TY - JOUR A1 - Tiedemann, Ralph A1 - Schneider, Anja R. R. A1 - Havenstein, Katja A1 - Blanck, Torsten A1 - Meier, Elmar A1 - Raffel, Martina A1 - Zwartepoorte, Henk A1 - Plath, Martin T1 - New microsatellite markers allow high-resolution taxon delimitation in critically endangered Asian box turtles, genus Cuora JF - Salamandra : German journal of herpetology N2 - We isolated and characterized 16 new di- and tetranudeotide microsatellite markers for the critically endangered Asian box turtle genus Cuora, focusing on the "Cuora trifasciata" species complex. The new markers were then used to analyse genetic variability and divergence amongst five described species within this complex, namely C. aurocapitata (n = 18), C. cyclornata (n = 31), C. pani (n = 6), C. trifasciata (n = 58), and C. zhoui (n = 7). Our results support the view that all five species represent valid taxa. Within two species (C. trifasciata and C. cyclornata), two distinct morphotypes were corroborated by microsatellite divergence. For three individuals, morphologically identified as being of hybrid origin, the hybrid status was confirmed by our genetic analysis. Our results confirm the controversial species (Cuora aurocapitata, C. cyclornata) and subspecies/morphotypes (C. cyclornata meieri, C. trifasciata cf. trifasciata) to be genetically distinct, which has critical implications for conservation strategies. KW - Testudines KW - Cuora KW - box turtles KW - captive breeding KW - conservation units KW - microsatellites Y1 - 2014 SN - 0036-3375 VL - 50 IS - 3 SP - 139 EP - 146 PB - Deutsche Gesellschaft für Herpetologie und Terrarienkunde CY - Darmstadt ER - TY - THES A1 - Cao, Xianyong T1 - Vegetation and climate change in eastern continental Asia during the last 22 ka inferred from pollen data synthesis Y1 - 2014 ER - TY - THES A1 - Gaßmöller, René T1 - The interaction of subducted slabs and plume generation zones in geodynamic models Y1 - 2014 ER - TY - THES A1 - Feld, Christian T1 - Crustal structure of the Eratosthenes Seamount, Cyprus and S. Turkey from an amphibian wide-angle seismic profile T1 - Die Krustenstruktur von dem Eratosthenes Seeberg, Zypern und der Süd-Türkei anhand eines amphibischen seismischen Weitwinkel Profils N2 - In March 2010, the project CoCoCo (incipient COntinent-COntinent COllision) recorded a 650 km long amphibian N-S wide-angle seismic profile, extending from the Eratosthenes Seamount (ESM) across Cyprus and southern Turkey to the Anatolian plateau. The aim of the project is to reveal the impact of the transition from subduction to continent-continent collision of the African plate with the Cyprus-Anatolian plate. A visual quality check, frequency analysis and filtering were applied to the seismic data and reveal a good data quality. Subsequent first break picking, finite-differences ray tracing and inversion of the offshore wide-angle data leads to a first-arrival tomographic model. This model reveals (1) P-wave velocities lower than 6.5 km/s in the crust, (2) a variable crustal thickness of about 28 - 37 km and (3) an upper crustal reflection at 5 km depth beneath the ESM. Two land shots on Turkey, also recorded on Cyprus, airgun shots south of Cyprus and geological and previous seismic investigations provide the information to derive a layered velocity model beneath the Anatolian plateau and for the ophiolite complex on Cyprus. The analysis of the reflections provides evidence for a north-dipping plate subducting beneath Cyprus. The main features of this layered velocity model are (1) an upper and lower crust with large lateral changes of the velocity structure and thickness, (2) a Moho depth of about 38 - 45 km beneath the Anatolian plateau, (3) a shallow north-dipping subducting plate below Cyprus with an increasing dip and (4) a typical ophiolite sequence on Cyprus with a total thickness of about 12 km. The offshore-onshore seismic data complete and improve the information about the velocity structure beneath Cyprus and the deeper part of the offshore tomographic model. Thus, the wide-angle seismic data provide detailed insights into the 2-D geometry and velocity structures of the uplifted and overriding Cyprus-Anatolian plate. Subsequent gravity modelling confirms and extends the crustal P-wave velocity model. The deeper part of the subducting plate is constrained by the gravity data and has a dip angle of ~ 28°. Finally, an integrated analysis of the geophysical and geological information allows a comprehensive interpretation of the crustal structure related to the collision process. N2 - Im März 2010 wurden im Rahmen des "CoCoCo"-Projektes ein 650km langes amphibisches, seismisches Weitwinkel Profil aufgenommen. Dieses erstreckte sich von dem Eratosthenes Seeberg (ESM) über Zypern und der Süd-Türkei bis zum anatolischen Plateau. Das Hauptziel des Projektes ist es, den Einfluss zu untersuchen, der von dem Übergang eines Subduktion Prozesses hin zu einer Kontinent-Kontinent Kollision der afrikanischen Platte mit der zyprisch-anatolischen Platte hervorgerufen wird. Die seismischen Daten wurden einer visuelle Qualitätsüberprüfung, Frequenz-Analyse und Filterung unterzogen und zeigten eine gute Qualität. Das darauf folgende Picken der Ersteinstätze, eine Finite-Differenzen Raytracing und eine Inversion der offshore Weitwinkel Daten, führte zu einem Laufzeit Tomographie Model. Das Modell zeigt (1) P-Wellengeschwindigkeiten kleiner als 6.5 km/s in der Kruste, (2) eine variable Krustenmächtigkeit von 28 - 37 km und (3) eine obere Krustenreflektion in 5 km Tiefe unter dem ESM. Zwei Landschüsse in der Türkei, ebenfalls aufgenommen auf Zypern, Luftkanonen-Schüsse südlich von Zypern und vorausgegangene geologische und seismische Untersuchungen lieferten die Grundlage, um ein geschichtetes Geschwindigkeitsmodell für das anatolische Plateau und für den Ophiolith-Komplex auf Zypern abzuleiten. Die Analyse der Reflexionen liefert den Beweis für eine nach Norden einfallende Platte welche unter Zypern subduziert. Die Hauptkennzeichen dieses geschichteten Geschwindigkeitsmodelles sind (1) eine obere und untere Kruste mit starken lateral Änderungen in Geschwindigkeit und Mächtigkeit, (2) eine Mohotiefe in 38 - 45 km unter dem anatolischen Plateau, (3) eine flach nach Norden einfallende Platte unter Zypern mit ansteigendem Einfallwinkel und (4) eine typische Ophiolith Sequenz auf Zypern mit einer Gesamtmächtigkeit von 12 km. Die seismischen offshore / onshore Daten komplettieren und verbessern die bisherigen Kenntnisse über die Geschwindigkeitsstruktur unter Zypern und des tieferen Bereiches der offshore Tomographie. Damit liefert die Weitwinkel Seismik detaillierte Einblicke in die 2-D Geometrie und die Geschwindigkeitsstrukturen der angehobenen und überlagerten zyprisch-anatolischen Platte. Die darauf folgende Gravimetrie Modellierung bestätigt und erweitert das P-Wellen