TY - JOUR A1 - Abbas, Ioana M. A1 - Vranic, Marija A1 - Hoffmann, Holger A1 - El-Khatib, Ahmed H. A1 - Montes-Bayón, María A1 - Möller, Heiko Michael A1 - Weller, Michael G. T1 - Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺ JF - International Journal of Molecular Sciences N2 - Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others. KW - hepcidin-25 KW - copper KW - nickel KW - copper complex KW - ATCUN motif KW - metal complex KW - MS KW - NMR structure KW - metal peptide KW - metalloprotein KW - metallopeptide KW - isomerization KW - racemization KW - purity KW - reference material Y1 - 2018 U6 - https://doi.org/10.3390/ijms19082271 SN - 1422-0067 SN - 1661-6596 VL - 19 IS - 8 PB - Molecular Diversity Preservation International CY - Basel ER - TY - GEN A1 - Abbas, Ioana M. A1 - Vranic, Marija A1 - Hoffmann, Holger A1 - El-Khatib, Ahmed H. A1 - Montes-Bayón, María A1 - Möller, Heiko Michael A1 - Weller, Michael G. T1 - Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺ T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 701 KW - hepcidin-25 KW - copper KW - nickel KW - copper complex KW - ATCUN motif KW - metal complex KW - MS KW - NMR structure KW - metal peptide KW - metalloprotein KW - metallopeptide KW - isomerization KW - racemization KW - purity KW - reference material Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427926 SN - 1866-8372 IS - 701 ER - TY - JOUR A1 - Abbasi, Ali A1 - Xu, Yaolin A1 - Khezri, Ramin A1 - Etesami, Mohammad A1 - Lin, C. A1 - Kheawhom, Soorathep A1 - Lu, Yan T1 - Advances in characteristics improvement of polymeric membranes/separators for zinc-air batteries JF - Materials Today Sustainability N2 - Zinc-air batteries (ZABs) are gaining popularity for a wide range of applications due to their high energy density, excellent safety, and environmental friendliness. A membrane/separator is a critical component of ZABs, with substantial implications for battery performance and stability, particularly in the case of a battery in solid state format, which has captured increased attention in recent years. In this review, recent advances as well as insight into the architecture of polymeric membrane/separators for ZABs including porous polymer separators (PPSs), gel polymer electrolytes (GPEs), solid polymer electrolytes (SPEs) and anion exchange membranes (AEMs) are discussed. The paper puts forward strategies to enhance stability, ionic conductivity, ionic selectivity, electrolyte storage capacity and mechanical properties for each type of polymeric membrane. In addition, the remaining major obstacles as well as the most potential avenues for future research are examined in detail. KW - Ionic selectivity KW - Ionic conductivity KW - Gel polymer KW - Ion exchange KW - Porous KW - polymer Y1 - 2022 U6 - https://doi.org/10.1016/j.mtsust.2022.100126 SN - 2589-2347 VL - 18 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Abdissa, Negera A1 - Heydenreich, Matthias A1 - Midiwo, Jacob O. A1 - Ndakala, Albert A1 - Majer, Zsuzsanna A1 - Neumann, Beate A1 - Stammler, Hans-Georg A1 - Sewald, Norbert A1 - Yenesew, Abiy T1 - A xanthone and a phenylanthraquinone from the roots of Bulbine frutescens, and the revision of six seco-anthraquinones into xanthones JF - Phytochemistry letters N2 - Phytochemical investigation of the dichloromethane/methanol (1:1) extract of the roots of Bulbine frutescens led to the isolation of a new xanthone, 8-hydroxy-6-methylxanthone-1-carboxylic acid (1) and a new phenylanthraquinone, 6',8-O-dimethylknipholone (2) along with six known compounds. The structures were elucidated on the basis of NMR and MS spectral data analyses. The structure of compound 1 was confirmed through X-ray crystallography which was then used as a reference to propose the revision of the structures of six seco-anthraquinones into xanthones. The isolated compounds were evaluated for cytotoxicity against human cervix carcinoma KB-3-1 cells with the phenylanthraquinone knipholone being the most active (IC50 = 0.43 mu M). Two semi-synthetic knipholone derivatives, knipholone Mannich base and knipholone-1,3-oxazine, were prepared and tested for cytotoxic activity; both showed moderate activities (IC50 value of 1.89 and 2.50 mu M, respectively). (C) 2014 Phytochemical Society of Europe. Published by Elsevier B.V. All rights reserved. KW - Bulbine frutescens KW - Xanthone KW - seco-Anthraquinone KW - Phenylanthraquinone KW - Cytotoxicity KW - Structure revision Y1 - 2014 U6 - https://doi.org/10.1016/j.phytol.2014.04.004 SN - 1874-3900 SN - 1876-7486 VL - 9 SP - 67 EP - 73 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Abdissa, Negera