TY  - JOUR
A1  - Mishurova, Tatiana
A1  - Cabeza, Sandra
A1  - Thiede, Tobias
A1  - Nadammal, Naresh
A1  - Kromm, Arne
A1  - Klaus, Manuela
A1  - Genzel, Christoph
A1  - Haberland, Christoph
A1  - Bruno, Giovanni
T1  - The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts
JF  - Metallurgical and Materials Transactions A
N2  - The effect of support structure and of removal from the base plate on the residual stress state in selective laser melted IN718 parts was studied by means of synchrotron X-ray diffraction. The residual stresses in subsurface region of two elongated prisms in as-built condition and after removal from the base plate were determined. One sample was directly built on a base plate and another one on a support structure. Also, the distortion on the top surface due to stress release was measured by contact profilometry. High tensile residual stress values were found, with pronounced stress gradient along the hatching direction. In the sample on support, stress redistribution took place after removal from the base plate, as opposed to simple stress relaxation for the sample without support. The sample on support structure showed larger distortion compared to sample without support. We conclude that the use of a support decreases stress values but stress-relieving heat treatments are still needed.
Y1  - 2018
U6  - https://doi.org/10.1007/s11661-018-4653-9
SN  - 1073-5623
SN  - 1543-1940
VL  - 49A
IS  - 7
SP  - 3038
EP  - 3046
PB  - Springer
CY  - New York
ER  - 
TY  - JOUR
A1  - Sun, Fu
A1  - Dong, Kang
A1  - Osenberg, Markus
A1  - Hilger, Andre
A1  - Risse, Sebastian
A1  - Lu, Yan
A1  - Kamm, Paul H.
A1  - Klaus, Manuela
A1  - Markoetter, Henning
A1  - Garcia-Moreno, Francisco
A1  - Arlt, Tobias
A1  - Manke, Ingo
T1  - Visualizing the morphological and compositional evolution of the interface of InLi-anode|thio-LISION electrolyte in an all-solid-state Li-S cell by in operando synchrotron X-ray tomography and energy dispersive diffraction
JF  - Journal of materials chemistry : A, Materials for energy and sustainability
N2  - Dynamic and direct visualization of interfacial evolution is helpful in gaining fundamental knowledge of all-solid-state-lithium battery working/degradation mechanisms and clarifying future research directions for constructing next-generation batteries. Herein, in situ and in operando synchrotron X-ray tomography and energy dispersive diffraction were simultaneously employed to record the morphological and compositional evolution of the interface of InLi-anode|sulfide-solid-electrolyte during battery cycling. Compelling morphological evidence of interfacial degradation during all-solid-state-lithium battery operation has been directly visualized by tomographic measurement. The accompanying energy dispersive diffraction results agree well with the observed morphological deterioration and the recorded electrochemical performance. It is concluded from the current investigation that a fundamental understanding of the phenomena occurring at the solid-solid electrode|electrolyte interface during all-solid-state-lithium battery cycling is critical for future progress in cell performance improvement and may determine its final commercial viability.
Y1  - 2018
U6  - https://doi.org/10.1039/c8ta08821g
SN  - 2050-7488
SN  - 2050-7496
VL  - 6
IS  - 45
SP  - 22489
EP  - 22496
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  -