Krusten-Geschwindigkeits Modell. Der tiefere Teil der subduzierten Platte, welche einen Einfallswinkel von ~ 28° hat, wurde durch die Gravimetrie Daten belegt. Letztlich erlaubt eine ganzheitliche Analyse von geophysikalischen und geologischen Informationen die umfassende Interpretation der Krustenstruktur welche in Verbindung mit dem Kollisions Prozess steht. KW - incipient continent-continent collision KW - crustal structure of the Eratosthenes Seamount KW - controlled source wide angle seismic KW - crustal structure of south central Turkey KW - Cyprus arc KW - aktive Weitewinkel-Seismik KW - Krustenstruktur des Eratosthenes Seeberges KW - beginnende Kontinent-Kontinent Kollision KW - Krustenstruktur der Süd-Türkei KW - Zypernbogen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-73479 ER - TY - THES A1 - Tympel, Jens Günter T1 - Numerical modeling of the Cenozoic Pamir-Tien Shan orogeny Y1 - 2014 ER - TY - THES A1 - Borchardt, Sven T1 - Rainfall, weathering and erosion BT - quantification of earth surface processes in Suguta Valley, northern Kenya, using multispectral and hyperspectral data Y1 - 2014 ER - TY - THES A1 - Pussak, Marcin T1 - Seismic characterization of geothermal reservoirs by application of the common-reflection-surface stack method and attribute analysis T1 - Seismische Charakterisierung von geothermischen Reservoiren mittels “Common-Reflection-Surface” Stapelungs-Methode und Attribut-Analysen N2 - An important contribution of geosciences to the renewable energy production portfolio is the exploration and utilization of geothermal resources. For the development of a geothermal project at great depths a detailed geological and geophysical exploration program is required in the first phase. With the help of active seismic methods high-resolution images of the geothermal reservoir can be delivered. This allows potential transport routes for fluids to be identified as well as regions with high potential of heat extraction to be mapped, which indicates favorable conditions for geothermal exploitation. The presented work investigates the extent to which an improved characterization of geothermal reservoirs can be achieved with the new methods of seismic data processing. The summations of traces (stacking) is a crucial step in the processing of seismic reflection data. The common-reflection-surface (CRS) stacking method can be applied as an alternative for the conventional normal moveout (NMO) or the dip moveout (DMO) stack. The advantages of the CRS stack beside an automatic determination of stacking operator parameters include an adequate imaging of arbitrarily curved geological boundaries, and a significant increase in signal-to-noise (S/N) ratio by stacking far more traces than used in a conventional stack. A major innovation I have shown in this work is that the quality of signal attributes that characterize the seismic images can be significantly improved by this modified type of stacking in particular. Imporoved attribute analysis facilitates the interpretation of seismic images and plays a significant role in the characterization of reservoirs. Variations of lithological and petro-physical properties are reflected by fluctuations of specific signal attributes (eg. frequency or amplitude characteristics). Its further interpretation can provide quality assessment of the geothermal reservoir with respect to the capacity of fluids within a hydrological system that can be extracted and utilized. The proposed methodological approach is demonstrated on the basis on two case studies. In the first example, I analyzed a series of 2D seismic profile sections through the Alberta sedimentary basin on the eastern edge of the Canadian Rocky Mountains. In the second application, a 3D seismic volume is characterized in the surroundings of a geothermal borehole, located in the central part of the Polish basin. Both sites were investigated with the modified and improved stacking attribute analyses. The results provide recommendations for the planning of future geothermal plants in both study areas. N2 - Ein wichtiger Beitrag der Geowissenschaften zur Bereitstellung erneuerbarer Energien besteht in der Nutzbarmachung von geothermischen Ressourcen. Für die Entwicklung von geothermischen Anlagen in großen Tiefen ist in der ersten Phase eine detaillierte geologisch-geophysikalische Erkundung erforderlich. Hierbei werden Informationen über das Temperaturfeld, zur Litho-Stratigraphie und Strukturgeologie, Geomechanik, Hydrogeologie sowie petrophysikalische Eigenschaften im Reservoir-Maßstab benötigt. Mit Hilfe aktiver seismischer Methoden können hochauflösende Abbilder des geothermischen Reservoirs geliefert werden. Dadurch können potentielle Transportwege für Fluide sowie Regionen mit hohem Wärmeabsorptionspotential identifiziert und kartiert werden. Die vorgelegte Arbeit untersucht, inwieweit mit neuen Methoden der seismischen Datenbearbeitung eine verbesserte Charakterisierung von geothermischen Reservoiren erreicht werden kann. Die Stapelung ist ein entscheidender Schritt bei der Bearbeitung von seismischen Felddaten. Die sogenannte “common-reflection-surface” Stapelung ist eine Erweiterung des klassischen Stapelungs-Konzepts. Durch ihre Anwendung können detailliertere und zuverlässigere Abbilder des Untergrundes gewonnen werden. Als wichtige Neuerung habe ich in der Arbeit aufgezeigt, dass durch diese modifizierte Art der Stapelung insbesondere die Qualität von Signalattribut-Darstellungen der seismischen Abbilder signifikant verbessert wird. Signalattribute sind ein wichtiges Werkzeug bei der Untersuchung von Reservoiren. Variationen der lithologischen und petrophysikalischen Eigenschaften spiegeln sich in Variationen in bestimmten Signalattributen (z.B. Frequenzeigenschaften, Amplitudeneigenschaften) wieder. Daraus kann auf die Qualität des geothermischen Reservoirs, z.B. hinsichtlich der Aufnahmefähigkeit von Fluiden zur Wärmeabsorption in Kreislaufsystemen, geschlossen werden. Das vorgeschlagenen methodische Konzept wird an Hand von 2 Fallstudien demonstriert. Im ersten Beispiel analysierte ich eine Reihe von 2D seismischen Profilschnitten durch das Alberta-Sedimentbecken am Ostrand der kanadischen Rocky Mountains. Bei der zweiten Anwendung wird ein 3D seismisches Volumen im Umfeld einer Geothermie-Bohrung im Zentralteil des Polnischen Sedimentbeckens mit Hilfe der modifizierten Stapelung und verbesserten Attribut-Analysen charakterisiert. Die Ergebnisse ermöglichen Empfehlungen für die Planung zukünftiger Geothermie-Anlagen in beiden Untersuchungsgebieten. KW - seismic KW - geothermischer Reservoire KW - seismische Stapelungs-Methode KW - Attribut-Analysen KW - Verarbeitung seismischer Daten KW - Common-Reflection-Surface Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-77565 ER - TY - THES A1 - Schollaen, Karina T1 - Tracking climate signals in