A1 - Induli, Martha A1 - Akala, Hoseah M. A1 - Heydenreich, Matthias A1 - Midiwo, Jacob O. A1 - Ndakala, Albert A1 - Yenesew, Abiy T1 - Knipholone cyclooxanthrone and an anthraquinone dimer with antiplasmodial activities from the roots of Kniphofia foliosa JF - Phytochemistry letters N2 - A new phenylanthrone, named knipholone cyclooxanthrone and a dimeric anthraquinone, 10-methoxy-10,7'-(chrysophanol anthrone)-chrysophanol were isolated from the roots of Kniphofia foliosa together with the rare naphthalene glycoside, dianellin. The structures were determined by NMR and mass spectroscopic techniques. The compounds showed antiplasmodial activities against the chloroquine-resistant (W2) and chloroquine-sensitive (D6) strains of Plasmodium falciparum with 10-methoxy-10,7'-(chrysophanol anthrone)-chrysophanol being the most active with IC50 values of 1.17 +/- 0.12 and 4.07 +/- 1.54 mu g/ml, respectively. KW - Kniphofia foliosa KW - Asphodelaceae KW - Roots KW - Anthraquinone KW - Knipholone cyclooxanthrone KW - 10-Methoxy-10,7 '-(chrysophanol anthrone)-chrysophanol KW - Dianellin KW - Malaria Y1 - 2013 U6 - https://doi.org/10.1016/j.phytol.2013.02.005 SN - 1874-3900 VL - 6 IS - 2 SP - 241 EP - 245 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Abdou, Nicole A1 - Alonso, Bruno A1 - Brun, Nicolas A1 - Landois, Perine A1 - Taubert, Andreas A1 - Hesemann, Peter A1 - Mehdi, Ahmad T1 - Ionic guest in ionic host BT - ionosilica ionogel composites via ionic liquid confinement in ionosilica supports JF - Materials chemistry frontiers N2 - Ionosilica ionogels, i.e. composites consisting of an ionic liquid (IL) guest confined in an ionosilica host matrix, were synthesized via a non-hydrolytic sol-gel procedure from a tris-trialcoxysilylated amine precursor using the IL [BMIM]NTf2 as solvent. Various ionosilica ionogels were prepared starting from variable volumes of IL in the presence of formic acid. The resulting brittle and nearly colourless monoliths are composed of different amounts of IL guests confined in an ionosilica host as evidenced via thermogravimetric analysis, FT-IR, and C-13 CP-MAS solid-state NMR spectroscopy. In the following, we focused on confinement effects between the ionic host and guest. Special host-guest interactions between the IL guest and the ionosilica host were evidenced by H-1 solid-state NMR, Raman spectroscopy, and broadband dielectric spectroscopy (BDS) measurements. The three techniques indicate a strongly reduced ion mobility in the ionosilica ionogel composites containing small volume fractions of confined IL, compared to conventional silica-based ionogels. We conclude that the ionic ionosilica host stabilizes an IL layer on the host surface; this then results in a strongly reduced ion mobility compared to conventional silica hosts. The ion mobility progressively increases for systems containing higher volume fractions of IL and finally reaches the values observed in conventional silica based ionogels. These results therefore point towards strong interactions and confinement effects between the ionic host and the ionic guest on the ionosilica surface. Furthermore, this approach allows confining high volume fractions of IL into self-standing monoliths while preserving high ionic conductivity. These effects may be of interest in domains where IL phases must be anchored on solid supports to avoid leaching or IL spilling, e.g., in catalysis, in gas separation/sequestration devices or for the elaboration of solid electrolytes for (lithium-ion) batteries and supercapacitors. Y1 - 2022 U6 - https://doi.org/10.1039/d2qm00021k SN - 2052-1537 VL - 6 IS - 7 SP - 939 EP - 947 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Abegaz, Berhanu M. A1 - Peter, Martin G. T1 - Emodine and emodinanthrone rhamnoside acetates from fruits of rhamnus prinoides Y1 - 1995 SN - 0031-9422 ER - TY - THES A1 - Abouserie, Ahed T1 - Ionic liquid precursors for multicomponent inorganic nanomaterials T1 - Ionische Flüssigkeiten als Vorstufe für anorganische Mehrkomponenten-Nanomaterialien N2 - Health effects, attributed to the environmental pollution resulted from using solvents such as benzene, are relatively unexplored among petroleum workers, personal use, and laboratory researchers. Solvents can cause various health problems, such as neurotoxicity, immunotoxicity, and carcinogenicity. As such it can be absorbed via epidermal or respiratory into the human body resulting in interacting with molecules that are responsible for biochemical and physiological processes of the brain. Owing to the ever-growing demand