenschaften der Ionenaustauscher zu analysieren. Methodisch geordnet wurden zunächst die Versuche nach dem Batch- und anschließend nach dem Säulenverfahren durchgeführt und parallel dazu die Matrix charakterisiert. Das Verhalten der funktionellen Ankergruppen in Abhängigkeit vom pH-Wert der Lösung (pH-Bereich 2 - 5) wurde untersucht, der optimale Anreicherungs-pH-Wert, die maximale Beladung (Kapazität) und Selektivität der unterschiedlich substituierten Proben für die Schwermetall-Ionen Cu, Zn, Ni, Cd, Pb und Co ermittelt. Den statischen Versuchen folgten dynamische Untersuchungen im Säulenverfahren. Ziel war die Ermittlung des Durchbruchverhaltens und der Durchbruchkapazität bei optimalem pH-Wert in Abhängigkeit vom Substitutionsgrad gegenüber den Einzelmetallionen (Cu, Ni, Zn) und ausgewählten Paaren (Cu/Ni, Cu/Zn, Ni/Zn). Alle Ionenaustauscher wurden ausschließlich in der Ca-Form eingesetzt. N2 - Selective ion exchange offers a good solution for cleaning many waste streams. The aim of this study was to develop selective ion exchange materials for effective and economical applications in waste water treatment. The investigation of chelate resins is based on iminodiacetate with different secondary substitution (degree of substitution TK/N 1 - 2, from aminoacetic acid to iminodiacetate as functional group). As comparison the weak acid resin Lewatit TP 207 was used. The research focused on the application of selective ion exchange resins for waste effluents to ascertain the feasibility of a selective ion exchange process employing chelating cation exchangers for heavy metal removal. The metals of interest were copper (Cu), zinc (Zn), nickel (Ni), cobalt (Co), lead (Pb) and cadmium (Cd) and the resins appointed in the Ca-form. The batch operation was conducted to determine the equilibrium data and the operating resin capacity, one of the most important properties. The main equilibrium parameter affecting the ion exchange was the pH value (array 2-5). The best accumulation pH value was obtained using pH 5 for all metals. The only exception was lead with pH 3. After determining the viability of the different resins with batch systems, this study has focused on the column mode experiments. They were generated for the selected resins in the continuous ion exchange process which are essentially reserved for industrial applications. A practical application of the breakthrough curves is the determination of the breakthrough time which helps to find the best operating conditions. KW - Schwermetallentfernung KW - Ionenaustauscher KW - schwach saure Chelataustauscher KW - Lewatit TP 207 KW - heavy metal removal KW - ion exchange KW - chelating cation exchanger KW - weak acid resin KW - Lewatit TP 207 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13190 ER - TY - THES A1 - Bauch, Marcel T1 - Untersuchungen an neuartigen sauerstoffsubstituierten Donoren und Akzeptoren für Singulettsauerstoff T1 - Investigations of novel oxygen substituted donors and acceptors of singlet oxygen N2 - Im Verlauf dieser Arbeit wurden Aromaten wie Naphthaline und Anthracene mit Singulettsauerstoff, einer reaktiven Form des gewöhnlichen Sauerstoffs, zu sogenannten Endoperoxiden umgesetzt. Die hier eingesetzten Systeme wurden mit funktionellen Gruppen modifiziert, die über eine Sauerstoffbrücke mit dem Aromaten verknüpft sind. Die daraus entstandenen Endoperoxide sind meist besonders labil und konnten in dieser Arbeit isoliert und umfassend untersucht werden. Hierbei wurde zum einen das Reaktionsverhalten untersucht. Es konnte gezeigt werden, dass die Aromaten in Abhängigkeit ihrer funktionellen Gruppen unterschiedlich schnell mit Singulettsauerstoff reagieren. Die so ermittelten Reaktivitäten wurden zusätzlich durch theoretische Berechnungen gestützt. Die resultierenden Endoperoxide wurden unter verschiedenen Bedingungen wie erhöhter Temperatur oder einem sauren bzw. basischen Milieu auf ihre Stabilität hin untersucht. Dabei konnte gezeigt werden, dass die auf Naphthalinen basierenden Endoperoxiden den gebundenen Singulettsauerstoff in guten Ausbeuten oft schon bei sehr niedrigen Temperaturen (−40 bis 0 °C) freisetzen. Diese Verbindungen können daher als milde Quellen dieser reaktiven Sauerstoffspezies eingesetzt werden. Weiterhin konnten bei den Anthracenendoperoxiden Zerfallsmechanismen aufgeklärt und andere reaktive Sauerstoffspezies wie Wasserstoffperoxid oder Persäuren nachgewiesen werden. Zu den Modifikationen der Aromaten gehören auch Glucosereste. Dadurch könnten sich die hier hergestellten Endoperoxide als vielversprechende Verbindungen in der Krebstherapie herausstellen, da Krebszellen deutlich stärker als gesunde Zellen kohlenhydratreiche Verbindungen für ihren Stoffwechsel benötigen. Bei der Spaltung von Endoperoxiden mit Glucosesubstituenten werden ebenfalls reaktive Sauerstoffspezies frei, die so zum Zelltod führen könnten. N2 - During the course of this work aromatic compounds like naphthalenes and anthracenes have been converted to so-called endoperoxides which are products of the reaction with a highly reactive form of oxygen: singlet oxygen. Beforehand the applied systems have been modified with several substituents that are linked via an oxygen-bridge to the aromatic core. The resulting endoperoxides are usually quite labile. In this work those labile compounds could be isolated and thoroughly investigated. At first, the manner of reaction was studied. The aromats showed different reactions rates with singlet oxygen, depending on their functional groups. Furthermore, the determined rate constants as well as certain trends could be supported and verified by theoretical calculations. The resulting endoperoxides have been examined for their stability under certain conditions like acids, bases and elevated temperature. Here it could be shown that naphthalene endoperoxides are able to release the bound endoperoxide in good yields at very low temperatures to -40 to 0 °C). Hence, those compounds can be used as very mild sources of the reactive oxygen species. Moreover, the mechanisms referring to the decomposition of the anthracene endoperoxides could be clarified while other reactive oxygen species like hydrogen peroxide or peracids could be identified. A special modification of the aromats have been glucose substituents. The resulting aryl glycosides have been converted to promising endoperoxides. Such compounds could be used in cancer therapy, because cancer cells tend to need carbohydrate-based energy in a higher degree than healthy cells. During the cleavage of those glycoside endoperoxides reactive oxygen species are released, which might lead to cell death. KW - Singulettsauerstoff KW - Endoperoxide KW - Aromaten KW - singlet oxygen KW - endoperoxides KW - aromats Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425140 ER - TY - THES A1 - Merkel, Roswitha T1 - Untersuchung zur Synthese und Eigenschaften von komplexen Oligospiroketalen T1 - Investigation of synthesis and properties of complex oligospiroketals N2 - Es ist in dieser Arbeit gelungen, starre Oligospiroketal(OSK)-Stäbe als Grundbausteine für komplexe 2D- und 3D-Systeme zu verwenden. Dazu wurde ein difunktionalisierter starrer Stab synthetisiert, der mit seines Gleichen und anderen verzweigten Funktionalisierungseinheiten in Azid-Alkin-Klickreaktionen eingesetzt wurde. An zwei über Klickreaktion verknüpften OSK-Stäben konnten mittels theoretischer Berechnungen Aussagen über die neuartige Bimodalität der Konformation getroffen werden. Es wurde dafür der Begriff Gelenkstab eingeführt, da die Moleküle um ein Gelenk gedreht sowohl gestreckt als auch geknickt vorliegen können. Aufbauend auf diesen Erkenntnissen konnte gezeigt werden, dass nicht nur gezielt große Polymere aus bis zu vier OSK-Stäben synthetisiert werden können, sondern es auch möglich ist, durch gezielte Änderung von Reaktionsbedingungen der Klickreaktion auch Cyclen aus starren OSK-Stäben herzustellen. Die neu entwickelte Substanzklasse der Gelenkstäbe wurde im Hinblick auf die Steuerung des vorliegenden Gleichgewichts zwischen geknicktem und gestrecktem Gelenkstab hin untersucht. Dafür wurde der Gelenkstab mit Pyrenylresten in terminaler Position versehen. Es wurde durch Fluoreszenzmessungen festgestellt, dass das Gleichgewicht z. B. durch die Temperatur oder die Wahl des Lösungsmittels beeinflussbar ist. Für vielfache Anwendungen wurde eine vereinfachte Synthesestrategie gefunden, mit der eine beliebige Funktionalisierung in nur einem Syntheseschritt erreicht werden konnte. Es konnten photoaktive Gelenkstäbe synthetisiert werden, die gezielt zur intramolekularen Dimerisierung geführt werden konnten. Zusätzlich wurde durch Aminosäuren ein Verknüpfungselement am Ende der Gelenkstäbe gefunden, das eine stereoselektive Synthese von Mehrfachfunktionalisierungen zulässt. Die Synthese der komplexen Gelenkstäbe wurde als ein neuartiges Gebiet aufgezeigt und bietet ein breites Forschungspotential für weitere Anwendungen z. B. in der Biologie (als molekulare Schalter für Ionentransporte) und in der Materialchemie (als Ladungs- oder Energietransporteure). N2 - In this dissertation the use of rigid Oligospiroketal (OSK)-rods as basic model for 2D- and 3D-systems was shown. For that purpose a bifunctionalized rigid rod was synthesized and was used in Azide-Alkine-clickreaction with itself and with other branched functionalized units. By theoretical calculations a statement about the novel bimodulation of the conformation of two OSK-rods which are linked by a clickreaction could be made. “Articulated rod” was introduced as new term, because the molecules could exist elongated or buckled. Based on this knowledge it became apparent that not only the size selective synthesis of polymers by using up to four OSK-rods is possible but also cycles with OSK-rods by using different click-reaction conditions can be synthesized. The newly developed group of “articulated rod” substances was examined regarding the equilibrium between buckled and elongated “articulated rod”. That for the articulated rod was functionalized with pyrenyl moieties in terminal position. By fluorescence measurements of these rods it could be shown that the equilibration is influenced by different temperatures and different solvents. For multiple applications a simplified strategy for synthesis with a wide range of functionalization in only one step of synthesis could be achieved. Photoactive articulated rods were synthesized, that could be selectively intramolecular dimerized. Additionally, amino acids were introduced as linker at the end of a articulated rod. By this a stereoselective synthesis of multiple functionaliations is possible. By the synthesis of complex articulated rods a novel field of research was found. There is a wide potential of research for more applications for example in biology (as molecular switch for transportation of ions) and in materials chemistry (as transporter for charge or energy). KW - Stab KW - Oligospiroketal KW - Klick KW - Alkin KW - Azid KW - articulated KW - rod KW - click KW - alkine KW - azide Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72561 ER - TY - THES A1 - Fandrich, Artur T1 - Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen T1 - Investigation of the behavior of thermoresponsive polymers on electrodes in interaction with biomolecular systems N2 - Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis für die Entwicklung der responsiven Grenzfläche dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in Lösungen haben gezeigt, dass der Trübungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenstärke der Lösung abhängig ist. Nach der Charakterisierung der Polymere in Lösung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfläche der Gold-Elektroden durchgeführt. Während bei Polymeren I und II die Ankopplung auf einer Amidverbrückung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gewählt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-Lösungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung über Amidverbrückung lieferte dünne Filme (10 – 15 nm), während der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfläche relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberflächen in Lösungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich – ab einem kritischen Punkt (37 °C für Polymer I und 45 °C für Polymer II) wird zunächst langsame Zunahme der Peakströme wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix für Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgeführt. Das hydrophile FLAG-TAG-Peptid verändert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antikörper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antikörper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antikörper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. Für die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgewählt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringfügig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode ähnelt dem der reinen Polymer III-Elektrode – die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich verändert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Ströme für die HA-TAG-Elektroden sind deutlich geringer als die für die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zurückzuführen ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdrängt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies führt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabhängigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolekül deutlich besser für eine potentielle Verwendung der Polymer III-Filme für sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet. N2 - This work describes the immobilization and characterization of thermoresponsive polymer films on gold electrodes. The immobilized films were thermoresponsive copolymers (polymers I, II and III) from the group of poly(oligo(ethylene glycol)methacrylates). After the synthesis, the aqueous solutions of copolymers in presence of (buffering) salts were investigated. The turbidimetry measurements revealed that the responsive behaviour of the polymers strongly depends on the pH and the ionic strength of the solution. After the studies in the solution, experiments on the covalent immobilization of the polymers on gold electrodes were performed. The fixation strategy for the polymers I and II was based on the amide coupling. The polymer III was immobilized by irradiation with UV-light. The successful immobilization was proved by cyclic voltammetry and electrochemical impedance spectroscopy measurements in solutions containing K3/4[Fe(CN)6]. The ellipsometry measurements showed that the obtained films were of different thickness. Polymer I and II films obtained from the amide coupling were thinner (10 – 15 nm) compared to photolytically immobilized polymer III films (70-80 nm). Electrochemical temperature experiments on polymer modified electrodes in K3/4[Fe(CN)6] solutions showed that the polymer I, II and III retain the responsivity after the fixation on the electrode surface. The thermoresponsive behaviour of the thin polymer I and II films is discontinuous – after the achieving of the critical temperature point (37 °C for polymer I and 45 °C for polymer II) the increase of the peak currents changes significantly and becomes faster hinting at the restructuration process. In contrast to this the temperature behaviour of the polymer III films is continuous in the temperature range between 25 and 50 °C. The peak currents for the polymer III electrodes decrease with increasing temperature. Furthermore, the application of polymer II and polymer III surfaces as a responsive platform for bio-recognition reactions was investigated. For this purpose, the coupling of small bioreceptors (tag peptides) on polymer films was performed. It was found that the hydrophilic FLAG-TAG peptide does not significantly alter the temperature behaviour of the polymer II film because it does not affect the hydrophilicity of the network. Additionally, the effect of coupling the ANTI-FLAG-TAG antibodies to FLAG-TAG-modified polymer II films was investigated. It was shown that the antibodies specifically bind to FLAG-TAG-modified polymer II. No nonspecific binding of ANTI-FLAG-TAG to polymer II was observed. The temperature experiments have shown that the thermal restructuring of the polymer II-FLAG-TAG film still takes place after antibody coupling. The influence of ANTI-FLAG-TAG coupling is low, since the difference in the hydrophilicity between polymer II and FLAG-TAG or ANTI-FLAG-TAG is too low. In addition to the hydrophilic FLAG-TAG peptide, the significantly more hydrophobic HA-TAG peptide was selected for the investigations with polymer III electrodes. As in the case of the polymer II electrode, the coupled FLAG-TAG peptide only slightly affects the temperature behaviour of the polymer III network. The measured current values are lower than for the polymer III electrode. The temperature behaviour of the FLAG-TAG electrode resembles that of the pure polymer III electrode - the current values sink continuously until the temperature of approx. 40 ° C is reached, at which a plateau is observed. Obviously, FLAG-TAG does not significantly alter the hydrophilicity of the polymer III network even in this case. The hydrophobic HA-TAG peptide coupled to polymer III electrodes, on the other hand, strongly influences the swelling state of the network. The currents for the HA-TAG electrodes are significantly lower than those for the FLAG-TAG polymer III electrodes, which is due to lower water content and thicker film. The increase in current values occurs at temperatures as low as 30 ° C, which cannot be observed with polymer III or with polymer III FLAG TAG electrodes. The coupled hydrophobic HA-TAG peptide displaces water from the polymer III network, resulting in the compression of the film even at room temperature. As a result, the film hardly compresses during the temperature rise. The current values increase in this case according to the increase in the temperature-dependent diffusion of the redox pair. These studies show that the HA-TAG peptide as an anchoring molecule is much better suited for a potential use of the polymer III films for sensory purposes since it is clearly different in the hydrophilicity of polymer III. KW - thermoresponsiv KW - Polymer KW - Biosensor KW - Cyclovoltammetrie KW - Elektrochemie KW - thermoresponsive KW - polymer KW - biosensor KW - cyclic voltammetry KW - electrochemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396551 ER - TY - THES A1 - Traeger, Juliane T1 - Ungesättigte Dithioetherliganden : selektive Extraktionsmittel für die Gewinnung von Palladium(II) aus Sekundärrohstoffen T1 - Unsaturated dithioether ligands : selective extractants for the recovery of Palladium(II) from secondary sources N2 - Die Entwicklung neuer Verfahren für die Rückführung von Palladium aus Altmaterialien, wie gebrauchten Autoabgaskatalysatoren, in den Stoffstromkreislauf ist sowohl aus ökologischer als auch ökonomischer Sicht erstrebenswert. In dieser Arbeit wurden neue Flüssig-Flüssig- und Fest-Flüssig-Extraktionsmittel entwickelt, mit denen Palladium(II) aus einer oxidierenden, salzsauren Laugungslösung, die neben Palladium auch Platin und Rhodium sowie zahlreiche unedle Metalle enthält, zurückgewonnen werden kann. Die neuen Extraktionsmittel ungesättigte monomere 1,2-Dithioether und oligomere Ligandenmischungen mit vicinalen Dithioether-Einheiten – sind im Gegensatz zu vielen in der Literatur aufgeführten Extraktionsmitteln hochselektiv. Aufgrund ihrer geometrischen und elektronischen Präorganisation bilden sie mit Palladium(II) stabile quadratisch-planare Chelatkomplexe. Für die Entwicklung des Flüssig-Flüssig-Extraktionsmittels wurde eine Reihe von ungesättigten 1,2-Dithioetherliganden dargestellt, welche auf einer starren 1,2-Dithioethen-Einheit, die in ein variierendes elektronenziehendes Grundgerüst eingebettet ist, basieren und polare Seitenketten besitzen. Neben der Bestimmung der Kristallstrukturen der Liganden und ihrer Palladiumdichlorid-Komplexe wurden die elektro- und photochemischen Eigenschaften, die Komplexstabilität und das Verhalten in Lösung untersucht. In Flüssig-Flüssig-Extraktionsuntersuchungen konnte gezeigt werden, dass einige der neuen Liganden industriell genutzten Extraktionsmitteln durch eine schnellere Einstellung des Extraktionsgleichgewichts überlegen sind. Anhand von Kriterien, die für eine industrielle Nutzbarkeit entscheidend sind, wie: guter Oxidationsbeständigkeit, einer hohen Extraktionsausbeute (auch bei hohen Salzsäurekonzentrationen der Speiselösung), schneller Extraktionskinetik und einer hohen Selektivität für Palladium(II) wurde aus der Reihe der sechs Liganden ein geeignetes Flüssig-Flüssig-Extraktionsmittel ausgewählt: 1,2-Bis(2-methoxyethylthio)benzen. Mit diesem wurde ein praxisnahes Flüssig-Flüssig-Extraktionssystem entwickelt. Nach der schrittweisen Adaption der wässrigen Phase von einer Modelllösung hin zu der oxidierenden, salzsauren Laugungslösung erfolgte die Auswahl eines geeigneten großtechnisch, einsetzbaren Lösemittels (1,2-Dichlorbenzen) und eines effizienten Reextraktionsmittels (0,5 M Thioharnstoff in 0,1 M HCl). Die hohe Palladium(II)-Selektivität dieses Flüssig-Flüssig-Extraktionssystems konnte verifiziert und seine Wiederverwendbarkeit und Praxistauglichkeit unter Beweis gestellt werden. Weiterhin wurde gezeigt, dass sich beim Kontakt mit oxidierenden Medien aus dem Dithioether 1,2-Bis(2-methoxyethylthio)benzen geringe Mengen des Thioethersulfoxids 1-(2-Methoxyethylsulfinyl)-2-(2-methoxyethylthio)benzen bilden. Dieses wird im sauren Milieu protoniert und beschleunigt die Extraktion wie ein Phasentransferkatalysator, ohne jedoch die Palladium(II)-Selektivität herabzusetzen. Die Kristallstruktur des Palladiumdichlorid-Komplexes des Tioethersulfoxids zeigt, dass der unprotonierte Ligand Palladium(II), analog zum Dithioether, über die chelatisierenden Schwefelatome koordiniert. Verschiedene Mischungen von Oligo(dithioether)-Liganden und der monomere Ligand 1,2-Bis(2-methoxyethylthio)benzen dienten als Extraktionsmittel für Fest-Flüssig-Extraktionsversuche mit SIRs (solvent impregnated resins) und wurden zu diesem Zweck auf hydrophilem Kieselgel und organophilem Amberlite® XAD 2 adsorbiert. Die Oligo(dithioether)-Liganden basieren auf 1,2-Dithiobenzen oder 1,2-Dithiomaleonitril-Einheiten, welche über Tris(oxyethylen)ethylen- oder Trimethylen-Brücken miteinander verknüpft sind. Mit Hilfe von Batch-Versuchen konnte gezeigt werden, dass sich strukturelle Unterschiede - wie die Art der chelatisierenden Einheit, die Art der verbrückenden Ketten und das Trägermaterial - auf die Extraktionsausbeuten, die Extraktionskinetik und die Beladungskapazität auswirken. Die kieselgelhaltigen SIRs stellen das Extraktionsgleichgewicht viel schneller ein als die Amberlite® XAD 2-haltigen. Jedoch bleiben die Extraktionsmittel auf Amberlite® XAD 2, im Gegensatz zu Kieselgel, dauerhaft haften. Im salzsauren Milieu sind die 1,2-Dithiobenzen-derivate besser als Extraktionsmittel geeignet als die 1,2-Dithiomaleonitrilderivate. In Säulenversuchen mit der oxidierenden, salzsauren Laugungslösung und wiederverwendbaren, mit 1,2-Dithiobenzenderivaten imprägnierten, Amberlite® XAD 2-haltigen SIRs zeigte sich, dass für die Realisierung hoher Beladungskapazitäten sehr geringe Pumpraten benötigt werden. Trotzdem konnte die gute Palladium(II)-Selektivität dieser Festphasenmaterialien demonstriert werden. Allerdings wurden in den Eluaten im Gegensatz zu den Eluaten, die aus Flüssig-Flüssig-Extraktion resultierten neben dem Palladium auch geringe Mengen an Platin, Aluminium, Eisen und Blei gefunden. N2 - The development of new processes for the recovery of palladium from recycling materials like spent automotive catalysts is of economic and ecologic interest. In this thesis new solvent and solid phase extractants have been designed, which are suitable for the recovery of palladium(II) from an oxidising hydrochloric leach liquor that does not only additionally contain platinum and rhodium but also a number of base metals. In contrast to many extractants described in the literature these new extractants – unsaturated monomeric dithioethers as well as oligomeric mixtures of ligands with vicinal dithioether units – are highly selective for palladium(II). Due to their geometric and electronic preorganisation they form stable square-planar chelate complexes with palladium(II). For the development of the solvent extractant a series of unsaturated dithioethers, which are based on a rigid 1,2-dithioethene unit that is imbedded in an electron-withdrawing backbone, with polar end-groups has been synthesised. In addition to the determination of the crystal structures of the ligands and their dichloridopalladium complexes, the electro- and photochemical properties, the complex stabilities and the behaviour in solution have been investigated. Solvent extraction experiments showed the superiority of some of our ligands over conventionally used extractants in terms of their very fast reaction rates. Considering criteria that are essential for industrial utilisation like: robustness towards oxidation, achieving of high extraction yields (even at a high hydrochloric acid content of the leach liquor), fast extraction kinetics and a high selectivity for palladium(II), 1,2-bis(2-methoxyethylthio)benzene was selected as the extractant of choice. Building on this a solvent extraction system close to industrial practice was devised. After stepwise adaption of the aqueous phase from a model solution to the oxidising hydrochloric leach liquor, the selection of a diluent suitable for commercial operations (1,2-dichlorobenzene) and of an efficient stripping agent (0.5 M thiourea in 0.1 M HCl) has been accomplished. The high selectivity of that solvent extraction system for palladium(II) could be verified and its reusability and suitability for practical application have been proven. Further it was shown that small amounts of the thioether sulfoxide 1-[(2-methoxyethyl)sulfanyl]-2-[(2-methoxyethyl)sulfinyl]benzene form when the dithioether ligand 1,2-bis(2-methoxyethylthio)benzene gets in contact with oxidising media. Under acidic conditions this thioether sulfoxide gets protonated and accelerates the extraction like a phase transfer catalyst; without decreasing the selectivity for palladium(II). The molecular structure of the corresponding dichloridopalladium complex reveals that the nonprotonated ligand coordinates palladium(II) in a similar manner to the dithioether via the chelating sulfur atoms. Mixtures of oligo(dithioether) ligands and the monomeric 1,2-bis(2-methoxyethylthio)benzene have been adsorbed on silica gel and amberlite® XAD 2. These SIRs (solvent impregnated resins) have been used for solid phase extraction experiments. The oligo(dithioether) ligands are based on 1,2- dithiobenzene or 1,2-dithiomaleonitrile units, which are connected via tris(oxyethylene)ethylene or trimethylene chains. With the help of batch experiments it could be shown how structural differences, like the chelating unit, the kind of linking chain and the type of supporting material, impact the extraction yield, kinetics and loading capacity. The SIRs containing silica gel establish the extraction equilibrium much faster than those containing amberlite® XAD 2. On the other hand, the extractants permanently remain on amberlite® XAD 2, in contrast to silica gel. In a hydrochloric medium 1,2-dithiobenzene derivatives are better extractants than 1,2-dithiomaleonitrile derivatives. In column experiments with the oxidising hydrochloric leach liquor and reusable SIRs based on 1,2-dithiobenzene derivatives impregnated into amberlite® XAD 2, it appeared that for the implementation of high loading capacities very low flow rates are required. The selectivity for palladium(II) of these solid phase extractants could be demonstrated, although the eluates, in contrast to the eluates gained from the solvent extraction experiments, contained not only palladium but also small amounts of platinum, aluminium, iron and lead. KW - Palladium KW - Schwefel-Ligand KW - Chelate KW - Ligandendesign KW - Flüssig-Flüssig-Extraktion KW - Fest-Flüssig-Extraktion KW - palladium KW - sulfur ligands KW - chelates KW - ligand design KW - solvent extraction KW - solid phase extraction Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64753 ER - TY - GEN A1 - Peter, Martin G. A1 - Stupp, Hans-Peter A1 - Lentes, Klaus-Ulrich T1 - Umkehr der Enantioselektivität bei der enzymatischen Hydrolyse von Juvenilhormon als Ergebnis einer Proteinfraktionierung N2 - Aus dem Inhalt: Die Juvenilhormone 1a-c werden im Blut von Insekten enzymatisch zu den biologisch inaktiven Sluren hydrolysiert. Bei der Hydrolyse von racemischem 1c im Blut der Wanderheuschrecke Locusta migratoria wird ein Umsatz von 40-60% erreicht. Das unumgesetzte Edukt enthällt einen Überschuß an natürlich konfiguriertem (10R)-1c (e.e. 47.2%). Wir konnten zeigen, daß das in der Hämolymphe vorhandene Hormon-Bindungsprotein bevorzugt mit (10R)- 1c assoziiert. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 052 Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17001 ER - TY - THES A1 - Bilkay, Taybet T1 - Thiophen und Benzodithiophen basierte organische Halbleiter für aus Lösung prozessierbare Feldeffekttransistoren T1 - Thiophene and benzodithiophene based organic semiconductors for solution processable field effect transistors N2 - Diese Arbeit befasst sich mit der Synthese und Charakterisierung von organolöslichen Thiophen und Benzodithiophen basierten Materialien und ihrer Anwendung als aktive lochleitende Halbleiterschichten in Feldeffekttransistoren. Im ersten Teil der Arbeit wird durch eine gezielte Modifikation des Thiophengrundgerüstes eine neue Comonomer-Einheit für die Synthese von Thiophen basierten Copolymeren erfolgreich dargestellt. Die hydrophoben Hexylgruppen in der 3-Position des Thiophens werden teilweise durch hydrophile 3,6-Dioxaheptylgruppen ersetzt. Über die Grignard-Metathese nach McCullough werden statistische Copolymere mit unterschiedlichen molaren Anteilen vom hydrophoben Hexyl- und hydrophilem 3,6-Dioxaheptylgruppen 1:1 (P-1), 1:2 (P-2) und 2:1 (P-3) erfolgreich hergestellt. Auch die Synthese eines definierten Blockcopolymers BP-1 durch sequentielle Addition der Comonomere wird realisiert. Optische und elektrochemische Eigenschaften der neuartigen Copolymere sind vergleichbar mit P3HT. Mit allen Copolymeren wird ein charakteristisches Transistorverhalten in einem Top-Gate/Bottom-Kontakt-Aufbau erhalten. Dabei werden mit P-1 als die aktive Halbleiterschicht im Bauteil, PMMA als Dielektrikum und Silber als Gate-Elektrode Mobilitäten von bis zu 10-2 cm2/Vs erzielt. Als Folge der optimierten Grenzfläche zwischen Dielektrikum und Halbleiter wird eine Verbesserung der Luftstabilität der Transistoren über mehrere Monate festgestellt. Im zweiten Teil der Arbeit werden Benzodithiophen basierte organische Materialien hergestellt. Für die Synthese der neuartigen Benzodithiophen-Derivate wird die Schlüsselverbindung TIPS-BDT in guter Ausbeute dargestellt. Die Difunktionalisierung von TIPS-BDT in den 2,6-Positionen über eine elektrophile Substitution liefert die gewünschten Dibrom- und Distannylmonomere. Zunächst werden über die Stille-Reaktion alternierende Copolymere mit alkylierten Fluoren- und Chinoxalin-Einheiten realisiert. Alle Copolymere zeichnen sich durch eine gute Löslichkeit in gängigen organischen Lösungsmitteln, hohe thermische Stabilität und durch gute Filmbildungseigenschaften aus. Des Weiteren sind alle Copolymere mit HOMO Lagen höher als -6.3 eV, verglichen mit den Thiophen basierten Copolymeren (P-1 bis P-3), sehr oxidationsstabil. Diese Copolymere zeigen amorphes Verhalten in den Halbleiterschichten in OFETs auf und es werden Mobilitäten bis zu 10-4 cm2/Vs erreicht. Eine Abhängigkeit der Bauteil-Leistung von dem Zinngehalt-Rest im Polymer wird nachgewiesen. Ein Zinngehalt von über 0.6 % kann enormen Einfluss auf die Mobilität ausüben, da die funktionellen SnMe3-Gruppen als Fallenzustände wirken können. Alternativ wird das alternierende TIPS-BDT/Fluoren-Copolymer P-5-Stille nach der Suzuki-Methode polymerisiert. Mit P-5-Suzuki als die aktive organische Halbleiterschicht im OFET wird die höchste Mobilität von 10-2 cm2/Vs erzielt. Diese Mobilität ist somit um zwei Größenordnungen höher als bei P-5-Stille, da die Fallenzustände in diesem Fall minimiert werden und folglich der Ladungstransport verbessert wird. Sowohl das Homopolymer P-12 als auch das Copolymer mit dem aromatischen Akzeptor Benzothiadiazol P-9 führen zu schwerlöslichen Polymeren. Aus diesem Grund werden einerseits Terpolymere aus TIPS-BDT/Fluoren/BTD-Einheiten P-10 und P-11 aufgebaut und andererseits wird versucht die TIPS-BDT-Einheit in die Seitenkette des Styrols einzubringen. Mit der Einführung von BTD in die Hauptpolymerkette werden insbesondere die Absorptions- und die elektrochemischen Eigenschaften beeinflusst. Im Vergleich zu dem TIPS-BDT/Fluoren-Copolymer reicht die Absorption bis in den sichtbaren Bereich und die LUMO Lage wird zu niederen Werten verschoben. Eine Verbesserung der Leistung in den Bauteilen wird jedoch nicht festgestellt. Die erfolgreiche erstmalige Synthese von TIPS-BDT als Seitenkettenpolymer an Styrol P-13 führt zu einem löslichen und amorphen Polymer mit vergleichbaren Mobilitäten von Styrol basierten Polymeren (µ = 10-5 cm2/Vs) im OFET. Ein weiteres Ziel dieser Arbeit ist die Synthese von niedermolekularen organolöslichen Benzodithiophen-Derivaten. Über Suzuki- und Stille-Reaktionen ist es erstmals möglich, verschiedenartige Aromaten über eine σ-Bindung an TIPS-BDT in den 2,6-Positionen zu knüpfen. Die UV/VIS-Untersuchungen zeigen, dass die Absorption durch die Verlängerung der π-Konjugationslänge zu höheren Wellenlängen verschoben wird. Darüber hinaus ist es möglich, thermisch vernetzbare Gruppen wie Allyloxy in das Molekülgerüst einzubauen. Das Einführen von F-Atomen in das Molekülgerüst resultiert in einer verstärkten Packungsordnung im Fluorbenzen funktionalisiertem TIPS-BDT (SM-4) im Festkörper mit sehr guten elektronischen Eigenschaften im OFET, wobei Mobilitäten bis zu 0.09 cm2/Vs erreicht werden. N2 - This work describes the synthesis and characterization of organo-soluble thiophene and benzodithiophene based materials and their application as hole-transporting active semiconductor layers in field effect transistors. The first part of this work introduces the targeted modification of the thiophene base unit, obtaining new comonomers for the corresponding copolymers. The hydrophobic hexyl groups in the 3-position of thiophene are partially replaced by hydrophilic 3,6-Dioxaheptyl groups. Using the Grignard metathesis developed by McCullough, statistical copolymers with different molar ratios of hydrophobic and hydrophilic side groups 1:1 (P-1), 1:2 (P-2) and 2:1 (P-3) are synthesized. Furthermore a defined blockcopolymer is synthesized by a sequential comonomer addition. Optical and electrochemical properties of the novel copolymers are comparable to the homopolymer P3HT. All copolymers show clearly transistor characteristics in a top-gate/bottom-contact configuration. Devices with P-1 as active semiconductor layer, PMMA as dielectric and silver as the gate electrode show mobilities up to 10-2 cm2/Vs. As a result of the optimized semiconductor and dielectric interface an improvement of the air stability of the transistors is observed for several months. The second part describes the synthesis of benzodithiophene based organic materials. For the synthesis of the novel benzodithiophene-derivatives the key intermediate TIPS-BDT is obtained in high yields. A difunctionalization of TIPS-BDT in 2,6-position is observed by electrophilic substitution reactions and provided the desired dibromo- and distannyl-monomers. Via Stille-reaction alternated copolymers with alkylated fluorene and quinoxaline groups are synthesized. All copolymers are soluble in common organic solvents, show high thermal stability and good film forming properties. Furthermore all copolymers have HOMO values above -6.3 eV and are more oxidation stable compared to the thiophene based copolymers (P-1 up to P-3). These copolymers show an amorphous behavior as semiconductor layer in OFETs and mobilities up to 10-4 cm2/Vs are observed. A correlation between the device performance and the tin amount in the polymer could be demonstrated. Hence the functional SnMe3 groups can act as traps, a tin amount higher than 0.6 % can negatively influence the mobility. Alternatively the alternated TIPS-BDT/Fluoren-copolymer P-5-Stille is polymerized by the Suzuki-Method. The highest mobility of 10-2 cm2/Vs is obtained with P-5-Suzuki as active semiconductor layer in OFET. In comparison to P-5-Stille this mobility is two orders of magnitude higher, because in P-5-Suzuki traps are minimized and the charge transfer is improved. The synthesis of homopolymer P-12 as well as the copolymer with aromatic benzothiadiazole P-9 resulted in insoluble polymers. For this reason terpolymers containing TIPS-BDT/Fluoren/BTD units are designed. Additionally an attempt has been made to introduce the TIPS-BDT unit in the side chain of styrene. The introduction of BTD in the conjugated main chain influences especially the absorption and electrochemical properties. Compared to TIPS-BDT/Fluoren-copolymer the absorption of the terpolymer is shifted to the visible region and the LUMO values decreased. An improvement in the device performance is not observed. A side chain polystyrene containing TIPS-BDT P-13 is synthesized successfully. The amorphous and soluble P-13 showed comparable mobilities (µ = 10-5 cm2/Vs) as known styrene based polymers. A further aim of this work is the synthesis of organo-soluble benzodithiophene based small molecules. Using Suzuki- and Stille-reactions different aromatic cores as endcappers are connected by σ-bonds at the 2,6-position of TIPS-BDT. UV/VIS-measurements show a red-shift of the absorption maxima with extension of the π-conjugated system. Furthermore it is possible to introduce thermal cross linkable allyloxy-groups. The F-atoms in the molecule lead to stronger intermolecular interactions in the solid state, which improves the electronic properties and lead to high mobilities up to 0.09 cm2/Vs for TIPS-BDT (SM-4). KW - Thiophen und Benzodithiophen Copolymere KW - konjugierte kleine Moleküle KW - organische Halbleiter KW - OFET KW - Ladungstransport KW - Thiophene and Benzodithiophene copolymers KW - conjugated small molecules KW - organic semiconductors KW - OFET KW - charge transfer Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66164 ER - TY - THES A1 - Freyse, Daniel T1 - Thioacetal-Bausteine für Fluoreszenzfarbstoffe und molekulare Stäbe T1 - Thioacetal building blocks for fluorescent dyes and molecular rods N2 - Im Rahmen dieser Dissertation wurde der Sauerstoff im Grundgerüst der [1,3]-Dioxolo[4.5-f]benzodioxol-Fluoreszenzfarbstoffe (DBD-Fluoreszenzfarbstoffe) vollständig mit Schwefel ausgetauscht und daraus eine neue Klasse von Fluoreszenzfarbstoffen entwickelt, die Benzo[1,2-d:4,5-d']bis([1,3]dithiol)-Fluorophore (S4-DBD-Fluorophore). Insgesamt neun der besonders interessanten, difunktionalisierten Vertreter konnten synthetisiert werden, die sich in ihren elektronenziehenden Gruppen und in ihrer Anordnung unterschieden. Durch den Austausch von Sauerstoff mit Schwefel kam es zu teilweise auffälligen Veränderungen in den Fluoreszenzparametern, wie eine Abnahme der Fluoreszenzquantenausbeuten und -lebenszeiten aber auch eine deutliche Rotverschiebung in den Absorptions- und Emissionswellenlängen mit großen STOKES-Verschiebungen. Damit sind die S4-DBD-Fluorophore eine wertvolle Ergänzung für die DBD-Farbstoffe. Die Ursachen für die Abnahme der Lebenszeiten und Quantenausbeuten konnte auf eine hohe Besetzung des Triplett-Zustandes zurückgeführt werden, welcher durch die verstärkten Spin-Bahn-Kopplungen des Schwefels hervorgerufen wird. Zusammen mit dem Arbeitskreis physikalische Chemie der Universität Potsdam konnten auch die photophysikalischen Prozesse über die Transienten-Absorptionsspektroskopie (TAS) aufgeklärt werden. Eine Strategie zur Funktionalisierung der S4-DBD-Farbstoffe am Thioacetalgerüst konnte entwickelt werden. So gelang es Alkohol-, Propargyl-, Azid-, NHS-Ester-, Carbonsäure-, Maleimid- und Tosyl-Gruppen an S4-DBD-Dialdehyden anzubringen. Erweiternd wurden molekulare Stäbe auf Basis von Schwefel-Oligo-Spiro-Ketalen (SOSKs) untersucht, bei denen Sauerstoff durch Schwefel ersetzt wurde. Hier konnten die Synthesen der löslichkeitsvermittelnden TER-Muffe und auch des Tetrathiapentaerythritols als Grundbaustein deutlich verbessert werden. Aus diesen konnte ein einfaches SOSK-Polymer hergestellt werden. Weitere Versuche zum Aufbau eines Stabes müssen aber noch untersucht werden. Um einen S-OSK-Stab aufzubauen hat sich dabei die Dithiocarbonat-Gruppe in ersten Versuchen als potenzielle geeignete Schutzgruppe für das Tetrathiapentaerythritol herausgestellt. N2 - In this Thesis, the oxygen in the structure of the [1,3]-dioxolo[4.5-f]benzodioxole fluorescent dyes (DBD) was completely exchanged with sulfur and from this a new class of fluorescent dyes were developed, the S4-DBD fluorophores. A total of nine of the particularly interesting bifunctional representatives could be synthesized, which differ in their electron-withdrawing groups and their arrangements. The exchange of the oxygen with sulfur causes striking changes in the fluorescence parameters, such as a decrease in the fluorescence quantum yields and lifetimes and a distinct red shifting of the absorption and emission wavelengths with large STOKESShifts. This makes the S4-DBD fluorophores a valuable addition to the DBD dyes. The causes for the decrease in lifetimes and quantum yields could be traced back to a high triplet state occupancy, which is caused by the increased spin-orbit coupling of the sulfur atoms. The photophysical processes after absorption could also be revealed via the transient absorption spectroscopy (TAS) during a cooperation with the Department of Physical Chemistry of the University of Potsdam. In order to influence the photophysical properties as little as possible, a strategy for functionalizing the S4-DBD dyes on the thioacetal structure could be developed. Using the example of S4-DBD dialdehyde, alcohol, propargyl, azide, NHS ester, carboxylic acid, maleimide and tosyl groups could be succesfuly obtained. Another area in this thesis, where the exchange of oxygen with sulfur was investigated, are molecular rods based on sulfur-oligo-spiro-ketals (S-OSK). Here, the syntheses of the solubilizing TER-Sleeves and also of tetrathiapentaerythritol as a basic building block could be significantly improved. A simple S-OSK polymer could be produced from these, but further attempts to build a rod have yet to be investigated. In order to build up an S-OSK rod, the dithiocarbonate group turned out to be a potentially suitable protective group for the tetrathiapentaerythritol. KW - organische Chemie KW - organic chemistry KW - Fluoreszenzfarbstoffe KW - Fluorescent Dyes KW - Fluorophore KW - Fluorophores KW - Thioacetale KW - Thioacetals Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549252 ER - TY - THES A1 - Boese, Adrian Daniel T1 - Theorie und Berechnung intermolekularer Wechselwirkungen T1 - Theory and computation of intermolecular interactions N2 - Die klassische Physik/Chemie unterscheidet zwischen drei Bindungstypen: Der kovalenten Bindung, der ionischen Bindung und der metallischen Bindung. Moleküle untereinander werden hingegen durch schwache Wechselwirkungen zusammen gehalten, sie sind trotz ihrer schwachen Kräfte weniger verstanden, aber dabei nicht weniger wichtig. In zukunftsweisenden Gebieten wie der Nanotechnologie, der Supramolekularen Chemie und Biochemie sind sie von elementarer Bedeutung. Um schwache, intermolekulare Wechselwirkungen zu beschreiben, vorauszusagen und zu verstehen, sind sie zunächst theoretisch zu erfassen. Hierzu gehören verschiedene quantenchemische Methoden, die in dieser Arbeit vorgestellt, verglichen, weiterentwickelt und schließlich auch exemplarisch auf Problemstellungen in der Chemie angewendet werden. Aufbauend auf einer Hierarchie von Methoden unterschiedlicher Genauigkeit werden sie für diese Ziele eingesetzt, ausgearbeitet und kombiniert. Berechnet wird die Elektronenstruktur, also die Verteilung und Energie von Elektronen, die im Wesentlichen die Atome zusammen halten. Da Ungenauigkeiten von der Beschreibung der Elektronenstruktur von den verwendeten Methoden abhängen, kann man die Effekte detailliert untersuchen, sie beschreiben und darauf aufbauend weiter entwickeln, um sie anschließend an verschiedenen Modellen zu testen. Die Geschwindigkeit der Berechnungen mit modernen Computern ist eine wesentliche, zu berücksichtigende Komponente, da im Allgemeinen die Genauigkeit mit der Rechenzeit exponentiell steigt, und die damit an die Grenzen der Möglichkeiten stoßen muss. Die genaueste der verwendeten Methoden basiert auf der Coupled-Cluster-Theorie, die sehr gute Voraussagen ermöglicht. Für diese wird eine sogenannte spektroskopische Genauigkeit mit Abweichungen von wenigen Wellenzahlen erzielt, was Vergleiche mit experimentellen Daten zeigen. Eine Möglichkeit zur Näherung von hochgenauen Methoden basiert auf der Dichtefunktionaltheorie: Hier wurde das „Boese-Martin for Kinetics“ (BMK)-Funktional entwickelt, dessen Funktionalform sich in vielen nach 2010 veröffentlichten Dichtefunktionalen wiederfindet. Mit Hilfe der genaueren Methoden lassen sich schließlich semiempirische Kraftfelder zur Beschreibung intermolekularer Wechselwirkungen für individuelle Systeme parametrisieren, diese benötigen weit weniger Rechenzeit als die Methoden, die auf der genauen Berechnung der Elektronenstruktur von Molekülen beruhen. Für größere Systeme lassen sich auch verschiedene Methoden kombinieren. Dabei wurden Einbettungsverfahren verfeinert und mit neuen methodischen Ansätzen vorgeschlagen. Sie verwenden sowohl die symmetrieadaptierte Störungstheorie als auch die quantenchemische Einbettung von Fragmenten in größere, quantenchemisch berechnete Systeme. Die Entwicklungen neuer Methoden beziehen ihren Wert im Wesentlichen durch deren Anwendung: In dieser Arbeit standen zunächst die Wasserstoffbrücken im Vordergrund. Sie zählen zu den stärkeren intermolekularen Wechselwirkungen und sind nach wie vor eine Herausforderung. Im Gegensatz dazu sind van-der-Waals Wechselwirkungen relativ einfach durch Kraftfelder zu beschreiben. Deshalb sind viele der heute verwendeten Methoden für Systeme, in denen Wasserstoffbrücken dominieren, vergleichsweise schlecht. Eine Untersuchung molekularer Aggregate mit Auswirkungen intermolekularer Wechselwirkungen auf die Schwingungsfrequenzen von Molekülen schließt sich an. Dabei wird auch über die sogenannte starrer-Rotor-harmonischer-Oszillator-Näherung hinausgegangen. Eine weitreichende Anwendung behandelt Adsorbate, hier die von Molekülen auf ionischen/metallischen Oberflächen. Sie können mit ähnlichen Methoden behandelt werden wie die intermolekularen Wechselwirkungen, und sind mit speziellen Einbettungsverfahren sehr genau zu beschreiben. Die Resultate dieser theoretischen Berechnungen stimulierten eine Neubewertung der bislang bekannten experimentellen Ergebnisse. Molekulare Kristalle sind ein äußerst wichtiges Forschungsgebiet. Sie werden durch schwache Wechselwirkungen zusammengehalten, die von van-der-Waals Kräften bis zu Wasserstoffbrücken reichen. Auch hier wurden neuentwickelte Methoden eingesetzt, die eine interessante, mindestens ebenso genaue Alternative zu den derzeit gängigen Methoden darstellen. Von daher sind die entwickelten Methoden, als auch deren Anwendung äußerst vielfältig. Die behandelten Berechnungen der Elektronenstruktur erstrecken sich von den sogenannten post-Hartree-Fock-Methoden über den Einsatz der Dichtefunktionaltheorie bis zu semiempirischen Kraftfeldern und deren Kombinationen. Die Anwendung reicht von einzelnen Molekülen in der Gasphase über die Adsorption auf Oberflächen bis zum molekularen Festkörper. N2 - In classical chemistry and physics, three basic categories of chemical bonds between atoms are usually distinguished, the covalent, ionic and metallic bond. However, molecules are held together by so-called weak intermolecular interactions. Despite the rather small forces working together in supramolecular chemistry, which is the chemistry beyond the molecules, they are not of minor importance. The solid state of organic material is based on such forces and in future subjects like nanotechnology or biochemistry, they are of utmost interest. Unfortunately, they are little understand For a better knowledge it is desired to theoretically characterise, to compute the interactions and finally to compare them with experimental data. Quantum mechanical methods are the choice of methods, which are introduced, developed, and compared among each other in this work. Based on a hierarchy of methods of different accuracy, they are applied, elaborated and combined. Finally, they are employed to chemical problems. Such calculations are performed on the electronic structure, i.e. the distribution and energy of the electrons, which basically keep the atoms together. Since the accuracy of the methods depends on the accurate description of the electronic structure, we can scrutinize the effects, describe and further develop it in order to test it on chemical model systems. The speed of such calculations with modern computers is very important, as the accuracy of electronic structure methods increases exponentially with computing time that is of course limited. One of the most accurate electronic structure methods is based on the coupled-cluster theory, this is considered as the “gold standard” in quantum chemistry. It yields ‘spectroscopic accuracy’ for intermolecular interactions with deviations of just a couple of wavenumbers, as comparisons with experiments demonstrate. Another possibility to approximate such high-accuracy methods is density functional theory: the functional form of the “Boese-Martin for Kinetics” functional, introduced in this work, is nowadays utilized in several newly developed functionals. With such methods, semiempirical force fields can be parametrized for the description of intermolecular interactions for certain systems. As semiempirical force fields use a fraction of the computer time needed compared to density functional theory or coupled-cluster methods, this provides a big advantage. For even larger systems, we can combine such electronic structure methods. Here, embedding methods have been refined and developed. These include symmetry adapted perturbation theory as well as the quantum mechanical embedding of fragments into larger systems which are also computed with more approximate quantum mechanical methods. The development of such novel methods is more valuable when they are applied to chemical systems and problems: In this work, we first focused on hydrogen bonds. These are relatively strong intermolecular interactions and are likewise theoretically rather challenging, whereas van-der-Waals interactions are described rather well by simple force fields. Thus, the former hydrogen bonds are still inadequately described by many modern methods. Furthermore, molecular aggregates have been investigated with special attention to their vibrational frequencies, for which we went beyond the rigid-rotor-harmonic-oscillator approximation. Another application is on adsorbates of molecules at ionic and metallic surfaces. Here, similar methods can be applied as for the intermolecular interactions, and they can be calculated to high accuracy by using special embedding techniques. The outcome of these computations stimulated a re-assessment of experimental benchmark values. Finally, the characterization of molecular crystals is an increasingly growing field of research. These crystals are held together by weak interactions, ranging from van-der-Waals interactions to hydrogen bonds. The newly developed methods were used to compute such crystals and are an alternative to the currently employed methods. Thus, the developed methods as well as their application span a wide range: from post-Hartree-Fock methods to density functional theory and semiempirical force fields and their combinations. Their application reaches from the intermolecular interactions from single gas phase molecules to surfaces up to the solid state in molecular crystals. KW - intermolekulare Wechselwirkungen KW - Dichtefunktionaltheorie KW - Post-Hartree-Fock Methoden KW - Molekülkristalle KW - Oberflächen KW - anharmonische Kraftfelder KW - intermolecular interactions KW - molecular crystals KW - surfaces KW - anharmonic force fields KW - Density Functional Theory KW - Post-Hartree Fock methods Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-412867 ER - TY - THES A1 - Berthold, Thomas T1 - Tannine für nachhaltige und funktionale Kohlenstoffmaterialien T1 - Tannins for sustainable and functional carbon materials BT - Synthesestrategien und mögliche Anwendungen BT - synthetic strategies and applications N2 - In Zeiten eines sich schnell ändernden und vielseitigen Energiemarktes müssen Kohlenstoffmaterialien für verschiedene Anforderungen einsetzbar sein. Dies erfordert flexibel synthetisierbare Kohlenstoffmaterialien bevorzugt aus günstigen und nachhaltigen Kohlenstoffquellen. Es ist allerdings nicht leicht Vorläuferverbindungen auszumachen, welche sich einerseits für verschiedene Herstellungsverfahren eignen und deren Kohlenstoffprodukte andererseits in spezifischen Eigenschaften, wie der Struktur, des Stickstoffanteils, der Oberfläche und der Porengrößen, eingestellt werden können. In diesem Zusammenhang können natürliche Polyphenole, etwa überschüssige Tannine aus der Weinproduktion, eine neue Welt zu hoch funktionalen und vielseitig einstellbaren Kohlenstoffmaterialien mit hohen Ausbeuten öffnen. Das Hauptziel dieser vorliegenden Thesis war es neue funktionale, einstellbare