tropical trees T1 - Klimasignale in tropischen Hölzern BT - new insights from Indonesian stable isotope records BT - neue Erkenntnisse von stabilen Isotopendaten aus Indonesien N2 - The tropical warm pool waters surrounding Indonesia are one of the equatorial heat and moisture sources that are considered as a driving force of the global climate system. The climate in Indonesia is dominated by the equatorial monsoon system, and has been linked to El Niño-Southern Oscillation (ENSO) events, which often result in severe droughts or floods over Indonesia with profound societal and economic impacts on the populations living in the world's fourth most populated country. The latest IPCC report states that ENSO will remain the dominant mode in the tropical Pacific with global effects in the 21st century and ENSO-related precipitation extremes will intensify. However, no common agreement exists among climate simulation models for projected change in ENSO and the Australian-Indonesian Monsoon. Exploring high-resolution palaeoclimate archives, like tree rings or varved lake sediments, provide insights into the natural climate variability of the past, and thus helps improving and validating simulations of future climate changes. Centennial tree-ring stable isotope records | Within this doctoral thesis the main goal was to explore the potential of tropical tree rings to record climate signals and to use them as palaeoclimate proxies. In detail, stable carbon (δ13C) and oxygen (δ18O) isotopes were extracted from teak trees in order to establish the first well-replicated centennial (AD 1900-2007) stable isotope records for Java, Indonesia. Furthermore, different climatic variables were tested whether they show significant correlation with tree-ring proxies (ring-width, δ13C, δ18O). Moreover, highly resolved intra-annual oxygen isotope data were established to assess the transfer of the seasonal precipitation signal into the tree rings. Finally, the established oxygen isotope record was used to reveal possible correlations with ENSO events. Methodological achievements | A second goal of this thesis was to assess the applicability of novel techniques which facilitate and optimize high-resolution and high-throughput stable isotope analysis of tree rings. Two different UV-laser-based microscopic dissection systems were evaluated as a novel sampling tool for high-resolution stable isotope analysis. Furthermore, an improved procedure of tree-ring dissection from thin cellulose laths for stable isotope analysis was designed. The most important findings of this thesis are: I) The herein presented novel sampling techniques improve stable isotope analyses for tree-ring studies in terms of precision, efficiency and quality. The UV-laser-based microdissection serve as a valuable tool for sampling plant tissue at ultrahigh-resolution and for unprecedented precision. II) A guideline for a modified method of cellulose extraction from wholewood cross-sections and subsequent tree-ring dissection was established. The novel technique optimizes the stable isotope analysis process in two ways: faster and high-throughput cellulose extraction and precise tree-ring separation at annual to high-resolution scale. III) The centennial tree-ring stable isotope records reveal significant correlation with regional precipitation. High-resolution stable oxygen values, furthermore, allow distinguishing between dry and rainy season rainfall. IV) The δ18O record reveals significant correlation with different ENSO flavors and demonstrates the importance of considering ENSO flavors when interpreting palaeoclimatic data in the tropics. The findings of my dissertation show that seasonally resolved δ18O records from Indonesian teak trees are a valuable proxy for multi-centennial reconstructions of regional precipitation variability (monsoon signals) and large-scale ocean-atmosphere phenomena (ENSO) for the Indo-Pacific region. Furthermore, the novel methodological achievements offer many unexplored avenues for multidisciplinary research in high-resolution palaeoclimatology. N2 - Die tropischen Gewässer um Indonesien sind eine der äquatorialen Wärme- und Feuchtigkeitsquellen, die als treibende Kraft des globalen Klimasystems betrachtet werden können. Das Klima in Indonesien ist geprägt durch das Australisch-Indonesische Monsunsystem. Weiterhin besteht eine Verknüpfung mit El Niño-Southern Oszillation (ENSO) Ereignissen, die oft zu schweren Dürren oder Überschwemmungen in der Region mit tiefgreifenden gesellschaftlichen und wirtschaftlichen Folgen führen. Der neueste IPCC-Bericht legt dar, dass ENSO auch in den nächsten 100 Jahren das vorherrschende Klimaphänomen im tropischen Pazifik bleiben wird. Ferner wird davon ausgegangen, dass sich die ENSO-bezogenen Niederschlagsextrema intensivieren werden. Wenig Übereinstimmung herrscht jedoch bislang zwischen den Klimasimulationsmodellen in Bezug auf die voraussichtlichen Veränderungen von ENSO und dem Australisch-Indonesischen Monsunsystem. Hochaufgelöste Paläoklima-Archive, wie z.B. Jahrringe oder warvierte Seesedimente, geben Auskunft über die natürliche Klimavariabilität der Vergangenheit und können somit dazu beitragen, die Computersimulationen der künftigen Klimaentwicklung zu verbessern und zu validieren. Hundertjährige stabile Jahrring-Isotopenchronologien | Das Hauptziel dieser Doktorarbeit war es, dass Potenzial von tropischen Jahrringen zur Aufzeichnung von Klimasignalen herauszustellen und deren Evaluierung als Paläoklimaproxys. Im Detail wurden stabile Kohlenstoff- (δ13C) und Sauerstoff- (δ18O) Isotopenverhältnisse in Teakbäumen analysiert, und die ersten gut replizierten hundertjährigen (AD 1900-2007) stabilen Isotopenchronologien aus Java (Indonesien) erstellt. Dabei wurden verschiedene klimatische Einflussgrößen getestet, ob diese signifikante Korrelationen mit den Jahrringparametern aufzeigen. Weiterhin wurden hochaufgelöste intra-annuelle Sauerstoffisotopenzeitreihen erstellt, um den Transfer des saisonalen Niederschlagssignals in den jeweiligen Jahrring zu bemessen. Die ermittelte Sauerstoff-Isotopenchronologie wurde anschließend auf mögliche ENSO Signale hin untersucht. Methodische Errungenschaften | Ein zweites Ziel dieser Arbeit war es neue Verfahren zur Analyse stabiler Isotope in Baumjahrringen zu entwickeln und zu optimieren. Zwei verschiedene UV-Lasermikrodissektions-Systeme wurden getestet als neues präzises Präparationswerkzeug für stabile Isotopenstudien. Darüber hinaus wurde eine verbesserte Methode für die Probenaufbereitung stabiler Isotopenmessungen anhand von Zellulose-Dünnschnitten entwickelt. Die wichtigsten Ergebnisse dieser Doktorarbeit sind: I) Die hier vorgestellten neuartigen Techniken zu Probenvorbereitung verbessern die Analyse stabiler Isotope für Jahrringstudien in Hinsicht auf Präzision, Effizienz und Qualität. Es wurde gezeigt, dass