for finding a solution, an Ionic liquid can use as an alternative solvent. Ionic liquids are salts in a liquid state at low temperature (below 100 C), or even at room temperature. Ionic liquids impart a unique architectural platform, which has been interesting because of their unusual properties that can be tuned by simple ways such as mixing two ionic liquids. Ionic liquids not only used as reaction solvents but they became a key developing for novel applications based on their thermal stability, electric conductivity with very low vapor pressure in contrast to the conventional solvents. In this study, ionic liquids were used as a solvent and reactant at the same time for the novel nanomaterials synthesis for different applications including solar cells, gas sensors, and water splitting. The field of ionic liquids continues to grow, and become one of the most important branches of science. It appears to be at a point where research and industry can work together in a new way of thinking for green chemistry and sustainable production. N2 - Der Einfluss von kommerziellen organischen Lösungsmitteln auf den menschlichen Körper ist bekannt, jedoch nicht ausreichend untersucht worden. Spezielle Lösungsmittel wie Benzol, welche auch vermehrt in der Petrolchemie genutzt werden, zeigen akute Toxizität auf den biologischen Organismus. Daher ist der Bedarf der Verwendung eines alternativen Lösungsmittel groß. Ionische Flüssigkeiten können hier potentiell eine Alternative sein. Als Ionische Flüssigkeiten (ILs) werden Salze in flüssigem Zustand bei niedriger Temperatur (unter 100 °C) oder sogar bei Raumtemperatur definiert. Aufgrund ihrer Variabilität in der Zusammensetzung der strukturellen ionischen Moleküle ergeben sich ungewöhnliche Eigenschaften, welche auf einfachste Weise durch Mischen zweier ionischer Flüssigkeiten beliebig angepasst werden können. ILs werden sowohl als gewöhnliche Lösungsmittel verwendet, jedoch entwickelten sie sich aufgrund ihrer besonderen Eigenschaften vermehrt zu Reaktionsagenzien. Dies ist zurückzuführen auf ihre gute thermische Stabilität, elektrische Leitfähigkeit und ihrem geringen Dampfdruck. In dieser Arbeit wurden nun spezielle Ionische Flüssigkeiten speziell auf ihr Verhalten in chemischen Reaktionen als Reagenz untersucht. Als Ausgangsreaktion diente hierbei eine neuartige Synthese von Nanomaterialen, welche speziell in Solarzellen, Gassensoren und auch in der katalytischen Wasserspaltung genutzt werden. Das Anwendungspotenzial der ILs gewinnt immer mehr an Bedeutung und führt in der Forschung sowie auch in der Industrie zu neuen Denkweisen für nachhaltige Produktionen und auch Entwicklungen. KW - ionic liquids KW - Alkylpyridinium salts KW - Structure elucidation KW - Phase transitions KW - Nanoparticles KW - Metal Chalcogenides KW - Organic photovoltaic Cell KW - Ionische Flüssigkeiten KW - Alkylpyridinium-Salze KW - Strukturaufklärung KW - Phasenübergänge KW - Nanopartikel KW - Metallchalkogenide KW - Organische Photovoltaikzelle Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418950 ER - TY - JOUR A1 - Abouserie, Ahed A1 - Zehbe, Kerstin A1 - Metzner, Philipp A1 - Kelling, Alexandra A1 - Günter, Christina A1 - Schilde, Uwe A1 - Strauch, Peter A1 - Körzdörfer, Thomas A1 - Taubert, Andreas T1 - Alkylpyridinium Tetrahalidometallate Ionic Liquids and Ionic Liquid Crystals: Insights into the Origin of Their Phase Behavior JF - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - Six N-alkylpyridinium salts [CnPy](2)[MCl4] (n = 4 or 12 and M = Co, Cu, Zn) were synthesized, and their structure and thermal properties were studied. The [C4Py](2)[MCl4] compounds are monoclinic and crystallize in the space group P2(1)/n. The crystals of the longer chain analogues [C12Py](2)[MCl4] are triclinic and crystallize in the space group P (1) over bar. Above the melting temperature, all compounds are ionic liquids (ILs). The derivatives with the longer C12 chain exhibit liquid crystallinity and the shorter chain compounds only show a melting transition. Consistent with single-crystal analysis, electron paramagnetic resonance spectroscopy suggests that the [CuCl4](2-) ions in the Cu-based ILs have a distorted tetrahedral geometry. KW - Ionic liquids KW - Alkylpyridinium salts KW - Structure elucidation KW - Phase transitions Y1 - 2017 U6 - https://doi.org/10.1002/ejic.201700826 SN - 1434-1948 SN - 1099-0682 SP - 5640 EP - 5649 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Abouserie, Ahed A1 - Zehbe, Kerstin A1 - Metzner, Philipp A1 - Kelling, Alexandra A1 - Günter, Christina A1 - Schilde, Uwe A1 - Strauch, Peter A1 - Körzdörfer, Thomas A1 - Taubert, Andreas T1 - Alkylpyridinium Tetrahalidometallate Ionic Liquids and Ionic Liquid Crystals: Insights into the Origin of Their Phase Behavior JF - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - Six N-alkylpyridinium salts [CnPy](2)[MCl4] (n = 4 or 12 and M = Co, Cu, Zn) were synthesized, and their structure and thermal properties were studied. The [C4Py](2)[MCl4] compounds are monoclinic and crystallize in the space group P2(1)/n. The crystals of the longer chain analogues [C12Py](2)[MCl4] are triclinic and crystallize in the space group P (1) over bar. Above the melting temperature, all compounds are ionic liquids (ILs). The derivatives with the longer C12 chain exhibit liquid crystallinity and the shorter chain compounds only show a melting transition. Consistent with single-crystal analysis, electron paramagnetic resonance spectroscopy suggests that the [CuCl4](2-) ions in the Cu-based ILs have a distorted tetrahedral geometry. KW - Ionic liquids KW - Alkylpyridinium salts KW - Structure elucidation KW - Phase transitions Y1 - 2017 U6 - https://doi.org/10.1002/ejic.201700826 SN - 1434-1948 SN - 1099-0682 SP - 5640 EP - 5649 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) JF - Chemistry central journal N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ((1)H, (13)C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. Y1 - 2011 U6 - https://doi.org/10.1186/1752-153X-5-23 SN - 1752-153X VL - 5 IS - 17 PB - BioMed Central CY - London ER - TY - GEN A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ( 1 H, 13 C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 369 KW - salts Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400905 ER - TY - JOUR A1 - Adebayo, Segun Emmanuel A1 - Hashim, Norhashila A1 - Hass, Roland A1 - Reich, Oliver A1 - Regen, Christian A1 - Münzberg, Marvin A1 - Abdan, Khalina A1 - Hanafi, Marsyita A1 - Zude-Sasse, Manuela T1 - Using absorption and reduced scattering coefficients for non-destructive analyses of fruit flesh firmness and soluble solids content in pear JF - Postharvest Biology and Technology N2 - Quality attributes of fruit determine its acceptability by the retailer and consumer. The objective of this work was to investigate the potential of absorption (μa) and reduced scattering (μs’) coefficients of European pear to analyze its fruit flesh firmness and soluble solids content (SSC). The absolute reference values, μa* (cm−1) and μs’* (cm−1), of pear were invasively measured, employing multi-spectral photon density wave (PDW) spectroscopy at preselected wavelengths of 515, 690, and 940 nm considering two batches of unripe and overripe fruit. On eight measuring dates during fruit development, μa and μs’ were analyzed non-destructively by means of laser light backscattering imaging (LLBI) at similar wavelengths of 532, 660, and 830 nm by means of fitting according to Farrell’s diffusion theory, using fix reference values of either μa* or μs’*. Both, the μa* and the μa as well as μs’* and μs’ showed similar trends. Considering the non-destructively measured data during fruit development, μa at 660 nm decreased 91 till 141 days after full bloom (dafb) from 1.49 cm−1 to 0.74 cm−1 due to chlorophyll degradation. At 830 nm, μa only slightly decreased from 0.41 cm−1 to 0.35 cm−1. The μs’ at all wavelengths revealed a decreasing trend as the fruit developed. The difference measured at 532 nm was most pronounced decreasing from 24 cm−1 to 10 cm−1, while at 660 nm and 830 nm values decreased from 15 cm−1 to 13 cm−1 and from 10 cm−1 to 8 cm−1, respectively. When building calibration models with partial least-squares regression analysis on the optical properties for non-destructive analysis of the fruit SSC, μa at 532 nm and 830 nm resulted in a correlation coefficient of R = 0.66, however, showing high measuring uncertainty. The combination of all three wavelengths gave an enhanced, encouraging R = 0.89 for firmness analysis using μs’ in the freshly picked fruit. KW - Absorption KW - Non-destructive KW - Pear KW - Quality KW - Scattering Y1 - 2017 U6 - https://doi.org/10.1016/j.postharvbio.2017.04.004 SN - 0925-5214 SN - 1873-2356 VL - 130 SP - 56 EP - 63 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Adelhelm, Philipp T1 - Novel carbon materials with hierarchical porosity : templating strategies and advanced characterization T1 - Neue Kohlenstoffmaterialien mit hierarchischer Porosität : Strategien der Templatierung und erweiterte Charakterisierung N2 - The aim of this work was the generation of carbon materials with high surface area, exhibiting a hierarchical