und skalierbare nanostrukturierte Kohlenstoffmaterialien aus Tanninen (insbesondere Tanninsäure) für unterschiedliche elektrochemische Zwecke zu synthetisieren und zu charakterisieren. Ermöglicht wurde dies durch unterschiedliche synthetische Herangehensweisen, wie etwa der polymeren Strukturdirektion, dem ionothermalen Templatieren und der weichen Templatierung. An Stelle des weitläufig gebräuchlichen, aber kanzerogenen Vernetzungsagens Formaldehyd wurden bei den vorgestellten Synthesen Harnstoff und Thioharnstoff gewählt, um zugleich die synthetisierten Kohlenmaterialien variabel dotieren zu können. Daher wurden im ersten Teil der Arbeit die Wechselwirkungen, Reaktionen und thermischen Verhaltensweisen von Tanninsäure und Mixturen von Tanninsäure und Harnstoff bzw. Thioharnstoff untersucht, um daraus wichtige Erkenntnisse für die verschiedenen Kohlenstoffsynthesen zu gewinnen. Durch die Verwendung eines polymeren Strukturierungsagenz Pluronic P123 konnten in einer ersten Kohlenstoffsynthese nachhaltige und dotierbare Kohlenstoffpartikel mit Durchmessern im Nanometerbereich aus Tanninsäure und Harnstoff hergestellt werden. Es konnte dabei gezeigt werden, dass durch die Modifikation der verschiedenen Syntheseparameter die Kohlenstoffnanopartikel gemäß ihres gemittelten Partikeldurchmessers, ihrer BET-Oberfläche, ihrer Komposition, ihrer Leitfähigkeit und ihrer chemischen Stabilität einstellbar sind. Dies eröffnete die Möglichkeit diese Kohlenstoffpartikel als alternatives und nachhaltiges Rußmaterial einzusetzen. Weiterhin war es durch die ionothermale Templatierung möglich poröse, dotierte und kontrollierbare Kohlenstoffpartikel mit hohen spezifischen Oberflächen aus den gewählten Präkursorverbindungen zu synthetisieren, die sich für den Einsatz in Superkondensatoren eignen. Auf diesen Erkenntnissen aufbauend konnten mittels der Rotationsbeschichtung poröse binderfreie und strukturierte Kohlenstofffilme synthetisiert werden, die eine spinodale Struktur aufwiesen. Anhand der Modifikation der Stammlösungskonzentration, der Rotationsgeschwindigkeit und der verwendeten Substrate konnten die Filmdicke (100-1000 nm), die Morphologie und Gesamtoberfläche gezielt beeinflusst werden. Die erweiterte elektrochemische Analyse zeigte außerdem ein sehr gut zugängliches Porensystem der porösen Kohlenstofffilme. Allumfassend konnten demnach verschiedene Synthesewege für Kohlenstoffmaterialien aus Tanninen aufgezeigt werden, die verschiedenartig strukturiert und kontrolliert werden können und sich für diverse Anwendungsgebiete eignen. N2 - In times of a fast changing and versatile energy market, carbon materials have to be applicable for various demands.1,2 This requires custom-designed carbons, preferably from cheap and renewable carbon sources. However, it is challenging to find a carbon precursor system, which can be used and tuned either in different kinds of fabrication techniques and/or in properties like structure, nitrogen content, surface area, and pore sizes for specific innovative demands. Using polyphenols such as abundant tannins as carbon-precursor open the box for highly functionalized and versatile tunable carbon materials in combination with high yields. Hence, the main objective of this thesis was to synthesize and characterize new functional, tunable, and scalable nanostructured carbon materials from tannins (especially tannic acid) for different electrochemical purposes. This was targeted by different synthetic strategies including polymeric agent structuring, an ionothermal approach and soft templating.3-6 Moreover, instead of using the cancerogenous formaldehyde as cross-linker, urea and thiourea were used as linking and doping agents.7 In this respect, the first topic dealt with the understanding and investigation of the interactions, reactions and thermal behavior during the pyrolysis step of tannic acid/urea and tannic acid/thiourea mixtures. In a first carbon synthesis the tri-block-polymer Pluronic P123 acted as structuring agent in combination with the natural precursors.4 This enabled the preparation of sustainable and controllable doped carbon spheres with diameters down to 20 nm. Properties, like particle size, BET-surface area, composition, conductivity, and chemical stability could be tuned by controlling synthetic parameters. In addition, specifically synthesized carbon particles from tannic acid and urea showed similar conductivity and performance compared to a commercial conductive soot in a standard Li-battery anode. Therefore, these carbon particles can be considered as an alternative and sustainable soot in the future. Moreover, tunable and highly porous doped carbon spheres could be synthesized by an ionothermal approach. This enables the application of the porous carbon spheres in supercapacitor devices.6 The third part of the thesis benefited from the preliminary outcomes of the first structuring agent based synthesis. Hence, the precursor system composed of tannic acid, urea and Pluronic P123 was used to prepare porous carbon films with spinodal morphology via spin coating. By varying the synthetic conditions such as stock solution concentration and rotation speed, the carbon film thickness could be tuned, which in turn allowed for the control of the total surface area. The enlarged electrochemical analysis showed an accessible pore system of the porous carbon films. In summary, different synthetic strategies for carbon materials from tannins could be shown, which were structured and controlled in various ways. The possible fields of application for these carbon materials reach from conductive soot over supercapacitors to batteries. KW - Tannine KW - Kohlenstoffsynthese KW - Harnstoff KW - Kohlenstoffpartikel KW - Kohlenstofffilme KW - Leitruss KW - Dotierung KW - Pyrolyse KW - tannins KW - carbon synthesis KW - urea KW - carbon particle KW - carbon films KW - conducting soot KW - doping KW - pyrolysis Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-407564 ER - TY - GEN A1 - Peter, Martin G. A1 - Boldt, Peter C. A1 - Niederstein, Yvonne A1 - Peter-Katalinić, Jasna T1 - Synthesen von Galactose-Cluster-haltigen Steroid-Derivaten N2 - The synthesis of galactose clusters that are linked to a steroid moiety by a peptide-like spacer unit is described. The galactose cluster is obtained by Koenigs-Knorr glycosylation of TRIS-Gly-Fmoc (2b) under Helferich conditions. Peptide and ester bonds are formed after activation of carboxylic acids as diphenylthiophene dioxide (TDO) esters. 6a is synthesized in a convergent way by coupling of (Ac4Gal)3-TRIS-Gly (3e) with cholesteryl TDO succinate (5b). Coupling of (Ac4Gal)3-TRIS-Gly hydrogen succinate (3f) with Gly-O-Chol (5d) by means of EEDQ yields 6d. Reaction of (Ac4Gal)3-TRIS-Gly-SUCC-O-TDO (3g) with 25-hydroxycholesterol leads in a linear sequence to the oxysterol derivative 6f. Selective cleavage of the acetyl groups from galactose units yields the known compound 6b and the new derivatives 6e and 6g. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 042 KW - Glycoconjugates KW - Galactosides KW - Steroid esters KW - Amphiphiles KW - Glycopeptides Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-16783 ER - TY - THES A1 - Winkler, Henning T1 - Synthese von thermoplastisch verarbeitbaren Fettsäure-Acylderivaten der Stärke und Proteine T1 - Synthesis of thermoplastic processable fatty acid acyl derivatives of starch and proteins N2 - In den vergangenen Jahren wurden stetig wachsende Produktionskapazitäten von Biokunststoffen aus nachwachsenden Rohstoffe nverzeichnet. Trotz großer Produktionskapazitäten und einem geeigneten Eigenschaftsprofil findet Stärke nur als hydrophile, mit Weichmachern verarbeitete thermoplastische Stärke (TPS) in Form von Blends mit z. B. Polyestern Anwendung. Gleiches gilt für Kunststoffe auf Proteinbasis. Die vorliegende Arbeit hat die Entwicklung von Biokunststoffen auf Stärkebasis zum Ziel, welche ohne externe Weichmacher thermoplastisch verarbeitbar und hydrophob sind sowie ein mechanisches Eigenschaftsprofil aufweisen, welches ein Potenzial zur Herstellung von Materialien für eine Anwendung als Verpackungsmittel bietet. Um die Rohstoffbasis für Biokunststoffe zu erweitern, soll das erarbeitete Konzept auf zwei industriell verfügbare Proteintypen, Zein und Molkenproteinisolat (WPI), übertragen werden. Als geeignete Materialklasse wurden Fettsäureester der Stärke herausgearbeitet. Zunächst fand ein Vergleich der Säurechlorid-Veresterung und der Umesterung von Fettsäurevinylestern statt, woraus letztere als geeignetere Methode hervorging. Durch Variation der Reaktionsparameter konnte diese optimiert und auf eine Serie der Fettsäurevinylester von Butanoat bis Stearat für DS-Werte bis zu 2,2-2,6 angewandt werden. Möglich war somit eine systematische Studie unter Variation der veresterten Fettsäure sowie des Substitutionsgrades (DS). Sämtliche Produkte mit einem DS ab 1,5 wiesen eine ausgprägte Löslichkeit in organischen Lösungsmitteln auf wodurch sowohl die Aufnahme von NMR-Spektren als auch Molmassenbestimmung mittels Größenausschlusschromatographie mit gekoppelter Mehrwinkel-Laserlichtstreuung (GPC-MALLS) möglich waren. Durch dynamische Lichtstreuung (DLS) wurde das Löslichkeitsverhalten veranschaulicht. Sämtliche Produkte konnten zu Filmen verarbeitet werden, wobei Materialien mit DS 1,5-1,7 hohe Zugfestigkeiten (bis zu 42 MPa) und Elastizitätsmodule (bis 1390 MPa) aufwiesen. Insbesondere Stärkehexanoat mit DS <2 sowie Stärkebutanoat mit DS >2 hatten ein mechanisches Eigenschaftsprofil, welches insbesondere in Bezug auf die Festigkeit/Steifigkeit vergleichbar mit Verpackungsmaterialien wie Polyethylen war (Zugfestigkeit: 15-32 MPa, E-Modul: 300-1300 MPa). Zugfestigkeit und Elastizitätsmodul nahmen mit steigender Kettenlänge der veresterten Fettsäure ab. Ester längerkettiger Fettsäuren (C16-C18) waren spröde. Über Weitwinkel-Röntgenstreuung (WAXS) und Infrarotspektroskopie (ATR-FTIR) konnte der Verlauf der Festigkeiten mit einer zunehmenden Distanz der Stärke im Material begründet werden. Es konnten von DS und Kettenlänge abhängige Glasübergänge detektiert werden, die kristallinen Strukturen der langkettigen Fettsäuren zeigten einen Schmelzpeak. Die Hydrophobie der Filme wurde anhand von Kontaktwinkeln >95° gegen Wasser dargestellt. Blends mit biobasierten Polyterpenen sowie den in der Arbeit hergestellten Zein-Acylderivaten ermöglichten eine weitere Verbesserung der Zugfestigkeit bzw. des Elastizitätsmoduls hochsubstituierter Produkte. Eine thermoplastische Verarbeitung mittels Spritzgießen war sowohl für Produkte mit hohem als auch mittlerem DS-Wert ohne jeglichen Zusatz von Weichmachern möglich. Es entstanden homogene, transparente Prüfstäbe. Untersuchungen der Härte ergaben auch hier für Stärkehexanoat und –butanoat mit Polyethylen vergleichbare Werte. Ausgewählte Produkte wurden zu Fasern nach dem Schmelzspinnverfahren verarbeitet. Hierbei wurden insbesondere für hochsubstituierte Derivate homogenen Fasern erstellt, welche im Vergleich zur Gießfolie signifikant höhere Zugfestigkeiten aufwiesen. Stärkeester mit mittlerem DS ließen sich ebenfalls verarbeiten. Zunächst wurden für eine Übertragung des Konzeptes auf die Proteine Zein und WPI verschiedene Synthesemethoden verglichen. Die Veresterung mit Säurechloriden ergab hierbei die höchsten Werte. Im Hinblick auf eine gute Löslichkeit in organischen Lösungsmitteln wurde für WPI die Veresterung mit carbonyldiimidazol (CDI)-aktivierten Fettsäuren in DMSO und für Zein die Veresterung mit Säu-rechloriden in Pyridin bevorzugt. Es stellte sich heraus, dass acyliertes WPI zwar hydrophob, jedoch ohne Weichmacher nicht thermoplastisch verarbeitet werden konnte. Die Erstellung von Gießfolien führte zu Sprödbruchverhalten. Unter Zugabe der biobasierten Ölsäure wurde die Anwendung von acyliertem WPI als thermoplastischer Filler z. B. in Blends mit Stärkeestern dargestellt. Im Gegensatz hierzu zeigte acyliertes Zein Glasübergänge <100 °C bei ausreichender Stabilität (150-200 °C). Zeinoleat konnte ohne Weichmacher zu einer transparenten Gießfolie verarbeitet werden. Sämtliche Derivate erwiesen sich als ausgeprägt hydrophob. Zeinoleat konnte über das Schmelzspinnverfahren zu thermoplastischen Fasern verarbeitet werden. N2 - In recent years, a steadily growing production capacity of bioplastic based on renewable resources was noticed. Despite its huge production capacities and an appropriate property profile (ubiquitous occurrence, easy extraction), starch is only applied in addition of plasticizers in a hydrophilic, thermoplastic form in blends with e. g. polyesters. The same applies to bioplastics based on proteins. The actual study has the aim to develop starch-based bioplastics, which are hydrophobic, thermoplastic without the addition of any plasticizer and have mechanical properties to be a suitable alternative material in the area of food packaging. To obtain a variation of the raw materials for bioplastics, the concept shall be applied to two types of industrial available proteins, whey protein isolate (WPI) and Zein. Fatty acid esters of starch came out to be a suitable class of materials. Initially, the methods of esterifying acid chlorides and the transesterification of fatty acid vinyl esters were compared with the latter being more appropriate. Reaction parameters of this method were optimized and it was applied to a complete series of vinyl ester reagents (butanoate to stearate), leading to degree of substitution (DS)-values up to 2.2-2.6. With that, a systematic study of the variation of the fatty acid ester chain as well as the DS became possible. It came out that all products with a DS >1.5 showed a well-marked solubility in organic solvents, whereby solution NMR-studies as well as measurements of the molecular weight distributions by using size exclusion chroma-tography with multi-angle laser light scattering (SEC-MALLS) were possible. The different solution behavior was studied by dynamic light scattering (DLS). All soluble products could be formed into films via casting, where materials with a DS of 1.5-1.7 showed the highest values concerning tensile strength (up to 42 MPa) and Youngs modulus (up to 1390 MPa). Especially starch hexanoate with DS <2 and starch butanoate with a DS >2 revealed mechanical properties which are comparable to usually applied polymers for food packaging, e. g. polyethylene (tensile strength: 15-20 MPa, E-Mod: 300-1300 MPa). Tensile strength and Youngs modulus were reduced with increasing length of the esterified fatty acid. Wide-angle X-Ray scattering (WAXS) and infrared spectroscopy (ATR-FTIR) explained this tendency by an increasing intermolecular distance of the starch in the material. Glassy transitions of the materials were detected and showed a dependency on the type of esterified fatty acid and the DS. The crystalline structures of the esterified long-chain fatty acids revealed a melting peak. All films came out to be hydrophobic with contact angles against water >95°. The tensile strength and the Youngs modulus of the highly substituted products could be further improved by blending them with biobased polyterpenes as well as the acylated Zein. A thermoplastic processing without the use of any plasticizer additives was possible for products with a medium and high DS. Homogeneous, transparent testing specimens were obtained. The specific mechanical values were comparable with the casted films, although the highest values for the tensile strength and the elongation were lower. Investigations of the hardness showed comparable values to polyethylene. Selected samples were further processed to fibers by melt spinning. Especially starch esters with high DS revealed homogeneous fibers with a significant increase in the tensile strength compared to the film or testing specimen. Even fatty acid starch esters with a medium DS were processed by the melt-spinning, but their higher glassy transition lead to a reduced softening behavior. To transfer this concept to the class of proteins, different methods of synthesis were studied in the first step, which differed in their amount of acylation. The acylation using fatty acid chlorides lead to highest values. With regard to a well-marked organic solvent solubility, in the case of WPI the acylation with carbonyldiimidazol (CDI)-activated fatty acid was established. For Zein, the acid chloride acylation in pyridine gave the desired results. It came out the fatty acid acylated soluble WPI could not be thermoplastic processed without additional plasticizers. By using biobased oleic acid as additive, the potential of acylated WPI as a thermoplastic filler in blends with e. g. fatty acid esters of starch was shown. In contrast, fatty acid acyl derivatives of Zein revealed well marked glassy transitions <100 °C with an adequate thermal stability. While Zeinoleate could be formed into transparent films via solvent casting without any plasticizer additives, low amounts of tall oil enabled film-forming in the case of acyl derivatives with shorter fatty acids as well. All derivatives revealed a well-marked hydrophobicity. Finally, Zeinoleate was thermoplastically processed into fibers by melt-spinning without any further additives. KW - Stärke KW - Proteine KW - thermoplastisch KW - Gießfolien KW - Fasern KW - starch KW - proteins KW - thermoplastic KW - films KW - casted-films KW - fibres Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71089 ER - TY - THES A1 - Heinz, Markus T1 - Synthese von Monomeren auf der Basis nachwachsender Rohstoffe und ihre Polymerisation T1 - Synthesis of Monomers based on Renewable Resources and their Polymerization N2 - Die vorliegende Arbeit thematisiert die Synthese und die Polymerisation von Monomeren auf der Basis nachwachsender Rohstoffe wie zum Beispiel in Gewürzen und ätherischen Ölen enthaltenen kommerziell verfügbaren Phenylpropanoiden (Eugenol, Isoeugenol, Zimtalkohol, Anethol und Estragol) und des Terpenoids Myrtenol sowie ausgehend von der Rinde einer Birke (Betula pendula) und der Korkeiche (Quercus suber). Ausgewählte Phenylpropanoide (Eugenol, Isoeugenol und Zimtalkohol) und das Terpenoid Myrtenol wurden zunächst in den jeweiligen Laurylester überführt und anschließend das olefinische Strukturelement epoxidiert, wobei 4 neue (2-Methoxy-4-(oxiran-2-ylmethyl)phenyldodecanoat, 2-Methoxy-4-(3-methyl-oxiran-2-yl)phenyldodecanoat, (3-Phenyloxiran-2-yl)methyldodecanoat, (7,7-Dimethyl-3-oxatricyclo[4.1.1.02,4]octan-2-yl)methyldodecanoat) und 2 bereits bekannte monofunktionelle Epoxide (2-(4-Methoxybenzyl)oxiran und 2-(4-Methoxyphenyl)-3-methyloxiran) erhalten wurden, die mittels 1H-NMR-, 13C-NMR- und FT-IR-Spektroskopie sowie mit DSC untersucht wurden. Die Photo-DSC Untersuchung der Epoxidmonomere in einer kationischen Photopolymerisation bei 40 °C ergab die maximale Polymerisationsgeschwindigkeit (Rpmax: 0,005 s-1 bis 0,038 s-1) sowie die Zeit (tmax: 13 s bis 26 s) bis zum Erreichen des Rpmax-Wertes und führte zu flüssigen Oligomeren, deren zahlenmittlerer Polymerisationsgrad mit 3 bis 6 mittels GPC bestimmt wurde. Die Umsetzung von 2-Methoxy-4-(oxiran-2-ylmethyl)phenyldodecanoat mit Methacrylsäure ergab ein Isomerengemisch (2-Methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat und 2-Methoxy-4-(2-(methacryl-oyloxy)-3-hydroxypropyl)phenyldodecanoat), das mittels Photo-DSC in einer freien radikalischen Photopolymerisation untersucht wurde (Rpmax: 0,105 s-1 und tmax: 5 s), die zu festen in Chloroform unlöslichen Polymeren führte. Aus Korkpulver und gemahlener Birkenrinde wurden selektiv 2 kristalline ω-Hydroxyfettsäuren (9,10-Epoxy-18-hydroxyoctadecansäure und 22-Hydroxydocosansäure) isoliert. Die kationische Photopolymerisation der 9,10-Epoxy-18-hydroxyoctadecansäure ergab einen nahezu farblosen transparenten und bei Raumtemperatur elastischen Film, welcher ein Anwendungspotential für Oberflächenbeschichtungen hat. Aus der Reaktion von 9,10-Epoxy-18-hydroxyoctadecansäure mit Methacrylsäure wurde ein bei Raumtemperatur flüssiges Gemisch aus zwei Konstitutionsisomeren (9,18-Dihydroxy-10-(methacryloyloxy)octadecansäure und 9-(Methacryloyloxy)-10,18-dihydroxyoctadecansäure) erhalten (Tg: -60 °C). Die radikalische Photopolymerisation dieser Konstitutionsisomere wurde ebenfalls mittels Photo-DSC untersucht (Rpmax: 0,098 s-1 und tmax: 3,8 s). Die Reaktion von 22-Hydroxydocosansäure mit Methacryloylchlorid ergab die kristalline 22-(Methacryloyloxy)docosansäure, welche ebenfalls in einer radikalischen Photopolymerisation mittels Photo-DSC untersucht wurde (Rpmax: 0,023 s-1 und tmax: 9,6 s). Die mittels AIBN in Dimethylsulfoxid initiierte Homopolymerisation der 22-(Methacryloyloxy)docosansäure und der Isomerengemische bestehend aus 2-Methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat und 2-Methoxy-4-(2-(methacryl-oyloxy)-3-hydroxypropyl)phenyldodecanoat sowie aus 9,18-Dihydroxy-10-(methacryloy-loxy)octadecansäure und 9-(Methacryloyloxy)-10,18-dihydroxyoctadecansäure ergab feste lösliche Polymere, die mittels 1H-NMR- und FT-IR-Spektroskopie, GPC (Poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyldodecanoat): Pn = 94) und DSC (Poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyldodecanoat): Tg: 52 °C; Poly(9,18-dihydroxy-10-(methacryloyloxy)-octadecansäure / 9-(methacryloyloxy)-10,18-dihydroxyoctadecansäure): Tg: 10 °C; Poly(22-(methacryloyloxy)docosansäure): Tm: 74,1 °C, wobei der Schmelzpunkt mit dem des Photopolymers (Tm = 76,8 °C) vergleichbar ist) charakterisiert wurden. Das bereits bekannte Monomer 4-(4-Methacryloyloxyphenyl)butan-2-on wurde ausgehend von 4-(4-Hydroxyphenyl)butan-2-on hergestellt, welches aus Birkenrinde gewonnen werden kann, und unter identischen Bedingungen für einen Vergleich mit den neuen Monomeren polymerisiert. Die freie radikalische Polymerisation führte zu Poly(4-(4-methacryloyloxyphenyl)butan-2-on) (Pn: 214 und Tg: 83 °C). Neben der Homopolymerisation wurde eine statistische Copolymerisation des Isomerengemisches 2-Methoxy-4-(2-hydroxy-3-(methacryl-oyloxy)propyl)phenyldodecanoat / 2-Methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)-phenyldodecanoat mit 4-(4-Methacryloyloxyphenyl)butan-2-on untersucht, wobei ein äquimolarer Einsatz der Ausgangsmonomere zu einem Anstieg der Ausbeute, der Molmassenverteilung und der Dispersität des Copolymers (Tg: 44 °C) führte. Die unter Verwendung von Diethylcarbonat als „grünes“ Lösungsmittel mittels AIBN initiierten freien radikalischen Homopolymerisationen von 4-(4-Methacryloyloxyphenyl)butan-2-on und von Laurylmethacrylat ergaben vergleichbare Polymerisationsgrade der Homopolymere (Pn: 150), welche jedoch aufgrund ihrer Strukturunterschiede deutlich unterschiedliche Glasübergangstemperaturen hatten (Poly(4-(4-methacryloyloxyphenyl)butan-2-on): Tg: 70 °C, Poly(laurylmethacrylat) Tg: -49 °C. Eine statistische Copolymerisation äquimolarer Stoffmengen der beiden Monomere in Diethylcarbonat führte bei einer Polymerisationszeit von 60 Minuten zu einem leicht bevorzugten Einbau des 4-(4-Methacryloyloxyphenyl)butan-2-on in das Copolymer (Tg: 17 °C). Copolymerisationsdiagramme für die freien radikalischen Copolymerisationen von 4-(4-Methacryloyloxyphenyl)butan-2-on mit n-Butylmethacrylat beziehungsweise 2-(Dimethylamino)ethylmethacrylat (t: 20 min bis 60 min; Molenbrüche (X) für 4-(4-Methacryloyloxyphenyl)butan-2-on: 0,2; 0,4; 0,6 und 0,8) zeigten ein nahezu ideales azeotropes Copolymerisationsverhalten, obwohl ein leicht bevorzugter Einbau von 4-(4-Methacryloyloxyphenyl)butan-2-on in das jeweilige Copolymer beobachtet wurde. Dabei korreliert ein Anstieg der Ausbeute und der Glasübergangstemperatur der erhaltenen Copolymere mit einem zunehmenden Gehalt an 4-(4-Methacryloyloxyphenyl)butan-2-on im Reaktionsgemisch. Die unter Einsatz der modifizierten Gibbs-DiMarzio-Gleichung berechneten Glasübergangstemperaturen der Copolymere stimmten mit den gemessenen Werten gut überein. Das ist eine gute Ausgangsbasis für die Bestimmung der Glasübergangstemperatur eines Copolymers mit einer beliebigen Zusammensetzung. N2 - The subject of this work is the synthesis and polymerization of monomers based on renewable material e. g. commercially available phenylpropanoides (eugenol, iso-eugenol, cinnamyl alcohol, anethol, and estragol) containing in spices and essential oils, the terpenoid myrtenol, as well as material derived from the bark of a birch (Betula pendula) and cork oak (Quercus suber). Selected phenylpropanoides (eugenol, iso-eugenol and cinnamyl alcohol) and the terpenoid myrtenol were first transferred to the lauryl ester followed by epoxidation of the olefinic structure to yield 4 new (2-methoxy-4-(oxiran-2-ylmethyl)-phenyl dodecanoate, 2-methoxy-4-(3-methyloxiran-2-yl)phenyl dodecanoate, (3-phenyloxiran-2-yl)methyl dodecanoate, (7,7-dimethyl-3-oxatricyclo[4.1.1.02,4]octan-2-yl)methyl dodecanoate) and 2 already known monofunctional epoxides (2-(4-methoxybenzyl)oxirane and 2-(4-methoxy-phenyl)-3-methyloxirane), which were investigated using 1H-NMR-, 13C-NMR- and FT-IR- spectroscopy, and DSC. Photo-DSC investigation of the cationic polymerization of the epoxy monomers at 40 °C revealed the maximum polymerization rate (Rpmax: 0,005 s-1 to 0,038 s-1) and the time (tmax: 13 s to 26 s) to obtain the Rpmax value. Liquid oligomers were obtained with a number average degree of polymerization between 3 and 6, as determined by GPC. The reaction of 2-methoxy-4-(oxiran-2-ylmethyl)phenyl dodecanoate with methacrylic acid resulted in a mixture of isomers (2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)-phenyl dodecanoate and 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyl dodecanoate). Free radical photopolymerization of this isomeric mixture, studied by photo-DSC (Rpmax: 0,105 s-1 and tmax: 5 s), resulted in solid polymers that were insoluble in chloroform. Two crystalline ω-hydroxy fatty acids (9,10-epoxy-18-hydroxyoctadecanoic acid and 22-hydroxydocosanoic acid) were selectively isolated from cork powder and powdered birch bark. The cationic photopolymerization of 9,10-epoxy-18-hydroxyoctadecanoic acid resulted in a nearly colorless transparent film that was elastic at room temperature. Therefore, it has an application potential in the manufacture of coatings. The reaction of 9,10-epoxy-18-hydroxyoctadecanoic acid with methacrylic acid resulted in a mixture of two constitutional isomers (9,18-dihydroxy-10-(methacryloyloxy)octadecanoic acid and 9-(methacryloyloxy)-10,18-dihydroxyoctadecanoic acid), which is liquid at room temperature (Tg: -60 °C). The radical photopolymerization of these constitutional isomers was also studied by photo-DSC (Rpmax: 0,098 s-1 and tmax: 3,8 s). The reaction of 22-hydroxydocosanoic acid with methacryloyl chloride yielded crystalline 22-(methacryloyloxy)docosanoic acid, which was studied by photo-DSC in a radical photopolymerization (Rpmax: 0,023 s-1 and tmax: 9,6 s). The homopolymerization of both 22-(methacryloyloxy)docosanoic acid and the isomeric mixtures consisting of 2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoate and 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyl dodecanoat as well as 