die UV-Lasermikrodissektion eine wertvolle Technik ist, um die Beprobung von Pflanzengewebe in höchster Auflösung und beispielloser Präzision durchzuführen. II) Es ist gelungen, einen Leitfaden für ein modifiziertes Verfahren der Zelluloseextraktion an Gesamtholz-Dünnschnitten und der anschließenden Jahrringaufbereitung zu erstellen. Diese neuartige Methode optimiert die Analyse stabiler Isotopenzeitreihen in zweierlei Hinsicht: schnellere und effiziente Zelluloseextraktion und präzise Trennung der Jahrringsequenzen in inter-annueller bis intra-annuelle Auflösung. III) Die hundertjährigen stabilen Jahrring-Isotopenchronologien weisen signifikante Korrelationen mit dem regionalen Niederschlag auf. In den hochaufgelösten stabilen Sauerstoffisotopenwerten spiegelt sich deutlich das Niederschlagssignal der Trocken- und der Regenzeit wieder. IV) Die stabile Sauerstoffisotopenzeitreihe zeigt signifikante Korrelationen mit verschiedenen ENSO Phasen. Dies betont, dass die verschiedenen ENSO Phasen bei der Interpretation von tropischen Paläodaten zu berücksichtigen sind. Die Ergebnisse der Dissertation zeigen, dass saisonal aufgelöste stabile Sauerstoffisotopenchronologien von indonesischen Teakbäumen ein geeigneter Proxy für mehrhundertjährige Rekonstruktionen der regionalen Niederschlagsvariabilität (Monsun-Signale) und großräumiger Ozean-Atmosphären-Systeme (ENSO) für den Indopazifik ist. Darüber hinaus bieten die neuartigen methodischen Errungenschaften viele neue Ansätze für multidisziplinäre hochaufgelöste Studien in der paläoklimatologischen Forschung. KW - Stabile Sauerstoff- und Kohlenstoffisotope KW - Dendroklimatologie KW - Tectona grandis KW - Tropen KW - UV-Lasermikrodissektion KW - oxygen and carbon stable isotopes KW - dendroclimatology KW - Tectona grandis KW - tropics KW - UV-laser microdissection Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71947 ER - TY - THES A1 - Liebs, Göran T1 - Ground penetration radar wave velocities and their uncertainties T1 - Georadar-Wellengeschwindigkeiten mit Fehlerrechnung BT - global inversion of GPR traveltimes to assess uncertainties in CMP velocity models N2 - We develop three new approaches for ground penetration wave velocity calcultaions. The first is based on linear moveout spectra to find the optimum ground wave velocity including uncertainties from multi-offset data gathers. We used synthetic data to illustrate the principles of the method and to investigate uncertainties in ground wave velocity estimates. To demonstrate the applicability of the approach to real data, we analyzed GPR data sets recorded at field sites in Canada over an annual cycle from Steelman & Endres [2010]. The results obtained by this efficient and largely automated procedure agree well with the manual achieved results of Steelman & Endres [2010], derived by a more laborious largely manual analysis strategy. Then we develop a second methodology to global invert reflection traveltimes with a particle swarm optimization approach more precise then conventional spectral NMO-based velocity analysis (e.g., Greaves et al. [1996]). For global optimization, we use particle swarm optimization (PSO; Kennedy & Eberhart [1995]) in the combination with a fast eikonal solver as forward solver (Sethian [1996]; Fomel [1997a]; Sethian & Popovici [1999]). This methodology allows us to generate reliability CMP derived models of subsurface velocities and water content including uncertainties. We test this method with synthetic data to study the behavior of the PSO algorithm. Afterward, We use this method to analyze our field data from a well constrained test site in Horstwalde, Germany. The achieved velocity models from field data showed good agreement to borehole logging and direct-push data (Schmelzbach et al. [2011]) at the same site position. For the third method we implement a global optimization approach also based on PSO to invert direct-arrival traveltimes of VRP data to obtain high resolution 1D velocity models including quantitative estimates of uncertainty. Our intensive tests with several traveltime data sets helped to understand the behavior of PSO algorithm for inversion. Integration of the velocity model to VRP reflection imaging and attenuation model improved the potential of VRP surveying. Using field data, we examine this novel analysis strategy for the development of petrophysical models and the linking between GPR borehole and other logging data to surface GPR reflection data. N2 - Unterschiedliche Verfahren zur Ermittlung von Georadar-Wellengeschwindigkeiten wurden entwickelt und erfolgreich angewendet. Für die Verfahren wurden statistische Methoden und Schwarmintelligenz-Algorithmen benutzt. Es wurde gezeigt, dass die neuen Verfahren schneller, präziser und besser reproduzierbare Ergebnisse für Georadar-Wellengeschwindigkeit erzielen als herkömmliche Verfahren. Mit verbesserten Werten der Georadar-Wellengeschwindigkeit lassen sich die verzerrten dreidimensionalen Abbilder der obersten zehn Meter des Untergrundes, welche sich mit Georadar-Daten erzeugen lassen, korrigieren. In diesen korrigierten Abbildern sind dann realistische Tiefen von Schichten oder Objekten im Untergrund besser messbar. Außerdem verbessern präzisere Wellengeschwindigkeiten die Bestimmung von Bodenparametern, wie Wassergehalt oder Tonanteil. Die präsentierten Verfahren erlauben eine quantitative Angabe von Fehlern der bestimmten Wellengeschwindigkeit und der daraus folgenden Tiefen und Bodenparametern im Untergrund. Die Vorteile dieser neu entwickelten Verfahren zur Charakterisierung des Untergrundes der oberen Meter wurde an Feldbeispielen demonstriert. KW - ground-penetration radar KW - wave velocities KW - global inversion KW - particle swarm optimisation KW - soil water content KW - subsurface KW - geophyics KW - Georadar KW - Wellengeschwindigkeit KW - globale Inversion KW - Partikel Swarm Optimierung KW - Bodenwassergehalt KW - Untergrund KW - Geophysik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436807 ER - TY - JOUR A1 - Schaefer, Kevin A1 - Lantuit, Hugues A1 - Romanovsky, Vladimir E. A1 - Schuur, Edward A. G. A1 - Witt, Ronald T1 - The impact of the permafrost carbon feedback on global climate JF - Environmental research letters N2 - Degrading permafrost can alter ecosystems, damage infrastructure, and release enough carbon dioxide (CO2) and methane (CH4) to influence global climate. The permafrost carbon feedback (PCF) is the amplification of surface warming due to CO2 and CH4 emissions from thawing permafrost. An analysis of available estimates PCF strength and timing indicate 120 +/- 85 Gt of carbon emissions from thawing permafrost by 2100. This is equivalent to 5.7 +/- 4.0% of total anthropogenic emissions for the Intergovernmental Panel on Climate Change (IPCC) representative concentration pathway (RCP) 8.5 scenario and would increase