pore system in the macro- and mesorange. Such a pore system facilitates the transport through the material and enhances the interaction with the carbon matrix (macropores are pores with diameters > 50 nm, mesopores between 2 – 50 nm). Thereto, new strategies for the synthesis of novel carbon materials with designed porosity were developed that are in particular useful for the storage of energy. Besides the porosity, it is the graphene structure itself that determines the properties of a carbon material. Non-graphitic carbon materials usually exhibit a quite large degree of disorder with many defects in the graphene structure, and thus exhibit inherent microporosity (d < 2nm). These pores are traps and oppose reversible interaction with the carbon matrix. Furthermore they reduce the stability and conductivity of the carbon material, which was undesired for the proposed applications. As one part of this work, the graphene structures of different non-graphitic carbon materials were studied in detail using a novel wide-angle x-ray scattering model that allowed precise information about the nature of the carbon building units (graphene stacks). Different carbon precursors were evaluated regarding their potential use for the synthesis shown in this work, whereas mesophase pitch proved to be advantageous when a less disordered carbon microstructure is desired. By using mesophase pitch as carbon precursor, two templating strategies were developed using the nanocasting approach. The synthesized (monolithic) materials combined for the first time the advantages of a hierarchical interconnected pore system in the macro- and mesorange with the advantages of mesophase pitch as carbon precursor. In the first case, hierarchical macro- / mesoporous carbon monoliths were synthesized by replication of hard (silica) templates. Thus, a suitable synthesis procedure was developed that allowed the infiltration of the template with the hardly soluble carbon precursor. In the second case, hierarchical macro- / mesoporous carbon materials were synthesized by a novel soft-templating technique, taking advantage of the phase separation (spinodal decomposition) between mesophase pitch and polystyrene. The synthesis also allowed the generation of monolithic samples and incorporation of functional nanoparticles into the material. The synthesized materials showed excellent properties as an anode material in lithium batteries and support material for supercapacitors. N2 - Kohlenstoffmaterialien finden aufgrund ihrer Vielseitigkeit heute in den unterschiedlichsten Bereichen des täglichen Lebens ihren Einsatz. Bekannte Beispiele sind Kohlenstofffasern in Verbundwerkstoffen, Graphit als trockenes Schmiermittel, oder Aktivkohlen in Filtersystemen. Ferner wird Graphit als Elektrodenmaterial auch in Lithium-Ionen-Batterien verwendet. Wegen knapper werdender Ressourcen von Öl und Gas wurde in den letzten Jahren verstärkt an der Entwicklung neuer Materialien für die Speicherung von Wasserstoff und elektrischer Energie gearbeitet. Die Nanotechnologie ist dabei auch für neue Kohlenstoffmaterialien zukunftsweisend, denn sie stellt weitere Anwendungsmöglichkeiten in Aussicht. In dieser Arbeit wurden hierzu mittels des sogenannten Nanocastings neue Kohlenstoffmaterialien für Energieanwendungen, insbesondere zur Speicherung von elektrischer Energie entwickelt. Die Eigenschaften eines Kohlenstoffmaterials beruhen im Wesentlichen auf der Struktur des Kohlenstoffs im molekularen Bereich. Die in dieser Arbeit hergestellten Materialen bestehen aus nichtgraphitischem Kohlenstoff und wurden im ersten Teil der Arbeit mit den Methoden der Röntgenstreuung genau untersucht. Eine speziell für diese Art von Kohlenstoffen kürzlich entwickelte Modellfunktion wurde dazu an die experimentellen Streubilder angepasst. Das verwendete Modell basiert dabei auf den wesentlichen Strukturmerkmalen von nichtgraphitischem Kohlenstoff und ermöglichte von daher eine detaillierte Beschreibung der Materialien. Im Gegensatz zu den meisten nichtgraphitischen Kohlenstoffen konnte gezeigt werden, dass die Verwendung von Mesophasen-Pech als Vorläufersubstanz (Precursor) ein Material mit vergleichsweise geringem Grad an Unordnung ermöglicht. Solch ein Material erlaubt eine ähnlich reversible Einlagerung von Lithium-Ionen wie Graphit, weist aber gleichzeitig wegen des nichtgraphitischen Charakters eine deutlich höhere Speicherfähigkeit auf. Zur Beschreibung der Porosität eines Materials verwendet man die Begriffe der Makro-, Meso-, und Mikroporen. Die Aktivität eines Materials kann durch die Erhöhung der Oberfläche noch erheblich