9,18-dihydroxy-10-(methacryloyloxy)octadecanoic acid and 9-(methacryloyloxy)-10,18-dihydroxyoctadecanoic acid resulted in solid soluble polymers, which were characterized by 1H-NMR- and FT-IR-spectroscopy, GPC (poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoat / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxy-propyl)phenyl dodecanoate): Pn = 94), and DSC (poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoate / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxy-propyl)phenyl dodecanoate): Tg: 52 °C; poly(9,18-dihydroxy-10-(methacryloyloxy)-octadecanoic acid / 9-(methacryloyloxy)-10,18-dihydroxyoctadecanoic acid): Tg: 10 °C; poly(22-(methacryloyloxy)docosanoic acid): Tm: 74,1 °C, this melting temperature is comparable to that of the photopolymer (Tm = 76,8 °C)). The already known monomer 4-(4-methacryloyloxyphenyl)butane-2-one was synthesized from 4-(4-hydroxyphenyl)butan-2-one obtained from birch bark and polymerized under identical conditions for comparison with the new monomers. The free radical polymerization resulted in poly(4-(4-methacryloyloxyphenyl)butan-2-one) (Pn: 214 and Tg: 83 °C). Besides the homopolymerization, a random copolymerization of the 2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoate / 2-methoxy-4-(2-(methacryloyl-oxy)-3-hydroxypropyl)phenyl dodecanoate isomer mixture with 4-(4-methacryloyloxyphenyl)butan-2-one was also investigated, which resulted in an increase in the yield, molecular weight distribution and dispersity of the copolymer (Tg: 44 °C) at a stoichiometric ratio of the monomers. The application of diethyl carbonate as „green“ solvent in the free radical homopolymerization of both 4-(4-methacryloyloxyphenyl)butan-2-one and lauryl methacrylate initiated with AIBN resulted in a comparable degree of polymerization of the homopolymers obtained (Pn: 150). However, due to the structural differences of the monomer segments, different glass transition temperatures were obtained for poly(4-(4-methacryloyloxyphenyl)butan-2-one) (Tg: 70 °C) and poly(lauryl methacrylate) (Tg: -49 °C). A random copolymerization of a stoichiometric ratio of the monomers in diethyl carbonate resulted in a slightly preferential incorporation of the 4-(4-methacryloyloxyphenyl)butan-2-one in the copolymer (Tg: 17 °C) after a polymerization time of 60 min. Copolymerization diagrams for free radical copolymerizations of 4-(4-methacryloyloxyphenyl)butan-2-one with either n-butyl methacrylate or 2-(dimethylamino)ethyl methacrylate (t: 20 min to 60 min; molar fraction (X) for 4-(4-methacryloyloxyphenyl)butan-2-one: 0,2; 0,4; 0,6 and 0,8) showed an almost ideal azeotropic copolymerization behavior, although a slightly preferential incorporation of the 4-(4-methacryloyloxyphenyl)butan-2-one was observed in the copolymers. An increase in both yield and glass transition temperature of the copolymers obtained correlated with an increasing content on 4-(4-methacryloyloxyphenyl)butan-2-one in the reaction mixture. Good agreement was found between the glass transition temperatures calculated using the modified Gibbs-DiMarzio equation and the measured values for the copolymers. This is a good basis for determining the glass transition temperature of a copolymer of any composition. KW - photoinitiierte kationische Polymerisation KW - Epoxide KW - epoxidierte Phenylpropanoide KW - epoxidierte Terpene KW - Copolymerisationsdiagramme KW - freie radikalische Polymerisation KW - Glasübergangstemperaturen KW - Methacrylate KW - Molmassen KW - statistische Copolymere KW - 9,10-Epoxy-18-hydroxyoctadecansäure KW - biobasierte Methacrylate KW - biobasierte Monomere KW - nachwachsende Rohstoffe KW - 22-Hydroxydocosansäure KW - photoinitiierte Polymerisation KW - Polymerisation KW - Betula pendula KW - Quercus suber KW - Birke KW - Korkeiche KW - Biomasse KW - Birkenrinde KW - grüne Chemie KW - Polymere KW - photoinitiierte freie radikalische Polymerisation KW - 22-hydroxydocosanoic acid KW - 9,10-epoxy-18-hydroxyoctadecanoic acid KW - Betula pendula KW - biomass KW - birch KW - birch bark KW - copolymerization diagrams KW - Epoxides KW - Glass transition temperatures KW - Cork oak KW - Methacrylates KW - Molar masses KW - polymers KW - polymerization KW - Quercus suber KW - bio-based methacrylates KW - bio-based monomers KW - epoxidized phenylpropanoids KW - epoxidized terpenes KW - free radical polymerization KW - green chemistry KW - renewable raw materials KW - photoinitiated polymerization KW - photoinitiated free radical KW - photoinitiated cationic polymerization KW - random copolymers KW - photopolymerization KW - Baumrinde KW - Rinde KW - tree bark KW - bark KW - Photopolymerisation Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-637943 ER - TY - THES A1 - Milke, Bettina T1 - Synthese von Metallnitrid- und Metalloxinitridnanopartikeln für energierelevante Anwendungen T1 - Synthesis of metal nitride and metal oxynitride nanoparticles for energy related applications N2 - Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie führt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter für Nanomaterialien. Allerdings führen bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kostengünstige und sichere Synthese würde die Möglichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Flüssigphasensynthese eingesetzt. Beide Synthesewege führen zu definierten Partikelgrößen und interessanten Morphologien und ermöglichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route führt diese zu Nanopartikeln mit Kern-Hülle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberflächen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazitäten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) übersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gewünschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und führt so zu gelben Zr2ON2-Nanopartikeln mit einer Größe d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln führt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel lässt neue Morphologien in Form von Nanostäbchen entstehen, die zu schuppenartigen sphärischen Überstrukturen agglomeriert sind. N2 - The development of new methods toward alternative clean energy production and efficient energy storage is a hot topic nowadays. In this context nanoscience has an important role to find suitable ways of increasing the efficiency of storage and production of energy of already known materials and new materials. However, until now the most well-known syntheses of MnN0,43 and Zr2ON2 nanoparticles lead to undefined particles. A simple, cheap and safe synthesis would offer the possibility of broader applications and scalability. We herein present the so-called urea-glass route which is used as a sol-gel process. This synthetic route leads to well-defined particle sizes, novel particle morphologies and allows the tailoring of the desired products. In the case of the synthesis of manganese nitride nanoparticles (MnN0,43), nanoparticles with a core-shell structure are obtained, their use as conversion materials in batteries is first introduced. On the other hand, the formation of zirconium oxynitride nanoparticles (Zr2ON2) can be easily influenced by varying the reaction conditions such as the amount of urea or the reaction temperature. The addition of small amounts of salt prevents the formation of carbon in the final product, leading to yellow Zr2ON2 nanoparticles with a size of d = 8 nm which show semiconductor behavior. KW - Nitride KW - Oxinitride KW - Nano KW - Li-Batterien KW - Harnstoff-Glas-Route KW - Nitrides KW - Oxynitrides KW - Nano KW - Li-batteries KW - Urea-Glas-Route Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60008 ER - TY - THES A1 - Schaal, Janina T1 - Synthese und Photochemie von photoaktivierbaren Biomolekülen T1 - Synthesis and photochemistry of photoactivate biomolecules N2 - Mechanistische und kinetische Untersuchungen von komplexen zellulären Prozessen in situ sind in den vergangenen Jahren durch den Einsatz photoaktivierbarer Biomoleküle, sogenannter caged Verbindungen, möglich geworden. Bei den caged Verbindungen handelt es sich um photolabile inaktive Derivate von biologisch aktiven Molekülen, aus denen durch ultraviolettes Licht mit Hilfe einer photochemischen Reaktion die natürliche, biologisch aktive Substanz schnell freigesetzt werden kann. Im Rahmen der vorliegenden Arbeit wurden caged Verbindungen von den Neurotransmittern Octopamin und Dopamin, dem Octopamin-Antagonist Epinastin, den Proteinsyntheseinhibitoren Emetin und Anisomycin, dem Protonophor CCCP und dem Riechstoff Bourgeonal hergestellt. Zur Synthese dieser caged Verbindungen wurden sowohl bekannte als auch verschiedene im Rahmen dieser Arbeit neu entwickelte photolabile Schutzgruppen mit einem (Cumarin-4-yl)methyl- bzw. einem 2-Nitrobenzyl-Gerüst eingesetzt. Entsprechende Syntheseverfahren wurden erarbeitet. Anschließend erfolgte eine umfassende physikalisch-chemische sowie photochemische Charakterisierung der erhaltenen caged Verbindungen. Dabei wurde besonders auf gute Löslichkeit in Wasser bei physiologischer Ionenstärke, schnelle und effiziente Photoreaktivität, hohe Extinktion bei Wellenlängen von 350-430 nm und gute solvolytische Stabilität bei geringer Toxizität der freigesetzten Schutzgruppe geachtet. Ein Schwerpunkt bei der photochemischen Charakterisierung bildeten die Untersuchungen zur Quantifizierung der 2-Photonen-Anregung, uncaging action cross-sections, der Cumarinylmethyl-caged Verbindungen, aufgrund ihrer Bedeutung für die Photofreisetzung von Biomolekülen, da die gleichzeitige Absorption von 2 IR-Photonen eine höhere dreidimensionale Auflösung und eine wesentlich tiefere Gewebepenetration erlaubt. Mit Hilfe von Kooperationspartnern wurden zeitaufgelösten Fluoreszenz- und IR-Messungen an verschiedenen (Cumarin-4-yl)methoxycarbonyl-caged Modellverbindungen durchgeführt, mit denen die Geschwindigkeitskonstanten k1 und kdecarb des Photolysemechanismus ermittelt wurde. Am Ende folgten die Anwendungserprobungen ausgewählter caged Verbindungen in einem Translationsassay bzw. in Zelluntersuchungen. N2 - In the last years mechanistic and kinetic in situ studies of complex cellular processes become possible by employing photoactivate Biomolecules, also called caged compounds, as a tool for these studies. Caged compounds are photolabile inactive derivates of biologic active molecules which are fast laid off the nature biologic active molecule by a photochemical reaction which was triggered by UV-light. In the present dissertation caged compounds of the neurotransmitters octopamine and dopamine, of the octopamine antagonist epinastine, of the proteine synthesis inhibitors emetine and anisomycine, of the ionophore CCCP and of the odorus substance Bourgeonal are synthesized. As precursors for the synthesis of that caged compounds some reported and several in these work newly developed photolabile protecting groups with (coumarin-4-yl)methyl- or 2-nitrobenzyl-scaffold were used. Corresponding Synthesis were designed. Afterwards the received caged compounds were global physical-chemical and photochemical characterised. In favour it was specifically valued for highly water solubility at pH 7,2, fast and efficient photo reactivity, high extinctions at wavelength 350-430 nm, well solvolytic stability and less toxicity of the redundant protecting groups. One key aspect of photochemical characterisation were the studies of uncaging action cross-sections of the coumarinylmethyl-caged molecules, because of their relevance for the photorelease of biomolecules in tissues. The simultaneous absorption of 2 IR-photons allowed highly three-dimensional release and a essentially deeper penetration in tissues. With the aid of co-operation partners were time-released fluorescence- and IR- measurements with several (coumarin-4-yl)methoxycarbonyl-caged molecules realised and therefore the rate constant k1 und kdecarb of the photolyse mechanismus were determined. At the end of the dissertation the achieved caged compounds were testet in translation assays and several cell cultures. KW - organische Chemie KW - caged Verbindungen KW - Cumarin KW - Nitrobenzyl KW - Neurotransmitter KW - organic chemistry KW - caged compounds KW - coumarine KW - nitrobenzyl KW - neurotransmitter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57929 ER - TY - THES A1 - Hentschel, Jens T1 - Synthese und kontrollierte Mikrostrukturbildung funktionaler Peptid-Polymerkonjugate in organischen Lösungsmitteln T1 - Synthesis and controlled microstructure formation of functional peptide-polymer conjugates in organic media N2 - In der vorliegenden Arbeit wurde ein Ansatz verfolgt, die besonderen Eigenschaften der Strukturbildung sequenzdefinierter Peptide mit den vielseitigen Materialeigenschaften synthetischer Blockcopolymere zu kombinieren. Dazu wurde ein synthetisches Polymer kovalent mit einer definierten Peptidsequenz verknüpft. Der Peptidblock (die Organisationseinheit) wurde speziell designt, um später die Strukturbildung des Peptid-Polymerkonjugates induzieren und leiten zu können. Als Organisationsmotiv diente hierbei das aus der Natur bekannte β-Faltblatt Strukturmotiv. Das Peptidsegment wurde in einer festphasengebundenen Synthese aufgebaut. Dabei wurden temporäre Stör-Segmente (Switch-Segmente) in die Peptidsequenz integriert. Diese Segmente unterdrücken die Aggregationstendenz während der Synthese und können durch einen pH-abhängigen Schaltvorgang in das natürliche Peptidrückgrat überführt werden. Zusätzlich zu der verbesserten Ausbeute und Reinheit der entsprechenden Peptide war auf diese Weise eine kontrollierte Aktivierung der Mikrostrukturbildung möglich. Mit Hilfe zwei verschiedener Synthesestrategien (Kupplungs- bzw. Polymerisationsstrategie) wurde ein Satz von definierten Peptid-Polymerkonjugaten mit unterschiedlich großen Polymersegmenten synthetisiert. Diese wurden anschließend im Hinblick auf ihre Strukturbildungseigenschaften in organischen Lösungsmitteln untersucht. Durch mikroskopische Verfahren (AFM, TEM), konnte für alle Konjugate, die Bildung faserartiger Aggregate mit Dimensionen im Nano- bis Mikrometerbereich beobachtet werden. Genauere Untersuchungen zeigten, dass die Peptidsegmente in diesen Faserstrukturen ein β-Faltblatt ausbilden. Dies ist ein deutlicher Hinweis darauf, dass die Strukturbildung der Konjugate tatsächlich durch den Peptidblock gesteuert und kontrolliert wurde. N2 - The aim of this work was to combine the particular structuring properties of sequence-defined peptides with the versatile material properties of synthetic block-copolymers. Therefor, synthetic polymers were linked covalently to a defined oligopeptide-sequence using varying synthetic approaches. The oligopeptide was designed to guide and control the microstructure formation of the peptide-polymer conjugate. For this reason a peptide sequence with a high propensity to adopt the β-sheet motif was chosen. Thus, highly attractive, anisometric tape, fibrillar or fibre-like nanostructures can be accessed. However, such peptide-sequences are very difficult to synthesize and handle, as a result of their strong aggregation tendency. Therefore, temporary structure breaking units, so called switch-segments, were integrated into the peptide sequence, disturbing the peptide backbone and thus, temporarily suppressing the peptide properties. The controlled rearrangement of these defects reestablishes the native peptide backbone, switching the aggregation tendency of the peptide segment on, and triggers the assembly process. A set of defined peptide-polymer conjugates with different polymer block-lengths was synthesized either by an coupling approach or by RAFT polymerization using a switch-peptide macro chain transfer agent. Afterwards, the structure formation properties of these conjugates were investigated. By the use of microscopic techniques (AFM, TEM), the formation of densely twisted tape-like microstructures was observed for all conjugates. The formation of extended β-sheets was confirmed by different techniques (FT-IR, TEM-SAED), indicating a peptide guided microstructure formation process. Thus, it could be demonstrated that the peptide guided organization of synthetic polymers can be successfully transferred into organic solvents. KW - Peptid KW - Polymer KW - Strukturbildung KW - RAFT KW - peptide KW - polymer KW - switch KW - RAFT KW - nanostructure Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19840 ER - TY - THES A1 - Peikow, Dirk T1 - Synthese und Glycosidasehemmung von Thio-analogen Kohlenhydraten T1 - Synthesis and glycosidase inhibition of thio-analogues carbohydrates N2 - Chitin ist ein Polysaccharid, welches aus N-Acetylglucosamin (GlcNAc) aufgebaut ist. Das Biopolymer kommt in der Natur in Invertebraten, Algen, Pilzen und Einzellern vor. Chitinasen hydrolysieren Chitin. Diese Enzyme sind essentiell für die Regulierung und Entwicklung von Arthropoden und Mikroorganismen. Sie fungieren in Pflanzen als Phytoalexine. Das verstärkt das Interesse am Design neuer natürlicher und synthetischer Chitinase-inhibitoren, die als potentielle Insektizide, Fungizide, Antimalaria bzw. Antiasthmatika eingesetzt werden können. Ziel dieser Arbeit war die Synthese von neuen Thioglycosidanaloga von N-Acetyl-chitooligosacchariden und deren Untersuchung als Enzyminhibitoren. Die geschützten 4-O-Tf-galactopyranosylthioglycoside wurden aus den korrespondierenden p-Methoxyphenylglycosiden von GlcNAc nach einer neuen Methode in einer Stufe hergestellt. Die Reaktion der galacto-Triflate mit 2-Acetamido-3,4,6-tri-O-acetyl-2-desoxy-1-thio-ß-D-glucopyranose in Gegenwart von Natriumhydrid und 15-Krone-5 in THF lieferte die Pseudo-Trisaccharide. Die Herstellung der Glycosyl-Thiazoline aus den entsprechenden p-Methoxyphenyl-glycosiden mit Lawesson's Reagenz ist nach einem neuen Reaktionsweg beschrieben wie auch die Synthese der Thioacetamide von GlcNAc-Oligomeren. Die Pseudo-Oligosaccharide wurden als Inhibitoren der Chitinasen von Serratia marcescens, Chironomus tentans, Acanthocheilonema viteae und Hevaea brasiliensis sowie der N-Acetyl-glucosaminidase von Chironomus tentans getestet. In einigen Fällen ergab sich eine Hemmung (IC50) im µM-Bereich. N2 - Chitin is a polysaccharide composed of N-acetylglucosamine (GlcNAc). The biopolymer is distributed in Invertebrates, algae, fungi and Protozoa. Chitinases hydrolyse chitin. These enzymes are essential for the regulation and development of Arthropoda and micro organisms. In bacteria chitinase degrade chitin as source of carbon and act in plants as phytoalexins. Currently, there is a great interest in the design of novel natural and synthetic chitinase inhibitors, which may act as potential insecticides, fungicides, antimalaria or antiasthmatics. Thio-oligosaccharides and related thio-glycosides are rarely described in the literature. Thio-analogues of oligosaccharides derived from N-acetylglucosamine are of interest as potential enzyme inhibitors. The synthesis and enzymatic investigations of thio-glycoside analogues of N-acetyl-chitooligosaccharides are described in this thesis. The protected 4-O-Tf-galactopyranosyl thioglycosides were prepared by a new method in one step from the corresponding p-methoxyphenyl glycosides of N-acetylglucosamine. Coupling of galacto-triflates with 2-acetamido-3,4,6-tri-O-acetyl-2-deoxy-1-thio-ß-D-glucopyranose in the presence of sodium hydride and 15-crown-5 in THF, followed by deprotection, afforded the pseudo-trisaccharides. The preparation of glycosyl thiazolines by a new manner from the analogues p-methoxyphenyl glycosides with Lawesson's reagent is also described however the synthesis of thioacetamides of N-acetylglucosamine. The pseudo-oligosaccharides were tested for inhibition of chitinases from Serratia marcescens, Chironomus tentans, Acanthocheilonema viteae, and Hevaea brasiliensis, and also with N-acetyl-glucosaminidase from Chironomus tentans. Inhibition with IC50 values in the µM range was found in a few cases. KW - Chitin KW - Chitinasen KW - N-Acetyl-chitooligosaccharide KW - Thioglycoside KW - potentielle Chitinaseinhibitoren KW - chitin KW - chitinase KW - N-acetyl-chitooligosaccharides KW - thio-glycosides KW - potential chitinase inhibitors Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-11192 ER - TY - THES A1 - Bagdahn, Christian T1 - Synthese und Charakterisierung von Polymerionogelen basierend auf ionischen Flüssigkeiten und Polymethylmethacrylat N2 - Zentrales Element dieser Arbeit ist die Synthese und Charakterisierung praktisch nutzbarer Ionogele. Die Basis der Polymerionogele bildet das Modellpolymer Polymethylmethacrylat. Als Additive kommen ionische Flüssigkeiten zum Einsatz, deren Grundlage Derivate des vielfach verwendeten Imidazoliumkations sind. Die Eigenschaften der eingebetteten ionischen Flüssigkeiten sind für die Ionogele funktionsgebend. Die Funktionalität der jeweiligen Gele und damit der Transfer der Eigenschaften von ionischen Flüssigkeiten auf die Ionogele wurde in der vorliegenden Arbeit mittels zahlreicher Charakterisierungstechniken überprüft und bestätigt. In dieser Arbeit wurden durch Ionogelbildung makroskopische Ionogelobjekte in Form von Folien und Vliesen erzeugt. Dabei kamen das Filmgießen und das Elektrospinnen als Methoden zur Erzeugung dieser Folien und Vliese zum Einsatz, woraus jeweils ein Modellsystem resultiert. Dadurch wird die vorliegende Arbeit in die Themenkomplexe „elektrisch halbleitende Ionogelfolien“ und „antimikrobiell aktive Ionogelvliese“ gegliedert. Der Einsatz von triiodidhaltigen ionischen Flüssigkeiten und einer Polymermatrix in einem diskontinuierlichen Gießprozess resultiert in elektrisch halbleitenden Ionogelfolien. Die flexiblen und transparenten Folien können Mittelpunkt zahlreicher neuer Anwendungsfelder im Bereich flexibler Elektronik sein. Das Elektrospinnen von Polymethylmethacrylat mit einer ionischen Flüssigkeit führte zu einem homogen Ionogelvlies, welches ein Modell für die Übertragung antimikrobiell aktiver Eigenschaften ionischer Flüssigkeiten auf poröse Strukturen zur Filtration darstellt. Gleichzeitig ist es das erste Beispiel für ein kupferchloridhaltiges Ionogel. Ionogele sind attraktive Materialien mit zahlreichen Anwendungsmöglichkeiten. Mit der vorliegenden Arbeit wird das Spektrum der Ionogele um ein elektrisch halbleitendes und ein antimikrobiell aktives Ionogel erweitert. Gleichzeitig wurden durch diese Arbeit der Gruppe der ionischen Flüssigkeiten drei Beispiele für elektrisch halbleitende ionische Flüssigkeiten sowie zahlreiche kupfer(II)chloridbasierte ionische Flüssigkeiten hinzugefügt. KW - Ionogel KW - Polymerionogel KW - ionische Flüssigkeit KW - Polymethylmethacrylat KW - ionogel KW - polymer ionogel KW - ionic liquid KW - Poly(methyl methacrylate Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-532874 ER - TY - THES A1 - Thesen, Manuel Wolfram T1 - Synthese und Charakterisierung von phosphoreszenten Terpolymeren und nichtkonjugierten Matrixpolymeren für effiziente polymere Leuchtdioden T1 - Synthesis and characterization of phosphoreszent terpolymers and nonconjugated matrixpolymers for efficient polymer light emitting diodes N2 - Mit Seitenkettenpolystyrenen wurde ein neues Synthesekonzept für phosphoreszente polymere LED-Materialien aufgestellt und experimentell verifiziert. Zunächst erfolgten auf Grundlage strukturell einfacher Verbindungen Untersuchungen zum Einfluss von Spacern zwischen aktiven Seitengruppen und dem Polystyrenrückgrat. Es wurden Synthesemethoden für die Monomere etabliert, durch die aktive Elemente - Elektronen- und Lochleiter - mit und ohne diesen Spacer zugänglich sind. Durch Kombination dieser Monomere waren unter Hinzunahme von polymerisierbaren Iridium-Komplexen in unterschiedlicher Emissionswellenlänge statistische Terpolymere darstellbar. Es wurde gezeigt, dass die Realisierung bestimmter Verhältnisse zwischen Loch-, Elektronenleiter und Triplettemitter in ausreichender Molmasse möglich ist. Die Glasstufen der Polymere zeigten eine deutliche Strukturabhängigkeit. Auf die Lage der Grenzorbitale übten die Spacer nahezu keinen Einfluss aus. Die unterschiedlichen Makromoleküle kamen in polymeren Licht emittierenden Dioden (PLEDs) zum Einsatz, wobei ein deutlicher Einfluss der Spacereinheiten auf die Leistungscharakteristik der PLEDs festzustellen war: Sowohl Effizienz, Leuchtdichte wie auch Stromdichte waren durch den Einsatz der kompakten Makromoleküle ohne Spacer deutlich höher. Diese Beobachtungen begründeten sich hauptsächlich in der Verwendung der aliphatischen Spacer, die den Anteil im Polymer erhöhten, der keine Konjugation und damit elektrisch isolierende Eigenschaften besaß. Diese Schlussfolgerungen waren mit allen drei realisierten Emissionsfarben grün, rot und blau verifizierbar. Die besten Messergebnisse erzielte eine PLED aus einem grün emittierenden und spacerlosen Terpolymer mit einer Stromeffizienz von etwa 28 cd A-1 (bei 6 V) und einer Leuchtdichte von 3200 cd m-2 (bei 8 V). Ausgehend von obigen Ergebnissen konnten neue Matrixmaterialien aus dem Bereich verdampfbarer Moleküle geringer Molmasse in das Polystyrenseitenkettenkonzept integriert werden. Es wurden Strukturvariationen sowohl von loch- wie auch von elektronenleitenden Verbindungen als Homopolymere dargestellt und als molekular dotierte Systeme in PLEDs untersucht. Sieben verschiedene lochleitende Polymere mit Triarylamin-Grundkörper und drei elektronendefizitäre Polymere auf der Basis von Phenylbenzimidazol konnten erfolgreich in den Polymeransatz integriert werden. Spektroskopische und elektrochemische Untersuchungen zeigten kaum eine Veränderung der Charakteristika zwischen verdampfbaren Molekülen und den dargestellten Makromolekülen. Diese ladungstransportierenden Makro-moleküle wurden als polymere Matrizes molekular dotiert und lösungsbasiert zu Einschicht-PLEDs verarbeitet. Als aussichtsreichstes Lochleiterpolymer dieser Reihe, mit einer Strom-effizenz von etwa 33 cd A-1 (bei 8 V) und einer Leuchtdichte von 6700 cd m-2 (bei 10 V), stellte sich ein Triarylaminderivat mit Carbazolsubstituenten heraus. Als geeignetstes Matrixmaterial für die Elektronenleitung wurde ein meta-verknüpftes Di-Phenylbenzimidazol ausfindig gemacht, das in der PLED eine Stromeffizienz von etwa 20 cd A-1 (bei 8 V) und eine Leuchtdichte von 7100 cd m-2 (bei 10 V) erzielte. Anschließend wurden die geeignetsten Monomere zu Copolymeren kombiniert: Die lochleitende Einheit bildete ein carbazolylsubstituiertes Triarylamin und die elektronen-leitende Einheit war ein disubstituiertes Phenylbenzimidazol. Dieses Copolymer diente im Folgenden dazu, PLEDs zu realisieren und die Leistungsdaten mit denen eines Homopolymer-blends zu vergleichen, wobei der Blend die bessere Leistungscharakteristik zeigte. Mit dem Homopolymerblend waren Bauteileffizienzen von annähernd 30 cd A-1 (bei 10 V) und Leuchtdichten von 6800 cd m-2 neben einer Verringerung der Einsatzspannung realisierbar. Für die abschließende Darstellung bipolarer Blockcopolymere wurde auf die Nitroxid-vermittelte Polymerisation zurückgegriffen. Mit dieser Technik waren kontrollierte radikalische Polymersiationen