global temperatures by 0.29 +/- 0.21 degrees C or 7.8 +/- 5.7%. For RCP4.5, the scenario closest to the 2 degrees C warming target for the climate change treaty, the range of cumulative emissions in 2100 from thawing permafrost decreases to between 27 and 100 Gt C with temperature increases between 0.05 and 0.15 degrees C, but the relative fraction of permafrost to total emissions increases to between 3% and 11%. Any substantial warming results in a committed, long-term carbon release from thawing permafrost with 60% of emissions occurring after 2100, indicating that not accounting for permafrost emissions risks overshooting the 2 degrees C warming target. Climate projections in the IPCC Fifth Assessment Report (AR5), and any emissions targets based on those projections, do not adequately account for emissions from thawing permafrost and the effects of the PCF on global climate. We recommend the IPCC commission a special assessment focusing on the PCF and its impact on global climate to supplement the AR5 in support of treaty negotiation. KW - permafrost carbon feedback KW - permafrost KW - global climate Y1 - 2014 U6 - https://doi.org/10.1088/1748-9326/9/8/085003 SN - 1748-9326 VL - 9 IS - 8 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Martinez-Garzon, Patricia A1 - Kwiatek, Grzegorz A1 - Sone, Hiroki A1 - Bohnhoff, Marco A1 - Dresen, Georg A1 - Hartline, Craig T1 - Spatiotemporal changes, faulting regimes, and source parameters of induced seismicity: A case study from the Geysers geothermal field JF - Journal of geophysical research : Solid earth N2 - The spatiotemporal, kinematic, and source characteristics of induced seismicity occurring at different fluid injection rates are investigated to determine the predominant physical mechanisms responsible for induced seismicity at the northwestern part of The Geysers geothermal field, California. We analyze a relocated hypocenter catalog from a seismicity cluster where significant variations of the stress tensor orientation were previously observed to correlate with injection rates. We find that these stress tensor orientation changes may be related to increased pore pressure and the corresponding changes in poroelastic stresses at reservoir depth. Seismic events during peak injections tend to occur at greater distances from the injection well, preferentially trending parallel to the maximum horizontal stress direction. In contrast, at lower injection rates the seismicity tends to align in a different direction which suggests the presence of a local fault. During peak injection intervals, the relative contribution of strike-slip faulting mechanisms increases. Furthermore, increases in fluid injection rates also coincide with a decrease in b values. Our observations suggest that regardless of the injection stage, most of the induced seismicity results from thermal fracturing of the reservoir rock. However, during peak injection intervals, the increase in pore pressure may likewise be responsible for the induced seismicity. By estimating the thermal and hydraulic diffusivities of the reservoir, we confirm that the characteristic diffusion length for pore pressure is much greater than the corresponding length scale for temperature and also more consistent with the spatial extent of seismicity observed during different injection rates. KW - thermal effect KW - focal mechanisms KW - geothermal KW - pore pressure KW - fluid-induced seismicity KW - reservoir characterization Y1 - 2014 U6 - https://doi.org/10.1002/2014JB011385 SN - 2169-9313 SN - 2169-9356 VL - 119 IS - 11 SP - 8378 EP - 8396 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Korup, Oliver A1 - Hayakawa, Yuichi A1 - Codilean, Alexandru T. A1 - Matsushi, Yuki A1 - Saito, Hitoshi A1 - Oguchi, Takashi A1 - Matsuzaki, Hiroyuki T1 - Japan's sediment flux to the Pacific Ocean revisited JF - Earth science reviews : the international geological journal bridging the gap between research articles and textbooks N2 - Quantifying volumes and rates of delivery of terrestrial sediment from island arcs to subduction zones is indispensable for refining estimates of the thickness of trench fills that may eventually control the location and timing of submarine landslides and tsunami-generating mega-earthquakes. Despite these motivating insights, knowledge about the rates of erosion and sediment export from the Japanese islands to their Pacific subduction zones remains patchy regardless of the increasing availability of highly resolved data on surface deformation, climate, geology, and topography. Traditionally, natural erosion rates across the island arc have been estimated from regression of topographic catchment metrics and reservoir sedimentation rates that were recorded over several years to decades. We review current research in this context, correct for a systematic bias in one of the most widely used predictions, and present new estimates of decadal to millennial-scale erosion rates of Japan's terrestrial inner forearc. We draw on several independent and unprecedented inventories of mass wasting, reservoir sedimentation, and concentrations of cosmogenic Be-10 in river sands. We find that natural Be-10-derived denudation rates of several mm yr(-1) in the Japanese Alps have been sustained over several centuries to millennia, and are, within error, roughly consistent with sediment yields inferred from artificial reservoir sedimentation. Local exceptions may likely result from release of sediment storage or regional landsliding episodes that trigger transient sediment pulses. Our synopsis further reveals that catchments draining Japan's eastern seaboard differ distinctly in their tectonic, lithological, topographic, and climatic characteristics between the Tohoku, Japanese Alps, and Nankai inner forearc segments, which is underscored by a marked asymmetric pattern of erosion rates along the island arc. Erosion rates are highest (up to at least 3 mm yr(-1)) in the Japanese Alps that mark the collision of two subduction zones, where high topographic relief, hillslope and bedrock-channel steepness foster rapid denudation by mass wasting. Comparable, if slightly lower, erosion rates characterise the Nankai inner forearc in southwest Japan, most likely due to higher typhoon-driven rainfall totals and variability rather than its high topographic relief. In contrast, our estimated erosion and flux rates are lowest in the Tohoku inner forearc catchments that feed sediment into the Japan Trench. We conclude that collisional mountain building of the Japanese Alps drives some of the highest erosion rates in the island arc despite similar uplift and precipitation controls in southwest Japan. We infer that, prior to extensive river damming, reservoir construction, and coastal works, the gross of Japan's total sediment export to the Pacific Ocean entered the accretionary