gesteigert werden. Hohe Oberflächen können insbesondere durch die Schaffung von Poren im Nanometerbereich erzielt werden. Um die Zugänglichkeit zu diesen Poren zu steigern, weist ein Material idealerweise zusätzlich ein kontinuierliches makroporöses Transportsystem (Porendurchmesser d > 50 nm) auf. Solch eine Art von Porosität über mehrere Größenordnungen wird allgemein als „hierarchische Porosität“ bezeichnet. Für elektrochemische Anwendungen sind sogenannte Mesoporen (d = 2 – 50 nm) relevant, da noch kleinere Poren (Mikroporen, d < 2 nm) z.B. zu einer irreversiblen Bindung von Lithium- Ionen führen können. Wird Mesophasen-Pech als Kohlenstoffprekursor verwendet, kann die Entstehung dieser Mikroporen verhindert werden. Im zweiten und dritten Teil der Arbeit konnte mit den Methoden des „Nanocastings“ zum ersten Mal die spezielle Struktur des Mesophasen-Pech basierenden Kohlenstoffmaterials mit den Vorteilen einer hierarchischen (makro- / meso-) Porosität kombiniert werden. Im ersten Syntheseverfahren wurde dazu ein sogenanntes „hartes Templat“ mit entsprechender Porosität aus Siliziumdioxid repliziert. Aufgrund der hohen Viskosität des Pechs und der geringen Löslichkeit wurde dazu ein Verfahren entwickelt, das die Infiltration des Templates auch auf der Nanometerebene ermöglicht. Das Material konnte in Form größerer Körper (Monolithen) hergestellt werden, die im Vergleich zu Pulvern eine bessere technische Verwendung ermöglichen. Im zweiten Syntheseverfahren konnte die Herstellung eines hierarchisch makro- / mesoporösen Kohlenstoffmaterials erstmals mittels eines weichen Templates (organisches Polymer) erreicht werden. Die einfache Entfernung von weichen Templaten durch eine geeignete Temperaturbehandlung, macht dieses Verfahren im Vergleich zu hart templatierten Materialien kostengünstiger und stellt eine technische Umsetzung in Aussicht. Desweiteren erlaubt das Syntheseverfahren die Herstellung von monolithischen Körpern und die Einbindung funktionaler Nanopartikel. Die hergestellten Materialien zeigen exzellente Eigenschaften als Elektrodenmaterial in Lithium-Ionen-Batterien und als Trägermaterial für Superkondensatoren. KW - Mesoporosität KW - hierarchische Porosität KW - weiche und harte Templatierung KW - Kohlenstoffmaterialien KW - Weitwinkelröntgenstreuung KW - Mesoporosity KW - hierarchical porosity KW - soft and hard templating KW - carbon materials KW - wide-angle x-ray scattering Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15053 ER - TY - JOUR A1 - Adelsberger, Joseph A1 - Bivigou Koumba, Achille Mayelle A1 - Miasnikova, Anna A1 - Busch, Peter A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - Polystyrene-block-poly (methoxy diethylene glycol acrylate)-block-polystyrene triblock copolymers in aqueous solution-a SANS study of the temperature-induced switching behavior JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - A concentrated solution of a symmetric triblock copolymer with a thermoresponsive poly(methoxy diethylene glycol acrylate) (PMDEGA) middle block and short hydrophobic, fully deuterated polystyrene end blocks is investigated in D2O where it undergoes a lower critical solution temperature-type phase transition at ca. 36 A degrees C. Small-angle neutron scattering (SANS) in a wide temperature range (15-50 A degrees C) is used to characterize the size and inner structure of the micelles as well as the correlation between the micelles and the formation of aggregates by the micelles above the cloud point (CP). A model featuring spherical core-shell micelles, which are correlated by a hard-sphere potential or a sticky hard-sphere potential together with a Guinier form factor describing aggregates formed by the micelles above the CP, fits the SANS curves well in the entire temperature range. The thickness of the thermoresponsive micellar PMDEGA shell as well as the hard-sphere radius increase slightly already below the cloud point. Whereas the thickness of the thermoresponsive micellar shell hardly shrinks when heating through the CP and up to 50 A degrees C, the hard-sphere radius decreases within 3.5 K at the CP. The volume fraction decreases already significantly below the CP, which may be at the origin of the previously observed gel-sol transition far below the CP (Miasnikova et al., Langmuir 28: 4479-4490, 2012). Above the CP, small, and at higher temperatures, large aggregates are formed by the micelles. KW - Hydrogel KW - Thermoresponsive KW - LCST behavior KW - SANS Y1 - 2015 U6 - https://doi.org/10.1007/s00396-015-3535-6 SN - 0303-402X SN - 1435-1536 VL - 293 IS - 5 SP - 1515 EP - 1523 PB - Springer CY - New York ER - TY - JOUR A1 - Adelsberger, Joseph A1 - Grillo, Isabelle A1 - Kulkarni, Amit A1 - Sharp, Melissa A1 - Bivigou Koumba, Achille Mayelle A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - Kinetics of aggregation in micellar solutions of thermoresponsive triblock copolymers - influence of concentration, start and target temperatures JF - Soft matter N2 - In aqueous solution, symmetric triblock copolymers with a thermoresponsive middle block and hydrophobic end blocks form flower-like core-shell micelles which collapse and aggregate upon heating through the cloud point (CP). The collapse of the micellar shell and the intermicellar aggregation are followed in situ and in real-time using time-resolved small-angle neutron scattering (SANS), while heating micellar solutions of a poly((styrene-d(8))-b-(N-isopropyl acrylamide)-b-(styrene-d(8))) triblock copolymer in D2O rapidly through their CP. The influence of polymer concentration as well as of the start and target temperatures is addressed. In all cases, the micellar collapse is very fast. The collapsed micelles immediately form small clusters which contain voids. They densify which slows down or even stops their growth. For low concentrations and target temperatures just above the CP, i.e. shallow temperature jumps, the subsequent growth of the clusters is described by diffusion-limited aggregation. In contrast, for higher concentrations and/or higher target temperatures, i.e. deep temperature jumps, intermicellar bridges dominate the growth. Eventually, in all cases, the clusters coagulate which results in macroscopic phase separation. For shallow temperature jumps, the cluster surfaces stay rough; whereas for deep temperature jumps, a concentration gradient develops at late stages. These results are important for the development of conditions for thermal switching in applications, e.g. for the use of thermoresponsive micellar systems for transport and delivery purposes. Y1 - 2013 U6 - https://doi.org/10.1039/c2sm27152d SN - 1744-683X VL - 9 IS - 5 SP - 1685 EP - 1699 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Adelsberger, Joseph A1 - Kulkarni, Amit A1 - Jain, Abhinav A1 - Wang, Weinan A1 - Bivigou Koumba, Achille Mayelle A1 - Busch, Peter A1 - Pipich, Vitaliy A1 - Holderer, Olaf A1 - Hellweg, Thomas A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - Thermoresponsive PS-b-PNIPAM-b-PS micelles : aggregation behavior, segmental dynamics, and thermal response N2 - We have studied I lie thermal behavior of amphiphilic, symmetric triblock copolymers having short, deuterated polystyrene (PS) end blocks and a large poly(N-isopropylacrylarnicle) (PNIPAM) middle block exhibiting a lower critical solution temperature (LCST) in aqueous solution. A wide range of concentrations (0.1-300 mg/mL) is investigated using it number of analytical methods such as fluorescence correlation spectroscopy (FCS), turbidimetry, dynamic light scattering (DLS), small-angle neutron scattering (SANS), and neutron spin-echo spectroscopy (NSE). The critical micelle concentration is determined using FCS to be 1 mu M or less. The collapse of the micelles at the LCST is investigated using turbidimetry and DLS and shows a weak dependence on the degree of polymerization of the PNIPAM block. SANS with contrast matching allows its to reveal the core-shell Structure of the micelles as well as their correlation as a function of temperature. The segmental dynamics of the PNIPAM shell are studied as a function of temperature and arc found to be faster in the collapsed state than in the swollen state. The mode detected has a linear dispersion in q(2) and is found to be faster in the collapsed state as compared to the swollen state. We attribute this result to the averaging over mobile and immobilized segments. Y1 - 2010 UR - http://pubs.acs.org/journal/mamobx U6 - https://doi.org/10.1021/Ma902714p SN - 0024-9297 ER - TY - JOUR A1 - Adelsberger, Joseph A1 - Meier-Koll, Andreas A1 - Bivigou Koumba, Achille Mayelle A1 - Busch, Peter A1 - Holderer, Olaf A1 - Hellweg, Thomas A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - The collapse transition and the segmental dynamics in concentrated micellar solutions of P(S-b-NIPAM) diblock copolymers JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - We investigate concentrated solutions of poly(styrene-b-N-isopropyl acrylamide) (P(S-b-NIPAM)) diblock copolymers in deuterated water (D2O). Both structural changes and the changes of the segmental dynamics occurring upon heating through the lower critical solution temperature (LCST) of PNIPAM are studied