mit ausgewählten Monomeren in unterschiedlichen Block-längen durchführbar. Diese Blockcopolymere kamen als molekular dotierte Matrizes in phosphoreszenten grün emittierenden PLEDs zum Einsatz. Die Bauteile wurden sowohl mit statistischen Copolymeren, wie auch mit Homopolymerblends in gleicher Zusammensetzung aber unterschiedlichem Polymerisationsgrad hinsichtlich der Leistungscharakteristik verglichen. Kernaussage dieser Untersuchungen ist, dass hochmolekulare Systeme eine bessere Leistungscharakteristik aufweisen als niedermolekulare Matrizes. Über Rasterkraft-mikroskopie konnte eine Phasenseparation in einem Größenbereich von etwa 10 nm für den hochmolekularen Homopolymerblend nachgewiesen werden. Für die Blockcopolymere war es nicht möglich eine Phasenseparation zu beobachten, was vorwiegend auf deren zu geringe Blocklänge zurückgeführt wurde. N2 - A new synthetic approach for the synthesis of side chain polystyrenes was established and their use as phosphorescent polymers for polymer light emitting diodes (PLEDs) is shown by experiments. An assay was introduced to clarify influences on electroluminescent behavior for RGB-colored phosphorescent terpolymers with N,N-Di-p-tolyl-aniline as hole-transporting unit, 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (tert-BuPBD) as electron-transporting unit, and different iridium complexes in RGB-colors as triplet emitting materials. All monomers were attached with spacer moieties to the “para” position of a polystyrene. PLEDs were built to study the electro-optical behavior of these materials. The gist was a remarkable influence of hexyl-spacer units to the PLED performance. For all three colors only very restricted PLED performances were found. In comparison RGB-terpolymers were synthesized with directly attached charge transport materials to the polymer backbone. For this directly linked systems efficiencies were 28 cd A−1 @ 6 V (green), 4.9 cd A−1 @ 5 V (red) and 4.3 cd A−1 @ 6 V (bluish). In summary it is assumed that an improved charge percolation pathways regarding to the higher content of semiconducting molecules and an improved charge transfer to the phosphorescent dopand in the case of the copolymers without spacers are responsible for the better device performance comparing the copolymers with hexyl spacers. It was found that the approach of the directly connected charge transport materials at the nonconjugated styrene polymer backbone is favored for further investigations as shown in the following. A series of styrene derived monomers with triphenylamine-based units, and their polymers have been synthesized and compared with the well-known structure of polymer of N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine with respect to their hole-transporting behavior in PLEDs. A vinyltriphenylamine structure was selected as a basic unit, functionalized at the para positions with the following side groups: diphenylamine, 3-methylphenyl-aniline, 1- and 2-naphthylamine, carbazole, and phenothiazine. The polymers are used in PLEDs as host polymers for blend systems. It is demonstrated that two polymers are excellent hole-transporting matrix materials for these blend systems because of their good overall electroluminescent performances and their comparatively high glass transition temperatures. For the carbazole-substituted polymer (Tg = 246 °C), a luminous efficiency of 35 cd A−1 and a brightness of 6700 cd m−2 at 10 V is accessible. The phenothiazine-functionalized polymer (Tg = 220 °C) shows nearly the same outstanding PLED behavior. Hence, both these polymers outperform the well-known polymer of N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine, showing only a luminous efficiency of 7.9 cd A−1 and a brightness of 2500 cd m−2 (10 V). Furthermore, novel styrene functionalized monomers with phenylbenzo[d]imidazole units and the corresponding homopolymers are prepared. The macromolecules are used as matrices for phosphorescent dopants to prepare PLEDs. The devices exhibit current efficiencies up to 38.5 cd A−1 at 100 cd m−2 and maximum luminances of 7400 cd m−2 at 10 V. Afterwards the most efficient monomers of this investigations were combined and statistical copolymers were synthesized. As hole-transporting monomer the carbazole substituted triarylamine and as electron-transporting monomer a disubstituted phenylbenzoimidazole was selected. This statistical copolymer was used in the following as matrix material for phosporescent PLEDs and the device performance was compared with a matrix system of a polymer blend matrix system of corresponding homopolymers. With this homopolymer blend efficiencies of about 30 cd A-1 at 10 V and luminances of 6800 cd m-2 beside a decreased onset voltage were realized. Finally bipolar blockcopolymers of structural basic monomers were synthesized via nitroxide mediated polymerization. With these technique and the chosen hole- and electron-transporting monomers a controlled radical polymerization was realized leading to blockcopolymers in different block lengths. These blockcopolymers were used as molecular doped matrix systems in green phosphoreszent PLEDs. The devices were compared in regard to their performances with PLEDs made of statistical copolymers and homopolymer blends. It was found that high molecular systems show a better device performance compared to low molecular polymer matrices. With atomic force microscopy it is shown that a phase separation takes place for the high molecular blend of homopolymers. For the synthesized blockcopolymers no phase separation could be verified, mainly because of the comparatively low molecular weight of these systems. KW - phosphoreszente Terpolymere KW - Elektrolumineszenz KW - organische Licht emittierende Diode KW - Ladungstransport KW - bipolare Blockcopolymere KW - phosphorescent Terpolymers KW - electroluminsecence KW - organic light emitting diode KW - charge transport KW - bipolar blockcopolymers Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51709 ER - TY - THES A1 - Riemer, Janine T1 - Synthese und Charakterisierung selektiver Fluoroionophore für intra- und extrazelluläre Bestimmungen von Kalium- und Natrium-Ionen T1 - Synthesis and characterization of selective fluoroionophores for intra- and extracellular determinations of potassium and sodium ions N2 - Im Rahmen dieser Dissertation konnten neue Kalium- und Natrium-Ionen Fluoreszenzfarbstoffe von der Klasse der Fluoroionophore synthetisiert und charakterisiert werden. Sie bestehen aus einem N Phenylazakronenether als Ionophor und unterschiedlichen Fluorophoren und sind über einen π-konjugierten 1,2,3-Triazol-1,4-diyl Spacer verbunden. Dabei lag der Fokus während ihrer Entwicklung darauf, diese in ihrer Sensitivität, Selektivität und in ihren photophysikalischen Eigenschaften so zu funktionalisieren, dass sie für intra- bzw. extrazelluläre Konzentrationsbestimmungen geeignet sind. Durch Variation der in ortho Position der N-Phenylazakronenether befindlichen Alkoxy-Gruppen und der fluorophoren Gruppe der Fluoroionophore konnte festgestellt werden, dass die Sensitivität und Selektivität für Kalium- bzw. Natrium-Ionen jeweils durch eine bestimmte Isomerie der 1,2,3-Triazol-1,4-diyl-Einheit erhöht wird. Des Weiteren wurde gezeigt, dass durch eine erhöhte Einschränkung der N,N-Diethylamino-Gruppe des Fluorophors eine Steigerung der Fluoreszenzquantenausbeute und eine Verschiebung des Emissionsmaximums auf über 500 nm erreicht werden konnte. Die Einführung einer Isopropoxy-Gruppe an einem N-Phenylaza-[18]krone-6-ethers resultierte dabei in einem hoch selektiven Kalium-Ionen Fluoroionophor und ermöglichte eine in vitro Überwachung von 10 – 80 mM Kalium-Ionen. Die Substitution einer Methoxy-Gruppe an einem N-Phenylaza-[15]krone-5-ether kombiniert mit unterschiedlich N,N-Diethylamino-Coumarinen lieferte hingegen zwei Natrium-Ionen Fluoroionophore, die für die Überwachung von intra- bzw. extrazellulären Natrium-Ionen Konzentrationen geeignet sind. In einem weiteren Schritt wurden N-Phenylaza-[18]krone-6-ether mit einem Fluorophor, basierend auf einem [1,3]-Dioxolo[4,5-f][1,3]benzodioxol-(DBD)-Grundgerüst, funktionalisiert. Die im Anschluss durchgeführten spektroskopischen Untersuchungen ergaben, dass die Isopropoxy-Gruppe in ortho Position des N-Phenylaza-[18]krone-6-ether in einen für extrazelluläre Kalium-Ionen Konzentrationen selektiven Fluoroionophor resultierte, der die Konzentrationsbestimmungen über die Fluoreszenzintensität und -lebensdauer ermöglicht. In einem abschließenden Schritt konnte unter Verwendung eines Pyrens als fluorophore Gruppe ein weiterer für extrazelluläre Kalium-Ionen Konzentrationen geeigneter Fluoroionophor entwickelt werden. Die Bestimmung der Kalium-Ionen Konzentration erfolgte hierbei anhand der Fluoreszenzintensitätsverhältnisse bei zwei Emissionswellenlängen. Insgesamt konnten 17 verschiedene neue Fluoroionophore für die Bestimmung von Kalium- bzw. Natrium-Ionen synthetisiert und charakterisiert werden. Sechs dieser neuen Moleküle ermöglichen in vitro Messungen der intra- oder extrazellulären Kalium- und Natrium-Ionen Konzentrationen und könnten zukünftig für in vivo Konzentrationsmessungen verwendet werden. N2 - In this thesis, new potassium and sodium ion fluorescent probes from the class of fluoroionophores were synthesized and characterized. They consist of an N-phenylazacrown lariat ether and several fluorophores, connected through a π-conjugated 1,2,3-triazole-1,4-diyl spacer. The focus of their development was to optimize their sensitivity, selectivity and their photophysical properties, making them suitable for detecting intra- or extracellular ion levels. Variation of the alkoxy groups in the ortho position of the N-phenylazacrown lariat ether and the fluorophoric group of the fluoroionophores showed that the sensitivity and selectivity for potassium or sodium ions was preferred by a specific isomerism of the 1,2,3-triazole-1,4-diyl unit. Furthermore it was possible to show that an increased hindrance of the N,N-diethylamino group of the fluorophore led to a higher fluorescence quantum yield and a shift of the emission maximum to over 500 nm. The introduction of an isopropoxy group to an N phenylaza-[18]crown-6 lariat ether resulted in a highly selective potassium ion fluoroionophore suitable for in vitro monitoring of potassium ion levels (10 – 80 mM). However, a substitution of a methoxy group on an N-phenylaza-[15] crown-5 lariat ether combined with different degrees of hindrance of N,N diethylamino coumarins gave sodium ion fluoroionophores which are suitable for monitoring intracellular and extracellular sodium ion levels. In a following step N-phenylaza-[18]crown-6 lariat ethers were functionalized with a fluorophore, which was based on a [1,3]-dioxolo[4,5-f [1,3]benzodioxole (DBD) backbone. Following spectroscopic studies it was shown that an isopropoxy group in the ortho position of the N-phenylaza-[18]crown-6 lariat ether resulted in a selective fluoroionophore for extracellular potassium ion levels, which allows measurements of the fluorescence intensity and -lifetime. In a final step an additional fluoroionophore, suitable for extracellular potassium ion levels, was developed by using a pyrene as the fluorophoric group. This fluoroionophore was used to measure potassium ion levels by analyzing the fluorescence intensity ratios at two emission wavelengths. In this work 17 new fluoroionophores were synthesized and characterized. Six of these novel molecules allow in vitro measurements of intra- or extracellular potassium and sodium ion levels and could be used for in vivo concentration measurements in the future. KW - Fluoroionophore KW - fluoroionophore KW - intra- und extrazellulär KW - intra- and extracellular KW - Kalium- und Natrium-Ionen KW - potassium and sodium ions Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-441932 ER - TY - THES A1 - Hartmann, Laura T1 - Synthese monodisperser, multifunktionaler Poly(amidoamine) und ihre Anwendung als nicht-virale Vektoren für die Gentherapie T1 - Synthesis of monodisperse, multifunctional poly(amidoamines) and their application as non-viral vectors for gene therapy N2 - Die vorliegende Arbeit beschäftigt sich mit der Synthese monodisperser, multifunktionaler Poly(amidoamine) (PAAs). Die Klasse der PAAs ist besonders interessant für eine Anwendung im Bereich der Biomedizin, da sie meist nicht toxisch ist, eine sehr geringe Immunogenizität zeigt und eine erhöhte Zellmembranpermeabilität besitzt. Allerdings ist der Einsatz linearer PAAs bisher limitiert, da ihre Synthese nur den Zugang von hoch-polydispersen Systemen mit einer streng alternierenden oder statistischen Verteilung von Funktionalitäten erlaubt. Es ist daher von großem Interesse diese Polymerklasse durch die Möglichkeit eines sequenzdefinierten Aufbaus und der Integration von neuen Funktionalitäten zu verbessern. Um dies zu ermöglichen, wurden, vergleichbar mit der etablierten Festphasensynthese von Peptiden, schrittweise funktionale Disäure- und Diamin-Bausteine an ein polymeres Träger-Harz addiert. Der sequenzielle Aufbau ermöglicht die Synthese monodisperser PAAs und die Kontrolle über die Monomersequenz. Die Wahl der Monomer-Bausteine und ihrer Funktionalitäten kann dabei für jede Addition neu getroffen werden und entscheidet so über die Sequenz der Funktionalitäten im Polymerrückgrat. Die verwendete Chemie entspricht dabei der Standardpeptidchemie, so dass mit Hilfe eines Peptidsynthese-Automaten die Synthese vollständig automatisiert werden konnte. Die Verwendung spezieller Trägerharze, die bereits mit einem synthetischen Polymerblock wie PEO oder auch mit einem Peptid vorbeladen waren, erlaubt die direkte Synthese von PEO- und Peptid-PAA Blockcopolymeren. Da die hier dargestellten PAAs später auf ihre Eignung als multivalente Polykationen in der Gentherapie getestet werden sollten, wurden zunächst Bausteine gewählt, die den Einbau verschiedener Aminfunktionalitäten ermöglichen. Die Bausteine müssen dabei so gewählt sein, dass sie kompatibel sind mit der Chemie des Peptidsynthesizers und eine quantitative Addition ohne Neben- oder Abbruchreaktionen garantieren. Darüber hinaus ist der Einbau von Peptidsequenzen und Disulfid-Einheiten in die PAA-Kette möglich, die z. B. für einen selektiven Abbau des Polymers im Organismus genutzt werden können. Zusammenfassend lässt sich feststellen, dass die in dieser Arbeit vorgestellten PAA-Systeme großes Potenzial als nicht-virale Vektoren für die Gentransfektion bieten. Sie sind nicht toxisch und zeigen Zellaufnahme-Effizienzen von bis zu 77%. Die Gentransfereffizienz ist im Vergleich zu etablierten Polymer-Vektoren zwar noch sehr gering, aber die bisherigen Versuche zeigen bereits eine mögliche Ursache, nämlich die schlechte Freisetzung des Genmaterials innerhalb der Zelle. Eine Lösung dieses Problems bietet jedoch die weitere Modifizierung der PAA-Systeme durch den Einbau von Sollbruchstellen. Diese Sollbruchstellen ermöglichen einen programmierten Abbau des Polymers innerhalb der Zelle und damit sollte die Freisetzung des Genmaterials vom Träger deutlich erleichtert werden. Mögliche Bruchstellen sind z. B. enzymatisch gezielt spaltbare Peptideinheiten oder Disulfid-Einheiten, wie sie bereits als Bausteine für die PAA-Synthese vorgestellt wurden (vergl. Kapitel 4.4). Da nur innerhalb der Zelle ein reduzierendes elektrochemisches Potential besteht, werden z. B. Disulfid-Einheiten auch nur dort gespalten und bieten außerhalb der Zelle ausreichende Stabilität zum Erhalt der Polyplexstruktur. Neben einer Anwendung in der Gentherapie bieten die hier vorgestellten PAA-Systeme den Vorteil einer systematischen Untersuchung von Struktur-Eigenschafts-Beziehungen der Polyplexe. Es wurden verschiedene Zusammenhänge zwischen der chemischen Struktur der PAA-Segmente und der Art und Stärke der DNS-Komprimierung aufgezeigt. Die Komprimierungsstärke wiederum zeigte deutlichen Einfluss auf die Internalisierungsrate und damit auch Transfektionseffizienz. Darüber hinaus zeigte sich ein drastischer Einfluss des PEO-Blocks auf die Stabilisierung der Polyplexe sowie deren intrazelluläre Freisetzung bei Zusatz von Chloroquin. Dennoch bleiben aufgrund der Komplexität der Zusammenhänge noch viele Mechanismen der Transfektion unverstanden, und es muss Aufgabe folgender Arbeiten sein, das Potential der hier eingeführten monodispersen PAA-Systeme weiter auszuloten. So wäre z. B. eine Korrelation der Kettenlänge mit den Parametern der Polyplexbildung, der Zellaufnahme und Transfektionseffizienz von großem Interesse. Darüber hinaus bietet der Einbau von Sollbruchstellen wie kurzen Peptidsequenzen oder den hier bereits eingeführten Disulfid-Einheiten neue Möglichkeiten der gezielten Freisetzung und des programmierten Abbaus, die näher untersucht werden müssen. Neben der Anwendung im Bereich der Gentransfektion sind außerdem andere Gebiete für den Einsatz von monodispersen multifunktionalen PAAs denkbar, da diese kontrollierbare und einstellbare Wechselwirkungen ermöglichen. N2 - Recently, linear poly(amidoamine)s (PAAs) have received considerable attention due to their excellent biocompatibility and ease of synthesis.[1] PAAs are multifunctional polymers, which often exhibit low inherent immunogenicity and reduced cyto- as well as hemotoxicity in contrast to established, cationic polymers such as poly(ethylene imines) (PEI) or poly(L-lysines) (PLL).[2] This makes PAAs highly suitable for biomedical and pharmacological applications in the fields of drug and gene delivery.[1,2] However, the full potential of these polymers cannot be accessed since the synthesis proceeds via an uncontrolled polyaddition reaction leading to ill-defined products with Mw/Mn ≥ 2. This does not only make rational design of polymer properties and the precise positioning of functionalities along the polymer backbone difficult, furthermore product registration becomes complicated because legislation requires increasingly more defined products. Here we present a novel synthesis route towards multifunctional, sequence-defined polyamides.[3] A fully automated, solid-phase polymer synthesis was developed and utilized to obtain linear PAA segments. These exhibit no molecular weight or chemical distributions due to their monodispersity (Mw/Mn = 1) and their controlled monomer sequence. The compatibility of the PAA-synthesis with the standard Fmoc/tBu solid-phase supported peptide synthesis has been preserved, making this route a versatile approach to peptide-PAA (Pep-PAA) and poly(ethylene oxide)-PAA (PEO-PAA) conjugates. Several Pep-PAA and PEO-PAA conjugates were synthesized, exhibiting PAA segments with different cationic functionalities. These conjugates were analyzed concerning their cytotoxicity showing very promising results. Additionally their potential to complex plasmid-DNA and to form so-called polyplexes for non-viral gene delivery was tested. A strong relationship between the monomer sequence and the polyplex structure was observed, depending on the balance and total amount of tertiary, secondary and primary amine functionalities within the PAA-segment. Moreover the monomer sequence has a strong influence on the biological properties such as the cell-internalization of polyplexes as well as the transfection activity. This clear correlation between the chemical assembly and the resulting biological properties may help to further the understanding of the mechanisms of gene delivery by polymeric carriers and hence to promote the rational design of better suited systems. Even if the transfection activity for the PAA-polpylexes might still be not comparable to the established “gold standard” PEI, their low level of toxicity and the possibility to improve the system by adjusting the monomer sequence shows great potential as carrier systems in drug or gene delivery. KW - Poly(amidoamine) KW - Gentherapie KW - nicht-viral KW - monodispers KW - Monomersequenz KW - poly(amidoamine) KW - gene therapy KW - non-viral KW - monodisperse KW - monomer-sequence Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13129 ER - TY - THES A1 - Ihlenburg, Ramona T1 - Sulfobetainhydrogele mit biomedizinischem Anwendungspotential und deren Netzwerkcharakterisierung im Gleichgewichtsquellzustand N2 - In dieser Dissertation konnten erfolgreich mechanisch stabile Hydrogele über eine freie radikalische Polymerisation (FRP) in Wasser synthetisiert werden. Dabei diente vor allem das Sulfobetain SPE als Monomer. Dieses wurde mit dem über eine nukleophile Substitution erster bzw. zweiter Ordnung hergestellten Vernetzer TMBEMPA/Br umgesetzt. Die entstandenen Netzwerke wurden im Gleichgewichtsquellzustand im Wesentlichen mittels Niederfeld-Kernresonanzspektroskopie, Röntgenkleinwinkelstreuung (SAXS), Rasterelektronenmikroskopie mit Tieftemperaturtechnik (Kryo-REM), dynamisch-mechanische Analyse (DMA), Rheologie, thermogravimetrische Analyse (TGA) und dynamische Differenzkalorimetrie (DSC) analysiert. Das hierarchisch aufgebaute Netzwerk wurde anschließend für die matrixgesteuerten Mineralisation von Calciumphosphat und –carbonat genutzt. Über das alternierende Eintauchverfahren (engl. „alternate soaking method“) und der Variation von Mineralisationsparametern, wie pH-Wert, Konzentration c und Temperatur T konnten dann verschiedene Modifikationen des Calciumphosphats generiert werden. Das entstandene Hybridmaterial wurde qualitativ mittels Röntgenpulverdiffraktometrie (XRD), abgeschwächte Totalreflexion–fouriertransformierte Infrarot Spektroskopie (ATR-FTIR), Raman-Spektroskopie, Rasterelektronenmikroskopie (REM) mit energiedispersiver Röntgenspektroskopie (EDXS) und optischer Mikroskopie (OM) als auch quantitative mittels Gravimetrie und TGA analysiert. Für die potentielle Verwendung in der Medizintechnik, z.B. als Implantatmaterial, ist die grundlegende Einschätzung der Wechselwirkung zwischen Hydrogel bzw. Hybridmaterial und verschiedener Zelltypen unerlässlich. Dazu wurden verschiedene Zelltypen, wie Einzeller, Bakterien und adulte Stammzellen verwendet. Die Wechselwirkung mit Peptidsequenzen von Phagen komplettiert das biologische Unterkapitel. Hydrogele sind mannigfaltig einsetzbar. Diese Arbeit fasst daher weitere Projektperspektiven, auch außerhalb des biomedizinischem Anwendungsspektrums, auf. So konnten erste Ansätze zur serienmäßige bzw. maßgeschneiderte Produktion über das „Inkjet“ Verfahren erreicht werden. Um dies ermöglichen zu können wurden erfolgreich weitere Synthesestrategien, wie die Photopolymerisation und die redoxinitiierte Polymerisation, ausgenutzt. Auch die Eignung als Filtermaterial oder Superabsorber wurde analysiert. N2 - In this current thesis, mechanically stable hydrogels were successfully synthesized via free radical polymerization (FRP) in water. In particular, the sulfobetaine SPE served as a monomer. This was reacted with the crosslinker TMBEMPA/Br prepared via first- and second-order nucleophilic substitution, respectively. The resulting networks were analyzed in the equilibrium swelling state mainly by low-field nuclear magnetic resonance spectroscopy, small-angle X-ray scattering (SAXS), scanning electron microscopy with cryogenic technique (cryo-REM), dynamic mechanical analysis (DMA), rheology, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The hierarchical network was then used for matrix-controlled mineralization of calcium phosphate and carbonate. Using the alternate soaking method and varying mineralization parameters such as pH, concentration c and temperature T, different modifications of calcium phosphate could be generated. The resulting hybrid material was analyzed qualitatively by X-ray powder diffraction (XRD), attenuated total reflection Fourier transformed infrared spectroscopy (ATR-FTIR), Raman spectroscopy, scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDXS) and optical microscopy (OM) as well as quantitatively by gravimetry and TGA. For the potential use in medical technology, e.g. as implant material, the basic assessment of the interaction between hydrogel or hybrid material and different cell types is essential. For this purpose, different cell types, such as amoeba, bacteria and adult stem cells, were used. The interaction with peptide sequences of phages completes the biological subchapter. Hydrogels can be used in many different ways. This thesis therefore includes further project perspectives, also outside the biomedical application spectrum. Thus, first approaches to serial or customized production via the "inkjet" process could be achieved. To make this possible, other synthesis strategies such as photopolymerization and redox-initiated polymerization were successfully exploited. The suitability as filter material or superabsorbent was also analyzed. KW - Hydrogel KW - Calciumphosphat KW - Mineralisation KW - hydrogel KW - calcium phosphate KW - mineralization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-607093 ER - TY - THES A1 - Klaumünzer, Bastian T1 - Stickstoffinversion in Azacyclen : Modellsimulationen für einen molekularen Schalter T1 - Nitrogen inversion in azacycles : model simulations for a molecular switch N2 - In dieser Arbeit wird durch Modellrechnungen gezeigt, wie die Stickstoffinversion in Azacyclen als molekularer Schalter genutzt werden könnte. Hierzu werden ein Fluorazetidin- und ein Fluorazacyclopentanderviat quantenchemisch untersucht. Das letztere Molekül wird auch quantendynamisch untersucht. Jedes der beiden Moleküle besitzt zwei stabile Konformationen. Es wird gezeigt, dass das Azabicyclopentanderivat von der einen Konformation mittels zweier linear polarisierter IR-Laserpulse durch sogenanntes “ladder climbing” in die andere überführt werden kann. N2 - In this work it is shown by model simulation, how the nitrogon inversion in azacycles could be used as a molecular switch. For this a azetidine derivative and a fluoroazabicyclopentane derivative have been investigated quantumchemically. Both of the molecules have two stable conformers. The latter molecule is also investigated quantumdynamically. Its is shown that the azabicyclopentanederivative can be switched from one conformer to the other by using two linear polarised IR laser pulses via ladder climbing. KW - Stickstoffinversion KW - Azacyclen KW - Laserkontrolle KW - molekularer Schalter KW - nitrogen inversion KW - azacycles KW - laser control KW - molecular switch Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17482 ER - TY - THES A1 - Ehlert, Christopher T1 - Simulationen von Röntgenabsorptionsprozessen zur Charakterisierung von Systemen in kondensierter Phase T1 - Simulation of X-ray absorption processes to characterize condensed phase systems N2 - Die vorgelegte Dissertation präsentiert wissenschaftliche Ergebnisse, die in der Zeit vom Dezember 2012 bis August 2016, erarbeitet wurden. Der zentrale Inhalt der Arbeit ist die Simulation von Röntgenabsorptionsprozessen von verschiedenen Systemen in kondensierter Phase. Genauer gesagt, werden Nahkantenabsorptions- (NEXAFS) sowie Röntgenphotoelektronenspektren (XPS) berechnet. In beiden Fällen wird ein Röntgenphoton von einem molekularen System