margin of the Nankai Trough as opposed to the comparatively sediment-starved Japan Trench. Compared to documented contemporary rates of sediment flux from mountainous catchments elsewhere in the Pacific, the rivers draining Japan's inner forearc take an intermediate position despite high relief, steep slopes, very high seismicity, and frequent rainstorms. However, the average rates of millennial-scale denudation in the Japanese Alps particularly are amongst the highest reported worldwide. Local mismatches between these late Holocene and modern rates emphasise the anthropogenic fingerprint on sediment retention that may have significantly reduced the island arc's mass flux to its subduction zones, as is the case elsewhere in east and southeast Asia. (C) 2014 Elsevier B.V. All rights reserved. KW - Erosion KW - Japan KW - Subduction zone KW - Landslides KW - Cosmogenic nuclides KW - Sediment budget Y1 - 2014 U6 - https://doi.org/10.1016/j.earscirev.2014.03.004 SN - 0012-8252 SN - 1872-6828 VL - 135 SP - 1 EP - 16 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bloethe, Jan H. A1 - Munack, Henry A1 - Korup, Oliver A1 - Fuelling, Alexander A1 - Garzanti, Eduardo A1 - Resentini, Alberto A1 - Kubik, Peter W. T1 - Late Quaternary valley infill and dissection in the Indus River, western Tibetan Plateau margin JF - Quaternary science reviews : the international multidisciplinary research and review journal N2 - The Indus, one of Earth's major rivers, drains large parts of the NW Himalaya and the Transhimalayan ranges that form part of the western Tibetan Plateau margin. In the western Himalayan syntaxis, where local topographic relief exceeds 7 km, the Indus has incised a steep bedrock gorge at rates of several mm yr(-1). Upstream, however, the upper Indus and its tributaries alternate between bedrock gorges and broad alluvial flats flanked by the Ladakh and Zanskar ranges. We review the late Quaternary valley history in this region with a focus on the confluence of the Indus and Zanskar Rivers, where vast alluvial terrace staircases and lake sediments record major episodes of aggradation and incision. New absolute dating of high-level fluvial terrace remnants using cosmogenic Be-10, optically and infrared stimulated luminescence (OSL, IRSL) indicates at least two phases of late Quaternary valley infilling. These phases commenced before similar to 200 ka and similar to 50-20 ka, judging from terrace treads stranded >150 m and similar to 30-40 m above modern river levels, respectively. Numerous stacks of lacustrine sediments that straddle the Indus River >200 km between the city of Leh and the confluence with the Shyok River share a distinct horizontal alignment. Constraints from IRSL samples of lacustrine sequences from the Leh-Spituk area reveal a protracted lake phase from >177 ka to 72 ka, locally accumulating >50-m thick deposits. In the absence of tectonic faulting, major lithological differences, and stream capture, we attribute the formation of this and other large lakes in the region to natural damming by large landslides, glaciers, and alluvial fans. The overall patchy landform age constraints from earlier studies can be reconciled by postulating a major deglacial control on sediment flux, valley infilling, and subsequent incision that has been modulated locally by backwater effects of natural damming. While comparison with Pleistocene monsoon proxies reveals no obvious correlation, a lateor post-glacial sediment pulse seems a more likely source of this widespread sedimentation that has partly buried the dissected bedrock topography. Overall, the long residence times of fluvial, alluvial and lacustrine deposits in the region (>500 ka) support previous studies, but remain striking given the dominantly steep slopes and deeply carved valleys that characterise this high-altitude mountain desert. Recalculated late Quaternary rates of fluvial bedrock incision in the Indus and Zanskar of 1.5 +/- 0.2 mm yr(-1) are at odds with the longevity of juxtaposed valley-fill deposits, unless a lack of decisive lateral fluvial erosion helps to preserve these late Pleistocene sedimentary archives. We conclude that alternating, similar to 10(4)-yr long, phases of massive infilling and incision have dominated the late Quaternary history of the Indus valley below the western Tibetan Plateau margin. (C) 2014 Elsevier Ltd. All rights reserved. KW - Himalaya KW - Indus KW - Valley fills KW - Glaciation KW - Erosion KW - Lake sediment Y1 - 2014 U6 - https://doi.org/10.1016/j.quascirev.2014.04.011 SN - 0277-3791 VL - 94 SP - 102 EP - 119 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Gorum, Tolga A1 - Korup, Oliver A1 - van Westen, Cees J. A1 - van der Meijde, Mark A1 - Xu, Chong A1 - van der Meer, Freek D. T1 - Why so few? Landslides triggered by the 2002 Denali earthquake, Alaska JF - Quaternary science reviews : the international multidisciplinary research and review journal N2 - The 2002 M-w 7.9 Denali Fault earthquake, Alaska, provides an unparalleled opportunity to investigate in quantitative detail the regional hillslope mass-wasting response to strong seismic shaking in glacierized terrain. We present the first detailed inventory of similar to 1580 coseismic slope failures, out of which some 20% occurred above large valley glaciers, based on mapping from multi-temporal remote sensing data. We find that the Denali earthquake produced at least one order of magnitude fewer landslides in a much narrower corridor along the fault ruptures than empirical predictions for an M 8 earthquake would suggest, despite the availability of sufficiently steep and dissected mountainous topography prone to frequent slope failure. In order to explore potential controls on the reduced extent of regional coseismic landsliding we compare our data with inventories that we compiled for two recent earthquakes in periglacial and formerly glaciated terrain, i.e. at Yushu, Tibet (M-w 6.9, 2010), and Aysen Fjord, Chile (2007 M-w 6.2). Fault movement during these events was, similarly to that of the Denali earthquake, dominated by strike-slip offsets along near-vertical faults. Our comparison returns very similar coseismic landslide patterns that are consistent with the idea that fault type, geometry, and dynamic rupture process rather than widespread glacier cover were among the first-order controls on regional hillslope erosional response in these earthquakes. We conclude that estimating the amount of coseismic hillslope sediment input to the sediment cascade from earthquake magnitude alone remains highly problematic, particularly if glacierized terrain is involved. (C) 2014 Elsevier Ltd. All rights reserved. KW - Earthquake KW - Landslide KW - Glacial KW - Sediment cascade KW - Denali KW - Alaska Y1 - 2014 U6 - https://doi.org/10.1016/j.quascirev.2014.04.032 SN - 0277-3791 VL - 95 SP - 80 EP - 94 