using small-angle neutron scattering and neutron spin-echo spectroscopy. The collapse of the micellar shell and the cluster formation of collapsed micelles at the LCST as well as an increase of the segmental diffusion coefficient after crossing the LCST are detected. Comparing to our recent results on a triblock copolymer P(S-b-NIPAM-b-S) [25], we observe that the collapse transition of P(S-b-NIPAM) is more complex and that the PNIPAM segmental dynamics are faster than in P(S-b-NIPAM-b-S). KW - Block copolymers KW - Responsive polymers KW - Small-angle neutron scattering KW - Neutron spin-echo spectroscopy Y1 - 2011 U6 - https://doi.org/10.1007/s00396-011-2382-3 SN - 0303-402X VL - 289 IS - 5-6 SP - 711 EP - 720 PB - Springer CY - New York ER - TY - JOUR A1 - Adelsberger, Joseph A1 - Metwalli, Ezzeldin A1 - Diethert, Alexander A1 - Grillo, Isabelle A1 - Bivigou Koumba, Achille Mayelle A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - Kinetics of collapse transition and cluster formation in a thermoresponsive micellar solution of P(S-b-NIPAM-b-S) induced by a temperature jump JF - Macromolecular rapid communications N2 - Structural changes at the intra- as well as intermicellar level were induced by the LCST-type collapse transition of poly(N-isopropyl acrylamide) in ABA triblock copolymer micelles in water. The distinct process kinetics was followed in situ and in real-time using time-resolved small-angle neutron scattering (SANS), while a micellar solution of a triblock copolymer, consisting of two short deuterated polystyrene endblocks and a long thermoresponsive poly(N-isopropyl acrylamide) middle block, was heated rapidly above its cloud point. A very fast collapse together with a multistep aggregation behavior is observed. The findings of the transition occurring at several size and time levels may have implications for the design and application of such thermoresponsive self-assembled systems. KW - polymer physics KW - thermoresponsive polymers KW - small-angle neutron scattering KW - time-resolved measurements Y1 - 2012 U6 - https://doi.org/10.1002/marc.201100631 SN - 1022-1336 VL - 33 IS - 3 SP - 254 EP - 259 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Adem, Fozia A. A1 - Mbaveng, Armelle T. A1 - Kuete, Victor A1 - Heydenreich, Matthias A1 - Ndakala, Albert A1 - Irungu, Beatrice A1 - Yenesew, Abiy A1 - Efferth, Thomas T1 - Cytotoxicity of isoflavones and biflavonoids from Ormocarpum kirkii towards multi-factorial drug resistant cancer JF - Phytomedicine : international journal of phytotherapy and phytopharmacology N2 - Background: While incidences of cancer are continuously increasing, drug resistance of malignant cells is observed towards almost all pharmaceuticals. Several isoflavonoids and flavonoids are known for their cytotoxicity towards various cancer cells. Methods: The cytotoxicity of compounds was determined based on the resazurin reduction assay. Caspases activation was evaluated using the caspase-Glo assay. Flow cytometry was used to analyze the cell cycle (propodium iodide (PI) staining), apoptosis (annexin V/PI staining), mitochondrial membrane potential (MMP) (JC-1) and reactive oxygen species (ROS) (H2DCFH-DA). CCRF-CEM leukemia cells were used as model cells for mechanistic studies. Results: Compounds 1, 2 and 4 displayed IC50 values below 20 mu M towards CCRF-CEM and CEM/ADR5000 leukemia cells, and were further tested towards a panel of 7 carcinoma cells. The IC50 values of the compounds against carcinoma cells varied from 16.90 mu M (in resistant U87MG.Delta EGFR glioblastoma cells) to 48.67 mu M (against HepG2 hepatocarcinoma cells) for 1, from 7.85 mu M (in U87MG.Delta EGFR cells) to 14.44 mu M (in resistant MDA-MB231/BCRP breast adenocarcinoma cells) for 2, from 4.96 mu M (towards U87MG.Delta EGFRcells) to 7.76 mu M (against MDA-MB231/BCRP cells) for 4, and from 0.07 mu M (against MDA-MB231 cells) to 2.15 mu M (against HepG2 cells) for doxorubicin. Compounds 2 and 4 induced apoptosis in CCRF-CEM cells mediated by MMP alteration and increased ROS production. Conclusion: The present report indicates that isoflavones and biflavonoids from Ormocarpum kirkii are cytotoxic compounds with the potential of being exploited in cancer chemotherapy. Compounds 2 and 4 deserve further studies to develop new anticancer drugs to fight sensitive and resistant cancer cell lines. KW - Apoptosis KW - Cancer KW - Ormocarpum kirkii KW - Isoflavone KW - Biflavonoid KW - Multi-drug resistance Y1 - 2019 U6 - https://doi.org/10.1016/j.phymed.2019.152853 SN - 0944-7113 SN - 1618-095X VL - 58 PB - Elsevier CY - München ER -