absorbiert. Aufgrund der hohen Photonenenergie wird ein stark gebundenes kernnahes Elektron angeregt. Bei der XPS gelangt dieses mit einer zu messenden kinetischen Energie in Kontinuumszustände. In Abhängigkeit der eingestrahlten Photonenenergie und der kinetischen Energie des austreten Elektrons, kann die Bindungsenergie berechnet werden, welche die zentrale Größe der XPS ist. Im Falle der NEXAFS-Spektroskopie wird das kernnahe Elektron in unbesetzte gebundene Zustände angeregt. Die zentrale Größe ist die Absorption als Funktion der eingestrahlten Photonenenergie. Das erste Kapitel meiner Arbeit erörtert detailliert die experimentellen Methoden sowie die daraus gewonnenen charakteristischen Größen. Die experimentellen Spektren zeigen oft viele Resonanzen, deren Interpretation aufgrund fehlender Referenzmaterialien schwierig ist. In solchen Fällen bietet es sich an, die Spektren mittels quantenchemischer Methoden zu simulieren. Der dafür erforderliche mathematisch-physikalische Methodenkatalog wird im zweiten Kapitel der Arbeit erörtert. Das erste von mir untersuchte System ist Graphen. In experimentellen Arbeiten wurde die Oberfläche mittels Bromplasma modifiziert. Die im Anschluss gemessenen NEXAFS-Spektren unterscheiden sich maßgeblich von den Spektren der unbehandelten Oberfläche. Mithilfe periodischer DFT-Rechnungen wurden verschiedene Gitterdefekte sowie bromierte Systeme untersucht und die NEXAFS-Spektren simuliert. Mittels der Simulationen können die Beiträge verschiedener Anregungszentren analysiert werden. Die Berechnungen erlauben den Schluss, dass Gitterdefekte maßgeblich für die entstandenen Veränderungen verantwortlich sind. Polyvinylalkohol (PVA) wurde als zweites System behandelt. Hierbei sollte untersucht werden, wie groß der Einfluss der Molekularbewegung auf die Verbreiterung der Peaks im XP-Spektrum ist. Des Weiteren wurde untersucht, wie groß der Einfluss von intermolekularen Wechselwirkungen auf die Peakpositionen und Peakverbreiterung ist. Für die Berechnung dieses Systems wurde eine Kombination aus molekulardynamischen und quantenchemischen Methoden verwendet. Als Strukturen dienten Oligomermodelle, die unter dem Einfluss eines (ab initio) Potentials propagiert wurden. Entlang der erstellten Trajektorie wurden Schnappschüsse der Geometrien extrahiert und für die Berechnung der XP-Spektren verwendet. Die Spektren werden bereits mithilfe klassischer Molekulardynamik sehr gut reproduziert. Die erhaltenen Peakbreiten sind verglichen mit dem Experiment allerdings zu klein. Die Hauptursache der Peakverbreiterung ist die Molekularbewegung. Intermolekulare Wechselwirkungen verschieben die Peakpositionen um 0.6 eV zu kleineren Anregungsenergien. Im dritten Teil der Arbeit stehen die NEXAFS-Spektren von ionischen Flüssigkeiten (ILs) im Fokus. Die experimentell gefundenen Spektren zeigen eine komplexe Struktur mit vielen Resonanzen. In der Arbeit wurden zwei ILs untersucht. Als Geometrien verwenden wir Clustermodelle, die aus experimentellen Kristallstrukturen extrahiert wurden. Die berechneten Spektren erlauben es, die Resonanzen den Anregungszentren zuzuordnen. Außerdem kann eine erstmals gemessene Doppelresonanz simuliert und erklärt werden. Insgesamt kann die Interpretation der Spektren mithilfe der Simulation signifikant erweitert werden. In allen Systemen wurde zur Berechnung des NEXAFS-Spektrums eine auf Dichtefunktionaltheorie basierende Methode verwendet (die sogenannte Transition-Potential Methode). Gängige wellenfunktionsbasierte Methoden, wie die Konfigurationswechselwirkung mit Einfachanregungen (CIS), zeigen eine starke Blauverschiebung, wenn als Referenz eine Hartree-Fock Slaterdeterminante verwendet wird. Wir zeigen, dass die Verwendung von kernnah-angeregten Determinanten sowohl das resultierende Spektrum als auch die Anregungsenergien deutlich verbessert. Des Weiteren werden auch Referenzen aus Dichtefunktionalrechnungen getestet. Zusätzlich werden auch Referenzen mit gebrochenen Besetzungszahlen für kernnahe Elektronen verwendet. In der Arbeit werden die Resultate der verschiedenen Referenzen miteinander verglichen. Es zeigt sich, dass Referenzen mit gebrochenen Besetzungszahlen das Spektrum nicht weiter verbessern. Der Einfluss der verwendeten Elektronenstrukturmethode ist eher gering. N2 - The dissertation presents scientific results, which were worked out during December 2012 - August 2016. The work focuses on the simulation of X-ray absorption processes of several condensed phase systems. In particular, we calculated near edge X-ray absorption (NEXAFS) as well as X-ray photoelectron spectra (XPS). In both cases an incoming X-ray photon is absorbed by a molecular system. Due to the relatively high photon energy, a tightly bound core electron is excited. For XPS, this electron is promoted to high lying continuum states. The binding energy of the core electron, which is the key feature of XPS, can be calculated as the difference between the energy of the incoming photon and the measured kinetic energy of the electron. For NEXAFS spectra, the absorption probability of a photon as a function of the wavelength of the incoming radiation is measured. Both experimental methods are presented in chapter one of my thesis. Often the experimental spectra contain a lot of resonances, which make the interpretation and analysis complicated. In such cases, quantum chemical calculations can help to understand the spectra. In chapter two the central theoretical methods are presented, which are necessary to simulate the X-ray absorption processes. The first investigated system is graphene, which was treated with bromine plasma in order to modify the chemical and physical properties by adding bromine. The measured NEXAFS spectra of modified graphene show significant differences with respect to the spectra of the untreated surface. With the help of periodic density functional theory (DFT) calculations and simulations of spectra, it is demonstrated that physical defects are primarily responsible for the observed changes in the spectra. Polyvinyl alcohol (PVA) is the second investigated system. We were interested in the influence of the molecular motion on the broadening of the XPS peaks. Further, we looked at the intermolecular interactions and their influence on the peak positions and broadenings. In order to accomplish this, a combination of molecular dynamics and quantum chemical methods have been used. Appropriate structures based on oligomer models were created and propagated under the influence of an (ab initio) potential. Snapshots were taken during the propagation to calculate the core electron binding energies. In the third part of my work, Ionic Liquids have been investigated. The experiment found a very complex and complicated absorption behavior with a lot of resonances. We used cluster models, based on experimental crystallographic data, to simulate the spectra with density functional methods. Our calculations allow a comprehensive and in-depth analysis of the experimental spectra. The interpretation could be significantly extended. In all presented systems, the so-called transition potential (TP)-DFT method based on density functional theory has been used. Common wave function based methods like configuration interaction singles (CIS) are inappropriate to calculate X-ray absorption spectra, when a Hartree-Fock reference is used. We demonstrate that, by using core-hole excited determinants as reference wave function for CIS calculations, the quality of the obtained spectra can be significantly improved. We further investigate the influence of different density functionals as well as fractional occupations to the shape and position of the resulting spectra. KW - quantum chemical calculations KW - XPS KW - NEXAFS KW - DFT KW - condensed phase systems KW - quantenchemische Berechnungen KW - XPS KW - NEXAFS KW - DFT KW - kondensierte Phase Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-104844 ER - TY - GEN A1 - Dosche, Carsten A1 - Kumke, Michael Uwe A1 - Ariese, F. A1 - Bader, Arjen N. A1 - Gooijer, C. A1 - Dosa, P. I. A1 - Han, S. A1 - Miljanic, O. S. A1 - Vollhardt, K. Peter C. A1 - Puchta, R. A1 - Eikema Hommes, N. J. R. van T1 - Shpol’skii spectroscopy and vibrational analysis of [N]phenylenes N2 - Vibrationally resolved fluorescence spectra of four angular [N]phenylenes were recorded with laser excited Shpol’skii spectroscopy (LESS) in an n-octane matrix at 10 K. In general, the same vibrational frequencies were observed in the fluorescence excitation and emission spectra, indicating that the geometries of ground and electronically excited state are very similar. Because of intensity borrowing from the S2 state, vibrations of two different symmetries were observed in the fluorescence excitation spectra of angular [3]phenylene and zig-zag[5]phenylene. This finding allowed the location of the S2 state for these compounds. DFT calculations(RB3LYP/6-31G*) of the ground state vibrational frequencies were made. The calculated vibrational modes were in reasonably good agreement with the experimental data. A new very low-frequency vibration of approximately 100 cm-1 was predicted and experimentally confirmed for all [N]phenylenes investigated. This vibration seems to be unique for [N]phenylenes and is attributed to an in-plane movement of the carbon backbone. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 024 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13075 ER - TY - THES A1 - Krüger, Stefanie T1 - Seidenbasierte anorganische Funktionsmaterialien T1 - Silk based inorganic functional materials N2 - In der vorliegenden Arbeit konnten erfolgreich zwei unterschiedliche Hybridmaterialien (HM) über die Sol-Gel-Methode synthetisiert werden. Bei den HM handelt es sich um Monolithe mit einem Durchmesser von bis zu 4,5 cm. Das erste HM besteht aus Titandioxid und Bombyx mori Seide und wird als TS bezeichnet, während das zweite weniger Seide und zusätzlich Polyethylenoxid (PEO) enthält und daher als TPS abgekürzt wird. Einige der HM wurden nach der Synthese in eine wässrige Tetrachloridogoldsäure-Lösung getaucht, wodurch sich auf der Oberfläche Goldnanopartikel gebildet haben. Die Materialien wurden mittels Elektronenmikroskopie, energiedispersiver Röntgenspektroskopie, Ramanspektroskopie sowie Röntgenpulverdiffraktometrie charakterisiert. Die Ergebnisse zeigen, dass beide HM aus etwa 5 nm großen, sphärischen Titandioxidnanopartikeln aufgebaut sind, die primär aus Anatas und zu einem geringen Anteil aus Brookit bestehen. Die Goldnanopartikel bei TPS_Au waren größer und polydisperser als die Goldnanopartikel auf dem TS_Au HM. Darüber hinaus sind die Goldnanopartikel im TS HM tiefer in das Material eingedrungen als beim TPS HM. Die weiterführende Analyse der HM mittels Elementaranalyse und thermogravimetrischer Analyse ergab für TPS einen geringeren Anteil an organischen Bestandteilen im HM als für TS, obwohl für beide Synthesen die gleiche Masse an organischen Materialien eingesetzt wurde. Es wird vermutet, dass das PEO während der Synthese teilweise wieder aus dem Material herausgewaschen wird. Diese Theorie korreliert mit den Ergebnissen aus der Stickstoffsorption und der Quecksilberporosimetrie, die für das TPS HM eine höhere Oberfläche als für das TS HM anzeigten. Die Variation einiger Syntheseparameter wie die Menge an Seide und PEO oder die Zusammensetzung der Titandioxidvorläuferlösung hatte einen großen Einfluss auf die synthetisierten HM. Während unterschiedliche Mengen an PEO die Größe des HM beeinflussten, konnte ohne Seide kein HM in einer ähnlichen Größe hergestellt werden. Die Bildung der HM wird stark von der Zusammensetzung der Titandioxidvorläuferlösung beeinflusst. Eine Veränderung führte daher nur selten zur Bildung eines homogenen HM. Die in dieser Arbeit synthetisierten HM wurden als Photokatalysatoren für die Wasserspaltung und den Abbau von Methylenblau eingesetzt. Bei der photokatalytischen Wasserspaltung wurde zunächst der Einfluss unterschiedlicher Goldkonzentrationen beim TPS HM auf die Wasserstoffausbeute untersucht. Die besten Ergebnisse wurden bei einer Menge von 2,5 mg Tetrachloridogoldsäure erhalten. Darüber hinaus wurde gezeigt, dass mit dem TPS HM eine deutlich höhere Menge an Wasserstoff gewonnen werden konnte als mit dem TS HM. Die Ursachen für die schlechtere Aktivität werden in der geringeren spezifischen Oberfläche, der unterschiedlichen Porenstruktur, dem höheren Anteil an Seide und besonders in der geringeren Größe und höheren Eindringtiefe der Goldnanopartikel vermutet. Darüber hinaus konnte mit einem höheren UV-Anteil in der Lichtquelle sowie durch die Zugabe von Ethanol als Opferreagenz eine Zunahme der Wasserstoffausbeute erzielt werden. Bei dem Methylenblauabbau wurde für beide HM zunächst nur eine Adsorption des Methylenblaus beobachtet. Nach der Zugabe von Wasserstoffperoxid konnte nach 8 h bereits eine fast vollständige Oxidation des Methylenblaus unter sichtbarem Licht beobachtet werden. Die Ursache für die etwas höhere Aktivität von TPS gegenüber TS wird in der unterschiedlichen Porenstruktur und dem höheren Anteil an Seide im TS HM vermutet. Insgesamt zeigen beide HM eine gute photokatalytische Aktivität für den Abbau von Methylenblau im Vergleich zu den erhaltenen Werten aus der Literatur. N2 - Two different hybrid materials (HM) were successfully synthesized by the sol-gel-method. The first HM is based on titania and Bombyx mori silk and will be denoted as TS. The second HM is TPS and also contains titania but a lower amount of silk and additionally poly(ethylene oxide) (PEO). Furthermore some of the HM were immerse in aqueous hydrogen tetrachloroaurate solutions to deposit gold nanoparticles (AuNP) on the surface of the HM. All materials are monoliths with diameters of up to ca. 4.5 cm. Analysis via electron microscopy, energy dispersive X-ray spectroscopy, Raman spectroscopy, and X-ray powder diffraction shows that the HM are based on 5 nm titania nanoparticles (TNP) – mainly anatase with a minor fraction of brookite - and AuNPs on the order of 7-18 nm. Addition of PEO to the reaction mixture enables pore size tuning which were analyzed by nitrogen sorption and mercury intrusion porosimetry measurements. These observations correlate with the results from elemental and thermogravimetric analysis which show a lower amount of organic components in TPS than in TS HM. In both HM the amount of organic components used for the synthesis are the same. Therefore we suppose that PEO is washed out of the material during the synthesis which yield to a higher surface area and a lower amount of organic components. A further chapter of the thesis describes the variation of different synthesis parameter like amount of silk or PEO or the composition of the titania precursor solution. The results show that it is impossible to create a HM of about 4.5 cm without silk. Furthermore the amount of PEO influences the size of the HM whereas the composition of the titania precursor solution has a large effect on the synthesis of such HM. Furthermore both HM were tested for their photocatalytic activities for water splitting and methylene blue (MB) degradation. Water splitting experiments using a sun simulator show that the new hybrid materials are effective water splitting catalysts and produce up to 30 mmol of hydrogen per 24 h. The amount of produced hydrogen is dependent on the HM (TPS_Au or TS_Au), the amount of AuNP, the addition of ethanol as sacrificial reagent or the light source. Studies of MB degradation show initially just an adsorption and not a degradation of MB. After the addition of hydrogen peroxide, there is an almost complete degradation of MB within 8 h. Both HM show a good photocatalytic activity for MB degradation compared with results from the literature. KW - photocatalytic water splitting KW - titania KW - Bombyx mori silk KW - gold KW - photokatalytische Wasserspaltung KW - Titandioxid KW - Gold KW - Bombyx mori Seide Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-404635 ER - TY - THES A1 - Gehrke, Nicole T1 - Retrosynthese von Perlmutt T1 - Retrosynthesis of nacre N2 - In dieser Arbeit ist es gelungen, die Bedeutung physikalisch-chemischer Mechanismen in der Biomineralisation gegenüber der bisher angenommenen Dominanz spezifischer biomolekularer Erkennungsmechanismen aufzuzeigen. Dazu wurden drei Ansätze verfolgt: Zum einen wurden Studien zur Calciumcarbonatkristallisation durchgeführt. Zum anderen wurde das Biomineral Perlmutt intensiv untersucht. Als drittes wurde ein Modellsystem entwickelt, mit dem künstliches Perlmutt synthetisiert und ein Mechanismus für die Perlmuttmineralisation vorgeschlagen werden konnte. Im ersten Schritt wurden in einem simplen Kristallisationsansatz komplexe Calciumcarbonatüberstrukturen ohne die Verwendung von Additiven synthetisiert. Es wurde gezeigt, daß diese durch orientierte Anlagerung von Nanopartikeln gebildet werden, bei der dipolare Felder eine wichtige Rolle zu spielen scheinen. Dieser Mechansimus war bislang für Calciumcarbonat unbekannt und ermöglicht die Synthese komplexer Kristallmorphologien, wodurch die Frage aufgeworfen wird, ob er bei der Biomineralbildung von Bedeutung sein kann. Durch Einsatz minimaler Mengen eines einfachen, synthetischen Additivs bei der Kristallisation wurden zu Überstrukturen angeordnete Aragonitplättchen synthetisiert, die von einer wenige nm dicken Schicht aus amorphen Calciumcarbonat umgeben sind. Eine solche Schicht wurde auch bei den Aragonitplättchen Perlmutts entdeckt (s.u.) und bietet möglicherweise in verschiedenen Systemen eine Erklärung für die Stabilisierung der sonst metastabilen Aragonitphase. Im zweiten Schritt wurden bei der Untersuchung von natürlichem Perlmutt zwei bislang unbekannte Strukturmerkmale entdeckt: Es gibt Bereiche, die nicht aus den charakteristischen Plättchen bestehen, sondern wesentlich weniger stark mineralisert sind. Die Mineralphase besteht in diesen Bereichen aus Nanopartikeln. Es wurde weiterhin gezeigt, daß die Aragonitplättchen von einer wenige nm dicken Schicht aus amorphem Calciumcarbonat umgeben ist. Die gängigen Modelle der Perlmuttbildung sind mit diesen Beobachtungen nicht zu vereinbaren und somit zu hinterfragen. Dagegen deuten diese Ergebnisse ein Wachstum von Perlmutt über ACC-Nanopartikel an. Unter der Annahme der Bedeutung physikalisch-chemischer Mechanismen in der Biomineralisation wurde schließlich als dritter Schritt ein Ansatz zur in vitro-Retrosynthese von Biomineralien ausgehend von ihrer unlöslichen Matrix entwickelt. Mit diesem Ansatz ist es erstmals gelungen, künstliches Perlmutt auf synthetischem Wege herzustellen, das morphologisch nicht vom Original zu unterscheiden ist. Die existierenden Unterschiede konnten zeigen, daß der Mineralisationsprozeß nicht auf ein spezifisches Mikroumgebungssystem beschränkt, sondern "allgemeiner gültig"' sein muß. Bei der Retrosynthese gibt es zwei Schlüsselfaktoren: Zum einen die demineralisierte unlösliche Perlmuttmatrix als dreidimensionales Gerüst für das künstliche Perlmutt, zum anderen amorphe Precursorpartikel, die die Mineralphase bilden. Es werden keinerlei Proteine oder andere Biomoleküle verwendet. Dieser Ansatz bietet die Möglichkeit, den Mineralisationsprozeß an einem in vitro-Modellsystem zu verfolgen, was für das in vivo-System, wenn überhaupt, nur unter starken Einschränkungen möglich ist. Es wurde gezeigt, daß das künstliche Perlmutt über die Mesoskalentransformation von ACC-Precursorn innerhalb der Matrix gebildet wird und als möglicher Mechanismus bei der Biomineralisation von natürlichem Perlmutt diskutiert. Es konnte in der vorliegenden Arbeit konsequent gezeigt werden, daß die Imitation von Biomineralisationsprozessen in in vitro-Ansätzen möglich ist, wobei chemisch-physikalische Parameter dominieren. In zukünftigen Studien sollten einerseits die mechanischen Eigenschaften des künstlichen Perlmutts untersucht werden, wofür sich in Vorversuchen im Rahmen dieser Arbeit die Nanoindentierung als geeignet herausgestellt hat. Es sollte geprüft werden, ob das hier ermittelte Prinzip zur Mineralisierung in der Materialentwicklung angewendet werden kann. Andererseits sollte die Retrosynthese auf andere Systeme ausgeweitet und in vivo-Studien durchgeführt werden, um die Gültigkeit der vorgeschlagenen Mechanismen zu überprüfen. N2 - This thesis highlights the importance of physical-chemical mechanisms in biomineralisation and, thus, challenges the widely accepted dominance of specific biomolecular recognition mechanisms. The work is divided into three parts: the first part addresses the crystallisation of calcium carbonate; the second part focuses on an intensive study of the biomineral, nacre, and, lastly, a retrosynthesis model system is designed and applied to synthesize artificial nacre. A mechanism for nacre mineralisation in nature is proposed. Initially, complex calcium carbonate superstructures were synthesized in the absence of any additive. These were shown to grow by an oriented attachment mechanism of nanoparticles, presumably under the influence of dipolar fields. This growth mechanism has, to date, not been described for calcium carbonate. This mechanism opens the possibility to synthesize complex crystal morphologies of calcium carbonate and arises the question as to whether it plays a role in the growth of biominerals. With the presence of small amounts of additives in calcium carbonate crystallisation it was possible to synthesize superstructures of aragonite platelets, each of which surrounded by a layer of amorphous calcium carbonate (ACC). Such ACC layers were also found in natural nacre (see below) and may explain the stabilisation of the metastable calcium carbonate polymorph aragonite. In the second part of this thesis two unknown features of nacre structures were distinguished: Some areas within the nacre do not consist of the characteristic aragonite platelets but are mineralized only to a low degree. In these areas the mineral phase is clearly composed of nanoparticles. Furthermore, the aragonite platelets of nacre are shown to be surrounded by an ACC layer. Both observations contradict the classical models of nacre growth mechanisms but hint towards a growth via ACC nanoparticles. Assuming the importance of physical-chemical mechanisms in biomineralisation, an approach for the in vitro retrosynthesis of biominerals was designed. Through this, it was possible, for the first time, to synthesize artificial nacre, which was indistinguishable in morphology from the original. The non-morphological differences between original and synthesized nacre showed that the biological process of mineralization is not limited to one specific microenvironment, but must be more general. Two key factors are of importance for the retrosynthesis approach: 1) The demineralised nacre matrix, which forms a scaffold for the artificial mineral phase and; 2) amorphous nanoparticles as precursors, which transform into the mineral phase. No proteins or other biomolecules were utilized. In this way, the biomineralisation process could be followed in an in vitro model, a process, which is hardly possible in such detail under in vivo conditions. This work proves that the artificial nacre grows by a mesoscale transformation of ACC nanoparticles, and discusses this mechanism as a possible growth mechanism of natural nacre. This work consequently shows that it is possible to imitate biomineralisation processes in vitro and that, in–vitro, these processes are driven by physico-chemical parameters. Future studies will involve investigation of the mechanical properties of the artificial nacre. First experiments indicate, that nanoindentation is hereby suitable. The potential application of the in vitro mineralization mechanism for new material development will be investigated. Furthermore, the retrosynthesis will be applied to other biomineral systems and, subsequently, in vivo studies will be performed so as to investigate the role of the proposed mechanisms for the natural biomineralisation process. KW - Biomineralisation KW - Perlmutt KW - Retrosynthese KW - Präkursor KW - Calciumcarbonat KW - physikalisch-chemisch KW - amorph KW - Mesoskalentransformation KW - biomineralization KW - nacre KW - retrosynthesis KW - mesoscale transormation KW - calcium carbonate Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7971 ER - TY - THES A1 - Morgner, Frank T1 - Quantenpunktbasiertes spektroskopisches Lineal mit Terbium-Komplexen als Donoren für optische FRET-Multiplexmessungen T1 - Quantum-dot based spectroscopic ruler with terbium-complexes as donors for multiplexed optical FRET measurements N2 - Der Förster-Resonanzenergietransfer (FRET) liefert einen wichtigen Beitrag bei der Untersuchung kleinskaliger biologischer Systeme und Prozesse. Möglich wird dies durch die r-6-Abhängigkeit des FRET, die es erlaubt Abstände und strukturelle Änderungen weit unterhalb der Beugungsgrenze des Lichts mit hoher Sensitivität und geringem Aufwand zu bestimmen. Die besonderen photophysikalischen Eigenschaften von Terbiumkomplexen (LTC) und Quantenpunkten (QD) machen sie zu geeigneten Kandidaten für hochsensitive und störungsarme Multiplex-Abstandsmessungen in biologischen Systemen und Prozessen. Die Abstandsbestimmungen setzen jedoch eine genaueste Kenntnis des Mechanismus des Energietransfers von LTC auf QD ebenso voraus, wie das Wissen um Größe und Gestalt letzterer. Quantenpunkte haben im Vergleich zu biologischen Strukturen ähnliche Dimensionen und können nicht als punktförmig betrachtet werden, wie es bei einfacheren Farbstoffen möglich ist. Durch ihre Form kommt es zu einer Abstandsverteilung innerhalb des Donor-Akzeptorsystems. Dies beeinflusst den Energietransfer und damit die experimentellen Ergebnisse. In dieser Arbeit wurde der Energietransfer von LTC auf QD untersucht, um zu einer Aussage hinsichtlich des Mechanismus der Energieübertragung und der dabei zu berücksichtigenden photophysikalischen und strukturellen Parameter von LTC und QD zu gelangen. Mit der Annahme einer Abstandsverteilung sollten die Größen der Quantenpunkte bestimmt und der Einfluss von Form und Gestalt auf den Energietransfer betrachtet werden. Die notwendigen theoretischen und praktischen Grundlagen wurden eingangs dargestellt. Daran schlossen sich Messungen zur photophysikalischen Charakterisierung der Donoren und Akzeptoren an, die Grundlage der Berechnung der FRET-Parameter waren. Die Förster-Radien zeigten die für den FRET von LTC auf QD typischen extrem hohen Werte von bis zu 11 nm. Zeitaufgelöste Messungen der FRET-induzierten Lumineszenz der Donoren und Akzeptoren in den beiden biomolekularen Modellsystemen Zink-Histidin und Biotin-Streptavidin beschlossen den praktischen Teil. Als Donor wurde Lumi4Tb gebunden an ein Peptid bzw. Streptavidin genutzt, Akzeptoren waren fünf verschiedene, kommerziell erhältliche Quantenpunkte mit Carboxyl- bzw. Biotinfunktionalisierung. Bei allen Donor-Akzeptor-Paarungen konnte FRET beobachtet und ausgewertet werden. Es konnte gezeigt werden, dass die gesamte Emission des Terbiums zum Energietransfer beiträgt und der Orientierungsfaktor ² den Wert 2/3 annimmt. Die Charakterisierung der Bindungsverhältnisse innerhalb der FRET-Paare von LTC und QD über Verteilungsfunktionen bietet über die Form der Verteilungskurve die Möglichkeit Aussagen über die Gestalt der FRET-Partner zu treffen. So war es möglich, die mittlere Form der Quantenpunkte als Sphäre zu bestimmen. Dies entsprach, insbesondere bei den in z-Richtung des Kristallgitters elongierten Quantenpunkten, nicht den Erwartungen. Dieser Befund ermöglicht daher bei zukünftigen Messungen eine Verbesserung der Genauigkeit bei Abstandsbestimmungen mit Quantenpunkten. Neben der Ermittlung der die FRET-Verteilung bestimmenden Gestalt der Quantenpunkte konnte im Rahmen dieser Arbeit anhand vergleichender Messungen die Dicke der Polymerhülle der QD bestimmt und so gezeigt werden, dass FRET-Paare aus lumineszenten Terbiumkomplexen und Quantenpunkten in der Lage sind, Abstände im Nano- bis Sub-Nanometerbereich aufzulösen. N2 - Förster resonance energy transfer (FRET) plays an important role in the study of small-scale biological systems and processes. This is made possible by the r-6-dependence of FRET, which allows for determination of distances and structural changes far below the diffraction limit of light with high sensitivity and low costs. The unique photophysical properties of terbium complexes (LTC) and quantum dots (QDs) make them suitable candidates for high-sensitivity, low-noise multiplex distance measurements in biological systems and processes. Estimating distances with these FRET-pairs requires a precise knowledge of the mechanism of energy transfer from LTC to QD as well as the knowledge of size and shape of the latter. Quantum dots have, compared to biological structures, similar dimensions and therefore can not be considered as point-like, as it is possible with smaller dyes. Due to their shape, there is a distance distribution within the donor-acceptor system. This influences the energy transfer and hence the experimental results. In this work, the energy transfer from LTC to QD was examined to come to a conclusion regarding the mechanism of energy transfer and the photophysical and structural parameters of LTC and QD to be considered. The adoption of a FRET-distance distribution due to a size distribution of quantum dots should yield to a size estimation of the nanoparticles as well as a conclusion of the influence of shape and form on energy transfer. The necessary theoretical and practical principles were described at the outset of this work. This description of the basic concepts was followed by the photophysical characterization of the donors and acceptors and the calculation of FRET parameters. The calculated Förster radii were typical for the FRET from LTC to QD and showed extremely high values of up to 11 nm. Time-resolved measurements of the FRET-induced luminescence of donors and acceptors in two biomolecular model binding systems namely zinc-histidine and biotin-streptavidin binding rounded the practical part. FRET-donors used were commercially available Lumi4Tb complexes bound to streptavidin or a peptide, respectively. As FRET-acceptors five different commercially available quantum dots with carboxyl- or biotin-functionalisation were used. For all donor-acceptor pairs FRET could be observed and evaluated. It could be shown that the whole emission of terbium contributes to energy transfer. Furthermore the orientation factor ² was estimated to have a value of 2/3 when using LTC as FRET-donors and QD as FRET-acceptors. The characterization of the bonding within the FRET pairs of LTC and QD with distribution functions allows for statements about the shape of the FRET partners via shape of the distribution curves. It was possible to determine the average shape of the quantum dots as a sphere. This outcome was, especially for (in z-direction of the crystal lattice) elongated quantum dots, in the contrary to the expectations. This finding therefore allows for improving the accuracy of distance determinations with quantum dots. Based on comparative measurements it was also possible to determine the thickness of the polymer shell of the QD demonstrating that FRET pairs of luminescent terbium complexes and quantum dots are capable of determining distances in the nanometer to sub-nanometer range. KW - Quantenpunkte KW - Lanthanoidkomplexe KW - FRET KW - Abstandsverteilungen KW - spektroskopisches Lineal KW - quantum dots KW - lanthanide complexes KW - FRET KW - distance distribution KW - spectroscopic ruler Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63576 ER - TY - THES A1 - Klaumünzer, Bastian T1 - Quantenchemische und molekulardynamische Untersuchungen zur Photoanregung von Riboflavin T1 - Quantum chemical and molecular dynamical studies of the photoexcitation of Riboflavin N2 - Die Photophysik und Photochemie von Flavinen sind aufgrund ihrer biologischen Funktion, inbesondere von Flavoproteinen, von großen Interesse. Flavoproteine spielen eine große Rolle in einer Vielzahl von biologischen Prozessen, z.B. Biolumineszenz, Entfernung von Radikalen, die bei oxidativem Stress entstehen, Photosynthese und DNA-Reparatur. Die spektroskopischen Eigenschaften des Flavin-Cofaktors machen diesen zu einem natürlichen Reporter für Veränderungen innerhalb des aktiven Zentrums. Deshalb sind die Flavoproteine eine der am meisten untersuchten Enzymfamilien. Eine biologische Aktivität des Flavins führt über einen elektronisch angeregten Zustand, wo dann, abhängig von der Aminosäureumgebung, ein bestimmter Mechanismus zu einem biologischen Prozess führt (Photozyklus). Ein wichtiges Analysetool zum Verständnis des anfänglichen Photoanregungsschritts der Flavine sind die elektronische und die Schwingungsspektroskopie. In dieser Arbeit wurden die Prozesse von Riboflavin (RF) während und nach optischer Anregung mit theoretischen Mitteln beleuchtet. Dazu wurden quantenchemische Berechnungen für Schwingungsspektren (vibratorische) von Riboflavin, auch Laktoflavin oder Vitamin B2 genannt, dem Grundmolekül der Chromophore biologischer Blaulichtrezeptoren, in dessen elektronischem Grundzustand und dessen niedrigsten angeregten Zustand durchgeführt. Weiterhin wurden vibronische (vibratorische+elektronische) Absorptionsspektren und ein vibronisches Emissionsspektrum berechnet. Die so berechneten Schwingungs- und elektronischen Spektren sind in guter qualitativer wie quantitativer Übereinstimmung mit gemessenen Werten, und helfen so, die experimentellen Signale der Photoanregung von Flavinen zuzuweisen. Unmittelbar nach der Photoanregung wurde ein Verlust des Doppelbindungscharakters im polaren Bereich des Ringssystems beobachtet, was zu der vibronischen Feinstruktur im elektronischen Absorptions- und Emissionsspektrum führte. Hier zeigte sich zudem, dass neben den vibronischen Effekten auch die Lösungsmitteleffekte wichtig für das quantitative Verständnis der Photophysik der Flavine in Lösung sind. Um Details des optischen Anregungsprozesses als initialen, elementaren Schritt zur Signalweiterleitung zu entschlüsseln, wurden ultraschnelle (femtosekundenaufgelöste) Experimente durchgeführt, die die Photoaktivierung des Flavins untersuchen. Diese Arbeit soll zu einem weiteren Verständnis und der Interpretation dieser Experimente durch das Studium der Post-Anregungsschwingungsdynamik von Riboflavin und mikrosolvatisiertem Riboflavin beitragen. Dazu wurde eine 200 fs lange Molekulardynamik in angeregten Zuständen betrachtet. Durch die Analyse charakteristischer Atombewegungen und durch die Berechnungen zeitaufgelöster Emissionsspektren fand man heraus, dass nach der optischen Anregung Schwingungen im Ringssystem des Riboflavins einsetzen. Mit Hilfe dieser Berechnungen kann die Umverteilung der Energie im angeregten Zustand beobachtet werden. Neben den theoretischen Untersuchungen zu Riboflavin in der Gasphase und auch in Lösung wurde ein Modell für eine BLUF (Blue-Light Photoreceptor Using Flavin) Domäne, ein Flavin benutzender Photorezeptor, erstellt. Hierbei zeigt sich, dass man die in dieser Arbeit angewendeten Analysemethoden auch auf biologisch relevante Systeme anwenden kann. N2 - The photophysics and photochemistry of flavins are due to their biological function, in particular of flavoproteins, of great interest. Flavoproteins play a major role in a variety of biological processes, eg Bioluminescence, removal of free radicals, resulting in oxidative stress, photosynthesis and DNA repair. The spectroscopic properties of the flavin cofactor make this a natural reporter for changes within the active site. Therefore flavoproteins are one of the most studied enzyme families. A biological activity of the flavin via an electronically excited state, which then performs a function of the amino acid environment, a specific mechanism to a biological process (photo cycle). An important analytical tool for the understanding of the initial step of the photoexcitation flavins are the electronic and vibrational spectroscopy. In this study, the processes of riboflavin (RF) during and after optical excitation illuminated by theoretical means. These quantum chemical calculations for the vibrational spectra (vibrational) of riboflavin, or vitamin B2 lactoflavin also been mentioned, the basic molecule of biological chromophores blue light receptors in the electronic ground state and the lowest excited state performed. Furthermore, vibronic (vibrational + electronic) absorption spectra and vibronic emission spectra were calculated. The calculated vibrational and electronic spectra are in good qualitative and quantitative agreement with measured values, and help to assign the experimental signals of the photo-excitation of flavins. Immediately after photoexcitation a loss of the double bond character was observed in the polar region of the ring system, leading to the vibronic fine structure in the electronic absorption and emission spectrum. It showed also that in addition to the vibronic effects, the solvent effects are important for a quantitative understanding of the photophysics of flavins in solution. To decipher details of the optical excitation process as initial, elementary step in signal transduction, ultrafast were performed (femtosecond-resolved) experiments that investigate the photoactivation of the flavin. This work will contribute to a further understanding and interpretation of these experiments by studying the post-excitation vibrational dynamics of riboflavin and riboflavin mikrosolvatisiertem. To a 200 fs long molecular dynamics in excited states was considered. By the analysis of characteristic atomic motions and by the calculations of time-resolved emission spectra, it was found that, after the optical excitation oscillations in the ring system of the riboflavin used. Using these calculations, the energy redistribution in the excited state can be observed. In addition to the theoretical studies of riboflavin in the gas phase and in solution, a model for a BLUF (Blue Light Photoreceptor Using flavin) domain, a flavin-use photoreceptor created. It is shown that one can apply the analytical methods employed in this work and to biologically relevant systems. KW - Riboflavin KW - Photoanregung KW - BLUF KW - ab-initio Dynamik KW - Vibronik KW - Riboflavin KW - Photoexcitation KW - BLUF KW - ab-initio dynamics KW - vibronics Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63171 ER - TY - THES A1 - Jiang, Yuan T1 - Precursor phases in non-classical crystallization N2 - The main objective of this thesis is to understand molecular crystallization as a multistep process with or without polymeric additives, including transient liquid-liquid phase separation, nanocrystal nucleation within the dense phase, and subsequent nanocrystal self-assembly or self-organization in sequence. The thesis starts with a quaternary model system, containing DL-Glutamic acid (Glu), polyethyleneimine (PEI), water, and EtOH, for the understanding of multistep precipitation of Glu with PEI as an additive. The experiments were performed by mixing Glu-PEI aqueous solution with a non-solvent EtOH. First, the phase diagram of the quaternary system is determined, obtaining precipitate, coacervates, or homogeneous mixtures by varying Glu/PEI w/w and water/EtOH v/v. Coacervation is observed to occur over a wide range of Glu/PEI with various volumes. The composition of coacervates is conveniently characterized by nuclear magnetic resonance spectroscopy. The observed coacervates are thermodynamically stable phases rich in solute, which is different from metastable polymer-induced liquid precursors. The combination of atomic force microscopy, small angle scattering, and ξ-potential measurements confirms the coexistence of monomers and Glu/PEI complexes and the aggregation of complexes in Glu-PEI-water systems. This suggests that there might be a direct structural transformation between the Glu-PEI complexes in aqueous solution and the metastable liquid precursors in a water-EtOH mixture. The multistep mechanism of Glu precipitation with PEI as an additive is investigated thereafter. The combination of stopped flow and small angle scattering demonstrates that the initially formed liquid precursors pass through an alteration of growth and coalescence. Combined with results from optical microscopy and scanning electron microscopy, the nucleation of nanoplatelets happens within each liquid precursor droplet, and nanoplatelets reorient themselves and self-organize into a radial orientation in the crystalline microspheres. The recipe was then extended to the precipitation of organics in other oppositely charged amino acid-polyelectrolyte systems. After the success in preparing hierarchical microspheres in solution, the similar recipe can be extended to the preparation of patterned thin films on substrate. By dipping a quaternary DL-Lys·HCl (Lys)–polyacrylic acid (PAA)–water–EtOH dispersion on a hydrophilic slide, the fast evaporation process of the volatile solvent EtOH is responsible for the homogeneous nucleation of NPs. Then, the following complete evaporation causes the mesocrystallization of a continuous spherulitic thin film along the receding line of the liquid, which again transforms into a mesocrystalline thin film. Furthermore, annealing is used to optimize the property of mesocrystalline thin films. As evaporation is a non-equilibrium process, it can be used to tune the kinetics of crystallization. Therefore, hierarchical or periodical thin films are obtainable by starting the evaporation from microspheres recrystallization, obtaining mesocrystalline thin films with 4 hierarchy levels. The results reveal that evaporation provides an easy but effective way for the formation of patterned structures via the positioning of NPs after their fast nucleation, resulting in different kinds of patterns by controlling the concentration of NPs, solvent evaporation rate, and other physical forces. Non-classical crystallization is not limited to crystallizations with polymeric additives. We also observed the nucleation and growth of a new molecular layer on the growing DL-Glu·H2O crystals from a supersaturated mother liquor by using an in-situ atomic force microscopy (AFM), where the nucleation and growth of a molecular layer proceed via amorphous nanoparticle (NP) attachment and relaxation process before the observation of the growth of a newly formed molecular layer. NP attachment to the crystal surface is too fast to observe by using in-situ AFM. The height shrinkage of NPs, combined to the structural transformation from 3D amorphous NPs to 2D crystalline layer, is observed during the relaxation process. The nucleation and growth of a newly formed molecular layer from NP relaxation is contradictory to the classical nucleation theory, which hypothesizes that nuclei show the same crystallographic properties as a bulk crystal. The formation of a molecular layer by NP attachment and relaxation rather than attachment of single molecules provides a different picture from the currently held classical nucleation and growth theory regarding the growth of single crystals from solution. N2 - Das Hauptziel dieser Arbeit ist das Verständnis der molekularen Kristallisation, sowohl mit als auch ohne polymere Additive, als einen mehrstufigen Prozess. Dieser beinhaltet eine transiente flüssig-flüssig Phasentrennung, die Nukleation von Nanokristallen in der dichten flüssigen Precursor-Phase so wie eine anschließende nanokristalline Selbstorganisation. Die Arbeit beginnt mit Untersuchungen an einem quaternären Modelsystem bestehend aus DL-Glutamat (Glu), Polyethylenimin (PEI), Wasser und Ethanol. Das Phasendiagramm dieses quaternären Systems wird durch Variation der Glu/PEI w/w und Wasser/EtOH v/v Verhältnisse bestimmt, wobei Präzpitat aus polymerinduzierten flüssigen Precursor, Koazervate oder homogene Mischungen erhalten werden Das thermodynamisch stabile Koazervat kann als Referenz für das Verständnis von flüssigen Precursorn angesehen werden, welche in der Natur metastabil und transient sind. Der mehrstufige Mechanismus der Glu-Präzipitation mit PEI als Additiv wird dann mittels Neutronen Kleinwinkelstreuung untersucht. Dies zeigt, dass die ursprünglich gebildeten flüssigen Precursor noch vor der Nukleation von Nanokristallen einen Wechsel von Wachstum und Koaleszenz durchlaufen. Die Ergebnisse aus optischer- und Eletronenmikroskopie zeigen, dass sowohl die flüssigen Precursor Superstrukturen ausbilden als auch, dass die Nukleation von Nanoplättchen in jedem einzelnen Precursor Tropfen von statten geht. Dies geschieht noch bevor sich die Nanoplättchen selbst in einer radialen Orientierung ausrichten. Diese Studie liefert die Kinetik der Präzipitation von organischen Stoffen in Gegenwart von polymeren Additiven. Eine ähnliche Vorgehensweise wie für die Herstellung von Mikrokügelchen kann für die Darstellung von gemusterten Filmen angewandt werden. Die homogene Nukleation von Nanopartikeln (NPs) findet während der Verdampfung einer quarternären DL-Lys·HCl-Polyacrylsäure-Wasser-Ethanol Dispersion auf einer hydrophilen Oberfläche statt. Die darauffolgende vollständige Verdampfung löst die Mesokristallisation eines kontinuierlichen sphärolithischen dünnen Films aus, welcher sich wiederum in einen mesokristallinen dünnen Film umwandelt. Mesokristalline Filme mit 4 Hierarchiestufen bzw. auch periodische Filme werden durch die Verdampfung der Mikrokügelchen-Dispersion erhalten. Die Ergebnisse zeigen, dass die Verdampfung eine einfache aber effektive Methode zur Herstellung von verschieden gemusterten hierarchischen Filmen darstellt. Nicht-klassische Kristallisation wird auch in der Abwesenheit von polymeren Additiven beobachtet. Wir verfolgen mittels Rasterkraftmikroskop (AFM) die Nukleation und das Wachstum einer neuen molekularen Schicht auf wachsenden DL-Glu·H2O Kristallen aus übersättigter Mutterlauge. Die Bildung einer neuen molekularen Schicht verläuft durch die Anlagerung von amorphen Nanopartikeln. Das Schrumpfen der NPs zusammen mit der strukturellen Änderung von dreidimensionalen NPs zu 2D Schichten wird während dieses Relaxationsprozesses beobachtet. Schließlich kommt es zu der Ausbildung einer neuen molekularen Schicht. Die Bildung einer molekularen Schicht durch die Anlagerung von Nanopartikeln aus der Lösung und die darauffolgende Relaxation liefert ein abweichendes Bild zu der bisher gängigen klassischen Theorie des Kristallwachstums. T2 - Vorstufenphasen in nichtklassischer Kristallisation KW - Mesokristall KW - Vorstufe KW - Kristallisation KW - mesocrystal KW - precursor KW - crystallization Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52460 ER - TY - THES A1 - Mai, Tobias T1 - Polymerunterstützte Calciumphosphatmineralisation T1 - Polymer supported calcium phosphate mineralization N2 - Im Verlauf dieser Arbeit sind Blockcopolymere verschiedener Ladung auf Basis von PEO mit hohen Molekulargewichten durch lebendende freie radikalische Polymerisation hergestellt worden. Die Polymere sind einfach im Grammmaßstab herstellbar. Sie zeigen sowohl einen großen Einfluss auf die Nukleation als auch auf die Auflösung von Calciumphosphat. Gleichwohl scheint das Vorhandensein von positiven Gruppen (Kationen, Ampholyten und Betainen) keinen dramatischen Einfluss auf die Nukleation zu haben. So verursachen Polymere mit positiven Ladungen die gleiche Retentionwirkung wie solche, die ausschließlich anionische Gruppen enthalten. Aus der Verwendung der kationischen, ampholytischen und betainischen Copolymere resultiert allerdings eine andersartige Morphologie der Niederschläge, als aus der Verwendung der Anionischen hervorgeht. Bei der Stabilisierung einer HAP-Oberfläche setzt sich dieser Trend fort, das heißt, rein anionische Copolymere wirken stärker stabilisierend als solche, die positive Ladungen enthalten. Durch Inkubation von menschlichem Zahnschmelz mit anionischen Copolymeren konnte gezeigt werden, dass die Biofilmbildung verglichen mit einer unbehandelten Zahnoberfläche eingeschränkt abläuft. All dies macht die Polymere zu interessanten Additiven für Zahnpflegeprodukte. Zusätzlich konnten auf Basis dieser rein anionischen Copolymere Polymerbürsten, ebenfalls über lebendende freie radikalische Polymerisation, hergestellt werden. Diese zeichnen sich durch einen großen Einfluss auf die Kristallphase aus und bilden mit dem CHAP des AB-Types das Material, welches auch in Knochen und Zähnen vorkommt. Erste Cytotoxizitätstests lassen auf das große Potential dieser Polymerbürsten für Beschichtungen in der Medizintechnik schließen. N2 - The thesis at hand describes the preparation of block-copolymers composed of uncharged polyethyleneoxides and differently charged methacrylate-based blocks. Synthesized via living free-radical polymerization the charged blocks were prepared by using of the following monomers: I) for anionic blocks 3-Sulfopropyl methacrylate potassium salt (SPM); II) for cationic blocks 2-(trimethyl ammonium) ethyl methacrylate chloride (TMAEMA) or2-(N-3-Cyanopropyl-N,N-dimethyl ammonium chloride) ethyl methacrylate (CPDMAEMA); III) for betainic blocks [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (MEDSAH) and IV) for ampholytic blocks the anionic SPM and one of the two cationic monomers TMAEMA or CPDMAEMA were used in equal parts. The polymers were accessible in a multigram scale. The resulting block-copolymers show a strong effect on both the dissolution and the nucleation of calcium phosphate. The presence of positively charged moieties in case of applying polycations, polyampholytes and polybetaines does not seem to influence the nucleation in a different manner than the negatively charged polyanions. Nontheless the application of cationic, betainic or ampholytic polymers leads to different morphology of the calcium phosphate precipitates compared to the anionic polymers. The presence of anions results in the formation of spherical well-separated particles whereas cations, ampholytes and betaines cause the composition of smaller particles. In contrast to this data obtained by energy-dispersive X-ray spectroscopy and X-ray crystallography show that calcium deficient hydroxyapatite was formed in all cases. Therefore it can be concluded that the polymers' charge influences the morphology but not the crystal phase. This observation extends to the stabilization of the hydroxyapatite's (HAP) surface. A comparison of polymers containing cations and anionic polymers reveals a stronger stabilizing effect for anions. With the calcium phosphate's dissolution per monomer unit taken into consideration only the anionic charges lead to a stabilization of the HAP-surface at low polymer concentrations while in presence of positive charges a destabilization is observed. By incubating human enamel specimen with mixtures of anionic copolymers and natural human saliva a reduced biofilm formation could be detected when compared to polymer free saliva. Thus the polymers could be potentially used for dental care products. Additionally it was possible to synthesize polymer brushes based on the anionic copolymers' architecture. Again SPM was polymerized yet fastened on a silicon surface via living free-radical polymerization in a grafting-from mechanism. The brushes stand out due to a great influence on the crystal phase of calcium phosphate. They promote the formation of AB-type carbonate substituted hydroxyapatite (CHAP) a material in human bones and teeth that is formed increasingly with age. Initial cytotoxicity tests of both mineralized and unmineralized brushes indicate a high potential of the brushes for biomedical engineering. KW - Polymerchemie KW - polymer chemistry KW - Calciumphosphat KW - calcium phosphate KW - Mineralisation KW - mineralization Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89056 ER - TY - THES A1 - Bechthold, Nina T1 - Polymerisation in Miniemulsion N2 - Der Mechanismus der Miniemulsionsbildung bzw. polymerisation wird eingehend untersucht. Dabei werden Faktoren, wie die Tensidmenge, Ultraschalldauer und die Teilchengröße untersucht. Besonders werden auch noch Aspekte wie Stabilität der Emulsion und Kinetik während der Polymerisation untersucht. N2 - The mechanism of the formation and polymerisation of the miniemulsion respectively is thoroughly investigated. Parameters such as surfactant amount, duration of ultra sound and particle size are surveyed. Special emphasize is given to the aspects of stability of the emulsion and the kinetic of the polymerisation. ---- Anmerkung: Die Autorin wurde 2001 mit dem Publikationspreis des Leibniz-Kollegs Potsdam für Nachwuchswissenschaftler/innen in den Naturwissenschaften ausgezeichnet. KW - Miniemulsion KW - Emulsionspolymerisation Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000204 ER - TY - THES A1 - Meyer, Matthias T1 - PIPOX-PEP : kontrollierte Synthese und Aggregationsverhalten von Blockcopolymeren mit schaltbarer Hydrophilie T1 - PIPOX-PEP : controlled synthesis and aggregation behaviour of blockcopolymers with switchable hydrophilicity N2 - Es wurden Poly(2-isopropyl-2-oxazolin)-Makroinitiatoren mit terminaler Ammoniumtrifluoracetat-Endgruppe synthetisiert, die anschließend für die Ammonium vermittelte NCA Polymerisation in NMP eingesetzt wurden. Die hierbei synthetisierten Poly(2-isopropyl-2-oxazolin)-block-poly(L-glutamat) (PIPOX-PEP) Blockcopolymere hatten eine Molekulargewichtsverteilung von 1,2 (UZ). Es wurde beobachtet, dass Poly(2-isopropyl-2-oxazolin) bei langen Zeiten oberhalb der LCST irreversibel sphärische Strukturen bildet, die eine hierarchische Struktur besitzen und bei denen es sich möglicherweise um "large compound micelles" handelt. PIPOX-PEP kann in wässeriger Lösung bei langen Zeiten oberhalb der LCST "cottonball" Strukturen bilden. Die Aggregate wurden mittels Lichtstreuung, NMR und TEM charakterisiert. Im Rahmen der Arbeit wurden Strukturbildungsmodelle entwickelt. N2 - A convenient procedure for the synthesis of well-defined poly(2-isopropyl-2-oxazoline)-block-poly(L-glutamate) (PIPOX-PEP) through combined cationic/anionic ring-opening polymerization is described. The key step is the preparation of an ω-(ammonium