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Saito, H. A1 - Korup, Oliver A1 - Uchida, T. A1 - Hayashi, S. A1 - Oguchi, T. T1 - Rainfall conditions, typhoon frequency, and contemporary landslide erosion in Japan JF - Geology N2 - Dealing with predicted increases in extreme weather conditions due to climate change requires robust knowledge about controls on rainfall-triggered landslides. We explore relationships between rainfall and landslide size throughout the Japanese archipelago. We test whether the total volume of landslides can be predicted directly from rainfall totals, intensity, and duration using a nationwide inventory of 4744 rainfall-triggered landslides recorded from A.D. 2001 to 2011. We find that larger landslides were more abundant at the expense of smaller ones when total, maximum, and mean rainfall intensity exceeded similar to 250 mm, similar to 35 mm/h, and similar to 4 mm/h, respectively. Frequency distributions of these rainfall parameters are peaked and heavily skewed. Yet neither the most frequent nor the most extreme values of these rainfall metrics coincide consistently with the maximum landslide volumes. A striking decrease of landslide volumes at both mean and maximum rainfall intensity, as well as duration, points to an exhaustion in hillslope geomorphic response regardless of sample size, landslide type, mobilized volume, dominant lithology, or reporting bias. Our results underscore substantial offsets between the peaks of rainfall metrics and maximum associated landslide volumes, thus complicating straightforward estimates of geomorphic work from metrics of rainstorm magnitude or frequency. Only the rainfall total appears to be a suitable monotonic predictor of landslide volumes mobilized during typhoons and frontal storms. Y1 - 2014 U6 - https://doi.org/10.1130/G35680.1 SN - 0091-7613 SN - 1943-2682 VL - 42 IS - 11 SP - 999 EP - 1002 PB - American Institute of Physics CY - Boulder ER - TY - JOUR A1 - Weidinger, Johannes T. A1 - Korup, Oliver A1 - Munack, Henry A1 - Altenberger, Uwe A1 - Dunning, Stuart A. A1 - Tippelt, Gerold A1 - Lottermoser, Werner T1 - Giant rockslides from the inside JF - Earth & planetary science letters N2 - The growing body of research on large-scale mass wasting events so far has only scarcely investigated the sedimentology of chaotic deposits from non-volcanic terrestrial landslides such that any overarching and systematic terminological framework remains elusive. Yet recent work has emphasized the need for better understanding the internal structure and composition of rockslide deposits as a means to characterise the mechanics during the final stages of runout and emplacement. We offer a comprehensive overview on the occurrence of rock fragmentation and frictional melt both at different geographic locations, and different sections within large (>10(6) m(3)) rockslide masses. We argue that exposures of pervasively fragmented and interlocked jigsaw-cracked rock masses; basal melange containing rip-up clasts and phantom blocks; micro-breccia; and thin bands of basal frictionite are indispensable clues for identifying deposits from giant rockslides that may remain morphologically inconspicuous otherwise. These sedimentary assemblages are diagnostic tools for distinguishing large rockslide debris from macro and microscopically similar glacial deposits, tectonic fault-zone breccias, and impact breccias, and thus help avoid palaeoclimatic and tectonic misinterpretations, let alone misestimates of the hazard from giant rockslides. Moreover, experimental results from Mossbauer spectroscopy of frictionite samples support visual interpretations of thin sections, and demonstrate that short-lived (<10 s) friction-induced partial melting at temperatures >1500 degrees C in the absence of water occurred at the base of several giant moving rockslides. This finding supports previous theories of dry excess runout accompanied by comminution of rock masses down to gm-scale, and indicates that catastrophic motion of large fragmenting rock masses does not require water as a potential lubricant. KW - landslide KW - petrography KW - frictional melt KW - pseudotachylyte KW - breccia KW - Mossbauer spectroscopy Y1 - 2014 U6 - https://doi.org/10.1016/j.epsl.2013.12.017 SN - 0012-821X SN - 1385-013X VL - 389 SP - 62 EP - 73 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Meyer, Nele Kristin A1 - Schwanghart, Wolfgang A1 - Korup, Oliver A1 - Romstad, Bard A1 - Etzelmuller, Bernd T1 - Estimating the topographic predictability of debris flows JF - Geomorphology : an international journal on pure and applied geomorphology N2 - The Norwegian traffic network is impacted by about 2000 landslides, avalanches, and debris flows each year that incur high economic losses. Despite the urgent need to mitigate future losses, efforts to locate potential debris flow source areas have been rare at the regional scale. We tackle this research gap by exploring a minimal set of possible topographic predictors of debris flow initiation that we input to a Weights-of-Evidence (WofE) model for mapping the regional susceptibility to debris flows in western Norway. We use an inventory of 429 debris flows that were recorded between 1979 and 2008, and use the terrain variables of slope, total curvature, and contributing area (flow accumulation) to compute the posterior probabilities of local debris flow occurrence. The novelty of our approach is that we quantify the uncertainties in the WofE approach arising from different predictor classification schemes and data input, while estimating model accuracy and predictive performance from independent test data. Our results show that a percentile-based classification scheme excels over a manual classification of the predictor variables because differing abundances in manually defined bins reduce the reliability of the conditional independence tests, a key, and often neglected, prerequisite for the WofE method. The conditional dependence between total curvature and flow accumulation precludes their joint use in the model. Slope gradient has the highest true positive rate (88%), although the fraction of area classified as susceptible is very large (37%). The predictive performance, i.e. the reduction of false positives, is improved when combined with either total curvature or flow accumulation. Bootstrapping shows that the combination of slope and flow accumulation provides more reliable predictions than the combination of slope and total curvature, and helps refining the use of slope-area plots for identifying morphometric fingerprints of debris flow source areas, an approach used outside the field of landslide susceptibility assessments. KW - Weights-of-Evidence KW - Debris flows KW - Susceptibility KW - Slope-area plot KW - Process domains KW - Norway Y1 - 2014 U6 - https://doi.org/10.1016/j.geomorph.2013.10.030 