trifluoroacetate)-poly(2-isopropyl-2-oxazoline), which is used as a macroinitiator for the “ammonium-mediated” polymerization of γ-benzyl L-glutamate N-carboxyanhydride (NCA). PIPOX is a thermoresponsive polymer exhibiting a lower critical solution temperature (LCST) near human body temperature, while PEP responds to changes in pH (helix-to-coil transition). The phase behavior of aqueous PIPOX and PIPOX-PEP solutions has been characterized by means of light scattering, NMR spectroscopy, and transmission electron microscopy (TEM). Phase transition is usually reversible, but renders irreversible when solution are annealed for longer times at 65 °C, far above the LCST. Coagulate particles with hierarchical ordering in the range of nanometers to micrometers, considered as “large compound micelles” or “cottonballs”, are then produced. A tentative mechanism for the formation of such particles is described. KW - Polymer KW - Polyoxazolin KW - Polypeptid KW - Aggregate KW - polyoxazoline KW - polypeptide KW - aggregate Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10832 ER - TY - THES A1 - Leiendecker, Mai-Thi T1 - Physikalische Hydrogele auf Polyurethan-Basis T1 - Physical hydrogels based on polyurethanes N2 - Physical hydrogels have gained recent attention as cell substrates, since viscoelasticity or stress relaxation is a powerful parameter in mechanotransduction, which has long been neglected. We designed multi-functional polyurethanes to form physical hydrogels via a unique tunable gelation mechanism. The anionic polyurethanes spontaneously form aggregates in water that are kept in a soluble state through electrostatic repulsion. Fast subsequent gelation can be triggered by charge shielding which allows the aggregation and network building to proceed. This can be induced by adding either acids or salts, resulting in acidic (pH 4-5) or pH-neutral hydrogels, respectively. Whereas conventional polyurethane-based hydrogels are commonly prepared from toxic isocyanate precursors, the physical hydrogelation mechanism described here does not involve chemically reactive species which is ideal for in situ applications in sensitive environments. Both stiffness and stress relaxation can be tuned independently over a broad range and the gels exhibit excellent stress recovery behavior. N2 - Physikalische Hydrogele gewinnen derzeit als Zellsubstrate zunehmend an Interesse, da Viskoelastizität oder Stressrelaxation ein bedeutender Parameter in der Mechanotransduktion ist, der bisher vernachlässigt wurde. In dieser Arbeit wurden multi-funktionelle Polyurethane entworfen, die über einen neuartigen Gelierungsmechanismus physikalische Hydrogele bilden. In Wasser bilden die anionischen Polyurethane spontan Aggregate, welche durch elektrostatische Abstoßung in Lösung gehalten werden. Eine schnelle Gelierung kann von hier aus durch Ladungsabschirmung erreicht werden, wodurch die Aggregation voranschreitet und ein Netzwerk ausgebildet wird. Dies kann durch die Zugabe von verschiedenen Säuren oder Salzen geschehen, sodass sowohl saure (pH 4 - 5) als auch pH-neutrale Hydrogele erhalten werden können. Während konventionelle Hydrogele auf Polyurethan-Basis in der Regel durch toxische isocyanat-haltige Präpolymere hergestellt werden, eignet sich der hier beschriebene physikalische Gelierungsmechanismus für in situ Anwendungen in sensitiven Umgebungen. Sowohl Härte als auch Stressrelaxation der Hydrogele können unabhängig voneinander über einen breiten Bereich eingestellt werden. Darüberhinaus zeichnen sich die Hydrogele durch exzellente Stressregeneration aus. KW - Polyurethane KW - Hydrogele KW - physikalische Hydrogele KW - Kolloidchemie KW - Viskoelastizität KW - Stressrelaxation KW - Stressrelaxierung KW - Bulkgele KW - Mikrogele KW - Mechanotransduktion KW - polyurethanes KW - hydrogels KW - physical hydrogels KW - colloidal chemistry KW - viscoelasticity KW - stress-relaxation KW - stress relaxation KW - bulk gels KW - microgels KW - mechanotransduction Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103917 ER - TY - THES A1 - Berdzinski, Stefan T1 - Photoinduzierte radikalische Polymerisation in ionischen Flüssigkeiten und der Einfluss der Radikalrekombination T1 - Photoinduced radical polymerization in ionic liquids and the influence of the radical recombination N2 - Die vorliegende Arbeit behandelt Untersuchungen zum Einfluss ionischer Flüssigkeiten sowohl auf den Rekombinationsprozess photolytisch generierter Lophylradikale als auch auf die photoinduzierte Polymerisation. Im Fokus standen hierbei pyrrolidiniumbasierte ionische Flüssigkeiten sowie polymerisierbare imidazoliumbasierte ionische Flüssigkeiten. Mittels UV-Vis-Spektroskopie wurde in den ionischen Flüssigkeiten im Vergleich zu ausgewählten organischen Lösungsmitteln die Rekombinationskinetik der aus o-Cl-HABI photolytisch generierten Lophylradikale bei unterschiedlichen Temperaturen verfolgt und die Geschwindigkeitskonstanten der Radikalrekombination bestimmt. Die Charakterisierung des Rekombinationsprozesses erfolgt dabei insbesondere unter Verwendung der mittels Eyring-Gleichung ermittelten Aktivierungsparameter. Hierbei konnte gezeigt werden, dass die Rekombination der Lophylradikale in den ionischen Flüssigkeiten im Gegensatz zu den organischen Lösungsmitteln zu einem großen Anteil innerhalb des Lösungsmittelkäfigs erfolgt. Weiterhin wurden für den Einsatz von o-Cl-HABI als Radikalbildner in den photoinduzierten Polymerisationen mehrere mögliche Co-Initiatoren über photokalorimetrische Messungen untersucht. Hierbei wurde auch ein neuer Aspekt zur Kettenübertragung vom Lophylradikal auf den heterocyclischen Co-Initiator vorgestellt. Darüber hinaus wurden photoinduzierte Polymerisationen unter Einsatz eines Initiatorsystems, bestehend aus o-Cl-HABI als Radikalbildner und einem heterocyclischen Co-Initiator, in den ionischen Flüssigkeiten untersucht. Diese Untersuchungen beinhalten zum einen photokalorimetrische Messungen der photoinduzierten Polymerisation von polymerisierbaren imidazoliumbasierten ionischen Flüssigkeiten. Zum anderen wurden Untersuchungen zur photoinduzierten Polymerisation von Methylmethacrylat in pyrrolidiniumbasierten ionischen Flüssigkeiten durchgeführt. Dabei wurden Einflussparameter wie Zeit, Temperatur, Viskosität, Lösungsmittelkäfigeffekt und die Alkylkettenlänge am Kation der ionischen Flüssigkeiten auf die Ausbeuten und Molmassen sowie Molmassenverteilungen der Polymere hin untersucht. N2 - This work examined the investigation of the influence of ionic liquids on both the recombination process of photolytically generated lophyl radicals and on the photoinduced polymerization. Pyrrolidinium-based ionic liquids as well as polymerizable imidazolium-based ionic liquids were here in particular interest. Recombination kinetics of photolytically generated lophyl radicals were examined in ionic liquids and selected organic solvents at different temperatures by using UV-Vis spectroscopy. Futhermore, rate constants and activation parameters of the radical recombination were used to characterize the recombination process in these different solvents. It was be shown that the recombination of the lophyl radicals occurs in the ionic liquids to a higher extent within the solvent cage in contrast to organic solvents. Also, prolongation of the alkyl chain at the cation of the ionic liquids leads to an increase of the in cage recombination in both the pyrrolidinium based ionic liquids, as well as in the ionic liquids of the polymerizable imidazolium based ionic liquids. Furthermore, selected coinitiators were investigated for photoinduced polymerization in combination with o-Cl-HABI as radical former by using photo calorimetry. Thereby a new aspect of the chain transfer from a lophyl radical to heterocyclic co-initiator was be shown. In addition, photo-induced polymerizations in the ionic liquids were investigated using an initiator system consisting of o-Cl-HABI as the radical former and a heterocyclic co-initiator. These studies include photo-induced polymerizations of polymerizable imidazolium-based ionic liquids, which were carried out by photo callorimetry. Furthermore, photo-induced polymerizations of methyl methacrylate were investigated in pyrrolidinium-based ionic liquids. In this conection time, temperature, viscosity, solvent cage effect and the alkyl chain length at the cation of the ionic liquids were examined as influencing parameters on yield, molecular weight and molecular weight distribution of the obtained polymers. KW - freie radikalische Polymerisation KW - ionische Flüssigkeiten KW - Radikalrekombination KW - lichtinduziert KW - free radical polymerization KW - ionic liquids KW - radical recombination KW - light induced Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72582 ER - TY - THES A1 - Bleek, Katrin T1 - Phosphonathaltige (Co)Polymere und ihr Einfluss auf die Mineralisation von Calciumphosphat T1 - Phosphonate containing (co)polymers and their influence on the mineralisation of calcium phosphate N2 - In der vorliegenden Arbeit wurden verschiedene Polymere hergestellt, die bestimmte funktionelle Gruppen beinhalten. Diese Gruppen werden zum Teil durch Alkylketten geschützt, zum Teil liegen sie ungeschützt im Polymer vor. Mit diesen Polymeren wurden Untersuchungen mit knochenähnlichen Materialien sogenanntem Calciumphosphat durchgeführt. Es wurde der Einfluss der verschiedenen Polymere auf die Bildung dieser knochenähnlichen Substanzen untersucht und auch der Einfluss auf die Stabilität und das Auflösungsverhalten der Calciumphosphate. Dabei sollte ein besonderes Augenmerk auf die funktionellen Gruppen, sogenannte Phosphonsäuren und deren Ester, die die Phosphonsäuren schützen, gesetzt werden. Es stellte sich heraus, dass bei der Bildung der knochenähnlichen Materialien die Polymere mit Estergruppen eine leichte Förderung der Calciumphosphat-Bildung verursachen, während die ungeschützten Polymere die Bildung des „Knochenmaterials“ sehr stark verzögern. Dieser Effekt verstärkt sich noch, wenn eine weitere bestimmte Komponente zum Polymer hinzukommt und somit ein Copolymer gebildet wird. Diese Copolymere beschleunigen bzw. verlangsamen die Calciumphosphatbildung noch stärker. Werden Polymere mit einem anderen Polymergerüst aber den gleichen Phosphonsäuresetern in den Seitenketten verwendet, ändert sich der Einfluss der Calciumphosphat-Bildung wenig. Verglichen mit Polymeren ohne solche Phosphonsäuregruppen wird erkennbar, dass es weniger die Phosphonsäuregruppe ist, die die Mineralisation beeinflusst, sondern es eher eine Folge der Säure im Polymer ist. Wird die Stabilisierung und Auflösung der Knochenähnlichen Substanzen betrachtet, fällt auf, dass auch hier wieder die Säuren den größten Effekt ausüben. Die Phosphonsäuregruppen scheinen dabei jedoch tatsächlich einen besonderen Effekt auszuüben, da bei diesen die Stabilisierung und auch das Auflösungsvermögen von Calciumphospaht von allen untersuchten Polymeren am größten sind. In der Arbeit konnte außerdem gezeigt werden, dass die Polymere und Copolymere mit Phosphonsäuregruppen einen leicht positiven Effekt auf die Zahngesundheit zeigen. Die Zahl von Bakterien auf der Zahnoberfläche konnte reduziert werden und bei der Untersuchung der Zahnauflösung wurde eine glattere Zahnoberfläche erhalten, jedoch wurde auch mit den untersuchten Polymeren der Zahn im Inneren angegriffen. Weitere Untersuchungen können hier noch genaueren Aufschluss geben. Außerdem sollten auch die Polymere mit dem unterschiedlichen Polymergerüst und Phosphonsäureestergruppen untersucht werden. Letztere Polymere wurden verwendet, um festere “gelartige“ Polymernetzwerke herzustellen und deren Einfluss auf die Calciumphosphatmineralisation zu untersuchen. Es stellte sich heraus, dass ohne das Einbetten einiger Calciumphosphatteilchen keine Bildung von Calciumphospaht an den Materialien ausgelöst wurde, wurden die sogenannten Hydrogele jedoch mit Calciumphosphatpartikeln geimpft, konnte deutliches weiteres Calciumphosphatwachstum beobachtet werden. Das Material lässt sich auch in verschiedene Formen bringen. Somit könnte das System nach weiteren Untersuchungen zur Verträglichkeit mit Zellen oder Geweben ein mögliches Material für Implantate darstellen, mit denen gezielt Knochenwachstum eingeleitet werden könnte. N2 - In the present work, various polymers containing certain functional groups have been prepared. Some of these groups are protected by alkyl chains, some of which are unprotected in the polymer. With these polymers, investigations were carried out with bone-like materials called calcium phosphate. The influence of the different polymers on the formation of these bone-like substances was investigated and also the influence on the stability and the dissolution behavior of the calcium phosphates. Particular attention should be paid to the functional groups, so-called phosphonic acids and their esters, which protect the phosphonic acids. It has been found that in the formation of the bone-like materials, the polymers with ester groups cause easy promotion of calcium phosphate formation, while the unprotected polymers greatly retard formation of the "bone material". This effect is further enhanced when a further specific component is added to the polymer and thus a copolymer is formed. These copolymers accelerate or slow calcium phosphate formation even more. If polymers with a different polymer backbone but the same phosphonic acid in the side chains used, the influence of calcium phosphate formation changes little. Compared with polymers without such phosphonic acid groups, it will be appreciated that it is less the phosphonic acid group that affects mineralization, but rather is a consequence of the acid in the polymer. If the stabilization and dissolution of the bone-like substances is considered, it is noticeable that here too the acids exert the greatest effect. The phosphonic acid groups, however, actually seem to exert a special effect, since in these the stabilization and also the dissolving power of calcium phosphate are the greatest of all the polymers investigated. The work also showed that the polymers and copolymers with phosphonic acid groups have a slightly positive effect on dental health. The number of bacteria on the surface of the tooth could be reduced, and in the study of tooth dissolution, a smoother tooth surface was obtained, but also with the investigated polymers the tooth was attacked inside. Further investigations can provide even more detailed information here. In addition, the polymers with the different polymer backbone and phosphonic ester groups should also be investigated. The latter polymers were used to make firmer "gel-like" polymer networks and study their influence on calcium phosphate mineralization. It was found that without the incorporation of some calcium phosphate particles no formation of calcium phosphate on the materials was initiated, however, the so-called hydrogels were inoculated with calcium phosphate particles, and significant further calcium phosphate growth could be observed. The material can also be put into different shapes. Thus, after further studies on compatibility with cells or tissues, the system could be a potential material for implants to target bone growth. KW - Calciumphosphat KW - Calcium phosphate KW - polymervermittelte Biomineralisation KW - polymer induced Biomineralization KW - phosphonathaltige Polymere KW - phosphonate containing polymers KW - Calcium Bindungsstelle KW - Calcium binding site Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-406630 ER - TY - THES A1 - Losik, Magdalena T1 - Phasenverhalten von Polypeptid-Blockcopolymeren N2 - Die vorliegende Arbeit beschreibt das Verhalten von Polypeptid-Blockcopolymeren in der festen Phase und in selektiven Lösungsmitteln. Blockcopolymere auf Basis von Poly(L-glutaminsäure-5-benzylester) (PBLGlu) oder Poly(Nε-benzoyloxycarbonyl-L-lysin) (PZLLys), die in dieser Arbeit eingesetzt wurden, besitzen wegen ihrer helikalen Sekundärstruktur eine sog. Stäbchen-Knäuel-Geometrie, wobei die Knäuelkomponente Polystyrol oder Polybutadien ist. Die Phasenbildung dieser Blockcopolymere ist durch die Packungseigenschaften des rigiden Blocks beeinflusst. Es wurden bevorzugt lamellare Strukturen gebildet, in denen die Stäbchen parallel angeordnet sind. Das Vorhandensein eines permanenten Dipolmomentes führt zur Wechselwirkung zwischen den Helices und zur Erhöhung des Ordnungsgrades in der Phase. Ein zusätzlicher Parameter, der die Morphologie der Phase beeinflußt, ist die Chiralität der Peptidhelix, durch die chirale Überstrukturen induziert werden. In dünnen Filmen (40 nm), wo die Geometrie begrenzt ist, führt es zu Frustrationen in der Phase. Die dadurch entstandene Spannung wurde durch einen zick-zack-artigen Lamellenverlauf abgebaut. In selektiven Lösungsmitteln für die synthetische Komponente (PS) bilden die Polypeptid-Blockcopolymere vesikuläre Strukturen, deren kugel- oder wurmförmige Geometrie von der Elastizität der Membran abhängig ist. Durch Entfernung der Z-Schutzgruppe kann PZLLys in eine wasserlösliche Form überführt werden, so dass die PB-PLLys Blockcopolymere unter Bildung von Vesikeln in Wasser löslich sind. Dabei ist die Konformation des Peptids vom pH-Wert des Mediums abhängig und kann von einem Knäuel zu einer Helix reversibel geschaltet werden. Beim Modifizieren der Sekundärstruktur wurde eine Änderung der Aggregationszahl beobachtet. Somit können diese Blockcopolymere für die Herstellung von schaltbaren Aggregaten eingesetzt werden. N2 - The presented work describes the behaviour of polypeptide-blockcopolymers in the solid-state and well as in selective solvents. Blockcopolymers consisting of PBLGlu or PZLLys , which have been utilized in this work, possess, because of their helical structure, a so-called Rod-Coil Geometry, where the coil component consists of polystyrene or polybutadiene. The phase morphology of these block copolymers is dominated by the packing properties of the rigid blocks. Most commonly, lamellar structures were formed, where the rods were ordered in a parallel fashion. The presence of a permanent dipole moment leads to an interaction between the helices and to an increase in the degree of order within the phase. An additional parameter that influences the phase morphology is the chirality of the peptide helix, which induces the formation of chiral superstructures. In thin films (40 nm), where the geometry is limited, a disordering within the phase is observed. The resulting tension leads to the formation of a zig-zag lamellar pattern. In selective solvents of the synthetic component (PS) of the blockcopolymer, formation of vesicular structures are observed, with spherical or worm-like geometry, depending on the elasticity of the membrane. Through removal of the z-protective groups, PZLLys becomes soluble in water, through the formation of PB-PLLys blockcopolymer vesicles. The conformation of the peptide is dependent on the pH value of the medium and can be reversibly changed from a coil to a helix structure. Through modification of the secondary structure, a change in the aggregation number is observed. Thereby, these blockcopolymers may find application in the fabrication of switchable aggregates. T2 - Phasenverhalten von Polypeptid-Blockcopolymeren KW - Stäbchen-Knäul; amphiphile Blockcopolymere; ; Polypeptide; Festphasen; Struktur; Morphologie; Kolloide; Selbstorganisation; Vesikel; schaltbare Aggr KW - rod-coil; amphiphilic block copolymers; polypeptide; solid state; structure; morphology; kolloids; self assembly; vesicles; switchable aggregates Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001613 ER - TY - GEN A1 - Brendler, Christian A1 - Bechmann, Wolfgang T1 - Pestizideinsatz gegen die Rosskastanien-Miniermotte (Cameraria ohridella) im Stadtgebiet Potsdam BT - Rückstandsanalytik 2005 N2 - In Deutschland hat sich in den letzten zehn Jahren die aus dem Balkan eingewanderte Rosskastanien-Miniermotte verbreitet; sie richtet vor allem in Ballungsgebieten an der weiß blühenden Rosskastanie starke Schäden an. Neben der vollständigen mechanischen Beseitigung und Entsorgung des Falllaubes im Herbst eignen sich zur Bekämpfung chemische Pflanzenschutzmittel. In Potsdam sind 2001 und 2003 an zwei Standorten befallene Rosskastanien versuchsweise mit zwei unterschiedlichen Pestiziden erfolgreich behandelt worden. 2005 wurden die Standorte beprobt und die Bodenproben auf Rückstände der verwendeten Mittel untersucht. TerraTech möchte Kommunen mit vergleichbarem Problem Hinweise auf Bekämpfungsmethoden geben, veröffentlicht diesen Beitrag aber vor allem unter dem Gesichtspunkt des Boden- und Grundwasserschutzes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 15 KW - Bodenschutz KW - Pestizid KW - Grundwasserschutz KW - Schädlingsbekämpfung KW - Untersuchung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12366 ER - TY - THES A1 - Rasch, Claudia T1 - Optische Spektroskopie zum Nachweis von Schimmelpilzen und deren Mykotoxine T1 - Optical spectroscopy for the determination of mould and mycotoxins N2 - Gesunde sowie qualitativ hochwertige Nahrungsmittel sind wichtige Voraussetzungen, um einerseits die Lebensmittelsicherheit entlang der Wertschöpfungskette (Wachstum, Verarbeitung, Lagerung und Transport) und andererseits einen vorbeugenden Verbraucherschutz zu gewährleisten. Die Belastung der Nahrung mit Rückständen jeglicher Art war in letzter Zeit häufig Mittelpunkt heftiger öffentlicher Diskussionen. Zahlreiche Untersuchungen haben gezeigt, dass unter bestimmten Bedingungen durch Pilze gebildete Giftstoffe, so genannte Mykotoxine, die Ernteprodukte belasten und es bei deren Verzehr durch Menschen oder Tiere zu Vergiftungen kommen kann. Die FAO schätzt, dass etwa 25% der Weltproduktion von Nahrungsmitteln mit Mykotoxinen kontaminiert und in 20% der Getreideernte der Europäischen Union messbare Konzentrationen an Mykotoxinen detektierbar sind. Damit die Lebensmittelsicherheit weiterhin gewährleistet bleibt, werden neben den Routinemethoden schnellere und zerstörungsfreie Methoden benötigt, um die Lebensmittel direkt vor Ort auf Schimmelpilze und deren Mykotoxine zu untersuchen. In dieser Arbeit wird das Potenzial von ausgewählten optisch-basierten spektroskopischen Methoden für die in-situ bzw. in-line Detektion von Schimmelpilzen sowie Mykotoxinen in Getreide(produkten) untersucht. Es werden Absorptions- und Reflexionsmethoden einerseits und Fluoreszenztechniken andererseits eingesetzt. Die spektroskopischen Methoden werden dabei auf Proben unterschiedlicher Komplexität angewandt - beginnend mit der Untersuchung der photophysikalischen Eigenschaften der reinen Mykotoxine in Lösung über künstlich mit verschiedenen Mykotoxinen kontaminierten Getreideproben bis hin zu mit Pilzen befallenem Getreide und hochveredelte Lebensmittel (Wein und Bier) als Proben höchster Komplexität. N2 - Problems of food safety have led to an increasing concern regarding contamination of foods and feeds with mycotoxins and the relevant toxigenic fungi, mainly Aspergillus, Penicillium and Fusarium genera. There is a real need for rapid, sensitive and inexpensive sensors for the detection of toxigenic fungi and mycotoxins, both in the field and after harvest in order to obtain real-time monitoring data on contamination and this assist in food safety assessment. This will result in an enormous cost saving to the farmers as well as to agro-food industry through the prevention and reduction of product recalls and reduced treatment costs. The German Ministry of Education and Research (BMBF) has provided funding of more than 1.9 million Euros from July 2006 to December 2009 for the large joint project "ProSeso.net2" on the development of innovative sensor-based techniques and processes in the field of food quality and safety. In this research-project "Exploration of sustainability potentials by use of sensor-based technologies and integrated assessment models in the production chain of plant related food" 13 partners from universities, non-university institutions and industry cooperate within seven subprojects. The expected results shall contribute to maintain freshness and improve safety of the food production chain. In the subproject “Indicators and sensor technology for the identification of mycotoxin producing fungi in the processing of grain” spectroscopic methods are tested for in-situ and in-line detection of moulds and/or mycotoxins. This presentation focuses on some possible spectroscopic methods for the rapid detection of mycotoxins and fungi on grains. Methods based on one- and two-photon-induced fluorescence spectroscopy are highly attractive because of their outstanding sensitivity and selectivity. In order to utilize a fluorescence technique for the analysis of the mycotoxins in food and feedstuff as well as for basic research on the fungal metabolism, the photochemistry and photophysics of the mycotoxins and fungi need to be elucidated in detail, especially the influence of solvent parameters such as polarity and pH value. Consequently, for a sensitive and selective spectroscopic analysis, it is indispensable to take the specific photophysic of the known mycotoxins into account in order to minimize serious limitations upon sensitivity, selectivity, and accuracy of a potential fluorescence-based sensing application. The spectroscopic techniques are complemented by chemometric tools (Principle Component Analysis) to extract the desired chemical information, e.g. with respect to presence of contaminations. The combination of data obtained from different spectroscopic methods (such as optimal excitation and emission wavelength, fluorescence decay times, and fluorescence quantum efficiency) on the one hand side and NIR spectroscopy on the other side shows promising results for the qualitative as well as quantitative identification of mycotoxins grains. Moreover, NIR reflectance spectra yield additional information on ingredients, moisture content, and the presence (or absence) of fungi in the sample. KW - Mykotoxine KW - Schimmelpilze KW - Fluoreszenz KW - Chemometrie KW - Zweiphotonenanregung KW - mycotoxins KW - mould KW - fluorescence KW - chemometrics KW - Two-Photon-Absorption Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-50746 ER - TY - GEN A1 - Frimmel, Fritz Hartmann A1 - Kumke, Michael Uwe T1 - Optische Parameter zur Stoffcharakterisierung vom Trinkwasser bis zum Abwasser N2 - Die Anwendung von optischen Parametern zur Stoffcharakterisierung wird diskutiert. Dabei ist der Schwerpunkt der Diskussion auf absorptions- und fluoreszenzspektroskopische Methoden gesetzt. Beide Methoden können schnell und zuverlässig – auch im on-line Betrieb – eingesetzt werden. Der Beitrag soll einen Überblick über die grundlegenden Möglichkeiten der Anwendung beider Methoden geben. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 025 KW - Absorptionsspektroskopie KW - SAK KW - Fluoreszenzspektroskopie KW - Summenparameter KW - Huminstoffe KW - polyzyklische aromatische Kohlenwasserstoffe Y1 - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13088 ER -