SN - 0169-555X SN - 1872-695X VL - 207 SP - 114 EP - 125 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Korup, Oliver A1 - Rixen, C. T1 - Soil erosion and organic carbon export by wet snow avalanches JF - The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union N2 - Many mountain belts sustain prolonged snow cover for parts of the year, although enquiries into rates of erosion in these landscapes have focused almost exclusively on the snow-free periods. This raises the question of whether annual snow cover contributes significantly to modulating rates of erosion in high-relief terrain. In this context, the sudden release of snow avalanches is a frequent and potentially relevant process, judging from the physical damage to subalpine forest ecosystems, and the amount of debris contained in avalanche deposits. To quantitatively constrain this visual impression and to expand the sparse literature, we sampled sediment concentrations of n = 28 river-spanning snow-avalanche deposits (snow bridges) in the area around Davos, eastern Swiss Alps, and inferred an orders-of-magnitude variability in specific fine sediment and organic carbon yields (1.8 to 830 t km(-2) yr(-1), and 0.04 to 131 tC km(-2) yr(-1), respectively). A Monte Carlo simulation demonstrates that, with a minimum of free parameters, such variability is inherent to the geometric scaling used for computing specific yields. Moreover, the widely applied method of linearly extrapolating plot scale sample data may be prone to substantial under- or overestimates. A comparison of our inferred yields with previously published work demonstrates the relevance of wet snow avalanches as prominent agents of soil erosion and transporters of biogeochemical constituents to mountain rivers. Given that a number of snow bridges persisted below the insulating debris cover well into the summer months, snow-avalanche deposits also contribute to regulating in-channel sediment and organic debris storage on seasonal timescales. Finally, our results underline the potential shortcomings of neglecting erosional processes in the winter and spring months in mountainous terrain subjected to prominent snow cover. Y1 - 2014 U6 - https://doi.org/10.5194/tc-8-651-2014 SN - 1994-0416 SN - 1994-0424 VL - 8 IS - 2 SP - 651 EP - 658 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Vogel, Kristin A1 - Riggelsen, Carsten A1 - Korup, Oliver A1 - Scherbaum, Frank T1 - Bayesian network learning for natural hazard analyses JF - Natural hazards and earth system sciences N2 - Modern natural hazards research requires dealing with several uncertainties that arise from limited process knowledge, measurement errors, censored and incomplete observations, and the intrinsic randomness of the governing processes. Nevertheless, deterministic analyses are still widely used in quantitative hazard assessments despite the pitfall of misestimating the hazard and any ensuing risks. In this paper we show that Bayesian networks offer a flexible framework for capturing and expressing a broad range of uncertainties encountered in natural hazard assessments. Although Bayesian networks are well studied in theory, their application to real-world data is far from straightforward, and requires specific tailoring and adaptation of existing algorithms. We offer suggestions as how to tackle frequently arising problems in this context and mainly concentrate on the handling of continuous variables, incomplete data sets, and the interaction of both. By way of three case studies from earthquake, flood, and landslide research, we demonstrate the method of data-driven Bayesian network learning, and showcase the flexibility, applicability, and benefits of this approach. Our results offer fresh and partly counterintuitive insights into well-studied multivariate problems of earthquake-induced ground motion prediction, accurate flood damage quantification, and spatially explicit landslide prediction at the regional scale. In particular, we highlight how Bayesian networks help to express information flow and independence assumptions between candidate predictors. Such knowledge is pivotal in providing scientists and decision makers with well-informed strategies for selecting adequate predictor variables for quantitative natural hazard assessments. Y1 - 2014 U6 - https://doi.org/10.5194/nhess-14-2605-2014 SN - 1561-8633 VL - 14 IS - 9 SP - 2605 EP - 2626 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Munack, Henry A1 - Korup, Oliver A1 - Resentini, Alberto A1 - Limonta, Mara A1 - Garzanti, Eduardo A1 - Bloethe, Jan H. A1 - Scherler, Dirk A1 - Wittmann, Hella A1 - Kubik, Peter W. T1 - Postglacial denudation of western Tibetan Plateau margin outpaced by long-term exhumation JF - Geological Society of America bulletin N2 - The Indus River, one of Asia's premier rivers, drains the western Tibetan Plateau and the Nanga Parbat syntaxis. These two areas juxtapose some of the lowest and highest topographic relief and commensurate denudation rates in the Himalaya-Tibet orogen, respectively, yet the spatial pattern of denudation rates upstream of the syntaxis remains largely unclear, as does the way in which major rivers drive headward incision into the Tibetan Plateau. We report a new inventory of Be-10-based basinwide denudation rates from 33 tributaries flanking the Indus River along a 320 km reach across the western Tibetan Plateau margin. We find that denudation rates of up to 110 mm k.y.(-1) in the Ladakh and Zanskar Ranges systematically decrease eastward to 10 mm k.y.(-1) toward the Tibetan Plateau. Independent results from bulk petrographic and heavy mineral analyses support this denudation gradient. Assuming that incision along the Indus exerts the base-level control on tributary denudation rates, our data show a systematic eastward decrease of landscape downwearing, reaching its minimum on the Tibetan Plateau. In contrast, denudation rates increase rapidly 150-200 km downstream of a distinct knick-point that marks the Tibetan Plateau margin in the Indus River longitudinal profile. We infer that any vigorous headward incision and any accompanying erosional waves into the interior of the plateau mostly concerned reaches well below this plateau margin. Moreover, reported long-term (>10(6) yr) exhumation rates from low-temperature chronometry of 0.1-0.75 mm yr(-1) consistently exceed our Be-10-derived denudation rates. With averaging time scales of 10(3)-10(4) yr for our denudation data, we report postglacial rates of downwearing in a tectonically idle landscape. To counterbalance this apparent mismatch, denudation rates must have been higher in the Quaternary during glacial-interglacial intervals. Y1 - 2014 U6 - https://doi.org/10.1130/B30979.1 SN - 0016-7606 SN - 1943-2674 VL - 126 IS - 11-12 SP - 1580 EP - 1594 PB - American Institute of Physics CY - Boulder ER -